****************************
Mopidy-Raspberry-GPIO
****************************
.. image:: https://img.shields.io/pypi/v/Mopidy-Raspberry-GPIO.svg
:target: https://pypi.org/project/Mopidy-Raspberry-GPIO/
:alt: Latest PyPI version
.. image:: https://img.shields.io/circleci/build/gh/pimoroni/mopidy-raspberry-gpio
:target: https://circleci.com/gh/pimoroni/mopidy-raspberry-gpio
:alt: CircleCI build status
.. image:: https://img.shields.io/codecov/c/gh/pimoroni/mopidy-raspberry-gpio
:target: https://codecov.io/gh/pimoroni/mopidy-raspberry-gpio
:alt: Test coverage
Mopidy extension for GPIO input on a Raspberry Pi
Installation
============
Ensure Mopidy has access to GPIO::
sudo usermod -a -G gpio mopidy
Install by running::
python3 -m pip install Mopidy-Raspberry-GPIO
Or, if available, install the Debian/Ubuntu package from `apt.mopidy.com
<https://apt.mopidy.com/>`_.
Configuration
=============
Before starting Mopidy, you must add configuration for
Mopidy-Raspberry-GPIO to your Mopidy configuration file::
[raspberry-gpio]
enabled = true
bcm5 = play_pause,active_low,250
bcm6 = volume_down,active_low,250
bcm16 = next,active_low,250
bcm20 = volume_up,active_low,250
Each bcmN entry corresponds to the BCM pin of that number.
You must assign an event, mode and bouncetime (ms) to your desired pins.
Supported events:
- play_pause
- volume_up
- volume_down
- next
- prev
Supported modes:
- active_low - configures the pin with a pull-up and triggers when it reads 0/low (RECOMMENDED)
- active_high - configures the pin as a pull-down and triggers when it reads 1/high
Events volume_up and volume_down both support an (optional) "step" option, which controls the amount (in percent) that the volume is adjusted with each button press.
Eg::
[raspberry-gpio]
enabled = true
bcm5 = play_pause,active_low,250
bcm6 = volume_down,active_low,250,step=1
bcm16 = next,active_low,250
bcm20 = volume_up,active_low,250,step=1
Project resources
=================
- `Source code <https://github.com/pimoroni/mopidy-raspberry-gpio>`_
- `Issue tracker <https://github.com/pimoroni/mopidy-raspberry-gpio/issues>`_
- `Changelog <https://github.com/pimoroni/mopidy-raspberry-gpio/blob/master/CHANGELOG.rst>`_
Credits
=======
- Original author: `Phil Howard <https://github.com/pimoroni>`__
- Current maintainer: `Phil Howard <https://github.com/pimoroni>`__
- `Contributors <https://github.com/pimoroni/mopidy-raspberry-gpio/graphs/contributors>`_