martin
/
protot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
protot/3rdparty/bgfx/3rdparty/freetype/freetype.h

117441 lines
4.9 MiB
Raw Blame History

#pragma once
#if defined(_MSC_VER) && !defined(__clang__)
# pragma warning(push)
# pragma warning(disable: 4100) // DISABLE warning C4100: '' : unreferenced formal parameter
# pragma warning(disable: 4146) // DISABLE warning C4146: unary minus operator applied to unsigned type, result still unsigned
# pragma warning(disable: 4244) // DISABLE warning C4244: '+=' : conversion from '__int64' to 'FT_ULong', possible loss of data
# pragma warning(disable: 4267) // DISABLE warning C4267: 'initializing' : conversion from 'size_t' to 'FT_Long', possible loss of data
# pragma warning(disable: 4700) // DISABLE warning C4700: uninitialized local variable 'temp' used
# pragma warning(disable: 4701) // DISABLE warning C4701: potentially uninitialized local variable '' used
#elif defined(__GNUC__)
# pragma GCC system_header
#elif defined(__clang__)
# pragma clang diagnostic ignored "-Wshift-negative-value"
# pragma clang diagnostic ignored "-Wuninitialized"
#endif // defined(__GNUC__)
/***************************************************************************/
/* */
/* ftsystem.c */
/* */
/* ANSI-specific FreeType low-level system interface (body). */
/* */
/* Copyright 1996-2002, 2006, 2008-2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file contains the default interface used by FreeType to access */
/* low-level, i.e. memory management, i/o access as well as thread */
/* synchronisation. It can be replaced by user-specific routines if */
/* necessary. */
/* */
/*************************************************************************/
/***************************************************************************/
/* */
/* ft2build.h */
/* */
/* FreeType 2 build and setup macros. */
/* (Generic version) */
/* */
/* Copyright 1996-2001, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file corresponds to the default `ft2build.h' file for */
/* FreeType 2. It uses the `freetype' include root. */
/* */
/* Note that specific platforms might use a different configuration. */
/* See builds/unix/ft2unix.h for an example. */
/* */
/*************************************************************************/
#ifndef __FT2_BUILD_GENERIC_H__
#define __FT2_BUILD_GENERIC_H__
/***************************************************************************/
/* */
/* ftheader.h */
/* */
/* Build macros of the FreeType 2 library. */
/* */
/* Copyright 1996-2008, 2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef __FT_HEADER_H__
#define __FT_HEADER_H__
/*@***********************************************************************/
/* */
/* <Macro> */
/* FT_BEGIN_HEADER */
/* */
/* <Description> */
/* This macro is used in association with @FT_END_HEADER in header */
/* files to ensure that the declarations within are properly */
/* encapsulated in an `extern "C" { .. }' block when included from a */
/* C++ compiler. */
/* */
#ifdef __cplusplus
#define FT_BEGIN_HEADER extern "C" {
#else
/* nothing */
#define FT_BEGIN_HEADER
#endif
/*@***********************************************************************/
/* */
/* <Macro> */
/* FT_END_HEADER */
/* */
/* <Description> */
/* This macro is used in association with @FT_BEGIN_HEADER in header */
/* files to ensure that the declarations within are properly */
/* encapsulated in an `extern "C" { .. }' block when included from a */
/* C++ compiler. */
/* */
#ifdef __cplusplus
#define FT_END_HEADER }
#else
/* nothing */
#define FT_END_HEADER
#endif
/*************************************************************************/
/* */
/* Aliases for the FreeType 2 public and configuration files. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Section> */
/* header_file_macros */
/* */
/* <Title> */
/* Header File Macros */
/* */
/* <Abstract> */
/* Macro definitions used to #include specific header files. */
/* */
/* <Description> */
/* The following macros are defined to the name of specific */
/* FreeType~2 header files. They can be used directly in #include */
/* statements as in: */
/* */
/* { */
/* #include FT_FREETYPE_H */
/* #include FT_MULTIPLE_MASTERS_H */
/* #include FT_GLYPH_H */
/* } */
/* */
/* There are several reasons why we are now using macros to name */
/* public header files. The first one is that such macros are not */
/* limited to the infamous 8.3~naming rule required by DOS (and */
/* `FT_MULTIPLE_MASTERS_H' is a lot more meaningful than `ftmm.h'). */
/* */
/* The second reason is that it allows for more flexibility in the */
/* way FreeType~2 is installed on a given system. */
/* */
/*************************************************************************/
/* configuration files */
/*************************************************************************
*
* @macro:
* FT_CONFIG_CONFIG_H
*
* @description:
* A macro used in #include statements to name the file containing
* FreeType~2 configuration data.
*
*/
#ifndef FT_CONFIG_CONFIG_H
#define FT_CONFIG_CONFIG_H <freetype/config/ftconfig.h>
#endif
/*************************************************************************
*
* @macro:
* FT_CONFIG_STANDARD_LIBRARY_H
*
* @description:
* A macro used in #include statements to name the file containing
* FreeType~2 interface to the standard C library functions.
*
*/
#ifndef FT_CONFIG_STANDARD_LIBRARY_H
#define FT_CONFIG_STANDARD_LIBRARY_H <freetype/config/ftstdlib.h>
#endif
/*************************************************************************
*
* @macro:
* FT_CONFIG_OPTIONS_H
*
* @description:
* A macro used in #include statements to name the file containing
* FreeType~2 project-specific configuration options.
*
*/
#ifndef FT_CONFIG_OPTIONS_H
#define FT_CONFIG_OPTIONS_H <freetype/config/ftoption.h>
#endif
/*************************************************************************
*
* @macro:
* FT_CONFIG_MODULES_H
*
* @description:
* A macro used in #include statements to name the file containing the
* list of FreeType~2 modules that are statically linked to new library
* instances in @FT_Init_FreeType.
*
*/
#ifndef FT_CONFIG_MODULES_H
#define FT_CONFIG_MODULES_H <freetype/config/ftmodule.h>
#endif
/* */
/* public headers */
/*************************************************************************
*
* @macro:
* FT_FREETYPE_H
*
* @description:
* A macro used in #include statements to name the file containing the
* base FreeType~2 API.
*
*/
#define FT_FREETYPE_H <freetype/freetype.h>
/*************************************************************************
*
* @macro:
* FT_ERRORS_H
*
* @description:
* A macro used in #include statements to name the file containing the
* list of FreeType~2 error codes (and messages).
*
* It is included by @FT_FREETYPE_H.
*
*/
#define FT_ERRORS_H <freetype/fterrors.h>
/*************************************************************************
*
* @macro:
* FT_MODULE_ERRORS_H
*
* @description:
* A macro used in #include statements to name the file containing the
* list of FreeType~2 module error offsets (and messages).
*
*/
#define FT_MODULE_ERRORS_H <freetype/ftmoderr.h>
/*************************************************************************
*
* @macro:
* FT_SYSTEM_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 interface to low-level operations (i.e., memory management
* and stream i/o).
*
* It is included by @FT_FREETYPE_H.
*
*/
#define FT_SYSTEM_H <freetype/ftsystem.h>
/*************************************************************************
*
* @macro:
* FT_IMAGE_H
*
* @description:
* A macro used in #include statements to name the file containing type
* definitions related to glyph images (i.e., bitmaps, outlines,
* scan-converter parameters).
*
* It is included by @FT_FREETYPE_H.
*
*/
#define FT_IMAGE_H <freetype/ftimage.h>
/*************************************************************************
*
* @macro:
* FT_TYPES_H
*
* @description:
* A macro used in #include statements to name the file containing the
* basic data types defined by FreeType~2.
*
* It is included by @FT_FREETYPE_H.
*
*/
#define FT_TYPES_H <freetype/fttypes.h>
/*************************************************************************
*
* @macro:
* FT_LIST_H
*
* @description:
* A macro used in #include statements to name the file containing the
* list management API of FreeType~2.
*
* (Most applications will never need to include this file.)
*
*/
#define FT_LIST_H <freetype/ftlist.h>
/*************************************************************************
*
* @macro:
* FT_OUTLINE_H
*
* @description:
* A macro used in #include statements to name the file containing the
* scalable outline management API of FreeType~2.
*
*/
#define FT_OUTLINE_H <freetype/ftoutln.h>
/*************************************************************************
*
* @macro:
* FT_SIZES_H
*
* @description:
* A macro used in #include statements to name the file containing the
* API which manages multiple @FT_Size objects per face.
*
*/
#define FT_SIZES_H <freetype/ftsizes.h>
/*************************************************************************
*
* @macro:
* FT_MODULE_H
*
* @description:
* A macro used in #include statements to name the file containing the
* module management API of FreeType~2.
*
*/
#define FT_MODULE_H <freetype/ftmodapi.h>
/*************************************************************************
*
* @macro:
* FT_RENDER_H
*
* @description:
* A macro used in #include statements to name the file containing the
* renderer module management API of FreeType~2.
*
*/
#define FT_RENDER_H <freetype/ftrender.h>
/*************************************************************************
*
* @macro:
* FT_AUTOHINTER_H
*
* @description:
* A macro used in #include statements to name the file containing
* structures and macros related to the auto-hinting module.
*
*/
#define FT_AUTOHINTER_H <freetype/ftautoh.h>
/*************************************************************************
*
* @macro:
* FT_TYPE1_TABLES_H
*
* @description:
* A macro used in #include statements to name the file containing the
* types and API specific to the Type~1 format.
*
*/
#define FT_TYPE1_TABLES_H <freetype/t1tables.h>
/*************************************************************************
*
* @macro:
* FT_TRUETYPE_IDS_H
*
* @description:
* A macro used in #include statements to name the file containing the
* enumeration values which identify name strings, languages, encodings,
* etc. This file really contains a _large_ set of constant macro
* definitions, taken from the TrueType and OpenType specifications.
*
*/
#define FT_TRUETYPE_IDS_H <freetype/ttnameid.h>
/*************************************************************************
*
* @macro:
* FT_TRUETYPE_TABLES_H
*
* @description:
* A macro used in #include statements to name the file containing the
* types and API specific to the TrueType (as well as OpenType) format.
*
*/
#define FT_TRUETYPE_TABLES_H <freetype/tttables.h>
/*************************************************************************
*
* @macro:
* FT_TRUETYPE_TAGS_H
*
* @description:
* A macro used in #include statements to name the file containing the
* definitions of TrueType four-byte `tags' which identify blocks in
* SFNT-based font formats (i.e., TrueType and OpenType).
*
*/
#define FT_TRUETYPE_TAGS_H <freetype/tttags.h>
/*************************************************************************
*
* @macro:
* FT_BDF_H
*
* @description:
* A macro used in #include statements to name the file containing the
* definitions of an API which accesses BDF-specific strings from a
* face.
*
*/
#define FT_BDF_H <freetype/ftbdf.h>
/*************************************************************************
*
* @macro:
* FT_CID_H
*
* @description:
* A macro used in #include statements to name the file containing the
* definitions of an API which access CID font information from a
* face.
*
*/
#define FT_CID_H <freetype/ftcid.h>
/*************************************************************************
*
* @macro:
* FT_GZIP_H
*
* @description:
* A macro used in #include statements to name the file containing the
* definitions of an API which supports gzip-compressed files.
*
*/
#define FT_GZIP_H <freetype/ftgzip.h>
/*************************************************************************
*
* @macro:
* FT_LZW_H
*
* @description:
* A macro used in #include statements to name the file containing the
* definitions of an API which supports LZW-compressed files.
*
*/
#define FT_LZW_H <freetype/ftlzw.h>
/*************************************************************************
*
* @macro:
* FT_BZIP2_H
*
* @description:
* A macro used in #include statements to name the file containing the
* definitions of an API which supports bzip2-compressed files.
*
*/
#define FT_BZIP2_H <freetype/ftbzip2.h>
/*************************************************************************
*
* @macro:
* FT_WINFONTS_H
*
* @description:
* A macro used in #include statements to name the file containing the
* definitions of an API which supports Windows FNT files.
*
*/
#define FT_WINFONTS_H <freetype/ftwinfnt.h>
/*************************************************************************
*
* @macro:
* FT_GLYPH_H
*
* @description:
* A macro used in #include statements to name the file containing the
* API of the optional glyph management component.
*
*/
#define FT_GLYPH_H <freetype/ftglyph.h>
/*************************************************************************
*
* @macro:
* FT_BITMAP_H
*
* @description:
* A macro used in #include statements to name the file containing the
* API of the optional bitmap conversion component.
*
*/
#define FT_BITMAP_H <freetype/ftbitmap.h>
/*************************************************************************
*
* @macro:
* FT_BBOX_H
*
* @description:
* A macro used in #include statements to name the file containing the
* API of the optional exact bounding box computation routines.
*
*/
#define FT_BBOX_H <freetype/ftbbox.h>
/*************************************************************************
*
* @macro:
* FT_CACHE_H
*
* @description:
* A macro used in #include statements to name the file containing the
* API of the optional FreeType~2 cache sub-system.
*
*/
#define FT_CACHE_H <freetype/ftcache.h>
/*************************************************************************
*
* @macro:
* FT_CACHE_IMAGE_H
*
* @description:
* A macro used in #include statements to name the file containing the
* `glyph image' API of the FreeType~2 cache sub-system.
*
* It is used to define a cache for @FT_Glyph elements. You can also
* use the API defined in @FT_CACHE_SMALL_BITMAPS_H if you only need to
* store small glyph bitmaps, as it will use less memory.
*
* This macro is deprecated. Simply include @FT_CACHE_H to have all
* glyph image-related cache declarations.
*
*/
#define FT_CACHE_IMAGE_H FT_CACHE_H
/*************************************************************************
*
* @macro:
* FT_CACHE_SMALL_BITMAPS_H
*
* @description:
* A macro used in #include statements to name the file containing the
* `small bitmaps' API of the FreeType~2 cache sub-system.
*
* It is used to define a cache for small glyph bitmaps in a relatively
* memory-efficient way. You can also use the API defined in
* @FT_CACHE_IMAGE_H if you want to cache arbitrary glyph images,
* including scalable outlines.
*
* This macro is deprecated. Simply include @FT_CACHE_H to have all
* small bitmaps-related cache declarations.
*
*/
#define FT_CACHE_SMALL_BITMAPS_H FT_CACHE_H
/*************************************************************************
*
* @macro:
* FT_CACHE_CHARMAP_H
*
* @description:
* A macro used in #include statements to name the file containing the
* `charmap' API of the FreeType~2 cache sub-system.
*
* This macro is deprecated. Simply include @FT_CACHE_H to have all
* charmap-based cache declarations.
*
*/
#define FT_CACHE_CHARMAP_H FT_CACHE_H
/*************************************************************************
*
* @macro:
* FT_MAC_H
*
* @description:
* A macro used in #include statements to name the file containing the
* Macintosh-specific FreeType~2 API. The latter is used to access
* fonts embedded in resource forks.
*
* This header file must be explicitly included by client applications
* compiled on the Mac (note that the base API still works though).
*
*/
#define FT_MAC_H <freetype/ftmac.h>
/*************************************************************************
*
* @macro:
* FT_MULTIPLE_MASTERS_H
*
* @description:
* A macro used in #include statements to name the file containing the
* optional multiple-masters management API of FreeType~2.
*
*/
#define FT_MULTIPLE_MASTERS_H <freetype/ftmm.h>
/*************************************************************************
*
* @macro:
* FT_SFNT_NAMES_H
*
* @description:
* A macro used in #include statements to name the file containing the
* optional FreeType~2 API which accesses embedded `name' strings in
* SFNT-based font formats (i.e., TrueType and OpenType).
*
*/
#define FT_SFNT_NAMES_H <freetype/ftsnames.h>
/*************************************************************************
*
* @macro:
* FT_OPENTYPE_VALIDATE_H
*
* @description:
* A macro used in #include statements to name the file containing the
* optional FreeType~2 API which validates OpenType tables (BASE, GDEF,
* GPOS, GSUB, JSTF).
*
*/
#define FT_OPENTYPE_VALIDATE_H <freetype/ftotval.h>
/*************************************************************************
*
* @macro:
* FT_GX_VALIDATE_H
*
* @description:
* A macro used in #include statements to name the file containing the
* optional FreeType~2 API which validates TrueTypeGX/AAT tables (feat,
* mort, morx, bsln, just, kern, opbd, trak, prop).
*
*/
#define FT_GX_VALIDATE_H <freetype/ftgxval.h>
/*************************************************************************
*
* @macro:
* FT_PFR_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which accesses PFR-specific data.
*
*/
#define FT_PFR_H <freetype/ftpfr.h>
/*************************************************************************
*
* @macro:
* FT_STROKER_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which provides functions to stroke outline paths.
*/
#define FT_STROKER_H <freetype/ftstroke.h>
/*************************************************************************
*
* @macro:
* FT_SYNTHESIS_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which performs artificial obliquing and emboldening.
*/
#define FT_SYNTHESIS_H <freetype/ftsynth.h>
/*************************************************************************
*
* @macro:
* FT_XFREE86_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which provides functions specific to the XFree86 and
* X.Org X11 servers.
*/
#define FT_XFREE86_H <freetype/ftxf86.h>
/*************************************************************************
*
* @macro:
* FT_TRIGONOMETRY_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which performs trigonometric computations (e.g.,
* cosines and arc tangents).
*/
#define FT_TRIGONOMETRY_H <freetype/fttrigon.h>
/*************************************************************************
*
* @macro:
* FT_LCD_FILTER_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which performs color filtering for subpixel rendering.
*/
#define FT_LCD_FILTER_H <freetype/ftlcdfil.h>
/*************************************************************************
*
* @macro:
* FT_UNPATENTED_HINTING_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which performs color filtering for subpixel rendering.
*/
#define FT_UNPATENTED_HINTING_H <freetype/ttunpat.h>
/*************************************************************************
*
* @macro:
* FT_INCREMENTAL_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which performs color filtering for subpixel rendering.
*/
#define FT_INCREMENTAL_H <freetype/ftincrem.h>
/*************************************************************************
*
* @macro:
* FT_GASP_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which returns entries from the TrueType GASP table.
*/
#define FT_GASP_H <freetype/ftgasp.h>
/*************************************************************************
*
* @macro:
* FT_ADVANCES_H
*
* @description:
* A macro used in #include statements to name the file containing the
* FreeType~2 API which returns individual and ranged glyph advances.
*/
#define FT_ADVANCES_H <freetype/ftadvanc.h>
/* */
#define FT_ERROR_DEFINITIONS_H <freetype/fterrdef.h>
/* The internals of the cache sub-system are no longer exposed. We */
/* default to FT_CACHE_H at the moment just in case, but we know of */
/* no rogue client that uses them. */
/* */
#define FT_CACHE_MANAGER_H <freetype/ftcache.h>
#define FT_CACHE_INTERNAL_MRU_H <freetype/ftcache.h>
#define FT_CACHE_INTERNAL_MANAGER_H <freetype/ftcache.h>
#define FT_CACHE_INTERNAL_CACHE_H <freetype/ftcache.h>
#define FT_CACHE_INTERNAL_GLYPH_H <freetype/ftcache.h>
#define FT_CACHE_INTERNAL_IMAGE_H <freetype/ftcache.h>
#define FT_CACHE_INTERNAL_SBITS_H <freetype/ftcache.h>
#define FT_INCREMENTAL_H <freetype/ftincrem.h>
#define FT_TRUETYPE_UNPATENTED_H <freetype/ttunpat.h>
/*
* Include internal headers definitions from <freetype/internal/...>
* only when building the library.
*/
#ifdef FT2_BUILD_LIBRARY
#define FT_INTERNAL_INTERNAL_H <freetype/internal/internal.h>
/***************************************************************************/
/* */
/* internal.h */
/* */
/* Internal header files (specification only). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is automatically included by `ft2build.h'. */
/* Do not include it manually! */
/* */
/*************************************************************************/
#define FT_INTERNAL_OBJECTS_H <freetype/internal/ftobjs.h>
#define FT_INTERNAL_PIC_H <freetype/internal/ftpic.h>
#define FT_INTERNAL_STREAM_H <freetype/internal/ftstream.h>
#define FT_INTERNAL_MEMORY_H <freetype/internal/ftmemory.h>
#define FT_INTERNAL_DEBUG_H <freetype/internal/ftdebug.h>
#define FT_INTERNAL_CALC_H <freetype/internal/ftcalc.h>
#define FT_INTERNAL_DRIVER_H <freetype/internal/ftdriver.h>
#define FT_INTERNAL_TRACE_H <freetype/internal/fttrace.h>
#define FT_INTERNAL_GLYPH_LOADER_H <freetype/internal/ftgloadr.h>
#define FT_INTERNAL_SFNT_H <freetype/internal/sfnt.h>
#define FT_INTERNAL_SERVICE_H <freetype/internal/ftserv.h>
#define FT_INTERNAL_RFORK_H <freetype/internal/ftrfork.h>
#define FT_INTERNAL_VALIDATE_H <freetype/internal/ftvalid.h>
#define FT_INTERNAL_TRUETYPE_TYPES_H <freetype/internal/tttypes.h>
#define FT_INTERNAL_TYPE1_TYPES_H <freetype/internal/t1types.h>
#define FT_INTERNAL_POSTSCRIPT_AUX_H <freetype/internal/psaux.h>
#define FT_INTERNAL_POSTSCRIPT_HINTS_H <freetype/internal/pshints.h>
#define FT_INTERNAL_POSTSCRIPT_GLOBALS_H <freetype/internal/psglobal.h>
#define FT_INTERNAL_AUTOHINT_H <freetype/internal/autohint.h>
/* END */
/* FT2_BUILD_LIBRARY */
#endif
/* __FT2_BUILD_H__ */
#endif
/* END */
/* __FT2_BUILD_GENERIC_H__ */
#endif
/* END */
/***************************************************************************/
/* */
/* ftconfig.h */
/* */
/* ANSI-specific configuration file (specification only). */
/* */
/* Copyright 1996-2004, 2006-2008, 2010-2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This header file contains a number of macro definitions that are used */
/* by the rest of the engine. Most of the macros here are automatically */
/* determined at compile time, and you should not need to change it to */
/* port FreeType, except to compile the library with a non-ANSI */
/* compiler. */
/* */
/* Note however that if some specific modifications are needed, we */
/* advise you to place a modified copy in your build directory. */
/* */
/* The build directory is usually `freetype/builds/<system>', and */
/* contains system-specific files that are always included first when */
/* building the library. */
/* */
/* This ANSI version should stay in `include/freetype/config'. */
/* */
/*************************************************************************/
#define __FTCONFIG_H__
/***************************************************************************/
/* */
/* ftoption.h */
/* */
/* User-selectable configuration macros (specification only). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTOPTION_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* USER-SELECTABLE CONFIGURATION MACROS */
/* */
/* This file contains the default configuration macro definitions for */
/* a standard build of the FreeType library. There are three ways to */
/* use this file to build project-specific versions of the library: */
/* */
/* - You can modify this file by hand, but this is not recommended in */
/* cases where you would like to build several versions of the */
/* library from a single source directory. */
/* */
/* - You can put a copy of this file in your build directory, more */
/* precisely in `$BUILD/freetype/config/ftoption.h', where `$BUILD' */
/* is the name of a directory that is included _before_ the FreeType */
/* include path during compilation. */
/* */
/* The default FreeType Makefiles and Jamfiles use the build */
/* directory `builds/<system>' by default, but you can easily change */
/* that for your own projects. */
/* */
/* - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it */
/* slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to */
/* locate this file during the build. For example, */
/* */
/* #define FT_CONFIG_OPTIONS_H <myftoptions.h> */
/* #include <freetype/config/ftheader.h> */
/* */
/* will use `$BUILD/myftoptions.h' instead of this file for macro */
/* definitions. */
/* */
/* Note also that you can similarly pre-define the macro */
/* FT_CONFIG_MODULES_H used to locate the file listing of the modules */
/* that are statically linked to the library at compile time. By */
/* default, this file is <freetype/config/ftmodule.h>. */
/* */
/* We highly recommend using the third method whenever possible. */
/* */
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** G E N E R A L F R E E T Y P E 2 C O N F I G U R A T I O N ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* Uncomment the line below if you want to activate sub-pixel rendering */
/* (a.k.a. LCD rendering, or ClearType) in this build of the library. */
/* */
/* Note that this feature is covered by several Microsoft patents */
/* and should not be activated in any default build of the library. */
/* */
/* This macro has no impact on the FreeType API, only on its */
/* _implementation_. For example, using FT_RENDER_MODE_LCD when calling */
/* FT_Render_Glyph still generates a bitmap that is 3 times wider than */
/* the original size in case this macro isn't defined; however, each */
/* triplet of subpixels has R=G=B. */
/* */
/* This is done to allow FreeType clients to run unmodified, forcing */
/* them to display normal gray-level anti-aliased glyphs. */
/* */
#define FT_CONFIG_OPTION_SUBPIXEL_RENDERING
/*************************************************************************/
/* */
/* Many compilers provide a non-ANSI 64-bit data type that can be used */
/* by FreeType to speed up some computations. However, this will create */
/* some problems when compiling the library in strict ANSI mode. */
/* */
/* For this reason, the use of 64-bit integers is normally disabled when */
/* the __STDC__ macro is defined. You can however disable this by */
/* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here. */
/* */
/* For most compilers, this will only create compilation warnings when */
/* building the library. */
/* */
/* ObNote: The compiler-specific 64-bit integers are detected in the */
/* file `ftconfig.h' either statically or through the */
/* `configure' script on supported platforms. */
/* */
#undef FT_CONFIG_OPTION_FORCE_INT64
/*************************************************************************/
/* */
/* If this macro is defined, do not try to use an assembler version of */
/* performance-critical functions (e.g. FT_MulFix). You should only do */
/* that to verify that the assembler function works properly, or to */
/* execute benchmark tests of the various implementations. */
/* #define FT_CONFIG_OPTION_NO_ASSEMBLER */
#undef FT_CONFIG_OPTION_NO_ASSEMBLER
/*************************************************************************/
/* */
/* If this macro is defined, try to use an inlined assembler version of */
/* the `FT_MulFix' function, which is a `hotspot' when loading and */
/* hinting glyphs, and which should be executed as fast as possible. */
/* */
/* Note that if your compiler or CPU is not supported, this will default */
/* to the standard and portable implementation found in `ftcalc.c'. */
/* */
#define FT_CONFIG_OPTION_INLINE_MULFIX
/*************************************************************************/
/* */
/* LZW-compressed file support. */
/* */
/* FreeType now handles font files that have been compressed with the */
/* `compress' program. This is mostly used to parse many of the PCF */
/* files that come with various X11 distributions. The implementation */
/* uses NetBSD's `zopen' to partially uncompress the file on the fly */
/* (see src/lzw/ftgzip.c). */
/* */
/* Define this macro if you want to enable this `feature'. */
/* */
/* #define FT_CONFIG_OPTION_USE_LZW */
#undef FT_CONFIG_OPTION_USE_LZW
/*************************************************************************/
/* */
/* Gzip-compressed file support. */
/* */
/* FreeType now handles font files that have been compressed with the */
/* `gzip' program. This is mostly used to parse many of the PCF files */
/* that come with XFree86. The implementation uses `zlib' to */
/* partially uncompress the file on the fly (see src/gzip/ftgzip.c). */
/* */
/* Define this macro if you want to enable this `feature'. See also */
/* the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below. */
/* */
/* #define FT_CONFIG_OPTION_USE_ZLIB */
#undef FT_CONFIG_OPTION_USE_ZLIB
/*************************************************************************/
/* */
/* ZLib library selection */
/* */
/* This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined. */
/* It allows FreeType's `ftgzip' component to link to the system's */
/* installation of the ZLib library. This is useful on systems like */
/* Unix or VMS where it generally is already available. */
/* */
/* If you let it undefined, the component will use its own copy */
/* of the zlib sources instead. These have been modified to be */
/* included directly within the component and *not* export external */
/* function names. This allows you to link any program with FreeType */
/* _and_ ZLib without linking conflicts. */
/* */
/* Do not #undef this macro here since the build system might define */
/* it for certain configurations only. */
/* */
/* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */
#undef FT_CONFIG_OPTION_SYSTEM_ZLIB
/*************************************************************************/
/* */
/* Bzip2-compressed file support. */
/* */
/* FreeType now handles font files that have been compressed with the */
/* `bzip2' program. This is mostly used to parse many of the PCF */
/* files that come with XFree86. The implementation uses `libbz2' to */
/* partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */
/* Contrary to gzip, bzip2 currently is not included and need to use */
/* the system available bzip2 implementation. */
/* */
/* Define this macro if you want to enable this `feature'. */
/* */
/* #define FT_CONFIG_OPTION_USE_BZIP2 */
#undef FT_CONFIG_OPTION_USE_BZIP2
/*************************************************************************/
/* */
/* Define to disable the use of file stream functions and types, FILE, */
/* fopen() etc. Enables the use of smaller system libraries on embedded */
/* systems that have multiple system libraries, some with or without */
/* file stream support, in the cases where file stream support is not */
/* necessary such as memory loading of font files. */
/* */
/* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */
#undef FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT
/*************************************************************************/
/* */
/* DLL export compilation */
/* */
/* When compiling FreeType as a DLL, some systems/compilers need a */
/* special keyword in front OR after the return type of function */
/* declarations. */
/* */
/* Two macros are used within the FreeType source code to define */
/* exported library functions: FT_EXPORT and FT_EXPORT_DEF. */
/* */
/* FT_EXPORT( return_type ) */
/* */
/* is used in a function declaration, as in */
/* */
/* FT_EXPORT( FT_Error ) */
/* FT_Init_FreeType( FT_Library* alibrary ); */
/* */
/* */
/* FT_EXPORT_DEF( return_type ) */
/* */
/* is used in a function definition, as in */
/* */
/* FT_EXPORT_DEF( FT_Error ) */
/* FT_Init_FreeType( FT_Library* alibrary ) */
/* { */
/* ... some code ... */
/* return FT_Err_Ok; */
/* } */
/* */
/* You can provide your own implementation of FT_EXPORT and */
/* FT_EXPORT_DEF here if you want. If you leave them undefined, they */
/* will be later automatically defined as `extern return_type' to */
/* allow normal compilation. */
/* */
/* Do not #undef these macros here since the build system might define */
/* them for certain configurations only. */
/* */
/* #define FT_EXPORT(x) extern x */
/* #define FT_EXPORT_DEF(x) x */
/*************************************************************************/
/* */
/* Glyph Postscript Names handling */
/* */
/* By default, FreeType 2 is compiled with the `psnames' module. This */
/* module is in charge of converting a glyph name string into a */
/* Unicode value, or return a Macintosh standard glyph name for the */
/* use with the TrueType `post' table. */
/* */
/* Undefine this macro if you do not want `psnames' compiled in your */
/* build of FreeType. This has the following effects: */
/* */
/* - The TrueType driver will provide its own set of glyph names, */
/* if you build it to support postscript names in the TrueType */
/* `post' table. */
/* */
/* - The Type 1 driver will not be able to synthesize a Unicode */
/* charmap out of the glyphs found in the fonts. */
/* */
/* You would normally undefine this configuration macro when building */
/* a version of FreeType that doesn't contain a Type 1 or CFF driver. */
/* */
#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES
/*************************************************************************/
/* */
/* Postscript Names to Unicode Values support */
/* */
/* By default, FreeType 2 is built with the `PSNames' module compiled */
/* in. Among other things, the module is used to convert a glyph name */
/* into a Unicode value. This is especially useful in order to */
/* synthesize on the fly a Unicode charmap from the CFF/Type 1 driver */
/* through a big table named the `Adobe Glyph List' (AGL). */
/* */
/* Undefine this macro if you do not want the Adobe Glyph List */
/* compiled in your `PSNames' module. The Type 1 driver will not be */
/* able to synthesize a Unicode charmap out of the glyphs found in the */
/* fonts. */
/* */
#define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST
/*************************************************************************/
/* */
/* Support for Mac fonts */
/* */
/* Define this macro if you want support for outline fonts in Mac */
/* format (mac dfont, mac resource, macbinary containing a mac */
/* resource) on non-Mac platforms. */
/* */
/* Note that the `FOND' resource isn't checked. */
/* */
#define FT_CONFIG_OPTION_MAC_FONTS
/*************************************************************************/
/* */
/* Guessing methods to access embedded resource forks */
/* */
/* Enable extra Mac fonts support on non-Mac platforms (e.g. */
/* GNU/Linux). */
/* */
/* Resource forks which include fonts data are stored sometimes in */
/* locations which users or developers don't expected. In some cases, */
/* resource forks start with some offset from the head of a file. In */
/* other cases, the actual resource fork is stored in file different */
/* from what the user specifies. If this option is activated, */
/* FreeType tries to guess whether such offsets or different file */
/* names must be used. */
/* */
/* Note that normal, direct access of resource forks is controlled via */
/* the FT_CONFIG_OPTION_MAC_FONTS option. */
/* */
#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK
/*************************************************************************/
/* */
/* Allow the use of FT_Incremental_Interface to load typefaces that */
/* contain no glyph data, but supply it via a callback function. */
/* This is required by clients supporting document formats which */
/* supply font data incrementally as the document is parsed, such */
/* as the Ghostscript interpreter for the PostScript language. */
/* */
#define FT_CONFIG_OPTION_INCREMENTAL
/*************************************************************************/
/* */
/* The size in bytes of the render pool used by the scan-line converter */
/* to do all of its work. */
/* */
/* This must be greater than 4KByte if you use FreeType to rasterize */
/* glyphs; otherwise, you may set it to zero to avoid unnecessary */
/* allocation of the render pool. */
/* */
#define FT_RENDER_POOL_SIZE 16384L
/*************************************************************************/
/* */
/* FT_MAX_MODULES */
/* */
/* The maximum number of modules that can be registered in a single */
/* FreeType library object. 32 is the default. */
/* */
#define FT_MAX_MODULES 32
/*************************************************************************/
/* */
/* Debug level */
/* */
/* FreeType can be compiled in debug or trace mode. In debug mode, */
/* errors are reported through the `ftdebug' component. In trace */
/* mode, additional messages are sent to the standard output during */
/* execution. */
/* */
/* Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode. */
/* Define FT_DEBUG_LEVEL_TRACE to build it in trace mode. */
/* */
/* Don't define any of these macros to compile in `release' mode! */
/* */
/* Do not #undef these macros here since the build system might define */
/* them for certain configurations only. */
/* */
/* #define FT_DEBUG_LEVEL_ERROR */
/* #define FT_DEBUG_LEVEL_TRACE */
#undef FT_DEBUG_LEVEL_ERROR
#undef FT_DEBUG_LEVEL_TRACE
/*************************************************************************/
/* */
/* Autofitter debugging */
/* */
/* If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to */
/* control the autofitter behaviour for debugging purposes with global */
/* boolean variables (consequently, you should *never* enable this */
/* while compiling in `release' mode): */
/* */
/* _af_debug_disable_horz_hints */
/* _af_debug_disable_vert_hints */
/* _af_debug_disable_blue_hints */
/* */
/* Additionally, the following functions provide dumps of various */
/* internal autofit structures to stdout (using `printf'): */
/* */
/* af_glyph_hints_dump_points */
/* af_glyph_hints_dump_segments */
/* af_glyph_hints_dump_edges */
/* */
/* As an argument, they use another global variable: */
/* */
/* _af_debug_hints */
/* */
/* Please have a look at the `ftgrid' demo program to see how those */
/* variables and macros should be used. */
/* */
/* Do not #undef these macros here since the build system might define */
/* them for certain configurations only. */
/* */
/* #define FT_DEBUG_AUTOFIT */
#undef FT_DEBUG_AUTOFIT
/*************************************************************************/
/* */
/* Memory Debugging */
/* */
/* FreeType now comes with an integrated memory debugger that is */
/* capable of detecting simple errors like memory leaks or double */
/* deletes. To compile it within your build of the library, you */
/* should define FT_DEBUG_MEMORY here. */
/* */
/* Note that the memory debugger is only activated at runtime when */
/* when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */
/* */
/* Do not #undef this macro here since the build system might define */
/* it for certain configurations only. */
/* */
/* #define FT_DEBUG_MEMORY */
#undef FT_DEBUG_MEMORY
/*************************************************************************/
/* */
/* Module errors */
/* */
/* If this macro is set (which is _not_ the default), the higher byte */
/* of an error code gives the module in which the error has occurred, */
/* while the lower byte is the real error code. */
/* */
/* Setting this macro makes sense for debugging purposes only, since */
/* it would break source compatibility of certain programs that use */
/* FreeType 2. */
/* */
/* More details can be found in the files ftmoderr.h and fterrors.h. */
/* */
#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS
/*************************************************************************/
/* */
/* Position Independent Code */
/* */
/* If this macro is set (which is _not_ the default), FreeType2 will */
/* avoid creating constants that require address fixups. Instead the */
/* constants will be moved into a struct and additional intialization */
/* code will be used. */
/* */
/* Setting this macro is needed for systems that prohibit address */
/* fixups, such as BREW. */
/* */
/* #define FT_CONFIG_OPTION_PIC */
#undef FT_CONFIG_OPTION_PIC
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** S F N T D R I V E R C O N F I G U R A T I O N ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support */
/* embedded bitmaps in all formats using the SFNT module (namely */
/* TrueType & OpenType). */
/* */
#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to */
/* load and enumerate the glyph Postscript names in a TrueType or */
/* OpenType file. */
/* */
/* Note that when you do not compile the `PSNames' module by undefining */
/* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will */
/* contain additional code used to read the PS Names table from a font. */
/* */
/* (By default, the module uses `PSNames' to extract glyph names.) */
/* */
#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to */
/* access the internal name table in a SFNT-based format like TrueType */
/* or OpenType. The name table contains various strings used to */
/* describe the font, like family name, copyright, version, etc. It */
/* does not contain any glyph name though. */
/* */
/* Accessing SFNT names is done through the functions declared in */
/* `freetype/ftsnames.h'. */
/* */
#define TT_CONFIG_OPTION_SFNT_NAMES
/*************************************************************************/
/* */
/* TrueType CMap support */
/* */
/* Here you can fine-tune which TrueType CMap table format shall be */
/* supported. */
#define TT_CONFIG_CMAP_FORMAT_0
#define TT_CONFIG_CMAP_FORMAT_2
#define TT_CONFIG_CMAP_FORMAT_4
#define TT_CONFIG_CMAP_FORMAT_6
#define TT_CONFIG_CMAP_FORMAT_8
#define TT_CONFIG_CMAP_FORMAT_10
#define TT_CONFIG_CMAP_FORMAT_12
#define TT_CONFIG_CMAP_FORMAT_13
#define TT_CONFIG_CMAP_FORMAT_14
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile */
/* a bytecode interpreter in the TrueType driver. */
/* */
/* By undefining this, you will only compile the code necessary to load */
/* TrueType glyphs without hinting. */
/* */
/* Do not #undef this macro here, since the build system might */
/* define it for certain configurations only. */
/* */
#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile */
/* EXPERIMENTAL subpixel hinting support into the TrueType driver. This */
/* replaces the native TrueType hinting mechanism when anything but */
/* FT_RENDER_MODE_MONO is requested. */
/* */
/* Enabling this causes the TrueType driver to ignore instructions under */
/* certain conditions. This is done in accordance with the guide here, */
/* with some minor differences: */
/* */
/* http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */
/* */
/* By undefining this, you only compile the code necessary to hint */
/* TrueType glyphs with native TT hinting. */
/* */
/* This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be */
/* defined. */
/* */
/* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING */
#undef TT_CONFIG_OPTION_SUBPIXEL_HINTING
/*************************************************************************/
/* */
/* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version */
/* of the TrueType bytecode interpreter is used that doesn't implement */
/* any of the patented opcodes and algorithms. The patents related to */
/* TrueType hinting have expired worldwide since May 2010; this option */
/* is now deprecated. */
/* */
/* Note that the TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored* */
/* if you define TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words, */
/* either define TT_CONFIG_OPTION_BYTECODE_INTERPRETER or */
/* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time. */
/* */
/* This macro is only useful for a small number of font files (mostly */
/* for Asian scripts) that require bytecode interpretation to properly */
/* load glyphs. For all other fonts, this produces unpleasant results, */
/* thus the unpatented interpreter is never used to load glyphs from */
/* TrueType fonts unless one of the following two options is used. */
/* */
/* - The unpatented interpreter is explicitly activated by the user */
/* through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag */
/* when opening the FT_Face. */
/* */
/* - FreeType detects that the FT_Face corresponds to one of the */
/* `trick' fonts (e.g., `Mingliu') it knows about. The font engine */
/* contains a hard-coded list of font names and other matching */
/* parameters (see function `tt_face_init' in file */
/* `src/truetype/ttobjs.c'). */
/* */
/* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */
/* */
/* { */
/* FT_Parameter parameter; */
/* FT_Open_Args open_args; */
/* */
/* */
/* parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING; */
/* */
/* open_args.flags = FT_OPEN_PATHNAME | FT_OPEN_PARAMS; */
/* open_args.pathname = my_font_pathname; */
/* open_args.num_params = 1; */
/* open_args.params = &parameter; */
/* */
/* error = FT_Open_Face( library, &open_args, index, &face ); */
/* ... */
/* } */
/* */
/* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */
#undef TT_CONFIG_OPTION_UNPATENTED_HINTING
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_INTERPRETER_SWITCH to compile the TrueType */
/* bytecode interpreter with a huge switch statement, rather than a call */
/* table. This results in smaller and faster code for a number of */
/* architectures. */
/* */
/* Note however that on some compiler/processor combinations, undefining */
/* this macro will generate faster, though larger, code. */
/* */
#define TT_CONFIG_OPTION_INTERPRETER_SWITCH
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the */
/* TrueType glyph loader to use Apple's definition of how to handle */
/* component offsets in composite glyphs. */
/* */
/* Apple and MS disagree on the default behavior of component offsets */
/* in composites. Apple says that they should be scaled by the scaling */
/* factors in the transformation matrix (roughly, it's more complex) */
/* while MS says they should not. OpenType defines two bits in the */
/* composite flags array which can be used to disambiguate, but old */
/* fonts will not have them. */
/* */
/* http://www.microsoft.com/typography/otspec/glyf.htm */
/* http://fonts.apple.com/TTRefMan/RM06/Chap6glyf.html */
/* */
#undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include */
/* support for Apple's distortable font technology (fvar, gvar, cvar, */
/* and avar tables). This has many similarities to Type 1 Multiple */
/* Masters support. */
/* */
#define TT_CONFIG_OPTION_GX_VAR_SUPPORT
/*************************************************************************/
/* */
/* Define TT_CONFIG_OPTION_BDF if you want to include support for */
/* an embedded `BDF ' table within SFNT-based bitmap formats. */
/* */
#define TT_CONFIG_OPTION_BDF
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and */
/* arrays in the Type 1 stream (see t1load.c). A minimum of 4 is */
/* required. */
/* */
#define T1_MAX_DICT_DEPTH 5
/*************************************************************************/
/* */
/* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */
/* calls during glyph loading. */
/* */
#define T1_MAX_SUBRS_CALLS 16
/*************************************************************************/
/* */
/* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */
/* minimum of 16 is required. */
/* */
/* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */
/* */
#define T1_MAX_CHARSTRINGS_OPERANDS 256
/*************************************************************************/
/* */
/* Define this configuration macro if you want to prevent the */
/* compilation of `t1afm', which is in charge of reading Type 1 AFM */
/* files into an existing face. Note that if set, the T1 driver will be */
/* unable to produce kerning distances. */
/* */
#undef T1_CONFIG_OPTION_NO_AFM
/*************************************************************************/
/* */
/* Define this configuration macro if you want to prevent the */
/* compilation of the Multiple Masters font support in the Type 1 */
/* driver. */
/* */
#undef T1_CONFIG_OPTION_NO_MM_SUPPORT
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** A U T O F I T M O D U L E C O N F I G U R A T I O N ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* Compile autofit module with CJK (Chinese, Japanese, Korean) script */
/* support. */
/* */
#define AF_CONFIG_OPTION_CJK
/*************************************************************************/
/* */
/* Compile autofit module with Indic script support. */
/* */
#define AF_CONFIG_OPTION_INDIC
/*************************************************************************/
/* */
/* Compile autofit module with warp hinting. The idea of the warping */
/* code is to slightly scale and shift a glyph within a single dimension */
/* so that as much of its segments are aligned (more or less) on the */
/* grid. To find out the optimal scaling and shifting value, various */
/* parameter combinations are tried and scored. */
/* */
/* This experimental option is only active if the render mode is */
/* FT_RENDER_MODE_LIGHT. */
/* */
/* #define AF_CONFIG_OPTION_USE_WARPER */
#undef AF_CONFIG_OPTION_USE_WARPER
/* */
/*
* Define this variable if you want to keep the layout of internal
* structures that was used prior to FreeType 2.2. This also compiles in
* a few obsolete functions to avoid linking problems on typical Unix
* distributions.
*
* For embedded systems or building a new distribution from scratch, it
* is recommended to disable the macro since it reduces the library's code
* size and activates a few memory-saving optimizations as well.
*/
/* #define FT_CONFIG_OPTION_OLD_INTERNALS*/
#undef FT_CONFIG_OPTION_OLD_INTERNALS
/*
* To detect legacy cache-lookup call from a rogue client (<= 2.1.7),
* we restrict the number of charmaps in a font. The current API of
* FTC_CMapCache_Lookup() takes cmap_index & charcode, but old API
* takes charcode only. To determine the passed value is for cmap_index
* or charcode, the possible cmap_index is restricted not to exceed
* the minimum possible charcode by a rogue client. It is also very
* unlikely that a rogue client is interested in Unicode values 0 to 15.
*
* NOTE: The original threshold was 4 deduced from popular number of
* cmap subtables in UCS-4 TrueType fonts, but now it is not
* irregular for OpenType fonts to have more than 4 subtables,
* because variation selector subtables are available for Apple
* and Microsoft platforms.
*/
/*
* This macro is defined if either unpatented or native TrueType
* hinting is requested by the definitions above.
*/
#define TT_USE_BYTECODE_INTERPRETER
#undef TT_CONFIG_OPTION_UNPATENTED_HINTING
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftstdlib.h */
/* */
/* ANSI-specific library and header configuration file (specification */
/* only). */
/* */
/* Copyright 2002-2007, 2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to group all #includes to the ANSI C library that */
/* FreeType normally requires. It also defines macros to rename the */
/* standard functions within the FreeType source code. */
/* */
/* Load a file which defines __FTSTDLIB_H__ before this one to override */
/* it. */
/* */
/*************************************************************************/
#define __FTSTDLIB_H__
#include <stddef.h>
#define ft_ptrdiff_t ptrdiff_t
/**********************************************************************/
/* */
/* integer limits */
/* */
/* UINT_MAX and ULONG_MAX are used to automatically compute the size */
/* of `int' and `long' in bytes at compile-time. So far, this works */
/* for all platforms the library has been tested on. */
/* */
/* Note that on the extremely rare platforms that do not provide */
/* integer types that are _exactly_ 16 and 32 bits wide (e.g. some */
/* old Crays where `int' is 36 bits), we do not make any guarantee */
/* about the correct behaviour of FT2 with all fonts. */
/* */
/* In these case, `ftconfig.h' will refuse to compile anyway with a */
/* message like `couldn't find 32-bit type' or something similar. */
/* */
/**********************************************************************/
#include <limits.h>
#define FT_CHAR_BIT CHAR_BIT
#define FT_USHORT_MAX USHRT_MAX
#define FT_INT_MAX INT_MAX
#define FT_INT_MIN INT_MIN
#define FT_UINT_MAX UINT_MAX
#define FT_ULONG_MAX ULONG_MAX
/**********************************************************************/
/* */
/* character and string processing */
/* */
/**********************************************************************/
#include <string.h>
#define ft_memchr memchr
#define ft_memcmp memcmp
#define ft_memcpy memcpy
#define ft_memmove memmove
#define ft_memset memset
#define ft_strcat strcat
#define ft_strcmp strcmp
#define ft_strcpy strcpy
#define ft_strlen strlen
#define ft_strncmp strncmp
#define ft_strncpy strncpy
#define ft_strrchr strrchr
#define ft_strstr strstr
/**********************************************************************/
/* */
/* file handling */
/* */
/**********************************************************************/
#include <stdio.h>
#define FT_FILE FILE
#define ft_fclose fclose
#define ft_fopen fopen
#define ft_fread fread
#define ft_fseek fseek
#define ft_ftell ftell
#define ft_sprintf sprintf
/**********************************************************************/
/* */
/* sorting */
/* */
/**********************************************************************/
#include <stdlib.h>
#define ft_qsort qsort
/**********************************************************************/
/* */
/* memory allocation */
/* */
/**********************************************************************/
#define ft_scalloc calloc
#define ft_sfree free
#define ft_smalloc malloc
#define ft_srealloc realloc
/**********************************************************************/
/* */
/* miscellaneous */
/* */
/**********************************************************************/
#define ft_atol atol
#define ft_labs labs
/**********************************************************************/
/* */
/* execution control */
/* */
/**********************************************************************/
#include <setjmp.h>
/* note: this cannot be a typedef since */
#define ft_jmp_buf jmp_buf
/* jmp_buf is defined as a macro */
/* on certain platforms */
#define ft_longjmp longjmp
/* same thing here */
#define ft_setjmp( b ) setjmp( *(ft_jmp_buf*) &(b) )
/* the following is only used for debugging purposes, i.e., if */
/* FT_DEBUG_LEVEL_ERROR or FT_DEBUG_LEVEL_TRACE are defined */
#include <stdarg.h>
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* PLATFORM-SPECIFIC CONFIGURATION MACROS */
/* */
/* These macros can be toggled to suit a specific system. The current */
/* ones are defaults used to compile FreeType in an ANSI C environment */
/* (16bit compilers are also supported). Copy this file to your own */
/* `freetype/builds/<system>' directory, and edit it to port the engine. */
/* */
/*************************************************************************/
/* There are systems (like the Texas Instruments 'C54x) where a `char' */
/* has 16 bits. ANSI C says that sizeof(char) is always 1. Since an */
/* `int' has 16 bits also for this system, sizeof(int) gives 1 which */
/* is probably unexpected. */
/* */
/* `CHAR_BIT' (defined in limits.h) gives the number of bits in a */
/* `char' type. */
#ifndef FT_CHAR_BIT
#define FT_CHAR_BIT CHAR_BIT
#endif
/* The size of an `int' type. */
#if FT_UINT_MAX == 0xFFFFUL
#define FT_SIZEOF_INT (16 / FT_CHAR_BIT)
#elif FT_UINT_MAX == 0xFFFFFFFFUL
#define FT_SIZEOF_INT (32 / FT_CHAR_BIT)
#elif FT_UINT_MAX > 0xFFFFFFFFUL && FT_UINT_MAX == 0xFFFFFFFFFFFFFFFFUL
#define FT_SIZEOF_INT (64 / FT_CHAR_BIT)
#else
#error "Unsupported size of `int' type!"
#endif
/* The size of a `long' type. A five-byte `long' (as used e.g. on the */
/* DM642) is recognized but avoided. */
#if FT_ULONG_MAX == 0xFFFFFFFFUL
#define FT_SIZEOF_LONG (32 / FT_CHAR_BIT)
#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFUL
#define FT_SIZEOF_LONG (32 / FT_CHAR_BIT)
#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFFFFFFFUL
#define FT_SIZEOF_LONG (64 / FT_CHAR_BIT)
#else
#error "Unsupported size of `long' type!"
#endif
/* FT_UNUSED is a macro used to indicate that a given parameter is not */
/* used -- this is only used to get rid of unpleasant compiler warnings */
#ifndef FT_UNUSED
#define FT_UNUSED( arg ) ( (arg) = (arg) )
#endif
/*************************************************************************/
/* */
/* AUTOMATIC CONFIGURATION MACROS */
/* */
/* These macros are computed from the ones defined above. Don't touch */
/* their definition, unless you know precisely what you are doing. No */
/* porter should need to mess with them. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* Mac support */
/* */
/* This is the only necessary change, so it is defined here instead */
/* providing a new configuration file. */
/* */
#if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) )
/* no Carbon frameworks for 64bit 10.4.x */
/* AvailabilityMacros.h is available since Mac OS X 10.2, */
/* so guess the system version by maximum errno before inclusion */
#include <errno.h>
/* defined since 10.2 */
#ifdef ECANCELED
#include "AvailabilityMacros.h"
#endif
#if defined( __LP64__ ) && \
( MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4 )
#undef FT_MACINTOSH
#endif
#elif defined( __SC__ ) || defined( __MRC__ )
/* Classic MacOS compilers */
#include "ConditionalMacros.h"
#if TARGET_OS_MAC
#define FT_MACINTOSH 1
#endif
#endif
/*************************************************************************/
/* */
/* <Section> */
/* basic_types */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Type> */
/* FT_Int16 */
/* */
/* <Description> */
/* A typedef for a 16bit signed integer type. */
/* */
typedef signed short FT_Int16;
/*************************************************************************/
/* */
/* <Type> */
/* FT_UInt16 */
/* */
/* <Description> */
/* A typedef for a 16bit unsigned integer type. */
/* */
typedef unsigned short FT_UInt16;
/* */
/* this #if 0 ... #endif clause is for documentation purposes */
#if 0
/*************************************************************************/
/* */
/* <Type> */
/* FT_Int32 */
/* */
/* <Description> */
/* A typedef for a 32bit signed integer type. The size depends on */
/* the configuration. */
/* */
typedef signed XXX FT_Int32;
/*************************************************************************/
/* */
/* <Type> */
/* FT_UInt32 */
/* */
/* A typedef for a 32bit unsigned integer type. The size depends on */
/* the configuration. */
/* */
typedef unsigned XXX FT_UInt32;
/* */
#endif
#if FT_SIZEOF_INT == (32 / FT_CHAR_BIT)
typedef signed int FT_Int32;
typedef unsigned int FT_UInt32;
#elif FT_SIZEOF_LONG == (32 / FT_CHAR_BIT)
typedef signed long FT_Int32;
typedef unsigned long FT_UInt32;
#else
#error "no 32bit type found -- please check your configuration files"
#endif
/* look up an integer type that is at least 32 bits */
#if FT_SIZEOF_INT >= (32 / FT_CHAR_BIT)
typedef int FT_Fast;
typedef unsigned int FT_UFast;
#elif FT_SIZEOF_LONG >= (32 / FT_CHAR_BIT)
typedef long FT_Fast;
typedef unsigned long FT_UFast;
#endif
/* determine whether we have a 64-bit int type for platforms without */
/* Autoconf */
#if FT_SIZEOF_LONG == (64 / FT_CHAR_BIT)
/* FT_LONG64 must be defined if a 64-bit type is available */
#define FT_LONG64
#define FT_INT64 long
/* Visual C++ (and Intel C++) */
#elif defined( _MSC_VER ) && _MSC_VER >= 900
/* this compiler provides the __int64 type */
#define FT_LONG64
#define FT_INT64 __int64
/* Borland C++ */
#elif defined( __BORLANDC__ )
/* XXXX: We should probably check the value of __BORLANDC__ in order */
/* to test the compiler version. */
/* this compiler provides the __int64 type */
#define FT_LONG64
#define FT_INT64 __int64
/* Watcom C++ */
#elif defined( __WATCOMC__ )
/* Watcom doesn't provide 64-bit data types */
/* Metrowerks CodeWarrior */
#elif defined( __MWERKS__ )
#define FT_LONG64
#define FT_INT64 long long int
#elif defined( __GNUC__ )
/* GCC provides the `long long' type */
#define FT_LONG64
#define FT_INT64 long long int
/* FT_SIZEOF_LONG == (64 / FT_CHAR_BIT) */
#endif
/*************************************************************************/
/* */
/* A 64-bit data type will create compilation problems if you compile */
/* in strict ANSI mode. To avoid them, we disable its use if __STDC__ */
/* is defined. You can however ignore this rule by defining the */
/* FT_CONFIG_OPTION_FORCE_INT64 configuration macro. */
/* */
#if defined( FT_LONG64 ) && !defined( FT_CONFIG_OPTION_FORCE_INT64 )
#ifdef __STDC__
/* undefine the 64-bit macros in strict ANSI compilation mode */
#undef FT_LONG64
#undef FT_INT64
/* __STDC__ */
#endif
/* FT_LONG64 && !FT_CONFIG_OPTION_FORCE_INT64 */
#endif
#define FT_BEGIN_STMNT do {
#define FT_END_STMNT } while ( 0 )
#define FT_DUMMY_STMNT FT_BEGIN_STMNT FT_END_STMNT
/* Provide assembler fragments for performance-critical functions. */
/* These must be defined `static __inline__' with GCC. */
/* RVCT */
#if defined( __CC_ARM ) || defined( __ARMCC__ )
#define FT_MULFIX_ASSEMBLER FT_MulFix_arm
/* documentation is in freetype.h */
static __inline FT_Int32
FT_MulFix_arm( FT_Int32 a,
FT_Int32 b )
{
register FT_Int32 t, t2;
__asm
{
/* (lo=t2,hi=t) = a*b */
smull t2, t, b, a
/* a = (hi >> 31) */
mov a, t, asr #31
/* a += 0x8000 */
add a, a, #0x8000
/* t2 += a */
adds t2, t2, a
/* t += carry */
adc t, t, #0
/* a = t2 >> 16 */
mov a, t2, lsr #16
/* a |= t << 16 */
orr a, a, t, lsl #16
}
return a;
}
/* __CC_ARM || __ARMCC__ */
#endif
#ifdef __GNUC__
#if defined( __arm__ ) && !defined( __thumb__ ) && \
!( defined( __CC_ARM ) || defined( __ARMCC__ ) )
#define FT_MULFIX_ASSEMBLER FT_MulFix_arm
/* documentation is in freetype.h */
static __inline__ FT_Int32
FT_MulFix_arm( FT_Int32 a,
FT_Int32 b )
{
register FT_Int32 t, t2;
__asm__ __volatile__ (
/* (lo=%1,hi=%2) = a*b */
"smull %1, %2, %4, %3\n\t"
/* %0 = (hi >> 31) */
"mov %0, %2, asr #31\n\t"
/* %0 += 0x8000 */
"add %0, %0, #0x8000\n\t"
/* %1 += %0 */
"adds %1, %1, %0\n\t"
/* %2 += carry */
"adc %2, %2, #0\n\t"
/* %0 = %1 >> 16 */
"mov %0, %1, lsr #16\n\t"
/* %0 |= %2 << 16 */
"orr %0, %0, %2, lsl #16\n\t"
: "=r"(a), "=&r"(t2), "=&r"(t)
: "r"(a), "r"(b)
: "cc" );
return a;
}
/* __arm__ && !__thumb__ && !( __CC_ARM || __ARMCC__ ) */
#endif
#if defined( __i386__ )
#define FT_MULFIX_ASSEMBLER FT_MulFix_i386
/* documentation is in freetype.h */
static __inline__ FT_Int32
FT_MulFix_i386( FT_Int32 a,
FT_Int32 b )
{
register FT_Int32 result;
__asm__ __volatile__ (
"imul %%edx\n"
"movl %%edx, %%ecx\n"
"sarl $31, %%ecx\n"
"addl $0x8000, %%ecx\n"
"addl %%ecx, %%eax\n"
"adcl $0, %%edx\n"
"shrl $16, %%eax\n"
"shll $16, %%edx\n"
"addl %%edx, %%eax\n"
: "=a"(result), "=d"(b)
: "a"(a), "d"(b)
: "%ecx", "cc" );
return result;
}
/* i386 */
#endif
/* __GNUC__ */
#endif
/* Visual C++ */
#ifdef _MSC_VER
#ifdef _M_IX86
#define FT_MULFIX_ASSEMBLER FT_MulFix_i386
/* documentation is in freetype.h */
static __inline FT_Int32
FT_MulFix_i386( FT_Int32 a,
FT_Int32 b )
{
register FT_Int32 result;
__asm
{
mov eax, a
mov edx, b
imul edx
mov ecx, edx
sar ecx, 31
add ecx, 8000h
add eax, ecx
adc edx, 0
shr eax, 16
shl edx, 16
add eax, edx
mov result, eax
}
return result;
}
/* _M_IX86 */
#endif
/* _MSC_VER */
#endif
#ifdef FT_MULFIX_ASSEMBLER
#define FT_MULFIX_INLINED FT_MULFIX_ASSEMBLER
#endif
#ifdef FT_MAKE_OPTION_SINGLE_OBJECT
#define FT_LOCAL( x ) static x
#define FT_LOCAL_DEF( x ) static x
#else
#ifdef __cplusplus
#define FT_LOCAL( x ) extern "C" x
#define FT_LOCAL_DEF( x ) extern "C" x
#else
#define FT_LOCAL( x ) extern x
#define FT_LOCAL_DEF( x ) x
#endif
/* FT_MAKE_OPTION_SINGLE_OBJECT */
#endif
#ifndef FT_BASE
#ifdef __cplusplus
#define FT_BASE( x ) extern "C" x
#else
#define FT_BASE( x ) extern x
#endif
/* !FT_BASE */
#endif
#ifndef FT_BASE_DEF
#ifdef __cplusplus
#define FT_BASE_DEF( x ) x
#else
#define FT_BASE_DEF( x ) x
#endif
/* !FT_BASE_DEF */
#endif
#ifndef FT_EXPORT
#ifdef __cplusplus
#define FT_EXPORT( x ) extern "C" x
#else
#define FT_EXPORT( x ) extern x
#endif
/* !FT_EXPORT */
#endif
#ifndef FT_EXPORT_DEF
#ifdef __cplusplus
#define FT_EXPORT_DEF( x ) extern "C" x
#else
#define FT_EXPORT_DEF( x ) extern x
#endif
/* !FT_EXPORT_DEF */
#endif
#ifndef FT_EXPORT_VAR
#ifdef __cplusplus
#define FT_EXPORT_VAR( x ) extern "C" x
#else
#define FT_EXPORT_VAR( x ) extern x
#endif
/* !FT_EXPORT_VAR */
#endif
/* The following macros are needed to compile the library with a */
/* C++ compiler and with 16bit compilers. */
/* */
/* This is special. Within C++, you must specify `extern "C"' for */
/* functions which are used via function pointers, and you also */
/* must do that for structures which contain function pointers to */
/* assure C linkage -- it's not possible to have (local) anonymous */
/* functions which are accessed by (global) function pointers. */
/* */
/* */
/* FT_CALLBACK_DEF is used to _define_ a callback function. */
/* */
/* FT_CALLBACK_TABLE is used to _declare_ a constant variable that */
/* contains pointers to callback functions. */
/* */
/* FT_CALLBACK_TABLE_DEF is used to _define_ a constant variable */
/* that contains pointers to callback functions. */
/* */
/* */
/* Some 16bit compilers have to redefine these macros to insert */
/* the infamous `_cdecl' or `__fastcall' declarations. */
/* */
#ifndef FT_CALLBACK_DEF
#ifdef __cplusplus
#define FT_CALLBACK_DEF( x ) extern "C" x
#else
#define FT_CALLBACK_DEF( x ) static x
#endif
/* FT_CALLBACK_DEF */
#endif
#ifndef FT_CALLBACK_TABLE
#ifdef __cplusplus
#define FT_CALLBACK_TABLE extern "C"
#define FT_CALLBACK_TABLE_DEF extern "C"
#else
#define FT_CALLBACK_TABLE extern
/* nothing */
#define FT_CALLBACK_TABLE_DEF
#endif
/* FT_CALLBACK_TABLE */
#endif
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftdebug.h */
/* */
/* Debugging and logging component (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2006, 2007, 2008, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/* */
/* IMPORTANT: A description of FreeType's debugging support can be */
/* found in `docs/DEBUG.TXT'. Read it if you need to use or */
/* understand this code. */
/* */
/***************************************************************************/
#define __FTDEBUG_H__
/***************************************************************************/
/* */
/* freetype.h */
/* */
/* FreeType high-level API and common types (specification only). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FREETYPE_H__
#ifndef FT_FREETYPE_H
#error "`ft2build.h' hasn't been included yet!"
#error "Please always use macros to include FreeType header files."
#error "Example:"
#error " #include <ft2build.h>"
#error " #include FT_FREETYPE_H"
#endif
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/***************************************************************************/
/* */
/* ftmoderr.h */
/* */
/* FreeType module error offsets (specification). */
/* */
/* Copyright 2001, 2002, 2003, 2004, 2005, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the FreeType module error offsets. */
/* */
/* The lower byte gives the error code, the higher byte gives the */
/* module. The base module has error offset 0. For example, the error */
/* `FT_Err_Invalid_File_Format' has value 0x003, the error */
/* `TT_Err_Invalid_File_Format' has value 0x1103, the error */
/* `T1_Err_Invalid_File_Format' has value 0x1203, etc. */
/* */
/* Undefine the macro FT_CONFIG_OPTION_USE_MODULE_ERRORS in ftoption.h */
/* to make the higher byte always zero (disabling the module error */
/* mechanism). */
/* */
/* It can also be used to create a module error message table easily */
/* with something like */
/* */
/* { */
/* #undef __FTMODERR_H__ */
/* #define FT_MODERRDEF( e, v, s ) { FT_Mod_Err_ ## e, s }, */
/* #define FT_MODERR_START_LIST { */
/* #define FT_MODERR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int mod_err_offset; */
/* const char* mod_err_msg */
/* } ft_mod_errors[] = */
/* */
/* #include FT_MODULE_ERRORS_H */
/* } */
/* */
/* To use such a table, all errors must be ANDed with 0xFF00 to remove */
/* the error code. */
/* */
/*************************************************************************/
#define __FTMODERR_H__
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#ifndef FT_MODERRDEF
#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = 0,
#define FT_MODERR_START_LIST enum {
#define FT_MODERR_END_LIST FT_Mod_Err_Max };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_MODERRDEF */
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST MODULE ERROR BASES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_MODERR_START_LIST
FT_MODERR_START_LIST
#endif
FT_MODERRDEF( Base, 0x000, "base module" )
FT_MODERRDEF( Autofit, 0x100, "autofitter module" )
FT_MODERRDEF( BDF, 0x200, "BDF module" )
FT_MODERRDEF( Bzip2, 0x300, "Bzip2 module" )
FT_MODERRDEF( Cache, 0x400, "cache module" )
FT_MODERRDEF( CFF, 0x500, "CFF module" )
FT_MODERRDEF( CID, 0x600, "CID module" )
FT_MODERRDEF( Gzip, 0x700, "Gzip module" )
FT_MODERRDEF( LZW, 0x800, "LZW module" )
FT_MODERRDEF( OTvalid, 0x900, "OpenType validation module" )
FT_MODERRDEF( PCF, 0xA00, "PCF module" )
FT_MODERRDEF( PFR, 0xB00, "PFR module" )
FT_MODERRDEF( PSaux, 0xC00, "PS auxiliary module" )
FT_MODERRDEF( PShinter, 0xD00, "PS hinter module" )
FT_MODERRDEF( PSnames, 0xE00, "PS names module" )
FT_MODERRDEF( Raster, 0xF00, "raster module" )
FT_MODERRDEF( SFNT, 0x1000, "SFNT module" )
FT_MODERRDEF( Smooth, 0x1100, "smooth raster module" )
FT_MODERRDEF( TrueType, 0x1200, "TrueType module" )
FT_MODERRDEF( Type1, 0x1300, "Type 1 module" )
FT_MODERRDEF( Type42, 0x1400, "Type 42 module" )
FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" )
#ifdef FT_MODERR_END_LIST
FT_MODERR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_MODERR_START_LIST
#undef FT_MODERR_END_LIST
#undef FT_MODERRDEF
#undef FT_NEED_EXTERN_C
/* END */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/***************************************************************************/
/* */
/* fttypes.h */
/* */
/* FreeType simple types definitions (specification only). */
/* */
/* Copyright 1996-2002, 2004, 2006-2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTTYPES_H__
/***************************************************************************/
/* */
/* ftsystem.h */
/* */
/* FreeType low-level system interface definition (specification). */
/* */
/* Copyright 1996-2001, 2002, 2005, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTSYSTEM_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* system_interface */
/* */
/* <Title> */
/* System Interface */
/* */
/* <Abstract> */
/* How FreeType manages memory and i/o. */
/* */
/* <Description> */
/* This section contains various definitions related to memory */
/* management and i/o access. You need to understand this */
/* information if you want to use a custom memory manager or you own */
/* i/o streams. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* M E M O R Y M A N A G E M E N T */
/* */
/*************************************************************************/
/*************************************************************************
*
* @type:
* FT_Memory
*
* @description:
* A handle to a given memory manager object, defined with an
* @FT_MemoryRec structure.
*
*/
typedef struct FT_MemoryRec_* FT_Memory;
/*************************************************************************
*
* @functype:
* FT_Alloc_Func
*
* @description:
* A function used to allocate `size' bytes from `memory'.
*
* @input:
* memory ::
* A handle to the source memory manager.
*
* size ::
* The size in bytes to allocate.
*
* @return:
* Address of new memory block. 0~in case of failure.
*
*/
typedef void*
(*FT_Alloc_Func)( FT_Memory memory,
long size );
/*************************************************************************
*
* @functype:
* FT_Free_Func
*
* @description:
* A function used to release a given block of memory.
*
* @input:
* memory ::
* A handle to the source memory manager.
*
* block ::
* The address of the target memory block.
*
*/
typedef void
(*FT_Free_Func)( FT_Memory memory,
void* block );
/*************************************************************************
*
* @functype:
* FT_Realloc_Func
*
* @description:
* A function used to re-allocate a given block of memory.
*
* @input:
* memory ::
* A handle to the source memory manager.
*
* cur_size ::
* The block's current size in bytes.
*
* new_size ::
* The block's requested new size.
*
* block ::
* The block's current address.
*
* @return:
* New block address. 0~in case of memory shortage.
*
* @note:
* In case of error, the old block must still be available.
*
*/
typedef void*
(*FT_Realloc_Func)( FT_Memory memory,
long cur_size,
long new_size,
void* block );
/*************************************************************************
*
* @struct:
* FT_MemoryRec
*
* @description:
* A structure used to describe a given memory manager to FreeType~2.
*
* @fields:
* user ::
* A generic typeless pointer for user data.
*
* alloc ::
* A pointer type to an allocation function.
*
* free ::
* A pointer type to an memory freeing function.
*
* realloc ::
* A pointer type to a reallocation function.
*
*/
struct FT_MemoryRec_
{
void* user;
FT_Alloc_Func alloc;
FT_Free_Func free;
FT_Realloc_Func realloc;
};
/*************************************************************************/
/* */
/* I / O M A N A G E M E N T */
/* */
/*************************************************************************/
/*************************************************************************
*
* @type:
* FT_Stream
*
* @description:
* A handle to an input stream.
*
*/
typedef struct FT_StreamRec_* FT_Stream;
/*************************************************************************
*
* @struct:
* FT_StreamDesc
*
* @description:
* A union type used to store either a long or a pointer. This is used
* to store a file descriptor or a `FILE*' in an input stream.
*
*/
typedef union FT_StreamDesc_
{
long value;
void* pointer;
} FT_StreamDesc;
/*************************************************************************
*
* @functype:
* FT_Stream_IoFunc
*
* @description:
* A function used to seek and read data from a given input stream.
*
* @input:
* stream ::
* A handle to the source stream.
*
* offset ::
* The offset of read in stream (always from start).
*
* buffer ::
* The address of the read buffer.
*
* count ::
* The number of bytes to read from the stream.
*
* @return:
* The number of bytes effectively read by the stream.
*
* @note:
* This function might be called to perform a seek or skip operation
* with a `count' of~0. A non-zero return value then indicates an
* error.
*
*/
typedef unsigned long
(*FT_Stream_IoFunc)( FT_Stream stream,
unsigned long offset,
unsigned char* buffer,
unsigned long count );
/*************************************************************************
*
* @functype:
* FT_Stream_CloseFunc
*
* @description:
* A function used to close a given input stream.
*
* @input:
* stream ::
* A handle to the target stream.
*
*/
typedef void
(*FT_Stream_CloseFunc)( FT_Stream stream );
/*************************************************************************
*
* @struct:
* FT_StreamRec
*
* @description:
* A structure used to describe an input stream.
*
* @input:
* base ::
* For memory-based streams, this is the address of the first stream
* byte in memory. This field should always be set to NULL for
* disk-based streams.
*
* size ::
* The stream size in bytes.
*
* pos ::
* The current position within the stream.
*
* descriptor ::
* This field is a union that can hold an integer or a pointer. It is
* used by stream implementations to store file descriptors or `FILE*'
* pointers.
*
* pathname ::
* This field is completely ignored by FreeType. However, it is often
* useful during debugging to use it to store the stream's filename
* (where available).
*
* read ::
* The stream's input function.
*
* close ::
* The stream's close function.
*
* memory ::
* The memory manager to use to preload frames. This is set
* internally by FreeType and shouldn't be touched by stream
* implementations.
*
* cursor ::
* This field is set and used internally by FreeType when parsing
* frames.
*
* limit ::
* This field is set and used internally by FreeType when parsing
* frames.
*
*/
typedef struct FT_StreamRec_
{
unsigned char* base;
unsigned long size;
unsigned long pos;
FT_StreamDesc descriptor;
FT_StreamDesc pathname;
FT_Stream_IoFunc read;
FT_Stream_CloseFunc close;
FT_Memory memory;
unsigned char* cursor;
unsigned char* limit;
} FT_StreamRec;
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftimage.h */
/* */
/* FreeType glyph image formats and default raster interface */
/* (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, */
/* 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* Note: A `raster' is simply a scan-line converter, used to render */
/* FT_Outlines into FT_Bitmaps. */
/* */
/*************************************************************************/
#define __FTIMAGE_H__
/* _STANDALONE_ is from ftgrays.c */
#ifndef _STANDALONE_
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* basic_types */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Type> */
/* FT_Pos */
/* */
/* <Description> */
/* The type FT_Pos is used to store vectorial coordinates. Depending */
/* on the context, these can represent distances in integer font */
/* units, or 16.16, or 26.6 fixed float pixel coordinates. */
/* */
typedef signed long FT_Pos;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Vector */
/* */
/* <Description> */
/* A simple structure used to store a 2D vector; coordinates are of */
/* the FT_Pos type. */
/* */
/* <Fields> */
/* x :: The horizontal coordinate. */
/* y :: The vertical coordinate. */
/* */
typedef struct FT_Vector_
{
FT_Pos x;
FT_Pos y;
} FT_Vector;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_BBox */
/* */
/* <Description> */
/* A structure used to hold an outline's bounding box, i.e., the */
/* coordinates of its extrema in the horizontal and vertical */
/* directions. */
/* */
/* <Fields> */
/* xMin :: The horizontal minimum (left-most). */
/* */
/* yMin :: The vertical minimum (bottom-most). */
/* */
/* xMax :: The horizontal maximum (right-most). */
/* */
/* yMax :: The vertical maximum (top-most). */
/* */
/* <Note> */
/* The bounding box is specified with the coordinates of the lower */
/* left and the upper right corner. In PostScript, those values are */
/* often called (llx,lly) and (urx,ury), respectively. */
/* */
/* If `yMin' is negative, this value gives the glyph's descender. */
/* Otherwise, the glyph doesn't descend below the baseline. */
/* Similarly, if `ymax' is positive, this value gives the glyph's */
/* ascender. */
/* */
/* `xMin' gives the horizontal distance from the glyph's origin to */
/* the left edge of the glyph's bounding box. If `xMin' is negative, */
/* the glyph extends to the left of the origin. */
/* */
typedef struct FT_BBox_
{
FT_Pos xMin, yMin;
FT_Pos xMax, yMax;
} FT_BBox;
/*************************************************************************/
/* */
/* <Enum> */
/* FT_Pixel_Mode */
/* */
/* <Description> */
/* An enumeration type used to describe the format of pixels in a */
/* given bitmap. Note that additional formats may be added in the */
/* future. */
/* */
/* <Values> */
/* FT_PIXEL_MODE_NONE :: */
/* Value~0 is reserved. */
/* */
/* FT_PIXEL_MODE_MONO :: */
/* A monochrome bitmap, using 1~bit per pixel. Note that pixels */
/* are stored in most-significant order (MSB), which means that */
/* the left-most pixel in a byte has value 128. */
/* */
/* FT_PIXEL_MODE_GRAY :: */
/* An 8-bit bitmap, generally used to represent anti-aliased glyph */
/* images. Each pixel is stored in one byte. Note that the number */
/* of `gray' levels is stored in the `num_grays' field of the */
/* @FT_Bitmap structure (it generally is 256). */
/* */
/* FT_PIXEL_MODE_GRAY2 :: */
/* A 2-bit per pixel bitmap, used to represent embedded */
/* anti-aliased bitmaps in font files according to the OpenType */
/* specification. We haven't found a single font using this */
/* format, however. */
/* */
/* FT_PIXEL_MODE_GRAY4 :: */
/* A 4-bit per pixel bitmap, representing embedded anti-aliased */
/* bitmaps in font files according to the OpenType specification. */
/* We haven't found a single font using this format, however. */
/* */
/* FT_PIXEL_MODE_LCD :: */
/* An 8-bit bitmap, representing RGB or BGR decimated glyph images */
/* used for display on LCD displays; the bitmap is three times */
/* wider than the original glyph image. See also */
/* @FT_RENDER_MODE_LCD. */
/* */
/* FT_PIXEL_MODE_LCD_V :: */
/* An 8-bit bitmap, representing RGB or BGR decimated glyph images */
/* used for display on rotated LCD displays; the bitmap is three */
/* times taller than the original glyph image. See also */
/* @FT_RENDER_MODE_LCD_V. */
/* */
typedef enum FT_Pixel_Mode_
{
FT_PIXEL_MODE_NONE = 0,
FT_PIXEL_MODE_MONO,
FT_PIXEL_MODE_GRAY,
FT_PIXEL_MODE_GRAY2,
FT_PIXEL_MODE_GRAY4,
FT_PIXEL_MODE_LCD,
FT_PIXEL_MODE_LCD_V,
/* do not remove */
FT_PIXEL_MODE_MAX
} FT_Pixel_Mode;
/*************************************************************************/
/* */
/* <Enum> */
/* ft_pixel_mode_xxx */
/* */
/* <Description> */
/* A list of deprecated constants. Use the corresponding */
/* @FT_Pixel_Mode values instead. */
/* */
/* <Values> */
/* ft_pixel_mode_none :: See @FT_PIXEL_MODE_NONE. */
/* ft_pixel_mode_mono :: See @FT_PIXEL_MODE_MONO. */
/* ft_pixel_mode_grays :: See @FT_PIXEL_MODE_GRAY. */
/* ft_pixel_mode_pal2 :: See @FT_PIXEL_MODE_GRAY2. */
/* ft_pixel_mode_pal4 :: See @FT_PIXEL_MODE_GRAY4. */
/* */
#define ft_pixel_mode_none FT_PIXEL_MODE_NONE
#define ft_pixel_mode_mono FT_PIXEL_MODE_MONO
#define ft_pixel_mode_grays FT_PIXEL_MODE_GRAY
#define ft_pixel_mode_pal2 FT_PIXEL_MODE_GRAY2
#define ft_pixel_mode_pal4 FT_PIXEL_MODE_GRAY4
/* */
#if 0
/*************************************************************************/
/* */
/* <Enum> */
/* FT_Palette_Mode */
/* */
/* <Description> */
/* THIS TYPE IS DEPRECATED. DO NOT USE IT! */
/* */
/* An enumeration type to describe the format of a bitmap palette, */
/* used with ft_pixel_mode_pal4 and ft_pixel_mode_pal8. */
/* */
/* <Values> */
/* ft_palette_mode_rgb :: The palette is an array of 3-byte RGB */
/* records. */
/* */
/* ft_palette_mode_rgba :: The palette is an array of 4-byte RGBA */
/* records. */
/* */
/* <Note> */
/* As ft_pixel_mode_pal2, pal4 and pal8 are currently unused by */
/* FreeType, these types are not handled by the library itself. */
/* */
typedef enum FT_Palette_Mode_
{
ft_palette_mode_rgb = 0,
ft_palette_mode_rgba,
/* do not remove */
ft_palette_mode_max
} FT_Palette_Mode;
/* */
#endif
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Bitmap */
/* */
/* <Description> */
/* A structure used to describe a bitmap or pixmap to the raster. */
/* Note that we now manage pixmaps of various depths through the */
/* `pixel_mode' field. */
/* */
/* <Fields> */
/* rows :: The number of bitmap rows. */
/* */
/* width :: The number of pixels in bitmap row. */
/* */
/* pitch :: The pitch's absolute value is the number of bytes */
/* taken by one bitmap row, including padding. */
/* However, the pitch is positive when the bitmap has */
/* a `down' flow, and negative when it has an `up' */
/* flow. In all cases, the pitch is an offset to add */
/* to a bitmap pointer in order to go down one row. */
/* */
/* Note that `padding' means the alignment of a */
/* bitmap to a byte border, and FreeType functions */
/* normally align to the smallest possible integer */
/* value. */
/* */
/* For the B/W rasterizer, `pitch' is always an even */
/* number. */
/* */
/* To change the pitch of a bitmap (say, to make it a */
/* multiple of 4), use @FT_Bitmap_Convert. */
/* Alternatively, you might use callback functions to */
/* directly render to the application's surface; see */
/* the file `example2.cpp' in the tutorial for a */
/* demonstration. */
/* */
/* buffer :: A typeless pointer to the bitmap buffer. This */
/* value should be aligned on 32-bit boundaries in */
/* most cases. */
/* */
/* num_grays :: This field is only used with */
/* @FT_PIXEL_MODE_GRAY; it gives the number of gray */
/* levels used in the bitmap. */
/* */
/* pixel_mode :: The pixel mode, i.e., how pixel bits are stored. */
/* See @FT_Pixel_Mode for possible values. */
/* */
/* palette_mode :: This field is intended for paletted pixel modes; */
/* it indicates how the palette is stored. Not */
/* used currently. */
/* */
/* palette :: A typeless pointer to the bitmap palette; this */
/* field is intended for paletted pixel modes. Not */
/* used currently. */
/* */
/* <Note> */
/* For now, the only pixel modes supported by FreeType are mono and */
/* grays. However, drivers might be added in the future to support */
/* more `colorful' options. */
/* */
typedef struct FT_Bitmap_
{
int rows;
int width;
int pitch;
unsigned char* buffer;
short num_grays;
char pixel_mode;
char palette_mode;
void* palette;
} FT_Bitmap;
/*************************************************************************/
/* */
/* <Section> */
/* outline_processing */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Outline */
/* */
/* <Description> */
/* This structure is used to describe an outline to the scan-line */
/* converter. */
/* */
/* <Fields> */
/* n_contours :: The number of contours in the outline. */
/* */
/* n_points :: The number of points in the outline. */
/* */
/* points :: A pointer to an array of `n_points' @FT_Vector */
/* elements, giving the outline's point coordinates. */
/* */
/* tags :: A pointer to an array of `n_points' chars, giving */
/* each outline point's type. */
/* */
/* If bit~0 is unset, the point is `off' the curve, */
/* i.e., a Bézier control point, while it is `on' if */
/* set. */
/* */
/* Bit~1 is meaningful for `off' points only. If set, */
/* it indicates a third-order Bézier arc control point; */
/* and a second-order control point if unset. */
/* */
/* If bit~2 is set, bits 5-7 contain the drop-out mode */
/* (as defined in the OpenType specification; the value */
/* is the same as the argument to the SCANMODE */
/* instruction). */
/* */
/* Bits 3 and~4 are reserved for internal purposes. */
/* */
/* contours :: An array of `n_contours' shorts, giving the end */
/* point of each contour within the outline. For */
/* example, the first contour is defined by the points */
/* `0' to `contours[0]', the second one is defined by */
/* the points `contours[0]+1' to `contours[1]', etc. */
/* */
/* flags :: A set of bit flags used to characterize the outline */
/* and give hints to the scan-converter and hinter on */
/* how to convert/grid-fit it. See @FT_OUTLINE_FLAGS. */
/* */
/* <Note> */
/* The B/W rasterizer only checks bit~2 in the `tags' array for the */
/* first point of each contour. The drop-out mode as given with */
/* @FT_OUTLINE_IGNORE_DROPOUTS, @FT_OUTLINE_SMART_DROPOUTS, and */
/* @FT_OUTLINE_INCLUDE_STUBS in `flags' is then overridden. */
/* */
typedef struct FT_Outline_
{
/* number of contours in glyph */
short n_contours;
/* number of points in the glyph */
short n_points;
/* the outline's points */
FT_Vector* points;
/* the points flags */
char* tags;
/* the contour end points */
short* contours;
/* outline masks */
int flags;
} FT_Outline;
/* Following limits must be consistent with */
/* FT_Outline.{n_contours,n_points} */
#define FT_OUTLINE_CONTOURS_MAX SHRT_MAX
#define FT_OUTLINE_POINTS_MAX SHRT_MAX
/*************************************************************************/
/* */
/* <Enum> */
/* FT_OUTLINE_FLAGS */
/* */
/* <Description> */
/* A list of bit-field constants use for the flags in an outline's */
/* `flags' field. */
/* */
/* <Values> */
/* FT_OUTLINE_NONE :: */
/* Value~0 is reserved. */
/* */
/* FT_OUTLINE_OWNER :: */
/* If set, this flag indicates that the outline's field arrays */
/* (i.e., `points', `flags', and `contours') are `owned' by the */
/* outline object, and should thus be freed when it is destroyed. */
/* */
/* FT_OUTLINE_EVEN_ODD_FILL :: */
/* By default, outlines are filled using the non-zero winding rule. */
/* If set to 1, the outline will be filled using the even-odd fill */
/* rule (only works with the smooth rasterizer). */
/* */
/* FT_OUTLINE_REVERSE_FILL :: */
/* By default, outside contours of an outline are oriented in */
/* clock-wise direction, as defined in the TrueType specification. */
/* This flag is set if the outline uses the opposite direction */
/* (typically for Type~1 fonts). This flag is ignored by the scan */
/* converter. */
/* */
/* FT_OUTLINE_IGNORE_DROPOUTS :: */
/* By default, the scan converter will try to detect drop-outs in */
/* an outline and correct the glyph bitmap to ensure consistent */
/* shape continuity. If set, this flag hints the scan-line */
/* converter to ignore such cases. See below for more information. */
/* */
/* FT_OUTLINE_SMART_DROPOUTS :: */
/* Select smart dropout control. If unset, use simple dropout */
/* control. Ignored if @FT_OUTLINE_IGNORE_DROPOUTS is set. See */
/* below for more information. */
/* */
/* FT_OUTLINE_INCLUDE_STUBS :: */
/* If set, turn pixels on for `stubs', otherwise exclude them. */
/* Ignored if @FT_OUTLINE_IGNORE_DROPOUTS is set. See below for */
/* more information. */
/* */
/* FT_OUTLINE_HIGH_PRECISION :: */
/* This flag indicates that the scan-line converter should try to */
/* convert this outline to bitmaps with the highest possible */
/* quality. It is typically set for small character sizes. Note */
/* that this is only a hint that might be completely ignored by a */
/* given scan-converter. */
/* */
/* FT_OUTLINE_SINGLE_PASS :: */
/* This flag is set to force a given scan-converter to only use a */
/* single pass over the outline to render a bitmap glyph image. */
/* Normally, it is set for very large character sizes. It is only */
/* a hint that might be completely ignored by a given */
/* scan-converter. */
/* */
/* <Note> */
/* The flags @FT_OUTLINE_IGNORE_DROPOUTS, @FT_OUTLINE_SMART_DROPOUTS, */
/* and @FT_OUTLINE_INCLUDE_STUBS are ignored by the smooth */
/* rasterizer. */
/* */
/* There exists a second mechanism to pass the drop-out mode to the */
/* B/W rasterizer; see the `tags' field in @FT_Outline. */
/* */
/* Please refer to the description of the `SCANTYPE' instruction in */
/* the OpenType specification (in file `ttinst1.doc') how simple */
/* drop-outs, smart drop-outs, and stubs are defined. */
/* */
#define FT_OUTLINE_NONE 0x0
#define FT_OUTLINE_OWNER 0x1
#define FT_OUTLINE_EVEN_ODD_FILL 0x2
#define FT_OUTLINE_REVERSE_FILL 0x4
#define FT_OUTLINE_IGNORE_DROPOUTS 0x8
#define FT_OUTLINE_SMART_DROPOUTS 0x10
#define FT_OUTLINE_INCLUDE_STUBS 0x20
#define FT_OUTLINE_HIGH_PRECISION 0x100
#define FT_OUTLINE_SINGLE_PASS 0x200
/*************************************************************************
*
* @enum:
* ft_outline_flags
*
* @description:
* These constants are deprecated. Please use the corresponding
* @FT_OUTLINE_FLAGS values.
*
* @values:
* ft_outline_none :: See @FT_OUTLINE_NONE.
* ft_outline_owner :: See @FT_OUTLINE_OWNER.
* ft_outline_even_odd_fill :: See @FT_OUTLINE_EVEN_ODD_FILL.
* ft_outline_reverse_fill :: See @FT_OUTLINE_REVERSE_FILL.
* ft_outline_ignore_dropouts :: See @FT_OUTLINE_IGNORE_DROPOUTS.
* ft_outline_high_precision :: See @FT_OUTLINE_HIGH_PRECISION.
* ft_outline_single_pass :: See @FT_OUTLINE_SINGLE_PASS.
*/
#define ft_outline_none FT_OUTLINE_NONE
#define ft_outline_owner FT_OUTLINE_OWNER
#define ft_outline_even_odd_fill FT_OUTLINE_EVEN_ODD_FILL
#define ft_outline_reverse_fill FT_OUTLINE_REVERSE_FILL
#define ft_outline_ignore_dropouts FT_OUTLINE_IGNORE_DROPOUTS
#define ft_outline_high_precision FT_OUTLINE_HIGH_PRECISION
#define ft_outline_single_pass FT_OUTLINE_SINGLE_PASS
/* */
#define FT_CURVE_TAG( flag ) ( flag & 3 )
#define FT_CURVE_TAG_ON 1
#define FT_CURVE_TAG_CONIC 0
#define FT_CURVE_TAG_CUBIC 2
#define FT_CURVE_TAG_HAS_SCANMODE 4
/* reserved for the TrueType hinter */
#define FT_CURVE_TAG_TOUCH_X 8
/* reserved for the TrueType hinter */
#define FT_CURVE_TAG_TOUCH_Y 16
#define FT_CURVE_TAG_TOUCH_BOTH ( FT_CURVE_TAG_TOUCH_X | \
FT_CURVE_TAG_TOUCH_Y )
#define FT_Curve_Tag_On FT_CURVE_TAG_ON
#define FT_Curve_Tag_Conic FT_CURVE_TAG_CONIC
#define FT_Curve_Tag_Cubic FT_CURVE_TAG_CUBIC
#define FT_Curve_Tag_Touch_X FT_CURVE_TAG_TOUCH_X
#define FT_Curve_Tag_Touch_Y FT_CURVE_TAG_TOUCH_Y
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Outline_MoveToFunc */
/* */
/* <Description> */
/* A function pointer type used to describe the signature of a `move */
/* to' function during outline walking/decomposition. */
/* */
/* A `move to' is emitted to start a new contour in an outline. */
/* */
/* <Input> */
/* to :: A pointer to the target point of the `move to'. */
/* */
/* user :: A typeless pointer which is passed from the caller of the */
/* decomposition function. */
/* */
/* <Return> */
/* Error code. 0~means success. */
/* */
typedef int
(*FT_Outline_MoveToFunc)( const FT_Vector* to,
void* user );
#define FT_Outline_MoveTo_Func FT_Outline_MoveToFunc
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Outline_LineToFunc */
/* */
/* <Description> */
/* A function pointer type used to describe the signature of a `line */
/* to' function during outline walking/decomposition. */
/* */
/* A `line to' is emitted to indicate a segment in the outline. */
/* */
/* <Input> */
/* to :: A pointer to the target point of the `line to'. */
/* */
/* user :: A typeless pointer which is passed from the caller of the */
/* decomposition function. */
/* */
/* <Return> */
/* Error code. 0~means success. */
/* */
typedef int
(*FT_Outline_LineToFunc)( const FT_Vector* to,
void* user );
#define FT_Outline_LineTo_Func FT_Outline_LineToFunc
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Outline_ConicToFunc */
/* */
/* <Description> */
/* A function pointer type used to describe the signature of a `conic */
/* to' function during outline walking or decomposition. */
/* */
/* A `conic to' is emitted to indicate a second-order Bézier arc in */
/* the outline. */
/* */
/* <Input> */
/* control :: An intermediate control point between the last position */
/* and the new target in `to'. */
/* */
/* to :: A pointer to the target end point of the conic arc. */
/* */
/* user :: A typeless pointer which is passed from the caller of */
/* the decomposition function. */
/* */
/* <Return> */
/* Error code. 0~means success. */
/* */
typedef int
(*FT_Outline_ConicToFunc)( const FT_Vector* control,
const FT_Vector* to,
void* user );
#define FT_Outline_ConicTo_Func FT_Outline_ConicToFunc
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Outline_CubicToFunc */
/* */
/* <Description> */
/* A function pointer type used to describe the signature of a `cubic */
/* to' function during outline walking or decomposition. */
/* */
/* A `cubic to' is emitted to indicate a third-order Bézier arc. */
/* */
/* <Input> */
/* control1 :: A pointer to the first Bézier control point. */
/* */
/* control2 :: A pointer to the second Bézier control point. */
/* */
/* to :: A pointer to the target end point. */
/* */
/* user :: A typeless pointer which is passed from the caller of */
/* the decomposition function. */
/* */
/* <Return> */
/* Error code. 0~means success. */
/* */
typedef int
(*FT_Outline_CubicToFunc)( const FT_Vector* control1,
const FT_Vector* control2,
const FT_Vector* to,
void* user );
#define FT_Outline_CubicTo_Func FT_Outline_CubicToFunc
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Outline_Funcs */
/* */
/* <Description> */
/* A structure to hold various function pointers used during outline */
/* decomposition in order to emit segments, conic, and cubic Béziers. */
/* */
/* <Fields> */
/* move_to :: The `move to' emitter. */
/* */
/* line_to :: The segment emitter. */
/* */
/* conic_to :: The second-order Bézier arc emitter. */
/* */
/* cubic_to :: The third-order Bézier arc emitter. */
/* */
/* shift :: The shift that is applied to coordinates before they */
/* are sent to the emitter. */
/* */
/* delta :: The delta that is applied to coordinates before they */
/* are sent to the emitter, but after the shift. */
/* */
/* <Note> */
/* The point coordinates sent to the emitters are the transformed */
/* version of the original coordinates (this is important for high */
/* accuracy during scan-conversion). The transformation is simple: */
/* */
/* { */
/* x' = (x << shift) - delta */
/* y' = (x << shift) - delta */
/* } */
/* */
/* Set the values of `shift' and `delta' to~0 to get the original */
/* point coordinates. */
/* */
typedef struct FT_Outline_Funcs_
{
FT_Outline_MoveToFunc move_to;
FT_Outline_LineToFunc line_to;
FT_Outline_ConicToFunc conic_to;
FT_Outline_CubicToFunc cubic_to;
int shift;
FT_Pos delta;
} FT_Outline_Funcs;
/*************************************************************************/
/* */
/* <Section> */
/* basic_types */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Macro> */
/* FT_IMAGE_TAG */
/* */
/* <Description> */
/* This macro converts four-letter tags to an unsigned long type. */
/* */
/* <Note> */
/* Since many 16-bit compilers don't like 32-bit enumerations, you */
/* should redefine this macro in case of problems to something like */
/* this: */
/* */
/* { */
/* #define FT_IMAGE_TAG( value, _x1, _x2, _x3, _x4 ) value */
/* } */
/* */
/* to get a simple enumeration without assigning special numbers. */
/* */
#ifndef FT_IMAGE_TAG
#define FT_IMAGE_TAG( value, _x1, _x2, _x3, _x4 ) \
value = ( ( (unsigned long)_x1 << 24 ) | \
( (unsigned long)_x2 << 16 ) | \
( (unsigned long)_x3 << 8 ) | \
(unsigned long)_x4 )
/* FT_IMAGE_TAG */
#endif
/*************************************************************************/
/* */
/* <Enum> */
/* FT_Glyph_Format */
/* */
/* <Description> */
/* An enumeration type used to describe the format of a given glyph */
/* image. Note that this version of FreeType only supports two image */
/* formats, even though future font drivers will be able to register */
/* their own format. */
/* */
/* <Values> */
/* FT_GLYPH_FORMAT_NONE :: */
/* The value~0 is reserved. */
/* */
/* FT_GLYPH_FORMAT_COMPOSITE :: */
/* The glyph image is a composite of several other images. This */
/* format is _only_ used with @FT_LOAD_NO_RECURSE, and is used to */
/* report compound glyphs (like accented characters). */
/* */
/* FT_GLYPH_FORMAT_BITMAP :: */
/* The glyph image is a bitmap, and can be described as an */
/* @FT_Bitmap. You generally need to access the `bitmap' field of */
/* the @FT_GlyphSlotRec structure to read it. */
/* */
/* FT_GLYPH_FORMAT_OUTLINE :: */
/* The glyph image is a vectorial outline made of line segments */
/* and Bézier arcs; it can be described as an @FT_Outline; you */
/* generally want to access the `outline' field of the */
/* @FT_GlyphSlotRec structure to read it. */
/* */
/* FT_GLYPH_FORMAT_PLOTTER :: */
/* The glyph image is a vectorial path with no inside and outside */
/* contours. Some Type~1 fonts, like those in the Hershey family, */
/* contain glyphs in this format. These are described as */
/* @FT_Outline, but FreeType isn't currently capable of rendering */
/* them correctly. */
/* */
typedef enum FT_Glyph_Format_
{
FT_IMAGE_TAG( FT_GLYPH_FORMAT_NONE, 0, 0, 0, 0 ),
FT_IMAGE_TAG( FT_GLYPH_FORMAT_COMPOSITE, 'c', 'o', 'm', 'p' ),
FT_IMAGE_TAG( FT_GLYPH_FORMAT_BITMAP, 'b', 'i', 't', 's' ),
FT_IMAGE_TAG( FT_GLYPH_FORMAT_OUTLINE, 'o', 'u', 't', 'l' ),
FT_IMAGE_TAG( FT_GLYPH_FORMAT_PLOTTER, 'p', 'l', 'o', 't' )
} FT_Glyph_Format;
/*************************************************************************/
/* */
/* <Enum> */
/* ft_glyph_format_xxx */
/* */
/* <Description> */
/* A list of deprecated constants. Use the corresponding */
/* @FT_Glyph_Format values instead. */
/* */
/* <Values> */
/* ft_glyph_format_none :: See @FT_GLYPH_FORMAT_NONE. */
/* ft_glyph_format_composite :: See @FT_GLYPH_FORMAT_COMPOSITE. */
/* ft_glyph_format_bitmap :: See @FT_GLYPH_FORMAT_BITMAP. */
/* ft_glyph_format_outline :: See @FT_GLYPH_FORMAT_OUTLINE. */
/* ft_glyph_format_plotter :: See @FT_GLYPH_FORMAT_PLOTTER. */
/* */
#define ft_glyph_format_none FT_GLYPH_FORMAT_NONE
#define ft_glyph_format_composite FT_GLYPH_FORMAT_COMPOSITE
#define ft_glyph_format_bitmap FT_GLYPH_FORMAT_BITMAP
#define ft_glyph_format_outline FT_GLYPH_FORMAT_OUTLINE
#define ft_glyph_format_plotter FT_GLYPH_FORMAT_PLOTTER
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** R A S T E R D E F I N I T I O N S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* A raster is a scan converter, in charge of rendering an outline into */
/* a a bitmap. This section contains the public API for rasters. */
/* */
/* Note that in FreeType 2, all rasters are now encapsulated within */
/* specific modules called `renderers'. See `freetype/ftrender.h' for */
/* more details on renderers. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Section> */
/* raster */
/* */
/* <Title> */
/* Scanline Converter */
/* */
/* <Abstract> */
/* How vectorial outlines are converted into bitmaps and pixmaps. */
/* */
/* <Description> */
/* This section contains technical definitions. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Type> */
/* FT_Raster */
/* */
/* <Description> */
/* A handle (pointer) to a raster object. Each object can be used */
/* independently to convert an outline into a bitmap or pixmap. */
/* */
typedef struct FT_RasterRec_* FT_Raster;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Span */
/* */
/* <Description> */
/* A structure used to model a single span of gray (or black) pixels */
/* when rendering a monochrome or anti-aliased bitmap. */
/* */
/* <Fields> */
/* x :: The span's horizontal start position. */
/* */
/* len :: The span's length in pixels. */
/* */
/* coverage :: The span color/coverage, ranging from 0 (background) */
/* to 255 (foreground). Only used for anti-aliased */
/* rendering. */
/* */
/* <Note> */
/* This structure is used by the span drawing callback type named */
/* @FT_SpanFunc which takes the y~coordinate of the span as a */
/* a parameter. */
/* */
/* The coverage value is always between 0 and 255. If you want less */
/* gray values, the callback function has to reduce them. */
/* */
typedef struct FT_Span_
{
short x;
unsigned short len;
unsigned char coverage;
} FT_Span;
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_SpanFunc */
/* */
/* <Description> */
/* A function used as a call-back by the anti-aliased renderer in */
/* order to let client applications draw themselves the gray pixel */
/* spans on each scan line. */
/* */
/* <Input> */
/* y :: The scanline's y~coordinate. */
/* */
/* count :: The number of spans to draw on this scanline. */
/* */
/* spans :: A table of `count' spans to draw on the scanline. */
/* */
/* user :: User-supplied data that is passed to the callback. */
/* */
/* <Note> */
/* This callback allows client applications to directly render the */
/* gray spans of the anti-aliased bitmap to any kind of surfaces. */
/* */
/* This can be used to write anti-aliased outlines directly to a */
/* given background bitmap, and even perform translucency. */
/* */
/* Note that the `count' field cannot be greater than a fixed value */
/* defined by the `FT_MAX_GRAY_SPANS' configuration macro in */
/* `ftoption.h'. By default, this value is set to~32, which means */
/* that if there are more than 32~spans on a given scanline, the */
/* callback is called several times with the same `y' parameter in */
/* order to draw all callbacks. */
/* */
/* Otherwise, the callback is only called once per scan-line, and */
/* only for those scanlines that do have `gray' pixels on them. */
/* */
typedef void
(*FT_SpanFunc)( int y,
int count,
const FT_Span* spans,
void* user );
#define FT_Raster_Span_Func FT_SpanFunc
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Raster_BitTest_Func */
/* */
/* <Description> */
/* THIS TYPE IS DEPRECATED. DO NOT USE IT. */
/* */
/* A function used as a call-back by the monochrome scan-converter */
/* to test whether a given target pixel is already set to the drawing */
/* `color'. These tests are crucial to implement drop-out control */
/* per-se the TrueType spec. */
/* */
/* <Input> */
/* y :: The pixel's y~coordinate. */
/* */
/* x :: The pixel's x~coordinate. */
/* */
/* user :: User-supplied data that is passed to the callback. */
/* */
/* <Return> */
/* 1~if the pixel is `set', 0~otherwise. */
/* */
typedef int
(*FT_Raster_BitTest_Func)( int y,
int x,
void* user );
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Raster_BitSet_Func */
/* */
/* <Description> */
/* THIS TYPE IS DEPRECATED. DO NOT USE IT. */
/* */
/* A function used as a call-back by the monochrome scan-converter */
/* to set an individual target pixel. This is crucial to implement */
/* drop-out control according to the TrueType specification. */
/* */
/* <Input> */
/* y :: The pixel's y~coordinate. */
/* */
/* x :: The pixel's x~coordinate. */
/* */
/* user :: User-supplied data that is passed to the callback. */
/* */
/* <Return> */
/* 1~if the pixel is `set', 0~otherwise. */
/* */
typedef void
(*FT_Raster_BitSet_Func)( int y,
int x,
void* user );
/*************************************************************************/
/* */
/* <Enum> */
/* FT_RASTER_FLAG_XXX */
/* */
/* <Description> */
/* A list of bit flag constants as used in the `flags' field of a */
/* @FT_Raster_Params structure. */
/* */
/* <Values> */
/* FT_RASTER_FLAG_DEFAULT :: This value is 0. */
/* */
/* FT_RASTER_FLAG_AA :: This flag is set to indicate that an */
/* anti-aliased glyph image should be */
/* generated. Otherwise, it will be */
/* monochrome (1-bit). */
/* */
/* FT_RASTER_FLAG_DIRECT :: This flag is set to indicate direct */
/* rendering. In this mode, client */
/* applications must provide their own span */
/* callback. This lets them directly */
/* draw or compose over an existing bitmap. */
/* If this bit is not set, the target */
/* pixmap's buffer _must_ be zeroed before */
/* rendering. */
/* */
/* Note that for now, direct rendering is */
/* only possible with anti-aliased glyphs. */
/* */
/* FT_RASTER_FLAG_CLIP :: This flag is only used in direct */
/* rendering mode. If set, the output will */
/* be clipped to a box specified in the */
/* `clip_box' field of the */
/* @FT_Raster_Params structure. */
/* */
/* Note that by default, the glyph bitmap */
/* is clipped to the target pixmap, except */
/* in direct rendering mode where all spans */
/* are generated if no clipping box is set. */
/* */
#define FT_RASTER_FLAG_DEFAULT 0x0
#define FT_RASTER_FLAG_AA 0x1
#define FT_RASTER_FLAG_DIRECT 0x2
#define FT_RASTER_FLAG_CLIP 0x4
/* deprecated */
#define ft_raster_flag_default FT_RASTER_FLAG_DEFAULT
#define ft_raster_flag_aa FT_RASTER_FLAG_AA
#define ft_raster_flag_direct FT_RASTER_FLAG_DIRECT
#define ft_raster_flag_clip FT_RASTER_FLAG_CLIP
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Raster_Params */
/* */
/* <Description> */
/* A structure to hold the arguments used by a raster's render */
/* function. */
/* */
/* <Fields> */
/* target :: The target bitmap. */
/* */
/* source :: A pointer to the source glyph image (e.g., an */
/* @FT_Outline). */
/* */
/* flags :: The rendering flags. */
/* */
/* gray_spans :: The gray span drawing callback. */
/* */
/* black_spans :: The black span drawing callback. UNIMPLEMENTED! */
/* */
/* bit_test :: The bit test callback. UNIMPLEMENTED! */
/* */
/* bit_set :: The bit set callback. UNIMPLEMENTED! */
/* */
/* user :: User-supplied data that is passed to each drawing */
/* callback. */
/* */
/* clip_box :: An optional clipping box. It is only used in */
/* direct rendering mode. Note that coordinates here */
/* should be expressed in _integer_ pixels (and not in */
/* 26.6 fixed-point units). */
/* */
/* <Note> */
/* An anti-aliased glyph bitmap is drawn if the @FT_RASTER_FLAG_AA */
/* bit flag is set in the `flags' field, otherwise a monochrome */
/* bitmap is generated. */
/* */
/* If the @FT_RASTER_FLAG_DIRECT bit flag is set in `flags', the */
/* raster will call the `gray_spans' callback to draw gray pixel */
/* spans, in the case of an aa glyph bitmap, it will call */
/* `black_spans', and `bit_test' and `bit_set' in the case of a */
/* monochrome bitmap. This allows direct composition over a */
/* pre-existing bitmap through user-provided callbacks to perform the */
/* span drawing/composition. */
/* */
/* Note that the `bit_test' and `bit_set' callbacks are required when */
/* rendering a monochrome bitmap, as they are crucial to implement */
/* correct drop-out control as defined in the TrueType specification. */
/* */
typedef struct FT_Raster_Params_
{
const FT_Bitmap* target;
const void* source;
int flags;
FT_SpanFunc gray_spans;
/* doesn't work! */
FT_SpanFunc black_spans;
/* doesn't work! */
FT_Raster_BitTest_Func bit_test;
/* doesn't work! */
FT_Raster_BitSet_Func bit_set;
void* user;
FT_BBox clip_box;
} FT_Raster_Params;
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Raster_NewFunc */
/* */
/* <Description> */
/* A function used to create a new raster object. */
/* */
/* <Input> */
/* memory :: A handle to the memory allocator. */
/* */
/* <Output> */
/* raster :: A handle to the new raster object. */
/* */
/* <Return> */
/* Error code. 0~means success. */
/* */
/* <Note> */
/* The `memory' parameter is a typeless pointer in order to avoid */
/* un-wanted dependencies on the rest of the FreeType code. In */
/* practice, it is an @FT_Memory object, i.e., a handle to the */
/* standard FreeType memory allocator. However, this field can be */
/* completely ignored by a given raster implementation. */
/* */
typedef int
(*FT_Raster_NewFunc)( void* memory,
FT_Raster* raster );
#define FT_Raster_New_Func FT_Raster_NewFunc
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Raster_DoneFunc */
/* */
/* <Description> */
/* A function used to destroy a given raster object. */
/* */
/* <Input> */
/* raster :: A handle to the raster object. */
/* */
typedef void
(*FT_Raster_DoneFunc)( FT_Raster raster );
#define FT_Raster_Done_Func FT_Raster_DoneFunc
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Raster_ResetFunc */
/* */
/* <Description> */
/* FreeType provides an area of memory called the `render pool', */
/* available to all registered rasters. This pool can be freely used */
/* during a given scan-conversion but is shared by all rasters. Its */
/* content is thus transient. */
/* */
/* This function is called each time the render pool changes, or just */
/* after a new raster object is created. */
/* */
/* <Input> */
/* raster :: A handle to the new raster object. */
/* */
/* pool_base :: The address in memory of the render pool. */
/* */
/* pool_size :: The size in bytes of the render pool. */
/* */
/* <Note> */
/* Rasters can ignore the render pool and rely on dynamic memory */
/* allocation if they want to (a handle to the memory allocator is */
/* passed to the raster constructor). However, this is not */
/* recommended for efficiency purposes. */
/* */
typedef void
(*FT_Raster_ResetFunc)( FT_Raster raster,
unsigned char* pool_base,
unsigned long pool_size );
#define FT_Raster_Reset_Func FT_Raster_ResetFunc
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Raster_SetModeFunc */
/* */
/* <Description> */
/* This function is a generic facility to change modes or attributes */
/* in a given raster. This can be used for debugging purposes, or */
/* simply to allow implementation-specific `features' in a given */
/* raster module. */
/* */
/* <Input> */
/* raster :: A handle to the new raster object. */
/* */
/* mode :: A 4-byte tag used to name the mode or property. */
/* */
/* args :: A pointer to the new mode/property to use. */
/* */
typedef int
(*FT_Raster_SetModeFunc)( FT_Raster raster,
unsigned long mode,
void* args );
#define FT_Raster_Set_Mode_Func FT_Raster_SetModeFunc
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Raster_RenderFunc */
/* */
/* <Description> */
/* Invoke a given raster to scan-convert a given glyph image into a */
/* target bitmap. */
/* */
/* <Input> */
/* raster :: A handle to the raster object. */
/* */
/* params :: A pointer to an @FT_Raster_Params structure used to */
/* store the rendering parameters. */
/* */
/* <Return> */
/* Error code. 0~means success. */
/* */
/* <Note> */
/* The exact format of the source image depends on the raster's glyph */
/* format defined in its @FT_Raster_Funcs structure. It can be an */
/* @FT_Outline or anything else in order to support a large array of */
/* glyph formats. */
/* */
/* Note also that the render function can fail and return a */
/* `FT_Err_Unimplemented_Feature' error code if the raster used does */
/* not support direct composition. */
/* */
/* XXX: For now, the standard raster doesn't support direct */
/* composition but this should change for the final release (see */
/* the files `demos/src/ftgrays.c' and `demos/src/ftgrays2.c' */
/* for examples of distinct implementations which support direct */
/* composition). */
/* */
typedef int
(*FT_Raster_RenderFunc)( FT_Raster raster,
const FT_Raster_Params* params );
#define FT_Raster_Render_Func FT_Raster_RenderFunc
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Raster_Funcs */
/* */
/* <Description> */
/* A structure used to describe a given raster class to the library. */
/* */
/* <Fields> */
/* glyph_format :: The supported glyph format for this raster. */
/* */
/* raster_new :: The raster constructor. */
/* */
/* raster_reset :: Used to reset the render pool within the raster. */
/* */
/* raster_render :: A function to render a glyph into a given bitmap. */
/* */
/* raster_done :: The raster destructor. */
/* */
typedef struct FT_Raster_Funcs_
{
FT_Glyph_Format glyph_format;
FT_Raster_NewFunc raster_new;
FT_Raster_ResetFunc raster_reset;
FT_Raster_SetModeFunc raster_set_mode;
FT_Raster_RenderFunc raster_render;
FT_Raster_DoneFunc raster_done;
} FT_Raster_Funcs;
/* */
FT_END_HEADER
/* END */
/* Local Variables: */
/* coding: utf-8 */
/* End: */
#include <stddef.h>
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* basic_types */
/* */
/* <Title> */
/* Basic Data Types */
/* */
/* <Abstract> */
/* The basic data types defined by the library. */
/* */
/* <Description> */
/* This section contains the basic data types defined by FreeType~2, */
/* ranging from simple scalar types to bitmap descriptors. More */
/* font-specific structures are defined in a different section. */
/* */
/* <Order> */
/* FT_Byte */
/* FT_Bytes */
/* FT_Char */
/* FT_Int */
/* FT_UInt */
/* FT_Int16 */
/* FT_UInt16 */
/* FT_Int32 */
/* FT_UInt32 */
/* FT_Short */
/* FT_UShort */
/* FT_Long */
/* FT_ULong */
/* FT_Bool */
/* FT_Offset */
/* FT_PtrDist */
/* FT_String */
/* FT_Tag */
/* FT_Error */
/* FT_Fixed */
/* FT_Pointer */
/* FT_Pos */
/* FT_Vector */
/* FT_BBox */
/* FT_Matrix */
/* FT_FWord */
/* FT_UFWord */
/* FT_F2Dot14 */
/* FT_UnitVector */
/* FT_F26Dot6 */
/* */
/* */
/* FT_Generic */
/* FT_Generic_Finalizer */
/* */
/* FT_Bitmap */
/* FT_Pixel_Mode */
/* FT_Palette_Mode */
/* FT_Glyph_Format */
/* FT_IMAGE_TAG */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Type> */
/* FT_Bool */
/* */
/* <Description> */
/* A typedef of unsigned char, used for simple booleans. As usual, */
/* values 1 and~0 represent true and false, respectively. */
/* */
typedef unsigned char FT_Bool;
/*************************************************************************/
/* */
/* <Type> */
/* FT_FWord */
/* */
/* <Description> */
/* A signed 16-bit integer used to store a distance in original font */
/* units. */
/* */
/* distance in FUnits */
typedef signed short FT_FWord;
/*************************************************************************/
/* */
/* <Type> */
/* FT_UFWord */
/* */
/* <Description> */
/* An unsigned 16-bit integer used to store a distance in original */
/* font units. */
/* */
/* unsigned distance */
typedef unsigned short FT_UFWord;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Char */
/* */
/* <Description> */
/* A simple typedef for the _signed_ char type. */
/* */
typedef signed char FT_Char;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Byte */
/* */
/* <Description> */
/* A simple typedef for the _unsigned_ char type. */
/* */
typedef unsigned char FT_Byte;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Bytes */
/* */
/* <Description> */
/* A typedef for constant memory areas. */
/* */
typedef const FT_Byte* FT_Bytes;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Tag */
/* */
/* <Description> */
/* A typedef for 32-bit tags (as used in the SFNT format). */
/* */
typedef FT_UInt32 FT_Tag;
/*************************************************************************/
/* */
/* <Type> */
/* FT_String */
/* */
/* <Description> */
/* A simple typedef for the char type, usually used for strings. */
/* */
typedef char FT_String;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Short */
/* */
/* <Description> */
/* A typedef for signed short. */
/* */
typedef signed short FT_Short;
/*************************************************************************/
/* */
/* <Type> */
/* FT_UShort */
/* */
/* <Description> */
/* A typedef for unsigned short. */
/* */
typedef unsigned short FT_UShort;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Int */
/* */
/* <Description> */
/* A typedef for the int type. */
/* */
typedef signed int FT_Int;
/*************************************************************************/
/* */
/* <Type> */
/* FT_UInt */
/* */
/* <Description> */
/* A typedef for the unsigned int type. */
/* */
typedef unsigned int FT_UInt;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Long */
/* */
/* <Description> */
/* A typedef for signed long. */
/* */
typedef signed long FT_Long;
/*************************************************************************/
/* */
/* <Type> */
/* FT_ULong */
/* */
/* <Description> */
/* A typedef for unsigned long. */
/* */
typedef unsigned long FT_ULong;
/*************************************************************************/
/* */
/* <Type> */
/* FT_F2Dot14 */
/* */
/* <Description> */
/* A signed 2.14 fixed float type used for unit vectors. */
/* */
typedef signed short FT_F2Dot14;
/*************************************************************************/
/* */
/* <Type> */
/* FT_F26Dot6 */
/* */
/* <Description> */
/* A signed 26.6 fixed float type used for vectorial pixel */
/* coordinates. */
/* */
typedef signed long FT_F26Dot6;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Fixed */
/* */
/* <Description> */
/* This type is used to store 16.16 fixed float values, like scaling */
/* values or matrix coefficients. */
/* */
typedef signed long FT_Fixed;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Error */
/* */
/* <Description> */
/* The FreeType error code type. A value of~0 is always interpreted */
/* as a successful operation. */
/* */
typedef int FT_Error;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Pointer */
/* */
/* <Description> */
/* A simple typedef for a typeless pointer. */
/* */
typedef void* FT_Pointer;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Offset */
/* */
/* <Description> */
/* This is equivalent to the ANSI~C `size_t' type, i.e., the largest */
/* _unsigned_ integer type used to express a file size or position, */
/* or a memory block size. */
/* */
typedef size_t FT_Offset;
/*************************************************************************/
/* */
/* <Type> */
/* FT_PtrDist */
/* */
/* <Description> */
/* This is equivalent to the ANSI~C `ptrdiff_t' type, i.e., the */
/* largest _signed_ integer type used to express the distance */
/* between two pointers. */
/* */
typedef ft_ptrdiff_t FT_PtrDist;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_UnitVector */
/* */
/* <Description> */
/* A simple structure used to store a 2D vector unit vector. Uses */
/* FT_F2Dot14 types. */
/* */
/* <Fields> */
/* x :: Horizontal coordinate. */
/* */
/* y :: Vertical coordinate. */
/* */
typedef struct FT_UnitVector_
{
FT_F2Dot14 x;
FT_F2Dot14 y;
} FT_UnitVector;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Matrix */
/* */
/* <Description> */
/* A simple structure used to store a 2x2 matrix. Coefficients are */
/* in 16.16 fixed float format. The computation performed is: */
/* */
/* { */
/* x' = x*xx + y*xy */
/* y' = x*yx + y*yy */
/* } */
/* */
/* <Fields> */
/* xx :: Matrix coefficient. */
/* */
/* xy :: Matrix coefficient. */
/* */
/* yx :: Matrix coefficient. */
/* */
/* yy :: Matrix coefficient. */
/* */
typedef struct FT_Matrix_
{
FT_Fixed xx, xy;
FT_Fixed yx, yy;
} FT_Matrix;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Data */
/* */
/* <Description> */
/* Read-only binary data represented as a pointer and a length. */
/* */
/* <Fields> */
/* pointer :: The data. */
/* */
/* length :: The length of the data in bytes. */
/* */
typedef struct FT_Data_
{
const FT_Byte* pointer;
FT_Int length;
} FT_Data;
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Generic_Finalizer */
/* */
/* <Description> */
/* Describe a function used to destroy the `client' data of any */
/* FreeType object. See the description of the @FT_Generic type for */
/* details of usage. */
/* */
/* <Input> */
/* The address of the FreeType object which is under finalization. */
/* Its client data is accessed through its `generic' field. */
/* */
typedef void (*FT_Generic_Finalizer)(void* object);
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Generic */
/* */
/* <Description> */
/* Client applications often need to associate their own data to a */
/* variety of FreeType core objects. For example, a text layout API */
/* might want to associate a glyph cache to a given size object. */
/* */
/* Some FreeType object contains a `generic' field, of type */
/* FT_Generic, which usage is left to client applications and font */
/* servers. */
/* */
/* It can be used to store a pointer to client-specific data, as well */
/* as the address of a `finalizer' function, which will be called by */
/* FreeType when the object is destroyed (for example, the previous */
/* client example would put the address of the glyph cache destructor */
/* in the `finalizer' field). */
/* */
/* <Fields> */
/* data :: A typeless pointer to any client-specified data. This */
/* field is completely ignored by the FreeType library. */
/* */
/* finalizer :: A pointer to a `generic finalizer' function, which */
/* will be called when the object is destroyed. If this */
/* field is set to NULL, no code will be called. */
/* */
typedef struct FT_Generic_
{
void* data;
FT_Generic_Finalizer finalizer;
} FT_Generic;
/*************************************************************************/
/* */
/* <Macro> */
/* FT_MAKE_TAG */
/* */
/* <Description> */
/* This macro converts four-letter tags which are used to label */
/* TrueType tables into an unsigned long to be used within FreeType. */
/* */
/* <Note> */
/* The produced values *must* be 32-bit integers. Don't redefine */
/* this macro. */
/* */
#define FT_MAKE_TAG( _x1, _x2, _x3, _x4 ) \
(FT_Tag) \
( ( (FT_ULong)_x1 << 24 ) | \
( (FT_ULong)_x2 << 16 ) | \
( (FT_ULong)_x3 << 8 ) | \
(FT_ULong)_x4 )
/*************************************************************************/
/*************************************************************************/
/* */
/* L I S T M A N A G E M E N T */
/* */
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Section> */
/* list_processing */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Type> */
/* FT_ListNode */
/* */
/* <Description> */
/* Many elements and objects in FreeType are listed through an */
/* @FT_List record (see @FT_ListRec). As its name suggests, an */
/* FT_ListNode is a handle to a single list element. */
/* */
typedef struct FT_ListNodeRec_* FT_ListNode;
/*************************************************************************/
/* */
/* <Type> */
/* FT_List */
/* */
/* <Description> */
/* A handle to a list record (see @FT_ListRec). */
/* */
typedef struct FT_ListRec_* FT_List;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_ListNodeRec */
/* */
/* <Description> */
/* A structure used to hold a single list element. */
/* */
/* <Fields> */
/* prev :: The previous element in the list. NULL if first. */
/* */
/* next :: The next element in the list. NULL if last. */
/* */
/* data :: A typeless pointer to the listed object. */
/* */
typedef struct FT_ListNodeRec_
{
FT_ListNode prev;
FT_ListNode next;
void* data;
} FT_ListNodeRec;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_ListRec */
/* */
/* <Description> */
/* A structure used to hold a simple doubly-linked list. These are */
/* used in many parts of FreeType. */
/* */
/* <Fields> */
/* head :: The head (first element) of doubly-linked list. */
/* */
/* tail :: The tail (last element) of doubly-linked list. */
/* */
typedef struct FT_ListRec_
{
FT_ListNode head;
FT_ListNode tail;
} FT_ListRec;
/* */
#define FT_IS_EMPTY( list ) ( (list).head == 0 )
/* return base error code (without module-specific prefix) */
#define FT_ERROR_BASE( x ) ( (x) & 0xFF )
/* return module error code */
#define FT_ERROR_MODULE( x ) ( (x) & 0xFF00U )
#define FT_BOOL( x ) ( (FT_Bool)( x ) )
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* user_allocation */
/* */
/* <Title> */
/* User allocation */
/* */
/* <Abstract> */
/* How client applications should allocate FreeType data structures. */
/* */
/* <Description> */
/* FreeType assumes that structures allocated by the user and passed */
/* as arguments are zeroed out except for the actual data. In other */
/* words, it is recommended to use `calloc' (or variants of it) */
/* instead of `malloc' for allocation. */
/* */
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* B A S I C T Y P E S */
/* */
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Section> */
/* base_interface */
/* */
/* <Title> */
/* Base Interface */
/* */
/* <Abstract> */
/* The FreeType~2 base font interface. */
/* */
/* <Description> */
/* This section describes the public high-level API of FreeType~2. */
/* */
/* <Order> */
/* FT_Library */
/* FT_Face */
/* FT_Size */
/* FT_GlyphSlot */
/* FT_CharMap */
/* FT_Encoding */
/* */
/* FT_FaceRec */
/* */
/* FT_FACE_FLAG_SCALABLE */
/* FT_FACE_FLAG_FIXED_SIZES */
/* FT_FACE_FLAG_FIXED_WIDTH */
/* FT_FACE_FLAG_HORIZONTAL */
/* FT_FACE_FLAG_VERTICAL */
/* FT_FACE_FLAG_SFNT */
/* FT_FACE_FLAG_KERNING */
/* FT_FACE_FLAG_MULTIPLE_MASTERS */
/* FT_FACE_FLAG_GLYPH_NAMES */
/* FT_FACE_FLAG_EXTERNAL_STREAM */
/* FT_FACE_FLAG_FAST_GLYPHS */
/* FT_FACE_FLAG_HINTER */
/* */
/* FT_STYLE_FLAG_BOLD */
/* FT_STYLE_FLAG_ITALIC */
/* */
/* FT_SizeRec */
/* FT_Size_Metrics */
/* */
/* FT_GlyphSlotRec */
/* FT_Glyph_Metrics */
/* FT_SubGlyph */
/* */
/* FT_Bitmap_Size */
/* */
/* FT_Init_FreeType */
/* FT_Done_FreeType */
/* */
/* FT_New_Face */
/* FT_Done_Face */
/* FT_New_Memory_Face */
/* FT_Open_Face */
/* FT_Open_Args */
/* FT_Parameter */
/* FT_Attach_File */
/* FT_Attach_Stream */
/* */
/* FT_Set_Char_Size */
/* FT_Set_Pixel_Sizes */
/* FT_Request_Size */
/* FT_Select_Size */
/* FT_Size_Request_Type */
/* FT_Size_Request */
/* FT_Set_Transform */
/* FT_Load_Glyph */
/* FT_Get_Char_Index */
/* FT_Get_Name_Index */
/* FT_Load_Char */
/* */
/* FT_OPEN_MEMORY */
/* FT_OPEN_STREAM */
/* FT_OPEN_PATHNAME */
/* FT_OPEN_DRIVER */
/* FT_OPEN_PARAMS */
/* */
/* FT_LOAD_DEFAULT */
/* FT_LOAD_RENDER */
/* FT_LOAD_MONOCHROME */
/* FT_LOAD_LINEAR_DESIGN */
/* FT_LOAD_NO_SCALE */
/* FT_LOAD_NO_HINTING */
/* FT_LOAD_NO_BITMAP */
/* FT_LOAD_CROP_BITMAP */
/* */
/* FT_LOAD_VERTICAL_LAYOUT */
/* FT_LOAD_IGNORE_TRANSFORM */
/* FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH */
/* FT_LOAD_FORCE_AUTOHINT */
/* FT_LOAD_NO_RECURSE */
/* FT_LOAD_PEDANTIC */
/* */
/* FT_LOAD_TARGET_NORMAL */
/* FT_LOAD_TARGET_LIGHT */
/* FT_LOAD_TARGET_MONO */
/* FT_LOAD_TARGET_LCD */
/* FT_LOAD_TARGET_LCD_V */
/* */
/* FT_Render_Glyph */
/* FT_Render_Mode */
/* FT_Get_Kerning */
/* FT_Kerning_Mode */
/* FT_Get_Track_Kerning */
/* FT_Get_Glyph_Name */
/* FT_Get_Postscript_Name */
/* */
/* FT_CharMapRec */
/* FT_Select_Charmap */
/* FT_Set_Charmap */
/* FT_Get_Charmap_Index */
/* */
/* FT_FSTYPE_INSTALLABLE_EMBEDDING */
/* FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING */
/* FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING */
/* FT_FSTYPE_EDITABLE_EMBEDDING */
/* FT_FSTYPE_NO_SUBSETTING */
/* FT_FSTYPE_BITMAP_EMBEDDING_ONLY */
/* */
/* FT_Get_FSType_Flags */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Glyph_Metrics */
/* */
/* <Description> */
/* A structure used to model the metrics of a single glyph. The */
/* values are expressed in 26.6 fractional pixel format; if the flag */
/* @FT_LOAD_NO_SCALE has been used while loading the glyph, values */
/* are expressed in font units instead. */
/* */
/* <Fields> */
/* width :: */
/* The glyph's width. */
/* */
/* height :: */
/* The glyph's height. */
/* */
/* horiBearingX :: */
/* Left side bearing for horizontal layout. */
/* */
/* horiBearingY :: */
/* Top side bearing for horizontal layout. */
/* */
/* horiAdvance :: */
/* Advance width for horizontal layout. */
/* */
/* vertBearingX :: */
/* Left side bearing for vertical layout. */
/* */
/* vertBearingY :: */
/* Top side bearing for vertical layout. Larger positive values */
/* mean further below the vertical glyph origin. */
/* */
/* vertAdvance :: */
/* Advance height for vertical layout. Positive values mean the */
/* glyph has a positive advance downward. */
/* */
/* <Note> */
/* If not disabled with @FT_LOAD_NO_HINTING, the values represent */
/* dimensions of the hinted glyph (in case hinting is applicable). */
/* */
/* Stroking a glyph with an outside border does not increase */
/* `horiAdvance' or `vertAdvance'; you have to manually adjust these */
/* values to account for the added width and height. */
/* */
typedef struct FT_Glyph_Metrics_
{
FT_Pos width;
FT_Pos height;
FT_Pos horiBearingX;
FT_Pos horiBearingY;
FT_Pos horiAdvance;
FT_Pos vertBearingX;
FT_Pos vertBearingY;
FT_Pos vertAdvance;
} FT_Glyph_Metrics;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Bitmap_Size */
/* */
/* <Description> */
/* This structure models the metrics of a bitmap strike (i.e., a set */
/* of glyphs for a given point size and resolution) in a bitmap font. */
/* It is used for the `available_sizes' field of @FT_Face. */
/* */
/* <Fields> */
/* height :: The vertical distance, in pixels, between two */
/* consecutive baselines. It is always positive. */
/* */
/* width :: The average width, in pixels, of all glyphs in the */
/* strike. */
/* */
/* size :: The nominal size of the strike in 26.6 fractional */
/* points. This field is not very useful. */
/* */
/* x_ppem :: The horizontal ppem (nominal width) in 26.6 fractional */
/* pixels. */
/* */
/* y_ppem :: The vertical ppem (nominal height) in 26.6 fractional */
/* pixels. */
/* */
/* <Note> */
/* Windows FNT: */
/* The nominal size given in a FNT font is not reliable. Thus when */
/* the driver finds it incorrect, it sets `size' to some calculated */
/* values and sets `x_ppem' and `y_ppem' to the pixel width and */
/* height given in the font, respectively. */
/* */
/* TrueType embedded bitmaps: */
/* `size', `width', and `height' values are not contained in the */
/* bitmap strike itself. They are computed from the global font */
/* parameters. */
/* */
typedef struct FT_Bitmap_Size_
{
FT_Short height;
FT_Short width;
FT_Pos size;
FT_Pos x_ppem;
FT_Pos y_ppem;
} FT_Bitmap_Size;
/*************************************************************************/
/*************************************************************************/
/* */
/* O B J E C T C L A S S E S */
/* */
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Type> */
/* FT_Library */
/* */
/* <Description> */
/* A handle to a FreeType library instance. Each `library' is */
/* completely independent from the others; it is the `root' of a set */
/* of objects like fonts, faces, sizes, etc. */
/* */
/* It also embeds a memory manager (see @FT_Memory), as well as a */
/* scan-line converter object (see @FT_Raster). */
/* */
/* For multi-threading applications each thread should have its own */
/* FT_Library object. */
/* */
/* <Note> */
/* Library objects are normally created by @FT_Init_FreeType, and */
/* destroyed with @FT_Done_FreeType. */
/* */
typedef struct FT_LibraryRec_ *FT_Library;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Module */
/* */
/* <Description> */
/* A handle to a given FreeType module object. Each module can be a */
/* font driver, a renderer, or anything else that provides services */
/* to the formers. */
/* */
typedef struct FT_ModuleRec_* FT_Module;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Driver */
/* */
/* <Description> */
/* A handle to a given FreeType font driver object. Each font driver */
/* is a special module capable of creating faces from font files. */
/* */
typedef struct FT_DriverRec_* FT_Driver;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Renderer */
/* */
/* <Description> */
/* A handle to a given FreeType renderer. A renderer is a special */
/* module in charge of converting a glyph image to a bitmap, when */
/* necessary. Each renderer supports a given glyph image format, and */
/* one or more target surface depths. */
/* */
typedef struct FT_RendererRec_* FT_Renderer;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Face */
/* */
/* <Description> */
/* A handle to a given typographic face object. A face object models */
/* a given typeface, in a given style. */
/* */
/* <Note> */
/* Each face object also owns a single @FT_GlyphSlot object, as well */
/* as one or more @FT_Size objects. */
/* */
/* Use @FT_New_Face or @FT_Open_Face to create a new face object from */
/* a given filepathname or a custom input stream. */
/* */
/* Use @FT_Done_Face to destroy it (along with its slot and sizes). */
/* */
/* <Also> */
/* See @FT_FaceRec for the publicly accessible fields of a given face */
/* object. */
/* */
typedef struct FT_FaceRec_* FT_Face;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Size */
/* */
/* <Description> */
/* A handle to an object used to model a face scaled to a given */
/* character size. */
/* */
/* <Note> */
/* Each @FT_Face has an _active_ @FT_Size object that is used by */
/* functions like @FT_Load_Glyph to determine the scaling */
/* transformation which is used to load and hint glyphs and metrics. */
/* */
/* You can use @FT_Set_Char_Size, @FT_Set_Pixel_Sizes, */
/* @FT_Request_Size or even @FT_Select_Size to change the content */
/* (i.e., the scaling values) of the active @FT_Size. */
/* */
/* You can use @FT_New_Size to create additional size objects for a */
/* given @FT_Face, but they won't be used by other functions until */
/* you activate it through @FT_Activate_Size. Only one size can be */
/* activated at any given time per face. */
/* */
/* <Also> */
/* See @FT_SizeRec for the publicly accessible fields of a given size */
/* object. */
/* */
typedef struct FT_SizeRec_* FT_Size;
/*************************************************************************/
/* */
/* <Type> */
/* FT_GlyphSlot */
/* */
/* <Description> */
/* A handle to a given `glyph slot'. A slot is a container where it */
/* is possible to load any of the glyphs contained in its parent */
/* face. */
/* */
/* In other words, each time you call @FT_Load_Glyph or */
/* @FT_Load_Char, the slot's content is erased by the new glyph data, */
/* i.e., the glyph's metrics, its image (bitmap or outline), and */
/* other control information. */
/* */
/* <Also> */
/* See @FT_GlyphSlotRec for the publicly accessible glyph fields. */
/* */
typedef struct FT_GlyphSlotRec_* FT_GlyphSlot;
/*************************************************************************/
/* */
/* <Type> */
/* FT_CharMap */
/* */
/* <Description> */
/* A handle to a given character map. A charmap is used to translate */
/* character codes in a given encoding into glyph indexes for its */
/* parent's face. Some font formats may provide several charmaps per */
/* font. */
/* */
/* Each face object owns zero or more charmaps, but only one of them */
/* can be `active' and used by @FT_Get_Char_Index or @FT_Load_Char. */
/* */
/* The list of available charmaps in a face is available through the */
/* `face->num_charmaps' and `face->charmaps' fields of @FT_FaceRec. */
/* */
/* The currently active charmap is available as `face->charmap'. */
/* You should call @FT_Set_Charmap to change it. */
/* */
/* <Note> */
/* When a new face is created (either through @FT_New_Face or */
/* @FT_Open_Face), the library looks for a Unicode charmap within */
/* the list and automatically activates it. */
/* */
/* <Also> */
/* See @FT_CharMapRec for the publicly accessible fields of a given */
/* character map. */
/* */
typedef struct FT_CharMapRec_* FT_CharMap;
/*************************************************************************/
/* */
/* <Macro> */
/* FT_ENC_TAG */
/* */
/* <Description> */
/* This macro converts four-letter tags into an unsigned long. It is */
/* used to define `encoding' identifiers (see @FT_Encoding). */
/* */
/* <Note> */
/* Since many 16-bit compilers don't like 32-bit enumerations, you */
/* should redefine this macro in case of problems to something like */
/* this: */
/* */
/* { */
/* #define FT_ENC_TAG( value, a, b, c, d ) value */
/* } */
/* */
/* to get a simple enumeration without assigning special numbers. */
/* */
#ifndef FT_ENC_TAG
#define FT_ENC_TAG( value, a, b, c, d ) \
value = ( ( (FT_UInt32)(a) << 24 ) | \
( (FT_UInt32)(b) << 16 ) | \
( (FT_UInt32)(c) << 8 ) | \
(FT_UInt32)(d) )
/* FT_ENC_TAG */
#endif
/*************************************************************************/
/* */
/* <Enum> */
/* FT_Encoding */
/* */
/* <Description> */
/* An enumeration used to specify character sets supported by */
/* charmaps. Used in the @FT_Select_Charmap API function. */
/* */
/* <Note> */
/* Despite the name, this enumeration lists specific character */
/* repertories (i.e., charsets), and not text encoding methods (e.g., */
/* UTF-8, UTF-16, etc.). */
/* */
/* Other encodings might be defined in the future. */
/* */
/* <Values> */
/* FT_ENCODING_NONE :: */
/* The encoding value~0 is reserved. */
/* */
/* FT_ENCODING_UNICODE :: */
/* Corresponds to the Unicode character set. This value covers */
/* all versions of the Unicode repertoire, including ASCII and */
/* Latin-1. Most fonts include a Unicode charmap, but not all */
/* of them. */
/* */
/* For example, if you want to access Unicode value U+1F028 (and */
/* the font contains it), use value 0x1F028 as the input value for */
/* @FT_Get_Char_Index. */
/* */
/* FT_ENCODING_MS_SYMBOL :: */
/* Corresponds to the Microsoft Symbol encoding, used to encode */
/* mathematical symbols in the 32..255 character code range. For */
/* more information, see `http://www.ceviz.net/symbol.htm'. */
/* */
/* FT_ENCODING_SJIS :: */
/* Corresponds to Japanese SJIS encoding. More info at */
/* at `http://langsupport.japanreference.com/encoding.shtml'. */
/* See note on multi-byte encodings below. */
/* */
/* FT_ENCODING_GB2312 :: */
/* Corresponds to an encoding system for Simplified Chinese as used */
/* used in mainland China. */
/* */
/* FT_ENCODING_BIG5 :: */
/* Corresponds to an encoding system for Traditional Chinese as */
/* used in Taiwan and Hong Kong. */
/* */
/* FT_ENCODING_WANSUNG :: */
/* Corresponds to the Korean encoding system known as Wansung. */
/* For more information see */
/* `http://www.microsoft.com/typography/unicode/949.txt'. */
/* */
/* FT_ENCODING_JOHAB :: */
/* The Korean standard character set (KS~C 5601-1992), which */
/* corresponds to MS Windows code page 1361. This character set */
/* includes all possible Hangeul character combinations. */
/* */
/* FT_ENCODING_ADOBE_LATIN_1 :: */
/* Corresponds to a Latin-1 encoding as defined in a Type~1 */
/* PostScript font. It is limited to 256 character codes. */
/* */
/* FT_ENCODING_ADOBE_STANDARD :: */
/* Corresponds to the Adobe Standard encoding, as found in Type~1, */
/* CFF, and OpenType/CFF fonts. It is limited to 256 character */
/* codes. */
/* */
/* FT_ENCODING_ADOBE_EXPERT :: */
/* Corresponds to the Adobe Expert encoding, as found in Type~1, */
/* CFF, and OpenType/CFF fonts. It is limited to 256 character */
/* codes. */
/* */
/* FT_ENCODING_ADOBE_CUSTOM :: */
/* Corresponds to a custom encoding, as found in Type~1, CFF, and */
/* OpenType/CFF fonts. It is limited to 256 character codes. */
/* */
/* FT_ENCODING_APPLE_ROMAN :: */
/* Corresponds to the 8-bit Apple roman encoding. Many TrueType */
/* and OpenType fonts contain a charmap for this encoding, since */
/* older versions of Mac OS are able to use it. */
/* */
/* FT_ENCODING_OLD_LATIN_2 :: */
/* This value is deprecated and was never used nor reported by */
/* FreeType. Don't use or test for it. */
/* */
/* FT_ENCODING_MS_SJIS :: */
/* Same as FT_ENCODING_SJIS. Deprecated. */
/* */
/* FT_ENCODING_MS_GB2312 :: */
/* Same as FT_ENCODING_GB2312. Deprecated. */
/* */
/* FT_ENCODING_MS_BIG5 :: */
/* Same as FT_ENCODING_BIG5. Deprecated. */
/* */
/* FT_ENCODING_MS_WANSUNG :: */
/* Same as FT_ENCODING_WANSUNG. Deprecated. */
/* */
/* FT_ENCODING_MS_JOHAB :: */
/* Same as FT_ENCODING_JOHAB. Deprecated. */
/* */
/* <Note> */
/* By default, FreeType automatically synthesizes a Unicode charmap */
/* for PostScript fonts, using their glyph names dictionaries. */
/* However, it also reports the encodings defined explicitly in the */
/* font file, for the cases when they are needed, with the Adobe */
/* values as well. */
/* */
/* FT_ENCODING_NONE is set by the BDF and PCF drivers if the charmap */
/* is neither Unicode nor ISO-8859-1 (otherwise it is set to */
/* FT_ENCODING_UNICODE). Use @FT_Get_BDF_Charset_ID to find out */
/* which encoding is really present. If, for example, the */
/* `cs_registry' field is `KOI8' and the `cs_encoding' field is `R', */
/* the font is encoded in KOI8-R. */
/* */
/* FT_ENCODING_NONE is always set (with a single exception) by the */
/* winfonts driver. Use @FT_Get_WinFNT_Header and examine the */
/* `charset' field of the @FT_WinFNT_HeaderRec structure to find out */
/* which encoding is really present. For example, */
/* @FT_WinFNT_ID_CP1251 (204) means Windows code page 1251 (for */
/* Russian). */
/* */
/* FT_ENCODING_NONE is set if `platform_id' is @TT_PLATFORM_MACINTOSH */
/* and `encoding_id' is not @TT_MAC_ID_ROMAN (otherwise it is set to */
/* FT_ENCODING_APPLE_ROMAN). */
/* */
/* If `platform_id' is @TT_PLATFORM_MACINTOSH, use the function */
/* @FT_Get_CMap_Language_ID to query the Mac language ID which may */
/* be needed to be able to distinguish Apple encoding variants. See */
/* */
/* http://www.unicode.org/Public/MAPPINGS/VENDORS/APPLE/README.TXT */
/* */
/* to get an idea how to do that. Basically, if the language ID */
/* is~0, don't use it, otherwise subtract 1 from the language ID. */
/* Then examine `encoding_id'. If, for example, `encoding_id' is */
/* @TT_MAC_ID_ROMAN and the language ID (minus~1) is */
/* `TT_MAC_LANGID_GREEK', it is the Greek encoding, not Roman. */
/* @TT_MAC_ID_ARABIC with `TT_MAC_LANGID_FARSI' means the Farsi */
/* variant the Arabic encoding. */
/* */
typedef enum FT_Encoding_
{
FT_ENC_TAG( FT_ENCODING_NONE, 0, 0, 0, 0 ),
FT_ENC_TAG( FT_ENCODING_MS_SYMBOL, 's', 'y', 'm', 'b' ),
FT_ENC_TAG( FT_ENCODING_UNICODE, 'u', 'n', 'i', 'c' ),
FT_ENC_TAG( FT_ENCODING_SJIS, 's', 'j', 'i', 's' ),
FT_ENC_TAG( FT_ENCODING_GB2312, 'g', 'b', ' ', ' ' ),
FT_ENC_TAG( FT_ENCODING_BIG5, 'b', 'i', 'g', '5' ),
FT_ENC_TAG( FT_ENCODING_WANSUNG, 'w', 'a', 'n', 's' ),
FT_ENC_TAG( FT_ENCODING_JOHAB, 'j', 'o', 'h', 'a' ),
/* for backwards compatibility */
FT_ENCODING_MS_SJIS = FT_ENCODING_SJIS,
FT_ENCODING_MS_GB2312 = FT_ENCODING_GB2312,
FT_ENCODING_MS_BIG5 = FT_ENCODING_BIG5,
FT_ENCODING_MS_WANSUNG = FT_ENCODING_WANSUNG,
FT_ENCODING_MS_JOHAB = FT_ENCODING_JOHAB,
FT_ENC_TAG( FT_ENCODING_ADOBE_STANDARD, 'A', 'D', 'O', 'B' ),
FT_ENC_TAG( FT_ENCODING_ADOBE_EXPERT, 'A', 'D', 'B', 'E' ),
FT_ENC_TAG( FT_ENCODING_ADOBE_CUSTOM, 'A', 'D', 'B', 'C' ),
FT_ENC_TAG( FT_ENCODING_ADOBE_LATIN_1, 'l', 'a', 't', '1' ),
FT_ENC_TAG( FT_ENCODING_OLD_LATIN_2, 'l', 'a', 't', '2' ),
FT_ENC_TAG( FT_ENCODING_APPLE_ROMAN, 'a', 'r', 'm', 'n' )
} FT_Encoding;
/*************************************************************************/
/* */
/* <Enum> */
/* ft_encoding_xxx */
/* */
/* <Description> */
/* These constants are deprecated; use the corresponding @FT_Encoding */
/* values instead. */
/* */
#define ft_encoding_none FT_ENCODING_NONE
#define ft_encoding_unicode FT_ENCODING_UNICODE
#define ft_encoding_symbol FT_ENCODING_MS_SYMBOL
#define ft_encoding_latin_1 FT_ENCODING_ADOBE_LATIN_1
#define ft_encoding_latin_2 FT_ENCODING_OLD_LATIN_2
#define ft_encoding_sjis FT_ENCODING_SJIS
#define ft_encoding_gb2312 FT_ENCODING_GB2312
#define ft_encoding_big5 FT_ENCODING_BIG5
#define ft_encoding_wansung FT_ENCODING_WANSUNG
#define ft_encoding_johab FT_ENCODING_JOHAB
#define ft_encoding_adobe_standard FT_ENCODING_ADOBE_STANDARD
#define ft_encoding_adobe_expert FT_ENCODING_ADOBE_EXPERT
#define ft_encoding_adobe_custom FT_ENCODING_ADOBE_CUSTOM
#define ft_encoding_apple_roman FT_ENCODING_APPLE_ROMAN
/*************************************************************************/
/* */
/* <Struct> */
/* FT_CharMapRec */
/* */
/* <Description> */
/* The base charmap structure. */
/* */
/* <Fields> */
/* face :: A handle to the parent face object. */
/* */
/* encoding :: An @FT_Encoding tag identifying the charmap. Use */
/* this with @FT_Select_Charmap. */
/* */
/* platform_id :: An ID number describing the platform for the */
/* following encoding ID. This comes directly from */
/* the TrueType specification and should be emulated */
/* for other formats. */
/* */
/* encoding_id :: A platform specific encoding number. This also */
/* comes from the TrueType specification and should be */
/* emulated similarly. */
/* */
typedef struct FT_CharMapRec_
{
FT_Face face;
FT_Encoding encoding;
FT_UShort platform_id;
FT_UShort encoding_id;
} FT_CharMapRec;
/*************************************************************************/
/*************************************************************************/
/* */
/* B A S E O B J E C T C L A S S E S */
/* */
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Type> */
/* FT_Face_Internal */
/* */
/* <Description> */
/* An opaque handle to an `FT_Face_InternalRec' structure, used to */
/* model private data of a given @FT_Face object. */
/* */
/* This structure might change between releases of FreeType~2 and is */
/* not generally available to client applications. */
/* */
typedef struct FT_Face_InternalRec_* FT_Face_Internal;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_FaceRec */
/* */
/* <Description> */
/* FreeType root face class structure. A face object models a */
/* typeface in a font file. */
/* */
/* <Fields> */
/* num_faces :: The number of faces in the font file. Some */
/* font formats can have multiple faces in */
/* a font file. */
/* */
/* face_index :: The index of the face in the font file. It */
/* is set to~0 if there is only one face in */
/* the font file. */
/* */
/* face_flags :: A set of bit flags that give important */
/* information about the face; see */
/* @FT_FACE_FLAG_XXX for the details. */
/* */
/* style_flags :: A set of bit flags indicating the style of */
/* the face; see @FT_STYLE_FLAG_XXX for the */
/* details. */
/* */
/* num_glyphs :: The number of glyphs in the face. If the */
/* face is scalable and has sbits (see */
/* `num_fixed_sizes'), it is set to the number */
/* of outline glyphs. */
/* */
/* For CID-keyed fonts, this value gives the */
/* highest CID used in the font. */
/* */
/* family_name :: The face's family name. This is an ASCII */
/* string, usually in English, which describes */
/* the typeface's family (like `Times New */
/* Roman', `Bodoni', `Garamond', etc). This */
/* is a least common denominator used to list */
/* fonts. Some formats (TrueType & OpenType) */
/* provide localized and Unicode versions of */
/* this string. Applications should use the */
/* format specific interface to access them. */
/* Can be NULL (e.g., in fonts embedded in a */
/* PDF file). */
/* */
/* style_name :: The face's style name. This is an ASCII */
/* string, usually in English, which describes */
/* the typeface's style (like `Italic', */
/* `Bold', `Condensed', etc). Not all font */
/* formats provide a style name, so this field */
/* is optional, and can be set to NULL. As */
/* for `family_name', some formats provide */
/* localized and Unicode versions of this */
/* string. Applications should use the format */
/* specific interface to access them. */
/* */
/* num_fixed_sizes :: The number of bitmap strikes in the face. */
/* Even if the face is scalable, there might */
/* still be bitmap strikes, which are called */
/* `sbits' in that case. */
/* */
/* available_sizes :: An array of @FT_Bitmap_Size for all bitmap */
/* strikes in the face. It is set to NULL if */
/* there is no bitmap strike. */
/* */
/* num_charmaps :: The number of charmaps in the face. */
/* */
/* charmaps :: An array of the charmaps of the face. */
/* */
/* generic :: A field reserved for client uses. See the */
/* @FT_Generic type description. */
/* */
/* bbox :: The font bounding box. Coordinates are */
/* expressed in font units (see */
/* `units_per_EM'). The box is large enough */
/* to contain any glyph from the font. Thus, */
/* `bbox.yMax' can be seen as the `maximum */
/* ascender', and `bbox.yMin' as the `minimum */
/* descender'. Only relevant for scalable */
/* formats. */
/* */
/* Note that the bounding box might be off by */
/* (at least) one pixel for hinted fonts. See */
/* @FT_Size_Metrics for further discussion. */
/* */
/* units_per_EM :: The number of font units per EM square for */
/* this face. This is typically 2048 for */
/* TrueType fonts, and 1000 for Type~1 fonts. */
/* Only relevant for scalable formats. */
/* */
/* ascender :: The typographic ascender of the face, */
/* expressed in font units. For font formats */
/* not having this information, it is set to */
/* `bbox.yMax'. Only relevant for scalable */
/* formats. */
/* */
/* descender :: The typographic descender of the face, */
/* expressed in font units. For font formats */
/* not having this information, it is set to */
/* `bbox.yMin'. Note that this field is */
/* usually negative. Only relevant for */
/* scalable formats. */
/* */
/* height :: The height is the vertical distance */
/* between two consecutive baselines, */
/* expressed in font units. It is always */
/* positive. Only relevant for scalable */
/* formats. */
/* */
/* max_advance_width :: The maximum advance width, in font units, */
/* for all glyphs in this face. This can be */
/* used to make word wrapping computations */
/* faster. Only relevant for scalable */
/* formats. */
/* */
/* max_advance_height :: The maximum advance height, in font units, */
/* for all glyphs in this face. This is only */
/* relevant for vertical layouts, and is set */
/* to `height' for fonts that do not provide */
/* vertical metrics. Only relevant for */
/* scalable formats. */
/* */
/* underline_position :: The position, in font units, of the */
/* underline line for this face. It is the */
/* center of the underlining stem. Only */
/* relevant for scalable formats. */
/* */
/* underline_thickness :: The thickness, in font units, of the */
/* underline for this face. Only relevant for */
/* scalable formats. */
/* */
/* glyph :: The face's associated glyph slot(s). */
/* */
/* size :: The current active size for this face. */
/* */
/* charmap :: The current active charmap for this face. */
/* */
/* <Note> */
/* Fields may be changed after a call to @FT_Attach_File or */
/* @FT_Attach_Stream. */
/* */
typedef struct FT_FaceRec_
{
FT_Long num_faces;
FT_Long face_index;
FT_Long face_flags;
FT_Long style_flags;
FT_Long num_glyphs;
FT_String* family_name;
FT_String* style_name;
FT_Int num_fixed_sizes;
FT_Bitmap_Size* available_sizes;
FT_Int num_charmaps;
FT_CharMap* charmaps;
FT_Generic generic;
/*# The following member variables (down to `underline_thickness') */
/*# are only relevant to scalable outlines; cf. @FT_Bitmap_Size */
/*# for bitmap fonts. */
FT_BBox bbox;
FT_UShort units_per_EM;
FT_Short ascender;
FT_Short descender;
FT_Short height;
FT_Short max_advance_width;
FT_Short max_advance_height;
FT_Short underline_position;
FT_Short underline_thickness;
FT_GlyphSlot glyph;
FT_Size size;
FT_CharMap charmap;
/*@private begin */
FT_Driver driver;
FT_Memory memory;
FT_Stream stream;
FT_ListRec sizes_list;
/* face-specific auto-hinter data */
FT_Generic autohint;
/* unused */
void* extensions;
FT_Face_Internal internal;
/*@private end */
} FT_FaceRec;
/*************************************************************************/
/* */
/* <Enum> */
/* FT_FACE_FLAG_XXX */
/* */
/* <Description> */
/* A list of bit flags used in the `face_flags' field of the */
/* @FT_FaceRec structure. They inform client applications of */
/* properties of the corresponding face. */
/* */
/* <Values> */
/* FT_FACE_FLAG_SCALABLE :: */
/* Indicates that the face contains outline glyphs. This doesn't */
/* prevent bitmap strikes, i.e., a face can have both this and */
/* and @FT_FACE_FLAG_FIXED_SIZES set. */
/* */
/* FT_FACE_FLAG_FIXED_SIZES :: */
/* Indicates that the face contains bitmap strikes. See also the */
/* `num_fixed_sizes' and `available_sizes' fields of @FT_FaceRec. */
/* */
/* FT_FACE_FLAG_FIXED_WIDTH :: */
/* Indicates that the face contains fixed-width characters (like */
/* Courier, Lucido, MonoType, etc.). */
/* */
/* FT_FACE_FLAG_SFNT :: */
/* Indicates that the face uses the `sfnt' storage scheme. For */
/* now, this means TrueType and OpenType. */
/* */
/* FT_FACE_FLAG_HORIZONTAL :: */
/* Indicates that the face contains horizontal glyph metrics. This */
/* should be set for all common formats. */
/* */
/* FT_FACE_FLAG_VERTICAL :: */
/* Indicates that the face contains vertical glyph metrics. This */
/* is only available in some formats, not all of them. */
/* */
/* FT_FACE_FLAG_KERNING :: */
/* Indicates that the face contains kerning information. If set, */
/* the kerning distance can be retrieved through the function */
/* @FT_Get_Kerning. Otherwise the function always return the */
/* vector (0,0). Note that FreeType doesn't handle kerning data */
/* from the `GPOS' table (as present in some OpenType fonts). */
/* */
/* FT_FACE_FLAG_FAST_GLYPHS :: */
/* THIS FLAG IS DEPRECATED. DO NOT USE OR TEST IT. */
/* */
/* FT_FACE_FLAG_MULTIPLE_MASTERS :: */
/* Indicates that the font contains multiple masters and is capable */
/* of interpolating between them. See the multiple-masters */
/* specific API for details. */
/* */
/* FT_FACE_FLAG_GLYPH_NAMES :: */
/* Indicates that the font contains glyph names that can be */
/* retrieved through @FT_Get_Glyph_Name. Note that some TrueType */
/* fonts contain broken glyph name tables. Use the function */
/* @FT_Has_PS_Glyph_Names when needed. */
/* */
/* FT_FACE_FLAG_EXTERNAL_STREAM :: */
/* Used internally by FreeType to indicate that a face's stream was */
/* provided by the client application and should not be destroyed */
/* when @FT_Done_Face is called. Don't read or test this flag. */
/* */
/* FT_FACE_FLAG_HINTER :: */
/* Set if the font driver has a hinting machine of its own. For */
/* example, with TrueType fonts, it makes sense to use data from */
/* the SFNT `gasp' table only if the native TrueType hinting engine */
/* (with the bytecode interpreter) is available and active. */
/* */
/* FT_FACE_FLAG_CID_KEYED :: */
/* Set if the font is CID-keyed. In that case, the font is not */
/* accessed by glyph indices but by CID values. For subsetted */
/* CID-keyed fonts this has the consequence that not all index */
/* values are a valid argument to FT_Load_Glyph. Only the CID */
/* values for which corresponding glyphs in the subsetted font */
/* exist make FT_Load_Glyph return successfully; in all other cases */
/* you get an `FT_Err_Invalid_Argument' error. */
/* */
/* Note that CID-keyed fonts which are in an SFNT wrapper don't */
/* have this flag set since the glyphs are accessed in the normal */
/* way (using contiguous indices); the `CID-ness' isn't visible to */
/* the application. */
/* */
/* FT_FACE_FLAG_TRICKY :: */
/* Set if the font is `tricky', this is, it always needs the */
/* font format's native hinting engine to get a reasonable result. */
/* A typical example is the Chinese font `mingli.ttf' which uses */
/* TrueType bytecode instructions to move and scale all of its */
/* subglyphs. */
/* */
/* It is not possible to autohint such fonts using */
/* @FT_LOAD_FORCE_AUTOHINT; it will also ignore */
/* @FT_LOAD_NO_HINTING. You have to set both @FT_LOAD_NO_HINTING */
/* and @FT_LOAD_NO_AUTOHINT to really disable hinting; however, you */
/* probably never want this except for demonstration purposes. */
/* */
/* Currently, there are about a dozen TrueType fonts in the list of */
/* tricky fonts; they are hard-coded in file `ttobjs.c'. */
/* */
#define FT_FACE_FLAG_SCALABLE ( 1L << 0 )
#define FT_FACE_FLAG_FIXED_SIZES ( 1L << 1 )
#define FT_FACE_FLAG_FIXED_WIDTH ( 1L << 2 )
#define FT_FACE_FLAG_SFNT ( 1L << 3 )
#define FT_FACE_FLAG_HORIZONTAL ( 1L << 4 )
#define FT_FACE_FLAG_VERTICAL ( 1L << 5 )
#define FT_FACE_FLAG_KERNING ( 1L << 6 )
#define FT_FACE_FLAG_FAST_GLYPHS ( 1L << 7 )
#define FT_FACE_FLAG_MULTIPLE_MASTERS ( 1L << 8 )
#define FT_FACE_FLAG_GLYPH_NAMES ( 1L << 9 )
#define FT_FACE_FLAG_EXTERNAL_STREAM ( 1L << 10 )
#define FT_FACE_FLAG_HINTER ( 1L << 11 )
#define FT_FACE_FLAG_CID_KEYED ( 1L << 12 )
#define FT_FACE_FLAG_TRICKY ( 1L << 13 )
/*************************************************************************
*
* @macro:
* FT_HAS_HORIZONTAL( face )
*
* @description:
* A macro that returns true whenever a face object contains
* horizontal metrics (this is true for all font formats though).
*
* @also:
* @FT_HAS_VERTICAL can be used to check for vertical metrics.
*
*/
#define FT_HAS_HORIZONTAL( face ) \
( face->face_flags & FT_FACE_FLAG_HORIZONTAL )
/*************************************************************************
*
* @macro:
* FT_HAS_VERTICAL( face )
*
* @description:
* A macro that returns true whenever a face object contains real
* vertical metrics (and not only synthesized ones).
*
*/
#define FT_HAS_VERTICAL( face ) \
( face->face_flags & FT_FACE_FLAG_VERTICAL )
/*************************************************************************
*
* @macro:
* FT_HAS_KERNING( face )
*
* @description:
* A macro that returns true whenever a face object contains kerning
* data that can be accessed with @FT_Get_Kerning.
*
*/
#define FT_HAS_KERNING( face ) \
( face->face_flags & FT_FACE_FLAG_KERNING )
/*************************************************************************
*
* @macro:
* FT_IS_SCALABLE( face )
*
* @description:
* A macro that returns true whenever a face object contains a scalable
* font face (true for TrueType, Type~1, Type~42, CID, OpenType/CFF,
* and PFR font formats.
*
*/
#define FT_IS_SCALABLE( face ) \
( face->face_flags & FT_FACE_FLAG_SCALABLE )
/*************************************************************************
*
* @macro:
* FT_IS_SFNT( face )
*
* @description:
* A macro that returns true whenever a face object contains a font
* whose format is based on the SFNT storage scheme. This usually
* means: TrueType fonts, OpenType fonts, as well as SFNT-based embedded
* bitmap fonts.
*
* If this macro is true, all functions defined in @FT_SFNT_NAMES_H and
* @FT_TRUETYPE_TABLES_H are available.
*
*/
#define FT_IS_SFNT( face ) \
( face->face_flags & FT_FACE_FLAG_SFNT )
/*************************************************************************
*
* @macro:
* FT_IS_FIXED_WIDTH( face )
*
* @description:
* A macro that returns true whenever a face object contains a font face
* that contains fixed-width (or `monospace', `fixed-pitch', etc.)
* glyphs.
*
*/
#define FT_IS_FIXED_WIDTH( face ) \
( face->face_flags & FT_FACE_FLAG_FIXED_WIDTH )
/*************************************************************************
*
* @macro:
* FT_HAS_FIXED_SIZES( face )
*
* @description:
* A macro that returns true whenever a face object contains some
* embedded bitmaps. See the `available_sizes' field of the
* @FT_FaceRec structure.
*
*/
#define FT_HAS_FIXED_SIZES( face ) \
( face->face_flags & FT_FACE_FLAG_FIXED_SIZES )
/*************************************************************************
*
* @macro:
* FT_HAS_FAST_GLYPHS( face )
*
* @description:
* Deprecated.
*
*/
#define FT_HAS_FAST_GLYPHS( face ) 0
/*************************************************************************
*
* @macro:
* FT_HAS_GLYPH_NAMES( face )
*
* @description:
* A macro that returns true whenever a face object contains some glyph
* names that can be accessed through @FT_Get_Glyph_Name.
*
*/
#define FT_HAS_GLYPH_NAMES( face ) \
( face->face_flags & FT_FACE_FLAG_GLYPH_NAMES )
/*************************************************************************
*
* @macro:
* FT_HAS_MULTIPLE_MASTERS( face )
*
* @description:
* A macro that returns true whenever a face object contains some
* multiple masters. The functions provided by @FT_MULTIPLE_MASTERS_H
* are then available to choose the exact design you want.
*
*/
#define FT_HAS_MULTIPLE_MASTERS( face ) \
( face->face_flags & FT_FACE_FLAG_MULTIPLE_MASTERS )
/*************************************************************************
*
* @macro:
* FT_IS_CID_KEYED( face )
*
* @description:
* A macro that returns true whenever a face object contains a CID-keyed
* font. See the discussion of @FT_FACE_FLAG_CID_KEYED for more
* details.
*
* If this macro is true, all functions defined in @FT_CID_H are
* available.
*
*/
#define FT_IS_CID_KEYED( face ) \
( face->face_flags & FT_FACE_FLAG_CID_KEYED )
/*************************************************************************
*
* @macro:
* FT_IS_TRICKY( face )
*
* @description:
* A macro that returns true whenever a face represents a `tricky' font.
* See the discussion of @FT_FACE_FLAG_TRICKY for more details.
*
*/
#define FT_IS_TRICKY( face ) \
( face->face_flags & FT_FACE_FLAG_TRICKY )
/*************************************************************************/
/* */
/* <Const> */
/* FT_STYLE_FLAG_XXX */
/* */
/* <Description> */
/* A list of bit-flags used to indicate the style of a given face. */
/* These are used in the `style_flags' field of @FT_FaceRec. */
/* */
/* <Values> */
/* FT_STYLE_FLAG_ITALIC :: */
/* Indicates that a given face style is italic or oblique. */
/* */
/* FT_STYLE_FLAG_BOLD :: */
/* Indicates that a given face is bold. */
/* */
/* <Note> */
/* The style information as provided by FreeType is very basic. More */
/* details are beyond the scope and should be done on a higher level */
/* (for example, by analyzing various fields of the `OS/2' table in */
/* SFNT based fonts). */
/* */
#define FT_STYLE_FLAG_ITALIC ( 1 << 0 )
#define FT_STYLE_FLAG_BOLD ( 1 << 1 )
/*************************************************************************/
/* */
/* <Type> */
/* FT_Size_Internal */
/* */
/* <Description> */
/* An opaque handle to an `FT_Size_InternalRec' structure, used to */
/* model private data of a given @FT_Size object. */
/* */
typedef struct FT_Size_InternalRec_* FT_Size_Internal;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Size_Metrics */
/* */
/* <Description> */
/* The size metrics structure gives the metrics of a size object. */
/* */
/* <Fields> */
/* x_ppem :: The width of the scaled EM square in pixels, hence */
/* the term `ppem' (pixels per EM). It is also */
/* referred to as `nominal width'. */
/* */
/* y_ppem :: The height of the scaled EM square in pixels, */
/* hence the term `ppem' (pixels per EM). It is also */
/* referred to as `nominal height'. */
/* */
/* x_scale :: A 16.16 fractional scaling value used to convert */
/* horizontal metrics from font units to 26.6 */
/* fractional pixels. Only relevant for scalable */
/* font formats. */
/* */
/* y_scale :: A 16.16 fractional scaling value used to convert */
/* vertical metrics from font units to 26.6 */
/* fractional pixels. Only relevant for scalable */
/* font formats. */
/* */
/* ascender :: The ascender in 26.6 fractional pixels. See */
/* @FT_FaceRec for the details. */
/* */
/* descender :: The descender in 26.6 fractional pixels. See */
/* @FT_FaceRec for the details. */
/* */
/* height :: The height in 26.6 fractional pixels. See */
/* @FT_FaceRec for the details. */
/* */
/* max_advance :: The maximum advance width in 26.6 fractional */
/* pixels. See @FT_FaceRec for the details. */
/* */
/* <Note> */
/* The scaling values, if relevant, are determined first during a */
/* size changing operation. The remaining fields are then set by the */
/* driver. For scalable formats, they are usually set to scaled */
/* values of the corresponding fields in @FT_FaceRec. */
/* */
/* Note that due to glyph hinting, these values might not be exact */
/* for certain fonts. Thus they must be treated as unreliable */
/* with an error margin of at least one pixel! */
/* */
/* Indeed, the only way to get the exact metrics is to render _all_ */
/* glyphs. As this would be a definite performance hit, it is up to */
/* client applications to perform such computations. */
/* */
/* The FT_Size_Metrics structure is valid for bitmap fonts also. */
/* */
typedef struct FT_Size_Metrics_
{
/* horizontal pixels per EM */
FT_UShort x_ppem;
/* vertical pixels per EM */
FT_UShort y_ppem;
/* scaling values used to convert font */
FT_Fixed x_scale;
/* units to 26.6 fractional pixels */
FT_Fixed y_scale;
/* ascender in 26.6 frac. pixels */
FT_Pos ascender;
/* descender in 26.6 frac. pixels */
FT_Pos descender;
/* text height in 26.6 frac. pixels */
FT_Pos height;
/* max horizontal advance, in 26.6 pixels */
FT_Pos max_advance;
} FT_Size_Metrics;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_SizeRec */
/* */
/* <Description> */
/* FreeType root size class structure. A size object models a face */
/* object at a given size. */
/* */
/* <Fields> */
/* face :: Handle to the parent face object. */
/* */
/* generic :: A typeless pointer, which is unused by the FreeType */
/* library or any of its drivers. It can be used by */
/* client applications to link their own data to each size */
/* object. */
/* */
/* metrics :: Metrics for this size object. This field is read-only. */
/* */
typedef struct FT_SizeRec_
{
/* parent face object */
FT_Face face;
/* generic pointer for client uses */
FT_Generic generic;
/* size metrics */
FT_Size_Metrics metrics;
FT_Size_Internal internal;
} FT_SizeRec;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_SubGlyph */
/* */
/* <Description> */
/* The subglyph structure is an internal object used to describe */
/* subglyphs (for example, in the case of composites). */
/* */
/* <Note> */
/* The subglyph implementation is not part of the high-level API, */
/* hence the forward structure declaration. */
/* */
/* You can however retrieve subglyph information with */
/* @FT_Get_SubGlyph_Info. */
/* */
typedef struct FT_SubGlyphRec_* FT_SubGlyph;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Slot_Internal */
/* */
/* <Description> */
/* An opaque handle to an `FT_Slot_InternalRec' structure, used to */
/* model private data of a given @FT_GlyphSlot object. */
/* */
typedef struct FT_Slot_InternalRec_* FT_Slot_Internal;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_GlyphSlotRec */
/* */
/* <Description> */
/* FreeType root glyph slot class structure. A glyph slot is a */
/* container where individual glyphs can be loaded, be they in */
/* outline or bitmap format. */
/* */
/* <Fields> */
/* library :: A handle to the FreeType library instance */
/* this slot belongs to. */
/* */
/* face :: A handle to the parent face object. */
/* */
/* next :: In some cases (like some font tools), several */
/* glyph slots per face object can be a good */
/* thing. As this is rare, the glyph slots are */
/* listed through a direct, single-linked list */
/* using its `next' field. */
/* */
/* generic :: A typeless pointer which is unused by the */
/* FreeType library or any of its drivers. It */
/* can be used by client applications to link */
/* their own data to each glyph slot object. */
/* */
/* metrics :: The metrics of the last loaded glyph in the */
/* slot. The returned values depend on the last */
/* load flags (see the @FT_Load_Glyph API */
/* function) and can be expressed either in 26.6 */
/* fractional pixels or font units. */
/* */
/* Note that even when the glyph image is */
/* transformed, the metrics are not. */
/* */
/* linearHoriAdvance :: The advance width of the unhinted glyph. */
/* Its value is expressed in 16.16 fractional */
/* pixels, unless @FT_LOAD_LINEAR_DESIGN is set */
/* when loading the glyph. This field can be */
/* important to perform correct WYSIWYG layout. */
/* Only relevant for outline glyphs. */
/* */
/* linearVertAdvance :: The advance height of the unhinted glyph. */
/* Its value is expressed in 16.16 fractional */
/* pixels, unless @FT_LOAD_LINEAR_DESIGN is set */
/* when loading the glyph. This field can be */
/* important to perform correct WYSIWYG layout. */
/* Only relevant for outline glyphs. */
/* */
/* advance :: This shorthand is, depending on */
/* @FT_LOAD_IGNORE_TRANSFORM, the transformed */
/* advance width for the glyph (in 26.6 */
/* fractional pixel format). As specified with */
/* @FT_LOAD_VERTICAL_LAYOUT, it uses either the */
/* `horiAdvance' or the `vertAdvance' value of */
/* `metrics' field. */
/* */
/* format :: This field indicates the format of the image */
/* contained in the glyph slot. Typically */
/* @FT_GLYPH_FORMAT_BITMAP, */
/* @FT_GLYPH_FORMAT_OUTLINE, or */
/* @FT_GLYPH_FORMAT_COMPOSITE, but others are */
/* possible. */
/* */
/* bitmap :: This field is used as a bitmap descriptor */
/* when the slot format is */
/* @FT_GLYPH_FORMAT_BITMAP. Note that the */
/* address and content of the bitmap buffer can */
/* change between calls of @FT_Load_Glyph and a */
/* few other functions. */
/* */
/* bitmap_left :: This is the bitmap's left bearing expressed */
/* in integer pixels. Of course, this is only */
/* valid if the format is */
/* @FT_GLYPH_FORMAT_BITMAP. */
/* */
/* bitmap_top :: This is the bitmap's top bearing expressed in */
/* integer pixels. Remember that this is the */
/* distance from the baseline to the top-most */
/* glyph scanline, upwards y~coordinates being */
/* *positive*. */
/* */
/* outline :: The outline descriptor for the current glyph */
/* image if its format is */
/* @FT_GLYPH_FORMAT_OUTLINE. Once a glyph is */
/* loaded, `outline' can be transformed, */
/* distorted, embolded, etc. However, it must */
/* not be freed. */
/* */
/* num_subglyphs :: The number of subglyphs in a composite glyph. */
/* This field is only valid for the composite */
/* glyph format that should normally only be */
/* loaded with the @FT_LOAD_NO_RECURSE flag. */
/* For now this is internal to FreeType. */
/* */
/* subglyphs :: An array of subglyph descriptors for */
/* composite glyphs. There are `num_subglyphs' */
/* elements in there. Currently internal to */
/* FreeType. */
/* */
/* control_data :: Certain font drivers can also return the */
/* control data for a given glyph image (e.g. */
/* TrueType bytecode, Type~1 charstrings, etc.). */
/* This field is a pointer to such data. */
/* */
/* control_len :: This is the length in bytes of the control */
/* data. */
/* */
/* other :: Really wicked formats can use this pointer to */
/* present their own glyph image to client */
/* applications. Note that the application */
/* needs to know about the image format. */
/* */
/* lsb_delta :: The difference between hinted and unhinted */
/* left side bearing while autohinting is */
/* active. Zero otherwise. */
/* */
/* rsb_delta :: The difference between hinted and unhinted */
/* right side bearing while autohinting is */
/* active. Zero otherwise. */
/* */
/* <Note> */
/* If @FT_Load_Glyph is called with default flags (see */
/* @FT_LOAD_DEFAULT) the glyph image is loaded in the glyph slot in */
/* its native format (e.g., an outline glyph for TrueType and Type~1 */
/* formats). */
/* */
/* This image can later be converted into a bitmap by calling */
/* @FT_Render_Glyph. This function finds the current renderer for */
/* the native image's format, then invokes it. */
/* */
/* The renderer is in charge of transforming the native image through */
/* the slot's face transformation fields, then converting it into a */
/* bitmap that is returned in `slot->bitmap'. */
/* */
/* Note that `slot->bitmap_left' and `slot->bitmap_top' are also used */
/* to specify the position of the bitmap relative to the current pen */
/* position (e.g., coordinates (0,0) on the baseline). Of course, */
/* `slot->format' is also changed to @FT_GLYPH_FORMAT_BITMAP. */
/* */
/* <Note> */
/* Here a small pseudo code fragment which shows how to use */
/* `lsb_delta' and `rsb_delta': */
/* */
/* { */
/* FT_Pos origin_x = 0; */
/* FT_Pos prev_rsb_delta = 0; */
/* */
/* */
/* for all glyphs do */
/* <compute kern between current and previous glyph and add it to */
/* `origin_x'> */
/* */
/* <load glyph with `FT_Load_Glyph'> */
/* */
/* if ( prev_rsb_delta - face->glyph->lsb_delta >= 32 ) */
/* origin_x -= 64; */
/* else if ( prev_rsb_delta - face->glyph->lsb_delta < -32 ) */
/* origin_x += 64; */
/* */
/* prev_rsb_delta = face->glyph->rsb_delta; */
/* */
/* <save glyph image, or render glyph, or ...> */
/* */
/* origin_x += face->glyph->advance.x; */
/* endfor */
/* } */
/* */
typedef struct FT_GlyphSlotRec_
{
FT_Library library;
FT_Face face;
FT_GlyphSlot next;
/* retained for binary compatibility */
FT_UInt reserved;
FT_Generic generic;
FT_Glyph_Metrics metrics;
FT_Fixed linearHoriAdvance;
FT_Fixed linearVertAdvance;
FT_Vector advance;
FT_Glyph_Format format;
FT_Bitmap bitmap;
FT_Int bitmap_left;
FT_Int bitmap_top;
FT_Outline outline;
FT_UInt num_subglyphs;
FT_SubGlyph subglyphs;
void* control_data;
long control_len;
FT_Pos lsb_delta;
FT_Pos rsb_delta;
void* other;
FT_Slot_Internal internal;
} FT_GlyphSlotRec;
/*************************************************************************/
/*************************************************************************/
/* */
/* F U N C T I O N S */
/* */
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_Init_FreeType */
/* */
/* <Description> */
/* Initialize a new FreeType library object. The set of modules */
/* that are registered by this function is determined at build time. */
/* */
/* <Output> */
/* alibrary :: A handle to a new library object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* In case you want to provide your own memory allocating routines, */
/* use @FT_New_Library instead, followed by a call to */
/* @FT_Add_Default_Modules (or a series of calls to @FT_Add_Module). */
/* */
/* For multi-threading applications each thread should have its own */
/* FT_Library object. */
/* */
FT_EXPORT( FT_Error )
FT_Init_FreeType( FT_Library *alibrary );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Done_FreeType */
/* */
/* <Description> */
/* Destroy a given FreeType library object and all of its children, */
/* including resources, drivers, faces, sizes, etc. */
/* */
/* <Input> */
/* library :: A handle to the target library object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Done_FreeType( FT_Library library );
/*************************************************************************/
/* */
/* <Enum> */
/* FT_OPEN_XXX */
/* */
/* <Description> */
/* A list of bit-field constants used within the `flags' field of the */
/* @FT_Open_Args structure. */
/* */
/* <Values> */
/* FT_OPEN_MEMORY :: This is a memory-based stream. */
/* */
/* FT_OPEN_STREAM :: Copy the stream from the `stream' field. */
/* */
/* FT_OPEN_PATHNAME :: Create a new input stream from a C~path */
/* name. */
/* */
/* FT_OPEN_DRIVER :: Use the `driver' field. */
/* */
/* FT_OPEN_PARAMS :: Use the `num_params' and `params' fields. */
/* */
/* ft_open_memory :: Deprecated; use @FT_OPEN_MEMORY instead. */
/* */
/* ft_open_stream :: Deprecated; use @FT_OPEN_STREAM instead. */
/* */
/* ft_open_pathname :: Deprecated; use @FT_OPEN_PATHNAME instead. */
/* */
/* ft_open_driver :: Deprecated; use @FT_OPEN_DRIVER instead. */
/* */
/* ft_open_params :: Deprecated; use @FT_OPEN_PARAMS instead. */
/* */
/* <Note> */
/* The `FT_OPEN_MEMORY', `FT_OPEN_STREAM', and `FT_OPEN_PATHNAME' */
/* flags are mutually exclusive. */
/* */
#define FT_OPEN_MEMORY 0x1
#define FT_OPEN_STREAM 0x2
#define FT_OPEN_PATHNAME 0x4
#define FT_OPEN_DRIVER 0x8
#define FT_OPEN_PARAMS 0x10
/* deprecated */
#define ft_open_memory FT_OPEN_MEMORY
/* deprecated */
#define ft_open_stream FT_OPEN_STREAM
/* deprecated */
#define ft_open_pathname FT_OPEN_PATHNAME
/* deprecated */
#define ft_open_driver FT_OPEN_DRIVER
/* deprecated */
#define ft_open_params FT_OPEN_PARAMS
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Parameter */
/* */
/* <Description> */
/* A simple structure used to pass more or less generic parameters to */
/* @FT_Open_Face. */
/* */
/* <Fields> */
/* tag :: A four-byte identification tag. */
/* */
/* data :: A pointer to the parameter data. */
/* */
/* <Note> */
/* The ID and function of parameters are driver-specific. See the */
/* various FT_PARAM_TAG_XXX flags for more information. */
/* */
typedef struct FT_Parameter_
{
FT_ULong tag;
FT_Pointer data;
} FT_Parameter;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Open_Args */
/* */
/* <Description> */
/* A structure used to indicate how to open a new font file or */
/* stream. A pointer to such a structure can be used as a parameter */
/* for the functions @FT_Open_Face and @FT_Attach_Stream. */
/* */
/* <Fields> */
/* flags :: A set of bit flags indicating how to use the */
/* structure. */
/* */
/* memory_base :: The first byte of the file in memory. */
/* */
/* memory_size :: The size in bytes of the file in memory. */
/* */
/* pathname :: A pointer to an 8-bit file pathname. */
/* */
/* stream :: A handle to a source stream object. */
/* */
/* driver :: This field is exclusively used by @FT_Open_Face; */
/* it simply specifies the font driver to use to open */
/* the face. If set to~0, FreeType tries to load the */
/* face with each one of the drivers in its list. */
/* */
/* num_params :: The number of extra parameters. */
/* */
/* params :: Extra parameters passed to the font driver when */
/* opening a new face. */
/* */
/* <Note> */
/* The stream type is determined by the contents of `flags' which */
/* are tested in the following order by @FT_Open_Face: */
/* */
/* If the `FT_OPEN_MEMORY' bit is set, assume that this is a */
/* memory file of `memory_size' bytes, located at `memory_address'. */
/* The data are are not copied, and the client is responsible for */
/* releasing and destroying them _after_ the corresponding call to */
/* @FT_Done_Face. */
/* */
/* Otherwise, if the `FT_OPEN_STREAM' bit is set, assume that a */
/* custom input stream `stream' is used. */
/* */
/* Otherwise, if the `FT_OPEN_PATHNAME' bit is set, assume that this */
/* is a normal file and use `pathname' to open it. */
/* */
/* If the `FT_OPEN_DRIVER' bit is set, @FT_Open_Face only tries to */
/* open the file with the driver whose handler is in `driver'. */
/* */
/* If the `FT_OPEN_PARAMS' bit is set, the parameters given by */
/* `num_params' and `params' is used. They are ignored otherwise. */
/* */
/* Ideally, both the `pathname' and `params' fields should be tagged */
/* as `const'; this is missing for API backwards compatibility. In */
/* other words, applications should treat them as read-only. */
/* */
typedef struct FT_Open_Args_
{
FT_UInt flags;
const FT_Byte* memory_base;
FT_Long memory_size;
FT_String* pathname;
FT_Stream stream;
FT_Module driver;
FT_Int num_params;
FT_Parameter* params;
} FT_Open_Args;
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Face */
/* */
/* <Description> */
/* This function calls @FT_Open_Face to open a font by its pathname. */
/* */
/* <InOut> */
/* library :: A handle to the library resource. */
/* */
/* <Input> */
/* pathname :: A path to the font file. */
/* */
/* face_index :: The index of the face within the font. The first */
/* face has index~0. */
/* */
/* <Output> */
/* aface :: A handle to a new face object. If `face_index' is */
/* greater than or equal to zero, it must be non-NULL. */
/* See @FT_Open_Face for more details. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_New_Face( FT_Library library,
const char* filepathname,
FT_Long face_index,
FT_Face *aface );
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Memory_Face */
/* */
/* <Description> */
/* This function calls @FT_Open_Face to open a font which has been */
/* loaded into memory. */
/* */
/* <InOut> */
/* library :: A handle to the library resource. */
/* */
/* <Input> */
/* file_base :: A pointer to the beginning of the font data. */
/* */
/* file_size :: The size of the memory chunk used by the font data. */
/* */
/* face_index :: The index of the face within the font. The first */
/* face has index~0. */
/* */
/* <Output> */
/* aface :: A handle to a new face object. If `face_index' is */
/* greater than or equal to zero, it must be non-NULL. */
/* See @FT_Open_Face for more details. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* You must not deallocate the memory before calling @FT_Done_Face. */
/* */
FT_EXPORT( FT_Error )
FT_New_Memory_Face( FT_Library library,
const FT_Byte* file_base,
FT_Long file_size,
FT_Long face_index,
FT_Face *aface );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Open_Face */
/* */
/* <Description> */
/* Create a face object from a given resource described by */
/* @FT_Open_Args. */
/* */
/* <InOut> */
/* library :: A handle to the library resource. */
/* */
/* <Input> */
/* args :: A pointer to an `FT_Open_Args' structure which must */
/* be filled by the caller. */
/* */
/* face_index :: The index of the face within the font. The first */
/* face has index~0. */
/* */
/* <Output> */
/* aface :: A handle to a new face object. If `face_index' is */
/* greater than or equal to zero, it must be non-NULL. */
/* See note below. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* Unlike FreeType 1.x, this function automatically creates a glyph */
/* slot for the face object which can be accessed directly through */
/* `face->glyph'. */
/* */
/* FT_Open_Face can be used to quickly check whether the font */
/* format of a given font resource is supported by FreeType. If the */
/* `face_index' field is negative, the function's return value is~0 */
/* if the font format is recognized, or non-zero otherwise; */
/* the function returns a more or less empty face handle in `*aface' */
/* (if `aface' isn't NULL). The only useful field in this special */
/* case is `face->num_faces' which gives the number of faces within */
/* the font file. After examination, the returned @FT_Face structure */
/* should be deallocated with a call to @FT_Done_Face. */
/* */
/* Each new face object created with this function also owns a */
/* default @FT_Size object, accessible as `face->size'. */
/* */
/* One @FT_Library instance can have multiple face objects, this is, */
/* @FT_Open_Face and its siblings can be called multiple times using */
/* the same `library' argument. */
/* */
/* See the discussion of reference counters in the description of */
/* @FT_Reference_Face. */
/* */
FT_EXPORT( FT_Error )
FT_Open_Face( FT_Library library,
const FT_Open_Args* args,
FT_Long face_index,
FT_Face *aface );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Attach_File */
/* */
/* <Description> */
/* This function calls @FT_Attach_Stream to attach a file. */
/* */
/* <InOut> */
/* face :: The target face object. */
/* */
/* <Input> */
/* filepathname :: The pathname. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Attach_File( FT_Face face,
const char* filepathname );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Attach_Stream */
/* */
/* <Description> */
/* `Attach' data to a face object. Normally, this is used to read */
/* additional information for the face object. For example, you can */
/* attach an AFM file that comes with a Type~1 font to get the */
/* kerning values and other metrics. */
/* */
/* <InOut> */
/* face :: The target face object. */
/* */
/* <Input> */
/* parameters :: A pointer to @FT_Open_Args which must be filled by */
/* the caller. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* The meaning of the `attach' (i.e., what really happens when the */
/* new file is read) is not fixed by FreeType itself. It really */
/* depends on the font format (and thus the font driver). */
/* */
/* Client applications are expected to know what they are doing */
/* when invoking this function. Most drivers simply do not implement */
/* file attachments. */
/* */
FT_EXPORT( FT_Error )
FT_Attach_Stream( FT_Face face,
FT_Open_Args* parameters );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Reference_Face */
/* */
/* <Description> */
/* A counter gets initialized to~1 at the time an @FT_Face structure */
/* is created. This function increments the counter. @FT_Done_Face */
/* then only destroys a face if the counter is~1, otherwise it simply */
/* decrements the counter. */
/* */
/* This function helps in managing life-cycles of structures which */
/* reference @FT_Face objects. */
/* */
/* <Input> */
/* face :: A handle to a target face object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Since> */
/* 2.4.2 */
/* */
FT_EXPORT( FT_Error )
FT_Reference_Face( FT_Face face );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Done_Face */
/* */
/* <Description> */
/* Discard a given face object, as well as all of its child slots and */
/* sizes. */
/* */
/* <Input> */
/* face :: A handle to a target face object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* See the discussion of reference counters in the description of */
/* @FT_Reference_Face. */
/* */
FT_EXPORT( FT_Error )
FT_Done_Face( FT_Face face );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Select_Size */
/* */
/* <Description> */
/* Select a bitmap strike. */
/* */
/* <InOut> */
/* face :: A handle to a target face object. */
/* */
/* <Input> */
/* strike_index :: The index of the bitmap strike in the */
/* `available_sizes' field of @FT_FaceRec structure. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Select_Size( FT_Face face,
FT_Int strike_index );
/*************************************************************************/
/* */
/* <Enum> */
/* FT_Size_Request_Type */
/* */
/* <Description> */
/* An enumeration type that lists the supported size request types. */
/* */
/* <Values> */
/* FT_SIZE_REQUEST_TYPE_NOMINAL :: */
/* The nominal size. The `units_per_EM' field of @FT_FaceRec is */
/* used to determine both scaling values. */
/* */
/* FT_SIZE_REQUEST_TYPE_REAL_DIM :: */
/* The real dimension. The sum of the the `ascender' and (minus */
/* of) the `descender' fields of @FT_FaceRec are used to determine */
/* both scaling values. */
/* */
/* FT_SIZE_REQUEST_TYPE_BBOX :: */
/* The font bounding box. The width and height of the `bbox' field */
/* of @FT_FaceRec are used to determine the horizontal and vertical */
/* scaling value, respectively. */
/* */
/* FT_SIZE_REQUEST_TYPE_CELL :: */
/* The `max_advance_width' field of @FT_FaceRec is used to */
/* determine the horizontal scaling value; the vertical scaling */
/* value is determined the same way as */
/* @FT_SIZE_REQUEST_TYPE_REAL_DIM does. Finally, both scaling */
/* values are set to the smaller one. This type is useful if you */
/* want to specify the font size for, say, a window of a given */
/* dimension and 80x24 cells. */
/* */
/* FT_SIZE_REQUEST_TYPE_SCALES :: */
/* Specify the scaling values directly. */
/* */
/* <Note> */
/* The above descriptions only apply to scalable formats. For bitmap */
/* formats, the behaviour is up to the driver. */
/* */
/* See the note section of @FT_Size_Metrics if you wonder how size */
/* requesting relates to scaling values. */
/* */
typedef enum FT_Size_Request_Type_
{
FT_SIZE_REQUEST_TYPE_NOMINAL,
FT_SIZE_REQUEST_TYPE_REAL_DIM,
FT_SIZE_REQUEST_TYPE_BBOX,
FT_SIZE_REQUEST_TYPE_CELL,
FT_SIZE_REQUEST_TYPE_SCALES,
FT_SIZE_REQUEST_TYPE_MAX
} FT_Size_Request_Type;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Size_RequestRec */
/* */
/* <Description> */
/* A structure used to model a size request. */
/* */
/* <Fields> */
/* type :: See @FT_Size_Request_Type. */
/* */
/* width :: The desired width. */
/* */
/* height :: The desired height. */
/* */
/* horiResolution :: The horizontal resolution. If set to zero, */
/* `width' is treated as a 26.6 fractional pixel */
/* value. */
/* */
/* vertResolution :: The vertical resolution. If set to zero, */
/* `height' is treated as a 26.6 fractional pixel */
/* value. */
/* */
/* <Note> */
/* If `width' is zero, then the horizontal scaling value is set equal */
/* to the vertical scaling value, and vice versa. */
/* */
typedef struct FT_Size_RequestRec_
{
FT_Size_Request_Type type;
FT_Long width;
FT_Long height;
FT_UInt horiResolution;
FT_UInt vertResolution;
} FT_Size_RequestRec;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Size_Request */
/* */
/* <Description> */
/* A handle to a size request structure. */
/* */
typedef struct FT_Size_RequestRec_ *FT_Size_Request;
/*************************************************************************/
/* */
/* <Function> */
/* FT_Request_Size */
/* */
/* <Description> */
/* Resize the scale of the active @FT_Size object in a face. */
/* */
/* <InOut> */
/* face :: A handle to a target face object. */
/* */
/* <Input> */
/* req :: A pointer to a @FT_Size_RequestRec. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* Although drivers may select the bitmap strike matching the */
/* request, you should not rely on this if you intend to select a */
/* particular bitmap strike. Use @FT_Select_Size instead in that */
/* case. */
/* */
/* The relation between the requested size and the resulting glyph */
/* size is dependent entirely on how the size is defined in the */
/* source face. The font designer chooses the final size of each */
/* glyph relative to this size. For more information refer to */
/* `http://www.freetype.org/freetype2/docs/glyphs/glyphs-2.html' */
/* */
FT_EXPORT( FT_Error )
FT_Request_Size( FT_Face face,
FT_Size_Request req );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_Char_Size */
/* */
/* <Description> */
/* This function calls @FT_Request_Size to request the nominal size */
/* (in points). */
/* */
/* <InOut> */
/* face :: A handle to a target face object. */
/* */
/* <Input> */
/* char_width :: The nominal width, in 26.6 fractional points. */
/* */
/* char_height :: The nominal height, in 26.6 fractional points. */
/* */
/* horz_resolution :: The horizontal resolution in dpi. */
/* */
/* vert_resolution :: The vertical resolution in dpi. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* If either the character width or height is zero, it is set equal */
/* to the other value. */
/* */
/* If either the horizontal or vertical resolution is zero, it is set */
/* equal to the other value. */
/* */
/* A character width or height smaller than 1pt is set to 1pt; if */
/* both resolution values are zero, they are set to 72dpi. */
/* */
/* Don't use this function if you are using the FreeType cache API. */
/* */
FT_EXPORT( FT_Error )
FT_Set_Char_Size( FT_Face face,
FT_F26Dot6 char_width,
FT_F26Dot6 char_height,
FT_UInt horz_resolution,
FT_UInt vert_resolution );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_Pixel_Sizes */
/* */
/* <Description> */
/* This function calls @FT_Request_Size to request the nominal size */
/* (in pixels). */
/* */
/* <InOut> */
/* face :: A handle to the target face object. */
/* */
/* <Input> */
/* pixel_width :: The nominal width, in pixels. */
/* */
/* pixel_height :: The nominal height, in pixels. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* You should not rely on the resulting glyphs matching, or being */
/* constrained, to this pixel size. Refer to @FT_Request_Size to */
/* understand how requested sizes relate to actual sizes. */
/* */
FT_EXPORT( FT_Error )
FT_Set_Pixel_Sizes( FT_Face face,
FT_UInt pixel_width,
FT_UInt pixel_height );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Load_Glyph */
/* */
/* <Description> */
/* A function used to load a single glyph into the glyph slot of a */
/* face object. */
/* */
/* <InOut> */
/* face :: A handle to the target face object where the glyph */
/* is loaded. */
/* */
/* <Input> */
/* glyph_index :: The index of the glyph in the font file. For */
/* CID-keyed fonts (either in PS or in CFF format) */
/* this argument specifies the CID value. */
/* */
/* load_flags :: A flag indicating what to load for this glyph. The */
/* @FT_LOAD_XXX constants can be used to control the */
/* glyph loading process (e.g., whether the outline */
/* should be scaled, whether to load bitmaps or not, */
/* whether to hint the outline, etc). */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* The loaded glyph may be transformed. See @FT_Set_Transform for */
/* the details. */
/* */
/* For subsetted CID-keyed fonts, `FT_Err_Invalid_Argument' is */
/* returned for invalid CID values (this is, for CID values which */
/* don't have a corresponding glyph in the font). See the discussion */
/* of the @FT_FACE_FLAG_CID_KEYED flag for more details. */
/* */
FT_EXPORT( FT_Error )
FT_Load_Glyph( FT_Face face,
FT_UInt glyph_index,
FT_Int32 load_flags );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Load_Char */
/* */
/* <Description> */
/* A function used to load a single glyph into the glyph slot of a */
/* face object, according to its character code. */
/* */
/* <InOut> */
/* face :: A handle to a target face object where the glyph */
/* is loaded. */
/* */
/* <Input> */
/* char_code :: The glyph's character code, according to the */
/* current charmap used in the face. */
/* */
/* load_flags :: A flag indicating what to load for this glyph. The */
/* @FT_LOAD_XXX constants can be used to control the */
/* glyph loading process (e.g., whether the outline */
/* should be scaled, whether to load bitmaps or not, */
/* whether to hint the outline, etc). */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* This function simply calls @FT_Get_Char_Index and @FT_Load_Glyph. */
/* */
FT_EXPORT( FT_Error )
FT_Load_Char( FT_Face face,
FT_ULong char_code,
FT_Int32 load_flags );
/*************************************************************************
*
* @enum:
* FT_LOAD_XXX
*
* @description:
* A list of bit-field constants used with @FT_Load_Glyph to indicate
* what kind of operations to perform during glyph loading.
*
* @values:
* FT_LOAD_DEFAULT ::
* Corresponding to~0, this value is used as the default glyph load
* operation. In this case, the following happens:
*
* 1. FreeType looks for a bitmap for the glyph corresponding to the
* face's current size. If one is found, the function returns.
* The bitmap data can be accessed from the glyph slot (see note
* below).
*
* 2. If no embedded bitmap is searched or found, FreeType looks for a
* scalable outline. If one is found, it is loaded from the font
* file, scaled to device pixels, then `hinted' to the pixel grid
* in order to optimize it. The outline data can be accessed from
* the glyph slot (see note below).
*
* Note that by default, the glyph loader doesn't render outlines into
* bitmaps. The following flags are used to modify this default
* behaviour to more specific and useful cases.
*
* FT_LOAD_NO_SCALE ::
* Don't scale the loaded outline glyph but keep it in font units.
*
* This flag implies @FT_LOAD_NO_HINTING and @FT_LOAD_NO_BITMAP, and
* unsets @FT_LOAD_RENDER.
*
* If the font is `tricky' (see @FT_FACE_FLAG_TRICKY for more), using
* FT_LOAD_NO_SCALE usually yields meaningless outlines because the
* subglyphs must be scaled and positioned with hinting instructions.
* This can be solved by loading the font without FT_LOAD_NO_SCALE and
* setting the character size to `font->units_per_EM'.
*
* FT_LOAD_NO_HINTING ::
* Disable hinting. This generally generates `blurrier' bitmap glyphs
* when the glyph are rendered in any of the anti-aliased modes. See
* also the note below.
*
* This flag is implied by @FT_LOAD_NO_SCALE.
*
* FT_LOAD_RENDER ::
* Call @FT_Render_Glyph after the glyph is loaded. By default, the
* glyph is rendered in @FT_RENDER_MODE_NORMAL mode. This can be
* overridden by @FT_LOAD_TARGET_XXX or @FT_LOAD_MONOCHROME.
*
* This flag is unset by @FT_LOAD_NO_SCALE.
*
* FT_LOAD_NO_BITMAP ::
* Ignore bitmap strikes when loading. Bitmap-only fonts ignore this
* flag.
*
* @FT_LOAD_NO_SCALE always sets this flag.
*
* FT_LOAD_VERTICAL_LAYOUT ::
* Load the glyph for vertical text layout. In particular, the
* `advance' value in the @FT_GlyphSlotRec structure is set to the
* `vertAdvance' value of the `metrics' field.
*
* In case @FT_HAS_VERTICAL doesn't return true, you shouldn't use
* this flag currently. Reason is that in this case vertical metrics
* get synthesized, and those values are not always consistent across
* various font formats.
*
* FT_LOAD_FORCE_AUTOHINT ::
* Indicates that the auto-hinter is preferred over the font's native
* hinter. See also the note below.
*
* FT_LOAD_CROP_BITMAP ::
* Indicates that the font driver should crop the loaded bitmap glyph
* (i.e., remove all space around its black bits). Not all drivers
* implement this.
*
* FT_LOAD_PEDANTIC ::
* Indicates that the font driver should perform pedantic verifications
* during glyph loading. This is mostly used to detect broken glyphs
* in fonts. By default, FreeType tries to handle broken fonts also.
*
* In particular, errors from the TrueType bytecode engine are not
* passed to the application if this flag is not set; this might
* result in partially hinted or distorted glyphs in case a glyph's
* bytecode is buggy.
*
* FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ::
* Ignored. Deprecated.
*
* FT_LOAD_NO_RECURSE ::
* This flag is only used internally. It merely indicates that the
* font driver should not load composite glyphs recursively. Instead,
* it should set the `num_subglyph' and `subglyphs' values of the
* glyph slot accordingly, and set `glyph->format' to
* @FT_GLYPH_FORMAT_COMPOSITE.
*
* The description of sub-glyphs is not available to client
* applications for now.
*
* This flag implies @FT_LOAD_NO_SCALE and @FT_LOAD_IGNORE_TRANSFORM.
*
* FT_LOAD_IGNORE_TRANSFORM ::
* Indicates that the transform matrix set by @FT_Set_Transform should
* be ignored.
*
* FT_LOAD_MONOCHROME ::
* This flag is used with @FT_LOAD_RENDER to indicate that you want to
* render an outline glyph to a 1-bit monochrome bitmap glyph, with
* 8~pixels packed into each byte of the bitmap data.
*
* Note that this has no effect on the hinting algorithm used. You
* should rather use @FT_LOAD_TARGET_MONO so that the
* monochrome-optimized hinting algorithm is used.
*
* FT_LOAD_LINEAR_DESIGN ::
* Indicates that the `linearHoriAdvance' and `linearVertAdvance'
* fields of @FT_GlyphSlotRec should be kept in font units. See
* @FT_GlyphSlotRec for details.
*
* FT_LOAD_NO_AUTOHINT ::
* Disable auto-hinter. See also the note below.
*
* @note:
* By default, hinting is enabled and the font's native hinter (see
* @FT_FACE_FLAG_HINTER) is preferred over the auto-hinter. You can
* disable hinting by setting @FT_LOAD_NO_HINTING or change the
* precedence by setting @FT_LOAD_FORCE_AUTOHINT. You can also set
* @FT_LOAD_NO_AUTOHINT in case you don't want the auto-hinter to be
* used at all.
*
* See the description of @FT_FACE_FLAG_TRICKY for a special exception
* (affecting only a handful of Asian fonts).
*
* Besides deciding which hinter to use, you can also decide which
* hinting algorithm to use. See @FT_LOAD_TARGET_XXX for details.
*
* Note that the auto-hinter needs a valid Unicode cmap (either a native
* one or synthesized by FreeType) for producing correct results. If a
* font provides an incorrect mapping (for example, assigning the
* character code U+005A, LATIN CAPITAL LETTER Z, to a glyph depicting a
* mathematical integral sign), the auto-hinter might produce useless
* results.
*
*/
#define FT_LOAD_DEFAULT 0x0
#define FT_LOAD_NO_SCALE ( 1L << 0 )
#define FT_LOAD_NO_HINTING ( 1L << 1 )
#define FT_LOAD_RENDER ( 1L << 2 )
#define FT_LOAD_NO_BITMAP ( 1L << 3 )
#define FT_LOAD_VERTICAL_LAYOUT ( 1L << 4 )
#define FT_LOAD_FORCE_AUTOHINT ( 1L << 5 )
#define FT_LOAD_CROP_BITMAP ( 1L << 6 )
#define FT_LOAD_PEDANTIC ( 1L << 7 )
#define FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ( 1L << 9 )
#define FT_LOAD_NO_RECURSE ( 1L << 10 )
#define FT_LOAD_IGNORE_TRANSFORM ( 1L << 11 )
#define FT_LOAD_MONOCHROME ( 1L << 12 )
#define FT_LOAD_LINEAR_DESIGN ( 1L << 13 )
#define FT_LOAD_NO_AUTOHINT ( 1L << 15 )
/* */
/* used internally only by certain font drivers! */
#define FT_LOAD_ADVANCE_ONLY ( 1L << 8 )
#define FT_LOAD_SBITS_ONLY ( 1L << 14 )
/**************************************************************************
*
* @enum:
* FT_LOAD_TARGET_XXX
*
* @description:
* A list of values that are used to select a specific hinting algorithm
* to use by the hinter. You should OR one of these values to your
* `load_flags' when calling @FT_Load_Glyph.
*
* Note that font's native hinters may ignore the hinting algorithm you
* have specified (e.g., the TrueType bytecode interpreter). You can set
* @FT_LOAD_FORCE_AUTOHINT to ensure that the auto-hinter is used.
*
* Also note that @FT_LOAD_TARGET_LIGHT is an exception, in that it
* always implies @FT_LOAD_FORCE_AUTOHINT.
*
* @values:
* FT_LOAD_TARGET_NORMAL ::
* This corresponds to the default hinting algorithm, optimized for
* standard gray-level rendering. For monochrome output, use
* @FT_LOAD_TARGET_MONO instead.
*
* FT_LOAD_TARGET_LIGHT ::
* A lighter hinting algorithm for non-monochrome modes. Many
* generated glyphs are more fuzzy but better resemble its original
* shape. A bit like rendering on Mac OS~X.
*
* As a special exception, this target implies @FT_LOAD_FORCE_AUTOHINT.
*
* FT_LOAD_TARGET_MONO ::
* Strong hinting algorithm that should only be used for monochrome
* output. The result is probably unpleasant if the glyph is rendered
* in non-monochrome modes.
*
* FT_LOAD_TARGET_LCD ::
* A variant of @FT_LOAD_TARGET_NORMAL optimized for horizontally
* decimated LCD displays.
*
* FT_LOAD_TARGET_LCD_V ::
* A variant of @FT_LOAD_TARGET_NORMAL optimized for vertically
* decimated LCD displays.
*
* @note:
* You should use only _one_ of the FT_LOAD_TARGET_XXX values in your
* `load_flags'. They can't be ORed.
*
* If @FT_LOAD_RENDER is also set, the glyph is rendered in the
* corresponding mode (i.e., the mode which matches the used algorithm
* best). An exeption is FT_LOAD_TARGET_MONO since it implies
* @FT_LOAD_MONOCHROME.
*
* You can use a hinting algorithm that doesn't correspond to the same
* rendering mode. As an example, it is possible to use the `light'
* hinting algorithm and have the results rendered in horizontal LCD
* pixel mode, with code like
*
* {
* FT_Load_Glyph( face, glyph_index,
* load_flags | FT_LOAD_TARGET_LIGHT );
*
* FT_Render_Glyph( face->glyph, FT_RENDER_MODE_LCD );
* }
*
*/
#define FT_LOAD_TARGET_( x ) ( (FT_Int32)( (x) & 15 ) << 16 )
#define FT_LOAD_TARGET_NORMAL FT_LOAD_TARGET_( FT_RENDER_MODE_NORMAL )
#define FT_LOAD_TARGET_LIGHT FT_LOAD_TARGET_( FT_RENDER_MODE_LIGHT )
#define FT_LOAD_TARGET_MONO FT_LOAD_TARGET_( FT_RENDER_MODE_MONO )
#define FT_LOAD_TARGET_LCD FT_LOAD_TARGET_( FT_RENDER_MODE_LCD )
#define FT_LOAD_TARGET_LCD_V FT_LOAD_TARGET_( FT_RENDER_MODE_LCD_V )
/**************************************************************************
*
* @macro:
* FT_LOAD_TARGET_MODE
*
* @description:
* Return the @FT_Render_Mode corresponding to a given
* @FT_LOAD_TARGET_XXX value.
*
*/
#define FT_LOAD_TARGET_MODE( x ) ( (FT_Render_Mode)( ( (x) >> 16 ) & 15 ) )
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_Transform */
/* */
/* <Description> */
/* A function used to set the transformation that is applied to glyph */
/* images when they are loaded into a glyph slot through */
/* @FT_Load_Glyph. */
/* */
/* <InOut> */
/* face :: A handle to the source face object. */
/* */
/* <Input> */
/* matrix :: A pointer to the transformation's 2x2 matrix. Use~0 for */
/* the identity matrix. */
/* delta :: A pointer to the translation vector. Use~0 for the null */
/* vector. */
/* */
/* <Note> */
/* The transformation is only applied to scalable image formats after */
/* the glyph has been loaded. It means that hinting is unaltered by */
/* the transformation and is performed on the character size given in */
/* the last call to @FT_Set_Char_Size or @FT_Set_Pixel_Sizes. */
/* */
/* Note that this also transforms the `face.glyph.advance' field, but */
/* *not* the values in `face.glyph.metrics'. */
/* */
FT_EXPORT( void )
FT_Set_Transform( FT_Face face,
FT_Matrix* matrix,
FT_Vector* delta );
/*************************************************************************/
/* */
/* <Enum> */
/* FT_Render_Mode */
/* */
/* <Description> */
/* An enumeration type that lists the render modes supported by */
/* FreeType~2. Each mode corresponds to a specific type of scanline */
/* conversion performed on the outline. */
/* */
/* For bitmap fonts and embedded bitmaps the `bitmap->pixel_mode' */
/* field in the @FT_GlyphSlotRec structure gives the format of the */
/* returned bitmap. */
/* */
/* All modes except @FT_RENDER_MODE_MONO use 256 levels of opacity. */
/* */
/* <Values> */
/* FT_RENDER_MODE_NORMAL :: */
/* This is the default render mode; it corresponds to 8-bit */
/* anti-aliased bitmaps. */
/* */
/* FT_RENDER_MODE_LIGHT :: */
/* This is equivalent to @FT_RENDER_MODE_NORMAL. It is only */
/* defined as a separate value because render modes are also used */
/* indirectly to define hinting algorithm selectors. See */
/* @FT_LOAD_TARGET_XXX for details. */
/* */
/* FT_RENDER_MODE_MONO :: */
/* This mode corresponds to 1-bit bitmaps (with 2~levels of */
/* opacity). */
/* */
/* FT_RENDER_MODE_LCD :: */
/* This mode corresponds to horizontal RGB and BGR sub-pixel */
/* displays like LCD screens. It produces 8-bit bitmaps that are */
/* 3~times the width of the original glyph outline in pixels, and */
/* which use the @FT_PIXEL_MODE_LCD mode. */
/* */
/* FT_RENDER_MODE_LCD_V :: */
/* This mode corresponds to vertical RGB and BGR sub-pixel displays */
/* (like PDA screens, rotated LCD displays, etc.). It produces */
/* 8-bit bitmaps that are 3~times the height of the original */
/* glyph outline in pixels and use the @FT_PIXEL_MODE_LCD_V mode. */
/* */
/* <Note> */
/* The LCD-optimized glyph bitmaps produced by FT_Render_Glyph can be */
/* filtered to reduce color-fringes by using @FT_Library_SetLcdFilter */
/* (not active in the default builds). It is up to the caller to */
/* either call @FT_Library_SetLcdFilter (if available) or do the */
/* filtering itself. */
/* */
/* The selected render mode only affects vector glyphs of a font. */
/* Embedded bitmaps often have a different pixel mode like */
/* @FT_PIXEL_MODE_MONO. You can use @FT_Bitmap_Convert to transform */
/* them into 8-bit pixmaps. */
/* */
typedef enum FT_Render_Mode_
{
FT_RENDER_MODE_NORMAL = 0,
FT_RENDER_MODE_LIGHT,
FT_RENDER_MODE_MONO,
FT_RENDER_MODE_LCD,
FT_RENDER_MODE_LCD_V,
FT_RENDER_MODE_MAX
} FT_Render_Mode;
/*************************************************************************/
/* */
/* <Enum> */
/* ft_render_mode_xxx */
/* */
/* <Description> */
/* These constants are deprecated. Use the corresponding */
/* @FT_Render_Mode values instead. */
/* */
/* <Values> */
/* ft_render_mode_normal :: see @FT_RENDER_MODE_NORMAL */
/* ft_render_mode_mono :: see @FT_RENDER_MODE_MONO */
/* */
#define ft_render_mode_normal FT_RENDER_MODE_NORMAL
#define ft_render_mode_mono FT_RENDER_MODE_MONO
/*************************************************************************/
/* */
/* <Function> */
/* FT_Render_Glyph */
/* */
/* <Description> */
/* Convert a given glyph image to a bitmap. It does so by inspecting */
/* the glyph image format, finding the relevant renderer, and */
/* invoking it. */
/* */
/* <InOut> */
/* slot :: A handle to the glyph slot containing the image to */
/* convert. */
/* */
/* <Input> */
/* render_mode :: This is the render mode used to render the glyph */
/* image into a bitmap. See @FT_Render_Mode for a */
/* list of possible values. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Render_Glyph( FT_GlyphSlot slot,
FT_Render_Mode render_mode );
/*************************************************************************/
/* */
/* <Enum> */
/* FT_Kerning_Mode */
/* */
/* <Description> */
/* An enumeration used to specify which kerning values to return in */
/* @FT_Get_Kerning. */
/* */
/* <Values> */
/* FT_KERNING_DEFAULT :: Return scaled and grid-fitted kerning */
/* distances (value is~0). */
/* */
/* FT_KERNING_UNFITTED :: Return scaled but un-grid-fitted kerning */
/* distances. */
/* */
/* FT_KERNING_UNSCALED :: Return the kerning vector in original font */
/* units. */
/* */
typedef enum FT_Kerning_Mode_
{
FT_KERNING_DEFAULT = 0,
FT_KERNING_UNFITTED,
FT_KERNING_UNSCALED
} FT_Kerning_Mode;
/*************************************************************************/
/* */
/* <Const> */
/* ft_kerning_default */
/* */
/* <Description> */
/* This constant is deprecated. Please use @FT_KERNING_DEFAULT */
/* instead. */
/* */
#define ft_kerning_default FT_KERNING_DEFAULT
/*************************************************************************/
/* */
/* <Const> */
/* ft_kerning_unfitted */
/* */
/* <Description> */
/* This constant is deprecated. Please use @FT_KERNING_UNFITTED */
/* instead. */
/* */
#define ft_kerning_unfitted FT_KERNING_UNFITTED
/*************************************************************************/
/* */
/* <Const> */
/* ft_kerning_unscaled */
/* */
/* <Description> */
/* This constant is deprecated. Please use @FT_KERNING_UNSCALED */
/* instead. */
/* */
#define ft_kerning_unscaled FT_KERNING_UNSCALED
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Kerning */
/* */
/* <Description> */
/* Return the kerning vector between two glyphs of a same face. */
/* */
/* <Input> */
/* face :: A handle to a source face object. */
/* */
/* left_glyph :: The index of the left glyph in the kern pair. */
/* */
/* right_glyph :: The index of the right glyph in the kern pair. */
/* */
/* kern_mode :: See @FT_Kerning_Mode for more information. */
/* Determines the scale and dimension of the returned */
/* kerning vector. */
/* */
/* <Output> */
/* akerning :: The kerning vector. This is either in font units */
/* or in pixels (26.6 format) for scalable formats, */
/* and in pixels for fixed-sizes formats. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* Only horizontal layouts (left-to-right & right-to-left) are */
/* supported by this method. Other layouts, or more sophisticated */
/* kernings, are out of the scope of this API function -- they can be */
/* implemented through format-specific interfaces. */
/* */
FT_EXPORT( FT_Error )
FT_Get_Kerning( FT_Face face,
FT_UInt left_glyph,
FT_UInt right_glyph,
FT_UInt kern_mode,
FT_Vector *akerning );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Track_Kerning */
/* */
/* <Description> */
/* Return the track kerning for a given face object at a given size. */
/* */
/* <Input> */
/* face :: A handle to a source face object. */
/* */
/* point_size :: The point size in 16.16 fractional points. */
/* */
/* degree :: The degree of tightness. Increasingly negative */
/* values represent tighter track kerning, while */
/* increasingly positive values represent looser track */
/* kerning. Value zero means no track kerning. */
/* */
/* <Output> */
/* akerning :: The kerning in 16.16 fractional points, to be */
/* uniformly applied between all glyphs. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* Currently, only the Type~1 font driver supports track kerning, */
/* using data from AFM files (if attached with @FT_Attach_File or */
/* @FT_Attach_Stream). */
/* */
/* Only very few AFM files come with track kerning data; please refer */
/* to the Adobe's AFM specification for more details. */
/* */
FT_EXPORT( FT_Error )
FT_Get_Track_Kerning( FT_Face face,
FT_Fixed point_size,
FT_Int degree,
FT_Fixed* akerning );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Glyph_Name */
/* */
/* <Description> */
/* Retrieve the ASCII name of a given glyph in a face. This only */
/* works for those faces where @FT_HAS_GLYPH_NAMES(face) returns~1. */
/* */
/* <Input> */
/* face :: A handle to a source face object. */
/* */
/* glyph_index :: The glyph index. */
/* */
/* buffer_max :: The maximum number of bytes available in the */
/* buffer. */
/* */
/* <Output> */
/* buffer :: A pointer to a target buffer where the name is */
/* copied to. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* An error is returned if the face doesn't provide glyph names or if */
/* the glyph index is invalid. In all cases of failure, the first */
/* byte of `buffer' is set to~0 to indicate an empty name. */
/* */
/* The glyph name is truncated to fit within the buffer if it is too */
/* long. The returned string is always zero-terminated. */
/* */
/* Be aware that FreeType reorders glyph indices internally so that */
/* glyph index~0 always corresponds to the `missing glyph' (called */
/* `.notdef'). */
/* */
/* This function is not compiled within the library if the config */
/* macro `FT_CONFIG_OPTION_NO_GLYPH_NAMES' is defined in */
/* `include/freetype/config/ftoptions.h'. */
/* */
FT_EXPORT( FT_Error )
FT_Get_Glyph_Name( FT_Face face,
FT_UInt glyph_index,
FT_Pointer buffer,
FT_UInt buffer_max );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Postscript_Name */
/* */
/* <Description> */
/* Retrieve the ASCII PostScript name of a given face, if available. */
/* This only works with PostScript and TrueType fonts. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* <Return> */
/* A pointer to the face's PostScript name. NULL if unavailable. */
/* */
/* <Note> */
/* The returned pointer is owned by the face and is destroyed with */
/* it. */
/* */
FT_EXPORT( const char* )
FT_Get_Postscript_Name( FT_Face face );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Select_Charmap */
/* */
/* <Description> */
/* Select a given charmap by its encoding tag (as listed in */
/* `freetype.h'). */
/* */
/* <InOut> */
/* face :: A handle to the source face object. */
/* */
/* <Input> */
/* encoding :: A handle to the selected encoding. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* This function returns an error if no charmap in the face */
/* corresponds to the encoding queried here. */
/* */
/* Because many fonts contain more than a single cmap for Unicode */
/* encoding, this function has some special code to select the one */
/* which covers Unicode best (`best' in the sense that a UCS-4 cmap */
/* is preferred to a UCS-2 cmap). It is thus preferable to */
/* @FT_Set_Charmap in this case. */
/* */
FT_EXPORT( FT_Error )
FT_Select_Charmap( FT_Face face,
FT_Encoding encoding );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_Charmap */
/* */
/* <Description> */
/* Select a given charmap for character code to glyph index mapping. */
/* */
/* <InOut> */
/* face :: A handle to the source face object. */
/* */
/* <Input> */
/* charmap :: A handle to the selected charmap. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* This function returns an error if the charmap is not part of */
/* the face (i.e., if it is not listed in the `face->charmaps' */
/* table). */
/* */
/* It also fails if a type~14 charmap is selected. */
/* */
FT_EXPORT( FT_Error )
FT_Set_Charmap( FT_Face face,
FT_CharMap charmap );
/*************************************************************************
*
* @function:
* FT_Get_Charmap_Index
*
* @description:
* Retrieve index of a given charmap.
*
* @input:
* charmap ::
* A handle to a charmap.
*
* @return:
* The index into the array of character maps within the face to which
* `charmap' belongs. If an error occurs, -1 is returned.
*
*/
FT_EXPORT( FT_Int )
FT_Get_Charmap_Index( FT_CharMap charmap );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Char_Index */
/* */
/* <Description> */
/* Return the glyph index of a given character code. This function */
/* uses a charmap object to do the mapping. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* charcode :: The character code. */
/* */
/* <Return> */
/* The glyph index. 0~means `undefined character code'. */
/* */
/* <Note> */
/* If you use FreeType to manipulate the contents of font files */
/* directly, be aware that the glyph index returned by this function */
/* doesn't always correspond to the internal indices used within the */
/* file. This is done to ensure that value~0 always corresponds to */
/* the `missing glyph'. If the first glyph is not named `.notdef', */
/* then for Type~1 and Type~42 fonts, `.notdef' will be moved into */
/* the glyph ID~0 position, and whatever was there will be moved to */
/* the position `.notdef' had. For Type~1 fonts, if there is no */
/* `.notdef' glyph at all, then one will be created at index~0 and */
/* whatever was there will be moved to the last index -- Type~42 */
/* fonts are considered invalid under this condition. */
/* */
FT_EXPORT( FT_UInt )
FT_Get_Char_Index( FT_Face face,
FT_ULong charcode );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_First_Char */
/* */
/* <Description> */
/* This function is used to return the first character code in the */
/* current charmap of a given face. It also returns the */
/* corresponding glyph index. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* <Output> */
/* agindex :: Glyph index of first character code. 0~if charmap is */
/* empty. */
/* */
/* <Return> */
/* The charmap's first character code. */
/* */
/* <Note> */
/* You should use this function with @FT_Get_Next_Char to be able to */
/* parse all character codes available in a given charmap. The code */
/* should look like this: */
/* */
/* { */
/* FT_ULong charcode; */
/* FT_UInt gindex; */
/* */
/* */
/* charcode = FT_Get_First_Char( face, &gindex ); */
/* while ( gindex != 0 ) */
/* { */
/* ... do something with (charcode,gindex) pair ... */
/* */
/* charcode = FT_Get_Next_Char( face, charcode, &gindex ); */
/* } */
/* } */
/* */
/* Note that `*agindex' is set to~0 if the charmap is empty. The */
/* result itself can be~0 in two cases: if the charmap is empty or */
/* if the value~0 is the first valid character code. */
/* */
FT_EXPORT( FT_ULong )
FT_Get_First_Char( FT_Face face,
FT_UInt *agindex );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Next_Char */
/* */
/* <Description> */
/* This function is used to return the next character code in the */
/* current charmap of a given face following the value `char_code', */
/* as well as the corresponding glyph index. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* char_code :: The starting character code. */
/* */
/* <Output> */
/* agindex :: Glyph index of next character code. 0~if charmap */
/* is empty. */
/* */
/* <Return> */
/* The charmap's next character code. */
/* */
/* <Note> */
/* You should use this function with @FT_Get_First_Char to walk */
/* over all character codes available in a given charmap. See the */
/* note for this function for a simple code example. */
/* */
/* Note that `*agindex' is set to~0 when there are no more codes in */
/* the charmap. */
/* */
FT_EXPORT( FT_ULong )
FT_Get_Next_Char( FT_Face face,
FT_ULong char_code,
FT_UInt *agindex );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Name_Index */
/* */
/* <Description> */
/* Return the glyph index of a given glyph name. This function uses */
/* driver specific objects to do the translation. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* glyph_name :: The glyph name. */
/* */
/* <Return> */
/* The glyph index. 0~means `undefined character code'. */
/* */
FT_EXPORT( FT_UInt )
FT_Get_Name_Index( FT_Face face,
FT_String* glyph_name );
/*************************************************************************
*
* @macro:
* FT_SUBGLYPH_FLAG_XXX
*
* @description:
* A list of constants used to describe subglyphs. Please refer to the
* TrueType specification for the meaning of the various flags.
*
* @values:
* FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS ::
* FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ::
* FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID ::
* FT_SUBGLYPH_FLAG_SCALE ::
* FT_SUBGLYPH_FLAG_XY_SCALE ::
* FT_SUBGLYPH_FLAG_2X2 ::
* FT_SUBGLYPH_FLAG_USE_MY_METRICS ::
*
*/
#define FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS 1
#define FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES 2
#define FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID 4
#define FT_SUBGLYPH_FLAG_SCALE 8
#define FT_SUBGLYPH_FLAG_XY_SCALE 0x40
#define FT_SUBGLYPH_FLAG_2X2 0x80
#define FT_SUBGLYPH_FLAG_USE_MY_METRICS 0x200
/*************************************************************************
*
* @func:
* FT_Get_SubGlyph_Info
*
* @description:
* Retrieve a description of a given subglyph. Only use it if
* `glyph->format' is @FT_GLYPH_FORMAT_COMPOSITE; an error is
* returned otherwise.
*
* @input:
* glyph ::
* The source glyph slot.
*
* sub_index ::
* The index of the subglyph. Must be less than
* `glyph->num_subglyphs'.
*
* @output:
* p_index ::
* The glyph index of the subglyph.
*
* p_flags ::
* The subglyph flags, see @FT_SUBGLYPH_FLAG_XXX.
*
* p_arg1 ::
* The subglyph's first argument (if any).
*
* p_arg2 ::
* The subglyph's second argument (if any).
*
* p_transform ::
* The subglyph transformation (if any).
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* The values of `*p_arg1', `*p_arg2', and `*p_transform' must be
* interpreted depending on the flags returned in `*p_flags'. See the
* TrueType specification for details.
*
*/
FT_EXPORT( FT_Error )
FT_Get_SubGlyph_Info( FT_GlyphSlot glyph,
FT_UInt sub_index,
FT_Int *p_index,
FT_UInt *p_flags,
FT_Int *p_arg1,
FT_Int *p_arg2,
FT_Matrix *p_transform );
/*************************************************************************/
/* */
/* <Enum> */
/* FT_FSTYPE_XXX */
/* */
/* <Description> */
/* A list of bit flags used in the `fsType' field of the OS/2 table */
/* in a TrueType or OpenType font and the `FSType' entry in a */
/* PostScript font. These bit flags are returned by */
/* @FT_Get_FSType_Flags; they inform client applications of embedding */
/* and subsetting restrictions associated with a font. */
/* */
/* See http://www.adobe.com/devnet/acrobat/pdfs/FontPolicies.pdf for */
/* more details. */
/* */
/* <Values> */
/* FT_FSTYPE_INSTALLABLE_EMBEDDING :: */
/* Fonts with no fsType bit set may be embedded and permanently */
/* installed on the remote system by an application. */
/* */
/* FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING :: */
/* Fonts that have only this bit set must not be modified, embedded */
/* or exchanged in any manner without first obtaining permission of */
/* the font software copyright owner. */
/* */
/* FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING :: */
/* If this bit is set, the font may be embedded and temporarily */
/* loaded on the remote system. Documents containing Preview & */
/* Print fonts must be opened `read-only'; no edits can be applied */
/* to the document. */
/* */
/* FT_FSTYPE_EDITABLE_EMBEDDING :: */
/* If this bit is set, the font may be embedded but must only be */
/* installed temporarily on other systems. In contrast to Preview */
/* & Print fonts, documents containing editable fonts may be opened */
/* for reading, editing is permitted, and changes may be saved. */
/* */
/* FT_FSTYPE_NO_SUBSETTING :: */
/* If this bit is set, the font may not be subsetted prior to */
/* embedding. */
/* */
/* FT_FSTYPE_BITMAP_EMBEDDING_ONLY :: */
/* If this bit is set, only bitmaps contained in the font may be */
/* embedded; no outline data may be embedded. If there are no */
/* bitmaps available in the font, then the font is unembeddable. */
/* */
/* <Note> */
/* While the fsType flags can indicate that a font may be embedded, a */
/* license with the font vendor may be separately required to use the */
/* font in this way. */
/* */
#define FT_FSTYPE_INSTALLABLE_EMBEDDING 0x0000
#define FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING 0x0002
#define FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING 0x0004
#define FT_FSTYPE_EDITABLE_EMBEDDING 0x0008
#define FT_FSTYPE_NO_SUBSETTING 0x0100
#define FT_FSTYPE_BITMAP_EMBEDDING_ONLY 0x0200
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_FSType_Flags */
/* */
/* <Description> */
/* Return the fsType flags for a font. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* <Return> */
/* The fsType flags, @FT_FSTYPE_XXX. */
/* */
/* <Note> */
/* Use this function rather than directly reading the `fs_type' field */
/* in the @PS_FontInfoRec structure which is only guaranteed to */
/* return the correct results for Type~1 fonts. */
/* */
/* <Since> */
/* 2.3.8 */
/* */
FT_EXPORT( FT_UShort )
FT_Get_FSType_Flags( FT_Face face );
/*************************************************************************/
/* */
/* <Section> */
/* glyph_variants */
/* */
/* <Title> */
/* Glyph Variants */
/* */
/* <Abstract> */
/* The FreeType~2 interface to Unicode Ideographic Variation */
/* Sequences (IVS), using the SFNT cmap format~14. */
/* */
/* <Description> */
/* Many CJK characters have variant forms. They are a sort of grey */
/* area somewhere between being totally irrelevant and semantically */
/* distinct; for this reason, the Unicode consortium decided to */
/* introduce Ideographic Variation Sequences (IVS), consisting of a */
/* Unicode base character and one of 240 variant selectors */
/* (U+E0100-U+E01EF), instead of further extending the already huge */
/* code range for CJK characters. */
/* */
/* An IVS is registered and unique; for further details please refer */
/* to Unicode Technical Standard #37, the Ideographic Variation */
/* Database: */
/* */
/* http://www.unicode.org/reports/tr37/ */
/* */
/* To date (November 2012), the character with the most variants is */
/* U+9089, having 31 such IVS. */
/* */
/* Adobe and MS decided to support IVS with a new cmap subtable */
/* (format~14). It is an odd subtable because it is not a mapping of */
/* input code points to glyphs, but contains lists of all variants */
/* supported by the font. */
/* */
/* A variant may be either `default' or `non-default'. A default */
/* variant is the one you will get for that code point if you look it */
/* up in the standard Unicode cmap. A non-default variant is a */
/* different glyph. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_Face_GetCharVariantIndex */
/* */
/* <Description> */
/* Return the glyph index of a given character code as modified by */
/* the variation selector. */
/* */
/* <Input> */
/* face :: */
/* A handle to the source face object. */
/* */
/* charcode :: */
/* The character code point in Unicode. */
/* */
/* variantSelector :: */
/* The Unicode code point of the variation selector. */
/* */
/* <Return> */
/* The glyph index. 0~means either `undefined character code', or */
/* `undefined selector code', or `no variation selector cmap */
/* subtable', or `current CharMap is not Unicode'. */
/* */
/* <Note> */
/* If you use FreeType to manipulate the contents of font files */
/* directly, be aware that the glyph index returned by this function */
/* doesn't always correspond to the internal indices used within */
/* the file. This is done to ensure that value~0 always corresponds */
/* to the `missing glyph'. */
/* */
/* This function is only meaningful if */
/* a) the font has a variation selector cmap sub table, */
/* and */
/* b) the current charmap has a Unicode encoding. */
/* */
/* <Since> */
/* 2.3.6 */
/* */
FT_EXPORT( FT_UInt )
FT_Face_GetCharVariantIndex( FT_Face face,
FT_ULong charcode,
FT_ULong variantSelector );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Face_GetCharVariantIsDefault */
/* */
/* <Description> */
/* Check whether this variant of this Unicode character is the one to */
/* be found in the `cmap'. */
/* */
/* <Input> */
/* face :: */
/* A handle to the source face object. */
/* */
/* charcode :: */
/* The character codepoint in Unicode. */
/* */
/* variantSelector :: */
/* The Unicode codepoint of the variation selector. */
/* */
/* <Return> */
/* 1~if found in the standard (Unicode) cmap, 0~if found in the */
/* variation selector cmap, or -1 if it is not a variant. */
/* */
/* <Note> */
/* This function is only meaningful if the font has a variation */
/* selector cmap subtable. */
/* */
/* <Since> */
/* 2.3.6 */
/* */
FT_EXPORT( FT_Int )
FT_Face_GetCharVariantIsDefault( FT_Face face,
FT_ULong charcode,
FT_ULong variantSelector );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Face_GetVariantSelectors */
/* */
/* <Description> */
/* Return a zero-terminated list of Unicode variant selectors found */
/* in the font. */
/* */
/* <Input> */
/* face :: */
/* A handle to the source face object. */
/* */
/* <Return> */
/* A pointer to an array of selector code points, or NULL if there is */
/* no valid variant selector cmap subtable. */
/* */
/* <Note> */
/* The last item in the array is~0; the array is owned by the */
/* @FT_Face object but can be overwritten or released on the next */
/* call to a FreeType function. */
/* */
/* <Since> */
/* 2.3.6 */
/* */
FT_EXPORT( FT_UInt32* )
FT_Face_GetVariantSelectors( FT_Face face );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Face_GetVariantsOfChar */
/* */
/* <Description> */
/* Return a zero-terminated list of Unicode variant selectors found */
/* for the specified character code. */
/* */
/* <Input> */
/* face :: */
/* A handle to the source face object. */
/* */
/* charcode :: */
/* The character codepoint in Unicode. */
/* */
/* <Return> */
/* A pointer to an array of variant selector code points which are */
/* active for the given character, or NULL if the corresponding list */
/* is empty. */
/* */
/* <Note> */
/* The last item in the array is~0; the array is owned by the */
/* @FT_Face object but can be overwritten or released on the next */
/* call to a FreeType function. */
/* */
/* <Since> */
/* 2.3.6 */
/* */
FT_EXPORT( FT_UInt32* )
FT_Face_GetVariantsOfChar( FT_Face face,
FT_ULong charcode );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Face_GetCharsOfVariant */
/* */
/* <Description> */
/* Return a zero-terminated list of Unicode character codes found for */
/* the specified variant selector. */
/* */
/* <Input> */
/* face :: */
/* A handle to the source face object. */
/* */
/* variantSelector :: */
/* The variant selector code point in Unicode. */
/* */
/* <Return> */
/* A list of all the code points which are specified by this selector */
/* (both default and non-default codes are returned) or NULL if there */
/* is no valid cmap or the variant selector is invalid. */
/* */
/* <Note> */
/* The last item in the array is~0; the array is owned by the */
/* @FT_Face object but can be overwritten or released on the next */
/* call to a FreeType function. */
/* */
/* <Since> */
/* 2.3.6 */
/* */
FT_EXPORT( FT_UInt32* )
FT_Face_GetCharsOfVariant( FT_Face face,
FT_ULong variantSelector );
/*************************************************************************/
/* */
/* <Section> */
/* computations */
/* */
/* <Title> */
/* Computations */
/* */
/* <Abstract> */
/* Crunching fixed numbers and vectors. */
/* */
/* <Description> */
/* This section contains various functions used to perform */
/* computations on 16.16 fixed-float numbers or 2d vectors. */
/* */
/* <Order> */
/* FT_MulDiv */
/* FT_MulFix */
/* FT_DivFix */
/* FT_RoundFix */
/* FT_CeilFix */
/* FT_FloorFix */
/* FT_Vector_Transform */
/* FT_Matrix_Multiply */
/* FT_Matrix_Invert */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_MulDiv */
/* */
/* <Description> */
/* A very simple function used to perform the computation `(a*b)/c' */
/* with maximum accuracy (it uses a 64-bit intermediate integer */
/* whenever necessary). */
/* */
/* This function isn't necessarily as fast as some processor specific */
/* operations, but is at least completely portable. */
/* */
/* <Input> */
/* a :: The first multiplier. */
/* b :: The second multiplier. */
/* c :: The divisor. */
/* */
/* <Return> */
/* The result of `(a*b)/c'. This function never traps when trying to */
/* divide by zero; it simply returns `MaxInt' or `MinInt' depending */
/* on the signs of `a' and `b'. */
/* */
FT_EXPORT( FT_Long )
FT_MulDiv( FT_Long a,
FT_Long b,
FT_Long c );
/* */
/* The following #if 0 ... #endif is for the documentation formatter, */
/* hiding the internal `FT_MULFIX_INLINED' macro. */
#if 0
/*************************************************************************/
/* */
/* <Function> */
/* FT_MulFix */
/* */
/* <Description> */
/* A very simple function used to perform the computation */
/* `(a*b)/0x10000' with maximum accuracy. Most of the time this is */
/* used to multiply a given value by a 16.16 fixed float factor. */
/* */
/* <Input> */
/* a :: The first multiplier. */
/* b :: The second multiplier. Use a 16.16 factor here whenever */
/* possible (see note below). */
/* */
/* <Return> */
/* The result of `(a*b)/0x10000'. */
/* */
/* <Note> */
/* This function has been optimized for the case where the absolute */
/* value of `a' is less than 2048, and `b' is a 16.16 scaling factor. */
/* As this happens mainly when scaling from notional units to */
/* fractional pixels in FreeType, it resulted in noticeable speed */
/* improvements between versions 2.x and 1.x. */
/* */
/* As a conclusion, always try to place a 16.16 factor as the */
/* _second_ argument of this function; this can make a great */
/* difference. */
/* */
FT_EXPORT( FT_Long )
FT_MulFix( FT_Long a,
FT_Long b );
/* */
#endif
#ifdef FT_MULFIX_INLINED
#define FT_MulFix( a, b ) FT_MULFIX_INLINED( a, b )
#else
FT_EXPORT( FT_Long )
FT_MulFix( FT_Long a,
FT_Long b );
#endif
/*************************************************************************/
/* */
/* <Function> */
/* FT_DivFix */
/* */
/* <Description> */
/* A very simple function used to perform the computation */
/* `(a*0x10000)/b' with maximum accuracy. Most of the time, this is */
/* used to divide a given value by a 16.16 fixed float factor. */
/* */
/* <Input> */
/* a :: The first multiplier. */
/* b :: The second multiplier. Use a 16.16 factor here whenever */
/* possible (see note below). */
/* */
/* <Return> */
/* The result of `(a*0x10000)/b'. */
/* */
/* <Note> */
/* The optimization for FT_DivFix() is simple: If (a~<<~16) fits in */
/* 32~bits, then the division is computed directly. Otherwise, we */
/* use a specialized version of @FT_MulDiv. */
/* */
FT_EXPORT( FT_Long )
FT_DivFix( FT_Long a,
FT_Long b );
/*************************************************************************/
/* */
/* <Function> */
/* FT_RoundFix */
/* */
/* <Description> */
/* A very simple function used to round a 16.16 fixed number. */
/* */
/* <Input> */
/* a :: The number to be rounded. */
/* */
/* <Return> */
/* The result of `(a + 0x8000) & -0x10000'. */
/* */
FT_EXPORT( FT_Fixed )
FT_RoundFix( FT_Fixed a );
/*************************************************************************/
/* */
/* <Function> */
/* FT_CeilFix */
/* */
/* <Description> */
/* A very simple function used to compute the ceiling function of a */
/* 16.16 fixed number. */
/* */
/* <Input> */
/* a :: The number for which the ceiling function is to be computed. */
/* */
/* <Return> */
/* The result of `(a + 0x10000 - 1) & -0x10000'. */
/* */
FT_EXPORT( FT_Fixed )
FT_CeilFix( FT_Fixed a );
/*************************************************************************/
/* */
/* <Function> */
/* FT_FloorFix */
/* */
/* <Description> */
/* A very simple function used to compute the floor function of a */
/* 16.16 fixed number. */
/* */
/* <Input> */
/* a :: The number for which the floor function is to be computed. */
/* */
/* <Return> */
/* The result of `a & -0x10000'. */
/* */
FT_EXPORT( FT_Fixed )
FT_FloorFix( FT_Fixed a );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Vector_Transform */
/* */
/* <Description> */
/* Transform a single vector through a 2x2 matrix. */
/* */
/* <InOut> */
/* vector :: The target vector to transform. */
/* */
/* <Input> */
/* matrix :: A pointer to the source 2x2 matrix. */
/* */
/* <Note> */
/* The result is undefined if either `vector' or `matrix' is invalid. */
/* */
FT_EXPORT( void )
FT_Vector_Transform( FT_Vector* vec,
const FT_Matrix* matrix );
/*************************************************************************/
/* */
/* <Section> */
/* version */
/* */
/* <Title> */
/* FreeType Version */
/* */
/* <Abstract> */
/* Functions and macros related to FreeType versions. */
/* */
/* <Description> */
/* Note that those functions and macros are of limited use because */
/* even a new release of FreeType with only documentation changes */
/* increases the version number. */
/* */
/*************************************************************************/
/*************************************************************************
*
* @enum:
* FREETYPE_XXX
*
* @description:
* These three macros identify the FreeType source code version.
* Use @FT_Library_Version to access them at runtime.
*
* @values:
* FREETYPE_MAJOR :: The major version number.
* FREETYPE_MINOR :: The minor version number.
* FREETYPE_PATCH :: The patch level.
*
* @note:
* The version number of FreeType if built as a dynamic link library
* with the `libtool' package is _not_ controlled by these three
* macros.
*
*/
#define FREETYPE_MAJOR 2
#define FREETYPE_MINOR 4
#define FREETYPE_PATCH 11
/*************************************************************************/
/* */
/* <Function> */
/* FT_Library_Version */
/* */
/* <Description> */
/* Return the version of the FreeType library being used. This is */
/* useful when dynamically linking to the library, since one cannot */
/* use the macros @FREETYPE_MAJOR, @FREETYPE_MINOR, and */
/* @FREETYPE_PATCH. */
/* */
/* <Input> */
/* library :: A source library handle. */
/* */
/* <Output> */
/* amajor :: The major version number. */
/* */
/* aminor :: The minor version number. */
/* */
/* apatch :: The patch version number. */
/* */
/* <Note> */
/* The reason why this function takes a `library' argument is because */
/* certain programs implement library initialization in a custom way */
/* that doesn't use @FT_Init_FreeType. */
/* */
/* In such cases, the library version might not be available before */
/* the library object has been created. */
/* */
FT_EXPORT( void )
FT_Library_Version( FT_Library library,
FT_Int *amajor,
FT_Int *aminor,
FT_Int *apatch );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Face_CheckTrueTypePatents */
/* */
/* <Description> */
/* Parse all bytecode instructions of a TrueType font file to check */
/* whether any of the patented opcodes are used. This is only useful */
/* if you want to be able to use the unpatented hinter with */
/* fonts that do *not* use these opcodes. */
/* */
/* Note that this function parses *all* glyph instructions in the */
/* font file, which may be slow. */
/* */
/* <Input> */
/* face :: A face handle. */
/* */
/* <Return> */
/* 1~if this is a TrueType font that uses one of the patented */
/* opcodes, 0~otherwise. */
/* */
/* <Note> */
/* Since May 2010, TrueType hinting is no longer patented. */
/* */
/* <Since> */
/* 2.3.5 */
/* */
FT_EXPORT( FT_Bool )
FT_Face_CheckTrueTypePatents( FT_Face face );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Face_SetUnpatentedHinting */
/* */
/* <Description> */
/* Enable or disable the unpatented hinter for a given face. */
/* Only enable it if you have determined that the face doesn't */
/* use any patented opcodes (see @FT_Face_CheckTrueTypePatents). */
/* */
/* <Input> */
/* face :: A face handle. */
/* */
/* value :: New boolean setting. */
/* */
/* <Return> */
/* The old setting value. This will always be false if this is not */
/* an SFNT font, or if the unpatented hinter is not compiled in this */
/* instance of the library. */
/* */
/* <Note> */
/* Since May 2010, TrueType hinting is no longer patented. */
/* */
/* <Since> */
/* 2.3.5 */
/* */
FT_EXPORT( FT_Bool )
FT_Face_SetUnpatentedHinting( FT_Face face,
FT_Bool value );
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/* force the definition of FT_DEBUG_LEVEL_ERROR if FT_DEBUG_LEVEL_TRACE */
/* is already defined; this simplifies the following #ifdefs */
/* */
/*************************************************************************/
/* */
/* Define the trace enums as well as the trace levels array when they */
/* are needed. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* Define the FT_TRACE macro */
/* */
/* IMPORTANT! */
/* */
/* Each component must define the macro FT_COMPONENT to a valid FT_Trace */
/* value before using any TRACE macro. */
/* */
/*************************************************************************/
/* nothing */
#define FT_TRACE( level, varformat ) do { } while ( 0 )
/*************************************************************************/
/* */
/* <Function> */
/* FT_Trace_Get_Count */
/* */
/* <Description> */
/* Return the number of available trace components. */
/* */
/* <Return> */
/* The number of trace components. 0 if FreeType 2 is not built with */
/* FT_DEBUG_LEVEL_TRACE definition. */
/* */
/* <Note> */
/* This function may be useful if you want to access elements of */
/* the internal `ft_trace_levels' array by an index. */
/* */
FT_BASE( FT_Int )
FT_Trace_Get_Count( void );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Trace_Get_Name */
/* */
/* <Description> */
/* Return the name of a trace component. */
/* */
/* <Input> */
/* The index of the trace component. */
/* */
/* <Return> */
/* The name of the trace component. This is a statically allocated */
/* C string, so do not free it after use. NULL if FreeType 2 is not */
/* built with FT_DEBUG_LEVEL_TRACE definition. */
/* */
/* <Note> */
/* Use @FT_Trace_Get_Count to get the number of available trace */
/* components. */
/* */
/* This function may be useful if you want to control FreeType 2's */
/* debug level in your application. */
/* */
FT_BASE( const char * )
FT_Trace_Get_Name( FT_Int idx );
/*************************************************************************/
/* */
/* You need two opening and closing parentheses! */
/* */
/* Example: FT_TRACE0(( "Value is %i", foo )) */
/* */
/* Output of the FT_TRACEX macros is sent to stderr. */
/* */
/*************************************************************************/
#define FT_TRACE0( varformat ) FT_TRACE( 0, varformat )
#define FT_TRACE1( varformat ) FT_TRACE( 1, varformat )
#define FT_TRACE2( varformat ) FT_TRACE( 2, varformat )
#define FT_TRACE3( varformat ) FT_TRACE( 3, varformat )
#define FT_TRACE4( varformat ) FT_TRACE( 4, varformat )
#define FT_TRACE5( varformat ) FT_TRACE( 5, varformat )
#define FT_TRACE6( varformat ) FT_TRACE( 6, varformat )
#define FT_TRACE7( varformat ) FT_TRACE( 7, varformat )
/*************************************************************************/
/* */
/* Define the FT_ERROR macro. */
/* */
/* Output of this macro is sent to stderr. */
/* */
/*************************************************************************/
/* nothing */
#define FT_ERROR( varformat ) do { } while ( 0 )
/*************************************************************************/
/* */
/* Define the FT_ASSERT macro. */
/* */
/*************************************************************************/
#define FT_ASSERT( condition ) do { } while ( 0 )
/*************************************************************************/
/* */
/* Define `FT_Message' and `FT_Panic' when needed. */
/* */
/*************************************************************************/
FT_BASE( void )
ft_debug_init( void );
/* Visual C++ (and Intel C++) */
#if defined( _MSC_VER )
/* We disable the warning `conditional expression is constant' here */
/* in order to compile cleanly with the maximum level of warnings. */
#pragma warning( disable : 4127 )
/* _MSC_VER */
#endif
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftstream.h */
/* */
/* Stream handling (specification). */
/* */
/* Copyright 1996-2002, 2004-2006, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTSTREAM_H__
/***************************************************************************/
/* */
/* ftobjs.h */
/* */
/* The FreeType private base classes (specification). */
/* */
/* Copyright 1996-2006, 2008, 2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file contains the definition of all internal FreeType classes. */
/* */
/*************************************************************************/
#define __FTOBJS_H__
/***************************************************************************/
/* */
/* ftrender.h */
/* */
/* FreeType renderer modules public interface (specification). */
/* */
/* Copyright 1996-2001, 2005, 2006, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTRENDER_H__
/***************************************************************************/
/* */
/* ftmodapi.h */
/* */
/* FreeType modules public interface (specification). */
/* */
/* Copyright 1996-2003, 2006, 2008-2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTMODAPI_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* module_management */
/* */
/* <Title> */
/* Module Management */
/* */
/* <Abstract> */
/* How to add, upgrade, remove, and control modules from FreeType. */
/* */
/* <Description> */
/* The definitions below are used to manage modules within FreeType. */
/* Modules can be added, upgraded, and removed at runtime. */
/* Additionally, some module properties can be controlled also. */
/* */
/* Here is a list of possible values of the `module_name' field in */
/* the @FT_Module_Class structure. */
/* */
/* { */
/* autofitter */
/* bdf */
/* cff */
/* gxvalid */
/* otvalid */
/* pcf */
/* pfr */
/* psaux */
/* pshinter */
/* psnames */
/* raster1, raster5 */
/* sfnt */
/* smooth, smooth-lcd, smooth-lcdv */
/* truetype */
/* type1 */
/* type42 */
/* t1cid */
/* winfonts */
/* } */
/* */
/* Note that the FreeType Cache sub-system is not a FreeType module. */
/* */
/*************************************************************************/
/* module bit flags */
/* this module is a font driver */
#define FT_MODULE_FONT_DRIVER 1
/* this module is a renderer */
#define FT_MODULE_RENDERER 2
/* this module is a glyph hinter */
#define FT_MODULE_HINTER 4
/* this module is a styler */
#define FT_MODULE_STYLER 8
/* the driver supports */
#define FT_MODULE_DRIVER_SCALABLE 0x100
/* scalable fonts */
/* the driver does not */
#define FT_MODULE_DRIVER_NO_OUTLINES 0x200
/* support vector outlines */
/* the driver provides its */
#define FT_MODULE_DRIVER_HAS_HINTER 0x400
/* own hinter */
/* deprecated values */
#define ft_module_font_driver FT_MODULE_FONT_DRIVER
#define ft_module_renderer FT_MODULE_RENDERER
#define ft_module_hinter FT_MODULE_HINTER
#define ft_module_styler FT_MODULE_STYLER
#define ft_module_driver_scalable FT_MODULE_DRIVER_SCALABLE
#define ft_module_driver_no_outlines FT_MODULE_DRIVER_NO_OUTLINES
#define ft_module_driver_has_hinter FT_MODULE_DRIVER_HAS_HINTER
typedef FT_Pointer FT_Module_Interface;
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Module_Constructor */
/* */
/* <Description> */
/* A function used to initialize (not create) a new module object. */
/* */
/* <Input> */
/* module :: The module to initialize. */
/* */
typedef FT_Error
(*FT_Module_Constructor)( FT_Module module );
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Module_Destructor */
/* */
/* <Description> */
/* A function used to finalize (not destroy) a given module object. */
/* */
/* <Input> */
/* module :: The module to finalize. */
/* */
typedef void
(*FT_Module_Destructor)( FT_Module module );
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_Module_Requester */
/* */
/* <Description> */
/* A function used to query a given module for a specific interface. */
/* */
/* <Input> */
/* module :: The module to be searched. */
/* */
/* name :: The name of the interface in the module. */
/* */
typedef FT_Module_Interface
(*FT_Module_Requester)( FT_Module module,
const char* name );
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Module_Class */
/* */
/* <Description> */
/* The module class descriptor. */
/* */
/* <Fields> */
/* module_flags :: Bit flags describing the module. */
/* */
/* module_size :: The size of one module object/instance in */
/* bytes. */
/* */
/* module_name :: The name of the module. */
/* */
/* module_version :: The version, as a 16.16 fixed number */
/* (major.minor). */
/* */
/* module_requires :: The version of FreeType this module requires, */
/* as a 16.16 fixed number (major.minor). Starts */
/* at version 2.0, i.e., 0x20000. */
/* */
/* module_init :: The initializing function. */
/* */
/* module_done :: The finalizing function. */
/* */
/* get_interface :: The interface requesting function. */
/* */
typedef struct FT_Module_Class_
{
FT_ULong module_flags;
FT_Long module_size;
const FT_String* module_name;
FT_Fixed module_version;
FT_Fixed module_requires;
const void* module_interface;
FT_Module_Constructor module_init;
FT_Module_Destructor module_done;
FT_Module_Requester get_interface;
} FT_Module_Class;
/*************************************************************************/
/* */
/* <Function> */
/* FT_Add_Module */
/* */
/* <Description> */
/* Add a new module to a given library instance. */
/* */
/* <InOut> */
/* library :: A handle to the library object. */
/* */
/* <Input> */
/* clazz :: A pointer to class descriptor for the module. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* An error will be returned if a module already exists by that name, */
/* or if the module requires a version of FreeType that is too great. */
/* */
FT_EXPORT( FT_Error )
FT_Add_Module( FT_Library library,
const FT_Module_Class* clazz );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Module */
/* */
/* <Description> */
/* Find a module by its name. */
/* */
/* <Input> */
/* library :: A handle to the library object. */
/* */
/* module_name :: The module's name (as an ASCII string). */
/* */
/* <Return> */
/* A module handle. 0~if none was found. */
/* */
/* <Note> */
/* FreeType's internal modules aren't documented very well, and you */
/* should look up the source code for details. */
/* */
FT_EXPORT( FT_Module )
FT_Get_Module( FT_Library library,
const char* module_name );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Remove_Module */
/* */
/* <Description> */
/* Remove a given module from a library instance. */
/* */
/* <InOut> */
/* library :: A handle to a library object. */
/* */
/* <Input> */
/* module :: A handle to a module object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* The module object is destroyed by the function in case of success. */
/* */
FT_EXPORT( FT_Error )
FT_Remove_Module( FT_Library library,
FT_Module module );
/**********************************************************************
*
* @function:
* FT_Property_Set
*
* @description:
* Set a property for a given module.
*
* @input:
* library ::
* A handle to the library the module is part of.
*
* module_name ::
* The module name.
*
* property_name ::
* The property name. Properties are described in the `Synopsis'
* subsection of the module's documentation.
*
* Note that only a few modules have properties.
*
* value ::
* A generic pointer to a variable or structure which gives the new
* value of the property. The exact definition of `value' is
* dependent on the property; see the `Synopsis' subsection of the
* module's documentation.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* If `module_name' isn't a valid module name, or `property_name'
* doesn't specify a valid property, or if `value' doesn't represent a
* valid value for the given property, an error is returned.
*
* The following example sets property `bar' (a simple integer) in
* module `foo' to value~1.
*
* {
* FT_UInt bar;
*
*
* bar = 1;
* FT_Property_Set( library, "foo", "bar", &bar );
* }
*
* It is not possible to set properties of the FreeType Cache
* sub-system with FT_Property_Set; use @FTC_Property_Set instead.
*
* @since:
* 2.4.11
*
*/
FT_Error
FT_Property_Set( FT_Library library,
const FT_String* module_name,
const FT_String* property_name,
const void* value );
/**********************************************************************
*
* @function:
* FT_Property_Get
*
* @description:
* Get a module's property value.
*
* @input:
* library ::
* A handle to the library the module is part of.
*
* module_name ::
* The module name.
*
* property_name ::
* The property name. Properties are described in the `Synopsis'
* subsection of the module's documentation.
*
* @inout:
* value ::
* A generic pointer to a variable or structure which gives the
* value of the property. The exact definition of `value' is
* dependent on the property; see the `Synopsis' subsection of the
* module's documentation.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* If `module_name' isn't a valid module name, or `property_name'
* doesn't specify a valid property, or if `value' doesn't represent a
* valid value for the given property, an error is returned.
*
* The following example gets property `baz' (a range) in module `foo'.
*
* {
* typedef range_
* {
* FT_Int32 min;
* FT_Int32 max;
*
* } range;
*
* range baz;
*
*
* FT_Property_Get( library, "foo", "baz", &baz );
* }
*
* It is not possible to retrieve properties of the FreeType Cache
* sub-system with FT_Property_Get; use @FTC_Property_Get instead.
*
* @since:
* 2.4.11
*
*/
FT_Error
FT_Property_Get( FT_Library library,
const FT_String* module_name,
const FT_String* property_name,
void* value );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Reference_Library */
/* */
/* <Description> */
/* A counter gets initialized to~1 at the time an @FT_Library */
/* structure is created. This function increments the counter. */
/* @FT_Done_Library then only destroys a library if the counter is~1, */
/* otherwise it simply decrements the counter. */
/* */
/* This function helps in managing life-cycles of structures which */
/* reference @FT_Library objects. */
/* */
/* <Input> */
/* library :: A handle to a target library object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Since> */
/* 2.4.2 */
/* */
FT_EXPORT( FT_Error )
FT_Reference_Library( FT_Library library );
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Library */
/* */
/* <Description> */
/* This function is used to create a new FreeType library instance */
/* from a given memory object. It is thus possible to use libraries */
/* with distinct memory allocators within the same program. */
/* */
/* Normally, you would call this function (followed by a call to */
/* @FT_Add_Default_Modules or a series of calls to @FT_Add_Module) */
/* instead of @FT_Init_FreeType to initialize the FreeType library. */
/* */
/* Don't use @FT_Done_FreeType but @FT_Done_Library to destroy a */
/* library instance. */
/* */
/* <Input> */
/* memory :: A handle to the original memory object. */
/* */
/* <Output> */
/* alibrary :: A pointer to handle of a new library object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* See the discussion of reference counters in the description of */
/* @FT_Reference_Library. */
/* */
FT_EXPORT( FT_Error )
FT_New_Library( FT_Memory memory,
FT_Library *alibrary );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Done_Library */
/* */
/* <Description> */
/* Discard a given library object. This closes all drivers and */
/* discards all resource objects. */
/* */
/* <Input> */
/* library :: A handle to the target library. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* See the discussion of reference counters in the description of */
/* @FT_Reference_Library. */
/* */
FT_EXPORT( FT_Error )
FT_Done_Library( FT_Library library );
/* */
typedef void
(*FT_DebugHook_Func)( void* arg );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_Debug_Hook */
/* */
/* <Description> */
/* Set a debug hook function for debugging the interpreter of a font */
/* format. */
/* */
/* <InOut> */
/* library :: A handle to the library object. */
/* */
/* <Input> */
/* hook_index :: The index of the debug hook. You should use the */
/* values defined in `ftobjs.h', e.g., */
/* `FT_DEBUG_HOOK_TRUETYPE'. */
/* */
/* debug_hook :: The function used to debug the interpreter. */
/* */
/* <Note> */
/* Currently, four debug hook slots are available, but only two (for */
/* the TrueType and the Type~1 interpreter) are defined. */
/* */
/* Since the internal headers of FreeType are no longer installed, */
/* the symbol `FT_DEBUG_HOOK_TRUETYPE' isn't available publicly. */
/* This is a bug and will be fixed in a forthcoming release. */
/* */
FT_EXPORT( void )
FT_Set_Debug_Hook( FT_Library library,
FT_UInt hook_index,
FT_DebugHook_Func debug_hook );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Add_Default_Modules */
/* */
/* <Description> */
/* Add the set of default drivers to a given library object. */
/* This is only useful when you create a library object with */
/* @FT_New_Library (usually to plug a custom memory manager). */
/* */
/* <InOut> */
/* library :: A handle to a new library object. */
/* */
FT_EXPORT( void )
FT_Add_Default_Modules( FT_Library library );
/**************************************************************************
*
* @section:
* truetype_engine
*
* @title:
* The TrueType Engine
*
* @abstract:
* TrueType bytecode support.
*
* @description:
* This section contains a function used to query the level of TrueType
* bytecode support compiled in this version of the library.
*
*/
/**************************************************************************
*
* @enum:
* FT_TrueTypeEngineType
*
* @description:
* A list of values describing which kind of TrueType bytecode
* engine is implemented in a given FT_Library instance. It is used
* by the @FT_Get_TrueType_Engine_Type function.
*
* @values:
* FT_TRUETYPE_ENGINE_TYPE_NONE ::
* The library doesn't implement any kind of bytecode interpreter.
*
* FT_TRUETYPE_ENGINE_TYPE_UNPATENTED ::
* The library implements a bytecode interpreter that doesn't
* support the patented operations of the TrueType virtual machine.
*
* Its main use is to load certain Asian fonts which position and
* scale glyph components with bytecode instructions. It produces
* bad output for most other fonts.
*
* FT_TRUETYPE_ENGINE_TYPE_PATENTED ::
* The library implements a bytecode interpreter that covers
* the full instruction set of the TrueType virtual machine (this
* was governed by patents until May 2010, hence the name).
*
* @since:
* 2.2
*
*/
typedef enum FT_TrueTypeEngineType_
{
FT_TRUETYPE_ENGINE_TYPE_NONE = 0,
FT_TRUETYPE_ENGINE_TYPE_UNPATENTED,
FT_TRUETYPE_ENGINE_TYPE_PATENTED
} FT_TrueTypeEngineType;
/**************************************************************************
*
* @func:
* FT_Get_TrueType_Engine_Type
*
* @description:
* Return an @FT_TrueTypeEngineType value to indicate which level of
* the TrueType virtual machine a given library instance supports.
*
* @input:
* library ::
* A library instance.
*
* @return:
* A value indicating which level is supported.
*
* @since:
* 2.2
*
*/
FT_EXPORT( FT_TrueTypeEngineType )
FT_Get_TrueType_Engine_Type( FT_Library library );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftglyph.h */
/* */
/* FreeType convenience functions to handle glyphs (specification). */
/* */
/* Copyright 1996-2003, 2006, 2008, 2009, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file contains the definition of several convenience functions */
/* that can be used by client applications to easily retrieve glyph */
/* bitmaps and outlines from a given face. */
/* */
/* These functions should be optional if you are writing a font server */
/* or text layout engine on top of FreeType. However, they are pretty */
/* handy for many other simple uses of the library. */
/* */
/*************************************************************************/
#define __FTGLYPH_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* glyph_management */
/* */
/* <Title> */
/* Glyph Management */
/* */
/* <Abstract> */
/* Generic interface to manage individual glyph data. */
/* */
/* <Description> */
/* This section contains definitions used to manage glyph data */
/* through generic FT_Glyph objects. Each of them can contain a */
/* bitmap, a vector outline, or even images in other formats. */
/* */
/*************************************************************************/
/* forward declaration to a private type */
typedef struct FT_Glyph_Class_ FT_Glyph_Class;
/*************************************************************************/
/* */
/* <Type> */
/* FT_Glyph */
/* */
/* <Description> */
/* Handle to an object used to model generic glyph images. It is a */
/* pointer to the @FT_GlyphRec structure and can contain a glyph */
/* bitmap or pointer. */
/* */
/* <Note> */
/* Glyph objects are not owned by the library. You must thus release */
/* them manually (through @FT_Done_Glyph) _before_ calling */
/* @FT_Done_FreeType. */
/* */
typedef struct FT_GlyphRec_* FT_Glyph;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_GlyphRec */
/* */
/* <Description> */
/* The root glyph structure contains a given glyph image plus its */
/* advance width in 16.16 fixed float format. */
/* */
/* <Fields> */
/* library :: A handle to the FreeType library object. */
/* */
/* clazz :: A pointer to the glyph's class. Private. */
/* */
/* format :: The format of the glyph's image. */
/* */
/* advance :: A 16.16 vector that gives the glyph's advance width. */
/* */
typedef struct FT_GlyphRec_
{
FT_Library library;
const FT_Glyph_Class* clazz;
FT_Glyph_Format format;
FT_Vector advance;
} FT_GlyphRec;
/*************************************************************************/
/* */
/* <Type> */
/* FT_BitmapGlyph */
/* */
/* <Description> */
/* A handle to an object used to model a bitmap glyph image. This is */
/* a sub-class of @FT_Glyph, and a pointer to @FT_BitmapGlyphRec. */
/* */
typedef struct FT_BitmapGlyphRec_* FT_BitmapGlyph;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_BitmapGlyphRec */
/* */
/* <Description> */
/* A structure used for bitmap glyph images. This really is a */
/* `sub-class' of @FT_GlyphRec. */
/* */
/* <Fields> */
/* root :: The root @FT_Glyph fields. */
/* */
/* left :: The left-side bearing, i.e., the horizontal distance */
/* from the current pen position to the left border of the */
/* glyph bitmap. */
/* */
/* top :: The top-side bearing, i.e., the vertical distance from */
/* the current pen position to the top border of the glyph */
/* bitmap. This distance is positive for upwards~y! */
/* */
/* bitmap :: A descriptor for the bitmap. */
/* */
/* <Note> */
/* You can typecast an @FT_Glyph to @FT_BitmapGlyph if you have */
/* `glyph->format == FT_GLYPH_FORMAT_BITMAP'. This lets you access */
/* the bitmap's contents easily. */
/* */
/* The corresponding pixel buffer is always owned by @FT_BitmapGlyph */
/* and is thus created and destroyed with it. */
/* */
typedef struct FT_BitmapGlyphRec_
{
FT_GlyphRec root;
FT_Int left;
FT_Int top;
FT_Bitmap bitmap;
} FT_BitmapGlyphRec;
/*************************************************************************/
/* */
/* <Type> */
/* FT_OutlineGlyph */
/* */
/* <Description> */
/* A handle to an object used to model an outline glyph image. This */
/* is a sub-class of @FT_Glyph, and a pointer to @FT_OutlineGlyphRec. */
/* */
typedef struct FT_OutlineGlyphRec_* FT_OutlineGlyph;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_OutlineGlyphRec */
/* */
/* <Description> */
/* A structure used for outline (vectorial) glyph images. This */
/* really is a `sub-class' of @FT_GlyphRec. */
/* */
/* <Fields> */
/* root :: The root @FT_Glyph fields. */
/* */
/* outline :: A descriptor for the outline. */
/* */
/* <Note> */
/* You can typecast an @FT_Glyph to @FT_OutlineGlyph if you have */
/* `glyph->format == FT_GLYPH_FORMAT_OUTLINE'. This lets you access */
/* the outline's content easily. */
/* */
/* As the outline is extracted from a glyph slot, its coordinates are */
/* expressed normally in 26.6 pixels, unless the flag */
/* @FT_LOAD_NO_SCALE was used in @FT_Load_Glyph() or @FT_Load_Char(). */
/* */
/* The outline's tables are always owned by the object and are */
/* destroyed with it. */
/* */
typedef struct FT_OutlineGlyphRec_
{
FT_GlyphRec root;
FT_Outline outline;
} FT_OutlineGlyphRec;
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Glyph */
/* */
/* <Description> */
/* A function used to extract a glyph image from a slot. Note that */
/* the created @FT_Glyph object must be released with @FT_Done_Glyph. */
/* */
/* <Input> */
/* slot :: A handle to the source glyph slot. */
/* */
/* <Output> */
/* aglyph :: A handle to the glyph object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Get_Glyph( FT_GlyphSlot slot,
FT_Glyph *aglyph );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Glyph_Copy */
/* */
/* <Description> */
/* A function used to copy a glyph image. Note that the created */
/* @FT_Glyph object must be released with @FT_Done_Glyph. */
/* */
/* <Input> */
/* source :: A handle to the source glyph object. */
/* */
/* <Output> */
/* target :: A handle to the target glyph object. 0~in case of */
/* error. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Glyph_Copy( FT_Glyph source,
FT_Glyph *target );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Glyph_Transform */
/* */
/* <Description> */
/* Transform a glyph image if its format is scalable. */
/* */
/* <InOut> */
/* glyph :: A handle to the target glyph object. */
/* */
/* <Input> */
/* matrix :: A pointer to a 2x2 matrix to apply. */
/* */
/* delta :: A pointer to a 2d vector to apply. Coordinates are */
/* expressed in 1/64th of a pixel. */
/* */
/* <Return> */
/* FreeType error code (if not 0, the glyph format is not scalable). */
/* */
/* <Note> */
/* The 2x2 transformation matrix is also applied to the glyph's */
/* advance vector. */
/* */
FT_EXPORT( FT_Error )
FT_Glyph_Transform( FT_Glyph glyph,
FT_Matrix* matrix,
FT_Vector* delta );
/*************************************************************************/
/* */
/* <Enum> */
/* FT_Glyph_BBox_Mode */
/* */
/* <Description> */
/* The mode how the values of @FT_Glyph_Get_CBox are returned. */
/* */
/* <Values> */
/* FT_GLYPH_BBOX_UNSCALED :: */
/* Return unscaled font units. */
/* */
/* FT_GLYPH_BBOX_SUBPIXELS :: */
/* Return unfitted 26.6 coordinates. */
/* */
/* FT_GLYPH_BBOX_GRIDFIT :: */
/* Return grid-fitted 26.6 coordinates. */
/* */
/* FT_GLYPH_BBOX_TRUNCATE :: */
/* Return coordinates in integer pixels. */
/* */
/* FT_GLYPH_BBOX_PIXELS :: */
/* Return grid-fitted pixel coordinates. */
/* */
typedef enum FT_Glyph_BBox_Mode_
{
FT_GLYPH_BBOX_UNSCALED = 0,
FT_GLYPH_BBOX_SUBPIXELS = 0,
FT_GLYPH_BBOX_GRIDFIT = 1,
FT_GLYPH_BBOX_TRUNCATE = 2,
FT_GLYPH_BBOX_PIXELS = 3
} FT_Glyph_BBox_Mode;
/*************************************************************************/
/* */
/* <Enum> */
/* ft_glyph_bbox_xxx */
/* */
/* <Description> */
/* These constants are deprecated. Use the corresponding */
/* @FT_Glyph_BBox_Mode values instead. */
/* */
/* <Values> */
/* ft_glyph_bbox_unscaled :: See @FT_GLYPH_BBOX_UNSCALED. */
/* ft_glyph_bbox_subpixels :: See @FT_GLYPH_BBOX_SUBPIXELS. */
/* ft_glyph_bbox_gridfit :: See @FT_GLYPH_BBOX_GRIDFIT. */
/* ft_glyph_bbox_truncate :: See @FT_GLYPH_BBOX_TRUNCATE. */
/* ft_glyph_bbox_pixels :: See @FT_GLYPH_BBOX_PIXELS. */
/* */
#define ft_glyph_bbox_unscaled FT_GLYPH_BBOX_UNSCALED
#define ft_glyph_bbox_subpixels FT_GLYPH_BBOX_SUBPIXELS
#define ft_glyph_bbox_gridfit FT_GLYPH_BBOX_GRIDFIT
#define ft_glyph_bbox_truncate FT_GLYPH_BBOX_TRUNCATE
#define ft_glyph_bbox_pixels FT_GLYPH_BBOX_PIXELS
/*************************************************************************/
/* */
/* <Function> */
/* FT_Glyph_Get_CBox */
/* */
/* <Description> */
/* Return a glyph's `control box'. The control box encloses all the */
/* outline's points, including Bézier control points. Though it */
/* coincides with the exact bounding box for most glyphs, it can be */
/* slightly larger in some situations (like when rotating an outline */
/* which contains Bézier outside arcs). */
/* */
/* Computing the control box is very fast, while getting the bounding */
/* box can take much more time as it needs to walk over all segments */
/* and arcs in the outline. To get the latter, you can use the */
/* `ftbbox' component which is dedicated to this single task. */
/* */
/* <Input> */
/* glyph :: A handle to the source glyph object. */
/* */
/* mode :: The mode which indicates how to interpret the returned */
/* bounding box values. */
/* */
/* <Output> */
/* acbox :: The glyph coordinate bounding box. Coordinates are */
/* expressed in 1/64th of pixels if it is grid-fitted. */
/* */
/* <Note> */
/* Coordinates are relative to the glyph origin, using the y~upwards */
/* convention. */
/* */
/* If the glyph has been loaded with @FT_LOAD_NO_SCALE, `bbox_mode' */
/* must be set to @FT_GLYPH_BBOX_UNSCALED to get unscaled font */
/* units in 26.6 pixel format. The value @FT_GLYPH_BBOX_SUBPIXELS */
/* is another name for this constant. */
/* */
/* If the font is tricky and the glyph has been loaded with */
/* @FT_LOAD_NO_SCALE, the resulting CBox is meaningless. To get */
/* reasonable values for the CBox it is necessary to load the glyph */
/* at a large ppem value (so that the hinting instructions can */
/* properly shift and scale the subglyphs), then extracting the CBox */
/* which can be eventually converted back to font units. */
/* */
/* Note that the maximum coordinates are exclusive, which means that */
/* one can compute the width and height of the glyph image (be it in */
/* integer or 26.6 pixels) as: */
/* */
/* { */
/* width = bbox.xMax - bbox.xMin; */
/* height = bbox.yMax - bbox.yMin; */
/* } */
/* */
/* Note also that for 26.6 coordinates, if `bbox_mode' is set to */
/* @FT_GLYPH_BBOX_GRIDFIT, the coordinates will also be grid-fitted, */
/* which corresponds to: */
/* */
/* { */
/* bbox.xMin = FLOOR(bbox.xMin); */
/* bbox.yMin = FLOOR(bbox.yMin); */
/* bbox.xMax = CEILING(bbox.xMax); */
/* bbox.yMax = CEILING(bbox.yMax); */
/* } */
/* */
/* To get the bbox in pixel coordinates, set `bbox_mode' to */
/* @FT_GLYPH_BBOX_TRUNCATE. */
/* */
/* To get the bbox in grid-fitted pixel coordinates, set `bbox_mode' */
/* to @FT_GLYPH_BBOX_PIXELS. */
/* */
FT_EXPORT( void )
FT_Glyph_Get_CBox( FT_Glyph glyph,
FT_UInt bbox_mode,
FT_BBox *acbox );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Glyph_To_Bitmap */
/* */
/* <Description> */
/* Convert a given glyph object to a bitmap glyph object. */
/* */
/* <InOut> */
/* the_glyph :: A pointer to a handle to the target glyph. */
/* */
/* <Input> */
/* render_mode :: An enumeration that describes how the data is */
/* rendered. */
/* */
/* origin :: A pointer to a vector used to translate the glyph */
/* image before rendering. Can be~0 (if no */
/* translation). The origin is expressed in */
/* 26.6 pixels. */
/* */
/* destroy :: A boolean that indicates that the original glyph */
/* image should be destroyed by this function. It is */
/* never destroyed in case of error. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* This function does nothing if the glyph format isn't scalable. */
/* */
/* The glyph image is translated with the `origin' vector before */
/* rendering. */
/* */
/* The first parameter is a pointer to an @FT_Glyph handle, that will */
/* be _replaced_ by this function (with newly allocated data). */
/* Typically, you would use (omitting error handling): */
/* */
/* */
/* { */
/* FT_Glyph glyph; */
/* FT_BitmapGlyph glyph_bitmap; */
/* */
/* */
/* // load glyph */
/* error = FT_Load_Char( face, glyph_index, FT_LOAD_DEFAUT ); */
/* */
/* // extract glyph image */
/* error = FT_Get_Glyph( face->glyph, &glyph ); */
/* */
/* // convert to a bitmap (default render mode + destroying old) */
/* if ( glyph->format != FT_GLYPH_FORMAT_BITMAP ) */
/* { */
/* error = FT_Glyph_To_Bitmap( &glyph, FT_RENDER_MODE_NORMAL, */
/* 0, 1 ); */
/* if ( error ) // `glyph' unchanged */
/* ... */
/* } */
/* */
/* // access bitmap content by typecasting */
/* glyph_bitmap = (FT_BitmapGlyph)glyph; */
/* */
/* // do funny stuff with it, like blitting/drawing */
/* ... */
/* */
/* // discard glyph image (bitmap or not) */
/* FT_Done_Glyph( glyph ); */
/* } */
/* */
/* */
/* Here another example, again without error handling: */
/* */
/* */
/* { */
/* FT_Glyph glyphs[MAX_GLYPHS] */
/* */
/* */
/* ... */
/* */
/* for ( idx = 0; i < MAX_GLYPHS; i++ ) */
/* error = FT_Load_Glyph( face, idx, FT_LOAD_DEFAULT ) || */
/* FT_Get_Glyph ( face->glyph, &glyph[idx] ); */
/* */
/* ... */
/* */
/* for ( idx = 0; i < MAX_GLYPHS; i++ ) */
/* { */
/* FT_Glyph bitmap = glyphs[idx]; */
/* */
/* */
/* ... */
/* */
/* // after this call, `bitmap' no longer points into */
/* // the `glyphs' array (and the old value isn't destroyed) */
/* FT_Glyph_To_Bitmap( &bitmap, FT_RENDER_MODE_MONO, 0, 0 ); */
/* */
/* ... */
/* */
/* FT_Done_Glyph( bitmap ); */
/* } */
/* */
/* ... */
/* */
/* for ( idx = 0; i < MAX_GLYPHS; i++ ) */
/* FT_Done_Glyph( glyphs[idx] ); */
/* } */
/* */
FT_EXPORT( FT_Error )
FT_Glyph_To_Bitmap( FT_Glyph* the_glyph,
FT_Render_Mode render_mode,
FT_Vector* origin,
FT_Bool destroy );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Done_Glyph */
/* */
/* <Description> */
/* Destroy a given glyph. */
/* */
/* <Input> */
/* glyph :: A handle to the target glyph object. */
/* */
FT_EXPORT( void )
FT_Done_Glyph( FT_Glyph glyph );
/* */
/* other helpful functions */
/*************************************************************************/
/* */
/* <Section> */
/* computations */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_Matrix_Multiply */
/* */
/* <Description> */
/* Perform the matrix operation `b = a*b'. */
/* */
/* <Input> */
/* a :: A pointer to matrix `a'. */
/* */
/* <InOut> */
/* b :: A pointer to matrix `b'. */
/* */
/* <Note> */
/* The result is undefined if either `a' or `b' is zero. */
/* */
FT_EXPORT( void )
FT_Matrix_Multiply( const FT_Matrix* a,
FT_Matrix* b );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Matrix_Invert */
/* */
/* <Description> */
/* Invert a 2x2 matrix. Return an error if it can't be inverted. */
/* */
/* <InOut> */
/* matrix :: A pointer to the target matrix. Remains untouched in */
/* case of error. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Matrix_Invert( FT_Matrix* matrix );
/* */
FT_END_HEADER
/* END */
/* Local Variables: */
/* coding: utf-8 */
/* End: */
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* module_management */
/* */
/*************************************************************************/
/* create a new glyph object */
typedef FT_Error
(*FT_Glyph_InitFunc)( FT_Glyph glyph,
FT_GlyphSlot slot );
/* destroys a given glyph object */
typedef void
(*FT_Glyph_DoneFunc)( FT_Glyph glyph );
typedef void
(*FT_Glyph_TransformFunc)( FT_Glyph glyph,
const FT_Matrix* matrix,
const FT_Vector* delta );
typedef void
(*FT_Glyph_GetBBoxFunc)( FT_Glyph glyph,
FT_BBox* abbox );
typedef FT_Error
(*FT_Glyph_CopyFunc)( FT_Glyph source,
FT_Glyph target );
typedef FT_Error
(*FT_Glyph_PrepareFunc)( FT_Glyph glyph,
FT_GlyphSlot slot );
/* deprecated */
#define FT_Glyph_Init_Func FT_Glyph_InitFunc
#define FT_Glyph_Done_Func FT_Glyph_DoneFunc
#define FT_Glyph_Transform_Func FT_Glyph_TransformFunc
#define FT_Glyph_BBox_Func FT_Glyph_GetBBoxFunc
#define FT_Glyph_Copy_Func FT_Glyph_CopyFunc
#define FT_Glyph_Prepare_Func FT_Glyph_PrepareFunc
struct FT_Glyph_Class_
{
FT_Long glyph_size;
FT_Glyph_Format glyph_format;
FT_Glyph_InitFunc glyph_init;
FT_Glyph_DoneFunc glyph_done;
FT_Glyph_CopyFunc glyph_copy;
FT_Glyph_TransformFunc glyph_transform;
FT_Glyph_GetBBoxFunc glyph_bbox;
FT_Glyph_PrepareFunc glyph_prepare;
};
typedef FT_Error
(*FT_Renderer_RenderFunc)( FT_Renderer renderer,
FT_GlyphSlot slot,
FT_UInt mode,
const FT_Vector* origin );
typedef FT_Error
(*FT_Renderer_TransformFunc)( FT_Renderer renderer,
FT_GlyphSlot slot,
const FT_Matrix* matrix,
const FT_Vector* delta );
typedef void
(*FT_Renderer_GetCBoxFunc)( FT_Renderer renderer,
FT_GlyphSlot slot,
FT_BBox* cbox );
typedef FT_Error
(*FT_Renderer_SetModeFunc)( FT_Renderer renderer,
FT_ULong mode_tag,
FT_Pointer mode_ptr );
/* deprecated identifiers */
#define FTRenderer_render FT_Renderer_RenderFunc
#define FTRenderer_transform FT_Renderer_TransformFunc
#define FTRenderer_getCBox FT_Renderer_GetCBoxFunc
#define FTRenderer_setMode FT_Renderer_SetModeFunc
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Renderer_Class */
/* */
/* <Description> */
/* The renderer module class descriptor. */
/* */
/* <Fields> */
/* root :: The root @FT_Module_Class fields. */
/* */
/* glyph_format :: The glyph image format this renderer handles. */
/* */
/* render_glyph :: A method used to render the image that is in a */
/* given glyph slot into a bitmap. */
/* */
/* transform_glyph :: A method used to transform the image that is in */
/* a given glyph slot. */
/* */
/* get_glyph_cbox :: A method used to access the glyph's cbox. */
/* */
/* set_mode :: A method used to pass additional parameters. */
/* */
/* raster_class :: For @FT_GLYPH_FORMAT_OUTLINE renderers only. */
/* This is a pointer to its raster's class. */
/* */
typedef struct FT_Renderer_Class_
{
FT_Module_Class root;
FT_Glyph_Format glyph_format;
FT_Renderer_RenderFunc render_glyph;
FT_Renderer_TransformFunc transform_glyph;
FT_Renderer_GetCBoxFunc get_glyph_cbox;
FT_Renderer_SetModeFunc set_mode;
FT_Raster_Funcs* raster_class;
} FT_Renderer_Class;
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Renderer */
/* */
/* <Description> */
/* Retrieve the current renderer for a given glyph format. */
/* */
/* <Input> */
/* library :: A handle to the library object. */
/* */
/* format :: The glyph format. */
/* */
/* <Return> */
/* A renderer handle. 0~if none found. */
/* */
/* <Note> */
/* An error will be returned if a module already exists by that name, */
/* or if the module requires a version of FreeType that is too great. */
/* */
/* To add a new renderer, simply use @FT_Add_Module. To retrieve a */
/* renderer by its name, use @FT_Get_Module. */
/* */
FT_EXPORT( FT_Renderer )
FT_Get_Renderer( FT_Library library,
FT_Glyph_Format format );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_Renderer */
/* */
/* <Description> */
/* Set the current renderer to use, and set additional mode. */
/* */
/* <InOut> */
/* library :: A handle to the library object. */
/* */
/* <Input> */
/* renderer :: A handle to the renderer object. */
/* */
/* num_params :: The number of additional parameters. */
/* */
/* parameters :: Additional parameters. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* In case of success, the renderer will be used to convert glyph */
/* images in the renderer's known format into bitmaps. */
/* */
/* This doesn't change the current renderer for other formats. */
/* */
/* Currently, only the B/W renderer, if compiled with */
/* FT_RASTER_OPTION_ANTI_ALIASING (providing a 5-levels */
/* anti-aliasing mode; this option must be set directly in */
/* `ftraster.c' and is undefined by default) accepts a single tag */
/* `pal5' to set its gray palette as a character string with */
/* 5~elements. Consequently, the third and fourth argument are zero */
/* normally. */
/* */
FT_EXPORT( FT_Error )
FT_Set_Renderer( FT_Library library,
FT_Renderer renderer,
FT_UInt num_params,
FT_Parameter* parameters );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftsizes.h */
/* */
/* FreeType size objects management (specification). */
/* */
/* Copyright 1996-2001, 2003, 2004, 2006, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* Typical application would normally not need to use these functions. */
/* However, they have been placed in a public API for the rare cases */
/* where they are needed. */
/* */
/*************************************************************************/
#define __FTSIZES_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* sizes_management */
/* */
/* <Title> */
/* Size Management */
/* */
/* <Abstract> */
/* Managing multiple sizes per face. */
/* */
/* <Description> */
/* When creating a new face object (e.g., with @FT_New_Face), an */
/* @FT_Size object is automatically created and used to store all */
/* pixel-size dependent information, available in the `face->size' */
/* field. */
/* */
/* It is however possible to create more sizes for a given face, */
/* mostly in order to manage several character pixel sizes of the */
/* same font family and style. See @FT_New_Size and @FT_Done_Size. */
/* */
/* Note that @FT_Set_Pixel_Sizes and @FT_Set_Char_Size only */
/* modify the contents of the current `active' size; you thus need */
/* to use @FT_Activate_Size to change it. */
/* */
/* 99% of applications won't need the functions provided here, */
/* especially if they use the caching sub-system, so be cautious */
/* when using these. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Size */
/* */
/* <Description> */
/* Create a new size object from a given face object. */
/* */
/* <Input> */
/* face :: A handle to a parent face object. */
/* */
/* <Output> */
/* asize :: A handle to a new size object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* You need to call @FT_Activate_Size in order to select the new size */
/* for upcoming calls to @FT_Set_Pixel_Sizes, @FT_Set_Char_Size, */
/* @FT_Load_Glyph, @FT_Load_Char, etc. */
/* */
FT_EXPORT( FT_Error )
FT_New_Size( FT_Face face,
FT_Size* size );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Done_Size */
/* */
/* <Description> */
/* Discard a given size object. Note that @FT_Done_Face */
/* automatically discards all size objects allocated with */
/* @FT_New_Size. */
/* */
/* <Input> */
/* size :: A handle to a target size object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Done_Size( FT_Size size );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Activate_Size */
/* */
/* <Description> */
/* Even though it is possible to create several size objects for a */
/* given face (see @FT_New_Size for details), functions like */
/* @FT_Load_Glyph or @FT_Load_Char only use the one which has been */
/* activated last to determine the `current character pixel size'. */
/* */
/* This function can be used to `activate' a previously created size */
/* object. */
/* */
/* <Input> */
/* size :: A handle to a target size object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* If `face' is the size's parent face object, this function changes */
/* the value of `face->size' to the input size handle. */
/* */
FT_EXPORT( FT_Error )
FT_Activate_Size( FT_Size size );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftlcdfil.h */
/* */
/* FreeType API for color filtering of subpixel bitmap glyphs */
/* (specification). */
/* */
/* Copyright 2006, 2007, 2008, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef __FT_LCD_FILTER_H__
#define __FT_LCD_FILTER_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/***************************************************************************
*
* @section:
* lcd_filtering
*
* @title:
* LCD Filtering
*
* @abstract:
* Reduce color fringes of LCD-optimized bitmaps.
*
* @description:
* The @FT_Library_SetLcdFilter API can be used to specify a low-pass
* filter which is then applied to LCD-optimized bitmaps generated
* through @FT_Render_Glyph. This is useful to reduce color fringes
* which would occur with unfiltered rendering.
*
* Note that no filter is active by default, and that this function is
* *not* implemented in default builds of the library. You need to
* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING in your `ftoption.h' file
* in order to activate it.
*/
/****************************************************************************
*
* @enum:
* FT_LcdFilter
*
* @description:
* A list of values to identify various types of LCD filters.
*
* @values:
* FT_LCD_FILTER_NONE ::
* Do not perform filtering. When used with subpixel rendering, this
* results in sometimes severe color fringes.
*
* FT_LCD_FILTER_DEFAULT ::
* The default filter reduces color fringes considerably, at the cost
* of a slight blurriness in the output.
*
* FT_LCD_FILTER_LIGHT ::
* The light filter is a variant that produces less blurriness at the
* cost of slightly more color fringes than the default one. It might
* be better, depending on taste, your monitor, or your personal vision.
*
* FT_LCD_FILTER_LEGACY ::
* This filter corresponds to the original libXft color filter. It
* provides high contrast output but can exhibit really bad color
* fringes if glyphs are not extremely well hinted to the pixel grid.
* In other words, it only works well if the TrueType bytecode
* interpreter is enabled *and* high-quality hinted fonts are used.
*
* This filter is only provided for comparison purposes, and might be
* disabled or stay unsupported in the future.
*
* @since:
* 2.3.0
*/
typedef enum FT_LcdFilter_
{
FT_LCD_FILTER_NONE = 0,
FT_LCD_FILTER_DEFAULT = 1,
FT_LCD_FILTER_LIGHT = 2,
FT_LCD_FILTER_LEGACY = 16,
/* do not remove */
FT_LCD_FILTER_MAX
} FT_LcdFilter;
/**************************************************************************
*
* @func:
* FT_Library_SetLcdFilter
*
* @description:
* This function is used to apply color filtering to LCD decimated
* bitmaps, like the ones used when calling @FT_Render_Glyph with
* @FT_RENDER_MODE_LCD or @FT_RENDER_MODE_LCD_V.
*
* @input:
* library ::
* A handle to the target library instance.
*
* filter ::
* The filter type.
*
* You can use @FT_LCD_FILTER_NONE here to disable this feature, or
* @FT_LCD_FILTER_DEFAULT to use a default filter that should work
* well on most LCD screens.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This feature is always disabled by default. Clients must make an
* explicit call to this function with a `filter' value other than
* @FT_LCD_FILTER_NONE in order to enable it.
*
* Due to *PATENTS* covering subpixel rendering, this function doesn't
* do anything except returning `FT_Err_Unimplemented_Feature' if the
* configuration macro FT_CONFIG_OPTION_SUBPIXEL_RENDERING is not
* defined in your build of the library, which should correspond to all
* default builds of FreeType.
*
* The filter affects glyph bitmaps rendered through @FT_Render_Glyph,
* @FT_Outline_Get_Bitmap, @FT_Load_Glyph, and @FT_Load_Char.
*
* It does _not_ affect the output of @FT_Outline_Render and
* @FT_Outline_Get_Bitmap.
*
* If this feature is activated, the dimensions of LCD glyph bitmaps are
* either larger or taller than the dimensions of the corresponding
* outline with regards to the pixel grid. For example, for
* @FT_RENDER_MODE_LCD, the filter adds up to 3~pixels to the left, and
* up to 3~pixels to the right.
*
* The bitmap offset values are adjusted correctly, so clients shouldn't
* need to modify their layout and glyph positioning code when enabling
* the filter.
*
* @since:
* 2.3.0
*/
FT_EXPORT( FT_Error )
FT_Library_SetLcdFilter( FT_Library library,
FT_LcdFilter filter );
/**************************************************************************
*
* @func:
* FT_Library_SetLcdFilterWeights
*
* @description:
* Use this function to override the filter weights selected by
* @FT_Library_SetLcdFilter. By default, FreeType uses the quintuple
* (0x00, 0x55, 0x56, 0x55, 0x00) for FT_LCD_FILTER_LIGHT, and (0x10,
* 0x40, 0x70, 0x40, 0x10) for FT_LCD_FILTER_DEFAULT and
* FT_LCD_FILTER_LEGACY.
*
* @input:
* library ::
* A handle to the target library instance.
*
* weights ::
* A pointer to an array; the function copies the first five bytes and
* uses them to specify the filter weights.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* Due to *PATENTS* covering subpixel rendering, this function doesn't
* do anything except returning `FT_Err_Unimplemented_Feature' if the
* configuration macro FT_CONFIG_OPTION_SUBPIXEL_RENDERING is not
* defined in your build of the library, which should correspond to all
* default builds of FreeType.
*
* This function must be called after @FT_Library_SetLcdFilter to have
* any effect.
*
* @since:
* 2.4.0
*/
FT_EXPORT( FT_Error )
FT_Library_SetLcdFilterWeights( FT_Library library,
unsigned char *weights );
/* */
FT_END_HEADER
/* __FT_LCD_FILTER_H__ */
#endif
/* END */
/***************************************************************************/
/* */
/* ftmemory.h */
/* */
/* The FreeType memory management macros (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2005, 2006, 2007, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTMEMORY_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Macro> */
/* FT_SET_ERROR */
/* */
/* <Description> */
/* This macro is used to set an implicit `error' variable to a given */
/* expression's value (usually a function call), and convert it to a */
/* boolean which is set whenever the value is != 0. */
/* */
#undef FT_SET_ERROR
#define FT_SET_ERROR( expression ) \
( ( error = (expression) ) != 0 )
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** M E M O R Y ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*
* C++ refuses to handle statements like p = (void*)anything, with `p' a
* typed pointer. Since we don't have a `typeof' operator in standard
* C++, we have to use a template to emulate it.
*/
#ifdef __cplusplus
extern "C++"
template <typename T> inline T*
cplusplus_typeof( T*,
void *v )
{
return static_cast <T*> ( v );
}
#define FT_ASSIGNP( p, val ) (p) = cplusplus_typeof( (p), (val) )
#else
#define FT_ASSIGNP( p, val ) (p) = (val)
#endif
#define FT_DEBUG_INNER( exp ) (exp)
#define FT_ASSIGNP_INNER( p, exp ) FT_ASSIGNP( p, exp )
/*
* The allocation functions return a pointer, and the error code
* is written to through the `p_error' parameter. See below for
* for documentation.
*/
FT_BASE( FT_Pointer )
ft_mem_alloc( FT_Memory memory,
FT_Long size,
FT_Error *p_error );
FT_BASE( FT_Pointer )
ft_mem_qalloc( FT_Memory memory,
FT_Long size,
FT_Error *p_error );
FT_BASE( FT_Pointer )
ft_mem_realloc( FT_Memory memory,
FT_Long item_size,
FT_Long cur_count,
FT_Long new_count,
void* block,
FT_Error *p_error );
FT_BASE( FT_Pointer )
ft_mem_qrealloc( FT_Memory memory,
FT_Long item_size,
FT_Long cur_count,
FT_Long new_count,
void* block,
FT_Error *p_error );
FT_BASE( void )
ft_mem_free( FT_Memory memory,
const void* P );
#define FT_MEM_ALLOC( ptr, size ) \
FT_ASSIGNP_INNER( ptr, ft_mem_alloc( memory, (size), &error ) )
#define FT_MEM_FREE( ptr ) \
FT_BEGIN_STMNT \
ft_mem_free( memory, (ptr) ); \
(ptr) = NULL; \
FT_END_STMNT
#define FT_MEM_NEW( ptr ) \
FT_MEM_ALLOC( ptr, sizeof ( *(ptr) ) )
#define FT_MEM_REALLOC( ptr, cursz, newsz ) \
FT_ASSIGNP_INNER( ptr, ft_mem_realloc( memory, 1, \
(cursz), (newsz), \
(ptr), &error ) )
#define FT_MEM_QALLOC( ptr, size ) \
FT_ASSIGNP_INNER( ptr, ft_mem_qalloc( memory, (size), &error ) )
#define FT_MEM_QNEW( ptr ) \
FT_MEM_QALLOC( ptr, sizeof ( *(ptr) ) )
#define FT_MEM_QREALLOC( ptr, cursz, newsz ) \
FT_ASSIGNP_INNER( ptr, ft_mem_qrealloc( memory, 1, \
(cursz), (newsz), \
(ptr), &error ) )
#define FT_MEM_QRENEW_ARRAY( ptr, cursz, newsz ) \
FT_ASSIGNP_INNER( ptr, ft_mem_qrealloc( memory, sizeof ( *(ptr) ), \
(cursz), (newsz), \
(ptr), &error ) )
#define FT_MEM_ALLOC_MULT( ptr, count, item_size ) \
FT_ASSIGNP_INNER( ptr, ft_mem_realloc( memory, (item_size), \
0, (count), \
NULL, &error ) )
#define FT_MEM_REALLOC_MULT( ptr, oldcnt, newcnt, itmsz ) \
FT_ASSIGNP_INNER( ptr, ft_mem_realloc( memory, (itmsz), \
(oldcnt), (newcnt), \
(ptr), &error ) )
#define FT_MEM_QALLOC_MULT( ptr, count, item_size ) \
FT_ASSIGNP_INNER( ptr, ft_mem_qrealloc( memory, (item_size), \
0, (count), \
NULL, &error ) )
#define FT_MEM_QREALLOC_MULT( ptr, oldcnt, newcnt, itmsz) \
FT_ASSIGNP_INNER( ptr, ft_mem_qrealloc( memory, (itmsz), \
(oldcnt), (newcnt), \
(ptr), &error ) )
#define FT_MEM_SET_ERROR( cond ) ( (cond), error != 0 )
#define FT_MEM_SET( dest, byte, count ) ft_memset( dest, byte, count )
#define FT_MEM_COPY( dest, source, count ) ft_memcpy( dest, source, count )
#define FT_MEM_MOVE( dest, source, count ) ft_memmove( dest, source, count )
#define FT_MEM_ZERO( dest, count ) FT_MEM_SET( dest, 0, count )
#define FT_ZERO( p ) FT_MEM_ZERO( p, sizeof ( *(p) ) )
#define FT_ARRAY_ZERO( dest, count ) \
FT_MEM_ZERO( dest, (count) * sizeof ( *(dest) ) )
#define FT_ARRAY_COPY( dest, source, count ) \
FT_MEM_COPY( dest, source, (count) * sizeof ( *(dest) ) )
#define FT_ARRAY_MOVE( dest, source, count ) \
FT_MEM_MOVE( dest, source, (count) * sizeof ( *(dest) ) )
/*
* Return the maximum number of addressable elements in an array.
* We limit ourselves to INT_MAX, rather than UINT_MAX, to avoid
* any problems.
*/
#define FT_ARRAY_MAX( ptr ) ( FT_INT_MAX / sizeof ( *(ptr) ) )
#define FT_ARRAY_CHECK( ptr, count ) ( (count) <= FT_ARRAY_MAX( ptr ) )
/*************************************************************************/
/* */
/* The following functions macros expect that their pointer argument is */
/* _typed_ in order to automatically compute array element sizes. */
/* */
#define FT_MEM_NEW_ARRAY( ptr, count ) \
FT_ASSIGNP_INNER( ptr, ft_mem_realloc( memory, sizeof ( *(ptr) ), \
0, (count), \
NULL, &error ) )
#define FT_MEM_RENEW_ARRAY( ptr, cursz, newsz ) \
FT_ASSIGNP_INNER( ptr, ft_mem_realloc( memory, sizeof ( *(ptr) ), \
(cursz), (newsz), \
(ptr), &error ) )
#define FT_MEM_QNEW_ARRAY( ptr, count ) \
FT_ASSIGNP_INNER( ptr, ft_mem_qrealloc( memory, sizeof ( *(ptr) ), \
0, (count), \
NULL, &error ) )
#define FT_MEM_QRENEW_ARRAY( ptr, cursz, newsz ) \
FT_ASSIGNP_INNER( ptr, ft_mem_qrealloc( memory, sizeof ( *(ptr) ), \
(cursz), (newsz), \
(ptr), &error ) )
#define FT_ALLOC( ptr, size ) \
FT_MEM_SET_ERROR( FT_MEM_ALLOC( ptr, size ) )
#define FT_REALLOC( ptr, cursz, newsz ) \
FT_MEM_SET_ERROR( FT_MEM_REALLOC( ptr, cursz, newsz ) )
#define FT_ALLOC_MULT( ptr, count, item_size ) \
FT_MEM_SET_ERROR( FT_MEM_ALLOC_MULT( ptr, count, item_size ) )
#define FT_REALLOC_MULT( ptr, oldcnt, newcnt, itmsz ) \
FT_MEM_SET_ERROR( FT_MEM_REALLOC_MULT( ptr, oldcnt, \
newcnt, itmsz ) )
#define FT_QALLOC( ptr, size ) \
FT_MEM_SET_ERROR( FT_MEM_QALLOC( ptr, size ) )
#define FT_QREALLOC( ptr, cursz, newsz ) \
FT_MEM_SET_ERROR( FT_MEM_QREALLOC( ptr, cursz, newsz ) )
#define FT_QALLOC_MULT( ptr, count, item_size ) \
FT_MEM_SET_ERROR( FT_MEM_QALLOC_MULT( ptr, count, item_size ) )
#define FT_QREALLOC_MULT( ptr, oldcnt, newcnt, itmsz ) \
FT_MEM_SET_ERROR( FT_MEM_QREALLOC_MULT( ptr, oldcnt, \
newcnt, itmsz ) )
#define FT_FREE( ptr ) FT_MEM_FREE( ptr )
#define FT_NEW( ptr ) FT_MEM_SET_ERROR( FT_MEM_NEW( ptr ) )
#define FT_NEW_ARRAY( ptr, count ) \
FT_MEM_SET_ERROR( FT_MEM_NEW_ARRAY( ptr, count ) )
#define FT_RENEW_ARRAY( ptr, curcnt, newcnt ) \
FT_MEM_SET_ERROR( FT_MEM_RENEW_ARRAY( ptr, curcnt, newcnt ) )
#define FT_QNEW( ptr ) \
FT_MEM_SET_ERROR( FT_MEM_QNEW( ptr ) )
#define FT_QNEW_ARRAY( ptr, count ) \
FT_MEM_SET_ERROR( FT_MEM_NEW_ARRAY( ptr, count ) )
#define FT_QRENEW_ARRAY( ptr, curcnt, newcnt ) \
FT_MEM_SET_ERROR( FT_MEM_RENEW_ARRAY( ptr, curcnt, newcnt ) )
FT_BASE( FT_Pointer )
ft_mem_strdup( FT_Memory memory,
const char* str,
FT_Error *p_error );
FT_BASE( FT_Pointer )
ft_mem_dup( FT_Memory memory,
const void* address,
FT_ULong size,
FT_Error *p_error );
#define FT_MEM_STRDUP( dst, str ) \
(dst) = (char*)ft_mem_strdup( memory, (const char*)(str), &error )
#define FT_STRDUP( dst, str ) \
FT_MEM_SET_ERROR( FT_MEM_STRDUP( dst, str ) )
#define FT_MEM_DUP( dst, address, size ) \
(dst) = ft_mem_dup( memory, (address), (FT_ULong)(size), &error )
#define FT_DUP( dst, address, size ) \
FT_MEM_SET_ERROR( FT_MEM_DUP( dst, address, size ) )
/* Return >= 1 if a truncation occurs. */
/* Return 0 if the source string fits the buffer. */
/* This is *not* the same as strlcpy(). */
FT_BASE( FT_Int )
ft_mem_strcpyn( char* dst,
const char* src,
FT_ULong size );
#define FT_STRCPYN( dst, src, size ) \
ft_mem_strcpyn( (char*)dst, (const char*)(src), (FT_ULong)(size) )
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftgloadr.h */
/* */
/* The FreeType glyph loader (specification). */
/* */
/* Copyright 2002, 2003, 2005, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTGLOADR_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Struct> */
/* FT_GlyphLoader */
/* */
/* <Description> */
/* The glyph loader is an internal object used to load several glyphs */
/* together (for example, in the case of composites). */
/* */
/* <Note> */
/* The glyph loader implementation is not part of the high-level API, */
/* hence the forward structure declaration. */
/* */
typedef struct FT_GlyphLoaderRec_* FT_GlyphLoader ;
/* moved to freetype.h in version 2.2 */
#if 0
#define FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS 1
#define FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES 2
#define FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID 4
#define FT_SUBGLYPH_FLAG_SCALE 8
#define FT_SUBGLYPH_FLAG_XY_SCALE 0x40
#define FT_SUBGLYPH_FLAG_2X2 0x80
#define FT_SUBGLYPH_FLAG_USE_MY_METRICS 0x200
#endif
typedef struct FT_SubGlyphRec_
{
FT_Int index;
FT_UShort flags;
FT_Int arg1;
FT_Int arg2;
FT_Matrix transform;
} FT_SubGlyphRec;
typedef struct FT_GlyphLoadRec_
{
/* outline */
FT_Outline outline;
/* extra points table */
FT_Vector* extra_points;
/* second extra points table */
FT_Vector* extra_points2;
/* number of subglyphs */
FT_UInt num_subglyphs;
/* subglyphs */
FT_SubGlyph subglyphs;
} FT_GlyphLoadRec, *FT_GlyphLoad;
typedef struct FT_GlyphLoaderRec_
{
FT_Memory memory;
FT_UInt max_points;
FT_UInt max_contours;
FT_UInt max_subglyphs;
FT_Bool use_extra;
FT_GlyphLoadRec base;
FT_GlyphLoadRec current;
/* for possible future extension? */
void* other;
} FT_GlyphLoaderRec;
/* create new empty glyph loader */
FT_BASE( FT_Error )
FT_GlyphLoader_New( FT_Memory memory,
FT_GlyphLoader *aloader );
/* add an extra points table to a glyph loader */
FT_BASE( FT_Error )
FT_GlyphLoader_CreateExtra( FT_GlyphLoader loader );
/* destroy a glyph loader */
FT_BASE( void )
FT_GlyphLoader_Done( FT_GlyphLoader loader );
/* reset a glyph loader (frees everything int it) */
FT_BASE( void )
FT_GlyphLoader_Reset( FT_GlyphLoader loader );
/* rewind a glyph loader */
FT_BASE( void )
FT_GlyphLoader_Rewind( FT_GlyphLoader loader );
/* check that there is enough space to add `n_points' and `n_contours' */
/* to the glyph loader */
FT_BASE( FT_Error )
FT_GlyphLoader_CheckPoints( FT_GlyphLoader loader,
FT_UInt n_points,
FT_UInt n_contours );
#define FT_GLYPHLOADER_CHECK_P( _loader, _count ) \
( (_count) == 0 || ((_loader)->base.outline.n_points + \
(_loader)->current.outline.n_points + \
(unsigned long)(_count)) <= (_loader)->max_points )
#define FT_GLYPHLOADER_CHECK_C( _loader, _count ) \
( (_count) == 0 || ((_loader)->base.outline.n_contours + \
(_loader)->current.outline.n_contours + \
(unsigned long)(_count)) <= (_loader)->max_contours )
#define FT_GLYPHLOADER_CHECK_POINTS( _loader, _points,_contours ) \
( ( FT_GLYPHLOADER_CHECK_P( _loader, _points ) && \
FT_GLYPHLOADER_CHECK_C( _loader, _contours ) ) \
? 0 \
: FT_GlyphLoader_CheckPoints( (_loader), (_points), (_contours) ) )
/* check that there is enough space to add `n_subs' sub-glyphs to */
/* a glyph loader */
FT_BASE( FT_Error )
FT_GlyphLoader_CheckSubGlyphs( FT_GlyphLoader loader,
FT_UInt n_subs );
/* prepare a glyph loader, i.e. empty the current glyph */
FT_BASE( void )
FT_GlyphLoader_Prepare( FT_GlyphLoader loader );
/* add the current glyph to the base glyph */
FT_BASE( void )
FT_GlyphLoader_Add( FT_GlyphLoader loader );
/* copy points from one glyph loader to another */
FT_BASE( FT_Error )
FT_GlyphLoader_CopyPoints( FT_GlyphLoader target,
FT_GlyphLoader source );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftdriver.h */
/* */
/* FreeType font driver interface (specification). */
/* */
/* Copyright 1996-2003, 2006, 2008, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTDRIVER_H__
FT_BEGIN_HEADER
typedef FT_Error
(*FT_Face_InitFunc)( FT_Stream stream,
FT_Face face,
FT_Int typeface_index,
FT_Int num_params,
FT_Parameter* parameters );
typedef void
(*FT_Face_DoneFunc)( FT_Face face );
typedef FT_Error
(*FT_Size_InitFunc)( FT_Size size );
typedef void
(*FT_Size_DoneFunc)( FT_Size size );
typedef FT_Error
(*FT_Slot_InitFunc)( FT_GlyphSlot slot );
typedef void
(*FT_Slot_DoneFunc)( FT_GlyphSlot slot );
typedef FT_Error
(*FT_Size_RequestFunc)( FT_Size size,
FT_Size_Request req );
typedef FT_Error
(*FT_Size_SelectFunc)( FT_Size size,
FT_ULong size_index );
typedef FT_Error
(*FT_Slot_LoadFunc)( FT_GlyphSlot slot,
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags );
typedef FT_UInt
(*FT_CharMap_CharIndexFunc)( FT_CharMap charmap,
FT_Long charcode );
typedef FT_Long
(*FT_CharMap_CharNextFunc)( FT_CharMap charmap,
FT_Long charcode );
typedef FT_Error
(*FT_Face_GetKerningFunc)( FT_Face face,
FT_UInt left_glyph,
FT_UInt right_glyph,
FT_Vector* kerning );
typedef FT_Error
(*FT_Face_AttachFunc)( FT_Face face,
FT_Stream stream );
typedef FT_Error
(*FT_Face_GetAdvancesFunc)( FT_Face face,
FT_UInt first,
FT_UInt count,
FT_Int32 flags,
FT_Fixed* advances );
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Driver_ClassRec */
/* */
/* <Description> */
/* The font driver class. This structure mostly contains pointers to */
/* driver methods. */
/* */
/* <Fields> */
/* root :: The parent module. */
/* */
/* face_object_size :: The size of a face object in bytes. */
/* */
/* size_object_size :: The size of a size object in bytes. */
/* */
/* slot_object_size :: The size of a glyph object in bytes. */
/* */
/* init_face :: The format-specific face constructor. */
/* */
/* done_face :: The format-specific face destructor. */
/* */
/* init_size :: The format-specific size constructor. */
/* */
/* done_size :: The format-specific size destructor. */
/* */
/* init_slot :: The format-specific slot constructor. */
/* */
/* done_slot :: The format-specific slot destructor. */
/* */
/* */
/* load_glyph :: A function handle to load a glyph to a slot. */
/* This field is mandatory! */
/* */
/* get_kerning :: A function handle to return the unscaled */
/* kerning for a given pair of glyphs. Can be */
/* set to 0 if the format doesn't support */
/* kerning. */
/* */
/* attach_file :: This function handle is used to read */
/* additional data for a face from another */
/* file/stream. For example, this can be used to */
/* add data from AFM or PFM files on a Type 1 */
/* face, or a CIDMap on a CID-keyed face. */
/* */
/* get_advances :: A function handle used to return advance */
/* widths of `count' glyphs (in font units), */
/* starting at `first'. The `vertical' flag must */
/* be set to get vertical advance heights. The */
/* `advances' buffer is caller-allocated. */
/* The idea of this function is to be able to */
/* perform device-independent text layout without */
/* loading a single glyph image. */
/* */
/* request_size :: A handle to a function used to request the new */
/* character size. Can be set to 0 if the */
/* scaling done in the base layer suffices. */
/* */
/* select_size :: A handle to a function used to select a new */
/* fixed size. It is used only if */
/* @FT_FACE_FLAG_FIXED_SIZES is set. Can be set */
/* to 0 if the scaling done in the base layer */
/* suffices. */
/* <Note> */
/* Most function pointers, with the exception of `load_glyph', can be */
/* set to 0 to indicate a default behaviour. */
/* */
typedef struct FT_Driver_ClassRec_
{
FT_Module_Class root;
FT_Long face_object_size;
FT_Long size_object_size;
FT_Long slot_object_size;
FT_Face_InitFunc init_face;
FT_Face_DoneFunc done_face;
FT_Size_InitFunc init_size;
FT_Size_DoneFunc done_size;
FT_Slot_InitFunc init_slot;
FT_Slot_DoneFunc done_slot;
FT_Slot_LoadFunc load_glyph;
FT_Face_GetKerningFunc get_kerning;
FT_Face_AttachFunc attach_file;
FT_Face_GetAdvancesFunc get_advances;
/* since version 2.2 */
FT_Size_RequestFunc request_size;
FT_Size_SelectFunc select_size;
} FT_Driver_ClassRec, *FT_Driver_Class;
/*
* The following functions are used as stubs for `set_char_sizes' and
* `set_pixel_sizes'; the code uses `request_size' and `select_size'
* functions instead.
*
* Implementation is in `src/base/ftobjs.c'.
*/
/*************************************************************************/
/* */
/* <Macro> */
/* FT_DECLARE_DRIVER */
/* */
/* <Description> */
/* Used to create a forward declaration of an FT_Driver_ClassRec */
/* struct instance. */
/* */
/* <Macro> */
/* FT_DEFINE_DRIVER */
/* */
/* <Description> */
/* Used to initialize an instance of FT_Driver_ClassRec struct. */
/* */
/* When FT_CONFIG_OPTION_PIC is defined a `create' function has to be */
/* called with a pointer where the allocated structure is returned. */
/* And when it is no longer needed a `destroy' function needs to be */
/* called to release that allocation. */
/* */
/* `fcinit.c' (ft_create_default_module_classes) already contains a */
/* mechanism to call these functions for the default modules */
/* described in `ftmodule.h'. */
/* */
/* Notice that the created `create' and `destroy' functions call */
/* `pic_init' and `pic_free' to allow you to manually allocate and */
/* initialize any additional global data, like a module specific */
/* interface, and put them in the global pic container defined in */
/* `ftpic.h'. If you don't need them just implement the functions as */
/* empty to resolve the link error. Also the `pic_init' and */
/* `pic_free' functions should be declared in `pic.h', to be referred */
/* by driver definition calling `FT_DEFINE_DRIVER' in following. */
/* */
/* When FT_CONFIG_OPTION_PIC is not defined the struct will be */
/* allocated in the global scope (or the scope where the macro is */
/* used). */
/* */
/* empty */
#define FT_DEFINE_DRIVERS_OLD_INTERNALS( a_, b_ )
#define FT_DECLARE_DRIVER( class_ ) \
FT_CALLBACK_TABLE \
const FT_Driver_ClassRec class_;
#define FT_DEFINE_DRIVER( \
class_, \
flags_, \
size_, \
name_, \
version_, \
requires_, \
interface_, \
init_, \
done_, \
get_interface_, \
face_object_size_, \
size_object_size_, \
slot_object_size_, \
init_face_, \
done_face_, \
init_size_, \
done_size_, \
init_slot_, \
done_slot_, \
old_set_char_sizes_, \
old_set_pixel_sizes_, \
load_glyph_, \
get_kerning_, \
attach_file_, \
get_advances_, \
request_size_, \
select_size_ ) \
FT_CALLBACK_TABLE_DEF \
const FT_Driver_ClassRec class_ = \
{ \
FT_DEFINE_ROOT_MODULE( flags_, \
size_, \
name_, \
version_, \
requires_, \
interface_, \
init_, \
done_, \
get_interface_ ) \
\
face_object_size_, \
size_object_size_, \
slot_object_size_, \
\
init_face_, \
done_face_, \
\
init_size_, \
done_size_, \
\
init_slot_, \
done_slot_, \
\
FT_DEFINE_DRIVERS_OLD_INTERNALS( old_set_char_sizes_, \
old_set_pixel_sizes_ ) \
\
load_glyph_, \
\
get_kerning_, \
attach_file_, \
get_advances_, \
\
request_size_, \
select_size_ \
};
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* autohint.h */
/* */
/* High-level `autohint' module-specific interface (specification). */
/* */
/* Copyright 1996-2002, 2007, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The auto-hinter is used to load and automatically hint glyphs if a */
/* format-specific hinter isn't available. */
/* */
/*************************************************************************/
#define __AUTOHINT_H__
/*************************************************************************/
/* */
/* A small technical note regarding automatic hinting in order to */
/* clarify this module interface. */
/* */
/* An automatic hinter might compute two kinds of data for a given face: */
/* */
/* - global hints: Usually some metrics that describe global properties */
/* of the face. It is computed by scanning more or less */
/* aggressively the glyphs in the face, and thus can be */
/* very slow to compute (even if the size of global */
/* hints is really small). */
/* */
/* - glyph hints: These describe some important features of the glyph */
/* outline, as well as how to align them. They are */
/* generally much faster to compute than global hints. */
/* */
/* The current FreeType auto-hinter does a pretty good job while */
/* performing fast computations for both global and glyph hints. */
/* However, we might be interested in introducing more complex and */
/* powerful algorithms in the future, like the one described in the John */
/* D. Hobby paper, which unfortunately requires a lot more horsepower. */
/* */
/* Because a sufficiently sophisticated font management system would */
/* typically implement an LRU cache of opened face objects to reduce */
/* memory usage, it is a good idea to be able to avoid recomputing */
/* global hints every time the same face is re-opened. */
/* */
/* We thus provide the ability to cache global hints outside of the face */
/* object, in order to speed up font re-opening time. Of course, this */
/* feature is purely optional, so most client programs won't even notice */
/* it. */
/* */
/* I initially thought that it would be a good idea to cache the glyph */
/* hints too. However, my general idea now is that if you really need */
/* to cache these too, you are simply in need of a new font format, */
/* where all this information could be stored within the font file and */
/* decoded on the fly. */
/* */
/*************************************************************************/
FT_BEGIN_HEADER
typedef struct FT_AutoHinterRec_ *FT_AutoHinter;
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_AutoHinter_GlobalGetFunc */
/* */
/* <Description> */
/* Retrieve the global hints computed for a given face object. The */
/* resulting data is dissociated from the face and will survive a */
/* call to FT_Done_Face(). It must be discarded through the API */
/* FT_AutoHinter_GlobalDoneFunc(). */
/* */
/* <Input> */
/* hinter :: A handle to the source auto-hinter. */
/* */
/* face :: A handle to the source face object. */
/* */
/* <Output> */
/* global_hints :: A typeless pointer to the global hints. */
/* */
/* global_len :: The size in bytes of the global hints. */
/* */
typedef void
(*FT_AutoHinter_GlobalGetFunc)( FT_AutoHinter hinter,
FT_Face face,
void** global_hints,
long* global_len );
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_AutoHinter_GlobalDoneFunc */
/* */
/* <Description> */
/* Discard the global hints retrieved through */
/* FT_AutoHinter_GlobalGetFunc(). This is the only way these hints */
/* are freed from memory. */
/* */
/* <Input> */
/* hinter :: A handle to the auto-hinter module. */
/* */
/* global :: A pointer to retrieved global hints to discard. */
/* */
typedef void
(*FT_AutoHinter_GlobalDoneFunc)( FT_AutoHinter hinter,
void* global );
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_AutoHinter_GlobalResetFunc */
/* */
/* <Description> */
/* This function is used to recompute the global metrics in a given */
/* font. This is useful when global font data changes (e.g. Multiple */
/* Masters fonts where blend coordinates change). */
/* */
/* <Input> */
/* hinter :: A handle to the source auto-hinter. */
/* */
/* face :: A handle to the face. */
/* */
typedef void
(*FT_AutoHinter_GlobalResetFunc)( FT_AutoHinter hinter,
FT_Face face );
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_AutoHinter_GlyphLoadFunc */
/* */
/* <Description> */
/* This function is used to load, scale, and automatically hint a */
/* glyph from a given face. */
/* */
/* <Input> */
/* face :: A handle to the face. */
/* */
/* glyph_index :: The glyph index. */
/* */
/* load_flags :: The load flags. */
/* */
/* <Note> */
/* This function is capable of loading composite glyphs by hinting */
/* each sub-glyph independently (which improves quality). */
/* */
/* It will call the font driver with @FT_Load_Glyph, with */
/* @FT_LOAD_NO_SCALE set. */
/* */
typedef FT_Error
(*FT_AutoHinter_GlyphLoadFunc)( FT_AutoHinter hinter,
FT_GlyphSlot slot,
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags );
/*************************************************************************/
/* */
/* <Struct> */
/* FT_AutoHinter_InterfaceRec */
/* */
/* <Description> */
/* The auto-hinter module's interface. */
/* */
typedef struct FT_AutoHinter_InterfaceRec_
{
FT_AutoHinter_GlobalResetFunc reset_face;
FT_AutoHinter_GlobalGetFunc get_global_hints;
FT_AutoHinter_GlobalDoneFunc done_global_hints;
FT_AutoHinter_GlyphLoadFunc load_glyph;
} FT_AutoHinter_InterfaceRec, *FT_AutoHinter_Interface;
#define FT_DEFINE_AUTOHINTER_INTERFACE( \
class_, \
reset_face_, \
get_global_hints_, \
done_global_hints_, \
load_glyph_ ) \
FT_CALLBACK_TABLE_DEF \
const FT_AutoHinter_InterfaceRec class_ = \
{ \
reset_face_, \
get_global_hints_, \
done_global_hints_, \
load_glyph_ \
};
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftserv.h */
/* */
/* The FreeType services (specification only). */
/* */
/* Copyright 2003-2007, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* Each module can export one or more `services'. Each service is */
/* identified by a constant string and modeled by a pointer; the latter */
/* generally corresponds to a structure containing function pointers. */
/* */
/* Note that a service's data cannot be a mere function pointer because */
/* in C it is possible that function pointers might be implemented */
/* differently than data pointers (e.g. 48 bits instead of 32). */
/* */
/*************************************************************************/
#define __FTSERV_H__
FT_BEGIN_HEADER
/* Visual C++ (and Intel C++) */
#if defined( _MSC_VER )
/* we disable the warning `conditional expression is constant' here */
/* in order to compile cleanly with the maximum level of warnings */
#pragma warning( disable : 4127 )
/* _MSC_VER */
#endif
/*
* @macro:
* FT_FACE_FIND_SERVICE
*
* @description:
* This macro is used to look up a service from a face's driver module.
*
* @input:
* face ::
* The source face handle.
*
* id ::
* A string describing the service as defined in the service's
* header files (e.g. FT_SERVICE_ID_MULTI_MASTERS which expands to
* `multi-masters'). It is automatically prefixed with
* `FT_SERVICE_ID_'.
*
* @output:
* ptr ::
* A variable that receives the service pointer. Will be NULL
* if not found.
*/
#ifdef __cplusplus
#define FT_FACE_FIND_SERVICE( face, ptr, id ) \
FT_BEGIN_STMNT \
FT_Module module = FT_MODULE( FT_FACE( face )->driver ); \
FT_Pointer _tmp_ = NULL; \
FT_Pointer* _pptr_ = (FT_Pointer*)&(ptr); \
\
\
if ( module->clazz->get_interface ) \
_tmp_ = module->clazz->get_interface( module, FT_SERVICE_ID_ ## id ); \
*_pptr_ = _tmp_; \
FT_END_STMNT
/* !C++ */
#else
#define FT_FACE_FIND_SERVICE( face, ptr, id ) \
FT_BEGIN_STMNT \
FT_Module module = FT_MODULE( FT_FACE( face )->driver ); \
FT_Pointer _tmp_ = NULL; \
\
if ( module->clazz->get_interface ) \
_tmp_ = module->clazz->get_interface( module, FT_SERVICE_ID_ ## id ); \
ptr = _tmp_; \
FT_END_STMNT
/* !C++ */
#endif
/*
* @macro:
* FT_FACE_FIND_GLOBAL_SERVICE
*
* @description:
* This macro is used to look up a service from all modules.
*
* @input:
* face ::
* The source face handle.
*
* id ::
* A string describing the service as defined in the service's
* header files (e.g. FT_SERVICE_ID_MULTI_MASTERS which expands to
* `multi-masters'). It is automatically prefixed with
* `FT_SERVICE_ID_'.
*
* @output:
* ptr ::
* A variable that receives the service pointer. Will be NULL
* if not found.
*/
#ifdef __cplusplus
#define FT_FACE_FIND_GLOBAL_SERVICE( face, ptr, id ) \
FT_BEGIN_STMNT \
FT_Module module = FT_MODULE( FT_FACE( face )->driver ); \
FT_Pointer _tmp_; \
FT_Pointer* _pptr_ = (FT_Pointer*)&(ptr); \
\
\
_tmp_ = ft_module_get_service( module, FT_SERVICE_ID_ ## id ); \
*_pptr_ = _tmp_; \
FT_END_STMNT
/* !C++ */
#else
#define FT_FACE_FIND_GLOBAL_SERVICE( face, ptr, id ) \
FT_BEGIN_STMNT \
FT_Module module = FT_MODULE( FT_FACE( face )->driver ); \
FT_Pointer _tmp_; \
\
\
_tmp_ = ft_module_get_service( module, FT_SERVICE_ID_ ## id ); \
ptr = _tmp_; \
FT_END_STMNT
/* !C++ */
#endif
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** S E R V I C E D E S C R I P T O R S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*
* The following structure is used to _describe_ a given service
* to the library. This is useful to build simple static service lists.
*/
typedef struct FT_ServiceDescRec_
{
/* service name */
const char* serv_id;
/* service pointer/data */
const void* serv_data;
} FT_ServiceDescRec;
typedef const FT_ServiceDescRec* FT_ServiceDesc;
/*************************************************************************/
/* */
/* <Macro> */
/* FT_DEFINE_SERVICEDESCREC1 */
/* FT_DEFINE_SERVICEDESCREC2 */
/* FT_DEFINE_SERVICEDESCREC3 */
/* FT_DEFINE_SERVICEDESCREC4 */
/* FT_DEFINE_SERVICEDESCREC5 */
/* FT_DEFINE_SERVICEDESCREC6 */
/* */
/* <Description> */
/* Used to initialize an array of FT_ServiceDescRec structures. */
/* */
/* When FT_CONFIG_OPTION_PIC is defined a `create' function needs to */
/* be called with a pointer to return an allocated array. As soon as */
/* it is no longer needed, a `destroy' function needs to be called to */
/* release that allocation. */
/* */
/* These functions should be manually called from the `pic_init' and */
/* `pic_free' functions of your module (see FT_DEFINE_MODULE). */
/* */
/* When FT_CONFIG_OPTION_PIC is not defined the array will be */
/* allocated in the global scope (or the scope where the macro is */
/* used). */
/* */
#define FT_DEFINE_SERVICEDESCREC1( class_, \
serv_id_1, serv_data_1 ) \
static const FT_ServiceDescRec class_[] = \
{ \
{ serv_id_1, serv_data_1 }, \
{ NULL, NULL } \
};
#define FT_DEFINE_SERVICEDESCREC2( class_, \
serv_id_1, serv_data_1, \
serv_id_2, serv_data_2 ) \
static const FT_ServiceDescRec class_[] = \
{ \
{ serv_id_1, serv_data_1 }, \
{ serv_id_2, serv_data_2 }, \
{ NULL, NULL } \
};
#define FT_DEFINE_SERVICEDESCREC3( class_, \
serv_id_1, serv_data_1, \
serv_id_2, serv_data_2, \
serv_id_3, serv_data_3 ) \
static const FT_ServiceDescRec class_[] = \
{ \
{ serv_id_1, serv_data_1 }, \
{ serv_id_2, serv_data_2 }, \
{ serv_id_3, serv_data_3 }, \
{ NULL, NULL } \
};
#define FT_DEFINE_SERVICEDESCREC4( class_, \
serv_id_1, serv_data_1, \
serv_id_2, serv_data_2, \
serv_id_3, serv_data_3, \
serv_id_4, serv_data_4 ) \
static const FT_ServiceDescRec class_[] = \
{ \
{ serv_id_1, serv_data_1 }, \
{ serv_id_2, serv_data_2 }, \
{ serv_id_3, serv_data_3 }, \
{ serv_id_4, serv_data_4 }, \
{ NULL, NULL } \
};
#define FT_DEFINE_SERVICEDESCREC5( class_, \
serv_id_1, serv_data_1, \
serv_id_2, serv_data_2, \
serv_id_3, serv_data_3, \
serv_id_4, serv_data_4, \
serv_id_5, serv_data_5 ) \
static const FT_ServiceDescRec class_[] = \
{ \
{ serv_id_1, serv_data_1 }, \
{ serv_id_2, serv_data_2 }, \
{ serv_id_3, serv_data_3 }, \
{ serv_id_4, serv_data_4 }, \
{ serv_id_5, serv_data_5 }, \
{ NULL, NULL } \
};
#define FT_DEFINE_SERVICEDESCREC6( class_, \
serv_id_1, serv_data_1, \
serv_id_2, serv_data_2, \
serv_id_3, serv_data_3, \
serv_id_4, serv_data_4, \
serv_id_5, serv_data_5, \
serv_id_6, serv_data_6 ) \
static const FT_ServiceDescRec class_[] = \
{ \
{ serv_id_1, serv_data_1 }, \
{ serv_id_2, serv_data_2 }, \
{ serv_id_3, serv_data_3 }, \
{ serv_id_4, serv_data_4 }, \
{ serv_id_5, serv_data_5 }, \
{ serv_id_6, serv_data_6 }, \
{ NULL, NULL } \
};
/*
* Parse a list of FT_ServiceDescRec descriptors and look for
* a specific service by ID. Note that the last element in the
* array must be { NULL, NULL }, and that the function should
* return NULL if the service isn't available.
*
* This function can be used by modules to implement their
* `get_service' method.
*/
FT_BASE( FT_Pointer )
ft_service_list_lookup( FT_ServiceDesc service_descriptors,
const char* service_id );
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** S E R V I C E S C A C H E *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*
* This structure is used to store a cache for several frequently used
* services. It is the type of `face->internal->services'. You
* should only use FT_FACE_LOOKUP_SERVICE to access it.
*
* All fields should have the type FT_Pointer to relax compilation
* dependencies. We assume the developer isn't completely stupid.
*
* Each field must be named `service_XXXX' where `XXX' corresponds to
* the correct FT_SERVICE_ID_XXXX macro. See the definition of
* FT_FACE_LOOKUP_SERVICE below how this is implemented.
*
*/
typedef struct FT_ServiceCacheRec_
{
FT_Pointer service_POSTSCRIPT_FONT_NAME;
FT_Pointer service_MULTI_MASTERS;
FT_Pointer service_GLYPH_DICT;
FT_Pointer service_PFR_METRICS;
FT_Pointer service_WINFNT;
} FT_ServiceCacheRec, *FT_ServiceCache;
/*
* A magic number used within the services cache.
*/
/* magic number */
#define FT_SERVICE_UNAVAILABLE ((FT_Pointer)~1)
/*
* @macro:
* FT_FACE_LOOKUP_SERVICE
*
* @description:
* This macro is used to lookup a service from a face's driver module
* using its cache.
*
* @input:
* face::
* The source face handle containing the cache.
*
* field ::
* The field name in the cache.
*
* id ::
* The service ID.
*
* @output:
* ptr ::
* A variable receiving the service data. NULL if not available.
*/
#ifdef __cplusplus
#define FT_FACE_LOOKUP_SERVICE( face, ptr, id ) \
FT_BEGIN_STMNT \
FT_Pointer svc; \
FT_Pointer* Pptr = (FT_Pointer*)&(ptr); \
\
\
svc = FT_FACE( face )->internal->services. service_ ## id; \
if ( svc == FT_SERVICE_UNAVAILABLE ) \
svc = NULL; \
else if ( svc == NULL ) \
{ \
FT_FACE_FIND_SERVICE( face, svc, id ); \
\
FT_FACE( face )->internal->services. service_ ## id = \
(FT_Pointer)( svc != NULL ? svc \
: FT_SERVICE_UNAVAILABLE ); \
} \
*Pptr = svc; \
FT_END_STMNT
/* !C++ */
#else
#define FT_FACE_LOOKUP_SERVICE( face, ptr, id ) \
FT_BEGIN_STMNT \
FT_Pointer svc; \
\
\
svc = FT_FACE( face )->internal->services. service_ ## id; \
if ( svc == FT_SERVICE_UNAVAILABLE ) \
svc = NULL; \
else if ( svc == NULL ) \
{ \
FT_FACE_FIND_SERVICE( face, svc, id ); \
\
FT_FACE( face )->internal->services. service_ ## id = \
(FT_Pointer)( svc != NULL ? svc \
: FT_SERVICE_UNAVAILABLE ); \
} \
ptr = svc; \
FT_END_STMNT
/* !C++ */
#endif
/*
* A macro used to define new service structure types.
*/
#define FT_DEFINE_SERVICE( name ) \
typedef struct FT_Service_ ## name ## Rec_ \
FT_Service_ ## name ## Rec ; \
typedef struct FT_Service_ ## name ## Rec_ \
const * FT_Service_ ## name ; \
struct FT_Service_ ## name ## Rec_
/* */
/*
* The header files containing the services.
*/
#define FT_SERVICE_BDF_H <freetype/internal/services/svbdf.h>
#define FT_SERVICE_CID_H <freetype/internal/services/svcid.h>
#define FT_SERVICE_GLYPH_DICT_H <freetype/internal/services/svgldict.h>
#define FT_SERVICE_GX_VALIDATE_H <freetype/internal/services/svgxval.h>
#define FT_SERVICE_KERNING_H <freetype/internal/services/svkern.h>
#define FT_SERVICE_MULTIPLE_MASTERS_H <freetype/internal/services/svmm.h>
#define FT_SERVICE_OPENTYPE_VALIDATE_H <freetype/internal/services/svotval.h>
#define FT_SERVICE_PFR_H <freetype/internal/services/svpfr.h>
#define FT_SERVICE_POSTSCRIPT_CMAPS_H <freetype/internal/services/svpscmap.h>
#define FT_SERVICE_POSTSCRIPT_INFO_H <freetype/internal/services/svpsinfo.h>
#define FT_SERVICE_POSTSCRIPT_NAME_H <freetype/internal/services/svpostnm.h>
#define FT_SERVICE_PROPERTIES_H <freetype/internal/services/svprop.h>
#define FT_SERVICE_SFNT_H <freetype/internal/services/svsfnt.h>
#define FT_SERVICE_TRUETYPE_ENGINE_H <freetype/internal/services/svtteng.h>
#define FT_SERVICE_TT_CMAP_H <freetype/internal/services/svttcmap.h>
#define FT_SERVICE_WINFNT_H <freetype/internal/services/svwinfnt.h>
#define FT_SERVICE_XFREE86_NAME_H <freetype/internal/services/svxf86nm.h>
#define FT_SERVICE_TRUETYPE_GLYF_H <freetype/internal/services/svttglyf.h>
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftpic.h */
/* */
/* The FreeType position independent code services (declaration). */
/* */
/* Copyright 2009, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* Modules that ordinarily have const global data that need address */
/* can instead define pointers here. */
/* */
/*************************************************************************/
#define __FTPIC_H__
FT_BEGIN_HEADER
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftincrem.h */
/* */
/* FreeType incremental loading (specification). */
/* */
/* Copyright 2002, 2003, 2006, 2007, 2008, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTINCREM_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/***************************************************************************
*
* @section:
* incremental
*
* @title:
* Incremental Loading
*
* @abstract:
* Custom Glyph Loading.
*
* @description:
* This section contains various functions used to perform so-called
* `incremental' glyph loading. This is a mode where all glyphs loaded
* from a given @FT_Face are provided by the client application,
*
* Apart from that, all other tables are loaded normally from the font
* file. This mode is useful when FreeType is used within another
* engine, e.g., a PostScript Imaging Processor.
*
* To enable this mode, you must use @FT_Open_Face, passing an
* @FT_Parameter with the @FT_PARAM_TAG_INCREMENTAL tag and an
* @FT_Incremental_Interface value. See the comments for
* @FT_Incremental_InterfaceRec for an example.
*
*/
/***************************************************************************
*
* @type:
* FT_Incremental
*
* @description:
* An opaque type describing a user-provided object used to implement
* `incremental' glyph loading within FreeType. This is used to support
* embedded fonts in certain environments (e.g., PostScript interpreters),
* where the glyph data isn't in the font file, or must be overridden by
* different values.
*
* @note:
* It is up to client applications to create and implement @FT_Incremental
* objects, as long as they provide implementations for the methods
* @FT_Incremental_GetGlyphDataFunc, @FT_Incremental_FreeGlyphDataFunc
* and @FT_Incremental_GetGlyphMetricsFunc.
*
* See the description of @FT_Incremental_InterfaceRec to understand how
* to use incremental objects with FreeType.
*
*/
typedef struct FT_IncrementalRec_* FT_Incremental;
/***************************************************************************
*
* @struct:
* FT_Incremental_MetricsRec
*
* @description:
* A small structure used to contain the basic glyph metrics returned
* by the @FT_Incremental_GetGlyphMetricsFunc method.
*
* @fields:
* bearing_x ::
* Left bearing, in font units.
*
* bearing_y ::
* Top bearing, in font units.
*
* advance ::
* Horizontal component of glyph advance, in font units.
*
* advance_v ::
* Vertical component of glyph advance, in font units.
*
* @note:
* These correspond to horizontal or vertical metrics depending on the
* value of the `vertical' argument to the function
* @FT_Incremental_GetGlyphMetricsFunc.
*
*/
typedef struct FT_Incremental_MetricsRec_
{
FT_Long bearing_x;
FT_Long bearing_y;
FT_Long advance;
/* since 2.3.12 */
FT_Long advance_v;
} FT_Incremental_MetricsRec;
/***************************************************************************
*
* @struct:
* FT_Incremental_Metrics
*
* @description:
* A handle to an @FT_Incremental_MetricsRec structure.
*
*/
typedef struct FT_Incremental_MetricsRec_* FT_Incremental_Metrics;
/***************************************************************************
*
* @type:
* FT_Incremental_GetGlyphDataFunc
*
* @description:
* A function called by FreeType to access a given glyph's data bytes
* during @FT_Load_Glyph or @FT_Load_Char if incremental loading is
* enabled.
*
* Note that the format of the glyph's data bytes depends on the font
* file format. For TrueType, it must correspond to the raw bytes within
* the `glyf' table. For PostScript formats, it must correspond to the
* *unencrypted* charstring bytes, without any `lenIV' header. It is
* undefined for any other format.
*
* @input:
* incremental ::
* Handle to an opaque @FT_Incremental handle provided by the client
* application.
*
* glyph_index ::
* Index of relevant glyph.
*
* @output:
* adata ::
* A structure describing the returned glyph data bytes (which will be
* accessed as a read-only byte block).
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* If this function returns successfully the method
* @FT_Incremental_FreeGlyphDataFunc will be called later to release
* the data bytes.
*
* Nested calls to @FT_Incremental_GetGlyphDataFunc can happen for
* compound glyphs.
*
*/
typedef FT_Error
(*FT_Incremental_GetGlyphDataFunc)( FT_Incremental incremental,
FT_UInt glyph_index,
FT_Data* adata );
/***************************************************************************
*
* @type:
* FT_Incremental_FreeGlyphDataFunc
*
* @description:
* A function used to release the glyph data bytes returned by a
* successful call to @FT_Incremental_GetGlyphDataFunc.
*
* @input:
* incremental ::
* A handle to an opaque @FT_Incremental handle provided by the client
* application.
*
* data ::
* A structure describing the glyph data bytes (which will be accessed
* as a read-only byte block).
*
*/
typedef void
(*FT_Incremental_FreeGlyphDataFunc)( FT_Incremental incremental,
FT_Data* data );
/***************************************************************************
*
* @type:
* FT_Incremental_GetGlyphMetricsFunc
*
* @description:
* A function used to retrieve the basic metrics of a given glyph index
* before accessing its data. This is necessary because, in certain
* formats like TrueType, the metrics are stored in a different place from
* the glyph images proper.
*
* @input:
* incremental ::
* A handle to an opaque @FT_Incremental handle provided by the client
* application.
*
* glyph_index ::
* Index of relevant glyph.
*
* vertical ::
* If true, return vertical metrics.
*
* ametrics ::
* This parameter is used for both input and output.
* The original glyph metrics, if any, in font units. If metrics are
* not available all the values must be set to zero.
*
* @output:
* ametrics ::
* The replacement glyph metrics in font units.
*
*/
typedef FT_Error
(*FT_Incremental_GetGlyphMetricsFunc)
( FT_Incremental incremental,
FT_UInt glyph_index,
FT_Bool vertical,
FT_Incremental_MetricsRec *ametrics );
/**************************************************************************
*
* @struct:
* FT_Incremental_FuncsRec
*
* @description:
* A table of functions for accessing fonts that load data
* incrementally. Used in @FT_Incremental_InterfaceRec.
*
* @fields:
* get_glyph_data ::
* The function to get glyph data. Must not be null.
*
* free_glyph_data ::
* The function to release glyph data. Must not be null.
*
* get_glyph_metrics ::
* The function to get glyph metrics. May be null if the font does
* not provide overriding glyph metrics.
*
*/
typedef struct FT_Incremental_FuncsRec_
{
FT_Incremental_GetGlyphDataFunc get_glyph_data;
FT_Incremental_FreeGlyphDataFunc free_glyph_data;
FT_Incremental_GetGlyphMetricsFunc get_glyph_metrics;
} FT_Incremental_FuncsRec;
/***************************************************************************
*
* @struct:
* FT_Incremental_InterfaceRec
*
* @description:
* A structure to be used with @FT_Open_Face to indicate that the user
* wants to support incremental glyph loading. You should use it with
* @FT_PARAM_TAG_INCREMENTAL as in the following example:
*
* {
* FT_Incremental_InterfaceRec inc_int;
* FT_Parameter parameter;
* FT_Open_Args open_args;
*
*
* // set up incremental descriptor
* inc_int.funcs = my_funcs;
* inc_int.object = my_object;
*
* // set up optional parameter
* parameter.tag = FT_PARAM_TAG_INCREMENTAL;
* parameter.data = &inc_int;
*
* // set up FT_Open_Args structure
* open_args.flags = FT_OPEN_PATHNAME | FT_OPEN_PARAMS;
* open_args.pathname = my_font_pathname;
* open_args.num_params = 1;
* open_args.params = &parameter; // we use one optional argument
*
* // open the font
* error = FT_Open_Face( library, &open_args, index, &face );
* ...
* }
*
*/
typedef struct FT_Incremental_InterfaceRec_
{
const FT_Incremental_FuncsRec* funcs;
FT_Incremental object;
} FT_Incremental_InterfaceRec;
/***************************************************************************
*
* @type:
* FT_Incremental_Interface
*
* @description:
* A pointer to an @FT_Incremental_InterfaceRec structure.
*
*/
typedef FT_Incremental_InterfaceRec* FT_Incremental_Interface;
/***************************************************************************
*
* @constant:
* FT_PARAM_TAG_INCREMENTAL
*
* @description:
* A constant used as the tag of @FT_Parameter structures to indicate
* an incremental loading object to be used by FreeType.
*
*/
#define FT_PARAM_TAG_INCREMENTAL FT_MAKE_TAG( 'i', 'n', 'c', 'r' )
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* Some generic definitions. */
/* */
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#ifndef NULL
#define NULL (void*)0
#endif
/*************************************************************************/
/* */
/* The min and max functions missing in C. As usual, be careful not to */
/* write things like FT_MIN( a++, b++ ) to avoid side effects. */
/* */
#define FT_MIN( a, b ) ( (a) < (b) ? (a) : (b) )
#define FT_MAX( a, b ) ( (a) > (b) ? (a) : (b) )
#define FT_ABS( a ) ( (a) < 0 ? -(a) : (a) )
#define FT_PAD_FLOOR( x, n ) ( (x) & ~((n)-1) )
#define FT_PAD_ROUND( x, n ) FT_PAD_FLOOR( (x) + ((n)/2), n )
#define FT_PAD_CEIL( x, n ) FT_PAD_FLOOR( (x) + ((n)-1), n )
#define FT_PIX_FLOOR( x ) ( (x) & ~63 )
#define FT_PIX_ROUND( x ) FT_PIX_FLOOR( (x) + 32 )
#define FT_PIX_CEIL( x ) FT_PIX_FLOOR( (x) + 63 )
/*
* Return the highest power of 2 that is <= value; this correspond to
* the highest bit in a given 32-bit value.
*/
FT_BASE( FT_UInt32 )
ft_highpow2( FT_UInt32 value );
/*
* character classification functions -- since these are used to parse
* font files, we must not use those in <ctypes.h> which are
* locale-dependent
*/
#define ft_isdigit( x ) ( ( (unsigned)(x) - '0' ) < 10U )
#define ft_isxdigit( x ) ( ( (unsigned)(x) - '0' ) < 10U || \
( (unsigned)(x) - 'a' ) < 6U || \
( (unsigned)(x) - 'A' ) < 6U )
/* the next two macros assume ASCII representation */
#define ft_isupper( x ) ( ( (unsigned)(x) - 'A' ) < 26U )
#define ft_islower( x ) ( ( (unsigned)(x) - 'a' ) < 26U )
#define ft_isalpha( x ) ( ft_isupper( x ) || ft_islower( x ) )
#define ft_isalnum( x ) ( ft_isdigit( x ) || ft_isalpha( x ) )
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** C H A R M A P S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* handle to internal charmap object */
typedef struct FT_CMapRec_* FT_CMap;
/* handle to charmap class structure */
typedef const struct FT_CMap_ClassRec_* FT_CMap_Class;
/* internal charmap object structure */
typedef struct FT_CMapRec_
{
FT_CharMapRec charmap;
FT_CMap_Class clazz;
} FT_CMapRec;
/* typecase any pointer to a charmap handle */
#define FT_CMAP( x ) ((FT_CMap)( x ))
/* obvious macros */
#define FT_CMAP_PLATFORM_ID( x ) FT_CMAP( x )->charmap.platform_id
#define FT_CMAP_ENCODING_ID( x ) FT_CMAP( x )->charmap.encoding_id
#define FT_CMAP_ENCODING( x ) FT_CMAP( x )->charmap.encoding
#define FT_CMAP_FACE( x ) FT_CMAP( x )->charmap.face
/* class method definitions */
typedef FT_Error
(*FT_CMap_InitFunc)( FT_CMap cmap,
FT_Pointer init_data );
typedef void
(*FT_CMap_DoneFunc)( FT_CMap cmap );
typedef FT_UInt
(*FT_CMap_CharIndexFunc)( FT_CMap cmap,
FT_UInt32 char_code );
typedef FT_UInt
(*FT_CMap_CharNextFunc)( FT_CMap cmap,
FT_UInt32 *achar_code );
typedef FT_UInt
(*FT_CMap_CharVarIndexFunc)( FT_CMap cmap,
FT_CMap unicode_cmap,
FT_UInt32 char_code,
FT_UInt32 variant_selector );
typedef FT_Bool
(*FT_CMap_CharVarIsDefaultFunc)( FT_CMap cmap,
FT_UInt32 char_code,
FT_UInt32 variant_selector );
typedef FT_UInt32 *
(*FT_CMap_VariantListFunc)( FT_CMap cmap,
FT_Memory mem );
typedef FT_UInt32 *
(*FT_CMap_CharVariantListFunc)( FT_CMap cmap,
FT_Memory mem,
FT_UInt32 char_code );
typedef FT_UInt32 *
(*FT_CMap_VariantCharListFunc)( FT_CMap cmap,
FT_Memory mem,
FT_UInt32 variant_selector );
typedef struct FT_CMap_ClassRec_
{
FT_ULong size;
FT_CMap_InitFunc init;
FT_CMap_DoneFunc done;
FT_CMap_CharIndexFunc char_index;
FT_CMap_CharNextFunc char_next;
/* Subsequent entries are special ones for format 14 -- the variant */
/* selector subtable which behaves like no other */
FT_CMap_CharVarIndexFunc char_var_index;
FT_CMap_CharVarIsDefaultFunc char_var_default;
FT_CMap_VariantListFunc variant_list;
FT_CMap_CharVariantListFunc charvariant_list;
FT_CMap_VariantCharListFunc variantchar_list;
} FT_CMap_ClassRec;
#define FT_DECLARE_CMAP_CLASS( class_ ) \
FT_CALLBACK_TABLE const FT_CMap_ClassRec class_;
#define FT_DEFINE_CMAP_CLASS( \
class_, \
size_, \
init_, \
done_, \
char_index_, \
char_next_, \
char_var_index_, \
char_var_default_, \
variant_list_, \
charvariant_list_, \
variantchar_list_ ) \
FT_CALLBACK_TABLE_DEF \
const FT_CMap_ClassRec class_ = \
{ \
size_, \
init_, \
done_, \
char_index_, \
char_next_, \
char_var_index_, \
char_var_default_, \
variant_list_, \
charvariant_list_, \
variantchar_list_ \
};
/* create a new charmap and add it to charmap->face */
FT_BASE( FT_Error )
FT_CMap_New( FT_CMap_Class clazz,
FT_Pointer init_data,
FT_CharMap charmap,
FT_CMap *acmap );
/* destroy a charmap and remove it from face's list */
FT_BASE( void )
FT_CMap_Done( FT_CMap cmap );
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Face_InternalRec */
/* */
/* <Description> */
/* This structure contains the internal fields of each FT_Face */
/* object. These fields may change between different releases of */
/* FreeType. */
/* */
/* <Fields> */
/* max_points :: */
/* The maximum number of points used to store the vectorial outline */
/* of any glyph in this face. If this value cannot be known in */
/* advance, or if the face isn't scalable, this should be set to 0. */
/* Only relevant for scalable formats. */
/* */
/* max_contours :: */
/* The maximum number of contours used to store the vectorial */
/* outline of any glyph in this face. If this value cannot be */
/* known in advance, or if the face isn't scalable, this should be */
/* set to 0. Only relevant for scalable formats. */
/* */
/* transform_matrix :: */
/* A 2x2 matrix of 16.16 coefficients used to transform glyph */
/* outlines after they are loaded from the font. Only used by the */
/* convenience functions. */
/* */
/* transform_delta :: */
/* A translation vector used to transform glyph outlines after they */
/* are loaded from the font. Only used by the convenience */
/* functions. */
/* */
/* transform_flags :: */
/* Some flags used to classify the transform. Only used by the */
/* convenience functions. */
/* */
/* services :: */
/* A cache for frequently used services. It should be only */
/* accessed with the macro `FT_FACE_LOOKUP_SERVICE'. */
/* */
/* incremental_interface :: */
/* If non-null, the interface through which glyph data and metrics */
/* are loaded incrementally for faces that do not provide all of */
/* this data when first opened. This field exists only if */
/* @FT_CONFIG_OPTION_INCREMENTAL is defined. */
/* */
/* ignore_unpatented_hinter :: */
/* This boolean flag instructs the glyph loader to ignore the */
/* native font hinter, if one is found. This is exclusively used */
/* in the case when the unpatented hinter is compiled within the */
/* library. */
/* */
/* refcount :: */
/* A counter initialized to~1 at the time an @FT_Face structure is */
/* created. @FT_Reference_Face increments this counter, and */
/* @FT_Done_Face only destroys a face if the counter is~1, */
/* otherwise it simply decrements it. */
/* */
typedef struct FT_Face_InternalRec_
{
FT_Matrix transform_matrix;
FT_Vector transform_delta;
FT_Int transform_flags;
FT_ServiceCacheRec services;
FT_Incremental_InterfaceRec* incremental_interface;
FT_Bool ignore_unpatented_hinter;
FT_UInt refcount;
} FT_Face_InternalRec;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Slot_InternalRec */
/* */
/* <Description> */
/* This structure contains the internal fields of each FT_GlyphSlot */
/* object. These fields may change between different releases of */
/* FreeType. */
/* */
/* <Fields> */
/* loader :: The glyph loader object used to load outlines */
/* into the glyph slot. */
/* */
/* flags :: Possible values are zero or */
/* FT_GLYPH_OWN_BITMAP. The latter indicates */
/* that the FT_GlyphSlot structure owns the */
/* bitmap buffer. */
/* */
/* glyph_transformed :: Boolean. Set to TRUE when the loaded glyph */
/* must be transformed through a specific */
/* font transformation. This is _not_ the same */
/* as the face transform set through */
/* FT_Set_Transform(). */
/* */
/* glyph_matrix :: The 2x2 matrix corresponding to the glyph */
/* transformation, if necessary. */
/* */
/* glyph_delta :: The 2d translation vector corresponding to */
/* the glyph transformation, if necessary. */
/* */
/* glyph_hints :: Format-specific glyph hints management. */
/* */
#define FT_GLYPH_OWN_BITMAP 0x1
typedef struct FT_Slot_InternalRec_
{
FT_GlyphLoader loader;
FT_UInt flags;
FT_Bool glyph_transformed;
FT_Matrix glyph_matrix;
FT_Vector glyph_delta;
void* glyph_hints;
} FT_GlyphSlot_InternalRec;
#if 0
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Size_InternalRec */
/* */
/* <Description> */
/* This structure contains the internal fields of each FT_Size */
/* object. Currently, it's empty. */
/* */
/*************************************************************************/
typedef struct FT_Size_InternalRec_
{
/* empty */
} FT_Size_InternalRec;
#endif
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** M O D U L E S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* FT_ModuleRec */
/* */
/* <Description> */
/* A module object instance. */
/* */
/* <Fields> */
/* clazz :: A pointer to the module's class. */
/* */
/* library :: A handle to the parent library object. */
/* */
/* memory :: A handle to the memory manager. */
/* */
typedef struct FT_ModuleRec_
{
FT_Module_Class* clazz;
FT_Library library;
FT_Memory memory;
} FT_ModuleRec;
/* typecast an object to an FT_Module */
#define FT_MODULE( x ) ((FT_Module)( x ))
#define FT_MODULE_CLASS( x ) FT_MODULE( x )->clazz
#define FT_MODULE_LIBRARY( x ) FT_MODULE( x )->library
#define FT_MODULE_MEMORY( x ) FT_MODULE( x )->memory
#define FT_MODULE_IS_DRIVER( x ) ( FT_MODULE_CLASS( x )->module_flags & \
FT_MODULE_FONT_DRIVER )
#define FT_MODULE_IS_RENDERER( x ) ( FT_MODULE_CLASS( x )->module_flags & \
FT_MODULE_RENDERER )
#define FT_MODULE_IS_HINTER( x ) ( FT_MODULE_CLASS( x )->module_flags & \
FT_MODULE_HINTER )
#define FT_MODULE_IS_STYLER( x ) ( FT_MODULE_CLASS( x )->module_flags & \
FT_MODULE_STYLER )
#define FT_DRIVER_IS_SCALABLE( x ) ( FT_MODULE_CLASS( x )->module_flags & \
FT_MODULE_DRIVER_SCALABLE )
#define FT_DRIVER_USES_OUTLINES( x ) !( FT_MODULE_CLASS( x )->module_flags & \
FT_MODULE_DRIVER_NO_OUTLINES )
#define FT_DRIVER_HAS_HINTER( x ) ( FT_MODULE_CLASS( x )->module_flags & \
FT_MODULE_DRIVER_HAS_HINTER )
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Module_Interface */
/* */
/* <Description> */
/* Finds a module and returns its specific interface as a typeless */
/* pointer. */
/* */
/* <Input> */
/* library :: A handle to the library object. */
/* */
/* module_name :: The module's name (as an ASCII string). */
/* */
/* <Return> */
/* A module-specific interface if available, 0 otherwise. */
/* */
/* <Note> */
/* You should better be familiar with FreeType internals to know */
/* which module to look for, and what its interface is :-) */
/* */
FT_BASE( const void* )
FT_Get_Module_Interface( FT_Library library,
const char* mod_name );
FT_BASE( FT_Pointer )
ft_module_get_service( FT_Module module,
const char* service_id );
/* */
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** F A C E, S I Z E & G L Y P H S L O T O B J E C T S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* a few macros used to perform easy typecasts with minimal brain damage */
#define FT_FACE( x ) ((FT_Face)(x))
#define FT_SIZE( x ) ((FT_Size)(x))
#define FT_SLOT( x ) ((FT_GlyphSlot)(x))
#define FT_FACE_DRIVER( x ) FT_FACE( x )->driver
#define FT_FACE_LIBRARY( x ) FT_FACE_DRIVER( x )->root.library
#define FT_FACE_MEMORY( x ) FT_FACE( x )->memory
#define FT_FACE_STREAM( x ) FT_FACE( x )->stream
#define FT_SIZE_FACE( x ) FT_SIZE( x )->face
#define FT_SLOT_FACE( x ) FT_SLOT( x )->face
#define FT_FACE_SLOT( x ) FT_FACE( x )->glyph
#define FT_FACE_SIZE( x ) FT_FACE( x )->size
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_GlyphSlot */
/* */
/* <Description> */
/* It is sometimes useful to have more than one glyph slot for a */
/* given face object. This function is used to create additional */
/* slots. All of them are automatically discarded when the face is */
/* destroyed. */
/* */
/* <Input> */
/* face :: A handle to a parent face object. */
/* */
/* <Output> */
/* aslot :: A handle to a new glyph slot object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_BASE( FT_Error )
FT_New_GlyphSlot( FT_Face face,
FT_GlyphSlot *aslot );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Done_GlyphSlot */
/* */
/* <Description> */
/* Destroys a given glyph slot. Remember however that all slots are */
/* automatically destroyed with its parent. Using this function is */
/* not always mandatory. */
/* */
/* <Input> */
/* slot :: A handle to a target glyph slot. */
/* */
FT_BASE( void )
FT_Done_GlyphSlot( FT_GlyphSlot slot );
/* */
#define FT_REQUEST_WIDTH( req ) \
( (req)->horiResolution \
? (FT_Pos)( (req)->width * (req)->horiResolution + 36 ) / 72 \
: (req)->width )
#define FT_REQUEST_HEIGHT( req ) \
( (req)->vertResolution \
? (FT_Pos)( (req)->height * (req)->vertResolution + 36 ) / 72 \
: (req)->height )
/* Set the metrics according to a bitmap strike. */
FT_BASE( void )
FT_Select_Metrics( FT_Face face,
FT_ULong strike_index );
/* Set the metrics according to a size request. */
FT_BASE( void )
FT_Request_Metrics( FT_Face face,
FT_Size_Request req );
/* Match a size request against `available_sizes'. */
FT_BASE( FT_Error )
FT_Match_Size( FT_Face face,
FT_Size_Request req,
FT_Bool ignore_width,
FT_ULong* size_index );
/* Use the horizontal metrics to synthesize the vertical metrics. */
/* If `advance' is zero, it is also synthesized. */
FT_BASE( void )
ft_synthesize_vertical_metrics( FT_Glyph_Metrics* metrics,
FT_Pos advance );
/* Free the bitmap of a given glyphslot when needed (i.e., only when it */
/* was allocated with ft_glyphslot_alloc_bitmap). */
FT_BASE( void )
ft_glyphslot_free_bitmap( FT_GlyphSlot slot );
/* Allocate a new bitmap buffer in a glyph slot. */
FT_BASE( FT_Error )
ft_glyphslot_alloc_bitmap( FT_GlyphSlot slot,
FT_ULong size );
/* Set the bitmap buffer in a glyph slot to a given pointer. The buffer */
/* will not be freed by a later call to ft_glyphslot_free_bitmap. */
FT_BASE( void )
ft_glyphslot_set_bitmap( FT_GlyphSlot slot,
FT_Byte* buffer );
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** R E N D E R E R S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
#define FT_RENDERER( x ) ((FT_Renderer)( x ))
#define FT_GLYPH( x ) ((FT_Glyph)( x ))
#define FT_BITMAP_GLYPH( x ) ((FT_BitmapGlyph)( x ))
#define FT_OUTLINE_GLYPH( x ) ((FT_OutlineGlyph)( x ))
typedef struct FT_RendererRec_
{
FT_ModuleRec root;
FT_Renderer_Class* clazz;
FT_Glyph_Format glyph_format;
FT_Glyph_Class glyph_class;
FT_Raster raster;
FT_Raster_Render_Func raster_render;
FT_Renderer_RenderFunc render;
} FT_RendererRec;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** F O N T D R I V E R S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* typecast a module into a driver easily */
#define FT_DRIVER( x ) ((FT_Driver)(x))
/* typecast a module as a driver, and get its driver class */
#define FT_DRIVER_CLASS( x ) FT_DRIVER( x )->clazz
/*************************************************************************/
/* */
/* <Struct> */
/* FT_DriverRec */
/* */
/* <Description> */
/* The root font driver class. A font driver is responsible for */
/* managing and loading font files of a given format. */
/* */
/* <Fields> */
/* root :: Contains the fields of the root module class. */
/* */
/* clazz :: A pointer to the font driver's class. Note that */
/* this is NOT root.clazz. `class' wasn't used */
/* as it is a reserved word in C++. */
/* */
/* faces_list :: The list of faces currently opened by this */
/* driver. */
/* */
/* glyph_loader :: The glyph loader for all faces managed by this */
/* driver. This object isn't defined for unscalable */
/* formats. */
/* */
typedef struct FT_DriverRec_
{
FT_ModuleRec root;
FT_Driver_Class clazz;
FT_ListRec faces_list;
FT_GlyphLoader glyph_loader;
} FT_DriverRec;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** L I B R A R I E S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* This hook is used by the TrueType debugger. It must be set to an */
/* alternate truetype bytecode interpreter function. */
#define FT_DEBUG_HOOK_TRUETYPE 0
/* Set this debug hook to a non-null pointer to force unpatented hinting */
/* for all faces when both TT_USE_BYTECODE_INTERPRETER and */
/* TT_CONFIG_OPTION_UNPATENTED_HINTING are defined. This is only used */
/* during debugging. */
#define FT_DEBUG_HOOK_UNPATENTED_HINTING 1
typedef void (*FT_Bitmap_LcdFilterFunc)( FT_Bitmap* bitmap,
FT_Render_Mode render_mode,
FT_Library library );
/*************************************************************************/
/* */
/* <Struct> */
/* FT_LibraryRec */
/* */
/* <Description> */
/* The FreeType library class. This is the root of all FreeType */
/* data. Use FT_New_Library() to create a library object, and */
/* FT_Done_Library() to discard it and all child objects. */
/* */
/* <Fields> */
/* memory :: The library's memory object. Manages memory */
/* allocation. */
/* */
/* version_major :: The major version number of the library. */
/* */
/* version_minor :: The minor version number of the library. */
/* */
/* version_patch :: The current patch level of the library. */
/* */
/* num_modules :: The number of modules currently registered */
/* within this library. This is set to 0 for new */
/* libraries. New modules are added through the */
/* FT_Add_Module() API function. */
/* */
/* modules :: A table used to store handles to the currently */
/* registered modules. Note that each font driver */
/* contains a list of its opened faces. */
/* */
/* renderers :: The list of renderers currently registered */
/* within the library. */
/* */
/* cur_renderer :: The current outline renderer. This is a */
/* shortcut used to avoid parsing the list on */
/* each call to FT_Outline_Render(). It is a */
/* handle to the current renderer for the */
/* FT_GLYPH_FORMAT_OUTLINE format. */
/* */
/* auto_hinter :: XXX */
/* */
/* raster_pool :: The raster object's render pool. This can */
/* ideally be changed dynamically at run-time. */
/* */
/* raster_pool_size :: The size of the render pool in bytes. */
/* */
/* debug_hooks :: XXX */
/* */
/* lcd_filter :: If subpixel rendering is activated, the */
/* selected LCD filter mode. */
/* */
/* lcd_extra :: If subpixel rendering is activated, the number */
/* of extra pixels needed for the LCD filter. */
/* */
/* lcd_weights :: If subpixel rendering is activated, the LCD */
/* filter weights, if any. */
/* */
/* lcd_filter_func :: If subpixel rendering is activated, the LCD */
/* filtering callback function. */
/* */
/* pic_container :: Contains global structs and tables, instead */
/* of defining them globallly. */
/* */
/* refcount :: A counter initialized to~1 at the time an */
/* @FT_Library structure is created. */
/* @FT_Reference_Library increments this counter, */
/* and @FT_Done_Library only destroys a library */
/* if the counter is~1, otherwise it simply */
/* decrements it. */
/* */
typedef struct FT_LibraryRec_
{
/* library's memory manager */
FT_Memory memory;
FT_Int version_major;
FT_Int version_minor;
FT_Int version_patch;
FT_UInt num_modules;
/* module objects */
FT_Module modules[FT_MAX_MODULES];
/* list of renderers */
FT_ListRec renderers;
/* current outline renderer */
FT_Renderer cur_renderer;
FT_Module auto_hinter;
/* scan-line conversion */
FT_Byte* raster_pool;
/* render pool */
/* size of render pool in bytes */
FT_ULong raster_pool_size;
FT_DebugHook_Func debug_hooks[4];
FT_LcdFilter lcd_filter;
/* number of extra pixels */
FT_Int lcd_extra;
/* filter weights, if any */
FT_Byte lcd_weights[7];
/* filtering callback */
FT_Bitmap_LcdFilterFunc lcd_filter_func;
FT_UInt refcount;
} FT_LibraryRec;
FT_BASE( FT_Renderer )
FT_Lookup_Renderer( FT_Library library,
FT_Glyph_Format format,
FT_ListNode* node );
FT_BASE( FT_Error )
FT_Render_Glyph_Internal( FT_Library library,
FT_GlyphSlot slot,
FT_Render_Mode render_mode );
typedef const char*
(*FT_Face_GetPostscriptNameFunc)( FT_Face face );
typedef FT_Error
(*FT_Face_GetGlyphNameFunc)( FT_Face face,
FT_UInt glyph_index,
FT_Pointer buffer,
FT_UInt buffer_max );
typedef FT_UInt
(*FT_Face_GetGlyphNameIndexFunc)( FT_Face face,
FT_String* glyph_name );
#ifndef FT_CONFIG_OPTION_NO_DEFAULT_SYSTEM
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Memory */
/* */
/* <Description> */
/* Creates a new memory object. */
/* */
/* <Return> */
/* A pointer to the new memory object. 0 in case of error. */
/* */
FT_BASE( FT_Memory )
FT_New_Memory( void );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Done_Memory */
/* */
/* <Description> */
/* Discards memory manager. */
/* */
/* <Input> */
/* memory :: A handle to the memory manager. */
/* */
FT_BASE( void )
FT_Done_Memory( FT_Memory memory );
/* !FT_CONFIG_OPTION_NO_DEFAULT_SYSTEM */
#endif
/* Define default raster's interface. The default raster is located in */
/* `src/base/ftraster.c'. */
/* */
/* Client applications can register new rasters through the */
/* FT_Set_Raster() API. */
#ifndef FT_NO_DEFAULT_RASTER
FT_EXPORT_VAR( FT_Raster_Funcs ) ft_default_raster;
#endif
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** P I C S U P P O R T ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* PIC support macros for ftimage.h */
/*************************************************************************/
/* */
/* <Macro> */
/* FT_DEFINE_OUTLINE_FUNCS */
/* */
/* <Description> */
/* Used to initialize an instance of FT_Outline_Funcs struct. */
/* When FT_CONFIG_OPTION_PIC is defined an init funtion will need to */
/* be called with a pre-allocated structure to be filled. */
/* When FT_CONFIG_OPTION_PIC is not defined the struct will be */
/* allocated in the global scope (or the scope where the macro */
/* is used). */
/* */
#define FT_DEFINE_OUTLINE_FUNCS( \
class_, \
move_to_, \
line_to_, \
conic_to_, \
cubic_to_, \
shift_, \
delta_ ) \
static const FT_Outline_Funcs class_ = \
{ \
move_to_, \
line_to_, \
conic_to_, \
cubic_to_, \
shift_, \
delta_ \
};
/*************************************************************************/
/* */
/* <Macro> */
/* FT_DEFINE_RASTER_FUNCS */
/* */
/* <Description> */
/* Used to initialize an instance of FT_Raster_Funcs struct. */
/* When FT_CONFIG_OPTION_PIC is defined an init funtion will need to */
/* be called with a pre-allocated structure to be filled. */
/* When FT_CONFIG_OPTION_PIC is not defined the struct will be */
/* allocated in the global scope (or the scope where the macro */
/* is used). */
/* */
#define FT_DEFINE_RASTER_FUNCS( \
class_, \
glyph_format_, \
raster_new_, \
raster_reset_, \
raster_set_mode_, \
raster_render_, \
raster_done_ ) \
const FT_Raster_Funcs class_ = \
{ \
glyph_format_, \
raster_new_, \
raster_reset_, \
raster_set_mode_, \
raster_render_, \
raster_done_ \
};
/* PIC support macros for ftrender.h */
/*************************************************************************/
/* */
/* <Macro> */
/* FT_DEFINE_GLYPH */
/* */
/* <Description> */
/* Used to initialize an instance of FT_Glyph_Class struct. */
/* When FT_CONFIG_OPTION_PIC is defined an init funtion will need to */
/* be called with a pre-allocated stcture to be filled. */
/* When FT_CONFIG_OPTION_PIC is not defined the struct will be */
/* allocated in the global scope (or the scope where the macro */
/* is used). */
/* */
#define FT_DEFINE_GLYPH( \
class_, \
size_, \
format_, \
init_, \
done_, \
copy_, \
transform_, \
bbox_, \
prepare_ ) \
FT_CALLBACK_TABLE_DEF \
const FT_Glyph_Class class_ = \
{ \
size_, \
format_, \
init_, \
done_, \
copy_, \
transform_, \
bbox_, \
prepare_ \
};
/*************************************************************************/
/* */
/* <Macro> */
/* FT_DECLARE_RENDERER */
/* */
/* <Description> */
/* Used to create a forward declaration of a */
/* FT_Renderer_Class struct instance. */
/* */
/* <Macro> */
/* FT_DEFINE_RENDERER */
/* */
/* <Description> */
/* Used to initialize an instance of FT_Renderer_Class struct. */
/* */
/* When FT_CONFIG_OPTION_PIC is defined a `create' funtion will need */
/* to be called with a pointer where the allocated structure is */
/* returned. And when it is no longer needed a `destroy' function */
/* needs to be called to release that allocation. */
/* `fcinit.c' (ft_create_default_module_classes) already contains */
/* a mechanism to call these functions for the default modules */
/* described in `ftmodule.h'. */
/* */
/* Notice that the created `create' and `destroy' functions call */
/* `pic_init' and `pic_free' to allow you to manually allocate and */
/* initialize any additional global data, like a module specific */
/* interface, and put them in the global pic container defined in */
/* `ftpic.h'. If you don't need them just implement the functions as */
/* empty to resolve the link error. Also the `pic_init' and */
/* `pic_free' functions should be declared in `pic.h', to be referred */
/* by the renderer definition calling `FT_DEFINE_RENDERER' in the */
/* following. */
/* */
/* When FT_CONFIG_OPTION_PIC is not defined the struct will be */
/* allocated in the global scope (or the scope where the macro */
/* is used). */
/* */
#define FT_DECLARE_RENDERER( class_ ) \
FT_EXPORT_VAR( const FT_Renderer_Class ) class_;
#define FT_DEFINE_RENDERER( \
class_, \
flags_, \
size_, \
name_, \
version_, \
requires_, \
interface_, \
init_, \
done_, \
get_interface_, \
glyph_format_, \
render_glyph_, \
transform_glyph_, \
get_glyph_cbox_, \
set_mode_, \
raster_class_ ) \
FT_CALLBACK_TABLE_DEF \
const FT_Renderer_Class class_ = \
{ \
FT_DEFINE_ROOT_MODULE( flags_, \
size_, \
name_, \
version_, \
requires_, \
interface_, \
init_, \
done_, \
get_interface_ ) \
glyph_format_, \
\
render_glyph_, \
transform_glyph_, \
get_glyph_cbox_, \
set_mode_, \
\
raster_class_ \
};
/* PIC support macros for ftmodapi.h **/
/*************************************************************************/
/* */
/* <Macro> */
/* FT_DECLARE_MODULE */
/* */
/* <Description> */
/* Used to create a forward declaration of a */
/* FT_Module_Class struct instance. */
/* */
/* <Macro> */
/* FT_DEFINE_MODULE */
/* */
/* <Description> */
/* Used to initialize an instance of an FT_Module_Class struct. */
/* */
/* When FT_CONFIG_OPTION_PIC is defined a `create' funtion needs to */
/* be called with a pointer where the allocated structure is */
/* returned. And when it is no longer needed a `destroy' function */
/* needs to be called to release that allocation. */
/* `fcinit.c' (ft_create_default_module_classes) already contains */
/* a mechanism to call these functions for the default modules */
/* described in `ftmodule.h'. */
/* */
/* Notice that the created `create' and `destroy' functions call */
/* `pic_init' and `pic_free' to allow you to manually allocate and */
/* initialize any additional global data, like a module specific */
/* interface, and put them in the global pic container defined in */
/* `ftpic.h'. If you don't need them just implement the functions as */
/* empty to resolve the link error. Also the `pic_init' and */
/* `pic_free' functions should be declared in `pic.h', to be referred */
/* by the module definition calling `FT_DEFINE_MODULE' in the */
/* following. */
/* */
/* When FT_CONFIG_OPTION_PIC is not defined the struct will be */
/* allocated in the global scope (or the scope where the macro */
/* is used). */
/* */
/* <Macro> */
/* FT_DEFINE_ROOT_MODULE */
/* */
/* <Description> */
/* Used to initialize an instance of an FT_Module_Class struct inside */
/* another struct that contains it or in a function that initializes */
/* that containing struct. */
/* */
#define FT_DECLARE_MODULE( class_ ) \
FT_CALLBACK_TABLE \
const FT_Module_Class class_;
#define FT_DEFINE_ROOT_MODULE( \
flags_, \
size_, \
name_, \
version_, \
requires_, \
interface_, \
init_, \
done_, \
get_interface_ ) \
{ \
flags_, \
size_, \
\
name_, \
version_, \
requires_, \
\
interface_, \
\
init_, \
done_, \
get_interface_, \
},
#define FT_DEFINE_MODULE( \
class_, \
flags_, \
size_, \
name_, \
version_, \
requires_, \
interface_, \
init_, \
done_, \
get_interface_ ) \
FT_CALLBACK_TABLE_DEF \
const FT_Module_Class class_ = \
{ \
flags_, \
size_, \
\
name_, \
version_, \
requires_, \
\
interface_, \
\
init_, \
done_, \
get_interface_, \
};
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/* format of an 8-bit frame_op value: */
/* */
/* bit 76543210 */
/* xxxxxxes */
/* */
/* s is set to 1 if the value is signed. */
/* e is set to 1 if the value is little-endian. */
/* xxx is a command. */
#define FT_FRAME_OP_SHIFT 2
#define FT_FRAME_OP_SIGNED 1
#define FT_FRAME_OP_LITTLE 2
#define FT_FRAME_OP_COMMAND( x ) ( x >> FT_FRAME_OP_SHIFT )
#define FT_MAKE_FRAME_OP( command, little, sign ) \
( ( command << FT_FRAME_OP_SHIFT ) | ( little << 1 ) | sign )
#define FT_FRAME_OP_END 0
/* start a new frame */
#define FT_FRAME_OP_START 1
/* read 1-byte value */
#define FT_FRAME_OP_BYTE 2
/* read 2-byte value */
#define FT_FRAME_OP_SHORT 3
/* read 4-byte value */
#define FT_FRAME_OP_LONG 4
/* read 3-byte value */
#define FT_FRAME_OP_OFF3 5
/* read a bytes sequence */
#define FT_FRAME_OP_BYTES 6
typedef enum FT_Frame_Op_
{
ft_frame_end = 0,
ft_frame_start = FT_MAKE_FRAME_OP( FT_FRAME_OP_START, 0, 0 ),
ft_frame_byte = FT_MAKE_FRAME_OP( FT_FRAME_OP_BYTE, 0, 0 ),
ft_frame_schar = FT_MAKE_FRAME_OP( FT_FRAME_OP_BYTE, 0, 1 ),
ft_frame_ushort_be = FT_MAKE_FRAME_OP( FT_FRAME_OP_SHORT, 0, 0 ),
ft_frame_short_be = FT_MAKE_FRAME_OP( FT_FRAME_OP_SHORT, 0, 1 ),
ft_frame_ushort_le = FT_MAKE_FRAME_OP( FT_FRAME_OP_SHORT, 1, 0 ),
ft_frame_short_le = FT_MAKE_FRAME_OP( FT_FRAME_OP_SHORT, 1, 1 ),
ft_frame_ulong_be = FT_MAKE_FRAME_OP( FT_FRAME_OP_LONG, 0, 0 ),
ft_frame_long_be = FT_MAKE_FRAME_OP( FT_FRAME_OP_LONG, 0, 1 ),
ft_frame_ulong_le = FT_MAKE_FRAME_OP( FT_FRAME_OP_LONG, 1, 0 ),
ft_frame_long_le = FT_MAKE_FRAME_OP( FT_FRAME_OP_LONG, 1, 1 ),
ft_frame_uoff3_be = FT_MAKE_FRAME_OP( FT_FRAME_OP_OFF3, 0, 0 ),
ft_frame_off3_be = FT_MAKE_FRAME_OP( FT_FRAME_OP_OFF3, 0, 1 ),
ft_frame_uoff3_le = FT_MAKE_FRAME_OP( FT_FRAME_OP_OFF3, 1, 0 ),
ft_frame_off3_le = FT_MAKE_FRAME_OP( FT_FRAME_OP_OFF3, 1, 1 ),
ft_frame_bytes = FT_MAKE_FRAME_OP( FT_FRAME_OP_BYTES, 0, 0 ),
ft_frame_skip = FT_MAKE_FRAME_OP( FT_FRAME_OP_BYTES, 0, 1 )
} FT_Frame_Op;
typedef struct FT_Frame_Field_
{
FT_Byte value;
FT_Byte size;
FT_UShort offset;
} FT_Frame_Field;
/* Construct an FT_Frame_Field out of a structure type and a field name. */
/* The structure type must be set in the FT_STRUCTURE macro before */
/* calling the FT_FRAME_START() macro. */
/* */
#define FT_FIELD_SIZE( f ) \
(FT_Byte)sizeof ( ((FT_STRUCTURE*)0)->f )
#define FT_FIELD_SIZE_DELTA( f ) \
(FT_Byte)sizeof ( ((FT_STRUCTURE*)0)->f[0] )
#define FT_FIELD_OFFSET( f ) \
(FT_UShort)( offsetof( FT_STRUCTURE, f ) )
#define FT_FRAME_FIELD( frame_op, field ) \
{ \
frame_op, \
FT_FIELD_SIZE( field ), \
FT_FIELD_OFFSET( field ) \
}
#define FT_MAKE_EMPTY_FIELD( frame_op ) { frame_op, 0, 0 }
#define FT_FRAME_START( size ) { ft_frame_start, 0, size }
#define FT_FRAME_END { ft_frame_end, 0, 0 }
#define FT_FRAME_LONG( f ) FT_FRAME_FIELD( ft_frame_long_be, f )
#define FT_FRAME_ULONG( f ) FT_FRAME_FIELD( ft_frame_ulong_be, f )
#define FT_FRAME_SHORT( f ) FT_FRAME_FIELD( ft_frame_short_be, f )
#define FT_FRAME_USHORT( f ) FT_FRAME_FIELD( ft_frame_ushort_be, f )
#define FT_FRAME_OFF3( f ) FT_FRAME_FIELD( ft_frame_off3_be, f )
#define FT_FRAME_UOFF3( f ) FT_FRAME_FIELD( ft_frame_uoff3_be, f )
#define FT_FRAME_BYTE( f ) FT_FRAME_FIELD( ft_frame_byte, f )
#define FT_FRAME_CHAR( f ) FT_FRAME_FIELD( ft_frame_schar, f )
#define FT_FRAME_LONG_LE( f ) FT_FRAME_FIELD( ft_frame_long_le, f )
#define FT_FRAME_ULONG_LE( f ) FT_FRAME_FIELD( ft_frame_ulong_le, f )
#define FT_FRAME_SHORT_LE( f ) FT_FRAME_FIELD( ft_frame_short_le, f )
#define FT_FRAME_USHORT_LE( f ) FT_FRAME_FIELD( ft_frame_ushort_le, f )
#define FT_FRAME_OFF3_LE( f ) FT_FRAME_FIELD( ft_frame_off3_le, f )
#define FT_FRAME_UOFF3_LE( f ) FT_FRAME_FIELD( ft_frame_uoff3_le, f )
#define FT_FRAME_SKIP_LONG { ft_frame_long_be, 0, 0 }
#define FT_FRAME_SKIP_SHORT { ft_frame_short_be, 0, 0 }
#define FT_FRAME_SKIP_BYTE { ft_frame_byte, 0, 0 }
#define FT_FRAME_BYTES( field, count ) \
{ \
ft_frame_bytes, \
count, \
FT_FIELD_OFFSET( field ) \
}
#define FT_FRAME_SKIP_BYTES( count ) { ft_frame_skip, count, 0 }
/*************************************************************************/
/* */
/* Integer extraction macros -- the `buffer' parameter must ALWAYS be of */
/* type `char*' or equivalent (1-byte elements). */
/* */
#define FT_BYTE_( p, i ) ( ((const FT_Byte*)(p))[(i)] )
#define FT_INT8_( p, i ) ( ((const FT_Char*)(p))[(i)] )
#define FT_INT16( x ) ( (FT_Int16)(x) )
#define FT_UINT16( x ) ( (FT_UInt16)(x) )
#define FT_INT32( x ) ( (FT_Int32)(x) )
#define FT_UINT32( x ) ( (FT_UInt32)(x) )
#define FT_BYTE_I16( p, i, s ) ( FT_INT16( FT_BYTE_( p, i ) ) << (s) )
#define FT_BYTE_U16( p, i, s ) ( FT_UINT16( FT_BYTE_( p, i ) ) << (s) )
#define FT_BYTE_I32( p, i, s ) ( FT_INT32( FT_BYTE_( p, i ) ) << (s) )
#define FT_BYTE_U32( p, i, s ) ( FT_UINT32( FT_BYTE_( p, i ) ) << (s) )
#define FT_INT8_I16( p, i, s ) ( FT_INT16( FT_INT8_( p, i ) ) << (s) )
#define FT_INT8_U16( p, i, s ) ( FT_UINT16( FT_INT8_( p, i ) ) << (s) )
#define FT_INT8_I32( p, i, s ) ( FT_INT32( FT_INT8_( p, i ) ) << (s) )
#define FT_INT8_U32( p, i, s ) ( FT_UINT32( FT_INT8_( p, i ) ) << (s) )
#define FT_PEEK_SHORT( p ) FT_INT16( FT_INT8_I16( p, 0, 8) | \
FT_BYTE_I16( p, 1, 0) )
#define FT_PEEK_USHORT( p ) FT_UINT16( FT_BYTE_U16( p, 0, 8 ) | \
FT_BYTE_U16( p, 1, 0 ) )
#define FT_PEEK_LONG( p ) FT_INT32( FT_INT8_I32( p, 0, 24 ) | \
FT_BYTE_I32( p, 1, 16 ) | \
FT_BYTE_I32( p, 2, 8 ) | \
FT_BYTE_I32( p, 3, 0 ) )
#define FT_PEEK_ULONG( p ) FT_UINT32( FT_BYTE_U32( p, 0, 24 ) | \
FT_BYTE_U32( p, 1, 16 ) | \
FT_BYTE_U32( p, 2, 8 ) | \
FT_BYTE_U32( p, 3, 0 ) )
#define FT_PEEK_OFF3( p ) FT_INT32( FT_INT8_I32( p, 0, 16 ) | \
FT_BYTE_I32( p, 1, 8 ) | \
FT_BYTE_I32( p, 2, 0 ) )
#define FT_PEEK_UOFF3( p ) FT_UINT32( FT_BYTE_U32( p, 0, 16 ) | \
FT_BYTE_U32( p, 1, 8 ) | \
FT_BYTE_U32( p, 2, 0 ) )
#define FT_PEEK_SHORT_LE( p ) FT_INT16( FT_INT8_I16( p, 1, 8 ) | \
FT_BYTE_I16( p, 0, 0 ) )
#define FT_PEEK_USHORT_LE( p ) FT_UINT16( FT_BYTE_U16( p, 1, 8 ) | \
FT_BYTE_U16( p, 0, 0 ) )
#define FT_PEEK_LONG_LE( p ) FT_INT32( FT_INT8_I32( p, 3, 24 ) | \
FT_BYTE_I32( p, 2, 16 ) | \
FT_BYTE_I32( p, 1, 8 ) | \
FT_BYTE_I32( p, 0, 0 ) )
#define FT_PEEK_ULONG_LE( p ) FT_UINT32( FT_BYTE_U32( p, 3, 24 ) | \
FT_BYTE_U32( p, 2, 16 ) | \
FT_BYTE_U32( p, 1, 8 ) | \
FT_BYTE_U32( p, 0, 0 ) )
#define FT_PEEK_OFF3_LE( p ) FT_INT32( FT_INT8_I32( p, 2, 16 ) | \
FT_BYTE_I32( p, 1, 8 ) | \
FT_BYTE_I32( p, 0, 0 ) )
#define FT_PEEK_UOFF3_LE( p ) FT_UINT32( FT_BYTE_U32( p, 2, 16 ) | \
FT_BYTE_U32( p, 1, 8 ) | \
FT_BYTE_U32( p, 0, 0 ) )
#define FT_NEXT_CHAR( buffer ) \
( (signed char)*buffer++ )
#define FT_NEXT_BYTE( buffer ) \
( (unsigned char)*buffer++ )
#define FT_NEXT_SHORT( buffer ) \
( (short)( buffer += 2, FT_PEEK_SHORT( buffer - 2 ) ) )
#define FT_NEXT_USHORT( buffer ) \
( (unsigned short)( buffer += 2, FT_PEEK_USHORT( buffer - 2 ) ) )
#define FT_NEXT_OFF3( buffer ) \
( (long)( buffer += 3, FT_PEEK_OFF3( buffer - 3 ) ) )
#define FT_NEXT_UOFF3( buffer ) \
( (unsigned long)( buffer += 3, FT_PEEK_UOFF3( buffer - 3 ) ) )
#define FT_NEXT_LONG( buffer ) \
( (long)( buffer += 4, FT_PEEK_LONG( buffer - 4 ) ) )
#define FT_NEXT_ULONG( buffer ) \
( (unsigned long)( buffer += 4, FT_PEEK_ULONG( buffer - 4 ) ) )
#define FT_NEXT_SHORT_LE( buffer ) \
( (short)( buffer += 2, FT_PEEK_SHORT_LE( buffer - 2 ) ) )
#define FT_NEXT_USHORT_LE( buffer ) \
( (unsigned short)( buffer += 2, FT_PEEK_USHORT_LE( buffer - 2 ) ) )
#define FT_NEXT_OFF3_LE( buffer ) \
( (long)( buffer += 3, FT_PEEK_OFF3_LE( buffer - 3 ) ) )
#define FT_NEXT_UOFF3_LE( buffer ) \
( (unsigned long)( buffer += 3, FT_PEEK_UOFF3_LE( buffer - 3 ) ) )
#define FT_NEXT_LONG_LE( buffer ) \
( (long)( buffer += 4, FT_PEEK_LONG_LE( buffer - 4 ) ) )
#define FT_NEXT_ULONG_LE( buffer ) \
( (unsigned long)( buffer += 4, FT_PEEK_ULONG_LE( buffer - 4 ) ) )
/*************************************************************************/
/* */
/* Each GET_xxxx() macro uses an implicit `stream' variable. */
/* */
#if 0
#define FT_GET_MACRO( type ) FT_NEXT_ ## type ( stream->cursor )
#define FT_GET_CHAR() FT_GET_MACRO( CHAR )
#define FT_GET_BYTE() FT_GET_MACRO( BYTE )
#define FT_GET_SHORT() FT_GET_MACRO( SHORT )
#define FT_GET_USHORT() FT_GET_MACRO( USHORT )
#define FT_GET_OFF3() FT_GET_MACRO( OFF3 )
#define FT_GET_UOFF3() FT_GET_MACRO( UOFF3 )
#define FT_GET_LONG() FT_GET_MACRO( LONG )
#define FT_GET_ULONG() FT_GET_MACRO( ULONG )
#define FT_GET_TAG4() FT_GET_MACRO( ULONG )
#define FT_GET_SHORT_LE() FT_GET_MACRO( SHORT_LE )
#define FT_GET_USHORT_LE() FT_GET_MACRO( USHORT_LE )
#define FT_GET_LONG_LE() FT_GET_MACRO( LONG_LE )
#define FT_GET_ULONG_LE() FT_GET_MACRO( ULONG_LE )
#else
#define FT_GET_MACRO( func, type ) ( (type)func( stream ) )
#define FT_GET_CHAR() FT_GET_MACRO( FT_Stream_GetChar, FT_Char )
#define FT_GET_BYTE() FT_GET_MACRO( FT_Stream_GetChar, FT_Byte )
#define FT_GET_SHORT() FT_GET_MACRO( FT_Stream_GetUShort, FT_Short )
#define FT_GET_USHORT() FT_GET_MACRO( FT_Stream_GetUShort, FT_UShort )
#define FT_GET_OFF3() FT_GET_MACRO( FT_Stream_GetUOffset, FT_Long )
#define FT_GET_UOFF3() FT_GET_MACRO( FT_Stream_GetUOffset, FT_ULong )
#define FT_GET_LONG() FT_GET_MACRO( FT_Stream_GetULong, FT_Long )
#define FT_GET_ULONG() FT_GET_MACRO( FT_Stream_GetULong, FT_ULong )
#define FT_GET_TAG4() FT_GET_MACRO( FT_Stream_GetULong, FT_ULong )
#define FT_GET_SHORT_LE() FT_GET_MACRO( FT_Stream_GetUShortLE, FT_Short )
#define FT_GET_USHORT_LE() FT_GET_MACRO( FT_Stream_GetUShortLE, FT_UShort )
#define FT_GET_LONG_LE() FT_GET_MACRO( FT_Stream_GetULongLE, FT_Long )
#define FT_GET_ULONG_LE() FT_GET_MACRO( FT_Stream_GetULongLE, FT_ULong )
#endif
#define FT_READ_MACRO( func, type, var ) \
( var = (type)func( stream, &error ), \
error != FT_Err_Ok )
#define FT_READ_BYTE( var ) FT_READ_MACRO( FT_Stream_ReadChar, FT_Byte, var )
#define FT_READ_CHAR( var ) FT_READ_MACRO( FT_Stream_ReadChar, FT_Char, var )
#define FT_READ_SHORT( var ) FT_READ_MACRO( FT_Stream_ReadUShort, FT_Short, var )
#define FT_READ_USHORT( var ) FT_READ_MACRO( FT_Stream_ReadUShort, FT_UShort, var )
#define FT_READ_OFF3( var ) FT_READ_MACRO( FT_Stream_ReadUOffset, FT_Long, var )
#define FT_READ_UOFF3( var ) FT_READ_MACRO( FT_Stream_ReadUOffset, FT_ULong, var )
#define FT_READ_LONG( var ) FT_READ_MACRO( FT_Stream_ReadULong, FT_Long, var )
#define FT_READ_ULONG( var ) FT_READ_MACRO( FT_Stream_ReadULong, FT_ULong, var )
#define FT_READ_SHORT_LE( var ) FT_READ_MACRO( FT_Stream_ReadUShortLE, FT_Short, var )
#define FT_READ_USHORT_LE( var ) FT_READ_MACRO( FT_Stream_ReadUShortLE, FT_UShort, var )
#define FT_READ_LONG_LE( var ) FT_READ_MACRO( FT_Stream_ReadULongLE, FT_Long, var )
#define FT_READ_ULONG_LE( var ) FT_READ_MACRO( FT_Stream_ReadULongLE, FT_ULong, var )
#ifndef FT_CONFIG_OPTION_NO_DEFAULT_SYSTEM
/* initialize a stream for reading a regular system stream */
FT_BASE( FT_Error )
FT_Stream_Open( FT_Stream stream,
const char* filepathname );
/* FT_CONFIG_OPTION_NO_DEFAULT_SYSTEM */
#endif
/* create a new (input) stream from an FT_Open_Args structure */
FT_BASE( FT_Error )
FT_Stream_New( FT_Library library,
const FT_Open_Args* args,
FT_Stream *astream );
/* free a stream */
FT_BASE( void )
FT_Stream_Free( FT_Stream stream,
FT_Int external );
/* initialize a stream for reading in-memory data */
FT_BASE( void )
FT_Stream_OpenMemory( FT_Stream stream,
const FT_Byte* base,
FT_ULong size );
/* close a stream (does not destroy the stream structure) */
FT_BASE( void )
FT_Stream_Close( FT_Stream stream );
/* seek within a stream. position is relative to start of stream */
FT_BASE( FT_Error )
FT_Stream_Seek( FT_Stream stream,
FT_ULong pos );
/* skip bytes in a stream */
FT_BASE( FT_Error )
FT_Stream_Skip( FT_Stream stream,
FT_Long distance );
/* return current stream position */
FT_BASE( FT_Long )
FT_Stream_Pos( FT_Stream stream );
/* read bytes from a stream into a user-allocated buffer, returns an */
/* error if not all bytes could be read. */
FT_BASE( FT_Error )
FT_Stream_Read( FT_Stream stream,
FT_Byte* buffer,
FT_ULong count );
/* read bytes from a stream at a given position */
FT_BASE( FT_Error )
FT_Stream_ReadAt( FT_Stream stream,
FT_ULong pos,
FT_Byte* buffer,
FT_ULong count );
/* try to read bytes at the end of a stream; return number of bytes */
/* really available */
FT_BASE( FT_ULong )
FT_Stream_TryRead( FT_Stream stream,
FT_Byte* buffer,
FT_ULong count );
/* Enter a frame of `count' consecutive bytes in a stream. Returns an */
/* error if the frame could not be read/accessed. The caller can use */
/* the FT_Stream_Get_XXX functions to retrieve frame data without */
/* error checks. */
/* */
/* You must _always_ call FT_Stream_ExitFrame() once you have entered */
/* a stream frame! */
/* */
FT_BASE( FT_Error )
FT_Stream_EnterFrame( FT_Stream stream,
FT_ULong count );
/* exit a stream frame */
FT_BASE( void )
FT_Stream_ExitFrame( FT_Stream stream );
/* Extract a stream frame. If the stream is disk-based, a heap block */
/* is allocated and the frame bytes are read into it. If the stream */
/* is memory-based, this function simply set a pointer to the data. */
/* */
/* Useful to optimize access to memory-based streams transparently. */
/* */
/* All extracted frames must be `freed' with a call to the function */
/* FT_Stream_ReleaseFrame(). */
/* */
FT_BASE( FT_Error )
FT_Stream_ExtractFrame( FT_Stream stream,
FT_ULong count,
FT_Byte** pbytes );
/* release an extract frame (see FT_Stream_ExtractFrame) */
FT_BASE( void )
FT_Stream_ReleaseFrame( FT_Stream stream,
FT_Byte** pbytes );
/* read a byte from an entered frame */
FT_BASE( FT_Char )
FT_Stream_GetChar( FT_Stream stream );
/* read a 16-bit big-endian unsigned integer from an entered frame */
FT_BASE( FT_UShort )
FT_Stream_GetUShort( FT_Stream stream );
/* read a 24-bit big-endian unsigned integer from an entered frame */
FT_BASE( FT_ULong )
FT_Stream_GetUOffset( FT_Stream stream );
/* read a 32-bit big-endian unsigned integer from an entered frame */
FT_BASE( FT_ULong )
FT_Stream_GetULong( FT_Stream stream );
/* read a 16-bit little-endian unsigned integer from an entered frame */
FT_BASE( FT_UShort )
FT_Stream_GetUShortLE( FT_Stream stream );
/* read a 32-bit little-endian unsigned integer from an entered frame */
FT_BASE( FT_ULong )
FT_Stream_GetULongLE( FT_Stream stream );
/* read a byte from a stream */
FT_BASE( FT_Char )
FT_Stream_ReadChar( FT_Stream stream,
FT_Error* error );
/* read a 16-bit big-endian unsigned integer from a stream */
FT_BASE( FT_UShort )
FT_Stream_ReadUShort( FT_Stream stream,
FT_Error* error );
/* read a 24-bit big-endian unsigned integer from a stream */
FT_BASE( FT_ULong )
FT_Stream_ReadUOffset( FT_Stream stream,
FT_Error* error );
/* read a 32-bit big-endian integer from a stream */
FT_BASE( FT_ULong )
FT_Stream_ReadULong( FT_Stream stream,
FT_Error* error );
/* read a 16-bit little-endian unsigned integer from a stream */
FT_BASE( FT_UShort )
FT_Stream_ReadUShortLE( FT_Stream stream,
FT_Error* error );
/* read a 32-bit little-endian unsigned integer from a stream */
FT_BASE( FT_ULong )
FT_Stream_ReadULongLE( FT_Stream stream,
FT_Error* error );
/* Read a structure from a stream. The structure must be described */
/* by an array of FT_Frame_Field records. */
FT_BASE( FT_Error )
FT_Stream_ReadFields( FT_Stream stream,
const FT_Frame_Field* fields,
void* structure );
#define FT_STREAM_POS() \
FT_Stream_Pos( stream )
#define FT_STREAM_SEEK( position ) \
FT_SET_ERROR( FT_Stream_Seek( stream, position ) )
#define FT_STREAM_SKIP( distance ) \
FT_SET_ERROR( FT_Stream_Skip( stream, distance ) )
#define FT_STREAM_READ( buffer, count ) \
FT_SET_ERROR( FT_Stream_Read( stream, \
(FT_Byte*)buffer, \
count ) )
#define FT_STREAM_READ_AT( position, buffer, count ) \
FT_SET_ERROR( FT_Stream_ReadAt( stream, \
position, \
(FT_Byte*)buffer, \
count ) )
#define FT_STREAM_READ_FIELDS( fields, object ) \
FT_SET_ERROR( FT_Stream_ReadFields( stream, fields, object ) )
#define FT_FRAME_ENTER( size ) \
FT_SET_ERROR( \
FT_DEBUG_INNER( FT_Stream_EnterFrame( stream, size ) ) )
#define FT_FRAME_EXIT() \
FT_DEBUG_INNER( FT_Stream_ExitFrame( stream ) )
#define FT_FRAME_EXTRACT( size, bytes ) \
FT_SET_ERROR( \
FT_DEBUG_INNER( FT_Stream_ExtractFrame( stream, size, \
(FT_Byte**)&(bytes) ) ) )
#define FT_FRAME_RELEASE( bytes ) \
FT_DEBUG_INNER( FT_Stream_ReleaseFrame( stream, \
(FT_Byte**)&(bytes) ) )
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/*************************************************************************/
/* */
/* MEMORY MANAGEMENT INTERFACE */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* It is not necessary to do any error checking for the */
/* allocation-related functions. This will be done by the higher level */
/* routines like ft_mem_alloc() or ft_mem_realloc(). */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* ft_alloc */
/* */
/* <Description> */
/* The memory allocation function. */
/* */
/* <Input> */
/* memory :: A pointer to the memory object. */
/* */
/* size :: The requested size in bytes. */
/* */
/* <Return> */
/* The address of newly allocated block. */
/* */
FT_CALLBACK_DEF( void* )
ft_alloc( FT_Memory memory,
long size )
{
FT_UNUSED( memory );
return ft_smalloc( size );
}
/*************************************************************************/
/* */
/* <Function> */
/* ft_realloc */
/* */
/* <Description> */
/* The memory reallocation function. */
/* */
/* <Input> */
/* memory :: A pointer to the memory object. */
/* */
/* cur_size :: The current size of the allocated memory block. */
/* */
/* new_size :: The newly requested size in bytes. */
/* */
/* block :: The current address of the block in memory. */
/* */
/* <Return> */
/* The address of the reallocated memory block. */
/* */
FT_CALLBACK_DEF( void* )
ft_realloc( FT_Memory memory,
long cur_size,
long new_size,
void* block )
{
FT_UNUSED( memory );
FT_UNUSED( cur_size );
return ft_srealloc( block, new_size );
}
/*************************************************************************/
/* */
/* <Function> */
/* ft_free */
/* */
/* <Description> */
/* The memory release function. */
/* */
/* <Input> */
/* memory :: A pointer to the memory object. */
/* */
/* block :: The address of block in memory to be freed. */
/* */
FT_CALLBACK_DEF( void )
ft_free( FT_Memory memory,
void* block )
{
FT_UNUSED( memory );
ft_sfree( block );
}
/*************************************************************************/
/* */
/* RESOURCE MANAGEMENT INTERFACE */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_io
/* We use the macro STREAM_FILE for convenience to extract the */
/* system-specific stream handle from a given FreeType stream object */
#define STREAM_FILE( stream ) ( (FT_FILE*)stream->descriptor.pointer )
/*************************************************************************/
/* */
/* <Function> */
/* ft_ansi_stream_close */
/* */
/* <Description> */
/* The function to close a stream. */
/* */
/* <Input> */
/* stream :: A pointer to the stream object. */
/* */
FT_CALLBACK_DEF( void )
ft_ansi_stream_close( FT_Stream stream )
{
ft_fclose( STREAM_FILE( stream ) );
stream->descriptor.pointer = NULL;
stream->size = 0;
stream->base = 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* ft_ansi_stream_io */
/* */
/* <Description> */
/* The function to open a stream. */
/* */
/* <Input> */
/* stream :: A pointer to the stream object. */
/* */
/* offset :: The position in the data stream to start reading. */
/* */
/* buffer :: The address of buffer to store the read data. */
/* */
/* count :: The number of bytes to read from the stream. */
/* */
/* <Return> */
/* The number of bytes actually read. If `count' is zero (this is, */
/* the function is used for seeking), a non-zero return value */
/* indicates an error. */
/* */
FT_CALLBACK_DEF( unsigned long )
ft_ansi_stream_io( FT_Stream stream,
unsigned long offset,
unsigned char* buffer,
unsigned long count )
{
FT_FILE* file;
if ( !count && offset > stream->size )
return 1;
file = STREAM_FILE( stream );
if ( stream->pos != offset )
ft_fseek( file, offset, SEEK_SET );
return (unsigned long)ft_fread( buffer, 1, count, file );
}
/* documentation is in ftstream.h */
FT_BASE_DEF( FT_Error )
FT_Stream_Open( FT_Stream stream,
const char* filepathname )
{
FT_FILE* file;
if ( !stream )
return FT_Err_Invalid_Stream_Handle;
stream->descriptor.pointer = NULL;
stream->pathname.pointer = (char*)filepathname;
stream->base = 0;
stream->pos = 0;
stream->read = NULL;
stream->close = NULL;
file = ft_fopen( filepathname, "rb" );
if ( !file )
{
FT_ERROR(( "FT_Stream_Open:"
" could not open `%s'\n", filepathname ));
return FT_Err_Cannot_Open_Resource;
}
ft_fseek( file, 0, SEEK_END );
stream->size = ft_ftell( file );
if ( !stream->size )
{
FT_ERROR(( "FT_Stream_Open:" ));
FT_ERROR(( " opened `%s' but zero-sized\n", filepathname ));
ft_fclose( file );
return FT_Err_Cannot_Open_Stream;
}
ft_fseek( file, 0, SEEK_SET );
stream->descriptor.pointer = file;
stream->read = ft_ansi_stream_io;
stream->close = ft_ansi_stream_close;
FT_TRACE1(( "FT_Stream_Open:" ));
FT_TRACE1(( " opened `%s' (%d bytes) successfully\n",
filepathname, stream->size ));
return FT_Err_Ok;
}
/* documentation is in ftobjs.h */
FT_BASE_DEF( FT_Memory )
FT_New_Memory( void )
{
FT_Memory memory;
memory = (FT_Memory)ft_smalloc( sizeof ( *memory ) );
if ( memory )
{
memory->user = 0;
memory->alloc = ft_alloc;
memory->realloc = ft_realloc;
memory->free = ft_free;
}
return memory;
}
/* documentation is in ftobjs.h */
FT_BASE_DEF( void )
FT_Done_Memory( FT_Memory memory )
{
ft_sfree( memory );
}
/* END */
/***************************************************************************/
/* */
/* ftinit.c */
/* */
/* FreeType initialization layer (body). */
/* */
/* Copyright 1996-2002, 2005, 2007, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The purpose of this file is to implement the following two */
/* functions: */
/* */
/* FT_Add_Default_Modules(): */
/* This function is used to add the set of default modules to a */
/* fresh new library object. The set is taken from the header file */
/* `freetype/config/ftmodule.h'. See the document `FreeType 2.0 */
/* Build System' for more information. */
/* */
/* FT_Init_FreeType(): */
/* This function creates a system object for the current platform, */
/* builds a library out of it, then calls FT_Default_Drivers(). */
/* */
/* Note that even if FT_Init_FreeType() uses the implementation of the */
/* system object defined at build time, client applications are still */
/* able to provide their own `ftsystem.c'. */
/* */
/*************************************************************************/
/***************************************************************************/
/* */
/* basepic.h */
/* */
/* The FreeType position independent code services for base. */
/* */
/* Copyright 2009 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __BASEPIC_H__
FT_BEGIN_HEADER
#define FT_OUTLINE_GLYPH_CLASS_GET &ft_outline_glyph_class
#define FT_BITMAP_GLYPH_CLASS_GET &ft_bitmap_glyph_class
#define FT_DEFAULT_MODULES_GET ft_default_modules
#define FT_RACCESS_GUESS_TABLE_GET ft_raccess_guess_table
/* */
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_init
#undef FT_USE_MODULE
#ifdef __cplusplus
#define FT_USE_MODULE( type, x ) extern "C" const type x;
#else
#define FT_USE_MODULE( type, x ) extern const type x;
#endif
/*
* This file registers the FreeType modules compiled into the library.
*
* If you use GNU make, this file IS NOT USED! Instead, it is created in
* the objects directory (normally `<topdir>/objs/') based on information
* from `<topdir>/modules.cfg'.
*
* Please read `docs/INSTALL.ANY' and `docs/CUSTOMIZE' how to compile
* FreeType without GNU make.
*
*/
FT_USE_MODULE( FT_Module_Class, autofit_module_class )
FT_USE_MODULE( FT_Driver_ClassRec, tt_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, t1_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, cff_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, t1cid_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, pfr_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, t42_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, winfnt_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, pcf_driver_class )
FT_USE_MODULE( FT_Module_Class, psaux_module_class )
FT_USE_MODULE( FT_Module_Class, psnames_module_class )
FT_USE_MODULE( FT_Module_Class, pshinter_module_class )
FT_USE_MODULE( FT_Renderer_Class, ft_raster1_renderer_class )
FT_USE_MODULE( FT_Module_Class, sfnt_module_class )
FT_USE_MODULE( FT_Renderer_Class, ft_smooth_renderer_class )
FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcd_renderer_class )
FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcdv_renderer_class )
FT_USE_MODULE( FT_Driver_ClassRec, bdf_driver_class )
/* EOF */
#undef FT_USE_MODULE
#define FT_USE_MODULE( type, x ) (const FT_Module_Class*)&(x),
static
const FT_Module_Class* const ft_default_modules[] =
{
/*
* This file registers the FreeType modules compiled into the library.
*
* If you use GNU make, this file IS NOT USED! Instead, it is created in
* the objects directory (normally `<topdir>/objs/') based on information
* from `<topdir>/modules.cfg'.
*
* Please read `docs/INSTALL.ANY' and `docs/CUSTOMIZE' how to compile
* FreeType without GNU make.
*
*/
FT_USE_MODULE( FT_Module_Class, autofit_module_class )
FT_USE_MODULE( FT_Driver_ClassRec, tt_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, t1_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, cff_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, t1cid_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, pfr_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, t42_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, winfnt_driver_class )
FT_USE_MODULE( FT_Driver_ClassRec, pcf_driver_class )
FT_USE_MODULE( FT_Module_Class, psaux_module_class )
FT_USE_MODULE( FT_Module_Class, psnames_module_class )
FT_USE_MODULE( FT_Module_Class, pshinter_module_class )
FT_USE_MODULE( FT_Renderer_Class, ft_raster1_renderer_class )
FT_USE_MODULE( FT_Module_Class, sfnt_module_class )
FT_USE_MODULE( FT_Renderer_Class, ft_smooth_renderer_class )
FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcd_renderer_class )
FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcdv_renderer_class )
FT_USE_MODULE( FT_Driver_ClassRec, bdf_driver_class )
/* EOF */
0
};
/* documentation is in ftmodapi.h */
FT_EXPORT_DEF( void )
FT_Add_Default_Modules( FT_Library library )
{
FT_Error error;
const FT_Module_Class* const* cur;
/* FT_DEFAULT_MODULES_GET dereferences `library' in PIC mode */
/* GCC 4.6 warns the type difference:
* FT_Module_Class** != const FT_Module_Class* const*
*/
cur = (const FT_Module_Class* const*)FT_DEFAULT_MODULES_GET;
/* test for valid `library' delayed to FT_Add_Module() */
while ( *cur )
{
error = FT_Add_Module( library, *cur );
/* notify errors, but don't stop */
if ( error )
FT_TRACE0(( "FT_Add_Default_Module:"
" Cannot install `%s', error = 0x%x\n",
(*cur)->module_name, error ));
cur++;
}
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Init_FreeType( FT_Library *alibrary )
{
FT_Error error;
FT_Memory memory;
/* First of all, allocate a new system object -- this function is part */
/* of the system-specific component, i.e. `ftsystem.c'. */
memory = FT_New_Memory();
if ( !memory )
{
FT_ERROR(( "FT_Init_FreeType: cannot find memory manager\n" ));
return FT_Err_Unimplemented_Feature;
}
/* build a library out of it, then fill it with the set of */
/* default drivers. */
error = FT_New_Library( memory, alibrary );
if ( error )
FT_Done_Memory( memory );
else
FT_Add_Default_Modules( *alibrary );
return error;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Done_FreeType( FT_Library library )
{
if ( library )
{
FT_Memory memory = library->memory;
/* Discard the library object */
FT_Done_Library( library );
/* discard memory manager */
FT_Done_Memory( memory );
}
return FT_Err_Ok;
}
/* END */
/***************************************************************************/
/* */
/* ftdebug.c */
/* */
/* Debugging and logging component (body). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This component contains various macros and functions used to ease the */
/* debugging of the FreeType engine. Its main purpose is in assertion */
/* checking, tracing, and error detection. */
/* */
/* There are now three debugging modes: */
/* */
/* - trace mode */
/* */
/* Error and trace messages are sent to the log file (which can be the */
/* standard error output). */
/* */
/* - error mode */
/* */
/* Only error messages are generated. */
/* */
/* - release mode: */
/* */
/* No error message is sent or generated. The code is free from any */
/* debugging parts. */
/* */
/*************************************************************************/
FT_BASE_DEF( void )
ft_debug_init( void )
{
/* nothing */
}
FT_BASE_DEF( FT_Int )
FT_Trace_Get_Count( void )
{
return 0;
}
FT_BASE_DEF( const char * )
FT_Trace_Get_Name( FT_Int idx )
{
FT_UNUSED( idx );
return NULL;
}
/* END */
/***************************************************************************/
/* */
/* ftbase.c */
/* */
/* Single object library component (body only). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2006, 2007, 2008, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* ftpic.c */
/* */
/* The FreeType position independent code services (body). */
/* */
/* Copyright 2009 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* END */
/***************************************************************************/
/* */
/* basepic.c */
/* */
/* The FreeType position independent code services for base. */
/* */
/* Copyright 2009, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* END */
/***************************************************************************/
/* */
/* ftadvanc.c */
/* */
/* Quick computation of advance widths (body). */
/* */
/* Copyright 2008, 2009, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftadvanc.h */
/* */
/* Quick computation of advance widths (specification only). */
/* */
/* Copyright 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTADVANC_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/**************************************************************************
*
* @section:
* quick_advance
*
* @title:
* Quick retrieval of advance values
*
* @abstract:
* Retrieve horizontal and vertical advance values without processing
* glyph outlines, if possible.
*
* @description:
* This section contains functions to quickly extract advance values
* without handling glyph outlines, if possible.
*/
/*************************************************************************/
/* */
/* <Const> */
/* FT_ADVANCE_FLAG_FAST_ONLY */
/* */
/* <Description> */
/* A bit-flag to be OR-ed with the `flags' parameter of the */
/* @FT_Get_Advance and @FT_Get_Advances functions. */
/* */
/* If set, it indicates that you want these functions to fail if the */
/* corresponding hinting mode or font driver doesn't allow for very */
/* quick advance computation. */
/* */
/* Typically, glyphs which are either unscaled, unhinted, bitmapped, */
/* or light-hinted can have their advance width computed very */
/* quickly. */
/* */
/* Normal and bytecode hinted modes, which require loading, scaling, */
/* and hinting of the glyph outline, are extremely slow by */
/* comparison. */
/* */
#define FT_ADVANCE_FLAG_FAST_ONLY 0x20000000UL
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Advance */
/* */
/* <Description> */
/* Retrieve the advance value of a given glyph outline in an */
/* @FT_Face. By default, the unhinted advance is returned in font */
/* units. */
/* */
/* <Input> */
/* face :: The source @FT_Face handle. */
/* */
/* gindex :: The glyph index. */
/* */
/* load_flags :: A set of bit flags similar to those used when */
/* calling @FT_Load_Glyph, used to determine what kind */
/* of advances you need. */
/* <Output> */
/* padvance :: The advance value, in either font units or 16.16 */
/* format. */
/* */
/* If @FT_LOAD_VERTICAL_LAYOUT is set, this is the */
/* vertical advance corresponding to a vertical layout. */
/* Otherwise, it is the horizontal advance in a */
/* horizontal layout. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and */
/* if the corresponding font backend doesn't have a quick way to */
/* retrieve the advances. */
/* */
/* A scaled advance is returned in 16.16 format but isn't transformed */
/* by the affine transformation specified by @FT_Set_Transform. */
/* */
FT_EXPORT( FT_Error )
FT_Get_Advance( FT_Face face,
FT_UInt gindex,
FT_Int32 load_flags,
FT_Fixed *padvance );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Advances */
/* */
/* <Description> */
/* Retrieve the advance values of several glyph outlines in an */
/* @FT_Face. By default, the unhinted advances are returned in font */
/* units. */
/* */
/* <Input> */
/* face :: The source @FT_Face handle. */
/* */
/* start :: The first glyph index. */
/* */
/* count :: The number of advance values you want to retrieve. */
/* */
/* load_flags :: A set of bit flags similar to those used when */
/* calling @FT_Load_Glyph. */
/* */
/* <Output> */
/* padvance :: The advances, in either font units or 16.16 format. */
/* This array must contain at least `count' elements. */
/* */
/* If @FT_LOAD_VERTICAL_LAYOUT is set, these are the */
/* vertical advances corresponding to a vertical layout. */
/* Otherwise, they are the horizontal advances in a */
/* horizontal layout. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and */
/* if the corresponding font backend doesn't have a quick way to */
/* retrieve the advances. */
/* */
/* Scaled advances are returned in 16.16 format but aren't */
/* transformed by the affine transformation specified by */
/* @FT_Set_Transform. */
/* */
FT_EXPORT( FT_Error )
FT_Get_Advances( FT_Face face,
FT_UInt start,
FT_UInt count,
FT_Int32 load_flags,
FT_Fixed *padvances );
/* */
FT_END_HEADER
/* END */
static FT_Error
_ft_face_scale_advances( FT_Face face,
FT_Fixed* advances,
FT_UInt count,
FT_Int32 flags )
{
FT_Fixed scale;
FT_UInt nn;
if ( flags & FT_LOAD_NO_SCALE )
return FT_Err_Ok;
if ( face->size == NULL )
return FT_Err_Invalid_Size_Handle;
if ( flags & FT_LOAD_VERTICAL_LAYOUT )
scale = face->size->metrics.y_scale;
else
scale = face->size->metrics.x_scale;
/* this must be the same scaling as to get linear{Hori,Vert}Advance */
/* (see `FT_Load_Glyph' implementation in src/base/ftobjs.c) */
for ( nn = 0; nn < count; nn++ )
advances[nn] = FT_MulDiv( advances[nn], scale, 64 );
return FT_Err_Ok;
}
/* at the moment, we can perform fast advance retrieval only in */
/* the following cases: */
/* */
/* - unscaled load */
/* - unhinted load */
/* - light-hinted load */
#define LOAD_ADVANCE_FAST_CHECK( flags ) \
( flags & ( FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING ) || \
FT_LOAD_TARGET_MODE( flags ) == FT_RENDER_MODE_LIGHT )
/* documentation is in ftadvanc.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_Advance( FT_Face face,
FT_UInt gindex,
FT_Int32 flags,
FT_Fixed *padvance )
{
FT_Face_GetAdvancesFunc func;
if ( !face )
return FT_Err_Invalid_Face_Handle;
if ( gindex >= (FT_UInt)face->num_glyphs )
return FT_Err_Invalid_Glyph_Index;
func = face->driver->clazz->get_advances;
if ( func && LOAD_ADVANCE_FAST_CHECK( flags ) )
{
FT_Error error;
error = func( face, gindex, 1, flags, padvance );
if ( !error )
return _ft_face_scale_advances( face, padvance, 1, flags );
if ( error != FT_ERROR_BASE( FT_Err_Unimplemented_Feature ) )
return error;
}
return FT_Get_Advances( face, gindex, 1, flags, padvance );
}
/* documentation is in ftadvanc.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_Advances( FT_Face face,
FT_UInt start,
FT_UInt count,
FT_Int32 flags,
FT_Fixed *padvances )
{
FT_Face_GetAdvancesFunc func;
FT_UInt num, end, nn;
FT_Error error = FT_Err_Ok;
if ( !face )
return FT_Err_Invalid_Face_Handle;
num = (FT_UInt)face->num_glyphs;
end = start + count;
if ( start >= num || end < start || end > num )
return FT_Err_Invalid_Glyph_Index;
if ( count == 0 )
return FT_Err_Ok;
func = face->driver->clazz->get_advances;
if ( func && LOAD_ADVANCE_FAST_CHECK( flags ) )
{
error = func( face, start, count, flags, padvances );
if ( !error )
return _ft_face_scale_advances( face, padvances, count, flags );
if ( error != FT_ERROR_BASE( FT_Err_Unimplemented_Feature ) )
return error;
}
error = FT_Err_Ok;
if ( flags & FT_ADVANCE_FLAG_FAST_ONLY )
return FT_Err_Unimplemented_Feature;
flags |= (FT_UInt32)FT_LOAD_ADVANCE_ONLY;
for ( nn = 0; nn < count; nn++ )
{
error = FT_Load_Glyph( face, start + nn, flags );
if ( error )
break;
/* scale from 26.6 to 16.16 */
padvances[nn] = ( flags & FT_LOAD_VERTICAL_LAYOUT )
? face->glyph->advance.y << 10
: face->glyph->advance.x << 10;
}
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftcalc.c */
/* */
/* Arithmetic computations (body). */
/* */
/* Copyright 1996-2006, 2008, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* Support for 1-complement arithmetic has been totally dropped in this */
/* release. You can still write your own code if you need it. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* Implementing basic computation routines. */
/* */
/* FT_MulDiv(), FT_MulFix(), FT_DivFix(), FT_RoundFix(), FT_CeilFix(), */
/* and FT_FloorFix() are declared in freetype.h. */
/* */
/*************************************************************************/
/***************************************************************************/
/* */
/* ftcalc.h */
/* */
/* Arithmetic computations (specification). */
/* */
/* Copyright 1996-2006, 2008, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTCALC_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Function> */
/* FT_FixedSqrt */
/* */
/* <Description> */
/* Computes the square root of a 16.16 fixed point value. */
/* */
/* <Input> */
/* x :: The value to compute the root for. */
/* */
/* <Return> */
/* The result of `sqrt(x)'. */
/* */
/* <Note> */
/* This function is not very fast. */
/* */
FT_BASE( FT_Int32 )
FT_SqrtFixed( FT_Int32 x );
/*************************************************************************/
/* */
/* FT_MulDiv() and FT_MulFix() are declared in freetype.h. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_MulDiv_No_Round */
/* */
/* <Description> */
/* A very simple function used to perform the computation `(a*b)/c' */
/* (without rounding) with maximum accuracy (it uses a 64-bit */
/* intermediate integer whenever necessary). */
/* */
/* This function isn't necessarily as fast as some processor specific */
/* operations, but is at least completely portable. */
/* */
/* <Input> */
/* a :: The first multiplier. */
/* b :: The second multiplier. */
/* c :: The divisor. */
/* */
/* <Return> */
/* The result of `(a*b)/c'. This function never traps when trying to */
/* divide by zero; it simply returns `MaxInt' or `MinInt' depending */
/* on the signs of `a' and `b'. */
/* */
FT_BASE( FT_Long )
FT_MulDiv_No_Round( FT_Long a,
FT_Long b,
FT_Long c );
/*
* A variant of FT_Matrix_Multiply which scales its result afterwards.
* The idea is that both `a' and `b' are scaled by factors of 10 so that
* the values are as precise as possible to get a correct result during
* the 64bit multiplication. Let `sa' and `sb' be the scaling factors of
* `a' and `b', respectively, then the scaling factor of the result is
* `sa*sb'.
*/
FT_BASE( void )
FT_Matrix_Multiply_Scaled( const FT_Matrix* a,
FT_Matrix *b,
FT_Long scaling );
/*
* A variant of FT_Vector_Transform. See comments for
* FT_Matrix_Multiply_Scaled.
*/
FT_BASE( void )
FT_Vector_Transform_Scaled( FT_Vector* vector,
const FT_Matrix* matrix,
FT_Long scaling );
/*
* Return -1, 0, or +1, depending on the orientation of a given corner.
* We use the Cartesian coordinate system, with positive vertical values
* going upwards. The function returns +1 if the corner turns to the
* left, -1 to the right, and 0 for undecidable cases.
*/
FT_BASE( FT_Int )
ft_corner_orientation( FT_Pos in_x,
FT_Pos in_y,
FT_Pos out_x,
FT_Pos out_y );
/*
* Return TRUE if a corner is flat or nearly flat. This is equivalent to
* saying that the angle difference between the `in' and `out' vectors is
* very small.
*/
FT_BASE( FT_Int )
ft_corner_is_flat( FT_Pos in_x,
FT_Pos in_y,
FT_Pos out_x,
FT_Pos out_y );
#define INT_TO_F26DOT6( x ) ( (FT_Long)(x) << 6 )
#define INT_TO_F2DOT14( x ) ( (FT_Long)(x) << 14 )
#define INT_TO_FIXED( x ) ( (FT_Long)(x) << 16 )
#define F2DOT14_TO_FIXED( x ) ( (FT_Long)(x) << 2 )
#define FLOAT_TO_FIXED( x ) ( (FT_Long)( x * 65536.0 ) )
#define FIXED_TO_INT( x ) ( FT_RoundFix( x ) >> 16 )
#define ROUND_F26DOT6( x ) ( x >= 0 ? ( ( (x) + 32 ) & -64 ) \
: ( -( ( 32 - (x) ) & -64 ) ) )
FT_END_HEADER
/* END */
#ifdef FT_MULFIX_INLINED
#undef FT_MulFix
#endif
/* we need to define a 64-bits data type here */
#ifdef FT_LONG64
typedef FT_INT64 FT_Int64;
#else
typedef struct FT_Int64_
{
FT_UInt32 lo;
FT_UInt32 hi;
} FT_Int64;
/* FT_LONG64 */
#endif
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_calc
/* The following three functions are available regardless of whether */
/* FT_LONG64 is defined. */
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Fixed )
FT_RoundFix( FT_Fixed a )
{
return ( a >= 0 ) ? ( a + 0x8000L ) & ~0xFFFFL
: -((-a + 0x8000L ) & ~0xFFFFL );
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Fixed )
FT_CeilFix( FT_Fixed a )
{
return ( a >= 0 ) ? ( a + 0xFFFFL ) & ~0xFFFFL
: -((-a + 0xFFFFL ) & ~0xFFFFL );
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Fixed )
FT_FloorFix( FT_Fixed a )
{
return ( a >= 0 ) ? a & ~0xFFFFL
: -((-a) & ~0xFFFFL );
}
#ifdef FT_LONG64
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Long )
FT_MulDiv( FT_Long a,
FT_Long b,
FT_Long c )
{
FT_Int s;
FT_Long d;
s = 1;
if ( a < 0 ) { a = -a; s = -1; }
if ( b < 0 ) { b = -b; s = -s; }
if ( c < 0 ) { c = -c; s = -s; }
d = (FT_Long)( c > 0 ? ( (FT_Int64)a * b + ( c >> 1 ) ) / c
: 0x7FFFFFFFL );
return ( s > 0 ) ? d : -d;
}
/* documentation is in ftcalc.h */
FT_BASE_DEF( FT_Long )
FT_MulDiv_No_Round( FT_Long a,
FT_Long b,
FT_Long c )
{
FT_Int s;
FT_Long d;
s = 1;
if ( a < 0 ) { a = -a; s = -1; }
if ( b < 0 ) { b = -b; s = -s; }
if ( c < 0 ) { c = -c; s = -s; }
d = (FT_Long)( c > 0 ? (FT_Int64)a * b / c
: 0x7FFFFFFFL );
return ( s > 0 ) ? d : -d;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Long )
FT_MulFix( FT_Long a,
FT_Long b )
{
#ifdef FT_MULFIX_ASSEMBLER
return FT_MULFIX_ASSEMBLER( a, b );
#else
FT_Int s = 1;
FT_Long c;
if ( a < 0 )
{
a = -a;
s = -1;
}
if ( b < 0 )
{
b = -b;
s = -s;
}
c = (FT_Long)( ( (FT_Int64)a * b + 0x8000L ) >> 16 );
return ( s > 0 ) ? c : -c;
/* FT_MULFIX_ASSEMBLER */
#endif
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Long )
FT_DivFix( FT_Long a,
FT_Long b )
{
FT_Int32 s;
FT_UInt32 q;
s = 1;
if ( a < 0 ) { a = -a; s = -1; }
if ( b < 0 ) { b = -b; s = -s; }
if ( b == 0 )
/* check for division by 0 */
q = 0x7FFFFFFFL;
else
/* compute result directly */
q = (FT_UInt32)( ( ( (FT_Int64)a << 16 ) + ( b >> 1 ) ) / b );
return ( s < 0 ? -(FT_Long)q : (FT_Long)q );
}
/* !FT_LONG64 */
#else
static void
ft_multo64( FT_UInt32 x,
FT_UInt32 y,
FT_Int64 *z )
{
FT_UInt32 lo1, hi1, lo2, hi2, lo, hi, i1, i2;
lo1 = x & 0x0000FFFFU; hi1 = x >> 16;
lo2 = y & 0x0000FFFFU; hi2 = y >> 16;
lo = lo1 * lo2;
i1 = lo1 * hi2;
i2 = lo2 * hi1;
hi = hi1 * hi2;
/* Check carry overflow of i1 + i2 */
i1 += i2;
hi += (FT_UInt32)( i1 < i2 ) << 16;
hi += i1 >> 16;
i1 = i1 << 16;
/* Check carry overflow of i1 + lo */
lo += i1;
hi += ( lo < i1 );
z->lo = lo;
z->hi = hi;
}
static FT_UInt32
ft_div64by32( FT_UInt32 hi,
FT_UInt32 lo,
FT_UInt32 y )
{
FT_UInt32 r, q;
FT_Int i;
q = 0;
r = hi;
if ( r >= y )
return (FT_UInt32)0x7FFFFFFFL;
i = 32;
do
{
r <<= 1;
q <<= 1;
r |= lo >> 31;
if ( r >= y )
{
r -= y;
q |= 1;
}
lo <<= 1;
} while ( --i );
return q;
}
static void
FT_Add64( FT_Int64* x,
FT_Int64* y,
FT_Int64 *z )
{
register FT_UInt32 lo, hi;
lo = x->lo + y->lo;
hi = x->hi + y->hi + ( lo < x->lo );
z->lo = lo;
z->hi = hi;
}
/* documentation is in freetype.h */
/* The FT_MulDiv function has been optimized thanks to ideas from */
/* Graham Asher. The trick is to optimize computation when everything */
/* fits within 32-bits (a rather common case). */
/* */
/* we compute 'a*b+c/2', then divide it by 'c'. (positive values) */
/* */
/* 46340 is FLOOR(SQRT(2^31-1)). */
/* */
/* if ( a <= 46340 && b <= 46340 ) then ( a*b <= 0x7FFEA810 ) */
/* */
/* 0x7FFFFFFF - 0x7FFEA810 = 0x157F0 */
/* */
/* if ( c < 0x157F0*2 ) then ( a*b+c/2 <= 0x7FFFFFFF ) */
/* */
/* and 2*0x157F0 = 176096 */
/* */
FT_EXPORT_DEF( FT_Long )
FT_MulDiv( FT_Long a,
FT_Long b,
FT_Long c )
{
long s;
/* XXX: this function does not allow 64-bit arguments */
if ( a == 0 || b == c )
return a;
s = a; a = FT_ABS( a );
s ^= b; b = FT_ABS( b );
s ^= c; c = FT_ABS( c );
if ( a <= 46340L && b <= 46340L && c <= 176095L && c > 0 )
a = ( a * b + ( c >> 1 ) ) / c;
else if ( (FT_Int32)c > 0 )
{
FT_Int64 temp, temp2;
ft_multo64( (FT_Int32)a, (FT_Int32)b, &temp );
temp2.hi = 0;
temp2.lo = (FT_UInt32)(c >> 1);
FT_Add64( &temp, &temp2, &temp );
a = ft_div64by32( temp.hi, temp.lo, (FT_Int32)c );
}
else
a = 0x7FFFFFFFL;
return ( s < 0 ? -a : a );
}
FT_BASE_DEF( FT_Long )
FT_MulDiv_No_Round( FT_Long a,
FT_Long b,
FT_Long c )
{
long s;
if ( a == 0 || b == c )
return a;
s = a; a = FT_ABS( a );
s ^= b; b = FT_ABS( b );
s ^= c; c = FT_ABS( c );
if ( a <= 46340L && b <= 46340L && c > 0 )
a = a * b / c;
else if ( (FT_Int32)c > 0 )
{
FT_Int64 temp;
ft_multo64( (FT_Int32)a, (FT_Int32)b, &temp );
a = ft_div64by32( temp.hi, temp.lo, (FT_Int32)c );
}
else
a = 0x7FFFFFFFL;
return ( s < 0 ? -a : a );
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Long )
FT_MulFix( FT_Long a,
FT_Long b )
{
#ifdef FT_MULFIX_ASSEMBLER
return FT_MULFIX_ASSEMBLER( a, b );
#elif 0
/*
* This code is nonportable. See comment below.
*
* However, on a platform where right-shift of a signed quantity fills
* the leftmost bits by copying the sign bit, it might be faster.
*/
FT_Long sa, sb;
FT_ULong ua, ub;
if ( a == 0 || b == 0x10000L )
return a;
/*
* This is a clever way of converting a signed number `a' into its
* absolute value (stored back into `a') and its sign. The sign is
* stored in `sa'; 0 means `a' was positive or zero, and -1 means `a'
* was negative. (Similarly for `b' and `sb').
*
* Unfortunately, it doesn't work (at least not portably).
*
* It makes the assumption that right-shift on a negative signed value
* fills the leftmost bits by copying the sign bit. This is wrong.
* According to K&R 2nd ed, section `A7.8 Shift Operators' on page 206,
* the result of right-shift of a negative signed value is
* implementation-defined. At least one implementation fills the
* leftmost bits with 0s (i.e., it is exactly the same as an unsigned
* right shift). This means that when `a' is negative, `sa' ends up
* with the value 1 rather than -1. After that, everything else goes
* wrong.
*/
sa = ( a >> ( sizeof ( a ) * 8 - 1 ) );
a = ( a ^ sa ) - sa;
sb = ( b >> ( sizeof ( b ) * 8 - 1 ) );
b = ( b ^ sb ) - sb;
ua = (FT_ULong)a;
ub = (FT_ULong)b;
if ( ua <= 2048 && ub <= 1048576L )
ua = ( ua * ub + 0x8000U ) >> 16;
else
{
FT_ULong al = ua & 0xFFFFU;
ua = ( ua >> 16 ) * ub + al * ( ub >> 16 ) +
( ( al * ( ub & 0xFFFFU ) + 0x8000U ) >> 16 );
}
sa ^= sb,
ua = (FT_ULong)(( ua ^ sa ) - sa);
return (FT_Long)ua;
/* 0 */
#else
FT_Long s;
FT_ULong ua, ub;
if ( a == 0 || b == 0x10000L )
return a;
s = a; a = FT_ABS( a );
s ^= b; b = FT_ABS( b );
ua = (FT_ULong)a;
ub = (FT_ULong)b;
if ( ua <= 2048 && ub <= 1048576L )
ua = ( ua * ub + 0x8000UL ) >> 16;
else
{
FT_ULong al = ua & 0xFFFFUL;
ua = ( ua >> 16 ) * ub + al * ( ub >> 16 ) +
( ( al * ( ub & 0xFFFFUL ) + 0x8000UL ) >> 16 );
}
return ( s < 0 ? -(FT_Long)ua : (FT_Long)ua );
/* 0 */
#endif
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Long )
FT_DivFix( FT_Long a,
FT_Long b )
{
FT_Int32 s;
FT_UInt32 q;
/* XXX: this function does not allow 64-bit arguments */
s = (FT_Int32)a; a = FT_ABS( a );
s ^= (FT_Int32)b; b = FT_ABS( b );
if ( (FT_UInt32)b == 0 )
{
/* check for division by 0 */
q = (FT_UInt32)0x7FFFFFFFL;
}
else if ( ( a >> 16 ) == 0 )
{
/* compute result directly */
q = (FT_UInt32)( ( a << 16 ) + ( b >> 1 ) ) / (FT_UInt32)b;
}
else
{
/* we need more bits; we have to do it by hand */
FT_Int64 temp, temp2;
temp.hi = (FT_Int32) ( a >> 16 );
temp.lo = (FT_UInt32)( a << 16 );
temp2.hi = 0;
temp2.lo = (FT_UInt32)( b >> 1 );
FT_Add64( &temp, &temp2, &temp );
q = ft_div64by32( temp.hi, temp.lo, (FT_Int32)b );
}
return ( s < 0 ? -(FT_Int32)q : (FT_Int32)q );
}
#if 0
/* documentation is in ftcalc.h */
FT_EXPORT_DEF( void )
FT_MulTo64( FT_Int32 x,
FT_Int32 y,
FT_Int64 *z )
{
FT_Int32 s;
s = x; x = FT_ABS( x );
s ^= y; y = FT_ABS( y );
ft_multo64( x, y, z );
if ( s < 0 )
{
z->lo = (FT_UInt32)-(FT_Int32)z->lo;
z->hi = ~z->hi + !( z->lo );
}
}
/* apparently, the second version of this code is not compiled correctly */
/* on Mac machines with the MPW C compiler.. tsk, tsk, tsk... */
#if 1
FT_EXPORT_DEF( FT_Int32 )
FT_Div64by32( FT_Int64* x,
FT_Int32 y )
{
FT_Int32 s;
FT_UInt32 q, r, i, lo;
s = x->hi;
if ( s < 0 )
{
x->lo = (FT_UInt32)-(FT_Int32)x->lo;
x->hi = ~x->hi + !x->lo;
}
s ^= y; y = FT_ABS( y );
/* Shortcut */
if ( x->hi == 0 )
{
if ( y > 0 )
q = x->lo / y;
else
q = 0x7FFFFFFFL;
return ( s < 0 ? -(FT_Int32)q : (FT_Int32)q );
}
r = x->hi;
lo = x->lo;
/* we know y is to be treated as unsigned here */
if ( r >= (FT_UInt32)y )
return ( s < 0 ? 0x80000001UL : 0x7FFFFFFFUL );
/* Return Max/Min Int32 if division overflow. */
/* This includes division by zero! */
q = 0;
for ( i = 0; i < 32; i++ )
{
r <<= 1;
q <<= 1;
r |= lo >> 31;
if ( r >= (FT_UInt32)y )
{
r -= y;
q |= 1;
}
lo <<= 1;
}
return ( s < 0 ? -(FT_Int32)q : (FT_Int32)q );
}
/* 0 */
#else
FT_EXPORT_DEF( FT_Int32 )
FT_Div64by32( FT_Int64* x,
FT_Int32 y )
{
FT_Int32 s;
FT_UInt32 q;
s = x->hi;
if ( s < 0 )
{
x->lo = (FT_UInt32)-(FT_Int32)x->lo;
x->hi = ~x->hi + !x->lo;
}
s ^= y; y = FT_ABS( y );
/* Shortcut */
if ( x->hi == 0 )
{
if ( y > 0 )
q = ( x->lo + ( y >> 1 ) ) / y;
else
q = 0x7FFFFFFFL;
return ( s < 0 ? -(FT_Int32)q : (FT_Int32)q );
}
q = ft_div64by32( x->hi, x->lo, y );
return ( s < 0 ? -(FT_Int32)q : (FT_Int32)q );
}
/* 0 */
#endif
/* 0 */
#endif
/* FT_LONG64 */
#endif
/* documentation is in ftglyph.h */
FT_EXPORT_DEF( void )
FT_Matrix_Multiply( const FT_Matrix* a,
FT_Matrix *b )
{
FT_Fixed xx, xy, yx, yy;
if ( !a || !b )
return;
xx = FT_MulFix( a->xx, b->xx ) + FT_MulFix( a->xy, b->yx );
xy = FT_MulFix( a->xx, b->xy ) + FT_MulFix( a->xy, b->yy );
yx = FT_MulFix( a->yx, b->xx ) + FT_MulFix( a->yy, b->yx );
yy = FT_MulFix( a->yx, b->xy ) + FT_MulFix( a->yy, b->yy );
b->xx = xx; b->xy = xy;
b->yx = yx; b->yy = yy;
}
/* documentation is in ftglyph.h */
FT_EXPORT_DEF( FT_Error )
FT_Matrix_Invert( FT_Matrix* matrix )
{
FT_Pos delta, xx, yy;
if ( !matrix )
return FT_Err_Invalid_Argument;
/* compute discriminant */
delta = FT_MulFix( matrix->xx, matrix->yy ) -
FT_MulFix( matrix->xy, matrix->yx );
if ( !delta )
/* matrix can't be inverted */
return FT_Err_Invalid_Argument;
matrix->xy = - FT_DivFix( matrix->xy, delta );
matrix->yx = - FT_DivFix( matrix->yx, delta );
xx = matrix->xx;
yy = matrix->yy;
matrix->xx = FT_DivFix( yy, delta );
matrix->yy = FT_DivFix( xx, delta );
return FT_Err_Ok;
}
/* documentation is in ftcalc.h */
FT_BASE_DEF( void )
FT_Matrix_Multiply_Scaled( const FT_Matrix* a,
FT_Matrix *b,
FT_Long scaling )
{
FT_Fixed xx, xy, yx, yy;
FT_Long val = 0x10000L * scaling;
if ( !a || !b )
return;
xx = FT_MulDiv( a->xx, b->xx, val ) + FT_MulDiv( a->xy, b->yx, val );
xy = FT_MulDiv( a->xx, b->xy, val ) + FT_MulDiv( a->xy, b->yy, val );
yx = FT_MulDiv( a->yx, b->xx, val ) + FT_MulDiv( a->yy, b->yx, val );
yy = FT_MulDiv( a->yx, b->xy, val ) + FT_MulDiv( a->yy, b->yy, val );
b->xx = xx; b->xy = xy;
b->yx = yx; b->yy = yy;
}
/* documentation is in ftcalc.h */
FT_BASE_DEF( void )
FT_Vector_Transform_Scaled( FT_Vector* vector,
const FT_Matrix* matrix,
FT_Long scaling )
{
FT_Pos xz, yz;
FT_Long val = 0x10000L * scaling;
if ( !vector || !matrix )
return;
xz = FT_MulDiv( vector->x, matrix->xx, val ) +
FT_MulDiv( vector->y, matrix->xy, val );
yz = FT_MulDiv( vector->x, matrix->yx, val ) +
FT_MulDiv( vector->y, matrix->yy, val );
vector->x = xz;
vector->y = yz;
}
/* documentation is in ftcalc.h */
FT_BASE_DEF( FT_Int32 )
FT_SqrtFixed( FT_Int32 x )
{
FT_UInt32 root, rem_hi, rem_lo, test_div;
FT_Int count;
root = 0;
if ( x > 0 )
{
rem_hi = 0;
rem_lo = x;
count = 24;
do
{
rem_hi = ( rem_hi << 2 ) | ( rem_lo >> 30 );
rem_lo <<= 2;
root <<= 1;
test_div = ( root << 1 ) + 1;
if ( rem_hi >= test_div )
{
rem_hi -= test_div;
root += 1;
}
} while ( --count );
}
return (FT_Int32)root;
}
/* documentation is in ftcalc.h */
FT_BASE_DEF( FT_Int )
ft_corner_orientation( FT_Pos in_x,
FT_Pos in_y,
FT_Pos out_x,
FT_Pos out_y )
{
/* avoid overflow on 16-bit system */
FT_Long result;
/* deal with the trivial cases quickly */
if ( in_y == 0 )
{
if ( in_x >= 0 )
result = out_y;
else
result = -out_y;
}
else if ( in_x == 0 )
{
if ( in_y >= 0 )
result = -out_x;
else
result = out_x;
}
else if ( out_y == 0 )
{
if ( out_x >= 0 )
result = in_y;
else
result = -in_y;
}
else if ( out_x == 0 )
{
if ( out_y >= 0 )
result = -in_x;
else
result = in_x;
}
/* general case */
else
{
#ifdef FT_LONG64
FT_Int64 delta = (FT_Int64)in_x * out_y - (FT_Int64)in_y * out_x;
if ( delta == 0 )
result = 0;
else
result = 1 - 2 * ( delta < 0 );
#else
FT_Int64 z1, z2;
/* XXX: this function does not allow 64-bit arguments */
ft_multo64( (FT_Int32)in_x, (FT_Int32)out_y, &z1 );
ft_multo64( (FT_Int32)in_y, (FT_Int32)out_x, &z2 );
if ( z1.hi > z2.hi )
result = +1;
else if ( z1.hi < z2.hi )
result = -1;
else if ( z1.lo > z2.lo )
result = +1;
else if ( z1.lo < z2.lo )
result = -1;
else
result = 0;
#endif
}
/* XXX: only the sign of return value, +1/0/-1 must be used */
return (FT_Int)result;
}
/* documentation is in ftcalc.h */
FT_BASE_DEF( FT_Int )
ft_corner_is_flat( FT_Pos in_x,
FT_Pos in_y,
FT_Pos out_x,
FT_Pos out_y )
{
FT_Pos ax = in_x;
FT_Pos ay = in_y;
FT_Pos d_in, d_out, d_corner;
if ( ax < 0 )
ax = -ax;
if ( ay < 0 )
ay = -ay;
d_in = ax + ay;
ax = out_x;
if ( ax < 0 )
ax = -ax;
ay = out_y;
if ( ay < 0 )
ay = -ay;
d_out = ax + ay;
ax = out_x + in_x;
if ( ax < 0 )
ax = -ax;
ay = out_y + in_y;
if ( ay < 0 )
ay = -ay;
d_corner = ax + ay;
return ( d_in + d_out - d_corner ) < ( d_corner >> 4 );
}
/* END */
/***************************************************************************/
/* */
/* ftdbgmem.c */
/* */
/* Memory debugger (body). */
/* */
/* Copyright 2001, 2002, 2003, 2004, 2005, 2006, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* ANSI C doesn't like empty source files */
typedef int _debug_mem_dummy;
/* END */
/***************************************************************************/
/* */
/* ftgloadr.c */
/* */
/* The FreeType glyph loader (body). */
/* */
/* Copyright 2002, 2003, 2004, 2005, 2006, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#undef FT_COMPONENT
#define FT_COMPONENT trace_gloader
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** *****/
/***** G L Y P H L O A D E R *****/
/***** *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* The glyph loader is a simple object which is used to load a set of */
/* glyphs easily. It is critical for the correct loading of composites. */
/* */
/* Ideally, one can see it as a stack of abstract `glyph' objects. */
/* */
/* loader.base Is really the bottom of the stack. It describes a */
/* single glyph image made of the juxtaposition of */
/* several glyphs (those `in the stack'). */
/* */
/* loader.current Describes the top of the stack, on which a new */
/* glyph can be loaded. */
/* */
/* Rewind Clears the stack. */
/* Prepare Set up `loader.current' for addition of a new glyph */
/* image. */
/* Add Add the `current' glyph image to the `base' one, */
/* and prepare for another one. */
/* */
/* The glyph loader is now a base object. Each driver used to */
/* re-implement it in one way or the other, which wasted code and */
/* energy. */
/* */
/*************************************************************************/
/* create a new glyph loader */
FT_BASE_DEF( FT_Error )
FT_GlyphLoader_New( FT_Memory memory,
FT_GlyphLoader *aloader )
{
FT_GlyphLoader loader = NULL;
FT_Error error;
if ( !FT_NEW( loader ) )
{
loader->memory = memory;
*aloader = loader;
}
return error;
}
/* rewind the glyph loader - reset counters to 0 */
FT_BASE_DEF( void )
FT_GlyphLoader_Rewind( FT_GlyphLoader loader )
{
FT_GlyphLoad base = &loader->base;
FT_GlyphLoad current = &loader->current;
base->outline.n_points = 0;
base->outline.n_contours = 0;
base->num_subglyphs = 0;
*current = *base;
}
/* reset the glyph loader, frees all allocated tables */
/* and starts from zero */
FT_BASE_DEF( void )
FT_GlyphLoader_Reset( FT_GlyphLoader loader )
{
FT_Memory memory = loader->memory;
FT_FREE( loader->base.outline.points );
FT_FREE( loader->base.outline.tags );
FT_FREE( loader->base.outline.contours );
FT_FREE( loader->base.extra_points );
FT_FREE( loader->base.subglyphs );
loader->base.extra_points2 = NULL;
loader->max_points = 0;
loader->max_contours = 0;
loader->max_subglyphs = 0;
FT_GlyphLoader_Rewind( loader );
}
/* delete a glyph loader */
FT_BASE_DEF( void )
FT_GlyphLoader_Done( FT_GlyphLoader loader )
{
if ( loader )
{
FT_Memory memory = loader->memory;
FT_GlyphLoader_Reset( loader );
FT_FREE( loader );
}
}
/* re-adjust the `current' outline fields */
static void
FT_GlyphLoader_Adjust_Points( FT_GlyphLoader loader )
{
FT_Outline* base = &loader->base.outline;
FT_Outline* current = &loader->current.outline;
current->points = base->points + base->n_points;
current->tags = base->tags + base->n_points;
current->contours = base->contours + base->n_contours;
/* handle extra points table - if any */
if ( loader->use_extra )
{
loader->current.extra_points = loader->base.extra_points +
base->n_points;
loader->current.extra_points2 = loader->base.extra_points2 +
base->n_points;
}
}
FT_BASE_DEF( FT_Error )
FT_GlyphLoader_CreateExtra( FT_GlyphLoader loader )
{
FT_Error error;
FT_Memory memory = loader->memory;
if ( !FT_NEW_ARRAY( loader->base.extra_points, 2 * loader->max_points ) )
{
loader->use_extra = 1;
loader->base.extra_points2 = loader->base.extra_points +
loader->max_points;
FT_GlyphLoader_Adjust_Points( loader );
}
return error;
}
/* re-adjust the `current' subglyphs field */
static void
FT_GlyphLoader_Adjust_Subglyphs( FT_GlyphLoader loader )
{
FT_GlyphLoad base = &loader->base;
FT_GlyphLoad current = &loader->current;
current->subglyphs = base->subglyphs + base->num_subglyphs;
}
/* Ensure that we can add `n_points' and `n_contours' to our glyph. */
/* This function reallocates its outline tables if necessary. Note that */
/* it DOESN'T change the number of points within the loader! */
/* */
FT_BASE_DEF( FT_Error )
FT_GlyphLoader_CheckPoints( FT_GlyphLoader loader,
FT_UInt n_points,
FT_UInt n_contours )
{
FT_Memory memory = loader->memory;
FT_Error error = FT_Err_Ok;
FT_Outline* base = &loader->base.outline;
FT_Outline* current = &loader->current.outline;
FT_Bool adjust = 0;
FT_UInt new_max, old_max;
/* check points & tags */
new_max = base->n_points + current->n_points + n_points;
old_max = loader->max_points;
if ( new_max > old_max )
{
new_max = FT_PAD_CEIL( new_max, 8 );
if ( new_max > FT_OUTLINE_POINTS_MAX )
return FT_Err_Array_Too_Large;
if ( FT_RENEW_ARRAY( base->points, old_max, new_max ) ||
FT_RENEW_ARRAY( base->tags, old_max, new_max ) )
goto Exit;
if ( loader->use_extra )
{
if ( FT_RENEW_ARRAY( loader->base.extra_points,
old_max * 2, new_max * 2 ) )
goto Exit;
FT_ARRAY_MOVE( loader->base.extra_points + new_max,
loader->base.extra_points + old_max,
old_max );
loader->base.extra_points2 = loader->base.extra_points + new_max;
}
adjust = 1;
loader->max_points = new_max;
}
/* check contours */
old_max = loader->max_contours;
new_max = base->n_contours + current->n_contours +
n_contours;
if ( new_max > old_max )
{
new_max = FT_PAD_CEIL( new_max, 4 );
if ( new_max > FT_OUTLINE_CONTOURS_MAX )
return FT_Err_Array_Too_Large;
if ( FT_RENEW_ARRAY( base->contours, old_max, new_max ) )
goto Exit;
adjust = 1;
loader->max_contours = new_max;
}
if ( adjust )
FT_GlyphLoader_Adjust_Points( loader );
Exit:
return error;
}
/* Ensure that we can add `n_subglyphs' to our glyph. this function */
/* reallocates its subglyphs table if necessary. Note that it DOES */
/* NOT change the number of subglyphs within the loader! */
/* */
FT_BASE_DEF( FT_Error )
FT_GlyphLoader_CheckSubGlyphs( FT_GlyphLoader loader,
FT_UInt n_subs )
{
FT_Memory memory = loader->memory;
FT_Error error = FT_Err_Ok;
FT_UInt new_max, old_max;
FT_GlyphLoad base = &loader->base;
FT_GlyphLoad current = &loader->current;
new_max = base->num_subglyphs + current->num_subglyphs + n_subs;
old_max = loader->max_subglyphs;
if ( new_max > old_max )
{
new_max = FT_PAD_CEIL( new_max, 2 );
if ( FT_RENEW_ARRAY( base->subglyphs, old_max, new_max ) )
goto Exit;
loader->max_subglyphs = new_max;
FT_GlyphLoader_Adjust_Subglyphs( loader );
}
Exit:
return error;
}
/* prepare loader for the addition of a new glyph on top of the base one */
FT_BASE_DEF( void )
FT_GlyphLoader_Prepare( FT_GlyphLoader loader )
{
FT_GlyphLoad current = &loader->current;
current->outline.n_points = 0;
current->outline.n_contours = 0;
current->num_subglyphs = 0;
FT_GlyphLoader_Adjust_Points ( loader );
FT_GlyphLoader_Adjust_Subglyphs( loader );
}
/* add current glyph to the base image -- and prepare for another */
FT_BASE_DEF( void )
FT_GlyphLoader_Add( FT_GlyphLoader loader )
{
FT_GlyphLoad base;
FT_GlyphLoad current;
FT_UInt n_curr_contours;
FT_UInt n_base_points;
FT_UInt n;
if ( !loader )
return;
base = &loader->base;
current = &loader->current;
n_curr_contours = current->outline.n_contours;
n_base_points = base->outline.n_points;
base->outline.n_points =
(short)( base->outline.n_points + current->outline.n_points );
base->outline.n_contours =
(short)( base->outline.n_contours + current->outline.n_contours );
base->num_subglyphs += current->num_subglyphs;
/* adjust contours count in newest outline */
for ( n = 0; n < n_curr_contours; n++ )
current->outline.contours[n] =
(short)( current->outline.contours[n] + n_base_points );
/* prepare for another new glyph image */
FT_GlyphLoader_Prepare( loader );
}
FT_BASE_DEF( FT_Error )
FT_GlyphLoader_CopyPoints( FT_GlyphLoader target,
FT_GlyphLoader source )
{
FT_Error error;
FT_UInt num_points = source->base.outline.n_points;
FT_UInt num_contours = source->base.outline.n_contours;
error = FT_GlyphLoader_CheckPoints( target, num_points, num_contours );
if ( !error )
{
FT_Outline* out = &target->base.outline;
FT_Outline* in = &source->base.outline;
FT_ARRAY_COPY( out->points, in->points,
num_points );
FT_ARRAY_COPY( out->tags, in->tags,
num_points );
FT_ARRAY_COPY( out->contours, in->contours,
num_contours );
/* do we need to copy the extra points? */
if ( target->use_extra && source->use_extra )
{
FT_ARRAY_COPY( target->base.extra_points, source->base.extra_points,
num_points );
FT_ARRAY_COPY( target->base.extra_points2, source->base.extra_points2,
num_points );
}
out->n_points = (short)num_points;
out->n_contours = (short)num_contours;
FT_GlyphLoader_Adjust_Points( target );
}
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftobjs.c */
/* */
/* The FreeType private base classes (body). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftlist.h */
/* */
/* Generic list support for FreeType (specification). */
/* */
/* Copyright 1996-2001, 2003, 2007, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file implements functions relative to list processing. Its */
/* data structures are defined in `freetype.h'. */
/* */
/*************************************************************************/
#define __FTLIST_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* list_processing */
/* */
/* <Title> */
/* List Processing */
/* */
/* <Abstract> */
/* Simple management of lists. */
/* */
/* <Description> */
/* This section contains various definitions related to list */
/* processing using doubly-linked nodes. */
/* */
/* <Order> */
/* FT_List */
/* FT_ListNode */
/* FT_ListRec */
/* FT_ListNodeRec */
/* */
/* FT_List_Add */
/* FT_List_Insert */
/* FT_List_Find */
/* FT_List_Remove */
/* FT_List_Up */
/* FT_List_Iterate */
/* FT_List_Iterator */
/* FT_List_Finalize */
/* FT_List_Destructor */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_List_Find */
/* */
/* <Description> */
/* Find the list node for a given listed object. */
/* */
/* <Input> */
/* list :: A pointer to the parent list. */
/* data :: The address of the listed object. */
/* */
/* <Return> */
/* List node. NULL if it wasn't found. */
/* */
FT_EXPORT( FT_ListNode )
FT_List_Find( FT_List list,
void* data );
/*************************************************************************/
/* */
/* <Function> */
/* FT_List_Add */
/* */
/* <Description> */
/* Append an element to the end of a list. */
/* */
/* <InOut> */
/* list :: A pointer to the parent list. */
/* node :: The node to append. */
/* */
FT_EXPORT( void )
FT_List_Add( FT_List list,
FT_ListNode node );
/*************************************************************************/
/* */
/* <Function> */
/* FT_List_Insert */
/* */
/* <Description> */
/* Insert an element at the head of a list. */
/* */
/* <InOut> */
/* list :: A pointer to parent list. */
/* node :: The node to insert. */
/* */
FT_EXPORT( void )
FT_List_Insert( FT_List list,
FT_ListNode node );
/*************************************************************************/
/* */
/* <Function> */
/* FT_List_Remove */
/* */
/* <Description> */
/* Remove a node from a list. This function doesn't check whether */
/* the node is in the list! */
/* */
/* <Input> */
/* node :: The node to remove. */
/* */
/* <InOut> */
/* list :: A pointer to the parent list. */
/* */
FT_EXPORT( void )
FT_List_Remove( FT_List list,
FT_ListNode node );
/*************************************************************************/
/* */
/* <Function> */
/* FT_List_Up */
/* */
/* <Description> */
/* Move a node to the head/top of a list. Used to maintain LRU */
/* lists. */
/* */
/* <InOut> */
/* list :: A pointer to the parent list. */
/* node :: The node to move. */
/* */
FT_EXPORT( void )
FT_List_Up( FT_List list,
FT_ListNode node );
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_List_Iterator */
/* */
/* <Description> */
/* An FT_List iterator function which is called during a list parse */
/* by @FT_List_Iterate. */
/* */
/* <Input> */
/* node :: The current iteration list node. */
/* */
/* user :: A typeless pointer passed to @FT_List_Iterate. */
/* Can be used to point to the iteration's state. */
/* */
typedef FT_Error
(*FT_List_Iterator)( FT_ListNode node,
void* user );
/*************************************************************************/
/* */
/* <Function> */
/* FT_List_Iterate */
/* */
/* <Description> */
/* Parse a list and calls a given iterator function on each element. */
/* Note that parsing is stopped as soon as one of the iterator calls */
/* returns a non-zero value. */
/* */
/* <Input> */
/* list :: A handle to the list. */
/* iterator :: An iterator function, called on each node of the list. */
/* user :: A user-supplied field which is passed as the second */
/* argument to the iterator. */
/* */
/* <Return> */
/* The result (a FreeType error code) of the last iterator call. */
/* */
FT_EXPORT( FT_Error )
FT_List_Iterate( FT_List list,
FT_List_Iterator iterator,
void* user );
/*************************************************************************/
/* */
/* <FuncType> */
/* FT_List_Destructor */
/* */
/* <Description> */
/* An @FT_List iterator function which is called during a list */
/* finalization by @FT_List_Finalize to destroy all elements in a */
/* given list. */
/* */
/* <Input> */
/* system :: The current system object. */
/* */
/* data :: The current object to destroy. */
/* */
/* user :: A typeless pointer passed to @FT_List_Iterate. It can */
/* be used to point to the iteration's state. */
/* */
typedef void
(*FT_List_Destructor)( FT_Memory memory,
void* data,
void* user );
/*************************************************************************/
/* */
/* <Function> */
/* FT_List_Finalize */
/* */
/* <Description> */
/* Destroy all elements in the list as well as the list itself. */
/* */
/* <Input> */
/* list :: A handle to the list. */
/* */
/* destroy :: A list destructor that will be applied to each element */
/* of the list. */
/* */
/* memory :: The current memory object which handles deallocation. */
/* */
/* user :: A user-supplied field which is passed as the last */
/* argument to the destructor. */
/* */
/* <Note> */
/* This function expects that all nodes added by @FT_List_Add or */
/* @FT_List_Insert have been dynamically allocated. */
/* */
FT_EXPORT( void )
FT_List_Finalize( FT_List list,
FT_List_Destructor destroy,
FT_Memory memory,
void* user );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftoutln.h */
/* */
/* Support for the FT_Outline type used to store glyph shapes of */
/* most scalable font formats (specification). */
/* */
/* Copyright 1996-2003, 2005-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTOUTLN_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* outline_processing */
/* */
/* <Title> */
/* Outline Processing */
/* */
/* <Abstract> */
/* Functions to create, transform, and render vectorial glyph images. */
/* */
/* <Description> */
/* This section contains routines used to create and destroy scalable */
/* glyph images known as `outlines'. These can also be measured, */
/* transformed, and converted into bitmaps and pixmaps. */
/* */
/* <Order> */
/* FT_Outline */
/* FT_OUTLINE_FLAGS */
/* FT_Outline_New */
/* FT_Outline_Done */
/* FT_Outline_Copy */
/* FT_Outline_Translate */
/* FT_Outline_Transform */
/* FT_Outline_Embolden */
/* FT_Outline_EmboldenXY */
/* FT_Outline_Reverse */
/* FT_Outline_Check */
/* */
/* FT_Outline_Get_CBox */
/* FT_Outline_Get_BBox */
/* */
/* FT_Outline_Get_Bitmap */
/* FT_Outline_Render */
/* */
/* FT_Outline_Decompose */
/* FT_Outline_Funcs */
/* FT_Outline_MoveTo_Func */
/* FT_Outline_LineTo_Func */
/* FT_Outline_ConicTo_Func */
/* FT_Outline_CubicTo_Func */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Decompose */
/* */
/* <Description> */
/* Walk over an outline's structure to decompose it into individual */
/* segments and Bézier arcs. This function also emits `move to' */
/* operations to indicate the start of new contours in the outline. */
/* */
/* <Input> */
/* outline :: A pointer to the source target. */
/* */
/* func_interface :: A table of `emitters', i.e., function pointers */
/* called during decomposition to indicate path */
/* operations. */
/* */
/* <InOut> */
/* user :: A typeless pointer which is passed to each */
/* emitter during the decomposition. It can be */
/* used to store the state during the */
/* decomposition. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Outline_Decompose( FT_Outline* outline,
const FT_Outline_Funcs* func_interface,
void* user );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_New */
/* */
/* <Description> */
/* Create a new outline of a given size. */
/* */
/* <Input> */
/* library :: A handle to the library object from where the */
/* outline is allocated. Note however that the new */
/* outline will *not* necessarily be *freed*, when */
/* destroying the library, by @FT_Done_FreeType. */
/* */
/* numPoints :: The maximum number of points within the outline. */
/* */
/* numContours :: The maximum number of contours within the outline. */
/* */
/* <Output> */
/* anoutline :: A handle to the new outline. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* The reason why this function takes a `library' parameter is simply */
/* to use the library's memory allocator. */
/* */
FT_EXPORT( FT_Error )
FT_Outline_New( FT_Library library,
FT_UInt numPoints,
FT_Int numContours,
FT_Outline *anoutline );
FT_EXPORT( FT_Error )
FT_Outline_New_Internal( FT_Memory memory,
FT_UInt numPoints,
FT_Int numContours,
FT_Outline *anoutline );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Done */
/* */
/* <Description> */
/* Destroy an outline created with @FT_Outline_New. */
/* */
/* <Input> */
/* library :: A handle of the library object used to allocate the */
/* outline. */
/* */
/* outline :: A pointer to the outline object to be discarded. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* If the outline's `owner' field is not set, only the outline */
/* descriptor will be released. */
/* */
/* The reason why this function takes an `library' parameter is */
/* simply to use ft_mem_free(). */
/* */
FT_EXPORT( FT_Error )
FT_Outline_Done( FT_Library library,
FT_Outline* outline );
FT_EXPORT( FT_Error )
FT_Outline_Done_Internal( FT_Memory memory,
FT_Outline* outline );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Check */
/* */
/* <Description> */
/* Check the contents of an outline descriptor. */
/* */
/* <Input> */
/* outline :: A handle to a source outline. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Outline_Check( FT_Outline* outline );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Get_CBox */
/* */
/* <Description> */
/* Return an outline's `control box'. The control box encloses all */
/* the outline's points, including Bézier control points. Though it */
/* coincides with the exact bounding box for most glyphs, it can be */
/* slightly larger in some situations (like when rotating an outline */
/* which contains Bézier outside arcs). */
/* */
/* Computing the control box is very fast, while getting the bounding */
/* box can take much more time as it needs to walk over all segments */
/* and arcs in the outline. To get the latter, you can use the */
/* `ftbbox' component which is dedicated to this single task. */
/* */
/* <Input> */
/* outline :: A pointer to the source outline descriptor. */
/* */
/* <Output> */
/* acbox :: The outline's control box. */
/* */
/* <Note> */
/* See @FT_Glyph_Get_CBox for a discussion of tricky fonts. */
/* */
FT_EXPORT( void )
FT_Outline_Get_CBox( const FT_Outline* outline,
FT_BBox *acbox );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Translate */
/* */
/* <Description> */
/* Apply a simple translation to the points of an outline. */
/* */
/* <InOut> */
/* outline :: A pointer to the target outline descriptor. */
/* */
/* <Input> */
/* xOffset :: The horizontal offset. */
/* */
/* yOffset :: The vertical offset. */
/* */
FT_EXPORT( void )
FT_Outline_Translate( const FT_Outline* outline,
FT_Pos xOffset,
FT_Pos yOffset );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Copy */
/* */
/* <Description> */
/* Copy an outline into another one. Both objects must have the */
/* same sizes (number of points & number of contours) when this */
/* function is called. */
/* */
/* <Input> */
/* source :: A handle to the source outline. */
/* */
/* <Output> */
/* target :: A handle to the target outline. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Outline_Copy( const FT_Outline* source,
FT_Outline *target );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Transform */
/* */
/* <Description> */
/* Apply a simple 2x2 matrix to all of an outline's points. Useful */
/* for applying rotations, slanting, flipping, etc. */
/* */
/* <InOut> */
/* outline :: A pointer to the target outline descriptor. */
/* */
/* <Input> */
/* matrix :: A pointer to the transformation matrix. */
/* */
/* <Note> */
/* You can use @FT_Outline_Translate if you need to translate the */
/* outline's points. */
/* */
FT_EXPORT( void )
FT_Outline_Transform( const FT_Outline* outline,
const FT_Matrix* matrix );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Embolden */
/* */
/* <Description> */
/* Embolden an outline. The new outline will be at most 4~times */
/* `strength' pixels wider and higher. You may think of the left and */
/* bottom borders as unchanged. */
/* */
/* Negative `strength' values to reduce the outline thickness are */
/* possible also. */
/* */
/* <InOut> */
/* outline :: A handle to the target outline. */
/* */
/* <Input> */
/* strength :: How strong the glyph is emboldened. Expressed in */
/* 26.6 pixel format. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* The used algorithm to increase or decrease the thickness of the */
/* glyph doesn't change the number of points; this means that certain */
/* situations like acute angles or intersections are sometimes */
/* handled incorrectly. */
/* */
/* If you need `better' metrics values you should call */
/* @FT_Outline_Get_CBox or @FT_Outline_Get_BBox. */
/* */
/* Example call: */
/* */
/* { */
/* FT_Load_Glyph( face, index, FT_LOAD_DEFAULT ); */
/* if ( face->slot->format == FT_GLYPH_FORMAT_OUTLINE ) */
/* FT_Outline_Embolden( &face->slot->outline, strength ); */
/* } */
/* */
FT_EXPORT( FT_Error )
FT_Outline_Embolden( FT_Outline* outline,
FT_Pos strength );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_EmboldenXY */
/* */
/* <Description> */
/* Embolden an outline. The new outline will be `xstrength' pixels */
/* wider and `ystrength' pixels higher. Otherwise, it is similar to */
/* @FT_Outline_Embolden, which uses the same strength in both */
/* directions. */
/* */
FT_EXPORT( FT_Error )
FT_Outline_EmboldenXY( FT_Outline* outline,
FT_Pos xstrength,
FT_Pos ystrength );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Reverse */
/* */
/* <Description> */
/* Reverse the drawing direction of an outline. This is used to */
/* ensure consistent fill conventions for mirrored glyphs. */
/* */
/* <InOut> */
/* outline :: A pointer to the target outline descriptor. */
/* */
/* <Note> */
/* This function toggles the bit flag @FT_OUTLINE_REVERSE_FILL in */
/* the outline's `flags' field. */
/* */
/* It shouldn't be used by a normal client application, unless it */
/* knows what it is doing. */
/* */
FT_EXPORT( void )
FT_Outline_Reverse( FT_Outline* outline );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Get_Bitmap */
/* */
/* <Description> */
/* Render an outline within a bitmap. The outline's image is simply */
/* OR-ed to the target bitmap. */
/* */
/* <Input> */
/* library :: A handle to a FreeType library object. */
/* */
/* outline :: A pointer to the source outline descriptor. */
/* */
/* <InOut> */
/* abitmap :: A pointer to the target bitmap descriptor. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* This function does NOT CREATE the bitmap, it only renders an */
/* outline image within the one you pass to it! Consequently, the */
/* various fields in `abitmap' should be set accordingly. */
/* */
/* It will use the raster corresponding to the default glyph format. */
/* */
/* The value of the `num_grays' field in `abitmap' is ignored. If */
/* you select the gray-level rasterizer, and you want less than 256 */
/* gray levels, you have to use @FT_Outline_Render directly. */
/* */
FT_EXPORT( FT_Error )
FT_Outline_Get_Bitmap( FT_Library library,
FT_Outline* outline,
const FT_Bitmap *abitmap );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Render */
/* */
/* <Description> */
/* Render an outline within a bitmap using the current scan-convert. */
/* This function uses an @FT_Raster_Params structure as an argument, */
/* allowing advanced features like direct composition, translucency, */
/* etc. */
/* */
/* <Input> */
/* library :: A handle to a FreeType library object. */
/* */
/* outline :: A pointer to the source outline descriptor. */
/* */
/* <InOut> */
/* params :: A pointer to an @FT_Raster_Params structure used to */
/* describe the rendering operation. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* You should know what you are doing and how @FT_Raster_Params works */
/* to use this function. */
/* */
/* The field `params.source' will be set to `outline' before the scan */
/* converter is called, which means that the value you give to it is */
/* actually ignored. */
/* */
/* The gray-level rasterizer always uses 256 gray levels. If you */
/* want less gray levels, you have to provide your own span callback. */
/* See the @FT_RASTER_FLAG_DIRECT value of the `flags' field in the */
/* @FT_Raster_Params structure for more details. */
/* */
FT_EXPORT( FT_Error )
FT_Outline_Render( FT_Library library,
FT_Outline* outline,
FT_Raster_Params* params );
/**************************************************************************
*
* @enum:
* FT_Orientation
*
* @description:
* A list of values used to describe an outline's contour orientation.
*
* The TrueType and PostScript specifications use different conventions
* to determine whether outline contours should be filled or unfilled.
*
* @values:
* FT_ORIENTATION_TRUETYPE ::
* According to the TrueType specification, clockwise contours must
* be filled, and counter-clockwise ones must be unfilled.
*
* FT_ORIENTATION_POSTSCRIPT ::
* According to the PostScript specification, counter-clockwise contours
* must be filled, and clockwise ones must be unfilled.
*
* FT_ORIENTATION_FILL_RIGHT ::
* This is identical to @FT_ORIENTATION_TRUETYPE, but is used to
* remember that in TrueType, everything that is to the right of
* the drawing direction of a contour must be filled.
*
* FT_ORIENTATION_FILL_LEFT ::
* This is identical to @FT_ORIENTATION_POSTSCRIPT, but is used to
* remember that in PostScript, everything that is to the left of
* the drawing direction of a contour must be filled.
*
* FT_ORIENTATION_NONE ::
* The orientation cannot be determined. That is, different parts of
* the glyph have different orientation.
*
*/
typedef enum FT_Orientation_
{
FT_ORIENTATION_TRUETYPE = 0,
FT_ORIENTATION_POSTSCRIPT = 1,
FT_ORIENTATION_FILL_RIGHT = FT_ORIENTATION_TRUETYPE,
FT_ORIENTATION_FILL_LEFT = FT_ORIENTATION_POSTSCRIPT,
FT_ORIENTATION_NONE
} FT_Orientation;
/**************************************************************************
*
* @function:
* FT_Outline_Get_Orientation
*
* @description:
* This function analyzes a glyph outline and tries to compute its
* fill orientation (see @FT_Orientation). This is done by computing
* the direction of each global horizontal and/or vertical extrema
* within the outline.
*
* Note that this will return @FT_ORIENTATION_TRUETYPE for empty
* outlines.
*
* @input:
* outline ::
* A handle to the source outline.
*
* @return:
* The orientation.
*
*/
FT_EXPORT( FT_Orientation )
FT_Outline_Get_Orientation( FT_Outline* outline );
/* */
FT_END_HEADER
/* END */
/* Local Variables: */
/* coding: utf-8 */
/* End: */
/***************************************************************************/
/* */
/* ftvalid.h */
/* */
/* FreeType validation support (specification). */
/* */
/* Copyright 2004 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTVALID_H__
/* for ft_setjmp and ft_longjmp */
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** V A L I D A T I O N ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* handle to a validation object */
typedef struct FT_ValidatorRec_ volatile* FT_Validator;
/*************************************************************************/
/* */
/* There are three distinct validation levels defined here: */
/* */
/* FT_VALIDATE_DEFAULT :: */
/* A table that passes this validation level can be used reliably by */
/* FreeType. It generally means that all offsets have been checked to */
/* prevent out-of-bound reads, that array counts are correct, etc. */
/* */
/* FT_VALIDATE_TIGHT :: */
/* A table that passes this validation level can be used reliably and */
/* doesn't contain invalid data. For example, a charmap table that */
/* returns invalid glyph indices will not pass, even though it can */
/* be used with FreeType in default mode (the library will simply */
/* return an error later when trying to load the glyph). */
/* */
/* It also checks that fields which must be a multiple of 2, 4, or 8, */
/* don't have incorrect values, etc. */
/* */
/* FT_VALIDATE_PARANOID :: */
/* Only for font debugging. Checks that a table follows the */
/* specification by 100%. Very few fonts will be able to pass this */
/* level anyway but it can be useful for certain tools like font */
/* editors/converters. */
/* */
typedef enum FT_ValidationLevel_
{
FT_VALIDATE_DEFAULT = 0,
FT_VALIDATE_TIGHT,
FT_VALIDATE_PARANOID
} FT_ValidationLevel;
/* validator structure */
typedef struct FT_ValidatorRec_
{
/* address of table in memory */
const FT_Byte* base;
/* `base' + sizeof(table) in memory */
const FT_Byte* limit;
/* validation level */
FT_ValidationLevel level;
/* error returned. 0 means success */
FT_Error error;
/* used for exception handling */
ft_jmp_buf jump_buffer;
} FT_ValidatorRec;
#define FT_VALIDATOR( x ) ((FT_Validator)( x ))
FT_BASE( void )
ft_validator_init( FT_Validator valid,
const FT_Byte* base,
const FT_Byte* limit,
FT_ValidationLevel level );
/* Do not use this. It's broken and will cause your validator to crash */
/* if you run it on an invalid font. */
FT_BASE( FT_Int )
ft_validator_run( FT_Validator valid );
/* Sets the error field in a validator, then calls `longjmp' to return */
/* to high-level caller. Using `setjmp/longjmp' avoids many stupid */
/* error checks within the validation routines. */
/* */
FT_BASE( void )
ft_validator_error( FT_Validator valid,
FT_Error error );
/* Calls ft_validate_error. Assumes that the `valid' local variable */
/* holds a pointer to the current validator object. */
/* */
/* Use preprocessor prescan to pass FT_ERR_PREFIX. */
/* */
#define FT_INVALID( _prefix, _error ) FT_INVALID_( _prefix, _error )
#define FT_INVALID_( _prefix, _error ) \
ft_validator_error( valid, _prefix ## _error )
/* called when a broken table is detected */
#define FT_INVALID_TOO_SHORT \
FT_INVALID( FT_ERR_PREFIX, Invalid_Table )
/* called when an invalid offset is detected */
#define FT_INVALID_OFFSET \
FT_INVALID( FT_ERR_PREFIX, Invalid_Offset )
/* called when an invalid format/value is detected */
#define FT_INVALID_FORMAT \
FT_INVALID( FT_ERR_PREFIX, Invalid_Table )
/* called when an invalid glyph index is detected */
#define FT_INVALID_GLYPH_ID \
FT_INVALID( FT_ERR_PREFIX, Invalid_Glyph_Index )
/* called when an invalid field value is detected */
#define FT_INVALID_DATA \
FT_INVALID( FT_ERR_PREFIX, Invalid_Table )
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftrfork.h */
/* */
/* Embedded resource forks accessor (specification). */
/* */
/* Copyright 2004, 2006, 2007, 2012 by */
/* Masatake YAMATO and Redhat K.K. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* Development of the code in this file is support of */
/* Information-technology Promotion Agency, Japan. */
/***************************************************************************/
#define __FTRFORK_H__
FT_BEGIN_HEADER
/* Number of guessing rules supported in `FT_Raccess_Guess'. */
/* Don't forget to increment the number if you add a new guessing rule. */
#define FT_RACCESS_N_RULES 9
/* A structure to describe a reference in a resource by its resource ID */
/* and internal offset. The `POST' resource expects to be concatenated */
/* by the order of resource IDs instead of its appearance in the file. */
typedef struct FT_RFork_Ref_
{
FT_UShort res_id;
FT_ULong offset;
} FT_RFork_Ref;
typedef FT_Error
(*ft_raccess_guess_func)( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
typedef enum FT_RFork_Rule_ {
FT_RFork_Rule_invalid = -2,
/* -1 */
FT_RFork_Rule_uknown,
FT_RFork_Rule_apple_double,
FT_RFork_Rule_apple_single,
FT_RFork_Rule_darwin_ufs_export,
FT_RFork_Rule_darwin_newvfs,
FT_RFork_Rule_darwin_hfsplus,
FT_RFork_Rule_vfat,
FT_RFork_Rule_linux_cap,
FT_RFork_Rule_linux_double,
FT_RFork_Rule_linux_netatalk
} FT_RFork_Rule;
/* For fast translation between rule index and rule type,
* the macros FT_RFORK_xxx should be kept consistent with
* the raccess_guess_funcs table
*/
typedef struct ft_raccess_guess_rec_ {
ft_raccess_guess_func func;
FT_RFork_Rule type;
} ft_raccess_guess_rec;
/* this array is a storage in non-PIC mode, so ; is needed in END */
#define CONST_FT_RFORK_RULE_ARRAY_BEGIN( name, type ) \
const type name[] = {
#define CONST_FT_RFORK_RULE_ARRAY_ENTRY( func_suffix, type_suffix ) \
{ raccess_guess_ ## func_suffix, \
FT_RFork_Rule_ ## type_suffix },
#define CONST_FT_RFORK_RULE_ARRAY_END };
/*************************************************************************/
/* */
/* <Function> */
/* FT_Raccess_Guess */
/* */
/* <Description> */
/* Guess a file name and offset where the actual resource fork is */
/* stored. The macro FT_RACCESS_N_RULES holds the number of */
/* guessing rules; the guessed result for the Nth rule is */
/* represented as a triplet: a new file name (new_names[N]), a file */
/* offset (offsets[N]), and an error code (errors[N]). */
/* */
/* <Input> */
/* library :: */
/* A FreeType library instance. */
/* */
/* stream :: */
/* A file stream containing the resource fork. */
/* */
/* base_name :: */
/* The (base) file name of the resource fork used for some */
/* guessing rules. */
/* */
/* <Output> */
/* new_names :: */
/* An array of guessed file names in which the resource forks may */
/* exist. If `new_names[N]' is NULL, the guessed file name is */
/* equal to `base_name'. */
/* */
/* offsets :: */
/* An array of guessed file offsets. `offsets[N]' holds the file */
/* offset of the possible start of the resource fork in file */
/* `new_names[N]'. */
/* */
/* errors :: */
/* An array of FreeType error codes. `errors[N]' is the error */
/* code of Nth guessing rule function. If `errors[N]' is not */
/* FT_Err_Ok, `new_names[N]' and `offsets[N]' are meaningless. */
/* */
FT_BASE( void )
FT_Raccess_Guess( FT_Library library,
FT_Stream stream,
char* base_name,
char** new_names,
FT_Long* offsets,
FT_Error* errors );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Raccess_Get_HeaderInfo */
/* */
/* <Description> */
/* Get the information from the header of resource fork. The */
/* information includes the file offset where the resource map */
/* starts, and the file offset where the resource data starts. */
/* `FT_Raccess_Get_DataOffsets' requires these two data. */
/* */
/* <Input> */
/* library :: */
/* A FreeType library instance. */
/* */
/* stream :: */
/* A file stream containing the resource fork. */
/* */
/* rfork_offset :: */
/* The file offset where the resource fork starts. */
/* */
/* <Output> */
/* map_offset :: */
/* The file offset where the resource map starts. */
/* */
/* rdata_pos :: */
/* The file offset where the resource data starts. */
/* */
/* <Return> */
/* FreeType error code. FT_Err_Ok means success. */
/* */
FT_BASE( FT_Error )
FT_Raccess_Get_HeaderInfo( FT_Library library,
FT_Stream stream,
FT_Long rfork_offset,
FT_Long *map_offset,
FT_Long *rdata_pos );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Raccess_Get_DataOffsets */
/* */
/* <Description> */
/* Get the data offsets for a tag in a resource fork. Offsets are */
/* stored in an array because, in some cases, resources in a resource */
/* fork have the same tag. */
/* */
/* <Input> */
/* library :: */
/* A FreeType library instance. */
/* */
/* stream :: */
/* A file stream containing the resource fork. */
/* */
/* map_offset :: */
/* The file offset where the resource map starts. */
/* */
/* rdata_pos :: */
/* The file offset where the resource data starts. */
/* */
/* tag :: */
/* The resource tag. */
/* */
/* <Output> */
/* offsets :: */
/* The stream offsets for the resource data specified by `tag'. */
/* This array is allocated by the function, so you have to call */
/* @ft_mem_free after use. */
/* */
/* count :: */
/* The length of offsets array. */
/* */
/* <Return> */
/* FreeType error code. FT_Err_Ok means success. */
/* */
/* <Note> */
/* Normally you should use `FT_Raccess_Get_HeaderInfo' to get the */
/* value for `map_offset' and `rdata_pos'. */
/* */
FT_BASE( FT_Error )
FT_Raccess_Get_DataOffsets( FT_Library library,
FT_Stream stream,
FT_Long map_offset,
FT_Long rdata_pos,
FT_Long tag,
FT_Long **offsets,
FT_Long *count );
FT_END_HEADER
/* END */
/* for SFNT_Load_Table_Func */
/***************************************************************************/
/* */
/* sfnt.h */
/* */
/* High-level `sfnt' driver interface (specification). */
/* */
/* Copyright 1996-2006, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SFNT_H__
/***************************************************************************/
/* */
/* tttypes.h */
/* */
/* Basic SFNT/TrueType type definitions and interface (specification */
/* only). */
/* */
/* Copyright 1996-2002, 2004-2008, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTTYPES_H__
/***************************************************************************/
/* */
/* tttables.h */
/* */
/* Basic SFNT/TrueType tables definitions and interface */
/* (specification only). */
/* */
/* Copyright 1996-2005, 2008-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTTABLES_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* truetype_tables */
/* */
/* <Title> */
/* TrueType Tables */
/* */
/* <Abstract> */
/* TrueType specific table types and functions. */
/* */
/* <Description> */
/* This section contains the definition of TrueType-specific tables */
/* as well as some routines used to access and process them. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* TT_Header */
/* */
/* <Description> */
/* A structure used to model a TrueType font header table. All */
/* fields follow the TrueType specification. */
/* */
typedef struct TT_Header_
{
FT_Fixed Table_Version;
FT_Fixed Font_Revision;
FT_Long CheckSum_Adjust;
FT_Long Magic_Number;
FT_UShort Flags;
FT_UShort Units_Per_EM;
FT_Long Created [2];
FT_Long Modified[2];
FT_Short xMin;
FT_Short yMin;
FT_Short xMax;
FT_Short yMax;
FT_UShort Mac_Style;
FT_UShort Lowest_Rec_PPEM;
FT_Short Font_Direction;
FT_Short Index_To_Loc_Format;
FT_Short Glyph_Data_Format;
} TT_Header;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_HoriHeader */
/* */
/* <Description> */
/* A structure used to model a TrueType horizontal header, the `hhea' */
/* table, as well as the corresponding horizontal metrics table, */
/* i.e., the `hmtx' table. */
/* */
/* <Fields> */
/* Version :: The table version. */
/* */
/* Ascender :: The font's ascender, i.e., the distance */
/* from the baseline to the top-most of all */
/* glyph points found in the font. */
/* */
/* This value is invalid in many fonts, as */
/* it is usually set by the font designer, */
/* and often reflects only a portion of the */
/* glyphs found in the font (maybe ASCII). */
/* */
/* You should use the `sTypoAscender' field */
/* of the OS/2 table instead if you want */
/* the correct one. */
/* */
/* Descender :: The font's descender, i.e., the distance */
/* from the baseline to the bottom-most of */
/* all glyph points found in the font. It */
/* is negative. */
/* */
/* This value is invalid in many fonts, as */
/* it is usually set by the font designer, */
/* and often reflects only a portion of the */
/* glyphs found in the font (maybe ASCII). */
/* */
/* You should use the `sTypoDescender' */
/* field of the OS/2 table instead if you */
/* want the correct one. */
/* */
/* Line_Gap :: The font's line gap, i.e., the distance */
/* to add to the ascender and descender to */
/* get the BTB, i.e., the */
/* baseline-to-baseline distance for the */
/* font. */
/* */
/* advance_Width_Max :: This field is the maximum of all advance */
/* widths found in the font. It can be */
/* used to compute the maximum width of an */
/* arbitrary string of text. */
/* */
/* min_Left_Side_Bearing :: The minimum left side bearing of all */
/* glyphs within the font. */
/* */
/* min_Right_Side_Bearing :: The minimum right side bearing of all */
/* glyphs within the font. */
/* */
/* xMax_Extent :: The maximum horizontal extent (i.e., the */
/* `width' of a glyph's bounding box) for */
/* all glyphs in the font. */
/* */
/* caret_Slope_Rise :: The rise coefficient of the cursor's */
/* slope of the cursor (slope=rise/run). */
/* */
/* caret_Slope_Run :: The run coefficient of the cursor's */
/* slope. */
/* */
/* Reserved :: 8~reserved bytes. */
/* */
/* metric_Data_Format :: Always~0. */
/* */
/* number_Of_HMetrics :: Number of HMetrics entries in the `hmtx' */
/* table -- this value can be smaller than */
/* the total number of glyphs in the font. */
/* */
/* long_metrics :: A pointer into the `hmtx' table. */
/* */
/* short_metrics :: A pointer into the `hmtx' table. */
/* */
/* <Note> */
/* IMPORTANT: The TT_HoriHeader and TT_VertHeader structures should */
/* be identical except for the names of their fields which */
/* are different. */
/* */
/* This ensures that a single function in the `ttload' */
/* module is able to read both the horizontal and vertical */
/* headers. */
/* */
typedef struct TT_HoriHeader_
{
FT_Fixed Version;
FT_Short Ascender;
FT_Short Descender;
FT_Short Line_Gap;
/* advance width maximum */
FT_UShort advance_Width_Max;
/* minimum left-sb */
FT_Short min_Left_Side_Bearing;
/* minimum right-sb */
FT_Short min_Right_Side_Bearing;
/* xmax extents */
FT_Short xMax_Extent;
FT_Short caret_Slope_Rise;
FT_Short caret_Slope_Run;
FT_Short caret_Offset;
FT_Short Reserved[4];
FT_Short metric_Data_Format;
FT_UShort number_Of_HMetrics;
/* The following fields are not defined by the TrueType specification */
/* but they are used to connect the metrics header to the relevant */
/* `HMTX' table. */
void* long_metrics;
void* short_metrics;
} TT_HoriHeader;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_VertHeader */
/* */
/* <Description> */
/* A structure used to model a TrueType vertical header, the `vhea' */
/* table, as well as the corresponding vertical metrics table, i.e., */
/* the `vmtx' table. */
/* */
/* <Fields> */
/* Version :: The table version. */
/* */
/* Ascender :: The font's ascender, i.e., the distance */
/* from the baseline to the top-most of */
/* all glyph points found in the font. */
/* */
/* This value is invalid in many fonts, as */
/* it is usually set by the font designer, */
/* and often reflects only a portion of */
/* the glyphs found in the font (maybe */
/* ASCII). */
/* */
/* You should use the `sTypoAscender' */
/* field of the OS/2 table instead if you */
/* want the correct one. */
/* */
/* Descender :: The font's descender, i.e., the */
/* distance from the baseline to the */
/* bottom-most of all glyph points found */
/* in the font. It is negative. */
/* */
/* This value is invalid in many fonts, as */
/* it is usually set by the font designer, */
/* and often reflects only a portion of */
/* the glyphs found in the font (maybe */
/* ASCII). */
/* */
/* You should use the `sTypoDescender' */
/* field of the OS/2 table instead if you */
/* want the correct one. */
/* */
/* Line_Gap :: The font's line gap, i.e., the distance */
/* to add to the ascender and descender to */
/* get the BTB, i.e., the */
/* baseline-to-baseline distance for the */
/* font. */
/* */
/* advance_Height_Max :: This field is the maximum of all */
/* advance heights found in the font. It */
/* can be used to compute the maximum */
/* height of an arbitrary string of text. */
/* */
/* min_Top_Side_Bearing :: The minimum top side bearing of all */
/* glyphs within the font. */
/* */
/* min_Bottom_Side_Bearing :: The minimum bottom side bearing of all */
/* glyphs within the font. */
/* */
/* yMax_Extent :: The maximum vertical extent (i.e., the */
/* `height' of a glyph's bounding box) for */
/* all glyphs in the font. */
/* */
/* caret_Slope_Rise :: The rise coefficient of the cursor's */
/* slope of the cursor (slope=rise/run). */
/* */
/* caret_Slope_Run :: The run coefficient of the cursor's */
/* slope. */
/* */
/* caret_Offset :: The cursor's offset for slanted fonts. */
/* This value is `reserved' in vmtx */
/* version 1.0. */
/* */
/* Reserved :: 8~reserved bytes. */
/* */
/* metric_Data_Format :: Always~0. */
/* */
/* number_Of_HMetrics :: Number of VMetrics entries in the */
/* `vmtx' table -- this value can be */
/* smaller than the total number of glyphs */
/* in the font. */
/* */
/* long_metrics :: A pointer into the `vmtx' table. */
/* */
/* short_metrics :: A pointer into the `vmtx' table. */
/* */
/* <Note> */
/* IMPORTANT: The TT_HoriHeader and TT_VertHeader structures should */
/* be identical except for the names of their fields which */
/* are different. */
/* */
/* This ensures that a single function in the `ttload' */
/* module is able to read both the horizontal and vertical */
/* headers. */
/* */
typedef struct TT_VertHeader_
{
FT_Fixed Version;
FT_Short Ascender;
FT_Short Descender;
FT_Short Line_Gap;
/* advance height maximum */
FT_UShort advance_Height_Max;
/* minimum left-sb or top-sb */
FT_Short min_Top_Side_Bearing;
/* minimum right-sb or bottom-sb */
FT_Short min_Bottom_Side_Bearing;
/* xmax or ymax extents */
FT_Short yMax_Extent;
FT_Short caret_Slope_Rise;
FT_Short caret_Slope_Run;
FT_Short caret_Offset;
FT_Short Reserved[4];
FT_Short metric_Data_Format;
FT_UShort number_Of_VMetrics;
/* The following fields are not defined by the TrueType specification */
/* but they're used to connect the metrics header to the relevant */
/* `HMTX' or `VMTX' table. */
void* long_metrics;
void* short_metrics;
} TT_VertHeader;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_OS2 */
/* */
/* <Description> */
/* A structure used to model a TrueType OS/2 table. This is the long */
/* table version. All fields comply to the TrueType specification. */
/* */
/* Note that we now support old Mac fonts which do not include an */
/* OS/2 table. In this case, the `version' field is always set to */
/* 0xFFFF. */
/* */
typedef struct TT_OS2_
{
/* 0x0001 - more or 0xFFFF */
FT_UShort version;
FT_Short xAvgCharWidth;
FT_UShort usWeightClass;
FT_UShort usWidthClass;
FT_Short fsType;
FT_Short ySubscriptXSize;
FT_Short ySubscriptYSize;
FT_Short ySubscriptXOffset;
FT_Short ySubscriptYOffset;
FT_Short ySuperscriptXSize;
FT_Short ySuperscriptYSize;
FT_Short ySuperscriptXOffset;
FT_Short ySuperscriptYOffset;
FT_Short yStrikeoutSize;
FT_Short yStrikeoutPosition;
FT_Short sFamilyClass;
FT_Byte panose[10];
/* Bits 0-31 */
FT_ULong ulUnicodeRange1;
/* Bits 32-63 */
FT_ULong ulUnicodeRange2;
/* Bits 64-95 */
FT_ULong ulUnicodeRange3;
/* Bits 96-127 */
FT_ULong ulUnicodeRange4;
FT_Char achVendID[4];
FT_UShort fsSelection;
FT_UShort usFirstCharIndex;
FT_UShort usLastCharIndex;
FT_Short sTypoAscender;
FT_Short sTypoDescender;
FT_Short sTypoLineGap;
FT_UShort usWinAscent;
FT_UShort usWinDescent;
/* only version 1 tables: */
/* Bits 0-31 */
FT_ULong ulCodePageRange1;
/* Bits 32-63 */
FT_ULong ulCodePageRange2;
/* only version 2 tables: */
FT_Short sxHeight;
FT_Short sCapHeight;
FT_UShort usDefaultChar;
FT_UShort usBreakChar;
FT_UShort usMaxContext;
} TT_OS2;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_Postscript */
/* */
/* <Description> */
/* A structure used to model a TrueType PostScript table. All fields */
/* comply to the TrueType specification. This structure does not */
/* reference the PostScript glyph names, which can be nevertheless */
/* accessed with the `ttpost' module. */
/* */
typedef struct TT_Postscript_
{
FT_Fixed FormatType;
FT_Fixed italicAngle;
FT_Short underlinePosition;
FT_Short underlineThickness;
FT_ULong isFixedPitch;
FT_ULong minMemType42;
FT_ULong maxMemType42;
FT_ULong minMemType1;
FT_ULong maxMemType1;
/* Glyph names follow in the file, but we don't */
/* load them by default. See the ttpost.c file. */
} TT_Postscript;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_PCLT */
/* */
/* <Description> */
/* A structure used to model a TrueType PCLT table. All fields */
/* comply to the TrueType specification. */
/* */
typedef struct TT_PCLT_
{
FT_Fixed Version;
FT_ULong FontNumber;
FT_UShort Pitch;
FT_UShort xHeight;
FT_UShort Style;
FT_UShort TypeFamily;
FT_UShort CapHeight;
FT_UShort SymbolSet;
FT_Char TypeFace[16];
FT_Char CharacterComplement[8];
FT_Char FileName[6];
FT_Char StrokeWeight;
FT_Char WidthType;
FT_Byte SerifStyle;
FT_Byte Reserved;
} TT_PCLT;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_MaxProfile */
/* */
/* <Description> */
/* The maximum profile is a table containing many max values which */
/* can be used to pre-allocate arrays. This ensures that no memory */
/* allocation occurs during a glyph load. */
/* */
/* <Fields> */
/* version :: The version number. */
/* */
/* numGlyphs :: The number of glyphs in this TrueType */
/* font. */
/* */
/* maxPoints :: The maximum number of points in a */
/* non-composite TrueType glyph. See also */
/* the structure element */
/* `maxCompositePoints'. */
/* */
/* maxContours :: The maximum number of contours in a */
/* non-composite TrueType glyph. See also */
/* the structure element */
/* `maxCompositeContours'. */
/* */
/* maxCompositePoints :: The maximum number of points in a */
/* composite TrueType glyph. See also the */
/* structure element `maxPoints'. */
/* */
/* maxCompositeContours :: The maximum number of contours in a */
/* composite TrueType glyph. See also the */
/* structure element `maxContours'. */
/* */
/* maxZones :: The maximum number of zones used for */
/* glyph hinting. */
/* */
/* maxTwilightPoints :: The maximum number of points in the */
/* twilight zone used for glyph hinting. */
/* */
/* maxStorage :: The maximum number of elements in the */
/* storage area used for glyph hinting. */
/* */
/* maxFunctionDefs :: The maximum number of function */
/* definitions in the TrueType bytecode for */
/* this font. */
/* */
/* maxInstructionDefs :: The maximum number of instruction */
/* definitions in the TrueType bytecode for */
/* this font. */
/* */
/* maxStackElements :: The maximum number of stack elements used */
/* during bytecode interpretation. */
/* */
/* maxSizeOfInstructions :: The maximum number of TrueType opcodes */
/* used for glyph hinting. */
/* */
/* maxComponentElements :: The maximum number of simple (i.e., non- */
/* composite) glyphs in a composite glyph. */
/* */
/* maxComponentDepth :: The maximum nesting depth of composite */
/* glyphs. */
/* */
/* <Note> */
/* This structure is only used during font loading. */
/* */
typedef struct TT_MaxProfile_
{
FT_Fixed version;
FT_UShort numGlyphs;
FT_UShort maxPoints;
FT_UShort maxContours;
FT_UShort maxCompositePoints;
FT_UShort maxCompositeContours;
FT_UShort maxZones;
FT_UShort maxTwilightPoints;
FT_UShort maxStorage;
FT_UShort maxFunctionDefs;
FT_UShort maxInstructionDefs;
FT_UShort maxStackElements;
FT_UShort maxSizeOfInstructions;
FT_UShort maxComponentElements;
FT_UShort maxComponentDepth;
} TT_MaxProfile;
/*************************************************************************/
/* */
/* <Enum> */
/* FT_Sfnt_Tag */
/* */
/* <Description> */
/* An enumeration used to specify the index of an SFNT table. */
/* Used in the @FT_Get_Sfnt_Table API function. */
/* */
typedef enum FT_Sfnt_Tag_
{
/* TT_Header */
ft_sfnt_head = 0,
/* TT_MaxProfile */
ft_sfnt_maxp = 1,
/* TT_OS2 */
ft_sfnt_os2 = 2,
/* TT_HoriHeader */
ft_sfnt_hhea = 3,
/* TT_VertHeader */
ft_sfnt_vhea = 4,
/* TT_Postscript */
ft_sfnt_post = 5,
/* TT_PCLT */
ft_sfnt_pclt = 6,
/* internal end mark */
sfnt_max
} FT_Sfnt_Tag;
/* */
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Sfnt_Table */
/* */
/* <Description> */
/* Return a pointer to a given SFNT table within a face. */
/* */
/* <Input> */
/* face :: A handle to the source. */
/* */
/* tag :: The index of the SFNT table. */
/* */
/* <Return> */
/* A type-less pointer to the table. This will be~0 in case of */
/* error, or if the corresponding table was not found *OR* loaded */
/* from the file. */
/* */
/* Use a typecast according to `tag' to access the structure */
/* elements. */
/* */
/* <Note> */
/* The table is owned by the face object and disappears with it. */
/* */
/* This function is only useful to access SFNT tables that are loaded */
/* by the sfnt, truetype, and opentype drivers. See @FT_Sfnt_Tag for */
/* a list. */
/* */
/* Here an example how to access the `vhea' table: */
/* */
/* { */
/* TT_VertHeader* vert_header; */
/* */
/* */
/* vert_header = */
/* (TT_VertHeader*)FT_Get_Sfnt_Table( face, ft_sfnt_vhea ); */
/* } */
/* */
FT_EXPORT( void* )
FT_Get_Sfnt_Table( FT_Face face,
FT_Sfnt_Tag tag );
/**************************************************************************
*
* @function:
* FT_Load_Sfnt_Table
*
* @description:
* Load any font table into client memory.
*
* @input:
* face ::
* A handle to the source face.
*
* tag ::
* The four-byte tag of the table to load. Use the value~0 if you want
* to access the whole font file. Otherwise, you can use one of the
* definitions found in the @FT_TRUETYPE_TAGS_H file, or forge a new
* one with @FT_MAKE_TAG.
*
* offset ::
* The starting offset in the table (or file if tag == 0).
*
* @output:
* buffer ::
* The target buffer address. The client must ensure that the memory
* array is big enough to hold the data.
*
* @inout:
* length ::
* If the `length' parameter is NULL, then try to load the whole table.
* Return an error code if it fails.
*
* Else, if `*length' is~0, exit immediately while returning the
* table's (or file) full size in it.
*
* Else the number of bytes to read from the table or file, from the
* starting offset.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* If you need to determine the table's length you should first call this
* function with `*length' set to~0, as in the following example:
*
* {
* FT_ULong length = 0;
*
*
* error = FT_Load_Sfnt_Table( face, tag, 0, NULL, &length );
* if ( error ) { ... table does not exist ... }
*
* buffer = malloc( length );
* if ( buffer == NULL ) { ... not enough memory ... }
*
* error = FT_Load_Sfnt_Table( face, tag, 0, buffer, &length );
* if ( error ) { ... could not load table ... }
* }
*/
FT_EXPORT( FT_Error )
FT_Load_Sfnt_Table( FT_Face face,
FT_ULong tag,
FT_Long offset,
FT_Byte* buffer,
FT_ULong* length );
/**************************************************************************
*
* @function:
* FT_Sfnt_Table_Info
*
* @description:
* Return information on an SFNT table.
*
* @input:
* face ::
* A handle to the source face.
*
* table_index ::
* The index of an SFNT table. The function returns
* FT_Err_Table_Missing for an invalid value.
*
* @inout:
* tag ::
* The name tag of the SFNT table. If the value is NULL, `table_index'
* is ignored, and `length' returns the number of SFNT tables in the
* font.
*
* @output:
* length ::
* The length of the SFNT table (or the number of SFNT tables, depending
* on `tag').
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* While parsing fonts, FreeType handles SFNT tables with length zero as
* missing.
*
*/
FT_EXPORT( FT_Error )
FT_Sfnt_Table_Info( FT_Face face,
FT_UInt table_index,
FT_ULong *tag,
FT_ULong *length );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_CMap_Language_ID */
/* */
/* <Description> */
/* Return TrueType/sfnt specific cmap language ID. Definitions of */
/* language ID values are in `freetype/ttnameid.h'. */
/* */
/* <Input> */
/* charmap :: */
/* The target charmap. */
/* */
/* <Return> */
/* The language ID of `charmap'. If `charmap' doesn't belong to a */
/* TrueType/sfnt face, just return~0 as the default value. */
/* */
/* For a format~14 cmap (to access Unicode IVS), the return value is */
/* 0xFFFFFFFF. */
/* */
FT_EXPORT( FT_ULong )
FT_Get_CMap_Language_ID( FT_CharMap charmap );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_CMap_Format */
/* */
/* <Description> */
/* Return TrueType/sfnt specific cmap format. */
/* */
/* <Input> */
/* charmap :: */
/* The target charmap. */
/* */
/* <Return> */
/* The format of `charmap'. If `charmap' doesn't belong to a */
/* TrueType/sfnt face, return -1. */
/* */
FT_EXPORT( FT_Long )
FT_Get_CMap_Format( FT_CharMap charmap );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftmm.h */
/* */
/* FreeType Multiple Master font interface (specification). */
/* */
/* Copyright 1996-2001, 2003, 2004, 2006, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTMM_H__
/***************************************************************************/
/* */
/* t1tables.h */
/* */
/* Basic Type 1/Type 2 tables definitions and interface (specification */
/* only). */
/* */
/* Copyright 1996-2004, 2006, 2008, 2009, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1TABLES_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* type1_tables */
/* */
/* <Title> */
/* Type 1 Tables */
/* */
/* <Abstract> */
/* Type~1 (PostScript) specific font tables. */
/* */
/* <Description> */
/* This section contains the definition of Type 1-specific tables, */
/* including structures related to other PostScript font formats. */
/* */
/*************************************************************************/
/* Note that we separate font data in PS_FontInfoRec and PS_PrivateRec */
/* structures in order to support Multiple Master fonts. */
/*************************************************************************/
/* */
/* <Struct> */
/* PS_FontInfoRec */
/* */
/* <Description> */
/* A structure used to model a Type~1 or Type~2 FontInfo dictionary. */
/* Note that for Multiple Master fonts, each instance has its own */
/* FontInfo dictionary. */
/* */
typedef struct PS_FontInfoRec_
{
FT_String* version;
FT_String* notice;
FT_String* full_name;
FT_String* family_name;
FT_String* weight;
FT_Long italic_angle;
FT_Bool is_fixed_pitch;
FT_Short underline_position;
FT_UShort underline_thickness;
} PS_FontInfoRec;
/*************************************************************************/
/* */
/* <Struct> */
/* PS_FontInfo */
/* */
/* <Description> */
/* A handle to a @PS_FontInfoRec structure. */
/* */
typedef struct PS_FontInfoRec_* PS_FontInfo;
/*************************************************************************/
/* */
/* <Struct> */
/* T1_FontInfo */
/* */
/* <Description> */
/* This type is equivalent to @PS_FontInfoRec. It is deprecated but */
/* kept to maintain source compatibility between various versions of */
/* FreeType. */
/* */
typedef PS_FontInfoRec T1_FontInfo;
/*************************************************************************/
/* */
/* <Struct> */
/* PS_PrivateRec */
/* */
/* <Description> */
/* A structure used to model a Type~1 or Type~2 private dictionary. */
/* Note that for Multiple Master fonts, each instance has its own */
/* Private dictionary. */
/* */
typedef struct PS_PrivateRec_
{
FT_Int unique_id;
FT_Int lenIV;
FT_Byte num_blue_values;
FT_Byte num_other_blues;
FT_Byte num_family_blues;
FT_Byte num_family_other_blues;
FT_Short blue_values[14];
FT_Short other_blues[10];
FT_Short family_blues [14];
FT_Short family_other_blues[10];
FT_Fixed blue_scale;
FT_Int blue_shift;
FT_Int blue_fuzz;
FT_UShort standard_width[1];
FT_UShort standard_height[1];
FT_Byte num_snap_widths;
FT_Byte num_snap_heights;
FT_Bool force_bold;
FT_Bool round_stem_up;
/* including std width */
FT_Short snap_widths [13];
/* including std height */
FT_Short snap_heights[13];
FT_Fixed expansion_factor;
FT_Long language_group;
FT_Long password;
FT_Short min_feature[2];
} PS_PrivateRec;
/*************************************************************************/
/* */
/* <Struct> */
/* PS_Private */
/* */
/* <Description> */
/* A handle to a @PS_PrivateRec structure. */
/* */
typedef struct PS_PrivateRec_* PS_Private;
/*************************************************************************/
/* */
/* <Struct> */
/* T1_Private */
/* */
/* <Description> */
/* This type is equivalent to @PS_PrivateRec. It is deprecated but */
/* kept to maintain source compatibility between various versions of */
/* FreeType. */
/* */
typedef PS_PrivateRec T1_Private;
/*************************************************************************/
/* */
/* <Enum> */
/* T1_Blend_Flags */
/* */
/* <Description> */
/* A set of flags used to indicate which fields are present in a */
/* given blend dictionary (font info or private). Used to support */
/* Multiple Masters fonts. */
/* */
typedef enum T1_Blend_Flags_
{
/*# required fields in a FontInfo blend dictionary */
T1_BLEND_UNDERLINE_POSITION = 0,
T1_BLEND_UNDERLINE_THICKNESS,
T1_BLEND_ITALIC_ANGLE,
/*# required fields in a Private blend dictionary */
T1_BLEND_BLUE_VALUES,
T1_BLEND_OTHER_BLUES,
T1_BLEND_STANDARD_WIDTH,
T1_BLEND_STANDARD_HEIGHT,
T1_BLEND_STEM_SNAP_WIDTHS,
T1_BLEND_STEM_SNAP_HEIGHTS,
T1_BLEND_BLUE_SCALE,
T1_BLEND_BLUE_SHIFT,
T1_BLEND_FAMILY_BLUES,
T1_BLEND_FAMILY_OTHER_BLUES,
T1_BLEND_FORCE_BOLD,
/*# never remove */
T1_BLEND_MAX
} T1_Blend_Flags;
/* */
/*# backwards compatible definitions */
#define t1_blend_underline_position T1_BLEND_UNDERLINE_POSITION
#define t1_blend_underline_thickness T1_BLEND_UNDERLINE_THICKNESS
#define t1_blend_italic_angle T1_BLEND_ITALIC_ANGLE
#define t1_blend_blue_values T1_BLEND_BLUE_VALUES
#define t1_blend_other_blues T1_BLEND_OTHER_BLUES
#define t1_blend_standard_widths T1_BLEND_STANDARD_WIDTH
#define t1_blend_standard_height T1_BLEND_STANDARD_HEIGHT
#define t1_blend_stem_snap_widths T1_BLEND_STEM_SNAP_WIDTHS
#define t1_blend_stem_snap_heights T1_BLEND_STEM_SNAP_HEIGHTS
#define t1_blend_blue_scale T1_BLEND_BLUE_SCALE
#define t1_blend_blue_shift T1_BLEND_BLUE_SHIFT
#define t1_blend_family_blues T1_BLEND_FAMILY_BLUES
#define t1_blend_family_other_blues T1_BLEND_FAMILY_OTHER_BLUES
#define t1_blend_force_bold T1_BLEND_FORCE_BOLD
#define t1_blend_max T1_BLEND_MAX
/* maximum number of Multiple Masters designs, as defined in the spec */
#define T1_MAX_MM_DESIGNS 16
/* maximum number of Multiple Masters axes, as defined in the spec */
#define T1_MAX_MM_AXIS 4
/* maximum number of elements in a design map */
#define T1_MAX_MM_MAP_POINTS 20
/* this structure is used to store the BlendDesignMap entry for an axis */
typedef struct PS_DesignMap_
{
FT_Byte num_points;
FT_Long* design_points;
FT_Fixed* blend_points;
} PS_DesignMapRec, *PS_DesignMap;
/* backwards-compatible definition */
typedef PS_DesignMapRec T1_DesignMap;
typedef struct PS_BlendRec_
{
FT_UInt num_designs;
FT_UInt num_axis;
FT_String* axis_names[T1_MAX_MM_AXIS];
FT_Fixed* design_pos[T1_MAX_MM_DESIGNS];
PS_DesignMapRec design_map[T1_MAX_MM_AXIS];
FT_Fixed* weight_vector;
FT_Fixed* default_weight_vector;
PS_FontInfo font_infos[T1_MAX_MM_DESIGNS + 1];
PS_Private privates [T1_MAX_MM_DESIGNS + 1];
FT_ULong blend_bitflags;
FT_BBox* bboxes [T1_MAX_MM_DESIGNS + 1];
/* since 2.3.0 */
/* undocumented, optional: the default design instance; */
/* corresponds to default_weight_vector -- */
/* num_default_design_vector == 0 means it is not present */
/* in the font and associated metrics files */
FT_UInt default_design_vector[T1_MAX_MM_DESIGNS];
FT_UInt num_default_design_vector;
} PS_BlendRec, *PS_Blend;
/* backwards-compatible definition */
typedef PS_BlendRec T1_Blend;
/*************************************************************************/
/* */
/* <Struct> */
/* CID_FaceDictRec */
/* */
/* <Description> */
/* A structure used to represent data in a CID top-level dictionary. */
/* */
typedef struct CID_FaceDictRec_
{
PS_PrivateRec private_dict;
FT_UInt len_buildchar;
FT_Fixed forcebold_threshold;
FT_Pos stroke_width;
FT_Fixed expansion_factor;
FT_Byte paint_type;
FT_Byte font_type;
FT_Matrix font_matrix;
FT_Vector font_offset;
FT_UInt num_subrs;
FT_ULong subrmap_offset;
FT_Int sd_bytes;
} CID_FaceDictRec;
/*************************************************************************/
/* */
/* <Struct> */
/* CID_FaceDict */
/* */
/* <Description> */
/* A handle to a @CID_FaceDictRec structure. */
/* */
typedef struct CID_FaceDictRec_* CID_FaceDict;
/* */
/* backwards-compatible definition */
typedef CID_FaceDictRec CID_FontDict;
/*************************************************************************/
/* */
/* <Struct> */
/* CID_FaceInfoRec */
/* */
/* <Description> */
/* A structure used to represent CID Face information. */
/* */
typedef struct CID_FaceInfoRec_
{
FT_String* cid_font_name;
FT_Fixed cid_version;
FT_Int cid_font_type;
FT_String* registry;
FT_String* ordering;
FT_Int supplement;
PS_FontInfoRec font_info;
FT_BBox font_bbox;
FT_ULong uid_base;
FT_Int num_xuid;
FT_ULong xuid[16];
FT_ULong cidmap_offset;
FT_Int fd_bytes;
FT_Int gd_bytes;
FT_ULong cid_count;
FT_Int num_dicts;
CID_FaceDict font_dicts;
FT_ULong data_offset;
} CID_FaceInfoRec;
/*************************************************************************/
/* */
/* <Struct> */
/* CID_FaceInfo */
/* */
/* <Description> */
/* A handle to a @CID_FaceInfoRec structure. */
/* */
typedef struct CID_FaceInfoRec_* CID_FaceInfo;
/*************************************************************************/
/* */
/* <Struct> */
/* CID_Info */
/* */
/* <Description> */
/* This type is equivalent to @CID_FaceInfoRec. It is deprecated but */
/* kept to maintain source compatibility between various versions of */
/* FreeType. */
/* */
typedef CID_FaceInfoRec CID_Info;
/************************************************************************
*
* @function:
* FT_Has_PS_Glyph_Names
*
* @description:
* Return true if a given face provides reliable PostScript glyph
* names. This is similar to using the @FT_HAS_GLYPH_NAMES macro,
* except that certain fonts (mostly TrueType) contain incorrect
* glyph name tables.
*
* When this function returns true, the caller is sure that the glyph
* names returned by @FT_Get_Glyph_Name are reliable.
*
* @input:
* face ::
* face handle
*
* @return:
* Boolean. True if glyph names are reliable.
*
*/
FT_EXPORT( FT_Int )
FT_Has_PS_Glyph_Names( FT_Face face );
/************************************************************************
*
* @function:
* FT_Get_PS_Font_Info
*
* @description:
* Retrieve the @PS_FontInfoRec structure corresponding to a given
* PostScript font.
*
* @input:
* face ::
* PostScript face handle.
*
* @output:
* afont_info ::
* Output font info structure pointer.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* The string pointers within the font info structure are owned by
* the face and don't need to be freed by the caller.
*
* If the font's format is not PostScript-based, this function will
* return the `FT_Err_Invalid_Argument' error code.
*
*/
FT_EXPORT( FT_Error )
FT_Get_PS_Font_Info( FT_Face face,
PS_FontInfo afont_info );
/************************************************************************
*
* @function:
* FT_Get_PS_Font_Private
*
* @description:
* Retrieve the @PS_PrivateRec structure corresponding to a given
* PostScript font.
*
* @input:
* face ::
* PostScript face handle.
*
* @output:
* afont_private ::
* Output private dictionary structure pointer.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* The string pointers within the @PS_PrivateRec structure are owned by
* the face and don't need to be freed by the caller.
*
* If the font's format is not PostScript-based, this function returns
* the `FT_Err_Invalid_Argument' error code.
*
*/
FT_EXPORT( FT_Error )
FT_Get_PS_Font_Private( FT_Face face,
PS_Private afont_private );
/*************************************************************************/
/* */
/* <Enum> */
/* T1_EncodingType */
/* */
/* <Description> */
/* An enumeration describing the `Encoding' entry in a Type 1 */
/* dictionary. */
/* */
typedef enum T1_EncodingType_
{
T1_ENCODING_TYPE_NONE = 0,
T1_ENCODING_TYPE_ARRAY,
T1_ENCODING_TYPE_STANDARD,
T1_ENCODING_TYPE_ISOLATIN1,
T1_ENCODING_TYPE_EXPERT
} T1_EncodingType;
/*************************************************************************/
/* */
/* <Enum> */
/* PS_Dict_Keys */
/* */
/* <Description> */
/* An enumeration used in calls to @FT_Get_PS_Font_Value to identify */
/* the Type~1 dictionary entry to retrieve. */
/* */
typedef enum PS_Dict_Keys_
{
/* conventionally in the font dictionary */
/* FT_Byte */
PS_DICT_FONT_TYPE,
/* FT_Fixed */
PS_DICT_FONT_MATRIX,
/* FT_Fixed */
PS_DICT_FONT_BBOX,
/* FT_Byte */
PS_DICT_PAINT_TYPE,
/* FT_String* */
PS_DICT_FONT_NAME,
/* FT_Int */
PS_DICT_UNIQUE_ID,
/* FT_Int */
PS_DICT_NUM_CHAR_STRINGS,
/* FT_String* */
PS_DICT_CHAR_STRING_KEY,
/* FT_String* */
PS_DICT_CHAR_STRING,
/* T1_EncodingType */
PS_DICT_ENCODING_TYPE,
/* FT_String* */
PS_DICT_ENCODING_ENTRY,
/* conventionally in the font Private dictionary */
/* FT_Int */
PS_DICT_NUM_SUBRS,
/* FT_String* */
PS_DICT_SUBR,
/* FT_UShort */
PS_DICT_STD_HW,
/* FT_UShort */
PS_DICT_STD_VW,
/* FT_Byte */
PS_DICT_NUM_BLUE_VALUES,
/* FT_Short */
PS_DICT_BLUE_VALUE,
/* FT_Int */
PS_DICT_BLUE_FUZZ,
/* FT_Byte */
PS_DICT_NUM_OTHER_BLUES,
/* FT_Short */
PS_DICT_OTHER_BLUE,
/* FT_Byte */
PS_DICT_NUM_FAMILY_BLUES,
/* FT_Short */
PS_DICT_FAMILY_BLUE,
/* FT_Byte */
PS_DICT_NUM_FAMILY_OTHER_BLUES,
/* FT_Short */
PS_DICT_FAMILY_OTHER_BLUE,
/* FT_Fixed */
PS_DICT_BLUE_SCALE,
/* FT_Int */
PS_DICT_BLUE_SHIFT,
/* FT_Byte */
PS_DICT_NUM_STEM_SNAP_H,
/* FT_Short */
PS_DICT_STEM_SNAP_H,
/* FT_Byte */
PS_DICT_NUM_STEM_SNAP_V,
/* FT_Short */
PS_DICT_STEM_SNAP_V,
/* FT_Bool */
PS_DICT_FORCE_BOLD,
/* FT_Bool */
PS_DICT_RND_STEM_UP,
/* FT_Short */
PS_DICT_MIN_FEATURE,
/* FT_Int */
PS_DICT_LEN_IV,
/* FT_Long */
PS_DICT_PASSWORD,
/* FT_Long */
PS_DICT_LANGUAGE_GROUP,
/* conventionally in the font FontInfo dictionary */
/* FT_String* */
PS_DICT_VERSION,
/* FT_String* */
PS_DICT_NOTICE,
/* FT_String* */
PS_DICT_FULL_NAME,
/* FT_String* */
PS_DICT_FAMILY_NAME,
/* FT_String* */
PS_DICT_WEIGHT,
/* FT_Bool */
PS_DICT_IS_FIXED_PITCH,
/* FT_Short */
PS_DICT_UNDERLINE_POSITION,
/* FT_UShort */
PS_DICT_UNDERLINE_THICKNESS,
/* FT_UShort */
PS_DICT_FS_TYPE,
/* FT_Long */
PS_DICT_ITALIC_ANGLE,
PS_DICT_MAX = PS_DICT_ITALIC_ANGLE
} PS_Dict_Keys;
/************************************************************************
*
* @function:
* FT_Get_PS_Font_Value
*
* @description:
* Retrieve the value for the supplied key from a PostScript font.
*
* @input:
* face ::
* PostScript face handle.
*
* key ::
* An enumeration value representing the dictionary key to retrieve.
*
* idx ::
* For array values, this specifies the index to be returned.
*
* value ::
* A pointer to memory into which to write the value.
*
* valen_len ::
* The size, in bytes, of the memory supplied for the value.
*
* @output:
* value ::
* The value matching the above key, if it exists.
*
* @return:
* The amount of memory (in bytes) required to hold the requested
* value (if it exists, -1 otherwise).
*
* @note:
* The values returned are not pointers into the internal structures of
* the face, but are `fresh' copies, so that the memory containing them
* belongs to the calling application. This also enforces the
* `read-only' nature of these values, i.e., this function cannot be
* used to manipulate the face.
*
* `value' is a void pointer because the values returned can be of
* various types.
*
* If either `value' is NULL or `value_len' is too small, just the
* required memory size for the requested entry is returned.
*
* The `idx' parameter is used, not only to retrieve elements of, for
* example, the FontMatrix or FontBBox, but also to retrieve name keys
* from the CharStrings dictionary, and the charstrings themselves. It
* is ignored for atomic values.
*
* PS_DICT_BLUE_SCALE returns a value that is scaled up by 1000. To
* get the value as in the font stream, you need to divide by
* 65536000.0 (to remove the FT_Fixed scale, and the x1000 scale).
*
* IMPORTANT: Only key/value pairs read by the FreeType interpreter can
* be retrieved. So, for example, PostScript procedures such as NP,
* ND, and RD are not available. Arbitrary keys are, obviously, not be
* available either.
*
* If the font's format is not PostScript-based, this function returns
* the `FT_Err_Invalid_Argument' error code.
*
*/
FT_EXPORT( FT_Long )
FT_Get_PS_Font_Value( FT_Face face,
PS_Dict_Keys key,
FT_UInt idx,
void *value,
FT_Long value_len );
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* multiple_masters */
/* */
/* <Title> */
/* Multiple Masters */
/* */
/* <Abstract> */
/* How to manage Multiple Masters fonts. */
/* */
/* <Description> */
/* The following types and functions are used to manage Multiple */
/* Master fonts, i.e., the selection of specific design instances by */
/* setting design axis coordinates. */
/* */
/* George Williams has extended this interface to make it work with */
/* both Type~1 Multiple Masters fonts and GX distortable (var) */
/* fonts. Some of these routines only work with MM fonts, others */
/* will work with both types. They are similar enough that a */
/* consistent interface makes sense. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* FT_MM_Axis */
/* */
/* <Description> */
/* A simple structure used to model a given axis in design space for */
/* Multiple Masters fonts. */
/* */
/* This structure can't be used for GX var fonts. */
/* */
/* <Fields> */
/* name :: The axis's name. */
/* */
/* minimum :: The axis's minimum design coordinate. */
/* */
/* maximum :: The axis's maximum design coordinate. */
/* */
typedef struct FT_MM_Axis_
{
FT_String* name;
FT_Long minimum;
FT_Long maximum;
} FT_MM_Axis;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Multi_Master */
/* */
/* <Description> */
/* A structure used to model the axes and space of a Multiple Masters */
/* font. */
/* */
/* This structure can't be used for GX var fonts. */
/* */
/* <Fields> */
/* num_axis :: Number of axes. Cannot exceed~4. */
/* */
/* num_designs :: Number of designs; should be normally 2^num_axis */
/* even though the Type~1 specification strangely */
/* allows for intermediate designs to be present. This */
/* number cannot exceed~16. */
/* */
/* axis :: A table of axis descriptors. */
/* */
typedef struct FT_Multi_Master_
{
FT_UInt num_axis;
FT_UInt num_designs;
FT_MM_Axis axis[T1_MAX_MM_AXIS];
} FT_Multi_Master;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Var_Axis */
/* */
/* <Description> */
/* A simple structure used to model a given axis in design space for */
/* Multiple Masters and GX var fonts. */
/* */
/* <Fields> */
/* name :: The axis's name. */
/* Not always meaningful for GX. */
/* */
/* minimum :: The axis's minimum design coordinate. */
/* */
/* def :: The axis's default design coordinate. */
/* FreeType computes meaningful default values for MM; it */
/* is then an integer value, not in 16.16 format. */
/* */
/* maximum :: The axis's maximum design coordinate. */
/* */
/* tag :: The axis's tag (the GX equivalent to `name'). */
/* FreeType provides default values for MM if possible. */
/* */
/* strid :: The entry in `name' table (another GX version of */
/* `name'). */
/* Not meaningful for MM. */
/* */
typedef struct FT_Var_Axis_
{
FT_String* name;
FT_Fixed minimum;
FT_Fixed def;
FT_Fixed maximum;
FT_ULong tag;
FT_UInt strid;
} FT_Var_Axis;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_Var_Named_Style */
/* */
/* <Description> */
/* A simple structure used to model a named style in a GX var font. */
/* */
/* This structure can't be used for MM fonts. */
/* */
/* <Fields> */
/* coords :: The design coordinates for this style. */
/* This is an array with one entry for each axis. */
/* */
/* strid :: The entry in `name' table identifying this style. */
/* */
typedef struct FT_Var_Named_Style_
{
FT_Fixed* coords;
FT_UInt strid;
} FT_Var_Named_Style;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_MM_Var */
/* */
/* <Description> */
/* A structure used to model the axes and space of a Multiple Masters */
/* or GX var distortable font. */
/* */
/* Some fields are specific to one format and not to the other. */
/* */
/* <Fields> */
/* num_axis :: The number of axes. The maximum value is~4 for */
/* MM; no limit in GX. */
/* */
/* num_designs :: The number of designs; should be normally */
/* 2^num_axis for MM fonts. Not meaningful for GX */
/* (where every glyph could have a different */
/* number of designs). */
/* */
/* num_namedstyles :: The number of named styles; only meaningful for */
/* GX which allows certain design coordinates to */
/* have a string ID (in the `name' table) */
/* associated with them. The font can tell the */
/* user that, for example, Weight=1.5 is `Bold'. */
/* */
/* axis :: A table of axis descriptors. */
/* GX fonts contain slightly more data than MM. */
/* */
/* namedstyles :: A table of named styles. */
/* Only meaningful with GX. */
/* */
typedef struct FT_MM_Var_
{
FT_UInt num_axis;
FT_UInt num_designs;
FT_UInt num_namedstyles;
FT_Var_Axis* axis;
FT_Var_Named_Style* namedstyle;
} FT_MM_Var;
/* */
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Multi_Master */
/* */
/* <Description> */
/* Retrieve the Multiple Master descriptor of a given font. */
/* */
/* This function can't be used with GX fonts. */
/* */
/* <Input> */
/* face :: A handle to the source face. */
/* */
/* <Output> */
/* amaster :: The Multiple Masters descriptor. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Get_Multi_Master( FT_Face face,
FT_Multi_Master *amaster );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_MM_Var */
/* */
/* <Description> */
/* Retrieve the Multiple Master/GX var descriptor of a given font. */
/* */
/* <Input> */
/* face :: A handle to the source face. */
/* */
/* <Output> */
/* amaster :: The Multiple Masters/GX var descriptor. */
/* Allocates a data structure, which the user must free */
/* (a single call to FT_FREE will do it). */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Get_MM_Var( FT_Face face,
FT_MM_Var* *amaster );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_MM_Design_Coordinates */
/* */
/* <Description> */
/* For Multiple Masters fonts, choose an interpolated font design */
/* through design coordinates. */
/* */
/* This function can't be used with GX fonts. */
/* */
/* <InOut> */
/* face :: A handle to the source face. */
/* */
/* <Input> */
/* num_coords :: The number of design coordinates (must be equal to */
/* the number of axes in the font). */
/* */
/* coords :: An array of design coordinates. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Set_MM_Design_Coordinates( FT_Face face,
FT_UInt num_coords,
FT_Long* coords );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_Var_Design_Coordinates */
/* */
/* <Description> */
/* For Multiple Master or GX Var fonts, choose an interpolated font */
/* design through design coordinates. */
/* */
/* <InOut> */
/* face :: A handle to the source face. */
/* */
/* <Input> */
/* num_coords :: The number of design coordinates (must be equal to */
/* the number of axes in the font). */
/* */
/* coords :: An array of design coordinates. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Set_Var_Design_Coordinates( FT_Face face,
FT_UInt num_coords,
FT_Fixed* coords );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_MM_Blend_Coordinates */
/* */
/* <Description> */
/* For Multiple Masters and GX var fonts, choose an interpolated font */
/* design through normalized blend coordinates. */
/* */
/* <InOut> */
/* face :: A handle to the source face. */
/* */
/* <Input> */
/* num_coords :: The number of design coordinates (must be equal to */
/* the number of axes in the font). */
/* */
/* coords :: The design coordinates array (each element must be */
/* between 0 and 1.0). */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Set_MM_Blend_Coordinates( FT_Face face,
FT_UInt num_coords,
FT_Fixed* coords );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Set_Var_Blend_Coordinates */
/* */
/* <Description> */
/* This is another name of @FT_Set_MM_Blend_Coordinates. */
/* */
FT_EXPORT( FT_Error )
FT_Set_Var_Blend_Coordinates( FT_Face face,
FT_UInt num_coords,
FT_Fixed* coords );
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** REQUIRED TRUETYPE/OPENTYPE TABLES DEFINITIONS ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* TTC_HeaderRec */
/* */
/* <Description> */
/* TrueType collection header. This table contains the offsets of */
/* the font headers of each distinct TrueType face in the file. */
/* */
/* <Fields> */
/* tag :: Must be `ttc ' to indicate a TrueType collection. */
/* */
/* version :: The version number. */
/* */
/* count :: The number of faces in the collection. The */
/* specification says this should be an unsigned long, but */
/* we use a signed long since we need the value -1 for */
/* specific purposes. */
/* */
/* offsets :: The offsets of the font headers, one per face. */
/* */
typedef struct TTC_HeaderRec_
{
FT_ULong tag;
FT_Fixed version;
FT_Long count;
FT_ULong* offsets;
} TTC_HeaderRec;
/*************************************************************************/
/* */
/* <Struct> */
/* SFNT_HeaderRec */
/* */
/* <Description> */
/* SFNT file format header. */
/* */
/* <Fields> */
/* format_tag :: The font format tag. */
/* */
/* num_tables :: The number of tables in file. */
/* */
/* search_range :: Must be `16 * (max power of 2 <= num_tables)'. */
/* */
/* entry_selector :: Must be log2 of `search_range / 16'. */
/* */
/* range_shift :: Must be `num_tables * 16 - search_range'. */
/* */
typedef struct SFNT_HeaderRec_
{
FT_ULong format_tag;
FT_UShort num_tables;
FT_UShort search_range;
FT_UShort entry_selector;
FT_UShort range_shift;
/* not in file */
FT_ULong offset;
} SFNT_HeaderRec, *SFNT_Header;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_TableRec */
/* */
/* <Description> */
/* This structure describes a given table of a TrueType font. */
/* */
/* <Fields> */
/* Tag :: A four-bytes tag describing the table. */
/* */
/* CheckSum :: The table checksum. This value can be ignored. */
/* */
/* Offset :: The offset of the table from the start of the TrueType */
/* font in its resource. */
/* */
/* Length :: The table length (in bytes). */
/* */
typedef struct TT_TableRec_
{
/* table type */
FT_ULong Tag;
/* table checksum */
FT_ULong CheckSum;
/* table file offset */
FT_ULong Offset;
/* table length */
FT_ULong Length;
} TT_TableRec, *TT_Table;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_LongMetricsRec */
/* */
/* <Description> */
/* A structure modeling the long metrics of the `hmtx' and `vmtx' */
/* TrueType tables. The values are expressed in font units. */
/* */
/* <Fields> */
/* advance :: The advance width or height for the glyph. */
/* */
/* bearing :: The left-side or top-side bearing for the glyph. */
/* */
typedef struct TT_LongMetricsRec_
{
FT_UShort advance;
FT_Short bearing;
} TT_LongMetricsRec, *TT_LongMetrics;
/*************************************************************************/
/* */
/* <Type> */
/* TT_ShortMetrics */
/* */
/* <Description> */
/* A simple type to model the short metrics of the `hmtx' and `vmtx' */
/* tables. */
/* */
typedef FT_Short TT_ShortMetrics;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_NameEntryRec */
/* */
/* <Description> */
/* A structure modeling TrueType name records. Name records are used */
/* to store important strings like family name, style name, */
/* copyright, etc. in _localized_ versions (i.e., language, encoding, */
/* etc). */
/* */
/* <Fields> */
/* platformID :: The ID of the name's encoding platform. */
/* */
/* encodingID :: The platform-specific ID for the name's encoding. */
/* */
/* languageID :: The platform-specific ID for the name's language. */
/* */
/* nameID :: The ID specifying what kind of name this is. */
/* */
/* stringLength :: The length of the string in bytes. */
/* */
/* stringOffset :: The offset to the string in the `name' table. */
/* */
/* string :: A pointer to the string's bytes. Note that these */
/* are usually UTF-16 encoded characters. */
/* */
typedef struct TT_NameEntryRec_
{
FT_UShort platformID;
FT_UShort encodingID;
FT_UShort languageID;
FT_UShort nameID;
FT_UShort stringLength;
FT_ULong stringOffset;
/* this last field is not defined in the spec */
/* but used by the FreeType engine */
FT_Byte* string;
} TT_NameEntryRec, *TT_NameEntry;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_NameTableRec */
/* */
/* <Description> */
/* A structure modeling the TrueType name table. */
/* */
/* <Fields> */
/* format :: The format of the name table. */
/* */
/* numNameRecords :: The number of names in table. */
/* */
/* storageOffset :: The offset of the name table in the `name' */
/* TrueType table. */
/* */
/* names :: An array of name records. */
/* */
/* stream :: the file's input stream. */
/* */
typedef struct TT_NameTableRec_
{
FT_UShort format;
FT_UInt numNameRecords;
FT_UInt storageOffset;
TT_NameEntryRec* names;
FT_Stream stream;
} TT_NameTableRec, *TT_NameTable;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** OPTIONAL TRUETYPE/OPENTYPE TABLES DEFINITIONS ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* TT_GaspRangeRec */
/* */
/* <Description> */
/* A tiny structure used to model a gasp range according to the */
/* TrueType specification. */
/* */
/* <Fields> */
/* maxPPEM :: The maximum ppem value to which `gaspFlag' applies. */
/* */
/* gaspFlag :: A flag describing the grid-fitting and anti-aliasing */
/* modes to be used. */
/* */
typedef struct TT_GaspRangeRec_
{
FT_UShort maxPPEM;
FT_UShort gaspFlag;
} TT_GaspRangeRec, *TT_GaspRange;
#define TT_GASP_GRIDFIT 0x01
#define TT_GASP_DOGRAY 0x02
/*************************************************************************/
/* */
/* <Struct> */
/* TT_GaspRec */
/* */
/* <Description> */
/* A structure modeling the TrueType `gasp' table used to specify */
/* grid-fitting and anti-aliasing behaviour. */
/* */
/* <Fields> */
/* version :: The version number. */
/* */
/* numRanges :: The number of gasp ranges in table. */
/* */
/* gaspRanges :: An array of gasp ranges. */
/* */
typedef struct TT_Gasp_
{
FT_UShort version;
FT_UShort numRanges;
TT_GaspRange gaspRanges;
} TT_GaspRec;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** EMBEDDED BITMAPS SUPPORT ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* TT_SBit_MetricsRec */
/* */
/* <Description> */
/* A structure used to hold the big metrics of a given glyph bitmap */
/* in a TrueType or OpenType font. These are usually found in the */
/* `EBDT' (Microsoft) or `bloc' (Apple) table. */
/* */
/* <Fields> */
/* height :: The glyph height in pixels. */
/* */
/* width :: The glyph width in pixels. */
/* */
/* horiBearingX :: The horizontal left bearing. */
/* */
/* horiBearingY :: The horizontal top bearing. */
/* */
/* horiAdvance :: The horizontal advance. */
/* */
/* vertBearingX :: The vertical left bearing. */
/* */
/* vertBearingY :: The vertical top bearing. */
/* */
/* vertAdvance :: The vertical advance. */
/* */
typedef struct TT_SBit_MetricsRec_
{
FT_Byte height;
FT_Byte width;
FT_Char horiBearingX;
FT_Char horiBearingY;
FT_Byte horiAdvance;
FT_Char vertBearingX;
FT_Char vertBearingY;
FT_Byte vertAdvance;
} TT_SBit_MetricsRec, *TT_SBit_Metrics;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_SBit_SmallMetricsRec */
/* */
/* <Description> */
/* A structure used to hold the small metrics of a given glyph bitmap */
/* in a TrueType or OpenType font. These are usually found in the */
/* `EBDT' (Microsoft) or the `bdat' (Apple) table. */
/* */
/* <Fields> */
/* height :: The glyph height in pixels. */
/* */
/* width :: The glyph width in pixels. */
/* */
/* bearingX :: The left-side bearing. */
/* */
/* bearingY :: The top-side bearing. */
/* */
/* advance :: The advance width or height. */
/* */
typedef struct TT_SBit_Small_Metrics_
{
FT_Byte height;
FT_Byte width;
FT_Char bearingX;
FT_Char bearingY;
FT_Byte advance;
} TT_SBit_SmallMetricsRec, *TT_SBit_SmallMetrics;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_SBit_LineMetricsRec */
/* */
/* <Description> */
/* A structure used to describe the text line metrics of a given */
/* bitmap strike, for either a horizontal or vertical layout. */
/* */
/* <Fields> */
/* ascender :: The ascender in pixels. */
/* */
/* descender :: The descender in pixels. */
/* */
/* max_width :: The maximum glyph width in pixels. */
/* */
/* caret_slope_enumerator :: Rise of the caret slope, typically set */
/* to 1 for non-italic fonts. */
/* */
/* caret_slope_denominator :: Rise of the caret slope, typically set */
/* to 0 for non-italic fonts. */
/* */
/* caret_offset :: Offset in pixels to move the caret for */
/* proper positioning. */
/* */
/* min_origin_SB :: Minimum of horiBearingX (resp. */
/* vertBearingY). */
/* min_advance_SB :: Minimum of */
/* */
/* horizontal advance - */
/* ( horiBearingX + width ) */
/* */
/* resp. */
/* */
/* vertical advance - */
/* ( vertBearingY + height ) */
/* */
/* max_before_BL :: Maximum of horiBearingY (resp. */
/* vertBearingY). */
/* */
/* min_after_BL :: Minimum of */
/* */
/* horiBearingY - height */
/* */
/* resp. */
/* */
/* vertBearingX - width */
/* */
/* pads :: Unused (to make the size of the record */
/* a multiple of 32 bits. */
/* */
typedef struct TT_SBit_LineMetricsRec_
{
FT_Char ascender;
FT_Char descender;
FT_Byte max_width;
FT_Char caret_slope_numerator;
FT_Char caret_slope_denominator;
FT_Char caret_offset;
FT_Char min_origin_SB;
FT_Char min_advance_SB;
FT_Char max_before_BL;
FT_Char min_after_BL;
FT_Char pads[2];
} TT_SBit_LineMetricsRec, *TT_SBit_LineMetrics;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_SBit_RangeRec */
/* */
/* <Description> */
/* A TrueType/OpenType subIndexTable as defined in the `EBLC' */
/* (Microsoft) or `bloc' (Apple) tables. */
/* */
/* <Fields> */
/* first_glyph :: The first glyph index in the range. */
/* */
/* last_glyph :: The last glyph index in the range. */
/* */
/* index_format :: The format of index table. Valid values are 1 */
/* to 5. */
/* */
/* image_format :: The format of `EBDT' image data. */
/* */
/* image_offset :: The offset to image data in `EBDT'. */
/* */
/* image_size :: For index formats 2 and 5. This is the size in */
/* bytes of each glyph bitmap. */
/* */
/* big_metrics :: For index formats 2 and 5. This is the big */
/* metrics for each glyph bitmap. */
/* */
/* num_glyphs :: For index formats 4 and 5. This is the number of */
/* glyphs in the code array. */
/* */
/* glyph_offsets :: For index formats 1 and 3. */
/* */
/* glyph_codes :: For index formats 4 and 5. */
/* */
/* table_offset :: The offset of the index table in the `EBLC' */
/* table. Only used during strike loading. */
/* */
typedef struct TT_SBit_RangeRec_
{
FT_UShort first_glyph;
FT_UShort last_glyph;
FT_UShort index_format;
FT_UShort image_format;
FT_ULong image_offset;
FT_ULong image_size;
TT_SBit_MetricsRec metrics;
FT_ULong num_glyphs;
FT_ULong* glyph_offsets;
FT_UShort* glyph_codes;
FT_ULong table_offset;
} TT_SBit_RangeRec, *TT_SBit_Range;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_SBit_StrikeRec */
/* */
/* <Description> */
/* A structure used describe a given bitmap strike in the `EBLC' */
/* (Microsoft) or `bloc' (Apple) tables. */
/* */
/* <Fields> */
/* num_index_ranges :: The number of index ranges. */
/* */
/* index_ranges :: An array of glyph index ranges. */
/* */
/* color_ref :: Unused. `color_ref' is put in for future */
/* enhancements, but these fields are already */
/* in use by other platforms (e.g. Newton). */
/* For details, please see */
/* */
/* http://fonts.apple.com/ */
/* TTRefMan/RM06/Chap6bloc.html */
/* */
/* hori :: The line metrics for horizontal layouts. */
/* */
/* vert :: The line metrics for vertical layouts. */
/* */
/* start_glyph :: The lowest glyph index for this strike. */
/* */
/* end_glyph :: The highest glyph index for this strike. */
/* */
/* x_ppem :: The number of horizontal pixels per EM. */
/* */
/* y_ppem :: The number of vertical pixels per EM. */
/* */
/* bit_depth :: The bit depth. Valid values are 1, 2, 4, */
/* and 8. */
/* */
/* flags :: Is this a vertical or horizontal strike? For */
/* details, please see */
/* */
/* http://fonts.apple.com/ */
/* TTRefMan/RM06/Chap6bloc.html */
/* */
typedef struct TT_SBit_StrikeRec_
{
FT_Int num_ranges;
TT_SBit_Range sbit_ranges;
FT_ULong ranges_offset;
FT_ULong color_ref;
TT_SBit_LineMetricsRec hori;
TT_SBit_LineMetricsRec vert;
FT_UShort start_glyph;
FT_UShort end_glyph;
FT_Byte x_ppem;
FT_Byte y_ppem;
FT_Byte bit_depth;
FT_Char flags;
} TT_SBit_StrikeRec, *TT_SBit_Strike;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_SBit_ComponentRec */
/* */
/* <Description> */
/* A simple structure to describe a compound sbit element. */
/* */
/* <Fields> */
/* glyph_code :: The element's glyph index. */
/* */
/* x_offset :: The element's left bearing. */
/* */
/* y_offset :: The element's top bearing. */
/* */
typedef struct TT_SBit_ComponentRec_
{
FT_UShort glyph_code;
FT_Char x_offset;
FT_Char y_offset;
} TT_SBit_ComponentRec, *TT_SBit_Component;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_SBit_ScaleRec */
/* */
/* <Description> */
/* A structure used describe a given bitmap scaling table, as defined */
/* in the `EBSC' table. */
/* */
/* <Fields> */
/* hori :: The horizontal line metrics. */
/* */
/* vert :: The vertical line metrics. */
/* */
/* x_ppem :: The number of horizontal pixels per EM. */
/* */
/* y_ppem :: The number of vertical pixels per EM. */
/* */
/* x_ppem_substitute :: Substitution x_ppem value. */
/* */
/* y_ppem_substitute :: Substitution y_ppem value. */
/* */
typedef struct TT_SBit_ScaleRec_
{
TT_SBit_LineMetricsRec hori;
TT_SBit_LineMetricsRec vert;
FT_Byte x_ppem;
FT_Byte y_ppem;
FT_Byte x_ppem_substitute;
FT_Byte y_ppem_substitute;
} TT_SBit_ScaleRec, *TT_SBit_Scale;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** POSTSCRIPT GLYPH NAMES SUPPORT ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* TT_Post_20Rec */
/* */
/* <Description> */
/* Postscript names sub-table, format 2.0. Stores the PS name of */
/* each glyph in the font face. */
/* */
/* <Fields> */
/* num_glyphs :: The number of named glyphs in the table. */
/* */
/* num_names :: The number of PS names stored in the table. */
/* */
/* glyph_indices :: The indices of the glyphs in the names arrays. */
/* */
/* glyph_names :: The PS names not in Mac Encoding. */
/* */
typedef struct TT_Post_20Rec_
{
FT_UShort num_glyphs;
FT_UShort num_names;
FT_UShort* glyph_indices;
FT_Char** glyph_names;
} TT_Post_20Rec, *TT_Post_20;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_Post_25Rec */
/* */
/* <Description> */
/* Postscript names sub-table, format 2.5. Stores the PS name of */
/* each glyph in the font face. */
/* */
/* <Fields> */
/* num_glyphs :: The number of glyphs in the table. */
/* */
/* offsets :: An array of signed offsets in a normal Mac */
/* Postscript name encoding. */
/* */
typedef struct TT_Post_25_
{
FT_UShort num_glyphs;
FT_Char* offsets;
} TT_Post_25Rec, *TT_Post_25;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_Post_NamesRec */
/* */
/* <Description> */
/* Postscript names table, either format 2.0 or 2.5. */
/* */
/* <Fields> */
/* loaded :: A flag to indicate whether the PS names are loaded. */
/* */
/* format_20 :: The sub-table used for format 2.0. */
/* */
/* format_25 :: The sub-table used for format 2.5. */
/* */
typedef struct TT_Post_NamesRec_
{
FT_Bool loaded;
union
{
TT_Post_20Rec format_20;
TT_Post_25Rec format_25;
} names;
} TT_Post_NamesRec, *TT_Post_Names;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** GX VARIATION TABLE SUPPORT ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
typedef struct GX_BlendRec_ *GX_Blend;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** EMBEDDED BDF PROPERTIES TABLE SUPPORT ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*
* These types are used to support a `BDF ' table that isn't part of the
* official TrueType specification. It is mainly used in SFNT-based
* bitmap fonts that were generated from a set of BDF fonts.
*
* The format of the table is as follows.
*
* USHORT version `BDF ' table version number, should be 0x0001.
* USHORT strikeCount Number of strikes (bitmap sizes) in this table.
* ULONG stringTable Offset (from start of BDF table) to string
* table.
*
* This is followed by an array of `strikeCount' descriptors, having the
* following format.
*
* USHORT ppem Vertical pixels per EM for this strike.
* USHORT numItems Number of items for this strike (properties and
* atoms). Maximum is 255.
*
* This array in turn is followed by `strikeCount' value sets. Each
* `value set' is an array of `numItems' items with the following format.
*
* ULONG item_name Offset in string table to item name.
* USHORT item_type The item type. Possible values are
* 0 => string (e.g., COMMENT)
* 1 => atom (e.g., FONT or even SIZE)
* 2 => int32
* 3 => uint32
* 0x10 => A flag to indicate a properties. This
* is ORed with the above values.
* ULONG item_value For strings => Offset into string table without
* the corresponding double quotes.
* For atoms => Offset into string table.
* For integers => Direct value.
*
* All strings in the string table consist of bytes and are
* zero-terminated.
*
*/
typedef struct TT_BDFRec_
{
FT_Byte* table;
FT_Byte* table_end;
FT_Byte* strings;
FT_ULong strings_size;
FT_UInt num_strikes;
FT_Bool loaded;
} TT_BDFRec, *TT_BDF;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** ORIGINAL TT_FACE CLASS DEFINITION ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* This structure/class is defined here because it is common to the */
/* following formats: TTF, OpenType-TT, and OpenType-CFF. */
/* */
/* Note, however, that the classes TT_Size and TT_GlyphSlot are not */
/* shared between font drivers, and are thus defined in `ttobjs.h'. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Type> */
/* TT_Face */
/* */
/* <Description> */
/* A handle to a TrueType face/font object. A TT_Face encapsulates */
/* the resolution and scaling independent parts of a TrueType font */
/* resource. */
/* */
/* <Note> */
/* The TT_Face structure is also used as a `parent class' for the */
/* OpenType-CFF class (T2_Face). */
/* */
typedef struct TT_FaceRec_* TT_Face;
/* a function type used for the truetype bytecode interpreter hooks */
typedef FT_Error
(*TT_Interpreter)( void* exec_context );
/* forward declaration */
typedef struct TT_LoaderRec_* TT_Loader;
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Loader_GotoTableFunc */
/* */
/* <Description> */
/* Seeks a stream to the start of a given TrueType table. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* tag :: A 4-byte tag used to name the table. */
/* */
/* stream :: The input stream. */
/* */
/* <Output> */
/* length :: The length of the table in bytes. Set to 0 if not */
/* needed. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* The stream cursor must be at the font file's origin. */
/* */
typedef FT_Error
(*TT_Loader_GotoTableFunc)( TT_Face face,
FT_ULong tag,
FT_Stream stream,
FT_ULong* length );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Loader_StartGlyphFunc */
/* */
/* <Description> */
/* Seeks a stream to the start of a given glyph element, and opens a */
/* frame for it. */
/* */
/* <Input> */
/* loader :: The current TrueType glyph loader object. */
/* */
/* glyph index :: The index of the glyph to access. */
/* */
/* offset :: The offset of the glyph according to the */
/* `locations' table. */
/* */
/* byte_count :: The size of the frame in bytes. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* This function is normally equivalent to FT_STREAM_SEEK(offset) */
/* followed by FT_FRAME_ENTER(byte_count) with the loader's stream, */
/* but alternative formats (e.g. compressed ones) might use something */
/* different. */
/* */
typedef FT_Error
(*TT_Loader_StartGlyphFunc)( TT_Loader loader,
FT_UInt glyph_index,
FT_ULong offset,
FT_UInt byte_count );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Loader_ReadGlyphFunc */
/* */
/* <Description> */
/* Reads one glyph element (its header, a simple glyph, or a */
/* composite) from the loader's current stream frame. */
/* */
/* <Input> */
/* loader :: The current TrueType glyph loader object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
typedef FT_Error
(*TT_Loader_ReadGlyphFunc)( TT_Loader loader );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Loader_EndGlyphFunc */
/* */
/* <Description> */
/* Closes the current loader stream frame for the glyph. */
/* */
/* <Input> */
/* loader :: The current TrueType glyph loader object. */
/* */
typedef void
(*TT_Loader_EndGlyphFunc)( TT_Loader loader );
/*************************************************************************/
/* */
/* TrueType Face Type */
/* */
/* <Struct> */
/* TT_Face */
/* */
/* <Description> */
/* The TrueType face class. These objects model the resolution and */
/* point-size independent data found in a TrueType font file. */
/* */
/* <Fields> */
/* root :: The base FT_Face structure, managed by the */
/* base layer. */
/* */
/* ttc_header :: The TrueType collection header, used when */
/* the file is a `ttc' rather than a `ttf'. */
/* For ordinary font files, the field */
/* `ttc_header.count' is set to 0. */
/* */
/* format_tag :: The font format tag. */
/* */
/* num_tables :: The number of TrueType tables in this font */
/* file. */
/* */
/* dir_tables :: The directory of TrueType tables for this */
/* font file. */
/* */
/* header :: The font's font header (`head' table). */
/* Read on font opening. */
/* */
/* horizontal :: The font's horizontal header (`hhea' */
/* table). This field also contains the */
/* associated horizontal metrics table */
/* (`hmtx'). */
/* */
/* max_profile :: The font's maximum profile table. Read on */
/* font opening. Note that some maximum */
/* values cannot be taken directly from this */
/* table. We thus define additional fields */
/* below to hold the computed maxima. */
/* */
/* vertical_info :: A boolean which is set when the font file */
/* contains vertical metrics. If not, the */
/* value of the `vertical' field is */
/* undefined. */
/* */
/* vertical :: The font's vertical header (`vhea' table). */
/* This field also contains the associated */
/* vertical metrics table (`vmtx'), if found. */
/* IMPORTANT: The contents of this field is */
/* undefined if the `verticalInfo' field is */
/* unset. */
/* */
/* num_names :: The number of name records within this */
/* TrueType font. */
/* */
/* name_table :: The table of name records (`name'). */
/* */
/* os2 :: The font's OS/2 table (`OS/2'). */
/* */
/* postscript :: The font's PostScript table (`post' */
/* table). The PostScript glyph names are */
/* not loaded by the driver on face opening. */
/* See the `ttpost' module for more details. */
/* */
/* cmap_table :: Address of the face's `cmap' SFNT table */
/* in memory (it's an extracted frame). */
/* */
/* cmap_size :: The size in bytes of the `cmap_table' */
/* described above. */
/* */
/* goto_table :: A function called by each TrueType table */
/* loader to position a stream's cursor to */
/* the start of a given table according to */
/* its tag. It defaults to TT_Goto_Face but */
/* can be different for strange formats (e.g. */
/* Type 42). */
/* */
/* access_glyph_frame :: A function used to access the frame of a */
/* given glyph within the face's font file. */
/* */
/* forget_glyph_frame :: A function used to forget the frame of a */
/* given glyph when all data has been loaded. */
/* */
/* read_glyph_header :: A function used to read a glyph header. */
/* It must be called between an `access' and */
/* `forget'. */
/* */
/* read_simple_glyph :: A function used to read a simple glyph. */
/* It must be called after the header was */
/* read, and before the `forget'. */
/* */
/* read_composite_glyph :: A function used to read a composite glyph. */
/* It must be called after the header was */
/* read, and before the `forget'. */
/* */
/* sfnt :: A pointer to the SFNT service. */
/* */
/* psnames :: A pointer to the PostScript names service. */
/* */
/* hdmx :: The face's horizontal device metrics */
/* (`hdmx' table). This table is optional in */
/* TrueType/OpenType fonts. */
/* */
/* gasp :: The grid-fitting and scaling properties */
/* table (`gasp'). This table is optional in */
/* TrueType/OpenType fonts. */
/* */
/* pclt :: The `pclt' SFNT table. */
/* */
/* num_sbit_strikes :: The number of sbit strikes, i.e., bitmap */
/* sizes, embedded in this font. */
/* */
/* sbit_strikes :: An array of sbit strikes embedded in this */
/* font. This table is optional in a */
/* TrueType/OpenType font. */
/* */
/* num_sbit_scales :: The number of sbit scales for this font. */
/* */
/* sbit_scales :: Array of sbit scales embedded in this */
/* font. This table is optional in a */
/* TrueType/OpenType font. */
/* */
/* postscript_names :: A table used to store the Postscript names */
/* of the glyphs for this font. See the */
/* file `ttconfig.h' for comments on the */
/* TT_CONFIG_OPTION_POSTSCRIPT_NAMES option. */
/* */
/* num_locations :: The number of glyph locations in this */
/* TrueType file. This should be */
/* identical to the number of glyphs. */
/* Ignored for Type 2 fonts. */
/* */
/* glyph_locations :: An array of longs. These are offsets to */
/* glyph data within the `glyf' table. */
/* Ignored for Type 2 font faces. */
/* */
/* glyf_len :: The length of the `glyf' table. Needed */
/* for malformed `loca' tables. */
/* */
/* font_program_size :: Size in bytecodes of the face's font */
/* program. 0 if none defined. Ignored for */
/* Type 2 fonts. */
/* */
/* font_program :: The face's font program (bytecode stream) */
/* executed at load time, also used during */
/* glyph rendering. Comes from the `fpgm' */
/* table. Ignored for Type 2 font fonts. */
/* */
/* cvt_program_size :: The size in bytecodes of the face's cvt */
/* program. Ignored for Type 2 fonts. */
/* */
/* cvt_program :: The face's cvt program (bytecode stream) */
/* executed each time an instance/size is */
/* changed/reset. Comes from the `prep' */
/* table. Ignored for Type 2 fonts. */
/* */
/* cvt_size :: Size of the control value table (in */
/* entries). Ignored for Type 2 fonts. */
/* */
/* cvt :: The face's original control value table. */
/* Coordinates are expressed in unscaled font */
/* units. Comes from the `cvt ' table. */
/* Ignored for Type 2 fonts. */
/* */
/* num_kern_pairs :: The number of kerning pairs present in the */
/* font file. The engine only loads the */
/* first horizontal format 0 kern table it */
/* finds in the font file. Ignored for */
/* Type 2 fonts. */
/* */
/* kern_table_index :: The index of the kerning table in the font */
/* kerning directory. Ignored for Type 2 */
/* fonts. */
/* */
/* interpreter :: A pointer to the TrueType bytecode */
/* interpreters field is also used to hook */
/* the debugger in `ttdebug'. */
/* */
/* unpatented_hinting :: If true, use only unpatented methods in */
/* the bytecode interpreter. */
/* */
/* doblend :: A boolean which is set if the font should */
/* be blended (this is for GX var). */
/* */
/* blend :: Contains the data needed to control GX */
/* variation tables (rather like Multiple */
/* Master data). */
/* */
/* extra :: Reserved for third-party font drivers. */
/* */
/* postscript_name :: The PS name of the font. Used by the */
/* postscript name service. */
/* */
typedef struct TT_FaceRec_
{
FT_FaceRec root;
TTC_HeaderRec ttc_header;
FT_ULong format_tag;
FT_UShort num_tables;
TT_Table dir_tables;
/* TrueType header table */
TT_Header header;
/* TrueType horizontal header */
TT_HoriHeader horizontal;
TT_MaxProfile max_profile;
FT_Bool vertical_info;
/* TT Vertical header, if present */
TT_VertHeader vertical;
/* number of name records */
FT_UShort num_names;
/* name table */
TT_NameTableRec name_table;
/* TrueType OS/2 table */
TT_OS2 os2;
/* TrueType Postscript table */
TT_Postscript postscript;
/* extracted `cmap' table */
FT_Byte* cmap_table;
FT_ULong cmap_size;
TT_Loader_GotoTableFunc goto_table;
TT_Loader_StartGlyphFunc access_glyph_frame;
TT_Loader_EndGlyphFunc forget_glyph_frame;
TT_Loader_ReadGlyphFunc read_glyph_header;
TT_Loader_ReadGlyphFunc read_simple_glyph;
TT_Loader_ReadGlyphFunc read_composite_glyph;
/* a typeless pointer to the SFNT_Interface table used to load */
/* the basic TrueType tables in the face object */
void* sfnt;
/* a typeless pointer to the FT_Service_PsCMapsRec table used to */
/* handle glyph names <-> unicode & Mac values */
void* psnames;
/***********************************************************************/
/* */
/* Optional TrueType/OpenType tables */
/* */
/***********************************************************************/
/* horizontal device metrics */
/* grid-fitting and scaling table */
/* the `gasp' table */
TT_GaspRec gasp;
/* PCL 5 table */
TT_PCLT pclt;
/* embedded bitmaps support */
FT_ULong num_sbit_scales;
TT_SBit_Scale sbit_scales;
/* postscript names table */
TT_Post_NamesRec postscript_names;
/***********************************************************************/
/* */
/* TrueType-specific fields (ignored by the OTF-Type2 driver) */
/* */
/***********************************************************************/
/* the glyph locations */
/* the font program, if any */
FT_ULong font_program_size;
FT_Byte* font_program;
/* the cvt program, if any */
FT_ULong cvt_program_size;
FT_Byte* cvt_program;
/* the original, unscaled, control value table */
FT_ULong cvt_size;
FT_Short* cvt;
/* A pointer to the bytecode interpreter to use. This is also */
/* used to hook the debugger for the `ttdebug' utility. */
TT_Interpreter interpreter;
/***********************************************************************/
/* */
/* Other tables or fields. This is used by derivative formats like */
/* OpenType. */
/* */
/***********************************************************************/
FT_Generic extra;
const char* postscript_name;
/* since version 2.1.8, but was originally placed after */
/* `glyph_locations_stub' */
FT_ULong glyf_len;
/* since version 2.1.8, but was originally placed before `extra' */
FT_Bool doblend;
GX_Blend blend;
/* since version 2.2 */
FT_Byte* horz_metrics;
FT_ULong horz_metrics_size;
FT_Byte* vert_metrics;
FT_ULong vert_metrics_size;
/* in broken TTF, gid > 0xFFFF */
FT_ULong num_locations;
FT_Byte* glyph_locations;
FT_Byte* hdmx_table;
FT_ULong hdmx_table_size;
FT_UInt hdmx_record_count;
FT_ULong hdmx_record_size;
FT_Byte* hdmx_record_sizes;
FT_Byte* sbit_table;
FT_ULong sbit_table_size;
FT_UInt sbit_num_strikes;
FT_Byte* kern_table;
FT_ULong kern_table_size;
FT_UInt num_kern_tables;
FT_UInt32 kern_avail_bits;
FT_UInt32 kern_order_bits;
TT_BDFRec bdf;
/* since 2.3.0 */
FT_ULong horz_metrics_offset;
FT_ULong vert_metrics_offset;
} TT_FaceRec;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_GlyphZoneRec */
/* */
/* <Description> */
/* A glyph zone is used to load, scale and hint glyph outline */
/* coordinates. */
/* */
/* <Fields> */
/* memory :: A handle to the memory manager. */
/* */
/* max_points :: The maximum size in points of the zone. */
/* */
/* max_contours :: Max size in links contours of the zone. */
/* */
/* n_points :: The current number of points in the zone. */
/* */
/* n_contours :: The current number of contours in the zone. */
/* */
/* org :: The original glyph coordinates (font */
/* units/scaled). */
/* */
/* cur :: The current glyph coordinates (scaled/hinted). */
/* */
/* tags :: The point control tags. */
/* */
/* contours :: The contours end points. */
/* */
/* first_point :: Offset of the current subglyph's first point. */
/* */
typedef struct TT_GlyphZoneRec_
{
FT_Memory memory;
FT_UShort max_points;
FT_UShort max_contours;
/* number of points in zone */
FT_UShort n_points;
/* number of contours */
FT_Short n_contours;
/* original point coordinates */
FT_Vector* org;
/* current point coordinates */
FT_Vector* cur;
/* original (unscaled) point coordinates */
FT_Vector* orus;
/* current touch flags */
FT_Byte* tags;
/* contour end points */
FT_UShort* contours;
/* offset of first (#0) point */
FT_UShort first_point;
} TT_GlyphZoneRec, *TT_GlyphZone;
/* handle to execution context */
typedef struct TT_ExecContextRec_* TT_ExecContext;
/* glyph loader structure */
typedef struct TT_LoaderRec_
{
FT_Face face;
FT_Size size;
FT_GlyphSlot glyph;
FT_GlyphLoader gloader;
FT_ULong load_flags;
FT_UInt glyph_index;
FT_Stream stream;
FT_Int byte_len;
FT_Short n_contours;
FT_BBox bbox;
FT_Int left_bearing;
FT_Int advance;
FT_Int linear;
FT_Bool linear_def;
FT_Bool preserve_pps;
FT_Vector pp1;
FT_Vector pp2;
FT_ULong glyf_offset;
/* the zone where we load our glyphs */
TT_GlyphZoneRec base;
TT_GlyphZoneRec zone;
TT_ExecContext exec;
FT_Byte* instructions;
FT_ULong ins_pos;
/* for possible extensibility in other formats */
void* other;
/* since version 2.1.8 */
FT_Int top_bearing;
FT_Int vadvance;
FT_Vector pp3;
FT_Vector pp4;
/* since version 2.2.1 */
FT_Byte* cursor;
FT_Byte* limit;
} TT_LoaderRec;
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Init_Face_Func */
/* */
/* <Description> */
/* First part of the SFNT face object initialization. This finds */
/* the face in a SFNT file or collection, and load its format tag in */
/* face->format_tag. */
/* */
/* <Input> */
/* stream :: The input stream. */
/* */
/* face :: A handle to the target face object. */
/* */
/* face_index :: The index of the TrueType font, if we are opening a */
/* collection. */
/* */
/* num_params :: The number of additional parameters. */
/* */
/* params :: Optional additional parameters. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* The stream cursor must be at the font file's origin. */
/* */
/* This function recognizes fonts embedded in a `TrueType */
/* collection'. */
/* */
/* Once the format tag has been validated by the font driver, it */
/* should then call the TT_Load_Face_Func() callback to read the rest */
/* of the SFNT tables in the object. */
/* */
typedef FT_Error
(*TT_Init_Face_Func)( FT_Stream stream,
TT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Load_Face_Func */
/* */
/* <Description> */
/* Second part of the SFNT face object initialization. This loads */
/* the common SFNT tables (head, OS/2, maxp, metrics, etc.) in the */
/* face object. */
/* */
/* <Input> */
/* stream :: The input stream. */
/* */
/* face :: A handle to the target face object. */
/* */
/* face_index :: The index of the TrueType font, if we are opening a */
/* collection. */
/* */
/* num_params :: The number of additional parameters. */
/* */
/* params :: Optional additional parameters. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* This function must be called after TT_Init_Face_Func(). */
/* */
typedef FT_Error
(*TT_Load_Face_Func)( FT_Stream stream,
TT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Done_Face_Func */
/* */
/* <Description> */
/* A callback used to delete the common SFNT data from a face. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* <Note> */
/* This function does NOT destroy the face object. */
/* */
typedef void
(*TT_Done_Face_Func)( TT_Face face );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Load_Any_Func */
/* */
/* <Description> */
/* Load any font table into client memory. */
/* */
/* <Input> */
/* face :: The face object to look for. */
/* */
/* tag :: The tag of table to load. Use the value 0 if you want */
/* to access the whole font file, else set this parameter */
/* to a valid TrueType table tag that you can forge with */
/* the MAKE_TT_TAG macro. */
/* */
/* offset :: The starting offset in the table (or the file if */
/* tag == 0). */
/* */
/* length :: The address of the decision variable: */
/* */
/* If length == NULL: */
/* Loads the whole table. Returns an error if */
/* `offset' == 0! */
/* */
/* If *length == 0: */
/* Exits immediately; returning the length of the given */
/* table or of the font file, depending on the value of */
/* `tag'. */
/* */
/* If *length != 0: */
/* Loads the next `length' bytes of table or font, */
/* starting at offset `offset' (in table or font too). */
/* */
/* <Output> */
/* buffer :: The address of target buffer. */
/* */
/* <Return> */
/* TrueType error code. 0 means success. */
/* */
typedef FT_Error
(*TT_Load_Any_Func)( TT_Face face,
FT_ULong tag,
FT_Long offset,
FT_Byte *buffer,
FT_ULong* length );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Find_SBit_Image_Func */
/* */
/* <Description> */
/* Check whether an embedded bitmap (an `sbit') exists for a given */
/* glyph, at a given strike. */
/* */
/* <Input> */
/* face :: The target face object. */
/* */
/* glyph_index :: The glyph index. */
/* */
/* strike_index :: The current strike index. */
/* */
/* <Output> */
/* arange :: The SBit range containing the glyph index. */
/* */
/* astrike :: The SBit strike containing the glyph index. */
/* */
/* aglyph_offset :: The offset of the glyph data in `EBDT' table. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. Returns */
/* SFNT_Err_Invalid_Argument if no sbit exists for the requested */
/* glyph. */
/* */
typedef FT_Error
(*TT_Find_SBit_Image_Func)( TT_Face face,
FT_UInt glyph_index,
FT_ULong strike_index,
TT_SBit_Range *arange,
TT_SBit_Strike *astrike,
FT_ULong *aglyph_offset );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Load_SBit_Metrics_Func */
/* */
/* <Description> */
/* Get the big metrics for a given embedded bitmap. */
/* */
/* <Input> */
/* stream :: The input stream. */
/* */
/* range :: The SBit range containing the glyph. */
/* */
/* <Output> */
/* big_metrics :: A big SBit metrics structure for the glyph. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* The stream cursor must be positioned at the glyph's offset within */
/* the `EBDT' table before the call. */
/* */
/* If the image format uses variable metrics, the stream cursor is */
/* positioned just after the metrics header in the `EBDT' table on */
/* function exit. */
/* */
typedef FT_Error
(*TT_Load_SBit_Metrics_Func)( FT_Stream stream,
TT_SBit_Range range,
TT_SBit_Metrics metrics );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Load_SBit_Image_Func */
/* */
/* <Description> */
/* Load a given glyph sbit image from the font resource. This also */
/* returns its metrics. */
/* */
/* <Input> */
/* face :: */
/* The target face object. */
/* */
/* strike_index :: */
/* The strike index. */
/* */
/* glyph_index :: */
/* The current glyph index. */
/* */
/* load_flags :: */
/* The current load flags. */
/* */
/* stream :: */
/* The input stream. */
/* */
/* <Output> */
/* amap :: */
/* The target pixmap. */
/* */
/* ametrics :: */
/* A big sbit metrics structure for the glyph image. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. Returns an error if no */
/* glyph sbit exists for the index. */
/* */
/* <Note> */
/* The `map.buffer' field is always freed before the glyph is loaded. */
/* */
typedef FT_Error
(*TT_Load_SBit_Image_Func)( TT_Face face,
FT_ULong strike_index,
FT_UInt glyph_index,
FT_UInt load_flags,
FT_Stream stream,
FT_Bitmap *amap,
TT_SBit_MetricsRec *ametrics );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Set_SBit_Strike_Func */
/* */
/* <Description> */
/* Select an sbit strike for a given size request. */
/* */
/* <Input> */
/* face :: The target face object. */
/* */
/* req :: The size request. */
/* */
/* <Output> */
/* astrike_index :: The index of the sbit strike. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. Returns an error if no */
/* sbit strike exists for the selected ppem values. */
/* */
typedef FT_Error
(*TT_Set_SBit_Strike_Func)( TT_Face face,
FT_Size_Request req,
FT_ULong* astrike_index );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Load_Strike_Metrics_Func */
/* */
/* <Description> */
/* Load the metrics of a given strike. */
/* */
/* <Input> */
/* face :: The target face object. */
/* */
/* strike_index :: The strike index. */
/* */
/* <Output> */
/* metrics :: the metrics of the strike. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. Returns an error if no */
/* such sbit strike exists. */
/* */
typedef FT_Error
(*TT_Load_Strike_Metrics_Func)( TT_Face face,
FT_ULong strike_index,
FT_Size_Metrics* metrics );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Get_PS_Name_Func */
/* */
/* <Description> */
/* Get the PostScript glyph name of a glyph. */
/* */
/* <Input> */
/* idx :: The glyph index. */
/* */
/* PSname :: The address of a string pointer. Will be NULL in case */
/* of error, otherwise it is a pointer to the glyph name. */
/* */
/* You must not modify the returned string! */
/* */
/* <Output> */
/* FreeType error code. 0 means success. */
/* */
typedef FT_Error
(*TT_Get_PS_Name_Func)( TT_Face face,
FT_UInt idx,
FT_String** PSname );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Load_Metrics_Func */
/* */
/* <Description> */
/* Load a metrics table, which is a table with a horizontal and a */
/* vertical version. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* vertical :: A boolean flag. If set, load the vertical one. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
typedef FT_Error
(*TT_Load_Metrics_Func)( TT_Face face,
FT_Stream stream,
FT_Bool vertical );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Get_Metrics_Func */
/* */
/* <Description> */
/* Load the horizontal or vertical header in a face object. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* vertical :: A boolean flag. If set, load vertical metrics. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
typedef FT_Error
(*TT_Get_Metrics_Func)( TT_Face face,
FT_Bool vertical,
FT_UInt gindex,
FT_Short* abearing,
FT_UShort* aadvance );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Load_Table_Func */
/* */
/* <Description> */
/* Load a given TrueType table. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* The function uses `face->goto_table' to seek the stream to the */
/* start of the table, except while loading the font directory. */
/* */
typedef FT_Error
(*TT_Load_Table_Func)( TT_Face face,
FT_Stream stream );
/*************************************************************************/
/* */
/* <FuncType> */
/* TT_Free_Table_Func */
/* */
/* <Description> */
/* Free a given TrueType table. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
typedef void
(*TT_Free_Table_Func)( TT_Face face );
/*
* @functype:
* TT_Face_GetKerningFunc
*
* @description:
* Return the horizontal kerning value between two glyphs.
*
* @input:
* face :: A handle to the source face object.
* left_glyph :: The left glyph index.
* right_glyph :: The right glyph index.
*
* @return:
* The kerning value in font units.
*/
typedef FT_Int
(*TT_Face_GetKerningFunc)( TT_Face face,
FT_UInt left_glyph,
FT_UInt right_glyph );
/*************************************************************************/
/* */
/* <Struct> */
/* SFNT_Interface */
/* */
/* <Description> */
/* This structure holds pointers to the functions used to load and */
/* free the basic tables that are required in a `sfnt' font file. */
/* */
/* <Fields> */
/* Check the various xxx_Func() descriptions for details. */
/* */
typedef struct SFNT_Interface_
{
TT_Loader_GotoTableFunc goto_table;
TT_Init_Face_Func init_face;
TT_Load_Face_Func load_face;
TT_Done_Face_Func done_face;
FT_Module_Requester get_interface;
TT_Load_Any_Func load_any;
/* these functions are called by `load_face' but they can also */
/* be called from external modules, if there is a need to do so */
TT_Load_Table_Func load_head;
TT_Load_Metrics_Func load_hhea;
TT_Load_Table_Func load_cmap;
TT_Load_Table_Func load_maxp;
TT_Load_Table_Func load_os2;
TT_Load_Table_Func load_post;
TT_Load_Table_Func load_name;
TT_Free_Table_Func free_name;
/* optional tables */
/* this field was called `load_kerning' up to version 2.1.10 */
TT_Load_Table_Func load_kern;
TT_Load_Table_Func load_gasp;
TT_Load_Table_Func load_pclt;
/* see `ttload.h'; this field was called `load_bitmap_header' up to */
/* version 2.1.10 */
TT_Load_Table_Func load_bhed;
TT_Load_SBit_Image_Func load_sbit_image;
/* see `ttpost.h' */
TT_Get_PS_Name_Func get_psname;
TT_Free_Table_Func free_psnames;
/* starting here, the structure differs from version 2.1.7 */
/* this field was introduced in version 2.1.8, named `get_psname' */
TT_Face_GetKerningFunc get_kerning;
/* new elements introduced after version 2.1.10 */
/* load the font directory, i.e., the offset table and */
/* the table directory */
TT_Load_Table_Func load_font_dir;
TT_Load_Metrics_Func load_hmtx;
TT_Load_Table_Func load_eblc;
TT_Free_Table_Func free_eblc;
TT_Set_SBit_Strike_Func set_sbit_strike;
TT_Load_Strike_Metrics_Func load_strike_metrics;
TT_Get_Metrics_Func get_metrics;
} SFNT_Interface;
/* transitional */
typedef SFNT_Interface* SFNT_Service;
/* empty */
#define FT_DEFINE_DRIVERS_OLD_INTERNAL( a )
#define FT_INTERNAL( a ) \
a,
#define FT_DEFINE_SFNT_INTERFACE( \
class_, \
goto_table_, \
init_face_, \
load_face_, \
done_face_, \
get_interface_, \
load_any_, \
load_sfnt_header_, \
load_directory_, \
load_head_, \
load_hhea_, \
load_cmap_, \
load_maxp_, \
load_os2_, \
load_post_, \
load_name_, \
free_name_, \
load_hdmx_stub_, \
free_hdmx_stub_, \
load_kern_, \
load_gasp_, \
load_pclt_, \
load_bhed_, \
set_sbit_strike_stub_, \
load_sbits_stub_, \
find_sbit_image_, \
load_sbit_metrics_, \
load_sbit_image_, \
free_sbits_stub_, \
get_psname_, \
free_psnames_, \
load_charmap_stub_, \
free_charmap_stub_, \
get_kerning_, \
load_font_dir_, \
load_hmtx_, \
load_eblc_, \
free_eblc_, \
set_sbit_strike_, \
load_strike_metrics_, \
get_metrics_ ) \
static const SFNT_Interface class_ = \
{ \
FT_INTERNAL( goto_table_ ) \
FT_INTERNAL( init_face_ ) \
FT_INTERNAL( load_face_ ) \
FT_INTERNAL( done_face_ ) \
FT_INTERNAL( get_interface_ ) \
FT_INTERNAL( load_any_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( load_sfnt_header_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( load_directory_ ) \
FT_INTERNAL( load_head_ ) \
FT_INTERNAL( load_hhea_ ) \
FT_INTERNAL( load_cmap_ ) \
FT_INTERNAL( load_maxp_ ) \
FT_INTERNAL( load_os2_ ) \
FT_INTERNAL( load_post_ ) \
FT_INTERNAL( load_name_ ) \
FT_INTERNAL( free_name_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( load_hdmx_stub_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( free_hdmx_stub_ ) \
FT_INTERNAL( load_kern_ ) \
FT_INTERNAL( load_gasp_ ) \
FT_INTERNAL( load_pclt_ ) \
FT_INTERNAL( load_bhed_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( set_sbit_strike_stub_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( load_sbits_stub_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( find_sbit_image_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( load_sbit_metrics_ ) \
FT_INTERNAL( load_sbit_image_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( free_sbits_stub_ ) \
FT_INTERNAL( get_psname_ ) \
FT_INTERNAL( free_psnames_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( load_charmap_stub_ ) \
FT_DEFINE_DRIVERS_OLD_INTERNAL( free_charmap_stub_ ) \
FT_INTERNAL( get_kerning_ ) \
FT_INTERNAL( load_font_dir_ ) \
FT_INTERNAL( load_hmtx_ ) \
FT_INTERNAL( load_eblc_ ) \
FT_INTERNAL( free_eblc_ ) \
FT_INTERNAL( set_sbit_strike_ ) \
FT_INTERNAL( load_strike_metrics_ ) \
FT_INTERNAL( get_metrics_ ) \
};
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* tttags.h */
/* */
/* Tags for TrueType and OpenType tables (specification only). */
/* */
/* Copyright 1996-2001, 2004, 2005, 2007, 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef __TTAGS_H__
#define __TTAGS_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
#define TTAG_avar FT_MAKE_TAG( 'a', 'v', 'a', 'r' )
#define TTAG_BASE FT_MAKE_TAG( 'B', 'A', 'S', 'E' )
#define TTAG_bdat FT_MAKE_TAG( 'b', 'd', 'a', 't' )
#define TTAG_BDF FT_MAKE_TAG( 'B', 'D', 'F', ' ' )
#define TTAG_bhed FT_MAKE_TAG( 'b', 'h', 'e', 'd' )
#define TTAG_bloc FT_MAKE_TAG( 'b', 'l', 'o', 'c' )
#define TTAG_bsln FT_MAKE_TAG( 'b', 's', 'l', 'n' )
#define TTAG_CFF FT_MAKE_TAG( 'C', 'F', 'F', ' ' )
#define TTAG_CID FT_MAKE_TAG( 'C', 'I', 'D', ' ' )
#define TTAG_cmap FT_MAKE_TAG( 'c', 'm', 'a', 'p' )
#define TTAG_cvar FT_MAKE_TAG( 'c', 'v', 'a', 'r' )
#define TTAG_cvt FT_MAKE_TAG( 'c', 'v', 't', ' ' )
#define TTAG_DSIG FT_MAKE_TAG( 'D', 'S', 'I', 'G' )
#define TTAG_EBDT FT_MAKE_TAG( 'E', 'B', 'D', 'T' )
#define TTAG_EBLC FT_MAKE_TAG( 'E', 'B', 'L', 'C' )
#define TTAG_EBSC FT_MAKE_TAG( 'E', 'B', 'S', 'C' )
#define TTAG_feat FT_MAKE_TAG( 'f', 'e', 'a', 't' )
#define TTAG_FOND FT_MAKE_TAG( 'F', 'O', 'N', 'D' )
#define TTAG_fpgm FT_MAKE_TAG( 'f', 'p', 'g', 'm' )
#define TTAG_fvar FT_MAKE_TAG( 'f', 'v', 'a', 'r' )
#define TTAG_gasp FT_MAKE_TAG( 'g', 'a', 's', 'p' )
#define TTAG_GDEF FT_MAKE_TAG( 'G', 'D', 'E', 'F' )
#define TTAG_glyf FT_MAKE_TAG( 'g', 'l', 'y', 'f' )
#define TTAG_GPOS FT_MAKE_TAG( 'G', 'P', 'O', 'S' )
#define TTAG_GSUB FT_MAKE_TAG( 'G', 'S', 'U', 'B' )
#define TTAG_gvar FT_MAKE_TAG( 'g', 'v', 'a', 'r' )
#define TTAG_hdmx FT_MAKE_TAG( 'h', 'd', 'm', 'x' )
#define TTAG_head FT_MAKE_TAG( 'h', 'e', 'a', 'd' )
#define TTAG_hhea FT_MAKE_TAG( 'h', 'h', 'e', 'a' )
#define TTAG_hmtx FT_MAKE_TAG( 'h', 'm', 't', 'x' )
#define TTAG_JSTF FT_MAKE_TAG( 'J', 'S', 'T', 'F' )
#define TTAG_just FT_MAKE_TAG( 'j', 'u', 's', 't' )
#define TTAG_kern FT_MAKE_TAG( 'k', 'e', 'r', 'n' )
#define TTAG_lcar FT_MAKE_TAG( 'l', 'c', 'a', 'r' )
#define TTAG_loca FT_MAKE_TAG( 'l', 'o', 'c', 'a' )
#define TTAG_LTSH FT_MAKE_TAG( 'L', 'T', 'S', 'H' )
#define TTAG_LWFN FT_MAKE_TAG( 'L', 'W', 'F', 'N' )
#define TTAG_MATH FT_MAKE_TAG( 'M', 'A', 'T', 'H' )
#define TTAG_maxp FT_MAKE_TAG( 'm', 'a', 'x', 'p' )
#define TTAG_META FT_MAKE_TAG( 'M', 'E', 'T', 'A' )
#define TTAG_MMFX FT_MAKE_TAG( 'M', 'M', 'F', 'X' )
#define TTAG_MMSD FT_MAKE_TAG( 'M', 'M', 'S', 'D' )
#define TTAG_mort FT_MAKE_TAG( 'm', 'o', 'r', 't' )
#define TTAG_morx FT_MAKE_TAG( 'm', 'o', 'r', 'x' )
#define TTAG_name FT_MAKE_TAG( 'n', 'a', 'm', 'e' )
#define TTAG_opbd FT_MAKE_TAG( 'o', 'p', 'b', 'd' )
#define TTAG_OS2 FT_MAKE_TAG( 'O', 'S', '/', '2' )
#define TTAG_OTTO FT_MAKE_TAG( 'O', 'T', 'T', 'O' )
#define TTAG_PCLT FT_MAKE_TAG( 'P', 'C', 'L', 'T' )
#define TTAG_POST FT_MAKE_TAG( 'P', 'O', 'S', 'T' )
#define TTAG_post FT_MAKE_TAG( 'p', 'o', 's', 't' )
#define TTAG_prep FT_MAKE_TAG( 'p', 'r', 'e', 'p' )
#define TTAG_prop FT_MAKE_TAG( 'p', 'r', 'o', 'p' )
#define TTAG_sfnt FT_MAKE_TAG( 's', 'f', 'n', 't' )
#define TTAG_SING FT_MAKE_TAG( 'S', 'I', 'N', 'G' )
#define TTAG_trak FT_MAKE_TAG( 't', 'r', 'a', 'k' )
#define TTAG_true FT_MAKE_TAG( 't', 'r', 'u', 'e' )
#define TTAG_ttc FT_MAKE_TAG( 't', 't', 'c', ' ' )
#define TTAG_ttcf FT_MAKE_TAG( 't', 't', 'c', 'f' )
#define TTAG_TYP1 FT_MAKE_TAG( 'T', 'Y', 'P', '1' )
#define TTAG_typ1 FT_MAKE_TAG( 't', 'y', 'p', '1' )
#define TTAG_VDMX FT_MAKE_TAG( 'V', 'D', 'M', 'X' )
#define TTAG_vhea FT_MAKE_TAG( 'v', 'h', 'e', 'a' )
#define TTAG_vmtx FT_MAKE_TAG( 'v', 'm', 't', 'x' )
FT_END_HEADER
/* __TTAGS_H__ */
#endif
/* END */
/***************************************************************************/
/* */
/* ttnameid.h */
/* */
/* TrueType name ID definitions (specification only). */
/* */
/* Copyright 1996-2004, 2006-2008, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTNAMEID_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* truetype_tables */
/* */
/*************************************************************************/
/* */
/* Possible values for the `platform' identifier code in the name */
/* records of the TTF `name' table. */
/* */
/*************************************************************************/
/***********************************************************************
*
* @enum:
* TT_PLATFORM_XXX
*
* @description:
* A list of valid values for the `platform_id' identifier code in
* @FT_CharMapRec and @FT_SfntName structures.
*
* @values:
* TT_PLATFORM_APPLE_UNICODE ::
* Used by Apple to indicate a Unicode character map and/or name entry.
* See @TT_APPLE_ID_XXX for corresponding `encoding_id' values. Note
* that name entries in this format are coded as big-endian UCS-2
* character codes _only_.
*
* TT_PLATFORM_MACINTOSH ::
* Used by Apple to indicate a MacOS-specific charmap and/or name entry.
* See @TT_MAC_ID_XXX for corresponding `encoding_id' values. Note that
* most TrueType fonts contain an Apple roman charmap to be usable on
* MacOS systems (even if they contain a Microsoft charmap as well).
*
* TT_PLATFORM_ISO ::
* This value was used to specify ISO/IEC 10646 charmaps. It is however
* now deprecated. See @TT_ISO_ID_XXX for a list of corresponding
* `encoding_id' values.
*
* TT_PLATFORM_MICROSOFT ::
* Used by Microsoft to indicate Windows-specific charmaps. See
* @TT_MS_ID_XXX for a list of corresponding `encoding_id' values.
* Note that most fonts contain a Unicode charmap using
* (TT_PLATFORM_MICROSOFT, @TT_MS_ID_UNICODE_CS).
*
* TT_PLATFORM_CUSTOM ::
* Used to indicate application-specific charmaps.
*
* TT_PLATFORM_ADOBE ::
* This value isn't part of any font format specification, but is used
* by FreeType to report Adobe-specific charmaps in an @FT_CharMapRec
* structure. See @TT_ADOBE_ID_XXX.
*/
#define TT_PLATFORM_APPLE_UNICODE 0
#define TT_PLATFORM_MACINTOSH 1
/* deprecated */
#define TT_PLATFORM_ISO 2
#define TT_PLATFORM_MICROSOFT 3
#define TT_PLATFORM_CUSTOM 4
/* artificial */
#define TT_PLATFORM_ADOBE 7
/***********************************************************************
*
* @enum:
* TT_APPLE_ID_XXX
*
* @description:
* A list of valid values for the `encoding_id' for
* @TT_PLATFORM_APPLE_UNICODE charmaps and name entries.
*
* @values:
* TT_APPLE_ID_DEFAULT ::
* Unicode version 1.0.
*
* TT_APPLE_ID_UNICODE_1_1 ::
* Unicode 1.1; specifies Hangul characters starting at U+34xx.
*
* TT_APPLE_ID_ISO_10646 ::
* Deprecated (identical to preceding).
*
* TT_APPLE_ID_UNICODE_2_0 ::
* Unicode 2.0 and beyond (UTF-16 BMP only).
*
* TT_APPLE_ID_UNICODE_32 ::
* Unicode 3.1 and beyond, using UTF-32.
*
* TT_APPLE_ID_VARIANT_SELECTOR ::
* From Adobe, not Apple. Not a normal cmap. Specifies variations
* on a real cmap.
*/
/* Unicode 1.0 */
#define TT_APPLE_ID_DEFAULT 0
/* specify Hangul at U+34xx */
#define TT_APPLE_ID_UNICODE_1_1 1
/* deprecated */
#define TT_APPLE_ID_ISO_10646 2
/* or later */
#define TT_APPLE_ID_UNICODE_2_0 3
/* 2.0 or later, full repertoire */
#define TT_APPLE_ID_UNICODE_32 4
/* variation selector data */
#define TT_APPLE_ID_VARIANT_SELECTOR 5
/***********************************************************************
*
* @enum:
* TT_MAC_ID_XXX
*
* @description:
* A list of valid values for the `encoding_id' for
* @TT_PLATFORM_MACINTOSH charmaps and name entries.
*
* @values:
* TT_MAC_ID_ROMAN ::
* TT_MAC_ID_JAPANESE ::
* TT_MAC_ID_TRADITIONAL_CHINESE ::
* TT_MAC_ID_KOREAN ::
* TT_MAC_ID_ARABIC ::
* TT_MAC_ID_HEBREW ::
* TT_MAC_ID_GREEK ::
* TT_MAC_ID_RUSSIAN ::
* TT_MAC_ID_RSYMBOL ::
* TT_MAC_ID_DEVANAGARI ::
* TT_MAC_ID_GURMUKHI ::
* TT_MAC_ID_GUJARATI ::
* TT_MAC_ID_ORIYA ::
* TT_MAC_ID_BENGALI ::
* TT_MAC_ID_TAMIL ::
* TT_MAC_ID_TELUGU ::
* TT_MAC_ID_KANNADA ::
* TT_MAC_ID_MALAYALAM ::
* TT_MAC_ID_SINHALESE ::
* TT_MAC_ID_BURMESE ::
* TT_MAC_ID_KHMER ::
* TT_MAC_ID_THAI ::
* TT_MAC_ID_LAOTIAN ::
* TT_MAC_ID_GEORGIAN ::
* TT_MAC_ID_ARMENIAN ::
* TT_MAC_ID_MALDIVIAN ::
* TT_MAC_ID_SIMPLIFIED_CHINESE ::
* TT_MAC_ID_TIBETAN ::
* TT_MAC_ID_MONGOLIAN ::
* TT_MAC_ID_GEEZ ::
* TT_MAC_ID_SLAVIC ::
* TT_MAC_ID_VIETNAMESE ::
* TT_MAC_ID_SINDHI ::
* TT_MAC_ID_UNINTERP ::
*/
#define TT_MAC_ID_ROMAN 0
#define TT_MAC_ID_JAPANESE 1
#define TT_MAC_ID_TRADITIONAL_CHINESE 2
#define TT_MAC_ID_KOREAN 3
#define TT_MAC_ID_ARABIC 4
#define TT_MAC_ID_HEBREW 5
#define TT_MAC_ID_GREEK 6
#define TT_MAC_ID_RUSSIAN 7
#define TT_MAC_ID_RSYMBOL 8
#define TT_MAC_ID_DEVANAGARI 9
#define TT_MAC_ID_GURMUKHI 10
#define TT_MAC_ID_GUJARATI 11
#define TT_MAC_ID_ORIYA 12
#define TT_MAC_ID_BENGALI 13
#define TT_MAC_ID_TAMIL 14
#define TT_MAC_ID_TELUGU 15
#define TT_MAC_ID_KANNADA 16
#define TT_MAC_ID_MALAYALAM 17
#define TT_MAC_ID_SINHALESE 18
#define TT_MAC_ID_BURMESE 19
#define TT_MAC_ID_KHMER 20
#define TT_MAC_ID_THAI 21
#define TT_MAC_ID_LAOTIAN 22
#define TT_MAC_ID_GEORGIAN 23
#define TT_MAC_ID_ARMENIAN 24
#define TT_MAC_ID_MALDIVIAN 25
#define TT_MAC_ID_SIMPLIFIED_CHINESE 25
#define TT_MAC_ID_TIBETAN 26
#define TT_MAC_ID_MONGOLIAN 27
#define TT_MAC_ID_GEEZ 28
#define TT_MAC_ID_SLAVIC 29
#define TT_MAC_ID_VIETNAMESE 30
#define TT_MAC_ID_SINDHI 31
#define TT_MAC_ID_UNINTERP 32
/***********************************************************************
*
* @enum:
* TT_ISO_ID_XXX
*
* @description:
* A list of valid values for the `encoding_id' for
* @TT_PLATFORM_ISO charmaps and name entries.
*
* Their use is now deprecated.
*
* @values:
* TT_ISO_ID_7BIT_ASCII ::
* ASCII.
* TT_ISO_ID_10646 ::
* ISO/10646.
* TT_ISO_ID_8859_1 ::
* Also known as Latin-1.
*/
#define TT_ISO_ID_7BIT_ASCII 0
#define TT_ISO_ID_10646 1
#define TT_ISO_ID_8859_1 2
/***********************************************************************
*
* @enum:
* TT_MS_ID_XXX
*
* @description:
* A list of valid values for the `encoding_id' for
* @TT_PLATFORM_MICROSOFT charmaps and name entries.
*
* @values:
* TT_MS_ID_SYMBOL_CS ::
* Corresponds to Microsoft symbol encoding. See
* @FT_ENCODING_MS_SYMBOL.
*
* TT_MS_ID_UNICODE_CS ::
* Corresponds to a Microsoft WGL4 charmap, matching Unicode. See
* @FT_ENCODING_UNICODE.
*
* TT_MS_ID_SJIS ::
* Corresponds to SJIS Japanese encoding. See @FT_ENCODING_SJIS.
*
* TT_MS_ID_GB2312 ::
* Corresponds to Simplified Chinese as used in Mainland China. See
* @FT_ENCODING_GB2312.
*
* TT_MS_ID_BIG_5 ::
* Corresponds to Traditional Chinese as used in Taiwan and Hong Kong.
* See @FT_ENCODING_BIG5.
*
* TT_MS_ID_WANSUNG ::
* Corresponds to Korean Wansung encoding. See @FT_ENCODING_WANSUNG.
*
* TT_MS_ID_JOHAB ::
* Corresponds to Johab encoding. See @FT_ENCODING_JOHAB.
*
* TT_MS_ID_UCS_4 ::
* Corresponds to UCS-4 or UTF-32 charmaps. This has been added to
* the OpenType specification version 1.4 (mid-2001.)
*/
#define TT_MS_ID_SYMBOL_CS 0
#define TT_MS_ID_UNICODE_CS 1
#define TT_MS_ID_SJIS 2
#define TT_MS_ID_GB2312 3
#define TT_MS_ID_BIG_5 4
#define TT_MS_ID_WANSUNG 5
#define TT_MS_ID_JOHAB 6
#define TT_MS_ID_UCS_4 10
/***********************************************************************
*
* @enum:
* TT_ADOBE_ID_XXX
*
* @description:
* A list of valid values for the `encoding_id' for
* @TT_PLATFORM_ADOBE charmaps. This is a FreeType-specific extension!
*
* @values:
* TT_ADOBE_ID_STANDARD ::
* Adobe standard encoding.
* TT_ADOBE_ID_EXPERT ::
* Adobe expert encoding.
* TT_ADOBE_ID_CUSTOM ::
* Adobe custom encoding.
* TT_ADOBE_ID_LATIN_1 ::
* Adobe Latin~1 encoding.
*/
#define TT_ADOBE_ID_STANDARD 0
#define TT_ADOBE_ID_EXPERT 1
#define TT_ADOBE_ID_CUSTOM 2
#define TT_ADOBE_ID_LATIN_1 3
/*************************************************************************/
/* */
/* Possible values of the language identifier field in the name records */
/* of the TTF `name' table if the `platform' identifier code is */
/* TT_PLATFORM_MACINTOSH. These values are also used as return values */
/* for function @FT_Get_CMap_Language_ID. */
/* */
/* The canonical source for the Apple assigned Language ID's is at */
/* */
/* https://developer.apple.com/fonts/TTRefMan/RM06/Chap6name.html */
/* */
#define TT_MAC_LANGID_ENGLISH 0
#define TT_MAC_LANGID_FRENCH 1
#define TT_MAC_LANGID_GERMAN 2
#define TT_MAC_LANGID_ITALIAN 3
#define TT_MAC_LANGID_DUTCH 4
#define TT_MAC_LANGID_SWEDISH 5
#define TT_MAC_LANGID_SPANISH 6
#define TT_MAC_LANGID_DANISH 7
#define TT_MAC_LANGID_PORTUGUESE 8
#define TT_MAC_LANGID_NORWEGIAN 9
#define TT_MAC_LANGID_HEBREW 10
#define TT_MAC_LANGID_JAPANESE 11
#define TT_MAC_LANGID_ARABIC 12
#define TT_MAC_LANGID_FINNISH 13
#define TT_MAC_LANGID_GREEK 14
#define TT_MAC_LANGID_ICELANDIC 15
#define TT_MAC_LANGID_MALTESE 16
#define TT_MAC_LANGID_TURKISH 17
#define TT_MAC_LANGID_CROATIAN 18
#define TT_MAC_LANGID_CHINESE_TRADITIONAL 19
#define TT_MAC_LANGID_URDU 20
#define TT_MAC_LANGID_HINDI 21
#define TT_MAC_LANGID_THAI 22
#define TT_MAC_LANGID_KOREAN 23
#define TT_MAC_LANGID_LITHUANIAN 24
#define TT_MAC_LANGID_POLISH 25
#define TT_MAC_LANGID_HUNGARIAN 26
#define TT_MAC_LANGID_ESTONIAN 27
#define TT_MAC_LANGID_LETTISH 28
#define TT_MAC_LANGID_SAAMISK 29
#define TT_MAC_LANGID_FAEROESE 30
#define TT_MAC_LANGID_FARSI 31
#define TT_MAC_LANGID_RUSSIAN 32
#define TT_MAC_LANGID_CHINESE_SIMPLIFIED 33
#define TT_MAC_LANGID_FLEMISH 34
#define TT_MAC_LANGID_IRISH 35
#define TT_MAC_LANGID_ALBANIAN 36
#define TT_MAC_LANGID_ROMANIAN 37
#define TT_MAC_LANGID_CZECH 38
#define TT_MAC_LANGID_SLOVAK 39
#define TT_MAC_LANGID_SLOVENIAN 40
#define TT_MAC_LANGID_YIDDISH 41
#define TT_MAC_LANGID_SERBIAN 42
#define TT_MAC_LANGID_MACEDONIAN 43
#define TT_MAC_LANGID_BULGARIAN 44
#define TT_MAC_LANGID_UKRAINIAN 45
#define TT_MAC_LANGID_BYELORUSSIAN 46
#define TT_MAC_LANGID_UZBEK 47
#define TT_MAC_LANGID_KAZAKH 48
#define TT_MAC_LANGID_AZERBAIJANI 49
#define TT_MAC_LANGID_AZERBAIJANI_CYRILLIC_SCRIPT 49
#define TT_MAC_LANGID_AZERBAIJANI_ARABIC_SCRIPT 50
#define TT_MAC_LANGID_ARMENIAN 51
#define TT_MAC_LANGID_GEORGIAN 52
#define TT_MAC_LANGID_MOLDAVIAN 53
#define TT_MAC_LANGID_KIRGHIZ 54
#define TT_MAC_LANGID_TAJIKI 55
#define TT_MAC_LANGID_TURKMEN 56
#define TT_MAC_LANGID_MONGOLIAN 57
#define TT_MAC_LANGID_MONGOLIAN_MONGOLIAN_SCRIPT 57
#define TT_MAC_LANGID_MONGOLIAN_CYRILLIC_SCRIPT 58
#define TT_MAC_LANGID_PASHTO 59
#define TT_MAC_LANGID_KURDISH 60
#define TT_MAC_LANGID_KASHMIRI 61
#define TT_MAC_LANGID_SINDHI 62
#define TT_MAC_LANGID_TIBETAN 63
#define TT_MAC_LANGID_NEPALI 64
#define TT_MAC_LANGID_SANSKRIT 65
#define TT_MAC_LANGID_MARATHI 66
#define TT_MAC_LANGID_BENGALI 67
#define TT_MAC_LANGID_ASSAMESE 68
#define TT_MAC_LANGID_GUJARATI 69
#define TT_MAC_LANGID_PUNJABI 70
#define TT_MAC_LANGID_ORIYA 71
#define TT_MAC_LANGID_MALAYALAM 72
#define TT_MAC_LANGID_KANNADA 73
#define TT_MAC_LANGID_TAMIL 74
#define TT_MAC_LANGID_TELUGU 75
#define TT_MAC_LANGID_SINHALESE 76
#define TT_MAC_LANGID_BURMESE 77
#define TT_MAC_LANGID_KHMER 78
#define TT_MAC_LANGID_LAO 79
#define TT_MAC_LANGID_VIETNAMESE 80
#define TT_MAC_LANGID_INDONESIAN 81
#define TT_MAC_LANGID_TAGALOG 82
#define TT_MAC_LANGID_MALAY_ROMAN_SCRIPT 83
#define TT_MAC_LANGID_MALAY_ARABIC_SCRIPT 84
#define TT_MAC_LANGID_AMHARIC 85
#define TT_MAC_LANGID_TIGRINYA 86
#define TT_MAC_LANGID_GALLA 87
#define TT_MAC_LANGID_SOMALI 88
#define TT_MAC_LANGID_SWAHILI 89
#define TT_MAC_LANGID_RUANDA 90
#define TT_MAC_LANGID_RUNDI 91
#define TT_MAC_LANGID_CHEWA 92
#define TT_MAC_LANGID_MALAGASY 93
#define TT_MAC_LANGID_ESPERANTO 94
#define TT_MAC_LANGID_WELSH 128
#define TT_MAC_LANGID_BASQUE 129
#define TT_MAC_LANGID_CATALAN 130
#define TT_MAC_LANGID_LATIN 131
#define TT_MAC_LANGID_QUECHUA 132
#define TT_MAC_LANGID_GUARANI 133
#define TT_MAC_LANGID_AYMARA 134
#define TT_MAC_LANGID_TATAR 135
#define TT_MAC_LANGID_UIGHUR 136
#define TT_MAC_LANGID_DZONGKHA 137
#define TT_MAC_LANGID_JAVANESE 138
#define TT_MAC_LANGID_SUNDANESE 139
/* these seem to be errors that have been dropped */
#if 0
#define TT_MAC_LANGID_SCOTTISH_GAELIC 140
#define TT_MAC_LANGID_IRISH_GAELIC 141
#endif
/* The following codes are new as of 2000-03-10 */
#define TT_MAC_LANGID_GALICIAN 140
#define TT_MAC_LANGID_AFRIKAANS 141
#define TT_MAC_LANGID_BRETON 142
#define TT_MAC_LANGID_INUKTITUT 143
#define TT_MAC_LANGID_SCOTTISH_GAELIC 144
#define TT_MAC_LANGID_MANX_GAELIC 145
#define TT_MAC_LANGID_IRISH_GAELIC 146
#define TT_MAC_LANGID_TONGAN 147
#define TT_MAC_LANGID_GREEK_POLYTONIC 148
#define TT_MAC_LANGID_GREELANDIC 149
#define TT_MAC_LANGID_AZERBAIJANI_ROMAN_SCRIPT 150
/*************************************************************************/
/* */
/* Possible values of the language identifier field in the name records */
/* of the TTF `name' table if the `platform' identifier code is */
/* TT_PLATFORM_MICROSOFT. */
/* */
/* The canonical source for the MS assigned LCIDs is */
/* */
/* http://www.microsoft.com/globaldev/reference/lcid-all.mspx */
/* */
#define TT_MS_LANGID_ARABIC_GENERAL 0x0001
#define TT_MS_LANGID_ARABIC_SAUDI_ARABIA 0x0401
#define TT_MS_LANGID_ARABIC_IRAQ 0x0801
#define TT_MS_LANGID_ARABIC_EGYPT 0x0c01
#define TT_MS_LANGID_ARABIC_LIBYA 0x1001
#define TT_MS_LANGID_ARABIC_ALGERIA 0x1401
#define TT_MS_LANGID_ARABIC_MOROCCO 0x1801
#define TT_MS_LANGID_ARABIC_TUNISIA 0x1c01
#define TT_MS_LANGID_ARABIC_OMAN 0x2001
#define TT_MS_LANGID_ARABIC_YEMEN 0x2401
#define TT_MS_LANGID_ARABIC_SYRIA 0x2801
#define TT_MS_LANGID_ARABIC_JORDAN 0x2c01
#define TT_MS_LANGID_ARABIC_LEBANON 0x3001
#define TT_MS_LANGID_ARABIC_KUWAIT 0x3401
#define TT_MS_LANGID_ARABIC_UAE 0x3801
#define TT_MS_LANGID_ARABIC_BAHRAIN 0x3c01
#define TT_MS_LANGID_ARABIC_QATAR 0x4001
#define TT_MS_LANGID_BULGARIAN_BULGARIA 0x0402
#define TT_MS_LANGID_CATALAN_SPAIN 0x0403
#define TT_MS_LANGID_CHINESE_GENERAL 0x0004
#define TT_MS_LANGID_CHINESE_TAIWAN 0x0404
#define TT_MS_LANGID_CHINESE_PRC 0x0804
#define TT_MS_LANGID_CHINESE_HONG_KONG 0x0c04
#define TT_MS_LANGID_CHINESE_SINGAPORE 0x1004
/* this looks like the correct value */
#if 1
#define TT_MS_LANGID_CHINESE_MACAU 0x1404
/* but beware, Microsoft may change its mind...
the most recent Word reference has the following: */
#else
#define TT_MS_LANGID_CHINESE_MACAU TT_MS_LANGID_CHINESE_HONG_KONG
#endif
/* used only with .NET `cultures'; commented out */
#if 0
#define TT_MS_LANGID_CHINESE_TRADITIONAL 0x7C04
#endif
#define TT_MS_LANGID_CZECH_CZECH_REPUBLIC 0x0405
#define TT_MS_LANGID_DANISH_DENMARK 0x0406
#define TT_MS_LANGID_GERMAN_GERMANY 0x0407
#define TT_MS_LANGID_GERMAN_SWITZERLAND 0x0807
#define TT_MS_LANGID_GERMAN_AUSTRIA 0x0c07
#define TT_MS_LANGID_GERMAN_LUXEMBOURG 0x1007
#define TT_MS_LANGID_GERMAN_LIECHTENSTEI 0x1407
#define TT_MS_LANGID_GREEK_GREECE 0x0408
/* don't ask what this one means... It is commented out currently. */
#if 0
#define TT_MS_LANGID_GREEK_GREECE2 0x2008
#endif
#define TT_MS_LANGID_ENGLISH_GENERAL 0x0009
#define TT_MS_LANGID_ENGLISH_UNITED_STATES 0x0409
#define TT_MS_LANGID_ENGLISH_UNITED_KINGDOM 0x0809
#define TT_MS_LANGID_ENGLISH_AUSTRALIA 0x0c09
#define TT_MS_LANGID_ENGLISH_CANADA 0x1009
#define TT_MS_LANGID_ENGLISH_NEW_ZEALAND 0x1409
#define TT_MS_LANGID_ENGLISH_IRELAND 0x1809
#define TT_MS_LANGID_ENGLISH_SOUTH_AFRICA 0x1c09
#define TT_MS_LANGID_ENGLISH_JAMAICA 0x2009
#define TT_MS_LANGID_ENGLISH_CARIBBEAN 0x2409
#define TT_MS_LANGID_ENGLISH_BELIZE 0x2809
#define TT_MS_LANGID_ENGLISH_TRINIDAD 0x2c09
#define TT_MS_LANGID_ENGLISH_ZIMBABWE 0x3009
#define TT_MS_LANGID_ENGLISH_PHILIPPINES 0x3409
#define TT_MS_LANGID_ENGLISH_INDONESIA 0x3809
#define TT_MS_LANGID_ENGLISH_HONG_KONG 0x3c09
#define TT_MS_LANGID_ENGLISH_INDIA 0x4009
#define TT_MS_LANGID_ENGLISH_MALAYSIA 0x4409
#define TT_MS_LANGID_ENGLISH_SINGAPORE 0x4809
#define TT_MS_LANGID_SPANISH_SPAIN_TRADITIONAL_SORT 0x040a
#define TT_MS_LANGID_SPANISH_MEXICO 0x080a
#define TT_MS_LANGID_SPANISH_SPAIN_INTERNATIONAL_SORT 0x0c0a
#define TT_MS_LANGID_SPANISH_GUATEMALA 0x100a
#define TT_MS_LANGID_SPANISH_COSTA_RICA 0x140a
#define TT_MS_LANGID_SPANISH_PANAMA 0x180a
#define TT_MS_LANGID_SPANISH_DOMINICAN_REPUBLIC 0x1c0a
#define TT_MS_LANGID_SPANISH_VENEZUELA 0x200a
#define TT_MS_LANGID_SPANISH_COLOMBIA 0x240a
#define TT_MS_LANGID_SPANISH_PERU 0x280a
#define TT_MS_LANGID_SPANISH_ARGENTINA 0x2c0a
#define TT_MS_LANGID_SPANISH_ECUADOR 0x300a
#define TT_MS_LANGID_SPANISH_CHILE 0x340a
#define TT_MS_LANGID_SPANISH_URUGUAY 0x380a
#define TT_MS_LANGID_SPANISH_PARAGUAY 0x3c0a
#define TT_MS_LANGID_SPANISH_BOLIVIA 0x400a
#define TT_MS_LANGID_SPANISH_EL_SALVADOR 0x440a
#define TT_MS_LANGID_SPANISH_HONDURAS 0x480a
#define TT_MS_LANGID_SPANISH_NICARAGUA 0x4c0a
#define TT_MS_LANGID_SPANISH_PUERTO_RICO 0x500a
#define TT_MS_LANGID_SPANISH_UNITED_STATES 0x540a
/* The following ID blatantly violate MS specs by using a */
/* sublanguage > 0x1F. */
#define TT_MS_LANGID_SPANISH_LATIN_AMERICA 0xE40aU
#define TT_MS_LANGID_FINNISH_FINLAND 0x040b
#define TT_MS_LANGID_FRENCH_FRANCE 0x040c
#define TT_MS_LANGID_FRENCH_BELGIUM 0x080c
#define TT_MS_LANGID_FRENCH_CANADA 0x0c0c
#define TT_MS_LANGID_FRENCH_SWITZERLAND 0x100c
#define TT_MS_LANGID_FRENCH_LUXEMBOURG 0x140c
#define TT_MS_LANGID_FRENCH_MONACO 0x180c
#define TT_MS_LANGID_FRENCH_WEST_INDIES 0x1c0c
#define TT_MS_LANGID_FRENCH_REUNION 0x200c
#define TT_MS_LANGID_FRENCH_CONGO 0x240c
/* which was formerly: */
#define TT_MS_LANGID_FRENCH_ZAIRE TT_MS_LANGID_FRENCH_CONGO
#define TT_MS_LANGID_FRENCH_SENEGAL 0x280c
#define TT_MS_LANGID_FRENCH_CAMEROON 0x2c0c
#define TT_MS_LANGID_FRENCH_COTE_D_IVOIRE 0x300c
#define TT_MS_LANGID_FRENCH_MALI 0x340c
#define TT_MS_LANGID_FRENCH_MOROCCO 0x380c
#define TT_MS_LANGID_FRENCH_HAITI 0x3c0c
/* and another violation of the spec (see 0xE40aU) */
#define TT_MS_LANGID_FRENCH_NORTH_AFRICA 0xE40cU
#define TT_MS_LANGID_HEBREW_ISRAEL 0x040d
#define TT_MS_LANGID_HUNGARIAN_HUNGARY 0x040e
#define TT_MS_LANGID_ICELANDIC_ICELAND 0x040f
#define TT_MS_LANGID_ITALIAN_ITALY 0x0410
#define TT_MS_LANGID_ITALIAN_SWITZERLAND 0x0810
#define TT_MS_LANGID_JAPANESE_JAPAN 0x0411
#define TT_MS_LANGID_KOREAN_EXTENDED_WANSUNG_KOREA 0x0412
#define TT_MS_LANGID_KOREAN_JOHAB_KOREA 0x0812
#define TT_MS_LANGID_DUTCH_NETHERLANDS 0x0413
#define TT_MS_LANGID_DUTCH_BELGIUM 0x0813
#define TT_MS_LANGID_NORWEGIAN_NORWAY_BOKMAL 0x0414
#define TT_MS_LANGID_NORWEGIAN_NORWAY_NYNORSK 0x0814
#define TT_MS_LANGID_POLISH_POLAND 0x0415
#define TT_MS_LANGID_PORTUGUESE_BRAZIL 0x0416
#define TT_MS_LANGID_PORTUGUESE_PORTUGAL 0x0816
#define TT_MS_LANGID_RHAETO_ROMANIC_SWITZERLAND 0x0417
#define TT_MS_LANGID_ROMANIAN_ROMANIA 0x0418
#define TT_MS_LANGID_MOLDAVIAN_MOLDAVIA 0x0818
#define TT_MS_LANGID_RUSSIAN_RUSSIA 0x0419
#define TT_MS_LANGID_RUSSIAN_MOLDAVIA 0x0819
#define TT_MS_LANGID_CROATIAN_CROATIA 0x041a
#define TT_MS_LANGID_SERBIAN_SERBIA_LATIN 0x081a
#define TT_MS_LANGID_SERBIAN_SERBIA_CYRILLIC 0x0c1a
/* this used to be this value, but it looks like we were wrong */
#if 0
#define TT_MS_LANGID_BOSNIAN_BOSNIA_HERZEGOVINA 0x101a
/* current sources say */
#else
#define TT_MS_LANGID_CROATIAN_BOSNIA_HERZEGOVINA 0x101a
#define TT_MS_LANGID_BOSNIAN_BOSNIA_HERZEGOVINA 0x141a
/* and XPsp2 Platform SDK added (2004-07-26) */
/* Names are shortened to be significant within 40 chars. */
#define TT_MS_LANGID_SERBIAN_BOSNIA_HERZ_LATIN 0x181a
#define TT_MS_LANGID_SERBIAN_BOSNIA_HERZ_CYRILLIC 0x181a
#endif
#define TT_MS_LANGID_SLOVAK_SLOVAKIA 0x041b
#define TT_MS_LANGID_ALBANIAN_ALBANIA 0x041c
#define TT_MS_LANGID_SWEDISH_SWEDEN 0x041d
#define TT_MS_LANGID_SWEDISH_FINLAND 0x081d
#define TT_MS_LANGID_THAI_THAILAND 0x041e
#define TT_MS_LANGID_TURKISH_TURKEY 0x041f
#define TT_MS_LANGID_URDU_PAKISTAN 0x0420
#define TT_MS_LANGID_URDU_INDIA 0x0820
#define TT_MS_LANGID_INDONESIAN_INDONESIA 0x0421
#define TT_MS_LANGID_UKRAINIAN_UKRAINE 0x0422
#define TT_MS_LANGID_BELARUSIAN_BELARUS 0x0423
#define TT_MS_LANGID_SLOVENE_SLOVENIA 0x0424
#define TT_MS_LANGID_ESTONIAN_ESTONIA 0x0425
#define TT_MS_LANGID_LATVIAN_LATVIA 0x0426
#define TT_MS_LANGID_LITHUANIAN_LITHUANIA 0x0427
#define TT_MS_LANGID_CLASSIC_LITHUANIAN_LITHUANIA 0x0827
#define TT_MS_LANGID_TAJIK_TAJIKISTAN 0x0428
#define TT_MS_LANGID_FARSI_IRAN 0x0429
#define TT_MS_LANGID_VIETNAMESE_VIET_NAM 0x042a
#define TT_MS_LANGID_ARMENIAN_ARMENIA 0x042b
#define TT_MS_LANGID_AZERI_AZERBAIJAN_LATIN 0x042c
#define TT_MS_LANGID_AZERI_AZERBAIJAN_CYRILLIC 0x082c
#define TT_MS_LANGID_BASQUE_SPAIN 0x042d
#define TT_MS_LANGID_SORBIAN_GERMANY 0x042e
#define TT_MS_LANGID_MACEDONIAN_MACEDONIA 0x042f
#define TT_MS_LANGID_SUTU_SOUTH_AFRICA 0x0430
#define TT_MS_LANGID_TSONGA_SOUTH_AFRICA 0x0431
#define TT_MS_LANGID_TSWANA_SOUTH_AFRICA 0x0432
#define TT_MS_LANGID_VENDA_SOUTH_AFRICA 0x0433
#define TT_MS_LANGID_XHOSA_SOUTH_AFRICA 0x0434
#define TT_MS_LANGID_ZULU_SOUTH_AFRICA 0x0435
#define TT_MS_LANGID_AFRIKAANS_SOUTH_AFRICA 0x0436
#define TT_MS_LANGID_GEORGIAN_GEORGIA 0x0437
#define TT_MS_LANGID_FAEROESE_FAEROE_ISLANDS 0x0438
#define TT_MS_LANGID_HINDI_INDIA 0x0439
#define TT_MS_LANGID_MALTESE_MALTA 0x043a
/* Added by XPsp2 Platform SDK (2004-07-26) */
#define TT_MS_LANGID_SAMI_NORTHERN_NORWAY 0x043b
#define TT_MS_LANGID_SAMI_NORTHERN_SWEDEN 0x083b
#define TT_MS_LANGID_SAMI_NORTHERN_FINLAND 0x0C3b
#define TT_MS_LANGID_SAMI_LULE_NORWAY 0x103b
#define TT_MS_LANGID_SAMI_LULE_SWEDEN 0x143b
#define TT_MS_LANGID_SAMI_SOUTHERN_NORWAY 0x183b
#define TT_MS_LANGID_SAMI_SOUTHERN_SWEDEN 0x1C3b
#define TT_MS_LANGID_SAMI_SKOLT_FINLAND 0x203b
#define TT_MS_LANGID_SAMI_INARI_FINLAND 0x243b
/* ... and we also keep our old identifier... */
#define TT_MS_LANGID_SAAMI_LAPONIA 0x043b
/* this seems to be a previous inversion */
#if 0
#define TT_MS_LANGID_IRISH_GAELIC_IRELAND 0x043c
#define TT_MS_LANGID_SCOTTISH_GAELIC_UNITED_KINGDOM 0x083c
#else
#define TT_MS_LANGID_SCOTTISH_GAELIC_UNITED_KINGDOM 0x083c
#define TT_MS_LANGID_IRISH_GAELIC_IRELAND 0x043c
#endif
#define TT_MS_LANGID_YIDDISH_GERMANY 0x043d
#define TT_MS_LANGID_MALAY_MALAYSIA 0x043e
#define TT_MS_LANGID_MALAY_BRUNEI_DARUSSALAM 0x083e
#define TT_MS_LANGID_KAZAK_KAZAKSTAN 0x043f
/* Cyrillic*/#define TT_MS_LANGID_KIRGHIZ_KIRGHIZSTAN 0x0440
/* alias declared in Windows 2000 */
#define TT_MS_LANGID_KIRGHIZ_KIRGHIZ_REPUBLIC \
TT_MS_LANGID_KIRGHIZ_KIRGHIZSTAN
#define TT_MS_LANGID_SWAHILI_KENYA 0x0441
#define TT_MS_LANGID_TURKMEN_TURKMENISTAN 0x0442
#define TT_MS_LANGID_UZBEK_UZBEKISTAN_LATIN 0x0443
#define TT_MS_LANGID_UZBEK_UZBEKISTAN_CYRILLIC 0x0843
#define TT_MS_LANGID_TATAR_TATARSTAN 0x0444
#define TT_MS_LANGID_BENGALI_INDIA 0x0445
#define TT_MS_LANGID_BENGALI_BANGLADESH 0x0845
#define TT_MS_LANGID_PUNJABI_INDIA 0x0446
#define TT_MS_LANGID_PUNJABI_ARABIC_PAKISTAN 0x0846
#define TT_MS_LANGID_GUJARATI_INDIA 0x0447
#define TT_MS_LANGID_ORIYA_INDIA 0x0448
#define TT_MS_LANGID_TAMIL_INDIA 0x0449
#define TT_MS_LANGID_TELUGU_INDIA 0x044a
#define TT_MS_LANGID_KANNADA_INDIA 0x044b
#define TT_MS_LANGID_MALAYALAM_INDIA 0x044c
#define TT_MS_LANGID_ASSAMESE_INDIA 0x044d
#define TT_MS_LANGID_MARATHI_INDIA 0x044e
#define TT_MS_LANGID_SANSKRIT_INDIA 0x044f
/* Cyrillic */#define TT_MS_LANGID_MONGOLIAN_MONGOLIA 0x0450
#define TT_MS_LANGID_MONGOLIAN_MONGOLIA_MONGOLIAN 0x0850
#define TT_MS_LANGID_TIBETAN_CHINA 0x0451
/* Don't use the next constant! It has */
/* (1) the wrong spelling (Dzonghka) */
/* (2) Microsoft doesn't officially define it -- */
/* at least it is not in the List of Local */
/* ID Values. */
/* (3) Dzongkha is not the same language as */
/* Tibetan, so merging it is wrong anyway. */
/* */
/* TT_MS_LANGID_TIBETAN_BHUTAN is correct, BTW. */
#define TT_MS_LANGID_DZONGHKA_BHUTAN 0x0851
#if 0
/* the following used to be defined */
#define TT_MS_LANGID_TIBETAN_BHUTAN 0x0451
/* ... but it was changed; */
#else
/* So we will continue to #define it, but with the correct value */
#define TT_MS_LANGID_TIBETAN_BHUTAN TT_MS_LANGID_DZONGHKA_BHUTAN
#endif
#define TT_MS_LANGID_WELSH_WALES 0x0452
#define TT_MS_LANGID_KHMER_CAMBODIA 0x0453
#define TT_MS_LANGID_LAO_LAOS 0x0454
#define TT_MS_LANGID_BURMESE_MYANMAR 0x0455
#define TT_MS_LANGID_GALICIAN_SPAIN 0x0456
#define TT_MS_LANGID_KONKANI_INDIA 0x0457
/* Bengali */#define TT_MS_LANGID_MANIPURI_INDIA 0x0458
/* Arabic */#define TT_MS_LANGID_SINDHI_INDIA 0x0459
#define TT_MS_LANGID_SINDHI_PAKISTAN 0x0859
/* Missing a LCID for Sindhi in Devanagari script */
#define TT_MS_LANGID_SYRIAC_SYRIA 0x045a
#define TT_MS_LANGID_SINHALESE_SRI_LANKA 0x045b
#define TT_MS_LANGID_CHEROKEE_UNITED_STATES 0x045c
#define TT_MS_LANGID_INUKTITUT_CANADA 0x045d
#define TT_MS_LANGID_AMHARIC_ETHIOPIA 0x045e
/* Arabic */#define TT_MS_LANGID_TAMAZIGHT_MOROCCO 0x045f
#define TT_MS_LANGID_TAMAZIGHT_MOROCCO_LATIN 0x085f
/* Missing a LCID for Tifinagh script */
/* Arabic */#define TT_MS_LANGID_KASHMIRI_PAKISTAN 0x0460
/* Spelled this way by XPsp2 Platform SDK (2004-07-26) */
/* script is yet unclear... might be Arabic, Nagari or Sharada */
#define TT_MS_LANGID_KASHMIRI_SASIA 0x0860
/* ... and aliased (by MS) for compatibility reasons. */
#define TT_MS_LANGID_KASHMIRI_INDIA TT_MS_LANGID_KASHMIRI_SASIA
#define TT_MS_LANGID_NEPALI_NEPAL 0x0461
#define TT_MS_LANGID_NEPALI_INDIA 0x0861
#define TT_MS_LANGID_FRISIAN_NETHERLANDS 0x0462
#define TT_MS_LANGID_PASHTO_AFGHANISTAN 0x0463
#define TT_MS_LANGID_FILIPINO_PHILIPPINES 0x0464
#define TT_MS_LANGID_DHIVEHI_MALDIVES 0x0465
/* alias declared in Windows 2000 */
#define TT_MS_LANGID_DIVEHI_MALDIVES TT_MS_LANGID_DHIVEHI_MALDIVES
#define TT_MS_LANGID_EDO_NIGERIA 0x0466
#define TT_MS_LANGID_FULFULDE_NIGERIA 0x0467
#define TT_MS_LANGID_HAUSA_NIGERIA 0x0468
#define TT_MS_LANGID_IBIBIO_NIGERIA 0x0469
#define TT_MS_LANGID_YORUBA_NIGERIA 0x046a
#define TT_MS_LANGID_QUECHUA_BOLIVIA 0x046b
#define TT_MS_LANGID_QUECHUA_ECUADOR 0x086b
#define TT_MS_LANGID_QUECHUA_PERU 0x0c6b
#define TT_MS_LANGID_SEPEDI_SOUTH_AFRICA 0x046c
/* Also spelled by XPsp2 Platform SDK (2004-07-26) */
#define TT_MS_LANGID_SOTHO_SOUTHERN_SOUTH_AFRICA \
TT_MS_LANGID_SEPEDI_SOUTH_AFRICA
/* language codes 0x046d, 0x046e and 0x046f are (still) unknown. */
#define TT_MS_LANGID_IGBO_NIGERIA 0x0470
#define TT_MS_LANGID_KANURI_NIGERIA 0x0471
#define TT_MS_LANGID_OROMO_ETHIOPIA 0x0472
#define TT_MS_LANGID_TIGRIGNA_ETHIOPIA 0x0473
#define TT_MS_LANGID_TIGRIGNA_ERYTHREA 0x0873
/* also spelled in the `Passport SDK' list as: */
#define TT_MS_LANGID_TIGRIGNA_ERYTREA TT_MS_LANGID_TIGRIGNA_ERYTHREA
#define TT_MS_LANGID_GUARANI_PARAGUAY 0x0474
#define TT_MS_LANGID_HAWAIIAN_UNITED_STATES 0x0475
#define TT_MS_LANGID_LATIN 0x0476
#define TT_MS_LANGID_SOMALI_SOMALIA 0x0477
/* Note: Yi does not have a (proper) ISO 639-2 code, since it is mostly */
/* not written (but OTOH the peculiar writing system is worth */
/* studying). */
#define TT_MS_LANGID_YI_CHINA 0x0478
#define TT_MS_LANGID_PAPIAMENTU_NETHERLANDS_ANTILLES 0x0479
/* language codes from 0x047a to 0x047f are (still) unknown. */
#define TT_MS_LANGID_UIGHUR_CHINA 0x0480
#define TT_MS_LANGID_MAORI_NEW_ZEALAND 0x0481
/* not deemed useful for fonts */
#if 0
#define TT_MS_LANGID_HUMAN_INTERFACE_DEVICE 0x04ff
#endif
/*************************************************************************/
/* */
/* Possible values of the `name' identifier field in the name records of */
/* the TTF `name' table. These values are platform independent. */
/* */
#define TT_NAME_ID_COPYRIGHT 0
#define TT_NAME_ID_FONT_FAMILY 1
#define TT_NAME_ID_FONT_SUBFAMILY 2
#define TT_NAME_ID_UNIQUE_ID 3
#define TT_NAME_ID_FULL_NAME 4
#define TT_NAME_ID_VERSION_STRING 5
#define TT_NAME_ID_PS_NAME 6
#define TT_NAME_ID_TRADEMARK 7
/* the following values are from the OpenType spec */
#define TT_NAME_ID_MANUFACTURER 8
#define TT_NAME_ID_DESIGNER 9
#define TT_NAME_ID_DESCRIPTION 10
#define TT_NAME_ID_VENDOR_URL 11
#define TT_NAME_ID_DESIGNER_URL 12
#define TT_NAME_ID_LICENSE 13
#define TT_NAME_ID_LICENSE_URL 14
/* number 15 is reserved */
#define TT_NAME_ID_PREFERRED_FAMILY 16
#define TT_NAME_ID_PREFERRED_SUBFAMILY 17
#define TT_NAME_ID_MAC_FULL_NAME 18
/* The following code is new as of 2000-01-21 */
#define TT_NAME_ID_SAMPLE_TEXT 19
/* This is new in OpenType 1.3 */
#define TT_NAME_ID_CID_FINDFONT_NAME 20
/* This is new in OpenType 1.5 */
#define TT_NAME_ID_WWS_FAMILY 21
#define TT_NAME_ID_WWS_SUBFAMILY 22
/*************************************************************************/
/* */
/* Bit mask values for the Unicode Ranges from the TTF `OS2 ' table. */
/* */
/* Updated 08-Nov-2008. */
/* */
/* Bit 0 Basic Latin */
/* U+0020-U+007E */
#define TT_UCR_BASIC_LATIN (1L << 0)
/* Bit 1 C1 Controls and Latin-1 Supplement */
/* U+0080-U+00FF */
#define TT_UCR_LATIN1_SUPPLEMENT (1L << 1)
/* Bit 2 Latin Extended-A */
/* U+0100-U+017F */
#define TT_UCR_LATIN_EXTENDED_A (1L << 2)
/* Bit 3 Latin Extended-B */
/* U+0180-U+024F */
#define TT_UCR_LATIN_EXTENDED_B (1L << 3)
/* Bit 4 IPA Extensions */
/* Phonetic Extensions */
/* Phonetic Extensions Supplement */
/* U+0250-U+02AF */
#define TT_UCR_IPA_EXTENSIONS (1L << 4)
/* U+1D00-U+1D7F */
/* U+1D80-U+1DBF */
/* Bit 5 Spacing Modifier Letters */
/* Modifier Tone Letters */
/* U+02B0-U+02FF */
#define TT_UCR_SPACING_MODIFIER (1L << 5)
/* U+A700-U+A71F */
/* Bit 6 Combining Diacritical Marks */
/* Combining Diacritical Marks Supplement */
/* U+0300-U+036F */
#define TT_UCR_COMBINING_DIACRITICS (1L << 6)
/* U+1DC0-U+1DFF */
/* Bit 7 Greek and Coptic */
/* U+0370-U+03FF */
#define TT_UCR_GREEK (1L << 7)
/* Bit 8 Coptic */
/* U+2C80-U+2CFF */
#define TT_UCR_COPTIC (1L << 8)
/* Bit 9 Cyrillic */
/* Cyrillic Supplement */
/* Cyrillic Extended-A */
/* Cyrillic Extended-B */
/* U+0400-U+04FF */
#define TT_UCR_CYRILLIC (1L << 9)
/* U+0500-U+052F */
/* U+2DE0-U+2DFF */
/* U+A640-U+A69F */
/* Bit 10 Armenian */
/* U+0530-U+058F */
#define TT_UCR_ARMENIAN (1L << 10)
/* Bit 11 Hebrew */
/* U+0590-U+05FF */
#define TT_UCR_HEBREW (1L << 11)
/* Bit 12 Vai */
/* U+A500-U+A63F */
#define TT_UCR_VAI (1L << 12)
/* Bit 13 Arabic */
/* Arabic Supplement */
/* U+0600-U+06FF */
#define TT_UCR_ARABIC (1L << 13)
/* U+0750-U+077F */
/* Bit 14 NKo */
/* U+07C0-U+07FF */
#define TT_UCR_NKO (1L << 14)
/* Bit 15 Devanagari */
/* U+0900-U+097F */
#define TT_UCR_DEVANAGARI (1L << 15)
/* Bit 16 Bengali */
/* U+0980-U+09FF */
#define TT_UCR_BENGALI (1L << 16)
/* Bit 17 Gurmukhi */
/* U+0A00-U+0A7F */
#define TT_UCR_GURMUKHI (1L << 17)
/* Bit 18 Gujarati */
/* U+0A80-U+0AFF */
#define TT_UCR_GUJARATI (1L << 18)
/* Bit 19 Oriya */
/* U+0B00-U+0B7F */
#define TT_UCR_ORIYA (1L << 19)
/* Bit 20 Tamil */
/* U+0B80-U+0BFF */
#define TT_UCR_TAMIL (1L << 20)
/* Bit 21 Telugu */
/* U+0C00-U+0C7F */
#define TT_UCR_TELUGU (1L << 21)
/* Bit 22 Kannada */
/* U+0C80-U+0CFF */
#define TT_UCR_KANNADA (1L << 22)
/* Bit 23 Malayalam */
/* U+0D00-U+0D7F */
#define TT_UCR_MALAYALAM (1L << 23)
/* Bit 24 Thai */
/* U+0E00-U+0E7F */
#define TT_UCR_THAI (1L << 24)
/* Bit 25 Lao */
/* U+0E80-U+0EFF */
#define TT_UCR_LAO (1L << 25)
/* Bit 26 Georgian */
/* Georgian Supplement */
/* U+10A0-U+10FF */
#define TT_UCR_GEORGIAN (1L << 26)
/* U+2D00-U+2D2F */
/* Bit 27 Balinese */
/* U+1B00-U+1B7F */
#define TT_UCR_BALINESE (1L << 27)
/* Bit 28 Hangul Jamo */
/* U+1100-U+11FF */
#define TT_UCR_HANGUL_JAMO (1L << 28)
/* Bit 29 Latin Extended Additional */
/* Latin Extended-C */
/* Latin Extended-D */
/* U+1E00-U+1EFF */
#define TT_UCR_LATIN_EXTENDED_ADDITIONAL (1L << 29)
/* U+2C60-U+2C7F */
/* U+A720-U+A7FF */
/* Bit 30 Greek Extended */
/* U+1F00-U+1FFF */
#define TT_UCR_GREEK_EXTENDED (1L << 30)
/* Bit 31 General Punctuation */
/* Supplemental Punctuation */
/* U+2000-U+206F */
#define TT_UCR_GENERAL_PUNCTUATION (1L << 31)
/* U+2E00-U+2E7F */
/* Bit 32 Superscripts And Subscripts */
/* U+2070-U+209F */
#define TT_UCR_SUPERSCRIPTS_SUBSCRIPTS (1L << 0)
/* Bit 33 Currency Symbols */
/* U+20A0-U+20CF */
#define TT_UCR_CURRENCY_SYMBOLS (1L << 1)
/* Bit 34 Combining Diacritical Marks For Symbols */
/* U+20D0-U+20FF */
#define TT_UCR_COMBINING_DIACRITICS_SYMB (1L << 2)
/* Bit 35 Letterlike Symbols */
/* U+2100-U+214F */
#define TT_UCR_LETTERLIKE_SYMBOLS (1L << 3)
/* Bit 36 Number Forms */
/* U+2150-U+218F */
#define TT_UCR_NUMBER_FORMS (1L << 4)
/* Bit 37 Arrows */
/* Supplemental Arrows-A */
/* Supplemental Arrows-B */
/* Miscellaneous Symbols and Arrows */
/* U+2190-U+21FF */
#define TT_UCR_ARROWS (1L << 5)
/* U+27F0-U+27FF */
/* U+2900-U+297F */
/* U+2B00-U+2BFF */
/* Bit 38 Mathematical Operators */
/* Supplemental Mathematical Operators */
/* Miscellaneous Mathematical Symbols-A */
/* Miscellaneous Mathematical Symbols-B */
/* U+2200-U+22FF */
#define TT_UCR_MATHEMATICAL_OPERATORS (1L << 6)
/* U+2A00-U+2AFF */
/* U+27C0-U+27EF */
/* U+2980-U+29FF */
/* Bit 39 Miscellaneous Technical */
/* U+2300-U+23FF */
#define TT_UCR_MISCELLANEOUS_TECHNICAL (1L << 7)
/* Bit 40 Control Pictures */
/* U+2400-U+243F */
#define TT_UCR_CONTROL_PICTURES (1L << 8)
/* Bit 41 Optical Character Recognition */
/* U+2440-U+245F */
#define TT_UCR_OCR (1L << 9)
/* Bit 42 Enclosed Alphanumerics */
/* U+2460-U+24FF */
#define TT_UCR_ENCLOSED_ALPHANUMERICS (1L << 10)
/* Bit 43 Box Drawing */
/* U+2500-U+257F */
#define TT_UCR_BOX_DRAWING (1L << 11)
/* Bit 44 Block Elements */
/* U+2580-U+259F */
#define TT_UCR_BLOCK_ELEMENTS (1L << 12)
/* Bit 45 Geometric Shapes */
/* U+25A0-U+25FF */
#define TT_UCR_GEOMETRIC_SHAPES (1L << 13)
/* Bit 46 Miscellaneous Symbols */
/* U+2600-U+26FF */
#define TT_UCR_MISCELLANEOUS_SYMBOLS (1L << 14)
/* Bit 47 Dingbats */
/* U+2700-U+27BF */
#define TT_UCR_DINGBATS (1L << 15)
/* Bit 48 CJK Symbols and Punctuation */
/* U+3000-U+303F */
#define TT_UCR_CJK_SYMBOLS (1L << 16)
/* Bit 49 Hiragana */
/* U+3040-U+309F */
#define TT_UCR_HIRAGANA (1L << 17)
/* Bit 50 Katakana */
/* Katakana Phonetic Extensions */
/* U+30A0-U+30FF */
#define TT_UCR_KATAKANA (1L << 18)
/* U+31F0-U+31FF */
/* Bit 51 Bopomofo */
/* Bopomofo Extended */
/* U+3100-U+312F */
#define TT_UCR_BOPOMOFO (1L << 19)
/* U+31A0-U+31BF */
/* Bit 52 Hangul Compatibility Jamo */
/* U+3130-U+318F */
#define TT_UCR_HANGUL_COMPATIBILITY_JAMO (1L << 20)
/* Bit 53 Phags-Pa */
/* U+A840-U+A87F */
#define TT_UCR_CJK_MISC (1L << 21)
/* deprecated */
#define TT_UCR_KANBUN TT_UCR_CJK_MISC
#define TT_UCR_PHAGSPA
/* Bit 54 Enclosed CJK Letters and Months */
/* U+3200-U+32FF */
#define TT_UCR_ENCLOSED_CJK_LETTERS_MONTHS (1L << 22)
/* Bit 55 CJK Compatibility */
/* U+3300-U+33FF */
#define TT_UCR_CJK_COMPATIBILITY (1L << 23)
/* Bit 56 Hangul Syllables */
/* U+AC00-U+D7A3 */
#define TT_UCR_HANGUL (1L << 24)
/* Bit 57 High Surrogates */
/* High Private Use Surrogates */
/* Low Surrogates */
/* */
/* According to OpenType specs v.1.3+, */
/* setting bit 57 implies that there is */
/* at least one codepoint beyond the */
/* Basic Multilingual Plane that is */
/* supported by this font. So it really */
/* means >= U+10000 */
/* U+D800-U+DB7F */
#define TT_UCR_SURROGATES (1L << 25)
/* U+DB80-U+DBFF */
/* U+DC00-U+DFFF */
#define TT_UCR_NON_PLANE_0 TT_UCR_SURROGATES
/* Bit 58 Phoenician */
/*U+10900-U+1091F*/
#define TT_UCR_PHOENICIAN (1L << 26)
/* Bit 59 CJK Unified Ideographs */
/* CJK Radicals Supplement */
/* Kangxi Radicals */
/* Ideographic Description Characters */
/* CJK Unified Ideographs Extension A */
/* CJK Unified Ideographs Extension B */
/* Kanbun */
/* U+4E00-U+9FFF */
#define TT_UCR_CJK_UNIFIED_IDEOGRAPHS (1L << 27)
/* U+2E80-U+2EFF */
/* U+2F00-U+2FDF */
/* U+2FF0-U+2FFF */
/* U+3400-U+4DB5 */
/*U+20000-U+2A6DF*/
/* U+3190-U+319F */
/* Bit 60 Private Use */
/* U+E000-U+F8FF */
#define TT_UCR_PRIVATE_USE (1L << 28)
/* Bit 61 CJK Strokes */
/* CJK Compatibility Ideographs */
/* CJK Compatibility Ideographs Supplement */
/* U+31C0-U+31EF */
#define TT_UCR_CJK_COMPATIBILITY_IDEOGRAPHS (1L << 29)
/* U+F900-U+FAFF */
/*U+2F800-U+2FA1F*/
/* Bit 62 Alphabetic Presentation Forms */
/* U+FB00-U+FB4F */
#define TT_UCR_ALPHABETIC_PRESENTATION_FORMS (1L << 30)
/* Bit 63 Arabic Presentation Forms-A */
/* U+FB50-U+FDFF */
#define TT_UCR_ARABIC_PRESENTATIONS_A (1L << 31)
/* Bit 64 Combining Half Marks */
/* U+FE20-U+FE2F */
#define TT_UCR_COMBINING_HALF_MARKS (1L << 0)
/* Bit 65 Vertical forms */
/* CJK Compatibility Forms */
/* U+FE10-U+FE1F */
#define TT_UCR_CJK_COMPATIBILITY_FORMS (1L << 1)
/* U+FE30-U+FE4F */
/* Bit 66 Small Form Variants */
/* U+FE50-U+FE6F */
#define TT_UCR_SMALL_FORM_VARIANTS (1L << 2)
/* Bit 67 Arabic Presentation Forms-B */
/* U+FE70-U+FEFE */
#define TT_UCR_ARABIC_PRESENTATIONS_B (1L << 3)
/* Bit 68 Halfwidth and Fullwidth Forms */
/* U+FF00-U+FFEF */
#define TT_UCR_HALFWIDTH_FULLWIDTH_FORMS (1L << 4)
/* Bit 69 Specials */
/* U+FFF0-U+FFFD */
#define TT_UCR_SPECIALS (1L << 5)
/* Bit 70 Tibetan */
/* U+0F00-U+0FFF */
#define TT_UCR_TIBETAN (1L << 6)
/* Bit 71 Syriac */
/* U+0700-U+074F */
#define TT_UCR_SYRIAC (1L << 7)
/* Bit 72 Thaana */
/* U+0780-U+07BF */
#define TT_UCR_THAANA (1L << 8)
/* Bit 73 Sinhala */
/* U+0D80-U+0DFF */
#define TT_UCR_SINHALA (1L << 9)
/* Bit 74 Myanmar */
/* U+1000-U+109F */
#define TT_UCR_MYANMAR (1L << 10)
/* Bit 75 Ethiopic */
/* Ethiopic Supplement */
/* Ethiopic Extended */
/* U+1200-U+137F */
#define TT_UCR_ETHIOPIC (1L << 11)
/* U+1380-U+139F */
/* U+2D80-U+2DDF */
/* Bit 76 Cherokee */
/* U+13A0-U+13FF */
#define TT_UCR_CHEROKEE (1L << 12)
/* Bit 77 Unified Canadian Aboriginal Syllabics */
/* U+1400-U+167F */
#define TT_UCR_CANADIAN_ABORIGINAL_SYLLABICS (1L << 13)
/* Bit 78 Ogham */
/* U+1680-U+169F */
#define TT_UCR_OGHAM (1L << 14)
/* Bit 79 Runic */
/* U+16A0-U+16FF */
#define TT_UCR_RUNIC (1L << 15)
/* Bit 80 Khmer */
/* Khmer Symbols */
/* U+1780-U+17FF */
#define TT_UCR_KHMER (1L << 16)
/* U+19E0-U+19FF */
/* Bit 81 Mongolian */
/* U+1800-U+18AF */
#define TT_UCR_MONGOLIAN (1L << 17)
/* Bit 82 Braille Patterns */
/* U+2800-U+28FF */
#define TT_UCR_BRAILLE (1L << 18)
/* Bit 83 Yi Syllables */
/* Yi Radicals */
/* U+A000-U+A48F */
#define TT_UCR_YI (1L << 19)
/* U+A490-U+A4CF */
/* Bit 84 Tagalog */
/* Hanunoo */
/* Buhid */
/* Tagbanwa */
/* U+1700-U+171F */
#define TT_UCR_PHILIPPINE (1L << 20)
/* U+1720-U+173F */
/* U+1740-U+175F */
/* U+1760-U+177F */
/* Bit 85 Old Italic */
/*U+10300-U+1032F*/
#define TT_UCR_OLD_ITALIC (1L << 21)
/* Bit 86 Gothic */
/*U+10330-U+1034F*/
#define TT_UCR_GOTHIC (1L << 22)
/* Bit 87 Deseret */
/*U+10400-U+1044F*/
#define TT_UCR_DESERET (1L << 23)
/* Bit 88 Byzantine Musical Symbols */
/* Musical Symbols */
/* Ancient Greek Musical Notation */
/*U+1D000-U+1D0FF*/
#define TT_UCR_MUSICAL_SYMBOLS (1L << 24)
/*U+1D100-U+1D1FF*/
/*U+1D200-U+1D24F*/
/* Bit 89 Mathematical Alphanumeric Symbols */
/*U+1D400-U+1D7FF*/
#define TT_UCR_MATH_ALPHANUMERIC_SYMBOLS (1L << 25)
/* Bit 90 Private Use (plane 15) */
/* Private Use (plane 16) */
/*U+F0000-U+FFFFD*/
#define TT_UCR_PRIVATE_USE_SUPPLEMENTARY (1L << 26)
/*U+100000-U+10FFFD*/
/* Bit 91 Variation Selectors */
/* Variation Selectors Supplement */
/* U+FE00-U+FE0F */
#define TT_UCR_VARIATION_SELECTORS (1L << 27)
/*U+E0100-U+E01EF*/
/* Bit 92 Tags */
/*U+E0000-U+E007F*/
#define TT_UCR_TAGS (1L << 28)
/* Bit 93 Limbu */
/* U+1900-U+194F */
#define TT_UCR_LIMBU (1L << 29)
/* Bit 94 Tai Le */
/* U+1950-U+197F */
#define TT_UCR_TAI_LE (1L << 30)
/* Bit 95 New Tai Lue */
/* U+1980-U+19DF */
#define TT_UCR_NEW_TAI_LUE (1L << 31)
/* Bit 96 Buginese */
/* U+1A00-U+1A1F */
#define TT_UCR_BUGINESE (1L << 0)
/* Bit 97 Glagolitic */
/* U+2C00-U+2C5F */
#define TT_UCR_GLAGOLITIC (1L << 1)
/* Bit 98 Tifinagh */
/* U+2D30-U+2D7F */
#define TT_UCR_TIFINAGH (1L << 2)
/* Bit 99 Yijing Hexagram Symbols */
/* U+4DC0-U+4DFF */
#define TT_UCR_YIJING (1L << 3)
/* Bit 100 Syloti Nagri */
/* U+A800-U+A82F */
#define TT_UCR_SYLOTI_NAGRI (1L << 4)
/* Bit 101 Linear B Syllabary */
/* Linear B Ideograms */
/* Aegean Numbers */
/*U+10000-U+1007F*/
#define TT_UCR_LINEAR_B (1L << 5)
/*U+10080-U+100FF*/
/*U+10100-U+1013F*/
/* Bit 102 Ancient Greek Numbers */
/*U+10140-U+1018F*/
#define TT_UCR_ANCIENT_GREEK_NUMBERS (1L << 6)
/* Bit 103 Ugaritic */
/*U+10380-U+1039F*/
#define TT_UCR_UGARITIC (1L << 7)
/* Bit 104 Old Persian */
/*U+103A0-U+103DF*/
#define TT_UCR_OLD_PERSIAN (1L << 8)
/* Bit 105 Shavian */
/*U+10450-U+1047F*/
#define TT_UCR_SHAVIAN (1L << 9)
/* Bit 106 Osmanya */
/*U+10480-U+104AF*/
#define TT_UCR_OSMANYA (1L << 10)
/* Bit 107 Cypriot Syllabary */
/*U+10800-U+1083F*/
#define TT_UCR_CYPRIOT_SYLLABARY (1L << 11)
/* Bit 108 Kharoshthi */
/*U+10A00-U+10A5F*/
#define TT_UCR_KHAROSHTHI (1L << 12)
/* Bit 109 Tai Xuan Jing Symbols */
/*U+1D300-U+1D35F*/
#define TT_UCR_TAI_XUAN_JING (1L << 13)
/* Bit 110 Cuneiform */
/* Cuneiform Numbers and Punctuation */
/*U+12000-U+123FF*/
#define TT_UCR_CUNEIFORM (1L << 14)
/*U+12400-U+1247F*/
/* Bit 111 Counting Rod Numerals */
/*U+1D360-U+1D37F*/
#define TT_UCR_COUNTING_ROD_NUMERALS (1L << 15)
/* Bit 112 Sundanese */
/* U+1B80-U+1BBF */
#define TT_UCR_SUNDANESE (1L << 16)
/* Bit 113 Lepcha */
/* U+1C00-U+1C4F */
#define TT_UCR_LEPCHA (1L << 17)
/* Bit 114 Ol Chiki */
/* U+1C50-U+1C7F */
#define TT_UCR_OL_CHIKI (1L << 18)
/* Bit 115 Saurashtra */
/* U+A880-U+A8DF */
#define TT_UCR_SAURASHTRA (1L << 19)
/* Bit 116 Kayah Li */
/* U+A900-U+A92F */
#define TT_UCR_KAYAH_LI (1L << 20)
/* Bit 117 Rejang */
/* U+A930-U+A95F */
#define TT_UCR_REJANG (1L << 21)
/* Bit 118 Cham */
/* U+AA00-U+AA5F */
#define TT_UCR_CHAM (1L << 22)
/* Bit 119 Ancient Symbols */
/*U+10190-U+101CF*/
#define TT_UCR_ANCIENT_SYMBOLS (1L << 23)
/* Bit 120 Phaistos Disc */
/*U+101D0-U+101FF*/
#define TT_UCR_PHAISTOS_DISC (1L << 24)
/* Bit 121 Carian */
/* Lycian */
/* Lydian */
/*U+102A0-U+102DF*/
#define TT_UCR_OLD_ANATOLIAN (1L << 25)
/*U+10280-U+1029F*/
/*U+10920-U+1093F*/
/* Bit 122 Domino Tiles */
/* Mahjong Tiles */
/*U+1F030-U+1F09F*/
#define TT_UCR_GAME_TILES (1L << 26)
/*U+1F000-U+1F02F*/
/* Bit 123-127 Reserved for process-internal usage */
/*************************************************************************/
/* */
/* Some compilers have a very limited length of identifiers. */
/* */
#if defined( __TURBOC__ ) && __TURBOC__ < 0x0410 || defined( __PACIFIC__ )
#define HAVE_LIMIT_ON_IDENTS
#endif
#ifndef HAVE_LIMIT_ON_IDENTS
/*************************************************************************/
/* */
/* Here some alias #defines in order to be clearer. */
/* */
/* These are not always #defined to stay within the 31~character limit */
/* which some compilers have. */
/* */
/* Credits go to Dave Hoo <dhoo@flash.net> for pointing out that modern */
/* Borland compilers (read: from BC++ 3.1 on) can increase this limit. */
/* If you get a warning with such a compiler, use the -i40 switch. */
/* */
#define TT_UCR_ARABIC_PRESENTATION_FORMS_A \
TT_UCR_ARABIC_PRESENTATIONS_A
#define TT_UCR_ARABIC_PRESENTATION_FORMS_B \
TT_UCR_ARABIC_PRESENTATIONS_B
#define TT_UCR_COMBINING_DIACRITICAL_MARKS \
TT_UCR_COMBINING_DIACRITICS
#define TT_UCR_COMBINING_DIACRITICAL_MARKS_SYMB \
TT_UCR_COMBINING_DIACRITICS_SYMB
/* !HAVE_LIMIT_ON_IDENTS */
#endif
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* svprop.h */
/* */
/* The FreeType property service (specification). */
/* */
/* Copyright 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVPROP_H__
FT_BEGIN_HEADER
#define FT_SERVICE_ID_PROPERTIES "properties"
typedef FT_Error
(*FT_Properties_SetFunc)( FT_Module module,
const char* property_name,
const void* value );
typedef FT_Error
(*FT_Properties_GetFunc)( FT_Module module,
const char* property_name,
void* value );
FT_DEFINE_SERVICE( Properties )
{
FT_Properties_SetFunc set_property;
FT_Properties_GetFunc get_property;
};
#define FT_DEFINE_SERVICE_PROPERTIESREC( class_, \
set_property_, \
get_property_ ) \
static const FT_Service_PropertiesRec class_ = \
{ \
set_property_, \
get_property_ \
};
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* svsfnt.h */
/* */
/* The FreeType SFNT table loading service (specification). */
/* */
/* Copyright 2003, 2004, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVSFNT_H__
FT_BEGIN_HEADER
/*
* SFNT table loading service.
*/
#define FT_SERVICE_ID_SFNT_TABLE "sfnt-table"
/*
* Used to implement FT_Load_Sfnt_Table().
*/
typedef FT_Error
(*FT_SFNT_TableLoadFunc)( FT_Face face,
FT_ULong tag,
FT_Long offset,
FT_Byte* buffer,
FT_ULong* length );
/*
* Used to implement FT_Get_Sfnt_Table().
*/
typedef void*
(*FT_SFNT_TableGetFunc)( FT_Face face,
FT_Sfnt_Tag tag );
/*
* Used to implement FT_Sfnt_Table_Info().
*/
typedef FT_Error
(*FT_SFNT_TableInfoFunc)( FT_Face face,
FT_UInt idx,
FT_ULong *tag,
FT_ULong *offset,
FT_ULong *length );
FT_DEFINE_SERVICE( SFNT_Table )
{
FT_SFNT_TableLoadFunc load_table;
FT_SFNT_TableGetFunc get_table;
FT_SFNT_TableInfoFunc table_info;
};
#define FT_DEFINE_SERVICE_SFNT_TABLEREC( class_, load_, get_, info_ ) \
static const FT_Service_SFNT_TableRec class_ = \
{ \
load_, get_, info_ \
};
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* svpostnm.h */
/* */
/* The FreeType PostScript name services (specification). */
/* */
/* Copyright 2003, 2007, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVPOSTNM_H__
FT_BEGIN_HEADER
/*
* A trivial service used to retrieve the PostScript name of a given
* font when available. The `get_name' field should never be NULL.
*
* The corresponding function can return NULL to indicate that the
* PostScript name is not available.
*
* The name is owned by the face and will be destroyed with it.
*/
#define FT_SERVICE_ID_POSTSCRIPT_FONT_NAME "postscript-font-name"
typedef const char*
(*FT_PsName_GetFunc)( FT_Face face );
FT_DEFINE_SERVICE( PsFontName )
{
FT_PsName_GetFunc get_ps_font_name;
};
#define FT_DEFINE_SERVICE_PSFONTNAMEREC( class_, get_ps_font_name_ ) \
static const FT_Service_PsFontNameRec class_ = \
{ \
get_ps_font_name_ \
};
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* svgldict.h */
/* */
/* The FreeType glyph dictionary services (specification). */
/* */
/* Copyright 2003, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVGLDICT_H__
FT_BEGIN_HEADER
/*
* A service used to retrieve glyph names, as well as to find the
* index of a given glyph name in a font.
*
*/
#define FT_SERVICE_ID_GLYPH_DICT "glyph-dict"
typedef FT_Error
(*FT_GlyphDict_GetNameFunc)( FT_Face face,
FT_UInt glyph_index,
FT_Pointer buffer,
FT_UInt buffer_max );
typedef FT_UInt
(*FT_GlyphDict_NameIndexFunc)( FT_Face face,
FT_String* glyph_name );
FT_DEFINE_SERVICE( GlyphDict )
{
FT_GlyphDict_GetNameFunc get_name;
/* optional */
FT_GlyphDict_NameIndexFunc name_index;
};
#define FT_DEFINE_SERVICE_GLYPHDICTREC( class_, \
get_name_, \
name_index_) \
static const FT_Service_GlyphDictRec class_ = \
{ \
get_name_, name_index_ \
};
/* */
FT_END_HEADER
/***************************************************************************/
/* */
/* svttcmap.h */
/* */
/* The FreeType TrueType/sfnt cmap extra information service. */
/* */
/* Copyright 2003 by */
/* Masatake YAMATO, Redhat K.K. */
/* */
/* Copyright 2003, 2008, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* Development of this service is support of
Information-technology Promotion Agency, Japan. */
#define __SVTTCMAP_H__
FT_BEGIN_HEADER
#define FT_SERVICE_ID_TT_CMAP "tt-cmaps"
/*************************************************************************/
/* */
/* <Struct> */
/* TT_CMapInfo */
/* */
/* <Description> */
/* A structure used to store TrueType/sfnt specific cmap information */
/* which is not covered by the generic @FT_CharMap structure. This */
/* structure can be accessed with the @FT_Get_TT_CMap_Info function. */
/* */
/* <Fields> */
/* language :: */
/* The language ID used in Mac fonts. Definitions of values are in */
/* freetype/ttnameid.h. */
/* */
/* format :: */
/* The cmap format. OpenType 1.5 defines the formats 0 (byte */
/* encoding table), 2~(high-byte mapping through table), 4~(segment */
/* mapping to delta values), 6~(trimmed table mapping), 8~(mixed */
/* 16-bit and 32-bit coverage), 10~(trimmed array), 12~(segmented */
/* coverage), and 14 (Unicode Variation Sequences). */
/* */
typedef struct TT_CMapInfo_
{
FT_ULong language;
FT_Long format;
} TT_CMapInfo;
typedef FT_Error
(*TT_CMap_Info_GetFunc)( FT_CharMap charmap,
TT_CMapInfo *cmap_info );
FT_DEFINE_SERVICE( TTCMaps )
{
TT_CMap_Info_GetFunc get_cmap_info;
};
#define FT_DEFINE_SERVICE_TTCMAPSREC( class_, get_cmap_info_ ) \
static const FT_Service_TTCMapsRec class_ = \
{ \
get_cmap_info_ \
};
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* svkern.h */
/* */
/* The FreeType Kerning service (specification). */
/* */
/* Copyright 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVKERN_H__
FT_BEGIN_HEADER
#define FT_SERVICE_ID_KERNING "kerning"
typedef FT_Error
(*FT_Kerning_TrackGetFunc)( FT_Face face,
FT_Fixed point_size,
FT_Int degree,
FT_Fixed* akerning );
FT_DEFINE_SERVICE( Kerning )
{
FT_Kerning_TrackGetFunc get_track;
};
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* svtteng.h */
/* */
/* The FreeType TrueType engine query service (specification). */
/* */
/* Copyright 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVTTENG_H__
FT_BEGIN_HEADER
/*
* SFNT table loading service.
*/
#define FT_SERVICE_ID_TRUETYPE_ENGINE "truetype-engine"
/*
* Used to implement FT_Get_TrueType_Engine_Type
*/
FT_DEFINE_SERVICE( TrueTypeEngine )
{
FT_TrueTypeEngineType engine_type;
};
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftbase.h */
/* */
/* The FreeType private functions used in base module (specification). */
/* */
/* Copyright 2008, 2010 by */
/* David Turner, Robert Wilhelm, Werner Lemberg, and suzuki toshiya. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTBASE_H__
FT_BEGIN_HEADER
/* Assume the stream is sfnt-wrapped PS Type1 or sfnt-wrapped CID-keyed */
/* font, and try to load a face specified by the face_index. */
FT_LOCAL( FT_Error )
open_face_PS_from_sfnt_stream( FT_Library library,
FT_Stream stream,
FT_Long face_index,
FT_Int num_params,
FT_Parameter *params,
FT_Face *aface );
/* Create a new FT_Face given a buffer and a driver name. */
/* From ftmac.c. */
FT_LOCAL( FT_Error )
open_face_from_buffer( FT_Library library,
FT_Byte* base,
FT_ULong size,
FT_Long face_index,
const char* driver_name,
FT_Face *aface );
#if defined( FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK ) && \
!defined( FT_MACINTOSH )
/* Mac OS X/Darwin kernel often changes recommended method to access */
/* the resource fork and older methods makes the kernel issue the */
/* warning of deprecated method. To calm it down, the methods based */
/* on Darwin VFS should be grouped and skip the rest methods after */
/* the case the resource is opened but found to lack a font in it. */
FT_LOCAL( FT_Bool )
ft_raccess_rule_by_darwin_vfs( FT_Library library, FT_UInt rule_index );
#endif
FT_END_HEADER
/* END */
#define GRID_FIT_METRICS
FT_BASE_DEF( FT_Pointer )
ft_service_list_lookup( FT_ServiceDesc service_descriptors,
const char* service_id )
{
FT_Pointer result = NULL;
FT_ServiceDesc desc = service_descriptors;
if ( desc && service_id )
{
for ( ; desc->serv_id != NULL; desc++ )
{
if ( ft_strcmp( desc->serv_id, service_id ) == 0 )
{
result = (FT_Pointer)desc->serv_data;
break;
}
}
}
return result;
}
FT_BASE_DEF( void )
ft_validator_init( FT_Validator valid,
const FT_Byte* base,
const FT_Byte* limit,
FT_ValidationLevel level )
{
valid->base = base;
valid->limit = limit;
valid->level = level;
valid->error = FT_Err_Ok;
}
FT_BASE_DEF( FT_Int )
ft_validator_run( FT_Validator valid )
{
/* This function doesn't work! None should call it. */
FT_UNUSED( valid );
return -1;
}
FT_BASE_DEF( void )
ft_validator_error( FT_Validator valid,
FT_Error error )
{
/* since the cast below also disables the compiler's */
/* type check, we introduce a dummy variable, which */
/* will be optimized away */
volatile ft_jmp_buf* jump_buffer = &valid->jump_buffer;
valid->error = error;
/* throw away volatileness; use `jump_buffer' or the */
/* compiler may warn about an unused local variable */
ft_longjmp( *(ft_jmp_buf*) jump_buffer, 1 );
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** S T R E A M ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* create a new input stream from an FT_Open_Args structure */
/* */
FT_BASE_DEF( FT_Error )
FT_Stream_New( FT_Library library,
const FT_Open_Args* args,
FT_Stream *astream )
{
FT_Error error;
FT_Memory memory;
FT_Stream stream = NULL;
*astream = 0;
if ( !library )
return FT_Err_Invalid_Library_Handle;
if ( !args )
return FT_Err_Invalid_Argument;
memory = library->memory;
if ( FT_NEW( stream ) )
goto Exit;
stream->memory = memory;
if ( args->flags & FT_OPEN_MEMORY )
{
/* create a memory-based stream */
FT_Stream_OpenMemory( stream,
(const FT_Byte*)args->memory_base,
args->memory_size );
}
else if ( args->flags & FT_OPEN_PATHNAME )
{
/* create a normal system stream */
error = FT_Stream_Open( stream, args->pathname );
stream->pathname.pointer = args->pathname;
}
else if ( ( args->flags & FT_OPEN_STREAM ) && args->stream )
{
/* use an existing, user-provided stream */
/* in this case, we do not need to allocate a new stream object */
/* since the caller is responsible for closing it himself */
FT_FREE( stream );
stream = args->stream;
}
else
error = FT_Err_Invalid_Argument;
if ( error )
FT_FREE( stream );
else
/* just to be certain */
stream->memory = memory;
*astream = stream;
Exit:
return error;
}
FT_BASE_DEF( void )
FT_Stream_Free( FT_Stream stream,
FT_Int external )
{
if ( stream )
{
FT_Memory memory = stream->memory;
FT_Stream_Close( stream );
if ( !external )
FT_FREE( stream );
}
}
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_objs
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** FACE, SIZE & GLYPH SLOT OBJECTS ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
static FT_Error
ft_glyphslot_init( FT_GlyphSlot slot )
{
FT_Driver driver = slot->face->driver;
FT_Driver_Class clazz = driver->clazz;
FT_Memory memory = driver->root.memory;
FT_Error error = FT_Err_Ok;
FT_Slot_Internal internal = NULL;
slot->library = driver->root.library;
if ( FT_NEW( internal ) )
goto Exit;
slot->internal = internal;
if ( FT_DRIVER_USES_OUTLINES( driver ) )
error = FT_GlyphLoader_New( memory, &internal->loader );
if ( !error && clazz->init_slot )
error = clazz->init_slot( slot );
Exit:
return error;
}
FT_BASE_DEF( void )
ft_glyphslot_free_bitmap( FT_GlyphSlot slot )
{
if ( slot->internal && ( slot->internal->flags & FT_GLYPH_OWN_BITMAP ) )
{
FT_Memory memory = FT_FACE_MEMORY( slot->face );
FT_FREE( slot->bitmap.buffer );
slot->internal->flags &= ~FT_GLYPH_OWN_BITMAP;
}
else
{
/* assume that the bitmap buffer was stolen or not */
/* allocated from the heap */
slot->bitmap.buffer = NULL;
}
}
FT_BASE_DEF( void )
ft_glyphslot_set_bitmap( FT_GlyphSlot slot,
FT_Byte* buffer )
{
ft_glyphslot_free_bitmap( slot );
slot->bitmap.buffer = buffer;
FT_ASSERT( (slot->internal->flags & FT_GLYPH_OWN_BITMAP) == 0 );
}
FT_BASE_DEF( FT_Error )
ft_glyphslot_alloc_bitmap( FT_GlyphSlot slot,
FT_ULong size )
{
FT_Memory memory = FT_FACE_MEMORY( slot->face );
FT_Error error;
if ( slot->internal->flags & FT_GLYPH_OWN_BITMAP )
FT_FREE( slot->bitmap.buffer );
else
slot->internal->flags |= FT_GLYPH_OWN_BITMAP;
(void)FT_ALLOC( slot->bitmap.buffer, size );
return error;
}
static void
ft_glyphslot_clear( FT_GlyphSlot slot )
{
/* free bitmap if needed */
ft_glyphslot_free_bitmap( slot );
/* clear all public fields in the glyph slot */
FT_ZERO( &slot->metrics );
FT_ZERO( &slot->outline );
slot->bitmap.width = 0;
slot->bitmap.rows = 0;
slot->bitmap.pitch = 0;
slot->bitmap.pixel_mode = 0;
/* `slot->bitmap.buffer' has been handled by ft_glyphslot_free_bitmap */
slot->bitmap_left = 0;
slot->bitmap_top = 0;
slot->num_subglyphs = 0;
slot->subglyphs = 0;
slot->control_data = 0;
slot->control_len = 0;
slot->other = 0;
slot->format = FT_GLYPH_FORMAT_NONE;
slot->linearHoriAdvance = 0;
slot->linearVertAdvance = 0;
slot->lsb_delta = 0;
slot->rsb_delta = 0;
}
static void
ft_glyphslot_done( FT_GlyphSlot slot )
{
FT_Driver driver = slot->face->driver;
FT_Driver_Class clazz = driver->clazz;
FT_Memory memory = driver->root.memory;
if ( clazz->done_slot )
clazz->done_slot( slot );
/* free bitmap buffer if needed */
ft_glyphslot_free_bitmap( slot );
/* slot->internal might be NULL in out-of-memory situations */
if ( slot->internal )
{
/* free glyph loader */
if ( FT_DRIVER_USES_OUTLINES( driver ) )
{
FT_GlyphLoader_Done( slot->internal->loader );
slot->internal->loader = 0;
}
FT_FREE( slot->internal );
}
}
/* documentation is in ftobjs.h */
FT_BASE_DEF( FT_Error )
FT_New_GlyphSlot( FT_Face face,
FT_GlyphSlot *aslot )
{
FT_Error error;
FT_Driver driver;
FT_Driver_Class clazz;
FT_Memory memory;
FT_GlyphSlot slot = NULL;
if ( !face || !face->driver )
return FT_Err_Invalid_Argument;
driver = face->driver;
clazz = driver->clazz;
memory = driver->root.memory;
FT_TRACE4(( "FT_New_GlyphSlot: Creating new slot object\n" ));
if ( !FT_ALLOC( slot, clazz->slot_object_size ) )
{
slot->face = face;
error = ft_glyphslot_init( slot );
if ( error )
{
ft_glyphslot_done( slot );
FT_FREE( slot );
goto Exit;
}
slot->next = face->glyph;
face->glyph = slot;
if ( aslot )
*aslot = slot;
}
else if ( aslot )
*aslot = 0;
Exit:
FT_TRACE4(( "FT_New_GlyphSlot: Return %d\n", error ));
return error;
}
/* documentation is in ftobjs.h */
FT_BASE_DEF( void )
FT_Done_GlyphSlot( FT_GlyphSlot slot )
{
if ( slot )
{
FT_Driver driver = slot->face->driver;
FT_Memory memory = driver->root.memory;
FT_GlyphSlot prev;
FT_GlyphSlot cur;
/* Remove slot from its parent face's list */
prev = NULL;
cur = slot->face->glyph;
while ( cur )
{
if ( cur == slot )
{
if ( !prev )
slot->face->glyph = cur->next;
else
prev->next = cur->next;
/* finalize client-specific data */
if ( slot->generic.finalizer )
slot->generic.finalizer( slot );
ft_glyphslot_done( slot );
FT_FREE( slot );
break;
}
prev = cur;
cur = cur->next;
}
}
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( void )
FT_Set_Transform( FT_Face face,
FT_Matrix* matrix,
FT_Vector* delta )
{
FT_Face_Internal internal;
if ( !face )
return;
internal = face->internal;
internal->transform_flags = 0;
if ( !matrix )
{
internal->transform_matrix.xx = 0x10000L;
internal->transform_matrix.xy = 0;
internal->transform_matrix.yx = 0;
internal->transform_matrix.yy = 0x10000L;
matrix = &internal->transform_matrix;
}
else
internal->transform_matrix = *matrix;
/* set transform_flags bit flag 0 if `matrix' isn't the identity */
if ( ( matrix->xy | matrix->yx ) ||
matrix->xx != 0x10000L ||
matrix->yy != 0x10000L )
internal->transform_flags |= 1;
if ( !delta )
{
internal->transform_delta.x = 0;
internal->transform_delta.y = 0;
delta = &internal->transform_delta;
}
else
internal->transform_delta = *delta;
/* set transform_flags bit flag 1 if `delta' isn't the null vector */
if ( delta->x | delta->y )
internal->transform_flags |= 2;
}
static FT_Renderer
ft_lookup_glyph_renderer( FT_GlyphSlot slot );
#ifdef GRID_FIT_METRICS
static void
ft_glyphslot_grid_fit_metrics( FT_GlyphSlot slot,
FT_Bool vertical )
{
FT_Glyph_Metrics* metrics = &slot->metrics;
FT_Pos right, bottom;
if ( vertical )
{
metrics->horiBearingX = FT_PIX_FLOOR( metrics->horiBearingX );
metrics->horiBearingY = FT_PIX_CEIL ( metrics->horiBearingY );
right = FT_PIX_CEIL( metrics->vertBearingX + metrics->width );
bottom = FT_PIX_CEIL( metrics->vertBearingY + metrics->height );
metrics->vertBearingX = FT_PIX_FLOOR( metrics->vertBearingX );
metrics->vertBearingY = FT_PIX_FLOOR( metrics->vertBearingY );
metrics->width = right - metrics->vertBearingX;
metrics->height = bottom - metrics->vertBearingY;
}
else
{
metrics->vertBearingX = FT_PIX_FLOOR( metrics->vertBearingX );
metrics->vertBearingY = FT_PIX_FLOOR( metrics->vertBearingY );
right = FT_PIX_CEIL ( metrics->horiBearingX + metrics->width );
bottom = FT_PIX_FLOOR( metrics->horiBearingY - metrics->height );
metrics->horiBearingX = FT_PIX_FLOOR( metrics->horiBearingX );
metrics->horiBearingY = FT_PIX_CEIL ( metrics->horiBearingY );
metrics->width = right - metrics->horiBearingX;
metrics->height = metrics->horiBearingY - bottom;
}
metrics->horiAdvance = FT_PIX_ROUND( metrics->horiAdvance );
metrics->vertAdvance = FT_PIX_ROUND( metrics->vertAdvance );
}
/* GRID_FIT_METRICS */
#endif
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Load_Glyph( FT_Face face,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
FT_Driver driver;
FT_GlyphSlot slot;
FT_Library library;
FT_Bool autohint = FALSE;
FT_Module hinter;
TT_Face ttface = (TT_Face)face;
if ( !face || !face->size || !face->glyph )
return FT_Err_Invalid_Face_Handle;
/* The validity test for `glyph_index' is performed by the */
/* font drivers. */
slot = face->glyph;
ft_glyphslot_clear( slot );
driver = face->driver;
library = driver->root.library;
hinter = library->auto_hinter;
/* resolve load flags dependencies */
if ( load_flags & FT_LOAD_NO_RECURSE )
load_flags |= FT_LOAD_NO_SCALE |
FT_LOAD_IGNORE_TRANSFORM;
if ( load_flags & FT_LOAD_NO_SCALE )
{
load_flags |= FT_LOAD_NO_HINTING |
FT_LOAD_NO_BITMAP;
load_flags &= ~FT_LOAD_RENDER;
}
/*
* Determine whether we need to auto-hint or not.
* The general rules are:
*
* - Do only auto-hinting if we have a hinter module, a scalable font
* format dealing with outlines, and no transforms except simple
* slants and/or rotations by integer multiples of 90 degrees.
*
* - Then, auto-hint if FT_LOAD_FORCE_AUTOHINT is set or if we don't
* have a native font hinter.
*
* - Otherwise, auto-hint for LIGHT hinting mode or if there isn't
* any hinting bytecode in the TrueType/OpenType font.
*
* - Exception: The font is `tricky' and requires the native hinter to
* load properly.
*/
if ( hinter &&
!( load_flags & FT_LOAD_NO_HINTING ) &&
!( load_flags & FT_LOAD_NO_AUTOHINT ) &&
FT_DRIVER_IS_SCALABLE( driver ) &&
FT_DRIVER_USES_OUTLINES( driver ) &&
!FT_IS_TRICKY( face ) &&
( ( load_flags & FT_LOAD_IGNORE_TRANSFORM ) ||
( face->internal->transform_matrix.yx == 0 &&
face->internal->transform_matrix.xx != 0 ) ||
( face->internal->transform_matrix.xx == 0 &&
face->internal->transform_matrix.yx != 0 ) ) )
{
if ( ( load_flags & FT_LOAD_FORCE_AUTOHINT ) ||
!FT_DRIVER_HAS_HINTER( driver ) )
autohint = TRUE;
else
{
FT_Render_Mode mode = FT_LOAD_TARGET_MODE( load_flags );
/* the check for `num_locations' assures that we actually */
/* test for instructions in a TTF and not in a CFF-based OTF */
if ( mode == FT_RENDER_MODE_LIGHT ||
face->internal->ignore_unpatented_hinter ||
( FT_IS_SFNT( face ) &&
ttface->num_locations &&
ttface->max_profile.maxSizeOfInstructions == 0 ) )
autohint = TRUE;
}
}
if ( autohint )
{
FT_AutoHinter_Interface hinting;
/* try to load embedded bitmaps first if available */
/* */
/* XXX: This is really a temporary hack that should disappear */
/* promptly with FreeType 2.1! */
/* */
if ( FT_HAS_FIXED_SIZES( face ) &&
( load_flags & FT_LOAD_NO_BITMAP ) == 0 )
{
error = driver->clazz->load_glyph( slot, face->size,
glyph_index,
load_flags | FT_LOAD_SBITS_ONLY );
if ( !error && slot->format == FT_GLYPH_FORMAT_BITMAP )
goto Load_Ok;
}
{
FT_Face_Internal internal = face->internal;
FT_Int transform_flags = internal->transform_flags;
/* since the auto-hinter calls FT_Load_Glyph by itself, */
/* make sure that glyphs aren't transformed */
internal->transform_flags = 0;
/* load auto-hinted outline */
hinting = (FT_AutoHinter_Interface)hinter->clazz->module_interface;
error = hinting->load_glyph( (FT_AutoHinter)hinter,
slot, face->size,
glyph_index, load_flags );
internal->transform_flags = transform_flags;
}
}
else
{
error = driver->clazz->load_glyph( slot,
face->size,
glyph_index,
load_flags );
if ( error )
goto Exit;
if ( slot->format == FT_GLYPH_FORMAT_OUTLINE )
{
/* check that the loaded outline is correct */
error = FT_Outline_Check( &slot->outline );
if ( error )
goto Exit;
#ifdef GRID_FIT_METRICS
if ( !( load_flags & FT_LOAD_NO_HINTING ) )
ft_glyphslot_grid_fit_metrics( slot,
FT_BOOL( load_flags & FT_LOAD_VERTICAL_LAYOUT ) );
#endif
}
}
Load_Ok:
/* compute the advance */
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
slot->advance.x = 0;
slot->advance.y = slot->metrics.vertAdvance;
}
else
{
slot->advance.x = slot->metrics.horiAdvance;
slot->advance.y = 0;
}
/* compute the linear advance in 16.16 pixels */
if ( ( load_flags & FT_LOAD_LINEAR_DESIGN ) == 0 &&
( FT_IS_SCALABLE( face ) ) )
{
FT_Size_Metrics* metrics = &face->size->metrics;
/* it's tricky! */
slot->linearHoriAdvance = FT_MulDiv( slot->linearHoriAdvance,
metrics->x_scale, 64 );
slot->linearVertAdvance = FT_MulDiv( slot->linearVertAdvance,
metrics->y_scale, 64 );
}
if ( ( load_flags & FT_LOAD_IGNORE_TRANSFORM ) == 0 )
{
FT_Face_Internal internal = face->internal;
/* now, transform the glyph image if needed */
if ( internal->transform_flags )
{
/* get renderer */
FT_Renderer renderer = ft_lookup_glyph_renderer( slot );
if ( renderer )
error = renderer->clazz->transform_glyph(
renderer, slot,
&internal->transform_matrix,
&internal->transform_delta );
else if ( slot->format == FT_GLYPH_FORMAT_OUTLINE )
{
/* apply `standard' transformation if no renderer is available */
if ( internal->transform_flags & 1 )
FT_Outline_Transform( &slot->outline,
&internal->transform_matrix );
if ( internal->transform_flags & 2 )
FT_Outline_Translate( &slot->outline,
internal->transform_delta.x,
internal->transform_delta.y );
}
/* transform advance */
FT_Vector_Transform( &slot->advance, &internal->transform_matrix );
}
}
FT_TRACE5(( " x advance: %d\n" , slot->advance.x ));
FT_TRACE5(( " y advance: %d\n" , slot->advance.y ));
FT_TRACE5(( " linear x advance: %d\n" , slot->linearHoriAdvance ));
FT_TRACE5(( " linear y advance: %d\n" , slot->linearVertAdvance ));
/* do we need to render the image now? */
if ( !error &&
slot->format != FT_GLYPH_FORMAT_BITMAP &&
slot->format != FT_GLYPH_FORMAT_COMPOSITE &&
load_flags & FT_LOAD_RENDER )
{
FT_Render_Mode mode = FT_LOAD_TARGET_MODE( load_flags );
if ( mode == FT_RENDER_MODE_NORMAL &&
(load_flags & FT_LOAD_MONOCHROME ) )
mode = FT_RENDER_MODE_MONO;
error = FT_Render_Glyph( slot, mode );
}
Exit:
return error;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Load_Char( FT_Face face,
FT_ULong char_code,
FT_Int32 load_flags )
{
FT_UInt glyph_index;
if ( !face )
return FT_Err_Invalid_Face_Handle;
glyph_index = (FT_UInt)char_code;
if ( face->charmap )
glyph_index = FT_Get_Char_Index( face, char_code );
return FT_Load_Glyph( face, glyph_index, load_flags );
}
/* destructor for sizes list */
static void
destroy_size( FT_Memory memory,
FT_Size size,
FT_Driver driver )
{
/* finalize client-specific data */
if ( size->generic.finalizer )
size->generic.finalizer( size );
/* finalize format-specific stuff */
if ( driver->clazz->done_size )
driver->clazz->done_size( size );
FT_FREE( size->internal );
FT_FREE( size );
}
static void
ft_cmap_done_internal( FT_CMap cmap );
static void
destroy_charmaps( FT_Face face,
FT_Memory memory )
{
FT_Int n;
if ( !face )
return;
for ( n = 0; n < face->num_charmaps; n++ )
{
FT_CMap cmap = FT_CMAP( face->charmaps[n] );
ft_cmap_done_internal( cmap );
face->charmaps[n] = NULL;
}
FT_FREE( face->charmaps );
face->num_charmaps = 0;
}
/* destructor for faces list */
static void
destroy_face( FT_Memory memory,
FT_Face face,
FT_Driver driver )
{
FT_Driver_Class clazz = driver->clazz;
/* discard auto-hinting data */
if ( face->autohint.finalizer )
face->autohint.finalizer( face->autohint.data );
/* Discard glyph slots for this face. */
/* Beware! FT_Done_GlyphSlot() changes the field `face->glyph' */
while ( face->glyph )
FT_Done_GlyphSlot( face->glyph );
/* discard all sizes for this face */
FT_List_Finalize( &face->sizes_list,
(FT_List_Destructor)destroy_size,
memory,
driver );
face->size = 0;
/* now discard client data */
if ( face->generic.finalizer )
face->generic.finalizer( face );
/* discard charmaps */
destroy_charmaps( face, memory );
/* finalize format-specific stuff */
if ( clazz->done_face )
clazz->done_face( face );
/* close the stream for this face if needed */
FT_Stream_Free(
face->stream,
( face->face_flags & FT_FACE_FLAG_EXTERNAL_STREAM ) != 0 );
face->stream = 0;
/* get rid of it */
if ( face->internal )
{
FT_FREE( face->internal );
}
FT_FREE( face );
}
static void
Destroy_Driver( FT_Driver driver )
{
FT_List_Finalize( &driver->faces_list,
(FT_List_Destructor)destroy_face,
driver->root.memory,
driver );
/* check whether we need to drop the driver's glyph loader */
if ( FT_DRIVER_USES_OUTLINES( driver ) )
FT_GlyphLoader_Done( driver->glyph_loader );
}
/*************************************************************************/
/* */
/* <Function> */
/* find_unicode_charmap */
/* */
/* <Description> */
/* This function finds a Unicode charmap, if there is one. */
/* And if there is more than one, it tries to favour the more */
/* extensive one, i.e., one that supports UCS-4 against those which */
/* are limited to the BMP (said UCS-2 encoding.) */
/* */
/* This function is called from open_face() (just below), and also */
/* from FT_Select_Charmap( ..., FT_ENCODING_UNICODE ). */
/* */
static FT_Error
find_unicode_charmap( FT_Face face )
{
FT_CharMap* first;
FT_CharMap* cur;
/* caller should have already checked that `face' is valid */
FT_ASSERT( face );
first = face->charmaps;
if ( !first )
return FT_Err_Invalid_CharMap_Handle;
/*
* The original TrueType specification(s) only specified charmap
* formats that are capable of mapping 8 or 16 bit character codes to
* glyph indices.
*
* However, recent updates to the Apple and OpenType specifications
* introduced new formats that are capable of mapping 32-bit character
* codes as well. And these are already used on some fonts, mainly to
* map non-BMP Asian ideographs as defined in Unicode.
*
* For compatibility purposes, these fonts generally come with
* *several* Unicode charmaps:
*
* - One of them in the "old" 16-bit format, that cannot access
* all glyphs in the font.
*
* - Another one in the "new" 32-bit format, that can access all
* the glyphs.
*
* This function has been written to always favor a 32-bit charmap
* when found. Otherwise, a 16-bit one is returned when found.
*/
/* Since the `interesting' table, with IDs (3,10), is normally the */
/* last one, we loop backwards. This loses with type1 fonts with */
/* non-BMP characters (<.0001%), this wins with .ttf with non-BMP */
/* chars (.01% ?), and this is the same about 99.99% of the time! */
/* points after the last one */
cur = first + face->num_charmaps;
for ( ; --cur >= first; )
{
if ( cur[0]->encoding == FT_ENCODING_UNICODE )
{
/* XXX If some new encodings to represent UCS-4 are added, */
/* they should be added here. */
if ( ( cur[0]->platform_id == TT_PLATFORM_MICROSOFT &&
cur[0]->encoding_id == TT_MS_ID_UCS_4 ) ||
( cur[0]->platform_id == TT_PLATFORM_APPLE_UNICODE &&
cur[0]->encoding_id == TT_APPLE_ID_UNICODE_32 ) )
{
#ifdef FT_MAX_CHARMAP_CACHEABLE
if ( cur - first > FT_MAX_CHARMAP_CACHEABLE )
{
FT_ERROR(( "find_unicode_charmap: UCS-4 cmap is found "
"at too late position (%d)\n", cur - first ));
continue;
}
#endif
face->charmap = cur[0];
return FT_Err_Ok;
}
}
}
/* We do not have any UCS-4 charmap. */
/* Do the loop again and search for UCS-2 charmaps. */
cur = first + face->num_charmaps;
for ( ; --cur >= first; )
{
if ( cur[0]->encoding == FT_ENCODING_UNICODE )
{
#ifdef FT_MAX_CHARMAP_CACHEABLE
if ( cur - first > FT_MAX_CHARMAP_CACHEABLE )
{
FT_ERROR(( "find_unicode_charmap: UCS-2 cmap is found "
"at too late position (%d)\n", cur - first ));
continue;
}
#endif
face->charmap = cur[0];
return FT_Err_Ok;
}
}
return FT_Err_Invalid_CharMap_Handle;
}
/*************************************************************************/
/* */
/* <Function> */
/* find_variant_selector_charmap */
/* */
/* <Description> */
/* This function finds the variant selector charmap, if there is one. */
/* There can only be one (platform=0, specific=5, format=14). */
/* */
static FT_CharMap
find_variant_selector_charmap( FT_Face face )
{
FT_CharMap* first;
FT_CharMap* end;
FT_CharMap* cur;
/* caller should have already checked that `face' is valid */
FT_ASSERT( face );
first = face->charmaps;
if ( !first )
return NULL;
/* points after the last one */
end = first + face->num_charmaps;
for ( cur = first; cur < end; ++cur )
{
if ( cur[0]->platform_id == TT_PLATFORM_APPLE_UNICODE &&
cur[0]->encoding_id == TT_APPLE_ID_VARIANT_SELECTOR &&
FT_Get_CMap_Format( cur[0] ) == 14 )
{
#ifdef FT_MAX_CHARMAP_CACHEABLE
if ( cur - first > FT_MAX_CHARMAP_CACHEABLE )
{
FT_ERROR(( "find_unicode_charmap: UVS cmap is found "
"at too late position (%d)\n", cur - first ));
continue;
}
#endif
return cur[0];
}
}
return NULL;
}
/*************************************************************************/
/* */
/* <Function> */
/* open_face */
/* */
/* <Description> */
/* This function does some work for FT_Open_Face(). */
/* */
static FT_Error
open_face( FT_Driver driver,
FT_Stream stream,
FT_Long face_index,
FT_Int num_params,
FT_Parameter* params,
FT_Face *aface )
{
FT_Memory memory;
FT_Driver_Class clazz;
FT_Face face = 0;
FT_Error error, error2;
FT_Face_Internal internal = NULL;
clazz = driver->clazz;
memory = driver->root.memory;
/* allocate the face object and perform basic initialization */
if ( FT_ALLOC( face, clazz->face_object_size ) )
goto Fail;
if ( FT_NEW( internal ) )
goto Fail;
face->internal = internal;
face->driver = driver;
face->memory = memory;
face->stream = stream;
{
int i;
face->internal->incremental_interface = 0;
for ( i = 0; i < num_params && !face->internal->incremental_interface;
i++ )
if ( params[i].tag == FT_PARAM_TAG_INCREMENTAL )
face->internal->incremental_interface =
(FT_Incremental_Interface)params[i].data;
}
if ( clazz->init_face )
error = clazz->init_face( stream,
face,
(FT_Int)face_index,
num_params,
params );
if ( error )
goto Fail;
/* select Unicode charmap by default */
error2 = find_unicode_charmap( face );
/* if no Unicode charmap can be found, FT_Err_Invalid_CharMap_Handle */
/* is returned. */
/* no error should happen, but we want to play safe */
if ( error2 && error2 != FT_Err_Invalid_CharMap_Handle )
{
error = error2;
goto Fail;
}
*aface = face;
Fail:
if ( error )
{
destroy_charmaps( face, memory );
if ( clazz->done_face )
clazz->done_face( face );
FT_FREE( internal );
FT_FREE( face );
*aface = 0;
}
return error;
}
/* there's a Mac-specific extended implementation of FT_New_Face() */
/* in src/base/ftmac.c */
#ifndef FT_MACINTOSH
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_New_Face( FT_Library library,
const char* pathname,
FT_Long face_index,
FT_Face *aface )
{
FT_Open_Args args;
/* test for valid `library' and `aface' delayed to FT_Open_Face() */
if ( !pathname )
return FT_Err_Invalid_Argument;
args.flags = FT_OPEN_PATHNAME;
args.pathname = (char*)pathname;
args.stream = NULL;
return FT_Open_Face( library, &args, face_index, aface );
}
#endif
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_New_Memory_Face( FT_Library library,
const FT_Byte* file_base,
FT_Long file_size,
FT_Long face_index,
FT_Face *aface )
{
FT_Open_Args args;
/* test for valid `library' and `face' delayed to FT_Open_Face() */
if ( !file_base )
return FT_Err_Invalid_Argument;
args.flags = FT_OPEN_MEMORY;
args.memory_base = file_base;
args.memory_size = file_size;
args.stream = NULL;
return FT_Open_Face( library, &args, face_index, aface );
}
/* The behavior here is very similar to that in base/ftmac.c, but it */
/* is designed to work on non-mac systems, so no mac specific calls. */
/* */
/* We look at the file and determine if it is a mac dfont file or a mac */
/* resource file, or a macbinary file containing a mac resource file. */
/* */
/* Unlike ftmac I'm not going to look at a `FOND'. I don't really see */
/* the point, especially since there may be multiple `FOND' resources. */
/* Instead I'll just look for `sfnt' and `POST' resources, ordered as */
/* they occur in the file. */
/* */
/* Note that multiple `POST' resources do not mean multiple postscript */
/* fonts; they all get jammed together to make what is essentially a */
/* pfb file. */
/* */
/* We aren't interested in `NFNT' or `FONT' bitmap resources. */
/* */
/* As soon as we get an `sfnt' load it into memory and pass it off to */
/* FT_Open_Face. */
/* */
/* If we have a (set of) `POST' resources, massage them into a (memory) */
/* pfb file and pass that to FT_Open_Face. (As with ftmac.c I'm not */
/* going to try to save the kerning info. After all that lives in the */
/* `FOND' which isn't in the file containing the `POST' resources so */
/* we don't really have access to it. */
/* Finalizer for a memory stream; gets called by FT_Done_Face(). */
/* It frees the memory it uses. */
/* From ftmac.c. */
static void
memory_stream_close( FT_Stream stream )
{
FT_Memory memory = stream->memory;
FT_FREE( stream->base );
stream->size = 0;
stream->base = 0;
stream->close = 0;
}
/* Create a new memory stream from a buffer and a size. */
/* From ftmac.c. */
static FT_Error
new_memory_stream( FT_Library library,
FT_Byte* base,
FT_ULong size,
FT_Stream_CloseFunc close,
FT_Stream *astream )
{
FT_Error error;
FT_Memory memory;
FT_Stream stream = NULL;
if ( !library )
return FT_Err_Invalid_Library_Handle;
if ( !base )
return FT_Err_Invalid_Argument;
*astream = 0;
memory = library->memory;
if ( FT_NEW( stream ) )
goto Exit;
FT_Stream_OpenMemory( stream, base, size );
stream->close = close;
*astream = stream;
Exit:
return error;
}
/* Create a new FT_Face given a buffer and a driver name. */
/* from ftmac.c */
FT_LOCAL_DEF( FT_Error )
open_face_from_buffer( FT_Library library,
FT_Byte* base,
FT_ULong size,
FT_Long face_index,
const char* driver_name,
FT_Face *aface )
{
FT_Open_Args args;
FT_Error error;
FT_Stream stream = NULL;
FT_Memory memory = library->memory;
error = new_memory_stream( library,
base,
size,
memory_stream_close,
&stream );
if ( error )
{
FT_FREE( base );
return error;
}
args.flags = FT_OPEN_STREAM;
args.stream = stream;
if ( driver_name )
{
args.flags = args.flags | FT_OPEN_DRIVER;
args.driver = FT_Get_Module( library, driver_name );
}
#ifdef FT_MACINTOSH
/* At this point, face_index has served its purpose; */
/* whoever calls this function has already used it to */
/* locate the correct font data. We should not propagate */
/* this index to FT_Open_Face() (unless it is negative). */
if ( face_index > 0 )
face_index = 0;
#endif
error = FT_Open_Face( library, &args, face_index, aface );
if ( error == FT_Err_Ok )
(*aface)->face_flags &= ~FT_FACE_FLAG_EXTERNAL_STREAM;
else
#ifdef FT_MACINTOSH
FT_Stream_Free( stream, 0 );
#else
{
FT_Stream_Close( stream );
FT_FREE( stream );
}
#endif
return error;
}
/* Look up `TYP1' or `CID ' table from sfnt table directory. */
/* `offset' and `length' must exclude the binary header in tables. */
/* Type 1 and CID-keyed font drivers should recognize sfnt-wrapped */
/* format too. Here, since we can't expect that the TrueType font */
/* driver is loaded unconditially, we must parse the font by */
/* ourselves. We are only interested in the name of the table and */
/* the offset. */
static FT_Error
ft_lookup_PS_in_sfnt_stream( FT_Stream stream,
FT_Long face_index,
FT_ULong* offset,
FT_ULong* length,
FT_Bool* is_sfnt_cid )
{
FT_Error error;
FT_UShort numTables;
FT_Long pstable_index;
FT_ULong tag;
int i;
*offset = 0;
*length = 0;
*is_sfnt_cid = FALSE;
/* TODO: support for sfnt-wrapped PS/CID in TTC format */
/* version check for 'typ1' (should be ignored?) */
if ( FT_READ_ULONG( tag ) )
return error;
if ( tag != TTAG_typ1 )
return FT_Err_Unknown_File_Format;
if ( FT_READ_USHORT( numTables ) )
return error;
/* skip binary search header */
if ( FT_STREAM_SKIP( 2 * 3 ) )
return error;
pstable_index = -1;
*is_sfnt_cid = FALSE;
for ( i = 0; i < numTables; i++ )
{
if ( FT_READ_ULONG( tag ) || FT_STREAM_SKIP( 4 ) ||
FT_READ_ULONG( *offset ) || FT_READ_ULONG( *length ) )
return error;
if ( tag == TTAG_CID )
{
pstable_index++;
*offset += 22;
*length -= 22;
*is_sfnt_cid = TRUE;
if ( face_index < 0 )
return FT_Err_Ok;
}
else if ( tag == TTAG_TYP1 )
{
pstable_index++;
*offset += 24;
*length -= 24;
*is_sfnt_cid = FALSE;
if ( face_index < 0 )
return FT_Err_Ok;
}
if ( face_index >= 0 && pstable_index == face_index )
return FT_Err_Ok;
}
return FT_Err_Table_Missing;
}
FT_LOCAL_DEF( FT_Error )
open_face_PS_from_sfnt_stream( FT_Library library,
FT_Stream stream,
FT_Long face_index,
FT_Int num_params,
FT_Parameter *params,
FT_Face *aface )
{
FT_Error error;
FT_Memory memory = library->memory;
FT_ULong offset, length;
FT_Long pos;
FT_Bool is_sfnt_cid;
FT_Byte* sfnt_ps = NULL;
FT_UNUSED( num_params );
FT_UNUSED( params );
pos = FT_Stream_Pos( stream );
error = ft_lookup_PS_in_sfnt_stream( stream,
face_index,
&offset,
&length,
&is_sfnt_cid );
if ( error )
goto Exit;
if ( FT_Stream_Seek( stream, pos + offset ) )
goto Exit;
if ( FT_ALLOC( sfnt_ps, (FT_Long)length ) )
goto Exit;
error = FT_Stream_Read( stream, (FT_Byte *)sfnt_ps, length );
if ( error )
goto Exit;
error = open_face_from_buffer( library,
sfnt_ps,
length,
face_index < 0 ? face_index : 0,
is_sfnt_cid ? "cid" : "type1",
aface );
Exit:
{
FT_Error error1;
if ( error == FT_Err_Unknown_File_Format )
{
error1 = FT_Stream_Seek( stream, pos );
if ( error1 )
return error1;
}
return error;
}
}
#ifndef FT_MACINTOSH
/* The resource header says we've got resource_cnt `POST' (type1) */
/* resources in this file. They all need to be coalesced into */
/* one lump which gets passed on to the type1 driver. */
/* Here can be only one PostScript font in a file so face_index */
/* must be 0 (or -1). */
/* */
static FT_Error
Mac_Read_POST_Resource( FT_Library library,
FT_Stream stream,
FT_Long *offsets,
FT_Long resource_cnt,
FT_Long face_index,
FT_Face *aface )
{
FT_Error error = FT_Err_Cannot_Open_Resource;
FT_Memory memory = library->memory;
FT_Byte* pfb_data = NULL;
int i, type, flags;
FT_Long len;
FT_Long pfb_len, pfb_pos, pfb_lenpos;
FT_Long rlen, temp;
if ( face_index == -1 )
face_index = 0;
if ( face_index != 0 )
return error;
/* Find the length of all the POST resources, concatenated. Assume */
/* worst case (each resource in its own section). */
pfb_len = 0;
for ( i = 0; i < resource_cnt; ++i )
{
error = FT_Stream_Seek( stream, offsets[i] );
if ( error )
goto Exit;
if ( FT_READ_LONG( temp ) )
goto Exit;
pfb_len += temp + 6;
}
if ( FT_ALLOC( pfb_data, (FT_Long)pfb_len + 2 ) )
goto Exit;
pfb_data[0] = 0x80;
/* Ascii section */
pfb_data[1] = 1;
/* 4-byte length, fill in later */
pfb_data[2] = 0;
pfb_data[3] = 0;
pfb_data[4] = 0;
pfb_data[5] = 0;
pfb_pos = 6;
pfb_lenpos = 2;
len = 0;
type = 1;
for ( i = 0; i < resource_cnt; ++i )
{
error = FT_Stream_Seek( stream, offsets[i] );
if ( error )
goto Exit2;
if ( FT_READ_LONG( rlen ) )
goto Exit;
if ( FT_READ_USHORT( flags ) )
goto Exit;
FT_TRACE3(( "POST fragment[%d]: offsets=0x%08x, rlen=0x%08x, flags=0x%04x\n",
i, offsets[i], rlen, flags ));
/* postpone the check of rlen longer than buffer until FT_Stream_Read() */
/* Comment, should not be loaded */
if ( ( flags >> 8 ) == 0 )
continue;
/* the flags are part of the resource, so rlen >= 2. */
/* but some fonts declare rlen = 0 for empty fragment */
if ( rlen > 2 )
rlen -= 2;
else
rlen = 0;
if ( ( flags >> 8 ) == type )
len += rlen;
else
{
if ( pfb_lenpos + 3 > pfb_len + 2 )
goto Exit2;
pfb_data[pfb_lenpos ] = (FT_Byte)( len );
pfb_data[pfb_lenpos + 1] = (FT_Byte)( len >> 8 );
pfb_data[pfb_lenpos + 2] = (FT_Byte)( len >> 16 );
pfb_data[pfb_lenpos + 3] = (FT_Byte)( len >> 24 );
/* End of font mark */
if ( ( flags >> 8 ) == 5 )
break;
if ( pfb_pos + 6 > pfb_len + 2 )
goto Exit2;
pfb_data[pfb_pos++] = 0x80;
type = flags >> 8;
len = rlen;
pfb_data[pfb_pos++] = (FT_Byte)type;
pfb_lenpos = pfb_pos;
/* 4-byte length, fill in later */
pfb_data[pfb_pos++] = 0;
pfb_data[pfb_pos++] = 0;
pfb_data[pfb_pos++] = 0;
pfb_data[pfb_pos++] = 0;
}
error = FT_Err_Cannot_Open_Resource;
if ( pfb_pos > pfb_len || pfb_pos + rlen > pfb_len )
goto Exit2;
error = FT_Stream_Read( stream, (FT_Byte *)pfb_data + pfb_pos, rlen );
if ( error )
goto Exit2;
pfb_pos += rlen;
}
if ( pfb_pos + 2 > pfb_len + 2 )
goto Exit2;
pfb_data[pfb_pos++] = 0x80;
pfb_data[pfb_pos++] = 3;
if ( pfb_lenpos + 3 > pfb_len + 2 )
goto Exit2;
pfb_data[pfb_lenpos ] = (FT_Byte)( len );
pfb_data[pfb_lenpos + 1] = (FT_Byte)( len >> 8 );
pfb_data[pfb_lenpos + 2] = (FT_Byte)( len >> 16 );
pfb_data[pfb_lenpos + 3] = (FT_Byte)( len >> 24 );
return open_face_from_buffer( library,
pfb_data,
pfb_pos,
face_index,
"type1",
aface );
Exit2:
FT_FREE( pfb_data );
Exit:
return error;
}
/* The resource header says we've got resource_cnt `sfnt' */
/* (TrueType/OpenType) resources in this file. Look through */
/* them for the one indicated by face_index, load it into mem, */
/* pass it on the the truetype driver and return it. */
/* */
static FT_Error
Mac_Read_sfnt_Resource( FT_Library library,
FT_Stream stream,
FT_Long *offsets,
FT_Long resource_cnt,
FT_Long face_index,
FT_Face *aface )
{
FT_Memory memory = library->memory;
FT_Byte* sfnt_data = NULL;
FT_Error error;
FT_Long flag_offset;
FT_Long rlen;
int is_cff;
FT_Long face_index_in_resource = 0;
if ( face_index == -1 )
face_index = 0;
if ( face_index >= resource_cnt )
return FT_Err_Cannot_Open_Resource;
flag_offset = offsets[face_index];
error = FT_Stream_Seek( stream, flag_offset );
if ( error )
goto Exit;
if ( FT_READ_LONG( rlen ) )
goto Exit;
if ( rlen == -1 )
return FT_Err_Cannot_Open_Resource;
error = open_face_PS_from_sfnt_stream( library,
stream,
face_index,
0, NULL,
aface );
if ( !error )
goto Exit;
/* rewind sfnt stream before open_face_PS_from_sfnt_stream() */
if ( FT_Stream_Seek( stream, flag_offset + 4 ) )
goto Exit;
if ( FT_ALLOC( sfnt_data, (FT_Long)rlen ) )
return error;
error = FT_Stream_Read( stream, (FT_Byte *)sfnt_data, rlen );
if ( error )
goto Exit;
is_cff = rlen > 4 && !ft_memcmp( sfnt_data, "OTTO", 4 );
error = open_face_from_buffer( library,
sfnt_data,
rlen,
face_index_in_resource,
is_cff ? "cff" : "truetype",
aface );
Exit:
return error;
}
/* Check for a valid resource fork header, or a valid dfont */
/* header. In a resource fork the first 16 bytes are repeated */
/* at the location specified by bytes 4-7. In a dfont bytes */
/* 4-7 point to 16 bytes of zeroes instead. */
/* */
static FT_Error
IsMacResource( FT_Library library,
FT_Stream stream,
FT_Long resource_offset,
FT_Long face_index,
FT_Face *aface )
{
FT_Memory memory = library->memory;
FT_Error error;
FT_Long map_offset, rdara_pos;
FT_Long *data_offsets;
FT_Long count;
error = FT_Raccess_Get_HeaderInfo( library, stream, resource_offset,
&map_offset, &rdara_pos );
if ( error )
return error;
error = FT_Raccess_Get_DataOffsets( library, stream,
map_offset, rdara_pos,
TTAG_POST,
&data_offsets, &count );
if ( !error )
{
error = Mac_Read_POST_Resource( library, stream, data_offsets, count,
face_index, aface );
FT_FREE( data_offsets );
/* POST exists in an LWFN providing a single face */
if ( !error )
(*aface)->num_faces = 1;
return error;
}
error = FT_Raccess_Get_DataOffsets( library, stream,
map_offset, rdara_pos,
TTAG_sfnt,
&data_offsets, &count );
if ( !error )
{
FT_Long face_index_internal = face_index % count;
error = Mac_Read_sfnt_Resource( library, stream, data_offsets, count,
face_index_internal, aface );
FT_FREE( data_offsets );
if ( !error )
(*aface)->num_faces = count;
}
return error;
}
/* Check for a valid macbinary header, and if we find one */
/* check that the (flattened) resource fork in it is valid. */
/* */
static FT_Error
IsMacBinary( FT_Library library,
FT_Stream stream,
FT_Long face_index,
FT_Face *aface )
{
unsigned char header[128];
FT_Error error;
FT_Long dlen, offset;
if ( NULL == stream )
return FT_Err_Invalid_Stream_Operation;
error = FT_Stream_Seek( stream, 0 );
if ( error )
goto Exit;
error = FT_Stream_Read( stream, (FT_Byte*)header, 128 );
if ( error )
goto Exit;
if ( header[ 0] != 0 ||
header[74] != 0 ||
header[82] != 0 ||
header[ 1] == 0 ||
header[ 1] > 33 ||
header[63] != 0 ||
header[2 + header[1]] != 0 )
return FT_Err_Unknown_File_Format;
dlen = ( header[0x53] << 24 ) |
( header[0x54] << 16 ) |
( header[0x55] << 8 ) |
header[0x56];
#if 0
rlen = ( header[0x57] << 24 ) |
( header[0x58] << 16 ) |
( header[0x59] << 8 ) |
header[0x5a];
/* 0 */
#endif
offset = 128 + ( ( dlen + 127 ) & ~127 );
return IsMacResource( library, stream, offset, face_index, aface );
Exit:
return error;
}
static FT_Error
load_face_in_embedded_rfork( FT_Library library,
FT_Stream stream,
FT_Long face_index,
FT_Face *aface,
const FT_Open_Args *args )
{
#undef FT_COMPONENT
#define FT_COMPONENT trace_raccess
FT_Memory memory = library->memory;
FT_Error error = FT_Err_Unknown_File_Format;
int i;
char * file_names[FT_RACCESS_N_RULES];
FT_Long offsets[FT_RACCESS_N_RULES];
FT_Error errors[FT_RACCESS_N_RULES];
/* not tested */
FT_Bool is_darwin_vfs, vfs_rfork_has_no_font = FALSE;
FT_Open_Args args2;
FT_Stream stream2 = 0;
FT_Raccess_Guess( library, stream,
args->pathname, file_names, offsets, errors );
for ( i = 0; i < FT_RACCESS_N_RULES; i++ )
{
is_darwin_vfs = ft_raccess_rule_by_darwin_vfs( library, i );
if ( is_darwin_vfs && vfs_rfork_has_no_font )
{
FT_TRACE3(( "Skip rule %d: darwin vfs resource fork"
" is already checked and"
" no font is found\n", i ));
continue;
}
if ( errors[i] )
{
FT_TRACE3(( "Error[%d] has occurred in rule %d\n", errors[i], i ));
continue;
}
args2.flags = FT_OPEN_PATHNAME;
args2.pathname = file_names[i] ? file_names[i] : args->pathname;
FT_TRACE3(( "Try rule %d: %s (offset=%d) ...",
i, args2.pathname, offsets[i] ));
error = FT_Stream_New( library, &args2, &stream2 );
if ( is_darwin_vfs && error == FT_Err_Cannot_Open_Stream )
vfs_rfork_has_no_font = TRUE;
if ( error )
{
FT_TRACE3(( "failed\n" ));
continue;
}
error = IsMacResource( library, stream2, offsets[i],
face_index, aface );
FT_Stream_Free( stream2, 0 );
FT_TRACE3(( "%s\n", error ? "failed": "successful" ));
if ( !error )
break;
else if ( is_darwin_vfs )
vfs_rfork_has_no_font = TRUE;
}
for (i = 0; i < FT_RACCESS_N_RULES; i++)
{
if ( file_names[i] )
FT_FREE( file_names[i] );
}
/* Caller (load_mac_face) requires FT_Err_Unknown_File_Format. */
if ( error )
error = FT_Err_Unknown_File_Format;
return error;
#undef FT_COMPONENT
#define FT_COMPONENT trace_objs
}
/* Check for some macintosh formats without Carbon framework. */
/* Is this a macbinary file? If so look at the resource fork. */
/* Is this a mac dfont file? */
/* Is this an old style resource fork? (in data) */
/* Else call load_face_in_embedded_rfork to try extra rules */
/* (defined in `ftrfork.c'). */
/* */
static FT_Error
load_mac_face( FT_Library library,
FT_Stream stream,
FT_Long face_index,
FT_Face *aface,
const FT_Open_Args *args )
{
FT_Error error;
FT_UNUSED( args );
error = IsMacBinary( library, stream, face_index, aface );
if ( FT_ERROR_BASE( error ) == FT_Err_Unknown_File_Format )
{
#undef FT_COMPONENT
#define FT_COMPONENT trace_raccess
FT_TRACE3(( "Try as dfont: %s ...", args->pathname ));
error = IsMacResource( library, stream, 0, face_index, aface );
FT_TRACE3(( "%s\n", error ? "failed" : "successful" ));
#undef FT_COMPONENT
#define FT_COMPONENT trace_objs
}
if ( ( FT_ERROR_BASE( error ) == FT_Err_Unknown_File_Format ||
FT_ERROR_BASE( error ) == FT_Err_Invalid_Stream_Operation ) &&
( args->flags & FT_OPEN_PATHNAME ) )
error = load_face_in_embedded_rfork( library, stream,
face_index, aface, args );
return error;
}
#endif
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Open_Face( FT_Library library,
const FT_Open_Args* args,
FT_Long face_index,
FT_Face *aface )
{
FT_Error error;
FT_Driver driver;
FT_Memory memory;
FT_Stream stream = NULL;
FT_Face face = NULL;
FT_ListNode node = NULL;
FT_Bool external_stream;
FT_Module* cur;
FT_Module* limit;
/* test for valid `library' delayed to */
/* FT_Stream_New() */
if ( ( !aface && face_index >= 0 ) || !args )
return FT_Err_Invalid_Argument;
external_stream = FT_BOOL( ( args->flags & FT_OPEN_STREAM ) &&
args->stream );
/* create input stream */
error = FT_Stream_New( library, args, &stream );
if ( error )
goto Fail3;
memory = library->memory;
/* If the font driver is specified in the `args' structure, use */
/* it. Otherwise, we scan the list of registered drivers. */
if ( ( args->flags & FT_OPEN_DRIVER ) && args->driver )
{
driver = FT_DRIVER( args->driver );
/* not all modules are drivers, so check... */
if ( FT_MODULE_IS_DRIVER( driver ) )
{
FT_Int num_params = 0;
FT_Parameter* params = 0;
if ( args->flags & FT_OPEN_PARAMS )
{
num_params = args->num_params;
params = args->params;
}
error = open_face( driver, stream, face_index,
num_params, params, &face );
if ( !error )
goto Success;
}
else
error = FT_Err_Invalid_Handle;
FT_Stream_Free( stream, external_stream );
goto Fail;
}
else
{
error = FT_Err_Missing_Module;
/* check each font driver for an appropriate format */
cur = library->modules;
limit = cur + library->num_modules;
for ( ; cur < limit; cur++ )
{
/* not all modules are font drivers, so check... */
if ( FT_MODULE_IS_DRIVER( cur[0] ) )
{
FT_Int num_params = 0;
FT_Parameter* params = 0;
driver = FT_DRIVER( cur[0] );
if ( args->flags & FT_OPEN_PARAMS )
{
num_params = args->num_params;
params = args->params;
}
error = open_face( driver, stream, face_index,
num_params, params, &face );
if ( !error )
goto Success;
if ( ft_strcmp( cur[0]->clazz->module_name, "truetype" ) == 0 &&
FT_ERROR_BASE( error ) == FT_Err_Table_Missing )
{
/* TrueType but essential tables are missing */
if ( FT_Stream_Seek( stream, 0 ) )
break;
error = open_face_PS_from_sfnt_stream( library,
stream,
face_index,
num_params,
params,
aface );
if ( !error )
{
FT_Stream_Free( stream, external_stream );
return error;
}
}
if ( FT_ERROR_BASE( error ) != FT_Err_Unknown_File_Format )
goto Fail3;
}
}
Fail3:
/* If we are on the mac, and we get an */
/* FT_Err_Invalid_Stream_Operation it may be because we have an */
/* empty data fork, so we need to check the resource fork. */
if ( FT_ERROR_BASE( error ) != FT_Err_Cannot_Open_Stream &&
FT_ERROR_BASE( error ) != FT_Err_Unknown_File_Format &&
FT_ERROR_BASE( error ) != FT_Err_Invalid_Stream_Operation )
goto Fail2;
#if !defined( FT_MACINTOSH ) && defined( FT_CONFIG_OPTION_MAC_FONTS )
error = load_mac_face( library, stream, face_index, aface, args );
if ( !error )
{
/* We don't want to go to Success here. We've already done that. */
/* On the other hand, if we succeeded we still need to close this */
/* stream (we opened a different stream which extracted the */
/* interesting information out of this stream here. That stream */
/* will still be open and the face will point to it). */
FT_Stream_Free( stream, external_stream );
return error;
}
if ( FT_ERROR_BASE( error ) != FT_Err_Unknown_File_Format )
goto Fail2;
/* !FT_MACINTOSH && FT_CONFIG_OPTION_MAC_FONTS */
#endif
/* no driver is able to handle this format */
error = FT_Err_Unknown_File_Format;
Fail2:
FT_Stream_Free( stream, external_stream );
goto Fail;
}
Success:
FT_TRACE4(( "FT_Open_Face: New face object, adding to list\n" ));
/* set the FT_FACE_FLAG_EXTERNAL_STREAM bit for FT_Done_Face */
if ( external_stream )
face->face_flags |= FT_FACE_FLAG_EXTERNAL_STREAM;
/* add the face object to its driver's list */
if ( FT_NEW( node ) )
goto Fail;
node->data = face;
/* don't assume driver is the same as face->driver, so use */
/* face->driver instead. */
FT_List_Add( &face->driver->faces_list, node );
/* now allocate a glyph slot object for the face */
FT_TRACE4(( "FT_Open_Face: Creating glyph slot\n" ));
if ( face_index >= 0 )
{
error = FT_New_GlyphSlot( face, NULL );
if ( error )
goto Fail;
/* finally, allocate a size object for the face */
{
FT_Size size;
FT_TRACE4(( "FT_Open_Face: Creating size object\n" ));
error = FT_New_Size( face, &size );
if ( error )
goto Fail;
face->size = size;
}
}
/* some checks */
if ( FT_IS_SCALABLE( face ) )
{
if ( face->height < 0 )
face->height = (FT_Short)-face->height;
if ( !FT_HAS_VERTICAL( face ) )
face->max_advance_height = (FT_Short)face->height;
}
if ( FT_HAS_FIXED_SIZES( face ) )
{
FT_Int i;
for ( i = 0; i < face->num_fixed_sizes; i++ )
{
FT_Bitmap_Size* bsize = face->available_sizes + i;
if ( bsize->height < 0 )
bsize->height = (FT_Short)-bsize->height;
if ( bsize->x_ppem < 0 )
bsize->x_ppem = (FT_Short)-bsize->x_ppem;
if ( bsize->y_ppem < 0 )
bsize->y_ppem = -bsize->y_ppem;
}
}
/* initialize internal face data */
{
FT_Face_Internal internal = face->internal;
internal->transform_matrix.xx = 0x10000L;
internal->transform_matrix.xy = 0;
internal->transform_matrix.yx = 0;
internal->transform_matrix.yy = 0x10000L;
internal->transform_delta.x = 0;
internal->transform_delta.y = 0;
internal->refcount = 1;
}
if ( aface )
*aface = face;
else
FT_Done_Face( face );
goto Exit;
Fail:
FT_Done_Face( face );
Exit:
FT_TRACE4(( "FT_Open_Face: Return %d\n", error ));
return error;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Attach_File( FT_Face face,
const char* filepathname )
{
FT_Open_Args open;
/* test for valid `face' delayed to FT_Attach_Stream() */
if ( !filepathname )
return FT_Err_Invalid_Argument;
open.stream = NULL;
open.flags = FT_OPEN_PATHNAME;
open.pathname = (char*)filepathname;
return FT_Attach_Stream( face, &open );
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Attach_Stream( FT_Face face,
FT_Open_Args* parameters )
{
FT_Stream stream;
FT_Error error;
FT_Driver driver;
FT_Driver_Class clazz;
/* test for valid `parameters' delayed to FT_Stream_New() */
if ( !face )
return FT_Err_Invalid_Face_Handle;
driver = face->driver;
if ( !driver )
return FT_Err_Invalid_Driver_Handle;
error = FT_Stream_New( driver->root.library, parameters, &stream );
if ( error )
goto Exit;
/* we implement FT_Attach_Stream in each driver through the */
/* `attach_file' interface */
error = FT_Err_Unimplemented_Feature;
clazz = driver->clazz;
if ( clazz->attach_file )
error = clazz->attach_file( face, stream );
/* close the attached stream */
FT_Stream_Free( stream,
(FT_Bool)( parameters->stream &&
( parameters->flags & FT_OPEN_STREAM ) ) );
Exit:
return error;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Reference_Face( FT_Face face )
{
face->internal->refcount++;
return FT_Err_Ok;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Done_Face( FT_Face face )
{
FT_Error error;
FT_Driver driver;
FT_Memory memory;
FT_ListNode node;
error = FT_Err_Invalid_Face_Handle;
if ( face && face->driver )
{
face->internal->refcount--;
if ( face->internal->refcount > 0 )
error = FT_Err_Ok;
else
{
driver = face->driver;
memory = driver->root.memory;
/* find face in driver's list */
node = FT_List_Find( &driver->faces_list, face );
if ( node )
{
/* remove face object from the driver's list */
FT_List_Remove( &driver->faces_list, node );
FT_FREE( node );
/* now destroy the object proper */
destroy_face( memory, face, driver );
error = FT_Err_Ok;
}
}
}
return error;
}
/* documentation is in ftobjs.h */
FT_EXPORT_DEF( FT_Error )
FT_New_Size( FT_Face face,
FT_Size *asize )
{
FT_Error error;
FT_Memory memory;
FT_Driver driver;
FT_Driver_Class clazz;
FT_Size size = 0;
FT_ListNode node = 0;
if ( !face )
return FT_Err_Invalid_Face_Handle;
if ( !asize )
return FT_Err_Invalid_Size_Handle;
if ( !face->driver )
return FT_Err_Invalid_Driver_Handle;
*asize = 0;
driver = face->driver;
clazz = driver->clazz;
memory = face->memory;
/* Allocate new size object and perform basic initialisation */
if ( FT_ALLOC( size, clazz->size_object_size ) || FT_NEW( node ) )
goto Exit;
size->face = face;
/* for now, do not use any internal fields in size objects */
size->internal = 0;
if ( clazz->init_size )
error = clazz->init_size( size );
/* in case of success, add to the face's list */
if ( !error )
{
*asize = size;
node->data = size;
FT_List_Add( &face->sizes_list, node );
}
Exit:
if ( error )
{
FT_FREE( node );
FT_FREE( size );
}
return error;
}
/* documentation is in ftobjs.h */
FT_EXPORT_DEF( FT_Error )
FT_Done_Size( FT_Size size )
{
FT_Error error;
FT_Driver driver;
FT_Memory memory;
FT_Face face;
FT_ListNode node;
if ( !size )
return FT_Err_Invalid_Size_Handle;
face = size->face;
if ( !face )
return FT_Err_Invalid_Face_Handle;
driver = face->driver;
if ( !driver )
return FT_Err_Invalid_Driver_Handle;
memory = driver->root.memory;
error = FT_Err_Ok;
node = FT_List_Find( &face->sizes_list, size );
if ( node )
{
FT_List_Remove( &face->sizes_list, node );
FT_FREE( node );
if ( face->size == size )
{
face->size = 0;
if ( face->sizes_list.head )
face->size = (FT_Size)(face->sizes_list.head->data);
}
destroy_size( memory, size, driver );
}
else
error = FT_Err_Invalid_Size_Handle;
return error;
}
/* documentation is in ftobjs.h */
FT_BASE_DEF( FT_Error )
FT_Match_Size( FT_Face face,
FT_Size_Request req,
FT_Bool ignore_width,
FT_ULong* size_index )
{
FT_Int i;
FT_Long w, h;
if ( !FT_HAS_FIXED_SIZES( face ) )
return FT_Err_Invalid_Face_Handle;
/* FT_Bitmap_Size doesn't provide enough info... */
if ( req->type != FT_SIZE_REQUEST_TYPE_NOMINAL )
return FT_Err_Unimplemented_Feature;
w = FT_REQUEST_WIDTH ( req );
h = FT_REQUEST_HEIGHT( req );
if ( req->width && !req->height )
h = w;
else if ( !req->width && req->height )
w = h;
w = FT_PIX_ROUND( w );
h = FT_PIX_ROUND( h );
for ( i = 0; i < face->num_fixed_sizes; i++ )
{
FT_Bitmap_Size* bsize = face->available_sizes + i;
if ( h != FT_PIX_ROUND( bsize->y_ppem ) )
continue;
if ( w == FT_PIX_ROUND( bsize->x_ppem ) || ignore_width )
{
if ( size_index )
*size_index = (FT_ULong)i;
return FT_Err_Ok;
}
}
return FT_Err_Invalid_Pixel_Size;
}
/* documentation is in ftobjs.h */
FT_BASE_DEF( void )
ft_synthesize_vertical_metrics( FT_Glyph_Metrics* metrics,
FT_Pos advance )
{
FT_Pos height = metrics->height;
/* compensate for glyph with bbox above/below the baseline */
if ( metrics->horiBearingY < 0 )
{
if ( height < metrics->horiBearingY )
height = metrics->horiBearingY;
}
else if ( metrics->horiBearingY > 0 )
height -= metrics->horiBearingY;
/* the factor 1.2 is a heuristical value */
if ( !advance )
advance = height * 12 / 10;
metrics->vertBearingX = metrics->horiBearingX - metrics->horiAdvance / 2;
metrics->vertBearingY = ( advance - height ) / 2;
metrics->vertAdvance = advance;
}
static void
ft_recompute_scaled_metrics( FT_Face face,
FT_Size_Metrics* metrics )
{
/* Compute root ascender, descender, test height, and max_advance */
#ifdef GRID_FIT_METRICS
metrics->ascender = FT_PIX_CEIL( FT_MulFix( face->ascender,
metrics->y_scale ) );
metrics->descender = FT_PIX_FLOOR( FT_MulFix( face->descender,
metrics->y_scale ) );
metrics->height = FT_PIX_ROUND( FT_MulFix( face->height,
metrics->y_scale ) );
metrics->max_advance = FT_PIX_ROUND( FT_MulFix( face->max_advance_width,
metrics->x_scale ) );
/* !GRID_FIT_METRICS */
#else
metrics->ascender = FT_MulFix( face->ascender,
metrics->y_scale );
metrics->descender = FT_MulFix( face->descender,
metrics->y_scale );
metrics->height = FT_MulFix( face->height,
metrics->y_scale );
metrics->max_advance = FT_MulFix( face->max_advance_width,
metrics->x_scale );
/* !GRID_FIT_METRICS */
#endif
}
FT_BASE_DEF( void )
FT_Select_Metrics( FT_Face face,
FT_ULong strike_index )
{
FT_Size_Metrics* metrics;
FT_Bitmap_Size* bsize;
metrics = &face->size->metrics;
bsize = face->available_sizes + strike_index;
metrics->x_ppem = (FT_UShort)( ( bsize->x_ppem + 32 ) >> 6 );
metrics->y_ppem = (FT_UShort)( ( bsize->y_ppem + 32 ) >> 6 );
if ( FT_IS_SCALABLE( face ) )
{
metrics->x_scale = FT_DivFix( bsize->x_ppem,
face->units_per_EM );
metrics->y_scale = FT_DivFix( bsize->y_ppem,
face->units_per_EM );
ft_recompute_scaled_metrics( face, metrics );
}
else
{
metrics->x_scale = 1L << 16;
metrics->y_scale = 1L << 16;
metrics->ascender = bsize->y_ppem;
metrics->descender = 0;
metrics->height = bsize->height << 6;
metrics->max_advance = bsize->x_ppem;
}
FT_TRACE5(( "FT_Select_Metrics:\n" ));
FT_TRACE5(( " x scale: %d (%f)\n",
metrics->x_scale, metrics->x_scale / 65536.0 ));
FT_TRACE5(( " y scale: %d (%f)\n",
metrics->y_scale, metrics->y_scale / 65536.0 ));
FT_TRACE5(( " ascender: %f\n", metrics->ascender / 64.0 ));
FT_TRACE5(( " descender: %f\n", metrics->descender / 64.0 ));
FT_TRACE5(( " height: %f\n", metrics->height / 64.0 ));
FT_TRACE5(( " max advance: %f\n", metrics->max_advance / 64.0 ));
FT_TRACE5(( " x ppem: %d\n", metrics->x_ppem ));
FT_TRACE5(( " y ppem: %d\n", metrics->y_ppem ));
}
FT_BASE_DEF( void )
FT_Request_Metrics( FT_Face face,
FT_Size_Request req )
{
FT_Size_Metrics* metrics;
metrics = &face->size->metrics;
if ( FT_IS_SCALABLE( face ) )
{
FT_Long w = 0, h = 0, scaled_w = 0, scaled_h = 0;
switch ( req->type )
{
case FT_SIZE_REQUEST_TYPE_NOMINAL:
w = h = face->units_per_EM;
break;
case FT_SIZE_REQUEST_TYPE_REAL_DIM:
w = h = face->ascender - face->descender;
break;
case FT_SIZE_REQUEST_TYPE_BBOX:
w = face->bbox.xMax - face->bbox.xMin;
h = face->bbox.yMax - face->bbox.yMin;
break;
case FT_SIZE_REQUEST_TYPE_CELL:
w = face->max_advance_width;
h = face->ascender - face->descender;
break;
case FT_SIZE_REQUEST_TYPE_SCALES:
metrics->x_scale = (FT_Fixed)req->width;
metrics->y_scale = (FT_Fixed)req->height;
if ( !metrics->x_scale )
metrics->x_scale = metrics->y_scale;
else if ( !metrics->y_scale )
metrics->y_scale = metrics->x_scale;
goto Calculate_Ppem;
case FT_SIZE_REQUEST_TYPE_MAX:
break;
}
/* to be on the safe side */
if ( w < 0 )
w = -w;
if ( h < 0 )
h = -h;
scaled_w = FT_REQUEST_WIDTH ( req );
scaled_h = FT_REQUEST_HEIGHT( req );
/* determine scales */
if ( req->width )
{
metrics->x_scale = FT_DivFix( scaled_w, w );
if ( req->height )
{
metrics->y_scale = FT_DivFix( scaled_h, h );
if ( req->type == FT_SIZE_REQUEST_TYPE_CELL )
{
if ( metrics->y_scale > metrics->x_scale )
metrics->y_scale = metrics->x_scale;
else
metrics->x_scale = metrics->y_scale;
}
}
else
{
metrics->y_scale = metrics->x_scale;
scaled_h = FT_MulDiv( scaled_w, h, w );
}
}
else
{
metrics->x_scale = metrics->y_scale = FT_DivFix( scaled_h, h );
scaled_w = FT_MulDiv( scaled_h, w, h );
}
Calculate_Ppem:
/* calculate the ppems */
if ( req->type != FT_SIZE_REQUEST_TYPE_NOMINAL )
{
scaled_w = FT_MulFix( face->units_per_EM, metrics->x_scale );
scaled_h = FT_MulFix( face->units_per_EM, metrics->y_scale );
}
metrics->x_ppem = (FT_UShort)( ( scaled_w + 32 ) >> 6 );
metrics->y_ppem = (FT_UShort)( ( scaled_h + 32 ) >> 6 );
ft_recompute_scaled_metrics( face, metrics );
}
else
{
FT_ZERO( metrics );
metrics->x_scale = 1L << 16;
metrics->y_scale = 1L << 16;
}
FT_TRACE5(( "FT_Request_Metrics:\n" ));
FT_TRACE5(( " x scale: %d (%f)\n",
metrics->x_scale, metrics->x_scale / 65536.0 ));
FT_TRACE5(( " y scale: %d (%f)\n",
metrics->y_scale, metrics->y_scale / 65536.0 ));
FT_TRACE5(( " ascender: %f\n", metrics->ascender / 64.0 ));
FT_TRACE5(( " descender: %f\n", metrics->descender / 64.0 ));
FT_TRACE5(( " height: %f\n", metrics->height / 64.0 ));
FT_TRACE5(( " max advance: %f\n", metrics->max_advance / 64.0 ));
FT_TRACE5(( " x ppem: %d\n", metrics->x_ppem ));
FT_TRACE5(( " y ppem: %d\n", metrics->y_ppem ));
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Select_Size( FT_Face face,
FT_Int strike_index )
{
FT_Driver_Class clazz;
if ( !face || !FT_HAS_FIXED_SIZES( face ) )
return FT_Err_Invalid_Face_Handle;
if ( strike_index < 0 || strike_index >= face->num_fixed_sizes )
return FT_Err_Invalid_Argument;
clazz = face->driver->clazz;
if ( clazz->select_size )
{
FT_Error error;
error = clazz->select_size( face->size, (FT_ULong)strike_index );
return error;
}
FT_Select_Metrics( face, (FT_ULong)strike_index );
return FT_Err_Ok;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Request_Size( FT_Face face,
FT_Size_Request req )
{
FT_Driver_Class clazz;
FT_ULong strike_index;
if ( !face )
return FT_Err_Invalid_Face_Handle;
if ( !req || req->width < 0 || req->height < 0 ||
req->type >= FT_SIZE_REQUEST_TYPE_MAX )
return FT_Err_Invalid_Argument;
clazz = face->driver->clazz;
if ( clazz->request_size )
{
FT_Error error;
error = clazz->request_size( face->size, req );
return error;
}
/*
* The reason that a driver doesn't have `request_size' defined is
* either that the scaling here suffices or that the supported formats
* are bitmap-only and size matching is not implemented.
*
* In the latter case, a simple size matching is done.
*/
if ( !FT_IS_SCALABLE( face ) && FT_HAS_FIXED_SIZES( face ) )
{
FT_Error error;
error = FT_Match_Size( face, req, 0, &strike_index );
if ( error )
return error;
FT_TRACE3(( "FT_Request_Size: bitmap strike %lu matched\n",
strike_index ));
return FT_Select_Size( face, (FT_Int)strike_index );
}
FT_Request_Metrics( face, req );
return FT_Err_Ok;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Set_Char_Size( FT_Face face,
FT_F26Dot6 char_width,
FT_F26Dot6 char_height,
FT_UInt horz_resolution,
FT_UInt vert_resolution )
{
FT_Size_RequestRec req;
if ( !char_width )
char_width = char_height;
else if ( !char_height )
char_height = char_width;
if ( !horz_resolution )
horz_resolution = vert_resolution;
else if ( !vert_resolution )
vert_resolution = horz_resolution;
if ( char_width < 1 * 64 )
char_width = 1 * 64;
if ( char_height < 1 * 64 )
char_height = 1 * 64;
if ( !horz_resolution )
horz_resolution = vert_resolution = 72;
req.type = FT_SIZE_REQUEST_TYPE_NOMINAL;
req.width = char_width;
req.height = char_height;
req.horiResolution = horz_resolution;
req.vertResolution = vert_resolution;
return FT_Request_Size( face, &req );
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Set_Pixel_Sizes( FT_Face face,
FT_UInt pixel_width,
FT_UInt pixel_height )
{
FT_Size_RequestRec req;
if ( pixel_width == 0 )
pixel_width = pixel_height;
else if ( pixel_height == 0 )
pixel_height = pixel_width;
if ( pixel_width < 1 )
pixel_width = 1;
if ( pixel_height < 1 )
pixel_height = 1;
/* use `>=' to avoid potential compiler warning on 16bit platforms */
if ( pixel_width >= 0xFFFFU )
pixel_width = 0xFFFFU;
if ( pixel_height >= 0xFFFFU )
pixel_height = 0xFFFFU;
req.type = FT_SIZE_REQUEST_TYPE_NOMINAL;
req.width = pixel_width << 6;
req.height = pixel_height << 6;
req.horiResolution = 0;
req.vertResolution = 0;
return FT_Request_Size( face, &req );
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_Kerning( FT_Face face,
FT_UInt left_glyph,
FT_UInt right_glyph,
FT_UInt kern_mode,
FT_Vector *akerning )
{
FT_Error error = FT_Err_Ok;
FT_Driver driver;
if ( !face )
return FT_Err_Invalid_Face_Handle;
if ( !akerning )
return FT_Err_Invalid_Argument;
driver = face->driver;
akerning->x = 0;
akerning->y = 0;
if ( driver->clazz->get_kerning )
{
error = driver->clazz->get_kerning( face,
left_glyph,
right_glyph,
akerning );
if ( !error )
{
if ( kern_mode != FT_KERNING_UNSCALED )
{
akerning->x = FT_MulFix( akerning->x, face->size->metrics.x_scale );
akerning->y = FT_MulFix( akerning->y, face->size->metrics.y_scale );
if ( kern_mode != FT_KERNING_UNFITTED )
{
/* we scale down kerning values for small ppem values */
/* to avoid that rounding makes them too big. */
/* `25' has been determined heuristically. */
if ( face->size->metrics.x_ppem < 25 )
akerning->x = FT_MulDiv( akerning->x,
face->size->metrics.x_ppem, 25 );
if ( face->size->metrics.y_ppem < 25 )
akerning->y = FT_MulDiv( akerning->y,
face->size->metrics.y_ppem, 25 );
akerning->x = FT_PIX_ROUND( akerning->x );
akerning->y = FT_PIX_ROUND( akerning->y );
}
}
}
}
return error;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_Track_Kerning( FT_Face face,
FT_Fixed point_size,
FT_Int degree,
FT_Fixed* akerning )
{
FT_Service_Kerning service;
FT_Error error = FT_Err_Ok;
if ( !face )
return FT_Err_Invalid_Face_Handle;
if ( !akerning )
return FT_Err_Invalid_Argument;
FT_FACE_FIND_SERVICE( face, service, KERNING );
if ( !service )
return FT_Err_Unimplemented_Feature;
error = service->get_track( face,
point_size,
degree,
akerning );
return error;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Select_Charmap( FT_Face face,
FT_Encoding encoding )
{
FT_CharMap* cur;
FT_CharMap* limit;
if ( !face )
return FT_Err_Invalid_Face_Handle;
if ( encoding == FT_ENCODING_NONE )
return FT_Err_Invalid_Argument;
/* FT_ENCODING_UNICODE is special. We try to find the `best' Unicode */
/* charmap available, i.e., one with UCS-4 characters, if possible. */
/* */
/* This is done by find_unicode_charmap() above, to share code. */
if ( encoding == FT_ENCODING_UNICODE )
return find_unicode_charmap( face );
cur = face->charmaps;
if ( !cur )
return FT_Err_Invalid_CharMap_Handle;
limit = cur + face->num_charmaps;
for ( ; cur < limit; cur++ )
{
if ( cur[0]->encoding == encoding )
{
#ifdef FT_MAX_CHARMAP_CACHEABLE
if ( cur - face->charmaps > FT_MAX_CHARMAP_CACHEABLE )
{
FT_ERROR(( "FT_Select_Charmap: requested charmap is found (%d), "
"but in too late position to cache\n",
cur - face->charmaps ));
continue;
}
#endif
face->charmap = cur[0];
return 0;
}
}
return FT_Err_Invalid_Argument;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Set_Charmap( FT_Face face,
FT_CharMap charmap )
{
FT_CharMap* cur;
FT_CharMap* limit;
if ( !face )
return FT_Err_Invalid_Face_Handle;
cur = face->charmaps;
if ( !cur )
return FT_Err_Invalid_CharMap_Handle;
if ( FT_Get_CMap_Format( charmap ) == 14 )
return FT_Err_Invalid_Argument;
limit = cur + face->num_charmaps;
for ( ; cur < limit; cur++ )
{
if ( cur[0] == charmap )
{
#ifdef FT_MAX_CHARMAP_CACHEABLE
if ( cur - face->charmaps > FT_MAX_CHARMAP_CACHEABLE )
{
FT_ERROR(( "FT_Set_Charmap: requested charmap is found (%d), "
"but in too late position to cache\n",
cur - face->charmaps ));
continue;
}
#endif
face->charmap = cur[0];
return 0;
}
}
return FT_Err_Invalid_Argument;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Int )
FT_Get_Charmap_Index( FT_CharMap charmap )
{
FT_Int i;
if ( !charmap || !charmap->face )
return -1;
for ( i = 0; i < charmap->face->num_charmaps; i++ )
if ( charmap->face->charmaps[i] == charmap )
break;
FT_ASSERT( i < charmap->face->num_charmaps );
#ifdef FT_MAX_CHARMAP_CACHEABLE
if ( i > FT_MAX_CHARMAP_CACHEABLE )
{
FT_ERROR(( "FT_Get_Charmap_Index: requested charmap is found (%d), "
"but in too late position to cache\n",
i ));
return -i;
}
#endif
return i;
}
static void
ft_cmap_done_internal( FT_CMap cmap )
{
FT_CMap_Class clazz = cmap->clazz;
FT_Face face = cmap->charmap.face;
FT_Memory memory = FT_FACE_MEMORY(face);
if ( clazz->done )
clazz->done( cmap );
FT_FREE( cmap );
}
FT_BASE_DEF( void )
FT_CMap_Done( FT_CMap cmap )
{
if ( cmap )
{
FT_Face face = cmap->charmap.face;
FT_Memory memory = FT_FACE_MEMORY( face );
FT_Error error;
FT_Int i, j;
for ( i = 0; i < face->num_charmaps; i++ )
{
if ( (FT_CMap)face->charmaps[i] == cmap )
{
FT_CharMap last_charmap = face->charmaps[face->num_charmaps - 1];
if ( FT_RENEW_ARRAY( face->charmaps,
face->num_charmaps,
face->num_charmaps - 1 ) )
return;
/* remove it from our list of charmaps */
for ( j = i + 1; j < face->num_charmaps; j++ )
{
if ( j == face->num_charmaps - 1 )
face->charmaps[j - 1] = last_charmap;
else
face->charmaps[j - 1] = face->charmaps[j];
}
face->num_charmaps--;
if ( (FT_CMap)face->charmap == cmap )
face->charmap = NULL;
ft_cmap_done_internal( cmap );
break;
}
}
}
}
FT_BASE_DEF( FT_Error )
FT_CMap_New( FT_CMap_Class clazz,
FT_Pointer init_data,
FT_CharMap charmap,
FT_CMap *acmap )
{
FT_Error error = FT_Err_Ok;
FT_Face face;
FT_Memory memory;
FT_CMap cmap = NULL;
if ( clazz == NULL || charmap == NULL || charmap->face == NULL )
return FT_Err_Invalid_Argument;
face = charmap->face;
memory = FT_FACE_MEMORY( face );
if ( !FT_ALLOC( cmap, clazz->size ) )
{
cmap->charmap = *charmap;
cmap->clazz = clazz;
if ( clazz->init )
{
error = clazz->init( cmap, init_data );
if ( error )
goto Fail;
}
/* add it to our list of charmaps */
if ( FT_RENEW_ARRAY( face->charmaps,
face->num_charmaps,
face->num_charmaps + 1 ) )
goto Fail;
face->charmaps[face->num_charmaps++] = (FT_CharMap)cmap;
}
Exit:
if ( acmap )
*acmap = cmap;
return error;
Fail:
ft_cmap_done_internal( cmap );
cmap = NULL;
goto Exit;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_UInt )
FT_Get_Char_Index( FT_Face face,
FT_ULong charcode )
{
FT_UInt result = 0;
if ( face && face->charmap )
{
FT_CMap cmap = FT_CMAP( face->charmap );
if ( charcode > 0xFFFFFFFFUL )
{
FT_TRACE1(( "FT_Get_Char_Index: too large charcode" ));
FT_TRACE1(( " 0x%x is truncated\n", charcode ));
}
result = cmap->clazz->char_index( cmap, (FT_UInt32)charcode );
}
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_ULong )
FT_Get_First_Char( FT_Face face,
FT_UInt *agindex )
{
FT_ULong result = 0;
FT_UInt gindex = 0;
if ( face && face->charmap && face->num_glyphs )
{
gindex = FT_Get_Char_Index( face, 0 );
if ( gindex == 0 || gindex >= (FT_UInt)face->num_glyphs )
result = FT_Get_Next_Char( face, 0, &gindex );
}
if ( agindex )
*agindex = gindex;
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_ULong )
FT_Get_Next_Char( FT_Face face,
FT_ULong charcode,
FT_UInt *agindex )
{
FT_ULong result = 0;
FT_UInt gindex = 0;
if ( face && face->charmap && face->num_glyphs )
{
FT_UInt32 code = (FT_UInt32)charcode;
FT_CMap cmap = FT_CMAP( face->charmap );
do {
gindex = cmap->clazz->char_next( cmap, &code );
} while ( gindex >= (FT_UInt)face->num_glyphs );
result = ( gindex == 0 ) ? 0 : code;
}
if ( agindex )
*agindex = gindex;
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_UInt )
FT_Face_GetCharVariantIndex( FT_Face face,
FT_ULong charcode,
FT_ULong variantSelector )
{
FT_UInt result = 0;
if ( face && face->charmap &&
face->charmap->encoding == FT_ENCODING_UNICODE )
{
FT_CharMap charmap = find_variant_selector_charmap( face );
FT_CMap ucmap = FT_CMAP( face->charmap );
if ( charmap != NULL )
{
FT_CMap vcmap = FT_CMAP( charmap );
if ( charcode > 0xFFFFFFFFUL )
{
FT_TRACE1(( "FT_Get_Char_Index: too large charcode" ));
FT_TRACE1(( " 0x%x is truncated\n", charcode ));
}
if ( variantSelector > 0xFFFFFFFFUL )
{
FT_TRACE1(( "FT_Get_Char_Index: too large variantSelector" ));
FT_TRACE1(( " 0x%x is truncated\n", variantSelector ));
}
result = vcmap->clazz->char_var_index( vcmap, ucmap,
(FT_UInt32)charcode,
(FT_UInt32)variantSelector );
}
}
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Int )
FT_Face_GetCharVariantIsDefault( FT_Face face,
FT_ULong charcode,
FT_ULong variantSelector )
{
FT_Int result = -1;
if ( face )
{
FT_CharMap charmap = find_variant_selector_charmap( face );
if ( charmap != NULL )
{
FT_CMap vcmap = FT_CMAP( charmap );
if ( charcode > 0xFFFFFFFFUL )
{
FT_TRACE1(( "FT_Get_Char_Index: too large charcode" ));
FT_TRACE1(( " 0x%x is truncated\n", charcode ));
}
if ( variantSelector > 0xFFFFFFFFUL )
{
FT_TRACE1(( "FT_Get_Char_Index: too large variantSelector" ));
FT_TRACE1(( " 0x%x is truncated\n", variantSelector ));
}
result = vcmap->clazz->char_var_default( vcmap,
(FT_UInt32)charcode,
(FT_UInt32)variantSelector );
}
}
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_UInt32* )
FT_Face_GetVariantSelectors( FT_Face face )
{
FT_UInt32 *result = NULL;
if ( face )
{
FT_CharMap charmap = find_variant_selector_charmap( face );
if ( charmap != NULL )
{
FT_CMap vcmap = FT_CMAP( charmap );
FT_Memory memory = FT_FACE_MEMORY( face );
result = vcmap->clazz->variant_list( vcmap, memory );
}
}
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_UInt32* )
FT_Face_GetVariantsOfChar( FT_Face face,
FT_ULong charcode )
{
FT_UInt32 *result = NULL;
if ( face )
{
FT_CharMap charmap = find_variant_selector_charmap( face );
if ( charmap != NULL )
{
FT_CMap vcmap = FT_CMAP( charmap );
FT_Memory memory = FT_FACE_MEMORY( face );
if ( charcode > 0xFFFFFFFFUL )
{
FT_TRACE1(( "FT_Get_Char_Index: too large charcode" ));
FT_TRACE1(( " 0x%x is truncated\n", charcode ));
}
result = vcmap->clazz->charvariant_list( vcmap, memory,
(FT_UInt32)charcode );
}
}
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_UInt32* )
FT_Face_GetCharsOfVariant( FT_Face face,
FT_ULong variantSelector )
{
FT_UInt32 *result = NULL;
if ( face )
{
FT_CharMap charmap = find_variant_selector_charmap( face );
if ( charmap != NULL )
{
FT_CMap vcmap = FT_CMAP( charmap );
FT_Memory memory = FT_FACE_MEMORY( face );
if ( variantSelector > 0xFFFFFFFFUL )
{
FT_TRACE1(( "FT_Get_Char_Index: too large variantSelector" ));
FT_TRACE1(( " 0x%x is truncated\n", variantSelector ));
}
result = vcmap->clazz->variantchar_list( vcmap, memory,
(FT_UInt32)variantSelector );
}
}
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_UInt )
FT_Get_Name_Index( FT_Face face,
FT_String* glyph_name )
{
FT_UInt result = 0;
if ( face && FT_HAS_GLYPH_NAMES( face ) )
{
FT_Service_GlyphDict service;
FT_FACE_LOOKUP_SERVICE( face,
service,
GLYPH_DICT );
if ( service && service->name_index )
result = service->name_index( face, glyph_name );
}
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_Glyph_Name( FT_Face face,
FT_UInt glyph_index,
FT_Pointer buffer,
FT_UInt buffer_max )
{
FT_Error error = FT_Err_Invalid_Argument;
/* clean up buffer */
if ( buffer && buffer_max > 0 )
((FT_Byte*)buffer)[0] = 0;
if ( face &&
(FT_Long)glyph_index <= face->num_glyphs &&
FT_HAS_GLYPH_NAMES( face ) )
{
FT_Service_GlyphDict service;
FT_FACE_LOOKUP_SERVICE( face,
service,
GLYPH_DICT );
if ( service && service->get_name )
error = service->get_name( face, glyph_index, buffer, buffer_max );
}
return error;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( const char* )
FT_Get_Postscript_Name( FT_Face face )
{
const char* result = NULL;
if ( !face )
goto Exit;
if ( !result )
{
FT_Service_PsFontName service;
FT_FACE_LOOKUP_SERVICE( face,
service,
POSTSCRIPT_FONT_NAME );
if ( service && service->get_ps_font_name )
result = service->get_ps_font_name( face );
}
Exit:
return result;
}
/* documentation is in tttables.h */
FT_EXPORT_DEF( void* )
FT_Get_Sfnt_Table( FT_Face face,
FT_Sfnt_Tag tag )
{
void* table = 0;
FT_Service_SFNT_Table service;
if ( face && FT_IS_SFNT( face ) )
{
FT_FACE_FIND_SERVICE( face, service, SFNT_TABLE );
if ( service != NULL )
table = service->get_table( face, tag );
}
return table;
}
/* documentation is in tttables.h */
FT_EXPORT_DEF( FT_Error )
FT_Load_Sfnt_Table( FT_Face face,
FT_ULong tag,
FT_Long offset,
FT_Byte* buffer,
FT_ULong* length )
{
FT_Service_SFNT_Table service;
if ( !face || !FT_IS_SFNT( face ) )
return FT_Err_Invalid_Face_Handle;
FT_FACE_FIND_SERVICE( face, service, SFNT_TABLE );
if ( service == NULL )
return FT_Err_Unimplemented_Feature;
return service->load_table( face, tag, offset, buffer, length );
}
/* documentation is in tttables.h */
FT_EXPORT_DEF( FT_Error )
FT_Sfnt_Table_Info( FT_Face face,
FT_UInt table_index,
FT_ULong *tag,
FT_ULong *length )
{
FT_Service_SFNT_Table service;
FT_ULong offset;
if ( !face || !FT_IS_SFNT( face ) )
return FT_Err_Invalid_Face_Handle;
FT_FACE_FIND_SERVICE( face, service, SFNT_TABLE );
if ( service == NULL )
return FT_Err_Unimplemented_Feature;
return service->table_info( face, table_index, tag, &offset, length );
}
/* documentation is in tttables.h */
FT_EXPORT_DEF( FT_ULong )
FT_Get_CMap_Language_ID( FT_CharMap charmap )
{
FT_Service_TTCMaps service;
FT_Face face;
TT_CMapInfo cmap_info;
if ( !charmap || !charmap->face )
return 0;
face = charmap->face;
FT_FACE_FIND_SERVICE( face, service, TT_CMAP );
if ( service == NULL )
return 0;
if ( service->get_cmap_info( charmap, &cmap_info ))
return 0;
return cmap_info.language;
}
/* documentation is in tttables.h */
FT_EXPORT_DEF( FT_Long )
FT_Get_CMap_Format( FT_CharMap charmap )
{
FT_Service_TTCMaps service;
FT_Face face;
TT_CMapInfo cmap_info;
if ( !charmap || !charmap->face )
return -1;
face = charmap->face;
FT_FACE_FIND_SERVICE( face, service, TT_CMAP );
if ( service == NULL )
return -1;
if ( service->get_cmap_info( charmap, &cmap_info ))
return -1;
return cmap_info.format;
}
/* documentation is in ftsizes.h */
FT_EXPORT_DEF( FT_Error )
FT_Activate_Size( FT_Size size )
{
FT_Face face;
if ( size == NULL )
return FT_Err_Invalid_Argument;
face = size->face;
if ( face == NULL || face->driver == NULL )
return FT_Err_Invalid_Argument;
/* we don't need anything more complex than that; all size objects */
/* are already listed by the face */
face->size = size;
return FT_Err_Ok;
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** R E N D E R E R S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* lookup a renderer by glyph format in the library's list */
FT_BASE_DEF( FT_Renderer )
FT_Lookup_Renderer( FT_Library library,
FT_Glyph_Format format,
FT_ListNode* node )
{
FT_ListNode cur;
FT_Renderer result = 0;
if ( !library )
goto Exit;
cur = library->renderers.head;
if ( node )
{
if ( *node )
cur = (*node)->next;
*node = 0;
}
while ( cur )
{
FT_Renderer renderer = FT_RENDERER( cur->data );
if ( renderer->glyph_format == format )
{
if ( node )
*node = cur;
result = renderer;
break;
}
cur = cur->next;
}
Exit:
return result;
}
static FT_Renderer
ft_lookup_glyph_renderer( FT_GlyphSlot slot )
{
FT_Face face = slot->face;
FT_Library library = FT_FACE_LIBRARY( face );
FT_Renderer result = library->cur_renderer;
if ( !result || result->glyph_format != slot->format )
result = FT_Lookup_Renderer( library, slot->format, 0 );
return result;
}
static void
ft_set_current_renderer( FT_Library library )
{
FT_Renderer renderer;
renderer = FT_Lookup_Renderer( library, FT_GLYPH_FORMAT_OUTLINE, 0 );
library->cur_renderer = renderer;
}
static FT_Error
ft_add_renderer( FT_Module module )
{
FT_Library library = module->library;
FT_Memory memory = library->memory;
FT_Error error;
FT_ListNode node = NULL;
if ( FT_NEW( node ) )
goto Exit;
{
FT_Renderer render = FT_RENDERER( module );
FT_Renderer_Class* clazz = (FT_Renderer_Class*)module->clazz;
render->clazz = clazz;
render->glyph_format = clazz->glyph_format;
/* allocate raster object if needed */
if ( clazz->glyph_format == FT_GLYPH_FORMAT_OUTLINE &&
clazz->raster_class->raster_new )
{
error = clazz->raster_class->raster_new( memory, &render->raster );
if ( error )
goto Fail;
render->raster_render = clazz->raster_class->raster_render;
render->render = clazz->render_glyph;
}
/* add to list */
node->data = module;
FT_List_Add( &library->renderers, node );
ft_set_current_renderer( library );
}
Fail:
if ( error )
FT_FREE( node );
Exit:
return error;
}
static void
ft_remove_renderer( FT_Module module )
{
FT_Library library = module->library;
FT_Memory memory = library->memory;
FT_ListNode node;
node = FT_List_Find( &library->renderers, module );
if ( node )
{
FT_Renderer render = FT_RENDERER( module );
/* release raster object, if any */
if ( render->clazz->glyph_format == FT_GLYPH_FORMAT_OUTLINE &&
render->raster )
render->clazz->raster_class->raster_done( render->raster );
/* remove from list */
FT_List_Remove( &library->renderers, node );
FT_FREE( node );
ft_set_current_renderer( library );
}
}
/* documentation is in ftrender.h */
FT_EXPORT_DEF( FT_Renderer )
FT_Get_Renderer( FT_Library library,
FT_Glyph_Format format )
{
/* test for valid `library' delayed to FT_Lookup_Renderer() */
return FT_Lookup_Renderer( library, format, 0 );
}
/* documentation is in ftrender.h */
FT_EXPORT_DEF( FT_Error )
FT_Set_Renderer( FT_Library library,
FT_Renderer renderer,
FT_UInt num_params,
FT_Parameter* parameters )
{
FT_ListNode node;
FT_Error error = FT_Err_Ok;
if ( !library )
return FT_Err_Invalid_Library_Handle;
if ( !renderer )
return FT_Err_Invalid_Argument;
node = FT_List_Find( &library->renderers, renderer );
if ( !node )
{
error = FT_Err_Invalid_Argument;
goto Exit;
}
FT_List_Up( &library->renderers, node );
if ( renderer->glyph_format == FT_GLYPH_FORMAT_OUTLINE )
library->cur_renderer = renderer;
if ( num_params > 0 )
{
FT_Renderer_SetModeFunc set_mode = renderer->clazz->set_mode;
for ( ; num_params > 0; num_params-- )
{
error = set_mode( renderer, parameters->tag, parameters->data );
if ( error )
break;
parameters++;
}
}
Exit:
return error;
}
FT_BASE_DEF( FT_Error )
FT_Render_Glyph_Internal( FT_Library library,
FT_GlyphSlot slot,
FT_Render_Mode render_mode )
{
FT_Error error = FT_Err_Ok;
FT_Renderer renderer;
/* if it is already a bitmap, no need to do anything */
switch ( slot->format )
{
/* already a bitmap, don't do anything */
case FT_GLYPH_FORMAT_BITMAP:
break;
default:
{
FT_ListNode node = 0;
FT_Bool update = 0;
/* small shortcut for the very common case */
if ( slot->format == FT_GLYPH_FORMAT_OUTLINE )
{
renderer = library->cur_renderer;
node = library->renderers.head;
}
else
renderer = FT_Lookup_Renderer( library, slot->format, &node );
error = FT_Err_Unimplemented_Feature;
while ( renderer )
{
error = renderer->render( renderer, slot, render_mode, NULL );
if ( !error ||
FT_ERROR_BASE( error ) != FT_Err_Cannot_Render_Glyph )
break;
/* FT_Err_Cannot_Render_Glyph is returned if the render mode */
/* is unsupported by the current renderer for this glyph image */
/* format. */
/* now, look for another renderer that supports the same */
/* format. */
renderer = FT_Lookup_Renderer( library, slot->format, &node );
update = 1;
}
/* if we changed the current renderer for the glyph image format */
/* we need to select it as the next current one */
if ( !error && update && renderer )
FT_Set_Renderer( library, renderer, 0, 0 );
}
}
return error;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Render_Glyph( FT_GlyphSlot slot,
FT_Render_Mode render_mode )
{
FT_Library library;
if ( !slot || !slot->face )
return FT_Err_Invalid_Argument;
library = FT_FACE_LIBRARY( slot->face );
return FT_Render_Glyph_Internal( library, slot, render_mode );
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** M O D U L E S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* Destroy_Module */
/* */
/* <Description> */
/* Destroys a given module object. For drivers, this also destroys */
/* all child faces. */
/* */
/* <InOut> */
/* module :: A handle to the target driver object. */
/* */
/* <Note> */
/* The driver _must_ be LOCKED! */
/* */
static void
Destroy_Module( FT_Module module )
{
FT_Memory memory = module->memory;
FT_Module_Class* clazz = module->clazz;
FT_Library library = module->library;
if ( library && library->auto_hinter == module )
library->auto_hinter = 0;
/* if the module is a renderer */
if ( FT_MODULE_IS_RENDERER( module ) )
ft_remove_renderer( module );
/* if the module is a font driver, add some steps */
if ( FT_MODULE_IS_DRIVER( module ) )
Destroy_Driver( FT_DRIVER( module ) );
/* finalize the module object */
if ( clazz->module_done )
clazz->module_done( module );
/* discard it */
FT_FREE( module );
}
/* documentation is in ftmodapi.h */
FT_EXPORT_DEF( FT_Error )
FT_Add_Module( FT_Library library,
const FT_Module_Class* clazz )
{
FT_Error error;
FT_Memory memory;
FT_Module module = NULL;
FT_UInt nn;
#define FREETYPE_VER_FIXED ( ( (FT_Long)FREETYPE_MAJOR << 16 ) | \
FREETYPE_MINOR )
if ( !library )
return FT_Err_Invalid_Library_Handle;
if ( !clazz )
return FT_Err_Invalid_Argument;
/* check freetype version */
if ( clazz->module_requires > FREETYPE_VER_FIXED )
return FT_Err_Invalid_Version;
/* look for a module with the same name in the library's table */
for ( nn = 0; nn < library->num_modules; nn++ )
{
module = library->modules[nn];
if ( ft_strcmp( module->clazz->module_name, clazz->module_name ) == 0 )
{
/* this installed module has the same name, compare their versions */
if ( clazz->module_version <= module->clazz->module_version )
return FT_Err_Lower_Module_Version;
/* remove the module from our list, then exit the loop to replace */
/* it by our new version.. */
FT_Remove_Module( library, module );
break;
}
}
memory = library->memory;
error = FT_Err_Ok;
if ( library->num_modules >= FT_MAX_MODULES )
{
error = FT_Err_Too_Many_Drivers;
goto Exit;
}
/* allocate module object */
if ( FT_ALLOC( module, clazz->module_size ) )
goto Exit;
/* base initialization */
module->library = library;
module->memory = memory;
module->clazz = (FT_Module_Class*)clazz;
/* check whether the module is a renderer - this must be performed */
/* before the normal module initialization */
if ( FT_MODULE_IS_RENDERER( module ) )
{
/* add to the renderers list */
error = ft_add_renderer( module );
if ( error )
goto Fail;
}
/* is the module a auto-hinter? */
if ( FT_MODULE_IS_HINTER( module ) )
library->auto_hinter = module;
/* if the module is a font driver */
if ( FT_MODULE_IS_DRIVER( module ) )
{
/* allocate glyph loader if needed */
FT_Driver driver = FT_DRIVER( module );
driver->clazz = (FT_Driver_Class)module->clazz;
if ( FT_DRIVER_USES_OUTLINES( driver ) )
{
error = FT_GlyphLoader_New( memory, &driver->glyph_loader );
if ( error )
goto Fail;
}
}
if ( clazz->module_init )
{
error = clazz->module_init( module );
if ( error )
goto Fail;
}
/* add module to the library's table */
library->modules[library->num_modules++] = module;
Exit:
return error;
Fail:
if ( FT_MODULE_IS_DRIVER( module ) )
{
FT_Driver driver = FT_DRIVER( module );
if ( FT_DRIVER_USES_OUTLINES( driver ) )
FT_GlyphLoader_Done( driver->glyph_loader );
}
if ( FT_MODULE_IS_RENDERER( module ) )
{
FT_Renderer renderer = FT_RENDERER( module );
if ( renderer->clazz->glyph_format == FT_GLYPH_FORMAT_OUTLINE &&
renderer->raster )
renderer->clazz->raster_class->raster_done( renderer->raster );
}
FT_FREE( module );
goto Exit;
}
/* documentation is in ftmodapi.h */
FT_EXPORT_DEF( FT_Module )
FT_Get_Module( FT_Library library,
const char* module_name )
{
FT_Module result = 0;
FT_Module* cur;
FT_Module* limit;
if ( !library || !module_name )
return result;
cur = library->modules;
limit = cur + library->num_modules;
for ( ; cur < limit; cur++ )
if ( ft_strcmp( cur[0]->clazz->module_name, module_name ) == 0 )
{
result = cur[0];
break;
}
return result;
}
/* documentation is in ftobjs.h */
FT_BASE_DEF( const void* )
FT_Get_Module_Interface( FT_Library library,
const char* mod_name )
{
FT_Module module;
/* test for valid `library' delayed to FT_Get_Module() */
module = FT_Get_Module( library, mod_name );
return module ? module->clazz->module_interface : 0;
}
FT_BASE_DEF( FT_Pointer )
ft_module_get_service( FT_Module module,
const char* service_id )
{
FT_Pointer result = NULL;
if ( module )
{
FT_ASSERT( module->clazz && module->clazz->get_interface );
/* first, look for the service in the module */
if ( module->clazz->get_interface )
result = module->clazz->get_interface( module, service_id );
if ( result == NULL )
{
/* we didn't find it, look in all other modules then */
FT_Library library = module->library;
FT_Module* cur = library->modules;
FT_Module* limit = cur + library->num_modules;
for ( ; cur < limit; cur++ )
{
if ( cur[0] != module )
{
FT_ASSERT( cur[0]->clazz );
if ( cur[0]->clazz->get_interface )
{
result = cur[0]->clazz->get_interface( cur[0], service_id );
if ( result != NULL )
break;
}
}
}
}
}
return result;
}
/* documentation is in ftmodapi.h */
FT_EXPORT_DEF( FT_Error )
FT_Remove_Module( FT_Library library,
FT_Module module )
{
/* try to find the module from the table, then remove it from there */
if ( !library )
return FT_Err_Invalid_Library_Handle;
if ( module )
{
FT_Module* cur = library->modules;
FT_Module* limit = cur + library->num_modules;
for ( ; cur < limit; cur++ )
{
if ( cur[0] == module )
{
/* remove it from the table */
library->num_modules--;
limit--;
while ( cur < limit )
{
cur[0] = cur[1];
cur++;
}
limit[0] = 0;
/* destroy the module */
Destroy_Module( module );
return FT_Err_Ok;
}
}
}
return FT_Err_Invalid_Driver_Handle;
}
FT_Error
ft_property_do( FT_Library library,
const FT_String* module_name,
const FT_String* property_name,
void* value,
FT_Bool set )
{
FT_Module* cur;
FT_Module* limit;
FT_Module_Interface interface;
FT_Service_Properties service;
FT_Bool missing_func;
if ( !library )
return FT_Err_Invalid_Library_Handle;
if ( !module_name || !property_name || !value )
return FT_Err_Invalid_Argument;
cur = library->modules;
limit = cur + library->num_modules;
/* search module */
for ( ; cur < limit; cur++ )
if ( !ft_strcmp( cur[0]->clazz->module_name, module_name ) )
break;
if ( cur == limit )
{
FT_ERROR(( "%s: can't find module `%s'\n",
func_name, module_name ));
return FT_Err_Missing_Module;
}
/* check whether we have a service interface */
if ( !cur[0]->clazz->get_interface )
{
FT_ERROR(( "%s: module `%s' doesn't support properties\n",
func_name, module_name ));
return FT_Err_Unimplemented_Feature;
}
/* search property service */
interface = cur[0]->clazz->get_interface( cur[0],
FT_SERVICE_ID_PROPERTIES );
if ( !interface )
{
FT_ERROR(( "%s: module `%s' doesn't support properties\n",
func_name, module_name ));
return FT_Err_Unimplemented_Feature;
}
service = (FT_Service_Properties)interface;
if ( set )
missing_func = !service->set_property;
else
missing_func = !service->get_property;
if ( missing_func )
{
FT_ERROR(( "%s: property service of module `%s' is broken\n",
func_name, module_name ));
return FT_Err_Unimplemented_Feature;
}
return set ? service->set_property( cur[0], property_name, value )
: service->get_property( cur[0], property_name, value );
}
/* documentation is in ftmodapi.h */
FT_Error
FT_Property_Set( FT_Library library,
const FT_String* module_name,
const FT_String* property_name,
const void* value )
{
return ft_property_do( library,
module_name,
property_name,
(void*)value,
TRUE );
}
/* documentation is in ftmodapi.h */
FT_Error
FT_Property_Get( FT_Library library,
const FT_String* module_name,
const FT_String* property_name,
void* value )
{
return ft_property_do( library,
module_name,
property_name,
value,
FALSE );
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** L I B R A R Y ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* documentation is in ftmodapi.h */
FT_EXPORT_DEF( FT_Error )
FT_Reference_Library( FT_Library library )
{
library->refcount++;
return FT_Err_Ok;
}
/* documentation is in ftmodapi.h */
FT_EXPORT_DEF( FT_Error )
FT_New_Library( FT_Memory memory,
FT_Library *alibrary )
{
FT_Library library = NULL;
FT_Error error;
if ( !memory )
return FT_Err_Invalid_Argument;
/* first of all, allocate the library object */
if ( FT_NEW( library ) )
return error;
library->memory = memory;
/* allocate the render pool */
library->raster_pool_size = FT_RENDER_POOL_SIZE;
#if FT_RENDER_POOL_SIZE > 0
if ( FT_ALLOC( library->raster_pool, FT_RENDER_POOL_SIZE ) )
goto Fail;
#endif
library->version_major = FREETYPE_MAJOR;
library->version_minor = FREETYPE_MINOR;
library->version_patch = FREETYPE_PATCH;
library->refcount = 1;
/* That's ok now */
*alibrary = library;
return FT_Err_Ok;
Fail:
FT_FREE( library );
return error;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( void )
FT_Library_Version( FT_Library library,
FT_Int *amajor,
FT_Int *aminor,
FT_Int *apatch )
{
FT_Int major = 0;
FT_Int minor = 0;
FT_Int patch = 0;
if ( library )
{
major = library->version_major;
minor = library->version_minor;
patch = library->version_patch;
}
if ( amajor )
*amajor = major;
if ( aminor )
*aminor = minor;
if ( apatch )
*apatch = patch;
}
/* documentation is in ftmodapi.h */
FT_EXPORT_DEF( FT_Error )
FT_Done_Library( FT_Library library )
{
FT_Memory memory;
if ( !library )
return FT_Err_Invalid_Library_Handle;
library->refcount--;
if ( library->refcount > 0 )
goto Exit;
memory = library->memory;
/*
* Close all faces in the library. If we don't do this, we can have
* some subtle memory leaks.
*
* Example:
*
* - the cff font driver uses the pshinter module in cff_size_done
* - if the pshinter module is destroyed before the cff font driver,
* opened FT_Face objects managed by the driver are not properly
* destroyed, resulting in a memory leak
*
* Some faces are dependent on other faces, like Type42 faces that
* depend on TrueType faces synthesized internally.
*
* The order of drivers should be specified in driver_name[].
*/
{
FT_UInt m, n;
const char* driver_name[] = { "type42", NULL };
for ( m = 0;
m < sizeof ( driver_name ) / sizeof ( driver_name[0] );
m++ )
{
for ( n = 0; n < library->num_modules; n++ )
{
FT_Module module = library->modules[n];
const char* module_name = module->clazz->module_name;
FT_List faces;
if ( driver_name[m] &&
ft_strcmp( module_name, driver_name[m] ) != 0 )
continue;
if ( ( module->clazz->module_flags & FT_MODULE_FONT_DRIVER ) == 0 )
continue;
FT_TRACE7(( "FT_Done_Library: close faces for %s\n", module_name ));
faces = &FT_DRIVER( module )->faces_list;
while ( faces->head )
{
FT_Done_Face( FT_FACE( faces->head->data ) );
if ( faces->head )
FT_TRACE0(( "FT_Done_Library: failed to free some faces\n" ));
}
}
}
}
/* Close all other modules in the library */
#if 1
/* XXX Modules are removed in the reversed order so that */
/* type42 module is removed before truetype module. This */
/* avoids double free in some occasions. It is a hack. */
while ( library->num_modules > 0 )
FT_Remove_Module( library,
library->modules[library->num_modules - 1] );
#else
{
FT_UInt n;
for ( n = 0; n < library->num_modules; n++ )
{
FT_Module module = library->modules[n];
if ( module )
{
Destroy_Module( module );
library->modules[n] = 0;
}
}
}
#endif
/* Destroy raster objects */
FT_FREE( library->raster_pool );
library->raster_pool_size = 0;
FT_FREE( library );
Exit:
return FT_Err_Ok;
}
/* documentation is in ftmodapi.h */
FT_EXPORT_DEF( void )
FT_Set_Debug_Hook( FT_Library library,
FT_UInt hook_index,
FT_DebugHook_Func debug_hook )
{
if ( library && debug_hook &&
hook_index <
( sizeof ( library->debug_hooks ) / sizeof ( void* ) ) )
library->debug_hooks[hook_index] = debug_hook;
}
/* documentation is in ftmodapi.h */
FT_EXPORT_DEF( FT_TrueTypeEngineType )
FT_Get_TrueType_Engine_Type( FT_Library library )
{
FT_TrueTypeEngineType result = FT_TRUETYPE_ENGINE_TYPE_NONE;
if ( library )
{
FT_Module module = FT_Get_Module( library, "truetype" );
if ( module )
{
FT_Service_TrueTypeEngine service;
service = (FT_Service_TrueTypeEngine)
ft_module_get_service( module,
FT_SERVICE_ID_TRUETYPE_ENGINE );
if ( service )
result = service->engine_type;
}
}
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_SubGlyph_Info( FT_GlyphSlot glyph,
FT_UInt sub_index,
FT_Int *p_index,
FT_UInt *p_flags,
FT_Int *p_arg1,
FT_Int *p_arg2,
FT_Matrix *p_transform )
{
FT_Error error = FT_Err_Invalid_Argument;
if ( glyph &&
glyph->subglyphs &&
glyph->format == FT_GLYPH_FORMAT_COMPOSITE &&
sub_index < glyph->num_subglyphs )
{
FT_SubGlyph subg = glyph->subglyphs + sub_index;
*p_index = subg->index;
*p_flags = subg->flags;
*p_arg1 = subg->arg1;
*p_arg2 = subg->arg2;
*p_transform = subg->transform;
}
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftoutln.c */
/* */
/* FreeType outline management (body). */
/* */
/* Copyright 1996-2008, 2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* All functions are declared in freetype.h. */
/* */
/*************************************************************************/
/***************************************************************************/
/* */
/* fttrigon.h */
/* */
/* FreeType trigonometric functions (specification). */
/* */
/* Copyright 2001, 2003, 2005, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTTRIGON_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* computations */
/* */
/*************************************************************************/
/*************************************************************************
*
* @type:
* FT_Angle
*
* @description:
* This type is used to model angle values in FreeType. Note that the
* angle is a 16.16 fixed float value expressed in degrees.
*
*/
typedef FT_Fixed FT_Angle;
/*************************************************************************
*
* @macro:
* FT_ANGLE_PI
*
* @description:
* The angle pi expressed in @FT_Angle units.
*
*/
#define FT_ANGLE_PI ( 180L << 16 )
/*************************************************************************
*
* @macro:
* FT_ANGLE_2PI
*
* @description:
* The angle 2*pi expressed in @FT_Angle units.
*
*/
#define FT_ANGLE_2PI ( FT_ANGLE_PI * 2 )
/*************************************************************************
*
* @macro:
* FT_ANGLE_PI2
*
* @description:
* The angle pi/2 expressed in @FT_Angle units.
*
*/
#define FT_ANGLE_PI2 ( FT_ANGLE_PI / 2 )
/*************************************************************************
*
* @macro:
* FT_ANGLE_PI4
*
* @description:
* The angle pi/4 expressed in @FT_Angle units.
*
*/
#define FT_ANGLE_PI4 ( FT_ANGLE_PI / 4 )
/*************************************************************************
*
* @function:
* FT_Sin
*
* @description:
* Return the sinus of a given angle in fixed point format.
*
* @input:
* angle ::
* The input angle.
*
* @return:
* The sinus value.
*
* @note:
* If you need both the sinus and cosinus for a given angle, use the
* function @FT_Vector_Unit.
*
*/
FT_EXPORT( FT_Fixed )
FT_Sin( FT_Angle angle );
/*************************************************************************
*
* @function:
* FT_Cos
*
* @description:
* Return the cosinus of a given angle in fixed point format.
*
* @input:
* angle ::
* The input angle.
*
* @return:
* The cosinus value.
*
* @note:
* If you need both the sinus and cosinus for a given angle, use the
* function @FT_Vector_Unit.
*
*/
FT_EXPORT( FT_Fixed )
FT_Cos( FT_Angle angle );
/*************************************************************************
*
* @function:
* FT_Tan
*
* @description:
* Return the tangent of a given angle in fixed point format.
*
* @input:
* angle ::
* The input angle.
*
* @return:
* The tangent value.
*
*/
FT_EXPORT( FT_Fixed )
FT_Tan( FT_Angle angle );
/*************************************************************************
*
* @function:
* FT_Atan2
*
* @description:
* Return the arc-tangent corresponding to a given vector (x,y) in
* the 2d plane.
*
* @input:
* x ::
* The horizontal vector coordinate.
*
* y ::
* The vertical vector coordinate.
*
* @return:
* The arc-tangent value (i.e. angle).
*
*/
FT_EXPORT( FT_Angle )
FT_Atan2( FT_Fixed x,
FT_Fixed y );
/*************************************************************************
*
* @function:
* FT_Angle_Diff
*
* @description:
* Return the difference between two angles. The result is always
* constrained to the ]-PI..PI] interval.
*
* @input:
* angle1 ::
* First angle.
*
* angle2 ::
* Second angle.
*
* @return:
* Constrained value of `value2-value1'.
*
*/
FT_EXPORT( FT_Angle )
FT_Angle_Diff( FT_Angle angle1,
FT_Angle angle2 );
/*************************************************************************
*
* @function:
* FT_Vector_Unit
*
* @description:
* Return the unit vector corresponding to a given angle. After the
* call, the value of `vec.x' will be `sin(angle)', and the value of
* `vec.y' will be `cos(angle)'.
*
* This function is useful to retrieve both the sinus and cosinus of a
* given angle quickly.
*
* @output:
* vec ::
* The address of target vector.
*
* @input:
* angle ::
* The address of angle.
*
*/
FT_EXPORT( void )
FT_Vector_Unit( FT_Vector* vec,
FT_Angle angle );
/*************************************************************************
*
* @function:
* FT_Vector_Rotate
*
* @description:
* Rotate a vector by a given angle.
*
* @inout:
* vec ::
* The address of target vector.
*
* @input:
* angle ::
* The address of angle.
*
*/
FT_EXPORT( void )
FT_Vector_Rotate( FT_Vector* vec,
FT_Angle angle );
/*************************************************************************
*
* @function:
* FT_Vector_Length
*
* @description:
* Return the length of a given vector.
*
* @input:
* vec ::
* The address of target vector.
*
* @return:
* The vector length, expressed in the same units that the original
* vector coordinates.
*
*/
FT_EXPORT( FT_Fixed )
FT_Vector_Length( FT_Vector* vec );
/*************************************************************************
*
* @function:
* FT_Vector_Polarize
*
* @description:
* Compute both the length and angle of a given vector.
*
* @input:
* vec ::
* The address of source vector.
*
* @output:
* length ::
* The vector length.
*
* angle ::
* The vector angle.
*
*/
FT_EXPORT( void )
FT_Vector_Polarize( FT_Vector* vec,
FT_Fixed *length,
FT_Angle *angle );
/*************************************************************************
*
* @function:
* FT_Vector_From_Polar
*
* @description:
* Compute vector coordinates from a length and angle.
*
* @output:
* vec ::
* The address of source vector.
*
* @input:
* length ::
* The vector length.
*
* angle ::
* The vector angle.
*
*/
FT_EXPORT( void )
FT_Vector_From_Polar( FT_Vector* vec,
FT_Fixed length,
FT_Angle angle );
/* */
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_outline
static
const FT_Outline null_outline = { 0, 0, 0, 0, 0, 0 };
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_Decompose( FT_Outline* outline,
const FT_Outline_Funcs* func_interface,
void* user )
{
#undef SCALED
#define SCALED( x ) ( ( (x) << shift ) - delta )
FT_Vector v_last;
FT_Vector v_control;
FT_Vector v_start;
FT_Vector* point;
FT_Vector* limit;
char* tags;
FT_Error error;
/* index of contour in outline */
FT_Int n;
/* index of first point in contour */
FT_UInt first;
/* current point's state */
FT_Int tag;
FT_Int shift;
FT_Pos delta;
if ( !outline || !func_interface )
return FT_Err_Invalid_Argument;
shift = func_interface->shift;
delta = func_interface->delta;
first = 0;
for ( n = 0; n < outline->n_contours; n++ )
{
/* index of last point in contour */
FT_Int last;
FT_TRACE5(( "FT_Outline_Decompose: Outline %d\n", n ));
last = outline->contours[n];
if ( last < 0 )
goto Invalid_Outline;
limit = outline->points + last;
v_start = outline->points[first];
v_start.x = SCALED( v_start.x );
v_start.y = SCALED( v_start.y );
v_last = outline->points[last];
v_last.x = SCALED( v_last.x );
v_last.y = SCALED( v_last.y );
v_control = v_start;
point = outline->points + first;
tags = outline->tags + first;
tag = FT_CURVE_TAG( tags[0] );
/* A contour cannot start with a cubic control point! */
if ( tag == FT_CURVE_TAG_CUBIC )
goto Invalid_Outline;
/* check first point to determine origin */
if ( tag == FT_CURVE_TAG_CONIC )
{
/* first point is conic control. Yes, this happens. */
if ( FT_CURVE_TAG( outline->tags[last] ) == FT_CURVE_TAG_ON )
{
/* start at last point if it is on the curve */
v_start = v_last;
limit--;
}
else
{
/* if both first and last points are conic, */
/* start at their middle and record its position */
/* for closure */
v_start.x = ( v_start.x + v_last.x ) / 2;
v_start.y = ( v_start.y + v_last.y ) / 2;
v_last = v_start;
}
point--;
tags--;
}
FT_TRACE5(( " move to (%.2f, %.2f)\n",
v_start.x / 64.0, v_start.y / 64.0 ));
error = func_interface->move_to( &v_start, user );
if ( error )
goto Exit;
while ( point < limit )
{
point++;
tags++;
tag = FT_CURVE_TAG( tags[0] );
switch ( tag )
{
/* emit a single line_to */
case FT_CURVE_TAG_ON:
{
FT_Vector vec;
vec.x = SCALED( point->x );
vec.y = SCALED( point->y );
FT_TRACE5(( " line to (%.2f, %.2f)\n",
vec.x / 64.0, vec.y / 64.0 ));
error = func_interface->line_to( &vec, user );
if ( error )
goto Exit;
continue;
}
/* consume conic arcs */
case FT_CURVE_TAG_CONIC:
v_control.x = SCALED( point->x );
v_control.y = SCALED( point->y );
Do_Conic:
if ( point < limit )
{
FT_Vector vec;
FT_Vector v_middle;
point++;
tags++;
tag = FT_CURVE_TAG( tags[0] );
vec.x = SCALED( point->x );
vec.y = SCALED( point->y );
if ( tag == FT_CURVE_TAG_ON )
{
FT_TRACE5(( " conic to (%.2f, %.2f)"
" with control (%.2f, %.2f)\n",
vec.x / 64.0, vec.y / 64.0,
v_control.x / 64.0, v_control.y / 64.0 ));
error = func_interface->conic_to( &v_control, &vec, user );
if ( error )
goto Exit;
continue;
}
if ( tag != FT_CURVE_TAG_CONIC )
goto Invalid_Outline;
v_middle.x = ( v_control.x + vec.x ) / 2;
v_middle.y = ( v_control.y + vec.y ) / 2;
FT_TRACE5(( " conic to (%.2f, %.2f)"
" with control (%.2f, %.2f)\n",
v_middle.x / 64.0, v_middle.y / 64.0,
v_control.x / 64.0, v_control.y / 64.0 ));
error = func_interface->conic_to( &v_control, &v_middle, user );
if ( error )
goto Exit;
v_control = vec;
goto Do_Conic;
}
FT_TRACE5(( " conic to (%.2f, %.2f)"
" with control (%.2f, %.2f)\n",
v_start.x / 64.0, v_start.y / 64.0,
v_control.x / 64.0, v_control.y / 64.0 ));
error = func_interface->conic_to( &v_control, &v_start, user );
goto Close;
/* FT_CURVE_TAG_CUBIC */
default:
{
FT_Vector vec1, vec2;
if ( point + 1 > limit ||
FT_CURVE_TAG( tags[1] ) != FT_CURVE_TAG_CUBIC )
goto Invalid_Outline;
point += 2;
tags += 2;
vec1.x = SCALED( point[-2].x );
vec1.y = SCALED( point[-2].y );
vec2.x = SCALED( point[-1].x );
vec2.y = SCALED( point[-1].y );
if ( point <= limit )
{
FT_Vector vec;
vec.x = SCALED( point->x );
vec.y = SCALED( point->y );
FT_TRACE5(( " cubic to (%.2f, %.2f)"
" with controls (%.2f, %.2f) and (%.2f, %.2f)\n",
vec.x / 64.0, vec.y / 64.0,
vec1.x / 64.0, vec1.y / 64.0,
vec2.x / 64.0, vec2.y / 64.0 ));
error = func_interface->cubic_to( &vec1, &vec2, &vec, user );
if ( error )
goto Exit;
continue;
}
FT_TRACE5(( " cubic to (%.2f, %.2f)"
" with controls (%.2f, %.2f) and (%.2f, %.2f)\n",
v_start.x / 64.0, v_start.y / 64.0,
vec1.x / 64.0, vec1.y / 64.0,
vec2.x / 64.0, vec2.y / 64.0 ));
error = func_interface->cubic_to( &vec1, &vec2, &v_start, user );
goto Close;
}
}
}
/* close the contour with a line segment */
FT_TRACE5(( " line to (%.2f, %.2f)\n",
v_start.x / 64.0, v_start.y / 64.0 ));
error = func_interface->line_to( &v_start, user );
Close:
if ( error )
goto Exit;
first = last + 1;
}
FT_TRACE5(( "FT_Outline_Decompose: Done\n", n ));
return FT_Err_Ok;
Exit:
FT_TRACE5(( "FT_Outline_Decompose: Error %d\n", error ));
return error;
Invalid_Outline:
return FT_Err_Invalid_Outline;
}
FT_EXPORT_DEF( FT_Error )
FT_Outline_New_Internal( FT_Memory memory,
FT_UInt numPoints,
FT_Int numContours,
FT_Outline *anoutline )
{
FT_Error error;
if ( !anoutline || !memory )
return FT_Err_Invalid_Argument;
*anoutline = null_outline;
if ( FT_NEW_ARRAY( anoutline->points, numPoints ) ||
FT_NEW_ARRAY( anoutline->tags, numPoints ) ||
FT_NEW_ARRAY( anoutline->contours, numContours ) )
goto Fail;
anoutline->n_points = (FT_UShort)numPoints;
anoutline->n_contours = (FT_Short)numContours;
anoutline->flags |= FT_OUTLINE_OWNER;
return FT_Err_Ok;
Fail:
anoutline->flags |= FT_OUTLINE_OWNER;
FT_Outline_Done_Internal( memory, anoutline );
return error;
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_New( FT_Library library,
FT_UInt numPoints,
FT_Int numContours,
FT_Outline *anoutline )
{
if ( !library )
return FT_Err_Invalid_Library_Handle;
return FT_Outline_New_Internal( library->memory, numPoints,
numContours, anoutline );
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_Check( FT_Outline* outline )
{
if ( outline )
{
FT_Int n_points = outline->n_points;
FT_Int n_contours = outline->n_contours;
FT_Int end0, end;
FT_Int n;
/* empty glyph? */
if ( n_points == 0 && n_contours == 0 )
return 0;
/* check point and contour counts */
if ( n_points <= 0 || n_contours <= 0 )
goto Bad;
end0 = end = -1;
for ( n = 0; n < n_contours; n++ )
{
end = outline->contours[n];
/* note that we don't accept empty contours */
if ( end <= end0 || end >= n_points )
goto Bad;
end0 = end;
}
if ( end != n_points - 1 )
goto Bad;
/* XXX: check the tags array */
return 0;
}
Bad:
return FT_Err_Invalid_Argument;
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_Copy( const FT_Outline* source,
FT_Outline *target )
{
FT_Int is_owner;
if ( !source || !target ||
source->n_points != target->n_points ||
source->n_contours != target->n_contours )
return FT_Err_Invalid_Argument;
if ( source == target )
return FT_Err_Ok;
FT_ARRAY_COPY( target->points, source->points, source->n_points );
FT_ARRAY_COPY( target->tags, source->tags, source->n_points );
FT_ARRAY_COPY( target->contours, source->contours, source->n_contours );
/* copy all flags, except the `FT_OUTLINE_OWNER' one */
is_owner = target->flags & FT_OUTLINE_OWNER;
target->flags = source->flags;
target->flags &= ~FT_OUTLINE_OWNER;
target->flags |= is_owner;
return FT_Err_Ok;
}
FT_EXPORT_DEF( FT_Error )
FT_Outline_Done_Internal( FT_Memory memory,
FT_Outline* outline )
{
if ( memory && outline )
{
if ( outline->flags & FT_OUTLINE_OWNER )
{
FT_FREE( outline->points );
FT_FREE( outline->tags );
FT_FREE( outline->contours );
}
*outline = null_outline;
return FT_Err_Ok;
}
else
return FT_Err_Invalid_Argument;
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_Done( FT_Library library,
FT_Outline* outline )
{
/* check for valid `outline' in FT_Outline_Done_Internal() */
if ( !library )
return FT_Err_Invalid_Library_Handle;
return FT_Outline_Done_Internal( library->memory, outline );
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( void )
FT_Outline_Get_CBox( const FT_Outline* outline,
FT_BBox *acbox )
{
FT_Pos xMin, yMin, xMax, yMax;
if ( outline && acbox )
{
if ( outline->n_points == 0 )
{
xMin = 0;
yMin = 0;
xMax = 0;
yMax = 0;
}
else
{
FT_Vector* vec = outline->points;
FT_Vector* limit = vec + outline->n_points;
xMin = xMax = vec->x;
yMin = yMax = vec->y;
vec++;
for ( ; vec < limit; vec++ )
{
FT_Pos x, y;
x = vec->x;
if ( x < xMin ) xMin = x;
if ( x > xMax ) xMax = x;
y = vec->y;
if ( y < yMin ) yMin = y;
if ( y > yMax ) yMax = y;
}
}
acbox->xMin = xMin;
acbox->xMax = xMax;
acbox->yMin = yMin;
acbox->yMax = yMax;
}
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( void )
FT_Outline_Translate( const FT_Outline* outline,
FT_Pos xOffset,
FT_Pos yOffset )
{
FT_UShort n;
FT_Vector* vec;
if ( !outline )
return;
vec = outline->points;
for ( n = 0; n < outline->n_points; n++ )
{
vec->x += xOffset;
vec->y += yOffset;
vec++;
}
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( void )
FT_Outline_Reverse( FT_Outline* outline )
{
FT_UShort n;
FT_Int first, last;
if ( !outline )
return;
first = 0;
for ( n = 0; n < outline->n_contours; n++ )
{
last = outline->contours[n];
/* reverse point table */
{
FT_Vector* p = outline->points + first;
FT_Vector* q = outline->points + last;
FT_Vector swap;
while ( p < q )
{
swap = *p;
*p = *q;
*q = swap;
p++;
q--;
}
}
/* reverse tags table */
{
char* p = outline->tags + first;
char* q = outline->tags + last;
char swap;
while ( p < q )
{
swap = *p;
*p = *q;
*q = swap;
p++;
q--;
}
}
first = last + 1;
}
outline->flags ^= FT_OUTLINE_REVERSE_FILL;
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_Render( FT_Library library,
FT_Outline* outline,
FT_Raster_Params* params )
{
FT_Error error;
FT_Bool update = FALSE;
FT_Renderer renderer;
FT_ListNode node;
if ( !library )
return FT_Err_Invalid_Library_Handle;
if ( !outline || !params )
return FT_Err_Invalid_Argument;
renderer = library->cur_renderer;
node = library->renderers.head;
params->source = (void*)outline;
error = FT_Err_Cannot_Render_Glyph;
while ( renderer )
{
error = renderer->raster_render( renderer->raster, params );
if ( !error || FT_ERROR_BASE( error ) != FT_Err_Cannot_Render_Glyph )
break;
/* FT_Err_Cannot_Render_Glyph is returned if the render mode */
/* is unsupported by the current renderer for this glyph image */
/* format */
/* now, look for another renderer that supports the same */
/* format */
renderer = FT_Lookup_Renderer( library, FT_GLYPH_FORMAT_OUTLINE,
&node );
update = TRUE;
}
/* if we changed the current renderer for the glyph image format */
/* we need to select it as the next current one */
if ( !error && update && renderer )
FT_Set_Renderer( library, renderer, 0, 0 );
return error;
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_Get_Bitmap( FT_Library library,
FT_Outline* outline,
const FT_Bitmap *abitmap )
{
FT_Raster_Params params;
if ( !abitmap )
return FT_Err_Invalid_Argument;
/* other checks are delayed to FT_Outline_Render() */
params.target = abitmap;
params.flags = 0;
if ( abitmap->pixel_mode == FT_PIXEL_MODE_GRAY ||
abitmap->pixel_mode == FT_PIXEL_MODE_LCD ||
abitmap->pixel_mode == FT_PIXEL_MODE_LCD_V )
params.flags |= FT_RASTER_FLAG_AA;
return FT_Outline_Render( library, outline, &params );
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( void )
FT_Vector_Transform( FT_Vector* vector,
const FT_Matrix* matrix )
{
FT_Pos xz, yz;
if ( !vector || !matrix )
return;
xz = FT_MulFix( vector->x, matrix->xx ) +
FT_MulFix( vector->y, matrix->xy );
yz = FT_MulFix( vector->x, matrix->yx ) +
FT_MulFix( vector->y, matrix->yy );
vector->x = xz;
vector->y = yz;
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( void )
FT_Outline_Transform( const FT_Outline* outline,
const FT_Matrix* matrix )
{
FT_Vector* vec;
FT_Vector* limit;
if ( !outline || !matrix )
return;
vec = outline->points;
limit = vec + outline->n_points;
for ( ; vec < limit; vec++ )
FT_Vector_Transform( vec, matrix );
}
#if 0
#define FT_OUTLINE_GET_CONTOUR( outline, c, first, last ) \
do { \
(first) = ( c > 0 ) ? (outline)->points + \
(outline)->contours[c - 1] + 1 \
: (outline)->points; \
(last) = (outline)->points + (outline)->contours[c]; \
} while ( 0 )
/* Is a point in some contour? */
/* */
/* We treat every point of the contour as if it */
/* it were ON. That is, we allow false positives, */
/* but disallow false negatives. (XXX really?) */
static FT_Bool
ft_contour_has( FT_Outline* outline,
FT_Short c,
FT_Vector* point )
{
FT_Vector* first;
FT_Vector* last;
FT_Vector* a;
FT_Vector* b;
FT_UInt n = 0;
FT_OUTLINE_GET_CONTOUR( outline, c, first, last );
for ( a = first; a <= last; a++ )
{
FT_Pos x;
FT_Int intersect;
b = ( a == last ) ? first : a + 1;
intersect = ( a->y - point->y ) ^ ( b->y - point->y );
/* a and b are on the same side */
if ( intersect >= 0 )
{
if ( intersect == 0 && a->y == point->y )
{
if ( ( a->x <= point->x && b->x >= point->x ) ||
( a->x >= point->x && b->x <= point->x ) )
return 1;
}
continue;
}
x = a->x + ( b->x - a->x ) * (point->y - a->y ) / ( b->y - a->y );
if ( x < point->x )
n++;
else if ( x == point->x )
return 1;
}
return n & 1;
}
static FT_Bool
ft_contour_enclosed( FT_Outline* outline,
FT_UShort c )
{
FT_Vector* first;
FT_Vector* last;
FT_Short i;
FT_OUTLINE_GET_CONTOUR( outline, c, first, last );
for ( i = 0; i < outline->n_contours; i++ )
{
if ( i != c && ft_contour_has( outline, i, first ) )
{
FT_Vector* pt;
for ( pt = first + 1; pt <= last; pt++ )
if ( !ft_contour_has( outline, i, pt ) )
return 0;
return 1;
}
}
return 0;
}
/* This version differs from the public one in that each */
/* part (contour not enclosed in another contour) of the */
/* outline is checked for orientation. This is */
/* necessary for some buggy CJK fonts. */
static FT_Orientation
ft_outline_get_orientation( FT_Outline* outline )
{
FT_Short i;
FT_Vector* first;
FT_Vector* last;
FT_Orientation orient = FT_ORIENTATION_NONE;
first = outline->points;
for ( i = 0; i < outline->n_contours; i++, first = last + 1 )
{
FT_Vector* point;
FT_Vector* xmin_point;
FT_Pos xmin;
last = outline->points + outline->contours[i];
/* skip degenerate contours */
if ( last < first + 2 )
continue;
if ( ft_contour_enclosed( outline, i ) )
continue;
xmin = first->x;
xmin_point = first;
for ( point = first + 1; point <= last; point++ )
{
if ( point->x < xmin )
{
xmin = point->x;
xmin_point = point;
}
}
/* check the orientation of the contour */
{
FT_Vector* prev;
FT_Vector* next;
FT_Orientation o;
prev = ( xmin_point == first ) ? last : xmin_point - 1;
next = ( xmin_point == last ) ? first : xmin_point + 1;
if ( FT_Atan2( prev->x - xmin_point->x, prev->y - xmin_point->y ) >
FT_Atan2( next->x - xmin_point->x, next->y - xmin_point->y ) )
o = FT_ORIENTATION_POSTSCRIPT;
else
o = FT_ORIENTATION_TRUETYPE;
if ( orient == FT_ORIENTATION_NONE )
orient = o;
else if ( orient != o )
return FT_ORIENTATION_NONE;
}
}
return orient;
}
/* 0 */
#endif
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_Embolden( FT_Outline* outline,
FT_Pos strength )
{
return FT_Outline_EmboldenXY( outline, strength, strength );
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_EmboldenXY( FT_Outline* outline,
FT_Pos xstrength,
FT_Pos ystrength )
{
FT_Vector* points;
FT_Vector v_prev, v_first, v_next, v_cur;
FT_Int c, n, first;
FT_Int orientation;
if ( !outline )
return FT_Err_Invalid_Argument;
xstrength /= 2;
ystrength /= 2;
if ( xstrength == 0 && ystrength == 0 )
return FT_Err_Ok;
orientation = FT_Outline_Get_Orientation( outline );
if ( orientation == FT_ORIENTATION_NONE )
{
if ( outline->n_contours )
return FT_Err_Invalid_Argument;
else
return FT_Err_Ok;
}
points = outline->points;
first = 0;
for ( c = 0; c < outline->n_contours; c++ )
{
FT_Vector in, out, shift;
FT_Fixed l_in, l_out, l, q, d;
int last = outline->contours[c];
v_first = points[first];
v_prev = points[last];
v_cur = v_first;
/* compute the incoming vector and its length */
in.x = v_cur.x - v_prev.x;
in.y = v_cur.y - v_prev.y;
l_in = FT_Vector_Length( &in );
for ( n = first; n <= last; n++ )
{
if ( n < last )
v_next = points[n + 1];
else
v_next = v_first;
/* compute the outgoing vector and its length */
out.x = v_next.x - v_cur.x;
out.y = v_next.y - v_cur.y;
l_out = FT_Vector_Length( &out );
d = l_in * l_out + in.x * out.x + in.y * out.y;
/* shift only if turn is less then ~160 degrees */
if ( 16 * d > l_in * l_out )
{
/* shift components are aligned along bisector */
/* and directed according to the outline orientation. */
shift.x = l_out * in.y + l_in * out.y;
shift.y = l_out * in.x + l_in * out.x;
if ( orientation == FT_ORIENTATION_TRUETYPE )
shift.x = -shift.x;
else
shift.y = -shift.y;
/* threshold strength to better handle collapsing segments */
l = FT_MIN( l_in, l_out );
q = out.x * in.y - out.y * in.x;
if ( orientation == FT_ORIENTATION_TRUETYPE )
q = -q;
if ( FT_MulDiv( xstrength, q, l ) < d )
shift.x = FT_MulDiv( shift.x, xstrength, d );
else
shift.x = FT_MulDiv( shift.x, l, q );
if ( FT_MulDiv( ystrength, q, l ) < d )
shift.y = FT_MulDiv( shift.y, ystrength, d );
else
shift.y = FT_MulDiv( shift.y, l, q );
}
else
shift.x = shift.y = 0;
outline->points[n].x = v_cur.x + xstrength + shift.x;
outline->points[n].y = v_cur.y + ystrength + shift.y;
in = out;
l_in = l_out;
v_cur = v_next;
}
first = last + 1;
}
return FT_Err_Ok;
}
/* documentation is in ftoutln.h */
FT_EXPORT_DEF( FT_Orientation )
FT_Outline_Get_Orientation( FT_Outline* outline )
{
FT_Vector* points;
FT_Vector v_prev, v_cur;
FT_Int c, n, first;
FT_Pos area = 0;
if ( !outline || outline->n_points <= 0 )
return FT_ORIENTATION_TRUETYPE;
/* We use the nonzero winding rule to find the orientation. */
/* Since glyph outlines behave much more `regular' than arbitrary */
/* cubic or quadratic curves, this test deals with the polygon */
/* only which is spanned up by the control points. */
points = outline->points;
first = 0;
for ( c = 0; c < outline->n_contours; c++ )
{
FT_Int last = outline->contours[c];
v_prev = points[last];
for ( n = first; n <= last; n++ )
{
v_cur = points[n];
area += ( v_cur.y - v_prev.y ) * ( v_cur.x + v_prev.x );
v_prev = v_cur;
}
first = last + 1;
}
if ( area > 0 )
return FT_ORIENTATION_POSTSCRIPT;
else if ( area < 0 )
return FT_ORIENTATION_TRUETYPE;
else
return FT_ORIENTATION_NONE;
}
/* END */
/***************************************************************************/
/* */
/* ftrfork.c */
/* */
/* Embedded resource forks accessor (body). */
/* */
/* Copyright 2004, 2005, 2006, 2007, 2008, 2009, 2010 by */
/* Masatake YAMATO and Redhat K.K. */
/* */
/* FT_Raccess_Get_HeaderInfo() and raccess_guess_darwin_hfsplus() are */
/* derived from ftobjs.c. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* Development of the code in this file is support of */
/* Information-technology Promotion Agency, Japan. */
/***************************************************************************/
#undef FT_COMPONENT
#define FT_COMPONENT trace_raccess
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** Resource fork directory access ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
FT_BASE_DEF( FT_Error )
FT_Raccess_Get_HeaderInfo( FT_Library library,
FT_Stream stream,
FT_Long rfork_offset,
FT_Long *map_offset,
FT_Long *rdata_pos )
{
FT_Error error;
unsigned char head[16], head2[16];
FT_Long map_pos, rdata_len;
int allzeros, allmatch, i;
FT_Long type_list;
FT_UNUSED( library );
error = FT_Stream_Seek( stream, rfork_offset );
if ( error )
return error;
error = FT_Stream_Read( stream, (FT_Byte *)head, 16 );
if ( error )
return error;
*rdata_pos = rfork_offset + ( ( head[0] << 24 ) |
( head[1] << 16 ) |
( head[2] << 8 ) |
head[3] );
map_pos = rfork_offset + ( ( head[4] << 24 ) |
( head[5] << 16 ) |
( head[6] << 8 ) |
head[7] );
rdata_len = ( head[ 8] << 24 ) |
( head[ 9] << 16 ) |
( head[10] << 8 ) |
head[11];
/* map_len = head[12] .. head[15] */
if ( *rdata_pos + rdata_len != map_pos || map_pos == rfork_offset )
return FT_Err_Unknown_File_Format;
error = FT_Stream_Seek( stream, map_pos );
if ( error )
return error;
/* make it be different */
head2[15] = (FT_Byte)( head[15] + 1 );
error = FT_Stream_Read( stream, (FT_Byte*)head2, 16 );
if ( error )
return error;
allzeros = 1;
allmatch = 1;
for ( i = 0; i < 16; ++i )
{
if ( head2[i] != 0 )
allzeros = 0;
if ( head2[i] != head[i] )
allmatch = 0;
}
if ( !allzeros && !allmatch )
return FT_Err_Unknown_File_Format;
/* If we have reached this point then it is probably a mac resource */
/* file. Now, does it contain any interesting resources? */
/* Skip handle to next resource map, the file resource number, and */
/* attributes. */
/* skip handle to next resource map */
(void)FT_STREAM_SKIP( 4
/* skip file resource number */
+ 2
/* skip attributes */
+ 2 );
if ( FT_READ_USHORT( type_list ) )
return error;
if ( type_list == -1 )
return FT_Err_Unknown_File_Format;
error = FT_Stream_Seek( stream, map_pos + type_list );
if ( error )
return error;
*map_offset = map_pos + type_list;
return FT_Err_Ok;
}
static int
ft_raccess_sort_ref_by_id( FT_RFork_Ref* a,
FT_RFork_Ref* b )
{
if ( a->res_id < b->res_id )
return -1;
else if ( a->res_id > b->res_id )
return 1;
else
return 0;
}
FT_BASE_DEF( FT_Error )
FT_Raccess_Get_DataOffsets( FT_Library library,
FT_Stream stream,
FT_Long map_offset,
FT_Long rdata_pos,
FT_Long tag,
FT_Long **offsets,
FT_Long *count )
{
FT_Error error;
int i, j, cnt, subcnt;
FT_Long tag_internal, rpos;
FT_Memory memory = library->memory;
FT_Long temp;
FT_Long *offsets_internal = NULL;
FT_RFork_Ref *ref = NULL;
error = FT_Stream_Seek( stream, map_offset );
if ( error )
return error;
if ( FT_READ_USHORT( cnt ) )
return error;
cnt++;
for ( i = 0; i < cnt; ++i )
{
if ( FT_READ_LONG( tag_internal ) ||
FT_READ_USHORT( subcnt ) ||
FT_READ_USHORT( rpos ) )
return error;
FT_TRACE2(( "Resource tags: %c%c%c%c\n",
(char)( 0xff & ( tag_internal >> 24 ) ),
(char)( 0xff & ( tag_internal >> 16 ) ),
(char)( 0xff & ( tag_internal >> 8 ) ),
(char)( 0xff & ( tag_internal >> 0 ) ) ));
if ( tag_internal == tag )
{
*count = subcnt + 1;
rpos += map_offset;
error = FT_Stream_Seek( stream, rpos );
if ( error )
return error;
if ( FT_NEW_ARRAY( ref, *count ) )
return error;
for ( j = 0; j < *count; ++j )
{
if ( FT_READ_USHORT( ref[j].res_id ) )
goto Exit;
/* resource name */
if ( FT_STREAM_SKIP( 2 ) )
goto Exit;
if ( FT_READ_LONG( temp ) )
goto Exit;
/* mbz */
if ( FT_STREAM_SKIP( 4 ) )
goto Exit;
ref[j].offset = temp & 0xFFFFFFL;
}
ft_qsort( ref, *count, sizeof ( FT_RFork_Ref ),
( int(*)(const void*, const void*) )
ft_raccess_sort_ref_by_id );
if ( FT_NEW_ARRAY( offsets_internal, *count ) )
goto Exit;
/* XXX: duplicated reference ID,
* gap between reference IDs are acceptable?
* further investigation on Apple implementation is needed.
*/
for ( j = 0; j < *count; ++j )
offsets_internal[j] = rdata_pos + ref[j].offset;
*offsets = offsets_internal;
error = FT_Err_Ok;
Exit:
FT_FREE( ref );
return error;
}
}
return FT_Err_Cannot_Open_Resource;
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** Guessing functions ****/
/**** ****/
/**** When you add a new guessing function, ****/
/**** update FT_RACCESS_N_RULES in ftrfork.h. ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
static FT_Error
raccess_guess_apple_double( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
static FT_Error
raccess_guess_apple_single( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
static FT_Error
raccess_guess_darwin_ufs_export( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
static FT_Error
raccess_guess_darwin_newvfs( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
static FT_Error
raccess_guess_darwin_hfsplus( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
static FT_Error
raccess_guess_vfat( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
static FT_Error
raccess_guess_linux_cap( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
static FT_Error
raccess_guess_linux_double( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
static FT_Error
raccess_guess_linux_netatalk( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset );
CONST_FT_RFORK_RULE_ARRAY_BEGIN(ft_raccess_guess_table,
ft_raccess_guess_rec)
CONST_FT_RFORK_RULE_ARRAY_ENTRY(apple_double, apple_double)
CONST_FT_RFORK_RULE_ARRAY_ENTRY(apple_single, apple_single)
CONST_FT_RFORK_RULE_ARRAY_ENTRY(darwin_ufs_export, darwin_ufs_export)
CONST_FT_RFORK_RULE_ARRAY_ENTRY(darwin_newvfs, darwin_newvfs)
CONST_FT_RFORK_RULE_ARRAY_ENTRY(darwin_hfsplus, darwin_hfsplus)
CONST_FT_RFORK_RULE_ARRAY_ENTRY(vfat, vfat)
CONST_FT_RFORK_RULE_ARRAY_ENTRY(linux_cap, linux_cap)
CONST_FT_RFORK_RULE_ARRAY_ENTRY(linux_double, linux_double)
CONST_FT_RFORK_RULE_ARRAY_ENTRY(linux_netatalk, linux_netatalk)
CONST_FT_RFORK_RULE_ARRAY_END
/*************************************************************************/
/**** ****/
/**** Helper functions ****/
/**** ****/
/*************************************************************************/
static FT_Error
raccess_guess_apple_generic( FT_Library library,
FT_Stream stream,
char *base_file_name,
FT_Int32 magic,
FT_Long *result_offset );
static FT_Error
raccess_guess_linux_double_from_file_name( FT_Library library,
char * file_name,
FT_Long *result_offset );
static char *
raccess_make_file_name( FT_Memory memory,
const char *original_name,
const char *insertion );
FT_BASE_DEF( void )
FT_Raccess_Guess( FT_Library library,
FT_Stream stream,
char* base_name,
char **new_names,
FT_Long *offsets,
FT_Error *errors )
{
FT_Int i;
for ( i = 0; i < FT_RACCESS_N_RULES; i++ )
{
new_names[i] = NULL;
if ( NULL != stream )
errors[i] = FT_Stream_Seek( stream, 0 );
else
errors[i] = FT_Err_Ok;
if ( errors[i] )
continue ;
errors[i] = (FT_RACCESS_GUESS_TABLE_GET[i].func)( library,
stream, base_name,
&(new_names[i]),
&(offsets[i]) );
}
return;
}
#ifndef FT_MACINTOSH
static FT_RFork_Rule
raccess_get_rule_type_from_rule_index( FT_Library library,
FT_UInt rule_index )
{
FT_UNUSED( library );
if ( rule_index >= FT_RACCESS_N_RULES )
return FT_RFork_Rule_invalid;
return FT_RACCESS_GUESS_TABLE_GET[rule_index].type;
}
/*
* For this function, refer ftbase.h.
*/
FT_LOCAL_DEF( FT_Bool )
ft_raccess_rule_by_darwin_vfs( FT_Library library,
FT_UInt rule_index )
{
switch( raccess_get_rule_type_from_rule_index( library, rule_index ) )
{
case FT_RFork_Rule_darwin_newvfs:
case FT_RFork_Rule_darwin_hfsplus:
return TRUE;
default:
return FALSE;
}
}
#endif
static FT_Error
raccess_guess_apple_double( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset )
{
FT_Int32 magic = ( 0x00 << 24 ) |
( 0x05 << 16 ) |
( 0x16 << 8 ) |
0x07;
*result_file_name = NULL;
if ( NULL == stream )
return FT_Err_Cannot_Open_Stream;
return raccess_guess_apple_generic( library, stream, base_file_name,
magic, result_offset );
}
static FT_Error
raccess_guess_apple_single( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset )
{
FT_Int32 magic = ( 0x00 << 24 ) |
( 0x05 << 16 ) |
( 0x16 << 8 ) |
0x00;
*result_file_name = NULL;
if ( NULL == stream )
return FT_Err_Cannot_Open_Stream;
return raccess_guess_apple_generic( library, stream, base_file_name,
magic, result_offset );
}
static FT_Error
raccess_guess_darwin_ufs_export( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset )
{
char* newpath;
FT_Error error;
FT_Memory memory;
FT_UNUSED( stream );
memory = library->memory;
newpath = raccess_make_file_name( memory, base_file_name, "._" );
if ( !newpath )
return FT_Err_Out_Of_Memory;
error = raccess_guess_linux_double_from_file_name( library, newpath,
result_offset );
if ( !error )
*result_file_name = newpath;
else
FT_FREE( newpath );
return error;
}
static FT_Error
raccess_guess_darwin_hfsplus( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset )
{
/*
Only meaningful on systems with hfs+ drivers (or Macs).
*/
FT_Error error;
char* newpath = NULL;
FT_Memory memory;
FT_Long base_file_len = ft_strlen( base_file_name );
FT_UNUSED( stream );
memory = library->memory;
if ( base_file_len + 6 > FT_INT_MAX )
return FT_Err_Array_Too_Large;
if ( FT_ALLOC( newpath, base_file_len + 6 ) )
return error;
FT_MEM_COPY( newpath, base_file_name, base_file_len );
FT_MEM_COPY( newpath + base_file_len, "/rsrc", 6 );
*result_file_name = newpath;
*result_offset = 0;
return FT_Err_Ok;
}
static FT_Error
raccess_guess_darwin_newvfs( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset )
{
/*
Only meaningful on systems with Mac OS X (> 10.1).
*/
FT_Error error;
char* newpath = NULL;
FT_Memory memory;
FT_Long base_file_len = ft_strlen( base_file_name );
FT_UNUSED( stream );
memory = library->memory;
if ( base_file_len + 18 > FT_INT_MAX )
return FT_Err_Array_Too_Large;
if ( FT_ALLOC( newpath, base_file_len + 18 ) )
return error;
FT_MEM_COPY( newpath, base_file_name, base_file_len );
FT_MEM_COPY( newpath + base_file_len, "/..namedfork/rsrc", 18 );
*result_file_name = newpath;
*result_offset = 0;
return FT_Err_Ok;
}
static FT_Error
raccess_guess_vfat( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset )
{
char* newpath;
FT_Memory memory;
FT_UNUSED( stream );
memory = library->memory;
newpath = raccess_make_file_name( memory, base_file_name,
"resource.frk/" );
if ( !newpath )
return FT_Err_Out_Of_Memory;
*result_file_name = newpath;
*result_offset = 0;
return FT_Err_Ok;
}
static FT_Error
raccess_guess_linux_cap( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset )
{
char* newpath;
FT_Memory memory;
FT_UNUSED( stream );
memory = library->memory;
newpath = raccess_make_file_name( memory, base_file_name, ".resource/" );
if ( !newpath )
return FT_Err_Out_Of_Memory;
*result_file_name = newpath;
*result_offset = 0;
return FT_Err_Ok;
}
static FT_Error
raccess_guess_linux_double( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset )
{
char* newpath;
FT_Error error;
FT_Memory memory;
FT_UNUSED( stream );
memory = library->memory;
newpath = raccess_make_file_name( memory, base_file_name, "%" );
if ( !newpath )
return FT_Err_Out_Of_Memory;
error = raccess_guess_linux_double_from_file_name( library, newpath,
result_offset );
if ( !error )
*result_file_name = newpath;
else
FT_FREE( newpath );
return error;
}
static FT_Error
raccess_guess_linux_netatalk( FT_Library library,
FT_Stream stream,
char *base_file_name,
char **result_file_name,
FT_Long *result_offset )
{
char* newpath;
FT_Error error;
FT_Memory memory;
FT_UNUSED( stream );
memory = library->memory;
newpath = raccess_make_file_name( memory, base_file_name,
".AppleDouble/" );
if ( !newpath )
return FT_Err_Out_Of_Memory;
error = raccess_guess_linux_double_from_file_name( library, newpath,
result_offset );
if ( !error )
*result_file_name = newpath;
else
FT_FREE( newpath );
return error;
}
static FT_Error
raccess_guess_apple_generic( FT_Library library,
FT_Stream stream,
char *base_file_name,
FT_Int32 magic,
FT_Long *result_offset )
{
FT_Int32 magic_from_stream;
FT_Error error;
FT_Int32 version_number = 0;
FT_UShort n_of_entries;
int i;
FT_UInt32 entry_id, entry_offset, entry_length = 0;
const FT_UInt32 resource_fork_entry_id = 0x2;
FT_UNUSED( library );
FT_UNUSED( base_file_name );
FT_UNUSED( version_number );
FT_UNUSED( entry_length );
if ( FT_READ_LONG( magic_from_stream ) )
return error;
if ( magic_from_stream != magic )
return FT_Err_Unknown_File_Format;
if ( FT_READ_LONG( version_number ) )
return error;
/* filler */
error = FT_Stream_Skip( stream, 16 );
if ( error )
return error;
if ( FT_READ_USHORT( n_of_entries ) )
return error;
if ( n_of_entries == 0 )
return FT_Err_Unknown_File_Format;
for ( i = 0; i < n_of_entries; i++ )
{
if ( FT_READ_LONG( entry_id ) )
return error;
if ( entry_id == resource_fork_entry_id )
{
if ( FT_READ_LONG( entry_offset ) ||
FT_READ_LONG( entry_length ) )
continue;
*result_offset = entry_offset;
return FT_Err_Ok;
}
else
{
/* offset + length */
error = FT_Stream_Skip( stream, 4 + 4 );
if ( error )
return error;
}
}
return FT_Err_Unknown_File_Format;
}
static FT_Error
raccess_guess_linux_double_from_file_name( FT_Library library,
char *file_name,
FT_Long *result_offset )
{
FT_Open_Args args2;
FT_Stream stream2;
char * nouse = NULL;
FT_Error error;
args2.flags = FT_OPEN_PATHNAME;
args2.pathname = file_name;
error = FT_Stream_New( library, &args2, &stream2 );
if ( error )
return error;
error = raccess_guess_apple_double( library, stream2, file_name,
&nouse, result_offset );
FT_Stream_Free( stream2, 0 );
return error;
}
static char*
raccess_make_file_name( FT_Memory memory,
const char *original_name,
const char *insertion )
{
char* new_name = NULL;
const char* tmp;
const char* slash;
size_t new_length;
FT_Error error = FT_Err_Ok;
FT_UNUSED( error );
new_length = ft_strlen( original_name ) + ft_strlen( insertion );
if ( FT_ALLOC( new_name, new_length + 1 ) )
return NULL;
tmp = ft_strrchr( original_name, '/' );
if ( tmp )
{
ft_strncpy( new_name, original_name, tmp - original_name + 1 );
new_name[tmp - original_name + 1] = '\0';
slash = tmp + 1;
}
else
{
slash = original_name;
new_name[0] = '\0';
}
ft_strcat( new_name, insertion );
ft_strcat( new_name, slash );
return new_name;
}
/* END */
/***************************************************************************/
/* */
/* ftsnames.c */
/* */
/* Simple interface to access SFNT name tables (which are used */
/* to hold font names, copyright info, notices, etc.) (body). */
/* */
/* This is _not_ used to retrieve glyph names! */
/* */
/* Copyright 1996-2001, 2002, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftsnames.h */
/* */
/* Simple interface to access SFNT name tables (which are used */
/* to hold font names, copyright info, notices, etc.) (specification). */
/* */
/* This is _not_ used to retrieve glyph names! */
/* */
/* Copyright 1996-2001, 2002, 2003, 2006, 2009, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef __FT_SFNT_NAMES_H__
#define __FT_SFNT_NAMES_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* sfnt_names */
/* */
/* <Title> */
/* SFNT Names */
/* */
/* <Abstract> */
/* Access the names embedded in TrueType and OpenType files. */
/* */
/* <Description> */
/* The TrueType and OpenType specifications allow the inclusion of */
/* a special `names table' in font files. This table contains */
/* textual (and internationalized) information regarding the font, */
/* like family name, copyright, version, etc. */
/* */
/* The definitions below are used to access them if available. */
/* */
/* Note that this has nothing to do with glyph names! */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* FT_SfntName */
/* */
/* <Description> */
/* A structure used to model an SFNT `name' table entry. */
/* */
/* <Fields> */
/* platform_id :: The platform ID for `string'. */
/* */
/* encoding_id :: The encoding ID for `string'. */
/* */
/* language_id :: The language ID for `string'. */
/* */
/* name_id :: An identifier for `string'. */
/* */
/* string :: The `name' string. Note that its format differs */
/* depending on the (platform,encoding) pair. It can */
/* be a Pascal String, a UTF-16 one, etc. */
/* */
/* Generally speaking, the string is not */
/* zero-terminated. Please refer to the TrueType */
/* specification for details. */
/* */
/* string_len :: The length of `string' in bytes. */
/* */
/* <Note> */
/* Possible values for `platform_id', `encoding_id', `language_id', */
/* and `name_id' are given in the file `ttnameid.h'. For details */
/* please refer to the TrueType or OpenType specification. */
/* */
/* See also @TT_PLATFORM_XXX, @TT_APPLE_ID_XXX, @TT_MAC_ID_XXX, */
/* @TT_ISO_ID_XXX, and @TT_MS_ID_XXX. */
/* */
typedef struct FT_SfntName_
{
FT_UShort platform_id;
FT_UShort encoding_id;
FT_UShort language_id;
FT_UShort name_id;
/* this string is *not* null-terminated! */
FT_Byte* string;
/* in bytes */
FT_UInt string_len;
} FT_SfntName;
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Sfnt_Name_Count */
/* */
/* <Description> */
/* Retrieve the number of name strings in the SFNT `name' table. */
/* */
/* <Input> */
/* face :: A handle to the source face. */
/* */
/* <Return> */
/* The number of strings in the `name' table. */
/* */
FT_EXPORT( FT_UInt )
FT_Get_Sfnt_Name_Count( FT_Face face );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_Sfnt_Name */
/* */
/* <Description> */
/* Retrieve a string of the SFNT `name' table for a given index. */
/* */
/* <Input> */
/* face :: A handle to the source face. */
/* */
/* idx :: The index of the `name' string. */
/* */
/* <Output> */
/* aname :: The indexed @FT_SfntName structure. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* The `string' array returned in the `aname' structure is not */
/* null-terminated. The application should deallocate it if it is no */
/* longer in use. */
/* */
/* Use @FT_Get_Sfnt_Name_Count to get the total number of available */
/* `name' table entries, then do a loop until you get the right */
/* platform, encoding, and name ID. */
/* */
FT_EXPORT( FT_Error )
FT_Get_Sfnt_Name( FT_Face face,
FT_UInt idx,
FT_SfntName *aname );
/***************************************************************************
*
* @constant:
* FT_PARAM_TAG_IGNORE_PREFERRED_FAMILY
*
* @description:
* A constant used as the tag of @FT_Parameter structures to make
* FT_Open_Face() ignore preferred family subfamily names in `name'
* table since OpenType version 1.4. For backwards compatibility with
* legacy systems which has 4-face-per-family restriction.
*
*/
#define FT_PARAM_TAG_IGNORE_PREFERRED_FAMILY FT_MAKE_TAG( 'i', 'g', 'p', 'f' )
/***************************************************************************
*
* @constant:
* FT_PARAM_TAG_IGNORE_PREFERRED_SUBFAMILY
*
* @description:
* A constant used as the tag of @FT_Parameter structures to make
* FT_Open_Face() ignore preferred subfamily names in `name' table since
* OpenType version 1.4. For backwards compatibility with legacy
* systems which has 4-face-per-family restriction.
*
*/
#define FT_PARAM_TAG_IGNORE_PREFERRED_SUBFAMILY FT_MAKE_TAG( 'i', 'g', 'p', 's' )
/* */
FT_END_HEADER
/* __FT_SFNT_NAMES_H__ */
#endif
/* END */
/* documentation is in ftsnames.h */
FT_EXPORT_DEF( FT_UInt )
FT_Get_Sfnt_Name_Count( FT_Face face )
{
return ( face && FT_IS_SFNT( face ) ) ? ((TT_Face)face)->num_names : 0;
}
/* documentation is in ftsnames.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_Sfnt_Name( FT_Face face,
FT_UInt idx,
FT_SfntName *aname )
{
FT_Error error = FT_Err_Invalid_Argument;
if ( aname && face && FT_IS_SFNT( face ) )
{
TT_Face ttface = (TT_Face)face;
if ( idx < (FT_UInt)ttface->num_names )
{
TT_NameEntryRec* entry = ttface->name_table.names + idx;
/* load name on demand */
if ( entry->stringLength > 0 && entry->string == NULL )
{
FT_Memory memory = face->memory;
FT_Stream stream = face->stream;
if ( FT_NEW_ARRAY ( entry->string, entry->stringLength ) ||
FT_STREAM_SEEK( entry->stringOffset ) ||
FT_STREAM_READ( entry->string, entry->stringLength ) )
{
FT_FREE( entry->string );
entry->stringLength = 0;
}
}
aname->platform_id = entry->platformID;
aname->encoding_id = entry->encodingID;
aname->language_id = entry->languageID;
aname->name_id = entry->nameID;
aname->string = (FT_Byte*)entry->string;
aname->string_len = entry->stringLength;
error = FT_Err_Ok;
}
}
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftstream.c */
/* */
/* I/O stream support (body). */
/* */
/* Copyright 2000-2002, 2004-2006, 2008-2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_stream
FT_BASE_DEF( void )
FT_Stream_OpenMemory( FT_Stream stream,
const FT_Byte* base,
FT_ULong size )
{
stream->base = (FT_Byte*) base;
stream->size = size;
stream->pos = 0;
stream->cursor = 0;
stream->read = 0;
stream->close = 0;
}
FT_BASE_DEF( void )
FT_Stream_Close( FT_Stream stream )
{
if ( stream && stream->close )
stream->close( stream );
}
FT_BASE_DEF( FT_Error )
FT_Stream_Seek( FT_Stream stream,
FT_ULong pos )
{
FT_Error error = FT_Err_Ok;
if ( stream->read )
{
if ( stream->read( stream, pos, 0, 0 ) )
{
FT_ERROR(( "FT_Stream_Seek:"
" invalid i/o; pos = 0x%lx, size = 0x%lx\n",
pos, stream->size ));
error = FT_Err_Invalid_Stream_Operation;
}
}
/* note that seeking to the first position after the file is valid */
else if ( pos > stream->size )
{
FT_ERROR(( "FT_Stream_Seek:"
" invalid i/o; pos = 0x%lx, size = 0x%lx\n",
pos, stream->size ));
error = FT_Err_Invalid_Stream_Operation;
}
if ( !error )
stream->pos = pos;
return error;
}
FT_BASE_DEF( FT_Error )
FT_Stream_Skip( FT_Stream stream,
FT_Long distance )
{
if ( distance < 0 )
return FT_Err_Invalid_Stream_Operation;
return FT_Stream_Seek( stream, (FT_ULong)( stream->pos + distance ) );
}
FT_BASE_DEF( FT_Long )
FT_Stream_Pos( FT_Stream stream )
{
return stream->pos;
}
FT_BASE_DEF( FT_Error )
FT_Stream_Read( FT_Stream stream,
FT_Byte* buffer,
FT_ULong count )
{
return FT_Stream_ReadAt( stream, stream->pos, buffer, count );
}
FT_BASE_DEF( FT_Error )
FT_Stream_ReadAt( FT_Stream stream,
FT_ULong pos,
FT_Byte* buffer,
FT_ULong count )
{
FT_Error error = FT_Err_Ok;
FT_ULong read_bytes;
if ( pos >= stream->size )
{
FT_ERROR(( "FT_Stream_ReadAt:"
" invalid i/o; pos = 0x%lx, size = 0x%lx\n",
pos, stream->size ));
return FT_Err_Invalid_Stream_Operation;
}
if ( stream->read )
read_bytes = stream->read( stream, pos, buffer, count );
else
{
read_bytes = stream->size - pos;
if ( read_bytes > count )
read_bytes = count;
FT_MEM_COPY( buffer, stream->base + pos, read_bytes );
}
stream->pos = pos + read_bytes;
if ( read_bytes < count )
{
FT_ERROR(( "FT_Stream_ReadAt:"
" invalid read; expected %lu bytes, got %lu\n",
count, read_bytes ));
error = FT_Err_Invalid_Stream_Operation;
}
return error;
}
FT_BASE_DEF( FT_ULong )
FT_Stream_TryRead( FT_Stream stream,
FT_Byte* buffer,
FT_ULong count )
{
FT_ULong read_bytes = 0;
if ( stream->pos >= stream->size )
goto Exit;
if ( stream->read )
read_bytes = stream->read( stream, stream->pos, buffer, count );
else
{
read_bytes = stream->size - stream->pos;
if ( read_bytes > count )
read_bytes = count;
FT_MEM_COPY( buffer, stream->base + stream->pos, read_bytes );
}
stream->pos += read_bytes;
Exit:
return read_bytes;
}
FT_BASE_DEF( FT_Error )
FT_Stream_ExtractFrame( FT_Stream stream,
FT_ULong count,
FT_Byte** pbytes )
{
FT_Error error;
error = FT_Stream_EnterFrame( stream, count );
if ( !error )
{
*pbytes = (FT_Byte*)stream->cursor;
/* equivalent to FT_Stream_ExitFrame(), with no memory block release */
stream->cursor = 0;
stream->limit = 0;
}
return error;
}
FT_BASE_DEF( void )
FT_Stream_ReleaseFrame( FT_Stream stream,
FT_Byte** pbytes )
{
if ( stream && stream->read )
{
FT_Memory memory = stream->memory;
FT_FREE( *pbytes );
}
*pbytes = 0;
}
FT_BASE_DEF( FT_Error )
FT_Stream_EnterFrame( FT_Stream stream,
FT_ULong count )
{
FT_Error error = FT_Err_Ok;
FT_ULong read_bytes;
/* check for nested frame access */
FT_ASSERT( stream && stream->cursor == 0 );
if ( stream->read )
{
/* allocate the frame in memory */
FT_Memory memory = stream->memory;
/* simple sanity check */
if ( count > stream->size )
{
FT_ERROR(( "FT_Stream_EnterFrame:"
" frame size (%lu) larger than stream size (%lu)\n",
count, stream->size ));
error = FT_Err_Invalid_Stream_Operation;
goto Exit;
}
if ( FT_QALLOC( stream->base, count ) )
goto Exit;
/* read it */
read_bytes = stream->read( stream, stream->pos,
stream->base, count );
if ( read_bytes < count )
{
FT_ERROR(( "FT_Stream_EnterFrame:"
" invalid read; expected %lu bytes, got %lu\n",
count, read_bytes ));
FT_FREE( stream->base );
error = FT_Err_Invalid_Stream_Operation;
}
stream->cursor = stream->base;
stream->limit = stream->cursor + count;
stream->pos += read_bytes;
}
else
{
/* check current and new position */
if ( stream->pos >= stream->size ||
stream->size - stream->pos < count )
{
FT_ERROR(( "FT_Stream_EnterFrame:"
" invalid i/o; pos = 0x%lx, count = %lu, size = 0x%lx\n",
stream->pos, count, stream->size ));
error = FT_Err_Invalid_Stream_Operation;
goto Exit;
}
/* set cursor */
stream->cursor = stream->base + stream->pos;
stream->limit = stream->cursor + count;
stream->pos += count;
}
Exit:
return error;
}
FT_BASE_DEF( void )
FT_Stream_ExitFrame( FT_Stream stream )
{
/* IMPORTANT: The assertion stream->cursor != 0 was removed, given */
/* that it is possible to access a frame of length 0 in */
/* some weird fonts (usually, when accessing an array of */
/* 0 records, like in some strange kern tables). */
/* */
/* In this case, the loader code handles the 0-length table */
/* gracefully; however, stream.cursor is really set to 0 by the */
/* FT_Stream_EnterFrame() call, and this is not an error. */
/* */
FT_ASSERT( stream );
if ( stream->read )
{
FT_Memory memory = stream->memory;
FT_FREE( stream->base );
}
stream->cursor = 0;
stream->limit = 0;
}
FT_BASE_DEF( FT_Char )
FT_Stream_GetChar( FT_Stream stream )
{
FT_Char result;
FT_ASSERT( stream && stream->cursor );
result = 0;
if ( stream->cursor < stream->limit )
result = *stream->cursor++;
return result;
}
FT_BASE_DEF( FT_UShort )
FT_Stream_GetUShort( FT_Stream stream )
{
FT_Byte* p;
FT_Short result;
FT_ASSERT( stream && stream->cursor );
result = 0;
p = stream->cursor;
if ( p + 1 < stream->limit )
result = FT_NEXT_USHORT( p );
stream->cursor = p;
return result;
}
FT_BASE_DEF( FT_UShort )
FT_Stream_GetUShortLE( FT_Stream stream )
{
FT_Byte* p;
FT_Short result;
FT_ASSERT( stream && stream->cursor );
result = 0;
p = stream->cursor;
if ( p + 1 < stream->limit )
result = FT_NEXT_USHORT_LE( p );
stream->cursor = p;
return result;
}
FT_BASE_DEF( FT_ULong )
FT_Stream_GetUOffset( FT_Stream stream )
{
FT_Byte* p;
FT_Long result;
FT_ASSERT( stream && stream->cursor );
result = 0;
p = stream->cursor;
if ( p + 2 < stream->limit )
result = FT_NEXT_UOFF3( p );
stream->cursor = p;
return result;
}
FT_BASE_DEF( FT_ULong )
FT_Stream_GetULong( FT_Stream stream )
{
FT_Byte* p;
FT_Long result;
FT_ASSERT( stream && stream->cursor );
result = 0;
p = stream->cursor;
if ( p + 3 < stream->limit )
result = FT_NEXT_ULONG( p );
stream->cursor = p;
return result;
}
FT_BASE_DEF( FT_ULong )
FT_Stream_GetULongLE( FT_Stream stream )
{
FT_Byte* p;
FT_Long result;
FT_ASSERT( stream && stream->cursor );
result = 0;
p = stream->cursor;
if ( p + 3 < stream->limit )
result = FT_NEXT_ULONG_LE( p );
stream->cursor = p;
return result;
}
FT_BASE_DEF( FT_Char )
FT_Stream_ReadChar( FT_Stream stream,
FT_Error* error )
{
FT_Byte result = 0;
FT_ASSERT( stream );
*error = FT_Err_Ok;
if ( stream->read )
{
if ( stream->read( stream, stream->pos, &result, 1L ) != 1L )
goto Fail;
}
else
{
if ( stream->pos < stream->size )
result = stream->base[stream->pos];
else
goto Fail;
}
stream->pos++;
return result;
Fail:
*error = FT_Err_Invalid_Stream_Operation;
FT_ERROR(( "FT_Stream_ReadChar:"
" invalid i/o; pos = 0x%lx, size = 0x%lx\n",
stream->pos, stream->size ));
return 0;
}
FT_BASE_DEF( FT_UShort )
FT_Stream_ReadUShort( FT_Stream stream,
FT_Error* error )
{
FT_Byte reads[2];
FT_Byte* p = 0;
FT_Short result = 0;
FT_ASSERT( stream );
*error = FT_Err_Ok;
if ( stream->pos + 1 < stream->size )
{
if ( stream->read )
{
if ( stream->read( stream, stream->pos, reads, 2L ) != 2L )
goto Fail;
p = reads;
}
else
{
p = stream->base + stream->pos;
}
if ( p )
result = FT_NEXT_USHORT( p );
}
else
goto Fail;
stream->pos += 2;
return result;
Fail:
*error = FT_Err_Invalid_Stream_Operation;
FT_ERROR(( "FT_Stream_ReadUShort:"
" invalid i/o; pos = 0x%lx, size = 0x%lx\n",
stream->pos, stream->size ));
return 0;
}
FT_BASE_DEF( FT_UShort )
FT_Stream_ReadUShortLE( FT_Stream stream,
FT_Error* error )
{
FT_Byte reads[2];
FT_Byte* p = 0;
FT_Short result = 0;
FT_ASSERT( stream );
*error = FT_Err_Ok;
if ( stream->pos + 1 < stream->size )
{
if ( stream->read )
{
if ( stream->read( stream, stream->pos, reads, 2L ) != 2L )
goto Fail;
p = reads;
}
else
{
p = stream->base + stream->pos;
}
if ( p )
result = FT_NEXT_USHORT_LE( p );
}
else
goto Fail;
stream->pos += 2;
return result;
Fail:
*error = FT_Err_Invalid_Stream_Operation;
FT_ERROR(( "FT_Stream_ReadUShortLE:"
" invalid i/o; pos = 0x%lx, size = 0x%lx\n",
stream->pos, stream->size ));
return 0;
}
FT_BASE_DEF( FT_ULong )
FT_Stream_ReadUOffset( FT_Stream stream,
FT_Error* error )
{
FT_Byte reads[3];
FT_Byte* p = 0;
FT_Long result = 0;
FT_ASSERT( stream );
*error = FT_Err_Ok;
if ( stream->pos + 2 < stream->size )
{
if ( stream->read )
{
if (stream->read( stream, stream->pos, reads, 3L ) != 3L )
goto Fail;
p = reads;
}
else
{
p = stream->base + stream->pos;
}
if ( p )
result = FT_NEXT_UOFF3( p );
}
else
goto Fail;
stream->pos += 3;
return result;
Fail:
*error = FT_Err_Invalid_Stream_Operation;
FT_ERROR(( "FT_Stream_ReadUOffset:"
" invalid i/o; pos = 0x%lx, size = 0x%lx\n",
stream->pos, stream->size ));
return 0;
}
FT_BASE_DEF( FT_ULong )
FT_Stream_ReadULong( FT_Stream stream,
FT_Error* error )
{
FT_Byte reads[4];
FT_Byte* p = 0;
FT_Long result = 0;
FT_ASSERT( stream );
*error = FT_Err_Ok;
if ( stream->pos + 3 < stream->size )
{
if ( stream->read )
{
if ( stream->read( stream, stream->pos, reads, 4L ) != 4L )
goto Fail;
p = reads;
}
else
{
p = stream->base + stream->pos;
}
if ( p )
result = FT_NEXT_ULONG( p );
}
else
goto Fail;
stream->pos += 4;
return result;
Fail:
*error = FT_Err_Invalid_Stream_Operation;
FT_ERROR(( "FT_Stream_ReadULong:"
" invalid i/o; pos = 0x%lx, size = 0x%lx\n",
stream->pos, stream->size ));
return 0;
}
FT_BASE_DEF( FT_ULong )
FT_Stream_ReadULongLE( FT_Stream stream,
FT_Error* error )
{
FT_Byte reads[4];
FT_Byte* p = 0;
FT_Long result = 0;
FT_ASSERT( stream );
*error = FT_Err_Ok;
if ( stream->pos + 3 < stream->size )
{
if ( stream->read )
{
if ( stream->read( stream, stream->pos, reads, 4L ) != 4L )
goto Fail;
p = reads;
}
else
{
p = stream->base + stream->pos;
}
if ( p )
result = FT_NEXT_ULONG_LE( p );
}
else
goto Fail;
stream->pos += 4;
return result;
Fail:
*error = FT_Err_Invalid_Stream_Operation;
FT_ERROR(( "FT_Stream_ReadULongLE:"
" invalid i/o; pos = 0x%lx, size = 0x%lx\n",
stream->pos, stream->size ));
return 0;
}
FT_BASE_DEF( FT_Error )
FT_Stream_ReadFields( FT_Stream stream,
const FT_Frame_Field* fields,
void* structure )
{
FT_Error error;
FT_Bool frame_accessed = 0;
FT_Byte* cursor;
if ( !fields || !stream )
return FT_Err_Invalid_Argument;
cursor = stream->cursor;
error = FT_Err_Ok;
do
{
FT_ULong value;
FT_Int sign_shift;
FT_Byte* p;
switch ( fields->value )
{
/* access a new frame */
case ft_frame_start:
error = FT_Stream_EnterFrame( stream, fields->offset );
if ( error )
goto Exit;
frame_accessed = 1;
cursor = stream->cursor;
fields++;
/* loop! */
continue;
/* read a byte sequence */
case ft_frame_bytes:
/* skip some bytes */
case ft_frame_skip:
{
FT_UInt len = fields->size;
if ( cursor + len > stream->limit )
{
error = FT_Err_Invalid_Stream_Operation;
goto Exit;
}
if ( fields->value == ft_frame_bytes )
{
p = (FT_Byte*)structure + fields->offset;
FT_MEM_COPY( p, cursor, len );
}
cursor += len;
fields++;
continue;
}
case ft_frame_byte:
/* read a single byte */
case ft_frame_schar:
value = FT_NEXT_BYTE(cursor);
sign_shift = 24;
break;
case ft_frame_short_be:
/* read a 2-byte big-endian short */
case ft_frame_ushort_be:
value = FT_NEXT_USHORT(cursor);
sign_shift = 16;
break;
case ft_frame_short_le:
/* read a 2-byte little-endian short */
case ft_frame_ushort_le:
value = FT_NEXT_USHORT_LE(cursor);
sign_shift = 16;
break;
case ft_frame_long_be:
/* read a 4-byte big-endian long */
case ft_frame_ulong_be:
value = FT_NEXT_ULONG(cursor);
sign_shift = 0;
break;
case ft_frame_long_le:
/* read a 4-byte little-endian long */
case ft_frame_ulong_le:
value = FT_NEXT_ULONG_LE(cursor);
sign_shift = 0;
break;
case ft_frame_off3_be:
/* read a 3-byte big-endian long */
case ft_frame_uoff3_be:
value = FT_NEXT_UOFF3(cursor);
sign_shift = 8;
break;
case ft_frame_off3_le:
/* read a 3-byte little-endian long */
case ft_frame_uoff3_le:
value = FT_NEXT_UOFF3_LE(cursor);
sign_shift = 8;
break;
default:
/* otherwise, exit the loop */
stream->cursor = cursor;
goto Exit;
}
/* now, compute the signed value is necessary */
if ( fields->value & FT_FRAME_OP_SIGNED )
value = (FT_ULong)( (FT_Int32)( value << sign_shift ) >> sign_shift );
/* finally, store the value in the object */
p = (FT_Byte*)structure + fields->offset;
switch ( fields->size )
{
case (8 / FT_CHAR_BIT):
*(FT_Byte*)p = (FT_Byte)value;
break;
case (16 / FT_CHAR_BIT):
*(FT_UShort*)p = (FT_UShort)value;
break;
case (32 / FT_CHAR_BIT):
*(FT_UInt32*)p = (FT_UInt32)value;
break;
/* for 64-bit systems */
default:
*(FT_ULong*)p = (FT_ULong)value;
}
/* go to next field */
fields++;
}
while ( 1 );
Exit:
/* close the frame if it was opened by this read */
if ( frame_accessed )
FT_Stream_ExitFrame( stream );
return error;
}
/* END */
/***************************************************************************/
/* */
/* fttrigon.c */
/* */
/* FreeType trigonometric functions (body). */
/* */
/* Copyright 2001-2005, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifdef FT_LONG64
typedef FT_INT64 FT_Int64;
#endif
/* the Cordic shrink factor 0.607252935008887 * 2^32 */
#define FT_TRIG_SCALE 0x9B74EDA8UL
/* the following is 0.607252935008887 * 2^30 */
#define FT_TRIG_COSCALE 0x26DD3B6AUL
/* this table was generated for FT_PI = 180L << 16, i.e. degrees */
#define FT_TRIG_MAX_ITERS 23
static const FT_Fixed
ft_trig_arctan_table[23] =
{
2949120L, 1740967L, 919879L, 466945L, 234379L, 117304L, 58666L,
29335L, 14668L, 7334L, 3667L, 1833L, 917L, 458L, 229L, 115L,
57L, 29L, 14L, 7L, 4L, 2L, 1L
};
#ifdef FT_LONG64
/* multiply a given value by the CORDIC shrink factor */
static FT_Fixed
ft_trig_downscale( FT_Fixed val )
{
FT_Fixed s;
FT_Int64 v;
s = val;
val = ( val >= 0 ) ? val : -val;
v = ( val * (FT_Int64)FT_TRIG_SCALE ) + 0x100000000UL;
val = (FT_Fixed)( v >> 32 );
return ( s >= 0 ) ? val : -val;
}
/* !FT_LONG64 */
#else
/* multiply a given value by the CORDIC shrink factor */
static FT_Fixed
ft_trig_downscale( FT_Fixed val )
{
FT_Fixed s;
FT_UInt32 v1, v2, k1, k2, hi, lo1, lo2, lo3;
s = val;
val = ( val >= 0 ) ? val : -val;
v1 = (FT_UInt32)val >> 16;
v2 = (FT_UInt32)( val & 0xFFFFL );
/* constant */
k1 = (FT_UInt32)FT_TRIG_SCALE >> 16;
/* constant */
k2 = (FT_UInt32)( FT_TRIG_SCALE & 0xFFFFL );
hi = k1 * v1;
/* can't overflow */
lo1 = k1 * v2 + k2 * v1;
lo2 = ( k2 * v2 ) >> 16;
lo3 = ( lo1 >= lo2 ) ? lo1 : lo2;
lo1 += lo2;
hi += lo1 >> 16;
if ( lo1 < lo3 )
hi += (FT_UInt32)0x10000UL;
val = (FT_Fixed)hi;
return ( s >= 0 ) ? val : -val;
}
/* !FT_LONG64 */
#endif
static FT_Int
ft_trig_prenorm( FT_Vector* vec )
{
FT_Fixed x, y, z;
FT_Int shift;
x = vec->x;
y = vec->y;
z = ( ( x >= 0 ) ? x : - x ) | ( (y >= 0) ? y : -y );
shift = 0;
#if 1
/* determine msb bit index in `shift' */
if ( z >= ( 1L << 16 ) )
{
z >>= 16;
shift += 16;
}
if ( z >= ( 1L << 8 ) )
{
z >>= 8;
shift += 8;
}
if ( z >= ( 1L << 4 ) )
{
z >>= 4;
shift += 4;
}
if ( z >= ( 1L << 2 ) )
{
z >>= 2;
shift += 2;
}
if ( z >= ( 1L << 1 ) )
{
z >>= 1;
shift += 1;
}
if ( shift <= 27 )
{
shift = 27 - shift;
vec->x = x << shift;
vec->y = y << shift;
}
else
{
shift -= 27;
vec->x = x >> shift;
vec->y = y >> shift;
shift = -shift;
}
/* 0 */
#else
if ( z < ( 1L << 27 ) )
{
do
{
shift++;
z <<= 1;
} while ( z < ( 1L << 27 ) );
vec->x = x << shift;
vec->y = y << shift;
}
else if ( z > ( 1L << 28 ) )
{
do
{
shift++;
z >>= 1;
} while ( z > ( 1L << 28 ) );
vec->x = x >> shift;
vec->y = y >> shift;
shift = -shift;
}
/* 0 */
#endif
return shift;
}
static void
ft_trig_pseudo_rotate( FT_Vector* vec,
FT_Angle theta )
{
FT_Int i;
FT_Fixed x, y, xtemp;
const FT_Fixed *arctanptr;
x = vec->x;
y = vec->y;
/* Get angle between -90 and 90 degrees */
while ( theta <= -FT_ANGLE_PI2 )
{
x = -x;
y = -y;
theta += FT_ANGLE_PI;
}
while ( theta > FT_ANGLE_PI2 )
{
x = -x;
y = -y;
theta -= FT_ANGLE_PI;
}
arctanptr = ft_trig_arctan_table;
/* Pseudorotations, with right shifts */
i = 0;
do
{
if ( theta < 0 )
{
xtemp = x + ( y >> i );
y = y - ( x >> i );
x = xtemp;
theta += *arctanptr++;
}
else
{
xtemp = x - ( y >> i );
y = y + ( x >> i );
x = xtemp;
theta -= *arctanptr++;
}
} while ( ++i < FT_TRIG_MAX_ITERS );
vec->x = x;
vec->y = y;
}
static void
ft_trig_pseudo_polarize( FT_Vector* vec )
{
FT_Angle theta;
FT_Int i;
FT_Fixed x, y, xtemp;
const FT_Fixed *arctanptr;
x = vec->x;
y = vec->y;
/* Get the vector into the right half plane */
theta = 0;
if ( x < 0 )
{
x = -x;
y = -y;
theta = 2 * FT_ANGLE_PI2;
}
if ( y > 0 )
theta = - theta;
arctanptr = ft_trig_arctan_table;
/* Pseudorotations, with right shifts */
i = 0;
do
{
if ( y > 0 )
{
xtemp = x + ( y >> i );
y = y - ( x >> i );
x = xtemp;
theta += *arctanptr++;
}
else
{
xtemp = x - ( y >> i );
y = y + ( x >> i );
x = xtemp;
theta -= *arctanptr++;
}
} while ( ++i < FT_TRIG_MAX_ITERS );
/* round theta */
if ( theta >= 0 )
theta = FT_PAD_ROUND( theta, 32 );
else
theta = -FT_PAD_ROUND( -theta, 32 );
vec->x = x;
vec->y = theta;
}
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( FT_Fixed )
FT_Cos( FT_Angle angle )
{
FT_Vector v;
v.x = FT_TRIG_COSCALE >> 2;
v.y = 0;
ft_trig_pseudo_rotate( &v, angle );
return v.x / ( 1 << 12 );
}
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( FT_Fixed )
FT_Sin( FT_Angle angle )
{
return FT_Cos( FT_ANGLE_PI2 - angle );
}
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( FT_Fixed )
FT_Tan( FT_Angle angle )
{
FT_Vector v;
v.x = FT_TRIG_COSCALE >> 2;
v.y = 0;
ft_trig_pseudo_rotate( &v, angle );
return FT_DivFix( v.y, v.x );
}
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( FT_Angle )
FT_Atan2( FT_Fixed dx,
FT_Fixed dy )
{
FT_Vector v;
if ( dx == 0 && dy == 0 )
return 0;
v.x = dx;
v.y = dy;
ft_trig_prenorm( &v );
ft_trig_pseudo_polarize( &v );
return v.y;
}
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( void )
FT_Vector_Unit( FT_Vector* vec,
FT_Angle angle )
{
vec->x = FT_TRIG_COSCALE >> 2;
vec->y = 0;
ft_trig_pseudo_rotate( vec, angle );
vec->x >>= 12;
vec->y >>= 12;
}
/* these macros return 0 for positive numbers,
and -1 for negative ones */
#define FT_SIGN_LONG( x ) ( (x) >> ( FT_SIZEOF_LONG * 8 - 1 ) )
#define FT_SIGN_INT( x ) ( (x) >> ( FT_SIZEOF_INT * 8 - 1 ) )
#define FT_SIGN_INT32( x ) ( (x) >> 31 )
#define FT_SIGN_INT16( x ) ( (x) >> 15 )
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( void )
FT_Vector_Rotate( FT_Vector* vec,
FT_Angle angle )
{
FT_Int shift;
FT_Vector v;
v.x = vec->x;
v.y = vec->y;
if ( angle && ( v.x != 0 || v.y != 0 ) )
{
shift = ft_trig_prenorm( &v );
ft_trig_pseudo_rotate( &v, angle );
v.x = ft_trig_downscale( v.x );
v.y = ft_trig_downscale( v.y );
if ( shift > 0 )
{
FT_Int32 half = (FT_Int32)1L << ( shift - 1 );
vec->x = ( v.x + half + FT_SIGN_LONG( v.x ) ) >> shift;
vec->y = ( v.y + half + FT_SIGN_LONG( v.y ) ) >> shift;
}
else
{
shift = -shift;
vec->x = v.x << shift;
vec->y = v.y << shift;
}
}
}
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( FT_Fixed )
FT_Vector_Length( FT_Vector* vec )
{
FT_Int shift;
FT_Vector v;
v = *vec;
/* handle trivial cases */
if ( v.x == 0 )
{
return ( v.y >= 0 ) ? v.y : -v.y;
}
else if ( v.y == 0 )
{
return ( v.x >= 0 ) ? v.x : -v.x;
}
/* general case */
shift = ft_trig_prenorm( &v );
ft_trig_pseudo_polarize( &v );
v.x = ft_trig_downscale( v.x );
if ( shift > 0 )
return ( v.x + ( 1 << ( shift - 1 ) ) ) >> shift;
return v.x << -shift;
}
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( void )
FT_Vector_Polarize( FT_Vector* vec,
FT_Fixed *length,
FT_Angle *angle )
{
FT_Int shift;
FT_Vector v;
v = *vec;
if ( v.x == 0 && v.y == 0 )
return;
shift = ft_trig_prenorm( &v );
ft_trig_pseudo_polarize( &v );
v.x = ft_trig_downscale( v.x );
*length = ( shift >= 0 ) ? ( v.x >> shift ) : ( v.x << -shift );
*angle = v.y;
}
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( void )
FT_Vector_From_Polar( FT_Vector* vec,
FT_Fixed length,
FT_Angle angle )
{
vec->x = length;
vec->y = 0;
FT_Vector_Rotate( vec, angle );
}
/* documentation is in fttrigon.h */
FT_EXPORT_DEF( FT_Angle )
FT_Angle_Diff( FT_Angle angle1,
FT_Angle angle2 )
{
FT_Angle delta = angle2 - angle1;
delta %= FT_ANGLE_2PI;
if ( delta < 0 )
delta += FT_ANGLE_2PI;
if ( delta > FT_ANGLE_PI )
delta -= FT_ANGLE_2PI;
return delta;
}
/* END */
/***************************************************************************/
/* */
/* ftutil.c */
/* */
/* FreeType utility file for memory and list management (body). */
/* */
/* Copyright 2002, 2004, 2005, 2006, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_memory
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** *****/
/***** M E M O R Y M A N A G E M E N T *****/
/***** *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
FT_BASE_DEF( FT_Pointer )
ft_mem_alloc( FT_Memory memory,
FT_Long size,
FT_Error *p_error )
{
FT_Error error;
FT_Pointer block = ft_mem_qalloc( memory, size, &error );
if ( !error && size > 0 )
FT_MEM_ZERO( block, size );
*p_error = error;
return block;
}
FT_BASE_DEF( FT_Pointer )
ft_mem_qalloc( FT_Memory memory,
FT_Long size,
FT_Error *p_error )
{
FT_Error error = FT_Err_Ok;
FT_Pointer block = NULL;
if ( size > 0 )
{
block = memory->alloc( memory, size );
if ( block == NULL )
error = FT_Err_Out_Of_Memory;
}
else if ( size < 0 )
{
/* may help catch/prevent security issues */
error = FT_Err_Invalid_Argument;
}
*p_error = error;
return block;
}
FT_BASE_DEF( FT_Pointer )
ft_mem_realloc( FT_Memory memory,
FT_Long item_size,
FT_Long cur_count,
FT_Long new_count,
void* block,
FT_Error *p_error )
{
FT_Error error = FT_Err_Ok;
block = ft_mem_qrealloc( memory, item_size,
cur_count, new_count, block, &error );
if ( !error && new_count > cur_count )
FT_MEM_ZERO( (char*)block + cur_count * item_size,
( new_count - cur_count ) * item_size );
*p_error = error;
return block;
}
FT_BASE_DEF( FT_Pointer )
ft_mem_qrealloc( FT_Memory memory,
FT_Long item_size,
FT_Long cur_count,
FT_Long new_count,
void* block,
FT_Error *p_error )
{
FT_Error error = FT_Err_Ok;
/* Note that we now accept `item_size == 0' as a valid parameter, in
* order to cover very weird cases where an ALLOC_MULT macro would be
* called.
*/
if ( cur_count < 0 || new_count < 0 || item_size < 0 )
{
/* may help catch/prevent nasty security issues */
error = FT_Err_Invalid_Argument;
}
else if ( new_count == 0 || item_size == 0 )
{
ft_mem_free( memory, block );
block = NULL;
}
else if ( new_count > FT_INT_MAX/item_size )
{
error = FT_Err_Array_Too_Large;
}
else if ( cur_count == 0 )
{
FT_ASSERT( block == NULL );
block = ft_mem_alloc( memory, new_count*item_size, &error );
}
else
{
FT_Pointer block2;
FT_Long cur_size = cur_count*item_size;
FT_Long new_size = new_count*item_size;
block2 = memory->realloc( memory, cur_size, new_size, block );
if ( block2 == NULL )
error = FT_Err_Out_Of_Memory;
else
block = block2;
}
*p_error = error;
return block;
}
FT_BASE_DEF( void )
ft_mem_free( FT_Memory memory,
const void *P )
{
if ( P )
memory->free( memory, (void*)P );
}
FT_BASE_DEF( FT_Pointer )
ft_mem_dup( FT_Memory memory,
const void* address,
FT_ULong size,
FT_Error *p_error )
{
FT_Error error;
FT_Pointer p = ft_mem_qalloc( memory, size, &error );
if ( !error && address )
ft_memcpy( p, address, size );
*p_error = error;
return p;
}
FT_BASE_DEF( FT_Pointer )
ft_mem_strdup( FT_Memory memory,
const char* str,
FT_Error *p_error )
{
FT_ULong len = str ? (FT_ULong)ft_strlen( str ) + 1
: 0;
return ft_mem_dup( memory, str, len, p_error );
}
FT_BASE_DEF( FT_Int )
ft_mem_strcpyn( char* dst,
const char* src,
FT_ULong size )
{
while ( size > 1 && *src != 0 )
{
*dst++ = *src++;
size--;
}
/* always zero-terminate */
*dst = 0;
return *src != 0;
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** *****/
/***** D O U B L Y L I N K E D L I S T S *****/
/***** *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
#undef FT_COMPONENT
#define FT_COMPONENT trace_list
/* documentation is in ftlist.h */
FT_EXPORT_DEF( FT_ListNode )
FT_List_Find( FT_List list,
void* data )
{
FT_ListNode cur;
cur = list->head;
while ( cur )
{
if ( cur->data == data )
return cur;
cur = cur->next;
}
return (FT_ListNode)0;
}
/* documentation is in ftlist.h */
FT_EXPORT_DEF( void )
FT_List_Add( FT_List list,
FT_ListNode node )
{
FT_ListNode before = list->tail;
node->next = 0;
node->prev = before;
if ( before )
before->next = node;
else
list->head = node;
list->tail = node;
}
/* documentation is in ftlist.h */
FT_EXPORT_DEF( void )
FT_List_Insert( FT_List list,
FT_ListNode node )
{
FT_ListNode after = list->head;
node->next = after;
node->prev = 0;
if ( !after )
list->tail = node;
else
after->prev = node;
list->head = node;
}
/* documentation is in ftlist.h */
FT_EXPORT_DEF( void )
FT_List_Remove( FT_List list,
FT_ListNode node )
{
FT_ListNode before, after;
before = node->prev;
after = node->next;
if ( before )
before->next = after;
else
list->head = after;
if ( after )
after->prev = before;
else
list->tail = before;
}
/* documentation is in ftlist.h */
FT_EXPORT_DEF( void )
FT_List_Up( FT_List list,
FT_ListNode node )
{
FT_ListNode before, after;
before = node->prev;
after = node->next;
/* check whether we are already on top of the list */
if ( !before )
return;
before->next = after;
if ( after )
after->prev = before;
else
list->tail = before;
node->prev = 0;
node->next = list->head;
list->head->prev = node;
list->head = node;
}
/* documentation is in ftlist.h */
FT_EXPORT_DEF( FT_Error )
FT_List_Iterate( FT_List list,
FT_List_Iterator iterator,
void* user )
{
FT_ListNode cur = list->head;
FT_Error error = FT_Err_Ok;
while ( cur )
{
FT_ListNode next = cur->next;
error = iterator( cur, user );
if ( error )
break;
cur = next;
}
return error;
}
/* documentation is in ftlist.h */
FT_EXPORT_DEF( void )
FT_List_Finalize( FT_List list,
FT_List_Destructor destroy,
FT_Memory memory,
void* user )
{
FT_ListNode cur;
cur = list->head;
while ( cur )
{
FT_ListNode next = cur->next;
void* data = cur->data;
if ( destroy )
destroy( memory, data, user );
FT_FREE( cur );
cur = next;
}
list->head = 0;
list->tail = 0;
}
FT_BASE_DEF( FT_UInt32 )
ft_highpow2( FT_UInt32 value )
{
FT_UInt32 value2;
/*
* We simply clear the lowest bit in each iteration. When
* we reach 0, we know that the previous value was our result.
*/
for ( ;; )
{
/* clear lowest bit */
value2 = value & (value - 1);
if ( value2 == 0 )
break;
value = value2;
}
return value;
}
/* END */
#ifdef FT_MACINTOSH
/***************************************************************************/
/* */
/* ftmac.c */
/* */
/* Mac FOND support. Written by just@letterror.com. */
/* Heavily modified by mpsuzuki, George Williams, and Sean McBride. */
/* */
/* This file is for Mac OS X only; see builds/mac/ftoldmac.c for */
/* classic platforms built by MPW. */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, */
/* 2009 by */
/* Just van Rossum, David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*
Notes
Mac suitcase files can (and often do!) contain multiple fonts. To
support this I use the face_index argument of FT_(Open|New)_Face()
functions, and pretend the suitcase file is a collection.
Warning: fbit and NFNT bitmap resources are not supported yet. In old
sfnt fonts, bitmap glyph data for each size is stored in each `NFNT'
resources instead of the `bdat' table in the sfnt resource. Therefore,
face->num_fixed_sizes is set to 0, because bitmap data in `NFNT'
resource is unavailable at present.
The Mac FOND support works roughly like this:
- Check whether the offered stream points to a Mac suitcase file. This
is done by checking the file type: it has to be 'FFIL' or 'tfil'. The
stream that gets passed to our init_face() routine is a stdio stream,
which isn't usable for us, since the FOND resources live in the
resource fork. So we just grab the stream->pathname field.
- Read the FOND resource into memory, then check whether there is a
TrueType font and/or(!) a Type 1 font available.
- If there is a Type 1 font available (as a separate `LWFN' file), read
its data into memory, massage it slightly so it becomes PFB data, wrap
it into a memory stream, load the Type 1 driver and delegate the rest
of the work to it by calling FT_Open_Face(). (XXX TODO: after this
has been done, the kerning data from the FOND resource should be
appended to the face: On the Mac there are usually no AFM files
available. However, this is tricky since we need to map Mac char
codes to ps glyph names to glyph ID's...)
- If there is a TrueType font (an `sfnt' resource), read it into memory,
wrap it into a memory stream, load the TrueType driver and delegate
the rest of the work to it, by calling FT_Open_Face().
- Some suitcase fonts (notably Onyx) might point the `LWFN' file to
itself, even though it doesn't contains `POST' resources. To handle
this special case without opening the file an extra time, we just
ignore errors from the `LWFN' and fallback to the `sfnt' if both are
available.
*/
/* This is for Mac OS X. Without redefinition, OS_INLINE */
/* expands to `static inline' which doesn't survive the */
/* -ansi compilation flag of GCC. */
#if !HAVE_ANSI_OS_INLINE
#undef OS_INLINE
#define OS_INLINE static __inline__
#endif
/* `configure' checks the availability of `ResourceIndex' strictly */
/* and sets HAVE_TYPE_RESOURCE_INDEX 1 or 0 always. If it is */
/* not set (e.g., a build without `configure'), the availability */
/* is guessed from the SDK version. */
#ifndef HAVE_TYPE_RESOURCE_INDEX
#if !defined( MAC_OS_X_VERSION_10_5 ) || \
( MAC_OS_X_VERSION_MAX_ALLOWED < MAC_OS_X_VERSION_10_5 )
#define HAVE_TYPE_RESOURCE_INDEX 0
#else
#define HAVE_TYPE_RESOURCE_INDEX 1
#endif
/* !HAVE_TYPE_RESOURCE_INDEX */
#endif
#if ( HAVE_TYPE_RESOURCE_INDEX == 0 )
typedef short ResourceIndex;
#endif
#include <CoreServices/CoreServices.h>
#include <ApplicationServices/ApplicationServices.h>
/* PATH_MAX */
#include <sys/syslimits.h>
/* Don't want warnings about our own use of deprecated functions. */
#define FT_DEPRECATED_ATTRIBUTE
/***************************************************************************/
/* */
/* ftmac.h */
/* */
/* Additional Mac-specific API. */
/* */
/* Copyright 1996-2001, 2004, 2006, 2007 by */
/* Just van Rossum, David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* NOTE: Include this file after <freetype/freetype.h> and after any */
/* Mac-specific headers (because this header uses Mac types such as */
/* Handle, FSSpec, FSRef, etc.) */
/* */
/***************************************************************************/
#define __FTMAC_H__
FT_BEGIN_HEADER
/* gcc-3.4.1 and later can warn about functions tagged as deprecated */
#ifndef FT_DEPRECATED_ATTRIBUTE
#if defined(__GNUC__) && \
((__GNUC__ >= 4) || ((__GNUC__ == 3) && (__GNUC_MINOR__ >= 1)))
#define FT_DEPRECATED_ATTRIBUTE __attribute__((deprecated))
#else
#define FT_DEPRECATED_ATTRIBUTE
#endif
#endif
/*************************************************************************/
/* */
/* <Section> */
/* mac_specific */
/* */
/* <Title> */
/* Mac Specific Interface */
/* */
/* <Abstract> */
/* Only available on the Macintosh. */
/* */
/* <Description> */
/* The following definitions are only available if FreeType is */
/* compiled on a Macintosh. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Face_From_FOND */
/* */
/* <Description> */
/* Create a new face object from a FOND resource. */
/* */
/* <InOut> */
/* library :: A handle to the library resource. */
/* */
/* <Input> */
/* fond :: A FOND resource. */
/* */
/* face_index :: Only supported for the -1 `sanity check' special */
/* case. */
/* */
/* <Output> */
/* aface :: A handle to a new face object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Notes> */
/* This function can be used to create @FT_Face objects from fonts */
/* that are installed in the system as follows. */
/* */
/* { */
/* fond = GetResource( 'FOND', fontName ); */
/* error = FT_New_Face_From_FOND( library, fond, 0, &face ); */
/* } */
/* */
FT_EXPORT( FT_Error )
FT_New_Face_From_FOND( FT_Library library,
Handle fond,
FT_Long face_index,
FT_Face *aface )
FT_DEPRECATED_ATTRIBUTE;
/*************************************************************************/
/* */
/* <Function> */
/* FT_GetFile_From_Mac_Name */
/* */
/* <Description> */
/* Return an FSSpec for the disk file containing the named font. */
/* */
/* <Input> */
/* fontName :: Mac OS name of the font (e.g., Times New Roman */
/* Bold). */
/* */
/* <Output> */
/* pathSpec :: FSSpec to the file. For passing to */
/* @FT_New_Face_From_FSSpec. */
/* */
/* face_index :: Index of the face. For passing to */
/* @FT_New_Face_From_FSSpec. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_GetFile_From_Mac_Name( const char* fontName,
FSSpec* pathSpec,
FT_Long* face_index )
FT_DEPRECATED_ATTRIBUTE;
/*************************************************************************/
/* */
/* <Function> */
/* FT_GetFile_From_Mac_ATS_Name */
/* */
/* <Description> */
/* Return an FSSpec for the disk file containing the named font. */
/* */
/* <Input> */
/* fontName :: Mac OS name of the font in ATS framework. */
/* */
/* <Output> */
/* pathSpec :: FSSpec to the file. For passing to */
/* @FT_New_Face_From_FSSpec. */
/* */
/* face_index :: Index of the face. For passing to */
/* @FT_New_Face_From_FSSpec. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_GetFile_From_Mac_ATS_Name( const char* fontName,
FSSpec* pathSpec,
FT_Long* face_index )
FT_DEPRECATED_ATTRIBUTE;
/*************************************************************************/
/* */
/* <Function> */
/* FT_GetFilePath_From_Mac_ATS_Name */
/* */
/* <Description> */
/* Return a pathname of the disk file and face index for given font */
/* name which is handled by ATS framework. */
/* */
/* <Input> */
/* fontName :: Mac OS name of the font in ATS framework. */
/* */
/* <Output> */
/* path :: Buffer to store pathname of the file. For passing */
/* to @FT_New_Face. The client must allocate this */
/* buffer before calling this function. */
/* */
/* maxPathSize :: Lengths of the buffer `path' that client allocated. */
/* */
/* face_index :: Index of the face. For passing to @FT_New_Face. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_GetFilePath_From_Mac_ATS_Name( const char* fontName,
UInt8* path,
UInt32 maxPathSize,
FT_Long* face_index )
FT_DEPRECATED_ATTRIBUTE;
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Face_From_FSSpec */
/* */
/* <Description> */
/* Create a new face object from a given resource and typeface index */
/* using an FSSpec to the font file. */
/* */
/* <InOut> */
/* library :: A handle to the library resource. */
/* */
/* <Input> */
/* spec :: FSSpec to the font file. */
/* */
/* face_index :: The index of the face within the resource. The */
/* first face has index~0. */
/* <Output> */
/* aface :: A handle to a new face object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* @FT_New_Face_From_FSSpec is identical to @FT_New_Face except */
/* it accepts an FSSpec instead of a path. */
/* */
FT_EXPORT( FT_Error )
FT_New_Face_From_FSSpec( FT_Library library,
const FSSpec *spec,
FT_Long face_index,
FT_Face *aface )
FT_DEPRECATED_ATTRIBUTE;
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Face_From_FSRef */
/* */
/* <Description> */
/* Create a new face object from a given resource and typeface index */
/* using an FSRef to the font file. */
/* */
/* <InOut> */
/* library :: A handle to the library resource. */
/* */
/* <Input> */
/* spec :: FSRef to the font file. */
/* */
/* face_index :: The index of the face within the resource. The */
/* first face has index~0. */
/* <Output> */
/* aface :: A handle to a new face object. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* @FT_New_Face_From_FSRef is identical to @FT_New_Face except */
/* it accepts an FSRef instead of a path. */
/* */
FT_EXPORT( FT_Error )
FT_New_Face_From_FSRef( FT_Library library,
const FSRef *ref,
FT_Long face_index,
FT_Face *aface )
FT_DEPRECATED_ATTRIBUTE;
/* */
FT_END_HEADER
/* END */
/* since Mac OS X 10.1 */
#ifndef kATSOptionFlagsUnRestrictedScope
#define kATSOptionFlagsUnRestrictedScope kATSOptionFlagsDefault
#endif
/* Set PREFER_LWFN to 1 if LWFN (Type 1) is preferred over
TrueType in case *both* are available (this is not common,
but it *is* possible). */
#ifndef PREFER_LWFN
#define PREFER_LWFN 1
#endif
#ifdef FT_MACINTOSH
/* This function is deprecated because FSSpec is deprecated in Mac OS X */
FT_EXPORT_DEF( FT_Error )
FT_GetFile_From_Mac_Name( const char* fontName,
FSSpec* pathSpec,
FT_Long* face_index )
{
FT_UNUSED( fontName );
FT_UNUSED( pathSpec );
FT_UNUSED( face_index );
return FT_Err_Unimplemented_Feature;
}
/* Private function. */
/* The FSSpec type has been discouraged for a long time, */
/* unfortunately an FSRef replacement API for */
/* ATSFontGetFileSpecification() is only available in */
/* Mac OS X 10.5 and later. */
static OSStatus
FT_ATSFontGetFileReference( ATSFontRef ats_font_id,
FSRef* ats_font_ref )
{
#if defined( MAC_OS_X_VERSION_10_5 ) && \
( MAC_OS_X_VERSION_MIN_REQUIRED >= MAC_OS_X_VERSION_10_5 )
OSStatus err;
err = ATSFontGetFileReference( ats_font_id, ats_font_ref );
return err;
/* No 64bit Carbon API on legacy platforms */
#elif __LP64__
FT_UNUSED( ats_font_id );
FT_UNUSED( ats_font_ref );
return fnfErr;
/* 32bit Carbon API on legacy platforms */
#else
OSStatus err;
FSSpec spec;
err = ATSFontGetFileSpecification( ats_font_id, &spec );
if ( noErr == err )
err = FSpMakeFSRef( &spec, ats_font_ref );
return err;
#endif
}
static FT_Error
FT_GetFileRef_From_Mac_ATS_Name( const char* fontName,
FSRef* ats_font_ref,
FT_Long* face_index )
{
CFStringRef cf_fontName;
ATSFontRef ats_font_id;
*face_index = 0;
cf_fontName = CFStringCreateWithCString( NULL, fontName,
kCFStringEncodingMacRoman );
ats_font_id = ATSFontFindFromName( cf_fontName,
kATSOptionFlagsUnRestrictedScope );
CFRelease( cf_fontName );
if ( ats_font_id == 0 || ats_font_id == 0xFFFFFFFFUL )
return FT_Err_Unknown_File_Format;
if ( noErr != FT_ATSFontGetFileReference( ats_font_id, ats_font_ref ) )
return FT_Err_Unknown_File_Format;
/* face_index calculation by searching preceding fontIDs */
/* with same FSRef */
{
ATSFontRef id2 = ats_font_id - 1;
FSRef ref2;
while ( id2 > 0 )
{
if ( noErr != FT_ATSFontGetFileReference( id2, &ref2 ) )
break;
if ( noErr != FSCompareFSRefs( ats_font_ref, &ref2 ) )
break;
id2 --;
}
*face_index = ats_font_id - ( id2 + 1 );
}
return FT_Err_Ok;
}
FT_EXPORT_DEF( FT_Error )
FT_GetFilePath_From_Mac_ATS_Name( const char* fontName,
UInt8* path,
UInt32 maxPathSize,
FT_Long* face_index )
{
FSRef ref;
FT_Error err;
err = FT_GetFileRef_From_Mac_ATS_Name( fontName, &ref, face_index );
if ( FT_Err_Ok != err )
return err;
if ( noErr != FSRefMakePath( &ref, path, maxPathSize ) )
return FT_Err_Unknown_File_Format;
return FT_Err_Ok;
}
/* This function is deprecated because FSSpec is deprecated in Mac OS X */
FT_EXPORT_DEF( FT_Error )
FT_GetFile_From_Mac_ATS_Name( const char* fontName,
FSSpec* pathSpec,
FT_Long* face_index )
{
#if ( __LP64__ ) || ( defined( MAC_OS_X_VERSION_10_5 ) && \
( MAC_OS_X_VERSION_MIN_REQUIRED >= MAC_OS_X_VERSION_10_5 ) )
FT_UNUSED( fontName );
FT_UNUSED( pathSpec );
FT_UNUSED( face_index );
return FT_Err_Unimplemented_Feature;
#else
FSRef ref;
FT_Error err;
err = FT_GetFileRef_From_Mac_ATS_Name( fontName, &ref, face_index );
if ( FT_Err_Ok != err )
return err;
if ( noErr != FSGetCatalogInfo( &ref, kFSCatInfoNone, NULL, NULL,
pathSpec, NULL ) )
return FT_Err_Unknown_File_Format;
return FT_Err_Ok;
#endif
}
static OSErr
FT_FSPathMakeRes( const UInt8* pathname,
ResFileRefNum* res )
{
OSErr err;
FSRef ref;
if ( noErr != FSPathMakeRef( pathname, &ref, FALSE ) )
return FT_Err_Cannot_Open_Resource;
/* at present, no support for dfont format */
err = FSOpenResourceFile( &ref, 0, NULL, fsRdPerm, res );
if ( noErr == err )
return err;
/* fallback to original resource-fork font */
*res = FSOpenResFile( &ref, fsRdPerm );
err = ResError();
return err;
}
/* Return the file type for given pathname */
static OSType
get_file_type_from_path( const UInt8* pathname )
{
FSRef ref;
FSCatalogInfo info;
if ( noErr != FSPathMakeRef( pathname, &ref, FALSE ) )
return ( OSType ) 0;
if ( noErr != FSGetCatalogInfo( &ref, kFSCatInfoFinderInfo, &info,
NULL, NULL, NULL ) )
return ( OSType ) 0;
return ((FInfo *)(info.finderInfo))->fdType;
}
/* Given a PostScript font name, create the Macintosh LWFN file name. */
static void
create_lwfn_name( char* ps_name,
Str255 lwfn_file_name )
{
int max = 5, count = 0;
FT_Byte* p = lwfn_file_name;
FT_Byte* q = (FT_Byte*)ps_name;
lwfn_file_name[0] = 0;
while ( *q )
{
if ( ft_isupper( *q ) )
{
if ( count )
max = 3;
count = 0;
}
if ( count < max && ( ft_isalnum( *q ) || *q == '_' ) )
{
*++p = *q;
lwfn_file_name[0]++;
count++;
}
q++;
}
}
static short
count_faces_sfnt( char* fond_data )
{
/* The count is 1 greater than the value in the FOND. */
/* Isn't that cute? :-) */
return EndianS16_BtoN( *( (short*)( fond_data +
sizeof ( FamRec ) ) ) ) + 1;
}
static short
count_faces_scalable( char* fond_data )
{
AsscEntry* assoc;
FamRec* fond;
short i, face, face_all;
fond = (FamRec*)fond_data;
face_all = EndianS16_BtoN( *( (short *)( fond_data +
sizeof ( FamRec ) ) ) ) + 1;
assoc = (AsscEntry*)( fond_data + sizeof ( FamRec ) + 2 );
face = 0;
for ( i = 0; i < face_all; i++ )
{
if ( 0 == EndianS16_BtoN( assoc[i].fontSize ) )
face++;
}
return face;
}
/* Look inside the FOND data, answer whether there should be an SFNT
resource, and answer the name of a possible LWFN Type 1 file.
Thanks to Paul Miller (paulm@profoundeffects.com) for the fix
to load a face OTHER than the first one in the FOND!
*/
static void
parse_fond( char* fond_data,
short* have_sfnt,
ResID* sfnt_id,
Str255 lwfn_file_name,
short face_index )
{
AsscEntry* assoc;
AsscEntry* base_assoc;
FamRec* fond;
*sfnt_id = 0;
*have_sfnt = 0;
lwfn_file_name[0] = 0;
fond = (FamRec*)fond_data;
assoc = (AsscEntry*)( fond_data + sizeof ( FamRec ) + 2 );
base_assoc = assoc;
/* the maximum faces in a FOND is 48, size of StyleTable.indexes[] */
if ( 47 < face_index )
return;
/* Let's do a little range checking before we get too excited here */
if ( face_index < count_faces_sfnt( fond_data ) )
{
/* add on the face_index! */
assoc += face_index;
/* if the face at this index is not scalable,
fall back to the first one (old behavior) */
if ( EndianS16_BtoN( assoc->fontSize ) == 0 )
{
*have_sfnt = 1;
*sfnt_id = EndianS16_BtoN( assoc->fontID );
}
else if ( base_assoc->fontSize == 0 )
{
*have_sfnt = 1;
*sfnt_id = EndianS16_BtoN( base_assoc->fontID );
}
}
if ( EndianS32_BtoN( fond->ffStylOff ) )
{
unsigned char* p = (unsigned char*)fond_data;
StyleTable* style;
unsigned short string_count;
char ps_name[256];
unsigned char* names[64];
int i;
p += EndianS32_BtoN( fond->ffStylOff );
style = (StyleTable*)p;
p += sizeof ( StyleTable );
string_count = EndianS16_BtoN( *(short*)(p) );
p += sizeof ( short );
for ( i = 0; i < string_count && i < 64; i++ )
{
names[i] = p;
p += names[i][0];
p++;
}
{
size_t ps_name_len = (size_t)names[0][0];
if ( ps_name_len != 0 )
{
ft_memcpy(ps_name, names[0] + 1, ps_name_len);
ps_name[ps_name_len] = 0;
}
if ( style->indexes[face_index] > 1 &&
style->indexes[face_index] <= FT_MIN( string_count, 64 ) )
{
unsigned char* suffixes = names[style->indexes[face_index] - 1];
for ( i = 1; i <= suffixes[0]; i++ )
{
unsigned char* s;
size_t j = suffixes[i] - 1;
if ( j < string_count && ( s = names[j] ) != NULL )
{
size_t s_len = (size_t)s[0];
if ( s_len != 0 && ps_name_len + s_len < sizeof ( ps_name ) )
{
ft_memcpy( ps_name + ps_name_len, s + 1, s_len );
ps_name_len += s_len;
ps_name[ps_name_len] = 0;
}
}
}
}
}
create_lwfn_name( ps_name, lwfn_file_name );
}
}
static FT_Error
lookup_lwfn_by_fond( const UInt8* path_fond,
ConstStr255Param base_lwfn,
UInt8* path_lwfn,
size_t path_size )
{
FSRef ref, par_ref;
size_t dirname_len;
/* Pathname for FSRef can be in various formats: HFS, HFS+, and POSIX. */
/* We should not extract parent directory by string manipulation. */
if ( noErr != FSPathMakeRef( path_fond, &ref, FALSE ) )
return FT_Err_Invalid_Argument;
if ( noErr != FSGetCatalogInfo( &ref, kFSCatInfoNone,
NULL, NULL, NULL, &par_ref ) )
return FT_Err_Invalid_Argument;
if ( noErr != FSRefMakePath( &par_ref, path_lwfn, path_size ) )
return FT_Err_Invalid_Argument;
if ( ft_strlen( (char *)path_lwfn ) + 1 + base_lwfn[0] > path_size )
return FT_Err_Invalid_Argument;
/* now we have absolute dirname in path_lwfn */
ft_strcat( (char *)path_lwfn, "/" );
dirname_len = ft_strlen( (char *)path_lwfn );
ft_strcat( (char *)path_lwfn, (char *)base_lwfn + 1 );
path_lwfn[dirname_len + base_lwfn[0]] = '\0';
if ( noErr != FSPathMakeRef( path_lwfn, &ref, FALSE ) )
return FT_Err_Cannot_Open_Resource;
if ( noErr != FSGetCatalogInfo( &ref, kFSCatInfoNone,
NULL, NULL, NULL, NULL ) )
return FT_Err_Cannot_Open_Resource;
return FT_Err_Ok;
}
static short
count_faces( Handle fond,
const UInt8* pathname )
{
ResID sfnt_id;
short have_sfnt, have_lwfn;
Str255 lwfn_file_name;
UInt8 buff[PATH_MAX];
FT_Error err;
short num_faces;
have_sfnt = have_lwfn = 0;
parse_fond( *fond, &have_sfnt, &sfnt_id, lwfn_file_name, 0 );
if ( lwfn_file_name[0] )
{
err = lookup_lwfn_by_fond( pathname, lwfn_file_name,
buff, sizeof ( buff ) );
if ( FT_Err_Ok == err )
have_lwfn = 1;
}
if ( have_lwfn && ( !have_sfnt || PREFER_LWFN ) )
num_faces = 1;
else
num_faces = count_faces_scalable( *fond );
return num_faces;
}
/* Read Type 1 data from the POST resources inside the LWFN file,
return a PFB buffer. This is somewhat convoluted because the FT2
PFB parser wants the ASCII header as one chunk, and the LWFN
chunks are often not organized that way, so we glue chunks
of the same type together. */
static FT_Error
read_lwfn( FT_Memory memory,
ResFileRefNum res,
FT_Byte** pfb_data,
FT_ULong* size )
{
FT_Error error = FT_Err_Ok;
ResID res_id;
unsigned char *buffer, *p, *size_p = NULL;
FT_ULong total_size = 0;
FT_ULong old_total_size = 0;
FT_ULong post_size, pfb_chunk_size;
Handle post_data;
char code, last_code;
UseResFile( res );
/* First pass: load all POST resources, and determine the size of */
/* the output buffer. */
res_id = 501;
last_code = -1;
for (;;)
{
post_data = Get1Resource( TTAG_POST, res_id++ );
if ( post_data == NULL )
/* we are done */
break;
code = (*post_data)[0];
if ( code != last_code )
{
if ( code == 5 )
/* just the end code */
total_size += 2;
else
/* code + 4 bytes chunk length */
total_size += 6;
}
total_size += GetHandleSize( post_data ) - 2;
last_code = code;
/* detect integer overflows */
if ( total_size < old_total_size )
{
error = FT_Err_Array_Too_Large;
goto Error;
}
old_total_size = total_size;
}
if ( FT_ALLOC( buffer, (FT_Long)total_size ) )
goto Error;
/* Second pass: append all POST data to the buffer, add PFB fields. */
/* Glue all consecutive chunks of the same type together. */
p = buffer;
res_id = 501;
last_code = -1;
pfb_chunk_size = 0;
for (;;)
{
post_data = Get1Resource( TTAG_POST, res_id++ );
if ( post_data == NULL )
/* we are done */
break;
post_size = (FT_ULong)GetHandleSize( post_data ) - 2;
code = (*post_data)[0];
if ( code != last_code )
{
if ( last_code != -1 )
{
/* we are done adding a chunk, fill in the size field */
if ( size_p != NULL )
{
*size_p++ = (FT_Byte)( pfb_chunk_size & 0xFF );
*size_p++ = (FT_Byte)( ( pfb_chunk_size >> 8 ) & 0xFF );
*size_p++ = (FT_Byte)( ( pfb_chunk_size >> 16 ) & 0xFF );
*size_p++ = (FT_Byte)( ( pfb_chunk_size >> 24 ) & 0xFF );
}
pfb_chunk_size = 0;
}
*p++ = 0x80;
if ( code == 5 )
/* the end */
*p++ = 0x03;
else if ( code == 2 )
/* binary segment */
*p++ = 0x02;
else
/* ASCII segment */
*p++ = 0x01;
if ( code != 5 )
{
/* save for later */
size_p = p;
/* make space for size field */
p += 4;
}
}
ft_memcpy( p, *post_data + 2, post_size );
pfb_chunk_size += post_size;
p += post_size;
last_code = code;
}
*pfb_data = buffer;
*size = total_size;
Error:
CloseResFile( res );
return error;
}
/* Create a new FT_Face from a file path to an LWFN file. */
static FT_Error
FT_New_Face_From_LWFN( FT_Library library,
const UInt8* pathname,
FT_Long face_index,
FT_Face* aface )
{
FT_Byte* pfb_data;
FT_ULong pfb_size;
FT_Error error;
ResFileRefNum res;
if ( noErr != FT_FSPathMakeRes( pathname, &res ) )
return FT_Err_Cannot_Open_Resource;
pfb_data = NULL;
pfb_size = 0;
error = read_lwfn( library->memory, res, &pfb_data, &pfb_size );
/* PFB is already loaded, useless anymore */
CloseResFile( res );
if ( error )
return error;
return open_face_from_buffer( library,
pfb_data,
pfb_size,
face_index,
"type1",
aface );
}
/* Create a new FT_Face from an SFNT resource, specified by res ID. */
static FT_Error
FT_New_Face_From_SFNT( FT_Library library,
ResID sfnt_id,
FT_Long face_index,
FT_Face* aface )
{
Handle sfnt = NULL;
FT_Byte* sfnt_data;
size_t sfnt_size;
FT_Error error = FT_Err_Ok;
FT_Memory memory = library->memory;
int is_cff, is_sfnt_ps;
sfnt = GetResource( TTAG_sfnt, sfnt_id );
if ( sfnt == NULL )
return FT_Err_Invalid_Handle;
sfnt_size = (FT_ULong)GetHandleSize( sfnt );
if ( FT_ALLOC( sfnt_data, (FT_Long)sfnt_size ) )
{
ReleaseResource( sfnt );
return error;
}
ft_memcpy( sfnt_data, *sfnt, sfnt_size );
ReleaseResource( sfnt );
is_cff = sfnt_size > 4 && !ft_memcmp( sfnt_data, "OTTO", 4 );
is_sfnt_ps = sfnt_size > 4 && !ft_memcmp( sfnt_data, "typ1", 4 );
if ( is_sfnt_ps )
{
FT_Stream stream;
if ( FT_NEW( stream ) )
goto Try_OpenType;
FT_Stream_OpenMemory( stream, sfnt_data, sfnt_size );
if ( !open_face_PS_from_sfnt_stream( library,
stream,
face_index,
0, NULL,
aface ) )
{
FT_Stream_Close( stream );
FT_FREE( stream );
FT_FREE( sfnt_data );
goto Exit;
}
FT_FREE( stream );
}
Try_OpenType:
error = open_face_from_buffer( library,
sfnt_data,
sfnt_size,
face_index,
is_cff ? "cff" : "truetype",
aface );
Exit:
return error;
}
/* Create a new FT_Face from a file path to a suitcase file. */
static FT_Error
FT_New_Face_From_Suitcase( FT_Library library,
const UInt8* pathname,
FT_Long face_index,
FT_Face* aface )
{
FT_Error error = FT_Err_Cannot_Open_Resource;
ResFileRefNum res_ref;
ResourceIndex res_index;
Handle fond;
short num_faces_in_res, num_faces_in_fond;
if ( noErr != FT_FSPathMakeRes( pathname, &res_ref ) )
return FT_Err_Cannot_Open_Resource;
UseResFile( res_ref );
if ( ResError() )
return FT_Err_Cannot_Open_Resource;
num_faces_in_res = 0;
for ( res_index = 1; ; ++res_index )
{
fond = Get1IndResource( TTAG_FOND, res_index );
if ( ResError() )
break;
num_faces_in_fond = count_faces( fond, pathname );
num_faces_in_res += num_faces_in_fond;
if ( 0 <= face_index && face_index < num_faces_in_fond && error )
error = FT_New_Face_From_FOND( library, fond, face_index, aface );
face_index -= num_faces_in_fond;
}
CloseResFile( res_ref );
if ( FT_Err_Ok == error && NULL != aface && NULL != *aface )
(*aface)->num_faces = num_faces_in_res;
return error;
}
/* documentation is in ftmac.h */
FT_EXPORT_DEF( FT_Error )
FT_New_Face_From_FOND( FT_Library library,
Handle fond,
FT_Long face_index,
FT_Face* aface )
{
short have_sfnt, have_lwfn = 0;
ResID sfnt_id, fond_id;
OSType fond_type;
Str255 fond_name;
Str255 lwfn_file_name;
UInt8 path_lwfn[PATH_MAX];
OSErr err;
FT_Error error = FT_Err_Ok;
GetResInfo( fond, &fond_id, &fond_type, fond_name );
if ( ResError() != noErr || fond_type != TTAG_FOND )
return FT_Err_Invalid_File_Format;
parse_fond( *fond, &have_sfnt, &sfnt_id, lwfn_file_name, face_index );
if ( lwfn_file_name[0] )
{
ResFileRefNum res;
res = HomeResFile( fond );
if ( noErr != ResError() )
goto found_no_lwfn_file;
{
UInt8 path_fond[PATH_MAX];
FSRef ref;
err = FSGetForkCBInfo( res, kFSInvalidVolumeRefNum,
NULL, NULL, NULL, &ref, NULL );
if ( noErr != err )
goto found_no_lwfn_file;
err = FSRefMakePath( &ref, path_fond, sizeof ( path_fond ) );
if ( noErr != err )
goto found_no_lwfn_file;
error = lookup_lwfn_by_fond( path_fond, lwfn_file_name,
path_lwfn, sizeof ( path_lwfn ) );
if ( FT_Err_Ok == error )
have_lwfn = 1;
}
}
if ( have_lwfn && ( !have_sfnt || PREFER_LWFN ) )
error = FT_New_Face_From_LWFN( library,
path_lwfn,
face_index,
aface );
else
error = FT_Err_Unknown_File_Format;
found_no_lwfn_file:
if ( have_sfnt && FT_Err_Ok != error )
error = FT_New_Face_From_SFNT( library,
sfnt_id,
face_index,
aface );
return error;
}
/* Common function to load a new FT_Face from a resource file. */
static FT_Error
FT_New_Face_From_Resource( FT_Library library,
const UInt8* pathname,
FT_Long face_index,
FT_Face* aface )
{
OSType file_type;
FT_Error error;
/* LWFN is a (very) specific file format, check for it explicitly */
file_type = get_file_type_from_path( pathname );
if ( file_type == TTAG_LWFN )
return FT_New_Face_From_LWFN( library, pathname, face_index, aface );
/* Otherwise the file type doesn't matter (there are more than */
/* `FFIL' and `tfil'). Just try opening it as a font suitcase; */
/* if it works, fine. */
error = FT_New_Face_From_Suitcase( library, pathname, face_index, aface );
if ( error == 0 )
return error;
/* let it fall through to normal loader (.ttf, .otf, etc.); */
/* we signal this by returning no error and no FT_Face */
*aface = NULL;
return 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Face */
/* */
/* <Description> */
/* This is the Mac-specific implementation of FT_New_Face. In */
/* addition to the standard FT_New_Face() functionality, it also */
/* accepts pathnames to Mac suitcase files. For further */
/* documentation see the original FT_New_Face() in freetype.h. */
/* */
FT_EXPORT_DEF( FT_Error )
FT_New_Face( FT_Library library,
const char* pathname,
FT_Long face_index,
FT_Face* aface )
{
FT_Open_Args args;
FT_Error error;
/* test for valid `library' and `aface' delayed to FT_Open_Face() */
if ( !pathname )
return FT_Err_Invalid_Argument;
error = FT_Err_Ok;
*aface = NULL;
/* try resourcefork based font: LWFN, FFIL */
error = FT_New_Face_From_Resource( library, (UInt8 *)pathname,
face_index, aface );
if ( error != 0 || *aface != NULL )
return error;
/* let it fall through to normal loader (.ttf, .otf, etc.) */
args.flags = FT_OPEN_PATHNAME;
args.pathname = (char*)pathname;
return FT_Open_Face( library, &args, face_index, aface );
}
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Face_From_FSRef */
/* */
/* <Description> */
/* FT_New_Face_From_FSRef is identical to FT_New_Face except it */
/* accepts an FSRef instead of a path. */
/* */
/* This function is deprecated because Carbon data types (FSRef) */
/* are not cross-platform, and thus not suitable for the freetype API. */
FT_EXPORT_DEF( FT_Error )
FT_New_Face_From_FSRef( FT_Library library,
const FSRef* ref,
FT_Long face_index,
FT_Face* aface )
{
FT_Error error;
FT_Open_Args args;
OSErr err;
UInt8 pathname[PATH_MAX];
if ( !ref )
return FT_Err_Invalid_Argument;
err = FSRefMakePath( ref, pathname, sizeof ( pathname ) );
if ( err )
error = FT_Err_Cannot_Open_Resource;
error = FT_New_Face_From_Resource( library, pathname, face_index, aface );
if ( error != 0 || *aface != NULL )
return error;
/* fallback to datafork font */
args.flags = FT_OPEN_PATHNAME;
args.pathname = (char*)pathname;
return FT_Open_Face( library, &args, face_index, aface );
}
/*************************************************************************/
/* */
/* <Function> */
/* FT_New_Face_From_FSSpec */
/* */
/* <Description> */
/* FT_New_Face_From_FSSpec is identical to FT_New_Face except it */
/* accepts an FSSpec instead of a path. */
/* */
/* This function is deprecated because FSSpec is deprecated in Mac OS X */
FT_EXPORT_DEF( FT_Error )
FT_New_Face_From_FSSpec( FT_Library library,
const FSSpec* spec,
FT_Long face_index,
FT_Face* aface )
{
#if ( __LP64__ ) || ( defined( MAC_OS_X_VERSION_10_5 ) && \
( MAC_OS_X_VERSION_MIN_REQUIRED >= MAC_OS_X_VERSION_10_5 ) )
FT_UNUSED( library );
FT_UNUSED( spec );
FT_UNUSED( face_index );
FT_UNUSED( aface );
return FT_Err_Unimplemented_Feature;
#else
FSRef ref;
if ( !spec || FSpMakeFSRef( spec, &ref ) != noErr )
return FT_Err_Invalid_Argument;
else
return FT_New_Face_From_FSRef( library, &ref, face_index, aface );
#endif
}
/* FT_MACINTOSH */
#endif
/* END */
#endif
/* END */
/***************************************************************************/
/* */
/* ftbbox.c */
/* */
/* FreeType bbox computation (body). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2006, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used */
/* modified and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This component has a _single_ role: to compute exact outline bounding */
/* boxes. */
/* */
/*************************************************************************/
/***************************************************************************/
/* */
/* ftbbox.h */
/* */
/* FreeType exact bbox computation (specification). */
/* */
/* Copyright 1996-2001, 2003, 2007, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This component has a _single_ role: to compute exact outline bounding */
/* boxes. */
/* */
/* It is separated from the rest of the engine for various technical */
/* reasons. It may well be integrated in `ftoutln' later. */
/* */
/*************************************************************************/
#define __FTBBOX_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* outline_processing */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Get_BBox */
/* */
/* <Description> */
/* Compute the exact bounding box of an outline. This is slower */
/* than computing the control box. However, it uses an advanced */
/* algorithm which returns _very_ quickly when the two boxes */
/* coincide. Otherwise, the outline Bézier arcs are traversed to */
/* extract their extrema. */
/* */
/* <Input> */
/* outline :: A pointer to the source outline. */
/* */
/* <Output> */
/* abbox :: The outline's exact bounding box. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* If the font is tricky and the glyph has been loaded with */
/* @FT_LOAD_NO_SCALE, the resulting BBox is meaningless. To get */
/* reasonable values for the BBox it is necessary to load the glyph */
/* at a large ppem value (so that the hinting instructions can */
/* properly shift and scale the subglyphs), then extracting the BBox */
/* which can be eventually converted back to font units. */
/* */
FT_EXPORT( FT_Error )
FT_Outline_Get_BBox( FT_Outline* outline,
FT_BBox *abbox );
/* */
FT_END_HEADER
/* END */
/* Local Variables: */
/* coding: utf-8 */
/* End: */
typedef struct TBBox_Rec_
{
FT_Vector last;
FT_BBox bbox;
} TBBox_Rec;
/*************************************************************************/
/* */
/* <Function> */
/* BBox_Move_To */
/* */
/* <Description> */
/* This function is used as a `move_to' and `line_to' emitter during */
/* FT_Outline_Decompose(). It simply records the destination point */
/* in `user->last'; no further computations are necessary since we */
/* use the cbox as the starting bbox which must be refined. */
/* */
/* <Input> */
/* to :: A pointer to the destination vector. */
/* */
/* <InOut> */
/* user :: A pointer to the current walk context. */
/* */
/* <Return> */
/* Always 0. Needed for the interface only. */
/* */
static int
BBox_Move_To( FT_Vector* to,
TBBox_Rec* user )
{
user->last = *to;
return 0;
}
#define CHECK_X( p, bbox ) \
( p->x < bbox.xMin || p->x > bbox.xMax )
#define CHECK_Y( p, bbox ) \
( p->y < bbox.yMin || p->y > bbox.yMax )
/*************************************************************************/
/* */
/* <Function> */
/* BBox_Conic_Check */
/* */
/* <Description> */
/* Finds the extrema of a 1-dimensional conic Bezier curve and update */
/* a bounding range. This version uses direct computation, as it */
/* doesn't need square roots. */
/* */
/* <Input> */
/* y1 :: The start coordinate. */
/* */
/* y2 :: The coordinate of the control point. */
/* */
/* y3 :: The end coordinate. */
/* */
/* <InOut> */
/* min :: The address of the current minimum. */
/* */
/* max :: The address of the current maximum. */
/* */
static void
BBox_Conic_Check( FT_Pos y1,
FT_Pos y2,
FT_Pos y3,
FT_Pos* min,
FT_Pos* max )
{
/* flat arc */
if ( y1 <= y3 && y2 == y1 )
goto Suite;
if ( y1 < y3 )
{
/* ascending arc */
if ( y2 >= y1 && y2 <= y3 )
goto Suite;
}
else
{
/* descending arc */
if ( y2 >= y3 && y2 <= y1 )
{
y2 = y1;
y1 = y3;
y3 = y2;
goto Suite;
}
}
y1 = y3 = y1 - FT_MulDiv( y2 - y1, y2 - y1, y1 - 2*y2 + y3 );
Suite:
if ( y1 < *min ) *min = y1;
if ( y3 > *max ) *max = y3;
}
/*************************************************************************/
/* */
/* <Function> */
/* BBox_Conic_To */
/* */
/* <Description> */
/* This function is used as a `conic_to' emitter during */
/* FT_Outline_Decompose(). It checks a conic Bezier curve with the */
/* current bounding box, and computes its extrema if necessary to */
/* update it. */
/* */
/* <Input> */
/* control :: A pointer to a control point. */
/* */
/* to :: A pointer to the destination vector. */
/* */
/* <InOut> */
/* user :: The address of the current walk context. */
/* */
/* <Return> */
/* Always 0. Needed for the interface only. */
/* */
/* <Note> */
/* In the case of a non-monotonous arc, we compute directly the */
/* extremum coordinates, as it is sufficiently fast. */
/* */
static int
BBox_Conic_To( FT_Vector* control,
FT_Vector* to,
TBBox_Rec* user )
{
/* we don't need to check `to' since it is always an `on' point, thus */
/* within the bbox */
if ( CHECK_X( control, user->bbox ) )
BBox_Conic_Check( user->last.x,
control->x,
to->x,
&user->bbox.xMin,
&user->bbox.xMax );
if ( CHECK_Y( control, user->bbox ) )
BBox_Conic_Check( user->last.y,
control->y,
to->y,
&user->bbox.yMin,
&user->bbox.yMax );
user->last = *to;
return 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* BBox_Cubic_Check */
/* */
/* <Description> */
/* Finds the extrema of a 1-dimensional cubic Bezier curve and */
/* updates a bounding range. This version uses splitting because we */
/* don't want to use square roots and extra accuracy. */
/* */
/* <Input> */
/* p1 :: The start coordinate. */
/* */
/* p2 :: The coordinate of the first control point. */
/* */
/* p3 :: The coordinate of the second control point. */
/* */
/* p4 :: The end coordinate. */
/* */
/* <InOut> */
/* min :: The address of the current minimum. */
/* */
/* max :: The address of the current maximum. */
/* */
#if 0
static void
BBox_Cubic_Check( FT_Pos p1,
FT_Pos p2,
FT_Pos p3,
FT_Pos p4,
FT_Pos* min,
FT_Pos* max )
{
FT_Pos stack[32*3 + 1], *arc;
arc = stack;
arc[0] = p1;
arc[1] = p2;
arc[2] = p3;
arc[3] = p4;
do
{
FT_Pos y1 = arc[0];
FT_Pos y2 = arc[1];
FT_Pos y3 = arc[2];
FT_Pos y4 = arc[3];
if ( y1 == y4 )
{
/* flat */
if ( y1 == y2 && y1 == y3 )
goto Test;
}
else if ( y1 < y4 )
{
/* ascending */
if ( y2 >= y1 && y2 <= y4 && y3 >= y1 && y3 <= y4 )
goto Test;
}
else
{
/* descending */
if ( y2 >= y4 && y2 <= y1 && y3 >= y4 && y3 <= y1 )
{
y2 = y1;
y1 = y4;
y4 = y2;
goto Test;
}
}
/* unknown direction -- split the arc in two */
arc[6] = y4;
arc[1] = y1 = ( y1 + y2 ) / 2;
arc[5] = y4 = ( y4 + y3 ) / 2;
y2 = ( y2 + y3 ) / 2;
arc[2] = y1 = ( y1 + y2 ) / 2;
arc[4] = y4 = ( y4 + y2 ) / 2;
arc[3] = ( y1 + y4 ) / 2;
arc += 3;
goto Suite;
Test:
if ( y1 < *min ) *min = y1;
if ( y4 > *max ) *max = y4;
arc -= 3;
Suite:
;
} while ( arc >= stack );
}
#else
static void
test_cubic_extrema( FT_Pos y1,
FT_Pos y2,
FT_Pos y3,
FT_Pos y4,
FT_Fixed u,
FT_Pos* min,
FT_Pos* max )
{
/* FT_Pos a = y4 - 3*y3 + 3*y2 - y1; */
FT_Pos b = y3 - 2*y2 + y1;
FT_Pos c = y2 - y1;
FT_Pos d = y1;
FT_Pos y;
FT_Fixed uu;
FT_UNUSED ( y4 );
/* The polynomial is */
/* */
/* P(x) = a*x^3 + 3b*x^2 + 3c*x + d , */
/* */
/* dP/dx = 3a*x^2 + 6b*x + 3c . */
/* */
/* However, we also have */
/* */
/* dP/dx(u) = 0 , */
/* */
/* which implies by subtraction that */
/* */
/* P(u) = b*u^2 + 2c*u + d . */
if ( u > 0 && u < 0x10000L )
{
uu = FT_MulFix( u, u );
y = d + FT_MulFix( c, 2*u ) + FT_MulFix( b, uu );
if ( y < *min ) *min = y;
if ( y > *max ) *max = y;
}
}
static void
BBox_Cubic_Check( FT_Pos y1,
FT_Pos y2,
FT_Pos y3,
FT_Pos y4,
FT_Pos* min,
FT_Pos* max )
{
/* always compare first and last points */
if ( y1 < *min ) *min = y1;
else if ( y1 > *max ) *max = y1;
if ( y4 < *min ) *min = y4;
else if ( y4 > *max ) *max = y4;
/* now, try to see if there are split points here */
if ( y1 <= y4 )
{
/* flat or ascending arc test */
if ( y1 <= y2 && y2 <= y4 && y1 <= y3 && y3 <= y4 )
return;
}
/* y1 > y4 */
else
{
/* descending arc test */
if ( y1 >= y2 && y2 >= y4 && y1 >= y3 && y3 >= y4 )
return;
}
/* There are some split points. Find them. */
{
FT_Pos a = y4 - 3*y3 + 3*y2 - y1;
FT_Pos b = y3 - 2*y2 + y1;
FT_Pos c = y2 - y1;
FT_Pos d;
FT_Fixed t;
/* We need to solve `ax^2+2bx+c' here, without floating points! */
/* The trick is to normalize to a different representation in order */
/* to use our 16.16 fixed point routines. */
/* */
/* We compute FT_MulFix(b,b) and FT_MulFix(a,c) after normalization. */
/* These values must fit into a single 16.16 value. */
/* */
/* We normalize a, b, and c to `8.16' fixed float values to ensure */
/* that its product is held in a `16.16' value. */
{
FT_ULong t1, t2;
int shift = 0;
/* The following computation is based on the fact that for */
/* any value `y', if `n' is the position of the most */
/* significant bit of `abs(y)' (starting from 0 for the */
/* least significant bit), then `y' is in the range */
/* */
/* -2^n..2^n-1 */
/* */
/* We want to shift `a', `b', and `c' concurrently in order */
/* to ensure that they all fit in 8.16 values, which maps */
/* to the integer range `-2^23..2^23-1'. */
/* */
/* Necessarily, we need to shift `a', `b', and `c' so that */
/* the most significant bit of its absolute values is at */
/* _most_ at position 23. */
/* */
/* We begin by computing `t1' as the bitwise `OR' of the */
/* absolute values of `a', `b', `c'. */
t1 = (FT_ULong)( ( a >= 0 ) ? a : -a );
t2 = (FT_ULong)( ( b >= 0 ) ? b : -b );
t1 |= t2;
t2 = (FT_ULong)( ( c >= 0 ) ? c : -c );
t1 |= t2;
/* Now we can be sure that the most significant bit of `t1' */
/* is the most significant bit of either `a', `b', or `c', */
/* depending on the greatest integer range of the particular */
/* variable. */
/* */
/* Next, we compute the `shift', by shifting `t1' as many */
/* times as necessary to move its MSB to position 23. This */
/* corresponds to a value of `t1' that is in the range */
/* 0x40_0000..0x7F_FFFF. */
/* */
/* Finally, we shift `a', `b', and `c' by the same amount. */
/* This ensures that all values are now in the range */
/* -2^23..2^23, i.e., they are now expressed as 8.16 */
/* fixed-float numbers. This also means that we are using */
/* 24 bits of precision to compute the zeros, independently */
/* of the range of the original polynomial coefficients. */
/* */
/* This algorithm should ensure reasonably accurate values */
/* for the zeros. Note that they are only expressed with */
/* 16 bits when computing the extrema (the zeros need to */
/* be in 0..1 exclusive to be considered part of the arc). */
/* all coefficients are 0! */
if ( t1 == 0 )
return;
if ( t1 > 0x7FFFFFUL )
{
do
{
shift++;
t1 >>= 1;
} while ( t1 > 0x7FFFFFUL );
/* this loses some bits of precision, but we use 24 of them */
/* for the computation anyway */
a >>= shift;
b >>= shift;
c >>= shift;
}
else if ( t1 < 0x400000UL )
{
do
{
shift++;
t1 <<= 1;
} while ( t1 < 0x400000UL );
a <<= shift;
b <<= shift;
c <<= shift;
}
}
/* handle a == 0 */
if ( a == 0 )
{
if ( b != 0 )
{
t = - FT_DivFix( c, b ) / 2;
test_cubic_extrema( y1, y2, y3, y4, t, min, max );
}
}
else
{
/* solve the equation now */
d = FT_MulFix( b, b ) - FT_MulFix( a, c );
if ( d < 0 )
return;
if ( d == 0 )
{
/* there is a single split point at -b/a */
t = - FT_DivFix( b, a );
test_cubic_extrema( y1, y2, y3, y4, t, min, max );
}
else
{
/* there are two solutions; we need to filter them */
d = FT_SqrtFixed( (FT_Int32)d );
t = - FT_DivFix( b - d, a );
test_cubic_extrema( y1, y2, y3, y4, t, min, max );
t = - FT_DivFix( b + d, a );
test_cubic_extrema( y1, y2, y3, y4, t, min, max );
}
}
}
}
#endif
/*************************************************************************/
/* */
/* <Function> */
/* BBox_Cubic_To */
/* */
/* <Description> */
/* This function is used as a `cubic_to' emitter during */
/* FT_Outline_Decompose(). It checks a cubic Bezier curve with the */
/* current bounding box, and computes its extrema if necessary to */
/* update it. */
/* */
/* <Input> */
/* control1 :: A pointer to the first control point. */
/* */
/* control2 :: A pointer to the second control point. */
/* */
/* to :: A pointer to the destination vector. */
/* */
/* <InOut> */
/* user :: The address of the current walk context. */
/* */
/* <Return> */
/* Always 0. Needed for the interface only. */
/* */
/* <Note> */
/* In the case of a non-monotonous arc, we don't compute directly */
/* extremum coordinates, we subdivide instead. */
/* */
static int
BBox_Cubic_To( FT_Vector* control1,
FT_Vector* control2,
FT_Vector* to,
TBBox_Rec* user )
{
/* we don't need to check `to' since it is always an `on' point, thus */
/* within the bbox */
if ( CHECK_X( control1, user->bbox ) ||
CHECK_X( control2, user->bbox ) )
BBox_Cubic_Check( user->last.x,
control1->x,
control2->x,
to->x,
&user->bbox.xMin,
&user->bbox.xMax );
if ( CHECK_Y( control1, user->bbox ) ||
CHECK_Y( control2, user->bbox ) )
BBox_Cubic_Check( user->last.y,
control1->y,
control2->y,
to->y,
&user->bbox.yMin,
&user->bbox.yMax );
user->last = *to;
return 0;
}
FT_DEFINE_OUTLINE_FUNCS(bbox_interface,
(FT_Outline_MoveTo_Func) BBox_Move_To,
(FT_Outline_LineTo_Func) BBox_Move_To,
(FT_Outline_ConicTo_Func)BBox_Conic_To,
(FT_Outline_CubicTo_Func)BBox_Cubic_To,
0, 0
)
/* documentation is in ftbbox.h */
FT_EXPORT_DEF( FT_Error )
FT_Outline_Get_BBox( FT_Outline* outline,
FT_BBox *abbox )
{
FT_BBox cbox;
FT_BBox bbox;
FT_Vector* vec;
FT_UShort n;
if ( !abbox )
return FT_Err_Invalid_Argument;
if ( !outline )
return FT_Err_Invalid_Outline;
/* if outline is empty, return (0,0,0,0) */
if ( outline->n_points == 0 || outline->n_contours <= 0 )
{
abbox->xMin = abbox->xMax = 0;
abbox->yMin = abbox->yMax = 0;
return 0;
}
/* We compute the control box as well as the bounding box of */
/* all `on' points in the outline. Then, if the two boxes */
/* coincide, we exit immediately. */
vec = outline->points;
bbox.xMin = bbox.xMax = cbox.xMin = cbox.xMax = vec->x;
bbox.yMin = bbox.yMax = cbox.yMin = cbox.yMax = vec->y;
vec++;
for ( n = 1; n < outline->n_points; n++ )
{
FT_Pos x = vec->x;
FT_Pos y = vec->y;
/* update control box */
if ( x < cbox.xMin ) cbox.xMin = x;
if ( x > cbox.xMax ) cbox.xMax = x;
if ( y < cbox.yMin ) cbox.yMin = y;
if ( y > cbox.yMax ) cbox.yMax = y;
if ( FT_CURVE_TAG( outline->tags[n] ) == FT_CURVE_TAG_ON )
{
/* update bbox for `on' points only */
if ( x < bbox.xMin ) bbox.xMin = x;
if ( x > bbox.xMax ) bbox.xMax = x;
if ( y < bbox.yMin ) bbox.yMin = y;
if ( y > bbox.yMax ) bbox.yMax = y;
}
vec++;
}
/* test two boxes for equality */
if ( cbox.xMin < bbox.xMin || cbox.xMax > bbox.xMax ||
cbox.yMin < bbox.yMin || cbox.yMax > bbox.yMax )
{
/* the two boxes are different, now walk over the outline to */
/* get the Bezier arc extrema. */
FT_Error error;
TBBox_Rec user;
user.bbox = bbox;
error = FT_Outline_Decompose( outline, &bbox_interface, &user );
if ( error )
return error;
*abbox = user.bbox;
}
else
*abbox = bbox;
return FT_Err_Ok;
}
/* END */
/***************************************************************************/
/* */
/* ftglyph.c */
/* */
/* FreeType convenience functions to handle glyphs (body). */
/* */
/* Copyright 1996-2005, 2007, 2008, 2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file contains the definition of several convenience functions */
/* that can be used by client applications to easily retrieve glyph */
/* bitmaps and outlines from a given face. */
/* */
/* These functions should be optional if you are writing a font server */
/* or text layout engine on top of FreeType. However, they are pretty */
/* handy for many other simple uses of the library. */
/* */
/*************************************************************************/
/***************************************************************************/
/* */
/* ftbitmap.h */
/* */
/* FreeType utility functions for bitmaps (specification). */
/* */
/* Copyright 2004, 2005, 2006, 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTBITMAP_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* bitmap_handling */
/* */
/* <Title> */
/* Bitmap Handling */
/* */
/* <Abstract> */
/* Handling FT_Bitmap objects. */
/* */
/* <Description> */
/* This section contains functions for converting FT_Bitmap objects. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_Bitmap_New */
/* */
/* <Description> */
/* Initialize a pointer to an @FT_Bitmap structure. */
/* */
/* <InOut> */
/* abitmap :: A pointer to the bitmap structure. */
/* */
FT_EXPORT( void )
FT_Bitmap_New( FT_Bitmap *abitmap );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Bitmap_Copy */
/* */
/* <Description> */
/* Copy a bitmap into another one. */
/* */
/* <Input> */
/* library :: A handle to a library object. */
/* */
/* source :: A handle to the source bitmap. */
/* */
/* <Output> */
/* target :: A handle to the target bitmap. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
FT_EXPORT( FT_Error )
FT_Bitmap_Copy( FT_Library library,
const FT_Bitmap *source,
FT_Bitmap *target);
/*************************************************************************/
/* */
/* <Function> */
/* FT_Bitmap_Embolden */
/* */
/* <Description> */
/* Embolden a bitmap. The new bitmap will be about `xStrength' */
/* pixels wider and `yStrength' pixels higher. The left and bottom */
/* borders are kept unchanged. */
/* */
/* <Input> */
/* library :: A handle to a library object. */
/* */
/* xStrength :: How strong the glyph is emboldened horizontally. */
/* Expressed in 26.6 pixel format. */
/* */
/* yStrength :: How strong the glyph is emboldened vertically. */
/* Expressed in 26.6 pixel format. */
/* */
/* <InOut> */
/* bitmap :: A handle to the target bitmap. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* The current implementation restricts `xStrength' to be less than */
/* or equal to~8 if bitmap is of pixel_mode @FT_PIXEL_MODE_MONO. */
/* */
/* If you want to embolden the bitmap owned by a @FT_GlyphSlotRec, */
/* you should call @FT_GlyphSlot_Own_Bitmap on the slot first. */
/* */
FT_EXPORT( FT_Error )
FT_Bitmap_Embolden( FT_Library library,
FT_Bitmap* bitmap,
FT_Pos xStrength,
FT_Pos yStrength );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Bitmap_Convert */
/* */
/* <Description> */
/* Convert a bitmap object with depth 1bpp, 2bpp, 4bpp, or 8bpp to a */
/* bitmap object with depth 8bpp, making the number of used bytes per */
/* line (a.k.a. the `pitch') a multiple of `alignment'. */
/* */
/* <Input> */
/* library :: A handle to a library object. */
/* */
/* source :: The source bitmap. */
/* */
/* alignment :: The pitch of the bitmap is a multiple of this */
/* parameter. Common values are 1, 2, or 4. */
/* */
/* <Output> */
/* target :: The target bitmap. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* It is possible to call @FT_Bitmap_Convert multiple times without */
/* calling @FT_Bitmap_Done (the memory is simply reallocated). */
/* */
/* Use @FT_Bitmap_Done to finally remove the bitmap object. */
/* */
/* The `library' argument is taken to have access to FreeType's */
/* memory handling functions. */
/* */
FT_EXPORT( FT_Error )
FT_Bitmap_Convert( FT_Library library,
const FT_Bitmap *source,
FT_Bitmap *target,
FT_Int alignment );
/*************************************************************************/
/* */
/* <Function> */
/* FT_GlyphSlot_Own_Bitmap */
/* */
/* <Description> */
/* Make sure that a glyph slot owns `slot->bitmap'. */
/* */
/* <Input> */
/* slot :: The glyph slot. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* This function is to be used in combination with */
/* @FT_Bitmap_Embolden. */
/* */
FT_EXPORT( FT_Error )
FT_GlyphSlot_Own_Bitmap( FT_GlyphSlot slot );
/*************************************************************************/
/* */
/* <Function> */
/* FT_Bitmap_Done */
/* */
/* <Description> */
/* Destroy a bitmap object created with @FT_Bitmap_New. */
/* */
/* <Input> */
/* library :: A handle to a library object. */
/* */
/* bitmap :: The bitmap object to be freed. */
/* */
/* <Return> */
/* FreeType error code. 0~means success. */
/* */
/* <Note> */
/* The `library' argument is taken to have access to FreeType's */
/* memory handling functions. */
/* */
FT_EXPORT( FT_Error )
FT_Bitmap_Done( FT_Library library,
FT_Bitmap *bitmap );
/* */
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_glyph
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** FT_BitmapGlyph support ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
FT_CALLBACK_DEF( FT_Error )
ft_bitmap_glyph_init( FT_Glyph bitmap_glyph,
FT_GlyphSlot slot )
{
FT_BitmapGlyph glyph = (FT_BitmapGlyph)bitmap_glyph;
FT_Error error = FT_Err_Ok;
FT_Library library = FT_GLYPH( glyph )->library;
if ( slot->format != FT_GLYPH_FORMAT_BITMAP )
{
error = FT_Err_Invalid_Glyph_Format;
goto Exit;
}
glyph->left = slot->bitmap_left;
glyph->top = slot->bitmap_top;
/* do lazy copying whenever possible */
if ( slot->internal->flags & FT_GLYPH_OWN_BITMAP )
{
glyph->bitmap = slot->bitmap;
slot->internal->flags &= ~FT_GLYPH_OWN_BITMAP;
}
else
{
FT_Bitmap_New( &glyph->bitmap );
error = FT_Bitmap_Copy( library, &slot->bitmap, &glyph->bitmap );
}
Exit:
return error;
}
FT_CALLBACK_DEF( FT_Error )
ft_bitmap_glyph_copy( FT_Glyph bitmap_source,
FT_Glyph bitmap_target )
{
FT_Library library = bitmap_source->library;
FT_BitmapGlyph source = (FT_BitmapGlyph)bitmap_source;
FT_BitmapGlyph target = (FT_BitmapGlyph)bitmap_target;
target->left = source->left;
target->top = source->top;
return FT_Bitmap_Copy( library, &source->bitmap, &target->bitmap );
}
FT_CALLBACK_DEF( void )
ft_bitmap_glyph_done( FT_Glyph bitmap_glyph )
{
FT_BitmapGlyph glyph = (FT_BitmapGlyph)bitmap_glyph;
FT_Library library = FT_GLYPH( glyph )->library;
FT_Bitmap_Done( library, &glyph->bitmap );
}
FT_CALLBACK_DEF( void )
ft_bitmap_glyph_bbox( FT_Glyph bitmap_glyph,
FT_BBox* cbox )
{
FT_BitmapGlyph glyph = (FT_BitmapGlyph)bitmap_glyph;
cbox->xMin = glyph->left << 6;
cbox->xMax = cbox->xMin + ( glyph->bitmap.width << 6 );
cbox->yMax = glyph->top << 6;
cbox->yMin = cbox->yMax - ( glyph->bitmap.rows << 6 );
}
FT_DEFINE_GLYPH(ft_bitmap_glyph_class,
sizeof ( FT_BitmapGlyphRec ),
FT_GLYPH_FORMAT_BITMAP,
ft_bitmap_glyph_init,
ft_bitmap_glyph_done,
ft_bitmap_glyph_copy,
/* FT_Glyph_TransformFunc */
0,
ft_bitmap_glyph_bbox,
/* FT_Glyph_PrepareFunc */
0
)
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** FT_OutlineGlyph support ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
FT_CALLBACK_DEF( FT_Error )
ft_outline_glyph_init( FT_Glyph outline_glyph,
FT_GlyphSlot slot )
{
FT_OutlineGlyph glyph = (FT_OutlineGlyph)outline_glyph;
FT_Error error = FT_Err_Ok;
FT_Library library = FT_GLYPH( glyph )->library;
FT_Outline* source = &slot->outline;
FT_Outline* target = &glyph->outline;
/* check format in glyph slot */
if ( slot->format != FT_GLYPH_FORMAT_OUTLINE )
{
error = FT_Err_Invalid_Glyph_Format;
goto Exit;
}
/* allocate new outline */
error = FT_Outline_New( library, source->n_points, source->n_contours,
&glyph->outline );
if ( error )
goto Exit;
FT_Outline_Copy( source, target );
Exit:
return error;
}
FT_CALLBACK_DEF( void )
ft_outline_glyph_done( FT_Glyph outline_glyph )
{
FT_OutlineGlyph glyph = (FT_OutlineGlyph)outline_glyph;
FT_Outline_Done( FT_GLYPH( glyph )->library, &glyph->outline );
}
FT_CALLBACK_DEF( FT_Error )
ft_outline_glyph_copy( FT_Glyph outline_source,
FT_Glyph outline_target )
{
FT_OutlineGlyph source = (FT_OutlineGlyph)outline_source;
FT_OutlineGlyph target = (FT_OutlineGlyph)outline_target;
FT_Error error;
FT_Library library = FT_GLYPH( source )->library;
error = FT_Outline_New( library, source->outline.n_points,
source->outline.n_contours, &target->outline );
if ( !error )
FT_Outline_Copy( &source->outline, &target->outline );
return error;
}
FT_CALLBACK_DEF( void )
ft_outline_glyph_transform( FT_Glyph outline_glyph,
const FT_Matrix* matrix,
const FT_Vector* delta )
{
FT_OutlineGlyph glyph = (FT_OutlineGlyph)outline_glyph;
if ( matrix )
FT_Outline_Transform( &glyph->outline, matrix );
if ( delta )
FT_Outline_Translate( &glyph->outline, delta->x, delta->y );
}
FT_CALLBACK_DEF( void )
ft_outline_glyph_bbox( FT_Glyph outline_glyph,
FT_BBox* bbox )
{
FT_OutlineGlyph glyph = (FT_OutlineGlyph)outline_glyph;
FT_Outline_Get_CBox( &glyph->outline, bbox );
}
FT_CALLBACK_DEF( FT_Error )
ft_outline_glyph_prepare( FT_Glyph outline_glyph,
FT_GlyphSlot slot )
{
FT_OutlineGlyph glyph = (FT_OutlineGlyph)outline_glyph;
slot->format = FT_GLYPH_FORMAT_OUTLINE;
slot->outline = glyph->outline;
slot->outline.flags &= ~FT_OUTLINE_OWNER;
return FT_Err_Ok;
}
FT_DEFINE_GLYPH( ft_outline_glyph_class,
sizeof ( FT_OutlineGlyphRec ),
FT_GLYPH_FORMAT_OUTLINE,
ft_outline_glyph_init,
ft_outline_glyph_done,
ft_outline_glyph_copy,
ft_outline_glyph_transform,
ft_outline_glyph_bbox,
ft_outline_glyph_prepare
)
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** FT_Glyph class and API ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
static FT_Error
ft_new_glyph( FT_Library library,
const FT_Glyph_Class* clazz,
FT_Glyph* aglyph )
{
FT_Memory memory = library->memory;
FT_Error error;
FT_Glyph glyph = NULL;
*aglyph = 0;
if ( !FT_ALLOC( glyph, clazz->glyph_size ) )
{
glyph->library = library;
glyph->clazz = clazz;
glyph->format = clazz->glyph_format;
*aglyph = glyph;
}
return error;
}
/* documentation is in ftglyph.h */
FT_EXPORT_DEF( FT_Error )
FT_Glyph_Copy( FT_Glyph source,
FT_Glyph *target )
{
FT_Glyph copy;
FT_Error error;
const FT_Glyph_Class* clazz;
/* check arguments */
if ( !target )
{
error = FT_Err_Invalid_Argument;
goto Exit;
}
*target = 0;
if ( !source || !source->clazz )
{
error = FT_Err_Invalid_Argument;
goto Exit;
}
clazz = source->clazz;
error = ft_new_glyph( source->library, clazz, &copy );
if ( error )
goto Exit;
copy->advance = source->advance;
copy->format = source->format;
if ( clazz->glyph_copy )
error = clazz->glyph_copy( source, copy );
if ( error )
FT_Done_Glyph( copy );
else
*target = copy;
Exit:
return error;
}
/* documentation is in ftglyph.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_Glyph( FT_GlyphSlot slot,
FT_Glyph *aglyph )
{
FT_Library library;
FT_Error error;
FT_Glyph glyph;
const FT_Glyph_Class* clazz = 0;
if ( !slot )
return FT_Err_Invalid_Slot_Handle;
library = slot->library;
if ( !aglyph )
return FT_Err_Invalid_Argument;
/* if it is a bitmap, that's easy :-) */
if ( slot->format == FT_GLYPH_FORMAT_BITMAP )
clazz = FT_BITMAP_GLYPH_CLASS_GET;
/* if it is an outline */
else if ( slot->format == FT_GLYPH_FORMAT_OUTLINE )
clazz = FT_OUTLINE_GLYPH_CLASS_GET;
else
{
/* try to find a renderer that supports the glyph image format */
FT_Renderer render = FT_Lookup_Renderer( library, slot->format, 0 );
if ( render )
clazz = &render->glyph_class;
}
if ( !clazz )
{
error = FT_Err_Invalid_Glyph_Format;
goto Exit;
}
/* create FT_Glyph object */
error = ft_new_glyph( library, clazz, &glyph );
if ( error )
goto Exit;
/* copy advance while converting it to 16.16 format */
glyph->advance.x = slot->advance.x << 10;
glyph->advance.y = slot->advance.y << 10;
/* now import the image from the glyph slot */
error = clazz->glyph_init( glyph, slot );
/* if an error occurred, destroy the glyph */
if ( error )
FT_Done_Glyph( glyph );
else
*aglyph = glyph;
Exit:
return error;
}
/* documentation is in ftglyph.h */
FT_EXPORT_DEF( FT_Error )
FT_Glyph_Transform( FT_Glyph glyph,
FT_Matrix* matrix,
FT_Vector* delta )
{
const FT_Glyph_Class* clazz;
FT_Error error = FT_Err_Ok;
if ( !glyph || !glyph->clazz )
error = FT_Err_Invalid_Argument;
else
{
clazz = glyph->clazz;
if ( clazz->glyph_transform )
{
/* transform glyph image */
clazz->glyph_transform( glyph, matrix, delta );
/* transform advance vector */
if ( matrix )
FT_Vector_Transform( &glyph->advance, matrix );
}
else
error = FT_Err_Invalid_Glyph_Format;
}
return error;
}
/* documentation is in ftglyph.h */
FT_EXPORT_DEF( void )
FT_Glyph_Get_CBox( FT_Glyph glyph,
FT_UInt bbox_mode,
FT_BBox *acbox )
{
const FT_Glyph_Class* clazz;
if ( !acbox )
return;
acbox->xMin = acbox->yMin = acbox->xMax = acbox->yMax = 0;
if ( !glyph || !glyph->clazz )
return;
else
{
clazz = glyph->clazz;
if ( !clazz->glyph_bbox )
return;
else
{
/* retrieve bbox in 26.6 coordinates */
clazz->glyph_bbox( glyph, acbox );
/* perform grid fitting if needed */
if ( bbox_mode == FT_GLYPH_BBOX_GRIDFIT ||
bbox_mode == FT_GLYPH_BBOX_PIXELS )
{
acbox->xMin = FT_PIX_FLOOR( acbox->xMin );
acbox->yMin = FT_PIX_FLOOR( acbox->yMin );
acbox->xMax = FT_PIX_CEIL( acbox->xMax );
acbox->yMax = FT_PIX_CEIL( acbox->yMax );
}
/* convert to integer pixels if needed */
if ( bbox_mode == FT_GLYPH_BBOX_TRUNCATE ||
bbox_mode == FT_GLYPH_BBOX_PIXELS )
{
acbox->xMin >>= 6;
acbox->yMin >>= 6;
acbox->xMax >>= 6;
acbox->yMax >>= 6;
}
}
}
return;
}
/* documentation is in ftglyph.h */
FT_EXPORT_DEF( FT_Error )
FT_Glyph_To_Bitmap( FT_Glyph* the_glyph,
FT_Render_Mode render_mode,
FT_Vector* origin,
FT_Bool destroy )
{
FT_GlyphSlotRec dummy;
FT_GlyphSlot_InternalRec dummy_internal;
FT_Error error = FT_Err_Ok;
FT_Glyph b, glyph;
FT_BitmapGlyph bitmap = NULL;
const FT_Glyph_Class* clazz;
/* FT_BITMAP_GLYPH_CLASS_GET derefers `library' in PIC mode */
FT_Library library;
/* check argument */
if ( !the_glyph )
goto Bad;
glyph = *the_glyph;
if ( !glyph )
goto Bad;
clazz = glyph->clazz;
library = glyph->library;
if ( !library || !clazz )
goto Bad;
/* when called with a bitmap glyph, do nothing and return successfully */
if ( clazz == FT_BITMAP_GLYPH_CLASS_GET )
goto Exit;
if ( !clazz->glyph_prepare )
goto Bad;
/* we render the glyph into a glyph bitmap using a `dummy' glyph slot */
/* then calling FT_Render_Glyph_Internal() */
FT_MEM_ZERO( &dummy, sizeof ( dummy ) );
FT_MEM_ZERO( &dummy_internal, sizeof ( dummy_internal ) );
dummy.internal = &dummy_internal;
dummy.library = library;
dummy.format = clazz->glyph_format;
/* create result bitmap glyph */
error = ft_new_glyph( library, FT_BITMAP_GLYPH_CLASS_GET, &b );
if ( error )
goto Exit;
bitmap = (FT_BitmapGlyph)b;
#if 1
/* if `origin' is set, translate the glyph image */
if ( origin )
FT_Glyph_Transform( glyph, 0, origin );
#else
FT_UNUSED( origin );
#endif
/* prepare dummy slot for rendering */
error = clazz->glyph_prepare( glyph, &dummy );
if ( !error )
error = FT_Render_Glyph_Internal( glyph->library, &dummy, render_mode );
#if 1
if ( !destroy && origin )
{
FT_Vector v;
v.x = -origin->x;
v.y = -origin->y;
FT_Glyph_Transform( glyph, 0, &v );
}
#endif
if ( error )
goto Exit;
/* in case of success, copy the bitmap to the glyph bitmap */
error = ft_bitmap_glyph_init( (FT_Glyph)bitmap, &dummy );
if ( error )
goto Exit;
/* copy advance */
bitmap->root.advance = glyph->advance;
if ( destroy )
FT_Done_Glyph( glyph );
*the_glyph = FT_GLYPH( bitmap );
Exit:
if ( error && bitmap )
FT_Done_Glyph( FT_GLYPH( bitmap ) );
return error;
Bad:
error = FT_Err_Invalid_Argument;
goto Exit;
}
/* documentation is in ftglyph.h */
FT_EXPORT_DEF( void )
FT_Done_Glyph( FT_Glyph glyph )
{
if ( glyph )
{
FT_Memory memory = glyph->library->memory;
const FT_Glyph_Class* clazz = glyph->clazz;
if ( clazz->glyph_done )
clazz->glyph_done( glyph );
FT_FREE( glyph );
}
}
/* END */
/***************************************************************************/
/* */
/* ftbitmap.c */
/* */
/* FreeType utility functions for bitmaps (body). */
/* */
/* Copyright 2004-2009, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
static
const FT_Bitmap null_bitmap = { 0, 0, 0, 0, 0, 0, 0, 0 };
/* documentation is in ftbitmap.h */
FT_EXPORT_DEF( void )
FT_Bitmap_New( FT_Bitmap *abitmap )
{
*abitmap = null_bitmap;
}
/* documentation is in ftbitmap.h */
FT_EXPORT_DEF( FT_Error )
FT_Bitmap_Copy( FT_Library library,
const FT_Bitmap *source,
FT_Bitmap *target)
{
FT_Memory memory = library->memory;
FT_Error error = FT_Err_Ok;
FT_Int pitch = source->pitch;
FT_ULong size;
if ( source == target )
return FT_Err_Ok;
if ( source->buffer == NULL )
{
*target = *source;
return FT_Err_Ok;
}
if ( pitch < 0 )
pitch = -pitch;
size = (FT_ULong)( pitch * source->rows );
if ( target->buffer )
{
FT_Int target_pitch = target->pitch;
FT_ULong target_size;
if ( target_pitch < 0 )
target_pitch = -target_pitch;
target_size = (FT_ULong)( target_pitch * target->rows );
if ( target_size != size )
(void)FT_QREALLOC( target->buffer, target_size, size );
}
else
(void)FT_QALLOC( target->buffer, size );
if ( !error )
{
unsigned char *p;
p = target->buffer;
*target = *source;
target->buffer = p;
FT_MEM_COPY( target->buffer, source->buffer, size );
}
return error;
}
static FT_Error
ft_bitmap_assure_buffer( FT_Memory memory,
FT_Bitmap* bitmap,
FT_UInt xpixels,
FT_UInt ypixels )
{
FT_Error error;
int pitch;
int new_pitch;
FT_UInt bpp;
FT_Int i, width, height;
unsigned char* buffer = NULL;
width = bitmap->width;
height = bitmap->rows;
pitch = bitmap->pitch;
if ( pitch < 0 )
pitch = -pitch;
switch ( bitmap->pixel_mode )
{
case FT_PIXEL_MODE_MONO:
bpp = 1;
new_pitch = ( width + xpixels + 7 ) >> 3;
break;
case FT_PIXEL_MODE_GRAY2:
bpp = 2;
new_pitch = ( width + xpixels + 3 ) >> 2;
break;
case FT_PIXEL_MODE_GRAY4:
bpp = 4;
new_pitch = ( width + xpixels + 1 ) >> 1;
break;
case FT_PIXEL_MODE_GRAY:
case FT_PIXEL_MODE_LCD:
case FT_PIXEL_MODE_LCD_V:
bpp = 8;
new_pitch = ( width + xpixels );
break;
default:
return FT_Err_Invalid_Glyph_Format;
}
/* if no need to allocate memory */
if ( ypixels == 0 && new_pitch <= pitch )
{
/* zero the padding */
FT_Int bit_width = pitch * 8;
FT_Int bit_last = ( width + xpixels ) * bpp;
if ( bit_last < bit_width )
{
FT_Byte* line = bitmap->buffer + ( bit_last >> 3 );
FT_Byte* end = bitmap->buffer + pitch;
FT_Int shift = bit_last & 7;
FT_UInt mask = 0xFF00U >> shift;
FT_Int count = height;
for ( ; count > 0; count--, line += pitch, end += pitch )
{
FT_Byte* write = line;
if ( shift > 0 )
{
write[0] = (FT_Byte)( write[0] & mask );
write++;
}
if ( write < end )
FT_MEM_ZERO( write, end-write );
}
}
return FT_Err_Ok;
}
if ( FT_QALLOC_MULT( buffer, new_pitch, bitmap->rows + ypixels ) )
return error;
if ( bitmap->pitch > 0 )
{
FT_Int len = ( width * bpp + 7 ) >> 3;
for ( i = 0; i < bitmap->rows; i++ )
FT_MEM_COPY( buffer + new_pitch * ( ypixels + i ),
bitmap->buffer + pitch * i, len );
}
else
{
FT_Int len = ( width * bpp + 7 ) >> 3;
for ( i = 0; i < bitmap->rows; i++ )
FT_MEM_COPY( buffer + new_pitch * i,
bitmap->buffer + pitch * i, len );
}
FT_FREE( bitmap->buffer );
bitmap->buffer = buffer;
if ( bitmap->pitch < 0 )
new_pitch = -new_pitch;
/* set pitch only, width and height are left untouched */
bitmap->pitch = new_pitch;
return FT_Err_Ok;
}
/* documentation is in ftbitmap.h */
FT_EXPORT_DEF( FT_Error )
FT_Bitmap_Embolden( FT_Library library,
FT_Bitmap* bitmap,
FT_Pos xStrength,
FT_Pos yStrength )
{
FT_Error error;
unsigned char* p;
FT_Int i, x, y, pitch;
FT_Int xstr, ystr;
if ( !library )
return FT_Err_Invalid_Library_Handle;
if ( !bitmap || !bitmap->buffer )
return FT_Err_Invalid_Argument;
if ( ( ( FT_PIX_ROUND( xStrength ) >> 6 ) > FT_INT_MAX ) ||
( ( FT_PIX_ROUND( yStrength ) >> 6 ) > FT_INT_MAX ) )
return FT_Err_Invalid_Argument;
xstr = (FT_Int)FT_PIX_ROUND( xStrength ) >> 6;
ystr = (FT_Int)FT_PIX_ROUND( yStrength ) >> 6;
if ( xstr == 0 && ystr == 0 )
return FT_Err_Ok;
else if ( xstr < 0 || ystr < 0 )
return FT_Err_Invalid_Argument;
switch ( bitmap->pixel_mode )
{
case FT_PIXEL_MODE_GRAY2:
case FT_PIXEL_MODE_GRAY4:
{
FT_Bitmap tmp;
FT_Int align;
if ( bitmap->pixel_mode == FT_PIXEL_MODE_GRAY2 )
align = ( bitmap->width + xstr + 3 ) / 4;
else
align = ( bitmap->width + xstr + 1 ) / 2;
FT_Bitmap_New( &tmp );
error = FT_Bitmap_Convert( library, bitmap, &tmp, align );
if ( error )
return error;
FT_Bitmap_Done( library, bitmap );
*bitmap = tmp;
}
break;
case FT_PIXEL_MODE_MONO:
if ( xstr > 8 )
xstr = 8;
break;
case FT_PIXEL_MODE_LCD:
xstr *= 3;
break;
case FT_PIXEL_MODE_LCD_V:
ystr *= 3;
break;
}
error = ft_bitmap_assure_buffer( library->memory, bitmap, xstr, ystr );
if ( error )
return error;
pitch = bitmap->pitch;
if ( pitch > 0 )
p = bitmap->buffer + pitch * ystr;
else
{
pitch = -pitch;
p = bitmap->buffer + pitch * ( bitmap->rows - 1 );
}
/* for each row */
for ( y = 0; y < bitmap->rows ; y++ )
{
/*
* Horizontally:
*
* From the last pixel on, make each pixel or'ed with the
* `xstr' pixels before it.
*/
for ( x = pitch - 1; x >= 0; x-- )
{
unsigned char tmp;
tmp = p[x];
for ( i = 1; i <= xstr; i++ )
{
if ( bitmap->pixel_mode == FT_PIXEL_MODE_MONO )
{
p[x] |= tmp >> i;
/* the maximum value of 8 for `xstr' comes from here */
if ( x > 0 )
p[x] |= p[x - 1] << ( 8 - i );
#if 0
if ( p[x] == 0xff )
break;
#endif
}
else
{
if ( x - i >= 0 )
{
if ( p[x] + p[x - i] > bitmap->num_grays - 1 )
{
p[x] = (unsigned char)(bitmap->num_grays - 1);
break;
}
else
{
p[x] = (unsigned char)(p[x] + p[x-i]);
if ( p[x] == bitmap->num_grays - 1 )
break;
}
}
else
break;
}
}
}
/*
* Vertically:
*
* Make the above `ystr' rows or'ed with it.
*/
for ( x = 1; x <= ystr; x++ )
{
unsigned char* q;
q = p - bitmap->pitch * x;
for ( i = 0; i < pitch; i++ )
q[i] |= p[i];
}
p += bitmap->pitch;
}
bitmap->width += xstr;
bitmap->rows += ystr;
return FT_Err_Ok;
}
/* documentation is in ftbitmap.h */
FT_EXPORT_DEF( FT_Error )
FT_Bitmap_Convert( FT_Library library,
const FT_Bitmap *source,
FT_Bitmap *target,
FT_Int alignment )
{
FT_Error error = FT_Err_Ok;
FT_Memory memory;
if ( !library )
return FT_Err_Invalid_Library_Handle;
memory = library->memory;
switch ( source->pixel_mode )
{
case FT_PIXEL_MODE_MONO:
case FT_PIXEL_MODE_GRAY:
case FT_PIXEL_MODE_GRAY2:
case FT_PIXEL_MODE_GRAY4:
case FT_PIXEL_MODE_LCD:
case FT_PIXEL_MODE_LCD_V:
{
FT_Int pad;
FT_Long old_size;
old_size = target->rows * target->pitch;
if ( old_size < 0 )
old_size = -old_size;
target->pixel_mode = FT_PIXEL_MODE_GRAY;
target->rows = source->rows;
target->width = source->width;
pad = 0;
if ( alignment > 0 )
{
pad = source->width % alignment;
if ( pad != 0 )
pad = alignment - pad;
}
target->pitch = source->width + pad;
if ( target->pitch > 0 &&
(FT_ULong)target->rows > FT_ULONG_MAX / target->pitch )
return FT_Err_Invalid_Argument;
if ( target->rows * target->pitch > old_size &&
FT_QREALLOC( target->buffer,
old_size, target->rows * target->pitch ) )
return error;
}
break;
default:
error = FT_Err_Invalid_Argument;
}
switch ( source->pixel_mode )
{
case FT_PIXEL_MODE_MONO:
{
FT_Byte* s = source->buffer;
FT_Byte* t = target->buffer;
FT_Int i;
target->num_grays = 2;
for ( i = source->rows; i > 0; i-- )
{
FT_Byte* ss = s;
FT_Byte* tt = t;
FT_Int j;
/* get the full bytes */
for ( j = source->width >> 3; j > 0; j-- )
{
/* avoid a byte->int cast on each line */
FT_Int val = ss[0];
tt[0] = (FT_Byte)( ( val & 0x80 ) >> 7 );
tt[1] = (FT_Byte)( ( val & 0x40 ) >> 6 );
tt[2] = (FT_Byte)( ( val & 0x20 ) >> 5 );
tt[3] = (FT_Byte)( ( val & 0x10 ) >> 4 );
tt[4] = (FT_Byte)( ( val & 0x08 ) >> 3 );
tt[5] = (FT_Byte)( ( val & 0x04 ) >> 2 );
tt[6] = (FT_Byte)( ( val & 0x02 ) >> 1 );
tt[7] = (FT_Byte)( val & 0x01 );
tt += 8;
ss += 1;
}
/* get remaining pixels (if any) */
j = source->width & 7;
if ( j > 0 )
{
FT_Int val = *ss;
for ( ; j > 0; j-- )
{
tt[0] = (FT_Byte)( ( val & 0x80 ) >> 7);
val <<= 1;
tt += 1;
}
}
s += source->pitch;
t += target->pitch;
}
}
break;
case FT_PIXEL_MODE_GRAY:
case FT_PIXEL_MODE_LCD:
case FT_PIXEL_MODE_LCD_V:
{
FT_Int width = source->width;
FT_Byte* s = source->buffer;
FT_Byte* t = target->buffer;
FT_Int s_pitch = source->pitch;
FT_Int t_pitch = target->pitch;
FT_Int i;
target->num_grays = 256;
for ( i = source->rows; i > 0; i-- )
{
FT_ARRAY_COPY( t, s, width );
s += s_pitch;
t += t_pitch;
}
}
break;
case FT_PIXEL_MODE_GRAY2:
{
FT_Byte* s = source->buffer;
FT_Byte* t = target->buffer;
FT_Int i;
target->num_grays = 4;
for ( i = source->rows; i > 0; i-- )
{
FT_Byte* ss = s;
FT_Byte* tt = t;
FT_Int j;
/* get the full bytes */
for ( j = source->width >> 2; j > 0; j-- )
{
FT_Int val = ss[0];
tt[0] = (FT_Byte)( ( val & 0xC0 ) >> 6 );
tt[1] = (FT_Byte)( ( val & 0x30 ) >> 4 );
tt[2] = (FT_Byte)( ( val & 0x0C ) >> 2 );
tt[3] = (FT_Byte)( ( val & 0x03 ) );
ss += 1;
tt += 4;
}
j = source->width & 3;
if ( j > 0 )
{
FT_Int val = ss[0];
for ( ; j > 0; j-- )
{
tt[0] = (FT_Byte)( ( val & 0xC0 ) >> 6 );
val <<= 2;
tt += 1;
}
}
s += source->pitch;
t += target->pitch;
}
}
break;
case FT_PIXEL_MODE_GRAY4:
{
FT_Byte* s = source->buffer;
FT_Byte* t = target->buffer;
FT_Int i;
target->num_grays = 16;
for ( i = source->rows; i > 0; i-- )
{
FT_Byte* ss = s;
FT_Byte* tt = t;
FT_Int j;
/* get the full bytes */
for ( j = source->width >> 1; j > 0; j-- )
{
FT_Int val = ss[0];
tt[0] = (FT_Byte)( ( val & 0xF0 ) >> 4 );
tt[1] = (FT_Byte)( ( val & 0x0F ) );
ss += 1;
tt += 2;
}
if ( source->width & 1 )
tt[0] = (FT_Byte)( ( ss[0] & 0xF0 ) >> 4 );
s += source->pitch;
t += target->pitch;
}
}
break;
default:
;
}
return error;
}
/* documentation is in ftbitmap.h */
FT_EXPORT_DEF( FT_Error )
FT_GlyphSlot_Own_Bitmap( FT_GlyphSlot slot )
{
if ( slot && slot->format == FT_GLYPH_FORMAT_BITMAP &&
!( slot->internal->flags & FT_GLYPH_OWN_BITMAP ) )
{
FT_Bitmap bitmap;
FT_Error error;
FT_Bitmap_New( &bitmap );
error = FT_Bitmap_Copy( slot->library, &slot->bitmap, &bitmap );
if ( error )
return error;
slot->bitmap = bitmap;
slot->internal->flags |= FT_GLYPH_OWN_BITMAP;
}
return FT_Err_Ok;
}
/* documentation is in ftbitmap.h */
FT_EXPORT_DEF( FT_Error )
FT_Bitmap_Done( FT_Library library,
FT_Bitmap *bitmap )
{
FT_Memory memory;
if ( !library )
return FT_Err_Invalid_Library_Handle;
if ( !bitmap )
return FT_Err_Invalid_Argument;
memory = library->memory;
FT_FREE( bitmap->buffer );
*bitmap = null_bitmap;
return FT_Err_Ok;
}
/* END */
/***************************************************************************/
/* */
/* ftbdf.c */
/* */
/* FreeType API for accessing BDF-specific strings (body). */
/* */
/* Copyright 2002, 2003, 2004 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* svbdf.h */
/* */
/* The FreeType BDF services (specification). */
/* */
/* Copyright 2003, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVBDF_H__
/***************************************************************************/
/* */
/* ftbdf.h */
/* */
/* FreeType API for accessing BDF-specific strings (specification). */
/* */
/* Copyright 2002, 2003, 2004, 2006, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTBDF_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* bdf_fonts */
/* */
/* <Title> */
/* BDF and PCF Files */
/* */
/* <Abstract> */
/* BDF and PCF specific API. */
/* */
/* <Description> */
/* This section contains the declaration of functions specific to BDF */
/* and PCF fonts. */
/* */
/*************************************************************************/
/**********************************************************************
*
* @enum:
* FT_PropertyType
*
* @description:
* A list of BDF property types.
*
* @values:
* BDF_PROPERTY_TYPE_NONE ::
* Value~0 is used to indicate a missing property.
*
* BDF_PROPERTY_TYPE_ATOM ::
* Property is a string atom.
*
* BDF_PROPERTY_TYPE_INTEGER ::
* Property is a 32-bit signed integer.
*
* BDF_PROPERTY_TYPE_CARDINAL ::
* Property is a 32-bit unsigned integer.
*/
typedef enum BDF_PropertyType_
{
BDF_PROPERTY_TYPE_NONE = 0,
BDF_PROPERTY_TYPE_ATOM = 1,
BDF_PROPERTY_TYPE_INTEGER = 2,
BDF_PROPERTY_TYPE_CARDINAL = 3
} BDF_PropertyType;
/**********************************************************************
*
* @type:
* BDF_Property
*
* @description:
* A handle to a @BDF_PropertyRec structure to model a given
* BDF/PCF property.
*/
typedef struct BDF_PropertyRec_* BDF_Property;
/**********************************************************************
*
* @struct:
* BDF_PropertyRec
*
* @description:
* This structure models a given BDF/PCF property.
*
* @fields:
* type ::
* The property type.
*
* u.atom ::
* The atom string, if type is @BDF_PROPERTY_TYPE_ATOM.
*
* u.integer ::
* A signed integer, if type is @BDF_PROPERTY_TYPE_INTEGER.
*
* u.cardinal ::
* An unsigned integer, if type is @BDF_PROPERTY_TYPE_CARDINAL.
*/
typedef struct BDF_PropertyRec_
{
BDF_PropertyType type;
union {
const char* atom;
FT_Int32 integer;
FT_UInt32 cardinal;
} u;
} BDF_PropertyRec;
/**********************************************************************
*
* @function:
* FT_Get_BDF_Charset_ID
*
* @description:
* Retrieve a BDF font character set identity, according to
* the BDF specification.
*
* @input:
* face ::
* A handle to the input face.
*
* @output:
* acharset_encoding ::
* Charset encoding, as a C~string, owned by the face.
*
* acharset_registry ::
* Charset registry, as a C~string, owned by the face.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function only works with BDF faces, returning an error otherwise.
*/
FT_EXPORT( FT_Error )
FT_Get_BDF_Charset_ID( FT_Face face,
const char* *acharset_encoding,
const char* *acharset_registry );
/**********************************************************************
*
* @function:
* FT_Get_BDF_Property
*
* @description:
* Retrieve a BDF property from a BDF or PCF font file.
*
* @input:
* face :: A handle to the input face.
*
* name :: The property name.
*
* @output:
* aproperty :: The property.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function works with BDF _and_ PCF fonts. It returns an error
* otherwise. It also returns an error if the property is not in the
* font.
*
* A `property' is a either key-value pair within the STARTPROPERTIES
* ... ENDPROPERTIES block of a BDF font or a key-value pair from the
* `info->props' array within a `FontRec' structure of a PCF font.
*
* Integer properties are always stored as `signed' within PCF fonts;
* consequently, @BDF_PROPERTY_TYPE_CARDINAL is a possible return value
* for BDF fonts only.
*
* In case of error, `aproperty->type' is always set to
* @BDF_PROPERTY_TYPE_NONE.
*/
FT_EXPORT( FT_Error )
FT_Get_BDF_Property( FT_Face face,
const char* prop_name,
BDF_PropertyRec *aproperty );
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
#define FT_SERVICE_ID_BDF "bdf"
typedef FT_Error
(*FT_BDF_GetCharsetIdFunc)( FT_Face face,
const char* *acharset_encoding,
const char* *acharset_registry );
typedef FT_Error
(*FT_BDF_GetPropertyFunc)( FT_Face face,
const char* prop_name,
BDF_PropertyRec *aproperty );
FT_DEFINE_SERVICE( BDF )
{
FT_BDF_GetCharsetIdFunc get_charset_id;
FT_BDF_GetPropertyFunc get_property;
};
#define FT_DEFINE_SERVICE_BDFRec( class_, \
get_charset_id_, \
get_property_ ) \
static const FT_Service_BDFRec class_ = \
{ \
get_charset_id_, get_property_ \
};
/* */
FT_END_HEADER
/* END */
/* documentation is in ftbdf.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_BDF_Charset_ID( FT_Face face,
const char* *acharset_encoding,
const char* *acharset_registry )
{
FT_Error error;
const char* encoding = NULL;
const char* registry = NULL;
error = FT_Err_Invalid_Argument;
if ( face )
{
FT_Service_BDF service;
FT_FACE_FIND_SERVICE( face, service, BDF );
if ( service && service->get_charset_id )
error = service->get_charset_id( face, &encoding, &registry );
}
if ( acharset_encoding )
*acharset_encoding = encoding;
if ( acharset_registry )
*acharset_registry = registry;
return error;
}
/* documentation is in ftbdf.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_BDF_Property( FT_Face face,
const char* prop_name,
BDF_PropertyRec *aproperty )
{
FT_Error error;
error = FT_Err_Invalid_Argument;
aproperty->type = BDF_PROPERTY_TYPE_NONE;
if ( face )
{
FT_Service_BDF service;
FT_FACE_FIND_SERVICE( face, service, BDF );
if ( service && service->get_property )
error = service->get_property( face, prop_name, aproperty );
}
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftcid.c */
/* */
/* FreeType API for accessing CID font information. */
/* */
/* Copyright 2007, 2009 by Derek Clegg, Michael Toftdal. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftcid.h */
/* */
/* FreeType API for accessing CID font information (specification). */
/* */
/* Copyright 2007, 2009 by Dereg Clegg, Michael Toftdal. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTCID_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* cid_fonts */
/* */
/* <Title> */
/* CID Fonts */
/* */
/* <Abstract> */
/* CID-keyed font specific API. */
/* */
/* <Description> */
/* This section contains the declaration of CID-keyed font specific */
/* functions. */
/* */
/*************************************************************************/
/**********************************************************************
*
* @function:
* FT_Get_CID_Registry_Ordering_Supplement
*
* @description:
* Retrieve the Registry/Ordering/Supplement triple (also known as the
* "R/O/S") from a CID-keyed font.
*
* @input:
* face ::
* A handle to the input face.
*
* @output:
* registry ::
* The registry, as a C~string, owned by the face.
*
* ordering ::
* The ordering, as a C~string, owned by the face.
*
* supplement ::
* The supplement.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function only works with CID faces, returning an error
* otherwise.
*
* @since:
* 2.3.6
*/
FT_EXPORT( FT_Error )
FT_Get_CID_Registry_Ordering_Supplement( FT_Face face,
const char* *registry,
const char* *ordering,
FT_Int *supplement);
/**********************************************************************
*
* @function:
* FT_Get_CID_Is_Internally_CID_Keyed
*
* @description:
* Retrieve the type of the input face, CID keyed or not. In
* constrast to the @FT_IS_CID_KEYED macro this function returns
* successfully also for CID-keyed fonts in an SNFT wrapper.
*
* @input:
* face ::
* A handle to the input face.
*
* @output:
* is_cid ::
* The type of the face as an @FT_Bool.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function only works with CID faces and OpenType fonts,
* returning an error otherwise.
*
* @since:
* 2.3.9
*/
FT_EXPORT( FT_Error )
FT_Get_CID_Is_Internally_CID_Keyed( FT_Face face,
FT_Bool *is_cid );
/**********************************************************************
*
* @function:
* FT_Get_CID_From_Glyph_Index
*
* @description:
* Retrieve the CID of the input glyph index.
*
* @input:
* face ::
* A handle to the input face.
*
* glyph_index ::
* The input glyph index.
*
* @output:
* cid ::
* The CID as an @FT_UInt.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function only works with CID faces and OpenType fonts,
* returning an error otherwise.
*
* @since:
* 2.3.9
*/
FT_EXPORT( FT_Error )
FT_Get_CID_From_Glyph_Index( FT_Face face,
FT_UInt glyph_index,
FT_UInt *cid );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* svcid.h */
/* */
/* The FreeType CID font services (specification). */
/* */
/* Copyright 2007, 2009, 2012 by Derek Clegg, Michael Toftdal. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVCID_H__
FT_BEGIN_HEADER
#define FT_SERVICE_ID_CID "CID"
typedef FT_Error
(*FT_CID_GetRegistryOrderingSupplementFunc)( FT_Face face,
const char* *registry,
const char* *ordering,
FT_Int *supplement );
typedef FT_Error
(*FT_CID_GetIsInternallyCIDKeyedFunc)( FT_Face face,
FT_Bool *is_cid );
typedef FT_Error
(*FT_CID_GetCIDFromGlyphIndexFunc)( FT_Face face,
FT_UInt glyph_index,
FT_UInt *cid );
FT_DEFINE_SERVICE( CID )
{
FT_CID_GetRegistryOrderingSupplementFunc get_ros;
FT_CID_GetIsInternallyCIDKeyedFunc get_is_cid;
FT_CID_GetCIDFromGlyphIndexFunc get_cid_from_glyph_index;
};
#define FT_DEFINE_SERVICE_CIDREC( class_, \
get_ros_, \
get_is_cid_, \
get_cid_from_glyph_index_ ) \
static const FT_Service_CIDRec class_ = \
{ \
get_ros_, get_is_cid_, get_cid_from_glyph_index_ \
};
/* */
FT_END_HEADER
/* END */
/* documentation is in ftcid.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_CID_Registry_Ordering_Supplement( FT_Face face,
const char* *registry,
const char* *ordering,
FT_Int *supplement)
{
FT_Error error;
const char* r = NULL;
const char* o = NULL;
FT_Int s = 0;
error = FT_Err_Invalid_Argument;
if ( face )
{
FT_Service_CID service;
FT_FACE_FIND_SERVICE( face, service, CID );
if ( service && service->get_ros )
error = service->get_ros( face, &r, &o, &s );
}
if ( registry )
*registry = r;
if ( ordering )
*ordering = o;
if ( supplement )
*supplement = s;
return error;
}
FT_EXPORT_DEF( FT_Error )
FT_Get_CID_Is_Internally_CID_Keyed( FT_Face face,
FT_Bool *is_cid )
{
FT_Error error = FT_Err_Invalid_Argument;
FT_Bool ic = 0;
if ( face )
{
FT_Service_CID service;
FT_FACE_FIND_SERVICE( face, service, CID );
if ( service && service->get_is_cid )
error = service->get_is_cid( face, &ic);
}
if ( is_cid )
*is_cid = ic;
return error;
}
FT_EXPORT_DEF( FT_Error )
FT_Get_CID_From_Glyph_Index( FT_Face face,
FT_UInt glyph_index,
FT_UInt *cid )
{
FT_Error error = FT_Err_Invalid_Argument;
FT_UInt c = 0;
if ( face )
{
FT_Service_CID service;
FT_FACE_FIND_SERVICE( face, service, CID );
if ( service && service->get_cid_from_glyph_index )
error = service->get_cid_from_glyph_index( face, glyph_index, &c);
}
if ( cid )
*cid = c;
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftfstype.c */
/* */
/* FreeType utility file to access FSType data (body). */
/* */
/* Copyright 2008, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* svpsinfo.h */
/* */
/* The FreeType PostScript info service (specification). */
/* */
/* Copyright 2003, 2004, 2009, 2011, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVPSINFO_H__
/***************************************************************************/
/* */
/* t1types.h */
/* */
/* Basic Type1/Type2 type definitions and interface (specification */
/* only). */
/* */
/* Copyright 1996-2004, 2006, 2008, 2009, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1TYPES_H__
/***************************************************************************/
/* */
/* pshints.h */
/* */
/* Interface to Postscript-specific (Type 1 and Type 2) hints */
/* recorders (specification only). These are used to support native */
/* T1/T2 hints in the `type1', `cid', and `cff' font drivers. */
/* */
/* Copyright 2001-2003, 2005-2007, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSHINTS_H__
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** INTERNAL REPRESENTATION OF GLOBALS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct PSH_GlobalsRec_* PSH_Globals;
typedef FT_Error
(*PSH_Globals_NewFunc)( FT_Memory memory,
T1_Private* private_dict,
PSH_Globals* aglobals );
typedef FT_Error
(*PSH_Globals_SetScaleFunc)( PSH_Globals globals,
FT_Fixed x_scale,
FT_Fixed y_scale,
FT_Fixed x_delta,
FT_Fixed y_delta );
typedef void
(*PSH_Globals_DestroyFunc)( PSH_Globals globals );
typedef struct PSH_Globals_FuncsRec_
{
PSH_Globals_NewFunc create;
PSH_Globals_SetScaleFunc set_scale;
PSH_Globals_DestroyFunc destroy;
} PSH_Globals_FuncsRec, *PSH_Globals_Funcs;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PUBLIC TYPE 1 HINTS RECORDER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************
*
* @type:
* T1_Hints
*
* @description:
* This is a handle to an opaque structure used to record glyph hints
* from a Type 1 character glyph character string.
*
* The methods used to operate on this object are defined by the
* @T1_Hints_FuncsRec structure. Recording glyph hints is normally
* achieved through the following scheme:
*
* - Open a new hint recording session by calling the `open' method.
* This rewinds the recorder and prepare it for new input.
*
* - For each hint found in the glyph charstring, call the corresponding
* method (`stem', `stem3', or `reset'). Note that these functions do
* not return an error code.
*
* - Close the recording session by calling the `close' method. It
* returns an error code if the hints were invalid or something
* strange happened (e.g., memory shortage).
*
* The hints accumulated in the object can later be used by the
* PostScript hinter.
*
*/
typedef struct T1_HintsRec_* T1_Hints;
/*************************************************************************
*
* @type:
* T1_Hints_Funcs
*
* @description:
* A pointer to the @T1_Hints_FuncsRec structure that defines the API of
* a given @T1_Hints object.
*
*/
typedef const struct T1_Hints_FuncsRec_* T1_Hints_Funcs;
/*************************************************************************
*
* @functype:
* T1_Hints_OpenFunc
*
* @description:
* A method of the @T1_Hints class used to prepare it for a new Type 1
* hints recording session.
*
* @input:
* hints ::
* A handle to the Type 1 hints recorder.
*
* @note:
* You should always call the @T1_Hints_CloseFunc method in order to
* close an opened recording session.
*
*/
typedef void
(*T1_Hints_OpenFunc)( T1_Hints hints );
/*************************************************************************
*
* @functype:
* T1_Hints_SetStemFunc
*
* @description:
* A method of the @T1_Hints class used to record a new horizontal or
* vertical stem. This corresponds to the Type 1 `hstem' and `vstem'
* operators.
*
* @input:
* hints ::
* A handle to the Type 1 hints recorder.
*
* dimension ::
* 0 for horizontal stems (hstem), 1 for vertical ones (vstem).
*
* coords ::
* Array of 2 coordinates in 16.16 format, used as (position,length)
* stem descriptor.
*
* @note:
* Use vertical coordinates (y) for horizontal stems (dim=0). Use
* horizontal coordinates (x) for vertical stems (dim=1).
*
* `coords[0]' is the absolute stem position (lowest coordinate);
* `coords[1]' is the length.
*
* The length can be negative, in which case it must be either -20 or
* -21. It is interpreted as a `ghost' stem, according to the Type 1
* specification.
*
* If the length is -21 (corresponding to a bottom ghost stem), then
* the real stem position is `coords[0]+coords[1]'.
*
*/
typedef void
(*T1_Hints_SetStemFunc)( T1_Hints hints,
FT_UInt dimension,
FT_Fixed* coords );
/*************************************************************************
*
* @functype:
* T1_Hints_SetStem3Func
*
* @description:
* A method of the @T1_Hints class used to record three
* counter-controlled horizontal or vertical stems at once.
*
* @input:
* hints ::
* A handle to the Type 1 hints recorder.
*
* dimension ::
* 0 for horizontal stems, 1 for vertical ones.
*
* coords ::
* An array of 6 values in 16.16 format, holding 3 (position,length)
* pairs for the counter-controlled stems.
*
* @note:
* Use vertical coordinates (y) for horizontal stems (dim=0). Use
* horizontal coordinates (x) for vertical stems (dim=1).
*
* The lengths cannot be negative (ghost stems are never
* counter-controlled).
*
*/
typedef void
(*T1_Hints_SetStem3Func)( T1_Hints hints,
FT_UInt dimension,
FT_Fixed* coords );
/*************************************************************************
*
* @functype:
* T1_Hints_ResetFunc
*
* @description:
* A method of the @T1_Hints class used to reset the stems hints in a
* recording session.
*
* @input:
* hints ::
* A handle to the Type 1 hints recorder.
*
* end_point ::
* The index of the last point in the input glyph in which the
* previously defined hints apply.
*
*/
typedef void
(*T1_Hints_ResetFunc)( T1_Hints hints,
FT_UInt end_point );
/*************************************************************************
*
* @functype:
* T1_Hints_CloseFunc
*
* @description:
* A method of the @T1_Hints class used to close a hint recording
* session.
*
* @input:
* hints ::
* A handle to the Type 1 hints recorder.
*
* end_point ::
* The index of the last point in the input glyph.
*
* @return:
* FreeType error code. 0 means success.
*
* @note:
* The error code is set to indicate that an error occurred during the
* recording session.
*
*/
typedef FT_Error
(*T1_Hints_CloseFunc)( T1_Hints hints,
FT_UInt end_point );
/*************************************************************************
*
* @functype:
* T1_Hints_ApplyFunc
*
* @description:
* A method of the @T1_Hints class used to apply hints to the
* corresponding glyph outline. Must be called once all hints have been
* recorded.
*
* @input:
* hints ::
* A handle to the Type 1 hints recorder.
*
* outline ::
* A pointer to the target outline descriptor.
*
* globals ::
* The hinter globals for this font.
*
* hint_mode ::
* Hinting information.
*
* @return:
* FreeType error code. 0 means success.
*
* @note:
* On input, all points within the outline are in font coordinates. On
* output, they are in 1/64th of pixels.
*
* The scaling transformation is taken from the `globals' object which
* must correspond to the same font as the glyph.
*
*/
typedef FT_Error
(*T1_Hints_ApplyFunc)( T1_Hints hints,
FT_Outline* outline,
PSH_Globals globals,
FT_Render_Mode hint_mode );
/*************************************************************************
*
* @struct:
* T1_Hints_FuncsRec
*
* @description:
* The structure used to provide the API to @T1_Hints objects.
*
* @fields:
* hints ::
* A handle to the T1 Hints recorder.
*
* open ::
* The function to open a recording session.
*
* close ::
* The function to close a recording session.
*
* stem ::
* The function to set a simple stem.
*
* stem3 ::
* The function to set counter-controlled stems.
*
* reset ::
* The function to reset stem hints.
*
* apply ::
* The function to apply the hints to the corresponding glyph outline.
*
*/
typedef struct T1_Hints_FuncsRec_
{
T1_Hints hints;
T1_Hints_OpenFunc open;
T1_Hints_CloseFunc close;
T1_Hints_SetStemFunc stem;
T1_Hints_SetStem3Func stem3;
T1_Hints_ResetFunc reset;
T1_Hints_ApplyFunc apply;
} T1_Hints_FuncsRec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PUBLIC TYPE 2 HINTS RECORDER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************
*
* @type:
* T2_Hints
*
* @description:
* This is a handle to an opaque structure used to record glyph hints
* from a Type 2 character glyph character string.
*
* The methods used to operate on this object are defined by the
* @T2_Hints_FuncsRec structure. Recording glyph hints is normally
* achieved through the following scheme:
*
* - Open a new hint recording session by calling the `open' method.
* This rewinds the recorder and prepare it for new input.
*
* - For each hint found in the glyph charstring, call the corresponding
* method (`stems', `hintmask', `counters'). Note that these
* functions do not return an error code.
*
* - Close the recording session by calling the `close' method. It
* returns an error code if the hints were invalid or something
* strange happened (e.g., memory shortage).
*
* The hints accumulated in the object can later be used by the
* Postscript hinter.
*
*/
typedef struct T2_HintsRec_* T2_Hints;
/*************************************************************************
*
* @type:
* T2_Hints_Funcs
*
* @description:
* A pointer to the @T2_Hints_FuncsRec structure that defines the API of
* a given @T2_Hints object.
*
*/
typedef const struct T2_Hints_FuncsRec_* T2_Hints_Funcs;
/*************************************************************************
*
* @functype:
* T2_Hints_OpenFunc
*
* @description:
* A method of the @T2_Hints class used to prepare it for a new Type 2
* hints recording session.
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* @note:
* You should always call the @T2_Hints_CloseFunc method in order to
* close an opened recording session.
*
*/
typedef void
(*T2_Hints_OpenFunc)( T2_Hints hints );
/*************************************************************************
*
* @functype:
* T2_Hints_StemsFunc
*
* @description:
* A method of the @T2_Hints class used to set the table of stems in
* either the vertical or horizontal dimension. Equivalent to the
* `hstem', `vstem', `hstemhm', and `vstemhm' Type 2 operators.
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* dimension ::
* 0 for horizontal stems (hstem), 1 for vertical ones (vstem).
*
* count ::
* The number of stems.
*
* coords ::
* An array of `count' (position,length) pairs in 16.16 format.
*
* @note:
* Use vertical coordinates (y) for horizontal stems (dim=0). Use
* horizontal coordinates (x) for vertical stems (dim=1).
*
* There are `2*count' elements in the `coords' array. Each even
* element is an absolute position in font units, each odd element is a
* length in font units.
*
* A length can be negative, in which case it must be either -20 or
* -21. It is interpreted as a `ghost' stem, according to the Type 1
* specification.
*
*/
typedef void
(*T2_Hints_StemsFunc)( T2_Hints hints,
FT_UInt dimension,
FT_UInt count,
FT_Fixed* coordinates );
/*************************************************************************
*
* @functype:
* T2_Hints_MaskFunc
*
* @description:
* A method of the @T2_Hints class used to set a given hintmask (this
* corresponds to the `hintmask' Type 2 operator).
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* end_point ::
* The glyph index of the last point to which the previously defined
* or activated hints apply.
*
* bit_count ::
* The number of bits in the hint mask.
*
* bytes ::
* An array of bytes modelling the hint mask.
*
* @note:
* If the hintmask starts the charstring (before any glyph point
* definition), the value of `end_point' should be 0.
*
* `bit_count' is the number of meaningful bits in the `bytes' array; it
* must be equal to the total number of hints defined so far (i.e.,
* horizontal+verticals).
*
* The `bytes' array can come directly from the Type 2 charstring and
* respects the same format.
*
*/
typedef void
(*T2_Hints_MaskFunc)( T2_Hints hints,
FT_UInt end_point,
FT_UInt bit_count,
const FT_Byte* bytes );
/*************************************************************************
*
* @functype:
* T2_Hints_CounterFunc
*
* @description:
* A method of the @T2_Hints class used to set a given counter mask
* (this corresponds to the `hintmask' Type 2 operator).
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* end_point ::
* A glyph index of the last point to which the previously defined or
* active hints apply.
*
* bit_count ::
* The number of bits in the hint mask.
*
* bytes ::
* An array of bytes modelling the hint mask.
*
* @note:
* If the hintmask starts the charstring (before any glyph point
* definition), the value of `end_point' should be 0.
*
* `bit_count' is the number of meaningful bits in the `bytes' array; it
* must be equal to the total number of hints defined so far (i.e.,
* horizontal+verticals).
*
* The `bytes' array can come directly from the Type 2 charstring and
* respects the same format.
*
*/
typedef void
(*T2_Hints_CounterFunc)( T2_Hints hints,
FT_UInt bit_count,
const FT_Byte* bytes );
/*************************************************************************
*
* @functype:
* T2_Hints_CloseFunc
*
* @description:
* A method of the @T2_Hints class used to close a hint recording
* session.
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* end_point ::
* The index of the last point in the input glyph.
*
* @return:
* FreeType error code. 0 means success.
*
* @note:
* The error code is set to indicate that an error occurred during the
* recording session.
*
*/
typedef FT_Error
(*T2_Hints_CloseFunc)( T2_Hints hints,
FT_UInt end_point );
/*************************************************************************
*
* @functype:
* T2_Hints_ApplyFunc
*
* @description:
* A method of the @T2_Hints class used to apply hints to the
* corresponding glyph outline. Must be called after the `close'
* method.
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* outline ::
* A pointer to the target outline descriptor.
*
* globals ::
* The hinter globals for this font.
*
* hint_mode ::
* Hinting information.
*
* @return:
* FreeType error code. 0 means success.
*
* @note:
* On input, all points within the outline are in font coordinates. On
* output, they are in 1/64th of pixels.
*
* The scaling transformation is taken from the `globals' object which
* must correspond to the same font than the glyph.
*
*/
typedef FT_Error
(*T2_Hints_ApplyFunc)( T2_Hints hints,
FT_Outline* outline,
PSH_Globals globals,
FT_Render_Mode hint_mode );
/*************************************************************************
*
* @struct:
* T2_Hints_FuncsRec
*
* @description:
* The structure used to provide the API to @T2_Hints objects.
*
* @fields:
* hints ::
* A handle to the T2 hints recorder object.
*
* open ::
* The function to open a recording session.
*
* close ::
* The function to close a recording session.
*
* stems ::
* The function to set the dimension's stems table.
*
* hintmask ::
* The function to set hint masks.
*
* counter ::
* The function to set counter masks.
*
* apply ::
* The function to apply the hints on the corresponding glyph outline.
*
*/
typedef struct T2_Hints_FuncsRec_
{
T2_Hints hints;
T2_Hints_OpenFunc open;
T2_Hints_CloseFunc close;
T2_Hints_StemsFunc stems;
T2_Hints_MaskFunc hintmask;
T2_Hints_CounterFunc counter;
T2_Hints_ApplyFunc apply;
} T2_Hints_FuncsRec;
/* */
typedef struct PSHinter_Interface_
{
PSH_Globals_Funcs (*get_globals_funcs)( FT_Module module );
T1_Hints_Funcs (*get_t1_funcs) ( FT_Module module );
T2_Hints_Funcs (*get_t2_funcs) ( FT_Module module );
} PSHinter_Interface;
typedef PSHinter_Interface* PSHinter_Service;
#define FT_DEFINE_PSHINTER_INTERFACE( \
class_, \
get_globals_funcs_, \
get_t1_funcs_, \
get_t2_funcs_ ) \
static const PSHinter_Interface class_ = \
{ \
get_globals_funcs_, \
get_t1_funcs_, \
get_t2_funcs_ \
};
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* svpscmap.h */
/* */
/* The FreeType PostScript charmap service (specification). */
/* */
/* Copyright 2003, 2006, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVPSCMAP_H__
FT_BEGIN_HEADER
#define FT_SERVICE_ID_POSTSCRIPT_CMAPS "postscript-cmaps"
/*
* Adobe glyph name to unicode value.
*/
typedef FT_UInt32
(*PS_Unicode_ValueFunc)( const char* glyph_name );
/*
* Macintosh name id to glyph name. NULL if invalid index.
*/
typedef const char*
(*PS_Macintosh_NameFunc)( FT_UInt name_index );
/*
* Adobe standard string ID to glyph name. NULL if invalid index.
*/
typedef const char*
(*PS_Adobe_Std_StringsFunc)( FT_UInt string_index );
/*
* Simple unicode -> glyph index charmap built from font glyph names
* table.
*/
typedef struct PS_UniMap_
{
/* bit 31 set: is glyph variant */
FT_UInt32 unicode;
FT_UInt glyph_index;
} PS_UniMap;
typedef struct PS_UnicodesRec_* PS_Unicodes;
typedef struct PS_UnicodesRec_
{
FT_CMapRec cmap;
FT_UInt num_maps;
PS_UniMap* maps;
} PS_UnicodesRec;
/*
* A function which returns a glyph name for a given index. Returns
* NULL if invalid index.
*/
typedef const char*
(*PS_GetGlyphNameFunc)( FT_Pointer data,
FT_UInt string_index );
/*
* A function used to release the glyph name returned by
* PS_GetGlyphNameFunc, when needed
*/
typedef void
(*PS_FreeGlyphNameFunc)( FT_Pointer data,
const char* name );
typedef FT_Error
(*PS_Unicodes_InitFunc)( FT_Memory memory,
PS_Unicodes unicodes,
FT_UInt num_glyphs,
PS_GetGlyphNameFunc get_glyph_name,
PS_FreeGlyphNameFunc free_glyph_name,
FT_Pointer glyph_data );
typedef FT_UInt
(*PS_Unicodes_CharIndexFunc)( PS_Unicodes unicodes,
FT_UInt32 unicode );
typedef FT_UInt32
(*PS_Unicodes_CharNextFunc)( PS_Unicodes unicodes,
FT_UInt32 *unicode );
FT_DEFINE_SERVICE( PsCMaps )
{
PS_Unicode_ValueFunc unicode_value;
PS_Unicodes_InitFunc unicodes_init;
PS_Unicodes_CharIndexFunc unicodes_char_index;
PS_Unicodes_CharNextFunc unicodes_char_next;
PS_Macintosh_NameFunc macintosh_name;
PS_Adobe_Std_StringsFunc adobe_std_strings;
const unsigned short* adobe_std_encoding;
const unsigned short* adobe_expert_encoding;
};
#define FT_DEFINE_SERVICE_PSCMAPSREC( class_, \
unicode_value_, \
unicodes_init_, \
unicodes_char_index_, \
unicodes_char_next_, \
macintosh_name_, \
adobe_std_strings_, \
adobe_std_encoding_, \
adobe_expert_encoding_ ) \
static const FT_Service_PsCMapsRec class_ = \
{ \
unicode_value_, unicodes_init_, \
unicodes_char_index_, unicodes_char_next_, macintosh_name_, \
adobe_std_strings_, adobe_std_encoding_, adobe_expert_encoding_ \
};
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** REQUIRED TYPE1/TYPE2 TABLES DEFINITIONS ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Struct> */
/* T1_EncodingRec */
/* */
/* <Description> */
/* A structure modeling a custom encoding. */
/* */
/* <Fields> */
/* num_chars :: The number of character codes in the encoding. */
/* Usually 256. */
/* */
/* code_first :: The lowest valid character code in the encoding. */
/* */
/* code_last :: The highest valid character code in the encoding */
/* + 1. When equal to code_first there are no valid */
/* character codes. */
/* */
/* char_index :: An array of corresponding glyph indices. */
/* */
/* char_name :: An array of corresponding glyph names. */
/* */
typedef struct T1_EncodingRecRec_
{
FT_Int num_chars;
FT_Int code_first;
FT_Int code_last;
FT_UShort* char_index;
FT_String** char_name;
} T1_EncodingRec, *T1_Encoding;
/* used to hold extra data of PS_FontInfoRec that
* cannot be stored in the publicly defined structure.
*
* Note these can't be blended with multiple-masters.
*/
typedef struct PS_FontExtraRec_
{
FT_UShort fs_type;
} PS_FontExtraRec;
typedef struct T1_FontRec_
{
/* font info dictionary */
PS_FontInfoRec font_info;
/* font info extra fields */
PS_FontExtraRec font_extra;
/* private dictionary */
PS_PrivateRec private_dict;
/* top-level dictionary */
FT_String* font_name;
T1_EncodingType encoding_type;
T1_EncodingRec encoding;
FT_Byte* subrs_block;
FT_Byte* charstrings_block;
FT_Byte* glyph_names_block;
FT_Int num_subrs;
FT_Byte** subrs;
FT_PtrDist* subrs_len;
FT_Int num_glyphs;
/* array of glyph names */
FT_String** glyph_names;
/* array of glyph charstrings */
FT_Byte** charstrings;
FT_PtrDist* charstrings_len;
FT_Byte paint_type;
FT_Byte font_type;
FT_Matrix font_matrix;
FT_Vector font_offset;
FT_BBox font_bbox;
FT_Long font_id;
FT_Fixed stroke_width;
} T1_FontRec, *T1_Font;
typedef struct CID_SubrsRec_
{
FT_UInt num_subrs;
FT_Byte** code;
} CID_SubrsRec, *CID_Subrs;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** AFM FONT INFORMATION STRUCTURES ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
typedef struct AFM_TrackKernRec_
{
FT_Int degree;
FT_Fixed min_ptsize;
FT_Fixed min_kern;
FT_Fixed max_ptsize;
FT_Fixed max_kern;
} AFM_TrackKernRec, *AFM_TrackKern;
typedef struct AFM_KernPairRec_
{
FT_Int index1;
FT_Int index2;
FT_Int x;
FT_Int y;
} AFM_KernPairRec, *AFM_KernPair;
typedef struct AFM_FontInfoRec_
{
FT_Bool IsCIDFont;
FT_BBox FontBBox;
FT_Fixed Ascender;
FT_Fixed Descender;
/* free if non-NULL */
AFM_TrackKern TrackKerns;
FT_Int NumTrackKern;
/* free if non-NULL */
AFM_KernPair KernPairs;
FT_Int NumKernPair;
} AFM_FontInfoRec, *AFM_FontInfo;
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** ***/
/*** ORIGINAL T1_FACE CLASS DEFINITION ***/
/*** ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
typedef struct T1_FaceRec_* T1_Face;
typedef struct CID_FaceRec_* CID_Face;
typedef struct T1_FaceRec_
{
FT_FaceRec root;
T1_FontRec type1;
const void* psnames;
const void* psaux;
const void* afm_data;
FT_CharMapRec charmaprecs[2];
FT_CharMap charmaps[2];
/* support for Multiple Masters fonts */
PS_Blend blend;
/* undocumented, optional: indices of subroutines that express */
/* the NormalizeDesignVector and the ConvertDesignVector procedure, */
/* respectively, as Type 2 charstrings; -1 if keywords not present */
FT_Int ndv_idx;
FT_Int cdv_idx;
/* undocumented, optional: has the same meaning as len_buildchar */
/* for Type 2 fonts; manipulated by othersubrs 19, 24, and 25 */
FT_UInt len_buildchar;
FT_Long* buildchar;
/* since version 2.1 - interface to PostScript hinter */
const void* pshinter;
} T1_FaceRec;
typedef struct CID_FaceRec_
{
FT_FaceRec root;
void* psnames;
void* psaux;
CID_FaceInfoRec cid;
PS_FontExtraRec font_extra;
#if 0
void* afm_data;
#endif
CID_Subrs subrs;
/* since version 2.1 - interface to PostScript hinter */
void* pshinter;
/* since version 2.1.8, but was originally positioned after `afm_data' */
/* used if hex data has been converted */
FT_Byte* binary_data;
FT_Stream cid_stream;
} CID_FaceRec;
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
#define FT_SERVICE_ID_POSTSCRIPT_INFO "postscript-info"
typedef FT_Error
(*PS_GetFontInfoFunc)( FT_Face face,
PS_FontInfoRec* afont_info );
typedef FT_Error
(*PS_GetFontExtraFunc)( FT_Face face,
PS_FontExtraRec* afont_extra );
typedef FT_Int
(*PS_HasGlyphNamesFunc)( FT_Face face );
typedef FT_Error
(*PS_GetFontPrivateFunc)( FT_Face face,
PS_PrivateRec* afont_private );
typedef FT_Long
(*PS_GetFontValueFunc)( FT_Face face,
PS_Dict_Keys key,
FT_UInt idx,
void *value,
FT_Long value_len );
FT_DEFINE_SERVICE( PsInfo )
{
PS_GetFontInfoFunc ps_get_font_info;
PS_GetFontExtraFunc ps_get_font_extra;
PS_HasGlyphNamesFunc ps_has_glyph_names;
PS_GetFontPrivateFunc ps_get_font_private;
PS_GetFontValueFunc ps_get_font_value;
};
#define FT_DEFINE_SERVICE_PSINFOREC( class_, \
get_font_info_, \
ps_get_font_extra_, \
has_glyph_names_, \
get_font_private_, \
get_font_value_ ) \
static const FT_Service_PsInfoRec class_ = \
{ \
get_font_info_, ps_get_font_extra_, has_glyph_names_, \
get_font_private_, get_font_value_ \
};
/* */
FT_END_HEADER
/* END */
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_UShort )
FT_Get_FSType_Flags( FT_Face face )
{
TT_OS2* os2;
/* first, try to get the fs_type directly from the font */
if ( face )
{
FT_Service_PsInfo service = NULL;
FT_FACE_FIND_SERVICE( face, service, POSTSCRIPT_INFO );
if ( service && service->ps_get_font_extra )
{
PS_FontExtraRec extra;
if ( !service->ps_get_font_extra( face, &extra ) &&
extra.fs_type != 0 )
return extra.fs_type;
}
}
/* look at FSType before fsType for Type42 */
if ( ( os2 = (TT_OS2*)FT_Get_Sfnt_Table( face, ft_sfnt_os2 ) ) != NULL &&
os2->version != 0xFFFFU )
return os2->fsType;
return 0;
}
/* END */
/***************************************************************************/
/* */
/* fttype1.c */
/* */
/* FreeType utility file for PS names support (body). */
/* */
/* Copyright 2002-2004, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* documentation is in t1tables.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_PS_Font_Info( FT_Face face,
PS_FontInfoRec* afont_info )
{
FT_Error error = FT_Err_Invalid_Argument;
if ( face )
{
FT_Service_PsInfo service = NULL;
FT_FACE_FIND_SERVICE( face, service, POSTSCRIPT_INFO );
if ( service && service->ps_get_font_info )
error = service->ps_get_font_info( face, afont_info );
}
return error;
}
/* documentation is in t1tables.h */
FT_EXPORT_DEF( FT_Int )
FT_Has_PS_Glyph_Names( FT_Face face )
{
FT_Int result = 0;
FT_Service_PsInfo service = NULL;
if ( face )
{
FT_FACE_FIND_SERVICE( face, service, POSTSCRIPT_INFO );
if ( service && service->ps_has_glyph_names )
result = service->ps_has_glyph_names( face );
}
return result;
}
/* documentation is in t1tables.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_PS_Font_Private( FT_Face face,
PS_PrivateRec* afont_private )
{
FT_Error error = FT_Err_Invalid_Argument;
if ( face )
{
FT_Service_PsInfo service = NULL;
FT_FACE_FIND_SERVICE( face, service, POSTSCRIPT_INFO );
if ( service && service->ps_get_font_private )
error = service->ps_get_font_private( face, afont_private );
}
return error;
}
/* documentation is in t1tables.h */
FT_EXPORT_DEF( FT_Long )
FT_Get_PS_Font_Value( FT_Face face,
PS_Dict_Keys key,
FT_UInt idx,
void *value,
FT_Long value_len )
{
FT_Int result = 0;
FT_Service_PsInfo service = NULL;
if ( face )
{
FT_FACE_FIND_SERVICE( face, service, POSTSCRIPT_INFO );
if ( service && service->ps_get_font_value )
result = service->ps_get_font_value( face, key, idx,
value, value_len );
}
return result;
}
/* END */
/***************************************************************************/
/* */
/* ftgasp.c */
/* */
/* Access of TrueType's `gasp' table (body). */
/* */
/* Copyright 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftgasp.h */
/* */
/* Access of TrueType's `gasp' table (specification). */
/* */
/* Copyright 2007, 2008, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef _FT_GASP_H_
#define _FT_GASP_H_
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
/***************************************************************************
*
* @section:
* gasp_table
*
* @title:
* Gasp Table
*
* @abstract:
* Retrieving TrueType `gasp' table entries.
*
* @description:
* The function @FT_Get_Gasp can be used to query a TrueType or OpenType
* font for specific entries in its `gasp' table, if any. This is
* mainly useful when implementing native TrueType hinting with the
* bytecode interpreter to duplicate the Windows text rendering results.
*/
/*************************************************************************
*
* @enum:
* FT_GASP_XXX
*
* @description:
* A list of values and/or bit-flags returned by the @FT_Get_Gasp
* function.
*
* @values:
* FT_GASP_NO_TABLE ::
* This special value means that there is no GASP table in this face.
* It is up to the client to decide what to do.
*
* FT_GASP_DO_GRIDFIT ::
* Grid-fitting and hinting should be performed at the specified ppem.
* This *really* means TrueType bytecode interpretation. If this bit
* is not set, no hinting gets applied.
*
* FT_GASP_DO_GRAY ::
* Anti-aliased rendering should be performed at the specified ppem.
* If not set, do monochrome rendering.
*
* FT_GASP_SYMMETRIC_SMOOTHING ::
* If set, smoothing along multiple axes must be used with ClearType.
*
* FT_GASP_SYMMETRIC_GRIDFIT ::
* Grid-fitting must be used with ClearType's symmetric smoothing.
*
* @note:
* The bit-flags `FT_GASP_DO_GRIDFIT' and `FT_GASP_DO_GRAY' are to be
* used for standard font rasterization only. Independently of that,
* `FT_GASP_SYMMETRIC_SMOOTHING' and `FT_GASP_SYMMETRIC_GRIDFIT' are to
* be used if ClearType is enabled (and `FT_GASP_DO_GRIDFIT' and
* `FT_GASP_DO_GRAY' are consequently ignored).
*
* `ClearType' is Microsoft's implementation of LCD rendering, partly
* protected by patents.
*
* @since:
* 2.3.0
*/
#define FT_GASP_NO_TABLE -1
#define FT_GASP_DO_GRIDFIT 0x01
#define FT_GASP_DO_GRAY 0x02
#define FT_GASP_SYMMETRIC_SMOOTHING 0x08
#define FT_GASP_SYMMETRIC_GRIDFIT 0x10
/*************************************************************************
*
* @func:
* FT_Get_Gasp
*
* @description:
* Read the `gasp' table from a TrueType or OpenType font file and
* return the entry corresponding to a given character pixel size.
*
* @input:
* face :: The source face handle.
* ppem :: The vertical character pixel size.
*
* @return:
* Bit flags (see @FT_GASP_XXX), or @FT_GASP_NO_TABLE if there is no
* `gasp' table in the face.
*
* @since:
* 2.3.0
*/
FT_EXPORT( FT_Int )
FT_Get_Gasp( FT_Face face,
FT_UInt ppem );
/* */
/* _FT_GASP_H_ */
#endif
/* END */
FT_EXPORT_DEF( FT_Int )
FT_Get_Gasp( FT_Face face,
FT_UInt ppem )
{
FT_Int result = FT_GASP_NO_TABLE;
if ( face && FT_IS_SFNT( face ) )
{
TT_Face ttface = (TT_Face)face;
if ( ttface->gasp.numRanges > 0 )
{
TT_GaspRange range = ttface->gasp.gaspRanges;
TT_GaspRange range_end = range + ttface->gasp.numRanges;
while ( ppem > range->maxPPEM )
{
range++;
if ( range >= range_end )
goto Exit;
}
result = range->gaspFlag;
/* ensure that we don't have spurious bits */
if ( ttface->gasp.version == 0 )
result &= 3;
}
}
Exit:
return result;
}
/* END */
/***************************************************************************/
/* */
/* ftgxval.c */
/* */
/* FreeType API for validating TrueTyepGX/AAT tables (body). */
/* */
/* Copyright 2004, 2005, 2006, 2010 by */
/* Masatake YAMATO, Redhat K.K, */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* gxvalid is derived from both gxlayout module and otvalid module. */
/* Development of gxlayout is supported by the Information-technology */
/* Promotion Agency(IPA), Japan. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* svgxval.h */
/* */
/* FreeType API for validating TrueTypeGX/AAT tables (specification). */
/* */
/* Copyright 2004, 2005 by */
/* Masatake YAMATO, Red Hat K.K., */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* gxvalid is derived from both gxlayout module and otvalid module. */
/* Development of gxlayout is supported by the Information-technology */
/* Promotion Agency(IPA), Japan. */
/* */
/***************************************************************************/
#define __SVGXVAL_H__
/***************************************************************************/
/* */
/* ftgxval.h */
/* */
/* FreeType API for validating TrueTypeGX/AAT tables (specification). */
/* */
/* Copyright 2004, 2005, 2006 by */
/* Masatake YAMATO, Redhat K.K, */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* gxvalid is derived from both gxlayout module and otvalid module. */
/* Development of gxlayout is supported by the Information-technology */
/* Promotion Agency(IPA), Japan. */
/* */
/***************************************************************************/
#define __FTGXVAL_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* gx_validation */
/* */
/* <Title> */
/* TrueTypeGX/AAT Validation */
/* */
/* <Abstract> */
/* An API to validate TrueTypeGX/AAT tables. */
/* */
/* <Description> */
/* This section contains the declaration of functions to validate */
/* some TrueTypeGX tables (feat, mort, morx, bsln, just, kern, opbd, */
/* trak, prop, lcar). */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* */
/* Warning: Use FT_VALIDATE_XXX to validate a table. */
/* Following definitions are for gxvalid developers. */
/* */
/* */
/*************************************************************************/
#define FT_VALIDATE_feat_INDEX 0
#define FT_VALIDATE_mort_INDEX 1
#define FT_VALIDATE_morx_INDEX 2
#define FT_VALIDATE_bsln_INDEX 3
#define FT_VALIDATE_just_INDEX 4
#define FT_VALIDATE_kern_INDEX 5
#define FT_VALIDATE_opbd_INDEX 6
#define FT_VALIDATE_trak_INDEX 7
#define FT_VALIDATE_prop_INDEX 8
#define FT_VALIDATE_lcar_INDEX 9
#define FT_VALIDATE_GX_LAST_INDEX FT_VALIDATE_lcar_INDEX
/*************************************************************************
*
* @macro:
* FT_VALIDATE_GX_LENGTH
*
* @description:
* The number of tables checked in this module. Use it as a parameter
* for the `table-length' argument of function @FT_TrueTypeGX_Validate.
*/
#define FT_VALIDATE_GX_LENGTH (FT_VALIDATE_GX_LAST_INDEX + 1)
/* */
/* Up to 0x1000 is used by otvalid.
Ox2xxx is reserved for feature OT extension. */
#define FT_VALIDATE_GX_START 0x4000
#define FT_VALIDATE_GX_BITFIELD( tag ) \
( FT_VALIDATE_GX_START << FT_VALIDATE_##tag##_INDEX )
/**********************************************************************
*
* @enum:
* FT_VALIDATE_GXXXX
*
* @description:
* A list of bit-field constants used with @FT_TrueTypeGX_Validate to
* indicate which TrueTypeGX/AAT Type tables should be validated.
*
* @values:
* FT_VALIDATE_feat ::
* Validate `feat' table.
*
* FT_VALIDATE_mort ::
* Validate `mort' table.
*
* FT_VALIDATE_morx ::
* Validate `morx' table.
*
* FT_VALIDATE_bsln ::
* Validate `bsln' table.
*
* FT_VALIDATE_just ::
* Validate `just' table.
*
* FT_VALIDATE_kern ::
* Validate `kern' table.
*
* FT_VALIDATE_opbd ::
* Validate `opbd' table.
*
* FT_VALIDATE_trak ::
* Validate `trak' table.
*
* FT_VALIDATE_prop ::
* Validate `prop' table.
*
* FT_VALIDATE_lcar ::
* Validate `lcar' table.
*
* FT_VALIDATE_GX ::
* Validate all TrueTypeGX tables (feat, mort, morx, bsln, just, kern,
* opbd, trak, prop and lcar).
*
*/
#define FT_VALIDATE_feat FT_VALIDATE_GX_BITFIELD( feat )
#define FT_VALIDATE_mort FT_VALIDATE_GX_BITFIELD( mort )
#define FT_VALIDATE_morx FT_VALIDATE_GX_BITFIELD( morx )
#define FT_VALIDATE_bsln FT_VALIDATE_GX_BITFIELD( bsln )
#define FT_VALIDATE_just FT_VALIDATE_GX_BITFIELD( just )
#define FT_VALIDATE_kern FT_VALIDATE_GX_BITFIELD( kern )
#define FT_VALIDATE_opbd FT_VALIDATE_GX_BITFIELD( opbd )
#define FT_VALIDATE_trak FT_VALIDATE_GX_BITFIELD( trak )
#define FT_VALIDATE_prop FT_VALIDATE_GX_BITFIELD( prop )
#define FT_VALIDATE_lcar FT_VALIDATE_GX_BITFIELD( lcar )
#define FT_VALIDATE_GX ( FT_VALIDATE_feat | \
FT_VALIDATE_mort | \
FT_VALIDATE_morx | \
FT_VALIDATE_bsln | \
FT_VALIDATE_just | \
FT_VALIDATE_kern | \
FT_VALIDATE_opbd | \
FT_VALIDATE_trak | \
FT_VALIDATE_prop | \
FT_VALIDATE_lcar )
/* */
/**********************************************************************
*
* @function:
* FT_TrueTypeGX_Validate
*
* @description:
* Validate various TrueTypeGX tables to assure that all offsets and
* indices are valid. The idea is that a higher-level library which
* actually does the text layout can access those tables without
* error checking (which can be quite time consuming).
*
* @input:
* face ::
* A handle to the input face.
*
* validation_flags ::
* A bit field which specifies the tables to be validated. See
* @FT_VALIDATE_GXXXX for possible values.
*
* table_length ::
* The size of the `tables' array. Normally, @FT_VALIDATE_GX_LENGTH
* should be passed.
*
* @output:
* tables ::
* The array where all validated sfnt tables are stored.
* The array itself must be allocated by a client.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function only works with TrueTypeGX fonts, returning an error
* otherwise.
*
* After use, the application should deallocate the buffers pointed to by
* each `tables' element, by calling @FT_TrueTypeGX_Free. A NULL value
* indicates that the table either doesn't exist in the font, the
* application hasn't asked for validation, or the validator doesn't have
* the ability to validate the sfnt table.
*/
FT_EXPORT( FT_Error )
FT_TrueTypeGX_Validate( FT_Face face,
FT_UInt validation_flags,
FT_Bytes tables[FT_VALIDATE_GX_LENGTH],
FT_UInt table_length );
/* */
/**********************************************************************
*
* @function:
* FT_TrueTypeGX_Free
*
* @description:
* Free the buffer allocated by TrueTypeGX validator.
*
* @input:
* face ::
* A handle to the input face.
*
* table ::
* The pointer to the buffer allocated by
* @FT_TrueTypeGX_Validate.
*
* @note:
* This function must be used to free the buffer allocated by
* @FT_TrueTypeGX_Validate only.
*/
FT_EXPORT( void )
FT_TrueTypeGX_Free( FT_Face face,
FT_Bytes table );
/* */
/**********************************************************************
*
* @enum:
* FT_VALIDATE_CKERNXXX
*
* @description:
* A list of bit-field constants used with @FT_ClassicKern_Validate
* to indicate the classic kern dialect or dialects. If the selected
* type doesn't fit, @FT_ClassicKern_Validate regards the table as
* invalid.
*
* @values:
* FT_VALIDATE_MS ::
* Handle the `kern' table as a classic Microsoft kern table.
*
* FT_VALIDATE_APPLE ::
* Handle the `kern' table as a classic Apple kern table.
*
* FT_VALIDATE_CKERN ::
* Handle the `kern' as either classic Apple or Microsoft kern table.
*/
#define FT_VALIDATE_MS ( FT_VALIDATE_GX_START << 0 )
#define FT_VALIDATE_APPLE ( FT_VALIDATE_GX_START << 1 )
#define FT_VALIDATE_CKERN ( FT_VALIDATE_MS | FT_VALIDATE_APPLE )
/* */
/**********************************************************************
*
* @function:
* FT_ClassicKern_Validate
*
* @description:
* Validate classic (16-bit format) kern table to assure that the offsets
* and indices are valid. The idea is that a higher-level library which
* actually does the text layout can access those tables without error
* checking (which can be quite time consuming).
*
* The `kern' table validator in @FT_TrueTypeGX_Validate deals with both
* the new 32-bit format and the classic 16-bit format, while
* FT_ClassicKern_Validate only supports the classic 16-bit format.
*
* @input:
* face ::
* A handle to the input face.
*
* validation_flags ::
* A bit field which specifies the dialect to be validated. See
* @FT_VALIDATE_CKERNXXX for possible values.
*
* @output:
* ckern_table ::
* A pointer to the kern table.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* After use, the application should deallocate the buffers pointed to by
* `ckern_table', by calling @FT_ClassicKern_Free. A NULL value
* indicates that the table doesn't exist in the font.
*/
FT_EXPORT( FT_Error )
FT_ClassicKern_Validate( FT_Face face,
FT_UInt validation_flags,
FT_Bytes *ckern_table );
/* */
/**********************************************************************
*
* @function:
* FT_ClassicKern_Free
*
* @description:
* Free the buffer allocated by classic Kern validator.
*
* @input:
* face ::
* A handle to the input face.
*
* table ::
* The pointer to the buffer that is allocated by
* @FT_ClassicKern_Validate.
*
* @note:
* This function must be used to free the buffer allocated by
* @FT_ClassicKern_Validate only.
*/
FT_EXPORT( void )
FT_ClassicKern_Free( FT_Face face,
FT_Bytes table );
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
#define FT_SERVICE_ID_GX_VALIDATE "truetypegx-validate"
#define FT_SERVICE_ID_CLASSICKERN_VALIDATE "classickern-validate"
typedef FT_Error
(*gxv_validate_func)( FT_Face face,
FT_UInt gx_flags,
FT_Bytes tables[FT_VALIDATE_GX_LENGTH],
FT_UInt table_length );
typedef FT_Error
(*ckern_validate_func)( FT_Face face,
FT_UInt ckern_flags,
FT_Bytes *ckern_table );
FT_DEFINE_SERVICE( GXvalidate )
{
gxv_validate_func validate;
};
FT_DEFINE_SERVICE( CKERNvalidate )
{
ckern_validate_func validate;
};
/* */
FT_END_HEADER
/* END */
/* documentation is in ftgxval.h */
FT_EXPORT_DEF( FT_Error )
FT_TrueTypeGX_Validate( FT_Face face,
FT_UInt validation_flags,
FT_Bytes tables[FT_VALIDATE_GX_LENGTH],
FT_UInt table_length )
{
FT_Service_GXvalidate service;
FT_Error error;
if ( !face )
{
error = FT_Err_Invalid_Face_Handle;
goto Exit;
}
if ( tables == NULL )
{
error = FT_Err_Invalid_Argument;
goto Exit;
}
FT_FACE_FIND_GLOBAL_SERVICE( face, service, GX_VALIDATE );
if ( service )
error = service->validate( face,
validation_flags,
tables,
table_length );
else
error = FT_Err_Unimplemented_Feature;
Exit:
return error;
}
FT_EXPORT_DEF( void )
FT_TrueTypeGX_Free( FT_Face face,
FT_Bytes table )
{
FT_Memory memory;
if ( !face )
return;
memory = FT_FACE_MEMORY( face );
FT_FREE( table );
}
FT_EXPORT_DEF( FT_Error )
FT_ClassicKern_Validate( FT_Face face,
FT_UInt validation_flags,
FT_Bytes *ckern_table )
{
FT_Service_CKERNvalidate service;
FT_Error error;
if ( !face )
{
error = FT_Err_Invalid_Face_Handle;
goto Exit;
}
if ( ckern_table == NULL )
{
error = FT_Err_Invalid_Argument;
goto Exit;
}
FT_FACE_FIND_GLOBAL_SERVICE( face, service, CLASSICKERN_VALIDATE );
if ( service )
error = service->validate( face,
validation_flags,
ckern_table );
else
error = FT_Err_Unimplemented_Feature;
Exit:
return error;
}
FT_EXPORT_DEF( void )
FT_ClassicKern_Free( FT_Face face,
FT_Bytes table )
{
FT_Memory memory;
if ( !face )
return;
memory = FT_FACE_MEMORY( face );
FT_FREE( table );
}
/* END */
/***************************************************************************/
/* */
/* ftlcdfil.c */
/* */
/* FreeType API for color filtering of subpixel bitmap glyphs (body). */
/* */
/* Copyright 2006, 2008, 2009, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* define USE_LEGACY to implement the legacy filter */
#define USE_LEGACY
/* FIR filter used by the default and light filters */
static void
_ft_lcd_filter_fir( FT_Bitmap* bitmap,
FT_Render_Mode mode,
FT_Library library )
{
FT_Byte* weights = library->lcd_weights;
FT_UInt width = (FT_UInt)bitmap->width;
FT_UInt height = (FT_UInt)bitmap->rows;
/* horizontal in-place FIR filter */
if ( mode == FT_RENDER_MODE_LCD && width >= 4 )
{
FT_Byte* line = bitmap->buffer;
for ( ; height > 0; height--, line += bitmap->pitch )
{
FT_UInt fir[5];
FT_UInt val1, xx;
val1 = line[0];
fir[0] = weights[2] * val1;
fir[1] = weights[3] * val1;
fir[2] = weights[4] * val1;
fir[3] = 0;
fir[4] = 0;
val1 = line[1];
fir[0] += weights[1] * val1;
fir[1] += weights[2] * val1;
fir[2] += weights[3] * val1;
fir[3] += weights[4] * val1;
for ( xx = 2; xx < width; xx++ )
{
FT_UInt val, pix;
val = line[xx];
pix = fir[0] + weights[0] * val;
fir[0] = fir[1] + weights[1] * val;
fir[1] = fir[2] + weights[2] * val;
fir[2] = fir[3] + weights[3] * val;
fir[3] = weights[4] * val;
pix >>= 8;
pix |= -( pix >> 8 );
line[xx - 2] = (FT_Byte)pix;
}
{
FT_UInt pix;
pix = fir[0] >> 8;
pix |= -( pix >> 8 );
line[xx - 2] = (FT_Byte)pix;
pix = fir[1] >> 8;
pix |= -( pix >> 8 );
line[xx - 1] = (FT_Byte)pix;
}
}
}
/* vertical in-place FIR filter */
else if ( mode == FT_RENDER_MODE_LCD_V && height >= 4 )
{
FT_Byte* column = bitmap->buffer;
FT_Int pitch = bitmap->pitch;
for ( ; width > 0; width--, column++ )
{
FT_Byte* col = column;
FT_UInt fir[5];
FT_UInt val1, yy;
val1 = col[0];
fir[0] = weights[2] * val1;
fir[1] = weights[3] * val1;
fir[2] = weights[4] * val1;
fir[3] = 0;
fir[4] = 0;
col += pitch;
val1 = col[0];
fir[0] += weights[1] * val1;
fir[1] += weights[2] * val1;
fir[2] += weights[3] * val1;
fir[3] += weights[4] * val1;
col += pitch;
for ( yy = 2; yy < height; yy++ )
{
FT_UInt val, pix;
val = col[0];
pix = fir[0] + weights[0] * val;
fir[0] = fir[1] + weights[1] * val;
fir[1] = fir[2] + weights[2] * val;
fir[2] = fir[3] + weights[3] * val;
fir[3] = weights[4] * val;
pix >>= 8;
pix |= -( pix >> 8 );
col[-2 * pitch] = (FT_Byte)pix;
col += pitch;
}
{
FT_UInt pix;
pix = fir[0] >> 8;
pix |= -( pix >> 8 );
col[-2 * pitch] = (FT_Byte)pix;
pix = fir[1] >> 8;
pix |= -( pix >> 8 );
col[-pitch] = (FT_Byte)pix;
}
}
}
}
#ifdef USE_LEGACY
/* intra-pixel filter used by the legacy filter */
static void
_ft_lcd_filter_legacy( FT_Bitmap* bitmap,
FT_Render_Mode mode,
FT_Library library )
{
FT_UInt width = (FT_UInt)bitmap->width;
FT_UInt height = (FT_UInt)bitmap->rows;
FT_Int pitch = bitmap->pitch;
static const int filters[3][3] =
{
{ 65538 * 9/13, 65538 * 1/6, 65538 * 1/13 },
{ 65538 * 3/13, 65538 * 4/6, 65538 * 3/13 },
{ 65538 * 1/13, 65538 * 1/6, 65538 * 9/13 }
};
FT_UNUSED( library );
/* horizontal in-place intra-pixel filter */
if ( mode == FT_RENDER_MODE_LCD && width >= 3 )
{
FT_Byte* line = bitmap->buffer;
for ( ; height > 0; height--, line += pitch )
{
FT_UInt xx;
for ( xx = 0; xx < width; xx += 3 )
{
FT_UInt r = 0;
FT_UInt g = 0;
FT_UInt b = 0;
FT_UInt p;
p = line[xx];
r += filters[0][0] * p;
g += filters[0][1] * p;
b += filters[0][2] * p;
p = line[xx + 1];
r += filters[1][0] * p;
g += filters[1][1] * p;
b += filters[1][2] * p;
p = line[xx + 2];
r += filters[2][0] * p;
g += filters[2][1] * p;
b += filters[2][2] * p;
line[xx] = (FT_Byte)( r / 65536 );
line[xx + 1] = (FT_Byte)( g / 65536 );
line[xx + 2] = (FT_Byte)( b / 65536 );
}
}
}
else if ( mode == FT_RENDER_MODE_LCD_V && height >= 3 )
{
FT_Byte* column = bitmap->buffer;
for ( ; width > 0; width--, column++ )
{
FT_Byte* col = column;
FT_Byte* col_end = col + height * pitch;
for ( ; col < col_end; col += 3 * pitch )
{
FT_UInt r = 0;
FT_UInt g = 0;
FT_UInt b = 0;
FT_UInt p;
p = col[0];
r += filters[0][0] * p;
g += filters[0][1] * p;
b += filters[0][2] * p;
p = col[pitch];
r += filters[1][0] * p;
g += filters[1][1] * p;
b += filters[1][2] * p;
p = col[pitch * 2];
r += filters[2][0] * p;
g += filters[2][1] * p;
b += filters[2][2] * p;
col[0] = (FT_Byte)( r / 65536 );
col[pitch] = (FT_Byte)( g / 65536 );
col[2 * pitch] = (FT_Byte)( b / 65536 );
}
}
}
}
/* USE_LEGACY */
#endif
FT_EXPORT_DEF( FT_Error )
FT_Library_SetLcdFilterWeights( FT_Library library,
unsigned char *weights )
{
if ( !library || !weights )
return FT_Err_Invalid_Argument;
ft_memcpy( library->lcd_weights, weights, 5 );
return FT_Err_Ok;
}
FT_EXPORT_DEF( FT_Error )
FT_Library_SetLcdFilter( FT_Library library,
FT_LcdFilter filter )
{
static const FT_Byte light_filter[5] =
{ 0x00, 0x55, 0x56, 0x55, 0x00 };
/* the values here sum up to a value larger than 256, */
/* providing a cheap gamma correction */
static const FT_Byte default_filter[5] =
{ 0x10, 0x40, 0x70, 0x40, 0x10 };
if ( !library )
return FT_Err_Invalid_Argument;
switch ( filter )
{
case FT_LCD_FILTER_NONE:
library->lcd_filter_func = NULL;
library->lcd_extra = 0;
break;
case FT_LCD_FILTER_DEFAULT:
#if defined( FT_FORCE_LEGACY_LCD_FILTER )
library->lcd_filter_func = _ft_lcd_filter_legacy;
library->lcd_extra = 0;
#elif defined( FT_FORCE_LIGHT_LCD_FILTER )
ft_memcpy( library->lcd_weights, light_filter, 5 );
library->lcd_filter_func = _ft_lcd_filter_fir;
library->lcd_extra = 2;
#else
ft_memcpy( library->lcd_weights, default_filter, 5 );
library->lcd_filter_func = _ft_lcd_filter_fir;
library->lcd_extra = 2;
#endif
break;
case FT_LCD_FILTER_LIGHT:
ft_memcpy( library->lcd_weights, light_filter, 5 );
library->lcd_filter_func = _ft_lcd_filter_fir;
library->lcd_extra = 2;
break;
#ifdef USE_LEGACY
case FT_LCD_FILTER_LEGACY:
library->lcd_filter_func = _ft_lcd_filter_legacy;
library->lcd_extra = 0;
break;
#endif
default:
return FT_Err_Invalid_Argument;
}
library->lcd_filter = filter;
return FT_Err_Ok;
}
/* END */
/***************************************************************************/
/* */
/* ftmm.c */
/* */
/* Multiple Master font support (body). */
/* */
/* Copyright 1996-2001, 2003, 2004, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* svmm.h */
/* */
/* The FreeType Multiple Masters and GX var services (specification). */
/* */
/* Copyright 2003, 2004, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVMM_H__
FT_BEGIN_HEADER
/*
* A service used to manage multiple-masters data in a given face.
*
* See the related APIs in `ftmm.h' (FT_MULTIPLE_MASTERS_H).
*
*/
#define FT_SERVICE_ID_MULTI_MASTERS "multi-masters"
typedef FT_Error
(*FT_Get_MM_Func)( FT_Face face,
FT_Multi_Master* master );
typedef FT_Error
(*FT_Get_MM_Var_Func)( FT_Face face,
FT_MM_Var* *master );
typedef FT_Error
(*FT_Set_MM_Design_Func)( FT_Face face,
FT_UInt num_coords,
FT_Long* coords );
typedef FT_Error
(*FT_Set_Var_Design_Func)( FT_Face face,
FT_UInt num_coords,
FT_Fixed* coords );
typedef FT_Error
(*FT_Set_MM_Blend_Func)( FT_Face face,
FT_UInt num_coords,
FT_Long* coords );
FT_DEFINE_SERVICE( MultiMasters )
{
FT_Get_MM_Func get_mm;
FT_Set_MM_Design_Func set_mm_design;
FT_Set_MM_Blend_Func set_mm_blend;
FT_Get_MM_Var_Func get_mm_var;
FT_Set_Var_Design_Func set_var_design;
};
#define FT_DEFINE_SERVICE_MULTIMASTERSREC( class_, \
get_mm_, \
set_mm_design_, \
set_mm_blend_, \
get_mm_var_, \
set_var_design_ ) \
static const FT_Service_MultiMastersRec class_ = \
{ \
get_mm_, set_mm_design_, set_mm_blend_, get_mm_var_, set_var_design_ \
};
/* */
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_mm
static FT_Error
ft_face_get_mm_service( FT_Face face,
FT_Service_MultiMasters *aservice )
{
FT_Error error;
*aservice = NULL;
if ( !face )
return FT_Err_Invalid_Face_Handle;
error = FT_Err_Invalid_Argument;
if ( FT_HAS_MULTIPLE_MASTERS( face ) )
{
FT_FACE_LOOKUP_SERVICE( face,
*aservice,
MULTI_MASTERS );
if ( *aservice )
error = FT_Err_Ok;
}
return error;
}
/* documentation is in ftmm.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_Multi_Master( FT_Face face,
FT_Multi_Master *amaster )
{
FT_Error error;
FT_Service_MultiMasters service;
error = ft_face_get_mm_service( face, &service );
if ( !error )
{
error = FT_Err_Invalid_Argument;
if ( service->get_mm )
error = service->get_mm( face, amaster );
}
return error;
}
/* documentation is in ftmm.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_MM_Var( FT_Face face,
FT_MM_Var* *amaster )
{
FT_Error error;
FT_Service_MultiMasters service;
error = ft_face_get_mm_service( face, &service );
if ( !error )
{
error = FT_Err_Invalid_Argument;
if ( service->get_mm_var )
error = service->get_mm_var( face, amaster );
}
return error;
}
/* documentation is in ftmm.h */
FT_EXPORT_DEF( FT_Error )
FT_Set_MM_Design_Coordinates( FT_Face face,
FT_UInt num_coords,
FT_Long* coords )
{
FT_Error error;
FT_Service_MultiMasters service;
error = ft_face_get_mm_service( face, &service );
if ( !error )
{
error = FT_Err_Invalid_Argument;
if ( service->set_mm_design )
error = service->set_mm_design( face, num_coords, coords );
}
return error;
}
/* documentation is in ftmm.h */
FT_EXPORT_DEF( FT_Error )
FT_Set_Var_Design_Coordinates( FT_Face face,
FT_UInt num_coords,
FT_Fixed* coords )
{
FT_Error error;
FT_Service_MultiMasters service;
error = ft_face_get_mm_service( face, &service );
if ( !error )
{
error = FT_Err_Invalid_Argument;
if ( service->set_var_design )
error = service->set_var_design( face, num_coords, coords );
}
return error;
}
/* documentation is in ftmm.h */
FT_EXPORT_DEF( FT_Error )
FT_Set_MM_Blend_Coordinates( FT_Face face,
FT_UInt num_coords,
FT_Fixed* coords )
{
FT_Error error;
FT_Service_MultiMasters service;
error = ft_face_get_mm_service( face, &service );
if ( !error )
{
error = FT_Err_Invalid_Argument;
if ( service->set_mm_blend )
error = service->set_mm_blend( face, num_coords, coords );
}
return error;
}
/* documentation is in ftmm.h */
/* This is exactly the same as the previous function. It exists for */
/* orthogonality. */
FT_EXPORT_DEF( FT_Error )
FT_Set_Var_Blend_Coordinates( FT_Face face,
FT_UInt num_coords,
FT_Fixed* coords )
{
FT_Error error;
FT_Service_MultiMasters service;
error = ft_face_get_mm_service( face, &service );
if ( !error )
{
error = FT_Err_Invalid_Argument;
if ( service->set_mm_blend )
error = service->set_mm_blend( face, num_coords, coords );
}
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftotval.c */
/* */
/* FreeType API for validating OpenType tables (body). */
/* */
/* Copyright 2004, 2006, 2008, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* svotval.h */
/* */
/* The FreeType OpenType validation service (specification). */
/* */
/* Copyright 2004, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVOTVAL_H__
/***************************************************************************/
/* */
/* ftotval.h */
/* */
/* FreeType API for validating OpenType tables (specification). */
/* */
/* Copyright 2004, 2005, 2006, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* */
/* Warning: This module might be moved to a different library in the */
/* future to avoid a tight dependency between FreeType and the */
/* OpenType specification. */
/* */
/* */
/***************************************************************************/
#define __FTOTVAL_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* ot_validation */
/* */
/* <Title> */
/* OpenType Validation */
/* */
/* <Abstract> */
/* An API to validate OpenType tables. */
/* */
/* <Description> */
/* This section contains the declaration of functions to validate */
/* some OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH). */
/* */
/*************************************************************************/
/**********************************************************************
*
* @enum:
* FT_VALIDATE_OTXXX
*
* @description:
* A list of bit-field constants used with @FT_OpenType_Validate to
* indicate which OpenType tables should be validated.
*
* @values:
* FT_VALIDATE_BASE ::
* Validate BASE table.
*
* FT_VALIDATE_GDEF ::
* Validate GDEF table.
*
* FT_VALIDATE_GPOS ::
* Validate GPOS table.
*
* FT_VALIDATE_GSUB ::
* Validate GSUB table.
*
* FT_VALIDATE_JSTF ::
* Validate JSTF table.
*
* FT_VALIDATE_MATH ::
* Validate MATH table.
*
* FT_VALIDATE_OT ::
* Validate all OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH).
*
*/
#define FT_VALIDATE_BASE 0x0100
#define FT_VALIDATE_GDEF 0x0200
#define FT_VALIDATE_GPOS 0x0400
#define FT_VALIDATE_GSUB 0x0800
#define FT_VALIDATE_JSTF 0x1000
#define FT_VALIDATE_MATH 0x2000
#define FT_VALIDATE_OT FT_VALIDATE_BASE | \
FT_VALIDATE_GDEF | \
FT_VALIDATE_GPOS | \
FT_VALIDATE_GSUB | \
FT_VALIDATE_JSTF | \
FT_VALIDATE_MATH
/* */
/**********************************************************************
*
* @function:
* FT_OpenType_Validate
*
* @description:
* Validate various OpenType tables to assure that all offsets and
* indices are valid. The idea is that a higher-level library which
* actually does the text layout can access those tables without
* error checking (which can be quite time consuming).
*
* @input:
* face ::
* A handle to the input face.
*
* validation_flags ::
* A bit field which specifies the tables to be validated. See
* @FT_VALIDATE_OTXXX for possible values.
*
* @output:
* BASE_table ::
* A pointer to the BASE table.
*
* GDEF_table ::
* A pointer to the GDEF table.
*
* GPOS_table ::
* A pointer to the GPOS table.
*
* GSUB_table ::
* A pointer to the GSUB table.
*
* JSTF_table ::
* A pointer to the JSTF table.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function only works with OpenType fonts, returning an error
* otherwise.
*
* After use, the application should deallocate the five tables with
* @FT_OpenType_Free. A NULL value indicates that the table either
* doesn't exist in the font, or the application hasn't asked for
* validation.
*/
FT_EXPORT( FT_Error )
FT_OpenType_Validate( FT_Face face,
FT_UInt validation_flags,
FT_Bytes *BASE_table,
FT_Bytes *GDEF_table,
FT_Bytes *GPOS_table,
FT_Bytes *GSUB_table,
FT_Bytes *JSTF_table );
/* */
/**********************************************************************
*
* @function:
* FT_OpenType_Free
*
* @description:
* Free the buffer allocated by OpenType validator.
*
* @input:
* face ::
* A handle to the input face.
*
* table ::
* The pointer to the buffer that is allocated by
* @FT_OpenType_Validate.
*
* @note:
* This function must be used to free the buffer allocated by
* @FT_OpenType_Validate only.
*/
FT_EXPORT( void )
FT_OpenType_Free( FT_Face face,
FT_Bytes table );
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
#define FT_SERVICE_ID_OPENTYPE_VALIDATE "opentype-validate"
typedef FT_Error
(*otv_validate_func)( FT_Face volatile face,
FT_UInt ot_flags,
FT_Bytes *base,
FT_Bytes *gdef,
FT_Bytes *gpos,
FT_Bytes *gsub,
FT_Bytes *jstf );
FT_DEFINE_SERVICE( OTvalidate )
{
otv_validate_func validate;
};
/* */
FT_END_HEADER
/* END */
/* documentation is in ftotval.h */
FT_EXPORT_DEF( FT_Error )
FT_OpenType_Validate( FT_Face face,
FT_UInt validation_flags,
FT_Bytes *BASE_table,
FT_Bytes *GDEF_table,
FT_Bytes *GPOS_table,
FT_Bytes *GSUB_table,
FT_Bytes *JSTF_table )
{
FT_Service_OTvalidate service;
FT_Error error;
if ( !face )
{
error = FT_Err_Invalid_Face_Handle;
goto Exit;
}
if ( !( BASE_table &&
GDEF_table &&
GPOS_table &&
GSUB_table &&
JSTF_table ) )
{
error = FT_Err_Invalid_Argument;
goto Exit;
}
FT_FACE_FIND_GLOBAL_SERVICE( face, service, OPENTYPE_VALIDATE );
if ( service )
error = service->validate( face,
validation_flags,
BASE_table,
GDEF_table,
GPOS_table,
GSUB_table,
JSTF_table );
else
error = FT_Err_Unimplemented_Feature;
Exit:
return error;
}
FT_EXPORT_DEF( void )
FT_OpenType_Free( FT_Face face,
FT_Bytes table )
{
FT_Memory memory;
if ( !face )
return;
memory = FT_FACE_MEMORY( face );
FT_FREE( table );
}
/* END */
/***************************************************************************/
/* */
/* ftpatent.c */
/* */
/* FreeType API for checking patented TrueType bytecode instructions */
/* (body). */
/* */
/* Copyright 2007, 2008, 2010 by David Turner. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* svttglyf.h */
/* */
/* The FreeType TrueType glyph service. */
/* */
/* Copyright 2007, 2009, 2012 by David Turner. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVTTGLYF_H__
FT_BEGIN_HEADER
#define FT_SERVICE_ID_TT_GLYF "tt-glyf"
typedef FT_ULong
(*TT_Glyf_GetLocationFunc)( FT_Face face,
FT_UInt gindex,
FT_ULong *psize );
FT_DEFINE_SERVICE( TTGlyf )
{
TT_Glyf_GetLocationFunc get_location;
};
#define FT_DEFINE_SERVICE_TTGLYFREC( class_, get_location_ ) \
static const FT_Service_TTGlyfRec class_ = \
{ \
get_location_ \
};
/* */
FT_END_HEADER
/* END */
static FT_Bool
_tt_check_patents_in_range( FT_Stream stream,
FT_ULong size )
{
FT_Bool result = FALSE;
FT_Error error;
FT_Bytes p, end;
if ( FT_FRAME_ENTER( size ) )
return 0;
p = stream->cursor;
end = p + size;
while ( p < end )
{
switch (p[0])
{
/* SPvTL // */
case 0x06:
/* SPvTL + */
case 0x07:
/* SFvTL // */
case 0x08:
/* SFvTL + */
case 0x09:
/* SPvFS */
case 0x0A:
/* SFvFS */
case 0x0B:
result = TRUE;
goto Exit;
case 0x40:
if ( p + 1 >= end )
goto Exit;
p += p[1] + 2;
break;
case 0x41:
if ( p + 1 >= end )
goto Exit;
p += p[1] * 2 + 2;
break;
/* DELTAP2 */
case 0x71:
/* DELTAP3 */
case 0x72:
/* DELTAC0 */
case 0x73:
/* DELTAC1 */
case 0x74:
/* DELTAC2 */
case 0x75:
result = TRUE;
goto Exit;
case 0xB0:
case 0xB1:
case 0xB2:
case 0xB3:
case 0xB4:
case 0xB5:
case 0xB6:
case 0xB7:
p += ( p[0] - 0xB0 ) + 2;
break;
case 0xB8:
case 0xB9:
case 0xBA:
case 0xBB:
case 0xBC:
case 0xBD:
case 0xBE:
case 0xBF:
p += ( p[0] - 0xB8 ) * 2 + 3;
break;
default:
p += 1;
break;
}
}
Exit:
FT_UNUSED( error );
FT_FRAME_EXIT();
return result;
}
static FT_Bool
_tt_check_patents_in_table( FT_Face face,
FT_ULong tag )
{
FT_Stream stream = face->stream;
FT_Error error = FT_Err_Ok;
FT_Service_SFNT_Table service;
FT_Bool result = FALSE;
FT_FACE_FIND_SERVICE( face, service, SFNT_TABLE );
if ( service )
{
FT_UInt i = 0;
FT_ULong tag_i = 0, offset_i = 0, length_i = 0;
for ( i = 0; !error && tag_i != tag ; i++ )
error = service->table_info( face, i,
&tag_i, &offset_i, &length_i );
if ( error ||
FT_STREAM_SEEK( offset_i ) )
goto Exit;
result = _tt_check_patents_in_range( stream, length_i );
}
Exit:
return result;
}
static FT_Bool
_tt_face_check_patents( FT_Face face )
{
FT_Stream stream = face->stream;
FT_UInt gindex;
FT_Error error;
FT_Bool result;
FT_Service_TTGlyf service;
result = _tt_check_patents_in_table( face, TTAG_fpgm );
if ( result )
goto Exit;
result = _tt_check_patents_in_table( face, TTAG_prep );
if ( result )
goto Exit;
FT_FACE_FIND_SERVICE( face, service, TT_GLYF );
if ( service == NULL )
goto Exit;
for ( gindex = 0; gindex < (FT_UInt)face->num_glyphs; gindex++ )
{
FT_ULong offset, num_ins, size;
FT_Int num_contours;
offset = service->get_location( face, gindex, &size );
if ( size == 0 )
continue;
if ( FT_STREAM_SEEK( offset ) ||
FT_READ_SHORT( num_contours ) )
continue;
/* simple glyph */
if ( num_contours >= 0 )
{
if ( FT_STREAM_SKIP( 8 + num_contours * 2 ) )
continue;
}
/* compound glyph */
else
{
FT_Bool has_instr = 0;
if ( FT_STREAM_SKIP( 8 ) )
continue;
/* now read each component */
for (;;)
{
FT_UInt flags, toskip;
if( FT_READ_USHORT( flags ) )
break;
toskip = 2 + 1 + 1;
/* ARGS_ARE_WORDS */
if ( ( flags & ( 1 << 0 ) ) != 0 )
toskip += 2;
/* WE_HAVE_A_SCALE */
if ( ( flags & ( 1 << 3 ) ) != 0 )
toskip += 2;
/* WE_HAVE_X_Y_SCALE */
else if ( ( flags & ( 1 << 6 ) ) != 0 )
toskip += 4;
/* WE_HAVE_A_2x2 */
else if ( ( flags & ( 1 << 7 ) ) != 0 )
toskip += 8;
/* WE_HAVE_INSTRUCTIONS */
if ( ( flags & ( 1 << 8 ) ) != 0 )
has_instr = 1;
if ( FT_STREAM_SKIP( toskip ) )
goto NextGlyph;
/* MORE_COMPONENTS */
if ( ( flags & ( 1 << 5 ) ) == 0 )
break;
}
if ( !has_instr )
goto NextGlyph;
}
if ( FT_READ_USHORT( num_ins ) )
continue;
result = _tt_check_patents_in_range( stream, num_ins );
if ( result )
goto Exit;
NextGlyph:
;
}
Exit:
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Bool )
FT_Face_CheckTrueTypePatents( FT_Face face )
{
FT_Bool result = FALSE;
if ( face && FT_IS_SFNT( face ) )
result = _tt_face_check_patents( face );
return result;
}
/* documentation is in freetype.h */
FT_EXPORT_DEF( FT_Bool )
FT_Face_SetUnpatentedHinting( FT_Face face,
FT_Bool value )
{
FT_Bool result = FALSE;
#if defined( TT_CONFIG_OPTION_UNPATENTED_HINTING ) && \
!defined( TT_CONFIG_OPTION_BYTECODE_INTERPRETER )
if ( face && FT_IS_SFNT( face ) )
{
result = !face->internal->ignore_unpatented_hinter;
face->internal->ignore_unpatented_hinter = !value;
}
#else
FT_UNUSED( face );
FT_UNUSED( value );
#endif
return result;
}
/* END */
/***************************************************************************/
/* */
/* ftpfr.c */
/* */
/* FreeType API for accessing PFR-specific data (body). */
/* */
/* Copyright 2002, 2003, 2004, 2008, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* svpfr.h */
/* */
/* Internal PFR service functions (specification). */
/* */
/* Copyright 2003, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVPFR_H__
/***************************************************************************/
/* */
/* ftpfr.h */
/* */
/* FreeType API for accessing PFR-specific data (specification only). */
/* */
/* Copyright 2002, 2003, 2004, 2006, 2008, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTPFR_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* pfr_fonts */
/* */
/* <Title> */
/* PFR Fonts */
/* */
/* <Abstract> */
/* PFR/TrueDoc specific API. */
/* */
/* <Description> */
/* This section contains the declaration of PFR-specific functions. */
/* */
/*************************************************************************/
/**********************************************************************
*
* @function:
* FT_Get_PFR_Metrics
*
* @description:
* Return the outline and metrics resolutions of a given PFR face.
*
* @input:
* face :: Handle to the input face. It can be a non-PFR face.
*
* @output:
* aoutline_resolution ::
* Outline resolution. This is equivalent to `face->units_per_EM'
* for non-PFR fonts. Optional (parameter can be NULL).
*
* ametrics_resolution ::
* Metrics resolution. This is equivalent to `outline_resolution'
* for non-PFR fonts. Optional (parameter can be NULL).
*
* ametrics_x_scale ::
* A 16.16 fixed-point number used to scale distance expressed
* in metrics units to device sub-pixels. This is equivalent to
* `face->size->x_scale', but for metrics only. Optional (parameter
* can be NULL).
*
* ametrics_y_scale ::
* Same as `ametrics_x_scale' but for the vertical direction.
* optional (parameter can be NULL).
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* If the input face is not a PFR, this function will return an error.
* However, in all cases, it will return valid values.
*/
FT_EXPORT( FT_Error )
FT_Get_PFR_Metrics( FT_Face face,
FT_UInt *aoutline_resolution,
FT_UInt *ametrics_resolution,
FT_Fixed *ametrics_x_scale,
FT_Fixed *ametrics_y_scale );
/**********************************************************************
*
* @function:
* FT_Get_PFR_Kerning
*
* @description:
* Return the kerning pair corresponding to two glyphs in a PFR face.
* The distance is expressed in metrics units, unlike the result of
* @FT_Get_Kerning.
*
* @input:
* face :: A handle to the input face.
*
* left :: Index of the left glyph.
*
* right :: Index of the right glyph.
*
* @output:
* avector :: A kerning vector.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function always return distances in original PFR metrics
* units. This is unlike @FT_Get_Kerning with the @FT_KERNING_UNSCALED
* mode, which always returns distances converted to outline units.
*
* You can use the value of the `x_scale' and `y_scale' parameters
* returned by @FT_Get_PFR_Metrics to scale these to device sub-pixels.
*/
FT_EXPORT( FT_Error )
FT_Get_PFR_Kerning( FT_Face face,
FT_UInt left,
FT_UInt right,
FT_Vector *avector );
/**********************************************************************
*
* @function:
* FT_Get_PFR_Advance
*
* @description:
* Return a given glyph advance, expressed in original metrics units,
* from a PFR font.
*
* @input:
* face :: A handle to the input face.
*
* gindex :: The glyph index.
*
* @output:
* aadvance :: The glyph advance in metrics units.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* You can use the `x_scale' or `y_scale' results of @FT_Get_PFR_Metrics
* to convert the advance to device sub-pixels (i.e., 1/64th of pixels).
*/
FT_EXPORT( FT_Error )
FT_Get_PFR_Advance( FT_Face face,
FT_UInt gindex,
FT_Pos *aadvance );
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
#define FT_SERVICE_ID_PFR_METRICS "pfr-metrics"
typedef FT_Error
(*FT_PFR_GetMetricsFunc)( FT_Face face,
FT_UInt *aoutline,
FT_UInt *ametrics,
FT_Fixed *ax_scale,
FT_Fixed *ay_scale );
typedef FT_Error
(*FT_PFR_GetKerningFunc)( FT_Face face,
FT_UInt left,
FT_UInt right,
FT_Vector *avector );
typedef FT_Error
(*FT_PFR_GetAdvanceFunc)( FT_Face face,
FT_UInt gindex,
FT_Pos *aadvance );
FT_DEFINE_SERVICE( PfrMetrics )
{
FT_PFR_GetMetricsFunc get_metrics;
FT_PFR_GetKerningFunc get_kerning;
FT_PFR_GetAdvanceFunc get_advance;
};
/* */
FT_END_HEADER
/* END */
/* check the format */
static FT_Service_PfrMetrics
ft_pfr_check( FT_Face face )
{
FT_Service_PfrMetrics service = NULL;
if ( face )
FT_FACE_LOOKUP_SERVICE( face, service, PFR_METRICS );
return service;
}
/* documentation is in ftpfr.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_PFR_Metrics( FT_Face face,
FT_UInt *aoutline_resolution,
FT_UInt *ametrics_resolution,
FT_Fixed *ametrics_x_scale,
FT_Fixed *ametrics_y_scale )
{
FT_Error error = FT_Err_Ok;
FT_Service_PfrMetrics service;
if ( !face )
return FT_Err_Invalid_Argument;
service = ft_pfr_check( face );
if ( service )
{
error = service->get_metrics( face,
aoutline_resolution,
ametrics_resolution,
ametrics_x_scale,
ametrics_y_scale );
}
else
{
FT_Fixed x_scale, y_scale;
/* this is not a PFR font */
if ( aoutline_resolution )
*aoutline_resolution = face->units_per_EM;
if ( ametrics_resolution )
*ametrics_resolution = face->units_per_EM;
x_scale = y_scale = 0x10000L;
if ( face->size )
{
x_scale = face->size->metrics.x_scale;
y_scale = face->size->metrics.y_scale;
}
if ( ametrics_x_scale )
*ametrics_x_scale = x_scale;
if ( ametrics_y_scale )
*ametrics_y_scale = y_scale;
error = FT_Err_Unknown_File_Format;
}
return error;
}
/* documentation is in ftpfr.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_PFR_Kerning( FT_Face face,
FT_UInt left,
FT_UInt right,
FT_Vector *avector )
{
FT_Error error;
FT_Service_PfrMetrics service;
if ( !face )
return FT_Err_Invalid_Argument;
service = ft_pfr_check( face );
if ( service )
error = service->get_kerning( face, left, right, avector );
else
error = FT_Get_Kerning( face, left, right,
FT_KERNING_UNSCALED, avector );
return error;
}
/* documentation is in ftpfr.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_PFR_Advance( FT_Face face,
FT_UInt gindex,
FT_Pos *aadvance )
{
FT_Error error;
FT_Service_PfrMetrics service;
service = ft_pfr_check( face );
if ( service )
{
error = service->get_advance( face, gindex, aadvance );
}
else
/* XXX: TODO: PROVIDE ADVANCE-LOADING METHOD TO ALL FONT DRIVERS */
error = FT_Err_Invalid_Argument;
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftstroke.c */
/* */
/* FreeType path stroker (body). */
/* */
/* Copyright 2002-2006, 2008-2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftstroke.h */
/* */
/* FreeType path stroker (specification). */
/* */
/* Copyright 2002-2006, 2008, 2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef __FT_STROKE_H__
#define __FT_STROKE_H__
FT_BEGIN_HEADER
/************************************************************************
*
* @section:
* glyph_stroker
*
* @title:
* Glyph Stroker
*
* @abstract:
* Generating bordered and stroked glyphs.
*
* @description:
* This component generates stroked outlines of a given vectorial
* glyph. It also allows you to retrieve the `outside' and/or the
* `inside' borders of the stroke.
*
* This can be useful to generate `bordered' glyph, i.e., glyphs
* displayed with a coloured (and anti-aliased) border around their
* shape.
*/
/**************************************************************
*
* @type:
* FT_Stroker
*
* @description:
* Opaque handler to a path stroker object.
*/
typedef struct FT_StrokerRec_* FT_Stroker;
/**************************************************************
*
* @enum:
* FT_Stroker_LineJoin
*
* @description:
* These values determine how two joining lines are rendered
* in a stroker.
*
* @values:
* FT_STROKER_LINEJOIN_ROUND ::
* Used to render rounded line joins. Circular arcs are used
* to join two lines smoothly.
*
* FT_STROKER_LINEJOIN_BEVEL ::
* Used to render beveled line joins. The outer corner of
* the joined lines is filled by enclosing the triangular
* region of the corner with a straight line between the
* outer corners of each stroke.
*
* FT_STROKER_LINEJOIN_MITER_FIXED ::
* Used to render mitered line joins, with fixed bevels if the
* miter limit is exceeded. The outer edges of the strokes
* for the two segments are extended until they meet at an
* angle. If the segments meet at too sharp an angle (such
* that the miter would extend from the intersection of the
* segments a distance greater than the product of the miter
* limit value and the border radius), then a bevel join (see
* above) is used instead. This prevents long spikes being
* created. FT_STROKER_LINEJOIN_MITER_FIXED generates a miter
* line join as used in PostScript and PDF.
*
* FT_STROKER_LINEJOIN_MITER_VARIABLE ::
* FT_STROKER_LINEJOIN_MITER ::
* Used to render mitered line joins, with variable bevels if
* the miter limit is exceeded. The intersection of the
* strokes is clipped at a line perpendicular to the bisector
* of the angle between the strokes, at the distance from the
* intersection of the segments equal to the product of the
* miter limit value and the border radius. This prevents
* long spikes being created.
* FT_STROKER_LINEJOIN_MITER_VARIABLE generates a mitered line
* join as used in XPS. FT_STROKER_LINEJOIN_MITER is an alias
* for FT_STROKER_LINEJOIN_MITER_VARIABLE, retained for
* backwards compatibility.
*/
typedef enum FT_Stroker_LineJoin_
{
FT_STROKER_LINEJOIN_ROUND = 0,
FT_STROKER_LINEJOIN_BEVEL = 1,
FT_STROKER_LINEJOIN_MITER_VARIABLE = 2,
FT_STROKER_LINEJOIN_MITER = FT_STROKER_LINEJOIN_MITER_VARIABLE,
FT_STROKER_LINEJOIN_MITER_FIXED = 3
} FT_Stroker_LineJoin;
/**************************************************************
*
* @enum:
* FT_Stroker_LineCap
*
* @description:
* These values determine how the end of opened sub-paths are
* rendered in a stroke.
*
* @values:
* FT_STROKER_LINECAP_BUTT ::
* The end of lines is rendered as a full stop on the last
* point itself.
*
* FT_STROKER_LINECAP_ROUND ::
* The end of lines is rendered as a half-circle around the
* last point.
*
* FT_STROKER_LINECAP_SQUARE ::
* The end of lines is rendered as a square around the
* last point.
*/
typedef enum FT_Stroker_LineCap_
{
FT_STROKER_LINECAP_BUTT = 0,
FT_STROKER_LINECAP_ROUND,
FT_STROKER_LINECAP_SQUARE
} FT_Stroker_LineCap;
/**************************************************************
*
* @enum:
* FT_StrokerBorder
*
* @description:
* These values are used to select a given stroke border
* in @FT_Stroker_GetBorderCounts and @FT_Stroker_ExportBorder.
*
* @values:
* FT_STROKER_BORDER_LEFT ::
* Select the left border, relative to the drawing direction.
*
* FT_STROKER_BORDER_RIGHT ::
* Select the right border, relative to the drawing direction.
*
* @note:
* Applications are generally interested in the `inside' and `outside'
* borders. However, there is no direct mapping between these and the
* `left' and `right' ones, since this really depends on the glyph's
* drawing orientation, which varies between font formats.
*
* You can however use @FT_Outline_GetInsideBorder and
* @FT_Outline_GetOutsideBorder to get these.
*/
typedef enum FT_StrokerBorder_
{
FT_STROKER_BORDER_LEFT = 0,
FT_STROKER_BORDER_RIGHT
} FT_StrokerBorder;
/**************************************************************
*
* @function:
* FT_Outline_GetInsideBorder
*
* @description:
* Retrieve the @FT_StrokerBorder value corresponding to the
* `inside' borders of a given outline.
*
* @input:
* outline ::
* The source outline handle.
*
* @return:
* The border index. @FT_STROKER_BORDER_RIGHT for empty or invalid
* outlines.
*/
FT_EXPORT( FT_StrokerBorder )
FT_Outline_GetInsideBorder( FT_Outline* outline );
/**************************************************************
*
* @function:
* FT_Outline_GetOutsideBorder
*
* @description:
* Retrieve the @FT_StrokerBorder value corresponding to the
* `outside' borders of a given outline.
*
* @input:
* outline ::
* The source outline handle.
*
* @return:
* The border index. @FT_STROKER_BORDER_LEFT for empty or invalid
* outlines.
*/
FT_EXPORT( FT_StrokerBorder )
FT_Outline_GetOutsideBorder( FT_Outline* outline );
/**************************************************************
*
* @function:
* FT_Stroker_New
*
* @description:
* Create a new stroker object.
*
* @input:
* library ::
* FreeType library handle.
*
* @output:
* astroker ::
* A new stroker object handle. NULL in case of error.
*
* @return:
* FreeType error code. 0~means success.
*/
FT_EXPORT( FT_Error )
FT_Stroker_New( FT_Library library,
FT_Stroker *astroker );
/**************************************************************
*
* @function:
* FT_Stroker_Set
*
* @description:
* Reset a stroker object's attributes.
*
* @input:
* stroker ::
* The target stroker handle.
*
* radius ::
* The border radius.
*
* line_cap ::
* The line cap style.
*
* line_join ::
* The line join style.
*
* miter_limit ::
* The miter limit for the FT_STROKER_LINEJOIN_MITER_FIXED and
* FT_STROKER_LINEJOIN_MITER_VARIABLE line join styles,
* expressed as 16.16 fixed point value.
*
* @note:
* The radius is expressed in the same units as the outline
* coordinates.
*/
FT_EXPORT( void )
FT_Stroker_Set( FT_Stroker stroker,
FT_Fixed radius,
FT_Stroker_LineCap line_cap,
FT_Stroker_LineJoin line_join,
FT_Fixed miter_limit );
/**************************************************************
*
* @function:
* FT_Stroker_Rewind
*
* @description:
* Reset a stroker object without changing its attributes.
* You should call this function before beginning a new
* series of calls to @FT_Stroker_BeginSubPath or
* @FT_Stroker_EndSubPath.
*
* @input:
* stroker ::
* The target stroker handle.
*/
FT_EXPORT( void )
FT_Stroker_Rewind( FT_Stroker stroker );
/**************************************************************
*
* @function:
* FT_Stroker_ParseOutline
*
* @description:
* A convenience function used to parse a whole outline with
* the stroker. The resulting outline(s) can be retrieved
* later by functions like @FT_Stroker_GetCounts and @FT_Stroker_Export.
*
* @input:
* stroker ::
* The target stroker handle.
*
* outline ::
* The source outline.
*
* opened ::
* A boolean. If~1, the outline is treated as an open path instead
* of a closed one.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* If `opened' is~0 (the default), the outline is treated as a closed
* path, and the stroker generates two distinct `border' outlines.
*
* If `opened' is~1, the outline is processed as an open path, and the
* stroker generates a single `stroke' outline.
*
* This function calls @FT_Stroker_Rewind automatically.
*/
FT_EXPORT( FT_Error )
FT_Stroker_ParseOutline( FT_Stroker stroker,
FT_Outline* outline,
FT_Bool opened );
/**************************************************************
*
* @function:
* FT_Stroker_BeginSubPath
*
* @description:
* Start a new sub-path in the stroker.
*
* @input:
* stroker ::
* The target stroker handle.
*
* to ::
* A pointer to the start vector.
*
* open ::
* A boolean. If~1, the sub-path is treated as an open one.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function is useful when you need to stroke a path that is
* not stored as an @FT_Outline object.
*/
FT_EXPORT( FT_Error )
FT_Stroker_BeginSubPath( FT_Stroker stroker,
FT_Vector* to,
FT_Bool open );
/**************************************************************
*
* @function:
* FT_Stroker_EndSubPath
*
* @description:
* Close the current sub-path in the stroker.
*
* @input:
* stroker ::
* The target stroker handle.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* You should call this function after @FT_Stroker_BeginSubPath.
* If the subpath was not `opened', this function `draws' a
* single line segment to the start position when needed.
*/
FT_EXPORT( FT_Error )
FT_Stroker_EndSubPath( FT_Stroker stroker );
/**************************************************************
*
* @function:
* FT_Stroker_LineTo
*
* @description:
* `Draw' a single line segment in the stroker's current sub-path,
* from the last position.
*
* @input:
* stroker ::
* The target stroker handle.
*
* to ::
* A pointer to the destination point.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* You should call this function between @FT_Stroker_BeginSubPath and
* @FT_Stroker_EndSubPath.
*/
FT_EXPORT( FT_Error )
FT_Stroker_LineTo( FT_Stroker stroker,
FT_Vector* to );
/**************************************************************
*
* @function:
* FT_Stroker_ConicTo
*
* @description:
* `Draw' a single quadratic Bézier in the stroker's current sub-path,
* from the last position.
*
* @input:
* stroker ::
* The target stroker handle.
*
* control ::
* A pointer to a Bézier control point.
*
* to ::
* A pointer to the destination point.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* You should call this function between @FT_Stroker_BeginSubPath and
* @FT_Stroker_EndSubPath.
*/
FT_EXPORT( FT_Error )
FT_Stroker_ConicTo( FT_Stroker stroker,
FT_Vector* control,
FT_Vector* to );
/**************************************************************
*
* @function:
* FT_Stroker_CubicTo
*
* @description:
* `Draw' a single cubic Bézier in the stroker's current sub-path,
* from the last position.
*
* @input:
* stroker ::
* The target stroker handle.
*
* control1 ::
* A pointer to the first Bézier control point.
*
* control2 ::
* A pointer to second Bézier control point.
*
* to ::
* A pointer to the destination point.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* You should call this function between @FT_Stroker_BeginSubPath and
* @FT_Stroker_EndSubPath.
*/
FT_EXPORT( FT_Error )
FT_Stroker_CubicTo( FT_Stroker stroker,
FT_Vector* control1,
FT_Vector* control2,
FT_Vector* to );
/**************************************************************
*
* @function:
* FT_Stroker_GetBorderCounts
*
* @description:
* Call this function once you have finished parsing your paths
* with the stroker. It returns the number of points and
* contours necessary to export one of the `border' or `stroke'
* outlines generated by the stroker.
*
* @input:
* stroker ::
* The target stroker handle.
*
* border ::
* The border index.
*
* @output:
* anum_points ::
* The number of points.
*
* anum_contours ::
* The number of contours.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* When an outline, or a sub-path, is `closed', the stroker generates
* two independent `border' outlines, named `left' and `right'.
*
* When the outline, or a sub-path, is `opened', the stroker merges
* the `border' outlines with caps. The `left' border receives all
* points, while the `right' border becomes empty.
*
* Use the function @FT_Stroker_GetCounts instead if you want to
* retrieve the counts associated to both borders.
*/
FT_EXPORT( FT_Error )
FT_Stroker_GetBorderCounts( FT_Stroker stroker,
FT_StrokerBorder border,
FT_UInt *anum_points,
FT_UInt *anum_contours );
/**************************************************************
*
* @function:
* FT_Stroker_ExportBorder
*
* @description:
* Call this function after @FT_Stroker_GetBorderCounts to
* export the corresponding border to your own @FT_Outline
* structure.
*
* Note that this function appends the border points and
* contours to your outline, but does not try to resize its
* arrays.
*
* @input:
* stroker ::
* The target stroker handle.
*
* border ::
* The border index.
*
* outline ::
* The target outline handle.
*
* @note:
* Always call this function after @FT_Stroker_GetBorderCounts to
* get sure that there is enough room in your @FT_Outline object to
* receive all new data.
*
* When an outline, or a sub-path, is `closed', the stroker generates
* two independent `border' outlines, named `left' and `right'
*
* When the outline, or a sub-path, is `opened', the stroker merges
* the `border' outlines with caps. The `left' border receives all
* points, while the `right' border becomes empty.
*
* Use the function @FT_Stroker_Export instead if you want to
* retrieve all borders at once.
*/
FT_EXPORT( void )
FT_Stroker_ExportBorder( FT_Stroker stroker,
FT_StrokerBorder border,
FT_Outline* outline );
/**************************************************************
*
* @function:
* FT_Stroker_GetCounts
*
* @description:
* Call this function once you have finished parsing your paths
* with the stroker. It returns the number of points and
* contours necessary to export all points/borders from the stroked
* outline/path.
*
* @input:
* stroker ::
* The target stroker handle.
*
* @output:
* anum_points ::
* The number of points.
*
* anum_contours ::
* The number of contours.
*
* @return:
* FreeType error code. 0~means success.
*/
FT_EXPORT( FT_Error )
FT_Stroker_GetCounts( FT_Stroker stroker,
FT_UInt *anum_points,
FT_UInt *anum_contours );
/**************************************************************
*
* @function:
* FT_Stroker_Export
*
* @description:
* Call this function after @FT_Stroker_GetBorderCounts to
* export all borders to your own @FT_Outline structure.
*
* Note that this function appends the border points and
* contours to your outline, but does not try to resize its
* arrays.
*
* @input:
* stroker ::
* The target stroker handle.
*
* outline ::
* The target outline handle.
*/
FT_EXPORT( void )
FT_Stroker_Export( FT_Stroker stroker,
FT_Outline* outline );
/**************************************************************
*
* @function:
* FT_Stroker_Done
*
* @description:
* Destroy a stroker object.
*
* @input:
* stroker ::
* A stroker handle. Can be NULL.
*/
FT_EXPORT( void )
FT_Stroker_Done( FT_Stroker stroker );
/**************************************************************
*
* @function:
* FT_Glyph_Stroke
*
* @description:
* Stroke a given outline glyph object with a given stroker.
*
* @inout:
* pglyph ::
* Source glyph handle on input, new glyph handle on output.
*
* @input:
* stroker ::
* A stroker handle.
*
* destroy ::
* A Boolean. If~1, the source glyph object is destroyed
* on success.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* The source glyph is untouched in case of error.
*
* Adding stroke may yield a significantly wider and taller glyph
* depending on how large of a radius was used to stroke the glyph. You
* may need to manually adjust horizontal and vertical advance amounts
* to account for this added size.
*/
FT_EXPORT( FT_Error )
FT_Glyph_Stroke( FT_Glyph *pglyph,
FT_Stroker stroker,
FT_Bool destroy );
/**************************************************************
*
* @function:
* FT_Glyph_StrokeBorder
*
* @description:
* Stroke a given outline glyph object with a given stroker, but
* only return either its inside or outside border.
*
* @inout:
* pglyph ::
* Source glyph handle on input, new glyph handle on output.
*
* @input:
* stroker ::
* A stroker handle.
*
* inside ::
* A Boolean. If~1, return the inside border, otherwise
* the outside border.
*
* destroy ::
* A Boolean. If~1, the source glyph object is destroyed
* on success.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* The source glyph is untouched in case of error.
*
* Adding stroke may yield a significantly wider and taller glyph
* depending on how large of a radius was used to stroke the glyph. You
* may need to manually adjust horizontal and vertical advance amounts
* to account for this added size.
*/
FT_EXPORT( FT_Error )
FT_Glyph_StrokeBorder( FT_Glyph *pglyph,
FT_Stroker stroker,
FT_Bool inside,
FT_Bool destroy );
/* */
FT_END_HEADER
/* __FT_STROKE_H__ */
#endif
/* END */
/* Local Variables: */
/* coding: utf-8 */
/* End: */
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_StrokerBorder )
FT_Outline_GetInsideBorder( FT_Outline* outline )
{
FT_Orientation o = FT_Outline_Get_Orientation( outline );
return o == FT_ORIENTATION_TRUETYPE ? FT_STROKER_BORDER_RIGHT
: FT_STROKER_BORDER_LEFT;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_StrokerBorder )
FT_Outline_GetOutsideBorder( FT_Outline* outline )
{
FT_Orientation o = FT_Outline_Get_Orientation( outline );
return o == FT_ORIENTATION_TRUETYPE ? FT_STROKER_BORDER_LEFT
: FT_STROKER_BORDER_RIGHT;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** BEZIER COMPUTATIONS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
#define FT_SMALL_CONIC_THRESHOLD ( FT_ANGLE_PI / 6 )
#define FT_SMALL_CUBIC_THRESHOLD ( FT_ANGLE_PI / 8 )
#define FT_EPSILON 2
#define FT_IS_SMALL( x ) ( (x) > -FT_EPSILON && (x) < FT_EPSILON )
static FT_Pos
ft_pos_abs( FT_Pos x )
{
return x >= 0 ? x : -x;
}
static void
ft_conic_split( FT_Vector* base )
{
FT_Pos a, b;
base[4].x = base[2].x;
b = base[1].x;
a = base[3].x = ( base[2].x + b ) / 2;
b = base[1].x = ( base[0].x + b ) / 2;
base[2].x = ( a + b ) / 2;
base[4].y = base[2].y;
b = base[1].y;
a = base[3].y = ( base[2].y + b ) / 2;
b = base[1].y = ( base[0].y + b ) / 2;
base[2].y = ( a + b ) / 2;
}
static FT_Bool
ft_conic_is_small_enough( FT_Vector* base,
FT_Angle *angle_in,
FT_Angle *angle_out )
{
FT_Vector d1, d2;
FT_Angle theta;
FT_Int close1, close2;
d1.x = base[1].x - base[2].x;
d1.y = base[1].y - base[2].y;
d2.x = base[0].x - base[1].x;
d2.y = base[0].y - base[1].y;
close1 = FT_IS_SMALL( d1.x ) && FT_IS_SMALL( d1.y );
close2 = FT_IS_SMALL( d2.x ) && FT_IS_SMALL( d2.y );
if ( close1 )
{
if ( close2 )
{
/* basically a point; */
/* do nothing to retain original direction */
}
else
{
*angle_in =
*angle_out = FT_Atan2( d2.x, d2.y );
}
}
/* !close1 */
else
{
if ( close2 )
{
*angle_in =
*angle_out = FT_Atan2( d1.x, d1.y );
}
else
{
*angle_in = FT_Atan2( d1.x, d1.y );
*angle_out = FT_Atan2( d2.x, d2.y );
}
}
theta = ft_pos_abs( FT_Angle_Diff( *angle_in, *angle_out ) );
return FT_BOOL( theta < FT_SMALL_CONIC_THRESHOLD );
}
static void
ft_cubic_split( FT_Vector* base )
{
FT_Pos a, b, c, d;
base[6].x = base[3].x;
c = base[1].x;
d = base[2].x;
base[1].x = a = ( base[0].x + c ) / 2;
base[5].x = b = ( base[3].x + d ) / 2;
c = ( c + d ) / 2;
base[2].x = a = ( a + c ) / 2;
base[4].x = b = ( b + c ) / 2;
base[3].x = ( a + b ) / 2;
base[6].y = base[3].y;
c = base[1].y;
d = base[2].y;
base[1].y = a = ( base[0].y + c ) / 2;
base[5].y = b = ( base[3].y + d ) / 2;
c = ( c + d ) / 2;
base[2].y = a = ( a + c ) / 2;
base[4].y = b = ( b + c ) / 2;
base[3].y = ( a + b ) / 2;
}
/* Return the average of `angle1' and `angle2'. */
/* This gives correct result even if `angle1' and `angle2' */
/* have opposite signs. */
static FT_Angle
ft_angle_mean( FT_Angle angle1,
FT_Angle angle2 )
{
return angle1 + FT_Angle_Diff( angle1, angle2 ) / 2;
}
static FT_Bool
ft_cubic_is_small_enough( FT_Vector* base,
FT_Angle *angle_in,
FT_Angle *angle_mid,
FT_Angle *angle_out )
{
FT_Vector d1, d2, d3;
FT_Angle theta1, theta2;
FT_Int close1, close2, close3;
d1.x = base[2].x - base[3].x;
d1.y = base[2].y - base[3].y;
d2.x = base[1].x - base[2].x;
d2.y = base[1].y - base[2].y;
d3.x = base[0].x - base[1].x;
d3.y = base[0].y - base[1].y;
close1 = FT_IS_SMALL( d1.x ) && FT_IS_SMALL( d1.y );
close2 = FT_IS_SMALL( d2.x ) && FT_IS_SMALL( d2.y );
close3 = FT_IS_SMALL( d3.x ) && FT_IS_SMALL( d3.y );
if ( close1 )
{
if ( close2 )
{
if ( close3 )
{
/* basically a point; */
/* do nothing to retain original direction */
}
/* !close3 */
else
{
*angle_in =
*angle_mid =
*angle_out = FT_Atan2( d3.x, d3.y );
}
}
/* !close2 */
else
{
if ( close3 )
{
*angle_in =
*angle_mid =
*angle_out = FT_Atan2( d2.x, d2.y );
}
/* !close3 */
else
{
*angle_in =
*angle_mid = FT_Atan2( d2.x, d2.y );
*angle_out = FT_Atan2( d3.x, d3.y );
}
}
}
/* !close1 */
else
{
if ( close2 )
{
if ( close3 )
{
*angle_in =
*angle_mid =
*angle_out = FT_Atan2( d1.x, d1.y );
}
/* !close3 */
else
{
*angle_in = FT_Atan2( d1.x, d1.y );
*angle_out = FT_Atan2( d3.x, d3.y );
*angle_mid = ft_angle_mean( *angle_in, *angle_out );
}
}
/* !close2 */
else
{
if ( close3 )
{
*angle_in = FT_Atan2( d1.x, d1.y );
*angle_mid =
*angle_out = FT_Atan2( d2.x, d2.y );
}
/* !close3 */
else
{
*angle_in = FT_Atan2( d1.x, d1.y );
*angle_mid = FT_Atan2( d2.x, d2.y );
*angle_out = FT_Atan2( d3.x, d3.y );
}
}
}
theta1 = ft_pos_abs( FT_Angle_Diff( *angle_in, *angle_mid ) );
theta2 = ft_pos_abs( FT_Angle_Diff( *angle_mid, *angle_out ) );
return FT_BOOL( theta1 < FT_SMALL_CUBIC_THRESHOLD &&
theta2 < FT_SMALL_CUBIC_THRESHOLD );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** STROKE BORDERS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef enum FT_StrokeTags_
{
/* on-curve point */
FT_STROKE_TAG_ON = 1,
/* cubic off-point */
FT_STROKE_TAG_CUBIC = 2,
/* sub-path start */
FT_STROKE_TAG_BEGIN = 4,
/* sub-path end */
FT_STROKE_TAG_END = 8
} FT_StrokeTags;
#define FT_STROKE_TAG_BEGIN_END ( FT_STROKE_TAG_BEGIN | FT_STROKE_TAG_END )
typedef struct FT_StrokeBorderRec_
{
FT_UInt num_points;
FT_UInt max_points;
FT_Vector* points;
FT_Byte* tags;
/* TRUE for ends of lineto borders */
FT_Bool movable;
/* index of current sub-path start point */
FT_Int start;
FT_Memory memory;
FT_Bool valid;
} FT_StrokeBorderRec, *FT_StrokeBorder;
static FT_Error
ft_stroke_border_grow( FT_StrokeBorder border,
FT_UInt new_points )
{
FT_UInt old_max = border->max_points;
FT_UInt new_max = border->num_points + new_points;
FT_Error error = FT_Err_Ok;
if ( new_max > old_max )
{
FT_UInt cur_max = old_max;
FT_Memory memory = border->memory;
while ( cur_max < new_max )
cur_max += ( cur_max >> 1 ) + 16;
if ( FT_RENEW_ARRAY( border->points, old_max, cur_max ) ||
FT_RENEW_ARRAY( border->tags, old_max, cur_max ) )
goto Exit;
border->max_points = cur_max;
}
Exit:
return error;
}
static void
ft_stroke_border_close( FT_StrokeBorder border,
FT_Bool reverse )
{
FT_UInt start = border->start;
FT_UInt count = border->num_points;
FT_ASSERT( border->start >= 0 );
/* don't record empty paths! */
if ( count <= start + 1U )
border->num_points = start;
else
{
/* copy the last point to the start of this sub-path, since */
/* it contains the `adjusted' starting coordinates */
border->num_points = --count;
border->points[start] = border->points[count];
if ( reverse )
{
/* reverse the points */
{
FT_Vector* vec1 = border->points + start + 1;
FT_Vector* vec2 = border->points + count - 1;
for ( ; vec1 < vec2; vec1++, vec2-- )
{
FT_Vector tmp;
tmp = *vec1;
*vec1 = *vec2;
*vec2 = tmp;
}
}
/* then the tags */
{
FT_Byte* tag1 = border->tags + start + 1;
FT_Byte* tag2 = border->tags + count - 1;
for ( ; tag1 < tag2; tag1++, tag2-- )
{
FT_Byte tmp;
tmp = *tag1;
*tag1 = *tag2;
*tag2 = tmp;
}
}
}
border->tags[start ] |= FT_STROKE_TAG_BEGIN;
border->tags[count - 1] |= FT_STROKE_TAG_END;
}
border->start = -1;
border->movable = FALSE;
}
static FT_Error
ft_stroke_border_lineto( FT_StrokeBorder border,
FT_Vector* to,
FT_Bool movable )
{
FT_Error error = FT_Err_Ok;
FT_ASSERT( border->start >= 0 );
if ( border->movable )
{
/* move last point */
border->points[border->num_points - 1] = *to;
}
else
{
/* don't add zero-length lineto */
if ( border->num_points > 0 &&
FT_IS_SMALL( border->points[border->num_points - 1].x - to->x ) &&
FT_IS_SMALL( border->points[border->num_points - 1].y - to->y ) )
return error;
/* add one point */
error = ft_stroke_border_grow( border, 1 );
if ( !error )
{
FT_Vector* vec = border->points + border->num_points;
FT_Byte* tag = border->tags + border->num_points;
vec[0] = *to;
tag[0] = FT_STROKE_TAG_ON;
border->num_points += 1;
}
}
border->movable = movable;
return error;
}
static FT_Error
ft_stroke_border_conicto( FT_StrokeBorder border,
FT_Vector* control,
FT_Vector* to )
{
FT_Error error;
FT_ASSERT( border->start >= 0 );
error = ft_stroke_border_grow( border, 2 );
if ( !error )
{
FT_Vector* vec = border->points + border->num_points;
FT_Byte* tag = border->tags + border->num_points;
vec[0] = *control;
vec[1] = *to;
tag[0] = 0;
tag[1] = FT_STROKE_TAG_ON;
border->num_points += 2;
}
border->movable = FALSE;
return error;
}
static FT_Error
ft_stroke_border_cubicto( FT_StrokeBorder border,
FT_Vector* control1,
FT_Vector* control2,
FT_Vector* to )
{
FT_Error error;
FT_ASSERT( border->start >= 0 );
error = ft_stroke_border_grow( border, 3 );
if ( !error )
{
FT_Vector* vec = border->points + border->num_points;
FT_Byte* tag = border->tags + border->num_points;
vec[0] = *control1;
vec[1] = *control2;
vec[2] = *to;
tag[0] = FT_STROKE_TAG_CUBIC;
tag[1] = FT_STROKE_TAG_CUBIC;
tag[2] = FT_STROKE_TAG_ON;
border->num_points += 3;
}
border->movable = FALSE;
return error;
}
#define FT_ARC_CUBIC_ANGLE ( FT_ANGLE_PI / 2 )
static FT_Error
ft_stroke_border_arcto( FT_StrokeBorder border,
FT_Vector* center,
FT_Fixed radius,
FT_Angle angle_start,
FT_Angle angle_diff )
{
FT_Angle total, angle, step, rotate, next, theta;
FT_Vector a, b, a2, b2;
FT_Fixed length;
FT_Error error = FT_Err_Ok;
/* compute start point */
FT_Vector_From_Polar( &a, radius, angle_start );
a.x += center->x;
a.y += center->y;
total = angle_diff;
angle = angle_start;
rotate = ( angle_diff >= 0 ) ? FT_ANGLE_PI2 : -FT_ANGLE_PI2;
while ( total != 0 )
{
step = total;
if ( step > FT_ARC_CUBIC_ANGLE )
step = FT_ARC_CUBIC_ANGLE;
else if ( step < -FT_ARC_CUBIC_ANGLE )
step = -FT_ARC_CUBIC_ANGLE;
next = angle + step;
theta = step;
if ( theta < 0 )
theta = -theta;
theta >>= 1;
/* compute end point */
FT_Vector_From_Polar( &b, radius, next );
b.x += center->x;
b.y += center->y;
/* compute first and second control points */
length = FT_MulDiv( radius, FT_Sin( theta ) * 4,
( 0x10000L + FT_Cos( theta ) ) * 3 );
FT_Vector_From_Polar( &a2, length, angle + rotate );
a2.x += a.x;
a2.y += a.y;
FT_Vector_From_Polar( &b2, length, next - rotate );
b2.x += b.x;
b2.y += b.y;
/* add cubic arc */
error = ft_stroke_border_cubicto( border, &a2, &b2, &b );
if ( error )
break;
/* process the rest of the arc ?? */
a = b;
total -= step;
angle = next;
}
return error;
}
static FT_Error
ft_stroke_border_moveto( FT_StrokeBorder border,
FT_Vector* to )
{
/* close current open path if any ? */
if ( border->start >= 0 )
ft_stroke_border_close( border, FALSE );
border->start = border->num_points;
border->movable = FALSE;
return ft_stroke_border_lineto( border, to, FALSE );
}
static void
ft_stroke_border_init( FT_StrokeBorder border,
FT_Memory memory )
{
border->memory = memory;
border->points = NULL;
border->tags = NULL;
border->num_points = 0;
border->max_points = 0;
border->start = -1;
border->valid = FALSE;
}
static void
ft_stroke_border_reset( FT_StrokeBorder border )
{
border->num_points = 0;
border->start = -1;
border->valid = FALSE;
}
static void
ft_stroke_border_done( FT_StrokeBorder border )
{
FT_Memory memory = border->memory;
FT_FREE( border->points );
FT_FREE( border->tags );
border->num_points = 0;
border->max_points = 0;
border->start = -1;
border->valid = FALSE;
}
static FT_Error
ft_stroke_border_get_counts( FT_StrokeBorder border,
FT_UInt *anum_points,
FT_UInt *anum_contours )
{
FT_Error error = FT_Err_Ok;
FT_UInt num_points = 0;
FT_UInt num_contours = 0;
FT_UInt count = border->num_points;
FT_Vector* point = border->points;
FT_Byte* tags = border->tags;
FT_Int in_contour = 0;
for ( ; count > 0; count--, num_points++, point++, tags++ )
{
if ( tags[0] & FT_STROKE_TAG_BEGIN )
{
if ( in_contour != 0 )
goto Fail;
in_contour = 1;
}
else if ( in_contour == 0 )
goto Fail;
if ( tags[0] & FT_STROKE_TAG_END )
{
in_contour = 0;
num_contours++;
}
}
if ( in_contour != 0 )
goto Fail;
border->valid = TRUE;
Exit:
*anum_points = num_points;
*anum_contours = num_contours;
return error;
Fail:
num_points = 0;
num_contours = 0;
goto Exit;
}
static void
ft_stroke_border_export( FT_StrokeBorder border,
FT_Outline* outline )
{
/* copy point locations */
FT_ARRAY_COPY( outline->points + outline->n_points,
border->points,
border->num_points );
/* copy tags */
{
FT_UInt count = border->num_points;
FT_Byte* read = border->tags;
FT_Byte* write = (FT_Byte*)outline->tags + outline->n_points;
for ( ; count > 0; count--, read++, write++ )
{
if ( *read & FT_STROKE_TAG_ON )
*write = FT_CURVE_TAG_ON;
else if ( *read & FT_STROKE_TAG_CUBIC )
*write = FT_CURVE_TAG_CUBIC;
else
*write = FT_CURVE_TAG_CONIC;
}
}
/* copy contours */
{
FT_UInt count = border->num_points;
FT_Byte* tags = border->tags;
FT_Short* write = outline->contours + outline->n_contours;
FT_Short idx = (FT_Short)outline->n_points;
for ( ; count > 0; count--, tags++, idx++ )
{
if ( *tags & FT_STROKE_TAG_END )
{
*write++ = idx;
outline->n_contours++;
}
}
}
outline->n_points = (short)( outline->n_points + border->num_points );
FT_ASSERT( FT_Outline_Check( outline ) == 0 );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** STROKER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
#define FT_SIDE_TO_ROTATE( s ) ( FT_ANGLE_PI2 - (s) * FT_ANGLE_PI )
typedef struct FT_StrokerRec_
{
/* direction into curr join */
FT_Angle angle_in;
/* direction out of join */
FT_Angle angle_out;
/* current position */
FT_Vector center;
/* length of last lineto */
FT_Fixed line_length;
/* is this the start? */
FT_Bool first_point;
/* is the subpath open? */
FT_Bool subpath_open;
/* subpath start direction */
FT_Angle subpath_angle;
/* subpath start position */
FT_Vector subpath_start;
/* subpath start lineto len */
FT_Fixed subpath_line_length;
/* use wide strokes logic? */
FT_Bool handle_wide_strokes;
FT_Stroker_LineCap line_cap;
FT_Stroker_LineJoin line_join;
FT_Stroker_LineJoin line_join_saved;
FT_Fixed miter_limit;
FT_Fixed radius;
FT_StrokeBorderRec borders[2];
FT_Library library;
} FT_StrokerRec;
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_Error )
FT_Stroker_New( FT_Library library,
FT_Stroker *astroker )
{
/* assigned in FT_NEW */
FT_Error error;
FT_Memory memory;
FT_Stroker stroker = NULL;
if ( !library )
return FT_Err_Invalid_Argument;
memory = library->memory;
if ( !FT_NEW( stroker ) )
{
stroker->library = library;
ft_stroke_border_init( &stroker->borders[0], memory );
ft_stroke_border_init( &stroker->borders[1], memory );
}
*astroker = stroker;
return error;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( void )
FT_Stroker_Set( FT_Stroker stroker,
FT_Fixed radius,
FT_Stroker_LineCap line_cap,
FT_Stroker_LineJoin line_join,
FT_Fixed miter_limit )
{
stroker->radius = radius;
stroker->line_cap = line_cap;
stroker->line_join = line_join;
stroker->miter_limit = miter_limit;
/* ensure miter limit has sensible value */
if ( stroker->miter_limit < 0x10000 )
stroker->miter_limit = 0x10000;
/* save line join style: */
/* line join style can be temporarily changed when stroking curves */
stroker->line_join_saved = line_join;
FT_Stroker_Rewind( stroker );
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( void )
FT_Stroker_Rewind( FT_Stroker stroker )
{
if ( stroker )
{
ft_stroke_border_reset( &stroker->borders[0] );
ft_stroke_border_reset( &stroker->borders[1] );
}
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( void )
FT_Stroker_Done( FT_Stroker stroker )
{
if ( stroker )
{
FT_Memory memory = stroker->library->memory;
ft_stroke_border_done( &stroker->borders[0] );
ft_stroke_border_done( &stroker->borders[1] );
stroker->library = NULL;
FT_FREE( stroker );
}
}
/* create a circular arc at a corner or cap */
static FT_Error
ft_stroker_arcto( FT_Stroker stroker,
FT_Int side )
{
FT_Angle total, rotate;
FT_Fixed radius = stroker->radius;
FT_Error error = FT_Err_Ok;
FT_StrokeBorder border = stroker->borders + side;
rotate = FT_SIDE_TO_ROTATE( side );
total = FT_Angle_Diff( stroker->angle_in, stroker->angle_out );
if ( total == FT_ANGLE_PI )
total = -rotate * 2;
error = ft_stroke_border_arcto( border,
&stroker->center,
radius,
stroker->angle_in + rotate,
total );
border->movable = FALSE;
return error;
}
/* add a cap at the end of an opened path */
static FT_Error
ft_stroker_cap( FT_Stroker stroker,
FT_Angle angle,
FT_Int side )
{
FT_Error error = FT_Err_Ok;
if ( stroker->line_cap == FT_STROKER_LINECAP_ROUND )
{
/* add a round cap */
stroker->angle_in = angle;
stroker->angle_out = angle + FT_ANGLE_PI;
error = ft_stroker_arcto( stroker, side );
}
else if ( stroker->line_cap == FT_STROKER_LINECAP_SQUARE )
{
/* add a square cap */
FT_Vector delta, delta2;
FT_Angle rotate = FT_SIDE_TO_ROTATE( side );
FT_Fixed radius = stroker->radius;
FT_StrokeBorder border = stroker->borders + side;
FT_Vector_From_Polar( &delta2, radius, angle + rotate );
FT_Vector_From_Polar( &delta, radius, angle );
delta.x += stroker->center.x + delta2.x;
delta.y += stroker->center.y + delta2.y;
error = ft_stroke_border_lineto( border, &delta, FALSE );
if ( error )
goto Exit;
FT_Vector_From_Polar( &delta2, radius, angle - rotate );
FT_Vector_From_Polar( &delta, radius, angle );
delta.x += delta2.x + stroker->center.x;
delta.y += delta2.y + stroker->center.y;
error = ft_stroke_border_lineto( border, &delta, FALSE );
}
else if ( stroker->line_cap == FT_STROKER_LINECAP_BUTT )
{
/* add a butt ending */
FT_Vector delta;
FT_Angle rotate = FT_SIDE_TO_ROTATE( side );
FT_Fixed radius = stroker->radius;
FT_StrokeBorder border = stroker->borders + side;
FT_Vector_From_Polar( &delta, radius, angle + rotate );
delta.x += stroker->center.x;
delta.y += stroker->center.y;
error = ft_stroke_border_lineto( border, &delta, FALSE );
if ( error )
goto Exit;
FT_Vector_From_Polar( &delta, radius, angle - rotate );
delta.x += stroker->center.x;
delta.y += stroker->center.y;
error = ft_stroke_border_lineto( border, &delta, FALSE );
}
Exit:
return error;
}
/* process an inside corner, i.e. compute intersection */
static FT_Error
ft_stroker_inside( FT_Stroker stroker,
FT_Int side,
FT_Fixed line_length )
{
FT_StrokeBorder border = stroker->borders + side;
FT_Angle phi, theta, rotate;
FT_Fixed length, thcos;
FT_Vector delta;
FT_Error error = FT_Err_Ok;
/* use intersection of lines? */
FT_Bool intersect;
rotate = FT_SIDE_TO_ROTATE( side );
theta = FT_Angle_Diff( stroker->angle_in, stroker->angle_out ) / 2;
/* Only intersect borders if between two lineto's and both */
/* lines are long enough (line_length is zero for curves). */
if ( !border->movable || line_length == 0 )
intersect = FALSE;
else
{
/* compute minimum required length of lines */
FT_Fixed min_length = ft_pos_abs( FT_MulFix( stroker->radius,
FT_Tan( theta ) ) );
intersect = FT_BOOL( stroker->line_length >= min_length &&
line_length >= min_length );
}
if ( !intersect )
{
FT_Vector_From_Polar( &delta, stroker->radius,
stroker->angle_out + rotate );
delta.x += stroker->center.x;
delta.y += stroker->center.y;
border->movable = FALSE;
}
else
{
/* compute median angle */
phi = stroker->angle_in + theta;
thcos = FT_Cos( theta );
length = FT_DivFix( stroker->radius, thcos );
FT_Vector_From_Polar( &delta, length, phi + rotate );
delta.x += stroker->center.x;
delta.y += stroker->center.y;
}
error = ft_stroke_border_lineto( border, &delta, FALSE );
return error;
}
/* process an outside corner, i.e. compute bevel/miter/round */
static FT_Error
ft_stroker_outside( FT_Stroker stroker,
FT_Int side,
FT_Fixed line_length )
{
FT_StrokeBorder border = stroker->borders + side;
FT_Error error;
FT_Angle rotate;
if ( stroker->line_join == FT_STROKER_LINEJOIN_ROUND )
error = ft_stroker_arcto( stroker, side );
else
{
/* this is a mitered (pointed) or beveled (truncated) corner */
FT_Fixed sigma = 0, radius = stroker->radius;
FT_Angle theta = 0, phi = 0;
FT_Fixed thcos = 0;
FT_Bool bevel, fixed_bevel;
rotate = FT_SIDE_TO_ROTATE( side );
bevel =
FT_BOOL( stroker->line_join == FT_STROKER_LINEJOIN_BEVEL );
fixed_bevel =
FT_BOOL( stroker->line_join != FT_STROKER_LINEJOIN_MITER_VARIABLE );
if ( !bevel )
{
theta = FT_Angle_Diff( stroker->angle_in, stroker->angle_out );
if ( theta == FT_ANGLE_PI )
{
theta = rotate;
phi = stroker->angle_in;
}
else
{
theta /= 2;
phi = stroker->angle_in + theta + rotate;
}
thcos = FT_Cos( theta );
sigma = FT_MulFix( stroker->miter_limit, thcos );
/* is miter limit exceeded? */
if ( sigma < 0x10000L )
{
/* don't create variable bevels for very small deviations; */
/* FT_Sin(x) = 0 for x <= 57 */
if ( fixed_bevel || ft_pos_abs( theta ) > 57 )
bevel = TRUE;
}
}
/* this is a bevel (broken angle) */
if ( bevel )
{
if ( fixed_bevel )
{
/* the outer corners are simply joined together */
FT_Vector delta;
/* add bevel */
FT_Vector_From_Polar( &delta,
radius,
stroker->angle_out + rotate );
delta.x += stroker->center.x;
delta.y += stroker->center.y;
border->movable = FALSE;
error = ft_stroke_border_lineto( border, &delta, FALSE );
}
/* variable bevel */
else
{
/* the miter is truncated */
FT_Vector middle, delta;
FT_Fixed length;
/* compute middle point */
FT_Vector_From_Polar( &middle,
FT_MulFix( radius, stroker->miter_limit ),
phi );
middle.x += stroker->center.x;
middle.y += stroker->center.y;
/* compute first angle point */
length = FT_MulDiv( radius, 0x10000L - sigma,
ft_pos_abs( FT_Sin( theta ) ) );
FT_Vector_From_Polar( &delta, length, phi + rotate );
delta.x += middle.x;
delta.y += middle.y;
error = ft_stroke_border_lineto( border, &delta, FALSE );
if ( error )
goto Exit;
/* compute second angle point */
FT_Vector_From_Polar( &delta, length, phi - rotate );
delta.x += middle.x;
delta.y += middle.y;
error = ft_stroke_border_lineto( border, &delta, FALSE );
if ( error )
goto Exit;
/* finally, add an end point; only needed if not lineto */
/* (line_length is zero for curves) */
if ( line_length == 0 )
{
FT_Vector_From_Polar( &delta,
radius,
stroker->angle_out + rotate );
delta.x += stroker->center.x;
delta.y += stroker->center.y;
error = ft_stroke_border_lineto( border, &delta, FALSE );
}
}
}
/* this is a miter (intersection) */
else
{
FT_Fixed length;
FT_Vector delta;
length = FT_DivFix( stroker->radius, thcos );
FT_Vector_From_Polar( &delta, length, phi );
delta.x += stroker->center.x;
delta.y += stroker->center.y;
error = ft_stroke_border_lineto( border, &delta, FALSE );
if ( error )
goto Exit;
/* now add an end point; only needed if not lineto */
/* (line_length is zero for curves) */
if ( line_length == 0 )
{
FT_Vector_From_Polar( &delta,
stroker->radius,
stroker->angle_out + rotate );
delta.x += stroker->center.x;
delta.y += stroker->center.y;
error = ft_stroke_border_lineto( border, &delta, FALSE );
}
}
}
Exit:
return error;
}
static FT_Error
ft_stroker_process_corner( FT_Stroker stroker,
FT_Fixed line_length )
{
FT_Error error = FT_Err_Ok;
FT_Angle turn;
FT_Int inside_side;
turn = FT_Angle_Diff( stroker->angle_in, stroker->angle_out );
/* no specific corner processing is required if the turn is 0 */
if ( turn == 0 )
goto Exit;
/* when we turn to the right, the inside side is 0 */
inside_side = 0;
/* otherwise, the inside side is 1 */
if ( turn < 0 )
inside_side = 1;
/* process the inside side */
error = ft_stroker_inside( stroker, inside_side, line_length );
if ( error )
goto Exit;
/* process the outside side */
error = ft_stroker_outside( stroker, 1 - inside_side, line_length );
Exit:
return error;
}
/* add two points to the left and right borders corresponding to the */
/* start of the subpath */
static FT_Error
ft_stroker_subpath_start( FT_Stroker stroker,
FT_Angle start_angle,
FT_Fixed line_length )
{
FT_Vector delta;
FT_Vector point;
FT_Error error;
FT_StrokeBorder border;
FT_Vector_From_Polar( &delta, stroker->radius,
start_angle + FT_ANGLE_PI2 );
point.x = stroker->center.x + delta.x;
point.y = stroker->center.y + delta.y;
border = stroker->borders;
error = ft_stroke_border_moveto( border, &point );
if ( error )
goto Exit;
point.x = stroker->center.x - delta.x;
point.y = stroker->center.y - delta.y;
border++;
error = ft_stroke_border_moveto( border, &point );
/* save angle, position, and line length for last join */
/* (line_length is zero for curves) */
stroker->subpath_angle = start_angle;
stroker->first_point = FALSE;
stroker->subpath_line_length = line_length;
Exit:
return error;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_Error )
FT_Stroker_LineTo( FT_Stroker stroker,
FT_Vector* to )
{
FT_Error error = FT_Err_Ok;
FT_StrokeBorder border;
FT_Vector delta;
FT_Angle angle;
FT_Int side;
FT_Fixed line_length;
delta.x = to->x - stroker->center.x;
delta.y = to->y - stroker->center.y;
/* a zero-length lineto is a no-op; avoid creating a spurious corner */
if ( delta.x == 0 && delta.y == 0 )
goto Exit;
/* compute length of line */
line_length = FT_Vector_Length( &delta );
angle = FT_Atan2( delta.x, delta.y );
FT_Vector_From_Polar( &delta, stroker->radius, angle + FT_ANGLE_PI2 );
/* process corner if necessary */
if ( stroker->first_point )
{
/* This is the first segment of a subpath. We need to */
/* add a point to each border at their respective starting */
/* point locations. */
error = ft_stroker_subpath_start( stroker, angle, line_length );
if ( error )
goto Exit;
}
else
{
/* process the current corner */
stroker->angle_out = angle;
error = ft_stroker_process_corner( stroker, line_length );
if ( error )
goto Exit;
}
/* now add a line segment to both the `inside' and `outside' paths */
for ( border = stroker->borders, side = 1; side >= 0; side--, border++ )
{
FT_Vector point;
point.x = to->x + delta.x;
point.y = to->y + delta.y;
/* the ends of lineto borders are movable */
error = ft_stroke_border_lineto( border, &point, TRUE );
if ( error )
goto Exit;
delta.x = -delta.x;
delta.y = -delta.y;
}
stroker->angle_in = angle;
stroker->center = *to;
stroker->line_length = line_length;
Exit:
return error;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_Error )
FT_Stroker_ConicTo( FT_Stroker stroker,
FT_Vector* control,
FT_Vector* to )
{
FT_Error error = FT_Err_Ok;
FT_Vector bez_stack[34];
FT_Vector* arc;
FT_Vector* limit = bez_stack + 30;
FT_Bool first_arc = TRUE;
/* if all control points are coincident, this is a no-op; */
/* avoid creating a spurious corner */
if ( FT_IS_SMALL( stroker->center.x - control->x ) &&
FT_IS_SMALL( stroker->center.y - control->y ) &&
FT_IS_SMALL( control->x - to->x ) &&
FT_IS_SMALL( control->y - to->y ) )
{
stroker->center = *to;
goto Exit;
}
arc = bez_stack;
arc[0] = *to;
arc[1] = *control;
arc[2] = stroker->center;
while ( arc >= bez_stack )
{
FT_Angle angle_in, angle_out;
/* initialize with current direction */
angle_in = angle_out = stroker->angle_in;
if ( arc < limit &&
!ft_conic_is_small_enough( arc, &angle_in, &angle_out ) )
{
if ( stroker->first_point )
stroker->angle_in = angle_in;
ft_conic_split( arc );
arc += 2;
continue;
}
if ( first_arc )
{
first_arc = FALSE;
/* process corner if necessary */
if ( stroker->first_point )
error = ft_stroker_subpath_start( stroker, angle_in, 0 );
else
{
stroker->angle_out = angle_in;
error = ft_stroker_process_corner( stroker, 0 );
}
}
else if ( ft_pos_abs( FT_Angle_Diff( stroker->angle_in, angle_in ) ) >
FT_SMALL_CONIC_THRESHOLD / 4 )
{
/* if the deviation from one arc to the next is too great, */
/* add a round corner */
stroker->center = arc[2];
stroker->angle_out = angle_in;
stroker->line_join = FT_STROKER_LINEJOIN_ROUND;
error = ft_stroker_process_corner( stroker, 0 );
/* reinstate line join style */
stroker->line_join = stroker->line_join_saved;
}
if ( error )
goto Exit;
/* the arc's angle is small enough; we can add it directly to each */
/* border */
{
FT_Vector ctrl, end;
FT_Angle theta, phi, rotate, alpha0 = 0;
FT_Fixed length;
FT_StrokeBorder border;
FT_Int side;
theta = FT_Angle_Diff( angle_in, angle_out ) / 2;
phi = angle_in + theta;
length = FT_DivFix( stroker->radius, FT_Cos( theta ) );
/* compute direction of original arc */
if ( stroker->handle_wide_strokes )
alpha0 = FT_Atan2( arc[0].x - arc[2].x, arc[0].y - arc[2].y );
for ( border = stroker->borders, side = 0;
side <= 1;
side++, border++ )
{
rotate = FT_SIDE_TO_ROTATE( side );
/* compute control point */
FT_Vector_From_Polar( &ctrl, length, phi + rotate );
ctrl.x += arc[1].x;
ctrl.y += arc[1].y;
/* compute end point */
FT_Vector_From_Polar( &end, stroker->radius, angle_out + rotate );
end.x += arc[0].x;
end.y += arc[0].y;
if ( stroker->handle_wide_strokes )
{
FT_Vector start;
FT_Angle alpha1;
/* determine whether the border radius is greater than the */
/* radius of curvature of the original arc */
start = border->points[border->num_points - 1];
alpha1 = FT_Atan2( end.x - start.x, end.y - start.y );
/* is the direction of the border arc opposite to */
/* that of the original arc? */
if ( ft_pos_abs( FT_Angle_Diff( alpha0, alpha1 ) ) >
FT_ANGLE_PI / 2 )
{
FT_Angle beta, gamma;
FT_Vector bvec, delta;
FT_Fixed blen, sinA, sinB, alen;
/* use the sine rule to find the intersection point */
beta = FT_Atan2( arc[2].x - start.x, arc[2].y - start.y );
gamma = FT_Atan2( arc[0].x - end.x, arc[0].y - end.y );
bvec.x = end.x - start.x;
bvec.y = end.y - start.y;
blen = FT_Vector_Length( &bvec );
sinA = ft_pos_abs( FT_Sin( alpha1 - gamma ) );
sinB = ft_pos_abs( FT_Sin( beta - gamma ) );
alen = FT_MulDiv( blen, sinA, sinB );
FT_Vector_From_Polar( &delta, alen, beta );
delta.x += start.x;
delta.y += start.y;
/* circumnavigate the negative sector backwards */
border->movable = FALSE;
error = ft_stroke_border_lineto( border, &delta, FALSE );
if ( error )
goto Exit;
error = ft_stroke_border_lineto( border, &end, FALSE );
if ( error )
goto Exit;
error = ft_stroke_border_conicto( border, &ctrl, &start );
if ( error )
goto Exit;
/* and then move to the endpoint */
error = ft_stroke_border_lineto( border, &end, FALSE );
if ( error )
goto Exit;
continue;
}
/* else fall through */
}
/* simply add an arc */
error = ft_stroke_border_conicto( border, &ctrl, &end );
if ( error )
goto Exit;
}
}
arc -= 2;
stroker->angle_in = angle_out;
}
stroker->center = *to;
Exit:
return error;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_Error )
FT_Stroker_CubicTo( FT_Stroker stroker,
FT_Vector* control1,
FT_Vector* control2,
FT_Vector* to )
{
FT_Error error = FT_Err_Ok;
FT_Vector bez_stack[37];
FT_Vector* arc;
FT_Vector* limit = bez_stack + 32;
FT_Bool first_arc = TRUE;
/* if all control points are coincident, this is a no-op; */
/* avoid creating a spurious corner */
if ( FT_IS_SMALL( stroker->center.x - control1->x ) &&
FT_IS_SMALL( stroker->center.y - control1->y ) &&
FT_IS_SMALL( control1->x - control2->x ) &&
FT_IS_SMALL( control1->y - control2->y ) &&
FT_IS_SMALL( control2->x - to->x ) &&
FT_IS_SMALL( control2->y - to->y ) )
{
stroker->center = *to;
goto Exit;
}
arc = bez_stack;
arc[0] = *to;
arc[1] = *control2;
arc[2] = *control1;
arc[3] = stroker->center;
while ( arc >= bez_stack )
{
FT_Angle angle_in, angle_mid, angle_out;
/* initialize with current direction */
angle_in = angle_out = angle_mid = stroker->angle_in;
if ( arc < limit &&
!ft_cubic_is_small_enough( arc, &angle_in,
&angle_mid, &angle_out ) )
{
if ( stroker->first_point )
stroker->angle_in = angle_in;
ft_cubic_split( arc );
arc += 3;
continue;
}
if ( first_arc )
{
first_arc = FALSE;
/* process corner if necessary */
if ( stroker->first_point )
error = ft_stroker_subpath_start( stroker, angle_in, 0 );
else
{
stroker->angle_out = angle_in;
error = ft_stroker_process_corner( stroker, 0 );
}
}
else if ( ft_pos_abs( FT_Angle_Diff( stroker->angle_in, angle_in ) ) >
FT_SMALL_CUBIC_THRESHOLD / 4 )
{
/* if the deviation from one arc to the next is too great, */
/* add a round corner */
stroker->center = arc[3];
stroker->angle_out = angle_in;
stroker->line_join = FT_STROKER_LINEJOIN_ROUND;
error = ft_stroker_process_corner( stroker, 0 );
/* reinstate line join style */
stroker->line_join = stroker->line_join_saved;
}
if ( error )
goto Exit;
/* the arc's angle is small enough; we can add it directly to each */
/* border */
{
FT_Vector ctrl1, ctrl2, end;
FT_Angle theta1, phi1, theta2, phi2, rotate, alpha0 = 0;
FT_Fixed length1, length2;
FT_StrokeBorder border;
FT_Int side;
theta1 = FT_Angle_Diff( angle_in, angle_mid ) / 2;
theta2 = FT_Angle_Diff( angle_mid, angle_out ) / 2;
phi1 = ft_angle_mean( angle_in, angle_mid );
phi2 = ft_angle_mean( angle_mid, angle_out );
length1 = FT_DivFix( stroker->radius, FT_Cos( theta1 ) );
length2 = FT_DivFix( stroker->radius, FT_Cos( theta2 ) );
/* compute direction of original arc */
if ( stroker->handle_wide_strokes )
alpha0 = FT_Atan2( arc[0].x - arc[3].x, arc[0].y - arc[3].y );
for ( border = stroker->borders, side = 0;
side <= 1;
side++, border++ )
{
rotate = FT_SIDE_TO_ROTATE( side );
/* compute control points */
FT_Vector_From_Polar( &ctrl1, length1, phi1 + rotate );
ctrl1.x += arc[2].x;
ctrl1.y += arc[2].y;
FT_Vector_From_Polar( &ctrl2, length2, phi2 + rotate );
ctrl2.x += arc[1].x;
ctrl2.y += arc[1].y;
/* compute end point */
FT_Vector_From_Polar( &end, stroker->radius, angle_out + rotate );
end.x += arc[0].x;
end.y += arc[0].y;
if ( stroker->handle_wide_strokes )
{
FT_Vector start;
FT_Angle alpha1;
/* determine whether the border radius is greater than the */
/* radius of curvature of the original arc */
start = border->points[border->num_points - 1];
alpha1 = FT_Atan2( end.x - start.x, end.y - start.y );
/* is the direction of the border arc opposite to */
/* that of the original arc? */
if ( ft_pos_abs( FT_Angle_Diff( alpha0, alpha1 ) ) >
FT_ANGLE_PI / 2 )
{
FT_Angle beta, gamma;
FT_Vector bvec, delta;
FT_Fixed blen, sinA, sinB, alen;
/* use the sine rule to find the intersection point */
beta = FT_Atan2( arc[3].x - start.x, arc[3].y - start.y );
gamma = FT_Atan2( arc[0].x - end.x, arc[0].y - end.y );
bvec.x = end.x - start.x;
bvec.y = end.y - start.y;
blen = FT_Vector_Length( &bvec );
sinA = ft_pos_abs( FT_Sin( alpha1 - gamma ) );
sinB = ft_pos_abs( FT_Sin( beta - gamma ) );
alen = FT_MulDiv( blen, sinA, sinB );
FT_Vector_From_Polar( &delta, alen, beta );
delta.x += start.x;
delta.y += start.y;
/* circumnavigate the negative sector backwards */
border->movable = FALSE;
error = ft_stroke_border_lineto( border, &delta, FALSE );
if ( error )
goto Exit;
error = ft_stroke_border_lineto( border, &end, FALSE );
if ( error )
goto Exit;
error = ft_stroke_border_cubicto( border,
&ctrl2,
&ctrl1,
&start );
if ( error )
goto Exit;
/* and then move to the endpoint */
error = ft_stroke_border_lineto( border, &end, FALSE );
if ( error )
goto Exit;
continue;
}
/* else fall through */
}
/* simply add an arc */
error = ft_stroke_border_cubicto( border, &ctrl1, &ctrl2, &end );
if ( error )
goto Exit;
}
}
arc -= 3;
stroker->angle_in = angle_out;
}
stroker->center = *to;
Exit:
return error;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_Error )
FT_Stroker_BeginSubPath( FT_Stroker stroker,
FT_Vector* to,
FT_Bool open )
{
/* We cannot process the first point, because there is not enough */
/* information regarding its corner/cap. The latter will be processed */
/* in the `FT_Stroker_EndSubPath' routine. */
/* */
stroker->first_point = TRUE;
stroker->center = *to;
stroker->subpath_open = open;
/* Determine if we need to check whether the border radius is greater */
/* than the radius of curvature of a curve, to handle this case */
/* specially. This is only required if bevel joins or butt caps may */
/* be created, because round & miter joins and round & square caps */
/* cover the negative sector created with wide strokes. */
stroker->handle_wide_strokes =
FT_BOOL( stroker->line_join != FT_STROKER_LINEJOIN_ROUND ||
( stroker->subpath_open &&
stroker->line_cap == FT_STROKER_LINECAP_BUTT ) );
/* record the subpath start point for each border */
stroker->subpath_start = *to;
stroker->angle_in = 0;
return FT_Err_Ok;
}
static FT_Error
ft_stroker_add_reverse_left( FT_Stroker stroker,
FT_Bool open )
{
FT_StrokeBorder right = stroker->borders + 0;
FT_StrokeBorder left = stroker->borders + 1;
FT_Int new_points;
FT_Error error = FT_Err_Ok;
FT_ASSERT( left->start >= 0 );
new_points = left->num_points - left->start;
if ( new_points > 0 )
{
error = ft_stroke_border_grow( right, (FT_UInt)new_points );
if ( error )
goto Exit;
{
FT_Vector* dst_point = right->points + right->num_points;
FT_Byte* dst_tag = right->tags + right->num_points;
FT_Vector* src_point = left->points + left->num_points - 1;
FT_Byte* src_tag = left->tags + left->num_points - 1;
while ( src_point >= left->points + left->start )
{
*dst_point = *src_point;
*dst_tag = *src_tag;
if ( open )
dst_tag[0] &= ~FT_STROKE_TAG_BEGIN_END;
else
{
FT_Byte ttag =
(FT_Byte)( dst_tag[0] & FT_STROKE_TAG_BEGIN_END );
/* switch begin/end tags if necessary */
if ( ttag == FT_STROKE_TAG_BEGIN ||
ttag == FT_STROKE_TAG_END )
dst_tag[0] ^= FT_STROKE_TAG_BEGIN_END;
}
src_point--;
src_tag--;
dst_point++;
dst_tag++;
}
}
left->num_points = left->start;
right->num_points += new_points;
right->movable = FALSE;
left->movable = FALSE;
}
Exit:
return error;
}
/* documentation is in ftstroke.h */
/* there's a lot of magic in this function! */
FT_EXPORT_DEF( FT_Error )
FT_Stroker_EndSubPath( FT_Stroker stroker )
{
FT_Error error = FT_Err_Ok;
if ( stroker->subpath_open )
{
FT_StrokeBorder right = stroker->borders;
/* All right, this is an opened path, we need to add a cap between */
/* right & left, add the reverse of left, then add a final cap */
/* between left & right. */
error = ft_stroker_cap( stroker, stroker->angle_in, 0 );
if ( error )
goto Exit;
/* add reversed points from `left' to `right' */
error = ft_stroker_add_reverse_left( stroker, TRUE );
if ( error )
goto Exit;
/* now add the final cap */
stroker->center = stroker->subpath_start;
error = ft_stroker_cap( stroker,
stroker->subpath_angle + FT_ANGLE_PI, 0 );
if ( error )
goto Exit;
/* Now end the right subpath accordingly. The left one is */
/* rewind and doesn't need further processing. */
ft_stroke_border_close( right, FALSE );
}
else
{
FT_Angle turn;
FT_Int inside_side;
/* close the path if needed */
if ( stroker->center.x != stroker->subpath_start.x ||
stroker->center.y != stroker->subpath_start.y )
{
error = FT_Stroker_LineTo( stroker, &stroker->subpath_start );
if ( error )
goto Exit;
}
/* process the corner */
stroker->angle_out = stroker->subpath_angle;
turn = FT_Angle_Diff( stroker->angle_in,
stroker->angle_out );
/* no specific corner processing is required if the turn is 0 */
if ( turn != 0 )
{
/* when we turn to the right, the inside side is 0 */
inside_side = 0;
/* otherwise, the inside side is 1 */
if ( turn < 0 )
inside_side = 1;
error = ft_stroker_inside( stroker,
inside_side,
stroker->subpath_line_length );
if ( error )
goto Exit;
/* process the outside side */
error = ft_stroker_outside( stroker,
1 - inside_side,
stroker->subpath_line_length );
if ( error )
goto Exit;
}
/* then end our two subpaths */
ft_stroke_border_close( stroker->borders + 0, FALSE );
ft_stroke_border_close( stroker->borders + 1, TRUE );
}
Exit:
return error;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_Error )
FT_Stroker_GetBorderCounts( FT_Stroker stroker,
FT_StrokerBorder border,
FT_UInt *anum_points,
FT_UInt *anum_contours )
{
FT_UInt num_points = 0, num_contours = 0;
FT_Error error;
if ( !stroker || border > 1 )
{
error = FT_Err_Invalid_Argument;
goto Exit;
}
error = ft_stroke_border_get_counts( stroker->borders + border,
&num_points, &num_contours );
Exit:
if ( anum_points )
*anum_points = num_points;
if ( anum_contours )
*anum_contours = num_contours;
return error;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_Error )
FT_Stroker_GetCounts( FT_Stroker stroker,
FT_UInt *anum_points,
FT_UInt *anum_contours )
{
FT_UInt count1, count2, num_points = 0;
FT_UInt count3, count4, num_contours = 0;
FT_Error error;
error = ft_stroke_border_get_counts( stroker->borders + 0,
&count1, &count2 );
if ( error )
goto Exit;
error = ft_stroke_border_get_counts( stroker->borders + 1,
&count3, &count4 );
if ( error )
goto Exit;
num_points = count1 + count3;
num_contours = count2 + count4;
Exit:
*anum_points = num_points;
*anum_contours = num_contours;
return error;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( void )
FT_Stroker_ExportBorder( FT_Stroker stroker,
FT_StrokerBorder border,
FT_Outline* outline )
{
if ( border == FT_STROKER_BORDER_LEFT ||
border == FT_STROKER_BORDER_RIGHT )
{
FT_StrokeBorder sborder = & stroker->borders[border];
if ( sborder->valid )
ft_stroke_border_export( sborder, outline );
}
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( void )
FT_Stroker_Export( FT_Stroker stroker,
FT_Outline* outline )
{
FT_Stroker_ExportBorder( stroker, FT_STROKER_BORDER_LEFT, outline );
FT_Stroker_ExportBorder( stroker, FT_STROKER_BORDER_RIGHT, outline );
}
/* documentation is in ftstroke.h */
/*
* The following is very similar to FT_Outline_Decompose, except
* that we do support opened paths, and do not scale the outline.
*/
FT_EXPORT_DEF( FT_Error )
FT_Stroker_ParseOutline( FT_Stroker stroker,
FT_Outline* outline,
FT_Bool opened )
{
FT_Vector v_last;
FT_Vector v_control;
FT_Vector v_start;
FT_Vector* point;
FT_Vector* limit;
char* tags;
FT_Error error;
/* index of contour in outline */
FT_Int n;
/* index of first point in contour */
FT_UInt first;
/* current point's state */
FT_Int tag;
if ( !outline || !stroker )
return FT_Err_Invalid_Argument;
FT_Stroker_Rewind( stroker );
first = 0;
for ( n = 0; n < outline->n_contours; n++ )
{
/* index of last point in contour */
FT_UInt last;
last = outline->contours[n];
limit = outline->points + last;
/* skip empty points; we don't stroke these */
if ( last <= first )
{
first = last + 1;
continue;
}
v_start = outline->points[first];
v_last = outline->points[last];
v_control = v_start;
point = outline->points + first;
tags = outline->tags + first;
tag = FT_CURVE_TAG( tags[0] );
/* A contour cannot start with a cubic control point! */
if ( tag == FT_CURVE_TAG_CUBIC )
goto Invalid_Outline;
/* check first point to determine origin */
if ( tag == FT_CURVE_TAG_CONIC )
{
/* First point is conic control. Yes, this happens. */
if ( FT_CURVE_TAG( outline->tags[last] ) == FT_CURVE_TAG_ON )
{
/* start at last point if it is on the curve */
v_start = v_last;
limit--;
}
else
{
/* if both first and last points are conic, */
/* start at their middle */
v_start.x = ( v_start.x + v_last.x ) / 2;
v_start.y = ( v_start.y + v_last.y ) / 2;
}
point--;
tags--;
}
error = FT_Stroker_BeginSubPath( stroker, &v_start, opened );
if ( error )
goto Exit;
while ( point < limit )
{
point++;
tags++;
tag = FT_CURVE_TAG( tags[0] );
switch ( tag )
{
/* emit a single line_to */
case FT_CURVE_TAG_ON:
{
FT_Vector vec;
vec.x = point->x;
vec.y = point->y;
error = FT_Stroker_LineTo( stroker, &vec );
if ( error )
goto Exit;
continue;
}
/* consume conic arcs */
case FT_CURVE_TAG_CONIC:
v_control.x = point->x;
v_control.y = point->y;
Do_Conic:
if ( point < limit )
{
FT_Vector vec;
FT_Vector v_middle;
point++;
tags++;
tag = FT_CURVE_TAG( tags[0] );
vec = point[0];
if ( tag == FT_CURVE_TAG_ON )
{
error = FT_Stroker_ConicTo( stroker, &v_control, &vec );
if ( error )
goto Exit;
continue;
}
if ( tag != FT_CURVE_TAG_CONIC )
goto Invalid_Outline;
v_middle.x = ( v_control.x + vec.x ) / 2;
v_middle.y = ( v_control.y + vec.y ) / 2;
error = FT_Stroker_ConicTo( stroker, &v_control, &v_middle );
if ( error )
goto Exit;
v_control = vec;
goto Do_Conic;
}
error = FT_Stroker_ConicTo( stroker, &v_control, &v_start );
goto Close;
/* FT_CURVE_TAG_CUBIC */
default:
{
FT_Vector vec1, vec2;
if ( point + 1 > limit ||
FT_CURVE_TAG( tags[1] ) != FT_CURVE_TAG_CUBIC )
goto Invalid_Outline;
point += 2;
tags += 2;
vec1 = point[-2];
vec2 = point[-1];
if ( point <= limit )
{
FT_Vector vec;
vec = point[0];
error = FT_Stroker_CubicTo( stroker, &vec1, &vec2, &vec );
if ( error )
goto Exit;
continue;
}
error = FT_Stroker_CubicTo( stroker, &vec1, &vec2, &v_start );
goto Close;
}
}
}
Close:
if ( error )
goto Exit;
/* don't try to end the path if no segments have been generated */
if ( !stroker->first_point )
{
error = FT_Stroker_EndSubPath( stroker );
if ( error )
goto Exit;
}
first = last + 1;
}
return FT_Err_Ok;
Exit:
return error;
Invalid_Outline:
return FT_Err_Invalid_Outline;
}
/* declare an extern to access `ft_outline_glyph_class' globally */
/* allocated in `ftglyph.c', and use the FT_OUTLINE_GLYPH_CLASS_GET */
/* macro to access it when FT_CONFIG_OPTION_PIC is defined */
extern const FT_Glyph_Class ft_outline_glyph_class;
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_Error )
FT_Glyph_Stroke( FT_Glyph *pglyph,
FT_Stroker stroker,
FT_Bool destroy )
{
FT_Error error = FT_Err_Invalid_Argument;
FT_Glyph glyph = NULL;
FT_Library library = stroker->library;
FT_UNUSED( library );
if ( pglyph == NULL )
goto Exit;
glyph = *pglyph;
if ( glyph == NULL || glyph->clazz != FT_OUTLINE_GLYPH_CLASS_GET )
goto Exit;
{
FT_Glyph copy;
error = FT_Glyph_Copy( glyph, &copy );
if ( error )
goto Exit;
glyph = copy;
}
{
FT_OutlineGlyph oglyph = (FT_OutlineGlyph)glyph;
FT_Outline* outline = &oglyph->outline;
FT_UInt num_points, num_contours;
error = FT_Stroker_ParseOutline( stroker, outline, FALSE );
if ( error )
goto Fail;
(void)FT_Stroker_GetCounts( stroker, &num_points, &num_contours );
FT_Outline_Done( glyph->library, outline );
error = FT_Outline_New( glyph->library,
num_points, num_contours, outline );
if ( error )
goto Fail;
outline->n_points = 0;
outline->n_contours = 0;
FT_Stroker_Export( stroker, outline );
}
if ( destroy )
FT_Done_Glyph( *pglyph );
*pglyph = glyph;
goto Exit;
Fail:
FT_Done_Glyph( glyph );
glyph = NULL;
if ( !destroy )
*pglyph = NULL;
Exit:
return error;
}
/* documentation is in ftstroke.h */
FT_EXPORT_DEF( FT_Error )
FT_Glyph_StrokeBorder( FT_Glyph *pglyph,
FT_Stroker stroker,
FT_Bool inside,
FT_Bool destroy )
{
FT_Error error = FT_Err_Invalid_Argument;
FT_Glyph glyph = NULL;
FT_Library library = stroker->library;
FT_UNUSED( library );
if ( pglyph == NULL )
goto Exit;
glyph = *pglyph;
if ( glyph == NULL || glyph->clazz != FT_OUTLINE_GLYPH_CLASS_GET )
goto Exit;
{
FT_Glyph copy;
error = FT_Glyph_Copy( glyph, &copy );
if ( error )
goto Exit;
glyph = copy;
}
{
FT_OutlineGlyph oglyph = (FT_OutlineGlyph)glyph;
FT_StrokerBorder border;
FT_Outline* outline = &oglyph->outline;
FT_UInt num_points, num_contours;
border = FT_Outline_GetOutsideBorder( outline );
if ( inside )
{
if ( border == FT_STROKER_BORDER_LEFT )
border = FT_STROKER_BORDER_RIGHT;
else
border = FT_STROKER_BORDER_LEFT;
}
error = FT_Stroker_ParseOutline( stroker, outline, FALSE );
if ( error )
goto Fail;
(void)FT_Stroker_GetBorderCounts( stroker, border,
&num_points, &num_contours );
FT_Outline_Done( glyph->library, outline );
error = FT_Outline_New( glyph->library,
num_points,
num_contours,
outline );
if ( error )
goto Fail;
outline->n_points = 0;
outline->n_contours = 0;
FT_Stroker_ExportBorder( stroker, border, outline );
}
if ( destroy )
FT_Done_Glyph( *pglyph );
*pglyph = glyph;
goto Exit;
Fail:
FT_Done_Glyph( glyph );
glyph = NULL;
if ( !destroy )
*pglyph = NULL;
Exit:
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftsynth.c */
/* */
/* FreeType synthesizing code for emboldening and slanting (body). */
/* */
/* Copyright 2000-2006, 2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftsynth.h */
/* */
/* FreeType synthesizing code for emboldening and slanting */
/* (specification). */
/* */
/* Copyright 2000-2001, 2003, 2006, 2008, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/********* *********/
/********* WARNING, THIS IS ALPHA CODE! THIS API *********/
/********* IS DUE TO CHANGE UNTIL STRICTLY NOTIFIED BY THE *********/
/********* FREETYPE DEVELOPMENT TEAM *********/
/********* *********/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* Main reason for not lifting the functions in this module to a */
/* `standard' API is that the used parameters for emboldening and */
/* slanting are not configurable. Consider the functions as a */
/* code resource which should be copied into the application and */
/* adapted to the particular needs. */
#define __FTSYNTH_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/* Embolden a glyph by a `reasonable' value (which is highly a matter of */
/* taste). This function is actually a convenience function, providing */
/* a wrapper for @FT_Outline_Embolden and @FT_Bitmap_Embolden. */
/* */
/* For emboldened outlines the height, width, and advance metrics are */
/* increased by the strength of the emboldening. You can also call */
/* @FT_Outline_Get_CBox to get precise values. */
FT_EXPORT( void )
FT_GlyphSlot_Embolden( FT_GlyphSlot slot );
/* Slant an outline glyph to the right by about 12 degrees. */
FT_EXPORT( void )
FT_GlyphSlot_Oblique( FT_GlyphSlot slot );
/* */
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_synth
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** EXPERIMENTAL OBLIQUING SUPPORT ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/* documentation is in ftsynth.h */
FT_EXPORT_DEF( void )
FT_GlyphSlot_Oblique( FT_GlyphSlot slot )
{
FT_Matrix transform;
FT_Outline* outline = &slot->outline;
/* only oblique outline glyphs */
if ( slot->format != FT_GLYPH_FORMAT_OUTLINE )
return;
/* we don't touch the advance width */
/* For italic, simply apply a shear transform, with an angle */
/* of about 12 degrees. */
transform.xx = 0x10000L;
transform.yx = 0x00000L;
transform.xy = 0x0366AL;
transform.yy = 0x10000L;
FT_Outline_Transform( outline, &transform );
}
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** EXPERIMENTAL EMBOLDENING SUPPORT ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/* documentation is in ftsynth.h */
FT_EXPORT_DEF( void )
FT_GlyphSlot_Embolden( FT_GlyphSlot slot )
{
FT_Library library = slot->library;
FT_Face face = slot->face;
FT_Error error;
FT_Pos xstr, ystr;
if ( slot->format != FT_GLYPH_FORMAT_OUTLINE &&
slot->format != FT_GLYPH_FORMAT_BITMAP )
return;
/* some reasonable strength */
xstr = FT_MulFix( face->units_per_EM,
face->size->metrics.y_scale ) / 24;
ystr = xstr;
if ( slot->format == FT_GLYPH_FORMAT_OUTLINE )
{
/* ignore error */
(void)FT_Outline_EmboldenXY( &slot->outline, xstr, ystr );
}
/* slot->format == FT_GLYPH_FORMAT_BITMAP */
else
{
/* round to full pixels */
xstr &= ~63;
if ( xstr == 0 )
xstr = 1 << 6;
ystr &= ~63;
/*
* XXX: overflow check for 16-bit system, for compatibility
* with FT_GlyphSlot_Embolden() since freetype-2.1.10.
* unfortunately, this function return no informations
* about the cause of error.
*/
if ( ( ystr >> 6 ) > FT_INT_MAX || ( ystr >> 6 ) < FT_INT_MIN )
{
FT_TRACE1(( "FT_GlyphSlot_Embolden:" ));
FT_TRACE1(( "too strong embolding parameter ystr=%d\n", ystr ));
return;
}
error = FT_GlyphSlot_Own_Bitmap( slot );
if ( error )
return;
error = FT_Bitmap_Embolden( library, &slot->bitmap, xstr, ystr );
if ( error )
return;
}
if ( slot->advance.x )
slot->advance.x += xstr;
if ( slot->advance.y )
slot->advance.y += ystr;
slot->metrics.width += xstr;
slot->metrics.height += ystr;
slot->metrics.horiAdvance += xstr;
slot->metrics.vertAdvance += ystr;
/* XXX: 16-bit overflow case must be excluded before here */
if ( slot->format == FT_GLYPH_FORMAT_BITMAP )
slot->bitmap_top += (FT_Int)( ystr >> 6 );
}
/* END */
/***************************************************************************/
/* */
/* ftwinfnt.c */
/* */
/* FreeType API for accessing Windows FNT specific info (body). */
/* */
/* Copyright 2003, 2004 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftwinfnt.h */
/* */
/* FreeType API for accessing Windows fnt-specific data. */
/* */
/* Copyright 2003, 2004, 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTWINFNT_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* winfnt_fonts */
/* */
/* <Title> */
/* Window FNT Files */
/* */
/* <Abstract> */
/* Windows FNT specific API. */
/* */
/* <Description> */
/* This section contains the declaration of Windows FNT specific */
/* functions. */
/* */
/*************************************************************************/
/*************************************************************************
*
* @enum:
* FT_WinFNT_ID_XXX
*
* @description:
* A list of valid values for the `charset' byte in
* @FT_WinFNT_HeaderRec. Exact mapping tables for the various cpXXXX
* encodings (except for cp1361) can be found at ftp://ftp.unicode.org
* in the MAPPINGS/VENDORS/MICSFT/WINDOWS subdirectory. cp1361 is
* roughly a superset of MAPPINGS/OBSOLETE/EASTASIA/KSC/JOHAB.TXT.
*
* @values:
* FT_WinFNT_ID_DEFAULT ::
* This is used for font enumeration and font creation as a
* `don't care' value. Valid font files don't contain this value.
* When querying for information about the character set of the font
* that is currently selected into a specified device context, this
* return value (of the related Windows API) simply denotes failure.
*
* FT_WinFNT_ID_SYMBOL ::
* There is no known mapping table available.
*
* FT_WinFNT_ID_MAC ::
* Mac Roman encoding.
*
* FT_WinFNT_ID_OEM ::
* From Michael Pöttgen <michael@poettgen.de>:
*
* The `Windows Font Mapping' article says that FT_WinFNT_ID_OEM
* is used for the charset of vector fonts, like `modern.fon',
* `roman.fon', and `script.fon' on Windows.
*
* The `CreateFont' documentation says: The FT_WinFNT_ID_OEM value
* specifies a character set that is operating-system dependent.
*
* The `IFIMETRICS' documentation from the `Windows Driver
* Development Kit' says: This font supports an OEM-specific
* character set. The OEM character set is system dependent.
*
* In general OEM, as opposed to ANSI (i.e., cp1252), denotes the
* second default codepage that most international versions of
* Windows have. It is one of the OEM codepages from
*
* http://www.microsoft.com/globaldev/reference/cphome.mspx,
*
* and is used for the `DOS boxes', to support legacy applications.
* A German Windows version for example usually uses ANSI codepage
* 1252 and OEM codepage 850.
*
* FT_WinFNT_ID_CP874 ::
* A superset of Thai TIS 620 and ISO 8859-11.
*
* FT_WinFNT_ID_CP932 ::
* A superset of Japanese Shift-JIS (with minor deviations).
*
* FT_WinFNT_ID_CP936 ::
* A superset of simplified Chinese GB 2312-1980 (with different
* ordering and minor deviations).
*
* FT_WinFNT_ID_CP949 ::
* A superset of Korean Hangul KS~C 5601-1987 (with different
* ordering and minor deviations).
*
* FT_WinFNT_ID_CP950 ::
* A superset of traditional Chinese Big~5 ETen (with different
* ordering and minor deviations).
*
* FT_WinFNT_ID_CP1250 ::
* A superset of East European ISO 8859-2 (with slightly different
* ordering).
*
* FT_WinFNT_ID_CP1251 ::
* A superset of Russian ISO 8859-5 (with different ordering).
*
* FT_WinFNT_ID_CP1252 ::
* ANSI encoding. A superset of ISO 8859-1.
*
* FT_WinFNT_ID_CP1253 ::
* A superset of Greek ISO 8859-7 (with minor modifications).
*
* FT_WinFNT_ID_CP1254 ::
* A superset of Turkish ISO 8859-9.
*
* FT_WinFNT_ID_CP1255 ::
* A superset of Hebrew ISO 8859-8 (with some modifications).
*
* FT_WinFNT_ID_CP1256 ::
* A superset of Arabic ISO 8859-6 (with different ordering).
*
* FT_WinFNT_ID_CP1257 ::
* A superset of Baltic ISO 8859-13 (with some deviations).
*
* FT_WinFNT_ID_CP1258 ::
* For Vietnamese. This encoding doesn't cover all necessary
* characters.
*
* FT_WinFNT_ID_CP1361 ::
* Korean (Johab).
*/
#define FT_WinFNT_ID_CP1252 0
#define FT_WinFNT_ID_DEFAULT 1
#define FT_WinFNT_ID_SYMBOL 2
#define FT_WinFNT_ID_MAC 77
#define FT_WinFNT_ID_CP932 128
#define FT_WinFNT_ID_CP949 129
#define FT_WinFNT_ID_CP1361 130
#define FT_WinFNT_ID_CP936 134
#define FT_WinFNT_ID_CP950 136
#define FT_WinFNT_ID_CP1253 161
#define FT_WinFNT_ID_CP1254 162
#define FT_WinFNT_ID_CP1258 163
#define FT_WinFNT_ID_CP1255 177
#define FT_WinFNT_ID_CP1256 178
#define FT_WinFNT_ID_CP1257 186
#define FT_WinFNT_ID_CP1251 204
#define FT_WinFNT_ID_CP874 222
#define FT_WinFNT_ID_CP1250 238
#define FT_WinFNT_ID_OEM 255
/*************************************************************************/
/* */
/* <Struct> */
/* FT_WinFNT_HeaderRec */
/* */
/* <Description> */
/* Windows FNT Header info. */
/* */
typedef struct FT_WinFNT_HeaderRec_
{
FT_UShort version;
FT_ULong file_size;
FT_Byte copyright[60];
FT_UShort file_type;
FT_UShort nominal_point_size;
FT_UShort vertical_resolution;
FT_UShort horizontal_resolution;
FT_UShort ascent;
FT_UShort internal_leading;
FT_UShort external_leading;
FT_Byte italic;
FT_Byte underline;
FT_Byte strike_out;
FT_UShort weight;
FT_Byte charset;
FT_UShort pixel_width;
FT_UShort pixel_height;
FT_Byte pitch_and_family;
FT_UShort avg_width;
FT_UShort max_width;
FT_Byte first_char;
FT_Byte last_char;
FT_Byte default_char;
FT_Byte break_char;
FT_UShort bytes_per_row;
FT_ULong device_offset;
FT_ULong face_name_offset;
FT_ULong bits_pointer;
FT_ULong bits_offset;
FT_Byte reserved;
FT_ULong flags;
FT_UShort A_space;
FT_UShort B_space;
FT_UShort C_space;
FT_UShort color_table_offset;
FT_ULong reserved1[4];
} FT_WinFNT_HeaderRec;
/*************************************************************************/
/* */
/* <Struct> */
/* FT_WinFNT_Header */
/* */
/* <Description> */
/* A handle to an @FT_WinFNT_HeaderRec structure. */
/* */
typedef struct FT_WinFNT_HeaderRec_* FT_WinFNT_Header;
/**********************************************************************
*
* @function:
* FT_Get_WinFNT_Header
*
* @description:
* Retrieve a Windows FNT font info header.
*
* @input:
* face :: A handle to the input face.
*
* @output:
* aheader :: The WinFNT header.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* This function only works with Windows FNT faces, returning an error
* otherwise.
*/
FT_EXPORT( FT_Error )
FT_Get_WinFNT_Header( FT_Face face,
FT_WinFNT_HeaderRec *aheader );
/* */
FT_END_HEADER
/* END */
/* Local Variables: */
/* coding: utf-8 */
/* End: */
/***************************************************************************/
/* */
/* svwinfnt.h */
/* */
/* The FreeType Windows FNT/FONT service (specification). */
/* */
/* Copyright 2003 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVWINFNT_H__
FT_BEGIN_HEADER
#define FT_SERVICE_ID_WINFNT "winfonts"
typedef FT_Error
(*FT_WinFnt_GetHeaderFunc)( FT_Face face,
FT_WinFNT_HeaderRec *aheader );
FT_DEFINE_SERVICE( WinFnt )
{
FT_WinFnt_GetHeaderFunc get_header;
};
/* */
FT_END_HEADER
/* END */
/* documentation is in ftwinfnt.h */
FT_EXPORT_DEF( FT_Error )
FT_Get_WinFNT_Header( FT_Face face,
FT_WinFNT_HeaderRec *header )
{
FT_Service_WinFnt service;
FT_Error error;
error = FT_Err_Invalid_Argument;
if ( face != NULL )
{
FT_FACE_LOOKUP_SERVICE( face, service, WINFNT );
if ( service != NULL )
{
error = service->get_header( face, header );
}
}
return error;
}
/* END */
/***************************************************************************/
/* */
/* ftxf86.c */
/* */
/* FreeType utility file for X11 support (body). */
/* */
/* Copyright 2002, 2003, 2004 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftxf86.h */
/* */
/* Support functions for X11. */
/* */
/* Copyright 2002, 2003, 2004, 2006, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTXF86_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* font_formats */
/* */
/* <Title> */
/* Font Formats */
/* */
/* <Abstract> */
/* Getting the font format. */
/* */
/* <Description> */
/* The single function in this section can be used to get the font */
/* format. Note that this information is not needed normally; */
/* however, there are special cases (like in PDF devices) where it is */
/* important to differentiate, in spite of FreeType's uniform API. */
/* */
/* This function is in the X11/xf86 namespace for historical reasons */
/* and in no way depends on that windowing system. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_Get_X11_Font_Format */
/* */
/* <Description> */
/* Return a string describing the format of a given face, using values */
/* which can be used as an X11 FONT_PROPERTY. Possible values are */
/* `TrueType', `Type~1', `BDF', `PCF', `Type~42', `CID~Type~1', `CFF', */
/* `PFR', and `Windows~FNT'. */
/* */
/* <Input> */
/* face :: */
/* Input face handle. */
/* */
/* <Return> */
/* Font format string. NULL in case of error. */
/* */
FT_EXPORT( const char* )
FT_Get_X11_Font_Format( FT_Face face );
/* */
FT_END_HEADER
/***************************************************************************/
/* */
/* svxf86nm.h */
/* */
/* The FreeType XFree86 services (specification only). */
/* */
/* Copyright 2003 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SVXF86NM_H__
FT_BEGIN_HEADER
/*
* A trivial service used to return the name of a face's font driver,
* according to the XFree86 nomenclature. Note that the service data
* is a simple constant string pointer.
*/
#define FT_SERVICE_ID_XF86_NAME "xf86-driver-name"
#define FT_XF86_FORMAT_TRUETYPE "TrueType"
#define FT_XF86_FORMAT_TYPE_1 "Type 1"
#define FT_XF86_FORMAT_BDF "BDF"
#define FT_XF86_FORMAT_PCF "PCF"
#define FT_XF86_FORMAT_TYPE_42 "Type 42"
#define FT_XF86_FORMAT_CID "CID Type 1"
#define FT_XF86_FORMAT_CFF "CFF"
#define FT_XF86_FORMAT_PFR "PFR"
#define FT_XF86_FORMAT_WINFNT "Windows FNT"
/* */
FT_END_HEADER
/* END */
/* documentation is in ftxf86.h */
FT_EXPORT_DEF( const char* )
FT_Get_X11_Font_Format( FT_Face face )
{
const char* result = NULL;
if ( face )
FT_FACE_FIND_SERVICE( face, result, XF86_NAME );
return result;
}
/* END */
/* bdf.c
FreeType font driver for bdf files
Copyright (C) 2001, 2002 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/*
* Copyright 2000 Computing Research Labs, New Mexico State University
* Copyright 2001-2012
* Francesco Zappa Nardelli
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COMPUTING RESEARCH LAB OR NEW MEXICO STATE UNIVERSITY BE LIABLE FOR ANY
* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT
* OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
* THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
/*************************************************************************/
/* */
/* This file is based on bdf.c,v 1.22 2000/03/16 20:08:50 */
/* */
/* taken from Mark Leisher's xmbdfed package */
/* */
/*************************************************************************/
/*
* Copyright 2000 Computing Research Labs, New Mexico State University
* Copyright 2001-2004, 2011 Francesco Zappa Nardelli
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COMPUTING RESEARCH LAB OR NEW MEXICO STATE UNIVERSITY BE LIABLE FOR ANY
* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT
* OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
* THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#define __BDF_H__
/*
* Based on bdf.h,v 1.16 2000/03/16 20:08:51 mleisher
*/
FT_BEGIN_HEADER
/* Imported from bdfP.h */
#define _bdf_glyph_modified( map, e ) \
( (map)[(e) >> 5] & ( 1 << ( (e) & 31 ) ) )
#define _bdf_set_glyph_modified( map, e ) \
( (map)[(e) >> 5] |= ( 1 << ( (e) & 31 ) ) )
#define _bdf_clear_glyph_modified( map, e ) \
( (map)[(e) >> 5] &= ~( 1 << ( (e) & 31 ) ) )
/* end of bdfP.h */
/*************************************************************************/
/* */
/* BDF font options macros and types. */
/* */
/*************************************************************************/
/* Correct invalid metrics when loading. */
#define BDF_CORRECT_METRICS 0x01
/* Preserve the font comments. */
#define BDF_KEEP_COMMENTS 0x02
/* Keep the unencoded glyphs. */
#define BDF_KEEP_UNENCODED 0x04
/* Font has proportional spacing. */
#define BDF_PROPORTIONAL 0x08
/* Font has mono width. */
#define BDF_MONOWIDTH 0x10
/* Font has charcell spacing. */
#define BDF_CHARCELL 0x20
#define BDF_ALL_SPACING ( BDF_PROPORTIONAL | \
BDF_MONOWIDTH | \
BDF_CHARCELL )
#define BDF_DEFAULT_LOAD_OPTIONS ( BDF_CORRECT_METRICS | \
BDF_KEEP_COMMENTS | \
BDF_KEEP_UNENCODED | \
BDF_PROPORTIONAL )
typedef struct bdf_options_t_
{
int correct_metrics;
int keep_unencoded;
int keep_comments;
int font_spacing;
} bdf_options_t;
/* Callback function type for unknown configuration options. */
typedef int
(*bdf_options_callback_t)( bdf_options_t* opts,
char** params,
unsigned long nparams,
void* client_data );
/*************************************************************************/
/* */
/* BDF font property macros and types. */
/* */
/*************************************************************************/
#define BDF_ATOM 1
#define BDF_INTEGER 2
#define BDF_CARDINAL 3
/* This structure represents a particular property of a font. */
/* There are a set of defaults and each font has their own. */
typedef struct bdf_property_t_
{
/* Name of the property. */
char* name;
/* Format of the property. */
int format;
/* A builtin property. */
int builtin;
union
{
char* atom;
long l;
unsigned long ul;
/* Value of the property. */
} value;
} bdf_property_t;
/*************************************************************************/
/* */
/* BDF font metric and glyph types. */
/* */
/*************************************************************************/
typedef struct bdf_bbx_t_
{
unsigned short width;
unsigned short height;
short x_offset;
short y_offset;
short ascent;
short descent;
} bdf_bbx_t;
typedef struct bdf_glyph_t_
{
/* Glyph name. */
char* name;
/* Glyph encoding. */
long encoding;
/* Scalable width. */
unsigned short swidth;
/* Device width. */
unsigned short dwidth;
/* Glyph bounding box. */
bdf_bbx_t bbx;
/* Glyph bitmap. */
unsigned char* bitmap;
/* Number of bytes used per row. */
unsigned long bpr;
/* Number of bytes used for the bitmap. */
unsigned short bytes;
} bdf_glyph_t;
typedef struct _hashnode_
{
const char* key;
size_t data;
} _hashnode, *hashnode;
typedef struct hashtable_
{
int limit;
int size;
int used;
hashnode* table;
} hashtable;
typedef struct bdf_glyphlist_t_
{
/* Pad to 4-byte boundary. */
unsigned short pad;
/* Bits per pixel. */
unsigned short bpp;
/* Beginning encoding value of glyphs. */
long start;
/* Ending encoding value of glyphs. */
long end;
/* Glyphs themselves. */
bdf_glyph_t* glyphs;
/* Glyph structures allocated. */
unsigned long glyphs_size;
/* Glyph structures used. */
unsigned long glyphs_used;
/* Overall bounding box of glyphs. */
bdf_bbx_t bbx;
} bdf_glyphlist_t;
typedef struct bdf_font_t_
{
/* Name of the font. */
char* name;
/* Font bounding box. */
bdf_bbx_t bbx;
/* Point size of the font. */
long point_size;
/* Font horizontal resolution. */
unsigned long resolution_x;
/* Font vertical resolution. */
unsigned long resolution_y;
/* Font spacing value. */
int spacing;
/* Logical width for monowidth font. */
unsigned short monowidth;
/* Encoding of the default glyph. */
long default_char;
/* Font ascent. */
long font_ascent;
/* Font descent. */
long font_descent;
/* Glyph structures allocated. */
unsigned long glyphs_size;
/* Glyph structures used. */
unsigned long glyphs_used;
/* Glyphs themselves. */
bdf_glyph_t* glyphs;
/* Unencoded glyph struct. allocated. */
unsigned long unencoded_size;
/* Unencoded glyph struct. used. */
unsigned long unencoded_used;
/* Unencoded glyphs themselves. */
bdf_glyph_t* unencoded;
/* Font properties allocated. */
unsigned long props_size;
/* Font properties used. */
unsigned long props_used;
/* Font properties themselves. */
bdf_property_t* props;
/* Font comments. */
char* comments;
/* Length of comment string. */
unsigned long comments_len;
/* Storage used for glyph insertion. */
bdf_glyphlist_t overflow;
/* Internal data for the font. */
void* internal;
/* The size of the next two arrays must be in sync with the */
/* size of the `have' array in the `bdf_parse_t' structure. */
/* Bitmap indicating modified glyphs. */
unsigned long nmod[34816];
/* Bitmap indicating modified */
unsigned long umod[34816];
/* unencoded glyphs. */
/* Boolean indicating font modified. */
unsigned short modified;
/* Bits per pixel. */
unsigned short bpp;
FT_Memory memory;
bdf_property_t* user_props;
unsigned long nuser_props;
hashtable proptbl;
} bdf_font_t;
/*************************************************************************/
/* */
/* Types for load/save callbacks. */
/* */
/*************************************************************************/
/* Error codes. */
#define BDF_MISSING_START -1
#define BDF_MISSING_FONTNAME -2
#define BDF_MISSING_SIZE -3
#define BDF_MISSING_CHARS -4
#define BDF_MISSING_STARTCHAR -5
#define BDF_MISSING_ENCODING -6
#define BDF_MISSING_BBX -7
#define BDF_OUT_OF_MEMORY -20
#define BDF_INVALID_LINE -100
/*************************************************************************/
/* */
/* BDF font API. */
/* */
/*************************************************************************/
FT_LOCAL( FT_Error )
bdf_load_font( FT_Stream stream,
FT_Memory memory,
bdf_options_t* opts,
bdf_font_t* *font );
FT_LOCAL( void )
bdf_free_font( bdf_font_t* font );
FT_LOCAL( bdf_property_t * )
bdf_get_property( char* name,
bdf_font_t* font );
FT_LOCAL( bdf_property_t * )
bdf_get_font_property( bdf_font_t* font,
const char* name );
FT_END_HEADER
/* END */
/*
* Copyright 2001, 2002, 2012 Francesco Zappa Nardelli
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COMPUTING RESEARCH LAB OR NEW MEXICO STATE UNIVERSITY BE LIABLE FOR ANY
* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT
* OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
* THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
/*************************************************************************/
/* */
/* This file is used to define the BDF error enumeration constants. */
/* */
/*************************************************************************/
#define __BDFERROR_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX BDF_Err_
#define FT_ERR_BASE FT_Mod_Err_BDF
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_bdflib
/*************************************************************************/
/* */
/* Default BDF font options. */
/* */
/*************************************************************************/
static const bdf_options_t _bdf_opts =
{
/* Correct metrics. */
1,
/* Preserve unencoded glyphs. */
1,
/* Preserve comments. */
0,
/* Default spacing. */
BDF_PROPORTIONAL
};
/*************************************************************************/
/* */
/* Builtin BDF font properties. */
/* */
/*************************************************************************/
/* List of most properties that might appear in a font. Doesn't include */
/* the RAW_* and AXIS_* properties in X11R6 polymorphic fonts. */
static const bdf_property_t _bdf_properties[] =
{
{ (char *)"ADD_STYLE_NAME", BDF_ATOM, 1, { 0 } },
{ (char *)"AVERAGE_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"AVG_CAPITAL_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"AVG_LOWERCASE_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"CAP_HEIGHT", BDF_INTEGER, 1, { 0 } },
{ (char *)"CHARSET_COLLECTIONS", BDF_ATOM, 1, { 0 } },
{ (char *)"CHARSET_ENCODING", BDF_ATOM, 1, { 0 } },
{ (char *)"CHARSET_REGISTRY", BDF_ATOM, 1, { 0 } },
{ (char *)"COMMENT", BDF_ATOM, 1, { 0 } },
{ (char *)"COPYRIGHT", BDF_ATOM, 1, { 0 } },
{ (char *)"DEFAULT_CHAR", BDF_CARDINAL, 1, { 0 } },
{ (char *)"DESTINATION", BDF_CARDINAL, 1, { 0 } },
{ (char *)"DEVICE_FONT_NAME", BDF_ATOM, 1, { 0 } },
{ (char *)"END_SPACE", BDF_INTEGER, 1, { 0 } },
{ (char *)"FACE_NAME", BDF_ATOM, 1, { 0 } },
{ (char *)"FAMILY_NAME", BDF_ATOM, 1, { 0 } },
{ (char *)"FIGURE_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"FONT", BDF_ATOM, 1, { 0 } },
{ (char *)"FONTNAME_REGISTRY", BDF_ATOM, 1, { 0 } },
{ (char *)"FONT_ASCENT", BDF_INTEGER, 1, { 0 } },
{ (char *)"FONT_DESCENT", BDF_INTEGER, 1, { 0 } },
{ (char *)"FOUNDRY", BDF_ATOM, 1, { 0 } },
{ (char *)"FULL_NAME", BDF_ATOM, 1, { 0 } },
{ (char *)"ITALIC_ANGLE", BDF_INTEGER, 1, { 0 } },
{ (char *)"MAX_SPACE", BDF_INTEGER, 1, { 0 } },
{ (char *)"MIN_SPACE", BDF_INTEGER, 1, { 0 } },
{ (char *)"NORM_SPACE", BDF_INTEGER, 1, { 0 } },
{ (char *)"NOTICE", BDF_ATOM, 1, { 0 } },
{ (char *)"PIXEL_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"POINT_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"QUAD_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_ASCENT", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_AVERAGE_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_AVG_CAPITAL_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_AVG_LOWERCASE_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_CAP_HEIGHT", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_DESCENT", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_END_SPACE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_FIGURE_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_MAX_SPACE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_MIN_SPACE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_NORM_SPACE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_PIXEL_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_POINT_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_PIXELSIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_POINTSIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_QUAD_WIDTH", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_SMALL_CAP_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_STRIKEOUT_ASCENT", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_STRIKEOUT_DESCENT", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_SUBSCRIPT_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_SUBSCRIPT_X", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_SUBSCRIPT_Y", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_SUPERSCRIPT_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_SUPERSCRIPT_X", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_SUPERSCRIPT_Y", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_UNDERLINE_POSITION", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_UNDERLINE_THICKNESS", BDF_INTEGER, 1, { 0 } },
{ (char *)"RAW_X_HEIGHT", BDF_INTEGER, 1, { 0 } },
{ (char *)"RELATIVE_SETWIDTH", BDF_CARDINAL, 1, { 0 } },
{ (char *)"RELATIVE_WEIGHT", BDF_CARDINAL, 1, { 0 } },
{ (char *)"RESOLUTION", BDF_INTEGER, 1, { 0 } },
{ (char *)"RESOLUTION_X", BDF_CARDINAL, 1, { 0 } },
{ (char *)"RESOLUTION_Y", BDF_CARDINAL, 1, { 0 } },
{ (char *)"SETWIDTH_NAME", BDF_ATOM, 1, { 0 } },
{ (char *)"SLANT", BDF_ATOM, 1, { 0 } },
{ (char *)"SMALL_CAP_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"SPACING", BDF_ATOM, 1, { 0 } },
{ (char *)"STRIKEOUT_ASCENT", BDF_INTEGER, 1, { 0 } },
{ (char *)"STRIKEOUT_DESCENT", BDF_INTEGER, 1, { 0 } },
{ (char *)"SUBSCRIPT_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"SUBSCRIPT_X", BDF_INTEGER, 1, { 0 } },
{ (char *)"SUBSCRIPT_Y", BDF_INTEGER, 1, { 0 } },
{ (char *)"SUPERSCRIPT_SIZE", BDF_INTEGER, 1, { 0 } },
{ (char *)"SUPERSCRIPT_X", BDF_INTEGER, 1, { 0 } },
{ (char *)"SUPERSCRIPT_Y", BDF_INTEGER, 1, { 0 } },
{ (char *)"UNDERLINE_POSITION", BDF_INTEGER, 1, { 0 } },
{ (char *)"UNDERLINE_THICKNESS", BDF_INTEGER, 1, { 0 } },
{ (char *)"WEIGHT", BDF_CARDINAL, 1, { 0 } },
{ (char *)"WEIGHT_NAME", BDF_ATOM, 1, { 0 } },
{ (char *)"X_HEIGHT", BDF_INTEGER, 1, { 0 } },
{ (char *)"_MULE_BASELINE_OFFSET", BDF_INTEGER, 1, { 0 } },
{ (char *)"_MULE_RELATIVE_COMPOSE", BDF_INTEGER, 1, { 0 } },
};
static const unsigned long
_num_bdf_properties = sizeof ( _bdf_properties ) /
sizeof ( _bdf_properties[0] );
/* Auto correction messages. */
#define ACMSG1 "FONT_ASCENT property missing. " \
"Added `FONT_ASCENT %hd'.\n"
#define ACMSG2 "FONT_DESCENT property missing. " \
"Added `FONT_DESCENT %hd'.\n"
#define ACMSG3 "Font width != actual width. Old: %hd New: %hd.\n"
#define ACMSG4 "Font left bearing != actual left bearing. " \
"Old: %hd New: %hd.\n"
#define ACMSG5 "Font ascent != actual ascent. Old: %hd New: %hd.\n"
#define ACMSG6 "Font descent != actual descent. Old: %hd New: %hd.\n"
#define ACMSG7 "Font height != actual height. Old: %hd New: %hd.\n"
#define ACMSG8 "Glyph scalable width (SWIDTH) adjustments made.\n"
#define ACMSG9 "SWIDTH field missing at line %ld. Set automatically.\n"
#define ACMSG10 "DWIDTH field missing at line %ld. Set to glyph width.\n"
#define ACMSG11 "SIZE bits per pixel field adjusted to %hd.\n"
#define ACMSG12 "Duplicate encoding %ld (%s) changed to unencoded.\n"
#define ACMSG13 "Glyph %ld extra rows removed.\n"
#define ACMSG14 "Glyph %ld extra columns removed.\n"
#define ACMSG15 "Incorrect glyph count: %ld indicated but %ld found.\n"
#define ACMSG16 "Glyph %ld missing columns padded with zero bits.\n"
/* Error messages. */
#define ERRMSG1 "[line %ld] Missing `%s' line.\n"
#define ERRMSG2 "[line %ld] Font header corrupted or missing fields.\n"
#define ERRMSG3 "[line %ld] Font glyphs corrupted or missing fields.\n"
#define ERRMSG4 "[line %ld] BBX too big.\n"
#define ERRMSG5 "[line %ld] `%s' value too big.\n"
#define ERRMSG6 "[line %ld] Input line too long.\n"
#define ERRMSG7 "[line %ld] Font name too long.\n"
#define ERRMSG8 "[line %ld] Invalid `%s' value.\n"
#define ERRMSG9 "[line %ld] Invalid keyword.\n"
/* Debug messages. */
/* no \n */
#define DBGMSG1 " [%6ld] %s"
#define DBGMSG2 " (0x%lX)\n"
/*************************************************************************/
/* */
/* Hash table utilities for the properties. */
/* */
/*************************************************************************/
/* XXX: Replace this with FreeType's hash functions */
#define INITIAL_HT_SIZE 241
typedef void
(*hash_free_func)( hashnode node );
static hashnode*
hash_bucket( const char* key,
hashtable* ht )
{
const char* kp = key;
unsigned long res = 0;
hashnode* bp = ht->table, *ndp;
/* Mocklisp hash function. */
while ( *kp )
res = ( res << 5 ) - res + *kp++;
ndp = bp + ( res % ht->size );
while ( *ndp )
{
kp = (*ndp)->key;
if ( kp[0] == key[0] && ft_strcmp( kp, key ) == 0 )
break;
ndp--;
if ( ndp < bp )
ndp = bp + ( ht->size - 1 );
}
return ndp;
}
static FT_Error
hash_rehash( hashtable* ht,
FT_Memory memory )
{
hashnode* obp = ht->table, *bp, *nbp;
int i, sz = ht->size;
FT_Error error = BDF_Err_Ok;
ht->size <<= 1;
ht->limit = ht->size / 3;
if ( FT_NEW_ARRAY( ht->table, ht->size ) )
goto Exit;
for ( i = 0, bp = obp; i < sz; i++, bp++ )
{
if ( *bp )
{
nbp = hash_bucket( (*bp)->key, ht );
*nbp = *bp;
}
}
FT_FREE( obp );
Exit:
return error;
}
static FT_Error
hash_init( hashtable* ht,
FT_Memory memory )
{
int sz = INITIAL_HT_SIZE;
FT_Error error = BDF_Err_Ok;
ht->size = sz;
ht->limit = sz / 3;
ht->used = 0;
if ( FT_NEW_ARRAY( ht->table, sz ) )
goto Exit;
Exit:
return error;
}
static void
hash_free( hashtable* ht,
FT_Memory memory )
{
if ( ht != 0 )
{
int i, sz = ht->size;
hashnode* bp = ht->table;
for ( i = 0; i < sz; i++, bp++ )
FT_FREE( *bp );
FT_FREE( ht->table );
}
}
static FT_Error
hash_insert( char* key,
size_t data,
hashtable* ht,
FT_Memory memory )
{
hashnode nn, *bp = hash_bucket( key, ht );
FT_Error error = BDF_Err_Ok;
nn = *bp;
if ( !nn )
{
if ( FT_NEW( nn ) )
goto Exit;
*bp = nn;
nn->key = key;
nn->data = data;
if ( ht->used >= ht->limit )
{
error = hash_rehash( ht, memory );
if ( error )
goto Exit;
}
ht->used++;
}
else
nn->data = data;
Exit:
return error;
}
static hashnode
hash_lookup( const char* key,
hashtable* ht )
{
hashnode *np = hash_bucket( key, ht );
return *np;
}
/*************************************************************************/
/* */
/* Utility types and functions. */
/* */
/*************************************************************************/
/* Function type for parsing lines of a BDF font. */
typedef FT_Error
(*_bdf_line_func_t)( char* line,
unsigned long linelen,
unsigned long lineno,
void* call_data,
void* client_data );
/* List structure for splitting lines into fields. */
typedef struct _bdf_list_t_
{
char** field;
unsigned long size;
unsigned long used;
FT_Memory memory;
} _bdf_list_t;
/* Structure used while loading BDF fonts. */
typedef struct _bdf_parse_t_
{
unsigned long flags;
unsigned long cnt;
unsigned long row;
short minlb;
short maxlb;
short maxrb;
short maxas;
short maxds;
short rbearing;
char* glyph_name;
long glyph_enc;
bdf_font_t* font;
bdf_options_t* opts;
/* must be in sync with `nmod' and `umod' */
unsigned long have[34816];
/* arrays from `bdf_font_t' structure */
_bdf_list_t list;
FT_Memory memory;
} _bdf_parse_t;
#define setsbit( m, cc ) \
( m[(FT_Byte)(cc) >> 3] |= (FT_Byte)( 1 << ( (cc) & 7 ) ) )
#define sbitset( m, cc ) \
( m[(FT_Byte)(cc) >> 3] & ( 1 << ( (cc) & 7 ) ) )
static void
_bdf_list_init( _bdf_list_t* list,
FT_Memory memory )
{
FT_ZERO( list );
list->memory = memory;
}
static void
_bdf_list_done( _bdf_list_t* list )
{
FT_Memory memory = list->memory;
if ( memory )
{
FT_FREE( list->field );
FT_ZERO( list );
}
}
static FT_Error
_bdf_list_ensure( _bdf_list_t* list,
/* same as _bdf_list_t.used */
unsigned long num_items )
{
FT_Error error = BDF_Err_Ok;
if ( num_items > list->size )
{
/* same as _bdf_list_t.size */
unsigned long oldsize = list->size;
unsigned long newsize = oldsize + ( oldsize >> 1 ) + 5;
unsigned long bigsize = (unsigned long)( FT_INT_MAX / sizeof ( char* ) );
FT_Memory memory = list->memory;
if ( oldsize == bigsize )
{
error = BDF_Err_Out_Of_Memory;
goto Exit;
}
else if ( newsize < oldsize || newsize > bigsize )
newsize = bigsize;
if ( FT_RENEW_ARRAY( list->field, oldsize, newsize ) )
goto Exit;
list->size = newsize;
}
Exit:
return error;
}
static void
_bdf_list_shift( _bdf_list_t* list,
unsigned long n )
{
unsigned long i, u;
if ( list == 0 || list->used == 0 || n == 0 )
return;
if ( n >= list->used )
{
list->used = 0;
return;
}
for ( u = n, i = 0; u < list->used; i++, u++ )
list->field[i] = list->field[u];
list->used -= n;
}
/* An empty string for empty fields. */
/* XXX eliminate this */
static const char ft_empty[1] = { 0 };
static char *
_bdf_list_join( _bdf_list_t* list,
int c,
unsigned long *alen )
{
unsigned long i, j;
char *fp, *dp;
*alen = 0;
if ( list == 0 || list->used == 0 )
return 0;
dp = list->field[0];
for ( i = j = 0; i < list->used; i++ )
{
fp = list->field[i];
while ( *fp )
dp[j++] = *fp++;
if ( i + 1 < list->used )
dp[j++] = (char)c;
}
if ( dp != ft_empty )
dp[j] = 0;
*alen = j;
return dp;
}
/* The code below ensures that we have at least 4 + 1 `field' */
/* elements in `list' (which are possibly NULL) so that we */
/* don't have to check the number of fields in most cases. */
static FT_Error
_bdf_list_split( _bdf_list_t* list,
char* separators,
char* line,
unsigned long linelen )
{
int mult, final_empty;
char *sp, *ep, *end;
char seps[32];
FT_Error error = BDF_Err_Ok;
/* Initialize the list. */
list->used = 0;
if ( list->size )
{
list->field[0] = (char*)ft_empty;
list->field[1] = (char*)ft_empty;
list->field[2] = (char*)ft_empty;
list->field[3] = (char*)ft_empty;
list->field[4] = (char*)ft_empty;
}
/* If the line is empty, then simply return. */
if ( linelen == 0 || line[0] == 0 )
goto Exit;
/* In the original code, if the `separators' parameter is NULL or */
/* empty, the list is split into individual bytes. We don't need */
/* this, so an error is signaled. */
if ( separators == 0 || *separators == 0 )
{
error = BDF_Err_Invalid_Argument;
goto Exit;
}
/* Prepare the separator bitmap. */
FT_MEM_ZERO( seps, 32 );
/* If the very last character of the separator string is a plus, then */
/* set the `mult' flag to indicate that multiple separators should be */
/* collapsed into one. */
for ( mult = 0, sp = separators; sp && *sp; sp++ )
{
if ( *sp == '+' && *( sp + 1 ) == 0 )
mult = 1;
else
setsbit( seps, *sp );
}
/* Break the line up into fields. */
for ( final_empty = 0, sp = ep = line, end = sp + linelen;
sp < end && *sp; )
{
/* Collect everything that is not a separator. */
for ( ; *ep && !sbitset( seps, *ep ); ep++ )
;
/* Resize the list if necessary. */
if ( list->used == list->size )
{
error = _bdf_list_ensure( list, list->used + 1 );
if ( error )
goto Exit;
}
/* Assign the field appropriately. */
list->field[list->used++] = ( ep > sp ) ? sp : (char*)ft_empty;
sp = ep;
if ( mult )
{
/* If multiple separators should be collapsed, do it now by */
/* setting all the separator characters to 0. */
for ( ; *ep && sbitset( seps, *ep ); ep++ )
*ep = 0;
}
else if ( *ep != 0 )
/* Don't collapse multiple separators by making them 0, so just */
/* make the one encountered 0. */
*ep++ = 0;
final_empty = ( ep > sp && *ep == 0 );
sp = ep;
}
/* Finally, NULL-terminate the list. */
if ( list->used + final_empty >= list->size )
{
error = _bdf_list_ensure( list, list->used + final_empty + 1 );
if ( error )
goto Exit;
}
if ( final_empty )
list->field[list->used++] = (char*)ft_empty;
list->field[list->used] = 0;
Exit:
return error;
}
/* this value cannot be stored in a 'char' */
#define NO_SKIP 256
static FT_Error
_bdf_readstream( FT_Stream stream,
_bdf_line_func_t callback,
void* client_data,
unsigned long *lno )
{
_bdf_line_func_t cb;
unsigned long lineno, buf_size;
int refill, hold, to_skip;
ptrdiff_t bytes, start, end, cursor, avail;
char* buf = 0;
FT_Memory memory = stream->memory;
FT_Error error = BDF_Err_Ok;
if ( callback == 0 )
{
error = BDF_Err_Invalid_Argument;
goto Exit;
}
/* initial size and allocation of the input buffer */
buf_size = 1024;
if ( FT_NEW_ARRAY( buf, buf_size ) )
goto Exit;
cb = callback;
lineno = 1;
buf[0] = 0;
start = 0;
end = 0;
avail = 0;
cursor = 0;
refill = 1;
to_skip = NO_SKIP;
/* make compiler happy */
bytes = 0;
for (;;)
{
if ( refill )
{
bytes = (ptrdiff_t)FT_Stream_TryRead(
stream, (FT_Byte*)buf + cursor,
(FT_ULong)( buf_size - cursor ) );
avail = cursor + bytes;
cursor = 0;
refill = 0;
}
end = start;
/* should we skip an optional character like \n or \r? */
if ( start < avail && buf[start] == to_skip )
{
start += 1;
to_skip = NO_SKIP;
continue;
}
/* try to find the end of the line */
while ( end < avail && buf[end] != '\n' && buf[end] != '\r' )
end++;
/* if we hit the end of the buffer, try shifting its content */
/* or even resizing it */
if ( end >= avail )
{
/* last line in file doesn't end in \r or \n */
if ( bytes == 0 )
/* ignore it then exit */
break;
if ( start == 0 )
{
/* this line is definitely too long; try resizing the input */
/* buffer a bit to handle it. */
FT_ULong new_size;
/* limit ourselves to 64KByte */
if ( buf_size >= 65536UL )
{
FT_ERROR(( "_bdf_readstream: " ERRMSG6, lineno ));
error = BDF_Err_Invalid_Argument;
goto Exit;
}
new_size = buf_size * 2;
if ( FT_RENEW_ARRAY( buf, buf_size, new_size ) )
goto Exit;
cursor = buf_size;
buf_size = new_size;
}
else
{
bytes = avail - start;
FT_MEM_COPY( buf, buf + start, bytes );
cursor = bytes;
avail -= bytes;
start = 0;
}
refill = 1;
continue;
}
/* Temporarily NUL-terminate the line. */
hold = buf[end];
buf[end] = 0;
/* XXX: Use encoding independent value for 0x1a */
if ( buf[start] != '#' && buf[start] != 0x1a && end > start )
{
error = (*cb)( buf + start, (unsigned long)( end - start ), lineno,
(void*)&cb, client_data );
/* Redo if we have encountered CHARS without properties. */
if ( error == -1 )
error = (*cb)( buf + start, (unsigned long)( end - start ), lineno,
(void*)&cb, client_data );
if ( error )
break;
}
lineno += 1;
buf[end] = (char)hold;
start = end + 1;
if ( hold == '\n' )
to_skip = '\r';
else if ( hold == '\r' )
to_skip = '\n';
else
to_skip = NO_SKIP;
}
*lno = lineno;
Exit:
FT_FREE( buf );
return error;
}
/* XXX: make this work with EBCDIC also */
static const unsigned char a2i[128] =
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
static const unsigned char odigits[32] =
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
static const unsigned char ddigits[32] =
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x03,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
static const unsigned char hdigits[32] =
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x03,
0x7e, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
/* Routine to convert an ASCII string into an unsigned long integer. */
static unsigned long
_bdf_atoul( char* s,
char** end,
int base )
{
unsigned long v;
const unsigned char* dmap;
if ( s == 0 || *s == 0 )
return 0;
/* Make sure the radix is something recognizable. Default to 10. */
switch ( base )
{
case 8:
dmap = odigits;
break;
case 16:
dmap = hdigits;
break;
default:
base = 10;
dmap = ddigits;
break;
}
/* Check for the special hex prefix. */
if ( *s == '0' &&
( *( s + 1 ) == 'x' || *( s + 1 ) == 'X' ) )
{
base = 16;
dmap = hdigits;
s += 2;
}
for ( v = 0; sbitset( dmap, *s ); s++ )
v = v * base + a2i[(int)*s];
if ( end != 0 )
*end = s;
return v;
}
/* Routine to convert an ASCII string into an signed long integer. */
static long
_bdf_atol( char* s,
char** end,
int base )
{
long v, neg;
const unsigned char* dmap;
if ( s == 0 || *s == 0 )
return 0;
/* Make sure the radix is something recognizable. Default to 10. */
switch ( base )
{
case 8:
dmap = odigits;
break;
case 16:
dmap = hdigits;
break;
default:
base = 10;
dmap = ddigits;
break;
}
/* Check for a minus sign. */
neg = 0;
if ( *s == '-' )
{
s++;
neg = 1;
}
/* Check for the special hex prefix. */
if ( *s == '0' &&
( *( s + 1 ) == 'x' || *( s + 1 ) == 'X' ) )
{
base = 16;
dmap = hdigits;
s += 2;
}
for ( v = 0; sbitset( dmap, *s ); s++ )
v = v * base + a2i[(int)*s];
if ( end != 0 )
*end = s;
return ( !neg ) ? v : -v;
}
/* Routine to convert an ASCII string into an signed short integer. */
static short
_bdf_atos( char* s,
char** end,
int base )
{
short v, neg;
const unsigned char* dmap;
if ( s == 0 || *s == 0 )
return 0;
/* Make sure the radix is something recognizable. Default to 10. */
switch ( base )
{
case 8:
dmap = odigits;
break;
case 16:
dmap = hdigits;
break;
default:
base = 10;
dmap = ddigits;
break;
}
/* Check for a minus. */
neg = 0;
if ( *s == '-' )
{
s++;
neg = 1;
}
/* Check for the special hex prefix. */
if ( *s == '0' &&
( *( s + 1 ) == 'x' || *( s + 1 ) == 'X' ) )
{
base = 16;
dmap = hdigits;
s += 2;
}
for ( v = 0; sbitset( dmap, *s ); s++ )
v = (short)( v * base + a2i[(int)*s] );
if ( end != 0 )
*end = s;
return (short)( ( !neg ) ? v : -v );
}
/* Routine to compare two glyphs by encoding so they can be sorted. */
static int
by_encoding( const void* a,
const void* b )
{
bdf_glyph_t *c1, *c2;
c1 = (bdf_glyph_t *)a;
c2 = (bdf_glyph_t *)b;
if ( c1->encoding < c2->encoding )
return -1;
if ( c1->encoding > c2->encoding )
return 1;
return 0;
}
static FT_Error
bdf_create_property( char* name,
int format,
bdf_font_t* font )
{
size_t n;
bdf_property_t* p;
FT_Memory memory = font->memory;
FT_Error error = BDF_Err_Ok;
/* First check whether the property has */
/* already been added or not. If it has, then */
/* simply ignore it. */
if ( hash_lookup( name, &(font->proptbl) ) )
goto Exit;
if ( FT_RENEW_ARRAY( font->user_props,
font->nuser_props,
font->nuser_props + 1 ) )
goto Exit;
p = font->user_props + font->nuser_props;
FT_ZERO( p );
n = ft_strlen( name ) + 1;
if ( n > FT_ULONG_MAX )
return BDF_Err_Invalid_Argument;
if ( FT_NEW_ARRAY( p->name, n ) )
goto Exit;
FT_MEM_COPY( (char *)p->name, name, n );
p->format = format;
p->builtin = 0;
n = _num_bdf_properties + font->nuser_props;
error = hash_insert( p->name, n, &(font->proptbl), memory );
if ( error )
goto Exit;
font->nuser_props++;
Exit:
return error;
}
FT_LOCAL_DEF( bdf_property_t * )
bdf_get_property( char* name,
bdf_font_t* font )
{
hashnode hn;
size_t propid;
if ( name == 0 || *name == 0 )
return 0;
if ( ( hn = hash_lookup( name, &(font->proptbl) ) ) == 0 )
return 0;
propid = hn->data;
if ( propid >= _num_bdf_properties )
return font->user_props + ( propid - _num_bdf_properties );
return (bdf_property_t*)_bdf_properties + propid;
}
/*************************************************************************/
/* */
/* BDF font file parsing flags and functions. */
/* */
/*************************************************************************/
/* Parse flags. */
#define _BDF_START 0x0001
#define _BDF_FONT_NAME 0x0002
#define _BDF_SIZE 0x0004
#define _BDF_FONT_BBX 0x0008
#define _BDF_PROPS 0x0010
#define _BDF_GLYPHS 0x0020
#define _BDF_GLYPH 0x0040
#define _BDF_ENCODING 0x0080
#define _BDF_SWIDTH 0x0100
#define _BDF_DWIDTH 0x0200
#define _BDF_BBX 0x0400
#define _BDF_BITMAP 0x0800
#define _BDF_SWIDTH_ADJ 0x1000
#define _BDF_GLYPH_BITS ( _BDF_GLYPH | \
_BDF_ENCODING | \
_BDF_SWIDTH | \
_BDF_DWIDTH | \
_BDF_BBX | \
_BDF_BITMAP )
#define _BDF_GLYPH_WIDTH_CHECK 0x40000000UL
#define _BDF_GLYPH_HEIGHT_CHECK 0x80000000UL
static FT_Error
_bdf_add_comment( bdf_font_t* font,
char* comment,
unsigned long len )
{
char* cp;
FT_Memory memory = font->memory;
FT_Error error = BDF_Err_Ok;
if ( FT_RENEW_ARRAY( font->comments,
font->comments_len,
font->comments_len + len + 1 ) )
goto Exit;
cp = font->comments + font->comments_len;
FT_MEM_COPY( cp, comment, len );
cp[len] = '\n';
font->comments_len += len + 1;
Exit:
return error;
}
/* Set the spacing from the font name if it exists, or set it to the */
/* default specified in the options. */
static FT_Error
_bdf_set_default_spacing( bdf_font_t* font,
bdf_options_t* opts,
unsigned long lineno )
{
size_t len;
char name[256];
_bdf_list_t list;
FT_Memory memory;
FT_Error error = BDF_Err_Ok;
if ( font == 0 || font->name == 0 || font->name[0] == 0 )
{
error = BDF_Err_Invalid_Argument;
goto Exit;
}
memory = font->memory;
_bdf_list_init( &list, memory );
font->spacing = opts->font_spacing;
len = ft_strlen( font->name ) + 1;
/* Limit ourselves to 256 characters in the font name. */
if ( len >= 256 )
{
FT_ERROR(( "_bdf_set_default_spacing: " ERRMSG7, lineno ));
error = BDF_Err_Invalid_Argument;
goto Exit;
}
FT_MEM_COPY( name, font->name, len );
error = _bdf_list_split( &list, (char *)"-", name, len );
if ( error )
goto Fail;
if ( list.used == 15 )
{
switch ( list.field[11][0] )
{
case 'C':
case 'c':
font->spacing = BDF_CHARCELL;
break;
case 'M':
case 'm':
font->spacing = BDF_MONOWIDTH;
break;
case 'P':
case 'p':
font->spacing = BDF_PROPORTIONAL;
break;
}
}
Fail:
_bdf_list_done( &list );
Exit:
return error;
}
/* Determine whether the property is an atom or not. If it is, then */
/* clean it up so the double quotes are removed if they exist. */
static int
_bdf_is_atom( char* line,
unsigned long linelen,
char** name,
char** value,
bdf_font_t* font )
{
int hold;
char *sp, *ep;
bdf_property_t* p;
*name = sp = ep = line;
while ( *ep && *ep != ' ' && *ep != '\t' )
ep++;
hold = -1;
if ( *ep )
{
hold = *ep;
*ep = 0;
}
p = bdf_get_property( sp, font );
/* Restore the character that was saved before any return can happen. */
if ( hold != -1 )
*ep = (char)hold;
/* If the property exists and is not an atom, just return here. */
if ( p && p->format != BDF_ATOM )
return 0;
/* The property is an atom. Trim all leading and trailing whitespace */
/* and double quotes for the atom value. */
sp = ep;
ep = line + linelen;
/* Trim the leading whitespace if it exists. */
if ( *sp )
*sp++ = 0;
while ( *sp &&
( *sp == ' ' || *sp == '\t' ) )
sp++;
/* Trim the leading double quote if it exists. */
if ( *sp == '"' )
sp++;
*value = sp;
/* Trim the trailing whitespace if it exists. */
while ( ep > sp &&
( *( ep - 1 ) == ' ' || *( ep - 1 ) == '\t' ) )
*--ep = 0;
/* Trim the trailing double quote if it exists. */
if ( ep > sp && *( ep - 1 ) == '"' )
*--ep = 0;
return 1;
}
static FT_Error
_bdf_add_property( bdf_font_t* font,
char* name,
char* value,
unsigned long lineno )
{
size_t propid;
hashnode hn;
bdf_property_t *prop, *fp;
FT_Memory memory = font->memory;
FT_Error error = BDF_Err_Ok;
/* First, check whether the property already exists in the font. */
if ( ( hn = hash_lookup( name, (hashtable *)font->internal ) ) != 0 )
{
/* The property already exists in the font, so simply replace */
/* the value of the property with the current value. */
fp = font->props + hn->data;
switch ( fp->format )
{
case BDF_ATOM:
/* Delete the current atom if it exists. */
FT_FREE( fp->value.atom );
if ( value && value[0] != 0 )
{
if ( FT_STRDUP( fp->value.atom, value ) )
goto Exit;
}
break;
case BDF_INTEGER:
fp->value.l = _bdf_atol( value, 0, 10 );
break;
case BDF_CARDINAL:
fp->value.ul = _bdf_atoul( value, 0, 10 );
break;
default:
;
}
goto Exit;
}
/* See whether this property type exists yet or not. */
/* If not, create it. */
hn = hash_lookup( name, &(font->proptbl) );
if ( hn == 0 )
{
error = bdf_create_property( name, BDF_ATOM, font );
if ( error )
goto Exit;
hn = hash_lookup( name, &(font->proptbl) );
}
/* Allocate another property if this is overflow. */
if ( font->props_used == font->props_size )
{
if ( font->props_size == 0 )
{
if ( FT_NEW_ARRAY( font->props, 1 ) )
goto Exit;
}
else
{
if ( FT_RENEW_ARRAY( font->props,
font->props_size,
font->props_size + 1 ) )
goto Exit;
}
fp = font->props + font->props_size;
FT_MEM_ZERO( fp, sizeof ( bdf_property_t ) );
font->props_size++;
}
propid = hn->data;
if ( propid >= _num_bdf_properties )
prop = font->user_props + ( propid - _num_bdf_properties );
else
prop = (bdf_property_t*)_bdf_properties + propid;
fp = font->props + font->props_used;
fp->name = prop->name;
fp->format = prop->format;
fp->builtin = prop->builtin;
switch ( prop->format )
{
case BDF_ATOM:
fp->value.atom = 0;
if ( value != 0 && value[0] )
{
if ( FT_STRDUP( fp->value.atom, value ) )
goto Exit;
}
break;
case BDF_INTEGER:
fp->value.l = _bdf_atol( value, 0, 10 );
break;
case BDF_CARDINAL:
fp->value.ul = _bdf_atoul( value, 0, 10 );
break;
}
/* If the property happens to be a comment, then it doesn't need */
/* to be added to the internal hash table. */
if ( ft_memcmp( name, "COMMENT", 7 ) != 0 )
{
/* Add the property to the font property table. */
error = hash_insert( fp->name,
font->props_used,
(hashtable *)font->internal,
memory );
if ( error )
goto Exit;
}
font->props_used++;
/* Some special cases need to be handled here. The DEFAULT_CHAR */
/* property needs to be located if it exists in the property list, the */
/* FONT_ASCENT and FONT_DESCENT need to be assigned if they are */
/* present, and the SPACING property should override the default */
/* spacing. */
if ( ft_memcmp( name, "DEFAULT_CHAR", 12 ) == 0 )
font->default_char = fp->value.l;
else if ( ft_memcmp( name, "FONT_ASCENT", 11 ) == 0 )
font->font_ascent = fp->value.l;
else if ( ft_memcmp( name, "FONT_DESCENT", 12 ) == 0 )
font->font_descent = fp->value.l;
else if ( ft_memcmp( name, "SPACING", 7 ) == 0 )
{
if ( !fp->value.atom )
{
FT_ERROR(( "_bdf_add_property: " ERRMSG8, lineno, "SPACING" ));
error = BDF_Err_Invalid_File_Format;
goto Exit;
}
if ( fp->value.atom[0] == 'p' || fp->value.atom[0] == 'P' )
font->spacing = BDF_PROPORTIONAL;
else if ( fp->value.atom[0] == 'm' || fp->value.atom[0] == 'M' )
font->spacing = BDF_MONOWIDTH;
else if ( fp->value.atom[0] == 'c' || fp->value.atom[0] == 'C' )
font->spacing = BDF_CHARCELL;
}
Exit:
return error;
}
static const unsigned char nibble_mask[8] =
{
0xFF, 0x80, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC, 0xFE
};
/* Actually parse the glyph info and bitmaps. */
static FT_Error
_bdf_parse_glyphs( char* line,
unsigned long linelen,
unsigned long lineno,
void* call_data,
void* client_data )
{
int c, mask_index;
char* s;
unsigned char* bp;
unsigned long i, slen, nibbles;
_bdf_parse_t* p;
bdf_glyph_t* glyph;
bdf_font_t* font;
FT_Memory memory;
FT_Error error = BDF_Err_Ok;
FT_UNUSED( call_data );
/* only used in debug mode */
FT_UNUSED( lineno );
p = (_bdf_parse_t *)client_data;
font = p->font;
memory = font->memory;
/* Check for a comment. */
if ( ft_memcmp( line, "COMMENT", 7 ) == 0 )
{
linelen -= 7;
s = line + 7;
if ( *s != 0 )
{
s++;
linelen--;
}
error = _bdf_add_comment( p->font, s, linelen );
goto Exit;
}
/* The very first thing expected is the number of glyphs. */
if ( !( p->flags & _BDF_GLYPHS ) )
{
if ( ft_memcmp( line, "CHARS", 5 ) != 0 )
{
FT_ERROR(( "_bdf_parse_glyphs: " ERRMSG1, lineno, "CHARS" ));
error = BDF_Err_Missing_Chars_Field;
goto Exit;
}
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
p->cnt = font->glyphs_size = _bdf_atoul( p->list.field[1], 0, 10 );
/* Make sure the number of glyphs is non-zero. */
if ( p->cnt == 0 )
font->glyphs_size = 64;
/* Limit ourselves to 1,114,112 glyphs in the font (this is the */
/* number of code points available in Unicode). */
if ( p->cnt >= 0x110000UL )
{
FT_ERROR(( "_bdf_parse_glyphs: " ERRMSG5, lineno, "CHARS" ));
error = BDF_Err_Invalid_Argument;
goto Exit;
}
if ( FT_NEW_ARRAY( font->glyphs, font->glyphs_size ) )
goto Exit;
p->flags |= _BDF_GLYPHS;
goto Exit;
}
/* Check for the ENDFONT field. */
if ( ft_memcmp( line, "ENDFONT", 7 ) == 0 )
{
/* Sort the glyphs by encoding. */
ft_qsort( (char *)font->glyphs,
font->glyphs_used,
sizeof ( bdf_glyph_t ),
by_encoding );
p->flags &= ~_BDF_START;
goto Exit;
}
/* Check for the ENDCHAR field. */
if ( ft_memcmp( line, "ENDCHAR", 7 ) == 0 )
{
p->glyph_enc = 0;
p->flags &= ~_BDF_GLYPH_BITS;
goto Exit;
}
/* Check whether a glyph is being scanned but should be */
/* ignored because it is an unencoded glyph. */
if ( ( p->flags & _BDF_GLYPH ) &&
p->glyph_enc == -1 &&
p->opts->keep_unencoded == 0 )
goto Exit;
/* Check for the STARTCHAR field. */
if ( ft_memcmp( line, "STARTCHAR", 9 ) == 0 )
{
/* Set the character name in the parse info first until the */
/* encoding can be checked for an unencoded character. */
FT_FREE( p->glyph_name );
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
_bdf_list_shift( &p->list, 1 );
s = _bdf_list_join( &p->list, ' ', &slen );
if ( !s )
{
FT_ERROR(( "_bdf_parse_glyphs: " ERRMSG8, lineno, "STARTCHAR" ));
error = BDF_Err_Invalid_File_Format;
goto Exit;
}
if ( FT_NEW_ARRAY( p->glyph_name, slen + 1 ) )
goto Exit;
FT_MEM_COPY( p->glyph_name, s, slen + 1 );
p->flags |= _BDF_GLYPH;
FT_TRACE4(( DBGMSG1, lineno, s ));
goto Exit;
}
/* Check for the ENCODING field. */
if ( ft_memcmp( line, "ENCODING", 8 ) == 0 )
{
if ( !( p->flags & _BDF_GLYPH ) )
{
/* Missing STARTCHAR field. */
FT_ERROR(( "_bdf_parse_glyphs: " ERRMSG1, lineno, "STARTCHAR" ));
error = BDF_Err_Missing_Startchar_Field;
goto Exit;
}
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
p->glyph_enc = _bdf_atol( p->list.field[1], 0, 10 );
/* Normalize negative encoding values. The specification only */
/* allows -1, but we can be more generous here. */
if ( p->glyph_enc < -1 )
p->glyph_enc = -1;
/* Check for alternative encoding format. */
if ( p->glyph_enc == -1 && p->list.used > 2 )
p->glyph_enc = _bdf_atol( p->list.field[2], 0, 10 );
if ( p->glyph_enc < -1 )
p->glyph_enc = -1;
FT_TRACE4(( DBGMSG2, p->glyph_enc ));
/* Check that the encoding is in the Unicode range because */
/* otherwise p->have (a bitmap with static size) overflows. */
if ( p->glyph_enc > 0 &&
(size_t)p->glyph_enc >= sizeof ( p->have ) /
sizeof ( unsigned long ) * 32 )
{
FT_ERROR(( "_bdf_parse_glyphs: " ERRMSG5, lineno, "ENCODING" ));
error = BDF_Err_Invalid_File_Format;
goto Exit;
}
/* Check whether this encoding has already been encountered. */
/* If it has then change it to unencoded so it gets added if */
/* indicated. */
if ( p->glyph_enc >= 0 )
{
if ( _bdf_glyph_modified( p->have, p->glyph_enc ) )
{
/* Emit a message saying a glyph has been moved to the */
/* unencoded area. */
FT_TRACE2(( "_bdf_parse_glyphs: " ACMSG12,
p->glyph_enc, p->glyph_name ));
p->glyph_enc = -1;
font->modified = 1;
}
else
_bdf_set_glyph_modified( p->have, p->glyph_enc );
}
if ( p->glyph_enc >= 0 )
{
/* Make sure there are enough glyphs allocated in case the */
/* number of characters happen to be wrong. */
if ( font->glyphs_used == font->glyphs_size )
{
if ( FT_RENEW_ARRAY( font->glyphs,
font->glyphs_size,
font->glyphs_size + 64 ) )
goto Exit;
font->glyphs_size += 64;
}
glyph = font->glyphs + font->glyphs_used++;
glyph->name = p->glyph_name;
glyph->encoding = p->glyph_enc;
/* Reset the initial glyph info. */
p->glyph_name = 0;
}
else
{
/* Unencoded glyph. Check whether it should */
/* be added or not. */
if ( p->opts->keep_unencoded != 0 )
{
/* Allocate the next unencoded glyph. */
if ( font->unencoded_used == font->unencoded_size )
{
if ( FT_RENEW_ARRAY( font->unencoded ,
font->unencoded_size,
font->unencoded_size + 4 ) )
goto Exit;
font->unencoded_size += 4;
}
glyph = font->unencoded + font->unencoded_used;
glyph->name = p->glyph_name;
glyph->encoding = font->unencoded_used++;
}
else
/* Free up the glyph name if the unencoded shouldn't be */
/* kept. */
FT_FREE( p->glyph_name );
p->glyph_name = 0;
}
/* Clear the flags that might be added when width and height are */
/* checked for consistency. */
p->flags &= ~( _BDF_GLYPH_WIDTH_CHECK | _BDF_GLYPH_HEIGHT_CHECK );
p->flags |= _BDF_ENCODING;
goto Exit;
}
/* Point at the glyph being constructed. */
if ( p->glyph_enc == -1 )
glyph = font->unencoded + ( font->unencoded_used - 1 );
else
glyph = font->glyphs + ( font->glyphs_used - 1 );
/* Check whether a bitmap is being constructed. */
if ( p->flags & _BDF_BITMAP )
{
/* If there are more rows than are specified in the glyph metrics, */
/* ignore the remaining lines. */
if ( p->row >= (unsigned long)glyph->bbx.height )
{
if ( !( p->flags & _BDF_GLYPH_HEIGHT_CHECK ) )
{
FT_TRACE2(( "_bdf_parse_glyphs: " ACMSG13, glyph->encoding ));
p->flags |= _BDF_GLYPH_HEIGHT_CHECK;
font->modified = 1;
}
goto Exit;
}
/* Only collect the number of nibbles indicated by the glyph */
/* metrics. If there are more columns, they are simply ignored. */
nibbles = glyph->bpr << 1;
bp = glyph->bitmap + p->row * glyph->bpr;
for ( i = 0; i < nibbles; i++ )
{
c = line[i];
if ( !sbitset( hdigits, c ) )
break;
*bp = (FT_Byte)( ( *bp << 4 ) + a2i[c] );
if ( i + 1 < nibbles && ( i & 1 ) )
*++bp = 0;
}
/* If any line has not enough columns, */
/* indicate they have been padded with zero bits. */
if ( i < nibbles &&
!( p->flags & _BDF_GLYPH_WIDTH_CHECK ) )
{
FT_TRACE2(( "_bdf_parse_glyphs: " ACMSG16, glyph->encoding ));
p->flags |= _BDF_GLYPH_WIDTH_CHECK;
font->modified = 1;
}
/* Remove possible garbage at the right. */
mask_index = ( glyph->bbx.width * p->font->bpp ) & 7;
if ( glyph->bbx.width )
*bp &= nibble_mask[mask_index];
/* If any line has extra columns, indicate they have been removed. */
if ( i == nibbles &&
sbitset( hdigits, line[nibbles] ) &&
!( p->flags & _BDF_GLYPH_WIDTH_CHECK ) )
{
FT_TRACE2(( "_bdf_parse_glyphs: " ACMSG14, glyph->encoding ));
p->flags |= _BDF_GLYPH_WIDTH_CHECK;
font->modified = 1;
}
p->row++;
goto Exit;
}
/* Expect the SWIDTH (scalable width) field next. */
if ( ft_memcmp( line, "SWIDTH", 6 ) == 0 )
{
if ( !( p->flags & _BDF_ENCODING ) )
goto Missing_Encoding;
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
glyph->swidth = (unsigned short)_bdf_atoul( p->list.field[1], 0, 10 );
p->flags |= _BDF_SWIDTH;
goto Exit;
}
/* Expect the DWIDTH (scalable width) field next. */
if ( ft_memcmp( line, "DWIDTH", 6 ) == 0 )
{
if ( !( p->flags & _BDF_ENCODING ) )
goto Missing_Encoding;
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
glyph->dwidth = (unsigned short)_bdf_atoul( p->list.field[1], 0, 10 );
if ( !( p->flags & _BDF_SWIDTH ) )
{
/* Missing SWIDTH field. Emit an auto correction message and set */
/* the scalable width from the device width. */
FT_TRACE2(( "_bdf_parse_glyphs: " ACMSG9, lineno ));
glyph->swidth = (unsigned short)FT_MulDiv(
glyph->dwidth, 72000L,
(FT_Long)( font->point_size *
font->resolution_x ) );
}
p->flags |= _BDF_DWIDTH;
goto Exit;
}
/* Expect the BBX field next. */
if ( ft_memcmp( line, "BBX", 3 ) == 0 )
{
if ( !( p->flags & _BDF_ENCODING ) )
goto Missing_Encoding;
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
glyph->bbx.width = _bdf_atos( p->list.field[1], 0, 10 );
glyph->bbx.height = _bdf_atos( p->list.field[2], 0, 10 );
glyph->bbx.x_offset = _bdf_atos( p->list.field[3], 0, 10 );
glyph->bbx.y_offset = _bdf_atos( p->list.field[4], 0, 10 );
/* Generate the ascent and descent of the character. */
glyph->bbx.ascent = (short)( glyph->bbx.height + glyph->bbx.y_offset );
glyph->bbx.descent = (short)( -glyph->bbx.y_offset );
/* Determine the overall font bounding box as the characters are */
/* loaded so corrections can be done later if indicated. */
p->maxas = (short)FT_MAX( glyph->bbx.ascent, p->maxas );
p->maxds = (short)FT_MAX( glyph->bbx.descent, p->maxds );
p->rbearing = (short)( glyph->bbx.width + glyph->bbx.x_offset );
p->maxrb = (short)FT_MAX( p->rbearing, p->maxrb );
p->minlb = (short)FT_MIN( glyph->bbx.x_offset, p->minlb );
p->maxlb = (short)FT_MAX( glyph->bbx.x_offset, p->maxlb );
if ( !( p->flags & _BDF_DWIDTH ) )
{
/* Missing DWIDTH field. Emit an auto correction message and set */
/* the device width to the glyph width. */
FT_TRACE2(( "_bdf_parse_glyphs: " ACMSG10, lineno ));
glyph->dwidth = glyph->bbx.width;
}
/* If the BDF_CORRECT_METRICS flag is set, then adjust the SWIDTH */
/* value if necessary. */
if ( p->opts->correct_metrics != 0 )
{
/* Determine the point size of the glyph. */
unsigned short sw = (unsigned short)FT_MulDiv(
glyph->dwidth, 72000L,
(FT_Long)( font->point_size *
font->resolution_x ) );
if ( sw != glyph->swidth )
{
glyph->swidth = sw;
if ( p->glyph_enc == -1 )
_bdf_set_glyph_modified( font->umod,
font->unencoded_used - 1 );
else
_bdf_set_glyph_modified( font->nmod, glyph->encoding );
p->flags |= _BDF_SWIDTH_ADJ;
font->modified = 1;
}
}
p->flags |= _BDF_BBX;
goto Exit;
}
/* And finally, gather up the bitmap. */
if ( ft_memcmp( line, "BITMAP", 6 ) == 0 )
{
unsigned long bitmap_size;
if ( !( p->flags & _BDF_BBX ) )
{
/* Missing BBX field. */
FT_ERROR(( "_bdf_parse_glyphs: " ERRMSG1, lineno, "BBX" ));
error = BDF_Err_Missing_Bbx_Field;
goto Exit;
}
/* Allocate enough space for the bitmap. */
glyph->bpr = ( glyph->bbx.width * p->font->bpp + 7 ) >> 3;
bitmap_size = glyph->bpr * glyph->bbx.height;
if ( glyph->bpr > 0xFFFFU || bitmap_size > 0xFFFFU )
{
FT_ERROR(( "_bdf_parse_glyphs: " ERRMSG4, lineno ));
error = BDF_Err_Bbx_Too_Big;
goto Exit;
}
else
glyph->bytes = (unsigned short)bitmap_size;
if ( FT_NEW_ARRAY( glyph->bitmap, glyph->bytes ) )
goto Exit;
p->row = 0;
p->flags |= _BDF_BITMAP;
goto Exit;
}
FT_ERROR(( "_bdf_parse_glyphs: " ERRMSG9, lineno ));
error = BDF_Err_Invalid_File_Format;
goto Exit;
Missing_Encoding:
/* Missing ENCODING field. */
FT_ERROR(( "_bdf_parse_glyphs: " ERRMSG1, lineno, "ENCODING" ));
error = BDF_Err_Missing_Encoding_Field;
Exit:
if ( error && ( p->flags & _BDF_GLYPH ) )
FT_FREE( p->glyph_name );
return error;
}
/* Load the font properties. */
static FT_Error
_bdf_parse_properties( char* line,
unsigned long linelen,
unsigned long lineno,
void* call_data,
void* client_data )
{
unsigned long vlen;
_bdf_line_func_t* next;
_bdf_parse_t* p;
char* name;
char* value;
char nbuf[128];
FT_Error error = BDF_Err_Ok;
FT_UNUSED( lineno );
next = (_bdf_line_func_t *)call_data;
p = (_bdf_parse_t *) client_data;
/* Check for the end of the properties. */
if ( ft_memcmp( line, "ENDPROPERTIES", 13 ) == 0 )
{
/* If the FONT_ASCENT or FONT_DESCENT properties have not been */
/* encountered yet, then make sure they are added as properties and */
/* make sure they are set from the font bounding box info. */
/* */
/* This is *always* done regardless of the options, because X11 */
/* requires these two fields to compile fonts. */
if ( bdf_get_font_property( p->font, "FONT_ASCENT" ) == 0 )
{
p->font->font_ascent = p->font->bbx.ascent;
ft_sprintf( nbuf, "%hd", p->font->bbx.ascent );
error = _bdf_add_property( p->font, (char *)"FONT_ASCENT",
nbuf, lineno );
if ( error )
goto Exit;
FT_TRACE2(( "_bdf_parse_properties: " ACMSG1, p->font->bbx.ascent ));
p->font->modified = 1;
}
if ( bdf_get_font_property( p->font, "FONT_DESCENT" ) == 0 )
{
p->font->font_descent = p->font->bbx.descent;
ft_sprintf( nbuf, "%hd", p->font->bbx.descent );
error = _bdf_add_property( p->font, (char *)"FONT_DESCENT",
nbuf, lineno );
if ( error )
goto Exit;
FT_TRACE2(( "_bdf_parse_properties: " ACMSG2, p->font->bbx.descent ));
p->font->modified = 1;
}
p->flags &= ~_BDF_PROPS;
*next = _bdf_parse_glyphs;
goto Exit;
}
/* Ignore the _XFREE86_GLYPH_RANGES properties. */
if ( ft_memcmp( line, "_XFREE86_GLYPH_RANGES", 21 ) == 0 )
goto Exit;
/* Handle COMMENT fields and properties in a special way to preserve */
/* the spacing. */
if ( ft_memcmp( line, "COMMENT", 7 ) == 0 )
{
name = value = line;
value += 7;
if ( *value )
*value++ = 0;
error = _bdf_add_property( p->font, name, value, lineno );
if ( error )
goto Exit;
}
else if ( _bdf_is_atom( line, linelen, &name, &value, p->font ) )
{
error = _bdf_add_property( p->font, name, value, lineno );
if ( error )
goto Exit;
}
else
{
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
name = p->list.field[0];
_bdf_list_shift( &p->list, 1 );
value = _bdf_list_join( &p->list, ' ', &vlen );
error = _bdf_add_property( p->font, name, value, lineno );
if ( error )
goto Exit;
}
Exit:
return error;
}
/* Load the font header. */
static FT_Error
_bdf_parse_start( char* line,
unsigned long linelen,
unsigned long lineno,
void* call_data,
void* client_data )
{
unsigned long slen;
_bdf_line_func_t* next;
_bdf_parse_t* p;
bdf_font_t* font;
char *s;
FT_Memory memory = NULL;
FT_Error error = BDF_Err_Ok;
/* only used in debug mode */
FT_UNUSED( lineno );
next = (_bdf_line_func_t *)call_data;
p = (_bdf_parse_t *) client_data;
if ( p->font )
memory = p->font->memory;
/* Check for a comment. This is done to handle those fonts that have */
/* comments before the STARTFONT line for some reason. */
if ( ft_memcmp( line, "COMMENT", 7 ) == 0 )
{
if ( p->opts->keep_comments != 0 && p->font != 0 )
{
linelen -= 7;
s = line + 7;
if ( *s != 0 )
{
s++;
linelen--;
}
error = _bdf_add_comment( p->font, s, linelen );
if ( error )
goto Exit;
/* here font is not defined! */
}
goto Exit;
}
if ( !( p->flags & _BDF_START ) )
{
memory = p->memory;
if ( ft_memcmp( line, "STARTFONT", 9 ) != 0 )
{
/* we don't emit an error message since this code gets */
/* explicitly caught one level higher */
error = BDF_Err_Missing_Startfont_Field;
goto Exit;
}
p->flags = _BDF_START;
font = p->font = 0;
if ( FT_NEW( font ) )
goto Exit;
p->font = font;
font->memory = p->memory;
p->memory = 0;
/* setup */
{
size_t i;
bdf_property_t* prop;
error = hash_init( &(font->proptbl), memory );
if ( error )
goto Exit;
for ( i = 0, prop = (bdf_property_t*)_bdf_properties;
i < _num_bdf_properties; i++, prop++ )
{
error = hash_insert( prop->name, i,
&(font->proptbl), memory );
if ( error )
goto Exit;
}
}
if ( FT_ALLOC( p->font->internal, sizeof ( hashtable ) ) )
goto Exit;
error = hash_init( (hashtable *)p->font->internal,memory );
if ( error )
goto Exit;
p->font->spacing = p->opts->font_spacing;
p->font->default_char = -1;
goto Exit;
}
/* Check for the start of the properties. */
if ( ft_memcmp( line, "STARTPROPERTIES", 15 ) == 0 )
{
if ( !( p->flags & _BDF_FONT_BBX ) )
{
/* Missing the FONTBOUNDINGBOX field. */
FT_ERROR(( "_bdf_parse_start: " ERRMSG1, lineno, "FONTBOUNDINGBOX" ));
error = BDF_Err_Missing_Fontboundingbox_Field;
goto Exit;
}
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
/* at this point, `p->font' can't be NULL */
p->cnt = p->font->props_size = _bdf_atoul( p->list.field[1], 0, 10 );
if ( FT_NEW_ARRAY( p->font->props, p->cnt ) )
{
p->font->props_size = 0;
goto Exit;
}
p->flags |= _BDF_PROPS;
*next = _bdf_parse_properties;
goto Exit;
}
/* Check for the FONTBOUNDINGBOX field. */
if ( ft_memcmp( line, "FONTBOUNDINGBOX", 15 ) == 0 )
{
if ( !( p->flags & _BDF_SIZE ) )
{
/* Missing the SIZE field. */
FT_ERROR(( "_bdf_parse_start: " ERRMSG1, lineno, "SIZE" ));
error = BDF_Err_Missing_Size_Field;
goto Exit;
}
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
p->font->bbx.width = _bdf_atos( p->list.field[1], 0, 10 );
p->font->bbx.height = _bdf_atos( p->list.field[2], 0, 10 );
p->font->bbx.x_offset = _bdf_atos( p->list.field[3], 0, 10 );
p->font->bbx.y_offset = _bdf_atos( p->list.field[4], 0, 10 );
p->font->bbx.ascent = (short)( p->font->bbx.height +
p->font->bbx.y_offset );
p->font->bbx.descent = (short)( -p->font->bbx.y_offset );
p->flags |= _BDF_FONT_BBX;
goto Exit;
}
/* The next thing to check for is the FONT field. */
if ( ft_memcmp( line, "FONT", 4 ) == 0 )
{
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
_bdf_list_shift( &p->list, 1 );
s = _bdf_list_join( &p->list, ' ', &slen );
if ( !s )
{
FT_ERROR(( "_bdf_parse_start: " ERRMSG8, lineno, "FONT" ));
error = BDF_Err_Invalid_File_Format;
goto Exit;
}
/* Allowing multiple `FONT' lines (which is invalid) doesn't hurt... */
FT_FREE( p->font->name );
if ( FT_NEW_ARRAY( p->font->name, slen + 1 ) )
goto Exit;
FT_MEM_COPY( p->font->name, s, slen + 1 );
/* If the font name is an XLFD name, set the spacing to the one in */
/* the font name. If there is no spacing fall back on the default. */
error = _bdf_set_default_spacing( p->font, p->opts, lineno );
if ( error )
goto Exit;
p->flags |= _BDF_FONT_NAME;
goto Exit;
}
/* Check for the SIZE field. */
if ( ft_memcmp( line, "SIZE", 4 ) == 0 )
{
if ( !( p->flags & _BDF_FONT_NAME ) )
{
/* Missing the FONT field. */
FT_ERROR(( "_bdf_parse_start: " ERRMSG1, lineno, "FONT" ));
error = BDF_Err_Missing_Font_Field;
goto Exit;
}
error = _bdf_list_split( &p->list, (char *)" +", line, linelen );
if ( error )
goto Exit;
p->font->point_size = _bdf_atoul( p->list.field[1], 0, 10 );
p->font->resolution_x = _bdf_atoul( p->list.field[2], 0, 10 );
p->font->resolution_y = _bdf_atoul( p->list.field[3], 0, 10 );
/* Check for the bits per pixel field. */
if ( p->list.used == 5 )
{
unsigned short bitcount, i, shift;
p->font->bpp = (unsigned short)_bdf_atos( p->list.field[4], 0, 10 );
/* Only values 1, 2, 4, 8 are allowed. */
shift = p->font->bpp;
bitcount = 0;
for ( i = 0; shift > 0; i++ )
{
if ( shift & 1 )
bitcount = i;
shift >>= 1;
}
shift = (short)( ( bitcount > 3 ) ? 8 : ( 1 << bitcount ) );
if ( p->font->bpp > shift || p->font->bpp != shift )
{
/* select next higher value */
p->font->bpp = (unsigned short)( shift << 1 );
FT_TRACE2(( "_bdf_parse_start: " ACMSG11, p->font->bpp ));
}
}
else
p->font->bpp = 1;
p->flags |= _BDF_SIZE;
goto Exit;
}
/* Check for the CHARS field -- font properties are optional */
if ( ft_memcmp( line, "CHARS", 5 ) == 0 )
{
char nbuf[128];
if ( !( p->flags & _BDF_FONT_BBX ) )
{
/* Missing the FONTBOUNDINGBOX field. */
FT_ERROR(( "_bdf_parse_start: " ERRMSG1, lineno, "FONTBOUNDINGBOX" ));
error = BDF_Err_Missing_Fontboundingbox_Field;
goto Exit;
}
/* Add the two standard X11 properties which are required */
/* for compiling fonts. */
p->font->font_ascent = p->font->bbx.ascent;
ft_sprintf( nbuf, "%hd", p->font->bbx.ascent );
error = _bdf_add_property( p->font, (char *)"FONT_ASCENT",
nbuf, lineno );
if ( error )
goto Exit;
FT_TRACE2(( "_bdf_parse_properties: " ACMSG1, p->font->bbx.ascent ));
p->font->font_descent = p->font->bbx.descent;
ft_sprintf( nbuf, "%hd", p->font->bbx.descent );
error = _bdf_add_property( p->font, (char *)"FONT_DESCENT",
nbuf, lineno );
if ( error )
goto Exit;
FT_TRACE2(( "_bdf_parse_properties: " ACMSG2, p->font->bbx.descent ));
p->font->modified = 1;
*next = _bdf_parse_glyphs;
/* A special return value. */
error = -1;
goto Exit;
}
FT_ERROR(( "_bdf_parse_start: " ERRMSG9, lineno ));
error = BDF_Err_Invalid_File_Format;
Exit:
return error;
}
/*************************************************************************/
/* */
/* API. */
/* */
/*************************************************************************/
FT_LOCAL_DEF( FT_Error )
bdf_load_font( FT_Stream stream,
FT_Memory extmemory,
bdf_options_t* opts,
bdf_font_t* *font )
{
/* make compiler happy */
unsigned long lineno = 0;
_bdf_parse_t *p = NULL;
FT_Memory memory = extmemory;
FT_Error error = BDF_Err_Ok;
if ( FT_NEW( p ) )
goto Exit;
memory = NULL;
p->opts = (bdf_options_t*)( ( opts != 0 ) ? opts : &_bdf_opts );
p->minlb = 32767;
/* only during font creation */
p->memory = extmemory;
_bdf_list_init( &p->list, extmemory );
error = _bdf_readstream( stream, _bdf_parse_start,
(void *)p, &lineno );
if ( error )
goto Fail;
if ( p->font != 0 )
{
/* If the font is not proportional, set the font's monowidth */
/* field to the width of the font bounding box. */
memory = p->font->memory;
if ( p->font->spacing != BDF_PROPORTIONAL )
p->font->monowidth = p->font->bbx.width;
/* If the number of glyphs loaded is not that of the original count, */
/* indicate the difference. */
if ( p->cnt != p->font->glyphs_used + p->font->unencoded_used )
{
FT_TRACE2(( "bdf_load_font: " ACMSG15, p->cnt,
p->font->glyphs_used + p->font->unencoded_used ));
p->font->modified = 1;
}
/* Once the font has been loaded, adjust the overall font metrics if */
/* necessary. */
if ( p->opts->correct_metrics != 0 &&
( p->font->glyphs_used > 0 || p->font->unencoded_used > 0 ) )
{
if ( p->maxrb - p->minlb != p->font->bbx.width )
{
FT_TRACE2(( "bdf_load_font: " ACMSG3,
p->font->bbx.width, p->maxrb - p->minlb ));
p->font->bbx.width = (unsigned short)( p->maxrb - p->minlb );
p->font->modified = 1;
}
if ( p->font->bbx.x_offset != p->minlb )
{
FT_TRACE2(( "bdf_load_font: " ACMSG4,
p->font->bbx.x_offset, p->minlb ));
p->font->bbx.x_offset = p->minlb;
p->font->modified = 1;
}
if ( p->font->bbx.ascent != p->maxas )
{
FT_TRACE2(( "bdf_load_font: " ACMSG5,
p->font->bbx.ascent, p->maxas ));
p->font->bbx.ascent = p->maxas;
p->font->modified = 1;
}
if ( p->font->bbx.descent != p->maxds )
{
FT_TRACE2(( "bdf_load_font: " ACMSG6,
p->font->bbx.descent, p->maxds ));
p->font->bbx.descent = p->maxds;
p->font->bbx.y_offset = (short)( -p->maxds );
p->font->modified = 1;
}
if ( p->maxas + p->maxds != p->font->bbx.height )
{
FT_TRACE2(( "bdf_load_font: " ACMSG7,
p->font->bbx.height, p->maxas + p->maxds ));
p->font->bbx.height = (unsigned short)( p->maxas + p->maxds );
}
if ( p->flags & _BDF_SWIDTH_ADJ )
FT_TRACE2(( "bdf_load_font: " ACMSG8 ));
}
}
if ( p->flags & _BDF_START )
{
/* The ENDFONT field was never reached or did not exist. */
if ( !( p->flags & _BDF_GLYPHS ) )
{
/* Error happened while parsing header. */
FT_ERROR(( "bdf_load_font: " ERRMSG2, lineno ));
error = BDF_Err_Corrupted_Font_Header;
goto Exit;
}
else
{
/* Error happened when parsing glyphs. */
FT_ERROR(( "bdf_load_font: " ERRMSG3, lineno ));
error = BDF_Err_Corrupted_Font_Glyphs;
goto Exit;
}
}
if ( p->font != 0 )
{
/* Make sure the comments are NULL terminated if they exist. */
memory = p->font->memory;
if ( p->font->comments_len > 0 )
{
if ( FT_RENEW_ARRAY( p->font->comments,
p->font->comments_len,
p->font->comments_len + 1 ) )
goto Fail;
p->font->comments[p->font->comments_len] = 0;
}
}
else if ( error == BDF_Err_Ok )
error = BDF_Err_Invalid_File_Format;
*font = p->font;
Exit:
if ( p )
{
_bdf_list_done( &p->list );
memory = extmemory;
FT_FREE( p );
}
return error;
Fail:
bdf_free_font( p->font );
memory = extmemory;
FT_FREE( p->font );
goto Exit;
}
FT_LOCAL_DEF( void )
bdf_free_font( bdf_font_t* font )
{
bdf_property_t* prop;
unsigned long i;
bdf_glyph_t* glyphs;
FT_Memory memory;
if ( font == 0 )
return;
memory = font->memory;
FT_FREE( font->name );
/* Free up the internal hash table of property names. */
if ( font->internal )
{
hash_free( (hashtable *)font->internal, memory );
FT_FREE( font->internal );
}
/* Free up the comment info. */
FT_FREE( font->comments );
/* Free up the properties. */
for ( i = 0; i < font->props_size; i++ )
{
if ( font->props[i].format == BDF_ATOM )
FT_FREE( font->props[i].value.atom );
}
FT_FREE( font->props );
/* Free up the character info. */
for ( i = 0, glyphs = font->glyphs;
i < font->glyphs_used; i++, glyphs++ )
{
FT_FREE( glyphs->name );
FT_FREE( glyphs->bitmap );
}
for ( i = 0, glyphs = font->unencoded; i < font->unencoded_used;
i++, glyphs++ )
{
FT_FREE( glyphs->name );
FT_FREE( glyphs->bitmap );
}
FT_FREE( font->glyphs );
FT_FREE( font->unencoded );
/* Free up the overflow storage if it was used. */
for ( i = 0, glyphs = font->overflow.glyphs;
i < font->overflow.glyphs_used; i++, glyphs++ )
{
FT_FREE( glyphs->name );
FT_FREE( glyphs->bitmap );
}
FT_FREE( font->overflow.glyphs );
/* bdf_cleanup */
hash_free( &(font->proptbl), memory );
/* Free up the user defined properties. */
for ( prop = font->user_props, i = 0;
i < font->nuser_props; i++, prop++ )
{
FT_FREE( prop->name );
if ( prop->format == BDF_ATOM )
FT_FREE( prop->value.atom );
}
FT_FREE( font->user_props );
/* FREE( font ); *//* XXX Fixme */
}
FT_LOCAL_DEF( bdf_property_t * )
bdf_get_font_property( bdf_font_t* font,
const char* name )
{
hashnode hn;
if ( font == 0 || font->props_size == 0 || name == 0 || *name == 0 )
return 0;
hn = hash_lookup( name, (hashtable *)font->internal );
return hn ? ( font->props + hn->data ) : 0;
}
/* END */
/* bdfdrivr.c
FreeType font driver for bdf files
Copyright (C) 2001-2008, 2011 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
/* bdfdrivr.h
FreeType font driver for bdf fonts
Copyright (C) 2001, 2002, 2003, 2004 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
#define __BDFDRIVR_H__
FT_BEGIN_HEADER
typedef struct BDF_encoding_el_
{
FT_ULong enc;
FT_UShort glyph;
} BDF_encoding_el;
typedef struct BDF_FaceRec_
{
FT_FaceRec root;
char* charset_encoding;
char* charset_registry;
bdf_font_t* bdffont;
BDF_encoding_el* en_table;
FT_CharMap charmap_handle;
/* a single charmap per face */
FT_CharMapRec charmap;
FT_UInt default_glyph;
} BDF_FaceRec, *BDF_Face;
FT_EXPORT_VAR( const FT_Driver_ClassRec ) bdf_driver_class;
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_bdfdriver
typedef struct BDF_CMapRec_
{
FT_CMapRec cmap;
/* ftobjs.h: FT_CMap->clazz->size */
FT_ULong num_encodings;
BDF_encoding_el* encodings;
} BDF_CMapRec, *BDF_CMap;
FT_CALLBACK_DEF( FT_Error )
bdf_cmap_init( FT_CMap bdfcmap,
FT_Pointer init_data )
{
BDF_CMap cmap = (BDF_CMap)bdfcmap;
BDF_Face face = (BDF_Face)FT_CMAP_FACE( cmap );
FT_UNUSED( init_data );
cmap->num_encodings = face->bdffont->glyphs_used;
cmap->encodings = face->en_table;
return BDF_Err_Ok;
}
FT_CALLBACK_DEF( void )
bdf_cmap_done( FT_CMap bdfcmap )
{
BDF_CMap cmap = (BDF_CMap)bdfcmap;
cmap->encodings = NULL;
cmap->num_encodings = 0;
}
FT_CALLBACK_DEF( FT_UInt )
bdf_cmap_char_index( FT_CMap bdfcmap,
FT_UInt32 charcode )
{
BDF_CMap cmap = (BDF_CMap)bdfcmap;
BDF_encoding_el* encodings = cmap->encodings;
/* num_encodings */
FT_ULong min, max, mid;
/* encodings->glyph */
FT_UShort result = 0;
min = 0;
max = cmap->num_encodings;
while ( min < max )
{
FT_ULong code;
mid = ( min + max ) >> 1;
code = encodings[mid].enc;
if ( charcode == code )
{
/* increase glyph index by 1 -- */
/* we reserve slot 0 for the undefined glyph */
result = encodings[mid].glyph + 1;
break;
}
if ( charcode < code )
max = mid;
else
min = mid + 1;
}
return result;
}
FT_CALLBACK_DEF( FT_UInt )
bdf_cmap_char_next( FT_CMap bdfcmap,
FT_UInt32 *acharcode )
{
BDF_CMap cmap = (BDF_CMap)bdfcmap;
BDF_encoding_el* encodings = cmap->encodings;
/* num_encodings */
FT_ULong min, max, mid;
/* encodings->glyph */
FT_UShort result = 0;
FT_ULong charcode = *acharcode + 1;
min = 0;
max = cmap->num_encodings;
while ( min < max )
{
/* same as BDF_encoding_el.enc */
FT_ULong code;
mid = ( min + max ) >> 1;
code = encodings[mid].enc;
if ( charcode == code )
{
/* increase glyph index by 1 -- */
/* we reserve slot 0 for the undefined glyph */
result = encodings[mid].glyph + 1;
goto Exit;
}
if ( charcode < code )
max = mid;
else
min = mid + 1;
}
charcode = 0;
if ( min < cmap->num_encodings )
{
charcode = encodings[min].enc;
result = encodings[min].glyph + 1;
}
Exit:
if ( charcode > 0xFFFFFFFFUL )
{
FT_TRACE1(( "bdf_cmap_char_next: charcode 0x%x > 32bit API" ));
*acharcode = 0;
/* XXX: result should be changed to indicate an overflow error */
}
else
*acharcode = (FT_UInt32)charcode;
return result;
}
FT_CALLBACK_TABLE_DEF
const FT_CMap_ClassRec bdf_cmap_class =
{
sizeof ( BDF_CMapRec ),
bdf_cmap_init,
bdf_cmap_done,
bdf_cmap_char_index,
bdf_cmap_char_next,
NULL, NULL, NULL, NULL, NULL
};
static FT_Error
bdf_interpret_style( BDF_Face bdf )
{
FT_Error error = BDF_Err_Ok;
FT_Face face = FT_FACE( bdf );
FT_Memory memory = face->memory;
bdf_font_t* font = bdf->bdffont;
bdf_property_t* prop;
char* strings[4] = { NULL, NULL, NULL, NULL };
size_t nn, len, lengths[4];
face->style_flags = 0;
prop = bdf_get_font_property( font, (char *)"SLANT" );
if ( prop && prop->format == BDF_ATOM &&
prop->value.atom &&
( *(prop->value.atom) == 'O' || *(prop->value.atom) == 'o' ||
*(prop->value.atom) == 'I' || *(prop->value.atom) == 'i' ) )
{
face->style_flags |= FT_STYLE_FLAG_ITALIC;
strings[2] = ( *(prop->value.atom) == 'O' || *(prop->value.atom) == 'o' )
? (char *)"Oblique"
: (char *)"Italic";
}
prop = bdf_get_font_property( font, (char *)"WEIGHT_NAME" );
if ( prop && prop->format == BDF_ATOM &&
prop->value.atom &&
( *(prop->value.atom) == 'B' || *(prop->value.atom) == 'b' ) )
{
face->style_flags |= FT_STYLE_FLAG_BOLD;
strings[1] = (char *)"Bold";
}
prop = bdf_get_font_property( font, (char *)"SETWIDTH_NAME" );
if ( prop && prop->format == BDF_ATOM &&
prop->value.atom && *(prop->value.atom) &&
!( *(prop->value.atom) == 'N' || *(prop->value.atom) == 'n' ) )
strings[3] = (char *)(prop->value.atom);
prop = bdf_get_font_property( font, (char *)"ADD_STYLE_NAME" );
if ( prop && prop->format == BDF_ATOM &&
prop->value.atom && *(prop->value.atom) &&
!( *(prop->value.atom) == 'N' || *(prop->value.atom) == 'n' ) )
strings[0] = (char *)(prop->value.atom);
len = 0;
for ( len = 0, nn = 0; nn < 4; nn++ )
{
lengths[nn] = 0;
if ( strings[nn] )
{
lengths[nn] = ft_strlen( strings[nn] );
len += lengths[nn] + 1;
}
}
if ( len == 0 )
{
strings[0] = (char *)"Regular";
lengths[0] = ft_strlen( strings[0] );
len = lengths[0] + 1;
}
{
char* s;
if ( FT_ALLOC( face->style_name, len ) )
return error;
s = face->style_name;
for ( nn = 0; nn < 4; nn++ )
{
char* src = strings[nn];
len = lengths[nn];
if ( src == NULL )
continue;
/* separate elements with a space */
if ( s != face->style_name )
*s++ = ' ';
ft_memcpy( s, src, len );
/* need to convert spaces to dashes for */
/* add_style_name and setwidth_name */
if ( nn == 0 || nn == 3 )
{
size_t mm;
for ( mm = 0; mm < len; mm++ )
if ( s[mm] == ' ' )
s[mm] = '-';
}
s += len;
}
*s = 0;
}
return error;
}
FT_CALLBACK_DEF( void )
/* BDF_Face */
BDF_Face_Done( FT_Face bdfface )
{
BDF_Face face = (BDF_Face)bdfface;
FT_Memory memory;
if ( !face )
return;
memory = FT_FACE_MEMORY( face );
bdf_free_font( face->bdffont );
FT_FREE( face->en_table );
FT_FREE( face->charset_encoding );
FT_FREE( face->charset_registry );
FT_FREE( bdfface->family_name );
FT_FREE( bdfface->style_name );
FT_FREE( bdfface->available_sizes );
FT_FREE( face->bdffont );
}
FT_CALLBACK_DEF( FT_Error )
BDF_Face_Init( FT_Stream stream,
/* BDF_Face */
FT_Face bdfface,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
FT_Error error = BDF_Err_Ok;
BDF_Face face = (BDF_Face)bdfface;
FT_Memory memory = FT_FACE_MEMORY( face );
bdf_font_t* font = NULL;
bdf_options_t options;
FT_UNUSED( num_params );
FT_UNUSED( params );
FT_UNUSED( face_index );
FT_TRACE2(( "BDF driver\n" ));
if ( FT_STREAM_SEEK( 0 ) )
goto Exit;
/* FZ XXX: options semantics */
options.correct_metrics = 1;
options.keep_unencoded = 1;
options.keep_comments = 0;
options.font_spacing = BDF_PROPORTIONAL;
error = bdf_load_font( stream, memory, &options, &font );
if ( error == BDF_Err_Missing_Startfont_Field )
{
FT_TRACE2(( " not a BDF file\n" ));
goto Fail;
}
else if ( error )
goto Exit;
/* we have a bdf font: let's construct the face object */
face->bdffont = font;
{
bdf_property_t* prop = NULL;
FT_TRACE4(( " number of glyphs: allocated %d (used %d)\n",
font->glyphs_size,
font->glyphs_used ));
FT_TRACE4(( " number of unencoded glyphs: allocated %d (used %d)\n",
font->unencoded_size,
font->unencoded_used ));
bdfface->num_faces = 1;
bdfface->face_index = 0;
bdfface->face_flags = FT_FACE_FLAG_FIXED_SIZES |
FT_FACE_FLAG_HORIZONTAL |
FT_FACE_FLAG_FAST_GLYPHS;
prop = bdf_get_font_property( font, "SPACING" );
if ( prop && prop->format == BDF_ATOM &&
prop->value.atom &&
( *(prop->value.atom) == 'M' || *(prop->value.atom) == 'm' ||
*(prop->value.atom) == 'C' || *(prop->value.atom) == 'c' ) )
bdfface->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;
/* FZ XXX: TO DO: FT_FACE_FLAGS_VERTICAL */
/* FZ XXX: I need a font to implement this */
prop = bdf_get_font_property( font, "FAMILY_NAME" );
if ( prop && prop->value.atom )
{
if ( FT_STRDUP( bdfface->family_name, prop->value.atom ) )
goto Exit;
}
else
bdfface->family_name = 0;
if ( ( error = bdf_interpret_style( face ) ) != 0 )
goto Exit;
/* the number of glyphs (with one slot for the undefined glyph */
/* at position 0 and all unencoded glyphs) */
bdfface->num_glyphs = font->glyphs_size + 1;
bdfface->num_fixed_sizes = 1;
if ( FT_NEW_ARRAY( bdfface->available_sizes, 1 ) )
goto Exit;
{
FT_Bitmap_Size* bsize = bdfface->available_sizes;
FT_Short resolution_x = 0, resolution_y = 0;
FT_MEM_ZERO( bsize, sizeof ( FT_Bitmap_Size ) );
bsize->height = (FT_Short)( font->font_ascent + font->font_descent );
prop = bdf_get_font_property( font, "AVERAGE_WIDTH" );
if ( prop )
bsize->width = (FT_Short)( ( prop->value.l + 5 ) / 10 );
else
bsize->width = (FT_Short)( bsize->height * 2/3 );
prop = bdf_get_font_property( font, "POINT_SIZE" );
if ( prop )
/* convert from 722.7 decipoints to 72 points per inch */
bsize->size =
(FT_Pos)( ( prop->value.l * 64 * 7200 + 36135L ) / 72270L );
else
bsize->size = bsize->width << 6;
prop = bdf_get_font_property( font, "PIXEL_SIZE" );
if ( prop )
bsize->y_ppem = (FT_Short)prop->value.l << 6;
prop = bdf_get_font_property( font, "RESOLUTION_X" );
if ( prop )
resolution_x = (FT_Short)prop->value.l;
prop = bdf_get_font_property( font, "RESOLUTION_Y" );
if ( prop )
resolution_y = (FT_Short)prop->value.l;
if ( bsize->y_ppem == 0 )
{
bsize->y_ppem = bsize->size;
if ( resolution_y )
bsize->y_ppem = bsize->y_ppem * resolution_y / 72;
}
if ( resolution_x && resolution_y )
bsize->x_ppem = bsize->y_ppem * resolution_x / resolution_y;
else
bsize->x_ppem = bsize->y_ppem;
}
/* encoding table */
{
bdf_glyph_t* cur = font->glyphs;
unsigned long n;
if ( FT_NEW_ARRAY( face->en_table, font->glyphs_size ) )
goto Exit;
face->default_glyph = 0;
for ( n = 0; n < font->glyphs_size; n++ )
{
(face->en_table[n]).enc = cur[n].encoding;
FT_TRACE4(( " idx %d, val 0x%lX\n", n, cur[n].encoding ));
(face->en_table[n]).glyph = (FT_Short)n;
if ( cur[n].encoding == font->default_char )
{
if ( n < FT_UINT_MAX )
face->default_glyph = (FT_UInt)n;
else
FT_TRACE1(( "BDF_Face_Init:"
" idx %d is too large for this system\n", n ));
}
}
}
/* charmaps */
{
bdf_property_t *charset_registry = 0, *charset_encoding = 0;
FT_Bool unicode_charmap = 0;
charset_registry =
bdf_get_font_property( font, "CHARSET_REGISTRY" );
charset_encoding =
bdf_get_font_property( font, "CHARSET_ENCODING" );
if ( charset_registry && charset_encoding )
{
if ( charset_registry->format == BDF_ATOM &&
charset_encoding->format == BDF_ATOM &&
charset_registry->value.atom &&
charset_encoding->value.atom )
{
const char* s;
if ( FT_STRDUP( face->charset_encoding,
charset_encoding->value.atom ) ||
FT_STRDUP( face->charset_registry,
charset_registry->value.atom ) )
goto Exit;
/* Uh, oh, compare first letters manually to avoid dependency */
/* on locales. */
s = face->charset_registry;
if ( ( s[0] == 'i' || s[0] == 'I' ) &&
( s[1] == 's' || s[1] == 'S' ) &&
( s[2] == 'o' || s[2] == 'O' ) )
{
s += 3;
if ( !ft_strcmp( s, "10646" ) ||
( !ft_strcmp( s, "8859" ) &&
!ft_strcmp( face->charset_encoding, "1" ) ) )
unicode_charmap = 1;
}
{
FT_CharMapRec charmap;
charmap.face = FT_FACE( face );
charmap.encoding = FT_ENCODING_NONE;
/* initial platform/encoding should indicate unset status? */
charmap.platform_id = TT_PLATFORM_APPLE_UNICODE;
charmap.encoding_id = TT_APPLE_ID_DEFAULT;
if ( unicode_charmap )
{
charmap.encoding = FT_ENCODING_UNICODE;
charmap.platform_id = TT_PLATFORM_MICROSOFT;
charmap.encoding_id = TT_MS_ID_UNICODE_CS;
}
error = FT_CMap_New( &bdf_cmap_class, NULL, &charmap, NULL );
#if 0
/* Select default charmap */
if ( bdfface->num_charmaps )
bdfface->charmap = bdfface->charmaps[0];
#endif
}
goto Exit;
}
}
/* otherwise assume Adobe standard encoding */
{
FT_CharMapRec charmap;
charmap.face = FT_FACE( face );
charmap.encoding = FT_ENCODING_ADOBE_STANDARD;
charmap.platform_id = TT_PLATFORM_ADOBE;
charmap.encoding_id = TT_ADOBE_ID_STANDARD;
error = FT_CMap_New( &bdf_cmap_class, NULL, &charmap, NULL );
/* Select default charmap */
if ( bdfface->num_charmaps )
bdfface->charmap = bdfface->charmaps[0];
}
}
}
Exit:
return error;
Fail:
BDF_Face_Done( bdfface );
return BDF_Err_Unknown_File_Format;
}
FT_CALLBACK_DEF( FT_Error )
BDF_Size_Select( FT_Size size,
FT_ULong strike_index )
{
bdf_font_t* bdffont = ( (BDF_Face)size->face )->bdffont;
FT_Select_Metrics( size->face, strike_index );
size->metrics.ascender = bdffont->font_ascent << 6;
size->metrics.descender = -bdffont->font_descent << 6;
size->metrics.max_advance = bdffont->bbx.width << 6;
return BDF_Err_Ok;
}
FT_CALLBACK_DEF( FT_Error )
BDF_Size_Request( FT_Size size,
FT_Size_Request req )
{
FT_Face face = size->face;
FT_Bitmap_Size* bsize = face->available_sizes;
bdf_font_t* bdffont = ( (BDF_Face)face )->bdffont;
FT_Error error = BDF_Err_Invalid_Pixel_Size;
FT_Long height;
height = FT_REQUEST_HEIGHT( req );
height = ( height + 32 ) >> 6;
switch ( req->type )
{
case FT_SIZE_REQUEST_TYPE_NOMINAL:
if ( height == ( ( bsize->y_ppem + 32 ) >> 6 ) )
error = BDF_Err_Ok;
break;
case FT_SIZE_REQUEST_TYPE_REAL_DIM:
if ( height == ( bdffont->font_ascent +
bdffont->font_descent ) )
error = BDF_Err_Ok;
break;
default:
error = BDF_Err_Unimplemented_Feature;
break;
}
if ( error )
return error;
else
return BDF_Size_Select( size, 0 );
}
FT_CALLBACK_DEF( FT_Error )
BDF_Glyph_Load( FT_GlyphSlot slot,
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
BDF_Face bdf = (BDF_Face)FT_SIZE_FACE( size );
FT_Face face = FT_FACE( bdf );
FT_Error error = BDF_Err_Ok;
FT_Bitmap* bitmap = &slot->bitmap;
bdf_glyph_t glyph;
int bpp = bdf->bdffont->bpp;
FT_UNUSED( load_flags );
if ( !face || glyph_index >= (FT_UInt)face->num_glyphs )
{
error = BDF_Err_Invalid_Argument;
goto Exit;
}
/* index 0 is the undefined glyph */
if ( glyph_index == 0 )
glyph_index = bdf->default_glyph;
else
glyph_index--;
/* slot, bitmap => freetype, glyph => bdflib */
glyph = bdf->bdffont->glyphs[glyph_index];
bitmap->rows = glyph.bbx.height;
bitmap->width = glyph.bbx.width;
if ( glyph.bpr > INT_MAX )
FT_TRACE1(( "BDF_Glyph_Load: too large pitch %d is truncated\n",
glyph.bpr ));
/* same as FT_Bitmap.pitch */
bitmap->pitch = (int)glyph.bpr;
/* note: we don't allocate a new array to hold the bitmap; */
/* we can simply point to it */
ft_glyphslot_set_bitmap( slot, glyph.bitmap );
switch ( bpp )
{
case 1:
bitmap->pixel_mode = FT_PIXEL_MODE_MONO;
break;
case 2:
bitmap->pixel_mode = FT_PIXEL_MODE_GRAY2;
break;
case 4:
bitmap->pixel_mode = FT_PIXEL_MODE_GRAY4;
break;
case 8:
bitmap->pixel_mode = FT_PIXEL_MODE_GRAY;
bitmap->num_grays = 256;
break;
}
slot->format = FT_GLYPH_FORMAT_BITMAP;
slot->bitmap_left = glyph.bbx.x_offset;
slot->bitmap_top = glyph.bbx.ascent;
slot->metrics.horiAdvance = glyph.dwidth << 6;
slot->metrics.horiBearingX = glyph.bbx.x_offset << 6;
slot->metrics.horiBearingY = glyph.bbx.ascent << 6;
slot->metrics.width = bitmap->width << 6;
slot->metrics.height = bitmap->rows << 6;
/*
* XXX DWIDTH1 and VVECTOR should be parsed and
* used here, provided such fonts do exist.
*/
ft_synthesize_vertical_metrics( &slot->metrics,
bdf->bdffont->bbx.height << 6 );
Exit:
return error;
}
/*
*
* BDF SERVICE
*
*/
static FT_Error
bdf_get_bdf_property( BDF_Face face,
const char* prop_name,
BDF_PropertyRec *aproperty )
{
bdf_property_t* prop;
FT_ASSERT( face && face->bdffont );
prop = bdf_get_font_property( face->bdffont, prop_name );
if ( prop )
{
switch ( prop->format )
{
case BDF_ATOM:
aproperty->type = BDF_PROPERTY_TYPE_ATOM;
aproperty->u.atom = prop->value.atom;
break;
case BDF_INTEGER:
if ( prop->value.l > 0x7FFFFFFFL || prop->value.l < ( -1 - 0x7FFFFFFFL ) )
{
FT_TRACE1(( "bdf_get_bdf_property:"
" too large integer 0x%x is truncated\n" ));
}
aproperty->type = BDF_PROPERTY_TYPE_INTEGER;
aproperty->u.integer = (FT_Int32)prop->value.l;
break;
case BDF_CARDINAL:
if ( prop->value.ul > 0xFFFFFFFFUL )
{
FT_TRACE1(( "bdf_get_bdf_property:"
" too large cardinal 0x%x is truncated\n" ));
}
aproperty->type = BDF_PROPERTY_TYPE_CARDINAL;
aproperty->u.cardinal = (FT_UInt32)prop->value.ul;
break;
default:
goto Fail;
}
return 0;
}
Fail:
return BDF_Err_Invalid_Argument;
}
static FT_Error
bdf_get_charset_id( BDF_Face face,
const char* *acharset_encoding,
const char* *acharset_registry )
{
*acharset_encoding = face->charset_encoding;
*acharset_registry = face->charset_registry;
return 0;
}
static const FT_Service_BDFRec bdf_service_bdf =
{
(FT_BDF_GetCharsetIdFunc)bdf_get_charset_id,
(FT_BDF_GetPropertyFunc) bdf_get_bdf_property
};
/*
*
* SERVICES LIST
*
*/
static const FT_ServiceDescRec bdf_services[] =
{
{ FT_SERVICE_ID_BDF, &bdf_service_bdf },
{ FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_BDF },
{ NULL, NULL }
};
FT_CALLBACK_DEF( FT_Module_Interface )
bdf_driver_requester( FT_Module module,
const char* name )
{
FT_UNUSED( module );
return ft_service_list_lookup( bdf_services, name );
}
FT_CALLBACK_TABLE_DEF
const FT_Driver_ClassRec bdf_driver_class =
{
{
FT_MODULE_FONT_DRIVER |
FT_MODULE_DRIVER_NO_OUTLINES,
sizeof ( FT_DriverRec ),
"bdf",
0x10000L,
0x20000L,
0,
/* FT_Module_Constructor */
0,
/* FT_Module_Destructor */
0,
bdf_driver_requester
},
sizeof ( BDF_FaceRec ),
sizeof ( FT_SizeRec ),
sizeof ( FT_GlyphSlotRec ),
BDF_Face_Init,
BDF_Face_Done,
/* FT_Size_InitFunc */
0,
/* FT_Size_DoneFunc */
0,
/* FT_Slot_InitFunc */
0,
/* FT_Slot_DoneFunc */
0,
BDF_Glyph_Load,
/* FT_Face_GetKerningFunc */
0,
/* FT_Face_AttachFunc */
0,
/* FT_Face_GetAdvancesFunc */
0,
BDF_Size_Request,
BDF_Size_Select
};
/* END */
/* END */
/***************************************************************************/
/* */
/* cff.c */
/* */
/* FreeType OpenType driver component (body only). */
/* */
/* Copyright 1996-2001, 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* cffpic.c */
/* */
/* The FreeType position independent code services for cff module. */
/* */
/* Copyright 2009, 2010, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* cffcmap.h */
/* */
/* CFF character mapping table (cmap) support (specification). */
/* */
/* Copyright 2002, 2003, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CFFCMAP_H__
/***************************************************************************/
/* */
/* cffobjs.h */
/* */
/* OpenType objects manager (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2006, 2007, 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CFFOBJS_H__
/***************************************************************************/
/* */
/* cfftypes.h */
/* */
/* Basic OpenType/CFF type definitions and interface (specification */
/* only). */
/* */
/* Copyright 1996-2003, 2006-2008, 2010-2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CFFTYPES_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Struct> */
/* CFF_IndexRec */
/* */
/* <Description> */
/* A structure used to model a CFF Index table. */
/* */
/* <Fields> */
/* stream :: The source input stream. */
/* */
/* start :: The position of the first index byte in the */
/* input stream. */
/* */
/* count :: The number of elements in the index. */
/* */
/* off_size :: The size in bytes of object offsets in index. */
/* */
/* data_offset :: The position of first data byte in the index's */
/* bytes. */
/* */
/* data_size :: The size of the data table in this index. */
/* */
/* offsets :: A table of element offsets in the index. Must be */
/* loaded explicitly. */
/* */
/* bytes :: If the index is loaded in memory, its bytes. */
/* */
typedef struct CFF_IndexRec_
{
FT_Stream stream;
FT_ULong start;
FT_UInt count;
FT_Byte off_size;
FT_ULong data_offset;
FT_ULong data_size;
FT_ULong* offsets;
FT_Byte* bytes;
} CFF_IndexRec, *CFF_Index;
typedef struct CFF_EncodingRec_
{
FT_UInt format;
FT_ULong offset;
FT_UInt count;
/* avoid dynamic allocations */
FT_UShort sids [256];
FT_UShort codes[256];
} CFF_EncodingRec, *CFF_Encoding;
typedef struct CFF_CharsetRec_
{
FT_UInt format;
FT_ULong offset;
FT_UShort* sids;
/* the inverse mapping of `sids'; only needed */
FT_UShort* cids;
/* for CID-keyed fonts */
FT_UInt max_cid;
FT_UInt num_glyphs;
} CFF_CharsetRec, *CFF_Charset;
typedef struct CFF_FontRecDictRec_
{
FT_UInt version;
FT_UInt notice;
FT_UInt copyright;
FT_UInt full_name;
FT_UInt family_name;
FT_UInt weight;
FT_Bool is_fixed_pitch;
FT_Fixed italic_angle;
FT_Fixed underline_position;
FT_Fixed underline_thickness;
FT_Int paint_type;
FT_Int charstring_type;
FT_Matrix font_matrix;
FT_Bool has_font_matrix;
/* temporarily used as scaling value also */
FT_ULong units_per_em;
FT_Vector font_offset;
FT_ULong unique_id;
FT_BBox font_bbox;
FT_Pos stroke_width;
FT_ULong charset_offset;
FT_ULong encoding_offset;
FT_ULong charstrings_offset;
FT_ULong private_offset;
FT_ULong private_size;
FT_Long synthetic_base;
FT_UInt embedded_postscript;
/* these should only be used for the top-level font dictionary */
FT_UInt cid_registry;
FT_UInt cid_ordering;
FT_Long cid_supplement;
FT_Long cid_font_version;
FT_Long cid_font_revision;
FT_Long cid_font_type;
FT_ULong cid_count;
FT_ULong cid_uid_base;
FT_ULong cid_fd_array_offset;
FT_ULong cid_fd_select_offset;
FT_UInt cid_font_name;
} CFF_FontRecDictRec, *CFF_FontRecDict;
typedef struct CFF_PrivateRec_
{
FT_Byte num_blue_values;
FT_Byte num_other_blues;
FT_Byte num_family_blues;
FT_Byte num_family_other_blues;
FT_Pos blue_values[14];
FT_Pos other_blues[10];
FT_Pos family_blues[14];
FT_Pos family_other_blues[10];
FT_Fixed blue_scale;
FT_Pos blue_shift;
FT_Pos blue_fuzz;
FT_Pos standard_width;
FT_Pos standard_height;
FT_Byte num_snap_widths;
FT_Byte num_snap_heights;
FT_Pos snap_widths[13];
FT_Pos snap_heights[13];
FT_Bool force_bold;
FT_Fixed force_bold_threshold;
FT_Int lenIV;
FT_Int language_group;
FT_Fixed expansion_factor;
FT_Long initial_random_seed;
FT_ULong local_subrs_offset;
FT_Pos default_width;
FT_Pos nominal_width;
} CFF_PrivateRec, *CFF_Private;
typedef struct CFF_FDSelectRec_
{
FT_Byte format;
FT_UInt range_count;
/* that's the table, taken from the file `as is' */
FT_Byte* data;
FT_UInt data_size;
/* small cache for format 3 only */
FT_UInt cache_first;
FT_UInt cache_count;
FT_Byte cache_fd;
} CFF_FDSelectRec, *CFF_FDSelect;
/* A SubFont packs a font dict and a private dict together. They are */
/* needed to support CID-keyed CFF fonts. */
typedef struct CFF_SubFontRec_
{
CFF_FontRecDictRec font_dict;
CFF_PrivateRec private_dict;
CFF_IndexRec local_subrs_index;
/* array of pointers into Local Subrs INDEX data */
FT_Byte** local_subrs;
} CFF_SubFontRec, *CFF_SubFont;
#define CFF_MAX_CID_FONTS 256
typedef struct CFF_FontRec_
{
FT_Stream stream;
FT_Memory memory;
FT_UInt num_faces;
FT_UInt num_glyphs;
FT_Byte version_major;
FT_Byte version_minor;
FT_Byte header_size;
FT_Byte absolute_offsize;
CFF_IndexRec name_index;
CFF_IndexRec top_dict_index;
CFF_IndexRec global_subrs_index;
CFF_EncodingRec encoding;
CFF_CharsetRec charset;
CFF_IndexRec charstrings_index;
CFF_IndexRec font_dict_index;
CFF_IndexRec private_index;
CFF_IndexRec local_subrs_index;
FT_String* font_name;
/* array of pointers into Global Subrs INDEX data */
FT_Byte** global_subrs;
/* array of pointers into String INDEX data stored at string_pool */
FT_UInt num_strings;
FT_Byte** strings;
FT_Byte* string_pool;
CFF_SubFontRec top_font;
FT_UInt num_subfonts;
CFF_SubFont subfonts[CFF_MAX_CID_FONTS];
CFF_FDSelectRec fd_select;
/* interface to PostScript hinter */
PSHinter_Service pshinter;
/* interface to Postscript Names service */
FT_Service_PsCMaps psnames;
/* since version 2.3.0 */
/* font info dictionary */
PS_FontInfoRec* font_info;
/* since version 2.3.6 */
FT_String* registry;
FT_String* ordering;
} CFF_FontRec, *CFF_Font;
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Type> */
/* CFF_Driver */
/* */
/* <Description> */
/* A handle to an OpenType driver object. */
/* */
typedef struct CFF_DriverRec_* CFF_Driver;
typedef TT_Face CFF_Face;
/*************************************************************************/
/* */
/* <Type> */
/* CFF_Size */
/* */
/* <Description> */
/* A handle to an OpenType size object. */
/* */
typedef struct CFF_SizeRec_
{
FT_SizeRec root;
/* 0xFFFFFFFF to indicate invalid */
FT_ULong strike_index;
} CFF_SizeRec, *CFF_Size;
/*************************************************************************/
/* */
/* <Type> */
/* CFF_GlyphSlot */
/* */
/* <Description> */
/* A handle to an OpenType glyph slot object. */
/* */
typedef struct CFF_GlyphSlotRec_
{
FT_GlyphSlotRec root;
FT_Bool hint;
FT_Bool scaled;
FT_Fixed x_scale;
FT_Fixed y_scale;
} CFF_GlyphSlotRec, *CFF_GlyphSlot;
/*************************************************************************/
/* */
/* <Type> */
/* CFF_Internal */
/* */
/* <Description> */
/* The interface to the `internal' field of `FT_Size'. */
/* */
typedef struct CFF_InternalRec_
{
PSH_Globals topfont;
PSH_Globals subfonts[CFF_MAX_CID_FONTS];
} CFF_InternalRec, *CFF_Internal;
/*************************************************************************/
/* */
/* Subglyph transformation record. */
/* */
typedef struct CFF_Transform_
{
/* transformation matrix coefficients */
FT_Fixed xx, xy;
FT_Fixed yx, yy;
/* offsets */
FT_F26Dot6 ox, oy;
} CFF_Transform;
/***********************************************************************/
/* */
/* TrueType driver class. */
/* */
typedef struct CFF_DriverRec_
{
FT_DriverRec root;
void* extension_component;
} CFF_DriverRec;
FT_LOCAL( FT_Error )
/* CFF_Size */
cff_size_init( FT_Size size );
FT_LOCAL( void )
/* CFF_Size */
cff_size_done( FT_Size size );
FT_LOCAL( FT_Error )
cff_size_request( FT_Size size,
FT_Size_Request req );
FT_LOCAL( FT_Error )
cff_size_select( FT_Size size,
FT_ULong strike_index );
FT_LOCAL( void )
cff_slot_done( FT_GlyphSlot slot );
FT_LOCAL( FT_Error )
cff_slot_init( FT_GlyphSlot slot );
/*************************************************************************/
/* */
/* Face functions */
/* */
FT_LOCAL( FT_Error )
cff_face_init( FT_Stream stream,
/* CFF_Face */
FT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
FT_LOCAL( void )
/* CFF_Face */
cff_face_done( FT_Face face );
/*************************************************************************/
/* */
/* Driver functions */
/* */
FT_LOCAL( FT_Error )
cff_driver_init( FT_Module module );
FT_LOCAL( void )
cff_driver_done( FT_Module module );
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE1 STANDARD (AND EXPERT) ENCODING CMAPS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* standard (and expert) encoding cmaps */
typedef struct CFF_CMapStdRec_* CFF_CMapStd;
typedef struct CFF_CMapStdRec_
{
FT_CMapRec cmap;
/* up to 256 elements */
FT_UShort* gids;
} CFF_CMapStdRec;
FT_DECLARE_CMAP_CLASS(cff_cmap_encoding_class_rec)
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** CFF SYNTHETIC UNICODE ENCODING CMAP *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* unicode (synthetic) cmaps */
FT_DECLARE_CMAP_CLASS(cff_cmap_unicode_class_rec)
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* cffpic.h */
/* */
/* The FreeType position independent code services for cff module. */
/* */
/* Copyright 2009, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CFFPIC_H__
FT_BEGIN_HEADER
#define CFF_SERVICE_PS_INFO_GET cff_service_ps_info
#define CFF_SERVICE_GLYPH_DICT_GET cff_service_glyph_dict
#define CFF_SERVICE_PS_NAME_GET cff_service_ps_name
#define CFF_SERVICE_GET_CMAP_INFO_GET cff_service_get_cmap_info
#define CFF_SERVICE_CID_INFO_GET cff_service_cid_info
#define CFF_SERVICES_GET cff_services
#define CFF_CMAP_ENCODING_CLASS_REC_GET cff_cmap_encoding_class_rec
#define CFF_CMAP_UNICODE_CLASS_REC_GET cff_cmap_unicode_class_rec
#define CFF_FIELD_HANDLERS_GET cff_field_handlers
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* cfferrs.h */
/* */
/* CFF error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the CFF error enumeration constants. */
/* */
/*************************************************************************/
#define __CFFERRS_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX CFF_Err_
#define FT_ERR_BASE FT_Mod_Err_CFF
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/* END */
/***************************************************************************/
/* */
/* cffdrivr.c */
/* */
/* OpenType font driver implementation (body). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* cffdrivr.h */
/* */
/* High-level OpenType driver interface (specification). */
/* */
/* Copyright 1996-2001, 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef __CFFDRIVER_H__
#define __CFFDRIVER_H__
FT_BEGIN_HEADER
FT_DECLARE_DRIVER( cff_driver_class )
FT_END_HEADER
/* __CFFDRIVER_H__ */
#endif
/* END */
/***************************************************************************/
/* */
/* cffgload.h */
/* */
/* OpenType Glyph Loader (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2006, 2007, 2008, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CFFGLOAD_H__
FT_BEGIN_HEADER
#define CFF_MAX_OPERANDS 48
#define CFF_MAX_SUBRS_CALLS 32
#define CFF_MAX_TRANS_ELEMENTS 32
/*************************************************************************/
/* */
/* <Structure> */
/* CFF_Builder */
/* */
/* <Description> */
/* A structure used during glyph loading to store its outline. */
/* */
/* <Fields> */
/* memory :: The current memory object. */
/* */
/* face :: The current face object. */
/* */
/* glyph :: The current glyph slot. */
/* */
/* loader :: The current glyph loader. */
/* */
/* base :: The base glyph outline. */
/* */
/* current :: The current glyph outline. */
/* */
/* pos_x :: The horizontal translation (if composite glyph). */
/* */
/* pos_y :: The vertical translation (if composite glyph). */
/* */
/* left_bearing :: The left side bearing point. */
/* */
/* advance :: The horizontal advance vector. */
/* */
/* bbox :: Unused. */
/* */
/* path_begun :: A flag which indicates that a new path has begun. */
/* */
/* load_points :: If this flag is not set, no points are loaded. */
/* */
/* no_recurse :: Set but not used. */
/* */
/* metrics_only :: A boolean indicating that we only want to compute */
/* the metrics of a given glyph, not load all of its */
/* points. */
/* */
/* hints_funcs :: Auxiliary pointer for hinting. */
/* */
/* hints_globals :: Auxiliary pointer for hinting. */
/* */
typedef struct CFF_Builder_
{
FT_Memory memory;
TT_Face face;
CFF_GlyphSlot glyph;
FT_GlyphLoader loader;
FT_Outline* base;
FT_Outline* current;
FT_Pos pos_x;
FT_Pos pos_y;
FT_Vector left_bearing;
FT_Vector advance;
/* bounding box */
FT_BBox bbox;
FT_Bool path_begun;
FT_Bool load_points;
FT_Bool no_recurse;
FT_Bool metrics_only;
/* hinter-specific */
void* hints_funcs;
/* hinter-specific */
void* hints_globals;
} CFF_Builder;
/* execution context charstring zone */
typedef struct CFF_Decoder_Zone_
{
FT_Byte* base;
FT_Byte* limit;
FT_Byte* cursor;
} CFF_Decoder_Zone;
typedef struct CFF_Decoder_
{
CFF_Builder builder;
CFF_Font cff;
FT_Fixed stack[CFF_MAX_OPERANDS + 1];
FT_Fixed* top;
CFF_Decoder_Zone zones[CFF_MAX_SUBRS_CALLS + 1];
CFF_Decoder_Zone* zone;
FT_Int flex_state;
FT_Int num_flex_vectors;
FT_Vector flex_vectors[7];
FT_Pos glyph_width;
FT_Pos nominal_width;
FT_Bool read_width;
FT_Bool width_only;
FT_Int num_hints;
FT_Fixed buildchar[CFF_MAX_TRANS_ELEMENTS];
FT_UInt num_locals;
FT_UInt num_globals;
FT_Int locals_bias;
FT_Int globals_bias;
FT_Byte** locals;
FT_Byte** globals;
/* for pure CFF fonts only */
FT_Byte** glyph_names;
/* number of glyphs in font */
FT_UInt num_glyphs;
FT_Render_Mode hint_mode;
FT_Bool seac;
} CFF_Decoder;
FT_LOCAL( void )
cff_decoder_init( CFF_Decoder* decoder,
TT_Face face,
CFF_Size size,
CFF_GlyphSlot slot,
FT_Bool hinting,
FT_Render_Mode hint_mode );
FT_LOCAL( FT_Error )
cff_decoder_prepare( CFF_Decoder* decoder,
CFF_Size size,
FT_UInt glyph_index );
/* unused until we support pure CFF fonts */
#if 0
/* Compute the maximum advance width of a font through quick parsing */
FT_LOCAL( FT_Error )
cff_compute_max_advance( TT_Face face,
FT_Int* max_advance );
/* 0 */
#endif
FT_LOCAL( FT_Error )
cff_decoder_parse_charstrings( CFF_Decoder* decoder,
FT_Byte* charstring_base,
FT_ULong charstring_len );
FT_LOCAL( FT_Error )
cff_slot_load( CFF_GlyphSlot glyph,
CFF_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* cffload.h */
/* */
/* OpenType & CFF data/program tables loader (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2007, 2008, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CFFLOAD_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_UShort )
cff_get_standard_encoding( FT_UInt charcode );
FT_LOCAL( FT_String* )
cff_index_get_string( CFF_Font font,
FT_UInt element );
FT_LOCAL( FT_String* )
cff_index_get_sid_string( CFF_Font font,
FT_UInt sid );
FT_LOCAL( FT_Error )
cff_index_access_element( CFF_Index idx,
FT_UInt element,
FT_Byte** pbytes,
FT_ULong* pbyte_len );
FT_LOCAL( void )
cff_index_forget_element( CFF_Index idx,
FT_Byte** pbytes );
FT_LOCAL( FT_String* )
cff_index_get_name( CFF_Font font,
FT_UInt element );
FT_LOCAL( FT_UInt )
cff_charset_cid_to_gindex( CFF_Charset charset,
FT_UInt cid );
FT_LOCAL( FT_Error )
cff_font_load( FT_Library library,
FT_Stream stream,
FT_Int face_index,
CFF_Font font,
FT_Bool pure_cff );
FT_LOCAL( void )
cff_font_done( CFF_Font font );
FT_LOCAL( FT_Byte )
cff_fd_select_get( CFF_FDSelect fdselect,
FT_UInt glyph_index );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* cffparse.h */
/* */
/* CFF token stream parser (specification) */
/* */
/* Copyright 1996-2003, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef __CFF_PARSE_H__
#define __CFF_PARSE_H__
FT_BEGIN_HEADER
#define CFF_MAX_STACK_DEPTH 96
#define CFF_CODE_TOPDICT 0x1000
#define CFF_CODE_PRIVATE 0x2000
typedef struct CFF_ParserRec_
{
FT_Library library;
FT_Byte* start;
FT_Byte* limit;
FT_Byte* cursor;
FT_Byte* stack[CFF_MAX_STACK_DEPTH + 1];
FT_Byte** top;
FT_UInt object_code;
void* object;
} CFF_ParserRec, *CFF_Parser;
FT_LOCAL( void )
cff_parser_init( CFF_Parser parser,
FT_UInt code,
void* object,
FT_Library library);
FT_LOCAL( FT_Error )
cff_parser_run( CFF_Parser parser,
FT_Byte* start,
FT_Byte* limit );
enum
{
cff_kind_none = 0,
cff_kind_num,
cff_kind_fixed,
cff_kind_fixed_thousand,
cff_kind_string,
cff_kind_bool,
cff_kind_delta,
cff_kind_callback,
/* do not remove */
cff_kind_max
};
/* now generate handlers for the most simple fields */
typedef FT_Error (*CFF_Field_Reader)( CFF_Parser parser );
typedef struct CFF_Field_Handler_
{
int kind;
int code;
FT_UInt offset;
FT_Byte size;
CFF_Field_Reader reader;
FT_UInt array_max;
FT_UInt count_offset;
} CFF_Field_Handler;
FT_END_HEADER
/* __CFF_PARSE_H__ */
#endif
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cffdriver
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** F A C E S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
#undef PAIR_TAG
#define PAIR_TAG( left, right ) ( ( (FT_ULong)left << 16 ) | \
(FT_ULong)right )
/*************************************************************************/
/* */
/* <Function> */
/* cff_get_kerning */
/* */
/* <Description> */
/* A driver method used to return the kerning vector between two */
/* glyphs of the same face. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* left_glyph :: The index of the left glyph in the kern pair. */
/* */
/* right_glyph :: The index of the right glyph in the kern pair. */
/* */
/* <Output> */
/* kerning :: The kerning vector. This is in font units for */
/* scalable formats, and in pixels for fixed-sizes */
/* formats. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* Only horizontal layouts (left-to-right & right-to-left) are */
/* supported by this function. Other layouts, or more sophisticated */
/* kernings, are out of scope of this method (the basic driver */
/* interface is meant to be simple). */
/* */
/* They can be implemented by format-specific interfaces. */
/* */
FT_CALLBACK_DEF( FT_Error )
/* TT_Face */
cff_get_kerning( FT_Face ttface,
FT_UInt left_glyph,
FT_UInt right_glyph,
FT_Vector* kerning )
{
TT_Face face = (TT_Face)ttface;
SFNT_Service sfnt = (SFNT_Service)face->sfnt;
kerning->x = 0;
kerning->y = 0;
if ( sfnt )
kerning->x = sfnt->get_kerning( face, left_glyph, right_glyph );
return CFF_Err_Ok;
}
#undef PAIR_TAG
/*************************************************************************/
/* */
/* <Function> */
/* cff_glyph_load */
/* */
/* <Description> */
/* A driver method used to load a glyph within a given glyph slot. */
/* */
/* <Input> */
/* slot :: A handle to the target slot object where the glyph */
/* will be loaded. */
/* */
/* size :: A handle to the source face size at which the glyph */
/* must be scaled, loaded, etc. */
/* */
/* glyph_index :: The index of the glyph in the font file. */
/* */
/* load_flags :: A flag indicating what to load for this glyph. The */
/* FT_LOAD_??? constants can be used to control the */
/* glyph loading process (e.g., whether the outline */
/* should be scaled, whether to load bitmaps or not, */
/* whether to hint the outline, etc). */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_CALLBACK_DEF( FT_Error )
/* CFF_GlyphSlot */
cff_glyph_load( FT_GlyphSlot cffslot,
/* CFF_Size */
FT_Size cffsize,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
CFF_GlyphSlot slot = (CFF_GlyphSlot)cffslot;
CFF_Size size = (CFF_Size)cffsize;
if ( !slot )
return CFF_Err_Invalid_Slot_Handle;
/* check whether we want a scaled outline or bitmap */
if ( !size )
load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING;
/* reset the size object if necessary */
if ( load_flags & FT_LOAD_NO_SCALE )
size = NULL;
if ( size )
{
/* these two objects must have the same parent */
if ( cffsize->face != cffslot->face )
return CFF_Err_Invalid_Face_Handle;
}
/* now load the glyph outline if necessary */
error = cff_slot_load( slot, size, glyph_index, load_flags );
/* force drop-out mode to 2 - irrelevant now */
/* slot->outline.dropout_mode = 2; */
return error;
}
FT_CALLBACK_DEF( FT_Error )
cff_get_advances( FT_Face face,
FT_UInt start,
FT_UInt count,
FT_Int32 flags,
FT_Fixed* advances )
{
FT_UInt nn;
FT_Error error = CFF_Err_Ok;
FT_GlyphSlot slot = face->glyph;
flags |= (FT_UInt32)FT_LOAD_ADVANCE_ONLY;
for ( nn = 0; nn < count; nn++ )
{
error = cff_glyph_load( slot, face->size, start + nn, flags );
if ( error )
break;
advances[nn] = ( flags & FT_LOAD_VERTICAL_LAYOUT )
? slot->linearVertAdvance
: slot->linearHoriAdvance;
}
return error;
}
/*
* GLYPH DICT SERVICE
*
*/
static FT_Error
cff_get_glyph_name( CFF_Face face,
FT_UInt glyph_index,
FT_Pointer buffer,
FT_UInt buffer_max )
{
CFF_Font font = (CFF_Font)face->extra.data;
FT_String* gname;
FT_UShort sid;
FT_Error error;
if ( !font->psnames )
{
FT_ERROR(( "cff_get_glyph_name:"
" cannot get glyph name from CFF & CEF fonts\n"
" "
" without the `PSNames' module\n" ));
error = CFF_Err_Missing_Module;
goto Exit;
}
/* first, locate the sid in the charset table */
sid = font->charset.sids[glyph_index];
/* now, lookup the name itself */
gname = cff_index_get_sid_string( font, sid );
if ( gname )
FT_STRCPYN( buffer, gname, buffer_max );
error = CFF_Err_Ok;
Exit:
return error;
}
static FT_UInt
cff_get_name_index( CFF_Face face,
FT_String* glyph_name )
{
CFF_Font cff;
CFF_Charset charset;
FT_Service_PsCMaps psnames;
FT_String* name;
FT_UShort sid;
FT_UInt i;
cff = (CFF_FontRec *)face->extra.data;
charset = &cff->charset;
FT_FACE_FIND_GLOBAL_SERVICE( face, psnames, POSTSCRIPT_CMAPS );
if ( !psnames )
return 0;
for ( i = 0; i < cff->num_glyphs; i++ )
{
sid = charset->sids[i];
if ( sid > 390 )
name = cff_index_get_string( cff, sid - 391 );
else
name = (FT_String *)psnames->adobe_std_strings( sid );
if ( !name )
continue;
if ( !ft_strcmp( glyph_name, name ) )
return i;
}
return 0;
}
FT_DEFINE_SERVICE_GLYPHDICTREC(cff_service_glyph_dict,
(FT_GlyphDict_GetNameFunc) cff_get_glyph_name,
(FT_GlyphDict_NameIndexFunc)cff_get_name_index
)
/*
* POSTSCRIPT INFO SERVICE
*
*/
static FT_Int
cff_ps_has_glyph_names( FT_Face face )
{
return ( face->face_flags & FT_FACE_FLAG_GLYPH_NAMES ) > 0;
}
static FT_Error
cff_ps_get_font_info( CFF_Face face,
PS_FontInfoRec* afont_info )
{
CFF_Font cff = (CFF_Font)face->extra.data;
FT_Error error = CFF_Err_Ok;
if ( cff && cff->font_info == NULL )
{
CFF_FontRecDict dict = &cff->top_font.font_dict;
PS_FontInfoRec *font_info = NULL;
FT_Memory memory = face->root.memory;
if ( FT_ALLOC( font_info, sizeof ( *font_info ) ) )
goto Fail;
font_info->version = cff_index_get_sid_string( cff,
dict->version );
font_info->notice = cff_index_get_sid_string( cff,
dict->notice );
font_info->full_name = cff_index_get_sid_string( cff,
dict->full_name );
font_info->family_name = cff_index_get_sid_string( cff,
dict->family_name );
font_info->weight = cff_index_get_sid_string( cff,
dict->weight );
font_info->italic_angle = dict->italic_angle;
font_info->is_fixed_pitch = dict->is_fixed_pitch;
font_info->underline_position = (FT_Short)dict->underline_position;
font_info->underline_thickness = (FT_Short)dict->underline_thickness;
cff->font_info = font_info;
}
if ( cff )
*afont_info = *cff->font_info;
Fail:
return error;
}
FT_DEFINE_SERVICE_PSINFOREC(cff_service_ps_info,
(PS_GetFontInfoFunc) cff_ps_get_font_info,
(PS_GetFontExtraFunc) NULL,
(PS_HasGlyphNamesFunc) cff_ps_has_glyph_names,
/* unsupported with CFF fonts */
(PS_GetFontPrivateFunc)NULL,
/* not implemented */
(PS_GetFontValueFunc) NULL
)
/*
* POSTSCRIPT NAME SERVICE
*
*/
static const char*
cff_get_ps_name( CFF_Face face )
{
CFF_Font cff = (CFF_Font)face->extra.data;
return (const char*)cff->font_name;
}
FT_DEFINE_SERVICE_PSFONTNAMEREC(cff_service_ps_name,
(FT_PsName_GetFunc)cff_get_ps_name
)
/*
* TT CMAP INFO
*
* If the charmap is a synthetic Unicode encoding cmap or
* a Type 1 standard (or expert) encoding cmap, hide TT CMAP INFO
* service defined in SFNT module.
*
* Otherwise call the service function in the sfnt module.
*
*/
static FT_Error
cff_get_cmap_info( FT_CharMap charmap,
TT_CMapInfo *cmap_info )
{
FT_CMap cmap = FT_CMAP( charmap );
FT_Error error = CFF_Err_Ok;
FT_Face face = FT_CMAP_FACE( cmap );
FT_Library library = FT_FACE_LIBRARY( face );
cmap_info->language = 0;
cmap_info->format = 0;
if ( cmap->clazz != &CFF_CMAP_ENCODING_CLASS_REC_GET &&
cmap->clazz != &CFF_CMAP_UNICODE_CLASS_REC_GET )
{
FT_Module sfnt = FT_Get_Module( library, "sfnt" );
FT_Service_TTCMaps service =
(FT_Service_TTCMaps)ft_module_get_service( sfnt,
FT_SERVICE_ID_TT_CMAP );
if ( service && service->get_cmap_info )
error = service->get_cmap_info( charmap, cmap_info );
}
return error;
}
FT_DEFINE_SERVICE_TTCMAPSREC(cff_service_get_cmap_info,
(TT_CMap_Info_GetFunc)cff_get_cmap_info
)
/*
* CID INFO SERVICE
*
*/
static FT_Error
cff_get_ros( CFF_Face face,
const char* *registry,
const char* *ordering,
FT_Int *supplement )
{
FT_Error error = CFF_Err_Ok;
CFF_Font cff = (CFF_Font)face->extra.data;
if ( cff )
{
CFF_FontRecDict dict = &cff->top_font.font_dict;
if ( dict->cid_registry == 0xFFFFU )
{
error = CFF_Err_Invalid_Argument;
goto Fail;
}
if ( registry )
{
if ( cff->registry == NULL )
cff->registry = cff_index_get_sid_string( cff,
dict->cid_registry );
*registry = cff->registry;
}
if ( ordering )
{
if ( cff->ordering == NULL )
cff->ordering = cff_index_get_sid_string( cff,
dict->cid_ordering );
*ordering = cff->ordering;
}
/*
* XXX: According to Adobe TechNote #5176, the supplement in CFF
* can be a real number. We truncate it to fit public API
* since freetype-2.3.6.
*/
if ( supplement )
{
if ( dict->cid_supplement < FT_INT_MIN ||
dict->cid_supplement > FT_INT_MAX )
FT_TRACE1(( "cff_get_ros: too large supplement %d is truncated\n",
dict->cid_supplement ));
*supplement = (FT_Int)dict->cid_supplement;
}
}
Fail:
return error;
}
static FT_Error
cff_get_is_cid( CFF_Face face,
FT_Bool *is_cid )
{
FT_Error error = CFF_Err_Ok;
CFF_Font cff = (CFF_Font)face->extra.data;
*is_cid = 0;
if ( cff )
{
CFF_FontRecDict dict = &cff->top_font.font_dict;
if ( dict->cid_registry != 0xFFFFU )
*is_cid = 1;
}
return error;
}
static FT_Error
cff_get_cid_from_glyph_index( CFF_Face face,
FT_UInt glyph_index,
FT_UInt *cid )
{
FT_Error error = CFF_Err_Ok;
CFF_Font cff;
cff = (CFF_Font)face->extra.data;
if ( cff )
{
FT_UInt c;
CFF_FontRecDict dict = &cff->top_font.font_dict;
if ( dict->cid_registry == 0xFFFFU )
{
error = CFF_Err_Invalid_Argument;
goto Fail;
}
if ( glyph_index > cff->num_glyphs )
{
error = CFF_Err_Invalid_Argument;
goto Fail;
}
c = cff->charset.sids[glyph_index];
if ( cid )
*cid = c;
}
Fail:
return error;
}
FT_DEFINE_SERVICE_CIDREC(cff_service_cid_info,
(FT_CID_GetRegistryOrderingSupplementFunc)cff_get_ros,
(FT_CID_GetIsInternallyCIDKeyedFunc) cff_get_is_cid,
(FT_CID_GetCIDFromGlyphIndexFunc) cff_get_cid_from_glyph_index
)
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** D R I V E R I N T E R F A C E ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
#ifndef FT_CONFIG_OPTION_NO_GLYPH_NAMES
FT_DEFINE_SERVICEDESCREC6(cff_services,
FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_CFF,
FT_SERVICE_ID_POSTSCRIPT_INFO, &CFF_SERVICE_PS_INFO_GET,
FT_SERVICE_ID_POSTSCRIPT_FONT_NAME, &CFF_SERVICE_PS_NAME_GET,
FT_SERVICE_ID_GLYPH_DICT, &CFF_SERVICE_GLYPH_DICT_GET,
FT_SERVICE_ID_TT_CMAP, &CFF_SERVICE_GET_CMAP_INFO_GET,
FT_SERVICE_ID_CID, &CFF_SERVICE_CID_INFO_GET
)
#else
FT_DEFINE_SERVICEDESCREC5(cff_services,
FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_CFF,
FT_SERVICE_ID_POSTSCRIPT_INFO, &CFF_SERVICE_PS_INFO_GET,
FT_SERVICE_ID_POSTSCRIPT_FONT_NAME, &CFF_SERVICE_PS_NAME_GET,
FT_SERVICE_ID_TT_CMAP, &CFF_SERVICE_GET_CMAP_INFO_GET,
FT_SERVICE_ID_CID, &CFF_SERVICE_CID_INFO_GET
)
#endif
FT_CALLBACK_DEF( FT_Module_Interface )
/* CFF_Driver */
cff_get_interface( FT_Module driver,
const char* module_interface )
{
FT_Library library;
FT_Module sfnt;
FT_Module_Interface result;
/* CFF_SERVICES_GET derefers `library' in PIC mode */
result = ft_service_list_lookup( CFF_SERVICES_GET, module_interface );
if ( result != NULL )
return result;
/* `driver' is not yet evaluated in non-PIC mode */
if ( !driver )
return NULL;
library = driver->library;
if ( !library )
return NULL;
/* we pass our request to the `sfnt' module */
sfnt = FT_Get_Module( library, "sfnt" );
return sfnt ? sfnt->clazz->get_interface( sfnt, module_interface ) : 0;
}
/* The FT_DriverInterface structure is defined in ftdriver.h. */
#define CFF_SIZE_SELECT cff_size_select
FT_DEFINE_DRIVER( cff_driver_class,
FT_MODULE_FONT_DRIVER |
FT_MODULE_DRIVER_SCALABLE |
FT_MODULE_DRIVER_HAS_HINTER,
sizeof ( CFF_DriverRec ),
"cff",
0x10000L,
0x20000L,
/* module-specific interface */
0,
cff_driver_init,
cff_driver_done,
cff_get_interface,
/* now the specific driver fields */
sizeof ( TT_FaceRec ),
sizeof ( CFF_SizeRec ),
sizeof ( CFF_GlyphSlotRec ),
cff_face_init,
cff_face_done,
cff_size_init,
cff_size_done,
cff_slot_init,
cff_slot_done,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
ft_stub_set_char_sizes,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
ft_stub_set_pixel_sizes,
cff_glyph_load,
cff_get_kerning,
/* FT_Face_AttachFunc */
0,
cff_get_advances,
cff_size_request,
CFF_SIZE_SELECT
)
/* END */
/***************************************************************************/
/* */
/* cffparse.c */
/* */
/* CFF token stream parser (body) */
/* */
/* Copyright 1996-2004, 2007-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cffparse
FT_LOCAL_DEF( void )
cff_parser_init( CFF_Parser parser,
FT_UInt code,
void* object,
FT_Library library)
{
FT_MEM_ZERO( parser, sizeof ( *parser ) );
parser->top = parser->stack;
parser->object_code = code;
parser->object = object;
parser->library = library;
}
/* read an integer */
static FT_Long
cff_parse_integer( FT_Byte* start,
FT_Byte* limit )
{
FT_Byte* p = start;
FT_Int v = *p++;
FT_Long val = 0;
if ( v == 28 )
{
if ( p + 2 > limit )
goto Bad;
val = (FT_Short)( ( (FT_Int)p[0] << 8 ) | p[1] );
p += 2;
}
else if ( v == 29 )
{
if ( p + 4 > limit )
goto Bad;
val = ( (FT_Long)p[0] << 24 ) |
( (FT_Long)p[1] << 16 ) |
( (FT_Long)p[2] << 8 ) |
p[3];
p += 4;
}
else if ( v < 247 )
{
val = v - 139;
}
else if ( v < 251 )
{
if ( p + 1 > limit )
goto Bad;
val = ( v - 247 ) * 256 + p[0] + 108;
p++;
}
else
{
if ( p + 1 > limit )
goto Bad;
val = -( v - 251 ) * 256 - p[0] - 108;
p++;
}
Exit:
return val;
Bad:
val = 0;
FT_TRACE4(( "!!!END OF DATA:!!!" ));
goto Exit;
}
static const FT_Long power_tens[] =
{
1L,
10L,
100L,
1000L,
10000L,
100000L,
1000000L,
10000000L,
100000000L,
1000000000L
};
/* read a real */
static FT_Fixed
cff_parse_real( FT_Byte* start,
FT_Byte* limit,
FT_Long power_ten,
FT_Long* scaling )
{
FT_Byte* p = start;
FT_UInt nib;
FT_UInt phase;
FT_Long result, number, exponent;
FT_Int sign = 0, exponent_sign = 0, have_overflow = 0;
FT_Long exponent_add, integer_length, fraction_length;
if ( scaling )
*scaling = 0;
result = 0;
number = 0;
exponent = 0;
exponent_add = 0;
integer_length = 0;
fraction_length = 0;
/* First of all, read the integer part. */
phase = 4;
for (;;)
{
/* If we entered this iteration with phase == 4, we need to */
/* read a new byte. This also skips past the initial 0x1E. */
if ( phase )
{
p++;
/* Make sure we don't read past the end. */
if ( p >= limit )
goto Bad;
}
/* Get the nibble. */
nib = ( p[0] >> phase ) & 0xF;
phase = 4 - phase;
if ( nib == 0xE )
sign = 1;
else if ( nib > 9 )
break;
else
{
/* Increase exponent if we can't add the digit. */
if ( number >= 0xCCCCCCCL )
exponent_add++;
/* Skip leading zeros. */
else if ( nib || number )
{
integer_length++;
number = number * 10 + nib;
}
}
}
/* Read fraction part, if any. */
if ( nib == 0xa )
for (;;)
{
/* If we entered this iteration with phase == 4, we need */
/* to read a new byte. */
if ( phase )
{
p++;
/* Make sure we don't read past the end. */
if ( p >= limit )
goto Bad;
}
/* Get the nibble. */
nib = ( p[0] >> phase ) & 0xF;
phase = 4 - phase;
if ( nib >= 10 )
break;
/* Skip leading zeros if possible. */
if ( !nib && !number )
exponent_add--;
/* Only add digit if we don't overflow. */
else if ( number < 0xCCCCCCCL && fraction_length < 9 )
{
fraction_length++;
number = number * 10 + nib;
}
}
/* Read exponent, if any. */
if ( nib == 12 )
{
exponent_sign = 1;
nib = 11;
}
if ( nib == 11 )
{
for (;;)
{
/* If we entered this iteration with phase == 4, */
/* we need to read a new byte. */
if ( phase )
{
p++;
/* Make sure we don't read past the end. */
if ( p >= limit )
goto Bad;
}
/* Get the nibble. */
nib = ( p[0] >> phase ) & 0xF;
phase = 4 - phase;
if ( nib >= 10 )
break;
/* Arbitrarily limit exponent. */
if ( exponent > 1000 )
have_overflow = 1;
else
exponent = exponent * 10 + nib;
}
if ( exponent_sign )
exponent = -exponent;
}
if ( !number )
goto Exit;
if ( have_overflow )
{
if ( exponent_sign )
goto Underflow;
else
goto Overflow;
}
/* We don't check `power_ten' and `exponent_add'. */
exponent += power_ten + exponent_add;
if ( scaling )
{
/* Only use `fraction_length'. */
fraction_length += integer_length;
exponent += integer_length;
if ( fraction_length <= 5 )
{
if ( number > 0x7FFFL )
{
result = FT_DivFix( number, 10 );
*scaling = exponent - fraction_length + 1;
}
else
{
if ( exponent > 0 )
{
FT_Long new_fraction_length, shift;
/* Make `scaling' as small as possible. */
new_fraction_length = FT_MIN( exponent, 5 );
shift = new_fraction_length - fraction_length;
if ( shift > 0 )
{
exponent -= new_fraction_length;
number *= power_tens[shift];
if ( number > 0x7FFFL )
{
number /= 10;
exponent += 1;
}
}
else
exponent -= fraction_length;
}
else
exponent -= fraction_length;
result = number << 16;
*scaling = exponent;
}
}
else
{
if ( ( number / power_tens[fraction_length - 5] ) > 0x7FFFL )
{
result = FT_DivFix( number, power_tens[fraction_length - 4] );
*scaling = exponent - 4;
}
else
{
result = FT_DivFix( number, power_tens[fraction_length - 5] );
*scaling = exponent - 5;
}
}
}
else
{
integer_length += exponent;
fraction_length -= exponent;
if ( integer_length > 5 )
goto Overflow;
if ( integer_length < -5 )
goto Underflow;
/* Remove non-significant digits. */
if ( integer_length < 0 )
{
number /= power_tens[-integer_length];
fraction_length += integer_length;
}
/* this can only happen if exponent was non-zero */
if ( fraction_length == 10 )
{
number /= 10;
fraction_length -= 1;
}
/* Convert into 16.16 format. */
if ( fraction_length > 0 )
{
if ( ( number / power_tens[fraction_length] ) > 0x7FFFL )
goto Exit;
result = FT_DivFix( number, power_tens[fraction_length] );
}
else
{
number *= power_tens[-fraction_length];
if ( number > 0x7FFFL )
goto Overflow;
result = number << 16;
}
}
Exit:
if ( sign )
result = -result;
return result;
Overflow:
result = 0x7FFFFFFFL;
FT_TRACE4(( "!!!OVERFLOW:!!!" ));
goto Exit;
Underflow:
result = 0;
FT_TRACE4(( "!!!UNDERFLOW:!!!" ));
goto Exit;
Bad:
result = 0;
FT_TRACE4(( "!!!END OF DATA:!!!" ));
goto Exit;
}
/* read a number, either integer or real */
static FT_Long
cff_parse_num( FT_Byte** d )
{
return **d == 30 ? ( cff_parse_real( d[0], d[1], 0, NULL ) >> 16 )
: cff_parse_integer( d[0], d[1] );
}
/* read a floating point number, either integer or real */
static FT_Fixed
do_fixed( FT_Byte** d,
FT_Long scaling )
{
if ( **d == 30 )
return cff_parse_real( d[0], d[1], scaling, NULL );
else
{
FT_Long val = cff_parse_integer( d[0], d[1] );
if ( scaling )
val *= power_tens[scaling];
if ( val > 0x7FFF )
{
val = 0x7FFFFFFFL;
goto Overflow;
}
else if ( val < -0x7FFF )
{
val = -0x7FFFFFFFL;
goto Overflow;
}
return val << 16;
Overflow:
FT_TRACE4(( "!!!OVERFLOW:!!!" ));
return val;
}
}
/* read a floating point number, either integer or real */
static FT_Fixed
cff_parse_fixed( FT_Byte** d )
{
return do_fixed( d, 0 );
}
/* read a floating point number, either integer or real, */
/* but return `10^scaling' times the number read in */
static FT_Fixed
cff_parse_fixed_scaled( FT_Byte** d,
FT_Long scaling )
{
return do_fixed( d, scaling );
}
/* read a floating point number, either integer or real, */
/* and return it as precise as possible -- `scaling' returns */
/* the scaling factor (as a power of 10) */
static FT_Fixed
cff_parse_fixed_dynamic( FT_Byte** d,
FT_Long* scaling )
{
FT_ASSERT( scaling );
if ( **d == 30 )
return cff_parse_real( d[0], d[1], 0, scaling );
else
{
FT_Long number;
FT_Int integer_length;
number = cff_parse_integer( d[0], d[1] );
if ( number > 0x7FFFL )
{
for ( integer_length = 5; integer_length < 10; integer_length++ )
if ( number < power_tens[integer_length] )
break;
if ( ( number / power_tens[integer_length - 5] ) > 0x7FFFL )
{
*scaling = integer_length - 4;
return FT_DivFix( number, power_tens[integer_length - 4] );
}
else
{
*scaling = integer_length - 5;
return FT_DivFix( number, power_tens[integer_length - 5] );
}
}
else
{
*scaling = 0;
return number << 16;
}
}
}
static FT_Error
cff_parse_font_matrix( CFF_Parser parser )
{
CFF_FontRecDict dict = (CFF_FontRecDict)parser->object;
FT_Matrix* matrix = &dict->font_matrix;
FT_Vector* offset = &dict->font_offset;
FT_ULong* upm = &dict->units_per_em;
FT_Byte** data = parser->stack;
FT_Error error = CFF_Err_Stack_Underflow;
if ( parser->top >= parser->stack + 6 )
{
FT_Long scaling;
error = CFF_Err_Ok;
dict->has_font_matrix = TRUE;
/* We expect a well-formed font matrix, this is, the matrix elements */
/* `xx' and `yy' are of approximately the same magnitude. To avoid */
/* loss of precision, we use the magnitude of element `xx' to scale */
/* all other elements. The scaling factor is then contained in the */
/* `units_per_em' value. */
matrix->xx = cff_parse_fixed_dynamic( data++, &scaling );
scaling = -scaling;
if ( scaling < 0 || scaling > 9 )
{
/* Return default matrix in case of unlikely values. */
FT_TRACE1(( "cff_parse_font_matrix:"
" strange scaling value for xx element (%d),\n"
" "
" using default matrix\n", scaling ));
matrix->xx = 0x10000L;
matrix->yx = 0;
matrix->xy = 0;
matrix->yy = 0x10000L;
offset->x = 0;
offset->y = 0;
*upm = 1;
goto Exit;
}
matrix->yx = cff_parse_fixed_scaled( data++, scaling );
matrix->xy = cff_parse_fixed_scaled( data++, scaling );
matrix->yy = cff_parse_fixed_scaled( data++, scaling );
offset->x = cff_parse_fixed_scaled( data++, scaling );
offset->y = cff_parse_fixed_scaled( data, scaling );
*upm = power_tens[scaling];
FT_TRACE4(( " [%f %f %f %f %f %f]\n",
(double)matrix->xx / *upm / 65536,
(double)matrix->xy / *upm / 65536,
(double)matrix->yx / *upm / 65536,
(double)matrix->yy / *upm / 65536,
(double)offset->x / *upm / 65536,
(double)offset->y / *upm / 65536 ));
}
Exit:
return error;
}
static FT_Error
cff_parse_font_bbox( CFF_Parser parser )
{
CFF_FontRecDict dict = (CFF_FontRecDict)parser->object;
FT_BBox* bbox = &dict->font_bbox;
FT_Byte** data = parser->stack;
FT_Error error;
error = CFF_Err_Stack_Underflow;
if ( parser->top >= parser->stack + 4 )
{
bbox->xMin = FT_RoundFix( cff_parse_fixed( data++ ) );
bbox->yMin = FT_RoundFix( cff_parse_fixed( data++ ) );
bbox->xMax = FT_RoundFix( cff_parse_fixed( data++ ) );
bbox->yMax = FT_RoundFix( cff_parse_fixed( data ) );
error = CFF_Err_Ok;
FT_TRACE4(( " [%d %d %d %d]\n",
bbox->xMin / 65536,
bbox->yMin / 65536,
bbox->xMax / 65536,
bbox->yMax / 65536 ));
}
return error;
}
static FT_Error
cff_parse_private_dict( CFF_Parser parser )
{
CFF_FontRecDict dict = (CFF_FontRecDict)parser->object;
FT_Byte** data = parser->stack;
FT_Error error;
error = CFF_Err_Stack_Underflow;
if ( parser->top >= parser->stack + 2 )
{
dict->private_size = cff_parse_num( data++ );
dict->private_offset = cff_parse_num( data );
FT_TRACE4(( " %lu %lu\n",
dict->private_size, dict->private_offset ));
error = CFF_Err_Ok;
}
return error;
}
static FT_Error
cff_parse_cid_ros( CFF_Parser parser )
{
CFF_FontRecDict dict = (CFF_FontRecDict)parser->object;
FT_Byte** data = parser->stack;
FT_Error error;
error = CFF_Err_Stack_Underflow;
if ( parser->top >= parser->stack + 3 )
{
dict->cid_registry = (FT_UInt)cff_parse_num( data++ );
dict->cid_ordering = (FT_UInt)cff_parse_num( data++ );
if ( **data == 30 )
FT_TRACE1(( "cff_parse_cid_ros: real supplement is rounded\n" ));
dict->cid_supplement = cff_parse_num( data );
if ( dict->cid_supplement < 0 )
FT_TRACE1(( "cff_parse_cid_ros: negative supplement %d is found\n",
dict->cid_supplement ));
error = CFF_Err_Ok;
FT_TRACE4(( " %d %d %d\n",
dict->cid_registry,
dict->cid_ordering,
dict->cid_supplement ));
}
return error;
}
#define CFF_FIELD_NUM( code, name, id ) \
CFF_FIELD( code, name, id, cff_kind_num )
#define CFF_FIELD_FIXED( code, name, id ) \
CFF_FIELD( code, name, id, cff_kind_fixed )
#define CFF_FIELD_FIXED_1000( code, name, id ) \
CFF_FIELD( code, name, id, cff_kind_fixed_thousand )
#define CFF_FIELD_STRING( code, name, id ) \
CFF_FIELD( code, name, id, cff_kind_string )
#define CFF_FIELD_BOOL( code, name, id ) \
CFF_FIELD( code, name, id, cff_kind_bool )
#define CFFCODE_TOPDICT 0x1000
#define CFFCODE_PRIVATE 0x2000
#undef CFF_FIELD
#undef CFF_FIELD_DELTA
#define CFF_FIELD_CALLBACK( code, name, id ) \
{ \
cff_kind_callback, \
code | CFFCODE, \
0, 0, \
cff_parse_ ## name, \
0, 0 \
},
#define CFF_FIELD( code, name, id, kind ) \
{ \
kind, \
code | CFFCODE, \
FT_FIELD_OFFSET( name ), \
FT_FIELD_SIZE( name ), \
0, 0, 0 \
},
#define CFF_FIELD_DELTA( code, name, max, id ) \
{ \
cff_kind_delta, \
code | CFFCODE, \
FT_FIELD_OFFSET( name ), \
FT_FIELD_SIZE_DELTA( name ), \
0, \
max, \
FT_FIELD_OFFSET( num_ ## name ) \
},
static const CFF_Field_Handler cff_field_handlers[] =
{
/***************************************************************************/
/* */
/* cfftoken.h */
/* */
/* CFF token definitions (specification only). */
/* */
/* Copyright 1996-2003, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#undef FT_STRUCTURE
#define FT_STRUCTURE CFF_FontRecDictRec
#undef CFFCODE
#define CFFCODE CFFCODE_TOPDICT
CFF_FIELD_STRING ( 0, version, "Version" )
CFF_FIELD_STRING ( 1, notice, "Notice" )
CFF_FIELD_STRING ( 0x100, copyright, "Copyright" )
CFF_FIELD_STRING ( 2, full_name, "FullName" )
CFF_FIELD_STRING ( 3, family_name, "FamilyName" )
CFF_FIELD_STRING ( 4, weight, "Weight" )
CFF_FIELD_BOOL ( 0x101, is_fixed_pitch, "isFixedPitch" )
CFF_FIELD_FIXED ( 0x102, italic_angle, "ItalicAngle" )
CFF_FIELD_FIXED ( 0x103, underline_position, "UnderlinePosition" )
CFF_FIELD_FIXED ( 0x104, underline_thickness, "UnderlineThickness" )
CFF_FIELD_NUM ( 0x105, paint_type, "PaintType" )
CFF_FIELD_NUM ( 0x106, charstring_type, "CharstringType" )
CFF_FIELD_CALLBACK( 0x107, font_matrix, "FontMatrix" )
CFF_FIELD_NUM ( 13, unique_id, "UniqueID" )
CFF_FIELD_CALLBACK( 5, font_bbox, "FontBBox" )
CFF_FIELD_NUM ( 0x108, stroke_width, "StrokeWidth" )
CFF_FIELD_NUM ( 15, charset_offset, "charset" )
CFF_FIELD_NUM ( 16, encoding_offset, "Encoding" )
CFF_FIELD_NUM ( 17, charstrings_offset, "CharStrings" )
CFF_FIELD_CALLBACK( 18, private_dict, "Private" )
CFF_FIELD_NUM ( 0x114, synthetic_base, "SyntheticBase" )
CFF_FIELD_STRING ( 0x115, embedded_postscript, "PostScript" )
#if 0
CFF_FIELD_STRING ( 0x116, base_font_name, "BaseFontName" )
CFF_FIELD_DELTA ( 0x117, base_font_blend, 16, "BaseFontBlend" )
CFF_FIELD_CALLBACK( 0x118, multiple_master, "MultipleMaster" )
CFF_FIELD_CALLBACK( 0x119, blend_axis_types, "BlendAxisTypes" )
#endif
CFF_FIELD_CALLBACK( 0x11E, cid_ros, "ROS" )
CFF_FIELD_NUM ( 0x11F, cid_font_version, "CIDFontVersion" )
CFF_FIELD_NUM ( 0x120, cid_font_revision, "CIDFontRevision" )
CFF_FIELD_NUM ( 0x121, cid_font_type, "CIDFontType" )
CFF_FIELD_NUM ( 0x122, cid_count, "CIDCount" )
CFF_FIELD_NUM ( 0x123, cid_uid_base, "UIDBase" )
CFF_FIELD_NUM ( 0x124, cid_fd_array_offset, "FDArray" )
CFF_FIELD_NUM ( 0x125, cid_fd_select_offset, "FDSelect" )
CFF_FIELD_STRING ( 0x126, cid_font_name, "FontName" )
#if 0
CFF_FIELD_NUM ( 0x127, chameleon, "Chameleon" )
#endif
#undef FT_STRUCTURE
#define FT_STRUCTURE CFF_PrivateRec
#undef CFFCODE
#define CFFCODE CFFCODE_PRIVATE
CFF_FIELD_DELTA ( 6, blue_values, 14, "BlueValues" )
CFF_FIELD_DELTA ( 7, other_blues, 10, "OtherBlues" )
CFF_FIELD_DELTA ( 8, family_blues, 14, "FamilyBlues" )
CFF_FIELD_DELTA ( 9, family_other_blues, 10, "FamilyOtherBlues" )
CFF_FIELD_FIXED_1000( 0x109, blue_scale, "BlueScale" )
CFF_FIELD_NUM ( 0x10A, blue_shift, "BlueShift" )
CFF_FIELD_NUM ( 0x10B, blue_fuzz, "BlueFuzz" )
CFF_FIELD_NUM ( 10, standard_width, "StdHW" )
CFF_FIELD_NUM ( 11, standard_height, "StdVW" )
CFF_FIELD_DELTA ( 0x10C, snap_widths, 13, "StemSnapH" )
CFF_FIELD_DELTA ( 0x10D, snap_heights, 13, "StemSnapV" )
CFF_FIELD_BOOL ( 0x10E, force_bold, "ForceBold" )
CFF_FIELD_FIXED ( 0x10F, force_bold_threshold, "ForceBoldThreshold" )
CFF_FIELD_NUM ( 0x110, lenIV, "lenIV" )
CFF_FIELD_NUM ( 0x111, language_group, "LanguageGroup" )
CFF_FIELD_FIXED ( 0x112, expansion_factor, "ExpansionFactor" )
CFF_FIELD_NUM ( 0x113, initial_random_seed, "initialRandomSeed" )
CFF_FIELD_NUM ( 19, local_subrs_offset, "Subrs" )
CFF_FIELD_NUM ( 20, default_width, "defaultWidthX" )
CFF_FIELD_NUM ( 21, nominal_width, "nominalWidthX" )
/* END */
{ 0, 0, 0, 0, 0, 0, 0 }
};
FT_LOCAL_DEF( FT_Error )
cff_parser_run( CFF_Parser parser,
FT_Byte* start,
FT_Byte* limit )
{
FT_Byte* p = start;
FT_Error error = CFF_Err_Ok;
FT_Library library = parser->library;
FT_UNUSED( library );
parser->top = parser->stack;
parser->start = start;
parser->limit = limit;
parser->cursor = start;
while ( p < limit )
{
FT_UInt v = *p;
if ( v >= 27 && v != 31 )
{
/* it's a number; we will push its position on the stack */
if ( parser->top - parser->stack >= CFF_MAX_STACK_DEPTH )
goto Stack_Overflow;
*parser->top ++ = p;
/* now, skip it */
if ( v == 30 )
{
/* skip real number */
p++;
for (;;)
{
/* An unterminated floating point number at the */
/* end of a dictionary is invalid but harmless. */
if ( p >= limit )
goto Exit;
v = p[0] >> 4;
if ( v == 15 )
break;
v = p[0] & 0xF;
if ( v == 15 )
break;
p++;
}
}
else if ( v == 28 )
p += 2;
else if ( v == 29 )
p += 4;
else if ( v > 246 )
p += 1;
}
else
{
/* This is not a number, hence it's an operator. Compute its code */
/* and look for it in our current list. */
FT_UInt code;
FT_UInt num_args = (FT_UInt)
( parser->top - parser->stack );
const CFF_Field_Handler* field;
*parser->top = p;
code = v;
if ( v == 12 )
{
/* two byte operator */
p++;
if ( p >= limit )
goto Syntax_Error;
code = 0x100 | p[0];
}
code = code | parser->object_code;
for ( field = CFF_FIELD_HANDLERS_GET; field->kind; field++ )
{
if ( field->code == (FT_Int)code )
{
/* we found our field's handler; read it */
FT_Long val;
FT_Byte* q = (FT_Byte*)parser->object + field->offset;
/* check that we have enough arguments -- except for */
/* delta encoded arrays, which can be empty */
if ( field->kind != cff_kind_delta && num_args < 1 )
goto Stack_Underflow;
switch ( field->kind )
{
case cff_kind_bool:
case cff_kind_string:
case cff_kind_num:
val = cff_parse_num( parser->stack );
goto Store_Number;
case cff_kind_fixed:
val = cff_parse_fixed( parser->stack );
goto Store_Number;
case cff_kind_fixed_thousand:
val = cff_parse_fixed_scaled( parser->stack, 3 );
Store_Number:
switch ( field->size )
{
case (8 / FT_CHAR_BIT):
*(FT_Byte*)q = (FT_Byte)val;
break;
case (16 / FT_CHAR_BIT):
*(FT_Short*)q = (FT_Short)val;
break;
case (32 / FT_CHAR_BIT):
*(FT_Int32*)q = (FT_Int)val;
break;
/* for 64-bit systems */
default:
*(FT_Long*)q = val;
}
break;
case cff_kind_delta:
{
FT_Byte* qcount = (FT_Byte*)parser->object +
field->count_offset;
FT_Byte** data = parser->stack;
if ( num_args > field->array_max )
num_args = field->array_max;
FT_TRACE4(( " [" ));
/* store count */
*qcount = (FT_Byte)num_args;
val = 0;
while ( num_args > 0 )
{
val += cff_parse_num( data++ );
switch ( field->size )
{
case (8 / FT_CHAR_BIT):
*(FT_Byte*)q = (FT_Byte)val;
break;
case (16 / FT_CHAR_BIT):
*(FT_Short*)q = (FT_Short)val;
break;
case (32 / FT_CHAR_BIT):
*(FT_Int32*)q = (FT_Int)val;
break;
/* for 64-bit systems */
default:
*(FT_Long*)q = val;
}
FT_TRACE4(( " %ld", val ));
q += field->size;
num_args--;
}
FT_TRACE4(( "]\n" ));
}
break;
/* callback */
default:
error = field->reader( parser );
if ( error )
goto Exit;
}
goto Found;
}
}
/* this is an unknown operator, or it is unsupported; */
/* we will ignore it for now. */
Found:
/* clear stack */
parser->top = parser->stack;
}
p++;
}
Exit:
return error;
Stack_Overflow:
error = CFF_Err_Invalid_Argument;
goto Exit;
Stack_Underflow:
error = CFF_Err_Invalid_Argument;
goto Exit;
Syntax_Error:
error = CFF_Err_Invalid_Argument;
goto Exit;
}
/* END */
/***************************************************************************/
/* */
/* cffload.c */
/* */
/* OpenType and CFF data/program tables loader (body). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#if 1
static const FT_UShort cff_isoadobe_charset[229] =
{
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63,
64, 65, 66, 67, 68, 69, 70, 71,
72, 73, 74, 75, 76, 77, 78, 79,
80, 81, 82, 83, 84, 85, 86, 87,
88, 89, 90, 91, 92, 93, 94, 95,
96, 97, 98, 99, 100, 101, 102, 103,
104, 105, 106, 107, 108, 109, 110, 111,
112, 113, 114, 115, 116, 117, 118, 119,
120, 121, 122, 123, 124, 125, 126, 127,
128, 129, 130, 131, 132, 133, 134, 135,
136, 137, 138, 139, 140, 141, 142, 143,
144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159,
160, 161, 162, 163, 164, 165, 166, 167,
168, 169, 170, 171, 172, 173, 174, 175,
176, 177, 178, 179, 180, 181, 182, 183,
184, 185, 186, 187, 188, 189, 190, 191,
192, 193, 194, 195, 196, 197, 198, 199,
200, 201, 202, 203, 204, 205, 206, 207,
208, 209, 210, 211, 212, 213, 214, 215,
216, 217, 218, 219, 220, 221, 222, 223,
224, 225, 226, 227, 228
};
static const FT_UShort cff_expert_charset[166] =
{
0, 1, 229, 230, 231, 232, 233, 234,
235, 236, 237, 238, 13, 14, 15, 99,
239, 240, 241, 242, 243, 244, 245, 246,
247, 248, 27, 28, 249, 250, 251, 252,
253, 254, 255, 256, 257, 258, 259, 260,
261, 262, 263, 264, 265, 266, 109, 110,
267, 268, 269, 270, 271, 272, 273, 274,
275, 276, 277, 278, 279, 280, 281, 282,
283, 284, 285, 286, 287, 288, 289, 290,
291, 292, 293, 294, 295, 296, 297, 298,
299, 300, 301, 302, 303, 304, 305, 306,
307, 308, 309, 310, 311, 312, 313, 314,
315, 316, 317, 318, 158, 155, 163, 319,
320, 321, 322, 323, 324, 325, 326, 150,
164, 169, 327, 328, 329, 330, 331, 332,
333, 334, 335, 336, 337, 338, 339, 340,
341, 342, 343, 344, 345, 346, 347, 348,
349, 350, 351, 352, 353, 354, 355, 356,
357, 358, 359, 360, 361, 362, 363, 364,
365, 366, 367, 368, 369, 370, 371, 372,
373, 374, 375, 376, 377, 378
};
static const FT_UShort cff_expertsubset_charset[87] =
{
0, 1, 231, 232, 235, 236, 237, 238,
13, 14, 15, 99, 239, 240, 241, 242,
243, 244, 245, 246, 247, 248, 27, 28,
249, 250, 251, 253, 254, 255, 256, 257,
258, 259, 260, 261, 262, 263, 264, 265,
266, 109, 110, 267, 268, 269, 270, 272,
300, 301, 302, 305, 314, 315, 158, 155,
163, 320, 321, 322, 323, 324, 325, 326,
150, 164, 169, 327, 328, 329, 330, 331,
332, 333, 334, 335, 336, 337, 338, 339,
340, 341, 342, 343, 344, 345, 346
};
static const FT_UShort cff_standard_encoding[256] =
{
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
1, 2, 3, 4, 5, 6, 7, 8,
9, 10, 11, 12, 13, 14, 15, 16,
17, 18, 19, 20, 21, 22, 23, 24,
25, 26, 27, 28, 29, 30, 31, 32,
33, 34, 35, 36, 37, 38, 39, 40,
41, 42, 43, 44, 45, 46, 47, 48,
49, 50, 51, 52, 53, 54, 55, 56,
57, 58, 59, 60, 61, 62, 63, 64,
65, 66, 67, 68, 69, 70, 71, 72,
73, 74, 75, 76, 77, 78, 79, 80,
81, 82, 83, 84, 85, 86, 87, 88,
89, 90, 91, 92, 93, 94, 95, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 96, 97, 98, 99, 100, 101, 102,
103, 104, 105, 106, 107, 108, 109, 110,
0, 111, 112, 113, 114, 0, 115, 116,
117, 118, 119, 120, 121, 122, 0, 123,
0, 124, 125, 126, 127, 128, 129, 130,
131, 0, 132, 133, 0, 134, 135, 136,
137, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 138, 0, 139, 0, 0, 0, 0,
140, 141, 142, 143, 0, 0, 0, 0,
0, 144, 0, 0, 0, 145, 0, 0,
146, 147, 148, 149, 0, 0, 0, 0
};
static const FT_UShort cff_expert_encoding[256] =
{
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
1, 229, 230, 0, 231, 232, 233, 234,
235, 236, 237, 238, 13, 14, 15, 99,
239, 240, 241, 242, 243, 244, 245, 246,
247, 248, 27, 28, 249, 250, 251, 252,
0, 253, 254, 255, 256, 257, 0, 0,
0, 258, 0, 0, 259, 260, 261, 262,
0, 0, 263, 264, 265, 0, 266, 109,
110, 267, 268, 269, 0, 270, 271, 272,
273, 274, 275, 276, 277, 278, 279, 280,
281, 282, 283, 284, 285, 286, 287, 288,
289, 290, 291, 292, 293, 294, 295, 296,
297, 298, 299, 300, 301, 302, 303, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 304, 305, 306, 0, 0, 307, 308,
309, 310, 311, 0, 312, 0, 0, 312,
0, 0, 314, 315, 0, 0, 316, 317,
318, 0, 0, 0, 158, 155, 163, 319,
320, 321, 322, 323, 324, 325, 0, 0,
326, 150, 164, 169, 327, 328, 329, 330,
331, 332, 333, 334, 335, 336, 337, 338,
339, 340, 341, 342, 343, 344, 345, 346,
347, 348, 349, 350, 351, 352, 353, 354,
355, 356, 357, 358, 359, 360, 361, 362,
363, 364, 365, 366, 367, 368, 369, 370,
371, 372, 373, 374, 375, 376, 377, 378
};
/* 1 */
#endif
FT_LOCAL_DEF( FT_UShort )
cff_get_standard_encoding( FT_UInt charcode )
{
return (FT_UShort)( charcode < 256 ? cff_standard_encoding[charcode]
: 0 );
}
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cffload
/* read an offset from the index's stream current position */
static FT_ULong
cff_index_read_offset( CFF_Index idx,
FT_Error *errorp )
{
FT_Error error;
FT_Stream stream = idx->stream;
FT_Byte tmp[4];
FT_ULong result = 0;
if ( !FT_STREAM_READ( tmp, idx->off_size ) )
{
FT_Int nn;
for ( nn = 0; nn < idx->off_size; nn++ )
result = ( result << 8 ) | tmp[nn];
}
*errorp = error;
return result;
}
static FT_Error
cff_index_init( CFF_Index idx,
FT_Stream stream,
FT_Bool load )
{
FT_Error error;
FT_Memory memory = stream->memory;
FT_UShort count;
FT_MEM_ZERO( idx, sizeof ( *idx ) );
idx->stream = stream;
idx->start = FT_STREAM_POS();
if ( !FT_READ_USHORT( count ) &&
count > 0 )
{
FT_Byte offsize;
FT_ULong size;
/* there is at least one element; read the offset size, */
/* then access the offset table to compute the index's total size */
if ( FT_READ_BYTE( offsize ) )
goto Exit;
if ( offsize < 1 || offsize > 4 )
{
error = CFF_Err_Invalid_Table;
goto Exit;
}
idx->count = count;
idx->off_size = offsize;
size = (FT_ULong)( count + 1 ) * offsize;
idx->data_offset = idx->start + 3 + size;
if ( FT_STREAM_SKIP( size - offsize ) )
goto Exit;
size = cff_index_read_offset( idx, &error );
if ( error )
goto Exit;
if ( size == 0 )
{
error = CFF_Err_Invalid_Table;
goto Exit;
}
idx->data_size = --size;
if ( load )
{
/* load the data */
if ( FT_FRAME_EXTRACT( size, idx->bytes ) )
goto Exit;
}
else
{
/* skip the data */
if ( FT_STREAM_SKIP( size ) )
goto Exit;
}
}
Exit:
if ( error )
FT_FREE( idx->offsets );
return error;
}
static void
cff_index_done( CFF_Index idx )
{
if ( idx->stream )
{
FT_Stream stream = idx->stream;
FT_Memory memory = stream->memory;
if ( idx->bytes )
FT_FRAME_RELEASE( idx->bytes );
FT_FREE( idx->offsets );
FT_MEM_ZERO( idx, sizeof ( *idx ) );
}
}
static FT_Error
cff_index_load_offsets( CFF_Index idx )
{
FT_Error error = CFF_Err_Ok;
FT_Stream stream = idx->stream;
FT_Memory memory = stream->memory;
if ( idx->count > 0 && idx->offsets == NULL )
{
FT_Byte offsize = idx->off_size;
FT_ULong data_size;
FT_Byte* p;
FT_Byte* p_end;
FT_ULong* poff;
data_size = (FT_ULong)( idx->count + 1 ) * offsize;
if ( FT_NEW_ARRAY( idx->offsets, idx->count + 1 ) ||
FT_STREAM_SEEK( idx->start + 3 ) ||
FT_FRAME_ENTER( data_size ) )
goto Exit;
poff = idx->offsets;
p = (FT_Byte*)stream->cursor;
p_end = p + data_size;
switch ( offsize )
{
case 1:
for ( ; p < p_end; p++, poff++ )
poff[0] = p[0];
break;
case 2:
for ( ; p < p_end; p += 2, poff++ )
poff[0] = FT_PEEK_USHORT( p );
break;
case 3:
for ( ; p < p_end; p += 3, poff++ )
poff[0] = FT_PEEK_OFF3( p );
break;
default:
for ( ; p < p_end; p += 4, poff++ )
poff[0] = FT_PEEK_ULONG( p );
}
FT_FRAME_EXIT();
}
Exit:
if ( error )
FT_FREE( idx->offsets );
return error;
}
/* Allocate a table containing pointers to an index's elements. */
/* The `pool' argument makes this function convert the index */
/* entries to C-style strings (this is, NULL-terminated). */
static FT_Error
cff_index_get_pointers( CFF_Index idx,
FT_Byte*** table,
FT_Byte** pool )
{
FT_Error error = CFF_Err_Ok;
FT_Memory memory = idx->stream->memory;
FT_Byte** t = NULL;
FT_Byte* new_bytes = NULL;
*table = NULL;
if ( idx->offsets == NULL )
{
error = cff_index_load_offsets( idx );
if ( error )
goto Exit;
}
if ( idx->count > 0 &&
!FT_NEW_ARRAY( t, idx->count + 1 ) &&
( !pool || !FT_ALLOC( new_bytes,
idx->data_size + idx->count ) ) )
{
FT_ULong n, cur_offset;
FT_ULong extra = 0;
FT_Byte* org_bytes = idx->bytes;
/* at this point, `idx->offsets' can't be NULL */
cur_offset = idx->offsets[0] - 1;
/* sanity check */
if ( cur_offset >= idx->data_size )
{
FT_TRACE0(( "cff_index_get_pointers:"
" invalid first offset value %d set to zero\n",
cur_offset ));
cur_offset = 0;
}
if ( !pool )
t[0] = org_bytes + cur_offset;
else
t[0] = new_bytes + cur_offset;
for ( n = 1; n <= idx->count; n++ )
{
FT_ULong next_offset = idx->offsets[n] - 1;
/* empty slot + two sanity checks for invalid offset tables */
if ( next_offset == 0 ||
next_offset < cur_offset ||
( next_offset >= idx->data_size && n < idx->count ) )
next_offset = cur_offset;
if ( !pool )
t[n] = org_bytes + next_offset;
else
{
t[n] = new_bytes + next_offset + extra;
if ( next_offset != cur_offset )
{
FT_MEM_COPY( t[n - 1], org_bytes + cur_offset, t[n] - t[n - 1] );
t[n][0] = '\0';
t[n] += 1;
extra++;
}
}
cur_offset = next_offset;
}
*table = t;
if ( pool )
*pool = new_bytes;
}
Exit:
return error;
}
FT_LOCAL_DEF( FT_Error )
cff_index_access_element( CFF_Index idx,
FT_UInt element,
FT_Byte** pbytes,
FT_ULong* pbyte_len )
{
FT_Error error = CFF_Err_Ok;
if ( idx && idx->count > element )
{
/* compute start and end offsets */
FT_Stream stream = idx->stream;
FT_ULong off1, off2 = 0;
/* load offsets from file or the offset table */
if ( !idx->offsets )
{
FT_ULong pos = element * idx->off_size;
if ( FT_STREAM_SEEK( idx->start + 3 + pos ) )
goto Exit;
off1 = cff_index_read_offset( idx, &error );
if ( error )
goto Exit;
if ( off1 != 0 )
{
do
{
element++;
off2 = cff_index_read_offset( idx, &error );
}
while ( off2 == 0 && element < idx->count );
}
}
/* use offsets table */
else
{
off1 = idx->offsets[element];
if ( off1 )
{
do
{
element++;
off2 = idx->offsets[element];
} while ( off2 == 0 && element < idx->count );
}
}
/* XXX: should check off2 does not exceed the end of this entry; */
/* at present, only truncate off2 at the end of this stream */
if ( off2 > stream->size + 1 ||
idx->data_offset > stream->size - off2 + 1 )
{
FT_ERROR(( "cff_index_access_element:"
" offset to next entry (%d)"
" exceeds the end of stream (%d)\n",
off2, stream->size - idx->data_offset + 1 ));
off2 = stream->size - idx->data_offset + 1;
}
/* access element */
if ( off1 && off2 > off1 )
{
*pbyte_len = off2 - off1;
if ( idx->bytes )
{
/* this index was completely loaded in memory, that's easy */
*pbytes = idx->bytes + off1 - 1;
}
else
{
/* this index is still on disk/file, access it through a frame */
if ( FT_STREAM_SEEK( idx->data_offset + off1 - 1 ) ||
FT_FRAME_EXTRACT( off2 - off1, *pbytes ) )
goto Exit;
}
}
else
{
/* empty index element */
*pbytes = 0;
*pbyte_len = 0;
}
}
else
error = CFF_Err_Invalid_Argument;
Exit:
return error;
}
FT_LOCAL_DEF( void )
cff_index_forget_element( CFF_Index idx,
FT_Byte** pbytes )
{
if ( idx->bytes == 0 )
{
FT_Stream stream = idx->stream;
FT_FRAME_RELEASE( *pbytes );
}
}
/* get an entry from Name INDEX */
FT_LOCAL_DEF( FT_String* )
cff_index_get_name( CFF_Font font,
FT_UInt element )
{
CFF_Index idx = &font->name_index;
FT_Memory memory = idx->stream->memory;
FT_Byte* bytes;
FT_ULong byte_len;
FT_Error error;
FT_String* name = 0;
error = cff_index_access_element( idx, element, &bytes, &byte_len );
if ( error )
goto Exit;
if ( !FT_ALLOC( name, byte_len + 1 ) )
{
FT_MEM_COPY( name, bytes, byte_len );
name[byte_len] = 0;
}
cff_index_forget_element( idx, &bytes );
Exit:
return name;
}
/* get an entry from String INDEX */
FT_LOCAL_DEF( FT_String* )
cff_index_get_string( CFF_Font font,
FT_UInt element )
{
return ( element < font->num_strings )
? (FT_String*)font->strings[element]
: NULL;
}
FT_LOCAL_DEF( FT_String* )
cff_index_get_sid_string( CFF_Font font,
FT_UInt sid )
{
/* value 0xFFFFU indicates a missing dictionary entry */
if ( sid == 0xFFFFU )
return NULL;
/* if it is not a standard string, return it */
if ( sid > 390 )
return cff_index_get_string( font, sid - 391 );
/* CID-keyed CFF fonts don't have glyph names */
if ( !font->psnames )
return NULL;
/* this is a standard string */
return (FT_String *)font->psnames->adobe_std_strings( sid );
}
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** FD Select table support ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
static void
CFF_Done_FD_Select( CFF_FDSelect fdselect,
FT_Stream stream )
{
if ( fdselect->data )
FT_FRAME_RELEASE( fdselect->data );
fdselect->data_size = 0;
fdselect->format = 0;
fdselect->range_count = 0;
}
static FT_Error
CFF_Load_FD_Select( CFF_FDSelect fdselect,
FT_UInt num_glyphs,
FT_Stream stream,
FT_ULong offset )
{
FT_Error error;
FT_Byte format;
FT_UInt num_ranges;
/* read format */
if ( FT_STREAM_SEEK( offset ) || FT_READ_BYTE( format ) )
goto Exit;
fdselect->format = format;
/* clear cache */
fdselect->cache_count = 0;
switch ( format )
{
/* format 0, that's simple */
case 0:
fdselect->data_size = num_glyphs;
goto Load_Data;
/* format 3, a tad more complex */
case 3:
if ( FT_READ_USHORT( num_ranges ) )
goto Exit;
fdselect->data_size = num_ranges * 3 + 2;
Load_Data:
if ( FT_FRAME_EXTRACT( fdselect->data_size, fdselect->data ) )
goto Exit;
break;
/* hmm... that's wrong */
default:
error = CFF_Err_Invalid_File_Format;
}
Exit:
return error;
}
FT_LOCAL_DEF( FT_Byte )
cff_fd_select_get( CFF_FDSelect fdselect,
FT_UInt glyph_index )
{
FT_Byte fd = 0;
switch ( fdselect->format )
{
case 0:
fd = fdselect->data[glyph_index];
break;
case 3:
/* first, compare to cache */
if ( (FT_UInt)( glyph_index - fdselect->cache_first ) <
fdselect->cache_count )
{
fd = fdselect->cache_fd;
break;
}
/* then, lookup the ranges array */
{
FT_Byte* p = fdselect->data;
FT_Byte* p_limit = p + fdselect->data_size;
FT_Byte fd2;
FT_UInt first, limit;
first = FT_NEXT_USHORT( p );
do
{
if ( glyph_index < first )
break;
fd2 = *p++;
limit = FT_NEXT_USHORT( p );
if ( glyph_index < limit )
{
fd = fd2;
/* update cache */
fdselect->cache_first = first;
fdselect->cache_count = limit-first;
fdselect->cache_fd = fd2;
break;
}
first = limit;
} while ( p < p_limit );
}
break;
default:
;
}
return fd;
}
/*************************************************************************/
/*************************************************************************/
/*** ***/
/*** CFF font support ***/
/*** ***/
/*************************************************************************/
/*************************************************************************/
static FT_Error
cff_charset_compute_cids( CFF_Charset charset,
FT_UInt num_glyphs,
FT_Memory memory )
{
FT_Error error = CFF_Err_Ok;
FT_UInt i;
FT_Long j;
FT_UShort max_cid = 0;
if ( charset->max_cid > 0 )
goto Exit;
for ( i = 0; i < num_glyphs; i++ )
{
if ( charset->sids[i] > max_cid )
max_cid = charset->sids[i];
}
if ( FT_NEW_ARRAY( charset->cids, (FT_ULong)max_cid + 1 ) )
goto Exit;
/* When multiple GIDs map to the same CID, we choose the lowest */
/* GID. This is not described in any spec, but it matches the */
/* behaviour of recent Acroread versions. */
for ( j = num_glyphs - 1; j >= 0 ; j-- )
charset->cids[charset->sids[j]] = (FT_UShort)j;
charset->max_cid = max_cid;
charset->num_glyphs = num_glyphs;
Exit:
return error;
}
FT_LOCAL_DEF( FT_UInt )
cff_charset_cid_to_gindex( CFF_Charset charset,
FT_UInt cid )
{
FT_UInt result = 0;
if ( cid <= charset->max_cid )
result = charset->cids[cid];
return result;
}
static void
cff_charset_free_cids( CFF_Charset charset,
FT_Memory memory )
{
FT_FREE( charset->cids );
charset->max_cid = 0;
}
static void
cff_charset_done( CFF_Charset charset,
FT_Stream stream )
{
FT_Memory memory = stream->memory;
cff_charset_free_cids( charset, memory );
FT_FREE( charset->sids );
charset->format = 0;
charset->offset = 0;
}
static FT_Error
cff_charset_load( CFF_Charset charset,
FT_UInt num_glyphs,
FT_Stream stream,
FT_ULong base_offset,
FT_ULong offset,
FT_Bool invert )
{
FT_Memory memory = stream->memory;
FT_Error error = CFF_Err_Ok;
FT_UShort glyph_sid;
/* If the the offset is greater than 2, we have to parse the */
/* charset table. */
if ( offset > 2 )
{
FT_UInt j;
charset->offset = base_offset + offset;
/* Get the format of the table. */
if ( FT_STREAM_SEEK( charset->offset ) ||
FT_READ_BYTE( charset->format ) )
goto Exit;
/* Allocate memory for sids. */
if ( FT_NEW_ARRAY( charset->sids, num_glyphs ) )
goto Exit;
/* assign the .notdef glyph */
charset->sids[0] = 0;
switch ( charset->format )
{
case 0:
if ( num_glyphs > 0 )
{
if ( FT_FRAME_ENTER( ( num_glyphs - 1 ) * 2 ) )
goto Exit;
for ( j = 1; j < num_glyphs; j++ )
charset->sids[j] = FT_GET_USHORT();
FT_FRAME_EXIT();
}
break;
case 1:
case 2:
{
FT_UInt nleft;
FT_UInt i;
j = 1;
while ( j < num_glyphs )
{
/* Read the first glyph sid of the range. */
if ( FT_READ_USHORT( glyph_sid ) )
goto Exit;
/* Read the number of glyphs in the range. */
if ( charset->format == 2 )
{
if ( FT_READ_USHORT( nleft ) )
goto Exit;
}
else
{
if ( FT_READ_BYTE( nleft ) )
goto Exit;
}
/* try to rescue some of the SIDs if `nleft' is too large */
if ( glyph_sid > 0xFFFFL - nleft )
{
FT_ERROR(( "cff_charset_load: invalid SID range trimmed"
" nleft=%d -> %d\n", nleft, 0xFFFFL - glyph_sid ));
nleft = ( FT_UInt )( 0xFFFFL - glyph_sid );
}
/* Fill in the range of sids -- `nleft + 1' glyphs. */
for ( i = 0; j < num_glyphs && i <= nleft; i++, j++, glyph_sid++ )
charset->sids[j] = glyph_sid;
}
}
break;
default:
FT_ERROR(( "cff_charset_load: invalid table format\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
}
else
{
/* Parse default tables corresponding to offset == 0, 1, or 2. */
/* CFF specification intimates the following: */
/* */
/* In order to use a predefined charset, the following must be */
/* true: The charset constructed for the glyphs in the font's */
/* charstrings dictionary must match the predefined charset in */
/* the first num_glyphs. */
/* record charset type */
charset->offset = offset;
switch ( (FT_UInt)offset )
{
case 0:
if ( num_glyphs > 229 )
{
FT_ERROR(( "cff_charset_load: implicit charset larger than\n"
"predefined charset (Adobe ISO-Latin)\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
/* Allocate memory for sids. */
if ( FT_NEW_ARRAY( charset->sids, num_glyphs ) )
goto Exit;
/* Copy the predefined charset into the allocated memory. */
FT_ARRAY_COPY( charset->sids, cff_isoadobe_charset, num_glyphs );
break;
case 1:
if ( num_glyphs > 166 )
{
FT_ERROR(( "cff_charset_load: implicit charset larger than\n"
"predefined charset (Adobe Expert)\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
/* Allocate memory for sids. */
if ( FT_NEW_ARRAY( charset->sids, num_glyphs ) )
goto Exit;
/* Copy the predefined charset into the allocated memory. */
FT_ARRAY_COPY( charset->sids, cff_expert_charset, num_glyphs );
break;
case 2:
if ( num_glyphs > 87 )
{
FT_ERROR(( "cff_charset_load: implicit charset larger than\n"
"predefined charset (Adobe Expert Subset)\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
/* Allocate memory for sids. */
if ( FT_NEW_ARRAY( charset->sids, num_glyphs ) )
goto Exit;
/* Copy the predefined charset into the allocated memory. */
FT_ARRAY_COPY( charset->sids, cff_expertsubset_charset, num_glyphs );
break;
default:
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
}
/* we have to invert the `sids' array for subsetted CID-keyed fonts */
if ( invert )
error = cff_charset_compute_cids( charset, num_glyphs, memory );
Exit:
/* Clean up if there was an error. */
if ( error )
{
FT_FREE( charset->sids );
FT_FREE( charset->cids );
charset->format = 0;
charset->offset = 0;
charset->sids = 0;
}
return error;
}
static void
cff_encoding_done( CFF_Encoding encoding )
{
encoding->format = 0;
encoding->offset = 0;
encoding->count = 0;
}
static FT_Error
cff_encoding_load( CFF_Encoding encoding,
CFF_Charset charset,
FT_UInt num_glyphs,
FT_Stream stream,
FT_ULong base_offset,
FT_ULong offset )
{
FT_Error error = CFF_Err_Ok;
FT_UInt count;
FT_UInt j;
FT_UShort glyph_sid;
FT_UInt glyph_code;
/* Check for charset->sids. If we do not have this, we fail. */
if ( !charset->sids )
{
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
/* Zero out the code to gid/sid mappings. */
for ( j = 0; j < 256; j++ )
{
encoding->sids [j] = 0;
encoding->codes[j] = 0;
}
/* Note: The encoding table in a CFF font is indexed by glyph index; */
/* the first encoded glyph index is 1. Hence, we read the character */
/* code (`glyph_code') at index j and make the assignment: */
/* */
/* encoding->codes[glyph_code] = j + 1 */
/* */
/* We also make the assignment: */
/* */
/* encoding->sids[glyph_code] = charset->sids[j + 1] */
/* */
/* This gives us both a code to GID and a code to SID mapping. */
if ( offset > 1 )
{
encoding->offset = base_offset + offset;
/* we need to parse the table to determine its size */
if ( FT_STREAM_SEEK( encoding->offset ) ||
FT_READ_BYTE( encoding->format ) ||
FT_READ_BYTE( count ) )
goto Exit;
switch ( encoding->format & 0x7F )
{
case 0:
{
FT_Byte* p;
/* By convention, GID 0 is always ".notdef" and is never */
/* coded in the font. Hence, the number of codes found */
/* in the table is `count+1'. */
/* */
encoding->count = count + 1;
if ( FT_FRAME_ENTER( count ) )
goto Exit;
p = (FT_Byte*)stream->cursor;
for ( j = 1; j <= count; j++ )
{
glyph_code = *p++;
/* Make sure j is not too big. */
if ( j < num_glyphs )
{
/* Assign code to GID mapping. */
encoding->codes[glyph_code] = (FT_UShort)j;
/* Assign code to SID mapping. */
encoding->sids[glyph_code] = charset->sids[j];
}
}
FT_FRAME_EXIT();
}
break;
case 1:
{
FT_UInt nleft;
FT_UInt i = 1;
FT_UInt k;
encoding->count = 0;
/* Parse the Format1 ranges. */
for ( j = 0; j < count; j++, i += nleft )
{
/* Read the first glyph code of the range. */
if ( FT_READ_BYTE( glyph_code ) )
goto Exit;
/* Read the number of codes in the range. */
if ( FT_READ_BYTE( nleft ) )
goto Exit;
/* Increment nleft, so we read `nleft + 1' codes/sids. */
nleft++;
/* compute max number of character codes */
if ( (FT_UInt)nleft > encoding->count )
encoding->count = nleft;
/* Fill in the range of codes/sids. */
for ( k = i; k < nleft + i; k++, glyph_code++ )
{
/* Make sure k is not too big. */
if ( k < num_glyphs && glyph_code < 256 )
{
/* Assign code to GID mapping. */
encoding->codes[glyph_code] = (FT_UShort)k;
/* Assign code to SID mapping. */
encoding->sids[glyph_code] = charset->sids[k];
}
}
}
/* simple check; one never knows what can be found in a font */
if ( encoding->count > 256 )
encoding->count = 256;
}
break;
default:
FT_ERROR(( "cff_encoding_load: invalid table format\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
/* Parse supplemental encodings, if any. */
if ( encoding->format & 0x80 )
{
FT_UInt gindex;
/* count supplements */
if ( FT_READ_BYTE( count ) )
goto Exit;
for ( j = 0; j < count; j++ )
{
/* Read supplemental glyph code. */
if ( FT_READ_BYTE( glyph_code ) )
goto Exit;
/* Read the SID associated with this glyph code. */
if ( FT_READ_USHORT( glyph_sid ) )
goto Exit;
/* Assign code to SID mapping. */
encoding->sids[glyph_code] = glyph_sid;
/* First, look up GID which has been assigned to */
/* SID glyph_sid. */
for ( gindex = 0; gindex < num_glyphs; gindex++ )
{
if ( charset->sids[gindex] == glyph_sid )
{
encoding->codes[glyph_code] = (FT_UShort)gindex;
break;
}
}
}
}
}
else
{
/* We take into account the fact a CFF font can use a predefined */
/* encoding without containing all of the glyphs encoded by this */
/* encoding (see the note at the end of section 12 in the CFF */
/* specification). */
switch ( (FT_UInt)offset )
{
case 0:
/* First, copy the code to SID mapping. */
FT_ARRAY_COPY( encoding->sids, cff_standard_encoding, 256 );
goto Populate;
case 1:
/* First, copy the code to SID mapping. */
FT_ARRAY_COPY( encoding->sids, cff_expert_encoding, 256 );
Populate:
/* Construct code to GID mapping from code to SID mapping */
/* and charset. */
encoding->count = 0;
error = cff_charset_compute_cids( charset, num_glyphs,
stream->memory );
if ( error )
goto Exit;
for ( j = 0; j < 256; j++ )
{
FT_UInt sid = encoding->sids[j];
FT_UInt gid = 0;
if ( sid )
gid = cff_charset_cid_to_gindex( charset, sid );
if ( gid != 0 )
{
encoding->codes[j] = (FT_UShort)gid;
encoding->count = j + 1;
}
else
{
encoding->codes[j] = 0;
encoding->sids [j] = 0;
}
}
break;
default:
FT_ERROR(( "cff_encoding_load: invalid table format\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
}
Exit:
/* Clean up if there was an error. */
return error;
}
static FT_Error
cff_subfont_load( CFF_SubFont font,
CFF_Index idx,
FT_UInt font_index,
FT_Stream stream,
FT_ULong base_offset,
FT_Library library )
{
FT_Error error;
CFF_ParserRec parser;
FT_Byte* dict = NULL;
FT_ULong dict_len;
CFF_FontRecDict top = &font->font_dict;
CFF_Private priv = &font->private_dict;
cff_parser_init( &parser, CFF_CODE_TOPDICT, &font->font_dict, library );
/* set defaults */
FT_MEM_ZERO( top, sizeof ( *top ) );
top->underline_position = -100L << 16;
top->underline_thickness = 50L << 16;
top->charstring_type = 2;
top->font_matrix.xx = 0x10000L;
top->font_matrix.yy = 0x10000L;
top->cid_count = 8720;
/* we use the implementation specific SID value 0xFFFF to indicate */
/* missing entries */
top->version = 0xFFFFU;
top->notice = 0xFFFFU;
top->copyright = 0xFFFFU;
top->full_name = 0xFFFFU;
top->family_name = 0xFFFFU;
top->weight = 0xFFFFU;
top->embedded_postscript = 0xFFFFU;
top->cid_registry = 0xFFFFU;
top->cid_ordering = 0xFFFFU;
top->cid_font_name = 0xFFFFU;
error = cff_index_access_element( idx, font_index, &dict, &dict_len );
if ( !error )
{
FT_TRACE4(( " top dictionary:\n" ));
error = cff_parser_run( &parser, dict, dict + dict_len );
}
cff_index_forget_element( idx, &dict );
if ( error )
goto Exit;
/* if it is a CID font, we stop there */
if ( top->cid_registry != 0xFFFFU )
goto Exit;
/* parse the private dictionary, if any */
if ( top->private_offset && top->private_size )
{
/* set defaults */
FT_MEM_ZERO( priv, sizeof ( *priv ) );
priv->blue_shift = 7;
priv->blue_fuzz = 1;
priv->lenIV = -1;
priv->expansion_factor = (FT_Fixed)( 0.06 * 0x10000L );
priv->blue_scale = (FT_Fixed)( 0.039625 * 0x10000L * 1000 );
cff_parser_init( &parser, CFF_CODE_PRIVATE, priv, library );
if ( FT_STREAM_SEEK( base_offset + font->font_dict.private_offset ) ||
FT_FRAME_ENTER( font->font_dict.private_size ) )
goto Exit;
FT_TRACE4(( " private dictionary:\n" ));
error = cff_parser_run( &parser,
(FT_Byte*)stream->cursor,
(FT_Byte*)stream->limit );
FT_FRAME_EXIT();
if ( error )
goto Exit;
/* ensure that `num_blue_values' is even */
priv->num_blue_values &= ~1;
}
/* read the local subrs, if any */
if ( priv->local_subrs_offset )
{
if ( FT_STREAM_SEEK( base_offset + top->private_offset +
priv->local_subrs_offset ) )
goto Exit;
error = cff_index_init( &font->local_subrs_index, stream, 1 );
if ( error )
goto Exit;
error = cff_index_get_pointers( &font->local_subrs_index,
&font->local_subrs, NULL );
if ( error )
goto Exit;
}
Exit:
return error;
}
static void
cff_subfont_done( FT_Memory memory,
CFF_SubFont subfont )
{
if ( subfont )
{
cff_index_done( &subfont->local_subrs_index );
FT_FREE( subfont->local_subrs );
}
}
FT_LOCAL_DEF( FT_Error )
cff_font_load( FT_Library library,
FT_Stream stream,
FT_Int face_index,
CFF_Font font,
FT_Bool pure_cff )
{
static const FT_Frame_Field cff_header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE CFF_FontRec
FT_FRAME_START( 4 ),
FT_FRAME_BYTE( version_major ),
FT_FRAME_BYTE( version_minor ),
FT_FRAME_BYTE( header_size ),
FT_FRAME_BYTE( absolute_offsize ),
FT_FRAME_END
};
FT_Error error;
FT_Memory memory = stream->memory;
FT_ULong base_offset;
CFF_FontRecDict dict;
CFF_IndexRec string_index;
FT_Int subfont_index;
FT_ZERO( font );
FT_ZERO( &string_index );
font->stream = stream;
font->memory = memory;
dict = &font->top_font.font_dict;
base_offset = FT_STREAM_POS();
/* read CFF font header */
if ( FT_STREAM_READ_FIELDS( cff_header_fields, font ) )
goto Exit;
/* check format */
if ( font->version_major != 1 ||
font->header_size < 4 ||
font->absolute_offsize > 4 )
{
FT_TRACE2(( " not a CFF font header\n" ));
error = CFF_Err_Unknown_File_Format;
goto Exit;
}
/* skip the rest of the header */
if ( FT_STREAM_SKIP( font->header_size - 4 ) )
goto Exit;
/* read the name, top dict, string and global subrs index */
if ( FT_SET_ERROR( cff_index_init( &font->name_index,
stream, 0 ) ) ||
FT_SET_ERROR( cff_index_init( &font->font_dict_index,
stream, 0 ) ) ||
FT_SET_ERROR( cff_index_init( &string_index,
stream, 1 ) ) ||
FT_SET_ERROR( cff_index_init( &font->global_subrs_index,
stream, 1 ) ) ||
FT_SET_ERROR( cff_index_get_pointers( &string_index,
&font->strings,
&font->string_pool ) ) )
goto Exit;
font->num_strings = string_index.count;
if ( pure_cff )
{
/* well, we don't really forget the `disabled' fonts... */
subfont_index = face_index;
if ( subfont_index >= (FT_Int)font->name_index.count )
{
FT_ERROR(( "cff_font_load:"
" invalid subfont index for pure CFF font (%d)\n",
subfont_index ));
error = CFF_Err_Invalid_Argument;
goto Exit;
}
font->num_faces = font->name_index.count;
}
else
{
subfont_index = 0;
if ( font->name_index.count > 1 )
{
FT_ERROR(( "cff_font_load:"
" invalid CFF font with multiple subfonts\n"
" "
" in SFNT wrapper\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
}
/* in case of a font format check, simply exit now */
if ( face_index < 0 )
goto Exit;
/* now, parse the top-level font dictionary */
FT_TRACE4(( "parsing top-level\n" ));
error = cff_subfont_load( &font->top_font,
&font->font_dict_index,
subfont_index,
stream,
base_offset,
library );
if ( error )
goto Exit;
if ( FT_STREAM_SEEK( base_offset + dict->charstrings_offset ) )
goto Exit;
error = cff_index_init( &font->charstrings_index, stream, 0 );
if ( error )
goto Exit;
/* now, check for a CID font */
if ( dict->cid_registry != 0xFFFFU )
{
CFF_IndexRec fd_index;
CFF_SubFont sub = NULL;
FT_UInt idx;
/* this is a CID-keyed font, we must now allocate a table of */
/* sub-fonts, then load each of them separately */
if ( FT_STREAM_SEEK( base_offset + dict->cid_fd_array_offset ) )
goto Exit;
error = cff_index_init( &fd_index, stream, 0 );
if ( error )
goto Exit;
if ( fd_index.count > CFF_MAX_CID_FONTS )
{
FT_TRACE0(( "cff_font_load: FD array too large in CID font\n" ));
goto Fail_CID;
}
/* allocate & read each font dict independently */
font->num_subfonts = fd_index.count;
if ( FT_NEW_ARRAY( sub, fd_index.count ) )
goto Fail_CID;
/* set up pointer table */
for ( idx = 0; idx < fd_index.count; idx++ )
font->subfonts[idx] = sub + idx;
/* now load each subfont independently */
for ( idx = 0; idx < fd_index.count; idx++ )
{
sub = font->subfonts[idx];
FT_TRACE4(( "parsing subfont %u\n", idx ));
error = cff_subfont_load( sub, &fd_index, idx,
stream, base_offset, library );
if ( error )
goto Fail_CID;
}
/* now load the FD Select array */
error = CFF_Load_FD_Select( &font->fd_select,
font->charstrings_index.count,
stream,
base_offset + dict->cid_fd_select_offset );
Fail_CID:
cff_index_done( &fd_index );
if ( error )
goto Exit;
}
else
font->num_subfonts = 0;
/* read the charstrings index now */
if ( dict->charstrings_offset == 0 )
{
FT_ERROR(( "cff_font_load: no charstrings offset\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
font->num_glyphs = font->charstrings_index.count;
error = cff_index_get_pointers( &font->global_subrs_index,
&font->global_subrs, NULL );
if ( error )
goto Exit;
/* read the Charset and Encoding tables if available */
if ( font->num_glyphs > 0 )
{
FT_Bool invert = FT_BOOL( dict->cid_registry != 0xFFFFU && pure_cff );
error = cff_charset_load( &font->charset, font->num_glyphs, stream,
base_offset, dict->charset_offset, invert );
if ( error )
goto Exit;
/* CID-keyed CFFs don't have an encoding */
if ( dict->cid_registry == 0xFFFFU )
{
error = cff_encoding_load( &font->encoding,
&font->charset,
font->num_glyphs,
stream,
base_offset,
dict->encoding_offset );
if ( error )
goto Exit;
}
}
/* get the font name (/CIDFontName for CID-keyed fonts, */
/* /FontName otherwise) */
font->font_name = cff_index_get_name( font, subfont_index );
Exit:
cff_index_done( &string_index );
return error;
}
FT_LOCAL_DEF( void )
cff_font_done( CFF_Font font )
{
FT_Memory memory = font->memory;
FT_UInt idx;
cff_index_done( &font->global_subrs_index );
cff_index_done( &font->font_dict_index );
cff_index_done( &font->name_index );
cff_index_done( &font->charstrings_index );
/* release font dictionaries, but only if working with */
/* a CID keyed CFF font */
if ( font->num_subfonts > 0 )
{
for ( idx = 0; idx < font->num_subfonts; idx++ )
cff_subfont_done( memory, font->subfonts[idx] );
/* the subfonts array has been allocated as a single block */
FT_FREE( font->subfonts[0] );
}
cff_encoding_done( &font->encoding );
cff_charset_done( &font->charset, font->stream );
cff_subfont_done( memory, &font->top_font );
CFF_Done_FD_Select( &font->fd_select, font->stream );
FT_FREE( font->font_info );
FT_FREE( font->font_name );
FT_FREE( font->global_subrs );
FT_FREE( font->strings );
FT_FREE( font->string_pool );
}
/* END */
/***************************************************************************/
/* */
/* cffobjs.c */
/* */
/* OpenType objects manager (body). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cffobjs
/*************************************************************************/
/* */
/* SIZE FUNCTIONS */
/* */
/* Note that we store the global hints in the size's `internal' root */
/* field. */
/* */
/*************************************************************************/
static PSH_Globals_Funcs
cff_size_get_globals_funcs( CFF_Size size )
{
CFF_Face face = (CFF_Face)size->root.face;
CFF_Font font = (CFF_Font)face->extra.data;
PSHinter_Service pshinter = font->pshinter;
FT_Module module;
module = FT_Get_Module( size->root.face->driver->root.library,
"pshinter" );
return ( module && pshinter && pshinter->get_globals_funcs )
? pshinter->get_globals_funcs( module )
: 0;
}
FT_LOCAL_DEF( void )
/* CFF_Size */
cff_size_done( FT_Size cffsize )
{
CFF_Size size = (CFF_Size)cffsize;
CFF_Face face = (CFF_Face)size->root.face;
CFF_Font font = (CFF_Font)face->extra.data;
CFF_Internal internal = (CFF_Internal)cffsize->internal;
if ( internal )
{
PSH_Globals_Funcs funcs;
funcs = cff_size_get_globals_funcs( size );
if ( funcs )
{
FT_UInt i;
funcs->destroy( internal->topfont );
for ( i = font->num_subfonts; i > 0; i-- )
funcs->destroy( internal->subfonts[i - 1] );
}
/* `internal' is freed by destroy_size (in ftobjs.c) */
}
}
/* CFF and Type 1 private dictionaries have slightly different */
/* structures; we need to synthesize a Type 1 dictionary on the fly */
static void
cff_make_private_dict( CFF_SubFont subfont,
PS_Private priv )
{
CFF_Private cpriv = &subfont->private_dict;
FT_UInt n, count;
FT_MEM_ZERO( priv, sizeof ( *priv ) );
count = priv->num_blue_values = cpriv->num_blue_values;
for ( n = 0; n < count; n++ )
priv->blue_values[n] = (FT_Short)cpriv->blue_values[n];
count = priv->num_other_blues = cpriv->num_other_blues;
for ( n = 0; n < count; n++ )
priv->other_blues[n] = (FT_Short)cpriv->other_blues[n];
count = priv->num_family_blues = cpriv->num_family_blues;
for ( n = 0; n < count; n++ )
priv->family_blues[n] = (FT_Short)cpriv->family_blues[n];
count = priv->num_family_other_blues = cpriv->num_family_other_blues;
for ( n = 0; n < count; n++ )
priv->family_other_blues[n] = (FT_Short)cpriv->family_other_blues[n];
priv->blue_scale = cpriv->blue_scale;
priv->blue_shift = (FT_Int)cpriv->blue_shift;
priv->blue_fuzz = (FT_Int)cpriv->blue_fuzz;
priv->standard_width[0] = (FT_UShort)cpriv->standard_width;
priv->standard_height[0] = (FT_UShort)cpriv->standard_height;
count = priv->num_snap_widths = cpriv->num_snap_widths;
for ( n = 0; n < count; n++ )
priv->snap_widths[n] = (FT_Short)cpriv->snap_widths[n];
count = priv->num_snap_heights = cpriv->num_snap_heights;
for ( n = 0; n < count; n++ )
priv->snap_heights[n] = (FT_Short)cpriv->snap_heights[n];
priv->force_bold = cpriv->force_bold;
priv->language_group = cpriv->language_group;
priv->lenIV = cpriv->lenIV;
}
FT_LOCAL_DEF( FT_Error )
/* CFF_Size */
cff_size_init( FT_Size cffsize )
{
CFF_Size size = (CFF_Size)cffsize;
FT_Error error = CFF_Err_Ok;
PSH_Globals_Funcs funcs = cff_size_get_globals_funcs( size );
if ( funcs )
{
CFF_Face face = (CFF_Face)cffsize->face;
CFF_Font font = (CFF_Font)face->extra.data;
CFF_Internal internal = NULL;
PS_PrivateRec priv;
FT_Memory memory = cffsize->face->memory;
FT_UInt i;
if ( FT_NEW( internal ) )
goto Exit;
cff_make_private_dict( &font->top_font, &priv );
error = funcs->create( cffsize->face->memory, &priv,
&internal->topfont );
if ( error )
goto Exit;
for ( i = font->num_subfonts; i > 0; i-- )
{
CFF_SubFont sub = font->subfonts[i - 1];
cff_make_private_dict( sub, &priv );
error = funcs->create( cffsize->face->memory, &priv,
&internal->subfonts[i - 1] );
if ( error )
goto Exit;
}
cffsize->internal = (FT_Size_Internal)(void*)internal;
}
size->strike_index = 0xFFFFFFFFUL;
Exit:
return error;
}
FT_LOCAL_DEF( FT_Error )
cff_size_select( FT_Size size,
FT_ULong strike_index )
{
CFF_Size cffsize = (CFF_Size)size;
PSH_Globals_Funcs funcs;
cffsize->strike_index = strike_index;
FT_Select_Metrics( size->face, strike_index );
funcs = cff_size_get_globals_funcs( cffsize );
if ( funcs )
{
CFF_Face face = (CFF_Face)size->face;
CFF_Font font = (CFF_Font)face->extra.data;
CFF_Internal internal = (CFF_Internal)size->internal;
FT_ULong top_upm = font->top_font.font_dict.units_per_em;
FT_UInt i;
funcs->set_scale( internal->topfont,
size->metrics.x_scale, size->metrics.y_scale,
0, 0 );
for ( i = font->num_subfonts; i > 0; i-- )
{
CFF_SubFont sub = font->subfonts[i - 1];
FT_ULong sub_upm = sub->font_dict.units_per_em;
FT_Pos x_scale, y_scale;
if ( top_upm != sub_upm )
{
x_scale = FT_MulDiv( size->metrics.x_scale, top_upm, sub_upm );
y_scale = FT_MulDiv( size->metrics.y_scale, top_upm, sub_upm );
}
else
{
x_scale = size->metrics.x_scale;
y_scale = size->metrics.y_scale;
}
funcs->set_scale( internal->subfonts[i - 1],
x_scale, y_scale, 0, 0 );
}
}
return CFF_Err_Ok;
}
FT_LOCAL_DEF( FT_Error )
cff_size_request( FT_Size size,
FT_Size_Request req )
{
CFF_Size cffsize = (CFF_Size)size;
PSH_Globals_Funcs funcs;
if ( FT_HAS_FIXED_SIZES( size->face ) )
{
CFF_Face cffface = (CFF_Face)size->face;
SFNT_Service sfnt = (SFNT_Service)cffface->sfnt;
FT_ULong strike_index;
if ( sfnt->set_sbit_strike( cffface, req, &strike_index ) )
cffsize->strike_index = 0xFFFFFFFFUL;
else
return cff_size_select( size, strike_index );
}
FT_Request_Metrics( size->face, req );
funcs = cff_size_get_globals_funcs( cffsize );
if ( funcs )
{
CFF_Face cffface = (CFF_Face)size->face;
CFF_Font font = (CFF_Font)cffface->extra.data;
CFF_Internal internal = (CFF_Internal)size->internal;
FT_ULong top_upm = font->top_font.font_dict.units_per_em;
FT_UInt i;
funcs->set_scale( internal->topfont,
size->metrics.x_scale, size->metrics.y_scale,
0, 0 );
for ( i = font->num_subfonts; i > 0; i-- )
{
CFF_SubFont sub = font->subfonts[i - 1];
FT_ULong sub_upm = sub->font_dict.units_per_em;
FT_Pos x_scale, y_scale;
if ( top_upm != sub_upm )
{
x_scale = FT_MulDiv( size->metrics.x_scale, top_upm, sub_upm );
y_scale = FT_MulDiv( size->metrics.y_scale, top_upm, sub_upm );
}
else
{
x_scale = size->metrics.x_scale;
y_scale = size->metrics.y_scale;
}
funcs->set_scale( internal->subfonts[i - 1],
x_scale, y_scale, 0, 0 );
}
}
return CFF_Err_Ok;
}
/*************************************************************************/
/* */
/* SLOT FUNCTIONS */
/* */
/*************************************************************************/
FT_LOCAL_DEF( void )
cff_slot_done( FT_GlyphSlot slot )
{
slot->internal->glyph_hints = 0;
}
FT_LOCAL_DEF( FT_Error )
cff_slot_init( FT_GlyphSlot slot )
{
CFF_Face face = (CFF_Face)slot->face;
CFF_Font font = (CFF_Font)face->extra.data;
PSHinter_Service pshinter = font->pshinter;
if ( pshinter )
{
FT_Module module;
module = FT_Get_Module( slot->face->driver->root.library,
"pshinter" );
if ( module )
{
T2_Hints_Funcs funcs;
funcs = pshinter->get_t2_funcs( module );
slot->internal->glyph_hints = (void*)funcs;
}
}
return CFF_Err_Ok;
}
/*************************************************************************/
/* */
/* FACE FUNCTIONS */
/* */
/*************************************************************************/
static FT_String*
cff_strcpy( FT_Memory memory,
const FT_String* source )
{
FT_Error error;
FT_String* result;
(void)FT_STRDUP( result, source );
FT_UNUSED( error );
return result;
}
/* Strip all subset prefixes of the form `ABCDEF+'. Usually, there */
/* is only one, but font names like `APCOOG+JFABTD+FuturaBQ-Bold' */
/* have been seen in the wild. */
static void
remove_subset_prefix( FT_String* name )
{
FT_Int32 idx = 0;
FT_Int32 length = strlen( name ) + 1;
FT_Bool continue_search = 1;
while ( continue_search )
{
if ( length >= 7 && name[6] == '+' )
{
for ( idx = 0; idx < 6; idx++ )
{
/* ASCII uppercase letters */
if ( !( 'A' <= name[idx] && name[idx] <= 'Z' ) )
continue_search = 0;
}
if ( continue_search )
{
for ( idx = 7; idx < length; idx++ )
name[idx - 7] = name[idx];
length -= 7;
}
}
else
continue_search = 0;
}
}
/* Remove the style part from the family name (if present). */
static void
remove_style( FT_String* family_name,
const FT_String* style_name )
{
FT_Int32 family_name_length, style_name_length;
family_name_length = strlen( family_name );
style_name_length = strlen( style_name );
if ( family_name_length > style_name_length )
{
FT_Int idx;
for ( idx = 1; idx <= style_name_length; ++idx )
{
if ( family_name[family_name_length - idx] !=
style_name[style_name_length - idx] )
break;
}
if ( idx > style_name_length )
{
/* family_name ends with style_name; remove it */
idx = family_name_length - style_name_length - 1;
/* also remove special characters */
/* between real family name and style */
while ( idx > 0 &&
( family_name[idx] == '-' ||
family_name[idx] == ' ' ||
family_name[idx] == '_' ||
family_name[idx] == '+' ) )
--idx;
if ( idx > 0 )
family_name[idx + 1] = '\0';
}
}
}
FT_LOCAL_DEF( FT_Error )
cff_face_init( FT_Stream stream,
/* CFF_Face */
FT_Face cffface,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
CFF_Face face = (CFF_Face)cffface;
FT_Error error;
SFNT_Service sfnt;
FT_Service_PsCMaps psnames;
PSHinter_Service pshinter;
FT_Bool pure_cff = 1;
FT_Bool sfnt_format = 0;
FT_Library library = cffface->driver->root.library;
sfnt = (SFNT_Service)FT_Get_Module_Interface(
library, "sfnt" );
if ( !sfnt )
{
FT_ERROR(( "cff_face_init: cannot access `sfnt' module\n" ));
error = CFF_Err_Missing_Module;
goto Exit;
}
FT_FACE_FIND_GLOBAL_SERVICE( face, psnames, POSTSCRIPT_CMAPS );
pshinter = (PSHinter_Service)FT_Get_Module_Interface(
library, "pshinter" );
FT_TRACE2(( "CFF driver\n" ));
/* create input stream from resource */
if ( FT_STREAM_SEEK( 0 ) )
goto Exit;
/* check whether we have a valid OpenType file */
error = sfnt->init_face( stream, face, face_index, num_params, params );
if ( !error )
{
/* `OTTO'; OpenType/CFF font */
if ( face->format_tag != TTAG_OTTO )
{
FT_TRACE2(( " not an OpenType/CFF font\n" ));
error = CFF_Err_Unknown_File_Format;
goto Exit;
}
/* if we are performing a simple font format check, exit immediately */
if ( face_index < 0 )
return CFF_Err_Ok;
sfnt_format = 1;
/* now, the font can be either an OpenType/CFF font, or an SVG CEF */
/* font; in the latter case it doesn't have a `head' table */
error = face->goto_table( face, TTAG_head, stream, 0 );
if ( !error )
{
pure_cff = 0;
/* load font directory */
error = sfnt->load_face( stream, face, face_index,
num_params, params );
if ( error )
goto Exit;
}
else
{
/* load the `cmap' table explicitly */
error = sfnt->load_cmap( face, stream );
if ( error )
goto Exit;
}
/* now load the CFF part of the file */
error = face->goto_table( face, TTAG_CFF, stream, 0 );
if ( error )
goto Exit;
}
else
{
/* rewind to start of file; we are going to load a pure-CFF font */
if ( FT_STREAM_SEEK( 0 ) )
goto Exit;
error = CFF_Err_Ok;
}
/* now load and parse the CFF table in the file */
{
CFF_Font cff = NULL;
CFF_FontRecDict dict;
FT_Memory memory = cffface->memory;
FT_Int32 flags;
FT_UInt i;
if ( FT_NEW( cff ) )
goto Exit;
face->extra.data = cff;
error = cff_font_load( library, stream, face_index, cff, pure_cff );
if ( error )
goto Exit;
cff->pshinter = pshinter;
cff->psnames = psnames;
cffface->face_index = face_index;
/* Complement the root flags with some interesting information. */
/* Note that this is only necessary for pure CFF and CEF fonts; */
/* SFNT based fonts use the `name' table instead. */
cffface->num_glyphs = cff->num_glyphs;
dict = &cff->top_font.font_dict;
/* we need the `PSNames' module for CFF and CEF formats */
/* which aren't CID-keyed */
if ( dict->cid_registry == 0xFFFFU && !psnames )
{
FT_ERROR(( "cff_face_init:"
" cannot open CFF & CEF fonts\n"
" "
" without the `PSNames' module\n" ));
error = CFF_Err_Missing_Module;
goto Exit;
}
if ( !dict->has_font_matrix )
dict->units_per_em = pure_cff ? 1000 : face->root.units_per_EM;
/* Normalize the font matrix so that `matrix->xx' is 1; the */
/* scaling is done with `units_per_em' then (at this point, */
/* it already contains the scaling factor, but without */
/* normalization of the matrix). */
/* */
/* Note that the offsets must be expressed in integer font */
/* units. */
{
FT_Matrix* matrix = &dict->font_matrix;
FT_Vector* offset = &dict->font_offset;
FT_ULong* upm = &dict->units_per_em;
FT_Fixed temp = FT_ABS( matrix->yy );
if ( temp != 0x10000L )
{
*upm = FT_DivFix( *upm, temp );
matrix->xx = FT_DivFix( matrix->xx, temp );
matrix->yx = FT_DivFix( matrix->yx, temp );
matrix->xy = FT_DivFix( matrix->xy, temp );
matrix->yy = FT_DivFix( matrix->yy, temp );
offset->x = FT_DivFix( offset->x, temp );
offset->y = FT_DivFix( offset->y, temp );
}
offset->x >>= 16;
offset->y >>= 16;
}
for ( i = cff->num_subfonts; i > 0; i-- )
{
CFF_FontRecDict sub = &cff->subfonts[i - 1]->font_dict;
CFF_FontRecDict top = &cff->top_font.font_dict;
FT_Matrix* matrix;
FT_Vector* offset;
FT_ULong* upm;
FT_Fixed temp;
if ( sub->has_font_matrix )
{
FT_Long scaling;
/* if we have a top-level matrix, */
/* concatenate the subfont matrix */
if ( top->has_font_matrix )
{
if ( top->units_per_em > 1 && sub->units_per_em > 1 )
scaling = FT_MIN( top->units_per_em, sub->units_per_em );
else
scaling = 1;
FT_Matrix_Multiply_Scaled( &top->font_matrix,
&sub->font_matrix,
scaling );
FT_Vector_Transform_Scaled( &sub->font_offset,
&top->font_matrix,
scaling );
sub->units_per_em = FT_MulDiv( sub->units_per_em,
top->units_per_em,
scaling );
}
}
else
{
sub->font_matrix = top->font_matrix;
sub->font_offset = top->font_offset;
sub->units_per_em = top->units_per_em;
}
matrix = &sub->font_matrix;
offset = &sub->font_offset;
upm = &sub->units_per_em;
temp = FT_ABS( matrix->yy );
if ( temp != 0x10000L )
{
*upm = FT_DivFix( *upm, temp );
matrix->xx = FT_DivFix( matrix->xx, temp );
matrix->yx = FT_DivFix( matrix->yx, temp );
matrix->xy = FT_DivFix( matrix->xy, temp );
matrix->yy = FT_DivFix( matrix->yy, temp );
offset->x = FT_DivFix( offset->x, temp );
offset->y = FT_DivFix( offset->y, temp );
}
offset->x >>= 16;
offset->y >>= 16;
}
if ( pure_cff )
{
char* style_name = NULL;
/* set up num_faces */
cffface->num_faces = cff->num_faces;
/* compute number of glyphs */
if ( dict->cid_registry != 0xFFFFU )
cffface->num_glyphs = cff->charset.max_cid + 1;
else
cffface->num_glyphs = cff->charstrings_index.count;
/* set global bbox, as well as EM size */
cffface->bbox.xMin = dict->font_bbox.xMin >> 16;
cffface->bbox.yMin = dict->font_bbox.yMin >> 16;
/* no `U' suffix here to 0xFFFF! */
cffface->bbox.xMax = ( dict->font_bbox.xMax + 0xFFFF ) >> 16;
cffface->bbox.yMax = ( dict->font_bbox.yMax + 0xFFFF ) >> 16;
cffface->units_per_EM = (FT_UShort)( dict->units_per_em );
cffface->ascender = (FT_Short)( cffface->bbox.yMax );
cffface->descender = (FT_Short)( cffface->bbox.yMin );
cffface->height = (FT_Short)( ( cffface->units_per_EM * 12 ) / 10 );
if ( cffface->height < cffface->ascender - cffface->descender )
cffface->height = (FT_Short)( cffface->ascender - cffface->descender );
cffface->underline_position =
(FT_Short)( dict->underline_position >> 16 );
cffface->underline_thickness =
(FT_Short)( dict->underline_thickness >> 16 );
/* retrieve font family & style name */
cffface->family_name = cff_index_get_name( cff, face_index );
if ( cffface->family_name )
{
char* full = cff_index_get_sid_string( cff,
dict->full_name );
char* fullp = full;
char* family = cffface->family_name;
char* family_name = NULL;
remove_subset_prefix( cffface->family_name );
if ( dict->family_name )
{
family_name = cff_index_get_sid_string( cff,
dict->family_name );
if ( family_name )
family = family_name;
}
/* We try to extract the style name from the full name. */
/* We need to ignore spaces and dashes during the search. */
if ( full && family )
{
while ( *fullp )
{
/* skip common characters at the start of both strings */
if ( *fullp == *family )
{
family++;
fullp++;
continue;
}
/* ignore spaces and dashes in full name during comparison */
if ( *fullp == ' ' || *fullp == '-' )
{
fullp++;
continue;
}
/* ignore spaces and dashes in family name during comparison */
if ( *family == ' ' || *family == '-' )
{
family++;
continue;
}
if ( !*family && *fullp )
{
/* The full name begins with the same characters as the */
/* family name, with spaces and dashes removed. In this */
/* case, the remaining string in `fullp' will be used as */
/* the style name. */
style_name = cff_strcpy( memory, fullp );
/* remove the style part from the family name (if present) */
remove_style( cffface->family_name, style_name );
}
break;
}
}
}
else
{
char *cid_font_name =
cff_index_get_sid_string( cff,
dict->cid_font_name );
/* do we have a `/FontName' for a CID-keyed font? */
if ( cid_font_name )
cffface->family_name = cff_strcpy( memory, cid_font_name );
}
if ( style_name )
cffface->style_name = style_name;
else
/* assume "Regular" style if we don't know better */
cffface->style_name = cff_strcpy( memory, (char *)"Regular" );
/*******************************************************************/
/* */
/* Compute face flags. */
/* */
/* scalable outlines */
flags = FT_FACE_FLAG_SCALABLE |
/* horizontal data */
FT_FACE_FLAG_HORIZONTAL |
/* has native hinter */
FT_FACE_FLAG_HINTER;
if ( sfnt_format )
flags |= FT_FACE_FLAG_SFNT;
/* fixed width font? */
if ( dict->is_fixed_pitch )
flags |= FT_FACE_FLAG_FIXED_WIDTH;
/* XXX: WE DO NOT SUPPORT KERNING METRICS IN THE GPOS TABLE FOR NOW */
#if 0
/* kerning available? */
if ( face->kern_pairs )
flags |= FT_FACE_FLAG_KERNING;
#endif
cffface->face_flags = flags;
/*******************************************************************/
/* */
/* Compute style flags. */
/* */
flags = 0;
if ( dict->italic_angle )
flags |= FT_STYLE_FLAG_ITALIC;
{
char *weight = cff_index_get_sid_string( cff,
dict->weight );
if ( weight )
if ( !ft_strcmp( weight, "Bold" ) ||
!ft_strcmp( weight, "Black" ) )
flags |= FT_STYLE_FLAG_BOLD;
}
/* double check */
if ( !(flags & FT_STYLE_FLAG_BOLD) && cffface->style_name )
if ( !ft_strncmp( cffface->style_name, "Bold", 4 ) ||
!ft_strncmp( cffface->style_name, "Black", 5 ) )
flags |= FT_STYLE_FLAG_BOLD;
cffface->style_flags = flags;
}
#ifndef FT_CONFIG_OPTION_NO_GLYPH_NAMES
/* CID-keyed CFF fonts don't have glyph names -- the SFNT loader */
/* has unset this flag because of the 3.0 `post' table. */
if ( dict->cid_registry == 0xFFFFU )
cffface->face_flags |= FT_FACE_FLAG_GLYPH_NAMES;
#endif
if ( dict->cid_registry != 0xFFFFU && pure_cff )
cffface->face_flags |= FT_FACE_FLAG_CID_KEYED;
/*******************************************************************/
/* */
/* Compute char maps. */
/* */
/* Try to synthesize a Unicode charmap if there is none available */
/* already. If an OpenType font contains a Unicode "cmap", we */
/* will use it, whatever be in the CFF part of the file. */
{
FT_CharMapRec cmaprec;
FT_CharMap cmap;
FT_UInt nn;
CFF_Encoding encoding = &cff->encoding;
for ( nn = 0; nn < (FT_UInt)cffface->num_charmaps; nn++ )
{
cmap = cffface->charmaps[nn];
/* Windows Unicode? */
if ( cmap->platform_id == TT_PLATFORM_MICROSOFT &&
cmap->encoding_id == TT_MS_ID_UNICODE_CS )
goto Skip_Unicode;
/* Apple Unicode platform id? */
if ( cmap->platform_id == TT_PLATFORM_APPLE_UNICODE )
/* Apple Unicode */
goto Skip_Unicode;
}
/* since CID-keyed fonts don't contain glyph names, we can't */
/* construct a cmap */
if ( pure_cff && cff->top_font.font_dict.cid_registry != 0xFFFFU )
goto Exit;
#ifdef FT_MAX_CHARMAP_CACHEABLE
if ( nn + 1 > FT_MAX_CHARMAP_CACHEABLE )
{
FT_ERROR(( "cff_face_init: no Unicode cmap is found, "
"and too many subtables (%d) to add synthesized cmap\n",
nn ));
goto Exit;
}
#endif
/* we didn't find a Unicode charmap -- synthesize one */
cmaprec.face = cffface;
cmaprec.platform_id = TT_PLATFORM_MICROSOFT;
cmaprec.encoding_id = TT_MS_ID_UNICODE_CS;
cmaprec.encoding = FT_ENCODING_UNICODE;
nn = (FT_UInt)cffface->num_charmaps;
error = FT_CMap_New( &CFF_CMAP_UNICODE_CLASS_REC_GET, NULL,
&cmaprec, NULL );
if ( error && FT_Err_No_Unicode_Glyph_Name != error )
goto Exit;
error = FT_Err_Ok;
/* if no Unicode charmap was previously selected, select this one */
if ( cffface->charmap == NULL && nn != (FT_UInt)cffface->num_charmaps )
cffface->charmap = cffface->charmaps[nn];
Skip_Unicode:
#ifdef FT_MAX_CHARMAP_CACHEABLE
if ( nn > FT_MAX_CHARMAP_CACHEABLE )
{
FT_ERROR(( "cff_face_init: Unicode cmap is found, "
"but too many preceding subtables (%d) to access\n",
nn - 1 ));
goto Exit;
}
#endif
if ( encoding->count > 0 )
{
FT_CMap_Class clazz;
cmaprec.face = cffface;
/* Adobe platform id */
cmaprec.platform_id = TT_PLATFORM_ADOBE;
if ( encoding->offset == 0 )
{
cmaprec.encoding_id = TT_ADOBE_ID_STANDARD;
cmaprec.encoding = FT_ENCODING_ADOBE_STANDARD;
clazz = &CFF_CMAP_ENCODING_CLASS_REC_GET;
}
else if ( encoding->offset == 1 )
{
cmaprec.encoding_id = TT_ADOBE_ID_EXPERT;
cmaprec.encoding = FT_ENCODING_ADOBE_EXPERT;
clazz = &CFF_CMAP_ENCODING_CLASS_REC_GET;
}
else
{
cmaprec.encoding_id = TT_ADOBE_ID_CUSTOM;
cmaprec.encoding = FT_ENCODING_ADOBE_CUSTOM;
clazz = &CFF_CMAP_ENCODING_CLASS_REC_GET;
}
error = FT_CMap_New( clazz, NULL, &cmaprec, NULL );
}
}
}
Exit:
return error;
}
FT_LOCAL_DEF( void )
/* CFF_Face */
cff_face_done( FT_Face cffface )
{
CFF_Face face = (CFF_Face)cffface;
FT_Memory memory;
SFNT_Service sfnt;
if ( !face )
return;
memory = cffface->memory;
sfnt = (SFNT_Service)face->sfnt;
if ( sfnt )
sfnt->done_face( face );
{
CFF_Font cff = (CFF_Font)face->extra.data;
if ( cff )
{
cff_font_done( cff );
FT_FREE( face->extra.data );
}
}
}
FT_LOCAL_DEF( FT_Error )
cff_driver_init( FT_Module module )
{
FT_UNUSED( module );
return CFF_Err_Ok;
}
FT_LOCAL_DEF( void )
cff_driver_done( FT_Module module )
{
FT_UNUSED( module );
}
/* END */
/***************************************************************************/
/* */
/* cffgload.c */
/* */
/* OpenType Glyph Loader (body). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cffgload
typedef enum CFF_Operator_
{
cff_op_unknown = 0,
cff_op_rmoveto,
cff_op_hmoveto,
cff_op_vmoveto,
cff_op_rlineto,
cff_op_hlineto,
cff_op_vlineto,
cff_op_rrcurveto,
cff_op_hhcurveto,
cff_op_hvcurveto,
cff_op_rcurveline,
cff_op_rlinecurve,
cff_op_vhcurveto,
cff_op_vvcurveto,
cff_op_flex,
cff_op_hflex,
cff_op_hflex1,
cff_op_flex1,
cff_op_endchar,
cff_op_hstem,
cff_op_vstem,
cff_op_hstemhm,
cff_op_vstemhm,
cff_op_hintmask,
cff_op_cntrmask,
/* deprecated, acts as no-op */
cff_op_dotsection,
cff_op_abs,
cff_op_add,
cff_op_sub,
cff_op_div,
cff_op_neg,
cff_op_random,
cff_op_mul,
cff_op_sqrt,
cff_op_blend,
cff_op_drop,
cff_op_exch,
cff_op_index,
cff_op_roll,
cff_op_dup,
cff_op_put,
cff_op_get,
cff_op_store,
cff_op_load,
cff_op_and,
cff_op_or,
cff_op_not,
cff_op_eq,
cff_op_ifelse,
cff_op_callsubr,
cff_op_callgsubr,
cff_op_return,
/* Type 1 opcodes: invalid but seen in real life */
cff_op_hsbw,
cff_op_closepath,
cff_op_callothersubr,
cff_op_pop,
cff_op_seac,
cff_op_sbw,
cff_op_setcurrentpoint,
/* do not remove */
cff_op_max
} CFF_Operator;
#define CFF_COUNT_CHECK_WIDTH 0x80
#define CFF_COUNT_EXACT 0x40
#define CFF_COUNT_CLEAR_STACK 0x20
/* count values which have the `CFF_COUNT_CHECK_WIDTH' flag set are */
/* used for checking the width and requested numbers of arguments */
/* only; they are set to zero afterwards */
/* the other two flags are informative only and unused currently */
static const FT_Byte cff_argument_counts[] =
{
/* unknown */
0,
/* rmoveto */
2 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT,
1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT,
1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT,
/* rlineto */
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
/* rrcurveto */
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
/* flex */
13,
7,
9,
11,
/* endchar */
0 | CFF_COUNT_CHECK_WIDTH,
/* hstem */
2 | CFF_COUNT_CHECK_WIDTH,
2 | CFF_COUNT_CHECK_WIDTH,
2 | CFF_COUNT_CHECK_WIDTH,
2 | CFF_COUNT_CHECK_WIDTH,
/* hintmask */
0 | CFF_COUNT_CHECK_WIDTH,
/* cntrmask */
0 | CFF_COUNT_CHECK_WIDTH,
/* dotsection */
0,
/* abs */
1,
2,
2,
2,
1,
0,
2,
1,
/* blend */
1,
/* drop */
1,
2,
1,
2,
1,
/* put */
2,
1,
4,
3,
/* and */
2,
2,
1,
2,
4,
/* callsubr */
1,
1,
0,
/* hsbw */
2,
0,
0,
0,
/* seac */
5,
/* sbw */
4,
/* setcurrentpoint */
2
};
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/********** *********/
/********** *********/
/********** GENERIC CHARSTRING PARSING *********/
/********** *********/
/********** *********/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* cff_builder_init */
/* */
/* <Description> */
/* Initializes a given glyph builder. */
/* */
/* <InOut> */
/* builder :: A pointer to the glyph builder to initialize. */
/* */
/* <Input> */
/* face :: The current face object. */
/* */
/* size :: The current size object. */
/* */
/* glyph :: The current glyph object. */
/* */
/* hinting :: Whether hinting is active. */
/* */
static void
cff_builder_init( CFF_Builder* builder,
TT_Face face,
CFF_Size size,
CFF_GlyphSlot glyph,
FT_Bool hinting )
{
builder->path_begun = 0;
builder->load_points = 1;
builder->face = face;
builder->glyph = glyph;
builder->memory = face->root.memory;
if ( glyph )
{
FT_GlyphLoader loader = glyph->root.internal->loader;
builder->loader = loader;
builder->base = &loader->base.outline;
builder->current = &loader->current.outline;
FT_GlyphLoader_Rewind( loader );
builder->hints_globals = 0;
builder->hints_funcs = 0;
if ( hinting && size )
{
CFF_Internal internal = (CFF_Internal)size->root.internal;
builder->hints_globals = (void *)internal->topfont;
builder->hints_funcs = glyph->root.internal->glyph_hints;
}
}
builder->pos_x = 0;
builder->pos_y = 0;
builder->left_bearing.x = 0;
builder->left_bearing.y = 0;
builder->advance.x = 0;
builder->advance.y = 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* cff_builder_done */
/* */
/* <Description> */
/* Finalizes a given glyph builder. Its contents can still be used */
/* after the call, but the function saves important information */
/* within the corresponding glyph slot. */
/* */
/* <Input> */
/* builder :: A pointer to the glyph builder to finalize. */
/* */
static void
cff_builder_done( CFF_Builder* builder )
{
CFF_GlyphSlot glyph = builder->glyph;
if ( glyph )
glyph->root.outline = *builder->base;
}
/*************************************************************************/
/* */
/* <Function> */
/* cff_compute_bias */
/* */
/* <Description> */
/* Computes the bias value in dependence of the number of glyph */
/* subroutines. */
/* */
/* <Input> */
/* in_charstring_type :: The `CharstringType' value of the top DICT */
/* dictionary. */
/* */
/* num_subrs :: The number of glyph subroutines. */
/* */
/* <Return> */
/* The bias value. */
static FT_Int
cff_compute_bias( FT_Int in_charstring_type,
FT_UInt num_subrs )
{
FT_Int result;
if ( in_charstring_type == 1 )
result = 0;
else if ( num_subrs < 1240 )
result = 107;
else if ( num_subrs < 33900U )
result = 1131;
else
result = 32768U;
return result;
}
/*************************************************************************/
/* */
/* <Function> */
/* cff_decoder_init */
/* */
/* <Description> */
/* Initializes a given glyph decoder. */
/* */
/* <InOut> */
/* decoder :: A pointer to the glyph builder to initialize. */
/* */
/* <Input> */
/* face :: The current face object. */
/* */
/* size :: The current size object. */
/* */
/* slot :: The current glyph object. */
/* */
/* hinting :: Whether hinting is active. */
/* */
/* hint_mode :: The hinting mode. */
/* */
FT_LOCAL_DEF( void )
cff_decoder_init( CFF_Decoder* decoder,
TT_Face face,
CFF_Size size,
CFF_GlyphSlot slot,
FT_Bool hinting,
FT_Render_Mode hint_mode )
{
CFF_Font cff = (CFF_Font)face->extra.data;
/* clear everything */
FT_MEM_ZERO( decoder, sizeof ( *decoder ) );
/* initialize builder */
cff_builder_init( &decoder->builder, face, size, slot, hinting );
/* initialize Type2 decoder */
decoder->cff = cff;
decoder->num_globals = cff->global_subrs_index.count;
decoder->globals = cff->global_subrs;
decoder->globals_bias = cff_compute_bias(
cff->top_font.font_dict.charstring_type,
decoder->num_globals );
decoder->hint_mode = hint_mode;
}
/* this function is used to select the subfont */
/* and the locals subrs array */
FT_LOCAL_DEF( FT_Error )
cff_decoder_prepare( CFF_Decoder* decoder,
CFF_Size size,
FT_UInt glyph_index )
{
CFF_Builder *builder = &decoder->builder;
CFF_Font cff = (CFF_Font)builder->face->extra.data;
CFF_SubFont sub = &cff->top_font;
FT_Error error = CFF_Err_Ok;
/* manage CID fonts */
if ( cff->num_subfonts )
{
FT_Byte fd_index = cff_fd_select_get( &cff->fd_select, glyph_index );
if ( fd_index >= cff->num_subfonts )
{
FT_TRACE4(( "cff_decoder_prepare: invalid CID subfont index\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
FT_TRACE3(( "glyph index %d (subfont %d):\n", glyph_index, fd_index ));
sub = cff->subfonts[fd_index];
if ( builder->hints_funcs && size )
{
CFF_Internal internal = (CFF_Internal)size->root.internal;
/* for CFFs without subfonts, this value has already been set */
builder->hints_globals = (void *)internal->subfonts[fd_index];
}
}
decoder->num_locals = sub->local_subrs_index.count;
decoder->locals = sub->local_subrs;
decoder->locals_bias = cff_compute_bias(
decoder->cff->top_font.font_dict.charstring_type,
decoder->num_locals );
decoder->glyph_width = sub->private_dict.default_width;
decoder->nominal_width = sub->private_dict.nominal_width;
Exit:
return error;
}
/* check that there is enough space for `count' more points */
static FT_Error
check_points( CFF_Builder* builder,
FT_Int count )
{
return FT_GLYPHLOADER_CHECK_POINTS( builder->loader, count, 0 );
}
/* add a new point, do not check space */
static void
cff_builder_add_point( CFF_Builder* builder,
FT_Pos x,
FT_Pos y,
FT_Byte flag )
{
FT_Outline* outline = builder->current;
if ( builder->load_points )
{
FT_Vector* point = outline->points + outline->n_points;
FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points;
point->x = x >> 16;
point->y = y >> 16;
*control = (FT_Byte)( flag ? FT_CURVE_TAG_ON : FT_CURVE_TAG_CUBIC );
}
outline->n_points++;
}
/* check space for a new on-curve point, then add it */
static FT_Error
cff_builder_add_point1( CFF_Builder* builder,
FT_Pos x,
FT_Pos y )
{
FT_Error error;
error = check_points( builder, 1 );
if ( !error )
cff_builder_add_point( builder, x, y, 1 );
return error;
}
/* check space for a new contour, then add it */
static FT_Error
cff_builder_add_contour( CFF_Builder* builder )
{
FT_Outline* outline = builder->current;
FT_Error error;
if ( !builder->load_points )
{
outline->n_contours++;
return CFF_Err_Ok;
}
error = FT_GLYPHLOADER_CHECK_POINTS( builder->loader, 0, 1 );
if ( !error )
{
if ( outline->n_contours > 0 )
outline->contours[outline->n_contours - 1] =
(short)( outline->n_points - 1 );
outline->n_contours++;
}
return error;
}
/* if a path was begun, add its first on-curve point */
static FT_Error
cff_builder_start_point( CFF_Builder* builder,
FT_Pos x,
FT_Pos y )
{
FT_Error error = CFF_Err_Ok;
/* test whether we are building a new contour */
if ( !builder->path_begun )
{
builder->path_begun = 1;
error = cff_builder_add_contour( builder );
if ( !error )
error = cff_builder_add_point1( builder, x, y );
}
return error;
}
/* close the current contour */
static void
cff_builder_close_contour( CFF_Builder* builder )
{
FT_Outline* outline = builder->current;
FT_Int first;
if ( !outline )
return;
first = outline->n_contours <= 1
? 0 : outline->contours[outline->n_contours - 2] + 1;
/* We must not include the last point in the path if it */
/* is located on the first point. */
if ( outline->n_points > 1 )
{
FT_Vector* p1 = outline->points + first;
FT_Vector* p2 = outline->points + outline->n_points - 1;
FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points - 1;
/* `delete' last point only if it coincides with the first */
/* point and if it is not a control point (which can happen). */
if ( p1->x == p2->x && p1->y == p2->y )
if ( *control == FT_CURVE_TAG_ON )
outline->n_points--;
}
if ( outline->n_contours > 0 )
{
/* Don't add contours only consisting of one point, i.e., */
/* check whether begin point and last point are the same. */
if ( first == outline->n_points - 1 )
{
outline->n_contours--;
outline->n_points--;
}
else
outline->contours[outline->n_contours - 1] =
(short)( outline->n_points - 1 );
}
}
static FT_Int
cff_lookup_glyph_by_stdcharcode( CFF_Font cff,
FT_Int charcode )
{
FT_UInt n;
FT_UShort glyph_sid;
/* CID-keyed fonts don't have glyph names */
if ( !cff->charset.sids )
return -1;
/* check range of standard char code */
if ( charcode < 0 || charcode > 255 )
return -1;
/* Get code to SID mapping from `cff_standard_encoding'. */
glyph_sid = cff_get_standard_encoding( (FT_UInt)charcode );
for ( n = 0; n < cff->num_glyphs; n++ )
{
if ( cff->charset.sids[n] == glyph_sid )
return n;
}
return -1;
}
static FT_Error
cff_get_glyph_data( TT_Face face,
FT_UInt glyph_index,
FT_Byte** pointer,
FT_ULong* length )
{
/* For incremental fonts get the character data using the */
/* callback function. */
if ( face->root.internal->incremental_interface )
{
FT_Data data;
FT_Error error =
face->root.internal->incremental_interface->funcs->get_glyph_data(
face->root.internal->incremental_interface->object,
glyph_index, &data );
*pointer = (FT_Byte*)data.pointer;
*length = data.length;
return error;
}
else
{
CFF_Font cff = (CFF_Font)(face->extra.data);
return cff_index_access_element( &cff->charstrings_index, glyph_index,
pointer, length );
}
}
static void
cff_free_glyph_data( TT_Face face,
FT_Byte** pointer,
FT_ULong length )
{
/* For incremental fonts get the character data using the */
/* callback function. */
if ( face->root.internal->incremental_interface )
{
FT_Data data;
data.pointer = *pointer;
data.length = length;
face->root.internal->incremental_interface->funcs->free_glyph_data(
face->root.internal->incremental_interface->object, &data );
}
else
{
CFF_Font cff = (CFF_Font)(face->extra.data);
cff_index_forget_element( &cff->charstrings_index, pointer );
}
}
static FT_Error
cff_operator_seac( CFF_Decoder* decoder,
FT_Pos asb,
FT_Pos adx,
FT_Pos ady,
FT_Int bchar,
FT_Int achar )
{
FT_Error error;
CFF_Builder* builder = &decoder->builder;
FT_Int bchar_index, achar_index;
TT_Face face = decoder->builder.face;
FT_Vector left_bearing, advance;
FT_Byte* charstring;
FT_ULong charstring_len;
FT_Pos glyph_width;
if ( decoder->seac )
{
FT_ERROR(( "cff_operator_seac: invalid nested seac\n" ));
return CFF_Err_Syntax_Error;
}
adx += decoder->builder.left_bearing.x;
ady += decoder->builder.left_bearing.y;
/* Incremental fonts don't necessarily have valid charsets. */
/* They use the character code, not the glyph index, in this case. */
if ( face->root.internal->incremental_interface )
{
bchar_index = bchar;
achar_index = achar;
}
else
{
CFF_Font cff = (CFF_Font)(face->extra.data);
bchar_index = cff_lookup_glyph_by_stdcharcode( cff, bchar );
achar_index = cff_lookup_glyph_by_stdcharcode( cff, achar );
}
if ( bchar_index < 0 || achar_index < 0 )
{
FT_ERROR(( "cff_operator_seac:"
" invalid seac character code arguments\n" ));
return CFF_Err_Syntax_Error;
}
/* If we are trying to load a composite glyph, do not load the */
/* accent character and return the array of subglyphs. */
if ( builder->no_recurse )
{
FT_GlyphSlot glyph = (FT_GlyphSlot)builder->glyph;
FT_GlyphLoader loader = glyph->internal->loader;
FT_SubGlyph subg;
/* reallocate subglyph array if necessary */
error = FT_GlyphLoader_CheckSubGlyphs( loader, 2 );
if ( error )
goto Exit;
subg = loader->current.subglyphs;
/* subglyph 0 = base character */
subg->index = bchar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES |
FT_SUBGLYPH_FLAG_USE_MY_METRICS;
subg->arg1 = 0;
subg->arg2 = 0;
subg++;
/* subglyph 1 = accent character */
subg->index = achar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES;
subg->arg1 = (FT_Int)( adx >> 16 );
subg->arg2 = (FT_Int)( ady >> 16 );
/* set up remaining glyph fields */
glyph->num_subglyphs = 2;
glyph->subglyphs = loader->base.subglyphs;
glyph->format = FT_GLYPH_FORMAT_COMPOSITE;
loader->current.num_subglyphs = 2;
}
FT_GlyphLoader_Prepare( builder->loader );
/* First load `bchar' in builder */
error = cff_get_glyph_data( face, bchar_index,
&charstring, &charstring_len );
if ( !error )
{
/* the seac operator must not be nested */
decoder->seac = TRUE;
error = cff_decoder_parse_charstrings( decoder, charstring,
charstring_len );
decoder->seac = FALSE;
cff_free_glyph_data( face, &charstring, charstring_len );
if ( error )
goto Exit;
}
/* Save the left bearing, advance and glyph width of the base */
/* character as they will be erased by the next load. */
left_bearing = builder->left_bearing;
advance = builder->advance;
glyph_width = decoder->glyph_width;
builder->left_bearing.x = 0;
builder->left_bearing.y = 0;
builder->pos_x = adx - asb;
builder->pos_y = ady;
/* Now load `achar' on top of the base outline. */
error = cff_get_glyph_data( face, achar_index,
&charstring, &charstring_len );
if ( !error )
{
/* the seac operator must not be nested */
decoder->seac = TRUE;
error = cff_decoder_parse_charstrings( decoder, charstring,
charstring_len );
decoder->seac = FALSE;
cff_free_glyph_data( face, &charstring, charstring_len );
if ( error )
goto Exit;
}
/* Restore the left side bearing, advance and glyph width */
/* of the base character. */
builder->left_bearing = left_bearing;
builder->advance = advance;
decoder->glyph_width = glyph_width;
builder->pos_x = 0;
builder->pos_y = 0;
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* cff_decoder_parse_charstrings */
/* */
/* <Description> */
/* Parses a given Type 2 charstrings program. */
/* */
/* <InOut> */
/* decoder :: The current Type 1 decoder. */
/* */
/* <Input> */
/* charstring_base :: The base of the charstring stream. */
/* */
/* charstring_len :: The length in bytes of the charstring stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
cff_decoder_parse_charstrings( CFF_Decoder* decoder,
FT_Byte* charstring_base,
FT_ULong charstring_len )
{
FT_Error error;
CFF_Decoder_Zone* zone;
FT_Byte* ip;
FT_Byte* limit;
CFF_Builder* builder = &decoder->builder;
FT_Pos x, y;
FT_Fixed seed;
FT_Fixed* stack;
FT_Int charstring_type =
decoder->cff->top_font.font_dict.charstring_type;
T2_Hints_Funcs hinter;
/* set default width */
decoder->num_hints = 0;
decoder->read_width = 1;
/* compute random seed from stack address of parameter */
seed = (FT_Fixed)( ( (FT_PtrDist)(char*)&seed ^
(FT_PtrDist)(char*)&decoder ^
(FT_PtrDist)(char*)&charstring_base ) &
FT_ULONG_MAX ) ;
seed = ( seed ^ ( seed >> 10 ) ^ ( seed >> 20 ) ) & 0xFFFFL;
if ( seed == 0 )
seed = 0x7384;
/* initialize the decoder */
decoder->top = decoder->stack;
decoder->zone = decoder->zones;
zone = decoder->zones;
stack = decoder->top;
hinter = (T2_Hints_Funcs)builder->hints_funcs;
builder->path_begun = 0;
zone->base = charstring_base;
limit = zone->limit = charstring_base + charstring_len;
ip = zone->cursor = zone->base;
error = CFF_Err_Ok;
x = builder->pos_x;
y = builder->pos_y;
/* begin hints recording session, if any */
if ( hinter )
hinter->open( hinter->hints );
/* now execute loop */
while ( ip < limit )
{
CFF_Operator op;
FT_Byte v;
/********************************************************************/
/* */
/* Decode operator or operand */
/* */
v = *ip++;
if ( v >= 32 || v == 28 )
{
FT_Int shift = 16;
FT_Int32 val;
/* this is an operand, push it on the stack */
if ( v == 28 )
{
if ( ip + 1 >= limit )
goto Syntax_Error;
val = (FT_Short)( ( (FT_Short)ip[0] << 8 ) | ip[1] );
ip += 2;
}
else if ( v < 247 )
val = (FT_Int32)v - 139;
else if ( v < 251 )
{
if ( ip >= limit )
goto Syntax_Error;
val = ( (FT_Int32)v - 247 ) * 256 + *ip++ + 108;
}
else if ( v < 255 )
{
if ( ip >= limit )
goto Syntax_Error;
val = -( (FT_Int32)v - 251 ) * 256 - *ip++ - 108;
}
else
{
if ( ip + 3 >= limit )
goto Syntax_Error;
val = ( (FT_Int32)ip[0] << 24 ) |
( (FT_Int32)ip[1] << 16 ) |
( (FT_Int32)ip[2] << 8 ) |
ip[3];
ip += 4;
if ( charstring_type == 2 )
shift = 0;
}
if ( decoder->top - stack >= CFF_MAX_OPERANDS )
goto Stack_Overflow;
val <<= shift;
*decoder->top++ = val;
}
else
{
/* The specification says that normally arguments are to be taken */
/* from the bottom of the stack. However, this seems not to be */
/* correct, at least for Acroread 7.0.8 on GNU/Linux: It pops the */
/* arguments similar to a PS interpreter. */
FT_Fixed* args = decoder->top;
FT_Int num_args = (FT_Int)( args - decoder->stack );
FT_Int req_args;
/* find operator */
op = cff_op_unknown;
switch ( v )
{
case 1:
op = cff_op_hstem;
break;
case 3:
op = cff_op_vstem;
break;
case 4:
op = cff_op_vmoveto;
break;
case 5:
op = cff_op_rlineto;
break;
case 6:
op = cff_op_hlineto;
break;
case 7:
op = cff_op_vlineto;
break;
case 8:
op = cff_op_rrcurveto;
break;
case 9:
op = cff_op_closepath;
break;
case 10:
op = cff_op_callsubr;
break;
case 11:
op = cff_op_return;
break;
case 12:
{
if ( ip >= limit )
goto Syntax_Error;
v = *ip++;
switch ( v )
{
case 0:
op = cff_op_dotsection;
break;
/* this is actually the Type1 vstem3 operator */
case 1:
op = cff_op_vstem;
break;
/* this is actually the Type1 hstem3 operator */
case 2:
op = cff_op_hstem;
break;
case 3:
op = cff_op_and;
break;
case 4:
op = cff_op_or;
break;
case 5:
op = cff_op_not;
break;
case 6:
op = cff_op_seac;
break;
case 7:
op = cff_op_sbw;
break;
case 8:
op = cff_op_store;
break;
case 9:
op = cff_op_abs;
break;
case 10:
op = cff_op_add;
break;
case 11:
op = cff_op_sub;
break;
case 12:
op = cff_op_div;
break;
case 13:
op = cff_op_load;
break;
case 14:
op = cff_op_neg;
break;
case 15:
op = cff_op_eq;
break;
case 16:
op = cff_op_callothersubr;
break;
case 17:
op = cff_op_pop;
break;
case 18:
op = cff_op_drop;
break;
case 20:
op = cff_op_put;
break;
case 21:
op = cff_op_get;
break;
case 22:
op = cff_op_ifelse;
break;
case 23:
op = cff_op_random;
break;
case 24:
op = cff_op_mul;
break;
case 26:
op = cff_op_sqrt;
break;
case 27:
op = cff_op_dup;
break;
case 28:
op = cff_op_exch;
break;
case 29:
op = cff_op_index;
break;
case 30:
op = cff_op_roll;
break;
case 33:
op = cff_op_setcurrentpoint;
break;
case 34:
op = cff_op_hflex;
break;
case 35:
op = cff_op_flex;
break;
case 36:
op = cff_op_hflex1;
break;
case 37:
op = cff_op_flex1;
break;
default:
FT_TRACE4(( " unknown op (12, %d)\n", v ));
break;
}
}
break;
case 13:
op = cff_op_hsbw;
break;
case 14:
op = cff_op_endchar;
break;
case 16:
op = cff_op_blend;
break;
case 18:
op = cff_op_hstemhm;
break;
case 19:
op = cff_op_hintmask;
break;
case 20:
op = cff_op_cntrmask;
break;
case 21:
op = cff_op_rmoveto;
break;
case 22:
op = cff_op_hmoveto;
break;
case 23:
op = cff_op_vstemhm;
break;
case 24:
op = cff_op_rcurveline;
break;
case 25:
op = cff_op_rlinecurve;
break;
case 26:
op = cff_op_vvcurveto;
break;
case 27:
op = cff_op_hhcurveto;
break;
case 29:
op = cff_op_callgsubr;
break;
case 30:
op = cff_op_vhcurveto;
break;
case 31:
op = cff_op_hvcurveto;
break;
default:
FT_TRACE4(( " unknown op (%d)\n", v ));
break;
}
if ( op == cff_op_unknown )
continue;
/* check arguments */
req_args = cff_argument_counts[op];
if ( req_args & CFF_COUNT_CHECK_WIDTH )
{
if ( num_args > 0 && decoder->read_width )
{
/* If `nominal_width' is non-zero, the number is really a */
/* difference against `nominal_width'. Else, the number here */
/* is truly a width, not a difference against `nominal_width'. */
/* If the font does not set `nominal_width', then */
/* `nominal_width' defaults to zero, and so we can set */
/* `glyph_width' to `nominal_width' plus number on the stack */
/* -- for either case. */
FT_Int set_width_ok;
switch ( op )
{
case cff_op_hmoveto:
case cff_op_vmoveto:
set_width_ok = num_args & 2;
break;
case cff_op_hstem:
case cff_op_vstem:
case cff_op_hstemhm:
case cff_op_vstemhm:
case cff_op_rmoveto:
case cff_op_hintmask:
case cff_op_cntrmask:
set_width_ok = num_args & 1;
break;
case cff_op_endchar:
/* If there is a width specified for endchar, we either have */
/* 1 argument or 5 arguments. We like to argue. */
set_width_ok = ( num_args == 5 ) || ( num_args == 1 );
break;
default:
set_width_ok = 0;
break;
}
if ( set_width_ok )
{
decoder->glyph_width = decoder->nominal_width +
( stack[0] >> 16 );
if ( decoder->width_only )
{
/* we only want the advance width; stop here */
break;
}
/* Consumed an argument. */
num_args--;
}
}
decoder->read_width = 0;
req_args = 0;
}
req_args &= 0x000F;
if ( num_args < req_args )
goto Stack_Underflow;
args -= req_args;
num_args -= req_args;
/* At this point, `args' points to the first argument of the */
/* operand in case `req_args' isn't zero. Otherwise, we have */
/* to adjust `args' manually. */
/* Note that we only pop arguments from the stack which we */
/* really need and can digest so that we can continue in case */
/* of superfluous stack elements. */
switch ( op )
{
case cff_op_hstem:
case cff_op_vstem:
case cff_op_hstemhm:
case cff_op_vstemhm:
/* the number of arguments is always even here */
FT_TRACE4((
op == cff_op_hstem ? " hstem\n" :
( op == cff_op_vstem ? " vstem\n" :
( op == cff_op_hstemhm ? " hstemhm\n" : " vstemhm\n" ) ) ));
if ( hinter )
hinter->stems( hinter->hints,
( op == cff_op_hstem || op == cff_op_hstemhm ),
num_args / 2,
args - ( num_args & ~1 ) );
decoder->num_hints += num_args / 2;
args = stack;
break;
case cff_op_hintmask:
case cff_op_cntrmask:
FT_TRACE4(( op == cff_op_hintmask ? " hintmask" : " cntrmask" ));
/* implement vstem when needed -- */
/* the specification doesn't say it, but this also works */
/* with the 'cntrmask' operator */
/* */
if ( num_args > 0 )
{
if ( hinter )
hinter->stems( hinter->hints,
0,
num_args / 2,
args - ( num_args & ~1 ) );
decoder->num_hints += num_args / 2;
}
/* In a valid charstring there must be at least one byte */
/* after `hintmask' or `cntrmask' (e.g., for a `return' */
/* instruction). Additionally, there must be space for */
/* `num_hints' bits. */
if ( ( ip + ( ( decoder->num_hints + 7 ) >> 3 ) ) >= limit )
goto Syntax_Error;
if ( hinter )
{
if ( op == cff_op_hintmask )
hinter->hintmask( hinter->hints,
builder->current->n_points,
decoder->num_hints,
ip );
else
hinter->counter( hinter->hints,
decoder->num_hints,
ip );
}
ip += ( decoder->num_hints + 7 ) >> 3;
args = stack;
break;
case cff_op_rmoveto:
FT_TRACE4(( " rmoveto\n" ));
cff_builder_close_contour( builder );
builder->path_begun = 0;
x += args[-2];
y += args[-1];
args = stack;
break;
case cff_op_vmoveto:
FT_TRACE4(( " vmoveto\n" ));
cff_builder_close_contour( builder );
builder->path_begun = 0;
y += args[-1];
args = stack;
break;
case cff_op_hmoveto:
FT_TRACE4(( " hmoveto\n" ));
cff_builder_close_contour( builder );
builder->path_begun = 0;
x += args[-1];
args = stack;
break;
case cff_op_rlineto:
FT_TRACE4(( " rlineto\n" ));
if ( cff_builder_start_point ( builder, x, y ) ||
check_points( builder, num_args / 2 ) )
goto Fail;
if ( num_args < 2 )
goto Stack_Underflow;
args -= num_args & ~1;
while ( args < decoder->top )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 1 );
args += 2;
}
args = stack;
break;
case cff_op_hlineto:
case cff_op_vlineto:
{
FT_Int phase = ( op == cff_op_hlineto );
FT_TRACE4(( op == cff_op_hlineto ? " hlineto\n"
: " vlineto\n" ));
if ( num_args < 0 )
goto Stack_Underflow;
/* there exist subsetted fonts (found in PDFs) */
/* which call `hlineto' without arguments */
if ( num_args == 0 )
break;
if ( cff_builder_start_point ( builder, x, y ) ||
check_points( builder, num_args ) )
goto Fail;
args = stack;
while ( args < decoder->top )
{
if ( phase )
x += args[0];
else
y += args[0];
if ( cff_builder_add_point1( builder, x, y ) )
goto Fail;
args++;
phase ^= 1;
}
args = stack;
}
break;
case cff_op_rrcurveto:
{
FT_Int nargs;
FT_TRACE4(( " rrcurveto\n" ));
if ( num_args < 6 )
goto Stack_Underflow;
nargs = num_args - num_args % 6;
if ( cff_builder_start_point ( builder, x, y ) ||
check_points( builder, nargs / 2 ) )
goto Fail;
args -= nargs;
while ( args < decoder->top )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 0 );
x += args[2];
y += args[3];
cff_builder_add_point( builder, x, y, 0 );
x += args[4];
y += args[5];
cff_builder_add_point( builder, x, y, 1 );
args += 6;
}
args = stack;
}
break;
case cff_op_vvcurveto:
{
FT_Int nargs;
FT_TRACE4(( " vvcurveto\n" ));
if ( num_args < 4 )
goto Stack_Underflow;
/* if num_args isn't of the form 4n or 4n+1, */
/* we enforce it by clearing the second bit */
nargs = num_args & ~2;
if ( cff_builder_start_point( builder, x, y ) )
goto Fail;
args -= nargs;
if ( nargs & 1 )
{
x += args[0];
args++;
nargs--;
}
if ( check_points( builder, 3 * ( nargs / 4 ) ) )
goto Fail;
while ( args < decoder->top )
{
y += args[0];
cff_builder_add_point( builder, x, y, 0 );
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
y += args[3];
cff_builder_add_point( builder, x, y, 1 );
args += 4;
}
args = stack;
}
break;
case cff_op_hhcurveto:
{
FT_Int nargs;
FT_TRACE4(( " hhcurveto\n" ));
if ( num_args < 4 )
goto Stack_Underflow;
/* if num_args isn't of the form 4n or 4n+1, */
/* we enforce it by clearing the second bit */
nargs = num_args & ~2;
if ( cff_builder_start_point( builder, x, y ) )
goto Fail;
args -= nargs;
if ( nargs & 1 )
{
y += args[0];
args++;
nargs--;
}
if ( check_points( builder, 3 * ( nargs / 4 ) ) )
goto Fail;
while ( args < decoder->top )
{
x += args[0];
cff_builder_add_point( builder, x, y, 0 );
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
x += args[3];
cff_builder_add_point( builder, x, y, 1 );
args += 4;
}
args = stack;
}
break;
case cff_op_vhcurveto:
case cff_op_hvcurveto:
{
FT_Int phase;
FT_Int nargs;
FT_TRACE4(( op == cff_op_vhcurveto ? " vhcurveto\n"
: " hvcurveto\n" ));
if ( cff_builder_start_point( builder, x, y ) )
goto Fail;
if ( num_args < 4 )
goto Stack_Underflow;
/* if num_args isn't of the form 8n, 8n+1, 8n+4, or 8n+5, */
/* we enforce it by clearing the second bit */
nargs = num_args & ~2;
args -= nargs;
if ( check_points( builder, ( nargs / 4 ) * 3 ) )
goto Stack_Underflow;
phase = ( op == cff_op_hvcurveto );
while ( nargs >= 4 )
{
nargs -= 4;
if ( phase )
{
x += args[0];
cff_builder_add_point( builder, x, y, 0 );
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
y += args[3];
if ( nargs == 1 )
x += args[4];
cff_builder_add_point( builder, x, y, 1 );
}
else
{
y += args[0];
cff_builder_add_point( builder, x, y, 0 );
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
x += args[3];
if ( nargs == 1 )
y += args[4];
cff_builder_add_point( builder, x, y, 1 );
}
args += 4;
phase ^= 1;
}
args = stack;
}
break;
case cff_op_rlinecurve:
{
FT_Int num_lines;
FT_Int nargs;
FT_TRACE4(( " rlinecurve\n" ));
if ( num_args < 8 )
goto Stack_Underflow;
nargs = num_args & ~1;
num_lines = ( nargs - 6 ) / 2;
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, num_lines + 3 ) )
goto Fail;
args -= nargs;
/* first, add the line segments */
while ( num_lines > 0 )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 1 );
args += 2;
num_lines--;
}
/* then the curve */
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 0 );
x += args[2];
y += args[3];
cff_builder_add_point( builder, x, y, 0 );
x += args[4];
y += args[5];
cff_builder_add_point( builder, x, y, 1 );
args = stack;
}
break;
case cff_op_rcurveline:
{
FT_Int num_curves;
FT_Int nargs;
FT_TRACE4(( " rcurveline\n" ));
if ( num_args < 8 )
goto Stack_Underflow;
nargs = num_args - 2;
nargs = nargs - nargs % 6 + 2;
num_curves = ( nargs - 2 ) / 6;
if ( cff_builder_start_point ( builder, x, y ) ||
check_points( builder, num_curves * 3 + 2 ) )
goto Fail;
args -= nargs;
/* first, add the curves */
while ( num_curves > 0 )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 0 );
x += args[2];
y += args[3];
cff_builder_add_point( builder, x, y, 0 );
x += args[4];
y += args[5];
cff_builder_add_point( builder, x, y, 1 );
args += 6;
num_curves--;
}
/* then the final line */
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 1 );
args = stack;
}
break;
case cff_op_hflex1:
{
FT_Pos start_y;
FT_TRACE4(( " hflex1\n" ));
/* adding five more points: 4 control points, 1 on-curve point */
/* -- make sure we have enough space for the start point if it */
/* needs to be added */
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Fail;
/* record the starting point's y position for later use */
start_y = y;
/* first control point */
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 0 );
/* second control point */
x += args[2];
y += args[3];
cff_builder_add_point( builder, x, y, 0 );
/* join point; on curve, with y-value the same as the last */
/* control point's y-value */
x += args[4];
cff_builder_add_point( builder, x, y, 1 );
/* third control point, with y-value the same as the join */
/* point's y-value */
x += args[5];
cff_builder_add_point( builder, x, y, 0 );
/* fourth control point */
x += args[6];
y += args[7];
cff_builder_add_point( builder, x, y, 0 );
/* ending point, with y-value the same as the start */
x += args[8];
y = start_y;
cff_builder_add_point( builder, x, y, 1 );
args = stack;
break;
}
case cff_op_hflex:
{
FT_Pos start_y;
FT_TRACE4(( " hflex\n" ));
/* adding six more points; 4 control points, 2 on-curve points */
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Fail;
/* record the starting point's y-position for later use */
start_y = y;
/* first control point */
x += args[0];
cff_builder_add_point( builder, x, y, 0 );
/* second control point */
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
/* join point; on curve, with y-value the same as the last */
/* control point's y-value */
x += args[3];
cff_builder_add_point( builder, x, y, 1 );
/* third control point, with y-value the same as the join */
/* point's y-value */
x += args[4];
cff_builder_add_point( builder, x, y, 0 );
/* fourth control point */
x += args[5];
y = start_y;
cff_builder_add_point( builder, x, y, 0 );
/* ending point, with y-value the same as the start point's */
/* y-value -- we don't add this point, though */
x += args[6];
cff_builder_add_point( builder, x, y, 1 );
args = stack;
break;
}
case cff_op_flex1:
{
/* record start x, y values for */
FT_Pos start_x, start_y;
/* alter use */
/* used in horizontal/vertical */
FT_Fixed dx = 0, dy = 0;
/* algorithm below */
FT_Int horizontal, count;
FT_Fixed* temp;
FT_TRACE4(( " flex1\n" ));
/* adding six more points; 4 control points, 2 on-curve points */
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Fail;
/* record the starting point's x, y position for later use */
start_x = x;
start_y = y;
/* XXX: figure out whether this is supposed to be a horizontal */
/* or vertical flex; the Type 2 specification is vague... */
temp = args;
/* grab up to the last argument */
for ( count = 5; count > 0; count-- )
{
dx += temp[0];
dy += temp[1];
temp += 2;
}
if ( dx < 0 )
dx = -dx;
if ( dy < 0 )
dy = -dy;
/* strange test, but here it is... */
horizontal = ( dx > dy );
for ( count = 5; count > 0; count-- )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y,
(FT_Bool)( count == 3 ) );
args += 2;
}
/* is last operand an x- or y-delta? */
if ( horizontal )
{
x += args[0];
y = start_y;
}
else
{
x = start_x;
y += args[0];
}
cff_builder_add_point( builder, x, y, 1 );
args = stack;
break;
}
case cff_op_flex:
{
FT_UInt count;
FT_TRACE4(( " flex\n" ));
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Fail;
for ( count = 6; count > 0; count-- )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y,
(FT_Bool)( count == 4 || count == 1 ) );
args += 2;
}
args = stack;
}
break;
case cff_op_seac:
FT_TRACE4(( " seac\n" ));
error = cff_operator_seac( decoder,
args[0], args[1], args[2],
(FT_Int)( args[3] >> 16 ),
(FT_Int)( args[4] >> 16 ) );
/* add current outline to the glyph slot */
FT_GlyphLoader_Add( builder->loader );
/* return now! */
FT_TRACE4(( "\n" ));
return error;
case cff_op_endchar:
FT_TRACE4(( " endchar\n" ));
/* We are going to emulate the seac operator. */
if ( num_args >= 4 )
{
/* Save glyph width so that the subglyphs don't overwrite it. */
FT_Pos glyph_width = decoder->glyph_width;
error = cff_operator_seac( decoder,
0L, args[-4], args[-3],
(FT_Int)( args[-2] >> 16 ),
(FT_Int)( args[-1] >> 16 ) );
decoder->glyph_width = glyph_width;
}
else
{
if ( !error )
error = CFF_Err_Ok;
cff_builder_close_contour( builder );
/* close hints recording session */
if ( hinter )
{
if ( hinter->close( hinter->hints,
builder->current->n_points ) )
goto Syntax_Error;
/* apply hints to the loaded glyph outline now */
hinter->apply( hinter->hints,
builder->current,
(PSH_Globals)builder->hints_globals,
decoder->hint_mode );
}
/* add current outline to the glyph slot */
FT_GlyphLoader_Add( builder->loader );
}
/* return now! */
FT_TRACE4(( "\n" ));
return error;
case cff_op_abs:
FT_TRACE4(( " abs\n" ));
if ( args[0] < 0 )
args[0] = -args[0];
args++;
break;
case cff_op_add:
FT_TRACE4(( " add\n" ));
args[0] += args[1];
args++;
break;
case cff_op_sub:
FT_TRACE4(( " sub\n" ));
args[0] -= args[1];
args++;
break;
case cff_op_div:
FT_TRACE4(( " div\n" ));
args[0] = FT_DivFix( args[0], args[1] );
args++;
break;
case cff_op_neg:
FT_TRACE4(( " neg\n" ));
args[0] = -args[0];
args++;
break;
case cff_op_random:
{
FT_Fixed Rand;
FT_TRACE4(( " rand\n" ));
Rand = seed;
if ( Rand >= 0x8000L )
Rand++;
args[0] = Rand;
seed = FT_MulFix( seed, 0x10000L - seed );
if ( seed == 0 )
seed += 0x2873;
args++;
}
break;
case cff_op_mul:
FT_TRACE4(( " mul\n" ));
args[0] = FT_MulFix( args[0], args[1] );
args++;
break;
case cff_op_sqrt:
FT_TRACE4(( " sqrt\n" ));
if ( args[0] > 0 )
{
FT_Int count = 9;
FT_Fixed root = args[0];
FT_Fixed new_root;
for (;;)
{
new_root = ( root + FT_DivFix( args[0], root ) + 1 ) >> 1;
if ( new_root == root || count <= 0 )
break;
root = new_root;
}
args[0] = new_root;
}
else
args[0] = 0;
args++;
break;
case cff_op_drop:
/* nothing */
FT_TRACE4(( " drop\n" ));
break;
case cff_op_exch:
{
FT_Fixed tmp;
FT_TRACE4(( " exch\n" ));
tmp = args[0];
args[0] = args[1];
args[1] = tmp;
args += 2;
}
break;
case cff_op_index:
{
FT_Int idx = (FT_Int)( args[0] >> 16 );
FT_TRACE4(( " index\n" ));
if ( idx < 0 )
idx = 0;
else if ( idx > num_args - 2 )
idx = num_args - 2;
args[0] = args[-( idx + 1 )];
args++;
}
break;
case cff_op_roll:
{
FT_Int count = (FT_Int)( args[0] >> 16 );
FT_Int idx = (FT_Int)( args[1] >> 16 );
FT_TRACE4(( " roll\n" ));
if ( count <= 0 )
count = 1;
args -= count;
if ( args < stack )
goto Stack_Underflow;
if ( idx >= 0 )
{
while ( idx > 0 )
{
FT_Fixed tmp = args[count - 1];
FT_Int i;
for ( i = count - 2; i >= 0; i-- )
args[i + 1] = args[i];
args[0] = tmp;
idx--;
}
}
else
{
while ( idx < 0 )
{
FT_Fixed tmp = args[0];
FT_Int i;
for ( i = 0; i < count - 1; i++ )
args[i] = args[i + 1];
args[count - 1] = tmp;
idx++;
}
}
args += count;
}
break;
case cff_op_dup:
FT_TRACE4(( " dup\n" ));
args[1] = args[0];
args += 2;
break;
case cff_op_put:
{
FT_Fixed val = args[0];
FT_Int idx = (FT_Int)( args[1] >> 16 );
FT_TRACE4(( " put\n" ));
if ( idx >= 0 && idx < CFF_MAX_TRANS_ELEMENTS )
decoder->buildchar[idx] = val;
}
break;
case cff_op_get:
{
FT_Int idx = (FT_Int)( args[0] >> 16 );
FT_Fixed val = 0;
FT_TRACE4(( " get\n" ));
if ( idx >= 0 && idx < CFF_MAX_TRANS_ELEMENTS )
val = decoder->buildchar[idx];
args[0] = val;
args++;
}
break;
case cff_op_store:
FT_TRACE4(( " store\n"));
goto Unimplemented;
case cff_op_load:
FT_TRACE4(( " load\n" ));
goto Unimplemented;
case cff_op_dotsection:
/* this operator is deprecated and ignored by the parser */
FT_TRACE4(( " dotsection\n" ));
break;
case cff_op_closepath:
/* this is an invalid Type 2 operator; however, there */
/* exist fonts which are incorrectly converted from probably */
/* Type 1 to CFF, and some parsers seem to accept it */
FT_TRACE4(( " closepath (invalid op)\n" ));
args = stack;
break;
case cff_op_hsbw:
/* this is an invalid Type 2 operator; however, there */
/* exist fonts which are incorrectly converted from probably */
/* Type 1 to CFF, and some parsers seem to accept it */
FT_TRACE4(( " hsbw (invalid op)\n" ));
decoder->glyph_width = decoder->nominal_width + ( args[1] >> 16 );
decoder->builder.left_bearing.x = args[0];
decoder->builder.left_bearing.y = 0;
x = decoder->builder.pos_x + args[0];
y = decoder->builder.pos_y;
args = stack;
break;
case cff_op_sbw:
/* this is an invalid Type 2 operator; however, there */
/* exist fonts which are incorrectly converted from probably */
/* Type 1 to CFF, and some parsers seem to accept it */
FT_TRACE4(( " sbw (invalid op)\n" ));
decoder->glyph_width = decoder->nominal_width + ( args[2] >> 16 );
decoder->builder.left_bearing.x = args[0];
decoder->builder.left_bearing.y = args[1];
x = decoder->builder.pos_x + args[0];
y = decoder->builder.pos_y + args[1];
args = stack;
break;
case cff_op_setcurrentpoint:
/* this is an invalid Type 2 operator; however, there */
/* exist fonts which are incorrectly converted from probably */
/* Type 1 to CFF, and some parsers seem to accept it */
FT_TRACE4(( " setcurrentpoint (invalid op)\n" ));
x = decoder->builder.pos_x + args[0];
y = decoder->builder.pos_y + args[1];
args = stack;
break;
case cff_op_callothersubr:
/* this is an invalid Type 2 operator; however, there */
/* exist fonts which are incorrectly converted from probably */
/* Type 1 to CFF, and some parsers seem to accept it */
FT_TRACE4(( " callothersubr (invalid op)\n" ));
/* subsequent `pop' operands should add the arguments, */
/* this is the implementation described for `unknown' other */
/* subroutines in the Type1 spec. */
/* */
/* XXX Fix return arguments (see discussion below). */
args -= 2 + ( args[-2] >> 16 );
if ( args < stack )
goto Stack_Underflow;
break;
case cff_op_pop:
/* this is an invalid Type 2 operator; however, there */
/* exist fonts which are incorrectly converted from probably */
/* Type 1 to CFF, and some parsers seem to accept it */
FT_TRACE4(( " pop (invalid op)\n" ));
/* XXX Increasing `args' is wrong: After a certain number of */
/* `pop's we get a stack overflow. Reason for doing it is */
/* code like this (actually found in a CFF font): */
/* */
/* 17 1 3 callothersubr */
/* pop */
/* callsubr */
/* */
/* Since we handle `callothersubr' as a no-op, and */
/* `callsubr' needs at least one argument, `pop' can't be a */
/* no-op too as it basically should be. */
/* */
/* The right solution would be to provide real support for */
/* `callothersubr' as done in `t1decode.c', however, given */
/* the fact that CFF fonts with `pop' are invalid, it is */
/* questionable whether it is worth the time. */
args++;
break;
case cff_op_and:
{
FT_Fixed cond = args[0] && args[1];
FT_TRACE4(( " and\n" ));
args[0] = cond ? 0x10000L : 0;
args++;
}
break;
case cff_op_or:
{
FT_Fixed cond = args[0] || args[1];
FT_TRACE4(( " or\n" ));
args[0] = cond ? 0x10000L : 0;
args++;
}
break;
case cff_op_eq:
{
FT_Fixed cond = !args[0];
FT_TRACE4(( " eq\n" ));
args[0] = cond ? 0x10000L : 0;
args++;
}
break;
case cff_op_ifelse:
{
FT_Fixed cond = ( args[2] <= args[3] );
FT_TRACE4(( " ifelse\n" ));
if ( !cond )
args[0] = args[1];
args++;
}
break;
case cff_op_callsubr:
{
FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) +
decoder->locals_bias );
FT_TRACE4(( " callsubr(%d)\n", idx ));
if ( idx >= decoder->num_locals )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" invalid local subr index\n" ));
goto Syntax_Error;
}
if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" too many nested subrs\n" ));
goto Syntax_Error;
}
/* save current instruction pointer */
zone->cursor = ip;
zone++;
zone->base = decoder->locals[idx];
zone->limit = decoder->locals[idx + 1];
zone->cursor = zone->base;
if ( !zone->base || zone->limit == zone->base )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" invoking empty subrs\n" ));
goto Syntax_Error;
}
decoder->zone = zone;
ip = zone->base;
limit = zone->limit;
}
break;
case cff_op_callgsubr:
{
FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) +
decoder->globals_bias );
FT_TRACE4(( " callgsubr(%d)\n", idx ));
if ( idx >= decoder->num_globals )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" invalid global subr index\n" ));
goto Syntax_Error;
}
if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" too many nested subrs\n" ));
goto Syntax_Error;
}
/* save current instruction pointer */
zone->cursor = ip;
zone++;
zone->base = decoder->globals[idx];
zone->limit = decoder->globals[idx + 1];
zone->cursor = zone->base;
if ( !zone->base || zone->limit == zone->base )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" invoking empty subrs\n" ));
goto Syntax_Error;
}
decoder->zone = zone;
ip = zone->base;
limit = zone->limit;
}
break;
case cff_op_return:
FT_TRACE4(( " return\n" ));
if ( decoder->zone <= decoder->zones )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" unexpected return\n" ));
goto Syntax_Error;
}
decoder->zone--;
zone = decoder->zone;
ip = zone->cursor;
limit = zone->limit;
break;
default:
Unimplemented:
FT_ERROR(( "Unimplemented opcode: %d", ip[-1] ));
if ( ip[-1] == 12 )
FT_ERROR(( " %d", ip[0] ));
FT_ERROR(( "\n" ));
return CFF_Err_Unimplemented_Feature;
}
decoder->top = args;
if ( decoder->top - stack >= CFF_MAX_OPERANDS )
goto Stack_Overflow;
/* general operator processing */
}
/* while ip < limit */
}
FT_TRACE4(( "..end..\n\n" ));
Fail:
return error;
Syntax_Error:
FT_TRACE4(( "cff_decoder_parse_charstrings: syntax error\n" ));
return CFF_Err_Invalid_File_Format;
Stack_Underflow:
FT_TRACE4(( "cff_decoder_parse_charstrings: stack underflow\n" ));
return CFF_Err_Too_Few_Arguments;
Stack_Overflow:
FT_TRACE4(( "cff_decoder_parse_charstrings: stack overflow\n" ));
return CFF_Err_Stack_Overflow;
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/********** *********/
/********** *********/
/********** COMPUTE THE MAXIMUM ADVANCE WIDTH *********/
/********** *********/
/********** The following code is in charge of computing *********/
/********** the maximum advance width of the font. It *********/
/********** quickly processes each glyph charstring to *********/
/********** extract the value from either a `sbw' or `seac' *********/
/********** operator. *********/
/********** *********/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* unused until we support pure CFF fonts */
#if 0
FT_LOCAL_DEF( FT_Error )
cff_compute_max_advance( TT_Face face,
FT_Int* max_advance )
{
FT_Error error = CFF_Err_Ok;
CFF_Decoder decoder;
FT_Int glyph_index;
CFF_Font cff = (CFF_Font)face->other;
*max_advance = 0;
/* Initialize load decoder */
cff_decoder_init( &decoder, face, 0, 0, 0, 0 );
decoder.builder.metrics_only = 1;
decoder.builder.load_points = 0;
/* For each glyph, parse the glyph charstring and extract */
/* the advance width. */
for ( glyph_index = 0; glyph_index < face->root.num_glyphs;
glyph_index++ )
{
FT_Byte* charstring;
FT_ULong charstring_len;
/* now get load the unscaled outline */
error = cff_get_glyph_data( face, glyph_index,
&charstring, &charstring_len );
if ( !error )
{
error = cff_decoder_prepare( &decoder, size, glyph_index );
if ( !error )
error = cff_decoder_parse_charstrings( &decoder,
charstring,
charstring_len );
cff_free_glyph_data( face, &charstring, &charstring_len );
}
/* ignore the error if one has occurred -- skip to next glyph */
error = CFF_Err_Ok;
}
*max_advance = decoder.builder.advance.x;
return CFF_Err_Ok;
}
/* 0 */
#endif
FT_LOCAL_DEF( FT_Error )
cff_slot_load( CFF_GlyphSlot glyph,
CFF_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
CFF_Decoder decoder;
TT_Face face = (TT_Face)glyph->root.face;
FT_Bool hinting, force_scaling;
CFF_Font cff = (CFF_Font)face->extra.data;
FT_Matrix font_matrix;
FT_Vector font_offset;
force_scaling = FALSE;
/* in a CID-keyed font, consider `glyph_index' as a CID and map */
/* it immediately to the real glyph_index -- if it isn't a */
/* subsetted font, glyph_indices and CIDs are identical, though */
if ( cff->top_font.font_dict.cid_registry != 0xFFFFU &&
cff->charset.cids )
{
/* don't handle CID 0 (.notdef) which is directly mapped to GID 0 */
if ( glyph_index != 0 )
{
glyph_index = cff_charset_cid_to_gindex( &cff->charset,
glyph_index );
if ( glyph_index == 0 )
return CFF_Err_Invalid_Argument;
}
}
else if ( glyph_index >= cff->num_glyphs )
return CFF_Err_Invalid_Argument;
if ( load_flags & FT_LOAD_NO_RECURSE )
load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING;
glyph->x_scale = 0x10000L;
glyph->y_scale = 0x10000L;
if ( size )
{
glyph->x_scale = size->root.metrics.x_scale;
glyph->y_scale = size->root.metrics.y_scale;
}
/* try to load embedded bitmap if any */
/* */
/* XXX: The convention should be emphasized in */
/* the documents because it can be confusing. */
if ( size )
{
CFF_Face cff_face = (CFF_Face)size->root.face;
SFNT_Service sfnt = (SFNT_Service)cff_face->sfnt;
FT_Stream stream = cff_face->root.stream;
if ( size->strike_index != 0xFFFFFFFFUL &&
sfnt->load_eblc &&
( load_flags & FT_LOAD_NO_BITMAP ) == 0 )
{
TT_SBit_MetricsRec metrics;
error = sfnt->load_sbit_image( face,
size->strike_index,
glyph_index,
(FT_Int)load_flags,
stream,
&glyph->root.bitmap,
&metrics );
if ( !error )
{
glyph->root.outline.n_points = 0;
glyph->root.outline.n_contours = 0;
glyph->root.metrics.width = (FT_Pos)metrics.width << 6;
glyph->root.metrics.height = (FT_Pos)metrics.height << 6;
glyph->root.metrics.horiBearingX = (FT_Pos)metrics.horiBearingX << 6;
glyph->root.metrics.horiBearingY = (FT_Pos)metrics.horiBearingY << 6;
glyph->root.metrics.horiAdvance = (FT_Pos)metrics.horiAdvance << 6;
glyph->root.metrics.vertBearingX = (FT_Pos)metrics.vertBearingX << 6;
glyph->root.metrics.vertBearingY = (FT_Pos)metrics.vertBearingY << 6;
glyph->root.metrics.vertAdvance = (FT_Pos)metrics.vertAdvance << 6;
glyph->root.format = FT_GLYPH_FORMAT_BITMAP;
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
glyph->root.bitmap_left = metrics.vertBearingX;
glyph->root.bitmap_top = metrics.vertBearingY;
}
else
{
glyph->root.bitmap_left = metrics.horiBearingX;
glyph->root.bitmap_top = metrics.horiBearingY;
}
return error;
}
}
}
/* return immediately if we only want the embedded bitmaps */
if ( load_flags & FT_LOAD_SBITS_ONLY )
return CFF_Err_Invalid_Argument;
/* if we have a CID subfont, use its matrix (which has already */
/* been multiplied with the root matrix) */
/* this scaling is only relevant if the PS hinter isn't active */
if ( cff->num_subfonts )
{
FT_ULong top_upm, sub_upm;
FT_Byte fd_index = cff_fd_select_get( &cff->fd_select,
glyph_index );
if ( fd_index >= cff->num_subfonts )
fd_index = (FT_Byte)( cff->num_subfonts - 1 );
top_upm = cff->top_font.font_dict.units_per_em;
sub_upm = cff->subfonts[fd_index]->font_dict.units_per_em;
font_matrix = cff->subfonts[fd_index]->font_dict.font_matrix;
font_offset = cff->subfonts[fd_index]->font_dict.font_offset;
if ( top_upm != sub_upm )
{
glyph->x_scale = FT_MulDiv( glyph->x_scale, top_upm, sub_upm );
glyph->y_scale = FT_MulDiv( glyph->y_scale, top_upm, sub_upm );
force_scaling = TRUE;
}
}
else
{
font_matrix = cff->top_font.font_dict.font_matrix;
font_offset = cff->top_font.font_dict.font_offset;
}
glyph->root.outline.n_points = 0;
glyph->root.outline.n_contours = 0;
hinting = FT_BOOL( ( load_flags & FT_LOAD_NO_SCALE ) == 0 &&
( load_flags & FT_LOAD_NO_HINTING ) == 0 );
/* by default */
glyph->root.format = FT_GLYPH_FORMAT_OUTLINE;
{
FT_Byte* charstring;
FT_ULong charstring_len;
cff_decoder_init( &decoder, face, size, glyph, hinting,
FT_LOAD_TARGET_MODE( load_flags ) );
if ( load_flags & FT_LOAD_ADVANCE_ONLY )
decoder.width_only = TRUE;
decoder.builder.no_recurse =
(FT_Bool)( load_flags & FT_LOAD_NO_RECURSE );
/* now load the unscaled outline */
error = cff_get_glyph_data( face, glyph_index,
&charstring, &charstring_len );
if ( error )
goto Glyph_Build_Finished;
error = cff_decoder_prepare( &decoder, size, glyph_index );
if ( error )
goto Glyph_Build_Finished;
error = cff_decoder_parse_charstrings( &decoder,
charstring,
charstring_len );
cff_free_glyph_data( face, &charstring, charstring_len );
if ( error )
goto Glyph_Build_Finished;
/* Control data and length may not be available for incremental */
/* fonts. */
if ( face->root.internal->incremental_interface )
{
glyph->root.control_data = 0;
glyph->root.control_len = 0;
}
else
/* We set control_data and control_len if charstrings is loaded. */
/* See how charstring loads at cff_index_access_element() in */
/* cffload.c. */
{
CFF_Index csindex = &cff->charstrings_index;
if ( csindex->offsets )
{
glyph->root.control_data = csindex->bytes +
csindex->offsets[glyph_index] - 1;
glyph->root.control_len = charstring_len;
}
}
Glyph_Build_Finished:
/* save new glyph tables, if no error */
if ( !error )
cff_builder_done( &decoder.builder );
/* XXX: anything to do for broken glyph entry? */
}
/* Incremental fonts can optionally override the metrics. */
if ( !error &&
face->root.internal->incremental_interface &&
face->root.internal->incremental_interface->funcs->get_glyph_metrics )
{
FT_Incremental_MetricsRec metrics;
metrics.bearing_x = decoder.builder.left_bearing.x;
metrics.bearing_y = 0;
metrics.advance = decoder.builder.advance.x;
metrics.advance_v = decoder.builder.advance.y;
error = face->root.internal->incremental_interface->funcs->get_glyph_metrics(
face->root.internal->incremental_interface->object,
glyph_index, FALSE, &metrics );
decoder.builder.left_bearing.x = metrics.bearing_x;
decoder.builder.advance.x = metrics.advance;
decoder.builder.advance.y = metrics.advance_v;
}
if ( !error )
{
/* Now, set the metrics -- this is rather simple, as */
/* the left side bearing is the xMin, and the top side */
/* bearing the yMax. */
/* For composite glyphs, return only left side bearing and */
/* advance width. */
if ( load_flags & FT_LOAD_NO_RECURSE )
{
FT_Slot_Internal internal = glyph->root.internal;
glyph->root.metrics.horiBearingX = decoder.builder.left_bearing.x;
glyph->root.metrics.horiAdvance = decoder.glyph_width;
internal->glyph_matrix = font_matrix;
internal->glyph_delta = font_offset;
internal->glyph_transformed = 1;
}
else
{
FT_BBox cbox;
FT_Glyph_Metrics* metrics = &glyph->root.metrics;
FT_Vector advance;
FT_Bool has_vertical_info;
/* copy the _unscaled_ advance width */
metrics->horiAdvance = decoder.glyph_width;
glyph->root.linearHoriAdvance = decoder.glyph_width;
glyph->root.internal->glyph_transformed = 0;
has_vertical_info = FT_BOOL( face->vertical_info &&
face->vertical.number_Of_VMetrics > 0 );
/* get the vertical metrics from the vtmx table if we have one */
if ( has_vertical_info )
{
FT_Short vertBearingY = 0;
FT_UShort vertAdvance = 0;
( (SFNT_Service)face->sfnt )->get_metrics( face, 1,
glyph_index,
&vertBearingY,
&vertAdvance );
metrics->vertBearingY = vertBearingY;
metrics->vertAdvance = vertAdvance;
}
else
{
/* make up vertical ones */
if ( face->os2.version != 0xFFFFU )
metrics->vertAdvance = (FT_Pos)( face->os2.sTypoAscender -
face->os2.sTypoDescender );
else
metrics->vertAdvance = (FT_Pos)( face->horizontal.Ascender -
face->horizontal.Descender );
}
glyph->root.linearVertAdvance = metrics->vertAdvance;
glyph->root.format = FT_GLYPH_FORMAT_OUTLINE;
glyph->root.outline.flags = 0;
if ( size && size->root.metrics.y_ppem < 24 )
glyph->root.outline.flags |= FT_OUTLINE_HIGH_PRECISION;
glyph->root.outline.flags |= FT_OUTLINE_REVERSE_FILL;
if ( !( font_matrix.xx == 0x10000L &&
font_matrix.yy == 0x10000L &&
font_matrix.xy == 0 &&
font_matrix.yx == 0 ) )
FT_Outline_Transform( &glyph->root.outline, &font_matrix );
if ( !( font_offset.x == 0 &&
font_offset.y == 0 ) )
FT_Outline_Translate( &glyph->root.outline,
font_offset.x, font_offset.y );
advance.x = metrics->horiAdvance;
advance.y = 0;
FT_Vector_Transform( &advance, &font_matrix );
metrics->horiAdvance = advance.x + font_offset.x;
advance.x = 0;
advance.y = metrics->vertAdvance;
FT_Vector_Transform( &advance, &font_matrix );
metrics->vertAdvance = advance.y + font_offset.y;
if ( ( load_flags & FT_LOAD_NO_SCALE ) == 0 || force_scaling )
{
/* scale the outline and the metrics */
FT_Int n;
FT_Outline* cur = &glyph->root.outline;
FT_Vector* vec = cur->points;
FT_Fixed x_scale = glyph->x_scale;
FT_Fixed y_scale = glyph->y_scale;
/* First of all, scale the points */
if ( !hinting || !decoder.builder.hints_funcs )
for ( n = cur->n_points; n > 0; n--, vec++ )
{
vec->x = FT_MulFix( vec->x, x_scale );
vec->y = FT_MulFix( vec->y, y_scale );
}
/* Then scale the metrics */
metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale );
metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, y_scale );
}
/* compute the other metrics */
FT_Outline_Get_CBox( &glyph->root.outline, &cbox );
metrics->width = cbox.xMax - cbox.xMin;
metrics->height = cbox.yMax - cbox.yMin;
metrics->horiBearingX = cbox.xMin;
metrics->horiBearingY = cbox.yMax;
if ( has_vertical_info )
metrics->vertBearingX = metrics->horiBearingX -
metrics->horiAdvance / 2;
else
{
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
ft_synthesize_vertical_metrics( metrics,
metrics->vertAdvance );
}
}
}
return error;
}
/* END */
/***************************************************************************/
/* */
/* cffcmap.c */
/* */
/* CFF character mapping table (cmap) support (body). */
/* */
/* Copyright 2002, 2003, 2004, 2005, 2006, 2007, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** CFF STANDARD (AND EXPERT) ENCODING CMAPS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_CALLBACK_DEF( FT_Error )
cff_cmap_encoding_init( CFF_CMapStd cmap )
{
TT_Face face = (TT_Face)FT_CMAP_FACE( cmap );
CFF_Font cff = (CFF_Font)face->extra.data;
CFF_Encoding encoding = &cff->encoding;
cmap->gids = encoding->codes;
return 0;
}
FT_CALLBACK_DEF( void )
cff_cmap_encoding_done( CFF_CMapStd cmap )
{
cmap->gids = NULL;
}
FT_CALLBACK_DEF( FT_UInt )
cff_cmap_encoding_char_index( CFF_CMapStd cmap,
FT_UInt32 char_code )
{
FT_UInt result = 0;
if ( char_code < 256 )
result = cmap->gids[char_code];
return result;
}
FT_CALLBACK_DEF( FT_UInt32 )
cff_cmap_encoding_char_next( CFF_CMapStd cmap,
FT_UInt32 *pchar_code )
{
FT_UInt result = 0;
FT_UInt32 char_code = *pchar_code;
*pchar_code = 0;
if ( char_code < 255 )
{
FT_UInt code = (FT_UInt)(char_code + 1);
for (;;)
{
if ( code >= 256 )
break;
result = cmap->gids[code];
if ( result != 0 )
{
*pchar_code = code;
break;
}
code++;
}
}
return result;
}
FT_DEFINE_CMAP_CLASS(cff_cmap_encoding_class_rec,
sizeof ( CFF_CMapStdRec ),
(FT_CMap_InitFunc) cff_cmap_encoding_init,
(FT_CMap_DoneFunc) cff_cmap_encoding_done,
(FT_CMap_CharIndexFunc)cff_cmap_encoding_char_index,
(FT_CMap_CharNextFunc) cff_cmap_encoding_char_next,
NULL, NULL, NULL, NULL, NULL
)
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** CFF SYNTHETIC UNICODE ENCODING CMAP *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_CALLBACK_DEF( const char* )
cff_sid_to_glyph_name( TT_Face face,
FT_UInt idx )
{
CFF_Font cff = (CFF_Font)face->extra.data;
CFF_Charset charset = &cff->charset;
FT_UInt sid = charset->sids[idx];
return cff_index_get_sid_string( cff, sid );
}
FT_CALLBACK_DEF( FT_Error )
cff_cmap_unicode_init( PS_Unicodes unicodes )
{
TT_Face face = (TT_Face)FT_CMAP_FACE( unicodes );
FT_Memory memory = FT_FACE_MEMORY( face );
CFF_Font cff = (CFF_Font)face->extra.data;
CFF_Charset charset = &cff->charset;
FT_Service_PsCMaps psnames = (FT_Service_PsCMaps)cff->psnames;
/* can't build Unicode map for CID-keyed font */
/* because we don't know glyph names. */
if ( !charset->sids )
return CFF_Err_No_Unicode_Glyph_Name;
return psnames->unicodes_init( memory,
unicodes,
cff->num_glyphs,
(PS_GetGlyphNameFunc)&cff_sid_to_glyph_name,
(PS_FreeGlyphNameFunc)NULL,
(FT_Pointer)face );
}
FT_CALLBACK_DEF( void )
cff_cmap_unicode_done( PS_Unicodes unicodes )
{
FT_Face face = FT_CMAP_FACE( unicodes );
FT_Memory memory = FT_FACE_MEMORY( face );
FT_FREE( unicodes->maps );
unicodes->num_maps = 0;
}
FT_CALLBACK_DEF( FT_UInt )
cff_cmap_unicode_char_index( PS_Unicodes unicodes,
FT_UInt32 char_code )
{
TT_Face face = (TT_Face)FT_CMAP_FACE( unicodes );
CFF_Font cff = (CFF_Font)face->extra.data;
FT_Service_PsCMaps psnames = (FT_Service_PsCMaps)cff->psnames;
return psnames->unicodes_char_index( unicodes, char_code );
}
FT_CALLBACK_DEF( FT_UInt32 )
cff_cmap_unicode_char_next( PS_Unicodes unicodes,
FT_UInt32 *pchar_code )
{
TT_Face face = (TT_Face)FT_CMAP_FACE( unicodes );
CFF_Font cff = (CFF_Font)face->extra.data;
FT_Service_PsCMaps psnames = (FT_Service_PsCMaps)cff->psnames;
return psnames->unicodes_char_next( unicodes, pchar_code );
}
FT_DEFINE_CMAP_CLASS(cff_cmap_unicode_class_rec,
sizeof ( PS_UnicodesRec ),
(FT_CMap_InitFunc) cff_cmap_unicode_init,
(FT_CMap_DoneFunc) cff_cmap_unicode_done,
(FT_CMap_CharIndexFunc)cff_cmap_unicode_char_index,
(FT_CMap_CharNextFunc) cff_cmap_unicode_char_next,
NULL, NULL, NULL, NULL, NULL
)
/* END */
/* END */
/***************************************************************************/
/* */
/* sfnt.c */
/* */
/* Single object library component. */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* sfntpic.c */
/* */
/* The FreeType position independent code services for sfnt module. */
/* */
/* Copyright 2009, 2010, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* sfntpic.h */
/* */
/* The FreeType position independent code services for sfnt module. */
/* */
/* Copyright 2009, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SFNTPIC_H__
FT_BEGIN_HEADER
#define SFNT_SERVICES_GET sfnt_services
#define SFNT_SERVICE_GLYPH_DICT_GET sfnt_service_glyph_dict
#define SFNT_SERVICE_PS_NAME_GET sfnt_service_ps_name
#define TT_SERVICE_CMAP_INFO_GET tt_service_get_cmap_info
#define SFNT_SERVICES_GET sfnt_services
#define TT_CMAP_CLASSES_GET tt_cmap_classes
#define SFNT_SERVICE_SFNT_TABLE_GET sfnt_service_sfnt_table
#define SFNT_SERVICE_BDF_GET sfnt_service_bdf
#define SFNT_INTERFACE_GET sfnt_interface
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* sferrors.h */
/* */
/* SFNT error codes (specification only). */
/* */
/* Copyright 2001, 2004, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the SFNT error enumeration constants. */
/* */
/*************************************************************************/
#define __SFERRORS_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX SFNT_Err_
#define FT_ERR_BASE FT_Mod_Err_SFNT
#define FT_KEEP_ERR_PREFIX
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/* END */
/***************************************************************************/
/* */
/* ttload.c */
/* */
/* Load the basic TrueType tables, i.e., tables that can be either in */
/* TTF or OTF fonts (body). */
/* */
/* Copyright 1996-2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ttload.h */
/* */
/* Load the basic TrueType tables, i.e., tables that can be either in */
/* TTF or OTF fonts (specification). */
/* */
/* Copyright 1996-2001, 2002, 2005, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTLOAD_H__
FT_BEGIN_HEADER
FT_LOCAL( TT_Table )
tt_face_lookup_table( TT_Face face,
FT_ULong tag );
FT_LOCAL( FT_Error )
tt_face_goto_table( TT_Face face,
FT_ULong tag,
FT_Stream stream,
FT_ULong* length );
FT_LOCAL( FT_Error )
tt_face_load_font_dir( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_any( TT_Face face,
FT_ULong tag,
FT_Long offset,
FT_Byte* buffer,
FT_ULong* length );
FT_LOCAL( FT_Error )
tt_face_load_head( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_cmap( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_maxp( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_name( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_os2( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_post( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_pclt( TT_Face face,
FT_Stream stream );
FT_LOCAL( void )
tt_face_free_name( TT_Face face );
FT_LOCAL( FT_Error )
tt_face_load_gasp( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_bhed( TT_Face face,
FT_Stream stream );
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttload
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_lookup_table */
/* */
/* <Description> */
/* Looks for a TrueType table by name. */
/* */
/* <Input> */
/* face :: A face object handle. */
/* */
/* tag :: The searched tag. */
/* */
/* <Return> */
/* A pointer to the table directory entry. 0 if not found. */
/* */
FT_LOCAL_DEF( TT_Table )
tt_face_lookup_table( TT_Face face,
FT_ULong tag )
{
TT_Table entry;
TT_Table limit;
FT_TRACE4(( "tt_face_lookup_table: %08p, `%c%c%c%c' -- ",
face,
(FT_Char)( tag >> 24 ),
(FT_Char)( tag >> 16 ),
(FT_Char)( tag >> 8 ),
(FT_Char)( tag ) ));
entry = face->dir_tables;
limit = entry + face->num_tables;
for ( ; entry < limit; entry++ )
{
/* For compatibility with Windows, we consider */
/* zero-length tables the same as missing tables. */
if ( entry->Tag == tag )
{
if ( entry->Length != 0 )
{
FT_TRACE4(( "found table.\n" ));
return entry;
}
}
}
return NULL;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_goto_table */
/* */
/* <Description> */
/* Looks for a TrueType table by name, then seek a stream to it. */
/* */
/* <Input> */
/* face :: A face object handle. */
/* */
/* tag :: The searched tag. */
/* */
/* stream :: The stream to seek when the table is found. */
/* */
/* <Output> */
/* length :: The length of the table if found, undefined otherwise. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_goto_table( TT_Face face,
FT_ULong tag,
FT_Stream stream,
FT_ULong* length )
{
TT_Table table;
FT_Error error;
table = tt_face_lookup_table( face, tag );
if ( table )
{
if ( length )
*length = table->Length;
if ( FT_STREAM_SEEK( table->Offset ) )
goto Exit;
}
else
error = SFNT_Err_Table_Missing;
Exit:
return error;
}
/* Here, we */
/* */
/* - check that `num_tables' is valid (and adjust it if necessary) */
/* */
/* - look for a `head' table, check its size, and parse it to check */
/* whether its `magic' field is correctly set */
/* */
/* - errors (except errors returned by stream handling) */
/* */
/* SFNT_Err_Unknown_File_Format: */
/* no table is defined in directory, it is not sfnt-wrapped */
/* data */
/* SFNT_Err_Table_Missing: */
/* table directory is valid, but essential tables */
/* (head/bhed/SING) are missing */
/* */
static FT_Error
check_table_dir( SFNT_Header sfnt,
FT_Stream stream )
{
FT_Error error;
FT_UShort nn, valid_entries = 0;
FT_UInt has_head = 0, has_sing = 0, has_meta = 0;
FT_ULong offset = sfnt->offset + 12;
static const FT_Frame_Field table_dir_entry_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TT_TableRec
FT_FRAME_START( 16 ),
FT_FRAME_ULONG( Tag ),
FT_FRAME_ULONG( CheckSum ),
FT_FRAME_ULONG( Offset ),
FT_FRAME_ULONG( Length ),
FT_FRAME_END
};
if ( FT_STREAM_SEEK( offset ) )
goto Exit;
for ( nn = 0; nn < sfnt->num_tables; nn++ )
{
TT_TableRec table;
if ( FT_STREAM_READ_FIELDS( table_dir_entry_fields, &table ) )
{
nn--;
FT_TRACE2(( "check_table_dir:"
" can read only %d table%s in font (instead of %d)\n",
nn, nn == 1 ? "" : "s", sfnt->num_tables ));
sfnt->num_tables = nn;
break;
}
/* we ignore invalid tables */
if ( table.Offset + table.Length > stream->size )
{
FT_TRACE2(( "check_table_dir: table entry %d invalid\n", nn ));
continue;
}
else
valid_entries++;
if ( table.Tag == TTAG_head || table.Tag == TTAG_bhed )
{
FT_UInt32 magic;
has_head = 1;
/*
* The table length should be 0x36, but certain font tools make it
* 0x38, so we will just check that it is greater.
*
* Note that according to the specification, the table must be
* padded to 32-bit lengths, but this doesn't apply to the value of
* its `Length' field!
*
*/
if ( table.Length < 0x36 )
{
FT_TRACE2(( "check_table_dir: `head' table too small\n" ));
error = SFNT_Err_Table_Missing;
goto Exit;
}
if ( FT_STREAM_SEEK( table.Offset + 12 ) ||
FT_READ_ULONG( magic ) )
goto Exit;
if ( magic != 0x5F0F3CF5UL )
{
FT_TRACE2(( "check_table_dir:"
" no magic number found in `head' table\n"));
error = SFNT_Err_Table_Missing;
goto Exit;
}
if ( FT_STREAM_SEEK( offset + ( nn + 1 ) * 16 ) )
goto Exit;
}
else if ( table.Tag == TTAG_SING )
has_sing = 1;
else if ( table.Tag == TTAG_META )
has_meta = 1;
}
sfnt->num_tables = valid_entries;
if ( sfnt->num_tables == 0 )
{
FT_TRACE2(( "check_table_dir: no tables found\n" ));
error = SFNT_Err_Unknown_File_Format;
goto Exit;
}
/* if `sing' and `meta' tables are present, there is no `head' table */
if ( has_head || ( has_sing && has_meta ) )
{
error = SFNT_Err_Ok;
goto Exit;
}
else
{
FT_TRACE2(( "check_table_dir:" ));
FT_TRACE2(( " neither `head', `bhed', nor `sing' table found\n" ));
error = SFNT_Err_Table_Missing;
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_font_dir */
/* */
/* <Description> */
/* Loads the header of a SFNT font file. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* <Output> */
/* sfnt :: The SFNT header. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* The stream cursor must be at the beginning of the font directory. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_font_dir( TT_Face face,
FT_Stream stream )
{
SFNT_HeaderRec sfnt;
FT_Error error;
FT_Memory memory = stream->memory;
TT_TableRec* entry;
FT_Int nn;
static const FT_Frame_Field offset_table_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE SFNT_HeaderRec
FT_FRAME_START( 8 ),
FT_FRAME_USHORT( num_tables ),
FT_FRAME_USHORT( search_range ),
FT_FRAME_USHORT( entry_selector ),
FT_FRAME_USHORT( range_shift ),
FT_FRAME_END
};
FT_TRACE2(( "tt_face_load_font_dir: %08p\n", face ));
/* read the offset table */
sfnt.offset = FT_STREAM_POS();
if ( FT_READ_ULONG( sfnt.format_tag ) ||
FT_STREAM_READ_FIELDS( offset_table_fields, &sfnt ) )
goto Exit;
/* many fonts don't have these fields set correctly */
#if 0
if ( sfnt.search_range != 1 << ( sfnt.entry_selector + 4 ) ||
sfnt.search_range + sfnt.range_shift != sfnt.num_tables << 4 )
return SFNT_Err_Unknown_File_Format;
#endif
/* load the table directory */
FT_TRACE2(( "-- Number of tables: %10u\n", sfnt.num_tables ));
FT_TRACE2(( "-- Format version: 0x%08lx\n", sfnt.format_tag ));
if ( sfnt.format_tag != TTAG_OTTO )
{
/* check first */
error = check_table_dir( &sfnt, stream );
if ( error )
{
FT_TRACE2(( "tt_face_load_font_dir:"
" invalid table directory for TrueType\n" ));
goto Exit;
}
}
face->num_tables = sfnt.num_tables;
face->format_tag = sfnt.format_tag;
if ( FT_QNEW_ARRAY( face->dir_tables, face->num_tables ) )
goto Exit;
if ( FT_STREAM_SEEK( sfnt.offset + 12 ) ||
FT_FRAME_ENTER( face->num_tables * 16L ) )
goto Exit;
entry = face->dir_tables;
FT_TRACE2(( "\n"
" tag offset length checksum\n"
" ----------------------------------\n" ));
for ( nn = 0; nn < sfnt.num_tables; nn++ )
{
entry->Tag = FT_GET_TAG4();
entry->CheckSum = FT_GET_ULONG();
entry->Offset = FT_GET_LONG();
entry->Length = FT_GET_LONG();
/* ignore invalid tables */
if ( entry->Offset + entry->Length > stream->size )
continue;
else
{
FT_TRACE2(( " %c%c%c%c %08lx %08lx %08lx\n",
(FT_Char)( entry->Tag >> 24 ),
(FT_Char)( entry->Tag >> 16 ),
(FT_Char)( entry->Tag >> 8 ),
(FT_Char)( entry->Tag ),
entry->Offset,
entry->Length,
entry->CheckSum ));
entry++;
}
}
FT_FRAME_EXIT();
FT_TRACE2(( "table directory loaded\n\n" ));
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_any */
/* */
/* <Description> */
/* Loads any font table into client memory. */
/* */
/* <Input> */
/* face :: The face object to look for. */
/* */
/* tag :: The tag of table to load. Use the value 0 if you want */
/* to access the whole font file, else set this parameter */
/* to a valid TrueType table tag that you can forge with */
/* the MAKE_TT_TAG macro. */
/* */
/* offset :: The starting offset in the table (or the file if */
/* tag == 0). */
/* */
/* length :: The address of the decision variable: */
/* */
/* If length == NULL: */
/* Loads the whole table. Returns an error if */
/* `offset' == 0! */
/* */
/* If *length == 0: */
/* Exits immediately; returning the length of the given */
/* table or of the font file, depending on the value of */
/* `tag'. */
/* */
/* If *length != 0: */
/* Loads the next `length' bytes of table or font, */
/* starting at offset `offset' (in table or font too). */
/* */
/* <Output> */
/* buffer :: The address of target buffer. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_any( TT_Face face,
FT_ULong tag,
FT_Long offset,
FT_Byte* buffer,
FT_ULong* length )
{
FT_Error error;
FT_Stream stream;
TT_Table table;
FT_ULong size;
if ( tag != 0 )
{
/* look for tag in font directory */
table = tt_face_lookup_table( face, tag );
if ( !table )
{
error = SFNT_Err_Table_Missing;
goto Exit;
}
offset += table->Offset;
size = table->Length;
}
else
/* tag == 0 -- the user wants to access the font file directly */
size = face->root.stream->size;
if ( length && *length == 0 )
{
*length = size;
return SFNT_Err_Ok;
}
if ( length )
size = *length;
stream = face->root.stream;
/* the `if' is syntactic sugar for picky compilers */
if ( FT_STREAM_READ_AT( offset, buffer, size ) )
goto Exit;
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_generic_header */
/* */
/* <Description> */
/* Loads the TrueType table `head' or `bhed'. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
static FT_Error
tt_face_load_generic_header( TT_Face face,
FT_Stream stream,
FT_ULong tag )
{
FT_Error error;
TT_Header* header;
static const FT_Frame_Field header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TT_Header
FT_FRAME_START( 54 ),
FT_FRAME_ULONG ( Table_Version ),
FT_FRAME_ULONG ( Font_Revision ),
FT_FRAME_LONG ( CheckSum_Adjust ),
FT_FRAME_LONG ( Magic_Number ),
FT_FRAME_USHORT( Flags ),
FT_FRAME_USHORT( Units_Per_EM ),
FT_FRAME_LONG ( Created[0] ),
FT_FRAME_LONG ( Created[1] ),
FT_FRAME_LONG ( Modified[0] ),
FT_FRAME_LONG ( Modified[1] ),
FT_FRAME_SHORT ( xMin ),
FT_FRAME_SHORT ( yMin ),
FT_FRAME_SHORT ( xMax ),
FT_FRAME_SHORT ( yMax ),
FT_FRAME_USHORT( Mac_Style ),
FT_FRAME_USHORT( Lowest_Rec_PPEM ),
FT_FRAME_SHORT ( Font_Direction ),
FT_FRAME_SHORT ( Index_To_Loc_Format ),
FT_FRAME_SHORT ( Glyph_Data_Format ),
FT_FRAME_END
};
error = face->goto_table( face, tag, stream, 0 );
if ( error )
goto Exit;
header = &face->header;
if ( FT_STREAM_READ_FIELDS( header_fields, header ) )
goto Exit;
FT_TRACE3(( "Units per EM: %4u\n", header->Units_Per_EM ));
FT_TRACE3(( "IndexToLoc: %4d\n", header->Index_To_Loc_Format ));
Exit:
return error;
}
FT_LOCAL_DEF( FT_Error )
tt_face_load_head( TT_Face face,
FT_Stream stream )
{
return tt_face_load_generic_header( face, stream, TTAG_head );
}
FT_LOCAL_DEF( FT_Error )
tt_face_load_bhed( TT_Face face,
FT_Stream stream )
{
return tt_face_load_generic_header( face, stream, TTAG_bhed );
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_max_profile */
/* */
/* <Description> */
/* Loads the maximum profile into a face object. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_maxp( TT_Face face,
FT_Stream stream )
{
FT_Error error;
TT_MaxProfile* maxProfile = &face->max_profile;
static const FT_Frame_Field maxp_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TT_MaxProfile
FT_FRAME_START( 6 ),
FT_FRAME_LONG ( version ),
FT_FRAME_USHORT( numGlyphs ),
FT_FRAME_END
};
static const FT_Frame_Field maxp_fields_extra[] =
{
FT_FRAME_START( 26 ),
FT_FRAME_USHORT( maxPoints ),
FT_FRAME_USHORT( maxContours ),
FT_FRAME_USHORT( maxCompositePoints ),
FT_FRAME_USHORT( maxCompositeContours ),
FT_FRAME_USHORT( maxZones ),
FT_FRAME_USHORT( maxTwilightPoints ),
FT_FRAME_USHORT( maxStorage ),
FT_FRAME_USHORT( maxFunctionDefs ),
FT_FRAME_USHORT( maxInstructionDefs ),
FT_FRAME_USHORT( maxStackElements ),
FT_FRAME_USHORT( maxSizeOfInstructions ),
FT_FRAME_USHORT( maxComponentElements ),
FT_FRAME_USHORT( maxComponentDepth ),
FT_FRAME_END
};
error = face->goto_table( face, TTAG_maxp, stream, 0 );
if ( error )
goto Exit;
if ( FT_STREAM_READ_FIELDS( maxp_fields, maxProfile ) )
goto Exit;
maxProfile->maxPoints = 0;
maxProfile->maxContours = 0;
maxProfile->maxCompositePoints = 0;
maxProfile->maxCompositeContours = 0;
maxProfile->maxZones = 0;
maxProfile->maxTwilightPoints = 0;
maxProfile->maxStorage = 0;
maxProfile->maxFunctionDefs = 0;
maxProfile->maxInstructionDefs = 0;
maxProfile->maxStackElements = 0;
maxProfile->maxSizeOfInstructions = 0;
maxProfile->maxComponentElements = 0;
maxProfile->maxComponentDepth = 0;
if ( maxProfile->version >= 0x10000L )
{
if ( FT_STREAM_READ_FIELDS( maxp_fields_extra, maxProfile ) )
goto Exit;
/* XXX: an adjustment that is necessary to load certain */
/* broken fonts like `Keystrokes MT' :-( */
/* */
/* We allocate 64 function entries by default when */
/* the maxFunctionDefs value is smaller. */
if ( maxProfile->maxFunctionDefs < 64 )
maxProfile->maxFunctionDefs = 64;
/* we add 4 phantom points later */
if ( maxProfile->maxTwilightPoints > ( 0xFFFFU - 4 ) )
{
FT_TRACE0(( "tt_face_load_maxp:"
" too much twilight points in `maxp' table;\n"
" "
" some glyphs might be rendered incorrectly\n" ));
maxProfile->maxTwilightPoints = 0xFFFFU - 4;
}
/* we arbitrarily limit recursion to avoid stack exhaustion */
if ( maxProfile->maxComponentDepth > 100 )
{
FT_TRACE0(( "tt_face_load_maxp:"
" abnormally large component depth (%d) set to 100\n",
maxProfile->maxComponentDepth ));
maxProfile->maxComponentDepth = 100;
}
}
FT_TRACE3(( "numGlyphs: %u\n", maxProfile->numGlyphs ));
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_name */
/* */
/* <Description> */
/* Loads the name records. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_name( TT_Face face,
FT_Stream stream )
{
FT_Error error;
FT_Memory memory = stream->memory;
FT_ULong table_pos, table_len;
FT_ULong storage_start, storage_limit;
FT_UInt count;
TT_NameTable table;
static const FT_Frame_Field name_table_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TT_NameTableRec
FT_FRAME_START( 6 ),
FT_FRAME_USHORT( format ),
FT_FRAME_USHORT( numNameRecords ),
FT_FRAME_USHORT( storageOffset ),
FT_FRAME_END
};
static const FT_Frame_Field name_record_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TT_NameEntryRec
/* no FT_FRAME_START */
FT_FRAME_USHORT( platformID ),
FT_FRAME_USHORT( encodingID ),
FT_FRAME_USHORT( languageID ),
FT_FRAME_USHORT( nameID ),
FT_FRAME_USHORT( stringLength ),
FT_FRAME_USHORT( stringOffset ),
FT_FRAME_END
};
table = &face->name_table;
table->stream = stream;
error = face->goto_table( face, TTAG_name, stream, &table_len );
if ( error )
goto Exit;
table_pos = FT_STREAM_POS();
if ( FT_STREAM_READ_FIELDS( name_table_fields, table ) )
goto Exit;
/* Some popular Asian fonts have an invalid `storageOffset' value */
/* (it should be at least "6 + 12*num_names"). However, the string */
/* offsets, computed as "storageOffset + entry->stringOffset", are */
/* valid pointers within the name table... */
/* */
/* We thus can't check `storageOffset' right now. */
/* */
storage_start = table_pos + 6 + 12*table->numNameRecords;
storage_limit = table_pos + table_len;
if ( storage_start > storage_limit )
{
FT_ERROR(( "tt_face_load_name: invalid `name' table\n" ));
error = SFNT_Err_Name_Table_Missing;
goto Exit;
}
/* Allocate the array of name records. */
count = table->numNameRecords;
table->numNameRecords = 0;
if ( FT_NEW_ARRAY( table->names, count ) ||
FT_FRAME_ENTER( count * 12 ) )
goto Exit;
/* Load the name records and determine how much storage is needed */
/* to hold the strings themselves. */
{
TT_NameEntryRec* entry = table->names;
for ( ; count > 0; count-- )
{
if ( FT_STREAM_READ_FIELDS( name_record_fields, entry ) )
continue;
/* check that the name is not empty */
if ( entry->stringLength == 0 )
continue;
/* check that the name string is within the table */
entry->stringOffset += table_pos + table->storageOffset;
if ( entry->stringOffset < storage_start ||
entry->stringOffset + entry->stringLength > storage_limit )
{
/* invalid entry - ignore it */
entry->stringOffset = 0;
entry->stringLength = 0;
continue;
}
entry++;
}
table->numNameRecords = (FT_UInt)( entry - table->names );
}
FT_FRAME_EXIT();
/* everything went well, update face->num_names */
face->num_names = (FT_UShort) table->numNameRecords;
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_free_names */
/* */
/* <Description> */
/* Frees the name records. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
FT_LOCAL_DEF( void )
tt_face_free_name( TT_Face face )
{
FT_Memory memory = face->root.driver->root.memory;
TT_NameTable table = &face->name_table;
TT_NameEntry entry = table->names;
FT_UInt count = table->numNameRecords;
if ( table->names )
{
for ( ; count > 0; count--, entry++ )
{
FT_FREE( entry->string );
entry->stringLength = 0;
}
/* free strings table */
FT_FREE( table->names );
}
table->numNameRecords = 0;
table->format = 0;
table->storageOffset = 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_cmap */
/* */
/* <Description> */
/* Loads the cmap directory in a face object. The cmaps themselves */
/* are loaded on demand in the `ttcmap.c' module. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: A handle to the input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_cmap( TT_Face face,
FT_Stream stream )
{
FT_Error error;
error = face->goto_table( face, TTAG_cmap, stream, &face->cmap_size );
if ( error )
goto Exit;
if ( FT_FRAME_EXTRACT( face->cmap_size, face->cmap_table ) )
face->cmap_size = 0;
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_os2 */
/* */
/* <Description> */
/* Loads the OS2 table. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: A handle to the input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_os2( TT_Face face,
FT_Stream stream )
{
FT_Error error;
TT_OS2* os2;
static const FT_Frame_Field os2_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TT_OS2
FT_FRAME_START( 78 ),
FT_FRAME_USHORT( version ),
FT_FRAME_SHORT ( xAvgCharWidth ),
FT_FRAME_USHORT( usWeightClass ),
FT_FRAME_USHORT( usWidthClass ),
FT_FRAME_SHORT ( fsType ),
FT_FRAME_SHORT ( ySubscriptXSize ),
FT_FRAME_SHORT ( ySubscriptYSize ),
FT_FRAME_SHORT ( ySubscriptXOffset ),
FT_FRAME_SHORT ( ySubscriptYOffset ),
FT_FRAME_SHORT ( ySuperscriptXSize ),
FT_FRAME_SHORT ( ySuperscriptYSize ),
FT_FRAME_SHORT ( ySuperscriptXOffset ),
FT_FRAME_SHORT ( ySuperscriptYOffset ),
FT_FRAME_SHORT ( yStrikeoutSize ),
FT_FRAME_SHORT ( yStrikeoutPosition ),
FT_FRAME_SHORT ( sFamilyClass ),
FT_FRAME_BYTE ( panose[0] ),
FT_FRAME_BYTE ( panose[1] ),
FT_FRAME_BYTE ( panose[2] ),
FT_FRAME_BYTE ( panose[3] ),
FT_FRAME_BYTE ( panose[4] ),
FT_FRAME_BYTE ( panose[5] ),
FT_FRAME_BYTE ( panose[6] ),
FT_FRAME_BYTE ( panose[7] ),
FT_FRAME_BYTE ( panose[8] ),
FT_FRAME_BYTE ( panose[9] ),
FT_FRAME_ULONG ( ulUnicodeRange1 ),
FT_FRAME_ULONG ( ulUnicodeRange2 ),
FT_FRAME_ULONG ( ulUnicodeRange3 ),
FT_FRAME_ULONG ( ulUnicodeRange4 ),
FT_FRAME_BYTE ( achVendID[0] ),
FT_FRAME_BYTE ( achVendID[1] ),
FT_FRAME_BYTE ( achVendID[2] ),
FT_FRAME_BYTE ( achVendID[3] ),
FT_FRAME_USHORT( fsSelection ),
FT_FRAME_USHORT( usFirstCharIndex ),
FT_FRAME_USHORT( usLastCharIndex ),
FT_FRAME_SHORT ( sTypoAscender ),
FT_FRAME_SHORT ( sTypoDescender ),
FT_FRAME_SHORT ( sTypoLineGap ),
FT_FRAME_USHORT( usWinAscent ),
FT_FRAME_USHORT( usWinDescent ),
FT_FRAME_END
};
static const FT_Frame_Field os2_fields_extra[] =
{
FT_FRAME_START( 8 ),
FT_FRAME_ULONG( ulCodePageRange1 ),
FT_FRAME_ULONG( ulCodePageRange2 ),
FT_FRAME_END
};
static const FT_Frame_Field os2_fields_extra2[] =
{
FT_FRAME_START( 10 ),
FT_FRAME_SHORT ( sxHeight ),
FT_FRAME_SHORT ( sCapHeight ),
FT_FRAME_USHORT( usDefaultChar ),
FT_FRAME_USHORT( usBreakChar ),
FT_FRAME_USHORT( usMaxContext ),
FT_FRAME_END
};
/* We now support old Mac fonts where the OS/2 table doesn't */
/* exist. Simply put, we set the `version' field to 0xFFFF */
/* and test this value each time we need to access the table. */
error = face->goto_table( face, TTAG_OS2, stream, 0 );
if ( error )
goto Exit;
os2 = &face->os2;
if ( FT_STREAM_READ_FIELDS( os2_fields, os2 ) )
goto Exit;
os2->ulCodePageRange1 = 0;
os2->ulCodePageRange2 = 0;
os2->sxHeight = 0;
os2->sCapHeight = 0;
os2->usDefaultChar = 0;
os2->usBreakChar = 0;
os2->usMaxContext = 0;
if ( os2->version >= 0x0001 )
{
/* only version 1 tables */
if ( FT_STREAM_READ_FIELDS( os2_fields_extra, os2 ) )
goto Exit;
if ( os2->version >= 0x0002 )
{
/* only version 2 tables */
if ( FT_STREAM_READ_FIELDS( os2_fields_extra2, os2 ) )
goto Exit;
}
}
FT_TRACE3(( "sTypoAscender: %4d\n", os2->sTypoAscender ));
FT_TRACE3(( "sTypoDescender: %4d\n", os2->sTypoDescender ));
FT_TRACE3(( "usWinAscent: %4u\n", os2->usWinAscent ));
FT_TRACE3(( "usWinDescent: %4u\n", os2->usWinDescent ));
FT_TRACE3(( "fsSelection: 0x%2x\n", os2->fsSelection ));
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_postscript */
/* */
/* <Description> */
/* Loads the Postscript table. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: A handle to the input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_post( TT_Face face,
FT_Stream stream )
{
FT_Error error;
TT_Postscript* post = &face->postscript;
static const FT_Frame_Field post_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TT_Postscript
FT_FRAME_START( 32 ),
FT_FRAME_ULONG( FormatType ),
FT_FRAME_ULONG( italicAngle ),
FT_FRAME_SHORT( underlinePosition ),
FT_FRAME_SHORT( underlineThickness ),
FT_FRAME_ULONG( isFixedPitch ),
FT_FRAME_ULONG( minMemType42 ),
FT_FRAME_ULONG( maxMemType42 ),
FT_FRAME_ULONG( minMemType1 ),
FT_FRAME_ULONG( maxMemType1 ),
FT_FRAME_END
};
error = face->goto_table( face, TTAG_post, stream, 0 );
if ( error )
return error;
if ( FT_STREAM_READ_FIELDS( post_fields, post ) )
return error;
/* we don't load the glyph names, we do that in another */
/* module (ttpost). */
FT_TRACE3(( "FormatType: 0x%x\n", post->FormatType ));
FT_TRACE3(( "isFixedPitch: %s\n", post->isFixedPitch
? " yes" : " no" ));
return SFNT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_pclt */
/* */
/* <Description> */
/* Loads the PCL 5 Table. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: A handle to the input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_pclt( TT_Face face,
FT_Stream stream )
{
static const FT_Frame_Field pclt_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TT_PCLT
FT_FRAME_START( 54 ),
FT_FRAME_ULONG ( Version ),
FT_FRAME_ULONG ( FontNumber ),
FT_FRAME_USHORT( Pitch ),
FT_FRAME_USHORT( xHeight ),
FT_FRAME_USHORT( Style ),
FT_FRAME_USHORT( TypeFamily ),
FT_FRAME_USHORT( CapHeight ),
FT_FRAME_BYTES ( TypeFace, 16 ),
FT_FRAME_BYTES ( CharacterComplement, 8 ),
FT_FRAME_BYTES ( FileName, 6 ),
FT_FRAME_CHAR ( StrokeWeight ),
FT_FRAME_CHAR ( WidthType ),
FT_FRAME_BYTE ( SerifStyle ),
FT_FRAME_BYTE ( Reserved ),
FT_FRAME_END
};
FT_Error error;
TT_PCLT* pclt = &face->pclt;
/* optional table */
error = face->goto_table( face, TTAG_PCLT, stream, 0 );
if ( error )
goto Exit;
if ( FT_STREAM_READ_FIELDS( pclt_fields, pclt ) )
goto Exit;
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_gasp */
/* */
/* <Description> */
/* Loads the `gasp' table into a face object. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_gasp( TT_Face face,
FT_Stream stream )
{
FT_Error error;
FT_Memory memory = stream->memory;
FT_UInt j,num_ranges;
TT_GaspRange gaspranges = NULL;
/* the gasp table is optional */
error = face->goto_table( face, TTAG_gasp, stream, 0 );
if ( error )
goto Exit;
if ( FT_FRAME_ENTER( 4L ) )
goto Exit;
face->gasp.version = FT_GET_USHORT();
face->gasp.numRanges = FT_GET_USHORT();
FT_FRAME_EXIT();
/* only support versions 0 and 1 of the table */
if ( face->gasp.version >= 2 )
{
face->gasp.numRanges = 0;
error = SFNT_Err_Invalid_Table;
goto Exit;
}
num_ranges = face->gasp.numRanges;
FT_TRACE3(( "numRanges: %u\n", num_ranges ));
if ( FT_QNEW_ARRAY( face->gasp.gaspRanges, num_ranges ) ||
FT_FRAME_ENTER( num_ranges * 4L ) )
goto Exit;
gaspranges = face->gasp.gaspRanges;
for ( j = 0; j < num_ranges; j++ )
{
gaspranges[j].maxPPEM = FT_GET_USHORT();
gaspranges[j].gaspFlag = FT_GET_USHORT();
FT_TRACE3(( "gaspRange %d: rangeMaxPPEM %5d, rangeGaspBehavior 0x%x\n",
j,
gaspranges[j].maxPPEM,
gaspranges[j].gaspFlag ));
}
FT_FRAME_EXIT();
Exit:
return error;
}
/* END */
/***************************************************************************/
/* */
/* ttmtx.c */
/* */
/* Load the metrics tables common to TTF and OTF fonts (body). */
/* */
/* Copyright 2006-2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ttmtx.h */
/* */
/* Load the metrics tables common to TTF and OTF fonts (specification). */
/* */
/* Copyright 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTMTX_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
tt_face_load_hhea( TT_Face face,
FT_Stream stream,
FT_Bool vertical );
FT_LOCAL( FT_Error )
tt_face_load_hmtx( TT_Face face,
FT_Stream stream,
FT_Bool vertical );
FT_LOCAL( FT_Error )
tt_face_get_metrics( TT_Face face,
FT_Bool vertical,
FT_UInt gindex,
FT_Short* abearing,
FT_UShort* aadvance );
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttmtx
/*
* Unfortunately, we can't enable our memory optimizations if
* FT_CONFIG_OPTION_OLD_INTERNALS is defined. This is because at least
* one rogue client (libXfont in the X.Org XServer) is directly accessing
* the metrics.
*/
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_hmtx */
/* */
/* <Description> */
/* Load the `hmtx' or `vmtx' table into a face object. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* vertical :: A boolean flag. If set, load `vmtx'. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_hmtx( TT_Face face,
FT_Stream stream,
FT_Bool vertical )
{
FT_Error error;
FT_ULong tag, table_size;
FT_ULong* ptable_offset;
FT_ULong* ptable_size;
if ( vertical )
{
tag = TTAG_vmtx;
ptable_offset = &face->vert_metrics_offset;
ptable_size = &face->vert_metrics_size;
}
else
{
tag = TTAG_hmtx;
ptable_offset = &face->horz_metrics_offset;
ptable_size = &face->horz_metrics_size;
}
error = face->goto_table( face, tag, stream, &table_size );
if ( error )
goto Fail;
*ptable_size = table_size;
*ptable_offset = FT_STREAM_POS();
Fail:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_hhea */
/* */
/* <Description> */
/* Load the `hhea' or 'vhea' table into a face object. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: The input stream. */
/* */
/* vertical :: A boolean flag. If set, load `vhea'. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_hhea( TT_Face face,
FT_Stream stream,
FT_Bool vertical )
{
FT_Error error;
TT_HoriHeader* header;
static const FT_Frame_Field metrics_header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TT_HoriHeader
FT_FRAME_START( 36 ),
FT_FRAME_ULONG ( Version ),
FT_FRAME_SHORT ( Ascender ),
FT_FRAME_SHORT ( Descender ),
FT_FRAME_SHORT ( Line_Gap ),
FT_FRAME_USHORT( advance_Width_Max ),
FT_FRAME_SHORT ( min_Left_Side_Bearing ),
FT_FRAME_SHORT ( min_Right_Side_Bearing ),
FT_FRAME_SHORT ( xMax_Extent ),
FT_FRAME_SHORT ( caret_Slope_Rise ),
FT_FRAME_SHORT ( caret_Slope_Run ),
FT_FRAME_SHORT ( caret_Offset ),
FT_FRAME_SHORT ( Reserved[0] ),
FT_FRAME_SHORT ( Reserved[1] ),
FT_FRAME_SHORT ( Reserved[2] ),
FT_FRAME_SHORT ( Reserved[3] ),
FT_FRAME_SHORT ( metric_Data_Format ),
FT_FRAME_USHORT( number_Of_HMetrics ),
FT_FRAME_END
};
if ( vertical )
{
void *v = &face->vertical;
error = face->goto_table( face, TTAG_vhea, stream, 0 );
if ( error )
goto Fail;
header = (TT_HoriHeader*)v;
}
else
{
error = face->goto_table( face, TTAG_hhea, stream, 0 );
if ( error )
goto Fail;
header = &face->horizontal;
}
if ( FT_STREAM_READ_FIELDS( metrics_header_fields, header ) )
goto Fail;
FT_TRACE3(( "Ascender: %5d\n", header->Ascender ));
FT_TRACE3(( "Descender: %5d\n", header->Descender ));
FT_TRACE3(( "number_Of_Metrics: %5u\n", header->number_Of_HMetrics ));
header->long_metrics = NULL;
header->short_metrics = NULL;
Fail:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_get_metrics */
/* */
/* <Description> */
/* Returns the horizontal or vertical metrics in font units for a */
/* given glyph. The metrics are the left side bearing (resp. top */
/* side bearing) and advance width (resp. advance height). */
/* */
/* <Input> */
/* header :: A pointer to either the horizontal or vertical metrics */
/* structure. */
/* */
/* idx :: The glyph index. */
/* */
/* <Output> */
/* bearing :: The bearing, either left side or top side. */
/* */
/* advance :: The advance width resp. advance height. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_get_metrics( TT_Face face,
FT_Bool vertical,
FT_UInt gindex,
FT_Short *abearing,
FT_UShort *aadvance )
{
FT_Error error;
FT_Stream stream = face->root.stream;
TT_HoriHeader* header;
FT_ULong table_pos, table_size, table_end;
FT_UShort k;
if ( vertical )
{
void* v = &face->vertical;
header = (TT_HoriHeader*)v;
table_pos = face->vert_metrics_offset;
table_size = face->vert_metrics_size;
}
else
{
header = &face->horizontal;
table_pos = face->horz_metrics_offset;
table_size = face->horz_metrics_size;
}
table_end = table_pos + table_size;
k = header->number_Of_HMetrics;
if ( k > 0 )
{
if ( gindex < (FT_UInt)k )
{
table_pos += 4 * gindex;
if ( table_pos + 4 > table_end )
goto NoData;
if ( FT_STREAM_SEEK( table_pos ) ||
FT_READ_USHORT( *aadvance ) ||
FT_READ_SHORT( *abearing ) )
goto NoData;
}
else
{
table_pos += 4 * ( k - 1 );
if ( table_pos + 4 > table_end )
goto NoData;
if ( FT_STREAM_SEEK( table_pos ) ||
FT_READ_USHORT( *aadvance ) )
goto NoData;
table_pos += 4 + 2 * ( gindex - k );
if ( table_pos + 2 > table_end )
*abearing = 0;
else
{
if ( !FT_STREAM_SEEK( table_pos ) )
(void)FT_READ_SHORT( *abearing );
}
}
}
else
{
NoData:
*abearing = 0;
*aadvance = 0;
}
return SFNT_Err_Ok;
}
/* END */
/***************************************************************************/
/* */
/* ttcmap.c */
/* */
/* TrueType character mapping table (cmap) support (body). */
/* */
/* Copyright 2002-2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* must come before FT_INTERNAL_VALIDATE_H */
/***************************************************************************/
/* */
/* ttcmap.h */
/* */
/* TrueType character mapping table (cmap) support (specification). */
/* */
/* Copyright 2002-2005, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTCMAP_H__
FT_BEGIN_HEADER
#define TT_CMAP_FLAG_UNSORTED 1
#define TT_CMAP_FLAG_OVERLAPPING 2
typedef struct TT_CMapRec_
{
FT_CMapRec cmap;
/* pointer to in-memory cmap table */
FT_Byte* data;
/* for format 4 only */
FT_Int flags;
} TT_CMapRec, *TT_CMap;
typedef const struct TT_CMap_ClassRec_* TT_CMap_Class;
typedef FT_Error
(*TT_CMap_ValidateFunc)( FT_Byte* data,
FT_Validator valid );
typedef struct TT_CMap_ClassRec_
{
FT_CMap_ClassRec clazz;
FT_UInt format;
TT_CMap_ValidateFunc validate;
TT_CMap_Info_GetFunc get_cmap_info;
} TT_CMap_ClassRec;
#define FT_DEFINE_TT_CMAP( class_, \
size_, \
init_, \
done_, \
char_index_, \
char_next_, \
char_var_index_, \
char_var_default_, \
variant_list_, \
charvariant_list_, \
variantchar_list_, \
format_, \
validate_, \
get_cmap_info_ ) \
FT_CALLBACK_TABLE_DEF \
const TT_CMap_ClassRec class_ = \
{ \
{ size_, \
init_, \
done_, \
char_index_, \
char_next_, \
char_var_index_, \
char_var_default_, \
variant_list_, \
charvariant_list_, \
variantchar_list_ \
}, \
\
format_, \
validate_, \
get_cmap_info_ \
};
typedef struct TT_ValidatorRec_
{
FT_ValidatorRec validator;
FT_UInt num_glyphs;
} TT_ValidatorRec, *TT_Validator;
#define TT_VALIDATOR( x ) ( (TT_Validator)( x ) )
#define TT_VALID_GLYPH_COUNT( x ) TT_VALIDATOR( x )->num_glyphs
FT_LOCAL( FT_Error )
tt_face_build_cmaps( TT_Face face );
/* used in tt-cmaps service */
FT_LOCAL( FT_Error )
tt_get_cmap_info( FT_CharMap charmap,
TT_CMapInfo *cmap_info );
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttcmap
#define TT_PEEK_SHORT FT_PEEK_SHORT
#define TT_PEEK_USHORT FT_PEEK_USHORT
#define TT_PEEK_UINT24 FT_PEEK_UOFF3
#define TT_PEEK_LONG FT_PEEK_LONG
#define TT_PEEK_ULONG FT_PEEK_ULONG
#define TT_NEXT_SHORT FT_NEXT_SHORT
#define TT_NEXT_USHORT FT_NEXT_USHORT
#define TT_NEXT_UINT24 FT_NEXT_UOFF3
#define TT_NEXT_LONG FT_NEXT_LONG
#define TT_NEXT_ULONG FT_NEXT_ULONG
FT_CALLBACK_DEF( FT_Error )
tt_cmap_init( TT_CMap cmap,
FT_Byte* table )
{
cmap->data = table;
return SFNT_Err_Ok;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FORMAT 0 *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* TABLE OVERVIEW */
/* -------------- */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* format 0 USHORT must be 0 */
/* length 2 USHORT table length in bytes */
/* language 4 USHORT Mac language code */
/* glyph_ids 6 BYTE[256] array of glyph indices */
/* 262 */
/* */
FT_CALLBACK_DEF( FT_Error )
tt_cmap0_validate( FT_Byte* table,
FT_Validator valid )
{
FT_Byte* p = table + 2;
FT_UInt length = TT_NEXT_USHORT( p );
if ( table + length > valid->limit || length < 262 )
FT_INVALID_TOO_SHORT;
/* check glyph indices whenever necessary */
if ( valid->level >= FT_VALIDATE_TIGHT )
{
FT_UInt n, idx;
p = table + 6;
for ( n = 0; n < 256; n++ )
{
idx = *p++;
if ( idx >= TT_VALID_GLYPH_COUNT( valid ) )
FT_INVALID_GLYPH_ID;
}
}
return SFNT_Err_Ok;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap0_char_index( TT_CMap cmap,
FT_UInt32 char_code )
{
FT_Byte* table = cmap->data;
return char_code < 256 ? table[6 + char_code] : 0;
}
FT_CALLBACK_DEF( FT_UInt32 )
tt_cmap0_char_next( TT_CMap cmap,
FT_UInt32 *pchar_code )
{
FT_Byte* table = cmap->data;
FT_UInt32 charcode = *pchar_code;
FT_UInt32 result = 0;
FT_UInt gindex = 0;
/* go to glyph IDs */
table += 6;
while ( ++charcode < 256 )
{
gindex = table[charcode];
if ( gindex != 0 )
{
result = charcode;
break;
}
}
*pchar_code = result;
return gindex;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap0_get_info( TT_CMap cmap,
TT_CMapInfo *cmap_info )
{
FT_Byte* p = cmap->data + 4;
cmap_info->format = 0;
cmap_info->language = (FT_ULong)TT_PEEK_USHORT( p );
return SFNT_Err_Ok;
}
FT_DEFINE_TT_CMAP(
tt_cmap0_class_rec,
sizeof ( TT_CMapRec ),
(FT_CMap_InitFunc) tt_cmap_init,
(FT_CMap_DoneFunc) NULL,
(FT_CMap_CharIndexFunc)tt_cmap0_char_index,
(FT_CMap_CharNextFunc) tt_cmap0_char_next,
NULL,
NULL,
NULL,
NULL,
NULL,
0,
(TT_CMap_ValidateFunc)tt_cmap0_validate,
(TT_CMap_Info_GetFunc)tt_cmap0_get_info )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FORMAT 2 *****/
/***** *****/
/***** This is used for certain CJK encodings that encode text in a *****/
/***** mixed 8/16 bits encoding along the following lines: *****/
/***** *****/
/***** * Certain byte values correspond to an 8-bit character code *****/
/***** (typically in the range 0..127 for ASCII compatibility). *****/
/***** *****/
/***** * Certain byte values signal the first byte of a 2-byte *****/
/***** character code (but these values are also valid as the *****/
/***** second byte of a 2-byte character). *****/
/***** *****/
/***** The following charmap lookup and iteration functions all *****/
/***** assume that the value "charcode" correspond to following: *****/
/***** *****/
/***** - For one byte characters, "charcode" is simply the *****/
/***** character code. *****/
/***** *****/
/***** - For two byte characters, "charcode" is the 2-byte *****/
/***** character code in big endian format. More exactly: *****/
/***** *****/
/***** (charcode >> 8) is the first byte value *****/
/***** (charcode & 0xFF) is the second byte value *****/
/***** *****/
/***** Note that not all values of "charcode" are valid according *****/
/***** to these rules, and the function moderately check the *****/
/***** arguments. *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* TABLE OVERVIEW */
/* -------------- */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* format 0 USHORT must be 2 */
/* length 2 USHORT table length in bytes */
/* language 4 USHORT Mac language code */
/* keys 6 USHORT[256] sub-header keys */
/* subs 518 SUBHEAD[NSUBS] sub-headers array */
/* glyph_ids 518+NSUB*8 USHORT[] glyph ID array */
/* */
/* The `keys' table is used to map charcode high-bytes to sub-headers. */
/* The value of `NSUBS' is the number of sub-headers defined in the */
/* table and is computed by finding the maximum of the `keys' table. */
/* */
/* Note that for any n, `keys[n]' is a byte offset within the `subs' */
/* table, i.e., it is the corresponding sub-header index multiplied */
/* by 8. */
/* */
/* Each sub-header has the following format: */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* first 0 USHORT first valid low-byte */
/* count 2 USHORT number of valid low-bytes */
/* delta 4 SHORT see below */
/* offset 6 USHORT see below */
/* */
/* A sub-header defines, for each high-byte, the range of valid */
/* low-bytes within the charmap. Note that the range defined by `first' */
/* and `count' must be completely included in the interval [0..255] */
/* according to the specification. */
/* */
/* If a character code is contained within a given sub-header, then */
/* mapping it to a glyph index is done as follows: */
/* */
/* * The value of `offset' is read. This is a _byte_ distance from the */
/* location of the `offset' field itself into a slice of the */
/* `glyph_ids' table. Let's call it `slice' (it is a USHORT[] too). */
/* */
/* * The value `slice[char.lo - first]' is read. If it is 0, there is */
/* no glyph for the charcode. Otherwise, the value of `delta' is */
/* added to it (modulo 65536) to form a new glyph index. */
/* */
/* It is up to the validation routine to check that all offsets fall */
/* within the glyph IDs table (and not within the `subs' table itself or */
/* outside of the CMap). */
/* */
FT_CALLBACK_DEF( FT_Error )
tt_cmap2_validate( FT_Byte* table,
FT_Validator valid )
{
/* skip format */
FT_Byte* p = table + 2;
FT_UInt length = TT_PEEK_USHORT( p );
FT_UInt n, max_subs;
/* keys table */
FT_Byte* keys;
/* sub-headers */
FT_Byte* subs;
/* glyph ID array */
FT_Byte* glyph_ids;
if ( table + length > valid->limit || length < 6 + 512 )
FT_INVALID_TOO_SHORT;
keys = table + 6;
/* parse keys to compute sub-headers count */
p = keys;
max_subs = 0;
for ( n = 0; n < 256; n++ )
{
FT_UInt idx = TT_NEXT_USHORT( p );
/* value must be multiple of 8 */
if ( valid->level >= FT_VALIDATE_PARANOID && ( idx & 7 ) != 0 )
FT_INVALID_DATA;
idx >>= 3;
if ( idx > max_subs )
max_subs = idx;
}
FT_ASSERT( p == table + 518 );
subs = p;
glyph_ids = subs + (max_subs + 1) * 8;
if ( glyph_ids > valid->limit )
FT_INVALID_TOO_SHORT;
/* parse sub-headers */
for ( n = 0; n <= max_subs; n++ )
{
FT_UInt first_code, code_count, offset;
FT_Int delta;
FT_Byte* ids;
first_code = TT_NEXT_USHORT( p );
code_count = TT_NEXT_USHORT( p );
delta = TT_NEXT_SHORT( p );
offset = TT_NEXT_USHORT( p );
/* many Dynalab fonts have empty sub-headers */
if ( code_count == 0 )
continue;
/* check range within 0..255 */
if ( valid->level >= FT_VALIDATE_PARANOID )
{
if ( first_code >= 256 || first_code + code_count > 256 )
FT_INVALID_DATA;
}
/* check offset */
if ( offset != 0 )
{
ids = p - 2 + offset;
if ( ids < glyph_ids || ids + code_count*2 > table + length )
FT_INVALID_OFFSET;
/* check glyph IDs */
if ( valid->level >= FT_VALIDATE_TIGHT )
{
FT_Byte* limit = p + code_count * 2;
FT_UInt idx;
for ( ; p < limit; )
{
idx = TT_NEXT_USHORT( p );
if ( idx != 0 )
{
idx = ( idx + delta ) & 0xFFFFU;
if ( idx >= TT_VALID_GLYPH_COUNT( valid ) )
FT_INVALID_GLYPH_ID;
}
}
}
}
}
return SFNT_Err_Ok;
}
/* return sub header corresponding to a given character code */
/* NULL on invalid charcode */
static FT_Byte*
tt_cmap2_get_subheader( FT_Byte* table,
FT_UInt32 char_code )
{
FT_Byte* result = NULL;
if ( char_code < 0x10000UL )
{
FT_UInt char_lo = (FT_UInt)( char_code & 0xFF );
FT_UInt char_hi = (FT_UInt)( char_code >> 8 );
/* keys table */
FT_Byte* p = table + 6;
/* subheaders table */
FT_Byte* subs = table + 518;
FT_Byte* sub;
if ( char_hi == 0 )
{
/* an 8-bit character code -- we use subHeader 0 in this case */
/* to test whether the character code is in the charmap */
/* */
/* jump to first sub-header */
sub = subs;
/* check that the sub-header for this byte is 0, which */
/* indicates that it is really a valid one-byte value */
/* Otherwise, return 0 */
/* */
p += char_lo * 2;
if ( TT_PEEK_USHORT( p ) != 0 )
goto Exit;
}
else
{
/* a 16-bit character code */
/* jump to key entry */
p += char_hi * 2;
/* jump to sub-header */
sub = subs + ( FT_PAD_FLOOR( TT_PEEK_USHORT( p ), 8 ) );
/* check that the high byte isn't a valid one-byte value */
if ( sub == subs )
goto Exit;
}
result = sub;
}
Exit:
return result;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap2_char_index( TT_CMap cmap,
FT_UInt32 char_code )
{
FT_Byte* table = cmap->data;
FT_UInt result = 0;
FT_Byte* subheader;
subheader = tt_cmap2_get_subheader( table, char_code );
if ( subheader )
{
FT_Byte* p = subheader;
FT_UInt idx = (FT_UInt)(char_code & 0xFF);
FT_UInt start, count;
FT_Int delta;
FT_UInt offset;
start = TT_NEXT_USHORT( p );
count = TT_NEXT_USHORT( p );
delta = TT_NEXT_SHORT ( p );
offset = TT_PEEK_USHORT( p );
idx -= start;
if ( idx < count && offset != 0 )
{
p += offset + 2 * idx;
idx = TT_PEEK_USHORT( p );
if ( idx != 0 )
result = (FT_UInt)( idx + delta ) & 0xFFFFU;
}
}
return result;
}
FT_CALLBACK_DEF( FT_UInt32 )
tt_cmap2_char_next( TT_CMap cmap,
FT_UInt32 *pcharcode )
{
FT_Byte* table = cmap->data;
FT_UInt gindex = 0;
FT_UInt32 result = 0;
FT_UInt32 charcode = *pcharcode + 1;
FT_Byte* subheader;
while ( charcode < 0x10000UL )
{
subheader = tt_cmap2_get_subheader( table, charcode );
if ( subheader )
{
FT_Byte* p = subheader;
FT_UInt start = TT_NEXT_USHORT( p );
FT_UInt count = TT_NEXT_USHORT( p );
FT_Int delta = TT_NEXT_SHORT ( p );
FT_UInt offset = TT_PEEK_USHORT( p );
FT_UInt char_lo = (FT_UInt)( charcode & 0xFF );
FT_UInt pos, idx;
if ( offset == 0 )
goto Next_SubHeader;
if ( char_lo < start )
{
char_lo = start;
pos = 0;
}
else
pos = (FT_UInt)( char_lo - start );
p += offset + pos * 2;
charcode = FT_PAD_FLOOR( charcode, 256 ) + char_lo;
for ( ; pos < count; pos++, charcode++ )
{
idx = TT_NEXT_USHORT( p );
if ( idx != 0 )
{
gindex = ( idx + delta ) & 0xFFFFU;
if ( gindex != 0 )
{
result = charcode;
goto Exit;
}
}
}
}
/* jump to next sub-header, i.e. higher byte value */
Next_SubHeader:
charcode = FT_PAD_FLOOR( charcode, 256 ) + 256;
}
Exit:
*pcharcode = result;
return gindex;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap2_get_info( TT_CMap cmap,
TT_CMapInfo *cmap_info )
{
FT_Byte* p = cmap->data + 4;
cmap_info->format = 2;
cmap_info->language = (FT_ULong)TT_PEEK_USHORT( p );
return SFNT_Err_Ok;
}
FT_DEFINE_TT_CMAP(
tt_cmap2_class_rec,
sizeof ( TT_CMapRec ),
(FT_CMap_InitFunc) tt_cmap_init,
(FT_CMap_DoneFunc) NULL,
(FT_CMap_CharIndexFunc)tt_cmap2_char_index,
(FT_CMap_CharNextFunc) tt_cmap2_char_next,
NULL,
NULL,
NULL,
NULL,
NULL,
2,
(TT_CMap_ValidateFunc)tt_cmap2_validate,
(TT_CMap_Info_GetFunc)tt_cmap2_get_info )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FORMAT 4 *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* TABLE OVERVIEW */
/* -------------- */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* format 0 USHORT must be 4 */
/* length 2 USHORT table length */
/* in bytes */
/* language 4 USHORT Mac language code */
/* */
/* segCountX2 6 USHORT 2*NUM_SEGS */
/* searchRange 8 USHORT 2*(1 << LOG_SEGS) */
/* entrySelector 10 USHORT LOG_SEGS */
/* rangeShift 12 USHORT segCountX2 - */
/* searchRange */
/* */
/* endCount 14 USHORT[NUM_SEGS] end charcode for */
/* each segment; last */
/* is 0xFFFF */
/* */
/* pad 14+NUM_SEGS*2 USHORT padding */
/* */
/* startCount 16+NUM_SEGS*2 USHORT[NUM_SEGS] first charcode for */
/* each segment */
/* */
/* idDelta 16+NUM_SEGS*4 SHORT[NUM_SEGS] delta for each */
/* segment */
/* idOffset 16+NUM_SEGS*6 SHORT[NUM_SEGS] range offset for */
/* each segment; can be */
/* zero */
/* */
/* glyphIds 16+NUM_SEGS*8 USHORT[] array of glyph ID */
/* ranges */
/* */
/* Character codes are modelled by a series of ordered (increasing) */
/* intervals called segments. Each segment has start and end codes, */
/* provided by the `startCount' and `endCount' arrays. Segments must */
/* not overlap, and the last segment should always contain the value */
/* 0xFFFF for `endCount'. */
/* */
/* The fields `searchRange', `entrySelector' and `rangeShift' are better */
/* ignored (they are traces of over-engineering in the TrueType */
/* specification). */
/* */
/* Each segment also has a signed `delta', as well as an optional offset */
/* within the `glyphIds' table. */
/* */
/* If a segment's idOffset is 0, the glyph index corresponding to any */
/* charcode within the segment is obtained by adding the value of */
/* `idDelta' directly to the charcode, modulo 65536. */
/* */
/* Otherwise, a glyph index is taken from the glyph IDs sub-array for */
/* the segment, and the value of `idDelta' is added to it. */
/* */
/* */
/* Finally, note that a lot of fonts contain an invalid last segment, */
/* where `start' and `end' are correctly set to 0xFFFF but both `delta' */
/* and `offset' are incorrect (e.g., `opens___.ttf' which comes with */
/* OpenOffice.org). We need special code to deal with them correctly. */
/* */
typedef struct TT_CMap4Rec_
{
TT_CMapRec cmap;
/* current charcode */
FT_UInt32 cur_charcode;
/* current glyph index */
FT_UInt cur_gindex;
FT_UInt num_ranges;
FT_UInt cur_range;
FT_UInt cur_start;
FT_UInt cur_end;
FT_Int cur_delta;
FT_Byte* cur_values;
} TT_CMap4Rec, *TT_CMap4;
FT_CALLBACK_DEF( FT_Error )
tt_cmap4_init( TT_CMap4 cmap,
FT_Byte* table )
{
FT_Byte* p;
cmap->cmap.data = table;
p = table + 6;
cmap->num_ranges = FT_PEEK_USHORT( p ) >> 1;
cmap->cur_charcode = (FT_UInt32)0xFFFFFFFFUL;
cmap->cur_gindex = 0;
return SFNT_Err_Ok;
}
static FT_Int
tt_cmap4_set_range( TT_CMap4 cmap,
FT_UInt range_index )
{
FT_Byte* table = cmap->cmap.data;
FT_Byte* p;
FT_UInt num_ranges = cmap->num_ranges;
while ( range_index < num_ranges )
{
FT_UInt offset;
p = table + 14 + range_index * 2;
cmap->cur_end = FT_PEEK_USHORT( p );
p += 2 + num_ranges * 2;
cmap->cur_start = FT_PEEK_USHORT( p );
p += num_ranges * 2;
cmap->cur_delta = FT_PEEK_SHORT( p );
p += num_ranges * 2;
offset = FT_PEEK_USHORT( p );
/* some fonts have an incorrect last segment; */
/* we have to catch it */
if ( range_index >= num_ranges - 1 &&
cmap->cur_start == 0xFFFFU &&
cmap->cur_end == 0xFFFFU )
{
TT_Face face = (TT_Face)cmap->cmap.cmap.charmap.face;
FT_Byte* limit = face->cmap_table + face->cmap_size;
if ( offset && p + offset + 2 > limit )
{
cmap->cur_delta = 1;
offset = 0;
}
}
if ( offset != 0xFFFFU )
{
cmap->cur_values = offset ? p + offset : NULL;
cmap->cur_range = range_index;
return 0;
}
/* we skip empty segments */
range_index++;
}
return -1;
}
/* search the index of the charcode next to cmap->cur_charcode; */
/* caller should call tt_cmap4_set_range with proper range */
/* before calling this function */
/* */
static void
tt_cmap4_next( TT_CMap4 cmap )
{
FT_UInt charcode;
if ( cmap->cur_charcode >= 0xFFFFUL )
goto Fail;
charcode = (FT_UInt)cmap->cur_charcode + 1;
if ( charcode < cmap->cur_start )
charcode = cmap->cur_start;
for ( ;; )
{
FT_Byte* values = cmap->cur_values;
FT_UInt end = cmap->cur_end;
FT_Int delta = cmap->cur_delta;
if ( charcode <= end )
{
if ( values )
{
FT_Byte* p = values + 2 * ( charcode - cmap->cur_start );
do
{
FT_UInt gindex = FT_NEXT_USHORT( p );
if ( gindex != 0 )
{
gindex = (FT_UInt)( ( gindex + delta ) & 0xFFFFU );
if ( gindex != 0 )
{
cmap->cur_charcode = charcode;
cmap->cur_gindex = gindex;
return;
}
}
} while ( ++charcode <= end );
}
else
{
do
{
FT_UInt gindex = (FT_UInt)( ( charcode + delta ) & 0xFFFFU );
if ( gindex != 0 )
{
cmap->cur_charcode = charcode;
cmap->cur_gindex = gindex;
return;
}
} while ( ++charcode <= end );
}
}
/* we need to find another range */
if ( tt_cmap4_set_range( cmap, cmap->cur_range + 1 ) < 0 )
break;
if ( charcode < cmap->cur_start )
charcode = cmap->cur_start;
}
Fail:
cmap->cur_charcode = (FT_UInt32)0xFFFFFFFFUL;
cmap->cur_gindex = 0;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap4_validate( FT_Byte* table,
FT_Validator valid )
{
/* skip format */
FT_Byte* p = table + 2;
FT_UInt length = TT_NEXT_USHORT( p );
FT_Byte *ends, *starts, *offsets, *deltas, *glyph_ids;
FT_UInt num_segs;
FT_Error error = SFNT_Err_Ok;
if ( length < 16 )
FT_INVALID_TOO_SHORT;
/* in certain fonts, the `length' field is invalid and goes */
/* out of bound. We try to correct this here... */
if ( table + length > valid->limit )
{
if ( valid->level >= FT_VALIDATE_TIGHT )
FT_INVALID_TOO_SHORT;
length = (FT_UInt)( valid->limit - table );
}
p = table + 6;
/* read segCountX2 */
num_segs = TT_NEXT_USHORT( p );
if ( valid->level >= FT_VALIDATE_PARANOID )
{
/* check that we have an even value here */
if ( num_segs & 1 )
FT_INVALID_DATA;
}
num_segs /= 2;
if ( length < 16 + num_segs * 2 * 4 )
FT_INVALID_TOO_SHORT;
/* check the search parameters - even though we never use them */
/* */
if ( valid->level >= FT_VALIDATE_PARANOID )
{
/* check the values of `searchRange', `entrySelector', `rangeShift' */
FT_UInt search_range = TT_NEXT_USHORT( p );
FT_UInt entry_selector = TT_NEXT_USHORT( p );
FT_UInt range_shift = TT_NEXT_USHORT( p );
/* must be even values */
if ( ( search_range | range_shift ) & 1 )
FT_INVALID_DATA;
search_range /= 2;
range_shift /= 2;
/* `search range' is the greatest power of 2 that is <= num_segs */
if ( search_range > num_segs ||
search_range * 2 < num_segs ||
search_range + range_shift != num_segs ||
search_range != ( 1U << entry_selector ) )
FT_INVALID_DATA;
}
ends = table + 14;
starts = table + 16 + num_segs * 2;
deltas = starts + num_segs * 2;
offsets = deltas + num_segs * 2;
glyph_ids = offsets + num_segs * 2;
/* check last segment; its end count value must be 0xFFFF */
if ( valid->level >= FT_VALIDATE_PARANOID )
{
p = ends + ( num_segs - 1 ) * 2;
if ( TT_PEEK_USHORT( p ) != 0xFFFFU )
FT_INVALID_DATA;
}
{
FT_UInt start, end, offset, n;
FT_UInt last_start = 0, last_end = 0;
FT_Int delta;
FT_Byte* p_start = starts;
FT_Byte* p_end = ends;
FT_Byte* p_delta = deltas;
FT_Byte* p_offset = offsets;
for ( n = 0; n < num_segs; n++ )
{
p = p_offset;
start = TT_NEXT_USHORT( p_start );
end = TT_NEXT_USHORT( p_end );
delta = TT_NEXT_SHORT( p_delta );
offset = TT_NEXT_USHORT( p_offset );
if ( start > end )
FT_INVALID_DATA;
/* this test should be performed at default validation level; */
/* unfortunately, some popular Asian fonts have overlapping */
/* ranges in their charmaps */
/* */
if ( start <= last_end && n > 0 )
{
if ( valid->level >= FT_VALIDATE_TIGHT )
FT_INVALID_DATA;
else
{
/* allow overlapping segments, provided their start points */
/* and end points, respectively, are in ascending order */
/* */
if ( last_start > start || last_end > end )
error |= TT_CMAP_FLAG_UNSORTED;
else
error |= TT_CMAP_FLAG_OVERLAPPING;
}
}
if ( offset && offset != 0xFFFFU )
{
/* start of glyph ID array */
p += offset;
/* check that we point within the glyph IDs table only */
if ( valid->level >= FT_VALIDATE_TIGHT )
{
if ( p < glyph_ids ||
p + ( end - start + 1 ) * 2 > table + length )
FT_INVALID_DATA;
}
/* Some fonts handle the last segment incorrectly. In */
/* theory, 0xFFFF might point to an ordinary glyph -- */
/* a cmap 4 is versatile and could be used for any */
/* encoding, not only Unicode. However, reality shows */
/* that far too many fonts are sloppy and incorrectly */
/* set all fields but `start' and `end' for the last */
/* segment if it contains only a single character. */
/* */
/* We thus omit the test here, delaying it to the */
/* routines which actually access the cmap. */
else if ( n != num_segs - 1 ||
!( start == 0xFFFFU && end == 0xFFFFU ) )
{
if ( p < glyph_ids ||
p + ( end - start + 1 ) * 2 > valid->limit )
FT_INVALID_DATA;
}
/* check glyph indices within the segment range */
if ( valid->level >= FT_VALIDATE_TIGHT )
{
FT_UInt i, idx;
for ( i = start; i < end; i++ )
{
idx = FT_NEXT_USHORT( p );
if ( idx != 0 )
{
idx = (FT_UInt)( idx + delta ) & 0xFFFFU;
if ( idx >= TT_VALID_GLYPH_COUNT( valid ) )
FT_INVALID_GLYPH_ID;
}
}
}
}
else if ( offset == 0xFFFFU )
{
/* some fonts (erroneously?) use a range offset of 0xFFFF */
/* to mean missing glyph in cmap table */
/* */
if ( valid->level >= FT_VALIDATE_PARANOID ||
n != num_segs - 1 ||
!( start == 0xFFFFU && end == 0xFFFFU ) )
FT_INVALID_DATA;
}
last_start = start;
last_end = end;
}
}
return error;
}
static FT_UInt
tt_cmap4_char_map_linear( TT_CMap cmap,
FT_UInt32* pcharcode,
FT_Bool next )
{
FT_UInt num_segs2, start, end, offset;
FT_Int delta;
FT_UInt i, num_segs;
FT_UInt32 charcode = *pcharcode;
FT_UInt gindex = 0;
FT_Byte* p;
p = cmap->data + 6;
num_segs2 = FT_PAD_FLOOR( TT_PEEK_USHORT( p ), 2 );
num_segs = num_segs2 >> 1;
if ( !num_segs )
return 0;
if ( next )
charcode++;
/* linear search */
for ( ; charcode <= 0xFFFFU; charcode++ )
{
FT_Byte* q;
/* ends table */
p = cmap->data + 14;
/* starts table */
q = cmap->data + 16 + num_segs2;
for ( i = 0; i < num_segs; i++ )
{
end = TT_NEXT_USHORT( p );
start = TT_NEXT_USHORT( q );
if ( charcode >= start && charcode <= end )
{
p = q - 2 + num_segs2;
delta = TT_PEEK_SHORT( p );
p += num_segs2;
offset = TT_PEEK_USHORT( p );
/* some fonts have an incorrect last segment; */
/* we have to catch it */
if ( i >= num_segs - 1 &&
start == 0xFFFFU && end == 0xFFFFU )
{
TT_Face face = (TT_Face)cmap->cmap.charmap.face;
FT_Byte* limit = face->cmap_table + face->cmap_size;
if ( offset && p + offset + 2 > limit )
{
delta = 1;
offset = 0;
}
}
if ( offset == 0xFFFFU )
continue;
if ( offset )
{
p += offset + ( charcode - start ) * 2;
gindex = TT_PEEK_USHORT( p );
if ( gindex != 0 )
gindex = (FT_UInt)( gindex + delta ) & 0xFFFFU;
}
else
gindex = (FT_UInt)( charcode + delta ) & 0xFFFFU;
break;
}
}
if ( !next || gindex )
break;
}
if ( next && gindex )
*pcharcode = charcode;
return gindex;
}
static FT_UInt
tt_cmap4_char_map_binary( TT_CMap cmap,
FT_UInt32* pcharcode,
FT_Bool next )
{
FT_UInt num_segs2, start, end, offset;
FT_Int delta;
FT_UInt max, min, mid, num_segs;
FT_UInt charcode = (FT_UInt)*pcharcode;
FT_UInt gindex = 0;
FT_Byte* p;
p = cmap->data + 6;
num_segs2 = FT_PAD_FLOOR( TT_PEEK_USHORT( p ), 2 );
if ( !num_segs2 )
return 0;
num_segs = num_segs2 >> 1;
/* make compiler happy */
mid = num_segs;
end = 0xFFFFU;
if ( next )
charcode++;
min = 0;
max = num_segs;
/* binary search */
while ( min < max )
{
mid = ( min + max ) >> 1;
p = cmap->data + 14 + mid * 2;
end = TT_PEEK_USHORT( p );
p += 2 + num_segs2;
start = TT_PEEK_USHORT( p );
if ( charcode < start )
max = mid;
else if ( charcode > end )
min = mid + 1;
else
{
p += num_segs2;
delta = TT_PEEK_SHORT( p );
p += num_segs2;
offset = TT_PEEK_USHORT( p );
/* some fonts have an incorrect last segment; */
/* we have to catch it */
if ( mid >= num_segs - 1 &&
start == 0xFFFFU && end == 0xFFFFU )
{
TT_Face face = (TT_Face)cmap->cmap.charmap.face;
FT_Byte* limit = face->cmap_table + face->cmap_size;
if ( offset && p + offset + 2 > limit )
{
delta = 1;
offset = 0;
}
}
/* search the first segment containing `charcode' */
if ( cmap->flags & TT_CMAP_FLAG_OVERLAPPING )
{
FT_UInt i;
/* call the current segment `max' */
max = mid;
if ( offset == 0xFFFFU )
mid = max + 1;
/* search in segments before the current segment */
for ( i = max ; i > 0; i-- )
{
FT_UInt prev_end;
FT_Byte* old_p;
old_p = p;
p = cmap->data + 14 + ( i - 1 ) * 2;
prev_end = TT_PEEK_USHORT( p );
if ( charcode > prev_end )
{
p = old_p;
break;
}
end = prev_end;
p += 2 + num_segs2;
start = TT_PEEK_USHORT( p );
p += num_segs2;
delta = TT_PEEK_SHORT( p );
p += num_segs2;
offset = TT_PEEK_USHORT( p );
if ( offset != 0xFFFFU )
mid = i - 1;
}
/* no luck */
if ( mid == max + 1 )
{
if ( i != max )
{
p = cmap->data + 14 + max * 2;
end = TT_PEEK_USHORT( p );
p += 2 + num_segs2;
start = TT_PEEK_USHORT( p );
p += num_segs2;
delta = TT_PEEK_SHORT( p );
p += num_segs2;
offset = TT_PEEK_USHORT( p );
}
mid = max;
/* search in segments after the current segment */
for ( i = max + 1; i < num_segs; i++ )
{
FT_UInt next_end, next_start;
p = cmap->data + 14 + i * 2;
next_end = TT_PEEK_USHORT( p );
p += 2 + num_segs2;
next_start = TT_PEEK_USHORT( p );
if ( charcode < next_start )
break;
end = next_end;
start = next_start;
p += num_segs2;
delta = TT_PEEK_SHORT( p );
p += num_segs2;
offset = TT_PEEK_USHORT( p );
if ( offset != 0xFFFFU )
mid = i;
}
i--;
/* still no luck */
if ( mid == max )
{
mid = i;
break;
}
}
/* end, start, delta, and offset are for the i'th segment */
if ( mid != i )
{
p = cmap->data + 14 + mid * 2;
end = TT_PEEK_USHORT( p );
p += 2 + num_segs2;
start = TT_PEEK_USHORT( p );
p += num_segs2;
delta = TT_PEEK_SHORT( p );
p += num_segs2;
offset = TT_PEEK_USHORT( p );
}
}
else
{
if ( offset == 0xFFFFU )
break;
}
if ( offset )
{
p += offset + ( charcode - start ) * 2;
gindex = TT_PEEK_USHORT( p );
if ( gindex != 0 )
gindex = (FT_UInt)( gindex + delta ) & 0xFFFFU;
}
else
gindex = (FT_UInt)( charcode + delta ) & 0xFFFFU;
break;
}
}
if ( next )
{
TT_CMap4 cmap4 = (TT_CMap4)cmap;
/* if `charcode' is not in any segment, then `mid' is */
/* the segment nearest to `charcode' */
/* */
if ( charcode > end )
{
mid++;
if ( mid == num_segs )
return 0;
}
if ( tt_cmap4_set_range( cmap4, mid ) )
{
if ( gindex )
*pcharcode = charcode;
}
else
{
cmap4->cur_charcode = charcode;
if ( gindex )
cmap4->cur_gindex = gindex;
else
{
cmap4->cur_charcode = charcode;
tt_cmap4_next( cmap4 );
gindex = cmap4->cur_gindex;
}
if ( gindex )
*pcharcode = cmap4->cur_charcode;
}
}
return gindex;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap4_char_index( TT_CMap cmap,
FT_UInt32 char_code )
{
if ( char_code >= 0x10000UL )
return 0;
if ( cmap->flags & TT_CMAP_FLAG_UNSORTED )
return tt_cmap4_char_map_linear( cmap, &char_code, 0 );
else
return tt_cmap4_char_map_binary( cmap, &char_code, 0 );
}
FT_CALLBACK_DEF( FT_UInt32 )
tt_cmap4_char_next( TT_CMap cmap,
FT_UInt32 *pchar_code )
{
FT_UInt gindex;
if ( *pchar_code >= 0xFFFFU )
return 0;
if ( cmap->flags & TT_CMAP_FLAG_UNSORTED )
gindex = tt_cmap4_char_map_linear( cmap, pchar_code, 1 );
else
{
TT_CMap4 cmap4 = (TT_CMap4)cmap;
/* no need to search */
if ( *pchar_code == cmap4->cur_charcode )
{
tt_cmap4_next( cmap4 );
gindex = cmap4->cur_gindex;
if ( gindex )
*pchar_code = cmap4->cur_charcode;
}
else
gindex = tt_cmap4_char_map_binary( cmap, pchar_code, 1 );
}
return gindex;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap4_get_info( TT_CMap cmap,
TT_CMapInfo *cmap_info )
{
FT_Byte* p = cmap->data + 4;
cmap_info->format = 4;
cmap_info->language = (FT_ULong)TT_PEEK_USHORT( p );
return SFNT_Err_Ok;
}
FT_DEFINE_TT_CMAP(
tt_cmap4_class_rec,
sizeof ( TT_CMap4Rec ),
(FT_CMap_InitFunc) tt_cmap4_init,
(FT_CMap_DoneFunc) NULL,
(FT_CMap_CharIndexFunc)tt_cmap4_char_index,
(FT_CMap_CharNextFunc) tt_cmap4_char_next,
NULL,
NULL,
NULL,
NULL,
NULL,
4,
(TT_CMap_ValidateFunc)tt_cmap4_validate,
(TT_CMap_Info_GetFunc)tt_cmap4_get_info )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FORMAT 6 *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* TABLE OVERVIEW */
/* -------------- */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* format 0 USHORT must be 4 */
/* length 2 USHORT table length in bytes */
/* language 4 USHORT Mac language code */
/* */
/* first 6 USHORT first segment code */
/* count 8 USHORT segment size in chars */
/* glyphIds 10 USHORT[count] glyph IDs */
/* */
/* A very simplified segment mapping. */
/* */
FT_CALLBACK_DEF( FT_Error )
tt_cmap6_validate( FT_Byte* table,
FT_Validator valid )
{
FT_Byte* p;
FT_UInt length, count;
if ( table + 10 > valid->limit )
FT_INVALID_TOO_SHORT;
p = table + 2;
length = TT_NEXT_USHORT( p );
/* skip language and start index */
p = table + 8;
count = TT_NEXT_USHORT( p );
if ( table + length > valid->limit || length < 10 + count * 2 )
FT_INVALID_TOO_SHORT;
/* check glyph indices */
if ( valid->level >= FT_VALIDATE_TIGHT )
{
FT_UInt gindex;
for ( ; count > 0; count-- )
{
gindex = TT_NEXT_USHORT( p );
if ( gindex >= TT_VALID_GLYPH_COUNT( valid ) )
FT_INVALID_GLYPH_ID;
}
}
return SFNT_Err_Ok;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap6_char_index( TT_CMap cmap,
FT_UInt32 char_code )
{
FT_Byte* table = cmap->data;
FT_UInt result = 0;
FT_Byte* p = table + 6;
FT_UInt start = TT_NEXT_USHORT( p );
FT_UInt count = TT_NEXT_USHORT( p );
FT_UInt idx = (FT_UInt)( char_code - start );
if ( idx < count )
{
p += 2 * idx;
result = TT_PEEK_USHORT( p );
}
return result;
}
FT_CALLBACK_DEF( FT_UInt32 )
tt_cmap6_char_next( TT_CMap cmap,
FT_UInt32 *pchar_code )
{
FT_Byte* table = cmap->data;
FT_UInt32 result = 0;
FT_UInt32 char_code = *pchar_code + 1;
FT_UInt gindex = 0;
FT_Byte* p = table + 6;
FT_UInt start = TT_NEXT_USHORT( p );
FT_UInt count = TT_NEXT_USHORT( p );
FT_UInt idx;
if ( char_code >= 0x10000UL )
goto Exit;
if ( char_code < start )
char_code = start;
idx = (FT_UInt)( char_code - start );
p += 2 * idx;
for ( ; idx < count; idx++ )
{
gindex = TT_NEXT_USHORT( p );
if ( gindex != 0 )
{
result = char_code;
break;
}
char_code++;
}
Exit:
*pchar_code = result;
return gindex;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap6_get_info( TT_CMap cmap,
TT_CMapInfo *cmap_info )
{
FT_Byte* p = cmap->data + 4;
cmap_info->format = 6;
cmap_info->language = (FT_ULong)TT_PEEK_USHORT( p );
return SFNT_Err_Ok;
}
FT_DEFINE_TT_CMAP(
tt_cmap6_class_rec,
sizeof ( TT_CMapRec ),
(FT_CMap_InitFunc) tt_cmap_init,
(FT_CMap_DoneFunc) NULL,
(FT_CMap_CharIndexFunc)tt_cmap6_char_index,
(FT_CMap_CharNextFunc) tt_cmap6_char_next,
NULL,
NULL,
NULL,
NULL,
NULL,
6,
(TT_CMap_ValidateFunc)tt_cmap6_validate,
(TT_CMap_Info_GetFunc)tt_cmap6_get_info )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FORMAT 8 *****/
/***** *****/
/***** It is hard to completely understand what the OpenType spec *****/
/***** says about this format, but here is my conclusion. *****/
/***** *****/
/***** The purpose of this format is to easily map UTF-16 text to *****/
/***** glyph indices. Basically, the `char_code' must be in one of *****/
/***** the following formats: *****/
/***** *****/
/***** - A 16-bit value that isn't part of the Unicode Surrogates *****/
/***** Area (i.e. U+D800-U+DFFF). *****/
/***** *****/
/***** - A 32-bit value, made of two surrogate values, i.e.. if *****/
/***** `char_code = (char_hi << 16) | char_lo', then both *****/
/***** `char_hi' and `char_lo' must be in the Surrogates Area. *****/
/***** Area. *****/
/***** *****/
/***** The `is32' table embedded in the charmap indicates whether a *****/
/***** given 16-bit value is in the surrogates area or not. *****/
/***** *****/
/***** So, for any given `char_code', we can assert the following: *****/
/***** *****/
/***** If `char_hi == 0' then we must have `is32[char_lo] == 0'. *****/
/***** *****/
/***** If `char_hi != 0' then we must have both *****/
/***** `is32[char_hi] != 0' and `is32[char_lo] != 0'. *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* TABLE OVERVIEW */
/* -------------- */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* format 0 USHORT must be 8 */
/* reserved 2 USHORT reserved */
/* length 4 ULONG length in bytes */
/* language 8 ULONG Mac language code */
/* is32 12 BYTE[8192] 32-bitness bitmap */
/* count 8204 ULONG number of groups */
/* */
/* This header is followed by `count' groups of the following format: */
/* */
/* start 0 ULONG first charcode */
/* end 4 ULONG last charcode */
/* startId 8 ULONG start glyph ID for the group */
/* */
FT_CALLBACK_DEF( FT_Error )
tt_cmap8_validate( FT_Byte* table,
FT_Validator valid )
{
FT_Byte* p = table + 4;
FT_Byte* is32;
FT_UInt32 length;
FT_UInt32 num_groups;
if ( table + 16 + 8192 > valid->limit )
FT_INVALID_TOO_SHORT;
length = TT_NEXT_ULONG( p );
if ( length > (FT_UInt32)( valid->limit - table ) || length < 8192 + 16 )
FT_INVALID_TOO_SHORT;
is32 = table + 12;
/* skip `is32' array */
p = is32 + 8192;
num_groups = TT_NEXT_ULONG( p );
if ( p + num_groups * 12 > valid->limit )
FT_INVALID_TOO_SHORT;
/* check groups, they must be in increasing order */
{
FT_UInt32 n, start, end, start_id, count, last = 0;
for ( n = 0; n < num_groups; n++ )
{
FT_UInt hi, lo;
start = TT_NEXT_ULONG( p );
end = TT_NEXT_ULONG( p );
start_id = TT_NEXT_ULONG( p );
if ( start > end )
FT_INVALID_DATA;
if ( n > 0 && start <= last )
FT_INVALID_DATA;
if ( valid->level >= FT_VALIDATE_TIGHT )
{
if ( start_id + end - start >= TT_VALID_GLYPH_COUNT( valid ) )
FT_INVALID_GLYPH_ID;
count = (FT_UInt32)( end - start + 1 );
if ( start & ~0xFFFFU )
{
/* start_hi != 0; check that is32[i] is 1 for each i in */
/* the `hi' and `lo' of the range [start..end] */
for ( ; count > 0; count--, start++ )
{
hi = (FT_UInt)( start >> 16 );
lo = (FT_UInt)( start & 0xFFFFU );
if ( (is32[hi >> 3] & ( 0x80 >> ( hi & 7 ) ) ) == 0 )
FT_INVALID_DATA;
if ( (is32[lo >> 3] & ( 0x80 >> ( lo & 7 ) ) ) == 0 )
FT_INVALID_DATA;
}
}
else
{
/* start_hi == 0; check that is32[i] is 0 for each i in */
/* the range [start..end] */
/* end_hi cannot be != 0! */
if ( end & ~0xFFFFU )
FT_INVALID_DATA;
for ( ; count > 0; count--, start++ )
{
lo = (FT_UInt)( start & 0xFFFFU );
if ( (is32[lo >> 3] & ( 0x80 >> ( lo & 7 ) ) ) != 0 )
FT_INVALID_DATA;
}
}
}
last = end;
}
}
return SFNT_Err_Ok;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap8_char_index( TT_CMap cmap,
FT_UInt32 char_code )
{
FT_Byte* table = cmap->data;
FT_UInt result = 0;
FT_Byte* p = table + 8204;
FT_UInt32 num_groups = TT_NEXT_ULONG( p );
FT_UInt32 start, end, start_id;
for ( ; num_groups > 0; num_groups-- )
{
start = TT_NEXT_ULONG( p );
end = TT_NEXT_ULONG( p );
start_id = TT_NEXT_ULONG( p );
if ( char_code < start )
break;
if ( char_code <= end )
{
result = (FT_UInt)( start_id + char_code - start );
break;
}
}
return result;
}
FT_CALLBACK_DEF( FT_UInt32 )
tt_cmap8_char_next( TT_CMap cmap,
FT_UInt32 *pchar_code )
{
FT_UInt32 result = 0;
FT_UInt32 char_code = *pchar_code + 1;
FT_UInt gindex = 0;
FT_Byte* table = cmap->data;
FT_Byte* p = table + 8204;
FT_UInt32 num_groups = TT_NEXT_ULONG( p );
FT_UInt32 start, end, start_id;
p = table + 8208;
for ( ; num_groups > 0; num_groups-- )
{
start = TT_NEXT_ULONG( p );
end = TT_NEXT_ULONG( p );
start_id = TT_NEXT_ULONG( p );
if ( char_code < start )
char_code = start;
if ( char_code <= end )
{
gindex = (FT_UInt)( char_code - start + start_id );
if ( gindex != 0 )
{
result = char_code;
goto Exit;
}
}
}
Exit:
*pchar_code = result;
return gindex;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap8_get_info( TT_CMap cmap,
TT_CMapInfo *cmap_info )
{
FT_Byte* p = cmap->data + 8;
cmap_info->format = 8;
cmap_info->language = (FT_ULong)TT_PEEK_ULONG( p );
return SFNT_Err_Ok;
}
FT_DEFINE_TT_CMAP(
tt_cmap8_class_rec,
sizeof ( TT_CMapRec ),
(FT_CMap_InitFunc) tt_cmap_init,
(FT_CMap_DoneFunc) NULL,
(FT_CMap_CharIndexFunc)tt_cmap8_char_index,
(FT_CMap_CharNextFunc) tt_cmap8_char_next,
NULL,
NULL,
NULL,
NULL,
NULL,
8,
(TT_CMap_ValidateFunc)tt_cmap8_validate,
(TT_CMap_Info_GetFunc)tt_cmap8_get_info )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FORMAT 10 *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* TABLE OVERVIEW */
/* -------------- */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* format 0 USHORT must be 10 */
/* reserved 2 USHORT reserved */
/* length 4 ULONG length in bytes */
/* language 8 ULONG Mac language code */
/* */
/* start 12 ULONG first char in range */
/* count 16 ULONG number of chars in range */
/* glyphIds 20 USHORT[count] glyph indices covered */
/* */
FT_CALLBACK_DEF( FT_Error )
tt_cmap10_validate( FT_Byte* table,
FT_Validator valid )
{
FT_Byte* p = table + 4;
FT_ULong length, count;
if ( table + 20 > valid->limit )
FT_INVALID_TOO_SHORT;
length = TT_NEXT_ULONG( p );
p = table + 16;
count = TT_NEXT_ULONG( p );
if ( length > (FT_ULong)( valid->limit - table ) ||
length < 20 + count * 2 )
FT_INVALID_TOO_SHORT;
/* check glyph indices */
if ( valid->level >= FT_VALIDATE_TIGHT )
{
FT_UInt gindex;
for ( ; count > 0; count-- )
{
gindex = TT_NEXT_USHORT( p );
if ( gindex >= TT_VALID_GLYPH_COUNT( valid ) )
FT_INVALID_GLYPH_ID;
}
}
return SFNT_Err_Ok;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap10_char_index( TT_CMap cmap,
FT_UInt32 char_code )
{
FT_Byte* table = cmap->data;
FT_UInt result = 0;
FT_Byte* p = table + 12;
FT_UInt32 start = TT_NEXT_ULONG( p );
FT_UInt32 count = TT_NEXT_ULONG( p );
FT_UInt32 idx = (FT_ULong)( char_code - start );
if ( idx < count )
{
p += 2 * idx;
result = TT_PEEK_USHORT( p );
}
return result;
}
FT_CALLBACK_DEF( FT_UInt32 )
tt_cmap10_char_next( TT_CMap cmap,
FT_UInt32 *pchar_code )
{
FT_Byte* table = cmap->data;
FT_UInt32 char_code = *pchar_code + 1;
FT_UInt gindex = 0;
FT_Byte* p = table + 12;
FT_UInt32 start = TT_NEXT_ULONG( p );
FT_UInt32 count = TT_NEXT_ULONG( p );
FT_UInt32 idx;
if ( char_code < start )
char_code = start;
idx = (FT_UInt32)( char_code - start );
p += 2 * idx;
for ( ; idx < count; idx++ )
{
gindex = TT_NEXT_USHORT( p );
if ( gindex != 0 )
break;
char_code++;
}
*pchar_code = char_code;
return gindex;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap10_get_info( TT_CMap cmap,
TT_CMapInfo *cmap_info )
{
FT_Byte* p = cmap->data + 8;
cmap_info->format = 10;
cmap_info->language = (FT_ULong)TT_PEEK_ULONG( p );
return SFNT_Err_Ok;
}
FT_DEFINE_TT_CMAP(
tt_cmap10_class_rec,
sizeof ( TT_CMapRec ),
(FT_CMap_InitFunc) tt_cmap_init,
(FT_CMap_DoneFunc) NULL,
(FT_CMap_CharIndexFunc)tt_cmap10_char_index,
(FT_CMap_CharNextFunc) tt_cmap10_char_next,
NULL,
NULL,
NULL,
NULL,
NULL,
10,
(TT_CMap_ValidateFunc)tt_cmap10_validate,
(TT_CMap_Info_GetFunc)tt_cmap10_get_info )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FORMAT 12 *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* TABLE OVERVIEW */
/* -------------- */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* format 0 USHORT must be 12 */
/* reserved 2 USHORT reserved */
/* length 4 ULONG length in bytes */
/* language 8 ULONG Mac language code */
/* count 12 ULONG number of groups */
/* 16 */
/* */
/* This header is followed by `count' groups of the following format: */
/* */
/* start 0 ULONG first charcode */
/* end 4 ULONG last charcode */
/* startId 8 ULONG start glyph ID for the group */
/* */
typedef struct TT_CMap12Rec_
{
TT_CMapRec cmap;
FT_Bool valid;
FT_ULong cur_charcode;
FT_UInt cur_gindex;
FT_ULong cur_group;
FT_ULong num_groups;
} TT_CMap12Rec, *TT_CMap12;
FT_CALLBACK_DEF( FT_Error )
tt_cmap12_init( TT_CMap12 cmap,
FT_Byte* table )
{
cmap->cmap.data = table;
table += 12;
cmap->num_groups = FT_PEEK_ULONG( table );
cmap->valid = 0;
return SFNT_Err_Ok;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap12_validate( FT_Byte* table,
FT_Validator valid )
{
FT_Byte* p;
FT_ULong length;
FT_ULong num_groups;
if ( table + 16 > valid->limit )
FT_INVALID_TOO_SHORT;
p = table + 4;
length = TT_NEXT_ULONG( p );
p = table + 12;
num_groups = TT_NEXT_ULONG( p );
if ( length > (FT_ULong)( valid->limit - table ) ||
length < 16 + 12 * num_groups )
FT_INVALID_TOO_SHORT;
/* check groups, they must be in increasing order */
{
FT_ULong n, start, end, start_id, last = 0;
for ( n = 0; n < num_groups; n++ )
{
start = TT_NEXT_ULONG( p );
end = TT_NEXT_ULONG( p );
start_id = TT_NEXT_ULONG( p );
if ( start > end )
FT_INVALID_DATA;
if ( n > 0 && start <= last )
FT_INVALID_DATA;
if ( valid->level >= FT_VALIDATE_TIGHT )
{
if ( start_id + end - start >= TT_VALID_GLYPH_COUNT( valid ) )
FT_INVALID_GLYPH_ID;
}
last = end;
}
}
return SFNT_Err_Ok;
}
/* search the index of the charcode next to cmap->cur_charcode */
/* cmap->cur_group should be set up properly by caller */
/* */
static void
tt_cmap12_next( TT_CMap12 cmap )
{
FT_Byte* p;
FT_ULong start, end, start_id, char_code;
FT_ULong n;
FT_UInt gindex;
if ( cmap->cur_charcode >= 0xFFFFFFFFUL )
goto Fail;
char_code = cmap->cur_charcode + 1;
n = cmap->cur_group;
for ( n = cmap->cur_group; n < cmap->num_groups; n++ )
{
p = cmap->cmap.data + 16 + 12 * n;
start = TT_NEXT_ULONG( p );
end = TT_NEXT_ULONG( p );
start_id = TT_PEEK_ULONG( p );
if ( char_code < start )
char_code = start;
for ( ; char_code <= end; char_code++ )
{
gindex = (FT_UInt)( start_id + char_code - start );
if ( gindex )
{
cmap->cur_charcode = char_code;;
cmap->cur_gindex = gindex;
cmap->cur_group = n;
return;
}
}
}
Fail:
cmap->valid = 0;
}
static FT_UInt
tt_cmap12_char_map_binary( TT_CMap cmap,
FT_UInt32* pchar_code,
FT_Bool next )
{
FT_UInt gindex = 0;
FT_Byte* p = cmap->data + 12;
FT_UInt32 num_groups = TT_PEEK_ULONG( p );
FT_UInt32 char_code = *pchar_code;
FT_UInt32 start, end, start_id;
FT_UInt32 max, min, mid;
if ( !num_groups )
return 0;
/* make compiler happy */
mid = num_groups;
end = 0xFFFFFFFFUL;
if ( next )
char_code++;
min = 0;
max = num_groups;
/* binary search */
while ( min < max )
{
mid = ( min + max ) >> 1;
p = cmap->data + 16 + 12 * mid;
start = TT_NEXT_ULONG( p );
end = TT_NEXT_ULONG( p );
if ( char_code < start )
max = mid;
else if ( char_code > end )
min = mid + 1;
else
{
start_id = TT_PEEK_ULONG( p );
gindex = (FT_UInt)( start_id + char_code - start );
break;
}
}
if ( next )
{
TT_CMap12 cmap12 = (TT_CMap12)cmap;
/* if `char_code' is not in any group, then `mid' is */
/* the group nearest to `char_code' */
/* */
if ( char_code > end )
{
mid++;
if ( mid == num_groups )
return 0;
}
cmap12->valid = 1;
cmap12->cur_charcode = char_code;
cmap12->cur_group = mid;
if ( !gindex )
{
tt_cmap12_next( cmap12 );
if ( cmap12->valid )
gindex = cmap12->cur_gindex;
}
else
cmap12->cur_gindex = gindex;
if ( gindex )
*pchar_code = cmap12->cur_charcode;
}
return gindex;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap12_char_index( TT_CMap cmap,
FT_UInt32 char_code )
{
return tt_cmap12_char_map_binary( cmap, &char_code, 0 );
}
FT_CALLBACK_DEF( FT_UInt32 )
tt_cmap12_char_next( TT_CMap cmap,
FT_UInt32 *pchar_code )
{
TT_CMap12 cmap12 = (TT_CMap12)cmap;
FT_ULong gindex;
if ( cmap12->cur_charcode >= 0xFFFFFFFFUL )
return 0;
/* no need to search */
if ( cmap12->valid && cmap12->cur_charcode == *pchar_code )
{
tt_cmap12_next( cmap12 );
if ( cmap12->valid )
{
gindex = cmap12->cur_gindex;
/* XXX: check cur_charcode overflow is expected */
if ( gindex )
*pchar_code = (FT_UInt32)cmap12->cur_charcode;
}
else
gindex = 0;
}
else
gindex = tt_cmap12_char_map_binary( cmap, pchar_code, 1 );
/* XXX: check gindex overflow is expected */
return (FT_UInt32)gindex;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap12_get_info( TT_CMap cmap,
TT_CMapInfo *cmap_info )
{
FT_Byte* p = cmap->data + 8;
cmap_info->format = 12;
cmap_info->language = (FT_ULong)TT_PEEK_ULONG( p );
return SFNT_Err_Ok;
}
FT_DEFINE_TT_CMAP(
tt_cmap12_class_rec,
sizeof ( TT_CMap12Rec ),
(FT_CMap_InitFunc) tt_cmap12_init,
(FT_CMap_DoneFunc) NULL,
(FT_CMap_CharIndexFunc)tt_cmap12_char_index,
(FT_CMap_CharNextFunc) tt_cmap12_char_next,
NULL,
NULL,
NULL,
NULL,
NULL,
12,
(TT_CMap_ValidateFunc)tt_cmap12_validate,
(TT_CMap_Info_GetFunc)tt_cmap12_get_info )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FORMAT 13 *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* TABLE OVERVIEW */
/* -------------- */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* format 0 USHORT must be 13 */
/* reserved 2 USHORT reserved */
/* length 4 ULONG length in bytes */
/* language 8 ULONG Mac language code */
/* count 12 ULONG number of groups */
/* 16 */
/* */
/* This header is followed by `count' groups of the following format: */
/* */
/* start 0 ULONG first charcode */
/* end 4 ULONG last charcode */
/* glyphId 8 ULONG glyph ID for the whole group */
/* */
typedef struct TT_CMap13Rec_
{
TT_CMapRec cmap;
FT_Bool valid;
FT_ULong cur_charcode;
FT_UInt cur_gindex;
FT_ULong cur_group;
FT_ULong num_groups;
} TT_CMap13Rec, *TT_CMap13;
FT_CALLBACK_DEF( FT_Error )
tt_cmap13_init( TT_CMap13 cmap,
FT_Byte* table )
{
cmap->cmap.data = table;
table += 12;
cmap->num_groups = FT_PEEK_ULONG( table );
cmap->valid = 0;
return SFNT_Err_Ok;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap13_validate( FT_Byte* table,
FT_Validator valid )
{
FT_Byte* p;
FT_ULong length;
FT_ULong num_groups;
if ( table + 16 > valid->limit )
FT_INVALID_TOO_SHORT;
p = table + 4;
length = TT_NEXT_ULONG( p );
p = table + 12;
num_groups = TT_NEXT_ULONG( p );
if ( length > (FT_ULong)( valid->limit - table ) ||
length < 16 + 12 * num_groups )
FT_INVALID_TOO_SHORT;
/* check groups, they must be in increasing order */
{
FT_ULong n, start, end, glyph_id, last = 0;
for ( n = 0; n < num_groups; n++ )
{
start = TT_NEXT_ULONG( p );
end = TT_NEXT_ULONG( p );
glyph_id = TT_NEXT_ULONG( p );
if ( start > end )
FT_INVALID_DATA;
if ( n > 0 && start <= last )
FT_INVALID_DATA;
if ( valid->level >= FT_VALIDATE_TIGHT )
{
if ( glyph_id >= TT_VALID_GLYPH_COUNT( valid ) )
FT_INVALID_GLYPH_ID;
}
last = end;
}
}
return SFNT_Err_Ok;
}
/* search the index of the charcode next to cmap->cur_charcode */
/* cmap->cur_group should be set up properly by caller */
/* */
static void
tt_cmap13_next( TT_CMap13 cmap )
{
FT_Byte* p;
FT_ULong start, end, glyph_id, char_code;
FT_ULong n;
FT_UInt gindex;
if ( cmap->cur_charcode >= 0xFFFFFFFFUL )
goto Fail;
char_code = cmap->cur_charcode + 1;
n = cmap->cur_group;
for ( n = cmap->cur_group; n < cmap->num_groups; n++ )
{
p = cmap->cmap.data + 16 + 12 * n;
start = TT_NEXT_ULONG( p );
end = TT_NEXT_ULONG( p );
glyph_id = TT_PEEK_ULONG( p );
if ( char_code < start )
char_code = start;
if ( char_code <= end )
{
gindex = (FT_UInt)glyph_id;
if ( gindex )
{
cmap->cur_charcode = char_code;;
cmap->cur_gindex = gindex;
cmap->cur_group = n;
return;
}
}
}
Fail:
cmap->valid = 0;
}
static FT_UInt
tt_cmap13_char_map_binary( TT_CMap cmap,
FT_UInt32* pchar_code,
FT_Bool next )
{
FT_UInt gindex = 0;
FT_Byte* p = cmap->data + 12;
FT_UInt32 num_groups = TT_PEEK_ULONG( p );
FT_UInt32 char_code = *pchar_code;
FT_UInt32 start, end;
FT_UInt32 max, min, mid;
if ( !num_groups )
return 0;
/* make compiler happy */
mid = num_groups;
end = 0xFFFFFFFFUL;
if ( next )
char_code++;
min = 0;
max = num_groups;
/* binary search */
while ( min < max )
{
mid = ( min + max ) >> 1;
p = cmap->data + 16 + 12 * mid;
start = TT_NEXT_ULONG( p );
end = TT_NEXT_ULONG( p );
if ( char_code < start )
max = mid;
else if ( char_code > end )
min = mid + 1;
else
{
gindex = (FT_UInt)TT_PEEK_ULONG( p );
break;
}
}
if ( next )
{
TT_CMap13 cmap13 = (TT_CMap13)cmap;
/* if `char_code' is not in any group, then `mid' is */
/* the group nearest to `char_code' */
if ( char_code > end )
{
mid++;
if ( mid == num_groups )
return 0;
}
cmap13->valid = 1;
cmap13->cur_charcode = char_code;
cmap13->cur_group = mid;
if ( !gindex )
{
tt_cmap13_next( cmap13 );
if ( cmap13->valid )
gindex = cmap13->cur_gindex;
}
else
cmap13->cur_gindex = gindex;
if ( gindex )
*pchar_code = cmap13->cur_charcode;
}
return gindex;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap13_char_index( TT_CMap cmap,
FT_UInt32 char_code )
{
return tt_cmap13_char_map_binary( cmap, &char_code, 0 );
}
FT_CALLBACK_DEF( FT_UInt32 )
tt_cmap13_char_next( TT_CMap cmap,
FT_UInt32 *pchar_code )
{
TT_CMap13 cmap13 = (TT_CMap13)cmap;
FT_UInt gindex;
if ( cmap13->cur_charcode >= 0xFFFFFFFFUL )
return 0;
/* no need to search */
if ( cmap13->valid && cmap13->cur_charcode == *pchar_code )
{
tt_cmap13_next( cmap13 );
if ( cmap13->valid )
{
gindex = cmap13->cur_gindex;
if ( gindex )
*pchar_code = cmap13->cur_charcode;
}
else
gindex = 0;
}
else
gindex = tt_cmap13_char_map_binary( cmap, pchar_code, 1 );
return gindex;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap13_get_info( TT_CMap cmap,
TT_CMapInfo *cmap_info )
{
FT_Byte* p = cmap->data + 8;
cmap_info->format = 13;
cmap_info->language = (FT_ULong)TT_PEEK_ULONG( p );
return SFNT_Err_Ok;
}
FT_DEFINE_TT_CMAP(
tt_cmap13_class_rec,
sizeof ( TT_CMap13Rec ),
(FT_CMap_InitFunc) tt_cmap13_init,
(FT_CMap_DoneFunc) NULL,
(FT_CMap_CharIndexFunc)tt_cmap13_char_index,
(FT_CMap_CharNextFunc) tt_cmap13_char_next,
NULL,
NULL,
NULL,
NULL,
NULL,
13,
(TT_CMap_ValidateFunc)tt_cmap13_validate,
(TT_CMap_Info_GetFunc)tt_cmap13_get_info )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FORMAT 14 *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* TABLE OVERVIEW */
/* -------------- */
/* */
/* NAME OFFSET TYPE DESCRIPTION */
/* */
/* format 0 USHORT must be 14 */
/* length 2 ULONG table length in bytes */
/* numSelector 6 ULONG number of variation sel. records */
/* */
/* Followed by numSelector records, each of which looks like */
/* */
/* varSelector 0 UINT24 Unicode codepoint of sel. */
/* defaultOff 3 ULONG offset to a default UVS table */
/* describing any variants to be found in */
/* the normal Unicode subtable. */
/* nonDefOff 7 ULONG offset to a non-default UVS table */
/* describing any variants not in the */
/* standard cmap, with GIDs here */
/* (either offset may be 0 NULL) */
/* */
/* Selectors are sorted by code point. */
/* */
/* A default Unicode Variation Selector (UVS) subtable is just a list of */
/* ranges of code points which are to be found in the standard cmap. No */
/* glyph IDs (GIDs) here. */
/* */
/* numRanges 0 ULONG number of ranges following */
/* */
/* A range looks like */
/* */
/* uniStart 0 UINT24 code point of the first character in */
/* this range */
/* additionalCnt 3 UBYTE count of additional characters in this */
/* range (zero means a range of a single */
/* character) */
/* */
/* Ranges are sorted by `uniStart'. */
/* */
/* A non-default Unicode Variation Selector (UVS) subtable is a list of */
/* mappings from codepoint to GID. */
/* */
/* numMappings 0 ULONG number of mappings */
/* */
/* A range looks like */
/* */
/* uniStart 0 UINT24 code point of the first character in */
/* this range */
/* GID 3 USHORT and its GID */
/* */
/* Ranges are sorted by `uniStart'. */
typedef struct TT_CMap14Rec_
{
TT_CMapRec cmap;
FT_ULong num_selectors;
/* This array is used to store the results of various
* cmap 14 query functions. The data is overwritten
* on each call to these functions.
*/
FT_UInt32 max_results;
FT_UInt32* results;
FT_Memory memory;
} TT_CMap14Rec, *TT_CMap14;
FT_CALLBACK_DEF( void )
tt_cmap14_done( TT_CMap14 cmap )
{
FT_Memory memory = cmap->memory;
cmap->max_results = 0;
if ( memory != NULL && cmap->results != NULL )
FT_FREE( cmap->results );
}
static FT_Error
tt_cmap14_ensure( TT_CMap14 cmap,
FT_UInt32 num_results,
FT_Memory memory )
{
FT_UInt32 old_max = cmap->max_results;
FT_Error error = SFNT_Err_Ok;
if ( num_results > cmap->max_results )
{
cmap->memory = memory;
if ( FT_QRENEW_ARRAY( cmap->results, old_max, num_results ) )
return error;
cmap->max_results = num_results;
}
return error;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap14_init( TT_CMap14 cmap,
FT_Byte* table )
{
cmap->cmap.data = table;
table += 6;
cmap->num_selectors = FT_PEEK_ULONG( table );
cmap->max_results = 0;
cmap->results = NULL;
return SFNT_Err_Ok;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap14_validate( FT_Byte* table,
FT_Validator valid )
{
FT_Byte* p = table + 2;
FT_ULong length = TT_NEXT_ULONG( p );
FT_ULong num_selectors = TT_NEXT_ULONG( p );
if ( length > (FT_ULong)( valid->limit - table ) ||
length < 10 + 11 * num_selectors )
FT_INVALID_TOO_SHORT;
/* check selectors, they must be in increasing order */
{
/* we start lastVarSel at 1 because a variant selector value of 0
* isn't valid.
*/
FT_ULong n, lastVarSel = 1;
for ( n = 0; n < num_selectors; n++ )
{
FT_ULong varSel = TT_NEXT_UINT24( p );
FT_ULong defOff = TT_NEXT_ULONG( p );
FT_ULong nondefOff = TT_NEXT_ULONG( p );
if ( defOff >= length || nondefOff >= length )
FT_INVALID_TOO_SHORT;
if ( varSel < lastVarSel )
FT_INVALID_DATA;
lastVarSel = varSel + 1;
/* check the default table (these glyphs should be reached */
/* through the normal Unicode cmap, no GIDs, just check order) */
if ( defOff != 0 )
{
FT_Byte* defp = table + defOff;
FT_ULong numRanges = TT_NEXT_ULONG( defp );
FT_ULong i;
FT_ULong lastBase = 0;
if ( defp + numRanges * 4 > valid->limit )
FT_INVALID_TOO_SHORT;
for ( i = 0; i < numRanges; ++i )
{
FT_ULong base = TT_NEXT_UINT24( defp );
FT_ULong cnt = FT_NEXT_BYTE( defp );
/* end of Unicode */
if ( base + cnt >= 0x110000UL )
FT_INVALID_DATA;
if ( base < lastBase )
FT_INVALID_DATA;
lastBase = base + cnt + 1U;
}
}
/* and the non-default table (these glyphs are specified here) */
if ( nondefOff != 0 )
{
FT_Byte* ndp = table + nondefOff;
FT_ULong numMappings = TT_NEXT_ULONG( ndp );
FT_ULong i, lastUni = 0;
if ( numMappings * 4 > (FT_ULong)( valid->limit - ndp ) )
FT_INVALID_TOO_SHORT;
for ( i = 0; i < numMappings; ++i )
{
FT_ULong uni = TT_NEXT_UINT24( ndp );
FT_ULong gid = TT_NEXT_USHORT( ndp );
/* end of Unicode */
if ( uni >= 0x110000UL )
FT_INVALID_DATA;
if ( uni < lastUni )
FT_INVALID_DATA;
lastUni = uni + 1U;
if ( valid->level >= FT_VALIDATE_TIGHT &&
gid >= TT_VALID_GLYPH_COUNT( valid ) )
FT_INVALID_GLYPH_ID;
}
}
}
}
return SFNT_Err_Ok;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap14_char_index( TT_CMap cmap,
FT_UInt32 char_code )
{
FT_UNUSED( cmap );
FT_UNUSED( char_code );
/* This can't happen */
return 0;
}
FT_CALLBACK_DEF( FT_UInt32 )
tt_cmap14_char_next( TT_CMap cmap,
FT_UInt32 *pchar_code )
{
FT_UNUSED( cmap );
/* This can't happen */
*pchar_code = 0;
return 0;
}
FT_CALLBACK_DEF( FT_Error )
tt_cmap14_get_info( TT_CMap cmap,
TT_CMapInfo *cmap_info )
{
FT_UNUSED( cmap );
cmap_info->format = 14;
/* subtable 14 does not define a language field */
cmap_info->language = 0xFFFFFFFFUL;
return SFNT_Err_Ok;
}
static FT_UInt
tt_cmap14_char_map_def_binary( FT_Byte *base,
FT_UInt32 char_code )
{
FT_UInt32 numRanges = TT_PEEK_ULONG( base );
FT_UInt32 max, min;
min = 0;
max = numRanges;
base += 4;
/* binary search */
while ( min < max )
{
FT_UInt32 mid = ( min + max ) >> 1;
FT_Byte* p = base + 4 * mid;
FT_ULong start = TT_NEXT_UINT24( p );
FT_UInt cnt = FT_NEXT_BYTE( p );
if ( char_code < start )
max = mid;
else if ( char_code > start+cnt )
min = mid + 1;
else
return TRUE;
}
return FALSE;
}
static FT_UInt
tt_cmap14_char_map_nondef_binary( FT_Byte *base,
FT_UInt32 char_code )
{
FT_UInt32 numMappings = TT_PEEK_ULONG( base );
FT_UInt32 max, min;
min = 0;
max = numMappings;
base += 4;
/* binary search */
while ( min < max )
{
FT_UInt32 mid = ( min + max ) >> 1;
FT_Byte* p = base + 5 * mid;
FT_UInt32 uni = (FT_UInt32)TT_NEXT_UINT24( p );
if ( char_code < uni )
max = mid;
else if ( char_code > uni )
min = mid + 1;
else
return TT_PEEK_USHORT( p );
}
return 0;
}
static FT_Byte*
tt_cmap14_find_variant( FT_Byte *base,
FT_UInt32 variantCode )
{
FT_UInt32 numVar = TT_PEEK_ULONG( base );
FT_UInt32 max, min;
min = 0;
max = numVar;
base += 4;
/* binary search */
while ( min < max )
{
FT_UInt32 mid = ( min + max ) >> 1;
FT_Byte* p = base + 11 * mid;
FT_ULong varSel = TT_NEXT_UINT24( p );
if ( variantCode < varSel )
max = mid;
else if ( variantCode > varSel )
min = mid + 1;
else
return p;
}
return NULL;
}
FT_CALLBACK_DEF( FT_UInt )
tt_cmap14_char_var_index( TT_CMap cmap,
TT_CMap ucmap,
FT_UInt32 charcode,
FT_UInt32 variantSelector )
{
FT_Byte* p = tt_cmap14_find_variant( cmap->data + 6, variantSelector );
FT_ULong defOff;
FT_ULong nondefOff;
if ( !p )
return 0;
defOff = TT_NEXT_ULONG( p );
nondefOff = TT_PEEK_ULONG( p );
if ( defOff != 0 &&
tt_cmap14_char_map_def_binary( cmap->data + defOff, charcode ) )
{
/* This is the default variant of this charcode. GID not stored */
/* here; stored in the normal Unicode charmap instead. */
return ucmap->cmap.clazz->char_index( &ucmap->cmap, charcode );
}
if ( nondefOff != 0 )
return tt_cmap14_char_map_nondef_binary( cmap->data + nondefOff,
charcode );
return 0;
}
FT_CALLBACK_DEF( FT_Int )
tt_cmap14_char_var_isdefault( TT_CMap cmap,
FT_UInt32 charcode,
FT_UInt32 variantSelector )
{
FT_Byte* p = tt_cmap14_find_variant( cmap->data + 6, variantSelector );
FT_ULong defOff;
FT_ULong nondefOff;
if ( !p )
return -1;
defOff = TT_NEXT_ULONG( p );
nondefOff = TT_NEXT_ULONG( p );
if ( defOff != 0 &&
tt_cmap14_char_map_def_binary( cmap->data + defOff, charcode ) )
return 1;
if ( nondefOff != 0 &&
tt_cmap14_char_map_nondef_binary( cmap->data + nondefOff,
charcode ) != 0 )
return 0;
return -1;
}
FT_CALLBACK_DEF( FT_UInt32* )
tt_cmap14_variants( TT_CMap cmap,
FT_Memory memory )
{
TT_CMap14 cmap14 = (TT_CMap14)cmap;
FT_UInt32 count = cmap14->num_selectors;
FT_Byte* p = cmap->data + 10;
FT_UInt32* result;
FT_UInt32 i;
if ( tt_cmap14_ensure( cmap14, ( count + 1 ), memory ) )
return NULL;
result = cmap14->results;
for ( i = 0; i < count; ++i )
{
result[i] = (FT_UInt32)TT_NEXT_UINT24( p );
p += 8;
}
result[i] = 0;
return result;
}
FT_CALLBACK_DEF( FT_UInt32 * )
tt_cmap14_char_variants( TT_CMap cmap,
FT_Memory memory,
FT_UInt32 charCode )
{
TT_CMap14 cmap14 = (TT_CMap14) cmap;
FT_UInt32 count = cmap14->num_selectors;
FT_Byte* p = cmap->data + 10;
FT_UInt32* q;
if ( tt_cmap14_ensure( cmap14, ( count + 1 ), memory ) )
return NULL;
for ( q = cmap14->results; count > 0; --count )
{
FT_UInt32 varSel = TT_NEXT_UINT24( p );
FT_ULong defOff = TT_NEXT_ULONG( p );
FT_ULong nondefOff = TT_NEXT_ULONG( p );
if ( ( defOff != 0 &&
tt_cmap14_char_map_def_binary( cmap->data + defOff,
charCode ) ) ||
( nondefOff != 0 &&
tt_cmap14_char_map_nondef_binary( cmap->data + nondefOff,
charCode ) != 0 ) )
{
q[0] = varSel;
q++;
}
}
q[0] = 0;
return cmap14->results;
}
static FT_UInt
tt_cmap14_def_char_count( FT_Byte *p )
{
FT_UInt32 numRanges = (FT_UInt32)TT_NEXT_ULONG( p );
FT_UInt tot = 0;
/* point to the first `cnt' field */
p += 3;
for ( ; numRanges > 0; numRanges-- )
{
tot += 1 + p[0];
p += 4;
}
return tot;
}
static FT_UInt32*
tt_cmap14_get_def_chars( TT_CMap cmap,
FT_Byte* p,
FT_Memory memory )
{
TT_CMap14 cmap14 = (TT_CMap14) cmap;
FT_UInt32 numRanges;
FT_UInt cnt;
FT_UInt32* q;
cnt = tt_cmap14_def_char_count( p );
numRanges = (FT_UInt32)TT_NEXT_ULONG( p );
if ( tt_cmap14_ensure( cmap14, ( cnt + 1 ), memory ) )
return NULL;
for ( q = cmap14->results; numRanges > 0; --numRanges )
{
FT_UInt32 uni = (FT_UInt32)TT_NEXT_UINT24( p );
cnt = FT_NEXT_BYTE( p ) + 1;
do
{
q[0] = uni;
uni += 1;
q += 1;
} while ( --cnt != 0 );
}
q[0] = 0;
return cmap14->results;
}
static FT_UInt32*
tt_cmap14_get_nondef_chars( TT_CMap cmap,
FT_Byte *p,
FT_Memory memory )
{
TT_CMap14 cmap14 = (TT_CMap14) cmap;
FT_UInt32 numMappings;
FT_UInt i;
FT_UInt32 *ret;
numMappings = (FT_UInt32)TT_NEXT_ULONG( p );
if ( tt_cmap14_ensure( cmap14, ( numMappings + 1 ), memory ) )
return NULL;
ret = cmap14->results;
for ( i = 0; i < numMappings; ++i )
{
ret[i] = (FT_UInt32)TT_NEXT_UINT24( p );
p += 2;
}
ret[i] = 0;
return ret;
}
FT_CALLBACK_DEF( FT_UInt32 * )
tt_cmap14_variant_chars( TT_CMap cmap,
FT_Memory memory,
FT_UInt32 variantSelector )
{
FT_Byte *p = tt_cmap14_find_variant( cmap->data + 6,
variantSelector );
FT_UInt32 *ret;
FT_Int i;
FT_ULong defOff;
FT_ULong nondefOff;
if ( !p )
return NULL;
defOff = TT_NEXT_ULONG( p );
nondefOff = TT_NEXT_ULONG( p );
if ( defOff == 0 && nondefOff == 0 )
return NULL;
if ( defOff == 0 )
return tt_cmap14_get_nondef_chars( cmap, cmap->data + nondefOff,
memory );
else if ( nondefOff == 0 )
return tt_cmap14_get_def_chars( cmap, cmap->data + defOff,
memory );
else
{
/* Both a default and a non-default glyph set? That's probably not */
/* good font design, but the spec allows for it... */
TT_CMap14 cmap14 = (TT_CMap14) cmap;
FT_UInt32 numRanges;
FT_UInt32 numMappings;
FT_UInt32 duni;
FT_UInt32 dcnt;
FT_UInt32 nuni;
FT_Byte* dp;
FT_UInt di, ni, k;
p = cmap->data + nondefOff;
dp = cmap->data + defOff;
numMappings = (FT_UInt32)TT_NEXT_ULONG( p );
dcnt = tt_cmap14_def_char_count( dp );
numRanges = (FT_UInt32)TT_NEXT_ULONG( dp );
if ( numMappings == 0 )
return tt_cmap14_get_def_chars( cmap, cmap->data + defOff,
memory );
if ( dcnt == 0 )
return tt_cmap14_get_nondef_chars( cmap, cmap->data + nondefOff,
memory );
if ( tt_cmap14_ensure( cmap14, ( dcnt + numMappings + 1 ), memory ) )
return NULL;
ret = cmap14->results;
duni = (FT_UInt32)TT_NEXT_UINT24( dp );
dcnt = FT_NEXT_BYTE( dp );
di = 1;
nuni = (FT_UInt32)TT_NEXT_UINT24( p );
p += 2;
ni = 1;
i = 0;
for ( ;; )
{
if ( nuni > duni + dcnt )
{
for ( k = 0; k <= dcnt; ++k )
ret[i++] = duni + k;
++di;
if ( di > numRanges )
break;
duni = (FT_UInt32)TT_NEXT_UINT24( dp );
dcnt = FT_NEXT_BYTE( dp );
}
else
{
if ( nuni < duni )
ret[i++] = nuni;
/* If it is within the default range then ignore it -- */
/* that should not have happened */
++ni;
if ( ni > numMappings )
break;
nuni = (FT_UInt32)TT_NEXT_UINT24( p );
p += 2;
}
}
if ( ni <= numMappings )
{
/* If we get here then we have run out of all default ranges. */
/* We have read one non-default mapping which we haven't stored */
/* and there may be others that need to be read. */
ret[i++] = nuni;
while ( ni < numMappings )
{
ret[i++] = (FT_UInt32)TT_NEXT_UINT24( p );
p += 2;
++ni;
}
}
else if ( di <= numRanges )
{
/* If we get here then we have run out of all non-default */
/* mappings. We have read one default range which we haven't */
/* stored and there may be others that need to be read. */
for ( k = 0; k <= dcnt; ++k )
ret[i++] = duni + k;
while ( di < numRanges )
{
duni = (FT_UInt32)TT_NEXT_UINT24( dp );
dcnt = FT_NEXT_BYTE( dp );
for ( k = 0; k <= dcnt; ++k )
ret[i++] = duni + k;
++di;
}
}
ret[i] = 0;
return ret;
}
}
FT_DEFINE_TT_CMAP(
tt_cmap14_class_rec,
sizeof ( TT_CMap14Rec ),
(FT_CMap_InitFunc) tt_cmap14_init,
(FT_CMap_DoneFunc) tt_cmap14_done,
(FT_CMap_CharIndexFunc)tt_cmap14_char_index,
(FT_CMap_CharNextFunc) tt_cmap14_char_next,
/* Format 14 extension functions */
(FT_CMap_CharVarIndexFunc) tt_cmap14_char_var_index,
(FT_CMap_CharVarIsDefaultFunc)tt_cmap14_char_var_isdefault,
(FT_CMap_VariantListFunc) tt_cmap14_variants,
(FT_CMap_CharVariantListFunc) tt_cmap14_char_variants,
(FT_CMap_VariantCharListFunc) tt_cmap14_variant_chars,
14,
(TT_CMap_ValidateFunc)tt_cmap14_validate,
(TT_CMap_Info_GetFunc)tt_cmap14_get_info )
static const TT_CMap_Class tt_cmap_classes[] =
{
#define TTCMAPCITEM( a ) &a,
/***************************************************************************/
/* */
/* ttcmapc.h */
/* */
/* TT CMAP classes definitions (specification only). */
/* */
/* Copyright 2009 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
TTCMAPCITEM( tt_cmap0_class_rec )
TTCMAPCITEM( tt_cmap2_class_rec )
TTCMAPCITEM( tt_cmap4_class_rec )
TTCMAPCITEM( tt_cmap6_class_rec )
TTCMAPCITEM( tt_cmap8_class_rec )
TTCMAPCITEM( tt_cmap10_class_rec )
TTCMAPCITEM( tt_cmap12_class_rec )
TTCMAPCITEM( tt_cmap13_class_rec )
TTCMAPCITEM( tt_cmap14_class_rec )
/* END */
NULL,
};
/* parse the `cmap' table and build the corresponding TT_CMap objects */
/* in the current face */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_build_cmaps( TT_Face face )
{
FT_Byte* table = face->cmap_table;
FT_Byte* limit = table + face->cmap_size;
FT_UInt volatile num_cmaps;
FT_Byte* volatile p = table;
FT_Library library = FT_FACE_LIBRARY( face );
FT_UNUSED( library );
if ( !p || p + 4 > limit )
return SFNT_Err_Invalid_Table;
/* only recognize format 0 */
if ( TT_NEXT_USHORT( p ) != 0 )
{
p -= 2;
FT_ERROR(( "tt_face_build_cmaps:"
" unsupported `cmap' table format = %d\n",
TT_PEEK_USHORT( p ) ));
return SFNT_Err_Invalid_Table;
}
num_cmaps = TT_NEXT_USHORT( p );
#ifdef FT_MAX_CHARMAP_CACHEABLE
if ( num_cmaps > FT_MAX_CHARMAP_CACHEABLE )
FT_ERROR(( "tt_face_build_cmaps: too many cmap subtables (%d)\n"
" subtable #%d and higher are loaded"
" but cannot be searched\n",
num_cmaps, FT_MAX_CHARMAP_CACHEABLE + 1 ));
#endif
for ( ; num_cmaps > 0 && p + 8 <= limit; num_cmaps-- )
{
FT_CharMapRec charmap;
FT_UInt32 offset;
charmap.platform_id = TT_NEXT_USHORT( p );
charmap.encoding_id = TT_NEXT_USHORT( p );
charmap.face = FT_FACE( face );
/* will be filled later */
charmap.encoding = FT_ENCODING_NONE;
offset = TT_NEXT_ULONG( p );
if ( offset && offset <= face->cmap_size - 2 )
{
FT_Byte* volatile cmap = table + offset;
volatile FT_UInt format = TT_PEEK_USHORT( cmap );
const TT_CMap_Class* volatile pclazz = TT_CMAP_CLASSES_GET;
TT_CMap_Class volatile clazz;
for ( ; *pclazz; pclazz++ )
{
clazz = *pclazz;
if ( clazz->format == format )
{
volatile TT_ValidatorRec valid;
volatile FT_Error error = SFNT_Err_Ok;
ft_validator_init( FT_VALIDATOR( &valid ), cmap, limit,
FT_VALIDATE_DEFAULT );
valid.num_glyphs = (FT_UInt)face->max_profile.numGlyphs;
if ( ft_setjmp( FT_VALIDATOR( &valid )->jump_buffer) == 0 )
{
/* validate this cmap sub-table */
error = clazz->validate( cmap, FT_VALIDATOR( &valid ) );
}
if ( valid.validator.error == 0 )
{
FT_CMap ttcmap;
/* It might make sense to store the single variation */
/* selector cmap somewhere special. But it would have to be */
/* in the public FT_FaceRec, and we can't change that. */
if ( !FT_CMap_New( (FT_CMap_Class)clazz,
cmap, &charmap, &ttcmap ) )
{
/* it is simpler to directly set `flags' than adding */
/* a parameter to FT_CMap_New */
((TT_CMap)ttcmap)->flags = (FT_Int)error;
}
}
else
{
FT_TRACE0(( "tt_face_build_cmaps:"
" broken cmap sub-table ignored\n" ));
}
break;
}
}
if ( *pclazz == NULL )
{
FT_TRACE0(( "tt_face_build_cmaps:"
" unsupported cmap sub-table ignored\n" ));
}
}
}
return SFNT_Err_Ok;
}
FT_LOCAL( FT_Error )
tt_get_cmap_info( FT_CharMap charmap,
TT_CMapInfo *cmap_info )
{
FT_CMap cmap = (FT_CMap)charmap;
TT_CMap_Class clazz = (TT_CMap_Class)cmap->clazz;
return clazz->get_cmap_info( charmap, cmap_info );
}
/* END */
/***************************************************************************/
/* */
/* ttkern.c */
/* */
/* Load the basic TrueType kerning table. This doesn't handle */
/* kerning data within the GPOS table at the moment. */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ttkern.h */
/* */
/* Load the basic TrueType kerning table. This doesn't handle */
/* kerning data within the GPOS table at the moment. */
/* */
/* Copyright 1996-2001, 2002, 2005, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTKERN_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
tt_face_load_kern( TT_Face face,
FT_Stream stream );
FT_LOCAL( void )
tt_face_done_kern( TT_Face face );
FT_LOCAL( FT_Int )
tt_face_get_kerning( TT_Face face,
FT_UInt left_glyph,
FT_UInt right_glyph );
#define TT_FACE_HAS_KERNING( face ) ( (face)->kern_avail_bits != 0 )
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttkern
#undef TT_KERN_INDEX
#define TT_KERN_INDEX( g1, g2 ) ( ( (FT_ULong)(g1) << 16 ) | (g2) )
FT_LOCAL_DEF( FT_Error )
tt_face_load_kern( TT_Face face,
FT_Stream stream )
{
FT_Error error;
FT_ULong table_size;
FT_Byte* p;
FT_Byte* p_limit;
FT_UInt nn, num_tables;
FT_UInt32 avail = 0, ordered = 0;
/* the kern table is optional; exit silently if it is missing */
error = face->goto_table( face, TTAG_kern, stream, &table_size );
if ( error )
goto Exit;
/* the case of a malformed table */
if ( table_size < 4 )
{
FT_ERROR(( "tt_face_load_kern:"
" kerning table is too small - ignored\n" ));
error = SFNT_Err_Table_Missing;
goto Exit;
}
if ( FT_FRAME_EXTRACT( table_size, face->kern_table ) )
{
FT_ERROR(( "tt_face_load_kern:"
" could not extract kerning table\n" ));
goto Exit;
}
face->kern_table_size = table_size;
p = face->kern_table;
p_limit = p + table_size;
/* skip version */
p += 2;
num_tables = FT_NEXT_USHORT( p );
/* we only support up to 32 sub-tables */
if ( num_tables > 32 )
num_tables = 32;
for ( nn = 0; nn < num_tables; nn++ )
{
FT_UInt num_pairs, length, coverage;
FT_Byte* p_next;
FT_UInt32 mask = (FT_UInt32)1UL << nn;
if ( p + 6 > p_limit )
break;
p_next = p;
/* skip version */
p += 2;
length = FT_NEXT_USHORT( p );
coverage = FT_NEXT_USHORT( p );
if ( length <= 6 )
break;
p_next += length;
/* handle broken table */
if ( p_next > p_limit )
p_next = p_limit;
/* only use horizontal kerning tables */
if ( ( coverage & ~8 ) != 0x0001 ||
p + 8 > p_limit )
goto NextTable;
num_pairs = FT_NEXT_USHORT( p );
p += 6;
/* handle broken count */
if ( ( p_next - p ) < 6 * (int)num_pairs )
num_pairs = (FT_UInt)( ( p_next - p ) / 6 );
avail |= mask;
/*
* Now check whether the pairs in this table are ordered.
* We then can use binary search.
*/
if ( num_pairs > 0 )
{
FT_ULong count;
FT_ULong old_pair;
old_pair = FT_NEXT_ULONG( p );
p += 2;
for ( count = num_pairs - 1; count > 0; count-- )
{
FT_UInt32 cur_pair;
cur_pair = FT_NEXT_ULONG( p );
if ( cur_pair <= old_pair )
break;
p += 2;
old_pair = cur_pair;
}
if ( count == 0 )
ordered |= mask;
}
NextTable:
p = p_next;
}
face->num_kern_tables = nn;
face->kern_avail_bits = avail;
face->kern_order_bits = ordered;
Exit:
return error;
}
FT_LOCAL_DEF( void )
tt_face_done_kern( TT_Face face )
{
FT_Stream stream = face->root.stream;
FT_FRAME_RELEASE( face->kern_table );
face->kern_table_size = 0;
face->num_kern_tables = 0;
face->kern_avail_bits = 0;
face->kern_order_bits = 0;
}
FT_LOCAL_DEF( FT_Int )
tt_face_get_kerning( TT_Face face,
FT_UInt left_glyph,
FT_UInt right_glyph )
{
FT_Int result = 0;
FT_UInt count, mask = 1;
FT_Byte* p = face->kern_table;
FT_Byte* p_limit = p + face->kern_table_size;
p += 4;
mask = 0x0001;
for ( count = face->num_kern_tables;
count > 0 && p + 6 <= p_limit;
count--, mask <<= 1 )
{
FT_Byte* base = p;
FT_Byte* next = base;
FT_UInt version = FT_NEXT_USHORT( p );
FT_UInt length = FT_NEXT_USHORT( p );
FT_UInt coverage = FT_NEXT_USHORT( p );
FT_UInt num_pairs;
FT_Int value = 0;
FT_UNUSED( version );
next = base + length;
/* handle broken table */
if ( next > p_limit )
next = p_limit;
if ( ( face->kern_avail_bits & mask ) == 0 )
goto NextTable;
if ( p + 8 > next )
goto NextTable;
num_pairs = FT_NEXT_USHORT( p );
p += 6;
/* handle broken count */
if ( ( next - p ) < 6 * (int)num_pairs )
num_pairs = (FT_UInt)( ( next - p ) / 6 );
switch ( coverage >> 8 )
{
case 0:
{
FT_ULong key0 = TT_KERN_INDEX( left_glyph, right_glyph );
/* binary search */
if ( face->kern_order_bits & mask )
{
FT_UInt min = 0;
FT_UInt max = num_pairs;
while ( min < max )
{
FT_UInt mid = ( min + max ) >> 1;
FT_Byte* q = p + 6 * mid;
FT_ULong key;
key = FT_NEXT_ULONG( q );
if ( key == key0 )
{
value = FT_PEEK_SHORT( q );
goto Found;
}
if ( key < key0 )
min = mid + 1;
else
max = mid;
}
}
/* linear search */
else
{
FT_UInt count2;
for ( count2 = num_pairs; count2 > 0; count2-- )
{
FT_ULong key = FT_NEXT_ULONG( p );
if ( key == key0 )
{
value = FT_PEEK_SHORT( p );
goto Found;
}
p += 2;
}
}
}
break;
/*
* We don't support format 2 because we haven't seen a single font
* using it in real life...
*/
default:
;
}
goto NextTable;
Found:
/* override or add */
if ( coverage & 8 )
result = value;
else
result += value;
NextTable:
p = next;
}
return result;
}
#undef TT_KERN_INDEX
/* END */
/***************************************************************************/
/* */
/* sfobjs.c */
/* */
/* SFNT object management (base). */
/* */
/* Copyright 1996-2008, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* sfobjs.h */
/* */
/* SFNT object management (specification). */
/* */
/* Copyright 1996-2001, 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SFOBJS_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
sfnt_init_face( FT_Stream stream,
TT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
FT_LOCAL( FT_Error )
sfnt_load_face( FT_Stream stream,
TT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
FT_LOCAL( void )
sfnt_done_face( TT_Face face );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ttbdf.h */
/* */
/* TrueType and OpenType embedded BDF properties (specification). */
/* */
/* Copyright 2005 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTBDF_H__
FT_BEGIN_HEADER
FT_LOCAL( void )
tt_face_free_bdf_props( TT_Face face );
FT_LOCAL( FT_Error )
tt_face_find_bdf_prop( TT_Face face,
const char* property_name,
BDF_PropertyRec *aprop );
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_sfobjs
/* convert a UTF-16 name entry to ASCII */
static FT_String*
tt_name_entry_ascii_from_utf16( TT_NameEntry entry,
FT_Memory memory )
{
FT_String* string = NULL;
FT_UInt len, code, n;
FT_Byte* read = (FT_Byte*)entry->string;
FT_Error error;
len = (FT_UInt)entry->stringLength / 2;
if ( FT_NEW_ARRAY( string, len + 1 ) )
return NULL;
for ( n = 0; n < len; n++ )
{
code = FT_NEXT_USHORT( read );
if ( code == 0 )
break;
if ( code < 32 || code > 127 )
code = '?';
string[n] = (char)code;
}
string[n] = 0;
return string;
}
/* convert an Apple Roman or symbol name entry to ASCII */
static FT_String*
tt_name_entry_ascii_from_other( TT_NameEntry entry,
FT_Memory memory )
{
FT_String* string = NULL;
FT_UInt len, code, n;
FT_Byte* read = (FT_Byte*)entry->string;
FT_Error error;
len = (FT_UInt)entry->stringLength;
if ( FT_NEW_ARRAY( string, len + 1 ) )
return NULL;
for ( n = 0; n < len; n++ )
{
code = *read++;
if ( code == 0 )
break;
if ( code < 32 || code > 127 )
code = '?';
string[n] = (char)code;
}
string[n] = 0;
return string;
}
typedef FT_String* (*TT_NameEntry_ConvertFunc)( TT_NameEntry entry,
FT_Memory memory );
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_get_name */
/* */
/* <Description> */
/* Returns a given ENGLISH name record in ASCII. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* nameid :: The name id of the name record to return. */
/* */
/* <InOut> */
/* name :: The address of a string pointer. NULL if no name is */
/* present. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
static FT_Error
tt_face_get_name( TT_Face face,
FT_UShort nameid,
FT_String** name )
{
FT_Memory memory = face->root.memory;
FT_Error error = SFNT_Err_Ok;
FT_String* result = NULL;
FT_UShort n;
TT_NameEntryRec* rec;
FT_Int found_apple = -1;
FT_Int found_apple_roman = -1;
FT_Int found_apple_english = -1;
FT_Int found_win = -1;
FT_Int found_unicode = -1;
FT_Bool is_english = 0;
TT_NameEntry_ConvertFunc convert;
FT_ASSERT( name );
rec = face->name_table.names;
for ( n = 0; n < face->num_names; n++, rec++ )
{
/* According to the OpenType 1.3 specification, only Microsoft or */
/* Apple platform IDs might be used in the `name' table. The */
/* `Unicode' platform is reserved for the `cmap' table, and the */
/* `ISO' one is deprecated. */
/* */
/* However, the Apple TrueType specification doesn't say the same */
/* thing and goes to suggest that all Unicode `name' table entries */
/* should be coded in UTF-16 (in big-endian format I suppose). */
/* */
if ( rec->nameID == nameid && rec->stringLength > 0 )
{
switch ( rec->platformID )
{
case TT_PLATFORM_APPLE_UNICODE:
case TT_PLATFORM_ISO:
/* there is `languageID' to check there. We should use this */
/* field only as a last solution when nothing else is */
/* available. */
/* */
found_unicode = n;
break;
case TT_PLATFORM_MACINTOSH:
/* This is a bit special because some fonts will use either */
/* an English language id, or a Roman encoding id, to indicate */
/* the English version of its font name. */
/* */
if ( rec->languageID == TT_MAC_LANGID_ENGLISH )
found_apple_english = n;
else if ( rec->encodingID == TT_MAC_ID_ROMAN )
found_apple_roman = n;
break;
case TT_PLATFORM_MICROSOFT:
/* we only take a non-English name when there is nothing */
/* else available in the font */
/* */
if ( found_win == -1 || ( rec->languageID & 0x3FF ) == 0x009 )
{
switch ( rec->encodingID )
{
case TT_MS_ID_SYMBOL_CS:
case TT_MS_ID_UNICODE_CS:
case TT_MS_ID_UCS_4:
is_english = FT_BOOL( ( rec->languageID & 0x3FF ) == 0x009 );
found_win = n;
break;
default:
;
}
}
break;
default:
;
}
}
}
found_apple = found_apple_roman;
if ( found_apple_english >= 0 )
found_apple = found_apple_english;
/* some fonts contain invalid Unicode or Macintosh formatted entries; */
/* we will thus favor names encoded in Windows formats if available */
/* (provided it is an English name) */
/* */
convert = NULL;
if ( found_win >= 0 && !( found_apple >= 0 && !is_english ) )
{
rec = face->name_table.names + found_win;
switch ( rec->encodingID )
{
/* all Unicode strings are encoded using UTF-16BE */
case TT_MS_ID_UNICODE_CS:
case TT_MS_ID_SYMBOL_CS:
convert = tt_name_entry_ascii_from_utf16;
break;
case TT_MS_ID_UCS_4:
/* Apparently, if this value is found in a name table entry, it is */
/* documented as `full Unicode repertoire'. Experience with the */
/* MsGothic font shipped with Windows Vista shows that this really */
/* means UTF-16 encoded names (UCS-4 values are only used within */
/* charmaps). */
convert = tt_name_entry_ascii_from_utf16;
break;
default:
;
}
}
else if ( found_apple >= 0 )
{
rec = face->name_table.names + found_apple;
convert = tt_name_entry_ascii_from_other;
}
else if ( found_unicode >= 0 )
{
rec = face->name_table.names + found_unicode;
convert = tt_name_entry_ascii_from_utf16;
}
if ( rec && convert )
{
if ( rec->string == NULL )
{
FT_Stream stream = face->name_table.stream;
if ( FT_QNEW_ARRAY ( rec->string, rec->stringLength ) ||
FT_STREAM_SEEK( rec->stringOffset ) ||
FT_STREAM_READ( rec->string, rec->stringLength ) )
{
FT_FREE( rec->string );
rec->stringLength = 0;
result = NULL;
goto Exit;
}
}
result = convert( rec, memory );
}
Exit:
*name = result;
return error;
}
static FT_Encoding
sfnt_find_encoding( int platform_id,
int encoding_id )
{
typedef struct TEncoding_
{
int platform_id;
int encoding_id;
FT_Encoding encoding;
} TEncoding;
static
const TEncoding tt_encodings[] =
{
{ TT_PLATFORM_ISO, -1, FT_ENCODING_UNICODE },
{ TT_PLATFORM_APPLE_UNICODE, -1, FT_ENCODING_UNICODE },
{ TT_PLATFORM_MACINTOSH, TT_MAC_ID_ROMAN, FT_ENCODING_APPLE_ROMAN },
{ TT_PLATFORM_MICROSOFT, TT_MS_ID_SYMBOL_CS, FT_ENCODING_MS_SYMBOL },
{ TT_PLATFORM_MICROSOFT, TT_MS_ID_UCS_4, FT_ENCODING_UNICODE },
{ TT_PLATFORM_MICROSOFT, TT_MS_ID_UNICODE_CS, FT_ENCODING_UNICODE },
{ TT_PLATFORM_MICROSOFT, TT_MS_ID_SJIS, FT_ENCODING_SJIS },
{ TT_PLATFORM_MICROSOFT, TT_MS_ID_GB2312, FT_ENCODING_GB2312 },
{ TT_PLATFORM_MICROSOFT, TT_MS_ID_BIG_5, FT_ENCODING_BIG5 },
{ TT_PLATFORM_MICROSOFT, TT_MS_ID_WANSUNG, FT_ENCODING_WANSUNG },
{ TT_PLATFORM_MICROSOFT, TT_MS_ID_JOHAB, FT_ENCODING_JOHAB }
};
const TEncoding *cur, *limit;
cur = tt_encodings;
limit = cur + sizeof ( tt_encodings ) / sizeof ( tt_encodings[0] );
for ( ; cur < limit; cur++ )
{
if ( cur->platform_id == platform_id )
{
if ( cur->encoding_id == encoding_id ||
cur->encoding_id == -1 )
return cur->encoding;
}
}
return FT_ENCODING_NONE;
}
/* Fill in face->ttc_header. If the font is not a TTC, it is */
/* synthesized into a TTC with one offset table. */
static FT_Error
sfnt_open_font( FT_Stream stream,
TT_Face face )
{
FT_Memory memory = stream->memory;
FT_Error error;
FT_ULong tag, offset;
static const FT_Frame_Field ttc_header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE TTC_HeaderRec
FT_FRAME_START( 8 ),
FT_FRAME_LONG( version ),
/* this is ULong in the specs */
FT_FRAME_LONG( count ),
FT_FRAME_END
};
face->ttc_header.tag = 0;
face->ttc_header.version = 0;
face->ttc_header.count = 0;
offset = FT_STREAM_POS();
if ( FT_READ_ULONG( tag ) )
return error;
if ( tag != 0x00010000UL &&
tag != TTAG_ttcf &&
tag != TTAG_OTTO &&
tag != TTAG_true &&
tag != TTAG_typ1 &&
tag != 0x00020000UL )
{
FT_TRACE2(( " not a font using the SFNT container format\n" ));
return SFNT_Err_Unknown_File_Format;
}
face->ttc_header.tag = TTAG_ttcf;
if ( tag == TTAG_ttcf )
{
FT_Int n;
FT_TRACE3(( "sfnt_open_font: file is a collection\n" ));
if ( FT_STREAM_READ_FIELDS( ttc_header_fields, &face->ttc_header ) )
return error;
if ( face->ttc_header.count == 0 )
return SFNT_Err_Invalid_Table;
/* a rough size estimate: let's conservatively assume that there */
/* is just a single table info in each subfont header (12 + 16*1 = */
/* 28 bytes), thus we have (at least) `12 + 4*count' bytes for the */
/* size of the TTC header plus `28*count' bytes for all subfont */
/* headers */
if ( (FT_ULong)face->ttc_header.count > stream->size / ( 28 + 4 ) )
return SFNT_Err_Array_Too_Large;
/* now read the offsets of each font in the file */
if ( FT_NEW_ARRAY( face->ttc_header.offsets, face->ttc_header.count ) )
return error;
if ( FT_FRAME_ENTER( face->ttc_header.count * 4L ) )
return error;
for ( n = 0; n < face->ttc_header.count; n++ )
face->ttc_header.offsets[n] = FT_GET_ULONG();
FT_FRAME_EXIT();
}
else
{
FT_TRACE3(( "sfnt_open_font: synthesize TTC\n" ));
face->ttc_header.version = 1 << 16;
face->ttc_header.count = 1;
if ( FT_NEW( face->ttc_header.offsets ) )
return error;
face->ttc_header.offsets[0] = offset;
}
return error;
}
FT_LOCAL_DEF( FT_Error )
sfnt_init_face( FT_Stream stream,
TT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
FT_Error error;
FT_Library library = face->root.driver->root.library;
SFNT_Service sfnt;
/* for now, parameters are unused */
FT_UNUSED( num_params );
FT_UNUSED( params );
sfnt = (SFNT_Service)face->sfnt;
if ( !sfnt )
{
sfnt = (SFNT_Service)FT_Get_Module_Interface( library, "sfnt" );
if ( !sfnt )
{
FT_ERROR(( "sfnt_init_face: cannot access `sfnt' module\n" ));
return SFNT_Err_Missing_Module;
}
face->sfnt = sfnt;
face->goto_table = sfnt->goto_table;
}
FT_FACE_FIND_GLOBAL_SERVICE( face, face->psnames, POSTSCRIPT_CMAPS );
FT_TRACE2(( "SFNT driver\n" ));
error = sfnt_open_font( stream, face );
if ( error )
return error;
FT_TRACE2(( "sfnt_init_face: %08p, %ld\n", face, face_index ));
if ( face_index < 0 )
face_index = 0;
if ( face_index >= face->ttc_header.count )
return SFNT_Err_Invalid_Argument;
if ( FT_STREAM_SEEK( face->ttc_header.offsets[face_index] ) )
return error;
/* check that we have a valid TrueType file */
error = sfnt->load_font_dir( face, stream );
if ( error )
return error;
face->root.num_faces = face->ttc_header.count;
face->root.face_index = face_index;
return error;
}
#define LOAD_( x ) \
do { \
FT_TRACE2(( "`" #x "' " )); \
FT_TRACE3(( "-->\n" )); \
\
error = sfnt->load_ ## x( face, stream ); \
\
FT_TRACE2(( "%s\n", ( !error ) \
? "loaded" \
: ( error == SFNT_Err_Table_Missing ) \
? "missing" \
: "failed to load" )); \
FT_TRACE3(( "\n" )); \
} while ( 0 )
#define LOADM_( x, vertical ) \
do { \
FT_TRACE2(( "`%s" #x "' ", \
vertical ? "vertical " : "" )); \
FT_TRACE3(( "-->\n" )); \
\
error = sfnt->load_ ## x( face, stream, vertical ); \
\
FT_TRACE2(( "%s\n", ( !error ) \
? "loaded" \
: ( error == SFNT_Err_Table_Missing ) \
? "missing" \
: "failed to load" )); \
FT_TRACE3(( "\n" )); \
} while ( 0 )
#define GET_NAME( id, field ) \
do { \
error = tt_face_get_name( face, TT_NAME_ID_ ## id, field ); \
if ( error ) \
goto Exit; \
} while ( 0 )
FT_LOCAL_DEF( FT_Error )
sfnt_load_face( FT_Stream stream,
TT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
FT_Error error;
FT_Error psnames_error;
FT_Bool has_outline;
FT_Bool is_apple_sbit;
FT_Bool ignore_preferred_family = FALSE;
FT_Bool ignore_preferred_subfamily = FALSE;
SFNT_Service sfnt = (SFNT_Service)face->sfnt;
FT_UNUSED( face_index );
/* Check parameters */
{
FT_Int i;
for ( i = 0; i < num_params; i++ )
{
if ( params[i].tag == FT_PARAM_TAG_IGNORE_PREFERRED_FAMILY )
ignore_preferred_family = TRUE;
else if ( params[i].tag == FT_PARAM_TAG_IGNORE_PREFERRED_SUBFAMILY )
ignore_preferred_subfamily = TRUE;
}
}
/* Load tables */
/* We now support two SFNT-based bitmapped font formats. They */
/* are recognized easily as they do not include a `glyf' */
/* table. */
/* */
/* The first format comes from Apple, and uses a table named */
/* `bhed' instead of `head' to store the font header (using */
/* the same format). It also doesn't include horizontal and */
/* vertical metrics tables (i.e. `hhea' and `vhea' tables are */
/* missing). */
/* */
/* The other format comes from Microsoft, and is used with */
/* WinCE/PocketPC. It looks like a standard TTF, except that */
/* it doesn't contain outlines. */
/* */
FT_TRACE2(( "sfnt_load_face: %08p\n\n", face ));
/* do we have outlines in there? */
has_outline = FT_BOOL( face->root.internal->incremental_interface != 0 ||
tt_face_lookup_table( face, TTAG_glyf ) != 0 ||
tt_face_lookup_table( face, TTAG_CFF ) != 0 );
is_apple_sbit = 0;
/* if this font doesn't contain outlines, we try to load */
/* a `bhed' table */
if ( !has_outline && sfnt->load_bhed )
{
LOAD_( bhed );
is_apple_sbit = FT_BOOL( !error );
}
/* load the font header (`head' table) if this isn't an Apple */
/* sbit font file */
if ( !is_apple_sbit )
{
LOAD_( head );
if ( error )
goto Exit;
}
if ( face->header.Units_Per_EM == 0 )
{
error = SFNT_Err_Invalid_Table;
goto Exit;
}
/* the following tables are often not present in embedded TrueType */
/* fonts within PDF documents, so don't check for them. */
LOAD_( maxp );
LOAD_( cmap );
/* the following tables are optional in PCL fonts -- */
/* don't check for errors */
LOAD_( name );
LOAD_( post );
psnames_error = error;
/* do not load the metrics headers and tables if this is an Apple */
/* sbit font file */
if ( !is_apple_sbit )
{
/* load the `hhea' and `hmtx' tables */
LOADM_( hhea, 0 );
if ( !error )
{
LOADM_( hmtx, 0 );
if ( error == SFNT_Err_Table_Missing )
{
error = SFNT_Err_Hmtx_Table_Missing;
/* If this is an incrementally loaded font and there are */
/* overriding metrics, tolerate a missing `hmtx' table. */
if ( face->root.internal->incremental_interface &&
face->root.internal->incremental_interface->funcs->
get_glyph_metrics )
{
face->horizontal.number_Of_HMetrics = 0;
error = SFNT_Err_Ok;
}
}
}
else if ( error == SFNT_Err_Table_Missing )
{
/* No `hhea' table necessary for SFNT Mac fonts. */
if ( face->format_tag == TTAG_true )
{
FT_TRACE2(( "This is an SFNT Mac font.\n" ));
has_outline = 0;
error = SFNT_Err_Ok;
}
else
{
error = SFNT_Err_Horiz_Header_Missing;
/* If this is an incrementally loaded font and there are */
/* overriding metrics, tolerate a missing `hhea' table. */
if ( face->root.internal->incremental_interface &&
face->root.internal->incremental_interface->funcs->
get_glyph_metrics )
{
face->horizontal.number_Of_HMetrics = 0;
error = SFNT_Err_Ok;
}
}
}
if ( error )
goto Exit;
/* try to load the `vhea' and `vmtx' tables */
LOADM_( hhea, 1 );
if ( !error )
{
LOADM_( hmtx, 1 );
if ( !error )
face->vertical_info = 1;
}
if ( error && error != SFNT_Err_Table_Missing )
goto Exit;
LOAD_( os2 );
if ( error )
{
/* we treat the table as missing if there are any errors */
face->os2.version = 0xFFFFU;
}
}
/* the optional tables */
/* embedded bitmap support */
if ( sfnt->load_eblc )
{
LOAD_( eblc );
if ( error )
{
/* a font which contains neither bitmaps nor outlines is */
/* still valid (although rather useless in most cases); */
/* however, you can find such stripped fonts in PDFs */
if ( error == SFNT_Err_Table_Missing )
error = SFNT_Err_Ok;
else
goto Exit;
}
}
LOAD_( pclt );
if ( error )
{
if ( error != SFNT_Err_Table_Missing )
goto Exit;
face->pclt.Version = 0;
}
/* consider the kerning and gasp tables as optional */
LOAD_( gasp );
LOAD_( kern );
face->root.num_glyphs = face->max_profile.numGlyphs;
/* Bit 8 of the `fsSelection' field in the `OS/2' table denotes */
/* a WWS-only font face. `WWS' stands for `weight', width', and */
/* `slope', a term used by Microsoft's Windows Presentation */
/* Foundation (WPF). This flag has been introduced in version */
/* 1.5 of the OpenType specification (May 2008). */
face->root.family_name = NULL;
face->root.style_name = NULL;
if ( face->os2.version != 0xFFFFU && face->os2.fsSelection & 256 )
{
if ( !ignore_preferred_family )
GET_NAME( PREFERRED_FAMILY, &face->root.family_name );
if ( !face->root.family_name )
GET_NAME( FONT_FAMILY, &face->root.family_name );
if ( !ignore_preferred_subfamily )
GET_NAME( PREFERRED_SUBFAMILY, &face->root.style_name );
if ( !face->root.style_name )
GET_NAME( FONT_SUBFAMILY, &face->root.style_name );
}
else
{
GET_NAME( WWS_FAMILY, &face->root.family_name );
if ( !face->root.family_name && !ignore_preferred_family )
GET_NAME( PREFERRED_FAMILY, &face->root.family_name );
if ( !face->root.family_name )
GET_NAME( FONT_FAMILY, &face->root.family_name );
GET_NAME( WWS_SUBFAMILY, &face->root.style_name );
if ( !face->root.style_name && !ignore_preferred_subfamily )
GET_NAME( PREFERRED_SUBFAMILY, &face->root.style_name );
if ( !face->root.style_name )
GET_NAME( FONT_SUBFAMILY, &face->root.style_name );
}
/* now set up root fields */
{
FT_Face root = &face->root;
FT_Long flags = root->face_flags;
/*********************************************************************/
/* */
/* Compute face flags. */
/* */
if ( has_outline == TRUE )
/* scalable outlines */
flags |= FT_FACE_FLAG_SCALABLE;
/* The sfnt driver only supports bitmap fonts natively, thus we */
/* don't set FT_FACE_FLAG_HINTER. */
/* SFNT file format */
flags |= FT_FACE_FLAG_SFNT |
/* horizontal data */
FT_FACE_FLAG_HORIZONTAL;
if ( psnames_error == SFNT_Err_Ok &&
face->postscript.FormatType != 0x00030000L )
flags |= FT_FACE_FLAG_GLYPH_NAMES;
/* fixed width font? */
if ( face->postscript.isFixedPitch )
flags |= FT_FACE_FLAG_FIXED_WIDTH;
/* vertical information? */
if ( face->vertical_info )
flags |= FT_FACE_FLAG_VERTICAL;
/* kerning available ? */
if ( TT_FACE_HAS_KERNING( face ) )
flags |= FT_FACE_FLAG_KERNING;
/* Don't bother to load the tables unless somebody asks for them. */
/* No need to do work which will (probably) not be used. */
if ( tt_face_lookup_table( face, TTAG_glyf ) != 0 &&
tt_face_lookup_table( face, TTAG_fvar ) != 0 &&
tt_face_lookup_table( face, TTAG_gvar ) != 0 )
flags |= FT_FACE_FLAG_MULTIPLE_MASTERS;
root->face_flags = flags;
/*********************************************************************/
/* */
/* Compute style flags. */
/* */
flags = 0;
if ( has_outline == TRUE && face->os2.version != 0xFFFFU )
{
/* We have an OS/2 table; use the `fsSelection' field. Bit 9 */
/* indicates an oblique font face. This flag has been */
/* introduced in version 1.5 of the OpenType specification. */
/* bit 9 */
if ( face->os2.fsSelection & 512 )
flags |= FT_STYLE_FLAG_ITALIC;
/* bit 0 */
else if ( face->os2.fsSelection & 1 )
flags |= FT_STYLE_FLAG_ITALIC;
/* bit 5 */
if ( face->os2.fsSelection & 32 )
flags |= FT_STYLE_FLAG_BOLD;
}
else
{
/* this is an old Mac font, use the header field */
if ( face->header.Mac_Style & 1 )
flags |= FT_STYLE_FLAG_BOLD;
if ( face->header.Mac_Style & 2 )
flags |= FT_STYLE_FLAG_ITALIC;
}
root->style_flags = flags;
/*********************************************************************/
/* */
/* Polish the charmaps. */
/* */
/* Try to set the charmap encoding according to the platform & */
/* encoding ID of each charmap. */
/* */
/* ignore errors */
tt_face_build_cmaps( face );
/* set the encoding fields */
{
FT_Int m;
for ( m = 0; m < root->num_charmaps; m++ )
{
FT_CharMap charmap = root->charmaps[m];
charmap->encoding = sfnt_find_encoding( charmap->platform_id,
charmap->encoding_id );
#if 0
if ( root->charmap == NULL &&
charmap->encoding == FT_ENCODING_UNICODE )
{
/* set 'root->charmap' to the first Unicode encoding we find */
root->charmap = charmap;
}
#endif
}
}
/*
* Now allocate the root array of FT_Bitmap_Size records and
* populate them. Unfortunately, it isn't possible to indicate bit
* depths in the FT_Bitmap_Size record. This is a design error.
*/
{
FT_UInt i, count;
count = face->sbit_num_strikes;
if ( count > 0 )
{
FT_Memory memory = face->root.stream->memory;
FT_UShort em_size = face->header.Units_Per_EM;
FT_Short avgwidth = face->os2.xAvgCharWidth;
FT_Size_Metrics metrics;
if ( em_size == 0 || face->os2.version == 0xFFFFU )
{
avgwidth = 0;
em_size = 1;
}
if ( FT_NEW_ARRAY( root->available_sizes, count ) )
goto Exit;
for ( i = 0; i < count; i++ )
{
FT_Bitmap_Size* bsize = root->available_sizes + i;
error = sfnt->load_strike_metrics( face, i, &metrics );
if ( error )
goto Exit;
bsize->height = (FT_Short)( metrics.height >> 6 );
bsize->width = (FT_Short)(
( avgwidth * metrics.x_ppem + em_size / 2 ) / em_size );
bsize->x_ppem = metrics.x_ppem << 6;
bsize->y_ppem = metrics.y_ppem << 6;
/* assume 72dpi */
bsize->size = metrics.y_ppem << 6;
}
root->face_flags |= FT_FACE_FLAG_FIXED_SIZES;
root->num_fixed_sizes = (FT_Int)count;
}
}
/* a font with no bitmaps and no outlines is scalable; */
/* it has only empty glyphs then */
if ( !FT_HAS_FIXED_SIZES( root ) && !FT_IS_SCALABLE( root ) )
root->face_flags |= FT_FACE_FLAG_SCALABLE;
/*********************************************************************/
/* */
/* Set up metrics. */
/* */
if ( FT_IS_SCALABLE( root ) )
{
/* XXX What about if outline header is missing */
/* (e.g. sfnt wrapped bitmap)? */
root->bbox.xMin = face->header.xMin;
root->bbox.yMin = face->header.yMin;
root->bbox.xMax = face->header.xMax;
root->bbox.yMax = face->header.yMax;
root->units_per_EM = face->header.Units_Per_EM;
/* XXX: Computing the ascender/descender/height is very different */
/* from what the specification tells you. Apparently, we */
/* must be careful because */
/* */
/* - not all fonts have an OS/2 table; in this case, we take */
/* the values in the horizontal header. However, these */
/* values very often are not reliable. */
/* */
/* - otherwise, the correct typographic values are in the */
/* sTypoAscender, sTypoDescender & sTypoLineGap fields. */
/* */
/* However, certain fonts have these fields set to 0. */
/* Rather, they have usWinAscent & usWinDescent correctly */
/* set (but with different values). */
/* */
/* As an example, Arial Narrow is implemented through four */
/* files ARIALN.TTF, ARIALNI.TTF, ARIALNB.TTF & ARIALNBI.TTF */
/* */
/* Strangely, all fonts have the same values in their */
/* sTypoXXX fields, except ARIALNB which sets them to 0. */
/* */
/* On the other hand, they all have different */
/* usWinAscent/Descent values -- as a conclusion, the OS/2 */
/* table cannot be used to compute the text height reliably! */
/* */
/* The ascender and descender are taken from the `hhea' table. */
/* If zero, they are taken from the `OS/2' table. */
root->ascender = face->horizontal.Ascender;
root->descender = face->horizontal.Descender;
root->height = (FT_Short)( root->ascender - root->descender +
face->horizontal.Line_Gap );
if ( !( root->ascender || root->descender ) )
{
if ( face->os2.version != 0xFFFFU )
{
if ( face->os2.sTypoAscender || face->os2.sTypoDescender )
{
root->ascender = face->os2.sTypoAscender;
root->descender = face->os2.sTypoDescender;
root->height = (FT_Short)( root->ascender - root->descender +
face->os2.sTypoLineGap );
}
else
{
root->ascender = (FT_Short)face->os2.usWinAscent;
root->descender = -(FT_Short)face->os2.usWinDescent;
root->height = (FT_UShort)( root->ascender - root->descender );
}
}
}
root->max_advance_width = face->horizontal.advance_Width_Max;
root->max_advance_height = (FT_Short)( face->vertical_info
? face->vertical.advance_Height_Max
: root->height );
/* See http://www.microsoft.com/OpenType/OTSpec/post.htm -- */
/* Adjust underline position from top edge to centre of */
/* stroke to convert TrueType meaning to FreeType meaning. */
root->underline_position = face->postscript.underlinePosition -
face->postscript.underlineThickness / 2;
root->underline_thickness = face->postscript.underlineThickness;
}
}
Exit:
FT_TRACE2(( "sfnt_load_face: done\n" ));
return error;
}
#undef LOAD_
#undef LOADM_
#undef GET_NAME
FT_LOCAL_DEF( void )
sfnt_done_face( TT_Face face )
{
FT_Memory memory;
SFNT_Service sfnt;
if ( !face )
return;
memory = face->root.memory;
sfnt = (SFNT_Service)face->sfnt;
if ( sfnt )
{
/* destroy the postscript names table if it is loaded */
if ( sfnt->free_psnames )
sfnt->free_psnames( face );
/* destroy the embedded bitmaps table if it is loaded */
if ( sfnt->free_eblc )
sfnt->free_eblc( face );
}
/* freeing the embedded BDF properties */
tt_face_free_bdf_props( face );
/* freeing the kerning table */
tt_face_done_kern( face );
/* freeing the collection table */
FT_FREE( face->ttc_header.offsets );
face->ttc_header.count = 0;
/* freeing table directory */
FT_FREE( face->dir_tables );
face->num_tables = 0;
{
FT_Stream stream = FT_FACE_STREAM( face );
/* simply release the 'cmap' table frame */
FT_FRAME_RELEASE( face->cmap_table );
face->cmap_size = 0;
}
/* freeing the horizontal metrics */
{
FT_Stream stream = FT_FACE_STREAM( face );
FT_FRAME_RELEASE( face->horz_metrics );
FT_FRAME_RELEASE( face->vert_metrics );
face->horz_metrics_size = 0;
face->vert_metrics_size = 0;
}
/* freeing the vertical ones, if any */
if ( face->vertical_info )
{
FT_FREE( face->vertical.long_metrics );
FT_FREE( face->vertical.short_metrics );
face->vertical_info = 0;
}
/* freeing the gasp table */
FT_FREE( face->gasp.gaspRanges );
face->gasp.numRanges = 0;
/* freeing the name table */
if ( sfnt )
sfnt->free_name( face );
/* freeing family and style name */
FT_FREE( face->root.family_name );
FT_FREE( face->root.style_name );
/* freeing sbit size table */
FT_FREE( face->root.available_sizes );
face->root.num_fixed_sizes = 0;
FT_FREE( face->postscript_name );
face->sfnt = 0;
}
/* END */
/***************************************************************************/
/* */
/* sfdriver.c */
/* */
/* High-level SFNT driver interface (body). */
/* */
/* Copyright 1996-2007, 2009-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* sfdriver.h */
/* */
/* High-level SFNT driver interface (specification). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __SFDRIVER_H__
FT_BEGIN_HEADER
FT_DECLARE_MODULE( sfnt_module_class )
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ttsbit.h */
/* */
/* TrueType and OpenType embedded bitmap support (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTSBIT_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
tt_face_load_eblc( TT_Face face,
FT_Stream stream );
FT_LOCAL( void )
tt_face_free_eblc( TT_Face face );
FT_LOCAL( FT_Error )
tt_face_set_sbit_strike( TT_Face face,
FT_Size_Request req,
FT_ULong* astrike_index );
FT_LOCAL( FT_Error )
tt_face_load_strike_metrics( TT_Face face,
FT_ULong strike_index,
FT_Size_Metrics* metrics );
FT_LOCAL( FT_Error )
tt_face_load_sbit_image( TT_Face face,
FT_ULong strike_index,
FT_UInt glyph_index,
FT_UInt load_flags,
FT_Stream stream,
FT_Bitmap *map,
TT_SBit_MetricsRec *metrics );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ttpost.h */
/* */
/* Postcript name table processing for TrueType and OpenType fonts */
/* (specification). */
/* */
/* Copyright 1996-2001, 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTPOST_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
tt_face_get_ps_name( TT_Face face,
FT_UInt idx,
FT_String** PSname );
FT_LOCAL( void )
tt_face_free_ps_names( TT_Face face );
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_sfdriver
/*
* SFNT TABLE SERVICE
*
*/
static void*
get_sfnt_table( TT_Face face,
FT_Sfnt_Tag tag )
{
void* table;
switch ( tag )
{
case ft_sfnt_head:
table = &face->header;
break;
case ft_sfnt_hhea:
table = &face->horizontal;
break;
case ft_sfnt_vhea:
table = face->vertical_info ? &face->vertical : 0;
break;
case ft_sfnt_os2:
table = face->os2.version == 0xFFFFU ? 0 : &face->os2;
break;
case ft_sfnt_post:
table = &face->postscript;
break;
case ft_sfnt_maxp:
table = &face->max_profile;
break;
case ft_sfnt_pclt:
table = face->pclt.Version ? &face->pclt : 0;
break;
default:
table = 0;
}
return table;
}
static FT_Error
sfnt_table_info( TT_Face face,
FT_UInt idx,
FT_ULong *tag,
FT_ULong *offset,
FT_ULong *length )
{
if ( !offset || !length )
return SFNT_Err_Invalid_Argument;
if ( !tag )
*length = face->num_tables;
else
{
if ( idx >= face->num_tables )
return SFNT_Err_Table_Missing;
*tag = face->dir_tables[idx].Tag;
*offset = face->dir_tables[idx].Offset;
*length = face->dir_tables[idx].Length;
}
return SFNT_Err_Ok;
}
FT_DEFINE_SERVICE_SFNT_TABLEREC(
sfnt_service_sfnt_table,
(FT_SFNT_TableLoadFunc)tt_face_load_any,
(FT_SFNT_TableGetFunc) get_sfnt_table,
(FT_SFNT_TableInfoFunc)sfnt_table_info )
/*
* GLYPH DICT SERVICE
*
*/
static FT_Error
sfnt_get_glyph_name( TT_Face face,
FT_UInt glyph_index,
FT_Pointer buffer,
FT_UInt buffer_max )
{
FT_String* gname;
FT_Error error;
error = tt_face_get_ps_name( face, glyph_index, &gname );
if ( !error )
FT_STRCPYN( buffer, gname, buffer_max );
return error;
}
static FT_UInt
sfnt_get_name_index( TT_Face face,
FT_String* glyph_name )
{
FT_Face root = &face->root;
FT_UInt i, max_gid = FT_UINT_MAX;
if ( root->num_glyphs < 0 )
return 0;
else if ( (FT_ULong)root->num_glyphs < FT_UINT_MAX )
max_gid = (FT_UInt)root->num_glyphs;
else
FT_TRACE0(( "Ignore glyph names for invalid GID 0x%08x - 0x%08x\n",
FT_UINT_MAX, root->num_glyphs ));
for ( i = 0; i < max_gid; i++ )
{
FT_String* gname;
FT_Error error = tt_face_get_ps_name( face, i, &gname );
if ( error )
continue;
if ( !ft_strcmp( glyph_name, gname ) )
return i;
}
return 0;
}
FT_DEFINE_SERVICE_GLYPHDICTREC(
sfnt_service_glyph_dict,
(FT_GlyphDict_GetNameFunc) sfnt_get_glyph_name,
(FT_GlyphDict_NameIndexFunc)sfnt_get_name_index )
/*
* POSTSCRIPT NAME SERVICE
*
*/
static const char*
sfnt_get_ps_name( TT_Face face )
{
FT_Int n, found_win, found_apple;
const char* result = NULL;
/* shouldn't happen, but just in case to avoid memory leaks */
if ( face->postscript_name )
return face->postscript_name;
/* scan the name table to see whether we have a Postscript name here, */
/* either in Macintosh or Windows platform encodings */
found_win = -1;
found_apple = -1;
for ( n = 0; n < face->num_names; n++ )
{
TT_NameEntryRec* name = face->name_table.names + n;
if ( name->nameID == 6 && name->stringLength > 0 )
{
if ( name->platformID == 3 &&
name->encodingID == 1 &&
name->languageID == 0x409 )
found_win = n;
if ( name->platformID == 1 &&
name->encodingID == 0 &&
name->languageID == 0 )
found_apple = n;
}
}
if ( found_win != -1 )
{
FT_Memory memory = face->root.memory;
TT_NameEntryRec* name = face->name_table.names + found_win;
FT_UInt len = name->stringLength / 2;
FT_Error error = SFNT_Err_Ok;
FT_UNUSED( error );
if ( !FT_ALLOC( result, name->stringLength + 1 ) )
{
FT_Stream stream = face->name_table.stream;
FT_String* r = (FT_String*)result;
FT_Byte* p = (FT_Byte*)name->string;
if ( FT_STREAM_SEEK( name->stringOffset ) ||
FT_FRAME_ENTER( name->stringLength ) )
{
FT_FREE( result );
name->stringLength = 0;
name->stringOffset = 0;
FT_FREE( name->string );
goto Exit;
}
p = (FT_Byte*)stream->cursor;
for ( ; len > 0; len--, p += 2 )
{
if ( p[0] == 0 && p[1] >= 32 && p[1] < 128 )
*r++ = p[1];
}
*r = '\0';
FT_FRAME_EXIT();
}
goto Exit;
}
if ( found_apple != -1 )
{
FT_Memory memory = face->root.memory;
TT_NameEntryRec* name = face->name_table.names + found_apple;
FT_UInt len = name->stringLength;
FT_Error error = SFNT_Err_Ok;
FT_UNUSED( error );
if ( !FT_ALLOC( result, len + 1 ) )
{
FT_Stream stream = face->name_table.stream;
if ( FT_STREAM_SEEK( name->stringOffset ) ||
FT_STREAM_READ( result, len ) )
{
name->stringOffset = 0;
name->stringLength = 0;
FT_FREE( name->string );
FT_FREE( result );
goto Exit;
}
((char*)result)[len] = '\0';
}
}
Exit:
face->postscript_name = result;
return result;
}
FT_DEFINE_SERVICE_PSFONTNAMEREC(
sfnt_service_ps_name,
(FT_PsName_GetFunc)sfnt_get_ps_name )
/*
* TT CMAP INFO
*/
FT_DEFINE_SERVICE_TTCMAPSREC(
tt_service_get_cmap_info,
(TT_CMap_Info_GetFunc)tt_get_cmap_info )
static FT_Error
sfnt_get_charset_id( TT_Face face,
const char* *acharset_encoding,
const char* *acharset_registry )
{
BDF_PropertyRec encoding, registry;
FT_Error error;
/* XXX: I don't know whether this is correct, since
* tt_face_find_bdf_prop only returns something correct if we have
* previously selected a size that is listed in the BDF table.
* Should we change the BDF table format to include single offsets
* for `CHARSET_REGISTRY' and `CHARSET_ENCODING'?
*/
error = tt_face_find_bdf_prop( face, "CHARSET_REGISTRY", &registry );
if ( !error )
{
error = tt_face_find_bdf_prop( face, "CHARSET_ENCODING", &encoding );
if ( !error )
{
if ( registry.type == BDF_PROPERTY_TYPE_ATOM &&
encoding.type == BDF_PROPERTY_TYPE_ATOM )
{
*acharset_encoding = encoding.u.atom;
*acharset_registry = registry.u.atom;
}
else
error = SFNT_Err_Invalid_Argument;
}
}
return error;
}
FT_DEFINE_SERVICE_BDFRec(
sfnt_service_bdf,
(FT_BDF_GetCharsetIdFunc)sfnt_get_charset_id,
(FT_BDF_GetPropertyFunc) tt_face_find_bdf_prop )
/*
* SERVICE LIST
*/
FT_DEFINE_SERVICEDESCREC5(
sfnt_services,
FT_SERVICE_ID_SFNT_TABLE, &SFNT_SERVICE_SFNT_TABLE_GET,
FT_SERVICE_ID_POSTSCRIPT_FONT_NAME, &SFNT_SERVICE_PS_NAME_GET,
FT_SERVICE_ID_GLYPH_DICT, &SFNT_SERVICE_GLYPH_DICT_GET,
FT_SERVICE_ID_BDF, &SFNT_SERVICE_BDF_GET,
FT_SERVICE_ID_TT_CMAP, &TT_SERVICE_CMAP_INFO_GET )
FT_CALLBACK_DEF( FT_Module_Interface )
sfnt_get_interface( FT_Module module,
const char* module_interface )
{
/* SFNT_SERVICES_GET derefers `library' in PIC mode */
FT_UNUSED( module );
return ft_service_list_lookup( SFNT_SERVICES_GET, module_interface );
}
#define PUT_EMBEDDED_BITMAPS( a ) a
#define PUT_PS_NAMES( a ) a
FT_DEFINE_SFNT_INTERFACE(
sfnt_interface,
tt_face_goto_table,
sfnt_init_face,
sfnt_load_face,
sfnt_done_face,
sfnt_get_interface,
tt_face_load_any,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_face_load_sfnt_header_stub,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_face_load_directory_stub,
tt_face_load_head,
tt_face_load_hhea,
tt_face_load_cmap,
tt_face_load_maxp,
tt_face_load_os2,
tt_face_load_post,
tt_face_load_name,
tt_face_free_name,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_face_load_hdmx_stub,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_face_free_hdmx_stub,
tt_face_load_kern,
tt_face_load_gasp,
tt_face_load_pclt,
/* see `ttload.h' */
PUT_EMBEDDED_BITMAPS( tt_face_load_bhed ),
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_face_set_sbit_strike_stub,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_face_load_sbit_stub,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_find_sbit_image,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_load_sbit_metrics,
PUT_EMBEDDED_BITMAPS( tt_face_load_sbit_image ),
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_face_free_sbit_stub,
/* see `ttpost.h' */
PUT_PS_NAMES( tt_face_get_ps_name ),
PUT_PS_NAMES( tt_face_free_ps_names ),
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_face_load_charmap_stub,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
tt_face_free_charmap_stub,
/* since version 2.1.8 */
tt_face_get_kerning,
/* since version 2.2 */
tt_face_load_font_dir,
tt_face_load_hmtx,
/* see `ttsbit.h' and `sfnt.h' */
PUT_EMBEDDED_BITMAPS( tt_face_load_eblc ),
PUT_EMBEDDED_BITMAPS( tt_face_free_eblc ),
PUT_EMBEDDED_BITMAPS( tt_face_set_sbit_strike ),
PUT_EMBEDDED_BITMAPS( tt_face_load_strike_metrics ),
tt_face_get_metrics
)
FT_DEFINE_MODULE(
sfnt_module_class,
/* not a font driver or renderer */
0,
sizeof ( FT_ModuleRec ),
/* driver name */
"sfnt",
/* driver version 1.0 */
0x10000L,
/* driver requires FreeType 2.0 or higher */
0x20000L,
/* module specific interface */
(const void*)&SFNT_INTERFACE_GET,
(FT_Module_Constructor)0,
(FT_Module_Destructor) 0,
(FT_Module_Requester) sfnt_get_interface )
/* END */
/***************************************************************************/
/* */
/* ttsbit.c */
/* */
/* TrueType and OpenType embedded bitmap support (body). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, */
/* 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*
* Alas, the memory-optimized sbit loader can't be used when implementing
* the `old internals' hack
*/
/***************************************************************************/
/* */
/* ttsbit0.c */
/* */
/* TrueType and OpenType embedded bitmap support (body). */
/* This is a heap-optimized version. */
/* */
/* Copyright 2005, 2006, 2007, 2008, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* This file is included by ttsbit.c */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttsbit
FT_LOCAL_DEF( FT_Error )
tt_face_load_eblc( TT_Face face,
FT_Stream stream )
{
FT_Error error = SFNT_Err_Ok;
FT_Fixed version;
FT_ULong num_strikes, table_size;
FT_Byte* p;
FT_Byte* p_limit;
FT_UInt count;
face->sbit_num_strikes = 0;
/* this table is optional */
error = face->goto_table( face, TTAG_EBLC, stream, &table_size );
if ( error )
error = face->goto_table( face, TTAG_bloc, stream, &table_size );
if ( error )
goto Exit;
if ( table_size < 8 )
{
FT_ERROR(( "tt_face_load_sbit_strikes: table too short\n" ));
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
if ( FT_FRAME_EXTRACT( table_size, face->sbit_table ) )
goto Exit;
face->sbit_table_size = table_size;
p = face->sbit_table;
p_limit = p + table_size;
version = FT_NEXT_ULONG( p );
num_strikes = FT_NEXT_ULONG( p );
if ( version != 0x00020000UL || num_strikes >= 0x10000UL )
{
FT_ERROR(( "tt_face_load_sbit_strikes: invalid table version\n" ));
error = SFNT_Err_Invalid_File_Format;
goto Fail;
}
/*
* Count the number of strikes available in the table. We are a bit
* paranoid there and don't trust the data.
*/
count = (FT_UInt)num_strikes;
if ( 8 + 48UL * count > table_size )
count = (FT_UInt)( ( p_limit - p ) / 48 );
face->sbit_num_strikes = count;
FT_TRACE3(( "sbit_num_strikes: %u\n", count ));
Exit:
return error;
Fail:
FT_FRAME_RELEASE( face->sbit_table );
face->sbit_table_size = 0;
goto Exit;
}
FT_LOCAL_DEF( void )
tt_face_free_eblc( TT_Face face )
{
FT_Stream stream = face->root.stream;
FT_FRAME_RELEASE( face->sbit_table );
face->sbit_table_size = 0;
face->sbit_num_strikes = 0;
}
FT_LOCAL_DEF( FT_Error )
tt_face_set_sbit_strike( TT_Face face,
FT_Size_Request req,
FT_ULong* astrike_index )
{
return FT_Match_Size( (FT_Face)face, req, 0, astrike_index );
}
FT_LOCAL_DEF( FT_Error )
tt_face_load_strike_metrics( TT_Face face,
FT_ULong strike_index,
FT_Size_Metrics* metrics )
{
FT_Byte* strike;
if ( strike_index >= (FT_ULong)face->sbit_num_strikes )
return SFNT_Err_Invalid_Argument;
strike = face->sbit_table + 8 + strike_index * 48;
metrics->x_ppem = (FT_UShort)strike[44];
metrics->y_ppem = (FT_UShort)strike[45];
/* hori.ascender */
metrics->ascender = (FT_Char)strike[16] << 6;
/* hori.descender */
metrics->descender = (FT_Char)strike[17] << 6;
metrics->height = metrics->ascender - metrics->descender;
/* XXX: Is this correct? */
/* min_origin_SB */
metrics->max_advance = ( (FT_Char)strike[22] +
/* max_width */
strike[18] +
/* min_advance_SB */
(FT_Char)strike[23]
) << 6;
return SFNT_Err_Ok;
}
typedef struct TT_SBitDecoderRec_
{
TT_Face face;
FT_Stream stream;
FT_Bitmap* bitmap;
TT_SBit_Metrics metrics;
FT_Bool metrics_loaded;
FT_Bool bitmap_allocated;
FT_Byte bit_depth;
FT_ULong ebdt_start;
FT_ULong ebdt_size;
FT_ULong strike_index_array;
FT_ULong strike_index_count;
FT_Byte* eblc_base;
FT_Byte* eblc_limit;
} TT_SBitDecoderRec, *TT_SBitDecoder;
static FT_Error
tt_sbit_decoder_init( TT_SBitDecoder decoder,
TT_Face face,
FT_ULong strike_index,
TT_SBit_MetricsRec* metrics )
{
FT_Error error;
FT_Stream stream = face->root.stream;
FT_ULong ebdt_size;
error = face->goto_table( face, TTAG_EBDT, stream, &ebdt_size );
if ( error )
error = face->goto_table( face, TTAG_bdat, stream, &ebdt_size );
if ( error )
goto Exit;
decoder->face = face;
decoder->stream = stream;
decoder->bitmap = &face->root.glyph->bitmap;
decoder->metrics = metrics;
decoder->metrics_loaded = 0;
decoder->bitmap_allocated = 0;
decoder->ebdt_start = FT_STREAM_POS();
decoder->ebdt_size = ebdt_size;
decoder->eblc_base = face->sbit_table;
decoder->eblc_limit = face->sbit_table + face->sbit_table_size;
/* now find the strike corresponding to the index */
{
FT_Byte* p;
if ( 8 + 48 * strike_index + 3 * 4 + 34 + 1 > face->sbit_table_size )
{
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
p = decoder->eblc_base + 8 + 48 * strike_index;
decoder->strike_index_array = FT_NEXT_ULONG( p );
p += 4;
decoder->strike_index_count = FT_NEXT_ULONG( p );
p += 34;
decoder->bit_depth = *p;
if ( decoder->strike_index_array > face->sbit_table_size ||
decoder->strike_index_array + 8 * decoder->strike_index_count >
face->sbit_table_size )
error = SFNT_Err_Invalid_File_Format;
}
Exit:
return error;
}
static void
tt_sbit_decoder_done( TT_SBitDecoder decoder )
{
FT_UNUSED( decoder );
}
static FT_Error
tt_sbit_decoder_alloc_bitmap( TT_SBitDecoder decoder )
{
FT_Error error = SFNT_Err_Ok;
FT_UInt width, height;
FT_Bitmap* map = decoder->bitmap;
FT_Long size;
if ( !decoder->metrics_loaded )
{
error = SFNT_Err_Invalid_Argument;
goto Exit;
}
width = decoder->metrics->width;
height = decoder->metrics->height;
map->width = (int)width;
map->rows = (int)height;
switch ( decoder->bit_depth )
{
case 1:
map->pixel_mode = FT_PIXEL_MODE_MONO;
map->pitch = ( map->width + 7 ) >> 3;
break;
case 2:
map->pixel_mode = FT_PIXEL_MODE_GRAY2;
map->pitch = ( map->width + 3 ) >> 2;
break;
case 4:
map->pixel_mode = FT_PIXEL_MODE_GRAY4;
map->pitch = ( map->width + 1 ) >> 1;
break;
case 8:
map->pixel_mode = FT_PIXEL_MODE_GRAY;
map->pitch = map->width;
break;
default:
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
size = map->rows * map->pitch;
/* check that there is no empty image */
if ( size == 0 )
/* exit successfully! */
goto Exit;
error = ft_glyphslot_alloc_bitmap( decoder->face->root.glyph, size );
if ( error )
goto Exit;
decoder->bitmap_allocated = 1;
Exit:
return error;
}
static FT_Error
tt_sbit_decoder_load_metrics( TT_SBitDecoder decoder,
FT_Byte* *pp,
FT_Byte* limit,
FT_Bool big )
{
FT_Byte* p = *pp;
TT_SBit_Metrics metrics = decoder->metrics;
if ( p + 5 > limit )
goto Fail;
metrics->height = p[0];
metrics->width = p[1];
metrics->horiBearingX = (FT_Char)p[2];
metrics->horiBearingY = (FT_Char)p[3];
metrics->horiAdvance = p[4];
p += 5;
if ( big )
{
if ( p + 3 > limit )
goto Fail;
metrics->vertBearingX = (FT_Char)p[0];
metrics->vertBearingY = (FT_Char)p[1];
metrics->vertAdvance = p[2];
p += 3;
}
decoder->metrics_loaded = 1;
*pp = p;
return SFNT_Err_Ok;
Fail:
return SFNT_Err_Invalid_Argument;
}
/* forward declaration */
static FT_Error
tt_sbit_decoder_load_image( TT_SBitDecoder decoder,
FT_UInt glyph_index,
FT_Int x_pos,
FT_Int y_pos );
typedef FT_Error (*TT_SBitDecoder_LoadFunc)( TT_SBitDecoder decoder,
FT_Byte* p,
FT_Byte* plimit,
FT_Int x_pos,
FT_Int y_pos );
static FT_Error
tt_sbit_decoder_load_byte_aligned( TT_SBitDecoder decoder,
FT_Byte* p,
FT_Byte* limit,
FT_Int x_pos,
FT_Int y_pos )
{
FT_Error error = SFNT_Err_Ok;
FT_Byte* line;
FT_Int bit_height, bit_width, pitch, width, height, h;
FT_Bitmap* bitmap;
if ( !decoder->bitmap_allocated )
{
error = tt_sbit_decoder_alloc_bitmap( decoder );
if ( error )
goto Exit;
}
/* check that we can write the glyph into the bitmap */
bitmap = decoder->bitmap;
bit_width = bitmap->width;
bit_height = bitmap->rows;
pitch = bitmap->pitch;
line = bitmap->buffer;
width = decoder->metrics->width;
height = decoder->metrics->height;
if ( x_pos < 0 || x_pos + width > bit_width ||
y_pos < 0 || y_pos + height > bit_height )
{
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
if ( p + ( ( width + 7 ) >> 3 ) * height > limit )
{
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
/* now do the blit */
line += y_pos * pitch + ( x_pos >> 3 );
x_pos &= 7;
/* the easy one */
if ( x_pos == 0 )
{
for ( h = height; h > 0; h--, line += pitch )
{
FT_Byte* write = line;
FT_Int w;
for ( w = width; w >= 8; w -= 8 )
{
write[0] = (FT_Byte)( write[0] | *p++ );
write += 1;
}
if ( w > 0 )
write[0] = (FT_Byte)( write[0] | ( *p++ & ( 0xFF00U >> w ) ) );
}
}
/* x_pos > 0 */
else
{
for ( h = height; h > 0; h--, line += pitch )
{
FT_Byte* write = line;
FT_Int w;
FT_UInt wval = 0;
for ( w = width; w >= 8; w -= 8 )
{
wval = (FT_UInt)( wval | *p++ );
write[0] = (FT_Byte)( write[0] | ( wval >> x_pos ) );
write += 1;
wval <<= 8;
}
if ( w > 0 )
wval = (FT_UInt)( wval | ( *p++ & ( 0xFF00U >> w ) ) );
/* all bits read and there are `x_pos + w' bits to be written */
write[0] = (FT_Byte)( write[0] | ( wval >> x_pos ) );
if ( x_pos + w > 8 )
{
write++;
wval <<= 8;
write[0] = (FT_Byte)( write[0] | ( wval >> x_pos ) );
}
}
}
Exit:
return error;
}
/*
* Load a bit-aligned bitmap (with pointer `p') into a line-aligned bitmap
* (with pointer `write'). In the example below, the width is 3 pixel,
* and `x_pos' is 1 pixel.
*
* p p+1
* | | |
* | 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 |...
* | | |
* +-------+ +-------+ +-------+ ...
* . . .
* . . .
* v . .
* +-------+ . .
* | | .
* | 7 6 5 4 3 2 1 0 | .
* | | .
* write . .
* . .
* v .
* +-------+ .
* | |
* | 7 6 5 4 3 2 1 0 |
* | |
* write+1 .
* .
* v
* +-------+
* | |
* | 7 6 5 4 3 2 1 0 |
* | |
* write+2
*
*/
static FT_Error
tt_sbit_decoder_load_bit_aligned( TT_SBitDecoder decoder,
FT_Byte* p,
FT_Byte* limit,
FT_Int x_pos,
FT_Int y_pos )
{
FT_Error error = SFNT_Err_Ok;
FT_Byte* line;
FT_Int bit_height, bit_width, pitch, width, height, h, nbits;
FT_Bitmap* bitmap;
FT_UShort rval;
if ( !decoder->bitmap_allocated )
{
error = tt_sbit_decoder_alloc_bitmap( decoder );
if ( error )
goto Exit;
}
/* check that we can write the glyph into the bitmap */
bitmap = decoder->bitmap;
bit_width = bitmap->width;
bit_height = bitmap->rows;
pitch = bitmap->pitch;
line = bitmap->buffer;
width = decoder->metrics->width;
height = decoder->metrics->height;
if ( x_pos < 0 || x_pos + width > bit_width ||
y_pos < 0 || y_pos + height > bit_height )
{
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
if ( p + ( ( width * height + 7 ) >> 3 ) > limit )
{
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
/* now do the blit */
/* adjust `line' to point to the first byte of the bitmap */
line += y_pos * pitch + ( x_pos >> 3 );
x_pos &= 7;
/* the higher byte of `rval' is used as a buffer */
rval = 0;
nbits = 0;
for ( h = height; h > 0; h--, line += pitch )
{
FT_Byte* write = line;
FT_Int w = width;
/* handle initial byte (in target bitmap) specially if necessary */
if ( x_pos )
{
w = ( width < 8 - x_pos ) ? width : 8 - x_pos;
if ( h == height )
{
rval = *p++;
nbits = x_pos;
}
else if ( nbits < w )
{
if ( p < limit )
rval |= *p++;
nbits += 8 - w;
}
else
{
rval >>= 8;
nbits -= w;
}
*write++ |= ( ( rval >> nbits ) & 0xFF ) &
( ~( 0xFF << w ) << ( 8 - w - x_pos ) );
rval <<= 8;
w = width - w;
}
/* handle medial bytes */
for ( ; w >= 8; w -= 8 )
{
rval |= *p++;
*write++ |= ( rval >> nbits ) & 0xFF;
rval <<= 8;
}
/* handle final byte if necessary */
if ( w > 0 )
{
if ( nbits < w )
{
if ( p < limit )
rval |= *p++;
*write |= ( ( rval >> nbits ) & 0xFF ) & ( 0xFF00U >> w );
nbits += 8 - w;
rval <<= 8;
}
else
{
*write |= ( ( rval >> nbits ) & 0xFF ) & ( 0xFF00U >> w );
nbits -= w;
}
}
}
Exit:
return error;
}
static FT_Error
tt_sbit_decoder_load_compound( TT_SBitDecoder decoder,
FT_Byte* p,
FT_Byte* limit,
FT_Int x_pos,
FT_Int y_pos )
{
FT_Error error = SFNT_Err_Ok;
FT_UInt num_components, nn;
FT_Char horiBearingX = decoder->metrics->horiBearingX;
FT_Char horiBearingY = decoder->metrics->horiBearingY;
FT_Byte horiAdvance = decoder->metrics->horiAdvance;
FT_Char vertBearingX = decoder->metrics->vertBearingX;
FT_Char vertBearingY = decoder->metrics->vertBearingY;
FT_Byte vertAdvance = decoder->metrics->vertAdvance;
if ( p + 2 > limit )
goto Fail;
num_components = FT_NEXT_USHORT( p );
if ( p + 4 * num_components > limit )
goto Fail;
if ( !decoder->bitmap_allocated )
{
error = tt_sbit_decoder_alloc_bitmap( decoder );
if ( error )
goto Exit;
}
for ( nn = 0; nn < num_components; nn++ )
{
FT_UInt gindex = FT_NEXT_USHORT( p );
FT_Byte dx = FT_NEXT_BYTE( p );
FT_Byte dy = FT_NEXT_BYTE( p );
/* NB: a recursive call */
error = tt_sbit_decoder_load_image( decoder, gindex,
x_pos + dx, y_pos + dy );
if ( error )
break;
}
decoder->metrics->horiBearingX = horiBearingX;
decoder->metrics->horiBearingY = horiBearingY;
decoder->metrics->horiAdvance = horiAdvance;
decoder->metrics->vertBearingX = vertBearingX;
decoder->metrics->vertBearingY = vertBearingY;
decoder->metrics->vertAdvance = vertAdvance;
decoder->metrics->width = (FT_UInt)decoder->bitmap->width;
decoder->metrics->height = (FT_UInt)decoder->bitmap->rows;
Exit:
return error;
Fail:
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
static FT_Error
tt_sbit_decoder_load_bitmap( TT_SBitDecoder decoder,
FT_UInt glyph_format,
FT_ULong glyph_start,
FT_ULong glyph_size,
FT_Int x_pos,
FT_Int y_pos )
{
FT_Error error;
FT_Stream stream = decoder->stream;
FT_Byte* p;
FT_Byte* p_limit;
FT_Byte* data;
/* seek into the EBDT table now */
if ( glyph_start + glyph_size > decoder->ebdt_size )
{
error = SFNT_Err_Invalid_Argument;
goto Exit;
}
if ( FT_STREAM_SEEK( decoder->ebdt_start + glyph_start ) ||
FT_FRAME_EXTRACT( glyph_size, data ) )
goto Exit;
p = data;
p_limit = p + glyph_size;
/* read the data, depending on the glyph format */
switch ( glyph_format )
{
case 1:
case 2:
case 8:
error = tt_sbit_decoder_load_metrics( decoder, &p, p_limit, 0 );
break;
case 6:
case 7:
case 9:
error = tt_sbit_decoder_load_metrics( decoder, &p, p_limit, 1 );
break;
default:
error = SFNT_Err_Ok;
}
if ( error )
goto Fail;
{
TT_SBitDecoder_LoadFunc loader;
switch ( glyph_format )
{
case 1:
case 6:
loader = tt_sbit_decoder_load_byte_aligned;
break;
case 2:
case 5:
case 7:
loader = tt_sbit_decoder_load_bit_aligned;
break;
case 8:
if ( p + 1 > p_limit )
goto Fail;
/* skip padding */
p += 1;
/* fall-through */
case 9:
loader = tt_sbit_decoder_load_compound;
break;
default:
goto Fail;
}
error = loader( decoder, p, p_limit, x_pos, y_pos );
}
Fail:
FT_FRAME_RELEASE( data );
Exit:
return error;
}
static FT_Error
tt_sbit_decoder_load_image( TT_SBitDecoder decoder,
FT_UInt glyph_index,
FT_Int x_pos,
FT_Int y_pos )
{
/*
* First, we find the correct strike range that applies to this
* glyph index.
*/
FT_Byte* p = decoder->eblc_base + decoder->strike_index_array;
FT_Byte* p_limit = decoder->eblc_limit;
FT_ULong num_ranges = decoder->strike_index_count;
FT_UInt start, end, index_format, image_format;
FT_ULong image_start = 0, image_end = 0, image_offset;
for ( ; num_ranges > 0; num_ranges-- )
{
start = FT_NEXT_USHORT( p );
end = FT_NEXT_USHORT( p );
if ( glyph_index >= start && glyph_index <= end )
goto FoundRange;
/* ignore index offset */
p += 4;
}
goto NoBitmap;
FoundRange:
image_offset = FT_NEXT_ULONG( p );
/* overflow check */
if ( decoder->eblc_base + decoder->strike_index_array + image_offset <
decoder->eblc_base )
goto Failure;
p = decoder->eblc_base + decoder->strike_index_array + image_offset;
if ( p + 8 > p_limit )
goto NoBitmap;
/* now find the glyph's location and extend within the ebdt table */
index_format = FT_NEXT_USHORT( p );
image_format = FT_NEXT_USHORT( p );
image_offset = FT_NEXT_ULONG ( p );
switch ( index_format )
{
/* 4-byte offsets relative to `image_offset' */
case 1:
{
p += 4 * ( glyph_index - start );
if ( p + 8 > p_limit )
goto NoBitmap;
image_start = FT_NEXT_ULONG( p );
image_end = FT_NEXT_ULONG( p );
/* missing glyph */
if ( image_start == image_end )
goto NoBitmap;
}
break;
/* big metrics, constant image size */
case 2:
{
FT_ULong image_size;
if ( p + 12 > p_limit )
goto NoBitmap;
image_size = FT_NEXT_ULONG( p );
if ( tt_sbit_decoder_load_metrics( decoder, &p, p_limit, 1 ) )
goto NoBitmap;
image_start = image_size * ( glyph_index - start );
image_end = image_start + image_size;
}
break;
/* 2-byte offsets relative to 'image_offset' */
case 3:
{
p += 2 * ( glyph_index - start );
if ( p + 4 > p_limit )
goto NoBitmap;
image_start = FT_NEXT_USHORT( p );
image_end = FT_NEXT_USHORT( p );
/* missing glyph */
if ( image_start == image_end )
goto NoBitmap;
}
break;
/* sparse glyph array with (glyph,offset) pairs */
case 4:
{
FT_ULong mm, num_glyphs;
if ( p + 4 > p_limit )
goto NoBitmap;
num_glyphs = FT_NEXT_ULONG( p );
/* overflow check */
if ( p + ( num_glyphs + 1 ) * 4 < p )
goto Failure;
if ( p + ( num_glyphs + 1 ) * 4 > p_limit )
goto NoBitmap;
for ( mm = 0; mm < num_glyphs; mm++ )
{
FT_UInt gindex = FT_NEXT_USHORT( p );
if ( gindex == glyph_index )
{
image_start = FT_NEXT_USHORT( p );
p += 2;
image_end = FT_PEEK_USHORT( p );
break;
}
p += 2;
}
if ( mm >= num_glyphs )
goto NoBitmap;
}
break;
/* constant metrics with sparse glyph codes */
case 5:
{
FT_ULong image_size, mm, num_glyphs;
if ( p + 16 > p_limit )
goto NoBitmap;
image_size = FT_NEXT_ULONG( p );
if ( tt_sbit_decoder_load_metrics( decoder, &p, p_limit, 1 ) )
goto NoBitmap;
num_glyphs = FT_NEXT_ULONG( p );
/* overflow check */
if ( p + 2 * num_glyphs < p )
goto Failure;
if ( p + 2 * num_glyphs > p_limit )
goto NoBitmap;
for ( mm = 0; mm < num_glyphs; mm++ )
{
FT_UInt gindex = FT_NEXT_USHORT( p );
if ( gindex == glyph_index )
break;
}
if ( mm >= num_glyphs )
goto NoBitmap;
image_start = image_size * mm;
image_end = image_start + image_size;
}
break;
default:
goto NoBitmap;
}
if ( image_start > image_end )
goto NoBitmap;
image_end -= image_start;
image_start = image_offset + image_start;
return tt_sbit_decoder_load_bitmap( decoder,
image_format,
image_start,
image_end,
x_pos,
y_pos );
Failure:
return SFNT_Err_Invalid_Table;
NoBitmap:
return SFNT_Err_Invalid_Argument;
}
FT_LOCAL( FT_Error )
tt_face_load_sbit_image( TT_Face face,
FT_ULong strike_index,
FT_UInt glyph_index,
FT_UInt load_flags,
FT_Stream stream,
FT_Bitmap *map,
TT_SBit_MetricsRec *metrics )
{
TT_SBitDecoderRec decoder[1];
FT_Error error;
FT_UNUSED( load_flags );
FT_UNUSED( stream );
FT_UNUSED( map );
error = tt_sbit_decoder_init( decoder, face, strike_index, metrics );
if ( !error )
{
error = tt_sbit_decoder_load_image( decoder, glyph_index, 0, 0 );
tt_sbit_decoder_done( decoder );
}
return error;
}
/* EOF */
/* END */
/***************************************************************************/
/* */
/* ttpost.c */
/* */
/* Postcript name table processing for TrueType and OpenType fonts */
/* (body). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2006, 2007, 2008, 2009, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The post table is not completely loaded by the core engine. This */
/* file loads the missing PS glyph names and implements an API to access */
/* them. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttpost
/* If this configuration macro is defined, we rely on the `PSNames' */
/* module to grab the glyph names. */
#define MAC_NAME( x ) ( (FT_String*)psnames->macintosh_name( x ) )
static FT_Error
load_format_20( TT_Face face,
FT_Stream stream,
FT_Long post_limit )
{
FT_Memory memory = stream->memory;
FT_Error error;
FT_Int num_glyphs;
FT_UShort num_names;
FT_UShort* glyph_indices = 0;
FT_Char** name_strings = 0;
if ( FT_READ_USHORT( num_glyphs ) )
goto Exit;
/* UNDOCUMENTED! The number of glyphs in this table can be smaller */
/* than the value in the maxp table (cf. cyberbit.ttf). */
/* There already exist fonts which have more than 32768 glyph names */
/* in this table, so the test for this threshold has been dropped. */
if ( num_glyphs > face->max_profile.numGlyphs )
{
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
/* load the indices */
{
FT_Int n;
if ( FT_NEW_ARRAY ( glyph_indices, num_glyphs ) ||
FT_FRAME_ENTER( num_glyphs * 2L ) )
goto Fail;
for ( n = 0; n < num_glyphs; n++ )
glyph_indices[n] = FT_GET_USHORT();
FT_FRAME_EXIT();
}
/* compute number of names stored in table */
{
FT_Int n;
num_names = 0;
for ( n = 0; n < num_glyphs; n++ )
{
FT_Int idx;
idx = glyph_indices[n];
if ( idx >= 258 )
{
idx -= 257;
if ( idx > num_names )
num_names = (FT_UShort)idx;
}
}
}
/* now load the name strings */
{
FT_UShort n;
if ( FT_NEW_ARRAY( name_strings, num_names ) )
goto Fail;
for ( n = 0; n < num_names; n++ )
{
FT_UInt len;
if ( FT_STREAM_POS() >= post_limit )
break;
else
{
FT_TRACE6(( "load_format_20: %d byte left in post table\n",
post_limit - FT_STREAM_POS() ));
if ( FT_READ_BYTE( len ) )
goto Fail1;
}
if ( (FT_Int)len > post_limit ||
FT_STREAM_POS() > post_limit - (FT_Int)len )
{
FT_ERROR(( "load_format_20:"
" exceeding string length (%d),"
" truncating at end of post table (%d byte left)\n",
len, post_limit - FT_STREAM_POS() ));
len = FT_MAX( 0, post_limit - FT_STREAM_POS() );
}
if ( FT_NEW_ARRAY( name_strings[n], len + 1 ) ||
FT_STREAM_READ( name_strings[n], len ) )
goto Fail1;
name_strings[n][len] = '\0';
}
if ( n < num_names )
{
FT_ERROR(( "load_format_20:"
" all entries in post table are already parsed,"
" using NULL names for gid %d - %d\n",
n, num_names - 1 ));
for ( ; n < num_names; n++ )
if ( FT_NEW_ARRAY( name_strings[n], 1 ) )
goto Fail1;
else
name_strings[n][0] = '\0';
}
}
/* all right, set table fields and exit successfully */
{
TT_Post_20 table = &face->postscript_names.names.format_20;
table->num_glyphs = (FT_UShort)num_glyphs;
table->num_names = (FT_UShort)num_names;
table->glyph_indices = glyph_indices;
table->glyph_names = name_strings;
}
return SFNT_Err_Ok;
Fail1:
{
FT_UShort n;
for ( n = 0; n < num_names; n++ )
FT_FREE( name_strings[n] );
}
Fail:
FT_FREE( name_strings );
FT_FREE( glyph_indices );
Exit:
return error;
}
static FT_Error
load_format_25( TT_Face face,
FT_Stream stream,
FT_Long post_limit )
{
FT_Memory memory = stream->memory;
FT_Error error;
FT_Int num_glyphs;
FT_Char* offset_table = 0;
FT_UNUSED( post_limit );
/* UNDOCUMENTED! This value appears only in the Apple TT specs. */
if ( FT_READ_USHORT( num_glyphs ) )
goto Exit;
/* check the number of glyphs */
if ( num_glyphs > face->max_profile.numGlyphs || num_glyphs > 258 )
{
error = SFNT_Err_Invalid_File_Format;
goto Exit;
}
if ( FT_NEW_ARRAY( offset_table, num_glyphs ) ||
FT_STREAM_READ( offset_table, num_glyphs ) )
goto Fail;
/* now check the offset table */
{
FT_Int n;
for ( n = 0; n < num_glyphs; n++ )
{
FT_Long idx = (FT_Long)n + offset_table[n];
if ( idx < 0 || idx > num_glyphs )
{
error = SFNT_Err_Invalid_File_Format;
goto Fail;
}
}
}
/* OK, set table fields and exit successfully */
{
TT_Post_25 table = &face->postscript_names.names.format_25;
table->num_glyphs = (FT_UShort)num_glyphs;
table->offsets = offset_table;
}
return SFNT_Err_Ok;
Fail:
FT_FREE( offset_table );
Exit:
return error;
}
static FT_Error
load_post_names( TT_Face face )
{
FT_Stream stream;
FT_Error error;
FT_Fixed format;
FT_ULong post_len;
FT_Long post_limit;
/* get a stream for the face's resource */
stream = face->root.stream;
/* seek to the beginning of the PS names table */
error = face->goto_table( face, TTAG_post, stream, &post_len );
if ( error )
goto Exit;
post_limit = FT_STREAM_POS() + post_len;
format = face->postscript.FormatType;
/* go to beginning of subtable */
if ( FT_STREAM_SKIP( 32 ) )
goto Exit;
/* now read postscript table */
if ( format == 0x00020000L )
error = load_format_20( face, stream, post_limit );
else if ( format == 0x00028000L )
error = load_format_25( face, stream, post_limit );
else
error = SFNT_Err_Invalid_File_Format;
face->postscript_names.loaded = 1;
Exit:
return error;
}
FT_LOCAL_DEF( void )
tt_face_free_ps_names( TT_Face face )
{
FT_Memory memory = face->root.memory;
TT_Post_Names names = &face->postscript_names;
FT_Fixed format;
if ( names->loaded )
{
format = face->postscript.FormatType;
if ( format == 0x00020000L )
{
TT_Post_20 table = &names->names.format_20;
FT_UShort n;
FT_FREE( table->glyph_indices );
table->num_glyphs = 0;
for ( n = 0; n < table->num_names; n++ )
FT_FREE( table->glyph_names[n] );
FT_FREE( table->glyph_names );
table->num_names = 0;
}
else if ( format == 0x00028000L )
{
TT_Post_25 table = &names->names.format_25;
FT_FREE( table->offsets );
table->num_glyphs = 0;
}
}
names->loaded = 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_get_ps_name */
/* */
/* <Description> */
/* Get the PostScript glyph name of a glyph. */
/* */
/* <Input> */
/* face :: A handle to the parent face. */
/* */
/* idx :: The glyph index. */
/* */
/* <InOut> */
/* PSname :: The address of a string pointer. Will be NULL in case */
/* of error, otherwise it is a pointer to the glyph name. */
/* */
/* You must not modify the returned string! */
/* */
/* <Output> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_get_ps_name( TT_Face face,
FT_UInt idx,
FT_String** PSname )
{
FT_Error error;
TT_Post_Names names;
FT_Fixed format;
FT_Service_PsCMaps psnames;
if ( !face )
return SFNT_Err_Invalid_Face_Handle;
if ( idx >= (FT_UInt)face->max_profile.numGlyphs )
return SFNT_Err_Invalid_Glyph_Index;
psnames = (FT_Service_PsCMaps)face->psnames;
if ( !psnames )
return SFNT_Err_Unimplemented_Feature;
names = &face->postscript_names;
/* `.notdef' by default */
*PSname = MAC_NAME( 0 );
format = face->postscript.FormatType;
if ( format == 0x00010000L )
{
/* paranoid checking */
if ( idx < 258 )
*PSname = MAC_NAME( idx );
}
else if ( format == 0x00020000L )
{
TT_Post_20 table = &names->names.format_20;
if ( !names->loaded )
{
error = load_post_names( face );
if ( error )
goto End;
}
if ( idx < (FT_UInt)table->num_glyphs )
{
FT_UShort name_index = table->glyph_indices[idx];
if ( name_index < 258 )
*PSname = MAC_NAME( name_index );
else
*PSname = (FT_String*)table->glyph_names[name_index - 258];
}
}
else if ( format == 0x00028000L )
{
TT_Post_25 table = &names->names.format_25;
if ( !names->loaded )
{
error = load_post_names( face );
if ( error )
goto End;
}
/* paranoid checking */
if ( idx < (FT_UInt)table->num_glyphs )
{
idx += table->offsets[idx];
*PSname = MAC_NAME( idx );
}
}
/* nothing to do for format == 0x00030000L */
End:
return SFNT_Err_Ok;
}
/* END */
/***************************************************************************/
/* */
/* ttbdf.c */
/* */
/* TrueType and OpenType embedded BDF properties (body). */
/* */
/* Copyright 2005, 2006, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttbdf
FT_LOCAL_DEF( void )
tt_face_free_bdf_props( TT_Face face )
{
TT_BDF bdf = &face->bdf;
if ( bdf->loaded )
{
FT_Stream stream = FT_FACE(face)->stream;
if ( bdf->table != NULL )
FT_FRAME_RELEASE( bdf->table );
bdf->table_end = NULL;
bdf->strings = NULL;
bdf->strings_size = 0;
}
}
static FT_Error
tt_face_load_bdf_props( TT_Face face,
FT_Stream stream )
{
TT_BDF bdf = &face->bdf;
FT_ULong length;
FT_Error error;
FT_ZERO( bdf );
error = tt_face_goto_table( face, TTAG_BDF, stream, &length );
if ( error ||
length < 8 ||
FT_FRAME_EXTRACT( length, bdf->table ) )
{
error = SFNT_Err_Invalid_Table;
goto Exit;
}
bdf->table_end = bdf->table + length;
{
FT_Byte* p = bdf->table;
FT_UInt version = FT_NEXT_USHORT( p );
FT_UInt num_strikes = FT_NEXT_USHORT( p );
FT_ULong strings = FT_NEXT_ULONG ( p );
FT_UInt count;
FT_Byte* strike;
if ( version != 0x0001 ||
strings < 8 ||
( strings - 8 ) / 4 < num_strikes ||
strings + 1 > length )
{
goto BadTable;
}
bdf->num_strikes = num_strikes;
bdf->strings = bdf->table + strings;
bdf->strings_size = length - strings;
count = bdf->num_strikes;
p = bdf->table + 8;
strike = p + count * 4;
for ( ; count > 0; count-- )
{
FT_UInt num_items = FT_PEEK_USHORT( p + 2 );
/*
* We don't need to check the value sets themselves, since this
* is done later.
*/
strike += 10 * num_items;
p += 4;
}
if ( strike > bdf->strings )
goto BadTable;
}
bdf->loaded = 1;
Exit:
return error;
BadTable:
FT_FRAME_RELEASE( bdf->table );
FT_ZERO( bdf );
error = SFNT_Err_Invalid_Table;
goto Exit;
}
FT_LOCAL_DEF( FT_Error )
tt_face_find_bdf_prop( TT_Face face,
const char* property_name,
BDF_PropertyRec *aprop )
{
TT_BDF bdf = &face->bdf;
FT_Size size = FT_FACE(face)->size;
FT_Error error = SFNT_Err_Ok;
FT_Byte* p;
FT_UInt count;
FT_Byte* strike;
FT_Offset property_len;
aprop->type = BDF_PROPERTY_TYPE_NONE;
if ( bdf->loaded == 0 )
{
error = tt_face_load_bdf_props( face, FT_FACE( face )->stream );
if ( error )
goto Exit;
}
count = bdf->num_strikes;
p = bdf->table + 8;
strike = p + 4 * count;
error = SFNT_Err_Invalid_Argument;
if ( size == NULL || property_name == NULL )
goto Exit;
property_len = ft_strlen( property_name );
if ( property_len == 0 )
goto Exit;
for ( ; count > 0; count-- )
{
FT_UInt _ppem = FT_NEXT_USHORT( p );
FT_UInt _count = FT_NEXT_USHORT( p );
if ( _ppem == size->metrics.y_ppem )
{
count = _count;
goto FoundStrike;
}
strike += 10 * _count;
}
goto Exit;
FoundStrike:
p = strike;
for ( ; count > 0; count-- )
{
FT_UInt type = FT_PEEK_USHORT( p + 4 );
if ( ( type & 0x10 ) != 0 )
{
FT_UInt32 name_offset = FT_PEEK_ULONG( p );
FT_UInt32 value = FT_PEEK_ULONG( p + 6 );
/* be a bit paranoid for invalid entries here */
if ( name_offset < bdf->strings_size &&
property_len < bdf->strings_size - name_offset &&
ft_strncmp( property_name,
(const char*)bdf->strings + name_offset,
bdf->strings_size - name_offset ) == 0 )
{
switch ( type & 0x0F )
{
/* string */
case 0x00:
/* atoms */
case 0x01:
/* check that the content is really 0-terminated */
if ( value < bdf->strings_size &&
ft_memchr( bdf->strings + value, 0, bdf->strings_size ) )
{
aprop->type = BDF_PROPERTY_TYPE_ATOM;
aprop->u.atom = (const char*)bdf->strings + value;
error = SFNT_Err_Ok;
goto Exit;
}
break;
case 0x02:
aprop->type = BDF_PROPERTY_TYPE_INTEGER;
aprop->u.integer = (FT_Int32)value;
error = SFNT_Err_Ok;
goto Exit;
case 0x03:
aprop->type = BDF_PROPERTY_TYPE_CARDINAL;
aprop->u.cardinal = value;
error = SFNT_Err_Ok;
goto Exit;
default:
;
}
}
}
p += 10;
}
Exit:
return error;
}
/* END */
/* END */
/***************************************************************************/
/* */
/* pshinter.c */
/* */
/* FreeType PostScript Hinting module */
/* */
/* Copyright 2001, 2003 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* pshpic.c */
/* */
/* The FreeType position independent code services for pshinter module. */
/* */
/* Copyright 2009, 2010, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* pshpic.h */
/* */
/* The FreeType position independent code services for pshinter module. */
/* */
/* Copyright 2009, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSHPIC_H__
FT_BEGIN_HEADER
#define PSHINTER_INTERFACE_GET pshinter_interface
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* pshnterr.h */
/* */
/* PS Hinter error codes (specification only). */
/* */
/* Copyright 2003, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the PSHinter error enumeration constants. */
/* */
/*************************************************************************/
#define __PSHNTERR_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX PSH_Err_
#define FT_ERR_BASE FT_Mod_Err_PShinter
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/* END */
/***************************************************************************/
/* */
/* pshrec.c */
/* */
/* FreeType PostScript hints recorder (body). */
/* */
/* Copyright 2001, 2002, 2003, 2004, 2007, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* pshrec.h */
/* */
/* Postscript (Type1/Type2) hints recorder (specification). */
/* */
/* Copyright 2001, 2002, 2003, 2006, 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/**************************************************************************/
/* */
/* The functions defined here are called from the Type 1, CID and CFF */
/* font drivers to record the hints of a given character/glyph. */
/* */
/* The hints are recorded in a unified format, and are later processed */
/* by the `optimizer' and `fitter' to adjust the outlines to the pixel */
/* grid. */
/* */
/**************************************************************************/
#define __PSHREC_H__
/***************************************************************************/
/* */
/* pshglob.h */
/* */
/* PostScript hinter global hinting management. */
/* */
/* Copyright 2001, 2002, 2003 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSHGLOB_H__
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** GLOBAL HINTS INTERNALS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* @constant: */
/* PS_GLOBALS_MAX_BLUE_ZONES */
/* */
/* @description: */
/* The maximum number of blue zones in a font global hints structure. */
/* See @PS_Globals_BluesRec. */
/* */
#define PS_GLOBALS_MAX_BLUE_ZONES 16
/*************************************************************************/
/* */
/* @constant: */
/* PS_GLOBALS_MAX_STD_WIDTHS */
/* */
/* @description: */
/* The maximum number of standard and snap widths in either the */
/* horizontal or vertical direction. See @PS_Globals_WidthsRec. */
/* */
#define PS_GLOBALS_MAX_STD_WIDTHS 16
/* standard and snap width */
typedef struct PSH_WidthRec_
{
FT_Int org;
FT_Pos cur;
FT_Pos fit;
} PSH_WidthRec, *PSH_Width;
/* standard and snap widths table */
typedef struct PSH_WidthsRec_
{
FT_UInt count;
PSH_WidthRec widths[PS_GLOBALS_MAX_STD_WIDTHS];
} PSH_WidthsRec, *PSH_Widths;
typedef struct PSH_DimensionRec_
{
PSH_WidthsRec stdw;
FT_Fixed scale_mult;
FT_Fixed scale_delta;
} PSH_DimensionRec, *PSH_Dimension;
/* blue zone descriptor */
typedef struct PSH_Blue_ZoneRec_
{
FT_Int org_ref;
FT_Int org_delta;
FT_Int org_top;
FT_Int org_bottom;
FT_Pos cur_ref;
FT_Pos cur_delta;
FT_Pos cur_bottom;
FT_Pos cur_top;
} PSH_Blue_ZoneRec, *PSH_Blue_Zone;
typedef struct PSH_Blue_TableRec_
{
FT_UInt count;
PSH_Blue_ZoneRec zones[PS_GLOBALS_MAX_BLUE_ZONES];
} PSH_Blue_TableRec, *PSH_Blue_Table;
/* blue zones table */
typedef struct PSH_BluesRec_
{
PSH_Blue_TableRec normal_top;
PSH_Blue_TableRec normal_bottom;
PSH_Blue_TableRec family_top;
PSH_Blue_TableRec family_bottom;
FT_Fixed blue_scale;
FT_Int blue_shift;
FT_Int blue_threshold;
FT_Int blue_fuzz;
FT_Bool no_overshoots;
} PSH_BluesRec, *PSH_Blues;
/* font globals. */
/* dimension 0 => X coordinates + vertical hints/stems */
/* dimension 1 => Y coordinates + horizontal hints/stems */
typedef struct PSH_GlobalsRec_
{
FT_Memory memory;
PSH_DimensionRec dimension[2];
PSH_BluesRec blues;
} PSH_GlobalsRec;
#define PSH_BLUE_ALIGN_NONE 0
#define PSH_BLUE_ALIGN_TOP 1
#define PSH_BLUE_ALIGN_BOT 2
typedef struct PSH_AlignmentRec_
{
int align;
FT_Pos align_top;
FT_Pos align_bot;
} PSH_AlignmentRec, *PSH_Alignment;
FT_LOCAL( void )
psh_globals_funcs_init( PSH_Globals_FuncsRec* funcs );
#if 0
/* snap a stem width to fitter coordinates. `org_width' is in font */
/* units. The result is in device pixels (26.6 format). */
FT_LOCAL( FT_Pos )
psh_dimension_snap_width( PSH_Dimension dimension,
FT_Int org_width );
#endif
FT_LOCAL( FT_Error )
psh_globals_set_scale( PSH_Globals globals,
FT_Fixed x_scale,
FT_Fixed y_scale,
FT_Fixed x_delta,
FT_Fixed y_delta );
/* snap a stem to one or two blue zones */
FT_LOCAL( void )
psh_blues_snap_stem( PSH_Blues blues,
FT_Int stem_top,
FT_Int stem_bot,
PSH_Alignment alignment );
/* */
#ifdef DEBUG_HINTER
extern PSH_Globals ps_debug_globals;
#endif
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** GLYPH HINTS RECORDER INTERNALS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* handle to hint record */
typedef struct PS_HintRec_* PS_Hint;
/* hint types */
typedef enum PS_Hint_Type_
{
PS_HINT_TYPE_1 = 1,
PS_HINT_TYPE_2 = 2
} PS_Hint_Type;
/* hint flags */
typedef enum PS_Hint_Flags_
{
PS_HINT_FLAG_GHOST = 1,
PS_HINT_FLAG_BOTTOM = 2
} PS_Hint_Flags;
/* hint descriptor */
typedef struct PS_HintRec_
{
FT_Int pos;
FT_Int len;
FT_UInt flags;
} PS_HintRec;
#define ps_hint_is_active( x ) ( (x)->flags & PS_HINT_FLAG_ACTIVE )
#define ps_hint_is_ghost( x ) ( (x)->flags & PS_HINT_FLAG_GHOST )
#define ps_hint_is_bottom( x ) ( (x)->flags & PS_HINT_FLAG_BOTTOM )
/* hints table descriptor */
typedef struct PS_Hint_TableRec_
{
FT_UInt num_hints;
FT_UInt max_hints;
PS_Hint hints;
} PS_Hint_TableRec, *PS_Hint_Table;
/* hint and counter mask descriptor */
typedef struct PS_MaskRec_
{
FT_UInt num_bits;
FT_UInt max_bits;
FT_Byte* bytes;
FT_UInt end_point;
} PS_MaskRec, *PS_Mask;
/* masks and counters table descriptor */
typedef struct PS_Mask_TableRec_
{
FT_UInt num_masks;
FT_UInt max_masks;
PS_Mask masks;
} PS_Mask_TableRec, *PS_Mask_Table;
/* dimension-specific hints descriptor */
typedef struct PS_DimensionRec_
{
PS_Hint_TableRec hints;
PS_Mask_TableRec masks;
PS_Mask_TableRec counters;
} PS_DimensionRec, *PS_Dimension;
/* glyph hints descriptor */
/* dimension 0 => X coordinates + vertical hints/stems */
/* dimension 1 => Y coordinates + horizontal hints/stems */
typedef struct PS_HintsRec_
{
FT_Memory memory;
FT_Error error;
FT_UInt32 magic;
PS_Hint_Type hint_type;
PS_DimensionRec dimension[2];
} PS_HintsRec, *PS_Hints;
/* */
/* initialize hints recorder */
FT_LOCAL( FT_Error )
ps_hints_init( PS_Hints hints,
FT_Memory memory );
/* finalize hints recorder */
FT_LOCAL( void )
ps_hints_done( PS_Hints hints );
/* initialize Type1 hints recorder interface */
FT_LOCAL( void )
t1_hints_funcs_init( T1_Hints_FuncsRec* funcs );
/* initialize Type2 hints recorder interface */
FT_LOCAL( void )
t2_hints_funcs_init( T2_Hints_FuncsRec* funcs );
#ifdef DEBUG_HINTER
extern PS_Hints ps_debug_hints;
extern int ps_debug_no_horz_hints;
extern int ps_debug_no_vert_hints;
#endif
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* pshalgo.h */
/* */
/* PostScript hinting algorithm (specification). */
/* */
/* Copyright 2001, 2002, 2003, 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSHALGO_H__
FT_BEGIN_HEADER
/* handle to Hint structure */
typedef struct PSH_HintRec_* PSH_Hint;
/* hint bit-flags */
typedef enum PSH_Hint_Flags_
{
PSH_HINT_GHOST = PS_HINT_FLAG_GHOST,
PSH_HINT_BOTTOM = PS_HINT_FLAG_BOTTOM,
PSH_HINT_ACTIVE = 4,
PSH_HINT_FITTED = 8
} PSH_Hint_Flags;
#define psh_hint_is_active( x ) ( ( (x)->flags & PSH_HINT_ACTIVE ) != 0 )
#define psh_hint_is_ghost( x ) ( ( (x)->flags & PSH_HINT_GHOST ) != 0 )
#define psh_hint_is_fitted( x ) ( ( (x)->flags & PSH_HINT_FITTED ) != 0 )
#define psh_hint_activate( x ) (x)->flags |= PSH_HINT_ACTIVE
#define psh_hint_deactivate( x ) (x)->flags &= ~PSH_HINT_ACTIVE
#define psh_hint_set_fitted( x ) (x)->flags |= PSH_HINT_FITTED
/* hint structure */
typedef struct PSH_HintRec_
{
FT_Int org_pos;
FT_Int org_len;
FT_Pos cur_pos;
FT_Pos cur_len;
FT_UInt flags;
PSH_Hint parent;
FT_Int order;
} PSH_HintRec;
/* this is an interpolation zone used for strong points; */
/* weak points are interpolated according to their strong */
/* neighbours */
typedef struct PSH_ZoneRec_
{
FT_Fixed scale;
FT_Fixed delta;
FT_Pos min;
FT_Pos max;
} PSH_ZoneRec, *PSH_Zone;
typedef struct PSH_Hint_TableRec_
{
FT_UInt max_hints;
FT_UInt num_hints;
PSH_Hint hints;
PSH_Hint* sort;
PSH_Hint* sort_global;
FT_UInt num_zones;
PSH_ZoneRec* zones;
PSH_Zone zone;
PS_Mask_Table hint_masks;
PS_Mask_Table counter_masks;
} PSH_Hint_TableRec, *PSH_Hint_Table;
typedef struct PSH_PointRec_* PSH_Point;
typedef struct PSH_ContourRec_* PSH_Contour;
enum
{
PSH_DIR_NONE = 4,
PSH_DIR_UP = -1,
PSH_DIR_DOWN = 1,
PSH_DIR_LEFT = -2,
PSH_DIR_RIGHT = 2
};
#define PSH_DIR_HORIZONTAL 2
#define PSH_DIR_VERTICAL 1
#define PSH_DIR_COMPARE( d1, d2 ) ( (d1) == (d2) || (d1) == -(d2) )
#define PSH_DIR_IS_HORIZONTAL( d ) PSH_DIR_COMPARE( d, PSH_DIR_HORIZONTAL )
#define PSH_DIR_IS_VERTICAL( d ) PSH_DIR_COMPARE( d, PSH_DIR_VERTICAL )
/* the following bit-flags are computed once by the glyph */
/* analyzer, for both dimensions */
enum
{
/* point is off the curve */
PSH_POINT_OFF = 1,
/* point is smooth */
PSH_POINT_SMOOTH = 2,
/* point is inflection */
PSH_POINT_INFLEX = 4
};
#define psh_point_is_smooth( p ) ( (p)->flags & PSH_POINT_SMOOTH )
#define psh_point_is_off( p ) ( (p)->flags & PSH_POINT_OFF )
#define psh_point_is_inflex( p ) ( (p)->flags & PSH_POINT_INFLEX )
#define psh_point_set_smooth( p ) (p)->flags |= PSH_POINT_SMOOTH
#define psh_point_set_off( p ) (p)->flags |= PSH_POINT_OFF
#define psh_point_set_inflex( p ) (p)->flags |= PSH_POINT_INFLEX
/* the following bit-flags are re-computed for each dimension */
enum
{
/* point is strong */
PSH_POINT_STRONG = 16,
/* point is already fitted */
PSH_POINT_FITTED = 32,
/* point is local extremum */
PSH_POINT_EXTREMUM = 64,
/* extremum has positive contour flow */
PSH_POINT_POSITIVE = 128,
/* extremum has negative contour flow */
PSH_POINT_NEGATIVE = 256,
/* point is aligned to left/bottom stem edge */
PSH_POINT_EDGE_MIN = 512,
/* point is aligned to top/right stem edge */
PSH_POINT_EDGE_MAX = 1024
};
#define psh_point_is_strong( p ) ( (p)->flags2 & PSH_POINT_STRONG )
#define psh_point_is_fitted( p ) ( (p)->flags2 & PSH_POINT_FITTED )
#define psh_point_is_extremum( p ) ( (p)->flags2 & PSH_POINT_EXTREMUM )
#define psh_point_is_positive( p ) ( (p)->flags2 & PSH_POINT_POSITIVE )
#define psh_point_is_negative( p ) ( (p)->flags2 & PSH_POINT_NEGATIVE )
#define psh_point_is_edge_min( p ) ( (p)->flags2 & PSH_POINT_EDGE_MIN )
#define psh_point_is_edge_max( p ) ( (p)->flags2 & PSH_POINT_EDGE_MAX )
#define psh_point_set_strong( p ) (p)->flags2 |= PSH_POINT_STRONG
#define psh_point_set_fitted( p ) (p)->flags2 |= PSH_POINT_FITTED
#define psh_point_set_extremum( p ) (p)->flags2 |= PSH_POINT_EXTREMUM
#define psh_point_set_positive( p ) (p)->flags2 |= PSH_POINT_POSITIVE
#define psh_point_set_negative( p ) (p)->flags2 |= PSH_POINT_NEGATIVE
#define psh_point_set_edge_min( p ) (p)->flags2 |= PSH_POINT_EDGE_MIN
#define psh_point_set_edge_max( p ) (p)->flags2 |= PSH_POINT_EDGE_MAX
typedef struct PSH_PointRec_
{
PSH_Point prev;
PSH_Point next;
PSH_Contour contour;
FT_UInt flags;
FT_UInt flags2;
FT_Char dir_in;
FT_Char dir_out;
FT_Angle angle_in;
FT_Angle angle_out;
PSH_Hint hint;
FT_Pos org_u;
FT_Pos org_v;
FT_Pos cur_u;
#ifdef DEBUG_HINTER
FT_Pos org_x;
FT_Pos cur_x;
FT_Pos org_y;
FT_Pos cur_y;
FT_UInt flags_x;
FT_UInt flags_y;
#endif
} PSH_PointRec;
#define PSH_POINT_EQUAL_ORG( a, b ) ( (a)->org_u == (b)->org_u && \
(a)->org_v == (b)->org_v )
#define PSH_POINT_ANGLE( a, b ) FT_Atan2( (b)->org_u - (a)->org_u, \
(b)->org_v - (a)->org_v )
typedef struct PSH_ContourRec_
{
PSH_Point start;
FT_UInt count;
} PSH_ContourRec;
typedef struct PSH_GlyphRec_
{
FT_UInt num_points;
FT_UInt num_contours;
PSH_Point points;
PSH_Contour contours;
FT_Memory memory;
FT_Outline* outline;
PSH_Globals globals;
PSH_Hint_TableRec hint_tables[2];
FT_Bool vertical;
FT_Int major_dir;
FT_Int minor_dir;
FT_Bool do_horz_hints;
FT_Bool do_vert_hints;
FT_Bool do_horz_snapping;
FT_Bool do_vert_snapping;
FT_Bool do_stem_adjust;
} PSH_GlyphRec, *PSH_Glyph;
#ifdef DEBUG_HINTER
extern PSH_Hint_Table ps_debug_hint_table;
typedef void
(*PSH_HintFunc)( PSH_Hint hint,
FT_Bool vertical );
extern PSH_HintFunc ps_debug_hint_func;
extern PSH_Glyph ps_debug_glyph;
#endif
extern FT_Error
ps_hints_apply( PS_Hints ps_hints,
FT_Outline* outline,
PSH_Globals globals,
FT_Render_Mode hint_mode );
FT_END_HEADER
/* END */
#undef FT_COMPONENT
#define FT_COMPONENT trace_pshrec
#ifdef DEBUG_HINTER
PS_Hints ps_debug_hints = 0;
int ps_debug_no_horz_hints = 0;
int ps_debug_no_vert_hints = 0;
#endif
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PS_HINT MANAGEMENT *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* destroy hints table */
static void
ps_hint_table_done( PS_Hint_Table table,
FT_Memory memory )
{
FT_FREE( table->hints );
table->num_hints = 0;
table->max_hints = 0;
}
/* ensure that a table can contain "count" elements */
static FT_Error
ps_hint_table_ensure( PS_Hint_Table table,
FT_UInt count,
FT_Memory memory )
{
FT_UInt old_max = table->max_hints;
FT_UInt new_max = count;
FT_Error error = PSH_Err_Ok;
if ( new_max > old_max )
{
/* try to grow the table */
new_max = FT_PAD_CEIL( new_max, 8 );
if ( !FT_RENEW_ARRAY( table->hints, old_max, new_max ) )
table->max_hints = new_max;
}
return error;
}
static FT_Error
ps_hint_table_alloc( PS_Hint_Table table,
FT_Memory memory,
PS_Hint *ahint )
{
FT_Error error = PSH_Err_Ok;
FT_UInt count;
PS_Hint hint = 0;
count = table->num_hints;
count++;
if ( count >= table->max_hints )
{
error = ps_hint_table_ensure( table, count, memory );
if ( error )
goto Exit;
}
hint = table->hints + count - 1;
hint->pos = 0;
hint->len = 0;
hint->flags = 0;
table->num_hints = count;
Exit:
*ahint = hint;
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PS_MASK MANAGEMENT *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* destroy mask */
static void
ps_mask_done( PS_Mask mask,
FT_Memory memory )
{
FT_FREE( mask->bytes );
mask->num_bits = 0;
mask->max_bits = 0;
mask->end_point = 0;
}
/* ensure that a mask can contain "count" bits */
static FT_Error
ps_mask_ensure( PS_Mask mask,
FT_UInt count,
FT_Memory memory )
{
FT_UInt old_max = ( mask->max_bits + 7 ) >> 3;
FT_UInt new_max = ( count + 7 ) >> 3;
FT_Error error = PSH_Err_Ok;
if ( new_max > old_max )
{
new_max = FT_PAD_CEIL( new_max, 8 );
if ( !FT_RENEW_ARRAY( mask->bytes, old_max, new_max ) )
mask->max_bits = new_max * 8;
}
return error;
}
/* test a bit value in a given mask */
static FT_Int
ps_mask_test_bit( PS_Mask mask,
FT_Int idx )
{
if ( (FT_UInt)idx >= mask->num_bits )
return 0;
return mask->bytes[idx >> 3] & ( 0x80 >> ( idx & 7 ) );
}
/* clear a given bit */
static void
ps_mask_clear_bit( PS_Mask mask,
FT_Int idx )
{
FT_Byte* p;
if ( (FT_UInt)idx >= mask->num_bits )
return;
p = mask->bytes + ( idx >> 3 );
p[0] = (FT_Byte)( p[0] & ~( 0x80 >> ( idx & 7 ) ) );
}
/* set a given bit, possibly grow the mask */
static FT_Error
ps_mask_set_bit( PS_Mask mask,
FT_Int idx,
FT_Memory memory )
{
FT_Error error = PSH_Err_Ok;
FT_Byte* p;
if ( idx < 0 )
goto Exit;
if ( (FT_UInt)idx >= mask->num_bits )
{
error = ps_mask_ensure( mask, idx + 1, memory );
if ( error )
goto Exit;
mask->num_bits = idx + 1;
}
p = mask->bytes + ( idx >> 3 );
p[0] = (FT_Byte)( p[0] | ( 0x80 >> ( idx & 7 ) ) );
Exit:
return error;
}
/* destroy mask table */
static void
ps_mask_table_done( PS_Mask_Table table,
FT_Memory memory )
{
FT_UInt count = table->max_masks;
PS_Mask mask = table->masks;
for ( ; count > 0; count--, mask++ )
ps_mask_done( mask, memory );
FT_FREE( table->masks );
table->num_masks = 0;
table->max_masks = 0;
}
/* ensure that a mask table can contain "count" masks */
static FT_Error
ps_mask_table_ensure( PS_Mask_Table table,
FT_UInt count,
FT_Memory memory )
{
FT_UInt old_max = table->max_masks;
FT_UInt new_max = count;
FT_Error error = PSH_Err_Ok;
if ( new_max > old_max )
{
new_max = FT_PAD_CEIL( new_max, 8 );
if ( !FT_RENEW_ARRAY( table->masks, old_max, new_max ) )
table->max_masks = new_max;
}
return error;
}
/* allocate a new mask in a table */
static FT_Error
ps_mask_table_alloc( PS_Mask_Table table,
FT_Memory memory,
PS_Mask *amask )
{
FT_UInt count;
FT_Error error = PSH_Err_Ok;
PS_Mask mask = 0;
count = table->num_masks;
count++;
if ( count > table->max_masks )
{
error = ps_mask_table_ensure( table, count, memory );
if ( error )
goto Exit;
}
mask = table->masks + count - 1;
mask->num_bits = 0;
mask->end_point = 0;
table->num_masks = count;
Exit:
*amask = mask;
return error;
}
/* return last hint mask in a table, create one if the table is empty */
static FT_Error
ps_mask_table_last( PS_Mask_Table table,
FT_Memory memory,
PS_Mask *amask )
{
FT_Error error = PSH_Err_Ok;
FT_UInt count;
PS_Mask mask;
count = table->num_masks;
if ( count == 0 )
{
error = ps_mask_table_alloc( table, memory, &mask );
if ( error )
goto Exit;
}
else
mask = table->masks + count - 1;
Exit:
*amask = mask;
return error;
}
/* set a new mask to a given bit range */
static FT_Error
ps_mask_table_set_bits( PS_Mask_Table table,
const FT_Byte* source,
FT_UInt bit_pos,
FT_UInt bit_count,
FT_Memory memory )
{
FT_Error error = PSH_Err_Ok;
PS_Mask mask;
error = ps_mask_table_last( table, memory, &mask );
if ( error )
goto Exit;
error = ps_mask_ensure( mask, bit_count, memory );
if ( error )
goto Exit;
mask->num_bits = bit_count;
/* now, copy bits */
{
FT_Byte* read = (FT_Byte*)source + ( bit_pos >> 3 );
FT_Int rmask = 0x80 >> ( bit_pos & 7 );
FT_Byte* write = mask->bytes;
FT_Int wmask = 0x80;
FT_Int val;
for ( ; bit_count > 0; bit_count-- )
{
val = write[0] & ~wmask;
if ( read[0] & rmask )
val |= wmask;
write[0] = (FT_Byte)val;
rmask >>= 1;
if ( rmask == 0 )
{
read++;
rmask = 0x80;
}
wmask >>= 1;
if ( wmask == 0 )
{
write++;
wmask = 0x80;
}
}
}
Exit:
return error;
}
/* test whether two masks in a table intersect */
static FT_Int
ps_mask_table_test_intersect( PS_Mask_Table table,
FT_Int index1,
FT_Int index2 )
{
PS_Mask mask1 = table->masks + index1;
PS_Mask mask2 = table->masks + index2;
FT_Byte* p1 = mask1->bytes;
FT_Byte* p2 = mask2->bytes;
FT_UInt count1 = mask1->num_bits;
FT_UInt count2 = mask2->num_bits;
FT_UInt count;
count = ( count1 <= count2 ) ? count1 : count2;
for ( ; count >= 8; count -= 8 )
{
if ( p1[0] & p2[0] )
return 1;
p1++;
p2++;
}
if ( count == 0 )
return 0;
return ( p1[0] & p2[0] ) & ~( 0xFF >> count );
}
/* merge two masks, used by ps_mask_table_merge_all */
static FT_Error
ps_mask_table_merge( PS_Mask_Table table,
FT_Int index1,
FT_Int index2,
FT_Memory memory )
{
FT_UInt temp;
FT_Error error = PSH_Err_Ok;
/* swap index1 and index2 so that index1 < index2 */
if ( index1 > index2 )
{
temp = index1;
index1 = index2;
index2 = temp;
}
if ( index1 < index2 && index1 >= 0 && index2 < (FT_Int)table->num_masks )
{
/* we need to merge the bitsets of index1 and index2 with a */
/* simple union */
PS_Mask mask1 = table->masks + index1;
PS_Mask mask2 = table->masks + index2;
FT_UInt count1 = mask1->num_bits;
FT_UInt count2 = mask2->num_bits;
FT_Int delta;
if ( count2 > 0 )
{
FT_UInt pos;
FT_Byte* read;
FT_Byte* write;
/* if "count2" is greater than "count1", we need to grow the */
/* first bitset, and clear the highest bits */
if ( count2 > count1 )
{
error = ps_mask_ensure( mask1, count2, memory );
if ( error )
goto Exit;
for ( pos = count1; pos < count2; pos++ )
ps_mask_clear_bit( mask1, pos );
}
/* merge (unite) the bitsets */
read = mask2->bytes;
write = mask1->bytes;
pos = (FT_UInt)( ( count2 + 7 ) >> 3 );
for ( ; pos > 0; pos-- )
{
write[0] = (FT_Byte)( write[0] | read[0] );
write++;
read++;
}
}
/* Now, remove "mask2" from the list. We need to keep the masks */
/* sorted in order of importance, so move table elements. */
mask2->num_bits = 0;
mask2->end_point = 0;
/* number of masks to move */
delta = table->num_masks - 1 - index2;
if ( delta > 0 )
{
/* move to end of table for reuse */
PS_MaskRec dummy = *mask2;
ft_memmove( mask2, mask2 + 1, delta * sizeof ( PS_MaskRec ) );
mask2[delta] = dummy;
}
table->num_masks--;
}
else
FT_TRACE0(( "ps_mask_table_merge: ignoring invalid indices (%d,%d)\n",
index1, index2 ));
Exit:
return error;
}
/* Try to merge all masks in a given table. This is used to merge */
/* all counter masks into independent counter "paths". */
/* */
static FT_Error
ps_mask_table_merge_all( PS_Mask_Table table,
FT_Memory memory )
{
FT_Int index1, index2;
FT_Error error = PSH_Err_Ok;
for ( index1 = table->num_masks - 1; index1 > 0; index1-- )
{
for ( index2 = index1 - 1; index2 >= 0; index2-- )
{
if ( ps_mask_table_test_intersect( table, index1, index2 ) )
{
error = ps_mask_table_merge( table, index2, index1, memory );
if ( error )
goto Exit;
break;
}
}
}
Exit:
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PS_DIMENSION MANAGEMENT *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* finalize a given dimension */
static void
ps_dimension_done( PS_Dimension dimension,
FT_Memory memory )
{
ps_mask_table_done( &dimension->counters, memory );
ps_mask_table_done( &dimension->masks, memory );
ps_hint_table_done( &dimension->hints, memory );
}
/* initialize a given dimension */
static void
ps_dimension_init( PS_Dimension dimension )
{
dimension->hints.num_hints = 0;
dimension->masks.num_masks = 0;
dimension->counters.num_masks = 0;
}
#if 0
/* set a bit at a given index in the current hint mask */
static FT_Error
ps_dimension_set_mask_bit( PS_Dimension dim,
FT_UInt idx,
FT_Memory memory )
{
PS_Mask mask;
FT_Error error = PSH_Err_Ok;
/* get last hint mask */
error = ps_mask_table_last( &dim->masks, memory, &mask );
if ( error )
goto Exit;
error = ps_mask_set_bit( mask, idx, memory );
Exit:
return error;
}
#endif
/* set the end point in a mask, called from "End" & "Reset" methods */
static void
ps_dimension_end_mask( PS_Dimension dim,
FT_UInt end_point )
{
FT_UInt count = dim->masks.num_masks;
PS_Mask mask;
if ( count > 0 )
{
mask = dim->masks.masks + count - 1;
mask->end_point = end_point;
}
}
/* set the end point in the current mask, then create a new empty one */
/* (called by "Reset" method) */
static FT_Error
ps_dimension_reset_mask( PS_Dimension dim,
FT_UInt end_point,
FT_Memory memory )
{
PS_Mask mask;
/* end current mask */
ps_dimension_end_mask( dim, end_point );
/* allocate new one */
return ps_mask_table_alloc( &dim->masks, memory, &mask );
}
/* set a new mask, called from the "T2Stem" method */
static FT_Error
ps_dimension_set_mask_bits( PS_Dimension dim,
const FT_Byte* source,
FT_UInt source_pos,
FT_UInt source_bits,
FT_UInt end_point,
FT_Memory memory )
{
FT_Error error = PSH_Err_Ok;
/* reset current mask, if any */
error = ps_dimension_reset_mask( dim, end_point, memory );
if ( error )
goto Exit;
/* set bits in new mask */
error = ps_mask_table_set_bits( &dim->masks, source,
source_pos, source_bits, memory );
Exit:
return error;
}
/* add a new single stem (called from "T1Stem" method) */
static FT_Error
ps_dimension_add_t1stem( PS_Dimension dim,
FT_Int pos,
FT_Int len,
FT_Memory memory,
FT_Int *aindex )
{
FT_Error error = PSH_Err_Ok;
FT_UInt flags = 0;
/* detect ghost stem */
if ( len < 0 )
{
flags |= PS_HINT_FLAG_GHOST;
if ( len == -21 )
{
flags |= PS_HINT_FLAG_BOTTOM;
pos += len;
}
len = 0;
}
if ( aindex )
*aindex = -1;
/* now, lookup stem in the current hints table */
{
PS_Mask mask;
FT_UInt idx;
FT_UInt max = dim->hints.num_hints;
PS_Hint hint = dim->hints.hints;
for ( idx = 0; idx < max; idx++, hint++ )
{
if ( hint->pos == pos && hint->len == len )
break;
}
/* we need to create a new hint in the table */
if ( idx >= max )
{
error = ps_hint_table_alloc( &dim->hints, memory, &hint );
if ( error )
goto Exit;
hint->pos = pos;
hint->len = len;
hint->flags = flags;
}
/* now, store the hint in the current mask */
error = ps_mask_table_last( &dim->masks, memory, &mask );
if ( error )
goto Exit;
error = ps_mask_set_bit( mask, idx, memory );
if ( error )
goto Exit;
if ( aindex )
*aindex = (FT_Int)idx;
}
Exit:
return error;
}
/* add a "hstem3/vstem3" counter to our dimension table */
static FT_Error
ps_dimension_add_counter( PS_Dimension dim,
FT_Int hint1,
FT_Int hint2,
FT_Int hint3,
FT_Memory memory )
{
FT_Error error = PSH_Err_Ok;
FT_UInt count = dim->counters.num_masks;
PS_Mask counter = dim->counters.masks;
/* try to find an existing counter mask that already uses */
/* one of these stems here */
for ( ; count > 0; count--, counter++ )
{
if ( ps_mask_test_bit( counter, hint1 ) ||
ps_mask_test_bit( counter, hint2 ) ||
ps_mask_test_bit( counter, hint3 ) )
break;
}
/* create a new counter when needed */
if ( count == 0 )
{
error = ps_mask_table_alloc( &dim->counters, memory, &counter );
if ( error )
goto Exit;
}
/* now, set the bits for our hints in the counter mask */
error = ps_mask_set_bit( counter, hint1, memory );
if ( error )
goto Exit;
error = ps_mask_set_bit( counter, hint2, memory );
if ( error )
goto Exit;
error = ps_mask_set_bit( counter, hint3, memory );
if ( error )
goto Exit;
Exit:
return error;
}
/* end of recording session for a given dimension */
static FT_Error
ps_dimension_end( PS_Dimension dim,
FT_UInt end_point,
FT_Memory memory )
{
/* end hint mask table */
ps_dimension_end_mask( dim, end_point );
/* merge all counter masks into independent "paths" */
return ps_mask_table_merge_all( &dim->counters, memory );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PS_RECORDER MANAGEMENT *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* destroy hints */
FT_LOCAL( void )
ps_hints_done( PS_Hints hints )
{
FT_Memory memory = hints->memory;
ps_dimension_done( &hints->dimension[0], memory );
ps_dimension_done( &hints->dimension[1], memory );
hints->error = PSH_Err_Ok;
hints->memory = 0;
}
FT_LOCAL( FT_Error )
ps_hints_init( PS_Hints hints,
FT_Memory memory )
{
FT_MEM_ZERO( hints, sizeof ( *hints ) );
hints->memory = memory;
return PSH_Err_Ok;
}
/* initialize a hints for a new session */
static void
ps_hints_open( PS_Hints hints,
PS_Hint_Type hint_type )
{
switch ( hint_type )
{
case PS_HINT_TYPE_1:
case PS_HINT_TYPE_2:
hints->error = PSH_Err_Ok;
hints->hint_type = hint_type;
ps_dimension_init( &hints->dimension[0] );
ps_dimension_init( &hints->dimension[1] );
break;
default:
hints->error = PSH_Err_Invalid_Argument;
hints->hint_type = hint_type;
FT_TRACE0(( "ps_hints_open: invalid charstring type\n" ));
break;
}
}
/* add one or more stems to the current hints table */
static void
ps_hints_stem( PS_Hints hints,
FT_Int dimension,
FT_UInt count,
FT_Long* stems )
{
if ( !hints->error )
{
/* limit "dimension" to 0..1 */
if ( dimension < 0 || dimension > 1 )
{
FT_TRACE0(( "ps_hints_stem: invalid dimension (%d) used\n",
dimension ));
dimension = ( dimension != 0 );
}
/* record the stems in the current hints/masks table */
switch ( hints->hint_type )
{
/* Type 1 "hstem" or "vstem" operator */
case PS_HINT_TYPE_1:
/* Type 2 "hstem" or "vstem" operator */
case PS_HINT_TYPE_2:
{
PS_Dimension dim = &hints->dimension[dimension];
for ( ; count > 0; count--, stems += 2 )
{
FT_Error error;
FT_Memory memory = hints->memory;
error = ps_dimension_add_t1stem(
dim, (FT_Int)stems[0], (FT_Int)stems[1],
memory, NULL );
if ( error )
{
FT_ERROR(( "ps_hints_stem: could not add stem"
" (%d,%d) to hints table\n", stems[0], stems[1] ));
hints->error = error;
return;
}
}
break;
}
default:
FT_TRACE0(( "ps_hints_stem: called with invalid hint type (%d)\n",
hints->hint_type ));
break;
}
}
}
/* add one Type1 counter stem to the current hints table */
static void
ps_hints_t1stem3( PS_Hints hints,
FT_Int dimension,
FT_Fixed* stems )
{
FT_Error error = PSH_Err_Ok;
if ( !hints->error )
{
PS_Dimension dim;
FT_Memory memory = hints->memory;
FT_Int count;
FT_Int idx[3];
/* limit "dimension" to 0..1 */
if ( dimension < 0 || dimension > 1 )
{
FT_TRACE0(( "ps_hints_t1stem3: invalid dimension (%d) used\n",
dimension ));
dimension = ( dimension != 0 );
}
dim = &hints->dimension[dimension];
/* there must be 6 elements in the 'stem' array */
if ( hints->hint_type == PS_HINT_TYPE_1 )
{
/* add the three stems to our hints/masks table */
for ( count = 0; count < 3; count++, stems += 2 )
{
error = ps_dimension_add_t1stem( dim,
(FT_Int)FIXED_TO_INT( stems[0] ),
(FT_Int)FIXED_TO_INT( stems[1] ),
memory, &idx[count] );
if ( error )
goto Fail;
}
/* now, add the hints to the counters table */
error = ps_dimension_add_counter( dim, idx[0], idx[1], idx[2],
memory );
if ( error )
goto Fail;
}
else
{
FT_ERROR(( "ps_hints_t1stem3: called with invalid hint type\n" ));
error = PSH_Err_Invalid_Argument;
goto Fail;
}
}
return;
Fail:
FT_ERROR(( "ps_hints_t1stem3: could not add counter stems to table\n" ));
hints->error = error;
}
/* reset hints (only with Type 1 hints) */
static void
ps_hints_t1reset( PS_Hints hints,
FT_UInt end_point )
{
FT_Error error = PSH_Err_Ok;
if ( !hints->error )
{
FT_Memory memory = hints->memory;
if ( hints->hint_type == PS_HINT_TYPE_1 )
{
error = ps_dimension_reset_mask( &hints->dimension[0],
end_point, memory );
if ( error )
goto Fail;
error = ps_dimension_reset_mask( &hints->dimension[1],
end_point, memory );
if ( error )
goto Fail;
}
else
{
/* invalid hint type */
error = PSH_Err_Invalid_Argument;
goto Fail;
}
}
return;
Fail:
hints->error = error;
}
/* Type2 "hintmask" operator, add a new hintmask to each direction */
static void
ps_hints_t2mask( PS_Hints hints,
FT_UInt end_point,
FT_UInt bit_count,
const FT_Byte* bytes )
{
FT_Error error;
if ( !hints->error )
{
PS_Dimension dim = hints->dimension;
FT_Memory memory = hints->memory;
FT_UInt count1 = dim[0].hints.num_hints;
FT_UInt count2 = dim[1].hints.num_hints;
/* check bit count; must be equal to current total hint count */
if ( bit_count != count1 + count2 )
{
FT_TRACE0(( "ps_hints_t2mask:"
" called with invalid bitcount %d (instead of %d)\n",
bit_count, count1 + count2 ));
/* simply ignore the operator */
return;
}
/* set-up new horizontal and vertical hint mask now */
error = ps_dimension_set_mask_bits( &dim[0], bytes, count2, count1,
end_point, memory );
if ( error )
goto Fail;
error = ps_dimension_set_mask_bits( &dim[1], bytes, 0, count2,
end_point, memory );
if ( error )
goto Fail;
}
return;
Fail:
hints->error = error;
}
static void
ps_hints_t2counter( PS_Hints hints,
FT_UInt bit_count,
const FT_Byte* bytes )
{
FT_Error error;
if ( !hints->error )
{
PS_Dimension dim = hints->dimension;
FT_Memory memory = hints->memory;
FT_UInt count1 = dim[0].hints.num_hints;
FT_UInt count2 = dim[1].hints.num_hints;
/* check bit count, must be equal to current total hint count */
if ( bit_count != count1 + count2 )
{
FT_TRACE0(( "ps_hints_t2counter:"
" called with invalid bitcount %d (instead of %d)\n",
bit_count, count1 + count2 ));
/* simply ignore the operator */
return;
}
/* set-up new horizontal and vertical hint mask now */
error = ps_dimension_set_mask_bits( &dim[0], bytes, 0, count1,
0, memory );
if ( error )
goto Fail;
error = ps_dimension_set_mask_bits( &dim[1], bytes, count1, count2,
0, memory );
if ( error )
goto Fail;
}
return;
Fail:
hints->error = error;
}
/* end recording session */
static FT_Error
ps_hints_close( PS_Hints hints,
FT_UInt end_point )
{
FT_Error error;
error = hints->error;
if ( !error )
{
FT_Memory memory = hints->memory;
PS_Dimension dim = hints->dimension;
error = ps_dimension_end( &dim[0], end_point, memory );
if ( !error )
{
error = ps_dimension_end( &dim[1], end_point, memory );
}
}
#ifdef DEBUG_HINTER
if ( !error )
ps_debug_hints = hints;
#endif
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE 1 HINTS RECORDING INTERFACE *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static void
t1_hints_open( T1_Hints hints )
{
ps_hints_open( (PS_Hints)hints, PS_HINT_TYPE_1 );
}
static void
t1_hints_stem( T1_Hints hints,
FT_Int dimension,
FT_Fixed* coords )
{
FT_Pos stems[2];
stems[0] = FIXED_TO_INT( coords[0] );
stems[1] = FIXED_TO_INT( coords[1] );
ps_hints_stem( (PS_Hints)hints, dimension, 1, stems );
}
FT_LOCAL_DEF( void )
t1_hints_funcs_init( T1_Hints_FuncsRec* funcs )
{
FT_MEM_ZERO( (char*)funcs, sizeof ( *funcs ) );
funcs->open = (T1_Hints_OpenFunc) t1_hints_open;
funcs->close = (T1_Hints_CloseFunc) ps_hints_close;
funcs->stem = (T1_Hints_SetStemFunc) t1_hints_stem;
funcs->stem3 = (T1_Hints_SetStem3Func)ps_hints_t1stem3;
funcs->reset = (T1_Hints_ResetFunc) ps_hints_t1reset;
funcs->apply = (T1_Hints_ApplyFunc) ps_hints_apply;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE 2 HINTS RECORDING INTERFACE *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static void
t2_hints_open( T2_Hints hints )
{
ps_hints_open( (PS_Hints)hints, PS_HINT_TYPE_2 );
}
static void
t2_hints_stems( T2_Hints hints,
FT_Int dimension,
FT_Int count,
FT_Fixed* coords )
{
FT_Pos stems[32], y, n;
FT_Int total = count;
y = 0;
while ( total > 0 )
{
/* determine number of stems to write */
count = total;
if ( count > 16 )
count = 16;
/* compute integer stem positions in font units */
for ( n = 0; n < count * 2; n++ )
{
y += coords[n];
stems[n] = FIXED_TO_INT( y );
}
/* compute lengths */
for ( n = 0; n < count * 2; n += 2 )
stems[n + 1] = stems[n + 1] - stems[n];
/* add them to the current dimension */
ps_hints_stem( (PS_Hints)hints, dimension, count, stems );
total -= count;
}
}
FT_LOCAL_DEF( void )
t2_hints_funcs_init( T2_Hints_FuncsRec* funcs )
{
FT_MEM_ZERO( funcs, sizeof ( *funcs ) );
funcs->open = (T2_Hints_OpenFunc) t2_hints_open;
funcs->close = (T2_Hints_CloseFunc) ps_hints_close;
funcs->stems = (T2_Hints_StemsFunc) t2_hints_stems;
funcs->hintmask= (T2_Hints_MaskFunc) ps_hints_t2mask;
funcs->counter = (T2_Hints_CounterFunc)ps_hints_t2counter;
funcs->apply = (T2_Hints_ApplyFunc) ps_hints_apply;
}
/* END */
/***************************************************************************/
/* */
/* pshglob.c */
/* */
/* PostScript hinter global hinting management (body). */
/* Inspired by the new auto-hinter module. */
/* */
/* Copyright 2001-2004, 2006, 2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used */
/* modified and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifdef DEBUG_HINTER
PSH_Globals ps_debug_globals = 0;
#endif
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** STANDARD WIDTHS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* scale the widths/heights table */
static void
psh_globals_scale_widths( PSH_Globals globals,
FT_UInt direction )
{
PSH_Dimension dim = &globals->dimension[direction];
PSH_Widths stdw = &dim->stdw;
FT_UInt count = stdw->count;
PSH_Width width = stdw->widths;
/* standard width/height */
PSH_Width stand = width;
FT_Fixed scale = dim->scale_mult;
if ( count > 0 )
{
width->cur = FT_MulFix( width->org, scale );
width->fit = FT_PIX_ROUND( width->cur );
width++;
count--;
for ( ; count > 0; count--, width++ )
{
FT_Pos w, dist;
w = FT_MulFix( width->org, scale );
dist = w - stand->cur;
if ( dist < 0 )
dist = -dist;
if ( dist < 128 )
w = stand->cur;
width->cur = w;
width->fit = FT_PIX_ROUND( w );
}
}
}
#if 0
/* org_width is is font units, result in device pixels, 26.6 format */
FT_LOCAL_DEF( FT_Pos )
psh_dimension_snap_width( PSH_Dimension dimension,
FT_Int org_width )
{
FT_UInt n;
FT_Pos width = FT_MulFix( org_width, dimension->scale_mult );
FT_Pos best = 64 + 32 + 2;
FT_Pos reference = width;
for ( n = 0; n < dimension->stdw.count; n++ )
{
FT_Pos w;
FT_Pos dist;
w = dimension->stdw.widths[n].cur;
dist = width - w;
if ( dist < 0 )
dist = -dist;
if ( dist < best )
{
best = dist;
reference = w;
}
}
if ( width >= reference )
{
width -= 0x21;
if ( width < reference )
width = reference;
}
else
{
width += 0x21;
if ( width > reference )
width = reference;
}
return width;
}
/* 0 */
#endif
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** BLUE ZONES *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static void
psh_blues_set_zones_0( PSH_Blues target,
FT_Bool is_others,
FT_UInt read_count,
FT_Short* read,
PSH_Blue_Table top_table,
PSH_Blue_Table bot_table )
{
FT_UInt count_top = top_table->count;
FT_UInt count_bot = bot_table->count;
FT_Bool first = 1;
FT_UNUSED( target );
for ( ; read_count > 1; read_count -= 2 )
{
FT_Int reference, delta;
FT_UInt count;
PSH_Blue_Zone zones, zone;
FT_Bool top;
/* read blue zone entry, and select target top/bottom zone */
top = 0;
if ( first || is_others )
{
reference = read[1];
delta = read[0] - reference;
zones = bot_table->zones;
count = count_bot;
first = 0;
}
else
{
reference = read[0];
delta = read[1] - reference;
zones = top_table->zones;
count = count_top;
top = 1;
}
/* insert into sorted table */
zone = zones;
for ( ; count > 0; count--, zone++ )
{
if ( reference < zone->org_ref )
break;
if ( reference == zone->org_ref )
{
FT_Int delta0 = zone->org_delta;
/* we have two zones on the same reference position -- */
/* only keep the largest one */
if ( delta < 0 )
{
if ( delta < delta0 )
zone->org_delta = delta;
}
else
{
if ( delta > delta0 )
zone->org_delta = delta;
}
goto Skip;
}
}
for ( ; count > 0; count-- )
zone[count] = zone[count-1];
zone->org_ref = reference;
zone->org_delta = delta;
if ( top )
count_top++;
else
count_bot++;
Skip:
read += 2;
}
top_table->count = count_top;
bot_table->count = count_bot;
}
/* Re-read blue zones from the original fonts and store them into out */
/* private structure. This function re-orders, sanitizes and */
/* fuzz-expands the zones as well. */
static void
psh_blues_set_zones( PSH_Blues target,
FT_UInt count,
FT_Short* blues,
FT_UInt count_others,
FT_Short* other_blues,
FT_Int fuzz,
FT_Int family )
{
PSH_Blue_Table top_table, bot_table;
FT_Int count_top, count_bot;
if ( family )
{
top_table = &target->family_top;
bot_table = &target->family_bottom;
}
else
{
top_table = &target->normal_top;
bot_table = &target->normal_bottom;
}
/* read the input blue zones, and build two sorted tables */
/* (one for the top zones, the other for the bottom zones) */
top_table->count = 0;
bot_table->count = 0;
/* first, the blues */
psh_blues_set_zones_0( target, 0,
count, blues, top_table, bot_table );
psh_blues_set_zones_0( target, 1,
count_others, other_blues, top_table, bot_table );
count_top = top_table->count;
count_bot = bot_table->count;
/* sanitize top table */
if ( count_top > 0 )
{
PSH_Blue_Zone zone = top_table->zones;
for ( count = count_top; count > 0; count--, zone++ )
{
FT_Int delta;
if ( count > 1 )
{
delta = zone[1].org_ref - zone[0].org_ref;
if ( zone->org_delta > delta )
zone->org_delta = delta;
}
zone->org_bottom = zone->org_ref;
zone->org_top = zone->org_delta + zone->org_ref;
}
}
/* sanitize bottom table */
if ( count_bot > 0 )
{
PSH_Blue_Zone zone = bot_table->zones;
for ( count = count_bot; count > 0; count--, zone++ )
{
FT_Int delta;
if ( count > 1 )
{
delta = zone[0].org_ref - zone[1].org_ref;
if ( zone->org_delta < delta )
zone->org_delta = delta;
}
zone->org_top = zone->org_ref;
zone->org_bottom = zone->org_delta + zone->org_ref;
}
}
/* expand top and bottom tables with blue fuzz */
{
FT_Int dim, top, bot, delta;
PSH_Blue_Zone zone;
zone = top_table->zones;
count = count_top;
for ( dim = 1; dim >= 0; dim-- )
{
if ( count > 0 )
{
/* expand the bottom of the lowest zone normally */
zone->org_bottom -= fuzz;
/* expand the top and bottom of intermediate zones; */
/* checking that the interval is smaller than the fuzz */
top = zone->org_top;
for ( count--; count > 0; count-- )
{
bot = zone[1].org_bottom;
delta = bot - top;
if ( delta < 2 * fuzz )
zone[0].org_top = zone[1].org_bottom = top + delta / 2;
else
{
zone[0].org_top = top + fuzz;
zone[1].org_bottom = bot - fuzz;
}
zone++;
top = zone->org_top;
}
/* expand the top of the highest zone normally */
zone->org_top = top + fuzz;
}
zone = bot_table->zones;
count = count_bot;
}
}
}
/* reset the blues table when the device transform changes */
static void
psh_blues_scale_zones( PSH_Blues blues,
FT_Fixed scale,
FT_Pos delta )
{
FT_UInt count;
FT_UInt num;
PSH_Blue_Table table = 0;
/* */
/* Determine whether we need to suppress overshoots or */
/* not. We simply need to compare the vertical scale */
/* parameter to the raw bluescale value. Here is why: */
/* */
/* We need to suppress overshoots for all pointsizes. */
/* At 300dpi that satisfies: */
/* */
/* pointsize < 240*bluescale + 0.49 */
/* */
/* This corresponds to: */
/* */
/* pixelsize < 1000*bluescale + 49/24 */
/* */
/* scale*EM_Size < 1000*bluescale + 49/24 */
/* */
/* However, for normal Type 1 fonts, EM_Size is 1000! */
/* We thus only check: */
/* */
/* scale < bluescale + 49/24000 */
/* */
/* which we shorten to */
/* */
/* "scale < bluescale" */
/* */
/* Note that `blue_scale' is stored 1000 times its real */
/* value, and that `scale' converts from font units to */
/* fractional pixels. */
/* */
/* 1000 / 64 = 125 / 8 */
if ( scale >= 0x20C49BAL )
blues->no_overshoots = FT_BOOL( scale < blues->blue_scale * 8 / 125 );
else
blues->no_overshoots = FT_BOOL( scale * 125 < blues->blue_scale * 8 );
/* */
/* The blue threshold is the font units distance under */
/* which overshoots are suppressed due to the BlueShift */
/* even if the scale is greater than BlueScale. */
/* */
/* It is the smallest distance such that */
/* */
/* dist <= BlueShift && dist*scale <= 0.5 pixels */
/* */
{
FT_Int threshold = blues->blue_shift;
while ( threshold > 0 && FT_MulFix( threshold, scale ) > 32 )
threshold--;
blues->blue_threshold = threshold;
}
for ( num = 0; num < 4; num++ )
{
PSH_Blue_Zone zone;
switch ( num )
{
case 0:
table = &blues->normal_top;
break;
case 1:
table = &blues->normal_bottom;
break;
case 2:
table = &blues->family_top;
break;
default:
table = &blues->family_bottom;
break;
}
zone = table->zones;
count = table->count;
for ( ; count > 0; count--, zone++ )
{
zone->cur_top = FT_MulFix( zone->org_top, scale ) + delta;
zone->cur_bottom = FT_MulFix( zone->org_bottom, scale ) + delta;
zone->cur_ref = FT_MulFix( zone->org_ref, scale ) + delta;
zone->cur_delta = FT_MulFix( zone->org_delta, scale );
/* round scaled reference position */
zone->cur_ref = FT_PIX_ROUND( zone->cur_ref );
#if 0
if ( zone->cur_ref > zone->cur_top )
zone->cur_ref -= 64;
else if ( zone->cur_ref < zone->cur_bottom )
zone->cur_ref += 64;
#endif
}
}
/* process the families now */
for ( num = 0; num < 2; num++ )
{
PSH_Blue_Zone zone1, zone2;
FT_UInt count1, count2;
PSH_Blue_Table normal, family;
switch ( num )
{
case 0:
normal = &blues->normal_top;
family = &blues->family_top;
break;
default:
normal = &blues->normal_bottom;
family = &blues->family_bottom;
}
zone1 = normal->zones;
count1 = normal->count;
for ( ; count1 > 0; count1--, zone1++ )
{
/* try to find a family zone whose reference position is less */
/* than 1 pixel far from the current zone */
zone2 = family->zones;
count2 = family->count;
for ( ; count2 > 0; count2--, zone2++ )
{
FT_Pos Delta;
Delta = zone1->org_ref - zone2->org_ref;
if ( Delta < 0 )
Delta = -Delta;
if ( FT_MulFix( Delta, scale ) < 64 )
{
zone1->cur_top = zone2->cur_top;
zone1->cur_bottom = zone2->cur_bottom;
zone1->cur_ref = zone2->cur_ref;
zone1->cur_delta = zone2->cur_delta;
break;
}
}
}
}
}
/* calculate the maximum height of given blue zones */
static FT_Short
psh_calc_max_height( FT_UInt num,
const FT_Short* values,
FT_Short cur_max )
{
FT_UInt count;
for ( count = 0; count < num; count += 2 )
{
FT_Short cur_height = values[count + 1] - values[count];
if ( cur_height > cur_max )
cur_max = cur_height;
}
return cur_max;
}
FT_LOCAL_DEF( void )
psh_blues_snap_stem( PSH_Blues blues,
FT_Int stem_top,
FT_Int stem_bot,
PSH_Alignment alignment )
{
PSH_Blue_Table table;
FT_UInt count;
FT_Pos delta;
PSH_Blue_Zone zone;
FT_Int no_shoots;
alignment->align = PSH_BLUE_ALIGN_NONE;
no_shoots = blues->no_overshoots;
/* look up stem top in top zones table */
table = &blues->normal_top;
count = table->count;
zone = table->zones;
for ( ; count > 0; count--, zone++ )
{
delta = stem_top - zone->org_bottom;
if ( delta < -blues->blue_fuzz )
break;
if ( stem_top <= zone->org_top + blues->blue_fuzz )
{
if ( no_shoots || delta <= blues->blue_threshold )
{
alignment->align |= PSH_BLUE_ALIGN_TOP;
alignment->align_top = zone->cur_ref;
}
break;
}
}
/* look up stem bottom in bottom zones table */
table = &blues->normal_bottom;
count = table->count;
zone = table->zones + count-1;
for ( ; count > 0; count--, zone-- )
{
delta = zone->org_top - stem_bot;
if ( delta < -blues->blue_fuzz )
break;
if ( stem_bot >= zone->org_bottom - blues->blue_fuzz )
{
if ( no_shoots || delta < blues->blue_threshold )
{
alignment->align |= PSH_BLUE_ALIGN_BOT;
alignment->align_bot = zone->cur_ref;
}
break;
}
}
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** GLOBAL HINTS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static void
psh_globals_destroy( PSH_Globals globals )
{
if ( globals )
{
FT_Memory memory;
memory = globals->memory;
globals->dimension[0].stdw.count = 0;
globals->dimension[1].stdw.count = 0;
globals->blues.normal_top.count = 0;
globals->blues.normal_bottom.count = 0;
globals->blues.family_top.count = 0;
globals->blues.family_bottom.count = 0;
FT_FREE( globals );
#ifdef DEBUG_HINTER
ps_debug_globals = 0;
#endif
}
}
static FT_Error
psh_globals_new( FT_Memory memory,
T1_Private* priv,
PSH_Globals *aglobals )
{
PSH_Globals globals = NULL;
FT_Error error;
if ( !FT_NEW( globals ) )
{
FT_UInt count;
FT_Short* read;
globals->memory = memory;
/* copy standard widths */
{
PSH_Dimension dim = &globals->dimension[1];
PSH_Width write = dim->stdw.widths;
write->org = priv->standard_width[0];
write++;
read = priv->snap_widths;
for ( count = priv->num_snap_widths; count > 0; count-- )
{
write->org = *read;
write++;
read++;
}
dim->stdw.count = priv->num_snap_widths + 1;
}
/* copy standard heights */
{
PSH_Dimension dim = &globals->dimension[0];
PSH_Width write = dim->stdw.widths;
write->org = priv->standard_height[0];
write++;
read = priv->snap_heights;
for ( count = priv->num_snap_heights; count > 0; count-- )
{
write->org = *read;
write++;
read++;
}
dim->stdw.count = priv->num_snap_heights + 1;
}
/* copy blue zones */
psh_blues_set_zones( &globals->blues, priv->num_blue_values,
priv->blue_values, priv->num_other_blues,
priv->other_blues, priv->blue_fuzz, 0 );
psh_blues_set_zones( &globals->blues, priv->num_family_blues,
priv->family_blues, priv->num_family_other_blues,
priv->family_other_blues, priv->blue_fuzz, 1 );
/* limit the BlueScale value to `1 / max_of_blue_zone_heights' */
{
FT_Fixed max_scale;
FT_Short max_height = 1;
max_height = psh_calc_max_height( priv->num_blue_values,
priv->blue_values,
max_height );
max_height = psh_calc_max_height( priv->num_other_blues,
priv->other_blues,
max_height );
max_height = psh_calc_max_height( priv->num_family_blues,
priv->family_blues,
max_height );
max_height = psh_calc_max_height( priv->num_family_other_blues,
priv->family_other_blues,
max_height );
/* BlueScale is scaled 1000 times */
max_scale = FT_DivFix( 1000, max_height );
globals->blues.blue_scale = priv->blue_scale < max_scale
? priv->blue_scale
: max_scale;
}
globals->blues.blue_shift = priv->blue_shift;
globals->blues.blue_fuzz = priv->blue_fuzz;
globals->dimension[0].scale_mult = 0;
globals->dimension[0].scale_delta = 0;
globals->dimension[1].scale_mult = 0;
globals->dimension[1].scale_delta = 0;
#ifdef DEBUG_HINTER
ps_debug_globals = globals;
#endif
}
*aglobals = globals;
return error;
}
FT_LOCAL_DEF( FT_Error )
psh_globals_set_scale( PSH_Globals globals,
FT_Fixed x_scale,
FT_Fixed y_scale,
FT_Fixed x_delta,
FT_Fixed y_delta )
{
PSH_Dimension dim = &globals->dimension[0];
dim = &globals->dimension[0];
if ( x_scale != dim->scale_mult ||
x_delta != dim->scale_delta )
{
dim->scale_mult = x_scale;
dim->scale_delta = x_delta;
psh_globals_scale_widths( globals, 0 );
}
dim = &globals->dimension[1];
if ( y_scale != dim->scale_mult ||
y_delta != dim->scale_delta )
{
dim->scale_mult = y_scale;
dim->scale_delta = y_delta;
psh_globals_scale_widths( globals, 1 );
psh_blues_scale_zones( &globals->blues, y_scale, y_delta );
}
return 0;
}
FT_LOCAL_DEF( void )
psh_globals_funcs_init( PSH_Globals_FuncsRec* funcs )
{
funcs->create = psh_globals_new;
funcs->set_scale = psh_globals_set_scale;
funcs->destroy = psh_globals_destroy;
}
/* END */
/***************************************************************************/
/* */
/* pshalgo.c */
/* */
/* PostScript hinting algorithm (body). */
/* */
/* Copyright 2001-2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used */
/* modified and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#undef FT_COMPONENT
#define FT_COMPONENT trace_pshalgo2
#ifdef DEBUG_HINTER
PSH_Hint_Table ps_debug_hint_table = 0;
PSH_HintFunc ps_debug_hint_func = 0;
PSH_Glyph ps_debug_glyph = 0;
#endif
/* compute inflection points to optimize `S' */
#define COMPUTE_INFLEXS
/* and similar glyphs */
/* slightly increase the contrast of smooth */
#define STRONGER
/* hinting */
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** BASIC HINTS RECORDINGS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* return true if two stem hints overlap */
static FT_Int
psh_hint_overlap( PSH_Hint hint1,
PSH_Hint hint2 )
{
return hint1->org_pos + hint1->org_len >= hint2->org_pos &&
hint2->org_pos + hint2->org_len >= hint1->org_pos;
}
/* destroy hints table */
static void
psh_hint_table_done( PSH_Hint_Table table,
FT_Memory memory )
{
FT_FREE( table->zones );
table->num_zones = 0;
table->zone = 0;
FT_FREE( table->sort );
FT_FREE( table->hints );
table->num_hints = 0;
table->max_hints = 0;
table->sort_global = 0;
}
/* deactivate all hints in a table */
static void
psh_hint_table_deactivate( PSH_Hint_Table table )
{
FT_UInt count = table->max_hints;
PSH_Hint hint = table->hints;
for ( ; count > 0; count--, hint++ )
{
psh_hint_deactivate( hint );
hint->order = -1;
}
}
/* internal function to record a new hint */
static void
psh_hint_table_record( PSH_Hint_Table table,
FT_UInt idx )
{
PSH_Hint hint = table->hints + idx;
if ( idx >= table->max_hints )
{
FT_TRACE0(( "psh_hint_table_record: invalid hint index %d\n", idx ));
return;
}
/* ignore active hints */
if ( psh_hint_is_active( hint ) )
return;
psh_hint_activate( hint );
/* now scan the current active hint set to check */
/* whether `hint' overlaps with another hint */
{
PSH_Hint* sorted = table->sort_global;
FT_UInt count = table->num_hints;
PSH_Hint hint2;
hint->parent = 0;
for ( ; count > 0; count--, sorted++ )
{
hint2 = sorted[0];
if ( psh_hint_overlap( hint, hint2 ) )
{
hint->parent = hint2;
break;
}
}
}
if ( table->num_hints < table->max_hints )
table->sort_global[table->num_hints++] = hint;
else
FT_TRACE0(( "psh_hint_table_record: too many sorted hints! BUG!\n" ));
}
static void
psh_hint_table_record_mask( PSH_Hint_Table table,
PS_Mask hint_mask )
{
FT_Int mask = 0, val = 0;
FT_Byte* cursor = hint_mask->bytes;
FT_UInt idx, limit;
limit = hint_mask->num_bits;
for ( idx = 0; idx < limit; idx++ )
{
if ( mask == 0 )
{
val = *cursor++;
mask = 0x80;
}
if ( val & mask )
psh_hint_table_record( table, idx );
mask >>= 1;
}
}
/* create hints table */
static FT_Error
psh_hint_table_init( PSH_Hint_Table table,
PS_Hint_Table hints,
PS_Mask_Table hint_masks,
PS_Mask_Table counter_masks,
FT_Memory memory )
{
FT_UInt count;
FT_Error error;
FT_UNUSED( counter_masks );
count = hints->num_hints;
/* allocate our tables */
if ( FT_NEW_ARRAY( table->sort, 2 * count ) ||
FT_NEW_ARRAY( table->hints, count ) ||
FT_NEW_ARRAY( table->zones, 2 * count + 1 ) )
goto Exit;
table->max_hints = count;
table->sort_global = table->sort + count;
table->num_hints = 0;
table->num_zones = 0;
table->zone = 0;
/* initialize the `table->hints' array */
{
PSH_Hint write = table->hints;
PS_Hint read = hints->hints;
for ( ; count > 0; count--, write++, read++ )
{
write->org_pos = read->pos;
write->org_len = read->len;
write->flags = read->flags;
}
}
/* we now need to determine the initial `parent' stems; first */
/* activate the hints that are given by the initial hint masks */
if ( hint_masks )
{
PS_Mask mask = hint_masks->masks;
count = hint_masks->num_masks;
table->hint_masks = hint_masks;
for ( ; count > 0; count--, mask++ )
psh_hint_table_record_mask( table, mask );
}
/* finally, do a linear parse in case some hints were left alone */
if ( table->num_hints != table->max_hints )
{
FT_UInt idx;
FT_TRACE0(( "psh_hint_table_init: missing/incorrect hint masks\n" ));
count = table->max_hints;
for ( idx = 0; idx < count; idx++ )
psh_hint_table_record( table, idx );
}
Exit:
return error;
}
static void
psh_hint_table_activate_mask( PSH_Hint_Table table,
PS_Mask hint_mask )
{
FT_Int mask = 0, val = 0;
FT_Byte* cursor = hint_mask->bytes;
FT_UInt idx, limit, count;
limit = hint_mask->num_bits;
count = 0;
psh_hint_table_deactivate( table );
for ( idx = 0; idx < limit; idx++ )
{
if ( mask == 0 )
{
val = *cursor++;
mask = 0x80;
}
if ( val & mask )
{
PSH_Hint hint = &table->hints[idx];
if ( !psh_hint_is_active( hint ) )
{
FT_UInt count2;
#if 0
PSH_Hint* sort = table->sort;
PSH_Hint hint2;
for ( count2 = count; count2 > 0; count2--, sort++ )
{
hint2 = sort[0];
if ( psh_hint_overlap( hint, hint2 ) )
FT_TRACE0(( "psh_hint_table_activate_mask:"
" found overlapping hints\n" ))
}
#else
count2 = 0;
#endif
if ( count2 == 0 )
{
psh_hint_activate( hint );
if ( count < table->max_hints )
table->sort[count++] = hint;
else
FT_TRACE0(( "psh_hint_tableactivate_mask:"
" too many active hints\n" ));
}
}
}
mask >>= 1;
}
table->num_hints = count;
/* now, sort the hints; they are guaranteed to not overlap */
/* so we can compare their "org_pos" field directly */
{
FT_Int i1, i2;
PSH_Hint hint1, hint2;
PSH_Hint* sort = table->sort;
/* a simple bubble sort will do, since in 99% of cases, the hints */
/* will be already sorted -- and the sort will be linear */
for ( i1 = 1; i1 < (FT_Int)count; i1++ )
{
hint1 = sort[i1];
for ( i2 = i1 - 1; i2 >= 0; i2-- )
{
hint2 = sort[i2];
if ( hint2->org_pos < hint1->org_pos )
break;
sort[i2 + 1] = hint2;
sort[i2] = hint1;
}
}
}
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** HINTS GRID-FITTING AND OPTIMIZATION *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
#if 1
static FT_Pos
psh_dimension_quantize_len( PSH_Dimension dim,
FT_Pos len,
FT_Bool do_snapping )
{
if ( len <= 64 )
len = 64;
else
{
FT_Pos delta = len - dim->stdw.widths[0].cur;
if ( delta < 0 )
delta = -delta;
if ( delta < 40 )
{
len = dim->stdw.widths[0].cur;
if ( len < 48 )
len = 48;
}
if ( len < 3 * 64 )
{
delta = ( len & 63 );
len &= -64;
if ( delta < 10 )
len += delta;
else if ( delta < 32 )
len += 10;
else if ( delta < 54 )
len += 54;
else
len += delta;
}
else
len = FT_PIX_ROUND( len );
}
if ( do_snapping )
len = FT_PIX_ROUND( len );
return len;
}
/* 0 */
#endif
#ifdef DEBUG_HINTER
static void
ps_simple_scale( PSH_Hint_Table table,
FT_Fixed scale,
FT_Fixed delta,
FT_Int dimension )
{
PSH_Hint hint;
FT_UInt count;
for ( count = 0; count < table->max_hints; count++ )
{
hint = table->hints + count;
hint->cur_pos = FT_MulFix( hint->org_pos, scale ) + delta;
hint->cur_len = FT_MulFix( hint->org_len, scale );
if ( ps_debug_hint_func )
ps_debug_hint_func( hint, dimension );
}
}
/* DEBUG_HINTER */
#endif
static FT_Fixed
psh_hint_snap_stem_side_delta( FT_Fixed pos,
FT_Fixed len )
{
FT_Fixed delta1 = FT_PIX_ROUND( pos ) - pos;
FT_Fixed delta2 = FT_PIX_ROUND( pos + len ) - pos - len;
if ( FT_ABS( delta1 ) <= FT_ABS( delta2 ) )
return delta1;
else
return delta2;
}
static void
psh_hint_align( PSH_Hint hint,
PSH_Globals globals,
FT_Int dimension,
PSH_Glyph glyph )
{
PSH_Dimension dim = &globals->dimension[dimension];
FT_Fixed scale = dim->scale_mult;
FT_Fixed delta = dim->scale_delta;
if ( !psh_hint_is_fitted( hint ) )
{
FT_Pos pos = FT_MulFix( hint->org_pos, scale ) + delta;
FT_Pos len = FT_MulFix( hint->org_len, scale );
FT_Int do_snapping;
FT_Pos fit_len;
PSH_AlignmentRec align;
/* ignore stem alignments when requested through the hint flags */
if ( ( dimension == 0 && !glyph->do_horz_hints ) ||
( dimension == 1 && !glyph->do_vert_hints ) )
{
hint->cur_pos = pos;
hint->cur_len = len;
psh_hint_set_fitted( hint );
return;
}
/* perform stem snapping when requested - this is necessary
* for monochrome and LCD hinting modes only
*/
do_snapping = ( dimension == 0 && glyph->do_horz_snapping ) ||
( dimension == 1 && glyph->do_vert_snapping );
hint->cur_len = fit_len = len;
/* check blue zones for horizontal stems */
align.align = PSH_BLUE_ALIGN_NONE;
align.align_bot = align.align_top = 0;
if ( dimension == 1 )
psh_blues_snap_stem( &globals->blues,
hint->org_pos + hint->org_len,
hint->org_pos,
&align );
switch ( align.align )
{
case PSH_BLUE_ALIGN_TOP:
/* the top of the stem is aligned against a blue zone */
hint->cur_pos = align.align_top - fit_len;
break;
case PSH_BLUE_ALIGN_BOT:
/* the bottom of the stem is aligned against a blue zone */
hint->cur_pos = align.align_bot;
break;
case PSH_BLUE_ALIGN_TOP | PSH_BLUE_ALIGN_BOT:
/* both edges of the stem are aligned against blue zones */
hint->cur_pos = align.align_bot;
hint->cur_len = align.align_top - align.align_bot;
break;
default:
{
PSH_Hint parent = hint->parent;
if ( parent )
{
FT_Pos par_org_center, par_cur_center;
FT_Pos cur_org_center, cur_delta;
/* ensure that parent is already fitted */
if ( !psh_hint_is_fitted( parent ) )
psh_hint_align( parent, globals, dimension, glyph );
/* keep original relation between hints, this is, use the */
/* scaled distance between the centers of the hints to */
/* compute the new position */
par_org_center = parent->org_pos + ( parent->org_len >> 1 );
par_cur_center = parent->cur_pos + ( parent->cur_len >> 1 );
cur_org_center = hint->org_pos + ( hint->org_len >> 1 );
cur_delta = FT_MulFix( cur_org_center - par_org_center, scale );
pos = par_cur_center + cur_delta - ( len >> 1 );
}
hint->cur_pos = pos;
hint->cur_len = fit_len;
/* Stem adjustment tries to snap stem widths to standard
* ones. This is important to prevent unpleasant rounding
* artefacts.
*/
if ( glyph->do_stem_adjust )
{
if ( len <= 64 )
{
/* the stem is less than one pixel; we will center it
* around the nearest pixel center
*/
if ( len >= 32 )
{
/* This is a special case where we also widen the stem
* and align it to the pixel grid.
*
* stem_center = pos + (len/2)
* nearest_pixel_center = FT_ROUND(stem_center-32)+32
* new_pos = nearest_pixel_center-32
* = FT_ROUND(stem_center-32)
* = FT_FLOOR(stem_center-32+32)
* = FT_FLOOR(stem_center)
* new_len = 64
*/
pos = FT_PIX_FLOOR( pos + ( len >> 1 ) );
len = 64;
}
else if ( len > 0 )
{
/* This is a very small stem; we simply align it to the
* pixel grid, trying to find the minimum displacement.
*
* left = pos
* right = pos + len
* left_nearest_edge = ROUND(pos)
* right_nearest_edge = ROUND(right)
*
* if ( ABS(left_nearest_edge - left) <=
* ABS(right_nearest_edge - right) )
* new_pos = left
* else
* new_pos = right
*/
FT_Pos left_nearest = FT_PIX_ROUND( pos );
FT_Pos right_nearest = FT_PIX_ROUND( pos + len );
FT_Pos left_disp = left_nearest - pos;
FT_Pos right_disp = right_nearest - ( pos + len );
if ( left_disp < 0 )
left_disp = -left_disp;
if ( right_disp < 0 )
right_disp = -right_disp;
if ( left_disp <= right_disp )
pos = left_nearest;
else
pos = right_nearest;
}
else
{
/* this is a ghost stem; we simply round it */
pos = FT_PIX_ROUND( pos );
}
}
else
{
len = psh_dimension_quantize_len( dim, len, 0 );
}
}
/* now that we have a good hinted stem width, try to position */
/* the stem along a pixel grid integer coordinate */
hint->cur_pos = pos + psh_hint_snap_stem_side_delta( pos, len );
hint->cur_len = len;
}
}
if ( do_snapping )
{
pos = hint->cur_pos;
len = hint->cur_len;
if ( len < 64 )
len = 64;
else
len = FT_PIX_ROUND( len );
switch ( align.align )
{
case PSH_BLUE_ALIGN_TOP:
hint->cur_pos = align.align_top - len;
hint->cur_len = len;
break;
case PSH_BLUE_ALIGN_BOT:
hint->cur_len = len;
break;
case PSH_BLUE_ALIGN_BOT | PSH_BLUE_ALIGN_TOP:
/* don't touch */
break;
default:
hint->cur_len = len;
if ( len & 64 )
pos = FT_PIX_FLOOR( pos + ( len >> 1 ) ) + 32;
else
pos = FT_PIX_ROUND( pos + ( len >> 1 ) );
hint->cur_pos = pos - ( len >> 1 );
hint->cur_len = len;
}
}
psh_hint_set_fitted( hint );
#ifdef DEBUG_HINTER
if ( ps_debug_hint_func )
ps_debug_hint_func( hint, dimension );
#endif
}
}
/* not used for now, experimental */
#if 0
/*
* A variant to perform "light" hinting (i.e. FT_RENDER_MODE_LIGHT)
* of stems
*/
static void
psh_hint_align_light( PSH_Hint hint,
PSH_Globals globals,
FT_Int dimension,
PSH_Glyph glyph )
{
PSH_Dimension dim = &globals->dimension[dimension];
FT_Fixed scale = dim->scale_mult;
FT_Fixed delta = dim->scale_delta;
if ( !psh_hint_is_fitted( hint ) )
{
FT_Pos pos = FT_MulFix( hint->org_pos, scale ) + delta;
FT_Pos len = FT_MulFix( hint->org_len, scale );
FT_Pos fit_len;
PSH_AlignmentRec align;
/* ignore stem alignments when requested through the hint flags */
if ( ( dimension == 0 && !glyph->do_horz_hints ) ||
( dimension == 1 && !glyph->do_vert_hints ) )
{
hint->cur_pos = pos;
hint->cur_len = len;
psh_hint_set_fitted( hint );
return;
}
fit_len = len;
hint->cur_len = fit_len;
/* check blue zones for horizontal stems */
align.align = PSH_BLUE_ALIGN_NONE;
align.align_bot = align.align_top = 0;
if ( dimension == 1 )
psh_blues_snap_stem( &globals->blues,
hint->org_pos + hint->org_len,
hint->org_pos,
&align );
switch ( align.align )
{
case PSH_BLUE_ALIGN_TOP:
/* the top of the stem is aligned against a blue zone */
hint->cur_pos = align.align_top - fit_len;
break;
case PSH_BLUE_ALIGN_BOT:
/* the bottom of the stem is aligned against a blue zone */
hint->cur_pos = align.align_bot;
break;
case PSH_BLUE_ALIGN_TOP | PSH_BLUE_ALIGN_BOT:
/* both edges of the stem are aligned against blue zones */
hint->cur_pos = align.align_bot;
hint->cur_len = align.align_top - align.align_bot;
break;
default:
{
PSH_Hint parent = hint->parent;
if ( parent )
{
FT_Pos par_org_center, par_cur_center;
FT_Pos cur_org_center, cur_delta;
/* ensure that parent is already fitted */
if ( !psh_hint_is_fitted( parent ) )
psh_hint_align_light( parent, globals, dimension, glyph );
par_org_center = parent->org_pos + ( parent->org_len / 2 );
par_cur_center = parent->cur_pos + ( parent->cur_len / 2 );
cur_org_center = hint->org_pos + ( hint->org_len / 2 );
cur_delta = FT_MulFix( cur_org_center - par_org_center, scale );
pos = par_cur_center + cur_delta - ( len >> 1 );
}
/* Stems less than one pixel wide are easy -- we want to
* make them as dark as possible, so they must fall within
* one pixel. If the stem is split between two pixels
* then snap the edge that is nearer to the pixel boundary
* to the pixel boundary.
*/
if ( len <= 64 )
{
if ( ( pos + len + 63 ) / 64 != pos / 64 + 1 )
pos += psh_hint_snap_stem_side_delta ( pos, len );
}
/* Position stems other to minimize the amount of mid-grays.
* There are, in general, two positions that do this,
* illustrated as A) and B) below.
*
* + + + +
*
* A) |--------------------------------|
* B) |--------------------------------|
* C) |--------------------------------|
*
* Position A) (split the excess stem equally) should be better
* for stems of width N + f where f < 0.5.
*
* Position B) (split the deficiency equally) should be better
* for stems of width N + f where f > 0.5.
*
* It turns out though that minimizing the total number of lit
* pixels is also important, so position C), with one edge
* aligned with a pixel boundary is actually preferable
* to A). There are also more possibile positions for C) than
* for A) or B), so it involves less distortion of the overall
* character shape.
*/
/* len > 64 */
else
{
FT_Fixed frac_len = len & 63;
FT_Fixed center = pos + ( len >> 1 );
FT_Fixed delta_a, delta_b;
if ( ( len / 64 ) & 1 )
{
delta_a = FT_PIX_FLOOR( center ) + 32 - center;
delta_b = FT_PIX_ROUND( center ) - center;
}
else
{
delta_a = FT_PIX_ROUND( center ) - center;
delta_b = FT_PIX_FLOOR( center ) + 32 - center;
}
/* We choose between B) and C) above based on the amount
* of fractinal stem width; for small amounts, choose
* C) always, for large amounts, B) always, and inbetween,
* pick whichever one involves less stem movement.
*/
if ( frac_len < 32 )
{
pos += psh_hint_snap_stem_side_delta ( pos, len );
}
else if ( frac_len < 48 )
{
FT_Fixed side_delta = psh_hint_snap_stem_side_delta ( pos,
len );
if ( FT_ABS( side_delta ) < FT_ABS( delta_b ) )
pos += side_delta;
else
pos += delta_b;
}
else
{
pos += delta_b;
}
}
hint->cur_pos = pos;
}
/* switch */
}
psh_hint_set_fitted( hint );
#ifdef DEBUG_HINTER
if ( ps_debug_hint_func )
ps_debug_hint_func( hint, dimension );
#endif
}
}
/* 0 */
#endif
static void
psh_hint_table_align_hints( PSH_Hint_Table table,
PSH_Globals globals,
FT_Int dimension,
PSH_Glyph glyph )
{
PSH_Hint hint;
FT_UInt count;
#ifdef DEBUG_HINTER
PSH_Dimension dim = &globals->dimension[dimension];
FT_Fixed scale = dim->scale_mult;
FT_Fixed delta = dim->scale_delta;
if ( ps_debug_no_vert_hints && dimension == 0 )
{
ps_simple_scale( table, scale, delta, dimension );
return;
}
if ( ps_debug_no_horz_hints && dimension == 1 )
{
ps_simple_scale( table, scale, delta, dimension );
return;
}
/* DEBUG_HINTER*/
#endif
hint = table->hints;
count = table->max_hints;
for ( ; count > 0; count--, hint++ )
psh_hint_align( hint, globals, dimension, glyph );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** POINTS INTERPOLATION ROUTINES *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
#define PSH_ZONE_MIN -3200000L
#define PSH_ZONE_MAX +3200000L
#define xxDEBUG_ZONES
#ifdef DEBUG_ZONES
static void
psh_print_zone( PSH_Zone zone )
{
printf( "zone [scale,delta,min,max] = [%.3f,%.3f,%d,%d]\n",
zone->scale / 65536.0,
zone->delta / 64.0,
zone->min,
zone->max );
}
#else
#define psh_print_zone( x ) do { } while ( 0 )
/* DEBUG_ZONES */
#endif
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** HINTER GLYPH MANAGEMENT *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
#if 1
#define psh_corner_is_flat ft_corner_is_flat
#define psh_corner_orientation ft_corner_orientation
#else
FT_LOCAL_DEF( FT_Int )
psh_corner_is_flat( FT_Pos x_in,
FT_Pos y_in,
FT_Pos x_out,
FT_Pos y_out )
{
FT_Pos ax = x_in;
FT_Pos ay = y_in;
FT_Pos d_in, d_out, d_corner;
if ( ax < 0 )
ax = -ax;
if ( ay < 0 )
ay = -ay;
d_in = ax + ay;
ax = x_out;
if ( ax < 0 )
ax = -ax;
ay = y_out;
if ( ay < 0 )
ay = -ay;
d_out = ax + ay;
ax = x_out + x_in;
if ( ax < 0 )
ax = -ax;
ay = y_out + y_in;
if ( ay < 0 )
ay = -ay;
d_corner = ax + ay;
return ( d_in + d_out - d_corner ) < ( d_corner >> 4 );
}
static FT_Int
psh_corner_orientation( FT_Pos in_x,
FT_Pos in_y,
FT_Pos out_x,
FT_Pos out_y )
{
FT_Int result;
/* deal with the trivial cases quickly */
if ( in_y == 0 )
{
if ( in_x >= 0 )
result = out_y;
else
result = -out_y;
}
else if ( in_x == 0 )
{
if ( in_y >= 0 )
result = -out_x;
else
result = out_x;
}
else if ( out_y == 0 )
{
if ( out_x >= 0 )
result = in_y;
else
result = -in_y;
}
else if ( out_x == 0 )
{
if ( out_y >= 0 )
result = -in_x;
else
result = in_x;
}
/* general case */
else
{
long long delta = (long long)in_x * out_y - (long long)in_y * out_x;
if ( delta == 0 )
result = 0;
else
result = 1 - 2 * ( delta < 0 );
}
return result;
}
/* !1 */
#endif
#ifdef COMPUTE_INFLEXS
/* compute all inflex points in a given glyph */
static void
psh_glyph_compute_inflections( PSH_Glyph glyph )
{
FT_UInt n;
for ( n = 0; n < glyph->num_contours; n++ )
{
PSH_Point first, start, end, before, after;
FT_Pos in_x, in_y, out_x, out_y;
FT_Int orient_prev, orient_cur;
FT_Int finished = 0;
/* we need at least 4 points to create an inflection point */
if ( glyph->contours[n].count < 4 )
continue;
/* compute first segment in contour */
first = glyph->contours[n].start;
start = end = first;
do
{
end = end->next;
if ( end == first )
goto Skip;
in_x = end->org_u - start->org_u;
in_y = end->org_v - start->org_v;
} while ( in_x == 0 && in_y == 0 );
/* extend the segment start whenever possible */
before = start;
do
{
do
{
start = before;
before = before->prev;
if ( before == first )
goto Skip;
out_x = start->org_u - before->org_u;
out_y = start->org_v - before->org_v;
} while ( out_x == 0 && out_y == 0 );
orient_prev = psh_corner_orientation( in_x, in_y, out_x, out_y );
} while ( orient_prev == 0 );
first = start;
in_x = out_x;
in_y = out_y;
/* now, process all segments in the contour */
do
{
/* first, extend current segment's end whenever possible */
after = end;
do
{
do
{
end = after;
after = after->next;
if ( after == first )
finished = 1;
out_x = after->org_u - end->org_u;
out_y = after->org_v - end->org_v;
} while ( out_x == 0 && out_y == 0 );
orient_cur = psh_corner_orientation( in_x, in_y, out_x, out_y );
} while ( orient_cur == 0 );
if ( ( orient_cur ^ orient_prev ) < 0 )
{
do
{
psh_point_set_inflex( start );
start = start->next;
}
while ( start != end );
psh_point_set_inflex( start );
}
start = end;
end = after;
orient_prev = orient_cur;
in_x = out_x;
in_y = out_y;
} while ( !finished );
Skip:
;
}
}
/* COMPUTE_INFLEXS */
#endif
static void
psh_glyph_done( PSH_Glyph glyph )
{
FT_Memory memory = glyph->memory;
psh_hint_table_done( &glyph->hint_tables[1], memory );
psh_hint_table_done( &glyph->hint_tables[0], memory );
FT_FREE( glyph->points );
FT_FREE( glyph->contours );
glyph->num_points = 0;
glyph->num_contours = 0;
glyph->memory = 0;
}
static int
psh_compute_dir( FT_Pos dx,
FT_Pos dy )
{
FT_Pos ax, ay;
int result = PSH_DIR_NONE;
ax = ( dx >= 0 ) ? dx : -dx;
ay = ( dy >= 0 ) ? dy : -dy;
if ( ay * 12 < ax )
{
/* |dy| <<< |dx| means a near-horizontal segment */
result = ( dx >= 0 ) ? PSH_DIR_RIGHT : PSH_DIR_LEFT;
}
else if ( ax * 12 < ay )
{
/* |dx| <<< |dy| means a near-vertical segment */
result = ( dy >= 0 ) ? PSH_DIR_UP : PSH_DIR_DOWN;
}
return result;
}
/* load outline point coordinates into hinter glyph */
static void
psh_glyph_load_points( PSH_Glyph glyph,
FT_Int dimension )
{
FT_Vector* vec = glyph->outline->points;
PSH_Point point = glyph->points;
FT_UInt count = glyph->num_points;
for ( ; count > 0; count--, point++, vec++ )
{
point->flags2 = 0;
point->hint = NULL;
if ( dimension == 0 )
{
point->org_u = vec->x;
point->org_v = vec->y;
}
else
{
point->org_u = vec->y;
point->org_v = vec->x;
}
#ifdef DEBUG_HINTER
point->org_x = vec->x;
point->org_y = vec->y;
#endif
}
}
/* save hinted point coordinates back to outline */
static void
psh_glyph_save_points( PSH_Glyph glyph,
FT_Int dimension )
{
FT_UInt n;
PSH_Point point = glyph->points;
FT_Vector* vec = glyph->outline->points;
char* tags = glyph->outline->tags;
for ( n = 0; n < glyph->num_points; n++ )
{
if ( dimension == 0 )
vec[n].x = point->cur_u;
else
vec[n].y = point->cur_u;
if ( psh_point_is_strong( point ) )
tags[n] |= (char)( ( dimension == 0 ) ? 32 : 64 );
#ifdef DEBUG_HINTER
if ( dimension == 0 )
{
point->cur_x = point->cur_u;
point->flags_x = point->flags2 | point->flags;
}
else
{
point->cur_y = point->cur_u;
point->flags_y = point->flags2 | point->flags;
}
#endif
point++;
}
}
static FT_Error
psh_glyph_init( PSH_Glyph glyph,
FT_Outline* outline,
PS_Hints ps_hints,
PSH_Globals globals )
{
FT_Error error;
FT_Memory memory;
/* clear all fields */
FT_MEM_ZERO( glyph, sizeof ( *glyph ) );
memory = glyph->memory = globals->memory;
/* allocate and setup points + contours arrays */
if ( FT_NEW_ARRAY( glyph->points, outline->n_points ) ||
FT_NEW_ARRAY( glyph->contours, outline->n_contours ) )
goto Exit;
glyph->num_points = outline->n_points;
glyph->num_contours = outline->n_contours;
{
FT_UInt first = 0, next, n;
PSH_Point points = glyph->points;
PSH_Contour contour = glyph->contours;
for ( n = 0; n < glyph->num_contours; n++ )
{
FT_Int count;
PSH_Point point;
next = outline->contours[n] + 1;
count = next - first;
contour->start = points + first;
contour->count = (FT_UInt)count;
if ( count > 0 )
{
point = points + first;
point->prev = points + next - 1;
point->contour = contour;
for ( ; count > 1; count-- )
{
point[0].next = point + 1;
point[1].prev = point;
point++;
point->contour = contour;
}
point->next = points + first;
}
contour++;
first = next;
}
}
{
PSH_Point points = glyph->points;
PSH_Point point = points;
FT_Vector* vec = outline->points;
FT_UInt n;
for ( n = 0; n < glyph->num_points; n++, point++ )
{
FT_Int n_prev = (FT_Int)( point->prev - points );
FT_Int n_next = (FT_Int)( point->next - points );
FT_Pos dxi, dyi, dxo, dyo;
if ( !( outline->tags[n] & FT_CURVE_TAG_ON ) )
point->flags = PSH_POINT_OFF;
dxi = vec[n].x - vec[n_prev].x;
dyi = vec[n].y - vec[n_prev].y;
point->dir_in = (FT_Char)psh_compute_dir( dxi, dyi );
dxo = vec[n_next].x - vec[n].x;
dyo = vec[n_next].y - vec[n].y;
point->dir_out = (FT_Char)psh_compute_dir( dxo, dyo );
/* detect smooth points */
if ( point->flags & PSH_POINT_OFF )
point->flags |= PSH_POINT_SMOOTH;
else if ( point->dir_in == point->dir_out )
{
if ( point->dir_out != PSH_DIR_NONE ||
psh_corner_is_flat( dxi, dyi, dxo, dyo ) )
point->flags |= PSH_POINT_SMOOTH;
}
}
}
glyph->outline = outline;
glyph->globals = globals;
#ifdef COMPUTE_INFLEXS
psh_glyph_load_points( glyph, 0 );
psh_glyph_compute_inflections( glyph );
/* COMPUTE_INFLEXS */
#endif
/* now deal with hints tables */
error = psh_hint_table_init( &glyph->hint_tables [0],
&ps_hints->dimension[0].hints,
&ps_hints->dimension[0].masks,
&ps_hints->dimension[0].counters,
memory );
if ( error )
goto Exit;
error = psh_hint_table_init( &glyph->hint_tables [1],
&ps_hints->dimension[1].hints,
&ps_hints->dimension[1].masks,
&ps_hints->dimension[1].counters,
memory );
if ( error )
goto Exit;
Exit:
return error;
}
/* compute all extrema in a glyph for a given dimension */
static void
psh_glyph_compute_extrema( PSH_Glyph glyph )
{
FT_UInt n;
/* first of all, compute all local extrema */
for ( n = 0; n < glyph->num_contours; n++ )
{
PSH_Point first = glyph->contours[n].start;
PSH_Point point, before, after;
if ( glyph->contours[n].count == 0 )
continue;
point = first;
before = point;
after = point;
do
{
before = before->prev;
if ( before == first )
goto Skip;
} while ( before->org_u == point->org_u );
first = point = before->next;
for (;;)
{
after = point;
do
{
after = after->next;
if ( after == first )
goto Next;
} while ( after->org_u == point->org_u );
if ( before->org_u < point->org_u )
{
if ( after->org_u < point->org_u )
{
/* local maximum */
goto Extremum;
}
}
/* before->org_u > point->org_u */
else
{
if ( after->org_u > point->org_u )
{
/* local minimum */
Extremum:
do
{
psh_point_set_extremum( point );
point = point->next;
} while ( point != after );
}
}
before = after->prev;
point = after;
/* for */
}
Next:
;
}
/* for each extremum, determine its direction along the */
/* orthogonal axis */
for ( n = 0; n < glyph->num_points; n++ )
{
PSH_Point point, before, after;
point = &glyph->points[n];
before = point;
after = point;
if ( psh_point_is_extremum( point ) )
{
do
{
before = before->prev;
if ( before == point )
goto Skip;
} while ( before->org_v == point->org_v );
do
{
after = after->next;
if ( after == point )
goto Skip;
} while ( after->org_v == point->org_v );
}
if ( before->org_v < point->org_v &&
after->org_v > point->org_v )
{
psh_point_set_positive( point );
}
else if ( before->org_v > point->org_v &&
after->org_v < point->org_v )
{
psh_point_set_negative( point );
}
Skip:
;
}
}
/* major_dir is the direction for points on the bottom/left of the stem; */
/* Points on the top/right of the stem will have a direction of */
/* -major_dir. */
static void
psh_hint_table_find_strong_points( PSH_Hint_Table table,
PSH_Point point,
FT_UInt count,
FT_Int threshold,
FT_Int major_dir )
{
PSH_Hint* sort = table->sort;
FT_UInt num_hints = table->num_hints;
for ( ; count > 0; count--, point++ )
{
FT_Int point_dir = 0;
FT_Pos org_u = point->org_u;
if ( psh_point_is_strong( point ) )
continue;
if ( PSH_DIR_COMPARE( point->dir_in, major_dir ) )
point_dir = point->dir_in;
else if ( PSH_DIR_COMPARE( point->dir_out, major_dir ) )
point_dir = point->dir_out;
if ( point_dir )
{
if ( point_dir == major_dir )
{
FT_UInt nn;
for ( nn = 0; nn < num_hints; nn++ )
{
PSH_Hint hint = sort[nn];
FT_Pos d = org_u - hint->org_pos;
if ( d < threshold && -d < threshold )
{
psh_point_set_strong( point );
point->flags2 |= PSH_POINT_EDGE_MIN;
point->hint = hint;
break;
}
}
}
else if ( point_dir == -major_dir )
{
FT_UInt nn;
for ( nn = 0; nn < num_hints; nn++ )
{
PSH_Hint hint = sort[nn];
FT_Pos d = org_u - hint->org_pos - hint->org_len;
if ( d < threshold && -d < threshold )
{
psh_point_set_strong( point );
point->flags2 |= PSH_POINT_EDGE_MAX;
point->hint = hint;
break;
}
}
}
}
#if 1
else if ( psh_point_is_extremum( point ) )
{
/* treat extrema as special cases for stem edge alignment */
FT_UInt nn, min_flag, max_flag;
if ( major_dir == PSH_DIR_HORIZONTAL )
{
min_flag = PSH_POINT_POSITIVE;
max_flag = PSH_POINT_NEGATIVE;
}
else
{
min_flag = PSH_POINT_NEGATIVE;
max_flag = PSH_POINT_POSITIVE;
}
if ( point->flags2 & min_flag )
{
for ( nn = 0; nn < num_hints; nn++ )
{
PSH_Hint hint = sort[nn];
FT_Pos d = org_u - hint->org_pos;
if ( d < threshold && -d < threshold )
{
point->flags2 |= PSH_POINT_EDGE_MIN;
point->hint = hint;
psh_point_set_strong( point );
break;
}
}
}
else if ( point->flags2 & max_flag )
{
for ( nn = 0; nn < num_hints; nn++ )
{
PSH_Hint hint = sort[nn];
FT_Pos d = org_u - hint->org_pos - hint->org_len;
if ( d < threshold && -d < threshold )
{
point->flags2 |= PSH_POINT_EDGE_MAX;
point->hint = hint;
psh_point_set_strong( point );
break;
}
}
}
if ( point->hint == NULL )
{
for ( nn = 0; nn < num_hints; nn++ )
{
PSH_Hint hint = sort[nn];
if ( org_u >= hint->org_pos &&
org_u <= hint->org_pos + hint->org_len )
{
point->hint = hint;
break;
}
}
}
}
/* 1 */
#endif
}
}
/* the accepted shift for strong points in fractional pixels */
#define PSH_STRONG_THRESHOLD 32
/* the maximum shift value in font units */
#define PSH_STRONG_THRESHOLD_MAXIMUM 30
/* find strong points in a glyph */
static void
psh_glyph_find_strong_points( PSH_Glyph glyph,
FT_Int dimension )
{
/* a point is `strong' if it is located on a stem edge and */
/* has an `in' or `out' tangent parallel to the hint's direction */
PSH_Hint_Table table = &glyph->hint_tables[dimension];
PS_Mask mask = table->hint_masks->masks;
FT_UInt num_masks = table->hint_masks->num_masks;
FT_UInt first = 0;
FT_Int major_dir = dimension == 0 ? PSH_DIR_VERTICAL
: PSH_DIR_HORIZONTAL;
PSH_Dimension dim = &glyph->globals->dimension[dimension];
FT_Fixed scale = dim->scale_mult;
FT_Int threshold;
threshold = (FT_Int)FT_DivFix( PSH_STRONG_THRESHOLD, scale );
if ( threshold > PSH_STRONG_THRESHOLD_MAXIMUM )
threshold = PSH_STRONG_THRESHOLD_MAXIMUM;
/* process secondary hints to `selected' points */
if ( num_masks > 1 && glyph->num_points > 0 )
{
/* the `endchar' op can reduce the number of points */
first = mask->end_point > glyph->num_points
? glyph->num_points
: mask->end_point;
mask++;
for ( ; num_masks > 1; num_masks--, mask++ )
{
FT_UInt next;
FT_Int count;
next = mask->end_point > glyph->num_points
? glyph->num_points
: mask->end_point;
count = next - first;
if ( count > 0 )
{
PSH_Point point = glyph->points + first;
psh_hint_table_activate_mask( table, mask );
psh_hint_table_find_strong_points( table, point, count,
threshold, major_dir );
}
first = next;
}
}
/* process primary hints for all points */
if ( num_masks == 1 )
{
FT_UInt count = glyph->num_points;
PSH_Point point = glyph->points;
psh_hint_table_activate_mask( table, table->hint_masks->masks );
psh_hint_table_find_strong_points( table, point, count,
threshold, major_dir );
}
/* now, certain points may have been attached to a hint and */
/* not marked as strong; update their flags then */
{
FT_UInt count = glyph->num_points;
PSH_Point point = glyph->points;
for ( ; count > 0; count--, point++ )
if ( point->hint && !psh_point_is_strong( point ) )
psh_point_set_strong( point );
}
}
/* find points in a glyph which are in a blue zone and have `in' or */
/* `out' tangents parallel to the horizontal axis */
static void
psh_glyph_find_blue_points( PSH_Blues blues,
PSH_Glyph glyph )
{
PSH_Blue_Table table;
PSH_Blue_Zone zone;
FT_UInt glyph_count = glyph->num_points;
FT_UInt blue_count;
PSH_Point point = glyph->points;
for ( ; glyph_count > 0; glyph_count--, point++ )
{
FT_Pos y;
/* check tangents */
if ( !PSH_DIR_COMPARE( point->dir_in, PSH_DIR_HORIZONTAL ) &&
!PSH_DIR_COMPARE( point->dir_out, PSH_DIR_HORIZONTAL ) )
continue;
/* skip strong points */
if ( psh_point_is_strong( point ) )
continue;
y = point->org_u;
/* look up top zones */
table = &blues->normal_top;
blue_count = table->count;
zone = table->zones;
for ( ; blue_count > 0; blue_count--, zone++ )
{
FT_Pos delta = y - zone->org_bottom;
if ( delta < -blues->blue_fuzz )
break;
if ( y <= zone->org_top + blues->blue_fuzz )
if ( blues->no_overshoots || delta <= blues->blue_threshold )
{
point->cur_u = zone->cur_bottom;
psh_point_set_strong( point );
psh_point_set_fitted( point );
}
}
/* look up bottom zones */
table = &blues->normal_bottom;
blue_count = table->count;
zone = table->zones + blue_count - 1;
for ( ; blue_count > 0; blue_count--, zone-- )
{
FT_Pos delta = zone->org_top - y;
if ( delta < -blues->blue_fuzz )
break;
if ( y >= zone->org_bottom - blues->blue_fuzz )
if ( blues->no_overshoots || delta < blues->blue_threshold )
{
point->cur_u = zone->cur_top;
psh_point_set_strong( point );
psh_point_set_fitted( point );
}
}
}
}
/* interpolate strong points with the help of hinted coordinates */
static void
psh_glyph_interpolate_strong_points( PSH_Glyph glyph,
FT_Int dimension )
{
PSH_Dimension dim = &glyph->globals->dimension[dimension];
FT_Fixed scale = dim->scale_mult;
FT_UInt count = glyph->num_points;
PSH_Point point = glyph->points;
for ( ; count > 0; count--, point++ )
{
PSH_Hint hint = point->hint;
if ( hint )
{
FT_Pos delta;
if ( psh_point_is_edge_min( point ) )
point->cur_u = hint->cur_pos;
else if ( psh_point_is_edge_max( point ) )
point->cur_u = hint->cur_pos + hint->cur_len;
else
{
delta = point->org_u - hint->org_pos;
if ( delta <= 0 )
point->cur_u = hint->cur_pos + FT_MulFix( delta, scale );
else if ( delta >= hint->org_len )
point->cur_u = hint->cur_pos + hint->cur_len +
FT_MulFix( delta - hint->org_len, scale );
/* hint->org_len > 0 */
else
point->cur_u = hint->cur_pos +
FT_MulDiv( delta, hint->cur_len,
hint->org_len );
}
psh_point_set_fitted( point );
}
}
}
#define PSH_MAX_STRONG_INTERNAL 16
static void
psh_glyph_interpolate_normal_points( PSH_Glyph glyph,
FT_Int dimension )
{
#if 1
/* first technique: a point is strong if it is a local extremum */
PSH_Dimension dim = &glyph->globals->dimension[dimension];
FT_Fixed scale = dim->scale_mult;
FT_Memory memory = glyph->memory;
PSH_Point* strongs = NULL;
PSH_Point strongs_0[PSH_MAX_STRONG_INTERNAL];
FT_UInt num_strongs = 0;
PSH_Point points = glyph->points;
PSH_Point points_end = points + glyph->num_points;
PSH_Point point;
/* first count the number of strong points */
for ( point = points; point < points_end; point++ )
{
if ( psh_point_is_strong( point ) )
num_strongs++;
}
/* nothing to do here */
if ( num_strongs == 0 )
return;
/* allocate an array to store a list of points, */
/* stored in increasing org_u order */
if ( num_strongs <= PSH_MAX_STRONG_INTERNAL )
strongs = strongs_0;
else
{
FT_Error error;
if ( FT_NEW_ARRAY( strongs, num_strongs ) )
return;
}
num_strongs = 0;
for ( point = points; point < points_end; point++ )
{
PSH_Point* insert;
if ( !psh_point_is_strong( point ) )
continue;
for ( insert = strongs + num_strongs; insert > strongs; insert-- )
{
if ( insert[-1]->org_u <= point->org_u )
break;
insert[0] = insert[-1];
}
insert[0] = point;
num_strongs++;
}
/* now try to interpolate all normal points */
for ( point = points; point < points_end; point++ )
{
if ( psh_point_is_strong( point ) )
continue;
/* sometimes, some local extrema are smooth points */
if ( psh_point_is_smooth( point ) )
{
if ( point->dir_in == PSH_DIR_NONE ||
point->dir_in != point->dir_out )
continue;
if ( !psh_point_is_extremum( point ) &&
!psh_point_is_inflex( point ) )
continue;
point->flags &= ~PSH_POINT_SMOOTH;
}
/* find best enclosing point coordinates then interpolate */
{
PSH_Point before, after;
FT_UInt nn;
for ( nn = 0; nn < num_strongs; nn++ )
if ( strongs[nn]->org_u > point->org_u )
break;
/* point before the first strong point */
if ( nn == 0 )
{
after = strongs[0];
point->cur_u = after->cur_u +
FT_MulFix( point->org_u - after->org_u,
scale );
}
else
{
before = strongs[nn - 1];
for ( nn = num_strongs; nn > 0; nn-- )
if ( strongs[nn - 1]->org_u < point->org_u )
break;
/* point is after last strong point */
if ( nn == num_strongs )
{
before = strongs[nn - 1];
point->cur_u = before->cur_u +
FT_MulFix( point->org_u - before->org_u,
scale );
}
else
{
FT_Pos u;
after = strongs[nn];
/* now interpolate point between before and after */
u = point->org_u;
if ( u == before->org_u )
point->cur_u = before->cur_u;
else if ( u == after->org_u )
point->cur_u = after->cur_u;
else
point->cur_u = before->cur_u +
FT_MulDiv( u - before->org_u,
after->cur_u - before->cur_u,
after->org_u - before->org_u );
}
}
psh_point_set_fitted( point );
}
}
if ( strongs != strongs_0 )
FT_FREE( strongs );
/* 1 */
#endif
}
/* interpolate other points */
static void
psh_glyph_interpolate_other_points( PSH_Glyph glyph,
FT_Int dimension )
{
PSH_Dimension dim = &glyph->globals->dimension[dimension];
FT_Fixed scale = dim->scale_mult;
FT_Fixed delta = dim->scale_delta;
PSH_Contour contour = glyph->contours;
FT_UInt num_contours = glyph->num_contours;
for ( ; num_contours > 0; num_contours--, contour++ )
{
PSH_Point start = contour->start;
PSH_Point first, next, point;
FT_UInt fit_count;
/* count the number of strong points in this contour */
next = start + contour->count;
fit_count = 0;
first = 0;
for ( point = start; point < next; point++ )
if ( psh_point_is_fitted( point ) )
{
if ( !first )
first = point;
fit_count++;
}
/* if there are less than 2 fitted points in the contour, we */
/* simply scale and eventually translate the contour points */
if ( fit_count < 2 )
{
if ( fit_count == 1 )
delta = first->cur_u - FT_MulFix( first->org_u, scale );
for ( point = start; point < next; point++ )
if ( point != first )
point->cur_u = FT_MulFix( point->org_u, scale ) + delta;
goto Next_Contour;
}
/* there are more than 2 strong points in this contour; we */
/* need to interpolate weak points between them */
start = first;
do
{
point = first;
/* skip consecutive fitted points */
for (;;)
{
next = first->next;
if ( next == start )
goto Next_Contour;
if ( !psh_point_is_fitted( next ) )
break;
first = next;
}
/* find next fitted point after unfitted one */
for (;;)
{
next = next->next;
if ( psh_point_is_fitted( next ) )
break;
}
/* now interpolate between them */
{
FT_Pos org_a, org_ab, cur_a, cur_ab;
FT_Pos org_c, org_ac, cur_c;
FT_Fixed scale_ab;
if ( first->org_u <= next->org_u )
{
org_a = first->org_u;
cur_a = first->cur_u;
org_ab = next->org_u - org_a;
cur_ab = next->cur_u - cur_a;
}
else
{
org_a = next->org_u;
cur_a = next->cur_u;
org_ab = first->org_u - org_a;
cur_ab = first->cur_u - cur_a;
}
scale_ab = 0x10000L;
if ( org_ab > 0 )
scale_ab = FT_DivFix( cur_ab, org_ab );
point = first->next;
do
{
org_c = point->org_u;
org_ac = org_c - org_a;
if ( org_ac <= 0 )
{
/* on the left of the interpolation zone */
cur_c = cur_a + FT_MulFix( org_ac, scale );
}
else if ( org_ac >= org_ab )
{
/* on the right on the interpolation zone */
cur_c = cur_a + cur_ab + FT_MulFix( org_ac - org_ab, scale );
}
else
{
/* within the interpolation zone */
cur_c = cur_a + FT_MulFix( org_ac, scale_ab );
}
point->cur_u = cur_c;
point = point->next;
} while ( point != next );
}
/* keep going until all points in the contours have been processed */
first = next;
} while ( first != start );
Next_Contour:
;
}
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** HIGH-LEVEL INTERFACE *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_Error
ps_hints_apply( PS_Hints ps_hints,
FT_Outline* outline,
PSH_Globals globals,
FT_Render_Mode hint_mode )
{
PSH_GlyphRec glyphrec;
PSH_Glyph glyph = &glyphrec;
FT_Error error;
#ifdef DEBUG_HINTER
FT_Memory memory;
#endif
FT_Int dimension;
/* something to do? */
if ( outline->n_points == 0 || outline->n_contours == 0 )
return PSH_Err_Ok;
#ifdef DEBUG_HINTER
memory = globals->memory;
if ( ps_debug_glyph )
{
psh_glyph_done( ps_debug_glyph );
FT_FREE( ps_debug_glyph );
}
if ( FT_NEW( glyph ) )
return error;
ps_debug_glyph = glyph;
/* DEBUG_HINTER */
#endif
error = psh_glyph_init( glyph, outline, ps_hints, globals );
if ( error )
goto Exit;
/* try to optimize the y_scale so that the top of non-capital letters
* is aligned on a pixel boundary whenever possible
*/
{
PSH_Dimension dim_x = &glyph->globals->dimension[0];
PSH_Dimension dim_y = &glyph->globals->dimension[1];
FT_Fixed x_scale = dim_x->scale_mult;
FT_Fixed y_scale = dim_y->scale_mult;
FT_Fixed old_x_scale = x_scale;
FT_Fixed old_y_scale = y_scale;
FT_Fixed scaled;
FT_Fixed fitted;
FT_Bool rescale = FALSE;
scaled = FT_MulFix( globals->blues.normal_top.zones->org_ref, y_scale );
fitted = FT_PIX_ROUND( scaled );
if ( fitted != 0 && scaled != fitted )
{
rescale = TRUE;
y_scale = FT_MulDiv( y_scale, fitted, scaled );
if ( fitted < scaled )
x_scale -= x_scale / 50;
psh_globals_set_scale( glyph->globals, x_scale, y_scale, 0, 0 );
}
glyph->do_horz_hints = 1;
glyph->do_vert_hints = 1;
glyph->do_horz_snapping = FT_BOOL( hint_mode == FT_RENDER_MODE_MONO ||
hint_mode == FT_RENDER_MODE_LCD );
glyph->do_vert_snapping = FT_BOOL( hint_mode == FT_RENDER_MODE_MONO ||
hint_mode == FT_RENDER_MODE_LCD_V );
glyph->do_stem_adjust = FT_BOOL( hint_mode != FT_RENDER_MODE_LIGHT );
for ( dimension = 0; dimension < 2; dimension++ )
{
/* load outline coordinates into glyph */
psh_glyph_load_points( glyph, dimension );
/* compute local extrema */
psh_glyph_compute_extrema( glyph );
/* compute aligned stem/hints positions */
psh_hint_table_align_hints( &glyph->hint_tables[dimension],
glyph->globals,
dimension,
glyph );
/* find strong points, align them, then interpolate others */
psh_glyph_find_strong_points( glyph, dimension );
if ( dimension == 1 )
psh_glyph_find_blue_points( &globals->blues, glyph );
psh_glyph_interpolate_strong_points( glyph, dimension );
psh_glyph_interpolate_normal_points( glyph, dimension );
psh_glyph_interpolate_other_points( glyph, dimension );
/* save hinted coordinates back to outline */
psh_glyph_save_points( glyph, dimension );
if ( rescale )
psh_globals_set_scale( glyph->globals,
old_x_scale, old_y_scale, 0, 0 );
}
}
Exit:
#ifndef DEBUG_HINTER
psh_glyph_done( glyph );
#endif
return error;
}
/* END */
/***************************************************************************/
/* */
/* pshmod.c */
/* */
/* FreeType PostScript hinter module implementation (body). */
/* */
/* Copyright 2001, 2002, 2007, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* the Postscript Hinter module structure */
typedef struct PS_Hinter_Module_Rec_
{
FT_ModuleRec root;
PS_HintsRec ps_hints;
PSH_Globals_FuncsRec globals_funcs;
T1_Hints_FuncsRec t1_funcs;
T2_Hints_FuncsRec t2_funcs;
} PS_Hinter_ModuleRec, *PS_Hinter_Module;
/* finalize module */
FT_CALLBACK_DEF( void )
ps_hinter_done( PS_Hinter_Module module )
{
module->t1_funcs.hints = NULL;
module->t2_funcs.hints = NULL;
ps_hints_done( &module->ps_hints );
}
/* initialize module, create hints recorder and the interface */
FT_CALLBACK_DEF( FT_Error )
ps_hinter_init( PS_Hinter_Module module )
{
FT_Memory memory = module->root.memory;
void* ph = &module->ps_hints;
ps_hints_init( &module->ps_hints, memory );
psh_globals_funcs_init( &module->globals_funcs );
t1_hints_funcs_init( &module->t1_funcs );
module->t1_funcs.hints = (T1_Hints)ph;
t2_hints_funcs_init( &module->t2_funcs );
module->t2_funcs.hints = (T2_Hints)ph;
return 0;
}
/* returns global hints interface */
FT_CALLBACK_DEF( PSH_Globals_Funcs )
pshinter_get_globals_funcs( FT_Module module )
{
return &((PS_Hinter_Module)module)->globals_funcs;
}
/* return Type 1 hints interface */
FT_CALLBACK_DEF( T1_Hints_Funcs )
pshinter_get_t1_funcs( FT_Module module )
{
return &((PS_Hinter_Module)module)->t1_funcs;
}
/* return Type 2 hints interface */
FT_CALLBACK_DEF( T2_Hints_Funcs )
pshinter_get_t2_funcs( FT_Module module )
{
return &((PS_Hinter_Module)module)->t2_funcs;
}
FT_DEFINE_PSHINTER_INTERFACE(
pshinter_interface,
pshinter_get_globals_funcs,
pshinter_get_t1_funcs,
pshinter_get_t2_funcs )
FT_DEFINE_MODULE(
pshinter_module_class,
0,
sizeof ( PS_Hinter_ModuleRec ),
"pshinter",
0x10000L,
0x20000L,
/* module-specific interface */
&PSHINTER_INTERFACE_GET,
(FT_Module_Constructor)ps_hinter_init,
(FT_Module_Destructor) ps_hinter_done,
/* no additional interface for now */
(FT_Module_Requester) NULL )
/* END */
/* END */
/***************************************************************************/
/* */
/* psnames.c */
/* */
/* FreeType PSNames module component (body only). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* pspic.c */
/* */
/* The FreeType position independent code services for psnames module. */
/* */
/* Copyright 2009, 2010, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* pspic.h */
/* */
/* The FreeType position independent code services for psnames module. */
/* */
/* Copyright 2009, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSPIC_H__
FT_BEGIN_HEADER
#define PSCMAPS_SERVICES_GET pscmaps_services
#define PSCMAPS_INTERFACE_GET pscmaps_interface
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* psnamerr.h */
/* */
/* PS names module error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the PS names module error enumeration */
/* constants. */
/* */
/*************************************************************************/
#define __PSNAMERR_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX PSnames_Err_
#define FT_ERR_BASE FT_Mod_Err_PSnames
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/* END */
/***************************************************************************/
/* */
/* psmodule.c */
/* */
/* PSNames module implementation (body). */
/* */
/* Copyright 1996-2003, 2005-2008, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* psmodule.h */
/* */
/* High-level PSNames module interface (specification). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSMODULE_H__
FT_BEGIN_HEADER
FT_DECLARE_MODULE( psnames_module_class )
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* pstables.h */
/* */
/* PostScript glyph names. */
/* */
/* Copyright 2005, 2008, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* This file has been generated automatically -- do not edit! */
static const char ft_standard_glyph_names[3696] =
{
'.','n','u','l','l', 0,
'n','o','n','m','a','r','k','i','n','g','r','e','t','u','r','n', 0,
'n','o','t','e','q','u','a','l', 0,
'i','n','f','i','n','i','t','y', 0,
'l','e','s','s','e','q','u','a','l', 0,
'g','r','e','a','t','e','r','e','q','u','a','l', 0,
'p','a','r','t','i','a','l','d','i','f','f', 0,
's','u','m','m','a','t','i','o','n', 0,
'p','r','o','d','u','c','t', 0,
'p','i', 0,
'i','n','t','e','g','r','a','l', 0,
'O','m','e','g','a', 0,
'r','a','d','i','c','a','l', 0,
'a','p','p','r','o','x','e','q','u','a','l', 0,
'D','e','l','t','a', 0,
'n','o','n','b','r','e','a','k','i','n','g','s','p','a','c','e', 0,
'l','o','z','e','n','g','e', 0,
'a','p','p','l','e', 0,
'f','r','a','n','c', 0,
'G','b','r','e','v','e', 0,
'g','b','r','e','v','e', 0,
'I','d','o','t','a','c','c','e','n','t', 0,
'S','c','e','d','i','l','l','a', 0,
's','c','e','d','i','l','l','a', 0,
'C','a','c','u','t','e', 0,
'c','a','c','u','t','e', 0,
'C','c','a','r','o','n', 0,
'c','c','a','r','o','n', 0,
'd','c','r','o','a','t', 0,
'.','n','o','t','d','e','f', 0,
's','p','a','c','e', 0,
'e','x','c','l','a','m', 0,
'q','u','o','t','e','d','b','l', 0,
'n','u','m','b','e','r','s','i','g','n', 0,
'd','o','l','l','a','r', 0,
'p','e','r','c','e','n','t', 0,
'a','m','p','e','r','s','a','n','d', 0,
'q','u','o','t','e','r','i','g','h','t', 0,
'p','a','r','e','n','l','e','f','t', 0,
'p','a','r','e','n','r','i','g','h','t', 0,
'a','s','t','e','r','i','s','k', 0,
'p','l','u','s', 0,
'c','o','m','m','a', 0,
'h','y','p','h','e','n', 0,
'p','e','r','i','o','d', 0,
's','l','a','s','h', 0,
'z','e','r','o', 0,
'o','n','e', 0,
't','w','o', 0,
't','h','r','e','e', 0,
'f','o','u','r', 0,
'f','i','v','e', 0,
's','i','x', 0,
's','e','v','e','n', 0,
'e','i','g','h','t', 0,
'n','i','n','e', 0,
'c','o','l','o','n', 0,
's','e','m','i','c','o','l','o','n', 0,
'l','e','s','s', 0,
'e','q','u','a','l', 0,
'g','r','e','a','t','e','r', 0,
'q','u','e','s','t','i','o','n', 0,
'a','t', 0,
'A', 0,
'B', 0,
'C', 0,
'D', 0,
'E', 0,
'F', 0,
'G', 0,
'H', 0,
'I', 0,
'J', 0,
'K', 0,
'L', 0,
'M', 0,
'N', 0,
'O', 0,
'P', 0,
'Q', 0,
'R', 0,
'S', 0,
'T', 0,
'U', 0,
'V', 0,
'W', 0,
'X', 0,
'Y', 0,
'Z', 0,
'b','r','a','c','k','e','t','l','e','f','t', 0,
'b','a','c','k','s','l','a','s','h', 0,
'b','r','a','c','k','e','t','r','i','g','h','t', 0,
'a','s','c','i','i','c','i','r','c','u','m', 0,
'u','n','d','e','r','s','c','o','r','e', 0,
'q','u','o','t','e','l','e','f','t', 0,
'a', 0,
'b', 0,
'c', 0,
'd', 0,
'e', 0,
'f', 0,
'g', 0,
'h', 0,
'i', 0,
'j', 0,
'k', 0,
'l', 0,
'm', 0,
'n', 0,
'o', 0,
'p', 0,
'q', 0,
'r', 0,
's', 0,
't', 0,
'u', 0,
'v', 0,
'w', 0,
'x', 0,
'y', 0,
'z', 0,
'b','r','a','c','e','l','e','f','t', 0,
'b','a','r', 0,
'b','r','a','c','e','r','i','g','h','t', 0,
'a','s','c','i','i','t','i','l','d','e', 0,
'e','x','c','l','a','m','d','o','w','n', 0,
'c','e','n','t', 0,
's','t','e','r','l','i','n','g', 0,
'f','r','a','c','t','i','o','n', 0,
'y','e','n', 0,
'f','l','o','r','i','n', 0,
's','e','c','t','i','o','n', 0,
'c','u','r','r','e','n','c','y', 0,
'q','u','o','t','e','s','i','n','g','l','e', 0,
'q','u','o','t','e','d','b','l','l','e','f','t', 0,
'g','u','i','l','l','e','m','o','t','l','e','f','t', 0,
'g','u','i','l','s','i','n','g','l','l','e','f','t', 0,
'g','u','i','l','s','i','n','g','l','r','i','g','h','t', 0,
'f','i', 0,
'f','l', 0,
'e','n','d','a','s','h', 0,
'd','a','g','g','e','r', 0,
'd','a','g','g','e','r','d','b','l', 0,
'p','e','r','i','o','d','c','e','n','t','e','r','e','d', 0,
'p','a','r','a','g','r','a','p','h', 0,
'b','u','l','l','e','t', 0,
'q','u','o','t','e','s','i','n','g','l','b','a','s','e', 0,
'q','u','o','t','e','d','b','l','b','a','s','e', 0,
'q','u','o','t','e','d','b','l','r','i','g','h','t', 0,
'g','u','i','l','l','e','m','o','t','r','i','g','h','t', 0,
'e','l','l','i','p','s','i','s', 0,
'p','e','r','t','h','o','u','s','a','n','d', 0,
'q','u','e','s','t','i','o','n','d','o','w','n', 0,
'g','r','a','v','e', 0,
'a','c','u','t','e', 0,
'c','i','r','c','u','m','f','l','e','x', 0,
't','i','l','d','e', 0,
'm','a','c','r','o','n', 0,
'b','r','e','v','e', 0,
'd','o','t','a','c','c','e','n','t', 0,
'd','i','e','r','e','s','i','s', 0,
'r','i','n','g', 0,
'c','e','d','i','l','l','a', 0,
'h','u','n','g','a','r','u','m','l','a','u','t', 0,
'o','g','o','n','e','k', 0,
'c','a','r','o','n', 0,
'e','m','d','a','s','h', 0,
'A','E', 0,
'o','r','d','f','e','m','i','n','i','n','e', 0,
'L','s','l','a','s','h', 0,
'O','s','l','a','s','h', 0,
'O','E', 0,
'o','r','d','m','a','s','c','u','l','i','n','e', 0,
'a','e', 0,
'd','o','t','l','e','s','s','i', 0,
'l','s','l','a','s','h', 0,
'o','s','l','a','s','h', 0,
'o','e', 0,
'g','e','r','m','a','n','d','b','l','s', 0,
'o','n','e','s','u','p','e','r','i','o','r', 0,
'l','o','g','i','c','a','l','n','o','t', 0,
'm','u', 0,
't','r','a','d','e','m','a','r','k', 0,
'E','t','h', 0,
'o','n','e','h','a','l','f', 0,
'p','l','u','s','m','i','n','u','s', 0,
'T','h','o','r','n', 0,
'o','n','e','q','u','a','r','t','e','r', 0,
'd','i','v','i','d','e', 0,
'b','r','o','k','e','n','b','a','r', 0,
'd','e','g','r','e','e', 0,
't','h','o','r','n', 0,
't','h','r','e','e','q','u','a','r','t','e','r','s', 0,
't','w','o','s','u','p','e','r','i','o','r', 0,
'r','e','g','i','s','t','e','r','e','d', 0,
'm','i','n','u','s', 0,
'e','t','h', 0,
'm','u','l','t','i','p','l','y', 0,
't','h','r','e','e','s','u','p','e','r','i','o','r', 0,
'c','o','p','y','r','i','g','h','t', 0,
'A','a','c','u','t','e', 0,
'A','c','i','r','c','u','m','f','l','e','x', 0,
'A','d','i','e','r','e','s','i','s', 0,
'A','g','r','a','v','e', 0,
'A','r','i','n','g', 0,
'A','t','i','l','d','e', 0,
'C','c','e','d','i','l','l','a', 0,
'E','a','c','u','t','e', 0,
'E','c','i','r','c','u','m','f','l','e','x', 0,
'E','d','i','e','r','e','s','i','s', 0,
'E','g','r','a','v','e', 0,
'I','a','c','u','t','e', 0,
'I','c','i','r','c','u','m','f','l','e','x', 0,
'I','d','i','e','r','e','s','i','s', 0,
'I','g','r','a','v','e', 0,
'N','t','i','l','d','e', 0,
'O','a','c','u','t','e', 0,
'O','c','i','r','c','u','m','f','l','e','x', 0,
'O','d','i','e','r','e','s','i','s', 0,
'O','g','r','a','v','e', 0,
'O','t','i','l','d','e', 0,
'S','c','a','r','o','n', 0,
'U','a','c','u','t','e', 0,
'U','c','i','r','c','u','m','f','l','e','x', 0,
'U','d','i','e','r','e','s','i','s', 0,
'U','g','r','a','v','e', 0,
'Y','a','c','u','t','e', 0,
'Y','d','i','e','r','e','s','i','s', 0,
'Z','c','a','r','o','n', 0,
'a','a','c','u','t','e', 0,
'a','c','i','r','c','u','m','f','l','e','x', 0,
'a','d','i','e','r','e','s','i','s', 0,
'a','g','r','a','v','e', 0,
'a','r','i','n','g', 0,
'a','t','i','l','d','e', 0,
'c','c','e','d','i','l','l','a', 0,
'e','a','c','u','t','e', 0,
'e','c','i','r','c','u','m','f','l','e','x', 0,
'e','d','i','e','r','e','s','i','s', 0,
'e','g','r','a','v','e', 0,
'i','a','c','u','t','e', 0,
'i','c','i','r','c','u','m','f','l','e','x', 0,
'i','d','i','e','r','e','s','i','s', 0,
'i','g','r','a','v','e', 0,
'n','t','i','l','d','e', 0,
'o','a','c','u','t','e', 0,
'o','c','i','r','c','u','m','f','l','e','x', 0,
'o','d','i','e','r','e','s','i','s', 0,
'o','g','r','a','v','e', 0,
'o','t','i','l','d','e', 0,
's','c','a','r','o','n', 0,
'u','a','c','u','t','e', 0,
'u','c','i','r','c','u','m','f','l','e','x', 0,
'u','d','i','e','r','e','s','i','s', 0,
'u','g','r','a','v','e', 0,
'y','a','c','u','t','e', 0,
'y','d','i','e','r','e','s','i','s', 0,
'z','c','a','r','o','n', 0,
'e','x','c','l','a','m','s','m','a','l','l', 0,
'H','u','n','g','a','r','u','m','l','a','u','t','s','m','a','l','l', 0,
'd','o','l','l','a','r','o','l','d','s','t','y','l','e', 0,
'd','o','l','l','a','r','s','u','p','e','r','i','o','r', 0,
'a','m','p','e','r','s','a','n','d','s','m','a','l','l', 0,
'A','c','u','t','e','s','m','a','l','l', 0,
'p','a','r','e','n','l','e','f','t','s','u','p','e','r','i','o','r', 0,
'p','a','r','e','n','r','i','g','h','t','s','u','p','e','r','i','o','r', 0,
't','w','o','d','o','t','e','n','l','e','a','d','e','r', 0,
'o','n','e','d','o','t','e','n','l','e','a','d','e','r', 0,
'z','e','r','o','o','l','d','s','t','y','l','e', 0,
'o','n','e','o','l','d','s','t','y','l','e', 0,
't','w','o','o','l','d','s','t','y','l','e', 0,
't','h','r','e','e','o','l','d','s','t','y','l','e', 0,
'f','o','u','r','o','l','d','s','t','y','l','e', 0,
'f','i','v','e','o','l','d','s','t','y','l','e', 0,
's','i','x','o','l','d','s','t','y','l','e', 0,
's','e','v','e','n','o','l','d','s','t','y','l','e', 0,
'e','i','g','h','t','o','l','d','s','t','y','l','e', 0,
'n','i','n','e','o','l','d','s','t','y','l','e', 0,
'c','o','m','m','a','s','u','p','e','r','i','o','r', 0,
't','h','r','e','e','q','u','a','r','t','e','r','s','e','m','d','a','s','h', 0,
'p','e','r','i','o','d','s','u','p','e','r','i','o','r', 0,
'q','u','e','s','t','i','o','n','s','m','a','l','l', 0,
'a','s','u','p','e','r','i','o','r', 0,
'b','s','u','p','e','r','i','o','r', 0,
'c','e','n','t','s','u','p','e','r','i','o','r', 0,
'd','s','u','p','e','r','i','o','r', 0,
'e','s','u','p','e','r','i','o','r', 0,
'i','s','u','p','e','r','i','o','r', 0,
'l','s','u','p','e','r','i','o','r', 0,
'm','s','u','p','e','r','i','o','r', 0,
'n','s','u','p','e','r','i','o','r', 0,
'o','s','u','p','e','r','i','o','r', 0,
'r','s','u','p','e','r','i','o','r', 0,
's','s','u','p','e','r','i','o','r', 0,
't','s','u','p','e','r','i','o','r', 0,
'f','f', 0,
'f','f','i', 0,
'f','f','l', 0,
'p','a','r','e','n','l','e','f','t','i','n','f','e','r','i','o','r', 0,
'p','a','r','e','n','r','i','g','h','t','i','n','f','e','r','i','o','r', 0,
'C','i','r','c','u','m','f','l','e','x','s','m','a','l','l', 0,
'h','y','p','h','e','n','s','u','p','e','r','i','o','r', 0,
'G','r','a','v','e','s','m','a','l','l', 0,
'A','s','m','a','l','l', 0,
'B','s','m','a','l','l', 0,
'C','s','m','a','l','l', 0,
'D','s','m','a','l','l', 0,
'E','s','m','a','l','l', 0,
'F','s','m','a','l','l', 0,
'G','s','m','a','l','l', 0,
'H','s','m','a','l','l', 0,
'I','s','m','a','l','l', 0,
'J','s','m','a','l','l', 0,
'K','s','m','a','l','l', 0,
'L','s','m','a','l','l', 0,
'M','s','m','a','l','l', 0,
'N','s','m','a','l','l', 0,
'O','s','m','a','l','l', 0,
'P','s','m','a','l','l', 0,
'Q','s','m','a','l','l', 0,
'R','s','m','a','l','l', 0,
'S','s','m','a','l','l', 0,
'T','s','m','a','l','l', 0,
'U','s','m','a','l','l', 0,
'V','s','m','a','l','l', 0,
'W','s','m','a','l','l', 0,
'X','s','m','a','l','l', 0,
'Y','s','m','a','l','l', 0,
'Z','s','m','a','l','l', 0,
'c','o','l','o','n','m','o','n','e','t','a','r','y', 0,
'o','n','e','f','i','t','t','e','d', 0,
'r','u','p','i','a','h', 0,
'T','i','l','d','e','s','m','a','l','l', 0,
'e','x','c','l','a','m','d','o','w','n','s','m','a','l','l', 0,
'c','e','n','t','o','l','d','s','t','y','l','e', 0,
'L','s','l','a','s','h','s','m','a','l','l', 0,
'S','c','a','r','o','n','s','m','a','l','l', 0,
'Z','c','a','r','o','n','s','m','a','l','l', 0,
'D','i','e','r','e','s','i','s','s','m','a','l','l', 0,
'B','r','e','v','e','s','m','a','l','l', 0,
'C','a','r','o','n','s','m','a','l','l', 0,
'D','o','t','a','c','c','e','n','t','s','m','a','l','l', 0,
'M','a','c','r','o','n','s','m','a','l','l', 0,
'f','i','g','u','r','e','d','a','s','h', 0,
'h','y','p','h','e','n','i','n','f','e','r','i','o','r', 0,
'O','g','o','n','e','k','s','m','a','l','l', 0,
'R','i','n','g','s','m','a','l','l', 0,
'C','e','d','i','l','l','a','s','m','a','l','l', 0,
'q','u','e','s','t','i','o','n','d','o','w','n','s','m','a','l','l', 0,
'o','n','e','e','i','g','h','t','h', 0,
't','h','r','e','e','e','i','g','h','t','h','s', 0,
'f','i','v','e','e','i','g','h','t','h','s', 0,
's','e','v','e','n','e','i','g','h','t','h','s', 0,
'o','n','e','t','h','i','r','d', 0,
't','w','o','t','h','i','r','d','s', 0,
'z','e','r','o','s','u','p','e','r','i','o','r', 0,
'f','o','u','r','s','u','p','e','r','i','o','r', 0,
'f','i','v','e','s','u','p','e','r','i','o','r', 0,
's','i','x','s','u','p','e','r','i','o','r', 0,
's','e','v','e','n','s','u','p','e','r','i','o','r', 0,
'e','i','g','h','t','s','u','p','e','r','i','o','r', 0,
'n','i','n','e','s','u','p','e','r','i','o','r', 0,
'z','e','r','o','i','n','f','e','r','i','o','r', 0,
'o','n','e','i','n','f','e','r','i','o','r', 0,
't','w','o','i','n','f','e','r','i','o','r', 0,
't','h','r','e','e','i','n','f','e','r','i','o','r', 0,
'f','o','u','r','i','n','f','e','r','i','o','r', 0,
'f','i','v','e','i','n','f','e','r','i','o','r', 0,
's','i','x','i','n','f','e','r','i','o','r', 0,
's','e','v','e','n','i','n','f','e','r','i','o','r', 0,
'e','i','g','h','t','i','n','f','e','r','i','o','r', 0,
'n','i','n','e','i','n','f','e','r','i','o','r', 0,
'c','e','n','t','i','n','f','e','r','i','o','r', 0,
'd','o','l','l','a','r','i','n','f','e','r','i','o','r', 0,
'p','e','r','i','o','d','i','n','f','e','r','i','o','r', 0,
'c','o','m','m','a','i','n','f','e','r','i','o','r', 0,
'A','g','r','a','v','e','s','m','a','l','l', 0,
'A','a','c','u','t','e','s','m','a','l','l', 0,
'A','c','i','r','c','u','m','f','l','e','x','s','m','a','l','l', 0,
'A','t','i','l','d','e','s','m','a','l','l', 0,
'A','d','i','e','r','e','s','i','s','s','m','a','l','l', 0,
'A','r','i','n','g','s','m','a','l','l', 0,
'A','E','s','m','a','l','l', 0,
'C','c','e','d','i','l','l','a','s','m','a','l','l', 0,
'E','g','r','a','v','e','s','m','a','l','l', 0,
'E','a','c','u','t','e','s','m','a','l','l', 0,
'E','c','i','r','c','u','m','f','l','e','x','s','m','a','l','l', 0,
'E','d','i','e','r','e','s','i','s','s','m','a','l','l', 0,
'I','g','r','a','v','e','s','m','a','l','l', 0,
'I','a','c','u','t','e','s','m','a','l','l', 0,
'I','c','i','r','c','u','m','f','l','e','x','s','m','a','l','l', 0,
'I','d','i','e','r','e','s','i','s','s','m','a','l','l', 0,
'E','t','h','s','m','a','l','l', 0,
'N','t','i','l','d','e','s','m','a','l','l', 0,
'O','g','r','a','v','e','s','m','a','l','l', 0,
'O','a','c','u','t','e','s','m','a','l','l', 0,
'O','c','i','r','c','u','m','f','l','e','x','s','m','a','l','l', 0,
'O','t','i','l','d','e','s','m','a','l','l', 0,
'O','d','i','e','r','e','s','i','s','s','m','a','l','l', 0,
'O','E','s','m','a','l','l', 0,
'O','s','l','a','s','h','s','m','a','l','l', 0,
'U','g','r','a','v','e','s','m','a','l','l', 0,
'U','a','c','u','t','e','s','m','a','l','l', 0,
'U','c','i','r','c','u','m','f','l','e','x','s','m','a','l','l', 0,
'U','d','i','e','r','e','s','i','s','s','m','a','l','l', 0,
'Y','a','c','u','t','e','s','m','a','l','l', 0,
'T','h','o','r','n','s','m','a','l','l', 0,
'Y','d','i','e','r','e','s','i','s','s','m','a','l','l', 0,
'0','0','1','.','0','0','0', 0,
'0','0','1','.','0','0','1', 0,
'0','0','1','.','0','0','2', 0,
'0','0','1','.','0','0','3', 0,
'B','l','a','c','k', 0,
'B','o','l','d', 0,
'B','o','o','k', 0,
'L','i','g','h','t', 0,
'M','e','d','i','u','m', 0,
'R','e','g','u','l','a','r', 0,
'R','o','m','a','n', 0,
'S','e','m','i','b','o','l','d', 0,
};
#define FT_NUM_MAC_NAMES 258
/* Values are offsets into the `ft_standard_glyph_names' table */
static const short ft_mac_names[FT_NUM_MAC_NAMES] =
{
253, 0, 6, 261, 267, 274, 283, 294, 301, 309, 758, 330, 340, 351,
360, 365, 371, 378, 385, 391, 396, 400, 404, 410, 415, 420, 424, 430,
436, 441, 447, 457, 462, 468, 476, 485, 488, 490, 492, 494, 496, 498,
500, 502, 504, 506, 508, 510, 512, 514, 516, 518, 520, 522, 524, 526,
528, 530, 532, 534, 536, 538, 540, 552, 562, 575, 587, 979, 608, 610,
612, 614, 616, 618, 620, 622, 624, 626, 628, 630, 632, 634, 636, 638,
640, 642, 644, 646, 648, 650, 652, 654, 656, 658, 660, 670, 674, 685,
1375,1392,1405,1414,1486,1512,1562,1603,1632,1610,1622,1645,1639,1652,
1661,1690,1668,1680,1697,1726,1704,1716,1733,1740,1769,1747,1759,1776,
1790,1819,1797,1809, 839,1263, 707, 712, 741, 881, 871,1160,1302,1346,
1197, 985,1031, 23,1086,1108, 32,1219, 41, 51, 730,1194, 64, 76,
86, 94, 97,1089,1118, 106,1131,1150, 966, 696,1183, 112, 734, 120,
132, 783, 930, 945, 138,1385,1398,1529,1115,1157, 832,1079, 770, 916,
598, 319,1246, 155,1833,1586, 721, 749, 797, 811, 826, 829, 846, 856,
888, 903, 954,1363,1421,1356,1433,1443,1450,1457,1469,1479,1493,1500,
163,1522,1543,1550,1572,1134, 991,1002,1008,1015,1021,1040,1045,1053,
1066,1073,1101,1143,1536,1783,1596,1843,1253,1207,1319,1579,1826,1229,
1270,1313,1323,1171,1290,1332,1211,1235,1276, 169, 175, 182, 189, 200,
209, 218, 225, 232, 239, 246
};
#define FT_NUM_SID_NAMES 391
/* Values are offsets into the `ft_standard_glyph_names' table */
static const short ft_sid_names[FT_NUM_SID_NAMES] =
{
253, 261, 267, 274, 283, 294, 301, 309, 319, 330, 340, 351, 360, 365,
371, 378, 385, 391, 396, 400, 404, 410, 415, 420, 424, 430, 436, 441,
447, 457, 462, 468, 476, 485, 488, 490, 492, 494, 496, 498, 500, 502,
504, 506, 508, 510, 512, 514, 516, 518, 520, 522, 524, 526, 528, 530,
532, 534, 536, 538, 540, 552, 562, 575, 587, 598, 608, 610, 612, 614,
616, 618, 620, 622, 624, 626, 628, 630, 632, 634, 636, 638, 640, 642,
644, 646, 648, 650, 652, 654, 656, 658, 660, 670, 674, 685, 696, 707,
712, 721, 730, 734, 741, 749, 758, 770, 783, 797, 811, 826, 829, 832,
839, 846, 856, 871, 881, 888, 903, 916, 930, 945, 954, 966, 979, 985,
991,1002,1008,1015,1021,1031,1040,1045,1053,1066,1073,1079,1086,1089,
1101,1108,1115,1118,1131,1134,1143,1150,1157,1160,1171,1183,1194,1197,
1207,1211,1219,1229,1235,1246,1253,1263,1270,1276,1290,1302,1313,1319,
1323,1332,1346,1356,1363,1375,1385,1392,1398,1405,1414,1421,1433,1443,
1450,1457,1469,1479,1486,1493,1500,1512,1522,1529,1536,1543,1550,1562,
1572,1579,1586,1596,1603,1610,1622,1632,1639,1645,1652,1661,1668,1680,
1690,1697,1704,1716,1726,1733,1740,1747,1759,1769,1776,1783,1790,1797,
1809,1819,1826,1833,1843,1850,1862,1880,1895,1910,1925,1936,1954,1973,
1988,2003,2016,2028,2040,2054,2067,2080,2092,2106,2120,2133,2147,2167,
2182,2196,2206,2216,2229,2239,2249,2259,2269,2279,2289,2299,2309,2319,
2329,2332,2336,2340,2358,2377,2393,2408,2419,2426,2433,2440,2447,2454,
2461,2468,2475,2482,2489,2496,2503,2510,2517,2524,2531,2538,2545,2552,
2559,2566,2573,2580,2587,2594,2601,2615,2625,2632,2643,2659,2672,2684,
2696,2708,2722,2733,2744,2759,2771,2782,2797,2809,2819,2832,2850,2860,
2873,2885,2898,2907,2917,2930,2943,2956,2968,2982,2996,3009,3022,3034,
3046,3060,3073,3086,3098,3112,3126,3139,3152,3167,3182,3196,3208,3220,
3237,3249,3264,3275,3283,3297,3309,3321,3338,3353,3365,3377,3394,3409,
3418,3430,3442,3454,3471,3483,3498,3506,3518,3530,3542,3559,3574,3586,
3597,3612,3620,3628,3636,3644,3650,3655,3660,3666,3673,3681,3687
};
/* the following are indices into the SID name table */
static const unsigned short t1_standard_encoding[256] =
{
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64,
65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80,
81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 96, 97, 98, 99,100,101,102,103,104,105,106,107,108,109,110,
0,111,112,113,114, 0,115,116,117,118,119,120,121,122, 0,123,
0,124,125,126,127,128,129,130,131, 0,132,133, 0,134,135,136,
137, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0,138, 0,139, 0, 0, 0, 0,140,141,142,143, 0, 0, 0, 0,
0,144, 0, 0, 0,145, 0, 0,146,147,148,149, 0, 0, 0, 0
};
/* the following are indices into the SID name table */
static const unsigned short t1_expert_encoding[256] =
{
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1,229,230, 0,231,232,233,234,235,236,237,238, 13, 14, 15, 99,
239,240,241,242,243,244,245,246,247,248, 27, 28,249,250,251,252,
0,253,254,255,256,257, 0, 0, 0,258, 0, 0,259,260,261,262,
0, 0,263,264,265, 0,266,109,110,267,268,269, 0,270,271,272,
273,274,275,276,277,278,279,280,281,282,283,284,285,286,287,288,
289,290,291,292,293,294,295,296,297,298,299,300,301,302,303, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0,304,305,306, 0, 0,307,308,309,310,311, 0,312, 0, 0,313,
0, 0,314,315, 0, 0,316,317,318, 0, 0, 0,158,155,163,319,
320,321,322,323,324,325, 0, 0,326,150,164,169,327,328,329,330,
331,332,333,334,335,336,337,338,339,340,341,342,343,344,345,346,
347,348,349,350,351,352,353,354,355,356,357,358,359,360,361,362,
363,364,365,366,367,368,369,370,371,372,373,374,375,376,377,378
};
/*
* This table is a compressed version of the Adobe Glyph List (AGL),
* optimized for efficient searching. It has been generated by the
* `glnames.py' python script located in the `src/tools' directory.
*
* The lookup function to get the Unicode value for a given string
* is defined below the table.
*/
static const unsigned char ft_adobe_glyph_list[55997L] =
{
0, 52, 0,106, 2,167, 3, 63, 4,220, 6,125, 9,143, 10, 23,
11,137, 12,199, 14,246, 15, 87, 16,233, 17,219, 18,104, 19, 88,
22,110, 23, 32, 23, 71, 24, 77, 27,156, 29, 73, 31,247, 32,107,
32,222, 33, 55, 34,154, 35,218, 58, 10, 64,122, 72,188, 80,109,
88,104, 93, 61, 98,168,106, 91,114,111,115,237,122,180,127,255,
135,164,143,132,149,213,158,108,161,115,168,175,183,147,197,199,
202, 25,204,166,208,209,209, 81,215, 26, 65,143, 0, 65, 0,140,
0,175, 0,193, 1, 15, 1,147, 1,233, 1,251, 2, 7, 2, 40,
2, 57, 2, 82, 2, 91, 2,128, 2,136, 2,154, 69,131, 0,198,
0,150, 0,158, 0,167,225,227,245,244,101,128, 1,252,237,225,
227,242,239,110,128, 1,226,243,237,225,236,108,128,247,230,225,
227,245,244,101,129, 0,193, 0,185,243,237,225,236,108,128,247,
225,226,242,229,246,101,134, 1, 2, 0,213, 0,221, 0,232, 0,
243, 0,251, 1, 7,225,227,245,244,101,128, 30,174,227,249,242,
233,236,236,233, 99,128, 4,208,228,239,244,226,229,236,239,119,
128, 30,182,231,242,225,246,101,128, 30,176,232,239,239,235,225,
226,239,246,101,128, 30,178,244,233,236,228,101,128, 30,180, 99,
4, 1, 25, 1, 32, 1,121, 1,137,225,242,239,110,128, 1,205,
233,242, 99, 2, 1, 40, 1, 45,236,101,128, 36,182,245,237,230,
236,229,120,134, 0,194, 1, 66, 1, 74, 1, 85, 1, 93, 1,105,
1,113,225,227,245,244,101,128, 30,164,228,239,244,226,229,236,
239,119,128, 30,172,231,242,225,246,101,128, 30,166,232,239,239,
235,225,226,239,246,101,128, 30,168,243,237,225,236,108,128,247,
226,244,233,236,228,101,128, 30,170,245,244,101,129,246,201, 1,
129,243,237,225,236,108,128,247,180,249,242,233,236,236,233, 99,
128, 4, 16,100, 3, 1,155, 1,165, 1,209,226,236,231,242,225,
246,101,128, 2, 0,233,229,242,229,243,233,115,131, 0,196, 1,
181, 1,192, 1,201,227,249,242,233,236,236,233, 99,128, 4,210,
237,225,227,242,239,110,128, 1,222,243,237,225,236,108,128,247,
228,239,116, 2, 1,216, 1,224,226,229,236,239,119,128, 30,160,
237,225,227,242,239,110,128, 1,224,231,242,225,246,101,129, 0,
192, 1,243,243,237,225,236,108,128,247,224,232,239,239,235,225,
226,239,246,101,128, 30,162,105, 2, 2, 13, 2, 25,229,227,249,
242,233,236,236,233, 99,128, 4,212,238,246,229,242,244,229,228,
226,242,229,246,101,128, 2, 2,236,240,232, 97,129, 3,145, 2,
49,244,239,238,239,115,128, 3,134,109, 2, 2, 63, 2, 71,225,
227,242,239,110,128, 1, 0,239,238,239,243,240,225,227,101,128,
255, 33,239,231,239,238,229,107,128, 1, 4,242,233,238,103,131,
0,197, 2,104, 2,112, 2,120,225,227,245,244,101,128, 1,250,
226,229,236,239,119,128, 30, 0,243,237,225,236,108,128,247,229,
243,237,225,236,108,128,247, 97,244,233,236,228,101,129, 0,195,
2,146,243,237,225,236,108,128,247,227,249,226,225,242,237,229,
238,233,225,110,128, 5, 49, 66,137, 0, 66, 2,189, 2,198, 2,
223, 3, 3, 3, 10, 3, 22, 3, 34, 3, 46, 3, 54,227,233,242,
227,236,101,128, 36,183,228,239,116, 2, 2,206, 2,215,225,227,
227,229,238,116,128, 30, 2,226,229,236,239,119,128, 30, 4,101,
3, 2,231, 2,242, 2,254,227,249,242,233,236,236,233, 99,128,
4, 17,238,225,242,237,229,238,233,225,110,128, 5, 50,244, 97,
128, 3,146,232,239,239,107,128, 1,129,236,233,238,229,226,229,
236,239,119,128, 30, 6,237,239,238,239,243,240,225,227,101,128,
255, 34,242,229,246,229,243,237,225,236,108,128,246,244,243,237,
225,236,108,128,247, 98,244,239,240,226,225,114,128, 1,130, 67,
137, 0, 67, 3, 85, 3,127, 3,193, 3,210, 3,224, 4,171, 4,
188, 4,200, 4,212, 97, 3, 3, 93, 3,104, 3,111,225,242,237,
229,238,233,225,110,128, 5, 62,227,245,244,101,128, 1, 6,242,
239,110,129,246,202, 3,119,243,237,225,236,108,128,246,245, 99,
3, 3,135, 3,142, 3,171,225,242,239,110,128, 1, 12,229,228,
233,236,236, 97,130, 0,199, 3,155, 3,163,225,227,245,244,101,
128, 30, 8,243,237,225,236,108,128,247,231,233,242, 99, 2, 3,
179, 3,184,236,101,128, 36,184,245,237,230,236,229,120,128, 1,
8,228,239,116,129, 1, 10, 3,201,225,227,227,229,238,116,128,
1, 10,229,228,233,236,236,225,243,237,225,236,108,128,247,184,
104, 4, 3,234, 3,246, 4,161, 4,165,225,225,242,237,229,238,
233,225,110,128, 5, 73,101, 6, 4, 4, 4, 24, 4, 35, 4,103,
4,115, 4,136,225,226,235,232,225,243,233,225,238,227,249,242,
233,236,236,233, 99,128, 4,188,227,249,242,233,236,236,233, 99,
128, 4, 39,100, 2, 4, 41, 4, 85,229,243,227,229,238,228,229,
114, 2, 4, 54, 4, 74,225,226,235,232,225,243,233,225,238,227,
249,242,233,236,236,233, 99,128, 4,190,227,249,242,233,236,236,
233, 99,128, 4,182,233,229,242,229,243,233,243,227,249,242,233,
236,236,233, 99,128, 4,244,232,225,242,237,229,238,233,225,110,
128, 5, 67,235,232,225,235,225,243,243,233,225,238,227,249,242,
233,236,236,233, 99,128, 4,203,246,229,242,244,233,227,225,236,
243,244,242,239,235,229,227,249,242,233,236,236,233, 99,128, 4,
184,105,128, 3,167,239,239,107,128, 1,135,233,242,227,245,237,
230,236,229,248,243,237,225,236,108,128,246,246,237,239,238,239,
243,240,225,227,101,128,255, 35,239,225,242,237,229,238,233,225,
110,128, 5, 81,243,237,225,236,108,128,247, 99, 68,142, 0, 68,
4,252, 5, 10, 5, 36, 5, 96, 5,121, 5,166, 5,173, 5,231,
5,244, 6, 0, 6, 12, 6, 28, 6, 48, 6, 57, 90,129, 1,241,
5, 2,227,225,242,239,110,128, 1,196, 97, 2, 5, 16, 5, 27,
225,242,237,229,238,233,225,110,128, 5, 52,230,242,233,227,225,
110,128, 1,137, 99, 4, 5, 46, 5, 53, 5, 62, 5, 89,225,242,
239,110,128, 1, 14,229,228,233,236,236, 97,128, 30, 16,233,242,
99, 2, 5, 70, 5, 75,236,101,128, 36,185,245,237,230,236,229,
248,226,229,236,239,119,128, 30, 18,242,239,225,116,128, 1, 16,
228,239,116, 2, 5,104, 5,113,225,227,227,229,238,116,128, 30,
10,226,229,236,239,119,128, 30, 12,101, 3, 5,129, 5,140, 5,
150,227,249,242,233,236,236,233, 99,128, 4, 20,233,227,239,240,
244,233, 99,128, 3,238,236,244, 97,129, 34, 6, 5,158,231,242,
229,229,107,128, 3,148,232,239,239,107,128, 1,138,105, 2, 5,
179, 5,218,229,242,229,243,233,115,131,246,203, 5,194, 5,202,
5,210,193,227,245,244,101,128,246,204,199,242,225,246,101,128,
246,205,243,237,225,236,108,128,247,168,231,225,237,237,225,231,
242,229,229,107,128, 3,220,234,229,227,249,242,233,236,236,233,
99,128, 4, 2,236,233,238,229,226,229,236,239,119,128, 30, 14,
237,239,238,239,243,240,225,227,101,128,255, 36,239,244,225,227,
227,229,238,244,243,237,225,236,108,128,246,247,115, 2, 6, 34,
6, 41,236,225,243,104,128, 1, 16,237,225,236,108,128,247,100,
244,239,240,226,225,114,128, 1,139,122,131, 1,242, 6, 67, 6,
75, 6,112,227,225,242,239,110,128, 1,197,101, 2, 6, 81, 6,
101,225,226,235,232,225,243,233,225,238,227,249,242,233,236,236,
233, 99,128, 4,224,227,249,242,233,236,236,233, 99,128, 4, 5,
232,229,227,249,242,233,236,236,233, 99,128, 4, 15, 69,146, 0,
69, 6,165, 6,183, 6,191, 7, 89, 7,153, 7,165, 7,183, 7,
211, 8, 7, 8, 36, 8, 94, 8,169, 8,189, 8,208, 8,248, 9,
44, 9,109, 9,115,225,227,245,244,101,129, 0,201, 6,175,243,
237,225,236,108,128,247,233,226,242,229,246,101,128, 1, 20, 99,
5, 6,203, 6,210, 6,224, 6,236, 7, 79,225,242,239,110,128,
1, 26,229,228,233,236,236,225,226,242,229,246,101,128, 30, 28,
232,225,242,237,229,238,233,225,110,128, 5, 53,233,242, 99, 2,
6,244, 6,249,236,101,128, 36,186,245,237,230,236,229,120,135,
0,202, 7, 16, 7, 24, 7, 32, 7, 43, 7, 51, 7, 63, 7, 71,
225,227,245,244,101,128, 30,190,226,229,236,239,119,128, 30, 24,
228,239,244,226,229,236,239,119,128, 30,198,231,242,225,246,101,
128, 30,192,232,239,239,235,225,226,239,246,101,128, 30,194,243,
237,225,236,108,128,247,234,244,233,236,228,101,128, 30,196,249,
242,233,236,236,233, 99,128, 4, 4,100, 3, 7, 97, 7,107, 7,
127,226,236,231,242,225,246,101,128, 2, 4,233,229,242,229,243,
233,115,129, 0,203, 7,119,243,237,225,236,108,128,247,235,239,
116,130, 1, 22, 7,136, 7,145,225,227,227,229,238,116,128, 1,
22,226,229,236,239,119,128, 30,184,230,227,249,242,233,236,236,
233, 99,128, 4, 36,231,242,225,246,101,129, 0,200, 7,175,243,
237,225,236,108,128,247,232,104, 2, 7,189, 7,200,225,242,237,
229,238,233,225,110,128, 5, 55,239,239,235,225,226,239,246,101,
128, 30,186,105, 3, 7,219, 7,230, 7,245,231,232,244,242,239,
237,225,110,128, 33,103,238,246,229,242,244,229,228,226,242,229,
246,101,128, 2, 6,239,244,233,230,233,229,228,227,249,242,233,
236,236,233, 99,128, 4,100,108, 2, 8, 13, 8, 24,227,249,242,
233,236,236,233, 99,128, 4, 27,229,246,229,238,242,239,237,225,
110,128, 33,106,109, 3, 8, 44, 8, 72, 8, 83,225,227,242,239,
110,130, 1, 18, 8, 56, 8, 64,225,227,245,244,101,128, 30, 22,
231,242,225,246,101,128, 30, 20,227,249,242,233,236,236,233, 99,
128, 4, 28,239,238,239,243,240,225,227,101,128,255, 37,110, 4,
8,104, 8,115, 8,135, 8,154,227,249,242,233,236,236,233, 99,
128, 4, 29,228,229,243,227,229,238,228,229,242,227,249,242,233,
236,236,233, 99,128, 4,162,103,129, 1, 74, 8,141,232,229,227,
249,242,233,236,236,233, 99,128, 4,164,232,239,239,235,227,249,
242,233,236,236,233, 99,128, 4,199,111, 2, 8,175, 8,183,231,
239,238,229,107,128, 1, 24,240,229,110,128, 1,144,240,243,233,
236,239,110,129, 3,149, 8,200,244,239,238,239,115,128, 3,136,
114, 2, 8,214, 8,225,227,249,242,233,236,236,233, 99,128, 4,
32,229,246,229,242,243,229,100,129, 1,142, 8,237,227,249,242,
233,236,236,233, 99,128, 4, 45,115, 4, 9, 2, 9, 13, 9, 33,
9, 37,227,249,242,233,236,236,233, 99,128, 4, 33,228,229,243,
227,229,238,228,229,242,227,249,242,233,236,236,233, 99,128, 4,
170,104,128, 1,169,237,225,236,108,128,247,101,116, 3, 9, 52,
9, 78, 9, 92, 97,130, 3,151, 9, 60, 9, 70,242,237,229,238,
233,225,110,128, 5, 56,244,239,238,239,115,128, 3,137,104,129,
0,208, 9, 84,243,237,225,236,108,128,247,240,233,236,228,101,
129, 30,188, 9,101,226,229,236,239,119,128, 30, 26,245,242,111,
128, 32,172,250,104,130, 1,183, 9,124, 9,132,227,225,242,239,
110,128, 1,238,242,229,246,229,242,243,229,100,128, 1,184, 70,
136, 0, 70, 9,163, 9,172, 9,184, 9,212, 9,219, 9,248, 10,
4, 10, 15,227,233,242,227,236,101,128, 36,187,228,239,244,225,
227,227,229,238,116,128, 30, 30,101, 2, 9,190, 9,202,232,225,
242,237,229,238,233,225,110,128, 5, 86,233,227,239,240,244,233,
99,128, 3,228,232,239,239,107,128, 1,145,105, 2, 9,225, 9,
238,244,225,227,249,242,233,236,236,233, 99,128, 4,114,246,229,
242,239,237,225,110,128, 33,100,237,239,238,239,243,240,225,227,
101,128,255, 38,239,245,242,242,239,237,225,110,128, 33, 99,243,
237,225,236,108,128,247,102, 71,140, 0, 71, 10, 51, 10, 61, 10,
107, 10,115, 10,176, 10,193, 10,205, 11, 39, 11, 52, 11, 65, 11,
90, 11,107,194,243,241,245,225,242,101,128, 51,135, 97, 3, 10,
69, 10, 76, 10, 94,227,245,244,101,128, 1,244,237,237, 97,129,
3,147, 10, 84,225,230,242,233,227,225,110,128, 1,148,238,231,
233,225,227,239,240,244,233, 99,128, 3,234,226,242,229,246,101,
128, 1, 30, 99, 4, 10,125, 10,132, 10,141, 10,163,225,242,239,
110,128, 1,230,229,228,233,236,236, 97,128, 1, 34,233,242, 99,
2, 10,149, 10,154,236,101,128, 36,188,245,237,230,236,229,120,
128, 1, 28,239,237,237,225,225,227,227,229,238,116,128, 1, 34,
228,239,116,129, 1, 32, 10,184,225,227,227,229,238,116,128, 1,
32,229,227,249,242,233,236,236,233, 99,128, 4, 19,104, 3, 10,
213, 10,226, 11, 33,225,228,225,242,237,229,238,233,225,110,128,
5, 66,101, 3, 10,234, 10,255, 11, 16,237,233,228,228,236,229,
232,239,239,235,227,249,242,233,236,236,233, 99,128, 4,148,243,
244,242,239,235,229,227,249,242,233,236,236,233, 99,128, 4,146,
245,240,244,245,242,238,227,249,242,233,236,236,233, 99,128, 4,
144,239,239,107,128, 1,147,233,237,225,242,237,229,238,233,225,
110,128, 5, 51,234,229,227,249,242,233,236,236,233, 99,128, 4,
3,109, 2, 11, 71, 11, 79,225,227,242,239,110,128, 30, 32,239,
238,239,243,240,225,227,101,128,255, 39,242,225,246,101,129,246,
206, 11, 99,243,237,225,236,108,128,247, 96,115, 2, 11,113, 11,
129,237,225,236,108,129,247,103, 11,122,232,239,239,107,128, 2,
155,244,242,239,235,101,128, 1,228, 72,140, 0, 72, 11,165, 11,
190, 11,198, 11,208, 12, 17, 12, 40, 12, 77, 12,117, 12,129, 12,
157, 12,165, 12,189,177,184, 53, 3, 11,175, 11,180, 11,185,179,
51,128, 37,207,180, 51,128, 37,170,181, 49,128, 37,171,178,178,
176,183, 51,128, 37,161,208,243,241,245,225,242,101,128, 51,203,
97, 3, 11,216, 11,236, 12, 0,225,226,235,232,225,243,233,225,
238,227,249,242,233,236,236,233, 99,128, 4,168,228,229,243,227,
229,238,228,229,242,227,249,242,233,236,236,233, 99,128, 4,178,
242,228,243,233,231,238,227,249,242,233,236,236,233, 99,128, 4,
42, 98, 2, 12, 23, 12, 28,225,114,128, 1, 38,242,229,246,229,
226,229,236,239,119,128, 30, 42, 99, 2, 12, 46, 12, 55,229,228,
233,236,236, 97,128, 30, 40,233,242, 99, 2, 12, 63, 12, 68,236,
101,128, 36,189,245,237,230,236,229,120,128, 1, 36,100, 2, 12,
83, 12, 93,233,229,242,229,243,233,115,128, 30, 38,239,116, 2,
12,100, 12,109,225,227,227,229,238,116,128, 30, 34,226,229,236,
239,119,128, 30, 36,237,239,238,239,243,240,225,227,101,128,255,
40,111, 2, 12,135, 12,146,225,242,237,229,238,233,225,110,128,
5, 64,242,233,227,239,240,244,233, 99,128, 3,232,243,237,225,
236,108,128,247,104,245,238,231,225,242,245,237,236,225,245,116,
129,246,207, 12,181,243,237,225,236,108,128,246,248,250,243,241,
245,225,242,101,128, 51,144, 73,146, 0, 73, 12,239, 12,251, 12,
255, 13, 11, 13, 29, 13, 37, 13, 94, 13,181, 13,214, 13,224, 13,
242, 13,254, 14, 48, 14, 86, 14, 99, 14,166, 14,187, 14,205,193,
227,249,242,233,236,236,233, 99,128, 4, 47, 74,128, 1, 50,213,
227,249,242,233,236,236,233, 99,128, 4, 46,225,227,245,244,101,
129, 0,205, 13, 21,243,237,225,236,108,128,247,237,226,242,229,
246,101,128, 1, 44, 99, 3, 13, 45, 13, 52, 13, 84,225,242,239,
110,128, 1,207,233,242, 99, 2, 13, 60, 13, 65,236,101,128, 36,
190,245,237,230,236,229,120,129, 0,206, 13, 76,243,237,225,236,
108,128,247,238,249,242,233,236,236,233, 99,128, 4, 6,100, 3,
13,102, 13,112, 13,155,226,236,231,242,225,246,101,128, 2, 8,
233,229,242,229,243,233,115,131, 0,207, 13,128, 13,136, 13,147,
225,227,245,244,101,128, 30, 46,227,249,242,233,236,236,233, 99,
128, 4,228,243,237,225,236,108,128,247,239,239,116,130, 1, 48,
13,164, 13,173,225,227,227,229,238,116,128, 1, 48,226,229,236,
239,119,128, 30,202,101, 2, 13,187, 13,203,226,242,229,246,229,
227,249,242,233,236,236,233, 99,128, 4,214,227,249,242,233,236,
236,233, 99,128, 4, 21,230,242,225,235,244,245,114,128, 33, 17,
231,242,225,246,101,129, 0,204, 13,234,243,237,225,236,108,128,
247,236,232,239,239,235,225,226,239,246,101,128, 30,200,105, 3,
14, 6, 14, 17, 14, 32,227,249,242,233,236,236,233, 99,128, 4,
24,238,246,229,242,244,229,228,226,242,229,246,101,128, 2, 10,
243,232,239,242,244,227,249,242,233,236,236,233, 99,128, 4, 25,
109, 2, 14, 54, 14, 75,225,227,242,239,110,129, 1, 42, 14, 64,
227,249,242,233,236,236,233, 99,128, 4,226,239,238,239,243,240,
225,227,101,128,255, 41,238,233,225,242,237,229,238,233,225,110,
128, 5, 59,111, 3, 14,107, 14,118, 14,126,227,249,242,233,236,
236,233, 99,128, 4, 1,231,239,238,229,107,128, 1, 46,244, 97,
131, 3,153, 14,137, 14,147, 14,158,225,230,242,233,227,225,110,
128, 1,150,228,233,229,242,229,243,233,115,128, 3,170,244,239,
238,239,115,128, 3,138,115, 2, 14,172, 14,179,237,225,236,108,
128,247,105,244,242,239,235,101,128, 1,151,244,233,236,228,101,
129, 1, 40, 14,197,226,229,236,239,119,128, 30, 44,250,232,233,
244,243, 97, 2, 14,216, 14,227,227,249,242,233,236,236,233, 99,
128, 4,116,228,226,236,231,242,225,246,229,227,249,242,233,236,
236,233, 99,128, 4,118, 74,134, 0, 74, 15, 6, 15, 18, 15, 41,
15, 53, 15, 67, 15, 79,225,225,242,237,229,238,233,225,110,128,
5, 65,227,233,242, 99, 2, 15, 27, 15, 32,236,101,128, 36,191,
245,237,230,236,229,120,128, 1, 52,229,227,249,242,233,236,236,
233, 99,128, 4, 8,232,229,232,225,242,237,229,238,233,225,110,
128, 5, 75,237,239,238,239,243,240,225,227,101,128,255, 42,243,
237,225,236,108,128,247,106, 75,140, 0, 75, 15,115, 15,125, 15,
135, 16, 18, 16, 65, 16, 76, 16,106, 16,143, 16,156, 16,168, 16,
180, 16,208,194,243,241,245,225,242,101,128, 51,133,203,243,241,
245,225,242,101,128, 51,205, 97, 7, 15,151, 15,169, 15,191, 15,
211, 15,226, 15,232, 15,249,226,225,243,232,235,233,242,227,249,
242,233,236,236,233, 99,128, 4,160, 99, 2, 15,175, 15,181,245,
244,101,128, 30, 48,249,242,233,236,236,233, 99,128, 4, 26,228,
229,243,227,229,238,228,229,242,227,249,242,233,236,236,233, 99,
128, 4,154,232,239,239,235,227,249,242,233,236,236,233, 99,128,
4,195,240,240, 97,128, 3,154,243,244,242,239,235,229,227,249,
242,233,236,236,233, 99,128, 4,158,246,229,242,244,233,227,225,
236,243,244,242,239,235,229,227,249,242,233,236,236,233, 99,128,
4,156, 99, 4, 16, 28, 16, 35, 16, 44, 16, 52,225,242,239,110,
128, 1,232,229,228,233,236,236, 97,128, 1, 54,233,242,227,236,
101,128, 36,192,239,237,237,225,225,227,227,229,238,116,128, 1,
54,228,239,244,226,229,236,239,119,128, 30, 50,101, 2, 16, 82,
16, 94,232,225,242,237,229,238,233,225,110,128, 5, 84,238,225,
242,237,229,238,233,225,110,128, 5, 63,104, 3, 16,114, 16,126,
16,137,225,227,249,242,233,236,236,233, 99,128, 4, 37,229,233,
227,239,240,244,233, 99,128, 3,230,239,239,107,128, 1,152,234,
229,227,249,242,233,236,236,233, 99,128, 4, 12,236,233,238,229,
226,229,236,239,119,128, 30, 52,237,239,238,239,243,240,225,227,
101,128,255, 43,239,240,240, 97, 2, 16,189, 16,200,227,249,242,
233,236,236,233, 99,128, 4,128,231,242,229,229,107,128, 3,222,
115, 2, 16,214, 16,226,233,227,249,242,233,236,236,233, 99,128,
4,110,237,225,236,108,128,247,107, 76,138, 0, 76, 17, 1, 17,
5, 17, 9, 17, 29, 17, 95, 17,133, 17,147, 17,165, 17,177, 17,
189, 74,128, 1,199, 76,128,246,191, 97, 2, 17, 15, 17, 22,227,
245,244,101,128, 1, 57,237,226,228, 97,128, 3,155, 99, 4, 17,
39, 17, 46, 17, 55, 17, 82,225,242,239,110,128, 1, 61,229,228,
233,236,236, 97,128, 1, 59,233,242, 99, 2, 17, 63, 17, 68,236,
101,128, 36,193,245,237,230,236,229,248,226,229,236,239,119,128,
30, 60,239,237,237,225,225,227,227,229,238,116,128, 1, 59,228,
239,116,130, 1, 63, 17,105, 17,114,225,227,227,229,238,116,128,
1, 63,226,229,236,239,119,129, 30, 54, 17,124,237,225,227,242,
239,110,128, 30, 56,233,247,238,225,242,237,229,238,233,225,110,
128, 5, 60,106,129, 1,200, 17,153,229,227,249,242,233,236,236,
233, 99,128, 4, 9,236,233,238,229,226,229,236,239,119,128, 30,
58,237,239,238,239,243,240,225,227,101,128,255, 44,115, 2, 17,
195, 17,212,236,225,243,104,129, 1, 65, 17,204,243,237,225,236,
108,128,246,249,237,225,236,108,128,247,108, 77,137, 0, 77, 17,
241, 17,251, 18, 24, 18, 33, 18, 58, 18, 71, 18, 83, 18, 91, 18,
100,194,243,241,245,225,242,101,128, 51,134,225, 99, 2, 18, 2,
18, 18,242,239,110,129,246,208, 18, 10,243,237,225,236,108,128,
247,175,245,244,101,128, 30, 62,227,233,242,227,236,101,128, 36,
194,228,239,116, 2, 18, 41, 18, 50,225,227,227,229,238,116,128,
30, 64,226,229,236,239,119,128, 30, 66,229,238,225,242,237,229,
238,233,225,110,128, 5, 68,237,239,238,239,243,240,225,227,101,
128,255, 45,243,237,225,236,108,128,247,109,244,245,242,238,229,
100,128, 1,156,117,128, 3,156, 78,141, 0, 78, 18,134, 18,138,
18,146, 18,212, 18,237, 18,248, 19, 3, 19, 21, 19, 33, 19, 45,
19, 58, 19, 66, 19, 84, 74,128, 1,202,225,227,245,244,101,128,
1, 67, 99, 4, 18,156, 18,163, 18,172, 18,199,225,242,239,110,
128, 1, 71,229,228,233,236,236, 97,128, 1, 69,233,242, 99, 2,
18,180, 18,185,236,101,128, 36,195,245,237,230,236,229,248,226,
229,236,239,119,128, 30, 74,239,237,237,225,225,227,227,229,238,
116,128, 1, 69,228,239,116, 2, 18,220, 18,229,225,227,227,229,
238,116,128, 30, 68,226,229,236,239,119,128, 30, 70,232,239,239,
235,236,229,230,116,128, 1,157,233,238,229,242,239,237,225,110,
128, 33,104,106,129, 1,203, 19, 9,229,227,249,242,233,236,236,
233, 99,128, 4, 10,236,233,238,229,226,229,236,239,119,128, 30,
72,237,239,238,239,243,240,225,227,101,128,255, 46,239,247,225,
242,237,229,238,233,225,110,128, 5, 70,243,237,225,236,108,128,
247,110,244,233,236,228,101,129, 0,209, 19, 76,243,237,225,236,
108,128,247,241,117,128, 3,157, 79,141, 0, 79, 19,118, 19,132,
19,150, 19,203, 20, 78, 20,152, 20,187, 21, 48, 21, 69, 21,213,
21,223, 21,254, 22, 53, 69,129, 1, 82, 19,124,243,237,225,236,
108,128,246,250,225,227,245,244,101,129, 0,211, 19,142,243,237,
225,236,108,128,247,243, 98, 2, 19,156, 19,196,225,242,242,229,
100, 2, 19,166, 19,177,227,249,242,233,236,236,233, 99,128, 4,
232,228,233,229,242,229,243,233,243,227,249,242,233,236,236,233,
99,128, 4,234,242,229,246,101,128, 1, 78, 99, 4, 19,213, 19,
220, 19,235, 20, 68,225,242,239,110,128, 1,209,229,238,244,229,
242,229,228,244,233,236,228,101,128, 1,159,233,242, 99, 2, 19,
243, 19,248,236,101,128, 36,196,245,237,230,236,229,120,134, 0,
212, 20, 13, 20, 21, 20, 32, 20, 40, 20, 52, 20, 60,225,227,245,
244,101,128, 30,208,228,239,244,226,229,236,239,119,128, 30,216,
231,242,225,246,101,128, 30,210,232,239,239,235,225,226,239,246,
101,128, 30,212,243,237,225,236,108,128,247,244,244,233,236,228,
101,128, 30,214,249,242,233,236,236,233, 99,128, 4, 30,100, 3,
20, 86, 20,109, 20,142,226,108, 2, 20, 93, 20,101,225,227,245,
244,101,128, 1, 80,231,242,225,246,101,128, 2, 12,233,229,242,
229,243,233,115,130, 0,214, 20,123, 20,134,227,249,242,233,236,
236,233, 99,128, 4,230,243,237,225,236,108,128,247,246,239,244,
226,229,236,239,119,128, 30,204,103, 2, 20,158, 20,170,239,238,
229,235,243,237,225,236,108,128,246,251,242,225,246,101,129, 0,
210, 20,179,243,237,225,236,108,128,247,242,104, 4, 20,197, 20,
208, 20,212, 21, 34,225,242,237,229,238,233,225,110,128, 5, 85,
109,128, 33, 38,111, 2, 20,218, 20,228,239,235,225,226,239,246,
101,128, 30,206,242,110,133, 1,160, 20,243, 20,251, 21, 6, 21,
14, 21, 26,225,227,245,244,101,128, 30,218,228,239,244,226,229,
236,239,119,128, 30,226,231,242,225,246,101,128, 30,220,232,239,
239,235,225,226,239,246,101,128, 30,222,244,233,236,228,101,128,
30,224,245,238,231,225,242,245,237,236,225,245,116,128, 1, 80,
105,129, 1,162, 21, 54,238,246,229,242,244,229,228,226,242,229,
246,101,128, 2, 14,109, 4, 21, 79, 21,107, 21,184, 21,202,225,
227,242,239,110,130, 1, 76, 21, 91, 21, 99,225,227,245,244,101,
128, 30, 82,231,242,225,246,101,128, 30, 80,229,231, 97,132, 33,
38, 21,121, 21,132, 21,140, 21,156,227,249,242,233,236,236,233,
99,128, 4, 96,231,242,229,229,107,128, 3,169,242,239,245,238,
228,227,249,242,233,236,236,233, 99,128, 4,122,116, 2, 21,162,
21,177,233,244,236,239,227,249,242,233,236,236,233, 99,128, 4,
124,239,238,239,115,128, 3,143,233,227,242,239,110,129, 3,159,
21,194,244,239,238,239,115,128, 3,140,239,238,239,243,240,225,
227,101,128,255, 47,238,229,242,239,237,225,110,128, 33, 96,111,
2, 21,229, 21,248,231,239,238,229,107,129, 1,234, 21,239,237,
225,227,242,239,110,128, 1,236,240,229,110,128, 1,134,115, 3,
22, 6, 22, 33, 22, 40,236,225,243,104,130, 0,216, 22, 17, 22,
25,225,227,245,244,101,128, 1,254,243,237,225,236,108,128,247,
248,237,225,236,108,128,247,111,244,242,239,235,229,225,227,245,
244,101,128, 1,254,116, 2, 22, 59, 22, 70,227,249,242,233,236,
236,233, 99,128, 4,126,233,236,228,101,131, 0,213, 22, 83, 22,
91, 22,102,225,227,245,244,101,128, 30, 76,228,233,229,242,229,
243,233,115,128, 30, 78,243,237,225,236,108,128,247,245, 80,136,
0, 80, 22,130, 22,138, 22,147, 22,159, 22,211, 22,227, 22,246,
23, 2,225,227,245,244,101,128, 30, 84,227,233,242,227,236,101,
128, 36,197,228,239,244,225,227,227,229,238,116,128, 30, 86,101,
3, 22,167, 22,178, 22,190,227,249,242,233,236,236,233, 99,128,
4, 31,232,225,242,237,229,238,233,225,110,128, 5, 74,237,233,
228,228,236,229,232,239,239,235,227,249,242,233,236,236,233, 99,
128, 4,166,104, 2, 22,217, 22,221,105,128, 3,166,239,239,107,
128, 1,164,105,129, 3,160, 22,233,247,242,225,242,237,229,238,
233,225,110,128, 5, 83,237,239,238,239,243,240,225,227,101,128,
255, 48,115, 2, 23, 8, 23, 25,105,129, 3,168, 23, 14,227,249,
242,233,236,236,233, 99,128, 4,112,237,225,236,108,128,247,112,
81,131, 0, 81, 23, 42, 23, 51, 23, 63,227,233,242,227,236,101,
128, 36,198,237,239,238,239,243,240,225,227,101,128,255, 49,243,
237,225,236,108,128,247,113, 82,138, 0, 82, 23, 95, 23,119, 23,
166, 23,217, 23,230, 23,240, 23,245, 24, 19, 24, 31, 24, 43, 97,
2, 23,101, 23,112,225,242,237,229,238,233,225,110,128, 5, 76,
227,245,244,101,128, 1, 84, 99, 4, 23,129, 23,136, 23,145, 23,
153,225,242,239,110,128, 1, 88,229,228,233,236,236, 97,128, 1,
86,233,242,227,236,101,128, 36,199,239,237,237,225,225,227,227,
229,238,116,128, 1, 86,100, 2, 23,172, 23,182,226,236,231,242,
225,246,101,128, 2, 16,239,116, 2, 23,189, 23,198,225,227,227,
229,238,116,128, 30, 88,226,229,236,239,119,129, 30, 90, 23,208,
237,225,227,242,239,110,128, 30, 92,229,232,225,242,237,229,238,
233,225,110,128, 5, 80,230,242,225,235,244,245,114,128, 33, 28,
232,111,128, 3,161,233,110, 2, 23,252, 24, 5,231,243,237,225,
236,108,128,246,252,246,229,242,244,229,228,226,242,229,246,101,
128, 2, 18,236,233,238,229,226,229,236,239,119,128, 30, 94,237,
239,238,239,243,240,225,227,101,128,255, 50,243,237,225,236,108,
129,247,114, 24, 53,233,238,246,229,242,244,229,100,129, 2,129,
24, 66,243,245,240,229,242,233,239,114,128, 2,182, 83,139, 0,
83, 24,103, 26, 17, 26, 55, 26,182, 26,221, 26,250, 27, 84, 27,
105, 27,117, 27,135, 27,143, 70, 6, 24,117, 24,209, 24,241, 25,
77, 25,119, 25,221, 48, 9, 24,137, 24,145, 24,153, 24,161, 24,
169, 24,177, 24,185, 24,193, 24,201,177,176,176,176, 48,128, 37,
12,178,176,176,176, 48,128, 37, 20,179,176,176,176, 48,128, 37,
16,180,176,176,176, 48,128, 37, 24,181,176,176,176, 48,128, 37,
60,182,176,176,176, 48,128, 37, 44,183,176,176,176, 48,128, 37,
52,184,176,176,176, 48,128, 37, 28,185,176,176,176, 48,128, 37,
36, 49, 3, 24,217, 24,225, 24,233,176,176,176,176, 48,128, 37,
0,177,176,176,176, 48,128, 37, 2,185,176,176,176, 48,128, 37,
97, 50, 9, 25, 5, 25, 13, 25, 21, 25, 29, 25, 37, 25, 45, 25,
53, 25, 61, 25, 69,176,176,176,176, 48,128, 37, 98,177,176,176,
176, 48,128, 37, 86,178,176,176,176, 48,128, 37, 85,179,176,176,
176, 48,128, 37, 99,180,176,176,176, 48,128, 37, 81,181,176,176,
176, 48,128, 37, 87,182,176,176,176, 48,128, 37, 93,183,176,176,
176, 48,128, 37, 92,184,176,176,176, 48,128, 37, 91, 51, 4, 25,
87, 25, 95, 25,103, 25,111,182,176,176,176, 48,128, 37, 94,183,
176,176,176, 48,128, 37, 95,184,176,176,176, 48,128, 37, 90,185,
176,176,176, 48,128, 37, 84, 52, 10, 25,141, 25,149, 25,157, 25,
165, 25,173, 25,181, 25,189, 25,197, 25,205, 25,213,176,176,176,
176, 48,128, 37,105,177,176,176,176, 48,128, 37,102,178,176,176,
176, 48,128, 37, 96,179,176,176,176, 48,128, 37, 80,180,176,176,
176, 48,128, 37,108,181,176,176,176, 48,128, 37,103,182,176,176,
176, 48,128, 37,104,183,176,176,176, 48,128, 37,100,184,176,176,
176, 48,128, 37,101,185,176,176,176, 48,128, 37, 89, 53, 5, 25,
233, 25,241, 25,249, 26, 1, 26, 9,176,176,176,176, 48,128, 37,
88,177,176,176,176, 48,128, 37, 82,178,176,176,176, 48,128, 37,
83,179,176,176,176, 48,128, 37,107,180,176,176,176, 48,128, 37,
106, 97, 2, 26, 23, 26, 44,227,245,244,101,129, 1, 90, 26, 32,
228,239,244,225,227,227,229,238,116,128, 30,100,237,240,233,231,
242,229,229,107,128, 3,224, 99, 5, 26, 67, 26, 98, 26,107, 26,
147, 26,169,225,242,239,110,130, 1, 96, 26, 78, 26, 90,228,239,
244,225,227,227,229,238,116,128, 30,102,243,237,225,236,108,128,
246,253,229,228,233,236,236, 97,128, 1, 94,232,247, 97,130, 1,
143, 26,117, 26,128,227,249,242,233,236,236,233, 99,128, 4,216,
228,233,229,242,229,243,233,243,227,249,242,233,236,236,233, 99,
128, 4,218,233,242, 99, 2, 26,155, 26,160,236,101,128, 36,200,
245,237,230,236,229,120,128, 1, 92,239,237,237,225,225,227,227,
229,238,116,128, 2, 24,228,239,116, 2, 26,190, 26,199,225,227,
227,229,238,116,128, 30, 96,226,229,236,239,119,129, 30, 98, 26,
209,228,239,244,225,227,227,229,238,116,128, 30,104,101, 2, 26,
227, 26,239,232,225,242,237,229,238,233,225,110,128, 5, 77,246,
229,238,242,239,237,225,110,128, 33,102,104, 5, 27, 6, 27, 34,
27, 48, 27, 59, 27, 72, 97, 2, 27, 12, 27, 23,225,242,237,229,
238,233,225,110,128, 5, 71,227,249,242,233,236,236,233, 99,128,
4, 40,227,232,225,227,249,242,233,236,236,233, 99,128, 4, 41,
229,233,227,239,240,244,233, 99,128, 3,226,232,225,227,249,242,
233,236,236,233, 99,128, 4,186,233,237,225,227,239,240,244,233,
99,128, 3,236,105, 2, 27, 90, 27, 96,231,237, 97,128, 3,163,
248,242,239,237,225,110,128, 33,101,237,239,238,239,243,240,225,
227,101,128,255, 51,239,230,244,243,233,231,238,227,249,242,233,
236,236,233, 99,128, 4, 44,243,237,225,236,108,128,247,115,244,
233,231,237,225,231,242,229,229,107,128, 3,218, 84,141, 0, 84,
27,186, 27,191, 27,197, 28, 7, 28, 32, 28, 96, 28,147, 28,177,
28,189, 28,201, 28,246, 29, 6, 29, 46,225,117,128, 3,164,226,
225,114,128, 1,102, 99, 4, 27,207, 27,214, 27,223, 27,250,225,
242,239,110,128, 1,100,229,228,233,236,236, 97,128, 1, 98,233,
242, 99, 2, 27,231, 27,236,236,101,128, 36,201,245,237,230,236,
229,248,226,229,236,239,119,128, 30,112,239,237,237,225,225,227,
227,229,238,116,128, 1, 98,228,239,116, 2, 28, 15, 28, 24,225,
227,227,229,238,116,128, 30,106,226,229,236,239,119,128, 30,108,
101, 4, 28, 42, 28, 53, 28, 73, 28, 82,227,249,242,233,236,236,
233, 99,128, 4, 34,228,229,243,227,229,238,228,229,242,227,249,
242,233,236,236,233, 99,128, 4,172,238,242,239,237,225,110,128,
33,105,244,243,229,227,249,242,233,236,236,233, 99,128, 4,180,
104, 3, 28,104, 28,110, 28,136,229,244, 97,128, 3,152,111, 2,
28,116, 28,121,239,107,128, 1,172,242,110,129, 0,222, 28,128,
243,237,225,236,108,128,247,254,242,229,229,242,239,237,225,110,
128, 33, 98,105, 2, 28,153, 28,164,236,228,229,243,237,225,236,
108,128,246,254,247,238,225,242,237,229,238,233,225,110,128, 5,
79,236,233,238,229,226,229,236,239,119,128, 30,110,237,239,238,
239,243,240,225,227,101,128,255, 52,111, 2, 28,207, 28,218,225,
242,237,229,238,233,225,110,128, 5, 57,238,101, 3, 28,227, 28,
234, 28,240,230,233,246,101,128, 1,188,243,233,120,128, 1,132,
244,247,111,128, 1,167,242,229,244,242,239,230,236,229,248,232,
239,239,107,128, 1,174,115, 3, 29, 14, 29, 26, 29, 39,229,227,
249,242,233,236,236,233, 99,128, 4, 38,232,229,227,249,242,233,
236,236,233, 99,128, 4, 11,237,225,236,108,128,247,116,119, 2,
29, 52, 29, 64,229,236,246,229,242,239,237,225,110,128, 33,107,
239,242,239,237,225,110,128, 33, 97, 85,142, 0, 85, 29,105, 29,
123, 29,131, 29,198, 30, 69, 30, 87, 30,198, 30,214, 30,226, 31,
21, 31, 30, 31,142, 31,149, 31,219,225,227,245,244,101,129, 0,
218, 29,115,243,237,225,236,108,128,247,250,226,242,229,246,101,
128, 1,108, 99, 3, 29,139, 29,146, 29,188,225,242,239,110,128,
1,211,233,242, 99, 2, 29,154, 29,159,236,101,128, 36,202,245,
237,230,236,229,120,130, 0,219, 29,172, 29,180,226,229,236,239,
119,128, 30,118,243,237,225,236,108,128,247,251,249,242,233,236,
236,233, 99,128, 4, 35,100, 3, 29,206, 29,229, 30, 59,226,108,
2, 29,213, 29,221,225,227,245,244,101,128, 1,112,231,242,225,
246,101,128, 2, 20,233,229,242,229,243,233,115,134, 0,220, 29,
251, 30, 3, 30, 11, 30, 34, 30, 42, 30, 51,225,227,245,244,101,
128, 1,215,226,229,236,239,119,128, 30,114, 99, 2, 30, 17, 30,
24,225,242,239,110,128, 1,217,249,242,233,236,236,233, 99,128,
4,240,231,242,225,246,101,128, 1,219,237,225,227,242,239,110,
128, 1,213,243,237,225,236,108,128,247,252,239,244,226,229,236,
239,119,128, 30,228,231,242,225,246,101,129, 0,217, 30, 79,243,
237,225,236,108,128,247,249,104, 2, 30, 93, 30,171,111, 2, 30,
99, 30,109,239,235,225,226,239,246,101,128, 30,230,242,110,133,
1,175, 30,124, 30,132, 30,143, 30,151, 30,163,225,227,245,244,
101,128, 30,232,228,239,244,226,229,236,239,119,128, 30,240,231,
242,225,246,101,128, 30,234,232,239,239,235,225,226,239,246,101,
128, 30,236,244,233,236,228,101,128, 30,238,245,238,231,225,242,
245,237,236,225,245,116,129, 1,112, 30,187,227,249,242,233,236,
236,233, 99,128, 4,242,233,238,246,229,242,244,229,228,226,242,
229,246,101,128, 2, 22,235,227,249,242,233,236,236,233, 99,128,
4,120,109, 2, 30,232, 31, 10,225,227,242,239,110,130, 1,106,
30,244, 30,255,227,249,242,233,236,236,233, 99,128, 4,238,228,
233,229,242,229,243,233,115,128, 30,122,239,238,239,243,240,225,
227,101,128,255, 53,239,231,239,238,229,107,128, 1,114,240,243,
233,236,239,110,133, 3,165, 31, 49, 31, 53, 31, 90, 31,121, 31,
134, 49,128, 3,210, 97, 2, 31, 59, 31, 81,227,245,244,229,232,
239,239,235,243,249,237,226,239,236,231,242,229,229,107,128, 3,
211,230,242,233,227,225,110,128, 1,177,228,233,229,242,229,243,
233,115,129, 3,171, 31,103,232,239,239,235,243,249,237,226,239,
236,231,242,229,229,107,128, 3,212,232,239,239,235,243,249,237,
226,239,108,128, 3,210,244,239,238,239,115,128, 3,142,242,233,
238,103,128, 1,110,115, 3, 31,157, 31,172, 31,179,232,239,242,
244,227,249,242,233,236,236,233, 99,128, 4, 14,237,225,236,108,
128,247,117,244,242,225,233,231,232,116, 2, 31,191, 31,202,227,
249,242,233,236,236,233, 99,128, 4,174,243,244,242,239,235,229,
227,249,242,233,236,236,233, 99,128, 4,176,244,233,236,228,101,
130, 1,104, 31,231, 31,239,225,227,245,244,101,128, 30,120,226,
229,236,239,119,128, 30,116, 86,136, 0, 86, 32, 11, 32, 20, 32,
31, 32, 60, 32, 67, 32, 79, 32, 91, 32, 99,227,233,242,227,236,
101,128, 36,203,228,239,244,226,229,236,239,119,128, 30,126,101,
2, 32, 37, 32, 48,227,249,242,233,236,236,233, 99,128, 4, 18,
247,225,242,237,229,238,233,225,110,128, 5, 78,232,239,239,107,
128, 1,178,237,239,238,239,243,240,225,227,101,128,255, 54,239,
225,242,237,229,238,233,225,110,128, 5, 72,243,237,225,236,108,
128,247,118,244,233,236,228,101,128, 30,124, 87,134, 0, 87, 32,
123, 32,131, 32,154, 32,194, 32,202, 32,214,225,227,245,244,101,
128, 30,130,227,233,242, 99, 2, 32,140, 32,145,236,101,128, 36,
204,245,237,230,236,229,120,128, 1,116,100, 2, 32,160, 32,170,
233,229,242,229,243,233,115,128, 30,132,239,116, 2, 32,177, 32,
186,225,227,227,229,238,116,128, 30,134,226,229,236,239,119,128,
30,136,231,242,225,246,101,128, 30,128,237,239,238,239,243,240,
225,227,101,128,255, 55,243,237,225,236,108,128,247,119, 88,134,
0, 88, 32,238, 32,247, 33, 18, 33, 31, 33, 35, 33, 47,227,233,
242,227,236,101,128, 36,205,100, 2, 32,253, 33, 7,233,229,242,
229,243,233,115,128, 30,140,239,244,225,227,227,229,238,116,128,
30,138,229,232,225,242,237,229,238,233,225,110,128, 5, 61,105,
128, 3,158,237,239,238,239,243,240,225,227,101,128,255, 56,243,
237,225,236,108,128,247,120, 89,139, 0, 89, 33, 81, 33,116, 33,
139, 33,189, 33,228, 33,236, 33,253, 34, 40, 34, 52, 34, 60, 34,
68, 97, 2, 33, 87, 33,104,227,245,244,101,129, 0,221, 33, 96,
243,237,225,236,108,128,247,253,244,227,249,242,233,236,236,233,
99,128, 4, 98,227,233,242, 99, 2, 33,125, 33,130,236,101,128,
36,206,245,237,230,236,229,120,128, 1,118,100, 2, 33,145, 33,
165,233,229,242,229,243,233,115,129, 1,120, 33,157,243,237,225,
236,108,128,247,255,239,116, 2, 33,172, 33,181,225,227,227,229,
238,116,128, 30,142,226,229,236,239,119,128, 30,244,229,114, 2,
33,196, 33,208,233,227,249,242,233,236,236,233, 99,128, 4, 43,
245,228,233,229,242,229,243,233,243,227,249,242,233,236,236,233,
99,128, 4,248,231,242,225,246,101,128, 30,242,232,239,239,107,
129, 1,179, 33,245,225,226,239,246,101,128, 30,246,105, 3, 34,
5, 34, 16, 34, 27,225,242,237,229,238,233,225,110,128, 5, 69,
227,249,242,233,236,236,233, 99,128, 4, 7,247,238,225,242,237,
229,238,233,225,110,128, 5, 82,237,239,238,239,243,240,225,227,
101,128,255, 57,243,237,225,236,108,128,247,121,244,233,236,228,
101,128, 30,248,245,115, 2, 34, 75, 34,113,226,233,103, 2, 34,
83, 34, 94,227,249,242,233,236,236,233, 99,128, 4,106,233,239,
244,233,230,233,229,228,227,249,242,233,236,236,233, 99,128, 4,
108,236,233,244,244,236,101, 2, 34,124, 34,135,227,249,242,233,
236,236,233, 99,128, 4,102,233,239,244,233,230,233,229,228,227,
249,242,233,236,236,233, 99,128, 4,104, 90,136, 0, 90, 34,174,
34,198, 34,243, 35, 14, 35, 81, 35,173, 35,185, 35,197, 97, 2,
34,180, 34,191,225,242,237,229,238,233,225,110,128, 5, 54,227,
245,244,101,128, 1,121, 99, 2, 34,204, 34,221,225,242,239,110,
129, 1,125, 34,213,243,237,225,236,108,128,246,255,233,242, 99,
2, 34,229, 34,234,236,101,128, 36,207,245,237,230,236,229,120,
128, 30,144,228,239,116,130, 1,123, 34,253, 35, 6,225,227,227,
229,238,116,128, 1,123,226,229,236,239,119,128, 30,146,101, 3,
35, 22, 35, 33, 35, 76,227,249,242,233,236,236,233, 99,128, 4,
23,100, 2, 35, 39, 35, 58,229,243,227,229,238,228,229,242,227,
249,242,233,236,236,233, 99,128, 4,152,233,229,242,229,243,233,
243,227,249,242,233,236,236,233, 99,128, 4,222,244, 97,128, 3,
150,232,101, 4, 35, 92, 35,103, 35,119, 35,130,225,242,237,229,
238,233,225,110,128, 5, 58,226,242,229,246,229,227,249,242,233,
236,236,233, 99,128, 4,193,227,249,242,233,236,236,233, 99,128,
4, 22,100, 2, 35,136, 35,155,229,243,227,229,238,228,229,242,
227,249,242,233,236,236,233, 99,128, 4,150,233,229,242,229,243,
233,243,227,249,242,233,236,236,233, 99,128, 4,220,236,233,238,
229,226,229,236,239,119,128, 30,148,237,239,238,239,243,240,225,
227,101,128,255, 58,115, 2, 35,203, 35,210,237,225,236,108,128,
247,122,244,242,239,235,101,128, 1,181, 97,158, 0, 97, 36, 26,
38,154, 39, 4, 39, 68, 39,132, 39,196, 40, 4, 40, 68, 40,126,
40,190, 41, 70, 41,217, 42,137, 42,237, 43, 17, 49,192, 49,229,
50, 0, 50,225, 51, 7, 52, 96, 52,168, 53,123, 53,132, 54, 5,
56, 13, 57, 3, 57, 50, 57,201, 57,215, 49,138, 39, 1, 36, 50,
36,114, 36,154, 36,218, 37, 26, 37, 90, 37,154, 37,218, 38, 26,
38, 90, 48,138, 39, 33, 36, 74, 36, 78, 36, 82, 36, 86, 36, 90,
36, 94, 36, 98, 36,102, 36,106, 36,110, 48,128, 39, 94, 49,128,
39, 97, 50,128, 39, 98, 51,128, 39, 99, 52,128, 39,100, 53,128,
39, 16, 54,128, 39,101, 55,128, 39,102, 56,128, 39,103, 57,128,
38, 96, 49,134, 38, 27, 36,130, 36,134, 36,138, 36,142, 36,146,
36,150, 48,128, 38,101, 49,128, 38,102, 50,128, 38, 99, 55,128,
39, 9, 56,128, 39, 8, 57,128, 39, 7, 50,138, 38, 30, 36,178,
36,182, 36,186, 36,190, 36,194, 36,198, 36,202, 36,206, 36,210,
36,214, 48,128, 36, 96, 49,128, 36, 97, 50,128, 36, 98, 51,128,
36, 99, 52,128, 36,100, 53,128, 36,101, 54,128, 36,102, 55,128,
36,103, 56,128, 36,104, 57,128, 36,105, 51,138, 39, 12, 36,242,
36,246, 36,250, 36,254, 37, 2, 37, 6, 37, 10, 37, 14, 37, 18,
37, 22, 48,128, 39,118, 49,128, 39,119, 50,128, 39,120, 51,128,
39,121, 52,128, 39,122, 53,128, 39,123, 54,128, 39,124, 55,128,
39,125, 56,128, 39,126, 57,128, 39,127, 52,138, 39, 13, 37, 50,
37, 54, 37, 58, 37, 62, 37, 66, 37, 70, 37, 74, 37, 78, 37, 82,
37, 86, 48,128, 39,128, 49,128, 39,129, 50,128, 39,130, 51,128,
39,131, 52,128, 39,132, 53,128, 39,133, 54,128, 39,134, 55,128,
39,135, 56,128, 39,136, 57,128, 39,137, 53,138, 39, 14, 37,114,
37,118, 37,122, 37,126, 37,130, 37,134, 37,138, 37,142, 37,146,
37,150, 48,128, 39,138, 49,128, 39,139, 50,128, 39,140, 51,128,
39,141, 52,128, 39,142, 53,128, 39,143, 54,128, 39,144, 55,128,
39,145, 56,128, 39,146, 57,128, 39,147, 54,138, 39, 15, 37,178,
37,182, 37,186, 37,190, 37,194, 37,198, 37,202, 37,206, 37,210,
37,214, 48,128, 39,148, 49,128, 33,146, 50,128, 39,163, 51,128,
33,148, 52,128, 33,149, 53,128, 39,153, 54,128, 39,155, 55,128,
39,156, 56,128, 39,157, 57,128, 39,158, 55,138, 39, 17, 37,242,
37,246, 37,250, 37,254, 38, 2, 38, 6, 38, 10, 38, 14, 38, 18,
38, 22, 48,128, 39,159, 49,128, 39,160, 50,128, 39,161, 51,128,
39,162, 52,128, 39,164, 53,128, 39,165, 54,128, 39,166, 55,128,
39,167, 56,128, 39,168, 57,128, 39,169, 56,138, 39, 18, 38, 50,
38, 54, 38, 58, 38, 62, 38, 66, 38, 70, 38, 74, 38, 78, 38, 82,
38, 86, 48,128, 39,171, 49,128, 39,173, 50,128, 39,175, 51,128,
39,178, 52,128, 39,179, 53,128, 39,181, 54,128, 39,184, 55,128,
39,186, 56,128, 39,187, 57,128, 39,188, 57,138, 39, 19, 38,114,
38,118, 38,122, 38,126, 38,130, 38,134, 38,138, 38,142, 38,146,
38,150, 48,128, 39,189, 49,128, 39,190, 50,128, 39,154, 51,128,
39,170, 52,128, 39,182, 53,128, 39,185, 54,128, 39,152, 55,128,
39,180, 56,128, 39,183, 57,128, 39,172, 50,138, 39, 2, 38,178,
38,224, 38,228, 38,232, 38,236, 38,240, 38,244, 38,248, 38,252,
39, 0, 48,135, 39, 20, 38,196, 38,200, 38,204, 38,208, 38,212,
38,216, 38,220, 48,128, 39,174, 49,128, 39,177, 50,128, 39, 3,
51,128, 39, 80, 52,128, 39, 82, 53,128, 39,110, 54,128, 39,112,
49,128, 39, 21, 50,128, 39, 22, 51,128, 39, 23, 52,128, 39, 24,
53,128, 39, 25, 54,128, 39, 26, 55,128, 39, 27, 56,128, 39, 28,
57,128, 39, 34, 51,138, 39, 4, 39, 28, 39, 32, 39, 36, 39, 40,
39, 44, 39, 48, 39, 52, 39, 56, 39, 60, 39, 64, 48,128, 39, 35,
49,128, 39, 36, 50,128, 39, 37, 51,128, 39, 38, 52,128, 39, 39,
53,128, 38, 5, 54,128, 39, 41, 55,128, 39, 42, 56,128, 39, 43,
57,128, 39, 44, 52,138, 38, 14, 39, 92, 39, 96, 39,100, 39,104,
39,108, 39,112, 39,116, 39,120, 39,124, 39,128, 48,128, 39, 45,
49,128, 39, 46, 50,128, 39, 47, 51,128, 39, 48, 52,128, 39, 49,
53,128, 39, 50, 54,128, 39, 51, 55,128, 39, 52, 56,128, 39, 53,
57,128, 39, 54, 53,138, 39, 6, 39,156, 39,160, 39,164, 39,168,
39,172, 39,176, 39,180, 39,184, 39,188, 39,192, 48,128, 39, 55,
49,128, 39, 56, 50,128, 39, 57, 51,128, 39, 58, 52,128, 39, 59,
53,128, 39, 60, 54,128, 39, 61, 55,128, 39, 62, 56,128, 39, 63,
57,128, 39, 64, 54,138, 39, 29, 39,220, 39,224, 39,228, 39,232,
39,236, 39,240, 39,244, 39,248, 39,252, 40, 0, 48,128, 39, 65,
49,128, 39, 66, 50,128, 39, 67, 51,128, 39, 68, 52,128, 39, 69,
53,128, 39, 70, 54,128, 39, 71, 55,128, 39, 72, 56,128, 39, 73,
57,128, 39, 74, 55,138, 39, 30, 40, 28, 40, 32, 40, 36, 40, 40,
40, 44, 40, 48, 40, 52, 40, 56, 40, 60, 40, 64, 48,128, 39, 75,
49,128, 37,207, 50,128, 39, 77, 51,128, 37,160, 52,128, 39, 79,
53,128, 39, 81, 54,128, 37,178, 55,128, 37,188, 56,128, 37,198,
57,128, 39, 86, 56,137, 39, 31, 40, 90, 40, 94, 40, 98, 40,102,
40,106, 40,110, 40,114, 40,118, 40,122, 49,128, 37,215, 50,128,
39, 88, 51,128, 39, 89, 52,128, 39, 90, 53,128, 39,111, 54,128,
39,113, 55,128, 39,114, 56,128, 39,115, 57,128, 39,104, 57,138,
39, 32, 40,150, 40,154, 40,158, 40,162, 40,166, 40,170, 40,174,
40,178, 40,182, 40,186, 48,128, 39,105, 49,128, 39,108, 50,128,
39,109, 51,128, 39,106, 52,128, 39,107, 53,128, 39,116, 54,128,
39,117, 55,128, 39, 91, 56,128, 39, 92, 57,128, 39, 93, 97, 7,
40,206, 40,216, 40,223, 40,230, 40,255, 41, 15, 41, 26,226,229,
238,231,225,236,105,128, 9,134,227,245,244,101,128, 0,225,228,
229,246, 97,128, 9, 6,231,117, 2, 40,237, 40,246,234,225,242,
225,244,105,128, 10,134,242,237,245,235,232,105,128, 10, 6,237,
225,244,242,225,231,245,242,237,245,235,232,105,128, 10, 62,242,
245,243,241,245,225,242,101,128, 51, 3,246,239,247,229,236,243,
233,231,110, 3, 41, 42, 41, 52, 41, 59,226,229,238,231,225,236,
105,128, 9,190,228,229,246, 97,128, 9, 62,231,245,234,225,242,
225,244,105,128, 10,190, 98, 4, 41, 80, 41,121, 41,130, 41,140,
226,242,229,246,233,225,244,233,239,110, 2, 41, 95, 41,110,237,
225,242,235,225,242,237,229,238,233,225,110,128, 5, 95,243,233,
231,238,228,229,246, 97,128, 9,112,229,238,231,225,236,105,128,
9,133,239,240,239,237,239,230,111,128, 49, 26,242,229,246,101,
134, 1, 3, 41,159, 41,167, 41,178, 41,189, 41,197, 41,209,225,
227,245,244,101,128, 30,175,227,249,242,233,236,236,233, 99,128,
4,209,228,239,244,226,229,236,239,119,128, 30,183,231,242,225,
246,101,128, 30,177,232,239,239,235,225,226,239,246,101,128, 30,
179,244,233,236,228,101,128, 30,181, 99, 4, 41,227, 41,234, 42,
57, 42,127,225,242,239,110,128, 1,206,233,242, 99, 2, 41,242,
41,247,236,101,128, 36,208,245,237,230,236,229,120,133, 0,226,
42, 10, 42, 18, 42, 29, 42, 37, 42, 49,225,227,245,244,101,128,
30,165,228,239,244,226,229,236,239,119,128, 30,173,231,242,225,
246,101,128, 30,167,232,239,239,235,225,226,239,246,101,128, 30,
169,244,233,236,228,101,128, 30,171,245,244,101,133, 0,180, 42,
73, 42, 84, 42,101, 42,108, 42,117,226,229,236,239,247,227,237,
98,128, 3, 23, 99, 2, 42, 90, 42, 95,237, 98,128, 3, 1,239,
237, 98,128, 3, 1,228,229,246, 97,128, 9, 84,236,239,247,237,
239,100,128, 2,207,244,239,238,229,227,237, 98,128, 3, 65,249,
242,233,236,236,233, 99,128, 4, 48,100, 5, 42,149, 42,159, 42,
173, 42,179, 42,213,226,236,231,242,225,246,101,128, 2, 1,228,
225,235,231,245,242,237,245,235,232,105,128, 10,113,229,246, 97,
128, 9, 5,233,229,242,229,243,233,115,130, 0,228, 42,193, 42,
204,227,249,242,233,236,236,233, 99,128, 4,211,237,225,227,242,
239,110,128, 1,223,239,116, 2, 42,220, 42,228,226,229,236,239,
119,128, 30,161,237,225,227,242,239,110,128, 1,225,101,131, 0,
230, 42,247, 42,255, 43, 8,225,227,245,244,101,128, 1,253,235,
239,242,229,225,110,128, 49, 80,237,225,227,242,239,110,128, 1,
227,230,233,105, 6, 43, 33, 43, 53, 45,246, 45,252, 46, 11, 49,
111, 48, 2, 43, 39, 43, 46,176,178,176, 56,128, 32, 21,184,185,
180, 49,128, 32,164,177, 48, 3, 43, 62, 45, 86, 45,221, 48, 9,
43, 82, 43,102, 43,164, 43,226, 44, 32, 44, 94, 44,156, 44,218,
45, 24, 49, 3, 43, 90, 43, 94, 43, 98, 55,128, 4, 16, 56,128,
4, 17, 57,128, 4, 18, 50, 10, 43,124, 43,128, 43,132, 43,136,
43,140, 43,144, 43,148, 43,152, 43,156, 43,160, 48,128, 4, 19,
49,128, 4, 20, 50,128, 4, 21, 51,128, 4, 1, 52,128, 4, 22,
53,128, 4, 23, 54,128, 4, 24, 55,128, 4, 25, 56,128, 4, 26,
57,128, 4, 27, 51, 10, 43,186, 43,190, 43,194, 43,198, 43,202,
43,206, 43,210, 43,214, 43,218, 43,222, 48,128, 4, 28, 49,128,
4, 29, 50,128, 4, 30, 51,128, 4, 31, 52,128, 4, 32, 53,128,
4, 33, 54,128, 4, 34, 55,128, 4, 35, 56,128, 4, 36, 57,128,
4, 37, 52, 10, 43,248, 43,252, 44, 0, 44, 4, 44, 8, 44, 12,
44, 16, 44, 20, 44, 24, 44, 28, 48,128, 4, 38, 49,128, 4, 39,
50,128, 4, 40, 51,128, 4, 41, 52,128, 4, 42, 53,128, 4, 43,
54,128, 4, 44, 55,128, 4, 45, 56,128, 4, 46, 57,128, 4, 47,
53, 10, 44, 54, 44, 58, 44, 62, 44, 66, 44, 70, 44, 74, 44, 78,
44, 82, 44, 86, 44, 90, 48,128, 4,144, 49,128, 4, 2, 50,128,
4, 3, 51,128, 4, 4, 52,128, 4, 5, 53,128, 4, 6, 54,128,
4, 7, 55,128, 4, 8, 56,128, 4, 9, 57,128, 4, 10, 54, 10,
44,116, 44,120, 44,124, 44,128, 44,132, 44,136, 44,140, 44,144,
44,148, 44,152, 48,128, 4, 11, 49,128, 4, 12, 50,128, 4, 14,
51,128,246,196, 52,128,246,197, 53,128, 4, 48, 54,128, 4, 49,
55,128, 4, 50, 56,128, 4, 51, 57,128, 4, 52, 55, 10, 44,178,
44,182, 44,186, 44,190, 44,194, 44,198, 44,202, 44,206, 44,210,
44,214, 48,128, 4, 53, 49,128, 4, 81, 50,128, 4, 54, 51,128,
4, 55, 52,128, 4, 56, 53,128, 4, 57, 54,128, 4, 58, 55,128,
4, 59, 56,128, 4, 60, 57,128, 4, 61, 56, 10, 44,240, 44,244,
44,248, 44,252, 45, 0, 45, 4, 45, 8, 45, 12, 45, 16, 45, 20,
48,128, 4, 62, 49,128, 4, 63, 50,128, 4, 64, 51,128, 4, 65,
52,128, 4, 66, 53,128, 4, 67, 54,128, 4, 68, 55,128, 4, 69,
56,128, 4, 70, 57,128, 4, 71, 57, 10, 45, 46, 45, 50, 45, 54,
45, 58, 45, 62, 45, 66, 45, 70, 45, 74, 45, 78, 45, 82, 48,128,
4, 72, 49,128, 4, 73, 50,128, 4, 74, 51,128, 4, 75, 52,128,
4, 76, 53,128, 4, 77, 54,128, 4, 78, 55,128, 4, 79, 56,128,
4,145, 57,128, 4, 82, 49, 4, 45, 96, 45,158, 45,163, 45,189,
48, 10, 45,118, 45,122, 45,126, 45,130, 45,134, 45,138, 45,142,
45,146, 45,150, 45,154, 48,128, 4, 83, 49,128, 4, 84, 50,128,
4, 85, 51,128, 4, 86, 52,128, 4, 87, 53,128, 4, 88, 54,128,
4, 89, 55,128, 4, 90, 56,128, 4, 91, 57,128, 4, 92,177, 48,
128, 4, 94, 52, 4, 45,173, 45,177, 45,181, 45,185, 53,128, 4,
15, 54,128, 4, 98, 55,128, 4,114, 56,128, 4,116, 57, 5, 45,
201, 45,205, 45,209, 45,213, 45,217, 50,128,246,198, 51,128, 4,
95, 52,128, 4, 99, 53,128, 4,115, 54,128, 4,117, 56, 2, 45,
227, 45,241, 51, 2, 45,233, 45,237, 49,128,246,199, 50,128,246,
200,180, 54,128, 4,217,178,185, 57,128, 32, 14,179, 48, 2, 46,
3, 46, 7, 48,128, 32, 15, 49,128, 32, 13,181, 55, 7, 46, 28,
46, 98, 47,163, 47,240, 48,197, 49, 34, 49,105, 51, 2, 46, 34,
46, 48, 56, 2, 46, 40, 46, 44, 49,128, 6,106, 56,128, 6, 12,
57, 8, 46, 66, 46, 70, 46, 74, 46, 78, 46, 82, 46, 86, 46, 90,
46, 94, 50,128, 6, 96, 51,128, 6, 97, 52,128, 6, 98, 53,128,
6, 99, 54,128, 6,100, 55,128, 6,101, 56,128, 6,102, 57,128,
6,103, 52, 7, 46,114, 46,146, 46,208, 47, 14, 47, 46, 47,102,
47,158, 48, 5, 46,126, 46,130, 46,134, 46,138, 46,142, 48,128,
6,104, 49,128, 6,105, 51,128, 6, 27, 55,128, 6, 31, 57,128,
6, 33, 49, 10, 46,168, 46,172, 46,176, 46,180, 46,184, 46,188,
46,192, 46,196, 46,200, 46,204, 48,128, 6, 34, 49,128, 6, 35,
50,128, 6, 36, 51,128, 6, 37, 52,128, 6, 38, 53,128, 6, 39,
54,128, 6, 40, 55,128, 6, 41, 56,128, 6, 42, 57,128, 6, 43,
50, 10, 46,230, 46,234, 46,238, 46,242, 46,246, 46,250, 46,254,
47, 2, 47, 6, 47, 10, 48,128, 6, 44, 49,128, 6, 45, 50,128,
6, 46, 51,128, 6, 47, 52,128, 6, 48, 53,128, 6, 49, 54,128,
6, 50, 55,128, 6, 51, 56,128, 6, 52, 57,128, 6, 53, 51, 5,
47, 26, 47, 30, 47, 34, 47, 38, 47, 42, 48,128, 6, 54, 49,128,
6, 55, 50,128, 6, 56, 51,128, 6, 57, 52,128, 6, 58, 52, 9,
47, 66, 47, 70, 47, 74, 47, 78, 47, 82, 47, 86, 47, 90, 47, 94,
47, 98, 48,128, 6, 64, 49,128, 6, 65, 50,128, 6, 66, 51,128,
6, 67, 52,128, 6, 68, 53,128, 6, 69, 54,128, 6, 70, 56,128,
6, 72, 57,128, 6, 73, 53, 9, 47,122, 47,126, 47,130, 47,134,
47,138, 47,142, 47,146, 47,150, 47,154, 48,128, 6, 74, 49,128,
6, 75, 50,128, 6, 76, 51,128, 6, 77, 52,128, 6, 78, 53,128,
6, 79, 54,128, 6, 80, 55,128, 6, 81, 56,128, 6, 82,183, 48,
128, 6, 71, 53, 3, 47,171, 47,203, 47,235, 48, 5, 47,183, 47,
187, 47,191, 47,195, 47,199, 53,128, 6,164, 54,128, 6,126, 55,
128, 6,134, 56,128, 6,152, 57,128, 6,175, 49, 5, 47,215, 47,
219, 47,223, 47,227, 47,231, 49,128, 6,121, 50,128, 6,136, 51,
128, 6,145, 52,128, 6,186, 57,128, 6,210,179, 52,128, 6,213,
54, 7, 48, 0, 48, 5, 48, 10, 48, 15, 48, 53, 48,115, 48,177,
179, 54,128, 32,170,180, 53,128, 5,190,181, 56,128, 5,195, 54,
6, 48, 29, 48, 33, 48, 37, 48, 41, 48, 45, 48, 49, 52,128, 5,
208, 53,128, 5,209, 54,128, 5,210, 55,128, 5,211, 56,128, 5,
212, 57,128, 5,213, 55, 10, 48, 75, 48, 79, 48, 83, 48, 87, 48,
91, 48, 95, 48, 99, 48,103, 48,107, 48,111, 48,128, 5,214, 49,
128, 5,215, 50,128, 5,216, 51,128, 5,217, 52,128, 5,218, 53,
128, 5,219, 54,128, 5,220, 55,128, 5,221, 56,128, 5,222, 57,
128, 5,223, 56, 10, 48,137, 48,141, 48,145, 48,149, 48,153, 48,
157, 48,161, 48,165, 48,169, 48,173, 48,128, 5,224, 49,128, 5,
225, 50,128, 5,226, 51,128, 5,227, 52,128, 5,228, 53,128, 5,
229, 54,128, 5,230, 55,128, 5,231, 56,128, 5,232, 57,128, 5,
233, 57, 3, 48,185, 48,189, 48,193, 48,128, 5,234, 52,128,251,
42, 53,128,251, 43, 55, 4, 48,207, 48,221, 48,241, 48,246, 48,
2, 48,213, 48,217, 48,128,251, 75, 53,128,251, 31, 49, 3, 48,
229, 48,233, 48,237, 54,128, 5,240, 55,128, 5,241, 56,128, 5,
242,178, 51,128,251, 53, 57, 7, 49, 6, 49, 10, 49, 14, 49, 18,
49, 22, 49, 26, 49, 30, 51,128, 5,180, 52,128, 5,181, 53,128,
5,182, 54,128, 5,187, 55,128, 5,184, 56,128, 5,183, 57,128,
5,176, 56, 3, 49, 42, 49, 86, 49, 91, 48, 7, 49, 58, 49, 62,
49, 66, 49, 70, 49, 74, 49, 78, 49, 82, 48,128, 5,178, 49,128,
5,177, 50,128, 5,179, 51,128, 5,194, 52,128, 5,193, 54,128,
5,185, 55,128, 5,188,179, 57,128, 5,189, 52, 2, 49, 97, 49,
101, 49,128, 5,191, 50,128, 5,192,185,178, 57,128, 2,188, 54,
3, 49,119, 49,178, 49,185, 49, 4, 49,129, 49,145, 49,151, 49,
172, 50, 2, 49,135, 49,140,180, 56,128, 33, 5,184, 57,128, 33,
19,179,181, 50,128, 33, 22,181, 55, 3, 49,160, 49,164, 49,168,
51,128, 32, 44, 52,128, 32, 45, 53,128, 32, 46,182,182, 52,128,
32, 12,179,177,182, 55,128, 6,109,180,185,179, 55,128, 2,189,
103, 2, 49,198, 49,205,242,225,246,101,128, 0,224,117, 2, 49,
211, 49,220,234,225,242,225,244,105,128, 10,133,242,237,245,235,
232,105,128, 10, 5,104, 2, 49,235, 49,245,233,242,225,231,225,
238, 97,128, 48, 66,239,239,235,225,226,239,246,101,128, 30,163,
105, 7, 50, 16, 50, 41, 50, 48, 50, 60, 50, 85, 50,101, 50,181,
98, 2, 50, 22, 50, 31,229,238,231,225,236,105,128, 9,144,239,
240,239,237,239,230,111,128, 49, 30,228,229,246, 97,128, 9, 16,
229,227,249,242,233,236,236,233, 99,128, 4,213,231,117, 2, 50,
67, 50, 76,234,225,242,225,244,105,128, 10,144,242,237,245,235,
232,105,128, 10, 16,237,225,244,242,225,231,245,242,237,245,235,
232,105,128, 10, 72,110, 5, 50,113, 50,122, 50,136, 50,152, 50,
167,225,242,225,226,233, 99,128, 6, 57,230,233,238,225,236,225,
242,225,226,233, 99,128,254,202,233,238,233,244,233,225,236,225,
242,225,226,233, 99,128,254,203,237,229,228,233,225,236,225,242,
225,226,233, 99,128,254,204,246,229,242,244,229,228,226,242,229,
246,101,128, 2, 3,246,239,247,229,236,243,233,231,110, 3, 50,
197, 50,207, 50,214,226,229,238,231,225,236,105,128, 9,200,228,
229,246, 97,128, 9, 72,231,245,234,225,242,225,244,105,128, 10,
200,107, 2, 50,231, 50,255,225,244,225,235,225,238, 97,129, 48,
162, 50,243,232,225,236,230,247,233,228,244,104,128,255,113,239,
242,229,225,110,128, 49, 79,108, 3, 51, 15, 52, 71, 52, 80,101,
2, 51, 21, 52, 66,102,136, 5,208, 51, 41, 51, 50, 51, 65, 51,
79, 51,168, 51,182, 52, 37, 52, 51,225,242,225,226,233, 99,128,
6, 39,228,225,231,229,243,232,232,229,226,242,229,119,128,251,
48,230,233,238,225,236,225,242,225,226,233, 99,128,254,142,104,
2, 51, 85, 51,160,225,237,250, 97, 2, 51, 94, 51,127,225,226,
239,246,101, 2, 51,104, 51,113,225,242,225,226,233, 99,128, 6,
35,230,233,238,225,236,225,242,225,226,233, 99,128,254,132,226,
229,236,239,119, 2, 51,137, 51,146,225,242,225,226,233, 99,128,
6, 37,230,233,238,225,236,225,242,225,226,233, 99,128,254,136,
229,226,242,229,119,128, 5,208,236,225,237,229,228,232,229,226,
242,229,119,128,251, 79,237, 97, 2, 51,189, 51,225,228,228,225,
225,226,239,246,101, 2, 51,202, 51,211,225,242,225,226,233, 99,
128, 6, 34,230,233,238,225,236,225,242,225,226,233, 99,128,254,
130,235,243,245,242, 97, 4, 51,239, 51,248, 52, 6, 52, 22,225,
242,225,226,233, 99,128, 6, 73,230,233,238,225,236,225,242,225,
226,233, 99,128,254,240,233,238,233,244,233,225,236,225,242,225,
226,233, 99,128,254,243,237,229,228,233,225,236,225,242,225,226,
233, 99,128,254,244,240,225,244,225,232,232,229,226,242,229,119,
128,251, 46,241,225,237,225,244,243,232,229,226,242,229,119,128,
251, 47,240,104,128, 33, 53,236,229,241,245,225,108,128, 34, 76,
240,232, 97,129, 3,177, 52, 88,244,239,238,239,115,128, 3,172,
109, 4, 52,106, 52,114, 52,125, 52,159,225,227,242,239,110,128,
1, 1,239,238,239,243,240,225,227,101,128,255, 65,240,229,242,
243,225,238,100,130, 0, 38, 52,139, 52,151,237,239,238,239,243,
240,225,227,101,128,255, 6,243,237,225,236,108,128,247, 38,243,
241,245,225,242,101,128, 51,194,110, 4, 52,178, 52,189, 53, 55,
53, 65,226,239,240,239,237,239,230,111,128, 49, 34,103, 4, 52,
199, 52,210, 52,224, 53, 47,226,239,240,239,237,239,230,111,128,
49, 36,235,232,225,238,235,232,245,244,232,225,105,128, 14, 90,
236,101,131, 34, 32, 52,235, 53, 32, 53, 39,226,242,225,227,235,
229,116, 2, 52,247, 53, 11,236,229,230,116,129, 48, 8, 53, 0,
246,229,242,244,233,227,225,108,128,254, 63,242,233,231,232,116,
129, 48, 9, 53, 21,246,229,242,244,233,227,225,108,128,254, 64,
236,229,230,116,128, 35, 41,242,233,231,232,116,128, 35, 42,243,
244,242,239,109,128, 33, 43,239,244,229,236,229,233, 97,128, 3,
135,117, 2, 53, 71, 53, 83,228,225,244,244,225,228,229,246, 97,
128, 9, 82,243,246,225,242, 97, 3, 53, 95, 53,105, 53,112,226,
229,238,231,225,236,105,128, 9,130,228,229,246, 97,128, 9, 2,
231,245,234,225,242,225,244,105,128, 10,130,239,231,239,238,229,
107,128, 1, 5,112, 3, 53,140, 53,164, 53,194, 97, 2, 53,146,
53,158,225,244,239,243,241,245,225,242,101,128, 51, 0,242,229,
110,128, 36,156,239,243,244,242,239,240,232,101, 2, 53,177, 53,
188,225,242,237,229,238,233,225,110,128, 5, 90,237,239,100,128,
2,188,112, 2, 53,200, 53,205,236,101,128,248,255,242,111, 2,
53,212, 53,220,225,227,232,229,115,128, 34, 80,120, 2, 53,226,
53,246,229,241,245,225,108,129, 34, 72, 53,236,239,242,233,237,
225,231,101,128, 34, 82,233,237,225,244,229,236,249,229,241,245,
225,108,128, 34, 69,114, 4, 54, 15, 54, 42, 54, 46, 54, 91,225,
229, 97, 2, 54, 23, 54, 33,229,235,239,242,229,225,110,128, 49,
142,235,239,242,229,225,110,128, 49,141, 99,128, 35, 18,105, 2,
54, 52, 54, 66,231,232,244,232,225,236,230,242,233,238,103,128,
30,154,238,103,130, 0,229, 54, 75, 54, 83,225,227,245,244,101,
128, 1,251,226,229,236,239,119,128, 30, 1,242,239,119, 8, 54,
111, 54,118, 54,247, 55, 57, 55,107, 55,162, 55,185, 56, 4,226,
239,244,104,128, 33,148,100, 3, 54,126, 54,165, 54,212,225,243,
104, 4, 54,138, 54,145, 54,152, 54,160,228,239,247,110,128, 33,
227,236,229,230,116,128, 33,224,242,233,231,232,116,128, 33,226,
245,112,128, 33,225,226,108, 5, 54,178, 54,185, 54,192, 54,199,
54,207,226,239,244,104,128, 33,212,228,239,247,110,128, 33,211,
236,229,230,116,128, 33,208,242,233,231,232,116,128, 33,210,245,
112,128, 33,209,239,247,110,131, 33,147, 54,224, 54,231, 54,239,
236,229,230,116,128, 33,153,242,233,231,232,116,128, 33,152,247,
232,233,244,101,128, 33,233,104, 2, 54,253, 55, 48,229,225,100,
4, 55, 9, 55, 19, 55, 29, 55, 40,228,239,247,238,237,239,100,
128, 2,197,236,229,230,244,237,239,100,128, 2,194,242,233,231,
232,244,237,239,100,128, 2,195,245,240,237,239,100,128, 2,196,
239,242,233,250,229,120,128,248,231,236,229,230,116,131, 33,144,
55, 70, 55, 87, 55, 99,228,226,108,129, 33,208, 55, 78,243,244,
242,239,235,101,128, 33,205,239,246,229,242,242,233,231,232,116,
128, 33,198,247,232,233,244,101,128, 33,230,242,233,231,232,116,
132, 33,146, 55,123, 55,135, 55,143, 55,154,228,226,236,243,244,
242,239,235,101,128, 33,207,232,229,225,246,121,128, 39,158,239,
246,229,242,236,229,230,116,128, 33,196,247,232,233,244,101,128,
33,232,244,225, 98, 2, 55,170, 55,177,236,229,230,116,128, 33,
228,242,233,231,232,116,128, 33,229,245,112,132, 33,145, 55,198,
55,226, 55,244, 55,252,100, 2, 55,204, 55,216,110,129, 33,149,
55,210,226,243,101,128, 33,168,239,247,238,226,225,243,101,128,
33,168,236,229,230,116,129, 33,150, 55,235,239,230,228,239,247,
110,128, 33,197,242,233,231,232,116,128, 33,151,247,232,233,244,
101,128, 33,231,246,229,242,244,229,120,128,248,230,115, 5, 56,
25, 56,101, 56,146, 56,229, 56,239, 99, 2, 56, 31, 56, 83,233,
105, 2, 56, 38, 56, 61,227,233,242,227,245,109,129, 0, 94, 56,
49,237,239,238,239,243,240,225,227,101,128,255, 62,244,233,236,
228,101,129, 0,126, 56, 71,237,239,238,239,243,240,225,227,101,
128,255, 94,242,233,240,116,129, 2, 81, 56, 92,244,245,242,238,
229,100,128, 2, 82,237,225,236,108, 2, 56,110, 56,121,232,233,
242,225,231,225,238, 97,128, 48, 65,235,225,244,225,235,225,238,
97,129, 48,161, 56,134,232,225,236,230,247,233,228,244,104,128,
255,103,244,229,242,233,115, 2, 56,156, 56,225,107,131, 0, 42,
56,166, 56,194, 56,217, 97, 2, 56,172, 56,186,236,244,239,238,
229,225,242,225,226,233, 99,128, 6,109,242,225,226,233, 99,128,
6,109,109, 2, 56,200, 56,206,225,244,104,128, 34, 23,239,238,
239,243,240,225,227,101,128,255, 10,243,237,225,236,108,128,254,
97,109,128, 32, 66,245,240,229,242,233,239,114,128,246,233,249,
237,240,244,239,244,233,227,225,236,236,249,229,241,245,225,108,
128, 34, 67,116,132, 0, 64, 57, 15, 57, 22, 57, 34, 57, 42,233,
236,228,101,128, 0,227,237,239,238,239,243,240,225,227,101,128,
255, 32,243,237,225,236,108,128,254,107,245,242,238,229,100,128,
2, 80,117, 6, 57, 64, 57, 89, 57, 96, 57,121, 57,141, 57,157,
98, 2, 57, 70, 57, 79,229,238,231,225,236,105,128, 9,148,239,
240,239,237,239,230,111,128, 49, 32,228,229,246, 97,128, 9, 20,
231,117, 2, 57,103, 57,112,234,225,242,225,244,105,128, 10,148,
242,237,245,235,232,105,128, 10, 20,236,229,238,231,244,232,237,
225,242,235,226,229,238,231,225,236,105,128, 9,215,237,225,244,
242,225,231,245,242,237,245,235,232,105,128, 10, 76,246,239,247,
229,236,243,233,231,110, 3, 57,173, 57,183, 57,190,226,229,238,
231,225,236,105,128, 9,204,228,229,246, 97,128, 9, 76,231,245,
234,225,242,225,244,105,128, 10,204,246,225,231,242,225,232,225,
228,229,246, 97,128, 9, 61,121, 2, 57,221, 57,233,226,225,242,
237,229,238,233,225,110,128, 5, 97,233,110,130, 5,226, 57,242,
58, 1,225,236,244,239,238,229,232,229,226,242,229,119,128,251,
32,232,229,226,242,229,119,128, 5,226, 98,144, 0, 98, 58, 46,
58,181, 58,192, 58,201, 58,226, 60, 11, 60, 73, 60,146, 62, 72,
62, 84, 62,127, 62,135, 62,145, 64, 15, 64, 39, 64, 48, 97, 7,
58, 62, 58, 72, 58, 96, 58,103, 58,128, 58,152, 58,163,226,229,
238,231,225,236,105,128, 9,172,227,235,243,236,225,243,104,129,
0, 92, 58, 84,237,239,238,239,243,240,225,227,101,128,255, 60,
228,229,246, 97,128, 9, 44,231,117, 2, 58,110, 58,119,234,225,
242,225,244,105,128, 10,172,242,237,245,235,232,105,128, 10, 44,
104, 2, 58,134, 58,144,233,242,225,231,225,238, 97,128, 48,112,
244,244,232,225,105,128, 14, 63,235,225,244,225,235,225,238, 97,
128, 48,208,114,129, 0,124, 58,169,237,239,238,239,243,240,225,
227,101,128,255, 92,226,239,240,239,237,239,230,111,128, 49, 5,
227,233,242,227,236,101,128, 36,209,228,239,116, 2, 58,209, 58,
218,225,227,227,229,238,116,128, 30, 3,226,229,236,239,119,128,
30, 5,101, 6, 58,240, 59, 5, 59, 28, 59,170, 59,181, 59,193,
225,237,229,228,243,233,248,244,229,229,238,244,232,238,239,244,
229,115,128, 38,108, 99, 2, 59, 11, 59, 18,225,245,243,101,128,
34, 53,249,242,233,236,236,233, 99,128, 4, 49,104, 5, 59, 40,
59, 49, 59, 63, 59, 93, 59,152,225,242,225,226,233, 99,128, 6,
40,230,233,238,225,236,225,242,225,226,233, 99,128,254,144,105,
2, 59, 69, 59, 84,238,233,244,233,225,236,225,242,225,226,233,
99,128,254,145,242,225,231,225,238, 97,128, 48,121,237,101, 2,
59,100, 59,113,228,233,225,236,225,242,225,226,233, 99,128,254,
146,229,237,105, 2, 59,121, 59,136,238,233,244,233,225,236,225,
242,225,226,233, 99,128,252,159,243,239,236,225,244,229,228,225,
242,225,226,233, 99,128,252, 8,238,239,239,238,230,233,238,225,
236,225,242,225,226,233, 99,128,252,109,235,225,244,225,235,225,
238, 97,128, 48,217,238,225,242,237,229,238,233,225,110,128, 5,
98,116,132, 5,209, 59,205, 59,225, 59,245, 59,254, 97,129, 3,
178, 59,211,243,249,237,226,239,236,231,242,229,229,107,128, 3,
208,228,225,231,229,243,104,129,251, 49, 59,236,232,229,226,242,
229,119,128,251, 49,232,229,226,242,229,119,128, 5,209,242,225,
230,229,232,229,226,242,229,119,128,251, 76,104, 2, 60, 17, 60,
67, 97, 3, 60, 25, 60, 35, 60, 42,226,229,238,231,225,236,105,
128, 9,173,228,229,246, 97,128, 9, 45,231,117, 2, 60, 49, 60,
58,234,225,242,225,244,105,128, 10,173,242,237,245,235,232,105,
128, 10, 45,239,239,107,128, 2, 83,105, 5, 60, 85, 60, 96, 60,
107, 60,121, 60,135,232,233,242,225,231,225,238, 97,128, 48,115,
235,225,244,225,235,225,238, 97,128, 48,211,236,225,226,233,225,
236,227,236,233,227,107,128, 2,152,238,228,233,231,245,242,237,
245,235,232,105,128, 10, 2,242,245,243,241,245,225,242,101,128,
51, 49,108, 3, 60,154, 62, 55, 62, 66, 97, 2, 60,160, 62, 50,
227,107, 6, 60,175, 60,184, 60,221, 61,114, 61,169, 61,221,227,
233,242,227,236,101,128, 37,207,100, 2, 60,190, 60,199,233,225,
237,239,238,100,128, 37,198,239,247,238,240,239,233,238,244,233,
238,231,244,242,233,225,238,231,236,101,128, 37,188,108, 2, 60,
227, 61, 74,101, 2, 60,233, 61, 13,230,244,240,239,233,238,244,
233,238,103, 2, 60,248, 61, 2,240,239,233,238,244,229,114,128,
37,196,244,242,233,225,238,231,236,101,128, 37,192,238,244,233,
227,245,236,225,242,226,242,225,227,235,229,116, 2, 61, 33, 61,
53,236,229,230,116,129, 48, 16, 61, 42,246,229,242,244,233,227,
225,108,128,254, 59,242,233,231,232,116,129, 48, 17, 61, 63,246,
229,242,244,233,227,225,108,128,254, 60,239,247,229,114, 2, 61,
83, 61, 98,236,229,230,244,244,242,233,225,238,231,236,101,128,
37,227,242,233,231,232,244,244,242,233,225,238,231,236,101,128,
37,226,114, 2, 61,120, 61,131,229,227,244,225,238,231,236,101,
128, 37,172,233,231,232,244,240,239,233,238,244,233,238,103, 2,
61,148, 61,158,240,239,233,238,244,229,114,128, 37,186,244,242,
233,225,238,231,236,101,128, 37,182,115, 3, 61,177, 61,207, 61,
215,109, 2, 61,183, 61,195,225,236,236,243,241,245,225,242,101,
128, 37,170,233,236,233,238,231,230,225,227,101,128, 38, 59,241,
245,225,242,101,128, 37,160,244,225,114,128, 38, 5,245,240,112,
2, 61,229, 62, 11,229,114, 2, 61,236, 61,251,236,229,230,244,
244,242,233,225,238,231,236,101,128, 37,228,242,233,231,232,244,
244,242,233,225,238,231,236,101,128, 37,229,239,233,238,244,233,
238,103, 2, 62, 23, 62, 39,243,237,225,236,236,244,242,233,225,
238,231,236,101,128, 37,180,244,242,233,225,238,231,236,101,128,
37,178,238,107,128, 36, 35,233,238,229,226,229,236,239,119,128,
30, 7,239,227,107,128, 37,136,237,239,238,239,243,240,225,227,
101,128,255, 66,111, 3, 62, 92, 62,105, 62,116,226,225,233,237,
225,233,244,232,225,105,128, 14, 26,232,233,242,225,231,225,238,
97,128, 48,124,235,225,244,225,235,225,238, 97,128, 48,220,240,
225,242,229,110,128, 36,157,241,243,241,245,225,242,101,128, 51,
195,114, 4, 62,155, 63,149, 63,222, 64, 5,225, 99, 2, 62,162,
63, 56,101, 3, 62,170, 62,175, 62,243,229,120,128,248,244,236,
229,230,116,133, 0,123, 62,192, 62,197, 62,219, 62,227, 62,232,
226,116,128,248,243,109, 2, 62,203, 62,208,233,100,128,248,242,
239,238,239,243,240,225,227,101,128,255, 91,243,237,225,236,108,
128,254, 91,244,112,128,248,241,246,229,242,244,233,227,225,108,
128,254, 55,242,233,231,232,116,133, 0,125, 63, 5, 63, 10, 63,
32, 63, 40, 63, 45,226,116,128,248,254,109, 2, 63, 16, 63, 21,
233,100,128,248,253,239,238,239,243,240,225,227,101,128,255, 93,
243,237,225,236,108,128,254, 92,244,112,128,248,252,246,229,242,
244,233,227,225,108,128,254, 56,235,229,116, 2, 63, 64, 63,106,
236,229,230,116,132, 0, 91, 63, 79, 63, 84, 63, 89, 63,101,226,
116,128,248,240,229,120,128,248,239,237,239,238,239,243,240,225,
227,101,128,255, 59,244,112,128,248,238,242,233,231,232,116,132,
0, 93, 63,122, 63,127, 63,132, 63,144,226,116,128,248,251,229,
120,128,248,250,237,239,238,239,243,240,225,227,101,128,255, 61,
244,112,128,248,249,229,246,101,131, 2,216, 63,161, 63,172, 63,
178,226,229,236,239,247,227,237, 98,128, 3, 46,227,237, 98,128,
3, 6,233,238,246,229,242,244,229,100, 3, 63,193, 63,204, 63,
210,226,229,236,239,247,227,237, 98,128, 3, 47,227,237, 98,128,
3, 17,228,239,245,226,236,229,227,237, 98,128, 3, 97,233,228,
231,101, 2, 63,231, 63,242,226,229,236,239,247,227,237, 98,128,
3, 42,233,238,246,229,242,244,229,228,226,229,236,239,247,227,
237, 98,128, 3, 58,239,235,229,238,226,225,114,128, 0,166,115,
2, 64, 21, 64, 29,244,242,239,235,101,128, 1,128,245,240,229,
242,233,239,114,128,246,234,244,239,240,226,225,114,128, 1,131,
117, 3, 64, 56, 64, 67, 64, 78,232,233,242,225,231,225,238, 97,
128, 48,118,235,225,244,225,235,225,238, 97,128, 48,214,236,108,
2, 64, 85, 64,115,229,116,130, 32, 34, 64, 94, 64,104,233,238,
246,229,242,243,101,128, 37,216,239,240,229,242,225,244,239,114,
128, 34, 25,243,229,249,101,128, 37,206, 99,143, 0, 99, 64,156,
65,105, 65,116, 65,180, 65,211, 66, 48, 67,215, 68,199, 69, 43,
69, 92, 72, 84, 72, 92, 72,102, 72,114, 72,147, 97, 9, 64,176,
64,187, 64,197, 64,204, 64,211, 64,236, 64,246, 65, 42, 65, 51,
225,242,237,229,238,233,225,110,128, 5,110,226,229,238,231,225,
236,105,128, 9,154,227,245,244,101,128, 1, 7,228,229,246, 97,
128, 9, 26,231,117, 2, 64,218, 64,227,234,225,242,225,244,105,
128, 10,154,242,237,245,235,232,105,128, 10, 26,236,243,241,245,
225,242,101,128, 51,136,238,228,242,225,226,233,238,228,117, 4,
65, 8, 65, 18, 65, 24, 65, 31,226,229,238,231,225,236,105,128,
9,129,227,237, 98,128, 3, 16,228,229,246, 97,128, 9, 1,231,
245,234,225,242,225,244,105,128, 10,129,240,243,236,239,227,107,
128, 33,234,114, 3, 65, 59, 65, 65, 65, 91,229,239,102,128, 33,
5,239,110,130, 2,199, 65, 74, 65, 85,226,229,236,239,247,227,
237, 98,128, 3, 44,227,237, 98,128, 3, 12,242,233,225,231,229,
242,229,244,245,242,110,128, 33,181,226,239,240,239,237,239,230,
111,128, 49, 24, 99, 4, 65,126, 65,133, 65,152, 65,174,225,242,
239,110,128, 1, 13,229,228,233,236,236, 97,129, 0,231, 65,144,
225,227,245,244,101,128, 30, 9,233,242, 99, 2, 65,160, 65,165,
236,101,128, 36,210,245,237,230,236,229,120,128, 1, 9,245,242,
108,128, 2, 85,100, 2, 65,186, 65,202,239,116,129, 1, 11, 65,
193,225,227,227,229,238,116,128, 1, 11,243,241,245,225,242,101,
128, 51,197,101, 2, 65,217, 65,233,228,233,236,236, 97,129, 0,
184, 65,227,227,237, 98,128, 3, 39,238,116,132, 0,162, 65,246,
66, 14, 66, 26, 66, 37,105, 2, 65,252, 66, 4,231,242,225,228,
101,128, 33, 3,238,230,229,242,233,239,114,128,246,223,237,239,
238,239,243,240,225,227,101,128,255,224,239,236,228,243,244,249,
236,101,128,247,162,243,245,240,229,242,233,239,114,128,246,224,
104, 5, 66, 60, 66,123, 66,134, 67, 62, 67,154, 97, 4, 66, 70,
66, 81, 66, 91, 66, 98,225,242,237,229,238,233,225,110,128, 5,
121,226,229,238,231,225,236,105,128, 9,155,228,229,246, 97,128,
9, 27,231,117, 2, 66,105, 66,114,234,225,242,225,244,105,128,
10,155,242,237,245,235,232,105,128, 10, 27,226,239,240,239,237,
239,230,111,128, 49, 20,101, 6, 66,148, 66,168, 66,192, 67, 4,
67, 16, 67, 37,225,226,235,232,225,243,233,225,238,227,249,242,
233,236,236,233, 99,128, 4,189, 99, 2, 66,174, 66,182,235,237,
225,242,107,128, 39, 19,249,242,233,236,236,233, 99,128, 4, 71,
100, 2, 66,198, 66,242,229,243,227,229,238,228,229,114, 2, 66,
211, 66,231,225,226,235,232,225,243,233,225,238,227,249,242,233,
236,236,233, 99,128, 4,191,227,249,242,233,236,236,233, 99,128,
4,183,233,229,242,229,243,233,243,227,249,242,233,236,236,233,
99,128, 4,245,232,225,242,237,229,238,233,225,110,128, 5,115,
235,232,225,235,225,243,243,233,225,238,227,249,242,233,236,236,
233, 99,128, 4,204,246,229,242,244,233,227,225,236,243,244,242,
239,235,229,227,249,242,233,236,236,233, 99,128, 4,185,105,129,
3,199, 67, 68,229,245,227,104, 4, 67, 81, 67,116, 67,131, 67,
140, 97, 2, 67, 87, 67,102,227,233,242,227,236,229,235,239,242,
229,225,110,128, 50,119,240,225,242,229,238,235,239,242,229,225,
110,128, 50, 23,227,233,242,227,236,229,235,239,242,229,225,110,
128, 50,105,235,239,242,229,225,110,128, 49, 74,240,225,242,229,
238,235,239,242,229,225,110,128, 50, 9,111, 2, 67,160, 67,210,
227,104, 3, 67,169, 67,191, 67,201,225,110, 2, 67,176, 67,184,
231,244,232,225,105,128, 14, 10,244,232,225,105,128, 14, 8,233,
238,231,244,232,225,105,128, 14, 9,239,229,244,232,225,105,128,
14, 12,239,107,128, 1,136,105, 2, 67,221, 68, 67,229,245, 99,
5, 67,235, 68, 14, 68, 29, 68, 38, 68, 52, 97, 2, 67,241, 68,
0,227,233,242,227,236,229,235,239,242,229,225,110,128, 50,118,
240,225,242,229,238,235,239,242,229,225,110,128, 50, 22,227,233,
242,227,236,229,235,239,242,229,225,110,128, 50,104,235,239,242,
229,225,110,128, 49, 72,240,225,242,229,238,235,239,242,229,225,
110,128, 50, 8,245,240,225,242,229,238,235,239,242,229,225,110,
128, 50, 28,242, 99, 2, 68, 74, 68,169,236,101,132, 37,203, 68,
87, 68, 98, 68,103, 68,127,237,245,236,244,233,240,236,121,128,
34,151,239,116,128, 34,153,112, 2, 68,109, 68,115,236,245,115,
128, 34,149,239,243,244,225,236,237,225,242,107,128, 48, 54,247,
233,244,104, 2, 68,136, 68,152,236,229,230,244,232,225,236,230,
226,236,225,227,107,128, 37,208,242,233,231,232,244,232,225,236,
230,226,236,225,227,107,128, 37,209,245,237,230,236,229,120,130,
2,198, 68,182, 68,193,226,229,236,239,247,227,237, 98,128, 3,
45,227,237, 98,128, 3, 2,108, 3, 68,207, 68,213, 69, 11,229,
225,114,128, 35, 39,233,227,107, 4, 68,225, 68,236, 68,245, 68,
255,225,236,246,229,239,236,225,114,128, 1,194,228,229,238,244,
225,108,128, 1,192,236,225,244,229,242,225,108,128, 1,193,242,
229,244,242,239,230,236,229,120,128, 1,195,245, 98,129, 38, 99,
69, 18,243,245,233,116, 2, 69, 27, 69, 35,226,236,225,227,107,
128, 38, 99,247,232,233,244,101,128, 38,103,109, 3, 69, 51, 69,
65, 69, 76,227,245,226,229,228,243,241,245,225,242,101,128, 51,
164,239,238,239,243,240,225,227,101,128,255, 67,243,241,245,225,
242,229,228,243,241,245,225,242,101,128, 51,160,111, 8, 69,110,
69,121, 69,208, 70,150, 71,179, 71,210, 72, 61, 72, 70,225,242,
237,229,238,233,225,110,128, 5,129,236,239,110,131, 0, 58, 69,
133, 69,158, 69,177,237,239,110, 2, 69,141, 69,149,229,244,225,
242,121,128, 32,161,239,243,240,225,227,101,128,255, 26,115, 2,
69,164, 69,170,233,231,110,128, 32,161,237,225,236,108,128,254,
85,244,242,233,225,238,231,245,236,225,114, 2, 69,192, 69,202,
232,225,236,230,237,239,100,128, 2,209,237,239,100,128, 2,208,
109, 2, 69,214, 70,143,237, 97,134, 0, 44, 69,231, 70, 39, 70,
50, 70, 62, 70, 92, 70,115, 97, 3, 69,239, 70, 9, 70, 17,226,
239,246,101, 2, 69,248, 69,254,227,237, 98,128, 3, 19,242,233,
231,232,244,227,237, 98,128, 3, 21,227,227,229,238,116,128,246,
195,114, 2, 70, 23, 70, 30,225,226,233, 99,128, 6, 12,237,229,
238,233,225,110,128, 5, 93,233,238,230,229,242,233,239,114,128,
246,225,237,239,238,239,243,240,225,227,101,128,255, 12,242,229,
246,229,242,243,229,100, 2, 70, 75, 70, 86,225,226,239,246,229,
227,237, 98,128, 3, 20,237,239,100,128, 2,189,115, 2, 70, 98,
70,105,237,225,236,108,128,254, 80,245,240,229,242,233,239,114,
128,246,226,244,245,242,238,229,100, 2, 70,126, 70,137,225,226,
239,246,229,227,237, 98,128, 3, 18,237,239,100,128, 2,187,240,
225,243,115,128, 38, 60,110, 2, 70,156, 70,165,231,242,245,229,
238,116,128, 34, 69,116, 2, 70,171, 70,185,239,245,242,233,238,
244,229,231,242,225,108,128, 34, 46,242,239,108,142, 35, 3, 70,
219, 70,225, 70,240, 70,255, 71, 43, 71, 88, 71,102, 71,107, 71,
112, 71,117, 71,123, 71,128, 71,169, 71,174,193,195, 75,128, 0,
6, 66, 2, 70,231, 70,236,197, 76,128, 0, 7, 83,128, 0, 8,
67, 2, 70,246, 70,251,193, 78,128, 0, 24, 82,128, 0, 13, 68,
3, 71, 7, 71, 33, 71, 38, 67, 4, 71, 17, 71, 21, 71, 25, 71,
29, 49,128, 0, 17, 50,128, 0, 18, 51,128, 0, 19, 52,128, 0,
20,197, 76,128, 0,127,204, 69,128, 0, 16, 69, 5, 71, 55, 71,
59, 71, 64, 71, 69, 71, 74, 77,128, 0, 25,206, 81,128, 0, 5,
207, 84,128, 0, 4,211, 67,128, 0, 27, 84, 2, 71, 80, 71, 84,
66,128, 0, 23, 88,128, 0, 3, 70, 2, 71, 94, 71, 98, 70,128,
0, 12, 83,128, 0, 28,199, 83,128, 0, 29,200, 84,128, 0, 9,
204, 70,128, 0, 10,206,193, 75,128, 0, 21,210, 83,128, 0, 30,
83, 5, 71,140, 71,144, 71,154, 71,159, 71,164, 73,128, 0, 15,
79,129, 0, 14, 71,150, 84,128, 0, 2,212, 88,128, 0, 1,213,
66,128, 0, 26,217, 78,128, 0, 22,213, 83,128, 0, 31,214, 84,
128, 0, 11,240,249,242,233,231,232,116,129, 0,169, 71,191,115,
2, 71,197, 71,203,225,238,115,128,248,233,229,242,233,102,128,
246,217,114, 2, 71,216, 72, 44,238,229,242,226,242,225,227,235,
229,116, 2, 71,231, 72, 9,236,229,230,116,130, 48, 12, 71,242,
71,254,232,225,236,230,247,233,228,244,104,128,255, 98,246,229,
242,244,233,227,225,108,128,254, 65,242,233,231,232,116,130, 48,
13, 72, 21, 72, 33,232,225,236,230,247,233,228,244,104,128,255,
99,246,229,242,244,233,227,225,108,128,254, 66,240,239,242,225,
244,233,239,238,243,241,245,225,242,101,128, 51,127,243,241,245,
225,242,101,128, 51,199,246,229,242,235,231,243,241,245,225,242,
101,128, 51,198,240,225,242,229,110,128, 36,158,242,245,250,229,
233,242,111,128, 32,162,243,244,242,229,244,227,232,229,100,128,
2,151,245,114, 2, 72,121, 72,139,236,121, 2, 72,128, 72,134,
225,238,100,128, 34,207,239,114,128, 34,206,242,229,238,227,121,
128, 0,164,249,114, 4, 72,158, 72,166, 72,173, 72,181,194,242,
229,246,101,128,246,209,198,236,229,120,128,246,210,226,242,229,
246,101,128,246,212,230,236,229,120,128,246,213,100,146, 0,100,
72,228, 74,110, 75,134, 75,194, 76,114, 77, 68, 77,130, 78, 59,
78, 72, 78, 81, 78,107, 78,132, 78,141, 79,208, 79,216, 79,227,
79,247, 80, 19, 97, 11, 72,252, 73, 7, 73, 17, 73, 89, 73,152,
73,163, 73,174, 73,243, 74, 49, 74, 55, 74, 85,225,242,237,229,
238,233,225,110,128, 5,100,226,229,238,231,225,236,105,128, 9,
166,100, 5, 73, 29, 73, 38, 73, 44, 73, 58, 73, 74,225,242,225,
226,233, 99,128, 6, 54,229,246, 97,128, 9, 38,230,233,238,225,
236,225,242,225,226,233, 99,128,254,190,233,238,233,244,233,225,
236,225,242,225,226,233, 99,128,254,191,237,229,228,233,225,236,
225,242,225,226,233, 99,128,254,192,103, 3, 73, 97, 73,114, 73,
128,229,243,104,129, 5,188, 73,105,232,229,226,242,229,119,128,
5,188,231,229,114,129, 32, 32, 73,122,228,226,108,128, 32, 33,
117, 2, 73,134, 73,143,234,225,242,225,244,105,128, 10,166,242,
237,245,235,232,105,128, 10, 38,232,233,242,225,231,225,238, 97,
128, 48, 96,235,225,244,225,235,225,238, 97,128, 48,192,108, 3,
73,182, 73,191, 73,229,225,242,225,226,233, 99,128, 6, 47,229,
116,130, 5,211, 73,200, 73,220,228,225,231,229,243,104,129,251,
51, 73,211,232,229,226,242,229,119,128,251, 51,232,229,226,242,
229,119,128, 5,211,230,233,238,225,236,225,242,225,226,233, 99,
128,254,170,237,237, 97, 3, 73,253, 74, 6, 74, 18,225,242,225,
226,233, 99,128, 6, 79,236,239,247,225,242,225,226,233, 99,128,
6, 79,244,225,238, 97, 2, 74, 27, 74, 41,236,244,239,238,229,
225,242,225,226,233, 99,128, 6, 76,242,225,226,233, 99,128, 6,
76,238,228, 97,128, 9,100,242,231, 97, 2, 74, 63, 74, 72,232,
229,226,242,229,119,128, 5,167,236,229,230,244,232,229,226,242,
229,119,128, 5,167,243,233,225,240,238,229,245,237,225,244,225,
227,249,242,233,236,236,233,227,227,237, 98,128, 4,133, 98, 3,
74,118, 75,115, 75,125,108, 9, 74,138, 74,146, 75, 3, 75, 11,
75, 27, 75, 38, 75, 56, 75, 70, 75, 81,199,242,225,246,101,128,
246,211, 97, 2, 74,152, 74,209,238,231,236,229,226,242,225,227,
235,229,116, 2, 74,168, 74,188,236,229,230,116,129, 48, 10, 74,
177,246,229,242,244,233,227,225,108,128,254, 61,242,233,231,232,
116,129, 48, 11, 74,198,246,229,242,244,233,227,225,108,128,254,
62,114, 2, 74,215, 74,236,227,232,233,238,246,229,242,244,229,
228,226,229,236,239,247,227,237, 98,128, 3, 43,242,239,119, 2,
74,244, 74,251,236,229,230,116,128, 33,212,242,233,231,232,116,
128, 33,210,228,225,238,228, 97,128, 9,101,231,242,225,246,101,
129,246,214, 75, 21,227,237, 98,128, 3, 15,233,238,244,229,231,
242,225,108,128, 34, 44,236,239,247,236,233,238,101,129, 32, 23,
75, 50,227,237, 98,128, 3, 51,239,246,229,242,236,233,238,229,
227,237, 98,128, 3, 63,240,242,233,237,229,237,239,100,128, 2,
186,246,229,242,244,233,227,225,108, 2, 75, 94, 75,100,226,225,
114,128, 32, 22,236,233,238,229,225,226,239,246,229,227,237, 98,
128, 3, 14,239,240,239,237,239,230,111,128, 49, 9,243,241,245,
225,242,101,128, 51,200, 99, 4, 75,144, 75,151, 75,160, 75,187,
225,242,239,110,128, 1, 15,229,228,233,236,236, 97,128, 30, 17,
233,242, 99, 2, 75,168, 75,173,236,101,128, 36,211,245,237,230,
236,229,248,226,229,236,239,119,128, 30, 19,242,239,225,116,128,
1, 17,100, 4, 75,204, 76, 29, 76, 39, 76, 90, 97, 4, 75,214,
75,224, 75,231, 76, 0,226,229,238,231,225,236,105,128, 9,161,
228,229,246, 97,128, 9, 33,231,117, 2, 75,238, 75,247,234,225,
242,225,244,105,128, 10,161,242,237,245,235,232,105,128, 10, 33,
108, 2, 76, 6, 76, 15,225,242,225,226,233, 99,128, 6,136,230,
233,238,225,236,225,242,225,226,233, 99,128,251,137,228,232,225,
228,229,246, 97,128, 9, 92,232, 97, 3, 76, 48, 76, 58, 76, 65,
226,229,238,231,225,236,105,128, 9,162,228,229,246, 97,128, 9,
34,231,117, 2, 76, 72, 76, 81,234,225,242,225,244,105,128, 10,
162,242,237,245,235,232,105,128, 10, 34,239,116, 2, 76, 97, 76,
106,225,227,227,229,238,116,128, 30, 11,226,229,236,239,119,128,
30, 13,101, 8, 76,132, 76,185, 76,192, 76,217, 76,227, 76,238,
77, 27, 77, 63, 99, 2, 76,138, 76,175,233,237,225,236,243,229,
240,225,242,225,244,239,114, 2, 76,156, 76,165,225,242,225,226,
233, 99,128, 6,107,240,229,242,243,233,225,110,128, 6,107,249,
242,233,236,236,233, 99,128, 4, 52,231,242,229,101,128, 0,176,
232,105, 2, 76,199, 76,208,232,229,226,242,229,119,128, 5,173,
242,225,231,225,238, 97,128, 48,103,233,227,239,240,244,233, 99,
128, 3,239,235,225,244,225,235,225,238, 97,128, 48,199,108, 2,
76,244, 77, 11,229,244,101, 2, 76,252, 77, 3,236,229,230,116,
128, 35, 43,242,233,231,232,116,128, 35, 38,244, 97,129, 3,180,
77, 18,244,245,242,238,229,100,128, 1,141,238,239,237,233,238,
225,244,239,242,237,233,238,245,243,239,238,229,238,245,237,229,
242,225,244,239,242,226,229,238,231,225,236,105,128, 9,248,250,
104,128, 2,164,104, 2, 77, 74, 77,124, 97, 3, 77, 82, 77, 92,
77, 99,226,229,238,231,225,236,105,128, 9,167,228,229,246, 97,
128, 9, 39,231,117, 2, 77,106, 77,115,234,225,242,225,244,105,
128, 10,167,242,237,245,235,232,105,128, 10, 39,239,239,107,128,
2, 87,105, 6, 77,144, 77,193, 77,253, 78, 8, 78, 19, 78, 29,
97, 2, 77,150, 77,172,236,249,244,233,235,225,244,239,238,239,
115,129, 3,133, 77,166,227,237, 98,128, 3, 68,237,239,238,100,
129, 38,102, 77,181,243,245,233,244,247,232,233,244,101,128, 38,
98,229,242,229,243,233,115,133, 0,168, 77,212, 77,220, 77,231,
77,237, 77,245,225,227,245,244,101,128,246,215,226,229,236,239,
247,227,237, 98,128, 3, 36,227,237, 98,128, 3, 8,231,242,225,
246,101,128,246,216,244,239,238,239,115,128, 3,133,232,233,242,
225,231,225,238, 97,128, 48, 98,235,225,244,225,235,225,238, 97,
128, 48,194,244,244,239,237,225,242,107,128, 48, 3,246,105, 2,
78, 36, 78, 47,228,101,129, 0,247, 78, 43,115,128, 34, 35,243,
233,239,238,243,236,225,243,104,128, 34, 21,234,229,227,249,242,
233,236,236,233, 99,128, 4, 82,235,243,232,225,228,101,128, 37,
147,108, 2, 78, 87, 78, 98,233,238,229,226,229,236,239,119,128,
30, 15,243,241,245,225,242,101,128, 51,151,109, 2, 78,113, 78,
121,225,227,242,239,110,128, 1, 17,239,238,239,243,240,225,227,
101,128,255, 68,238,226,236,239,227,107,128, 37,132,111, 10, 78,
163, 78,175, 78,185, 78,196, 78,207, 79, 23, 79, 28, 79, 39, 79,
154, 79,180,227,232,225,228,225,244,232,225,105,128, 14, 14,228,
229,235,244,232,225,105,128, 14, 20,232,233,242,225,231,225,238,
97,128, 48,105,235,225,244,225,235,225,238, 97,128, 48,201,236,
236,225,114,132, 0, 36, 78,222, 78,233, 78,245, 79, 0,233,238,
230,229,242,233,239,114,128,246,227,237,239,238,239,243,240,225,
227,101,128,255, 4,239,236,228,243,244,249,236,101,128,247, 36,
115, 2, 79, 6, 79, 13,237,225,236,108,128,254,105,245,240,229,
242,233,239,114,128,246,228,238,103,128, 32,171,242,245,243,241,
245,225,242,101,128, 51, 38,116, 6, 79, 53, 79, 70, 79, 92, 79,
103, 79,135, 79,142,225,227,227,229,238,116,129, 2,217, 79, 64,
227,237, 98,128, 3, 7,226,229,236,239,247, 99, 2, 79, 81, 79,
86,237, 98,128, 3, 35,239,237, 98,128, 3, 35,235,225,244,225,
235,225,238, 97,128, 48,251,236,229,243,115, 2, 79,112, 79,116,
105,128, 1, 49,106,129,246,190, 79,122,243,244,242,239,235,229,
232,239,239,107,128, 2,132,237,225,244,104,128, 34,197,244,229,
228,227,233,242,227,236,101,128, 37,204,245,226,236,229,249,239,
228,240,225,244,225,104,129,251, 31, 79,171,232,229,226,242,229,
119,128,251, 31,247,238,244,225,227,107, 2, 79,191, 79,202,226,
229,236,239,247,227,237, 98,128, 3, 30,237,239,100,128, 2,213,
240,225,242,229,110,128, 36,159,243,245,240,229,242,233,239,114,
128,246,235,116, 2, 79,233, 79,239,225,233,108,128, 2, 86,239,
240,226,225,114,128, 1,140,117, 2, 79,253, 80, 8,232,233,242,
225,231,225,238, 97,128, 48,101,235,225,244,225,235,225,238, 97,
128, 48,197,122,132, 1,243, 80, 31, 80, 40, 80, 59, 80, 96,225,
236,244,239,238,101,128, 2,163, 99, 2, 80, 46, 80, 53,225,242,
239,110,128, 1,198,245,242,108,128, 2,165,101, 2, 80, 65, 80,
85,225,226,235,232,225,243,233,225,238,227,249,242,233,236,236,
233, 99,128, 4,225,227,249,242,233,236,236,233, 99,128, 4, 85,
232,229,227,249,242,233,236,236,233, 99,128, 4, 95,101,151, 0,
101, 80,159, 80,178, 80,212, 81,186, 81,248, 82, 25, 82, 37, 82,
60, 82,113, 83,225, 84, 27, 84,129, 84,245, 85,124, 85,199, 85,
230, 86, 36, 86, 89, 87, 24, 87,157, 87,177, 87,221, 88, 56, 97,
2, 80,165, 80,172,227,245,244,101,128, 0,233,242,244,104,128,
38, 65, 98, 3, 80,186, 80,195, 80,205,229,238,231,225,236,105,
128, 9,143,239,240,239,237,239,230,111,128, 49, 28,242,229,246,
101,128, 1, 21, 99, 5, 80,224, 81, 41, 81, 55, 81, 87, 81,176,
97, 2, 80,230, 81, 35,238,228,242, 97, 3, 80,241, 80,248, 81,
3,228,229,246, 97,128, 9, 13,231,245,234,225,242,225,244,105,
128, 10,141,246,239,247,229,236,243,233,231,110, 2, 81, 17, 81,
24,228,229,246, 97,128, 9, 69,231,245,234,225,242,225,244,105,
128, 10,197,242,239,110,128, 1, 27,229,228,233,236,236,225,226,
242,229,246,101,128, 30, 29,104, 2, 81, 61, 81, 72,225,242,237,
229,238,233,225,110,128, 5,101,249,233,247,238,225,242,237,229,
238,233,225,110,128, 5,135,233,242, 99, 2, 81, 95, 81,100,236,
101,128, 36,212,245,237,230,236,229,120,134, 0,234, 81,121, 81,
129, 81,137, 81,148, 81,156, 81,168,225,227,245,244,101,128, 30,
191,226,229,236,239,119,128, 30, 25,228,239,244,226,229,236,239,
119,128, 30,199,231,242,225,246,101,128, 30,193,232,239,239,235,
225,226,239,246,101,128, 30,195,244,233,236,228,101,128, 30,197,
249,242,233,236,236,233, 99,128, 4, 84,100, 4, 81,196, 81,206,
81,212, 81,222,226,236,231,242,225,246,101,128, 2, 5,229,246,
97,128, 9, 15,233,229,242,229,243,233,115,128, 0,235,239,116,
130, 1, 23, 81,231, 81,240,225,227,227,229,238,116,128, 1, 23,
226,229,236,239,119,128, 30,185,101, 2, 81,254, 82, 9,231,245,
242,237,245,235,232,105,128, 10, 15,237,225,244,242,225,231,245,
242,237,245,235,232,105,128, 10, 71,230,227,249,242,233,236,236,
233, 99,128, 4, 68,103, 2, 82, 43, 82, 50,242,225,246,101,128,
0,232,245,234,225,242,225,244,105,128, 10,143,104, 4, 82, 70,
82, 81, 82, 92, 82,102,225,242,237,229,238,233,225,110,128, 5,
103,226,239,240,239,237,239,230,111,128, 49, 29,233,242,225,231,
225,238, 97,128, 48, 72,239,239,235,225,226,239,246,101,128, 30,
187,105, 4, 82,123, 82,134, 83,192, 83,207,226,239,240,239,237,
239,230,111,128, 49, 31,231,232,116,142, 0, 56, 82,168, 82,177,
82,187, 82,217, 82,224, 83, 6, 83, 31, 83, 76, 83,110, 83,122,
83,133, 83,166, 83,174, 83,185,225,242,225,226,233, 99,128, 6,
104,226,229,238,231,225,236,105,128, 9,238,227,233,242,227,236,
101,129, 36,103, 82,198,233,238,246,229,242,243,229,243,225,238,
243,243,229,242,233,102,128, 39,145,228,229,246, 97,128, 9,110,
229,229,110, 2, 82,232, 82,241,227,233,242,227,236,101,128, 36,
113,112, 2, 82,247, 82,254,225,242,229,110,128, 36,133,229,242,
233,239,100,128, 36,153,231,117, 2, 83, 13, 83, 22,234,225,242,
225,244,105,128, 10,238,242,237,245,235,232,105,128, 10,110,104,
2, 83, 37, 83, 63, 97, 2, 83, 43, 83, 54,227,235,225,242,225,
226,233, 99,128, 6,104,238,231,250,232,239,117,128, 48, 40,238,
239,244,229,226,229,225,237,229,100,128, 38,107,105, 2, 83, 82,
83,100,228,229,239,231,242,225,240,232,233,227,240,225,242,229,
110,128, 50, 39,238,230,229,242,233,239,114,128, 32,136,237,239,
238,239,243,240,225,227,101,128,255, 24,239,236,228,243,244,249,
236,101,128,247, 56,112, 2, 83,139, 83,146,225,242,229,110,128,
36,123,229,114, 2, 83,153, 83,159,233,239,100,128, 36,143,243,
233,225,110,128, 6,248,242,239,237,225,110,128, 33,119,243,245,
240,229,242,233,239,114,128, 32,120,244,232,225,105,128, 14, 88,
238,246,229,242,244,229,228,226,242,229,246,101,128, 2, 7,239,
244,233,230,233,229,228,227,249,242,233,236,236,233, 99,128, 4,
101,107, 2, 83,231, 83,255,225,244,225,235,225,238, 97,129, 48,
168, 83,243,232,225,236,230,247,233,228,244,104,128,255,116,111,
2, 84, 5, 84, 20,238,235,225,242,231,245,242,237,245,235,232,
105,128, 10,116,242,229,225,110,128, 49, 84,108, 3, 84, 35, 84,
46, 84,107,227,249,242,233,236,236,233, 99,128, 4, 59,101, 2,
84, 52, 84, 59,237,229,238,116,128, 34, 8,246,229,110, 3, 84,
69, 84, 78, 84, 99,227,233,242,227,236,101,128, 36,106,112, 2,
84, 84, 84, 91,225,242,229,110,128, 36,126,229,242,233,239,100,
128, 36,146,242,239,237,225,110,128, 33,122,236,233,240,243,233,
115,129, 32, 38, 84,118,246,229,242,244,233,227,225,108,128, 34,
238,109, 5, 84,141, 84,169, 84,180, 84,200, 84,211,225,227,242,
239,110,130, 1, 19, 84,153, 84,161,225,227,245,244,101,128, 30,
23,231,242,225,246,101,128, 30, 21,227,249,242,233,236,236,233,
99,128, 4, 60,228,225,243,104,129, 32, 20, 84,189,246,229,242,
244,233,227,225,108,128,254, 49,239,238,239,243,240,225,227,101,
128,255, 69,112, 2, 84,217, 84,237,232,225,243,233,243,237,225,
242,235,225,242,237,229,238,233,225,110,128, 5, 91,244,249,243,
229,116,128, 34, 5,110, 6, 85, 3, 85, 14, 85, 25, 85, 69, 85,
101, 85,116,226,239,240,239,237,239,230,111,128, 49, 35,227,249,
242,233,236,236,233, 99,128, 4, 61,100, 2, 85, 31, 85, 50,225,
243,104,129, 32, 19, 85, 39,246,229,242,244,233,227,225,108,128,
254, 50,229,243,227,229,238,228,229,242,227,249,242,233,236,236,
233, 99,128, 4,163,103,130, 1, 75, 85, 77, 85, 88,226,239,240,
239,237,239,230,111,128, 49, 37,232,229,227,249,242,233,236,236,
233, 99,128, 4,165,232,239,239,235,227,249,242,233,236,236,233,
99,128, 4,200,243,240,225,227,101,128, 32, 2,111, 3, 85,132,
85,140, 85,149,231,239,238,229,107,128, 1, 25,235,239,242,229,
225,110,128, 49, 83,240,229,110,130, 2, 91, 85,159, 85,168,227,
236,239,243,229,100,128, 2,154,242,229,246,229,242,243,229,100,
130, 2, 92, 85,183, 85,192,227,236,239,243,229,100,128, 2, 94,
232,239,239,107,128, 2, 93,112, 2, 85,205, 85,212,225,242,229,
110,128, 36,160,243,233,236,239,110,129, 3,181, 85,222,244,239,
238,239,115,128, 3,173,241,117, 2, 85,237, 86, 25,225,108,130,
0, 61, 85,246, 86, 2,237,239,238,239,243,240,225,227,101,128,
255, 29,115, 2, 86, 8, 86, 15,237,225,236,108,128,254,102,245,
240,229,242,233,239,114,128, 32,124,233,246,225,236,229,238,227,
101,128, 34, 97,114, 3, 86, 44, 86, 55, 86, 66,226,239,240,239,
237,239,230,111,128, 49, 38,227,249,242,233,236,236,233, 99,128,
4, 64,229,246,229,242,243,229,100,129, 2, 88, 86, 78,227,249,
242,233,236,236,233, 99,128, 4, 77,115, 6, 86,103, 86,114, 86,
134, 86,215, 87, 4, 87, 14,227,249,242,233,236,236,233, 99,128,
4, 65,228,229,243,227,229,238,228,229,242,227,249,242,233,236,
236,233, 99,128, 4,171,104,132, 2,131, 86,146, 86,153, 86,184,
86,199,227,245,242,108,128, 2,134,239,242,116, 2, 86,161, 86,
168,228,229,246, 97,128, 9, 14,246,239,247,229,236,243,233,231,
238,228,229,246, 97,128, 9, 70,242,229,246,229,242,243,229,228,
236,239,239,112,128, 1,170,243,241,245,225,244,242,229,246,229,
242,243,229,100,128, 2,133,237,225,236,108, 2, 86,224, 86,235,
232,233,242,225,231,225,238, 97,128, 48, 71,235,225,244,225,235,
225,238, 97,129, 48,167, 86,248,232,225,236,230,247,233,228,244,
104,128,255,106,244,233,237,225,244,229,100,128, 33, 46,245,240,
229,242,233,239,114,128,246,236,116, 5, 87, 36, 87, 62, 87, 66,
87, 83, 87,149, 97,130, 3,183, 87, 44, 87, 54,242,237,229,238,
233,225,110,128, 5,104,244,239,238,239,115,128, 3,174,104,128,
0,240,233,236,228,101,129, 30,189, 87, 75,226,229,236,239,119,
128, 30, 27,238,225,232,244, 97, 3, 87, 95, 87,127, 87,136,230,
239,245,235,104, 2, 87,105, 87,114,232,229,226,242,229,119,128,
5,145,236,229,230,244,232,229,226,242,229,119,128, 5,145,232,
229,226,242,229,119,128, 5,145,236,229,230,244,232,229,226,242,
229,119,128, 5,145,245,242,238,229,100,128, 1,221,117, 2, 87,
163, 87,172,235,239,242,229,225,110,128, 49, 97,242,111,128, 32,
172,246,239,247,229,236,243,233,231,110, 3, 87,193, 87,203, 87,
210,226,229,238,231,225,236,105,128, 9,199,228,229,246, 97,128,
9, 71,231,245,234,225,242,225,244,105,128, 10,199,120, 2, 87,
227, 88, 44,227,236,225,109,132, 0, 33, 87,242, 87,253, 88, 24,
88, 36,225,242,237,229,238,233,225,110,128, 5, 92,100, 2, 88,
3, 88, 8,226,108,128, 32, 60,239,247,110,129, 0,161, 88, 16,
243,237,225,236,108,128,247,161,237,239,238,239,243,240,225,227,
101,128,255, 1,243,237,225,236,108,128,247, 33,233,243,244,229,
238,244,233,225,108,128, 34, 3,250,104,131, 2,146, 88, 67, 88,
86, 88, 97, 99, 2, 88, 73, 88, 80,225,242,239,110,128, 1,239,
245,242,108,128, 2,147,242,229,246,229,242,243,229,100,128, 1,
185,244,225,233,108,128, 1,186,102,140, 0,102, 88,132, 88,214,
88,225, 88,234, 88,246, 89, 93, 89,109, 91,117, 91,130, 91,156,
93, 33, 93, 41, 97, 4, 88,142, 88,149, 88,160, 88,171,228,229,
246, 97,128, 9, 94,231,245,242,237,245,235,232,105,128, 10, 94,
232,242,229,238,232,229,233,116,128, 33, 9,244,232, 97, 3, 88,
181, 88,190, 88,202,225,242,225,226,233, 99,128, 6, 78,236,239,
247,225,242,225,226,233, 99,128, 6, 78,244,225,238,225,242,225,
226,233, 99,128, 6, 75,226,239,240,239,237,239,230,111,128, 49,
8,227,233,242,227,236,101,128, 36,213,228,239,244,225,227,227,
229,238,116,128, 30, 31,101, 3, 88,254, 89, 76, 89, 86,104, 4,
89, 8, 89, 31, 89, 45, 89, 61,225,114, 2, 89, 15, 89, 22,225,
226,233, 99,128, 6, 65,237,229,238,233,225,110,128, 5,134,230,
233,238,225,236,225,242,225,226,233, 99,128,254,210,233,238,233,
244,233,225,236,225,242,225,226,233, 99,128,254,211,237,229,228,
233,225,236,225,242,225,226,233, 99,128,254,212,233,227,239,240,
244,233, 99,128, 3,229,237,225,236,101,128, 38, 64,102,130,251,
0, 89,101, 89,105,105,128,251, 3,108,128,251, 4,105,136,251,
1, 89,129, 89,169, 89,180, 89,202, 90, 68, 90, 85, 90, 93, 90,
106,230,244,229,229,110, 2, 89,139, 89,148,227,233,242,227,236,
101,128, 36,110,112, 2, 89,154, 89,161,225,242,229,110,128, 36,
130,229,242,233,239,100,128, 36,150,231,245,242,229,228,225,243,
104,128, 32, 18,236,236,229,100, 2, 89,189, 89,195,226,239,120,
128, 37,160,242,229,227,116,128, 37,172,238,225,108, 5, 89,216,
89,255, 90, 16, 90, 33, 90, 49,235,225,102,130, 5,218, 89,226,
89,246,228,225,231,229,243,104,129,251, 58, 89,237,232,229,226,
242,229,119,128,251, 58,232,229,226,242,229,119,128, 5,218,237,
229,109,129, 5,221, 90, 7,232,229,226,242,229,119,128, 5,221,
238,245,110,129, 5,223, 90, 24,232,229,226,242,229,119,128, 5,
223,240,101,129, 5,227, 90, 40,232,229,226,242,229,119,128, 5,
227,244,243,225,228,105,129, 5,229, 90, 59,232,229,226,242,229,
119,128, 5,229,242,243,244,244,239,238,229,227,232,233,238,229,
243,101,128, 2,201,243,232,229,249,101,128, 37,201,244,225,227,
249,242,233,236,236,233, 99,128, 4,115,246,101,142, 0, 53, 90,
139, 90,148, 90,158, 90,188, 90,195, 90,205, 90,230, 91, 1, 91,
35, 91, 47, 91, 58, 91, 91, 91, 99, 91,110,225,242,225,226,233,
99,128, 6,101,226,229,238,231,225,236,105,128, 9,235,227,233,
242,227,236,101,129, 36,100, 90,169,233,238,246,229,242,243,229,
243,225,238,243,243,229,242,233,102,128, 39,142,228,229,246, 97,
128, 9,107,229,233,231,232,244,232,115,128, 33, 93,231,117, 2,
90,212, 90,221,234,225,242,225,244,105,128, 10,235,242,237,245,
235,232,105,128, 10,107,232, 97, 2, 90,237, 90,248,227,235,225,
242,225,226,233, 99,128, 6,101,238,231,250,232,239,117,128, 48,
37,105, 2, 91, 7, 91, 25,228,229,239,231,242,225,240,232,233,
227,240,225,242,229,110,128, 50, 36,238,230,229,242,233,239,114,
128, 32,133,237,239,238,239,243,240,225,227,101,128,255, 21,239,
236,228,243,244,249,236,101,128,247, 53,112, 2, 91, 64, 91, 71,
225,242,229,110,128, 36,120,229,114, 2, 91, 78, 91, 84,233,239,
100,128, 36,140,243,233,225,110,128, 6,245,242,239,237,225,110,
128, 33,116,243,245,240,229,242,233,239,114,128, 32,117,244,232,
225,105,128, 14, 85,108,129,251, 2, 91,123,239,242,233,110,128,
1,146,109, 2, 91,136, 91,147,239,238,239,243,240,225,227,101,
128,255, 70,243,241,245,225,242,101,128, 51,153,111, 4, 91,166,
91,188, 91,200, 91,207,230, 97, 2, 91,173, 91,181,238,244,232,
225,105,128, 14, 31,244,232,225,105,128, 14, 29,238,231,237,225,
238,244,232,225,105,128, 14, 79,242,225,236,108,128, 34, 0,245,
114,142, 0, 52, 91,240, 91,249, 92, 3, 92, 33, 92, 40, 92, 65,
92, 92, 92,126, 92,138, 92,157, 92,168, 92,201, 92,209, 92,220,
225,242,225,226,233, 99,128, 6,100,226,229,238,231,225,236,105,
128, 9,234,227,233,242,227,236,101,129, 36, 99, 92, 14,233,238,
246,229,242,243,229,243,225,238,243,243,229,242,233,102,128, 39,
141,228,229,246, 97,128, 9,106,231,117, 2, 92, 47, 92, 56,234,
225,242,225,244,105,128, 10,234,242,237,245,235,232,105,128, 10,
106,232, 97, 2, 92, 72, 92, 83,227,235,225,242,225,226,233, 99,
128, 6,100,238,231,250,232,239,117,128, 48, 36,105, 2, 92, 98,
92,116,228,229,239,231,242,225,240,232,233,227,240,225,242,229,
110,128, 50, 35,238,230,229,242,233,239,114,128, 32,132,237,239,
238,239,243,240,225,227,101,128,255, 20,238,245,237,229,242,225,
244,239,242,226,229,238,231,225,236,105,128, 9,247,239,236,228,
243,244,249,236,101,128,247, 52,112, 2, 92,174, 92,181,225,242,
229,110,128, 36,119,229,114, 2, 92,188, 92,194,233,239,100,128,
36,139,243,233,225,110,128, 6,244,242,239,237,225,110,128, 33,
115,243,245,240,229,242,233,239,114,128, 32,116,116, 2, 92,226,
93, 8,229,229,110, 2, 92,234, 92,243,227,233,242,227,236,101,
128, 36,109,112, 2, 92,249, 93, 0,225,242,229,110,128, 36,129,
229,242,233,239,100,128, 36,149,104, 2, 93, 14, 93, 19,225,105,
128, 14, 84,244,239,238,229,227,232,233,238,229,243,101,128, 2,
203,240,225,242,229,110,128, 36,161,242, 97, 2, 93, 48, 93, 56,
227,244,233,239,110,128, 32, 68,238, 99,128, 32,163,103,144, 0,
103, 93, 97, 94, 43, 94, 66, 94,127, 94,144, 95, 65, 96, 58, 96,
143, 96,156, 97, 14, 97, 39, 97, 67, 97, 89, 98, 34, 98, 56, 98,
158, 97, 9, 93,117, 93,127, 93,134, 93,141, 93,205, 93,230, 93,
241, 93,252, 94, 30,226,229,238,231,225,236,105,128, 9,151,227,
245,244,101,128, 1,245,228,229,246, 97,128, 9, 23,102, 4, 93,
151, 93,160, 93,174, 93,190,225,242,225,226,233, 99,128, 6,175,
230,233,238,225,236,225,242,225,226,233, 99,128,251,147,233,238,
233,244,233,225,236,225,242,225,226,233, 99,128,251,148,237,229,
228,233,225,236,225,242,225,226,233, 99,128,251,149,231,117, 2,
93,212, 93,221,234,225,242,225,244,105,128, 10,151,242,237,245,
235,232,105,128, 10, 23,232,233,242,225,231,225,238, 97,128, 48,
76,235,225,244,225,235,225,238, 97,128, 48,172,237,237, 97,130,
3,179, 94, 6, 94, 19,236,225,244,233,238,243,237,225,236,108,
128, 2, 99,243,245,240,229,242,233,239,114,128, 2,224,238,231,
233,225,227,239,240,244,233, 99,128, 3,235, 98, 2, 94, 49, 94,
59,239,240,239,237,239,230,111,128, 49, 13,242,229,246,101,128,
1, 31, 99, 4, 94, 76, 94, 83, 94, 92, 94,114,225,242,239,110,
128, 1,231,229,228,233,236,236, 97,128, 1, 35,233,242, 99, 2,
94,100, 94,105,236,101,128, 36,214,245,237,230,236,229,120,128,
1, 29,239,237,237,225,225,227,227,229,238,116,128, 1, 35,228,
239,116,129, 1, 33, 94,135,225,227,227,229,238,116,128, 1, 33,
101, 6, 94,158, 94,169, 94,180, 94,191, 94,210, 95, 56,227,249,
242,233,236,236,233, 99,128, 4, 51,232,233,242,225,231,225,238,
97,128, 48, 82,235,225,244,225,235,225,238, 97,128, 48,178,239,
237,229,244,242,233,227,225,236,236,249,229,241,245,225,108,128,
34, 81,114, 3, 94,218, 95, 11, 95, 21,229,243,104, 3, 94,228,
94,243, 94,252,225,227,227,229,238,244,232,229,226,242,229,119,
128, 5,156,232,229,226,242,229,119,128, 5,243,237,245,241,228,
225,237,232,229,226,242,229,119,128, 5,157,237,225,238,228,226,
236,115,128, 0,223,243,232,225,249,233,109, 2, 95, 32, 95, 47,
225,227,227,229,238,244,232,229,226,242,229,119,128, 5,158,232,
229,226,242,229,119,128, 5,244,244,225,237,225,242,107,128, 48,
19,104, 5, 95, 77, 95,210, 96, 17, 96, 42, 96, 48, 97, 4, 95,
87, 95, 97, 95,120, 95,145,226,229,238,231,225,236,105,128, 9,
152,100, 2, 95,103, 95,114,225,242,237,229,238,233,225,110,128,
5,114,229,246, 97,128, 9, 24,231,117, 2, 95,127, 95,136,234,
225,242,225,244,105,128, 10,152,242,237,245,235,232,105,128, 10,
24,233,110, 4, 95,156, 95,165, 95,179, 95,195,225,242,225,226,
233, 99,128, 6, 58,230,233,238,225,236,225,242,225,226,233, 99,
128,254,206,233,238,233,244,233,225,236,225,242,225,226,233, 99,
128,254,207,237,229,228,233,225,236,225,242,225,226,233, 99,128,
254,208,101, 3, 95,218, 95,239, 96, 0,237,233,228,228,236,229,
232,239,239,235,227,249,242,233,236,236,233, 99,128, 4,149,243,
244,242,239,235,229,227,249,242,233,236,236,233, 99,128, 4,147,
245,240,244,245,242,238,227,249,242,233,236,236,233, 99,128, 4,
145,232, 97, 2, 96, 24, 96, 31,228,229,246, 97,128, 9, 90,231,
245,242,237,245,235,232,105,128, 10, 90,239,239,107,128, 2, 96,
250,243,241,245,225,242,101,128, 51,147,105, 3, 96, 66, 96, 77,
96, 88,232,233,242,225,231,225,238, 97,128, 48, 78,235,225,244,
225,235,225,238, 97,128, 48,174,109, 2, 96, 94, 96,105,225,242,
237,229,238,233,225,110,128, 5, 99,229,108,130, 5,210, 96,114,
96,134,228,225,231,229,243,104,129,251, 50, 96,125,232,229,226,
242,229,119,128,251, 50,232,229,226,242,229,119,128, 5,210,234,
229,227,249,242,233,236,236,233, 99,128, 4, 83,236,239,244,244,
225,108, 2, 96,167, 96,184,233,238,246,229,242,244,229,228,243,
244,242,239,235,101,128, 1,190,243,244,239,112,132, 2,148, 96,
199, 96,210, 96,216, 96,248,233,238,246,229,242,244,229,100,128,
2,150,237,239,100,128, 2,192,242,229,246,229,242,243,229,100,
130, 2,149, 96,231, 96,237,237,239,100,128, 2,193,243,245,240,
229,242,233,239,114,128, 2,228,243,244,242,239,235,101,129, 2,
161, 97, 3,242,229,246,229,242,243,229,100,128, 2,162,109, 2,
97, 20, 97, 28,225,227,242,239,110,128, 30, 33,239,238,239,243,
240,225,227,101,128,255, 71,111, 2, 97, 45, 97, 56,232,233,242,
225,231,225,238, 97,128, 48, 84,235,225,244,225,235,225,238, 97,
128, 48,180,240, 97, 2, 97, 74, 97, 80,242,229,110,128, 36,162,
243,241,245,225,242,101,128, 51,172,114, 2, 97, 95, 97,192, 97,
2, 97,101, 97,109,228,233,229,238,116,128, 34, 7,246,101,134,
0, 96, 97,126, 97,137, 97,154, 97,161, 97,170, 97,182,226,229,
236,239,247,227,237, 98,128, 3, 22, 99, 2, 97,143, 97,148,237,
98,128, 3, 0,239,237, 98,128, 3, 0,228,229,246, 97,128, 9,
83,236,239,247,237,239,100,128, 2,206,237,239,238,239,243,240,
225,227,101,128,255, 64,244,239,238,229,227,237, 98,128, 3, 64,
229,225,244,229,114,132, 0, 62, 97,208, 97,227, 97,239, 98, 26,
229,241,245,225,108,129, 34,101, 97,218,239,242,236,229,243,115,
128, 34,219,237,239,238,239,243,240,225,227,101,128,255, 30,111,
2, 97,245, 98, 15,114, 2, 97,251, 98, 8,229,241,245,233,246,
225,236,229,238,116,128, 34,115,236,229,243,115,128, 34,119,246,
229,242,229,241,245,225,108,128, 34,103,243,237,225,236,108,128,
254,101,115, 2, 98, 40, 98, 48,227,242,233,240,116,128, 2, 97,
244,242,239,235,101,128, 1,229,117, 4, 98, 66, 98, 77, 98,134,
98,145,232,233,242,225,231,225,238, 97,128, 48, 80,233,108, 2,
98, 84, 98,109,236,229,237,239,116, 2, 98, 94, 98,101,236,229,
230,116,128, 0,171,242,233,231,232,116,128, 0,187,243,233,238,
231,108, 2, 98,119, 98,126,236,229,230,116,128, 32, 57,242,233,
231,232,116,128, 32, 58,235,225,244,225,235,225,238, 97,128, 48,
176,242,225,237,245,243,241,245,225,242,101,128, 51, 24,249,243,
241,245,225,242,101,128, 51,201,104,144, 0,104, 98,204,101, 90,
101,125,101,162,101,202,103, 90,103,110,104, 75,104, 87,104, 99,
105,167,105,175,105,186,105,195,106, 19,106, 23, 97, 13, 98,232,
99, 15, 99, 25, 99, 55, 99, 80, 99,158, 99,170, 99,195, 99,210,
99,239, 99,252,100, 54,100, 63, 97, 2, 98,238, 99, 1,226,235,
232,225,243,233,225,238,227,249,242,233,236,236,233, 99,128, 4,
169,236,244,239,238,229,225,242,225,226,233, 99,128, 6,193,226,
229,238,231,225,236,105,128, 9,185,228,101, 2, 99, 32, 99, 50,
243,227,229,238,228,229,242,227,249,242,233,236,236,233, 99,128,
4,179,246, 97,128, 9, 57,231,117, 2, 99, 62, 99, 71,234,225,
242,225,244,105,128, 10,185,242,237,245,235,232,105,128, 10, 57,
104, 4, 99, 90, 99, 99, 99,113, 99,143,225,242,225,226,233, 99,
128, 6, 45,230,233,238,225,236,225,242,225,226,233, 99,128,254,
162,105, 2, 99,119, 99,134,238,233,244,233,225,236,225,242,225,
226,233, 99,128,254,163,242,225,231,225,238, 97,128, 48,111,237,
229,228,233,225,236,225,242,225,226,233, 99,128,254,164,233,244,
245,243,241,245,225,242,101,128, 51, 42,235,225,244,225,235,225,
238, 97,129, 48,207, 99,183,232,225,236,230,247,233,228,244,104,
128,255,138,236,225,238,244,231,245,242,237,245,235,232,105,128,
10, 77,237,250, 97, 2, 99,218, 99,227,225,242,225,226,233, 99,
128, 6, 33,236,239,247,225,242,225,226,233, 99,128, 6, 33,238,
231,245,236,230,233,236,236,229,114,128, 49,100,114, 2,100, 2,
100, 18,228,243,233,231,238,227,249,242,233,236,236,233, 99,128,
4, 74,240,239,239,110, 2,100, 27,100, 40,236,229,230,244,226,
225,242,226,245,112,128, 33,188,242,233,231,232,244,226,225,242,
226,245,112,128, 33,192,243,241,245,225,242,101,128, 51,202,244,
225,102, 3,100, 73,100,165,101, 0,240,225,244,225,104,134, 5,
178,100, 93,100, 98,100,112,100,121,100,136,100,152,177, 54,128,
5,178, 50, 2,100,104,100,108, 51,128, 5,178,102,128, 5,178,
232,229,226,242,229,119,128, 5,178,238,225,242,242,239,247,232,
229,226,242,229,119,128, 5,178,241,245,225,242,244,229,242,232,
229,226,242,229,119,128, 5,178,247,233,228,229,232,229,226,242,
229,119,128, 5,178,241,225,237,225,244,115,135, 5,179,100,188,
100,193,100,198,100,203,100,212,100,227,100,243,177, 98,128, 5,
179,178, 56,128, 5,179,179, 52,128, 5,179,232,229,226,242,229,
119,128, 5,179,238,225,242,242,239,247,232,229,226,242,229,119,
128, 5,179,241,245,225,242,244,229,242,232,229,226,242,229,119,
128, 5,179,247,233,228,229,232,229,226,242,229,119,128, 5,179,
243,229,231,239,108,135, 5,177,101, 22,101, 27,101, 32,101, 37,
101, 46,101, 61,101, 77,177, 55,128, 5,177,178, 52,128, 5,177,
179, 48,128, 5,177,232,229,226,242,229,119,128, 5,177,238,225,
242,242,239,247,232,229,226,242,229,119,128, 5,177,241,245,225,
242,244,229,242,232,229,226,242,229,119,128, 5,177,247,233,228,
229,232,229,226,242,229,119,128, 5,177, 98, 3,101, 98,101,103,
101,113,225,114,128, 1, 39,239,240,239,237,239,230,111,128, 49,
15,242,229,246,229,226,229,236,239,119,128, 30, 43, 99, 2,101,
131,101,140,229,228,233,236,236, 97,128, 30, 41,233,242, 99, 2,
101,148,101,153,236,101,128, 36,215,245,237,230,236,229,120,128,
1, 37,100, 2,101,168,101,178,233,229,242,229,243,233,115,128,
30, 39,239,116, 2,101,185,101,194,225,227,227,229,238,116,128,
30, 35,226,229,236,239,119,128, 30, 37,101,136, 5,212,101,222,
101,255,102, 19,102,248,103, 8,103, 53,103, 62,103, 75,225,242,
116,129, 38,101,101,230,243,245,233,116, 2,101,239,101,247,226,
236,225,227,107,128, 38,101,247,232,233,244,101,128, 38, 97,228,
225,231,229,243,104,129,251, 52,102, 10,232,229,226,242,229,119,
128,251, 52,104, 6,102, 33,102, 61,102, 69,102,119,102,165,102,
214, 97, 2,102, 39,102, 53,236,244,239,238,229,225,242,225,226,
233, 99,128, 6,193,242,225,226,233, 99,128, 6, 71,229,226,242,
229,119,128, 5,212,230,233,238,225,236, 97, 2,102, 80,102,111,
236,116, 2,102, 87,102, 99,239,238,229,225,242,225,226,233, 99,
128,251,167,244,247,239,225,242,225,226,233, 99,128,254,234,242,
225,226,233, 99,128,254,234,232,225,237,250,225,225,226,239,246,
101, 2,102,134,102,148,230,233,238,225,236,225,242,225,226,233,
99,128,251,165,233,243,239,236,225,244,229,228,225,242,225,226,
233, 99,128,251,164,105, 2,102,171,102,205,238,233,244,233,225,
236, 97, 2,102,183,102,197,236,244,239,238,229,225,242,225,226,
233, 99,128,251,168,242,225,226,233, 99,128,254,235,242,225,231,
225,238, 97,128, 48,120,237,229,228,233,225,236, 97, 2,102,226,
102,240,236,244,239,238,229,225,242,225,226,233, 99,128,251,169,
242,225,226,233, 99,128,254,236,233,243,229,233,229,242,225,243,
241,245,225,242,101,128, 51,123,107, 2,103, 14,103, 38,225,244,
225,235,225,238, 97,129, 48,216,103, 26,232,225,236,230,247,233,
228,244,104,128,255,141,245,244,225,225,242,245,243,241,245,225,
242,101,128, 51, 54,238,231,232,239,239,107,128, 2,103,242,245,
244,245,243,241,245,225,242,101,128, 51, 57,116,129, 5,215,103,
81,232,229,226,242,229,119,128, 5,215,232,239,239,107,129, 2,
102,103, 99,243,245,240,229,242,233,239,114,128, 2,177,105, 4,
103,120,103,205,103,216,103,241,229,245,104, 4,103,132,103,167,
103,182,103,191, 97, 2,103,138,103,153,227,233,242,227,236,229,
235,239,242,229,225,110,128, 50,123,240,225,242,229,238,235,239,
242,229,225,110,128, 50, 27,227,233,242,227,236,229,235,239,242,
229,225,110,128, 50,109,235,239,242,229,225,110,128, 49, 78,240,
225,242,229,238,235,239,242,229,225,110,128, 50, 13,232,233,242,
225,231,225,238, 97,128, 48,114,235,225,244,225,235,225,238, 97,
129, 48,210,103,229,232,225,236,230,247,233,228,244,104,128,255,
139,242,233,113,134, 5,180,104, 3,104, 8,104, 22,104, 31,104,
46,104, 62,177, 52,128, 5,180, 50, 2,104, 14,104, 18, 49,128,
5,180,100,128, 5,180,232,229,226,242,229,119,128, 5,180,238,
225,242,242,239,247,232,229,226,242,229,119,128, 5,180,241,245,
225,242,244,229,242,232,229,226,242,229,119,128, 5,180,247,233,
228,229,232,229,226,242,229,119,128, 5,180,236,233,238,229,226,
229,236,239,119,128, 30,150,237,239,238,239,243,240,225,227,101,
128,255, 72,111, 9,104,119,104,130,104,154,104,179,105, 11,105,
24,105,110,105,150,105,161,225,242,237,229,238,233,225,110,128,
5,112,232,105, 2,104,137,104,145,240,244,232,225,105,128, 14,
43,242,225,231,225,238, 97,128, 48,123,235,225,244,225,235,225,
238, 97,129, 48,219,104,167,232,225,236,230,247,233,228,244,104,
128,255,142,236,225,109,135, 5,185,104,199,104,204,104,209,104,
214,104,223,104,238,104,254,177, 57,128, 5,185,178, 54,128, 5,
185,179, 50,128, 5,185,232,229,226,242,229,119,128, 5,185,238,
225,242,242,239,247,232,229,226,242,229,119,128, 5,185,241,245,
225,242,244,229,242,232,229,226,242,229,119,128, 5,185,247,233,
228,229,232,229,226,242,229,119,128, 5,185,238,239,235,232,245,
235,244,232,225,105,128, 14, 46,111, 2,105, 30,105,100,107, 4,
105, 40,105, 52,105, 58,105, 80,225,226,239,246,229,227,239,237,
98,128, 3, 9,227,237, 98,128, 3, 9,240,225,236,225,244,225,
236,233,250,229,228,226,229,236,239,247,227,237, 98,128, 3, 33,
242,229,244,242,239,230,236,229,248,226,229,236,239,247,227,237,
98,128, 3, 34,238,243,241,245,225,242,101,128, 51, 66,114, 2,
105,116,105,143,105, 2,105,122,105,131,227,239,240,244,233, 99,
128, 3,233,250,239,238,244,225,236,226,225,114,128, 32, 21,238,
227,237, 98,128, 3, 27,244,243,240,242,233,238,231,115,128, 38,
104,245,243,101,128, 35, 2,240,225,242,229,110,128, 36,163,243,
245,240,229,242,233,239,114,128, 2,176,244,245,242,238,229,100,
128, 2,101,117, 4,105,205,105,216,105,229,105,254,232,233,242,
225,231,225,238, 97,128, 48,117,233,233,244,239,243,241,245,225,
242,101,128, 51, 51,235,225,244,225,235,225,238, 97,129, 48,213,
105,242,232,225,236,230,247,233,228,244,104,128,255,140,238,231,
225,242,245,237,236,225,245,116,129, 2,221,106, 13,227,237, 98,
128, 3, 11,118,128, 1,149,249,240,232,229,110,132, 0, 45,106,
39,106, 50,106, 62,106, 85,233,238,230,229,242,233,239,114,128,
246,229,237,239,238,239,243,240,225,227,101,128,255, 13,115, 2,
106, 68,106, 75,237,225,236,108,128,254, 99,245,240,229,242,233,
239,114,128,246,230,244,247,111,128, 32, 16,105,149, 0,105,106,
137,106,160,106,194,106,241,110,123,110,243,111, 24,111, 51,111,
213,111,217,111,255,112, 21,112,105,113, 14,113, 89,113, 97,113,
110,113,197,113,254,114, 26,114, 70,225, 99, 2,106,144,106,150,
245,244,101,128, 0,237,249,242,233,236,236,233, 99,128, 4, 79,
98, 3,106,168,106,177,106,187,229,238,231,225,236,105,128, 9,
135,239,240,239,237,239,230,111,128, 49, 39,242,229,246,101,128,
1, 45, 99, 3,106,202,106,209,106,231,225,242,239,110,128, 1,
208,233,242, 99, 2,106,217,106,222,236,101,128, 36,216,245,237,
230,236,229,120,128, 0,238,249,242,233,236,236,233, 99,128, 4,
86,100, 4,106,251,107, 5,110, 80,110,113,226,236,231,242,225,
246,101,128, 2, 9,101, 2,107, 11,110, 75,239,231,242,225,240,
104, 7,107, 32,107, 46,107, 59,109,244,110, 19,110, 32,110, 44,
229,225,242,244,232,227,233,242,227,236,101,128, 50,143,230,233,
242,229,227,233,242,227,236,101,128, 50,139,233, 99, 14,107, 90,
107,106,107,205,108, 3,108, 69,108, 98,108,114,108,171,108,220,
108,232,109, 3,109, 70,109,208,109,237,225,236,236,233,225,238,
227,229,240,225,242,229,110,128, 50, 63, 99, 4,107,116,107,127,
107,141,107,148,225,236,236,240,225,242,229,110,128, 50, 58,229,
238,244,242,229,227,233,242,227,236,101,128, 50,165,236,239,243,
101,128, 48, 6,111, 3,107,156,107,171,107,191,237,237, 97,129,
48, 1,107,164,236,229,230,116,128,255,100,238,231,242,225,244,
245,236,225,244,233,239,238,240,225,242,229,110,128, 50, 55,242,
242,229,227,244,227,233,242,227,236,101,128, 50,163,101, 3,107,
213,107,225,107,242,225,242,244,232,240,225,242,229,110,128, 50,
47,238,244,229,242,240,242,233,243,229,240,225,242,229,110,128,
50, 61,248,227,229,236,236,229,238,244,227,233,242,227,236,101,
128, 50,157,102, 2,108, 9,108, 24,229,243,244,233,246,225,236,
240,225,242,229,110,128, 50, 64,105, 2,108, 30,108, 59,238,225,
238,227,233,225,108, 2,108, 42,108, 51,227,233,242,227,236,101,
128, 50,150,240,225,242,229,110,128, 50, 54,242,229,240,225,242,
229,110,128, 50, 43,104, 2,108, 75,108, 86,225,246,229,240,225,
242,229,110,128, 50, 50,233,231,232,227,233,242,227,236,101,128,
50,164,233,244,229,242,225,244,233,239,238,237,225,242,107,128,
48, 5,108, 3,108,122,108,148,108,160,225,226,239,114, 2,108,
131,108,140,227,233,242,227,236,101,128, 50,152,240,225,242,229,
110,128, 50, 56,229,230,244,227,233,242,227,236,101,128, 50,167,
239,247,227,233,242,227,236,101,128, 50,166,109, 2,108,177,108,
209,101, 2,108,183,108,198,228,233,227,233,238,229,227,233,242,
227,236,101,128, 50,169,244,225,236,240,225,242,229,110,128, 50,
46,239,239,238,240,225,242,229,110,128, 50, 42,238,225,237,229,
240,225,242,229,110,128, 50, 52,112, 2,108,238,108,246,229,242,
233,239,100,128, 48, 2,242,233,238,244,227,233,242,227,236,101,
128, 50,158,114, 2,109, 9,109, 57,101, 3,109, 17,109, 28,109,
43,225,227,232,240,225,242,229,110,128, 50, 67,240,242,229,243,
229,238,244,240,225,242,229,110,128, 50, 57,243,239,245,242,227,
229,240,225,242,229,110,128, 50, 62,233,231,232,244,227,233,242,
227,236,101,128, 50,168,115, 5,109, 82,109,111,109,125,109,150,
109,178,101, 2,109, 88,109,101,227,242,229,244,227,233,242,227,
236,101,128, 50,153,236,230,240,225,242,229,110,128, 50, 66,239,
227,233,229,244,249,240,225,242,229,110,128, 50, 51,112, 2,109,
131,109,137,225,227,101,128, 48, 0,229,227,233,225,236,240,225,
242,229,110,128, 50, 53,116, 2,109,156,109,167,239,227,235,240,
225,242,229,110,128, 50, 49,245,228,249,240,225,242,229,110,128,
50, 59,117, 2,109,184,109,193,238,240,225,242,229,110,128, 50,
48,240,229,242,246,233,243,229,240,225,242,229,110,128, 50, 60,
119, 2,109,214,109,226,225,244,229,242,240,225,242,229,110,128,
50, 44,239,239,228,240,225,242,229,110,128, 50, 45,250,229,242,
111,128, 48, 7,109, 2,109,250,110, 7,229,244,225,236,227,233,
242,227,236,101,128, 50,142,239,239,238,227,233,242,227,236,101,
128, 50,138,238,225,237,229,227,233,242,227,236,101,128, 50,148,
243,245,238,227,233,242,227,236,101,128, 50,144,119, 2,110, 50,
110, 63,225,244,229,242,227,233,242,227,236,101,128, 50,140,239,
239,228,227,233,242,227,236,101,128, 50,141,246, 97,128, 9, 7,
233,229,242,229,243,233,115,130, 0,239,110, 94,110,102,225,227,
245,244,101,128, 30, 47,227,249,242,233,236,236,233, 99,128, 4,
229,239,244,226,229,236,239,119,128, 30,203,101, 3,110,131,110,
147,110,158,226,242,229,246,229,227,249,242,233,236,236,233, 99,
128, 4,215,227,249,242,233,236,236,233, 99,128, 4, 53,245,238,
103, 4,110,170,110,205,110,220,110,229, 97, 2,110,176,110,191,
227,233,242,227,236,229,235,239,242,229,225,110,128, 50,117,240,
225,242,229,238,235,239,242,229,225,110,128, 50, 21,227,233,242,
227,236,229,235,239,242,229,225,110,128, 50,103,235,239,242,229,
225,110,128, 49, 71,240,225,242,229,238,235,239,242,229,225,110,
128, 50, 7,103, 2,110,249,111, 0,242,225,246,101,128, 0,236,
117, 2,111, 6,111, 15,234,225,242,225,244,105,128, 10,135,242,
237,245,235,232,105,128, 10, 7,104, 2,111, 30,111, 40,233,242,
225,231,225,238, 97,128, 48, 68,239,239,235,225,226,239,246,101,
128, 30,201,105, 8,111, 69,111, 79,111, 90,111, 97,111,122,111,
138,111,153,111,169,226,229,238,231,225,236,105,128, 9,136,227,
249,242,233,236,236,233, 99,128, 4, 56,228,229,246, 97,128, 9,
8,231,117, 2,111,104,111,113,234,225,242,225,244,105,128, 10,
136,242,237,245,235,232,105,128, 10, 8,237,225,244,242,225,231,
245,242,237,245,235,232,105,128, 10, 64,238,246,229,242,244,229,
228,226,242,229,246,101,128, 2, 11,243,232,239,242,244,227,249,
242,233,236,236,233, 99,128, 4, 57,246,239,247,229,236,243,233,
231,110, 3,111,185,111,195,111,202,226,229,238,231,225,236,105,
128, 9,192,228,229,246, 97,128, 9, 64,231,245,234,225,242,225,
244,105,128, 10,192,106,128, 1, 51,107, 2,111,223,111,247,225,
244,225,235,225,238, 97,129, 48,164,111,235,232,225,236,230,247,
233,228,244,104,128,255,114,239,242,229,225,110,128, 49, 99,108,
2,112, 5,112, 10,228,101,128, 2,220,245,249,232,229,226,242,
229,119,128, 5,172,109, 2,112, 27,112, 94, 97, 3,112, 35,112,
55,112, 80,227,242,239,110,129, 1, 43,112, 44,227,249,242,233,
236,236,233, 99,128, 4,227,231,229,239,242,225,240,240,242,239,
248,233,237,225,244,229,236,249,229,241,245,225,108,128, 34, 83,
244,242,225,231,245,242,237,245,235,232,105,128, 10, 63,239,238,
239,243,240,225,227,101,128,255, 73,110, 5,112,117,112,127,112,
136,112,148,112,232,227,242,229,237,229,238,116,128, 34, 6,230,
233,238,233,244,121,128, 34, 30,233,225,242,237,229,238,233,225,
110,128, 5,107,116, 2,112,154,112,222,101, 2,112,160,112,211,
231,242,225,108,131, 34, 43,112,173,112,191,112,196, 98, 2,112,
179,112,187,239,244,244,239,109,128, 35, 33,116,128, 35, 33,229,
120,128,248,245,116, 2,112,202,112,207,239,112,128, 35, 32,112,
128, 35, 32,242,243,229,227,244,233,239,110,128, 34, 41,233,243,
241,245,225,242,101,128, 51, 5,118, 3,112,240,112,249,113, 2,
226,245,236,236,229,116,128, 37,216,227,233,242,227,236,101,128,
37,217,243,237,233,236,229,230,225,227,101,128, 38, 59,111, 3,
113, 22,113, 33,113, 41,227,249,242,233,236,236,233, 99,128, 4,
81,231,239,238,229,107,128, 1, 47,244, 97,131, 3,185,113, 52,
113, 73,113, 81,228,233,229,242,229,243,233,115,129, 3,202,113,
65,244,239,238,239,115,128, 3,144,236,225,244,233,110,128, 2,
105,244,239,238,239,115,128, 3,175,240,225,242,229,110,128, 36,
164,242,233,231,245,242,237,245,235,232,105,128, 10,114,115, 4,
113,120,113,165,113,179,113,187,237,225,236,108, 2,113,129,113,
140,232,233,242,225,231,225,238, 97,128, 48, 67,235,225,244,225,
235,225,238, 97,129, 48,163,113,153,232,225,236,230,247,233,228,
244,104,128,255,104,243,232,225,242,226,229,238,231,225,236,105,
128, 9,250,244,242,239,235,101,128, 2,104,245,240,229,242,233,
239,114,128,246,237,116, 2,113,203,113,237,229,242,225,244,233,
239,110, 2,113,215,113,226,232,233,242,225,231,225,238, 97,128,
48,157,235,225,244,225,235,225,238, 97,128, 48,253,233,236,228,
101,129, 1, 41,113,246,226,229,236,239,119,128, 30, 45,117, 2,
114, 4,114, 15,226,239,240,239,237,239,230,111,128, 49, 41,227,
249,242,233,236,236,233, 99,128, 4, 78,246,239,247,229,236,243,
233,231,110, 3,114, 42,114, 52,114, 59,226,229,238,231,225,236,
105,128, 9,191,228,229,246, 97,128, 9, 63,231,245,234,225,242,
225,244,105,128, 10,191,250,232,233,244,243, 97, 2,114, 81,114,
92,227,249,242,233,236,236,233, 99,128, 4,117,228,226,236,231,
242,225,246,229,227,249,242,233,236,236,233, 99,128, 4,119,106,
138, 0,106,114,135,114,198,114,209,115, 3,115, 19,115,132,115,
201,115,206,115,218,115,226, 97, 4,114,145,114,156,114,166,114,
173,225,242,237,229,238,233,225,110,128, 5,113,226,229,238,231,
225,236,105,128, 9,156,228,229,246, 97,128, 9, 28,231,117, 2,
114,180,114,189,234,225,242,225,244,105,128, 10,156,242,237,245,
235,232,105,128, 10, 28,226,239,240,239,237,239,230,111,128, 49,
16, 99, 3,114,217,114,224,114,246,225,242,239,110,128, 1,240,
233,242, 99, 2,114,232,114,237,236,101,128, 36,217,245,237,230,
236,229,120,128, 1, 53,242,239,243,243,229,228,244,225,233,108,
128, 2,157,228,239,244,236,229,243,243,243,244,242,239,235,101,
128, 2, 95,101, 3,115, 27,115, 38,115,103,227,249,242,233,236,
236,233, 99,128, 4, 88,229,109, 4,115, 49,115, 58,115, 72,115,
88,225,242,225,226,233, 99,128, 6, 44,230,233,238,225,236,225,
242,225,226,233, 99,128,254,158,233,238,233,244,233,225,236,225,
242,225,226,233, 99,128,254,159,237,229,228,233,225,236,225,242,
225,226,233, 99,128,254,160,104, 2,115,109,115,118,225,242,225,
226,233, 99,128, 6,152,230,233,238,225,236,225,242,225,226,233,
99,128,251,139,104, 2,115,138,115,188, 97, 3,115,146,115,156,
115,163,226,229,238,231,225,236,105,128, 9,157,228,229,246, 97,
128, 9, 29,231,117, 2,115,170,115,179,234,225,242,225,244,105,
128, 10,157,242,237,245,235,232,105,128, 10, 29,229,232,225,242,
237,229,238,233,225,110,128, 5,123,233,115,128, 48, 4,237,239,
238,239,243,240,225,227,101,128,255, 74,240,225,242,229,110,128,
36,165,243,245,240,229,242,233,239,114,128, 2,178,107,146, 0,
107,116, 21,118,110,118,121,118,183,118,194,119, 28,119, 42,120,
150,121, 90,121,103,121,129,121,178,122, 60,122, 82,122, 95,122,
118,122,160,122,170, 97, 12,116, 47,116, 79,116,101,116,131,116,
245,117, 14,117, 44,117, 69,117,175,117,189,118, 56,118, 85, 98,
2,116, 53,116, 70,225,243,232,235,233,242,227,249,242,233,236,
236,233, 99,128, 4,161,229,238,231,225,236,105,128, 9,149, 99,
2,116, 85,116, 91,245,244,101,128, 30, 49,249,242,233,236,236,
233, 99,128, 4, 58,228,101, 2,116,108,116,126,243,227,229,238,
228,229,242,227,249,242,233,236,236,233, 99,128, 4,155,246, 97,
128, 9, 21,102,135, 5,219,116,149,116,158,116,178,116,192,116,
201,116,217,116,232,225,242,225,226,233, 99,128, 6, 67,228,225,
231,229,243,104,129,251, 59,116,169,232,229,226,242,229,119,128,
251, 59,230,233,238,225,236,225,242,225,226,233, 99,128,254,218,
232,229,226,242,229,119,128, 5,219,233,238,233,244,233,225,236,
225,242,225,226,233, 99,128,254,219,237,229,228,233,225,236,225,
242,225,226,233, 99,128,254,220,242,225,230,229,232,229,226,242,
229,119,128,251, 77,231,117, 2,116,252,117, 5,234,225,242,225,
244,105,128, 10,149,242,237,245,235,232,105,128, 10, 21,104, 2,
117, 20,117, 30,233,242,225,231,225,238, 97,128, 48, 75,239,239,
235,227,249,242,233,236,236,233, 99,128, 4,196,235,225,244,225,
235,225,238, 97,129, 48,171,117, 57,232,225,236,230,247,233,228,
244,104,128,255,118,112, 2,117, 75,117, 96,240, 97,129, 3,186,
117, 82,243,249,237,226,239,236,231,242,229,229,107,128, 3,240,
249,229,239,245,110, 3,117,108,117,122,117,156,237,233,229,245,
237,235,239,242,229,225,110,128, 49,113,112, 2,117,128,117,143,
232,233,229,245,240,232,235,239,242,229,225,110,128, 49,132,233,
229,245,240,235,239,242,229,225,110,128, 49,120,243,243,225,238,
231,240,233,229,245,240,235,239,242,229,225,110,128, 49,121,242,
239,242,233,233,243,241,245,225,242,101,128, 51, 13,115, 5,117,
201,117,245,118, 4,118, 12,118, 40,232,233,228,225,225,245,244,
111, 2,117,214,117,223,225,242,225,226,233, 99,128, 6, 64,238,
239,243,233,228,229,226,229,225,242,233,238,231,225,242,225,226,
233, 99,128, 6, 64,237,225,236,236,235,225,244,225,235,225,238,
97,128, 48,245,241,245,225,242,101,128, 51,132,242, 97, 2,118,
19,118, 28,225,242,225,226,233, 99,128, 6, 80,244,225,238,225,
242,225,226,233, 99,128, 6, 77,244,242,239,235,229,227,249,242,
233,236,236,233, 99,128, 4,159,244,225,232,233,242,225,240,242,
239,236,239,238,231,237,225,242,235,232,225,236,230,247,233,228,
244,104,128,255,112,246,229,242,244,233,227,225,236,243,244,242,
239,235,229,227,249,242,233,236,236,233, 99,128, 4,157,226,239,
240,239,237,239,230,111,128, 49, 14, 99, 4,118,131,118,153,118,
162,118,170, 97, 2,118,137,118,147,236,243,241,245,225,242,101,
128, 51,137,242,239,110,128, 1,233,229,228,233,236,236, 97,128,
1, 55,233,242,227,236,101,128, 36,218,239,237,237,225,225,227,
227,229,238,116,128, 1, 55,228,239,244,226,229,236,239,119,128,
30, 51,101, 4,118,204,118,231,119, 0,119, 12,104, 2,118,210,
118,221,225,242,237,229,238,233,225,110,128, 5,132,233,242,225,
231,225,238, 97,128, 48, 81,235,225,244,225,235,225,238, 97,129,
48,177,118,244,232,225,236,230,247,233,228,244,104,128,255,121,
238,225,242,237,229,238,233,225,110,128, 5,111,243,237,225,236,
236,235,225,244,225,235,225,238, 97,128, 48,246,231,242,229,229,
238,236,225,238,228,233, 99,128, 1, 56,104, 6,119, 56,119,185,
119,196,119,221,120, 52,120,140, 97, 5,119, 68,119, 78,119, 89,
119, 96,119,121,226,229,238,231,225,236,105,128, 9,150,227,249,
242,233,236,236,233, 99,128, 4, 69,228,229,246, 97,128, 9, 22,
231,117, 2,119,103,119,112,234,225,242,225,244,105,128, 10,150,
242,237,245,235,232,105,128, 10, 22,104, 4,119,131,119,140,119,
154,119,170,225,242,225,226,233, 99,128, 6, 46,230,233,238,225,
236,225,242,225,226,233, 99,128,254,166,233,238,233,244,233,225,
236,225,242,225,226,233, 99,128,254,167,237,229,228,233,225,236,
225,242,225,226,233, 99,128,254,168,229,233,227,239,240,244,233,
99,128, 3,231,232, 97, 2,119,203,119,210,228,229,246, 97,128,
9, 89,231,245,242,237,245,235,232,105,128, 10, 89,233,229,245,
235,104, 4,119,235,120, 14,120, 29,120, 38, 97, 2,119,241,120,
0,227,233,242,227,236,229,235,239,242,229,225,110,128, 50,120,
240,225,242,229,238,235,239,242,229,225,110,128, 50, 24,227,233,
242,227,236,229,235,239,242,229,225,110,128, 50,106,235,239,242,
229,225,110,128, 49, 75,240,225,242,229,238,235,239,242,229,225,
110,128, 50, 10,111, 4,120, 62,120,111,120,121,120,126,235,104,
4,120, 73,120, 82,120, 91,120,101,225,233,244,232,225,105,128,
14, 2,239,238,244,232,225,105,128, 14, 5,245,225,244,244,232,
225,105,128, 14, 3,247,225,233,244,232,225,105,128, 14, 4,237,
245,244,244,232,225,105,128, 14, 91,239,107,128, 1,153,242,225,
235,232,225,238,231,244,232,225,105,128, 14, 6,250,243,241,245,
225,242,101,128, 51,145,105, 4,120,160,120,171,120,196,120,245,
232,233,242,225,231,225,238, 97,128, 48, 77,235,225,244,225,235,
225,238, 97,129, 48,173,120,184,232,225,236,230,247,233,228,244,
104,128,255,119,242,111, 3,120,205,120,220,120,236,231,245,242,
225,237,245,243,241,245,225,242,101,128, 51, 21,237,229,229,244,
239,242,245,243,241,245,225,242,101,128, 51, 22,243,241,245,225,
242,101,128, 51, 20,249,229,239,107, 5,121, 4,121, 39,121, 54,
121, 63,121, 77, 97, 2,121, 10,121, 25,227,233,242,227,236,229,
235,239,242,229,225,110,128, 50,110,240,225,242,229,238,235,239,
242,229,225,110,128, 50, 14,227,233,242,227,236,229,235,239,242,
229,225,110,128, 50, 96,235,239,242,229,225,110,128, 49, 49,240,
225,242,229,238,235,239,242,229,225,110,128, 50, 0,243,233,239,
243,235,239,242,229,225,110,128, 49, 51,234,229,227,249,242,233,
236,236,233, 99,128, 4, 92,108, 2,121,109,121,120,233,238,229,
226,229,236,239,119,128, 30, 53,243,241,245,225,242,101,128, 51,
152,109, 3,121,137,121,151,121,162,227,245,226,229,228,243,241,
245,225,242,101,128, 51,166,239,238,239,243,240,225,227,101,128,
255, 75,243,241,245,225,242,229,228,243,241,245,225,242,101,128,
51,162,111, 5,121,190,121,216,121,254,122, 10,122, 24,104, 2,
121,196,121,206,233,242,225,231,225,238, 97,128, 48, 83,237,243,
241,245,225,242,101,128, 51,192,235, 97, 2,121,223,121,231,233,
244,232,225,105,128, 14, 1,244,225,235,225,238, 97,129, 48,179,
121,242,232,225,236,230,247,233,228,244,104,128,255,122,239,240,
239,243,241,245,225,242,101,128, 51, 30,240,240,225,227,249,242,
233,236,236,233, 99,128, 4,129,114, 2,122, 30,122, 50,229,225,
238,243,244,225,238,228,225,242,228,243,249,237,226,239,108,128,
50,127,239,238,233,243,227,237, 98,128, 3, 67,240, 97, 2,122,
67,122, 73,242,229,110,128, 36,166,243,241,245,225,242,101,128,
51,170,243,233,227,249,242,233,236,236,233, 99,128, 4,111,116,
2,122,101,122,110,243,241,245,225,242,101,128, 51,207,245,242,
238,229,100,128, 2,158,117, 2,122,124,122,135,232,233,242,225,
231,225,238, 97,128, 48, 79,235,225,244,225,235,225,238, 97,129,
48,175,122,148,232,225,236,230,247,233,228,244,104,128,255,120,
246,243,241,245,225,242,101,128, 51,184,247,243,241,245,225,242,
101,128, 51,190,108,146, 0,108,122,220,124,247,125, 20,125, 86,
125,124,126, 20,126, 29,126, 45,126, 69,126, 87,126,205,126,246,
127,125,127,133,127,166,127,175,127,183,127,245, 97, 7,122,236,
122,246,122,253,123, 4,123, 29,123, 45,124,235,226,229,238,231,
225,236,105,128, 9,178,227,245,244,101,128, 1, 58,228,229,246,
97,128, 9, 50,231,117, 2,123, 11,123, 20,234,225,242,225,244,
105,128, 10,178,242,237,245,235,232,105,128, 10, 50,235,235,232,
225,238,231,249,225,239,244,232,225,105,128, 14, 69,109, 10,123,
67,124, 6,124, 23,124, 61,124, 75,124, 94,124,110,124,130,124,
150,124,173, 97, 2,123, 73,123,254,236,229,102, 4,123, 85,123,
99,123,191,123,208,230,233,238,225,236,225,242,225,226,233, 99,
128,254,252,232,225,237,250, 97, 2,123,109,123,150,225,226,239,
246,101, 2,123,119,123,133,230,233,238,225,236,225,242,225,226,
233, 99,128,254,248,233,243,239,236,225,244,229,228,225,242,225,
226,233, 99,128,254,247,226,229,236,239,119, 2,123,160,123,174,
230,233,238,225,236,225,242,225,226,233, 99,128,254,250,233,243,
239,236,225,244,229,228,225,242,225,226,233, 99,128,254,249,233,
243,239,236,225,244,229,228,225,242,225,226,233, 99,128,254,251,
237,225,228,228,225,225,226,239,246,101, 2,123,223,123,237,230,
233,238,225,236,225,242,225,226,233, 99,128,254,246,233,243,239,
236,225,244,229,228,225,242,225,226,233, 99,128,254,245,242,225,
226,233, 99,128, 6, 68,226,228, 97,129, 3,187,124, 14,243,244,
242,239,235,101,128, 1,155,229,100,130, 5,220,124, 32,124, 52,
228,225,231,229,243,104,129,251, 60,124, 43,232,229,226,242,229,
119,128,251, 60,232,229,226,242,229,119,128, 5,220,230,233,238,
225,236,225,242,225,226,233, 99,128,254,222,232,225,232,233,238,
233,244,233,225,236,225,242,225,226,233, 99,128,252,202,233,238,
233,244,233,225,236,225,242,225,226,233, 99,128,254,223,234,229,
229,237,233,238,233,244,233,225,236,225,242,225,226,233, 99,128,
252,201,235,232,225,232,233,238,233,244,233,225,236,225,242,225,
226,233, 99,128,252,203,236,225,237,232,229,232,233,243,239,236,
225,244,229,228,225,242,225,226,233, 99,128,253,242,237,101, 2,
124,180,124,193,228,233,225,236,225,242,225,226,233, 99,128,254,
224,229,109, 2,124,200,124,219,232,225,232,233,238,233,244,233,
225,236,225,242,225,226,233, 99,128,253,136,233,238,233,244,233,
225,236,225,242,225,226,233, 99,128,252,204,242,231,229,227,233,
242,227,236,101,128, 37,239, 98, 3,124,255,125, 4,125, 10,225,
114,128, 1,154,229,236,116,128, 2,108,239,240,239,237,239,230,
111,128, 49, 12, 99, 4,125, 30,125, 37,125, 46,125, 73,225,242,
239,110,128, 1, 62,229,228,233,236,236, 97,128, 1, 60,233,242,
99, 2,125, 54,125, 59,236,101,128, 36,219,245,237,230,236,229,
248,226,229,236,239,119,128, 30, 61,239,237,237,225,225,227,227,
229,238,116,128, 1, 60,228,239,116,130, 1, 64,125, 96,125,105,
225,227,227,229,238,116,128, 1, 64,226,229,236,239,119,129, 30,
55,125,115,237,225,227,242,239,110,128, 30, 57,101, 3,125,132,
125,170,126, 15,230,116, 2,125,139,125,155,225,238,231,236,229,
225,226,239,246,229,227,237, 98,128, 3, 26,244,225,227,235,226,
229,236,239,247,227,237, 98,128, 3, 24,243,115,132, 0, 60,125,
183,125,205,125,217,126, 7,229,241,245,225,108,129, 34,100,125,
193,239,242,231,242,229,225,244,229,114,128, 34,218,237,239,238,
239,243,240,225,227,101,128,255, 28,111, 2,125,223,125,252,114,
2,125,229,125,242,229,241,245,233,246,225,236,229,238,116,128,
34,114,231,242,229,225,244,229,114,128, 34,118,246,229,242,229,
241,245,225,108,128, 34,102,243,237,225,236,108,128,254,100,250,
104,128, 2,110,230,226,236,239,227,107,128, 37,140,232,239,239,
235,242,229,244,242,239,230,236,229,120,128, 2,109,105, 2,126,
51,126, 56,242, 97,128, 32,164,247,238,225,242,237,229,238,233,
225,110,128, 5,108,106,129, 1,201,126, 75,229,227,249,242,233,
236,236,233, 99,128, 4, 89,108,132,246,192,126, 99,126,123,126,
134,126,143, 97, 2,126,105,126,112,228,229,246, 97,128, 9, 51,
231,245,234,225,242,225,244,105,128, 10,179,233,238,229,226,229,
236,239,119,128, 30, 59,236,225,228,229,246, 97,128, 9, 52,246,
239,227,225,236,233, 99, 3,126,157,126,167,126,174,226,229,238,
231,225,236,105,128, 9,225,228,229,246, 97,128, 9, 97,246,239,
247,229,236,243,233,231,110, 2,126,188,126,198,226,229,238,231,
225,236,105,128, 9,227,228,229,246, 97,128, 9, 99,109, 3,126,
213,126,226,126,237,233,228,228,236,229,244,233,236,228,101,128,
2,107,239,238,239,243,240,225,227,101,128,255, 76,243,241,245,
225,242,101,128, 51,208,111, 6,127, 4,127, 16,127, 58,127, 69,
127, 75,127,117,227,232,245,236,225,244,232,225,105,128, 14, 44,
231,233,227,225,108, 3,127, 28,127, 34,127, 53,225,238,100,128,
34, 39,238,239,116,129, 0,172,127, 42,242,229,246,229,242,243,
229,100,128, 35, 16,239,114,128, 34, 40,236,233,238,231,244,232,
225,105,128, 14, 37,238,231,115,128, 1,127,247,236,233,238,101,
2,127, 85,127,108, 99, 2,127, 91,127,103,229,238,244,229,242,
236,233,238,101,128,254, 78,237, 98,128, 3, 50,228,225,243,232,
229,100,128,254, 77,250,229,238,231,101,128, 37,202,240,225,242,
229,110,128, 36,167,115, 3,127,141,127,148,127,156,236,225,243,
104,128, 1, 66,241,245,225,242,101,128, 33, 19,245,240,229,242,
233,239,114,128,246,238,244,243,232,225,228,101,128, 37,145,245,
244,232,225,105,128, 14, 38,246,239,227,225,236,233, 99, 3,127,
197,127,207,127,214,226,229,238,231,225,236,105,128, 9,140,228,
229,246, 97,128, 9, 12,246,239,247,229,236,243,233,231,110, 2,
127,228,127,238,226,229,238,231,225,236,105,128, 9,226,228,229,
246, 97,128, 9, 98,248,243,241,245,225,242,101,128, 51,211,109,
144, 0,109,128, 35,130,144,130,169,130,196,130,221,132, 18,132,
40,133, 95,133,125,133,174,134, 25,134, 47,134, 72,134, 81,135,
108,135,136, 97, 12,128, 61,128, 71,128,135,128,142,128,167,128,
215,130, 51,130, 76,130, 81,130, 95,130,107,130,112,226,229,238,
231,225,236,105,128, 9,174, 99, 2,128, 77,128,129,242,239,110,
132, 0,175,128, 91,128,102,128,108,128,117,226,229,236,239,247,
227,237, 98,128, 3, 49,227,237, 98,128, 3, 4,236,239,247,237,
239,100,128, 2,205,237,239,238,239,243,240,225,227,101,128,255,
227,245,244,101,128, 30, 63,228,229,246, 97,128, 9, 46,231,117,
2,128,149,128,158,234,225,242,225,244,105,128, 10,174,242,237,
245,235,232,105,128, 10, 46,104, 2,128,173,128,205,225,240,225,
235,104, 2,128,183,128,192,232,229,226,242,229,119,128, 5,164,
236,229,230,244,232,229,226,242,229,119,128, 5,164,233,242,225,
231,225,238, 97,128, 48,126,105, 5,128,227,129, 40,129,103,129,
133,130, 39,227,232,225,244,244,225,247, 97, 3,128,242,129, 17,
129, 24,236,239,119, 2,128,250,129, 5,236,229,230,244,244,232,
225,105,128,248,149,242,233,231,232,244,244,232,225,105,128,248,
148,244,232,225,105,128, 14, 75,245,240,240,229,242,236,229,230,
244,244,232,225,105,128,248,147,229,107, 3,129, 49,129, 80,129,
87,236,239,119, 2,129, 57,129, 68,236,229,230,244,244,232,225,
105,128,248,140,242,233,231,232,244,244,232,225,105,128,248,139,
244,232,225,105,128, 14, 72,245,240,240,229,242,236,229,230,244,
244,232,225,105,128,248,138,232,225,238,225,235,225,116, 2,129,
115,129,126,236,229,230,244,244,232,225,105,128,248,132,244,232,
225,105,128, 14, 49,116, 3,129,141,129,169,129,232,225,233,235,
232,117, 2,129,151,129,162,236,229,230,244,244,232,225,105,128,
248,137,244,232,225,105,128, 14, 71,232,111, 3,129,178,129,209,
129,216,236,239,119, 2,129,186,129,197,236,229,230,244,244,232,
225,105,128,248,143,242,233,231,232,244,244,232,225,105,128,248,
142,244,232,225,105,128, 14, 73,245,240,240,229,242,236,229,230,
244,244,232,225,105,128,248,141,242,105, 3,129,241,130, 16,130,
23,236,239,119, 2,129,249,130, 4,236,229,230,244,244,232,225,
105,128,248,146,242,233,231,232,244,244,232,225,105,128,248,145,
244,232,225,105,128, 14, 74,245,240,240,229,242,236,229,230,244,
244,232,225,105,128,248,144,249,225,237,239,235,244,232,225,105,
128, 14, 70,235,225,244,225,235,225,238, 97,129, 48,222,130, 64,
232,225,236,230,247,233,228,244,104,128,255,143,236,101,128, 38,
66,238,243,249,239,238,243,241,245,225,242,101,128, 51, 71,241,
225,230,232,229,226,242,229,119,128, 5,190,242,115,128, 38, 66,
115, 2,130,118,130,136,239,242,225,227,233,242,227,236,229,232,
229,226,242,229,119,128, 5,175,241,245,225,242,101,128, 51,131,
98, 2,130,150,130,160,239,240,239,237,239,230,111,128, 49, 7,
243,241,245,225,242,101,128, 51,212, 99, 2,130,175,130,183,233,
242,227,236,101,128, 36,220,245,226,229,228,243,241,245,225,242,
101,128, 51,165,228,239,116, 2,130,204,130,213,225,227,227,229,
238,116,128, 30, 65,226,229,236,239,119,128, 30, 67,101, 7,130,
237,131,108,131,119,131,134,131,159,131,196,131,208,101, 2,130,
243,131, 95,109, 4,130,253,131, 6,131, 20,131, 36,225,242,225,
226,233, 99,128, 6, 69,230,233,238,225,236,225,242,225,226,233,
99,128,254,226,233,238,233,244,233,225,236,225,242,225,226,233,
99,128,254,227,237,101, 2,131, 43,131, 56,228,233,225,236,225,
242,225,226,233, 99,128,254,228,229,237,105, 2,131, 64,131, 79,
238,233,244,233,225,236,225,242,225,226,233, 99,128,252,209,243,
239,236,225,244,229,228,225,242,225,226,233, 99,128,252, 72,244,
239,242,245,243,241,245,225,242,101,128, 51, 77,232,233,242,225,
231,225,238, 97,128, 48,129,233,250,233,229,242,225,243,241,245,
225,242,101,128, 51,126,235,225,244,225,235,225,238, 97,129, 48,
225,131,147,232,225,236,230,247,233,228,244,104,128,255,146,109,
130, 5,222,131,167,131,187,228,225,231,229,243,104,129,251, 62,
131,178,232,229,226,242,229,119,128,251, 62,232,229,226,242,229,
119,128, 5,222,238,225,242,237,229,238,233,225,110,128, 5,116,
242,235,232, 97, 3,131,219,131,228,132, 5,232,229,226,242,229,
119,128, 5,165,235,229,230,245,236, 97, 2,131,239,131,248,232,
229,226,242,229,119,128, 5,166,236,229,230,244,232,229,226,242,
229,119,128, 5,166,236,229,230,244,232,229,226,242,229,119,128,
5,165,104, 2,132, 24,132, 30,239,239,107,128, 2,113,250,243,
241,245,225,242,101,128, 51,146,105, 6,132, 54,132, 91,132,228,
132,239,133, 8,133, 65,228,100, 2,132, 61,132, 86,236,229,228,
239,244,235,225,244,225,235,225,238,225,232,225,236,230,247,233,
228,244,104,128,255,101,239,116,128, 0,183,229,245,109, 5,132,
105,132,140,132,155,132,164,132,215, 97, 2,132,111,132,126,227,
233,242,227,236,229,235,239,242,229,225,110,128, 50,114,240,225,
242,229,238,235,239,242,229,225,110,128, 50, 18,227,233,242,227,
236,229,235,239,242,229,225,110,128, 50,100,235,239,242,229,225,
110,128, 49, 65,112, 2,132,170,132,202, 97, 2,132,176,132,190,
238,243,233,239,243,235,239,242,229,225,110,128, 49,112,242,229,
238,235,239,242,229,225,110,128, 50, 4,233,229,245,240,235,239,
242,229,225,110,128, 49,110,243,233,239,243,235,239,242,229,225,
110,128, 49,111,232,233,242,225,231,225,238, 97,128, 48,127,235,
225,244,225,235,225,238, 97,129, 48,223,132,252,232,225,236,230,
247,233,228,244,104,128,255,144,238,117, 2,133, 15,133, 60,115,
132, 34, 18,133, 27,133, 38,133, 47,133, 53,226,229,236,239,247,
227,237, 98,128, 3, 32,227,233,242,227,236,101,128, 34,150,237,
239,100,128, 2,215,240,236,245,115,128, 34, 19,244,101,128, 32,
50,242,105, 2,133, 72,133, 86,226,225,225,242,245,243,241,245,
225,242,101,128, 51, 74,243,241,245,225,242,101,128, 51, 73,108,
2,133,101,133,116,239,238,231,236,229,231,244,245,242,238,229,
100,128, 2,112,243,241,245,225,242,101,128, 51,150,109, 3,133,
133,133,147,133,158,227,245,226,229,228,243,241,245,225,242,101,
128, 51,163,239,238,239,243,240,225,227,101,128,255, 77,243,241,
245,225,242,229,228,243,241,245,225,242,101,128, 51,159,111, 5,
133,186,133,212,133,237,133,247,134, 0,104, 2,133,192,133,202,
233,242,225,231,225,238, 97,128, 48,130,237,243,241,245,225,242,
101,128, 51,193,235,225,244,225,235,225,238, 97,129, 48,226,133,
225,232,225,236,230,247,233,228,244,104,128,255,147,236,243,241,
245,225,242,101,128, 51,214,237,225,244,232,225,105,128, 14, 33,
246,229,242,243,243,241,245,225,242,101,129, 51,167,134, 15,228,
243,241,245,225,242,101,128, 51,168,240, 97, 2,134, 32,134, 38,
242,229,110,128, 36,168,243,241,245,225,242,101,128, 51,171,115,
2,134, 53,134, 62,243,241,245,225,242,101,128, 51,179,245,240,
229,242,233,239,114,128,246,239,244,245,242,238,229,100,128, 2,
111,117,141, 0,181,134,111,134,115,134,125,134,149,134,159,134,
181,134,192,134,217,134,240,134,250,135, 24,135, 88,135, 98, 49,
128, 0,181,225,243,241,245,225,242,101,128, 51,130,227,104, 2,
134,132,134,142,231,242,229,225,244,229,114,128, 34,107,236,229,
243,115,128, 34,106,230,243,241,245,225,242,101,128, 51,140,103,
2,134,165,134,172,242,229,229,107,128, 3,188,243,241,245,225,
242,101,128, 51,141,232,233,242,225,231,225,238, 97,128, 48,128,
235,225,244,225,235,225,238, 97,129, 48,224,134,205,232,225,236,
230,247,233,228,244,104,128,255,145,108, 2,134,223,134,232,243,
241,245,225,242,101,128, 51,149,244,233,240,236,121,128, 0,215,
237,243,241,245,225,242,101,128, 51,155,238,225,104, 2,135, 2,
135, 11,232,229,226,242,229,119,128, 5,163,236,229,230,244,232,
229,226,242,229,119,128, 5,163,115, 2,135, 30,135, 79,233, 99,
3,135, 39,135, 56,135, 67,225,236,238,239,244,101,129, 38,106,
135, 50,228,226,108,128, 38,107,230,236,225,244,243,233,231,110,
128, 38,109,243,232,225,242,240,243,233,231,110,128, 38,111,243,
241,245,225,242,101,128, 51,178,246,243,241,245,225,242,101,128,
51,182,247,243,241,245,225,242,101,128, 51,188,118, 2,135,114,
135,127,237,229,231,225,243,241,245,225,242,101,128, 51,185,243,
241,245,225,242,101,128, 51,183,119, 2,135,142,135,155,237,229,
231,225,243,241,245,225,242,101,128, 51,191,243,241,245,225,242,
101,128, 51,189,110,150, 0,110,135,212,136, 90,136,114,136,180,
136,205,137, 7,137, 17,137, 84,137,127,139,161,139,179,139,204,
139,235,140, 5,140, 70,142, 52,142, 60,142, 85,142, 93,143, 61,
143, 71,143, 81, 97, 8,135,230,135,250,136, 1,136, 8,136, 33,
136, 44,136, 69,136, 81, 98, 2,135,236,135,245,229,238,231,225,
236,105,128, 9,168,236, 97,128, 34, 7,227,245,244,101,128, 1,
68,228,229,246, 97,128, 9, 40,231,117, 2,136, 15,136, 24,234,
225,242,225,244,105,128, 10,168,242,237,245,235,232,105,128, 10,
40,232,233,242,225,231,225,238, 97,128, 48,106,235,225,244,225,
235,225,238, 97,129, 48,202,136, 57,232,225,236,230,247,233,228,
244,104,128,255,133,240,239,243,244,242,239,240,232,101,128, 1,
73,243,241,245,225,242,101,128, 51,129, 98, 2,136, 96,136,106,
239,240,239,237,239,230,111,128, 49, 11,243,240,225,227,101,128,
0,160, 99, 4,136,124,136,131,136,140,136,167,225,242,239,110,
128, 1, 72,229,228,233,236,236, 97,128, 1, 70,233,242, 99, 2,
136,148,136,153,236,101,128, 36,221,245,237,230,236,229,248,226,
229,236,239,119,128, 30, 75,239,237,237,225,225,227,227,229,238,
116,128, 1, 70,228,239,116, 2,136,188,136,197,225,227,227,229,
238,116,128, 30, 69,226,229,236,239,119,128, 30, 71,101, 3,136,
213,136,224,136,249,232,233,242,225,231,225,238, 97,128, 48,109,
235,225,244,225,235,225,238, 97,129, 48,205,136,237,232,225,236,
230,247,233,228,244,104,128,255,136,247,243,232,229,241,229,236,
243,233,231,110,128, 32,170,230,243,241,245,225,242,101,128, 51,
139,103, 2,137, 23,137, 73, 97, 3,137, 31,137, 41,137, 48,226,
229,238,231,225,236,105,128, 9,153,228,229,246, 97,128, 9, 25,
231,117, 2,137, 55,137, 64,234,225,242,225,244,105,128, 10,153,
242,237,245,235,232,105,128, 10, 25,239,238,231,245,244,232,225,
105,128, 14, 7,104, 2,137, 90,137,100,233,242,225,231,225,238,
97,128, 48,147,239,239,107, 2,137,108,137,115,236,229,230,116,
128, 2,114,242,229,244,242,239,230,236,229,120,128, 2,115,105,
4,137,137,138, 50,138, 61,138,119,229,245,110, 7,137,155,137,
190,137,222,137,236,137,245,138, 22,138, 35, 97, 2,137,161,137,
176,227,233,242,227,236,229,235,239,242,229,225,110,128, 50,111,
240,225,242,229,238,235,239,242,229,225,110,128, 50, 15,227,105,
2,137,197,137,209,229,245,227,235,239,242,229,225,110,128, 49,
53,242,227,236,229,235,239,242,229,225,110,128, 50, 97,232,233,
229,245,232,235,239,242,229,225,110,128, 49, 54,235,239,242,229,
225,110,128, 49, 52,240, 97, 2,137,252,138, 10,238,243,233,239,
243,235,239,242,229,225,110,128, 49,104,242,229,238,235,239,242,
229,225,110,128, 50, 1,243,233,239,243,235,239,242,229,225,110,
128, 49,103,244,233,235,229,245,244,235,239,242,229,225,110,128,
49,102,232,233,242,225,231,225,238, 97,128, 48,107,107, 2,138,
67,138, 91,225,244,225,235,225,238, 97,129, 48,203,138, 79,232,
225,236,230,247,233,228,244,104,128,255,134,232,225,232,233,116,
2,138,101,138,112,236,229,230,244,244,232,225,105,128,248,153,
244,232,225,105,128, 14, 77,238,101,141, 0, 57,138,150,138,159,
138,169,138,199,138,206,138,231,139, 2,139, 36,139, 48,139, 59,
139, 92,139,100,139,111,225,242,225,226,233, 99,128, 6,105,226,
229,238,231,225,236,105,128, 9,239,227,233,242,227,236,101,129,
36,104,138,180,233,238,246,229,242,243,229,243,225,238,243,243,
229,242,233,102,128, 39,146,228,229,246, 97,128, 9,111,231,117,
2,138,213,138,222,234,225,242,225,244,105,128, 10,239,242,237,
245,235,232,105,128, 10,111,232, 97, 2,138,238,138,249,227,235,
225,242,225,226,233, 99,128, 6,105,238,231,250,232,239,117,128,
48, 41,105, 2,139, 8,139, 26,228,229,239,231,242,225,240,232,
233,227,240,225,242,229,110,128, 50, 40,238,230,229,242,233,239,
114,128, 32,137,237,239,238,239,243,240,225,227,101,128,255, 25,
239,236,228,243,244,249,236,101,128,247, 57,112, 2,139, 65,139,
72,225,242,229,110,128, 36,124,229,114, 2,139, 79,139, 85,233,
239,100,128, 36,144,243,233,225,110,128, 6,249,242,239,237,225,
110,128, 33,120,243,245,240,229,242,233,239,114,128, 32,121,116,
2,139,117,139,155,229,229,110, 2,139,125,139,134,227,233,242,
227,236,101,128, 36,114,112, 2,139,140,139,147,225,242,229,110,
128, 36,134,229,242,233,239,100,128, 36,154,232,225,105,128, 14,
89,106,129, 1,204,139,167,229,227,249,242,233,236,236,233, 99,
128, 4, 90,235,225,244,225,235,225,238, 97,129, 48,243,139,192,
232,225,236,230,247,233,228,244,104,128,255,157,108, 2,139,210,
139,224,229,231,242,233,231,232,244,236,239,238,103,128, 1,158,
233,238,229,226,229,236,239,119,128, 30, 73,109, 2,139,241,139,
252,239,238,239,243,240,225,227,101,128,255, 78,243,241,245,225,
242,101,128, 51,154,110, 2,140, 11,140, 61, 97, 3,140, 19,140,
29,140, 36,226,229,238,231,225,236,105,128, 9,163,228,229,246,
97,128, 9, 35,231,117, 2,140, 43,140, 52,234,225,242,225,244,
105,128, 10,163,242,237,245,235,232,105,128, 10, 35,238,225,228,
229,246, 97,128, 9, 41,111, 6,140, 84,140, 95,140,120,140,161,
141,113,142, 40,232,233,242,225,231,225,238, 97,128, 48,110,235,
225,244,225,235,225,238, 97,129, 48,206,140,108,232,225,236,230,
247,233,228,244,104,128,255,137,110, 3,140,128,140,144,140,153,
226,242,229,225,235,233,238,231,243,240,225,227,101,128, 0,160,
229,238,244,232,225,105,128, 14, 19,245,244,232,225,105,128, 14,
25,239,110, 7,140,178,140,187,140,201,140,235,140,251,141, 36,
141, 95,225,242,225,226,233, 99,128, 6, 70,230,233,238,225,236,
225,242,225,226,233, 99,128,254,230,231,232,245,238,238, 97, 2,
140,212,140,221,225,242,225,226,233, 99,128, 6,186,230,233,238,
225,236,225,242,225,226,233, 99,128,251,159,233,238,233,244,233,
225,236,225,242,225,226,233, 99,128,254,231,234,229,229,237,105,
2,141, 5,141, 20,238,233,244,233,225,236,225,242,225,226,233,
99,128,252,210,243,239,236,225,244,229,228,225,242,225,226,233,
99,128,252, 75,237,101, 2,141, 43,141, 56,228,233,225,236,225,
242,225,226,233, 99,128,254,232,229,237,105, 2,141, 64,141, 79,
238,233,244,233,225,236,225,242,225,226,233, 99,128,252,213,243,
239,236,225,244,229,228,225,242,225,226,233, 99,128,252, 78,238,
239,239,238,230,233,238,225,236,225,242,225,226,233, 99,128,252,
141,116, 7,141,129,141,140,141,169,141,204,141,216,141,236,142,
6,227,239,238,244,225,233,238,115,128, 34, 12,101, 2,141,146,
141,162,236,229,237,229,238,116,129, 34, 9,141,157,239,102,128,
34, 9,241,245,225,108,128, 34, 96,231,242,229,225,244,229,114,
129, 34,111,141,181,238,239,114, 2,141,189,141,197,229,241,245,
225,108,128, 34,113,236,229,243,115,128, 34,121,233,228,229,238,
244,233,227,225,108,128, 34, 98,236,229,243,115,129, 34,110,141,
225,238,239,242,229,241,245,225,108,128, 34,112,112, 2,141,242,
141,252,225,242,225,236,236,229,108,128, 34, 38,242,229,227,229,
228,229,115,128, 34,128,243,117, 3,142, 15,142, 22,142, 31,226,
243,229,116,128, 34,132,227,227,229,229,228,115,128, 34,129,240,
229,242,243,229,116,128, 34,133,247,225,242,237,229,238,233,225,
110,128, 5,118,240,225,242,229,110,128, 36,169,115, 2,142, 66,
142, 75,243,241,245,225,242,101,128, 51,177,245,240,229,242,233,
239,114,128, 32,127,244,233,236,228,101,128, 0,241,117,132, 3,
189,142,105,142,116,142,197,143, 24,232,233,242,225,231,225,238,
97,128, 48,108,107, 2,142,122,142,146,225,244,225,235,225,238,
97,129, 48,204,142,134,232,225,236,230,247,233,228,244,104,128,
255,135,244, 97, 3,142,155,142,165,142,172,226,229,238,231,225,
236,105,128, 9,188,228,229,246, 97,128, 9, 60,231,117, 2,142,
179,142,188,234,225,242,225,244,105,128, 10,188,242,237,245,235,
232,105,128, 10, 60,109, 2,142,203,142,237,226,229,242,243,233,
231,110,130, 0, 35,142,217,142,229,237,239,238,239,243,240,225,
227,101,128,255, 3,243,237,225,236,108,128,254, 95,229,114, 2,
142,244,143, 20,225,236,243,233,231,110, 2,142,255,143, 7,231,
242,229,229,107,128, 3,116,236,239,247,229,242,231,242,229,229,
107,128, 3,117,111,128, 33, 22,110,130, 5,224,143, 32,143, 52,
228,225,231,229,243,104,129,251, 64,143, 43,232,229,226,242,229,
119,128,251, 64,232,229,226,242,229,119,128, 5,224,246,243,241,
245,225,242,101,128, 51,181,247,243,241,245,225,242,101,128, 51,
187,249, 97, 3,143, 90,143,100,143,107,226,229,238,231,225,236,
105,128, 9,158,228,229,246, 97,128, 9, 30,231,117, 2,143,114,
143,123,234,225,242,225,244,105,128, 10,158,242,237,245,235,232,
105,128, 10, 30,111,147, 0,111,143,174,143,196,144, 18,144,188,
145, 4,145, 19,145, 59,145,182,145,203,145,241,145,252,146,174,
148, 8,148, 72,148,105,148,151,149, 24,149, 71,149, 83, 97, 2,
143,180,143,187,227,245,244,101,128, 0,243,238,231,244,232,225,
105,128, 14, 45, 98, 4,143,206,143,248,144, 1,144, 11,225,242,
242,229,100,130, 2,117,143,218,143,229,227,249,242,233,236,236,
233, 99,128, 4,233,228,233,229,242,229,243,233,243,227,249,242,
233,236,236,233, 99,128, 4,235,229,238,231,225,236,105,128, 9,
147,239,240,239,237,239,230,111,128, 49, 27,242,229,246,101,128,
1, 79, 99, 3,144, 26,144, 99,144,178, 97, 2,144, 32,144, 93,
238,228,242, 97, 3,144, 43,144, 50,144, 61,228,229,246, 97,128,
9, 17,231,245,234,225,242,225,244,105,128, 10,145,246,239,247,
229,236,243,233,231,110, 2,144, 75,144, 82,228,229,246, 97,128,
9, 73,231,245,234,225,242,225,244,105,128, 10,201,242,239,110,
128, 1,210,233,242, 99, 2,144,107,144,112,236,101,128, 36,222,
245,237,230,236,229,120,133, 0,244,144,131,144,139,144,150,144,
158,144,170,225,227,245,244,101,128, 30,209,228,239,244,226,229,
236,239,119,128, 30,217,231,242,225,246,101,128, 30,211,232,239,
239,235,225,226,239,246,101,128, 30,213,244,233,236,228,101,128,
30,215,249,242,233,236,236,233, 99,128, 4, 62,100, 4,144,198,
144,221,144,227,144,250,226,108, 2,144,205,144,213,225,227,245,
244,101,128, 1, 81,231,242,225,246,101,128, 2, 13,229,246, 97,
128, 9, 19,233,229,242,229,243,233,115,129, 0,246,144,239,227,
249,242,233,236,236,233, 99,128, 4,231,239,244,226,229,236,239,
119,128, 30,205,101,129, 1, 83,145, 10,235,239,242,229,225,110,
128, 49, 90,103, 3,145, 27,145, 42,145, 49,239,238,229,107,129,
2,219,145, 36,227,237, 98,128, 3, 40,242,225,246,101,128, 0,
242,245,234,225,242,225,244,105,128, 10,147,104, 4,145, 69,145,
80,145, 90,145,168,225,242,237,229,238,233,225,110,128, 5,133,
233,242,225,231,225,238, 97,128, 48, 74,111, 2,145, 96,145,106,
239,235,225,226,239,246,101,128, 30,207,242,110,133, 1,161,145,
121,145,129,145,140,145,148,145,160,225,227,245,244,101,128, 30,
219,228,239,244,226,229,236,239,119,128, 30,227,231,242,225,246,
101,128, 30,221,232,239,239,235,225,226,239,246,101,128, 30,223,
244,233,236,228,101,128, 30,225,245,238,231,225,242,245,237,236,
225,245,116,128, 1, 81,105,129, 1,163,145,188,238,246,229,242,
244,229,228,226,242,229,246,101,128, 2, 15,107, 2,145,209,145,
233,225,244,225,235,225,238, 97,129, 48,170,145,221,232,225,236,
230,247,233,228,244,104,128,255,117,239,242,229,225,110,128, 49,
87,236,229,232,229,226,242,229,119,128, 5,171,109, 6,146, 10,
146, 38,146, 45,146,134,146,145,146,163,225,227,242,239,110,130,
1, 77,146, 22,146, 30,225,227,245,244,101,128, 30, 83,231,242,
225,246,101,128, 30, 81,228,229,246, 97,128, 9, 80,229,231, 97,
133, 3,201,146, 61,146, 65,146, 76,146, 90,146,106, 49,128, 3,
214,227,249,242,233,236,236,233, 99,128, 4, 97,236,225,244,233,
238,227,236,239,243,229,100,128, 2,119,242,239,245,238,228,227,
249,242,233,236,236,233, 99,128, 4,123,116, 2,146,112,146,127,
233,244,236,239,227,249,242,233,236,236,233, 99,128, 4,125,239,
238,239,115,128, 3,206,231,245,234,225,242,225,244,105,128, 10,
208,233,227,242,239,110,129, 3,191,146,155,244,239,238,239,115,
128, 3,204,239,238,239,243,240,225,227,101,128,255, 79,238,101,
145, 0, 49,146,213,146,222,146,232,147, 6,147, 31,147, 40,147,
49,147, 74,147,108,147,142,147,154,147,173,147,184,147,217,147,
227,147,235,147,246,225,242,225,226,233, 99,128, 6, 97,226,229,
238,231,225,236,105,128, 9,231,227,233,242,227,236,101,129, 36,
96,146,243,233,238,246,229,242,243,229,243,225,238,243,243,229,
242,233,102,128, 39,138,100, 2,147, 12,147, 18,229,246, 97,128,
9,103,239,244,229,238,236,229,225,228,229,114,128, 32, 36,229,
233,231,232,244,104,128, 33, 91,230,233,244,244,229,100,128,246,
220,231,117, 2,147, 56,147, 65,234,225,242,225,244,105,128, 10,
231,242,237,245,235,232,105,128, 10,103,232, 97, 3,147, 83,147,
94,147, 99,227,235,225,242,225,226,233, 99,128, 6, 97,236,102,
128, 0,189,238,231,250,232,239,117,128, 48, 33,105, 2,147,114,
147,132,228,229,239,231,242,225,240,232,233,227,240,225,242,229,
110,128, 50, 32,238,230,229,242,233,239,114,128, 32,129,237,239,
238,239,243,240,225,227,101,128,255, 17,238,245,237,229,242,225,
244,239,242,226,229,238,231,225,236,105,128, 9,244,239,236,228,
243,244,249,236,101,128,247, 49,112, 2,147,190,147,197,225,242,
229,110,128, 36,116,229,114, 2,147,204,147,210,233,239,100,128,
36,136,243,233,225,110,128, 6,241,241,245,225,242,244,229,114,
128, 0,188,242,239,237,225,110,128, 33,112,243,245,240,229,242,
233,239,114,128, 0,185,244,104, 2,147,253,148, 2,225,105,128,
14, 81,233,242,100,128, 33, 83,111, 3,148, 16,148, 50,148, 66,
103, 2,148, 22,148, 40,239,238,229,107,129, 1,235,148, 31,237,
225,227,242,239,110,128, 1,237,245,242,237,245,235,232,105,128,
10, 19,237,225,244,242,225,231,245,242,237,245,235,232,105,128,
10, 75,240,229,110,128, 2, 84,112, 3,148, 80,148, 87,148, 98,
225,242,229,110,128, 36,170,229,238,226,245,236,236,229,116,128,
37,230,244,233,239,110,128, 35, 37,114, 2,148,111,148,140,100,
2,148,117,148,128,230,229,237,233,238,233,238,101,128, 0,170,
237,225,243,227,245,236,233,238,101,128, 0,186,244,232,239,231,
239,238,225,108,128, 34, 31,115, 5,148,163,148,195,148,212,149,
1,149, 14,232,239,242,116, 2,148,172,148,179,228,229,246, 97,
128, 9, 18,246,239,247,229,236,243,233,231,238,228,229,246, 97,
128, 9, 74,236,225,243,104,129, 0,248,148,204,225,227,245,244,
101,128, 1,255,237,225,236,108, 2,148,221,148,232,232,233,242,
225,231,225,238, 97,128, 48, 73,235,225,244,225,235,225,238, 97,
129, 48,169,148,245,232,225,236,230,247,233,228,244,104,128,255,
107,244,242,239,235,229,225,227,245,244,101,128, 1,255,245,240,
229,242,233,239,114,128,246,240,116, 2,149, 30,149, 41,227,249,
242,233,236,236,233, 99,128, 4,127,233,236,228,101,130, 0,245,
149, 52,149, 60,225,227,245,244,101,128, 30, 77,228,233,229,242,
229,243,233,115,128, 30, 79,245,226,239,240,239,237,239,230,111,
128, 49, 33,118, 2,149, 89,149,170,229,114, 2,149, 96,149,162,
236,233,238,101,131, 32, 62,149,109,149,132,149,155, 99, 2,149,
115,149,127,229,238,244,229,242,236,233,238,101,128,254, 74,237,
98,128, 3, 5,100, 2,149,138,149,146,225,243,232,229,100,128,
254, 73,226,236,247,225,246,121,128,254, 76,247,225,246,121,128,
254, 75,243,227,239,242,101,128, 0,175,239,247,229,236,243,233,
231,110, 3,149,185,149,195,149,202,226,229,238,231,225,236,105,
128, 9,203,228,229,246, 97,128, 9, 75,231,245,234,225,242,225,
244,105,128, 10,203,112,145, 0,112,149,251,152,123,152,134,152,
143,152,155,154, 80,154, 90,155, 82,156,101,156,191,156,217,157,
92,157,100,158, 2,158, 60,158, 88,158, 98, 97, 14,150, 25,150,
57,150, 67,150, 74,150, 81,150,129,150,140,150,154,150,165,150,
212,150,226,151,238,152, 21,152,111, 97, 2,150, 31,150, 43,237,
240,243,243,241,245,225,242,101,128, 51,128,243,229,238,244,239,
243,241,245,225,242,101,128, 51, 43,226,229,238,231,225,236,105,
128, 9,170,227,245,244,101,128, 30, 85,228,229,246, 97,128, 9,
42,103, 2,150, 87,150,105,101, 2,150, 93,150,100,228,239,247,
110,128, 33,223,245,112,128, 33,222,117, 2,150,111,150,120,234,
225,242,225,244,105,128, 10,170,242,237,245,235,232,105,128, 10,
42,232,233,242,225,231,225,238, 97,128, 48,113,233,249,225,238,
238,239,233,244,232,225,105,128, 14, 47,235,225,244,225,235,225,
238, 97,128, 48,209,108, 2,150,171,150,196,225,244,225,236,233,
250,225,244,233,239,238,227,249,242,233,236,236,233,227,227,237,
98,128, 4,132,239,227,232,235,225,227,249,242,233,236,236,233,
99,128, 4,192,238,243,233,239,243,235,239,242,229,225,110,128,
49,127,114, 3,150,234,150,255,151,227, 97, 2,150,240,150,248,
231,242,225,240,104,128, 0,182,236,236,229,108,128, 34, 37,229,
110, 2,151, 6,151,116,236,229,230,116,136, 0, 40,151, 29,151,
44,151, 49,151, 54,151, 65,151, 77,151,100,151,105,225,236,244,
239,238,229,225,242,225,226,233, 99,128,253, 62,226,116,128,248,
237,229,120,128,248,236,233,238,230,229,242,233,239,114,128, 32,
141,237,239,238,239,243,240,225,227,101,128,255, 8,115, 2,151,
83,151, 90,237,225,236,108,128,254, 89,245,240,229,242,233,239,
114,128, 32,125,244,112,128,248,235,246,229,242,244,233,227,225,
108,128,254, 53,242,233,231,232,116,136, 0, 41,151,140,151,155,
151,160,151,165,151,176,151,188,151,211,151,216,225,236,244,239,
238,229,225,242,225,226,233, 99,128,253, 63,226,116,128,248,248,
229,120,128,248,247,233,238,230,229,242,233,239,114,128, 32,142,
237,239,238,239,243,240,225,227,101,128,255, 9,115, 2,151,194,
151,201,237,225,236,108,128,254, 90,245,240,229,242,233,239,114,
128, 32,126,244,112,128,248,246,246,229,242,244,233,227,225,108,
128,254, 54,244,233,225,236,228,233,230,102,128, 34, 2,115, 3,
151,246,152, 1,152, 13,229,241,232,229,226,242,229,119,128, 5,
192,232,244,225,232,229,226,242,229,119,128, 5,153,241,245,225,
242,101,128, 51,169,244,225,104,134, 5,183,152, 39,152, 53,152,
58,152, 67,152, 82,152, 98, 49, 2,152, 45,152, 49, 49,128, 5,
183,100,128, 5,183,178, 97,128, 5,183,232,229,226,242,229,119,
128, 5,183,238,225,242,242,239,247,232,229,226,242,229,119,128,
5,183,241,245,225,242,244,229,242,232,229,226,242,229,119,128,
5,183,247,233,228,229,232,229,226,242,229,119,128, 5,183,250,
229,242,232,229,226,242,229,119,128, 5,161,226,239,240,239,237,
239,230,111,128, 49, 6,227,233,242,227,236,101,128, 36,223,228,
239,244,225,227,227,229,238,116,128, 30, 87,101,137, 5,228,152,
177,152,188,152,208,152,220,152,240,153, 86,153, 97,153,118,154,
73,227,249,242,233,236,236,233, 99,128, 4, 63,228,225,231,229,
243,104,129,251, 68,152,199,232,229,226,242,229,119,128,251, 68,
229,250,233,243,241,245,225,242,101,128, 51, 59,230,233,238,225,
236,228,225,231,229,243,232,232,229,226,242,229,119,128,251, 67,
104, 5,152,252,153, 19,153, 27,153, 41,153, 71,225,114, 2,153,
3,153, 10,225,226,233, 99,128, 6,126,237,229,238,233,225,110,
128, 5,122,229,226,242,229,119,128, 5,228,230,233,238,225,236,
225,242,225,226,233, 99,128,251, 87,105, 2,153, 47,153, 62,238,
233,244,233,225,236,225,242,225,226,233, 99,128,251, 88,242,225,
231,225,238, 97,128, 48,122,237,229,228,233,225,236,225,242,225,
226,233, 99,128,251, 89,235,225,244,225,235,225,238, 97,128, 48,
218,237,233,228,228,236,229,232,239,239,235,227,249,242,233,236,
236,233, 99,128, 4,167,114, 5,153,130,153,142,153,184,154, 49,
154, 62,225,230,229,232,229,226,242,229,119,128,251, 78,227,229,
238,116,131, 0, 37,153,155,153,164,153,176,225,242,225,226,233,
99,128, 6,106,237,239,238,239,243,240,225,227,101,128,255, 5,
243,237,225,236,108,128,254,106,105, 2,153,190,154, 31,239,100,
134, 0, 46,153,207,153,218,153,229,153,241,153,252,154, 8,225,
242,237,229,238,233,225,110,128, 5,137,227,229,238,244,229,242,
229,100,128, 0,183,232,225,236,230,247,233,228,244,104,128,255,
97,233,238,230,229,242,233,239,114,128,246,231,237,239,238,239,
243,240,225,227,101,128,255, 14,115, 2,154, 14,154, 21,237,225,
236,108,128,254, 82,245,240,229,242,233,239,114,128,246,232,243,
240,239,237,229,238,233,231,242,229,229,235,227,237, 98,128, 3,
66,240,229,238,228,233,227,245,236,225,114,128, 34,165,244,232,
239,245,243,225,238,100,128, 32, 48,243,229,244, 97,128, 32,167,
230,243,241,245,225,242,101,128, 51,138,104, 3,154, 98,154,148,
155, 29, 97, 3,154,106,154,116,154,123,226,229,238,231,225,236,
105,128, 9,171,228,229,246, 97,128, 9, 43,231,117, 2,154,130,
154,139,234,225,242,225,244,105,128, 10,171,242,237,245,235,232,
105,128, 10, 43,105,133, 3,198,154,162,154,166,154,252,155, 4,
155, 15, 49,128, 3,213,229,245,240,104, 4,154,179,154,214,154,
229,154,238, 97, 2,154,185,154,200,227,233,242,227,236,229,235,
239,242,229,225,110,128, 50,122,240,225,242,229,238,235,239,242,
229,225,110,128, 50, 26,227,233,242,227,236,229,235,239,242,229,
225,110,128, 50,108,235,239,242,229,225,110,128, 49, 77,240,225,
242,229,238,235,239,242,229,225,110,128, 50, 12,236,225,244,233,
110,128, 2,120,238,244,232,245,244,232,225,105,128, 14, 58,243,
249,237,226,239,236,231,242,229,229,107,128, 3,213,111, 3,155,
37,155, 42,155, 68,239,107,128, 1,165,240,104, 2,155, 49,155,
58,225,238,244,232,225,105,128, 14, 30,245,238,231,244,232,225,
105,128, 14, 28,243,225,237,240,232,225,239,244,232,225,105,128,
14, 32,105,133, 3,192,155, 96,156, 52,156, 63,156, 74,156, 88,
229,245,112, 6,155,112,155,147,155,179,155,207,155,221,156, 17,
97, 2,155,118,155,133,227,233,242,227,236,229,235,239,242,229,
225,110,128, 50,115,240,225,242,229,238,235,239,242,229,225,110,
128, 50, 19,227,105, 2,155,154,155,166,229,245,227,235,239,242,
229,225,110,128, 49,118,242,227,236,229,235,239,242,229,225,110,
128, 50,101,107, 2,155,185,155,199,233,249,229,239,235,235,239,
242,229,225,110,128, 49,114,239,242,229,225,110,128, 49, 66,240,
225,242,229,238,235,239,242,229,225,110,128, 50, 5,243,233,239,
115, 2,155,230,156, 2,107, 2,155,236,155,250,233,249,229,239,
235,235,239,242,229,225,110,128, 49,116,239,242,229,225,110,128,
49, 68,244,233,235,229,245,244,235,239,242,229,225,110,128, 49,
117,116, 2,156, 23,156, 38,232,233,229,245,244,232,235,239,242,
229,225,110,128, 49,119,233,235,229,245,244,235,239,242,229,225,
110,128, 49,115,232,233,242,225,231,225,238, 97,128, 48,116,235,
225,244,225,235,225,238, 97,128, 48,212,243,249,237,226,239,236,
231,242,229,229,107,128, 3,214,247,242,225,242,237,229,238,233,
225,110,128, 5,131,236,245,115,132, 0, 43,156,115,156,126,156,
135,156,168,226,229,236,239,247,227,237, 98,128, 3, 31,227,233,
242,227,236,101,128, 34,149,109, 2,156,141,156,148,233,238,245,
115,128, 0,177,111, 2,156,154,156,158,100,128, 2,214,238,239,
243,240,225,227,101,128,255, 11,115, 2,156,174,156,181,237,225,
236,108,128,254, 98,245,240,229,242,233,239,114,128, 32,122,109,
2,156,197,156,208,239,238,239,243,240,225,227,101,128,255, 80,
243,241,245,225,242,101,128, 51,216,111, 5,156,229,156,240,157,
51,157, 62,157, 72,232,233,242,225,231,225,238, 97,128, 48,125,
233,238,244,233,238,231,233,238,228,229,120, 4,157, 4,157, 16,
157, 28,157, 41,228,239,247,238,247,232,233,244,101,128, 38, 31,
236,229,230,244,247,232,233,244,101,128, 38, 28,242,233,231,232,
244,247,232,233,244,101,128, 38, 30,245,240,247,232,233,244,101,
128, 38, 29,235,225,244,225,235,225,238, 97,128, 48,221,240,236,
225,244,232,225,105,128, 14, 27,243,244,225,236,237,225,242,107,
129, 48, 18,157, 85,230,225,227,101,128, 48, 32,240,225,242,229,
110,128, 36,171,114, 3,157,108,157,134,157,159,101, 2,157,114,
157,122,227,229,228,229,115,128, 34,122,243,227,242,233,240,244,
233,239,110,128, 33, 30,233,237,101, 2,157,142,157,148,237,239,
100,128, 2,185,242,229,246,229,242,243,229,100,128, 32, 53,111,
4,157,169,157,176,157,186,157,199,228,245,227,116,128, 34, 15,
234,229,227,244,233,246,101,128, 35, 5,236,239,238,231,229,228,
235,225,238, 97,128, 48,252,112, 2,157,205,157,242,101, 2,157,
211,157,218,236,236,239,114,128, 35, 24,242,243,117, 2,157,226,
157,233,226,243,229,116,128, 34,130,240,229,242,243,229,116,128,
34,131,239,242,244,233,239,110,129, 34, 55,157,253,225,108,128,
34, 29,115, 2,158, 8,158, 51,105,130, 3,200,158, 16,158, 27,
227,249,242,233,236,236,233, 99,128, 4,113,236,233,240,238,229,
245,237,225,244,225,227,249,242,233,236,236,233,227,227,237, 98,
128, 4,134,243,241,245,225,242,101,128, 51,176,117, 2,158, 66,
158, 77,232,233,242,225,231,225,238, 97,128, 48,119,235,225,244,
225,235,225,238, 97,128, 48,215,246,243,241,245,225,242,101,128,
51,180,247,243,241,245,225,242,101,128, 51,186,113,136, 0,113,
158,128,159,177,159,188,159,197,159,204,159,216,159,254,160, 6,
97, 4,158,138,158,161,158,225,159,160,100, 2,158,144,158,150,
229,246, 97,128, 9, 88,237,225,232,229,226,242,229,119,128, 5,
168,102, 4,158,171,158,180,158,194,158,210,225,242,225,226,233,
99,128, 6, 66,230,233,238,225,236,225,242,225,226,233, 99,128,
254,214,233,238,233,244,233,225,236,225,242,225,226,233, 99,128,
254,215,237,229,228,233,225,236,225,242,225,226,233, 99,128,254,
216,237,225,244,115,136, 5,184,158,248,159, 12,159, 26,159, 31,
159, 36,159, 45,159, 60,159,147, 49, 3,159, 0,159, 4,159, 8,
48,128, 5,184, 97,128, 5,184, 99,128, 5,184, 50, 2,159, 18,
159, 22, 55,128, 5,184, 57,128, 5,184,179, 51,128, 5,184,228,
101,128, 5,184,232,229,226,242,229,119,128, 5,184,238,225,242,
242,239,247,232,229,226,242,229,119,128, 5,184,113, 2,159, 66,
159,132,225,244,225,110, 4,159, 79,159, 88,159,103,159,119,232,
229,226,242,229,119,128, 5,184,238,225,242,242,239,247,232,229,
226,242,229,119,128, 5,184,241,245,225,242,244,229,242,232,229,
226,242,229,119,128, 5,184,247,233,228,229,232,229,226,242,229,
119,128, 5,184,245,225,242,244,229,242,232,229,226,242,229,119,
128, 5,184,247,233,228,229,232,229,226,242,229,119,128, 5,184,
242,238,229,249,240,225,242,225,232,229,226,242,229,119,128, 5,
159,226,239,240,239,237,239,230,111,128, 49, 17,227,233,242,227,
236,101,128, 36,224,232,239,239,107,128, 2,160,237,239,238,239,
243,240,225,227,101,128,255, 81,239,102,130, 5,231,159,225,159,
245,228,225,231,229,243,104,129,251, 71,159,236,232,229,226,242,
229,119,128,251, 71,232,229,226,242,229,119,128, 5,231,240,225,
242,229,110,128, 36,172,117, 4,160, 16,160, 28,160,117,160,204,
225,242,244,229,242,238,239,244,101,128, 38,105,226,245,244,115,
135, 5,187,160, 49,160, 54,160, 59,160, 64,160, 73,160, 88,160,
104,177, 56,128, 5,187,178, 53,128, 5,187,179, 49,128, 5,187,
232,229,226,242,229,119,128, 5,187,238,225,242,242,239,247,232,
229,226,242,229,119,128, 5,187,241,245,225,242,244,229,242,232,
229,226,242,229,119,128, 5,187,247,233,228,229,232,229,226,242,
229,119,128, 5,187,229,243,244,233,239,110,133, 0, 63,160,136,
160,159,160,176,160,184,160,196,225,114, 2,160,143,160,150,225,
226,233, 99,128, 6, 31,237,229,238,233,225,110,128, 5, 94,228,
239,247,110,129, 0,191,160,168,243,237,225,236,108,128,247,191,
231,242,229,229,107,128, 3,126,237,239,238,239,243,240,225,227,
101,128,255, 31,243,237,225,236,108,128,247, 63,239,244,101, 4,
160,216,161, 31,161, 51,161, 80,228,226,108,133, 0, 34,160,232,
160,239,160,246,161, 2,161, 23,226,225,243,101,128, 32, 30,236,
229,230,116,128, 32, 28,237,239,238,239,243,240,225,227,101,128,
255, 2,240,242,233,237,101,129, 48, 30,161, 12,242,229,246,229,
242,243,229,100,128, 48, 29,242,233,231,232,116,128, 32, 29,236,
229,230,116,129, 32, 24,161, 40,242,229,246,229,242,243,229,100,
128, 32, 27,114, 2,161, 57,161, 67,229,246,229,242,243,229,100,
128, 32, 27,233,231,232,116,129, 32, 25,161, 76,110,128, 1, 73,
243,233,238,231,108, 2,161, 90,161, 97,226,225,243,101,128, 32,
26,101,129, 0, 39,161,103,237,239,238,239,243,240,225,227,101,
128,255, 7,114,145, 0,114,161,153,162,157,162,168,162,215,163,
10,164, 27,164, 51,164,146,166,180,166,217,166,229,167, 27,167,
35,167,197,167,208,167,243,168, 87, 97, 11,161,177,161,188,161,
198,161,205,162, 14,162, 30,162, 55,162, 66,162, 91,162,114,162,
151,225,242,237,229,238,233,225,110,128, 5,124,226,229,238,231,
225,236,105,128, 9,176,227,245,244,101,128, 1, 85,100, 4,161,
215,161,221,161,235,162, 5,229,246, 97,128, 9, 48,233,227,225,
108,129, 34, 26,161,230,229,120,128,248,229,239,246,229,242,243,
243,241,245,225,242,101,129, 51,174,161,251,228,243,241,245,225,
242,101,128, 51,175,243,241,245,225,242,101,128, 51,173,230,101,
129, 5,191,162, 21,232,229,226,242,229,119,128, 5,191,231,117,
2,162, 37,162, 46,234,225,242,225,244,105,128, 10,176,242,237,
245,235,232,105,128, 10, 48,232,233,242,225,231,225,238, 97,128,
48,137,235,225,244,225,235,225,238, 97,129, 48,233,162, 79,232,
225,236,230,247,233,228,244,104,128,255,151,236,239,247,229,242,
228,233,225,231,239,238,225,236,226,229,238,231,225,236,105,128,
9,241,109, 2,162,120,162,143,233,228,228,236,229,228,233,225,
231,239,238,225,236,226,229,238,231,225,236,105,128, 9,240,243,
232,239,242,110,128, 2,100,244,233,111,128, 34, 54,226,239,240,
239,237,239,230,111,128, 49, 22, 99, 4,162,178,162,185,162,194,
162,202,225,242,239,110,128, 1, 89,229,228,233,236,236, 97,128,
1, 87,233,242,227,236,101,128, 36,225,239,237,237,225,225,227,
227,229,238,116,128, 1, 87,100, 2,162,221,162,231,226,236,231,
242,225,246,101,128, 2, 17,239,116, 2,162,238,162,247,225,227,
227,229,238,116,128, 30, 89,226,229,236,239,119,129, 30, 91,163,
1,237,225,227,242,239,110,128, 30, 93,101, 6,163, 24,163, 69,
163,104,163,159,163,184,163,217,102, 2,163, 30,163, 43,229,242,
229,238,227,229,237,225,242,107,128, 32, 59,236,229,248,243,117,
2,163, 53,163, 60,226,243,229,116,128, 34,134,240,229,242,243,
229,116,128, 34,135,231,233,243,244,229,114, 2,163, 80,163, 85,
229,100,128, 0,174,115, 2,163, 91,163, 97,225,238,115,128,248,
232,229,242,233,102,128,246,218,104, 3,163,112,163,135,163,149,
225,114, 2,163,119,163,126,225,226,233, 99,128, 6, 49,237,229,
238,233,225,110,128, 5,128,230,233,238,225,236,225,242,225,226,
233, 99,128,254,174,233,242,225,231,225,238, 97,128, 48,140,235,
225,244,225,235,225,238, 97,129, 48,236,163,172,232,225,236,230,
247,233,228,244,104,128,255,154,243,104,130, 5,232,163,193,163,
208,228,225,231,229,243,232,232,229,226,242,229,119,128,251, 72,
232,229,226,242,229,119,128, 5,232,118, 3,163,225,163,238,164,
14,229,242,243,229,228,244,233,236,228,101,128, 34, 61,233, 97,
2,163,245,163,254,232,229,226,242,229,119,128, 5,151,237,245,
231,242,225,243,232,232,229,226,242,229,119,128, 5,151,236,239,
231,233,227,225,236,238,239,116,128, 35, 16,230,233,243,232,232,
239,239,107,129, 2,126,164, 40,242,229,246,229,242,243,229,100,
128, 2,127,104, 2,164, 57,164, 80, 97, 2,164, 63,164, 73,226,
229,238,231,225,236,105,128, 9,221,228,229,246, 97,128, 9, 93,
111,131, 3,193,164, 90,164,119,164,133,239,107,129, 2,125,164,
97,244,245,242,238,229,100,129, 2,123,164,108,243,245,240,229,
242,233,239,114,128, 2,181,243,249,237,226,239,236,231,242,229,
229,107,128, 3,241,244,233,227,232,239,239,235,237,239,100,128,
2,222,105, 6,164,160,165,204,165,250,166, 5,166, 30,166,166,
229,245,108, 9,164,182,164,217,164,232,164,246,165, 36,165, 50,
165,136,165,149,165,184, 97, 2,164,188,164,203,227,233,242,227,
236,229,235,239,242,229,225,110,128, 50,113,240,225,242,229,238,
235,239,242,229,225,110,128, 50, 17,227,233,242,227,236,229,235,
239,242,229,225,110,128, 50, 99,232,233,229,245,232,235,239,242,
229,225,110,128, 49, 64,107, 2,164,252,165, 28,233,249,229,239,
107, 2,165, 6,165, 15,235,239,242,229,225,110,128, 49, 58,243,
233,239,243,235,239,242,229,225,110,128, 49,105,239,242,229,225,
110,128, 49, 57,237,233,229,245,237,235,239,242,229,225,110,128,
49, 59,112, 3,165, 58,165, 90,165,105, 97, 2,165, 64,165, 78,
238,243,233,239,243,235,239,242,229,225,110,128, 49,108,242,229,
238,235,239,242,229,225,110,128, 50, 3,232,233,229,245,240,232,
235,239,242,229,225,110,128, 49, 63,233,229,245,112, 2,165,114,
165,123,235,239,242,229,225,110,128, 49, 60,243,233,239,243,235,
239,242,229,225,110,128, 49,107,243,233,239,243,235,239,242,229,
225,110,128, 49, 61,116, 2,165,155,165,170,232,233,229,245,244,
232,235,239,242,229,225,110,128, 49, 62,233,235,229,245,244,235,
239,242,229,225,110,128, 49,106,249,229,239,242,233,238,232,233,
229,245,232,235,239,242,229,225,110,128, 49,109,231,232,116, 2,
165,212,165,220,225,238,231,236,101,128, 34, 31,116, 2,165,226,
165,240,225,227,235,226,229,236,239,247,227,237, 98,128, 3, 25,
242,233,225,238,231,236,101,128, 34,191,232,233,242,225,231,225,
238, 97,128, 48,138,235,225,244,225,235,225,238, 97,129, 48,234,
166, 18,232,225,236,230,247,233,228,244,104,128,255,152,110, 2,
166, 36,166,152,103,131, 2,218,166, 46,166, 57,166, 63,226,229,
236,239,247,227,237, 98,128, 3, 37,227,237, 98,128, 3, 10,232,
225,236,102, 2,166, 72,166,118,236,229,230,116,131, 2,191,166,
85,166, 96,166,107,225,242,237,229,238,233,225,110,128, 5, 89,
226,229,236,239,247,227,237, 98,128, 3, 28,227,229,238,244,229,
242,229,100,128, 2,211,242,233,231,232,116,130, 2,190,166,130,
166,141,226,229,236,239,247,227,237, 98,128, 3, 57,227,229,238,
244,229,242,229,100,128, 2,210,246,229,242,244,229,228,226,242,
229,246,101,128, 2, 19,244,244,239,242,245,243,241,245,225,242,
101,128, 51, 81,108, 2,166,186,166,197,233,238,229,226,229,236,
239,119,128, 30, 95,239,238,231,236,229,103,129, 2,124,166,208,
244,245,242,238,229,100,128, 2,122,237,239,238,239,243,240,225,
227,101,128,255, 82,111, 3,166,237,166,248,167, 17,232,233,242,
225,231,225,238, 97,128, 48,141,235,225,244,225,235,225,238, 97,
129, 48,237,167, 5,232,225,236,230,247,233,228,244,104,128,255,
155,242,245,225,244,232,225,105,128, 14, 35,240,225,242,229,110,
128, 36,173,114, 3,167, 43,167, 79,167,109, 97, 3,167, 51,167,
61,167, 68,226,229,238,231,225,236,105,128, 9,220,228,229,246,
97,128, 9, 49,231,245,242,237,245,235,232,105,128, 10, 92,229,
104, 2,167, 86,167, 95,225,242,225,226,233, 99,128, 6,145,230,
233,238,225,236,225,242,225,226,233, 99,128,251,141,246,239,227,
225,236,233, 99, 4,167,125,167,135,167,142,167,153,226,229,238,
231,225,236,105,128, 9,224,228,229,246, 97,128, 9, 96,231,245,
234,225,242,225,244,105,128, 10,224,246,239,247,229,236,243,233,
231,110, 3,167,169,167,179,167,186,226,229,238,231,225,236,105,
128, 9,196,228,229,246, 97,128, 9, 68,231,245,234,225,242,225,
244,105,128, 10,196,243,245,240,229,242,233,239,114,128,246,241,
116, 2,167,214,167,222,226,236,239,227,107,128, 37,144,245,242,
238,229,100,129, 2,121,167,232,243,245,240,229,242,233,239,114,
128, 2,180,117, 4,167,253,168, 8,168, 33,168, 80,232,233,242,
225,231,225,238, 97,128, 48,139,235,225,244,225,235,225,238, 97,
129, 48,235,168, 21,232,225,236,230,247,233,228,244,104,128,255,
153,112, 2,168, 39,168, 74,229,101, 2,168, 46,168, 60,237,225,
242,235,226,229,238,231,225,236,105,128, 9,242,243,233,231,238,
226,229,238,231,225,236,105,128, 9,243,233,225,104,128,246,221,
244,232,225,105,128, 14, 36,246,239,227,225,236,233, 99, 4,168,
103,168,113,168,120,168,131,226,229,238,231,225,236,105,128, 9,
139,228,229,246, 97,128, 9, 11,231,245,234,225,242,225,244,105,
128, 10,139,246,239,247,229,236,243,233,231,110, 3,168,147,168,
157,168,164,226,229,238,231,225,236,105,128, 9,195,228,229,246,
97,128, 9, 67,231,245,234,225,242,225,244,105,128, 10,195,115,
147, 0,115,168,217,170,187,170,198,171, 68,171,107,174, 49,174,
60,176,203,179, 85,179,131,179,158,180, 93,180,160,181,193,181,
203,182,133,182,206,183,120,183,130, 97, 9,168,237,168,247,169,
12,169, 84,169,109,169,120,169,145,169,177,169,217,226,229,238,
231,225,236,105,128, 9,184,227,245,244,101,129, 1, 91,169, 0,
228,239,244,225,227,227,229,238,116,128, 30,101,100, 5,169, 24,
169, 33,169, 39,169, 53,169, 69,225,242,225,226,233, 99,128, 6,
53,229,246, 97,128, 9, 56,230,233,238,225,236,225,242,225,226,
233, 99,128,254,186,233,238,233,244,233,225,236,225,242,225,226,
233, 99,128,254,187,237,229,228,233,225,236,225,242,225,226,233,
99,128,254,188,231,117, 2,169, 91,169,100,234,225,242,225,244,
105,128, 10,184,242,237,245,235,232,105,128, 10, 56,232,233,242,
225,231,225,238, 97,128, 48, 85,235,225,244,225,235,225,238, 97,
129, 48,181,169,133,232,225,236,230,247,233,228,244,104,128,255,
123,236,236,225,236,236,225,232,239,245,225,236,225,249,232,229,
247,225,243,225,236,236,225,237,225,242,225,226,233, 99,128,253,
250,237,229,235,104,130, 5,225,169,188,169,208,228,225,231,229,
243,104,129,251, 65,169,199,232,229,226,242,229,119,128,251, 65,
232,229,226,242,229,119,128, 5,225,242, 97, 5,169,230,170, 48,
170, 56,170,106,170,114, 97, 5,169,242,169,250,170, 2,170, 33,
170, 41,225,244,232,225,105,128, 14, 50,229,244,232,225,105,128,
14, 65,233,237,225,233,109, 2,170, 12,170, 23,225,236,225,233,
244,232,225,105,128, 14, 68,245,225,238,244,232,225,105,128, 14,
67,237,244,232,225,105,128, 14, 51,244,232,225,105,128, 14, 48,
229,244,232,225,105,128, 14, 64,105, 3,170, 64,170, 88,170, 99,
105, 2,170, 70,170, 81,236,229,230,244,244,232,225,105,128,248,
134,244,232,225,105,128, 14, 53,236,229,230,244,244,232,225,105,
128,248,133,244,232,225,105,128, 14, 52,239,244,232,225,105,128,
14, 66,117, 3,170,122,170,172,170,179,101, 3,170,130,170,154,
170,165,101, 2,170,136,170,147,236,229,230,244,244,232,225,105,
128,248,136,244,232,225,105,128, 14, 55,236,229,230,244,244,232,
225,105,128,248,135,244,232,225,105,128, 14, 54,244,232,225,105,
128, 14, 56,245,244,232,225,105,128, 14, 57,226,239,240,239,237,
239,230,111,128, 49, 25, 99, 5,170,210,170,231,170,240,171, 33,
171, 55,225,242,239,110,129, 1, 97,170,219,228,239,244,225,227,
227,229,238,116,128, 30,103,229,228,233,236,236, 97,128, 1, 95,
232,247, 97,131, 2, 89,170,252,171, 7,171, 26,227,249,242,233,
236,236,233, 99,128, 4,217,228,233,229,242,229,243,233,243,227,
249,242,233,236,236,233, 99,128, 4,219,232,239,239,107,128, 2,
90,233,242, 99, 2,171, 41,171, 46,236,101,128, 36,226,245,237,
230,236,229,120,128, 1, 93,239,237,237,225,225,227,227,229,238,
116,128, 2, 25,228,239,116, 2,171, 76,171, 85,225,227,227,229,
238,116,128, 30, 97,226,229,236,239,119,129, 30, 99,171, 95,228,
239,244,225,227,227,229,238,116,128, 30,105,101, 9,171,127,171,
143,171,178,171,243,172, 90,172,117,172,142,172,223,172,250,225,
231,245,236,236,226,229,236,239,247,227,237, 98,128, 3, 60, 99,
2,171,149,171,171,239,238,100,129, 32, 51,171,157,244,239,238,
229,227,232,233,238,229,243,101,128, 2,202,244,233,239,110,128,
0,167,229,110, 4,171,189,171,198,171,212,171,228,225,242,225,
226,233, 99,128, 6, 51,230,233,238,225,236,225,242,225,226,233,
99,128,254,178,233,238,233,244,233,225,236,225,242,225,226,233,
99,128,254,179,237,229,228,233,225,236,225,242,225,226,233, 99,
128,254,180,231,239,108,135, 5,182,172, 7,172, 21,172, 26,172,
35,172, 50,172, 66,172, 77, 49, 2,172, 13,172, 17, 51,128, 5,
182,102,128, 5,182,178, 99,128, 5,182,232,229,226,242,229,119,
128, 5,182,238,225,242,242,239,247,232,229,226,242,229,119,128,
5,182,241,245,225,242,244,229,242,232,229,226,242,229,119,128,
5,182,244,225,232,229,226,242,229,119,128, 5,146,247,233,228,
229,232,229,226,242,229,119,128, 5,182,104, 2,172, 96,172,107,
225,242,237,229,238,233,225,110,128, 5,125,233,242,225,231,225,
238, 97,128, 48, 91,235,225,244,225,235,225,238, 97,129, 48,187,
172,130,232,225,236,230,247,233,228,244,104,128,255,126,237,105,
2,172,149,172,192,227,239,236,239,110,131, 0, 59,172,163,172,
172,172,184,225,242,225,226,233, 99,128, 6, 27,237,239,238,239,
243,240,225,227,101,128,255, 27,243,237,225,236,108,128,254, 84,
246,239,233,227,229,228,237,225,242,235,235,225,238, 97,129, 48,
156,172,211,232,225,236,230,247,233,228,244,104,128,255,159,238,
116, 2,172,230,172,240,233,243,241,245,225,242,101,128, 51, 34,
239,243,241,245,225,242,101,128, 51, 35,246,229,110,142, 0, 55,
173, 28,173, 37,173, 47,173, 77,173, 84,173, 94,173,119,173,146,
173,180,173,192,173,203,173,236,173,244,173,255,225,242,225,226,
233, 99,128, 6,103,226,229,238,231,225,236,105,128, 9,237,227,
233,242,227,236,101,129, 36,102,173, 58,233,238,246,229,242,243,
229,243,225,238,243,243,229,242,233,102,128, 39,144,228,229,246,
97,128, 9,109,229,233,231,232,244,232,115,128, 33, 94,231,117,
2,173,101,173,110,234,225,242,225,244,105,128, 10,237,242,237,
245,235,232,105,128, 10,109,232, 97, 2,173,126,173,137,227,235,
225,242,225,226,233, 99,128, 6,103,238,231,250,232,239,117,128,
48, 39,105, 2,173,152,173,170,228,229,239,231,242,225,240,232,
233,227,240,225,242,229,110,128, 50, 38,238,230,229,242,233,239,
114,128, 32,135,237,239,238,239,243,240,225,227,101,128,255, 23,
239,236,228,243,244,249,236,101,128,247, 55,112, 2,173,209,173,
216,225,242,229,110,128, 36,122,229,114, 2,173,223,173,229,233,
239,100,128, 36,142,243,233,225,110,128, 6,247,242,239,237,225,
110,128, 33,118,243,245,240,229,242,233,239,114,128, 32,119,116,
2,174, 5,174, 43,229,229,110, 2,174, 13,174, 22,227,233,242,
227,236,101,128, 36,112,112, 2,174, 28,174, 35,225,242,229,110,
128, 36,132,229,242,233,239,100,128, 36,152,232,225,105,128, 14,
87,230,244,232,249,240,232,229,110,128, 0,173,104, 7,174, 76,
175, 50,175, 61,175, 75,176, 20,176, 33,176,197, 97, 6,174, 90,
174,101,174,111,174,122,175, 9,175, 34,225,242,237,229,238,233,
225,110,128, 5,119,226,229,238,231,225,236,105,128, 9,182,227,
249,242,233,236,236,233, 99,128, 4, 72,100, 2,174,128,174,224,
228, 97, 4,174,139,174,148,174,179,174,193,225,242,225,226,233,
99,128, 6, 81,228,225,237,237, 97, 2,174,158,174,167,225,242,
225,226,233, 99,128,252, 97,244,225,238,225,242,225,226,233, 99,
128,252, 94,230,225,244,232,225,225,242,225,226,233, 99,128,252,
96,235,225,243,242, 97, 2,174,203,174,212,225,242,225,226,233,
99,128,252, 98,244,225,238,225,242,225,226,233, 99,128,252, 95,
101,132, 37,146,174,236,174,243,174,251,175, 4,228,225,242,107,
128, 37,147,236,233,231,232,116,128, 37,145,237,229,228,233,245,
109,128, 37,146,246, 97,128, 9, 54,231,117, 2,175, 16,175, 25,
234,225,242,225,244,105,128, 10,182,242,237,245,235,232,105,128,
10, 54,236,243,232,229,236,229,244,232,229,226,242,229,119,128,
5,147,226,239,240,239,237,239,230,111,128, 49, 21,227,232,225,
227,249,242,233,236,236,233, 99,128, 4, 73,101, 4,175, 85,175,
150,175,160,175,177,229,110, 4,175, 96,175,105,175,119,175,135,
225,242,225,226,233, 99,128, 6, 52,230,233,238,225,236,225,242,
225,226,233, 99,128,254,182,233,238,233,244,233,225,236,225,242,
225,226,233, 99,128,254,183,237,229,228,233,225,236,225,242,225,
226,233, 99,128,254,184,233,227,239,240,244,233, 99,128, 3,227,
241,229,108,129, 32,170,175,168,232,229,226,242,229,119,128, 32,
170,246, 97,134, 5,176,175,194,175,209,175,223,175,232,175,247,
176, 7, 49, 2,175,200,175,205,177, 53,128, 5,176, 53,128, 5,
176, 50, 2,175,215,175,219, 50,128, 5,176,101,128, 5,176,232,
229,226,242,229,119,128, 5,176,238,225,242,242,239,247,232,229,
226,242,229,119,128, 5,176,241,245,225,242,244,229,242,232,229,
226,242,229,119,128, 5,176,247,233,228,229,232,229,226,242,229,
119,128, 5,176,232,225,227,249,242,233,236,236,233, 99,128, 4,
187,105, 2,176, 39,176, 50,237,225,227,239,240,244,233, 99,128,
3,237,110,131, 5,233,176, 60,176,143,176,152,100, 2,176, 66,
176,132,225,231,229,243,104,130,251, 73,176, 78,176, 87,232,229,
226,242,229,119,128,251, 73,115, 2,176, 93,176,113,232,233,238,
228,239,116,129,251, 44,176,104,232,229,226,242,229,119,128,251,
44,233,238,228,239,116,129,251, 45,176,123,232,229,226,242,229,
119,128,251, 45,239,244,232,229,226,242,229,119,128, 5,193,232,
229,226,242,229,119,128, 5,233,115, 2,176,158,176,178,232,233,
238,228,239,116,129,251, 42,176,169,232,229,226,242,229,119,128,
251, 42,233,238,228,239,116,129,251, 43,176,188,232,229,226,242,
229,119,128,251, 43,239,239,107,128, 2,130,105, 8,176,221,177,
9,177, 20,177, 45,177, 75,177, 83,177, 96,178, 11,231,237, 97,
131, 3,195,176,233,176,237,176,245, 49,128, 3,194,230,233,238,
225,108,128, 3,194,236,245,238,225,244,229,243,249,237,226,239,
236,231,242,229,229,107,128, 3,242,232,233,242,225,231,225,238,
97,128, 48, 87,235,225,244,225,235,225,238, 97,129, 48,183,177,
33,232,225,236,230,247,233,228,244,104,128,255,124,236,245,113,
2,177, 53,177, 62,232,229,226,242,229,119,128, 5,189,236,229,
230,244,232,229,226,242,229,119,128, 5,189,237,233,236,225,114,
128, 34, 60,238,228,239,244,232,229,226,242,229,119,128, 5,194,
239,115, 6,177,111,177,146,177,178,177,206,177,220,177,252, 97,
2,177,117,177,132,227,233,242,227,236,229,235,239,242,229,225,
110,128, 50,116,240,225,242,229,238,235,239,242,229,225,110,128,
50, 20,227,105, 2,177,153,177,165,229,245,227,235,239,242,229,
225,110,128, 49,126,242,227,236,229,235,239,242,229,225,110,128,
50,102,107, 2,177,184,177,198,233,249,229,239,235,235,239,242,
229,225,110,128, 49,122,239,242,229,225,110,128, 49, 69,238,233,
229,245,238,235,239,242,229,225,110,128, 49,123,112, 2,177,226,
177,239,225,242,229,238,235,239,242,229,225,110,128, 50, 6,233,
229,245,240,235,239,242,229,225,110,128, 49,125,244,233,235,229,
245,244,235,239,242,229,225,110,128, 49,124,120,141, 0, 54,178,
41,178, 50,178, 60,178, 90,178, 97,178,122,178,149,178,183,178,
195,178,206,178,239,178,247,179, 2,225,242,225,226,233, 99,128,
6,102,226,229,238,231,225,236,105,128, 9,236,227,233,242,227,
236,101,129, 36,101,178, 71,233,238,246,229,242,243,229,243,225,
238,243,243,229,242,233,102,128, 39,143,228,229,246, 97,128, 9,
108,231,117, 2,178,104,178,113,234,225,242,225,244,105,128, 10,
236,242,237,245,235,232,105,128, 10,108,232, 97, 2,178,129,178,
140,227,235,225,242,225,226,233, 99,128, 6,102,238,231,250,232,
239,117,128, 48, 38,105, 2,178,155,178,173,228,229,239,231,242,
225,240,232,233,227,240,225,242,229,110,128, 50, 37,238,230,229,
242,233,239,114,128, 32,134,237,239,238,239,243,240,225,227,101,
128,255, 22,239,236,228,243,244,249,236,101,128,247, 54,112, 2,
178,212,178,219,225,242,229,110,128, 36,121,229,114, 2,178,226,
178,232,233,239,100,128, 36,141,243,233,225,110,128, 6,246,242,
239,237,225,110,128, 33,117,243,245,240,229,242,233,239,114,128,
32,118,116, 2,179, 8,179, 79,229,229,110, 2,179, 16,179, 58,
99, 2,179, 22,179, 30,233,242,227,236,101,128, 36,111,245,242,
242,229,238,227,249,228,229,238,239,237,233,238,225,244,239,242,
226,229,238,231,225,236,105,128, 9,249,112, 2,179, 64,179, 71,
225,242,229,110,128, 36,131,229,242,233,239,100,128, 36,151,232,
225,105,128, 14, 86,108, 2,179, 91,179,111,225,243,104,129, 0,
47,179, 99,237,239,238,239,243,240,225,227,101,128,255, 15,239,
238,103,129, 1,127,179,119,228,239,244,225,227,227,229,238,116,
128, 30,155,109, 2,179,137,179,147,233,236,229,230,225,227,101,
128, 38, 58,239,238,239,243,240,225,227,101,128,255, 83,111, 6,
179,172,179,222,179,233,180, 2,180, 47,180, 58,102, 2,179,178,
179,192,240,225,243,245,241,232,229,226,242,229,119,128, 5,195,
116, 2,179,198,179,207,232,249,240,232,229,110,128, 0,173,243,
233,231,238,227,249,242,233,236,236,233, 99,128, 4, 76,232,233,
242,225,231,225,238, 97,128, 48, 93,235,225,244,225,235,225,238,
97,129, 48,189,179,246,232,225,236,230,247,233,228,244,104,128,
255,127,236,233,228,245,115, 2,180, 12,180, 29,236,239,238,231,
239,246,229,242,236,225,249,227,237, 98,128, 3, 56,243,232,239,
242,244,239,246,229,242,236,225,249,227,237, 98,128, 3, 55,242,
245,243,233,244,232,225,105,128, 14, 41,115, 3,180, 66,180, 76,
180, 84,225,236,225,244,232,225,105,128, 14, 40,239,244,232,225,
105,128, 14, 11,245,225,244,232,225,105,128, 14, 42,240, 97, 3,
180,102,180,122,180,154,227,101,129, 0, 32,180,109,232,225,227,
235,225,242,225,226,233, 99,128, 0, 32,228,101,129, 38, 96,180,
129,243,245,233,116, 2,180,138,180,146,226,236,225,227,107,128,
38, 96,247,232,233,244,101,128, 38,100,242,229,110,128, 36,174,
241,245,225,242,101, 11,180,188,180,199,180,213,180,238,180,255,
181, 25,181, 40,181, 73,181,100,181,156,181,171,226,229,236,239,
247,227,237, 98,128, 3, 59, 99, 2,180,205,180,209, 99,128, 51,
196,109,128, 51,157,228,233,225,231,239,238,225,236,227,242,239,
243,243,232,225,244,227,232,230,233,236,108,128, 37,169,232,239,
242,233,250,239,238,244,225,236,230,233,236,108,128, 37,164,107,
2,181, 5,181, 9,103,128, 51,143,109,129, 51,158,181, 15,227,
225,240,233,244,225,108,128, 51,206,108, 2,181, 31,181, 35,110,
128, 51,209,239,103,128, 51,210,109, 4,181, 50,181, 54,181, 59,
181, 63,103,128, 51,142,233,108,128, 51,213,109,128, 51,156,243,
241,245,225,242,229,100,128, 51,161,239,242,244,232,239,231,239,
238,225,236,227,242,239,243,243,232,225,244,227,232,230,233,236,
108,128, 37,166,245,240,240,229,114, 2,181,110,181,133,236,229,
230,244,244,239,236,239,247,229,242,242,233,231,232,244,230,233,
236,108,128, 37,167,242,233,231,232,244,244,239,236,239,247,229,
242,236,229,230,244,230,233,236,108,128, 37,168,246,229,242,244,
233,227,225,236,230,233,236,108,128, 37,165,247,232,233,244,229,
247,233,244,232,243,237,225,236,236,226,236,225,227,107,128, 37,
163,242,243,241,245,225,242,101,128, 51,219,115, 2,181,209,182,
123, 97, 4,181,219,181,229,181,236,181,247,226,229,238,231,225,
236,105,128, 9,183,228,229,246, 97,128, 9, 55,231,245,234,225,
242,225,244,105,128, 10,183,238,103, 8,182, 10,182, 24,182, 38,
182, 52,182, 67,182, 81,182, 95,182,108,227,233,229,245,227,235,
239,242,229,225,110,128, 49, 73,232,233,229,245,232,235,239,242,
229,225,110,128, 49,133,233,229,245,238,231,235,239,242,229,225,
110,128, 49,128,235,233,249,229,239,235,235,239,242,229,225,110,
128, 49, 50,238,233,229,245,238,235,239,242,229,225,110,128, 49,
101,240,233,229,245,240,235,239,242,229,225,110,128, 49, 67,243,
233,239,243,235,239,242,229,225,110,128, 49, 70,244,233,235,229,
245,244,235,239,242,229,225,110,128, 49, 56,245,240,229,242,233,
239,114,128,246,242,116, 2,182,139,182,162,229,242,236,233,238,
103,129, 0,163,182,150,237,239,238,239,243,240,225,227,101,128,
255,225,242,239,235,101, 2,182,171,182,188,236,239,238,231,239,
246,229,242,236,225,249,227,237, 98,128, 3, 54,243,232,239,242,
244,239,246,229,242,236,225,249,227,237, 98,128, 3, 53,117, 7,
182,222,182,254,183, 20,183, 31,183, 72,183, 82,183, 86,226,243,
229,116,130, 34,130,182,233,182,244,238,239,244,229,241,245,225,
108,128, 34,138,239,242,229,241,245,225,108,128, 34,134, 99, 2,
183, 4,183, 12,227,229,229,228,115,128, 34,123,232,244,232,225,
116,128, 34, 11,232,233,242,225,231,225,238, 97,128, 48, 89,107,
2,183, 37,183, 61,225,244,225,235,225,238, 97,129, 48,185,183,
49,232,225,236,230,247,233,228,244,104,128,255,125,245,238,225,
242,225,226,233, 99,128, 6, 82,237,237,225,244,233,239,110,128,
34, 17,110,128, 38, 60,240,229,242,243,229,116,130, 34,131,183,
99,183,110,238,239,244,229,241,245,225,108,128, 34,139,239,242,
229,241,245,225,108,128, 34,135,246,243,241,245,225,242,101,128,
51,220,249,239,245,247,225,229,242,225,243,241,245,225,242,101,
128, 51,124,116,144, 0,116,183,183,184,192,184,213,185,100,185,
140,187,188,191, 70,192,145,192,157,192,169,193,202,193,227,194,
57,194,237,195,165,195,255, 97, 10,183,205,183,215,183,236,183,
243,184, 12,184, 90,184,107,184,132,184,146,184,150,226,229,238,
231,225,236,105,128, 9,164,227,107, 2,183,222,183,229,228,239,
247,110,128, 34,164,236,229,230,116,128, 34,163,228,229,246, 97,
128, 9, 36,231,117, 2,183,250,184, 3,234,225,242,225,244,105,
128, 10,164,242,237,245,235,232,105,128, 10, 36,104, 4,184, 22,
184, 31,184, 45,184, 75,225,242,225,226,233, 99,128, 6, 55,230,
233,238,225,236,225,242,225,226,233, 99,128,254,194,105, 2,184,
51,184, 66,238,233,244,233,225,236,225,242,225,226,233, 99,128,
254,195,242,225,231,225,238, 97,128, 48, 95,237,229,228,233,225,
236,225,242,225,226,233, 99,128,254,196,233,243,249,239,245,229,
242,225,243,241,245,225,242,101,128, 51,125,235,225,244,225,235,
225,238, 97,129, 48,191,184,120,232,225,236,230,247,233,228,244,
104,128,255,128,244,247,229,229,236,225,242,225,226,233, 99,128,
6, 64,117,128, 3,196,118,130, 5,234,184,158,184,183,228,225,
231,229,115,129,251, 74,184,168,104,129,251, 74,184,174,232,229,
226,242,229,119,128,251, 74,232,229,226,242,229,119,128, 5,234,
98, 2,184,198,184,203,225,114,128, 1,103,239,240,239,237,239,
230,111,128, 49, 10, 99, 6,184,227,184,234,184,241,184,250,185,
60,185, 87,225,242,239,110,128, 1,101,227,245,242,108,128, 2,
168,229,228,233,236,236, 97,128, 1, 99,232,229,104, 4,185, 6,
185, 15,185, 29,185, 45,225,242,225,226,233, 99,128, 6,134,230,
233,238,225,236,225,242,225,226,233, 99,128,251,123,233,238,233,
244,233,225,236,225,242,225,226,233, 99,128,251,124,237,229,228,
233,225,236,225,242,225,226,233, 99,128,251,125,233,242, 99, 2,
185, 68,185, 73,236,101,128, 36,227,245,237,230,236,229,248,226,
229,236,239,119,128, 30,113,239,237,237,225,225,227,227,229,238,
116,128, 1, 99,100, 2,185,106,185,116,233,229,242,229,243,233,
115,128, 30,151,239,116, 2,185,123,185,132,225,227,227,229,238,
116,128, 30,107,226,229,236,239,119,128, 30,109,101, 9,185,160,
185,171,185,191,186,201,186,226,187, 34,187,101,187,106,187,158,
227,249,242,233,236,236,233, 99,128, 4, 66,228,229,243,227,229,
238,228,229,242,227,249,242,233,236,236,233, 99,128, 4,173,104,
7,185,207,185,216,185,230,186, 14,186, 44,186, 85,186,183,225,
242,225,226,233, 99,128, 6, 42,230,233,238,225,236,225,242,225,
226,233, 99,128,254,150,232,225,232,105, 2,185,239,185,254,238,
233,244,233,225,236,225,242,225,226,233, 99,128,252,162,243,239,
236,225,244,229,228,225,242,225,226,233, 99,128,252, 12,105, 2,
186, 20,186, 35,238,233,244,233,225,236,225,242,225,226,233, 99,
128,254,151,242,225,231,225,238, 97,128, 48,102,234,229,229,237,
105, 2,186, 54,186, 69,238,233,244,233,225,236,225,242,225,226,
233, 99,128,252,161,243,239,236,225,244,229,228,225,242,225,226,
233, 99,128,252, 11,109, 2,186, 91,186,125,225,242,226,245,244,
97, 2,186,102,186,111,225,242,225,226,233, 99,128, 6, 41,230,
233,238,225,236,225,242,225,226,233, 99,128,254,148,101, 2,186,
131,186,144,228,233,225,236,225,242,225,226,233, 99,128,254,152,
229,237,105, 2,186,152,186,167,238,233,244,233,225,236,225,242,
225,226,233, 99,128,252,164,243,239,236,225,244,229,228,225,242,
225,226,233, 99,128,252, 14,238,239,239,238,230,233,238,225,236,
225,242,225,226,233, 99,128,252,115,235,225,244,225,235,225,238,
97,129, 48,198,186,214,232,225,236,230,247,233,228,244,104,128,
255,131,108, 2,186,232,186,251,229,240,232,239,238,101,129, 33,
33,186,243,226,236,225,227,107,128, 38, 14,233,243,232, 97, 2,
187, 4,187, 19,231,229,228,239,236,225,232,229,226,242,229,119,
128, 5,160,241,229,244,225,238,225,232,229,226,242,229,119,128,
5,169,110, 4,187, 44,187, 53,187, 72,187, 93,227,233,242,227,
236,101,128, 36,105,233,228,229,239,231,242,225,240,232,233,227,
240,225,242,229,110,128, 50, 41,112, 2,187, 78,187, 85,225,242,
229,110,128, 36,125,229,242,233,239,100,128, 36,145,242,239,237,
225,110,128, 33,121,243,104,128, 2,167,116,131, 5,216,187,116,
187,136,187,145,228,225,231,229,243,104,129,251, 56,187,127,232,
229,226,242,229,119,128,251, 56,232,229,226,242,229,119,128, 5,
216,243,229,227,249,242,233,236,236,233, 99,128, 4,181,246,233,
114, 2,187,166,187,175,232,229,226,242,229,119,128, 5,155,236,
229,230,244,232,229,226,242,229,119,128, 5,155,104, 6,187,202,
188, 98,188,220,189, 96,190, 3,191, 60, 97, 5,187,214,187,224,
187,231,188, 0,188, 29,226,229,238,231,225,236,105,128, 9,165,
228,229,246, 97,128, 9, 37,231,117, 2,187,238,187,247,234,225,
242,225,244,105,128, 10,165,242,237,245,235,232,105,128, 10, 37,
108, 2,188, 6,188, 15,225,242,225,226,233, 99,128, 6, 48,230,
233,238,225,236,225,242,225,226,233, 99,128,254,172,238,244,232,
225,235,232,225,116, 3,188, 44,188, 75,188, 82,236,239,119, 2,
188, 52,188, 63,236,229,230,244,244,232,225,105,128,248,152,242,
233,231,232,244,244,232,225,105,128,248,151,244,232,225,105,128,
14, 76,245,240,240,229,242,236,229,230,244,244,232,225,105,128,
248,150,101, 3,188,106,188,170,188,193,104, 4,188,116,188,125,
188,139,188,155,225,242,225,226,233, 99,128, 6, 43,230,233,238,
225,236,225,242,225,226,233, 99,128,254,154,233,238,233,244,233,
225,236,225,242,225,226,233, 99,128,254,155,237,229,228,233,225,
236,225,242,225,226,233, 99,128,254,156,242,101, 2,188,177,188,
186,229,248,233,243,244,115,128, 34, 3,230,239,242,101,128, 34,
52,244, 97,130, 3,184,188,202,188,206, 49,128, 3,209,243,249,
237,226,239,236,231,242,229,229,107,128, 3,209,105, 2,188,226,
189, 56,229,245,244,104, 4,188,239,189, 18,189, 33,189, 42, 97,
2,188,245,189, 4,227,233,242,227,236,229,235,239,242,229,225,
110,128, 50,121,240,225,242,229,238,235,239,242,229,225,110,128,
50, 25,227,233,242,227,236,229,235,239,242,229,225,110,128, 50,
107,235,239,242,229,225,110,128, 49, 76,240,225,242,229,238,235,
239,242,229,225,110,128, 50, 11,242,244,229,229,110, 2,189, 66,
189, 75,227,233,242,227,236,101,128, 36,108,112, 2,189, 81,189,
88,225,242,229,110,128, 36,128,229,242,233,239,100,128, 36,148,
111, 6,189,110,189,127,189,132,189,146,189,151,189,204,238,225,
238,231,237,239,238,244,232,239,244,232,225,105,128, 14, 17,239,
107,128, 1,173,240,232,245,244,232,225,239,244,232,225,105,128,
14, 18,242,110,128, 0,254,244,104, 3,189,160,189,184,189,194,
97, 2,189,166,189,176,232,225,238,244,232,225,105,128, 14, 23,
238,244,232,225,105,128, 14, 16,239,238,231,244,232,225,105,128,
14, 24,245,238,231,244,232,225,105,128, 14, 22,245,243,225,238,
100, 2,189,214,189,225,227,249,242,233,236,236,233, 99,128, 4,
130,243,243,229,240,225,242,225,244,239,114, 2,189,240,189,249,
225,242,225,226,233, 99,128, 6,108,240,229,242,243,233,225,110,
128, 6,108,242,229,101,144, 0, 51,190, 41,190, 50,190, 60,190,
90,190, 97,190,107,190,132,190,159,190,193,190,205,190,224,190,
235,191, 12,191, 34,191, 42,191, 53,225,242,225,226,233, 99,128,
6, 99,226,229,238,231,225,236,105,128, 9,233,227,233,242,227,
236,101,129, 36, 98,190, 71,233,238,246,229,242,243,229,243,225,
238,243,243,229,242,233,102,128, 39,140,228,229,246, 97,128, 9,
105,229,233,231,232,244,232,115,128, 33, 92,231,117, 2,190,114,
190,123,234,225,242,225,244,105,128, 10,233,242,237,245,235,232,
105,128, 10,105,232, 97, 2,190,139,190,150,227,235,225,242,225,
226,233, 99,128, 6, 99,238,231,250,232,239,117,128, 48, 35,105,
2,190,165,190,183,228,229,239,231,242,225,240,232,233,227,240,
225,242,229,110,128, 50, 34,238,230,229,242,233,239,114,128, 32,
131,237,239,238,239,243,240,225,227,101,128,255, 19,238,245,237,
229,242,225,244,239,242,226,229,238,231,225,236,105,128, 9,246,
239,236,228,243,244,249,236,101,128,247, 51,112, 2,190,241,190,
248,225,242,229,110,128, 36,118,229,114, 2,190,255,191, 5,233,
239,100,128, 36,138,243,233,225,110,128, 6,243,241,245,225,242,
244,229,242,115,129, 0,190,191, 25,229,237,228,225,243,104,128,
246,222,242,239,237,225,110,128, 33,114,243,245,240,229,242,233,
239,114,128, 0,179,244,232,225,105,128, 14, 83,250,243,241,245,
225,242,101,128, 51,148,105, 7,191, 86,191, 97,191,212,192, 54,
192, 66,192,115,192,132,232,233,242,225,231,225,238, 97,128, 48,
97,107, 2,191,103,191,127,225,244,225,235,225,238, 97,129, 48,
193,191,115,232,225,236,230,247,233,228,244,104,128,255,129,229,
245,116, 4,191,139,191,174,191,189,191,198, 97, 2,191,145,191,
160,227,233,242,227,236,229,235,239,242,229,225,110,128, 50,112,
240,225,242,229,238,235,239,242,229,225,110,128, 50, 16,227,233,
242,227,236,229,235,239,242,229,225,110,128, 50, 98,235,239,242,
229,225,110,128, 49, 55,240,225,242,229,238,235,239,242,229,225,
110,128, 50, 2,236,228,101,133, 2,220,191,228,191,239,192, 0,
192, 12,192, 40,226,229,236,239,247,227,237, 98,128, 3, 48, 99,
2,191,245,191,250,237, 98,128, 3, 3,239,237, 98,128, 3, 3,
228,239,245,226,236,229,227,237, 98,128, 3, 96,111, 2,192, 18,
192, 28,240,229,242,225,244,239,114,128, 34, 60,246,229,242,236,
225,249,227,237, 98,128, 3, 52,246,229,242,244,233,227,225,236,
227,237, 98,128, 3, 62,237,229,243,227,233,242,227,236,101,128,
34,151,112, 2,192, 72,192,102,229,232, 97, 2,192, 80,192, 89,
232,229,226,242,229,119,128, 5,150,236,229,230,244,232,229,226,
242,229,119,128, 5,150,240,233,231,245,242,237,245,235,232,105,
128, 10,112,244,236,239,227,249,242,233,236,236,233,227,227,237,
98,128, 4,131,247,238,225,242,237,229,238,233,225,110,128, 5,
127,236,233,238,229,226,229,236,239,119,128, 30,111,237,239,238,
239,243,240,225,227,101,128,255, 84,111, 7,192,185,192,196,192,
207,192,232,193, 96,193,108,193,192,225,242,237,229,238,233,225,
110,128, 5,105,232,233,242,225,231,225,238, 97,128, 48,104,235,
225,244,225,235,225,238, 97,129, 48,200,192,220,232,225,236,230,
247,233,228,244,104,128,255,132,110, 3,192,240,193, 82,193, 87,
101, 4,192,250,193, 63,193, 70,193, 76,226,225,114, 4,193, 6,
193, 35,193, 45,193, 54,229,248,244,242, 97, 2,193, 16,193, 26,
232,233,231,232,237,239,100,128, 2,229,236,239,247,237,239,100,
128, 2,233,232,233,231,232,237,239,100,128, 2,230,236,239,247,
237,239,100,128, 2,232,237,233,228,237,239,100,128, 2,231,230,
233,246,101,128, 1,189,243,233,120,128, 1,133,244,247,111,128,
1,168,239,115,128, 3,132,243,241,245,225,242,101,128, 51, 39,
240,225,244,225,235,244,232,225,105,128, 14, 15,242,244,239,233,
243,229,243,232,229,236,236,226,242,225,227,235,229,116, 2,193,
131,193,161,236,229,230,116,130, 48, 20,193,142,193,150,243,237,
225,236,108,128,254, 93,246,229,242,244,233,227,225,108,128,254,
57,242,233,231,232,116,130, 48, 21,193,173,193,181,243,237,225,
236,108,128,254, 94,246,229,242,244,233,227,225,108,128,254, 58,
244,225,239,244,232,225,105,128, 14, 21,240, 97, 2,193,209,193,
221,236,225,244,225,236,232,239,239,107,128, 1,171,242,229,110,
128, 36,175,114, 3,193,235,194, 10,194, 25,225,228,229,237,225,
242,107,129, 33, 34,193,247,115, 2,193,253,194, 3,225,238,115,
128,248,234,229,242,233,102,128,246,219,229,244,242,239,230,236,
229,248,232,239,239,107,128, 2,136,233,225,103, 4,194, 37,194,
42,194, 47,194, 52,228,110,128, 37,188,236,102,128, 37,196,242,
116,128, 37,186,245,112,128, 37,178,115,132, 2,166,194, 69,194,
108,194,214,194,227,225,228,105,130, 5,230,194, 79,194, 99,228,
225,231,229,243,104,129,251, 70,194, 90,232,229,226,242,229,119,
128,251, 70,232,229,226,242,229,119,128, 5,230,101, 2,194,114,
194,125,227,249,242,233,236,236,233, 99,128, 4, 70,242,101,134,
5,181,194,142,194,156,194,161,194,170,194,185,194,201, 49, 2,
194,148,194,152, 50,128, 5,181,101,128, 5,181,178, 98,128, 5,
181,232,229,226,242,229,119,128, 5,181,238,225,242,242,239,247,
232,229,226,242,229,119,128, 5,181,241,245,225,242,244,229,242,
232,229,226,242,229,119,128, 5,181,247,233,228,229,232,229,226,
242,229,119,128, 5,181,232,229,227,249,242,233,236,236,233, 99,
128, 4, 91,245,240,229,242,233,239,114,128,246,243,116, 4,194,
247,195, 41,195,106,195,157, 97, 3,194,255,195, 9,195, 16,226,
229,238,231,225,236,105,128, 9,159,228,229,246, 97,128, 9, 31,
231,117, 2,195, 23,195, 32,234,225,242,225,244,105,128, 10,159,
242,237,245,235,232,105,128, 10, 31,229,104, 4,195, 52,195, 61,
195, 75,195, 91,225,242,225,226,233, 99,128, 6,121,230,233,238,
225,236,225,242,225,226,233, 99,128,251,103,233,238,233,244,233,
225,236,225,242,225,226,233, 99,128,251,104,237,229,228,233,225,
236,225,242,225,226,233, 99,128,251,105,232, 97, 3,195,115,195,
125,195,132,226,229,238,231,225,236,105,128, 9,160,228,229,246,
97,128, 9, 32,231,117, 2,195,139,195,148,234,225,242,225,244,
105,128, 10,160,242,237,245,235,232,105,128, 10, 32,245,242,238,
229,100,128, 2,135,117, 3,195,173,195,184,195,209,232,233,242,
225,231,225,238, 97,128, 48,100,235,225,244,225,235,225,238, 97,
129, 48,196,195,197,232,225,236,230,247,233,228,244,104,128,255,
130,243,237,225,236,108, 2,195,219,195,230,232,233,242,225,231,
225,238, 97,128, 48, 99,235,225,244,225,235,225,238, 97,129, 48,
195,195,243,232,225,236,230,247,233,228,244,104,128,255,111,119,
2,196, 5,196,110,101, 2,196, 11,196, 59,236,246,101, 3,196,
21,196, 30,196, 51,227,233,242,227,236,101,128, 36,107,112, 2,
196, 36,196, 43,225,242,229,110,128, 36,127,229,242,233,239,100,
128, 36,147,242,239,237,225,110,128, 33,123,238,244,121, 3,196,
69,196, 78,196, 89,227,233,242,227,236,101,128, 36,115,232,225,
238,231,250,232,239,117,128, 83, 68,112, 2,196, 95,196,102,225,
242,229,110,128, 36,135,229,242,233,239,100,128, 36,155,111,142,
0, 50,196,142,196,151,196,161,196,191,196,243,197, 12,197, 39,
197, 73,197, 85,197,104,197,115,197,148,197,156,197,180,225,242,
225,226,233, 99,128, 6, 98,226,229,238,231,225,236,105,128, 9,
232,227,233,242,227,236,101,129, 36, 97,196,172,233,238,246,229,
242,243,229,243,225,238,243,243,229,242,233,102,128, 39,139,100,
2,196,197,196,203,229,246, 97,128, 9,104,239,116, 2,196,210,
196,221,229,238,236,229,225,228,229,114,128, 32, 37,236,229,225,
228,229,114,129, 32, 37,196,232,246,229,242,244,233,227,225,108,
128,254, 48,231,117, 2,196,250,197, 3,234,225,242,225,244,105,
128, 10,232,242,237,245,235,232,105,128, 10,104,232, 97, 2,197,
19,197, 30,227,235,225,242,225,226,233, 99,128, 6, 98,238,231,
250,232,239,117,128, 48, 34,105, 2,197, 45,197, 63,228,229,239,
231,242,225,240,232,233,227,240,225,242,229,110,128, 50, 33,238,
230,229,242,233,239,114,128, 32,130,237,239,238,239,243,240,225,
227,101,128,255, 18,238,245,237,229,242,225,244,239,242,226,229,
238,231,225,236,105,128, 9,245,239,236,228,243,244,249,236,101,
128,247, 50,112, 2,197,121,197,128,225,242,229,110,128, 36,117,
229,114, 2,197,135,197,141,233,239,100,128, 36,137,243,233,225,
110,128, 6,242,242,239,237,225,110,128, 33,113,115, 2,197,162,
197,170,244,242,239,235,101,128, 1,187,245,240,229,242,233,239,
114,128, 0,178,244,104, 2,197,187,197,192,225,105,128, 14, 82,
233,242,228,115,128, 33, 84,117,145, 0,117,197,237,197,245,198,
30,198, 87,198,225,199, 6,199,129,199,145,199,196,200, 10,200,
91,200,100,200,219,200,243,201, 95,201,123,201,237,225,227,245,
244,101,128, 0,250, 98, 4,197,255,198, 4,198, 13,198, 23,225,
114,128, 2,137,229,238,231,225,236,105,128, 9,137,239,240,239,
237,239,230,111,128, 49, 40,242,229,246,101,128, 1,109, 99, 3,
198, 38,198, 45,198, 77,225,242,239,110,128, 1,212,233,242, 99,
2,198, 53,198, 58,236,101,128, 36,228,245,237,230,236,229,120,
129, 0,251,198, 69,226,229,236,239,119,128, 30,119,249,242,233,
236,236,233, 99,128, 4, 67,100, 5,198, 99,198,110,198,133,198,
139,198,215,225,244,244,225,228,229,246, 97,128, 9, 81,226,108,
2,198,117,198,125,225,227,245,244,101,128, 1,113,231,242,225,
246,101,128, 2, 21,229,246, 97,128, 9, 9,233,229,242,229,243,
233,115,133, 0,252,198,159,198,167,198,175,198,198,198,206,225,
227,245,244,101,128, 1,216,226,229,236,239,119,128, 30,115, 99,
2,198,181,198,188,225,242,239,110,128, 1,218,249,242,233,236,
236,233, 99,128, 4,241,231,242,225,246,101,128, 1,220,237,225,
227,242,239,110,128, 1,214,239,244,226,229,236,239,119,128, 30,
229,103, 2,198,231,198,238,242,225,246,101,128, 0,249,117, 2,
198,244,198,253,234,225,242,225,244,105,128, 10,137,242,237,245,
235,232,105,128, 10, 9,104, 3,199, 14,199, 24,199,102,233,242,
225,231,225,238, 97,128, 48, 70,111, 2,199, 30,199, 40,239,235,
225,226,239,246,101,128, 30,231,242,110,133, 1,176,199, 55,199,
63,199, 74,199, 82,199, 94,225,227,245,244,101,128, 30,233,228,
239,244,226,229,236,239,119,128, 30,241,231,242,225,246,101,128,
30,235,232,239,239,235,225,226,239,246,101,128, 30,237,244,233,
236,228,101,128, 30,239,245,238,231,225,242,245,237,236,225,245,
116,129, 1,113,199,118,227,249,242,233,236,236,233, 99,128, 4,
243,233,238,246,229,242,244,229,228,226,242,229,246,101,128, 2,
23,107, 3,199,153,199,177,199,188,225,244,225,235,225,238, 97,
129, 48,166,199,165,232,225,236,230,247,233,228,244,104,128,255,
115,227,249,242,233,236,236,233, 99,128, 4,121,239,242,229,225,
110,128, 49, 92,109, 2,199,202,199,255, 97, 2,199,208,199,241,
227,242,239,110,130, 1,107,199,219,199,230,227,249,242,233,236,
236,233, 99,128, 4,239,228,233,229,242,229,243,233,115,128, 30,
123,244,242,225,231,245,242,237,245,235,232,105,128, 10, 65,239,
238,239,243,240,225,227,101,128,255, 85,110, 2,200, 16,200, 71,
228,229,242,243,227,239,242,101,132, 0, 95,200, 35,200, 41,200,
53,200, 64,228,226,108,128, 32, 23,237,239,238,239,243,240,225,
227,101,128,255, 63,246,229,242,244,233,227,225,108,128,254, 51,
247,225,246,121,128,254, 79,105, 2,200, 77,200, 82,239,110,128,
34, 42,246,229,242,243,225,108,128, 34, 0,239,231,239,238,229,
107,128, 1,115,112, 5,200,112,200,119,200,127,200,142,200,193,
225,242,229,110,128, 36,176,226,236,239,227,107,128, 37,128,240,
229,242,228,239,244,232,229,226,242,229,119,128, 5,196,243,233,
236,239,110,131, 3,197,200,156,200,177,200,185,228,233,229,242,
229,243,233,115,129, 3,203,200,169,244,239,238,239,115,128, 3,
176,236,225,244,233,110,128, 2,138,244,239,238,239,115,128, 3,
205,244,225,227,107, 2,200,202,200,213,226,229,236,239,247,227,
237, 98,128, 3, 29,237,239,100,128, 2,212,114, 2,200,225,200,
237,225,231,245,242,237,245,235,232,105,128, 10,115,233,238,103,
128, 1,111,115, 3,200,251,201, 10,201, 55,232,239,242,244,227,
249,242,233,236,236,233, 99,128, 4, 94,237,225,236,108, 2,201,
19,201, 30,232,233,242,225,231,225,238, 97,128, 48, 69,235,225,
244,225,235,225,238, 97,129, 48,165,201, 43,232,225,236,230,247,
233,228,244,104,128,255,105,244,242,225,233,231,232,116, 2,201,
67,201, 78,227,249,242,233,236,236,233, 99,128, 4,175,243,244,
242,239,235,229,227,249,242,233,236,236,233, 99,128, 4,177,244,
233,236,228,101,130, 1,105,201,107,201,115,225,227,245,244,101,
128, 30,121,226,229,236,239,119,128, 30,117,117, 5,201,135,201,
145,201,152,201,177,201,193,226,229,238,231,225,236,105,128, 9,
138,228,229,246, 97,128, 9, 10,231,117, 2,201,159,201,168,234,
225,242,225,244,105,128, 10,138,242,237,245,235,232,105,128, 10,
10,237,225,244,242,225,231,245,242,237,245,235,232,105,128, 10,
66,246,239,247,229,236,243,233,231,110, 3,201,209,201,219,201,
226,226,229,238,231,225,236,105,128, 9,194,228,229,246, 97,128,
9, 66,231,245,234,225,242,225,244,105,128, 10,194,246,239,247,
229,236,243,233,231,110, 3,201,253,202, 7,202, 14,226,229,238,
231,225,236,105,128, 9,193,228,229,246, 97,128, 9, 65,231,245,
234,225,242,225,244,105,128, 10,193,118,139, 0,118,202, 51,202,
199,202,208,202,219,203,148,203,155,203,253,204, 9,204,109,204,
117,204,138, 97, 4,202, 61,202, 68,202, 93,202,104,228,229,246,
97,128, 9, 53,231,117, 2,202, 75,202, 84,234,225,242,225,244,
105,128, 10,181,242,237,245,235,232,105,128, 10, 53,235,225,244,
225,235,225,238, 97,128, 48,247,118,132, 5,213,202,116,202,143,
202,175,202,187,228,225,231,229,243,104,130,251, 53,202,129,202,
134,182, 53,128,251, 53,232,229,226,242,229,119,128,251, 53,104,
2,202,149,202,157,229,226,242,229,119,128, 5,213,239,236,225,
109,129,251, 75,202,166,232,229,226,242,229,119,128,251, 75,246,
225,246,232,229,226,242,229,119,128, 5,240,249,239,228,232,229,
226,242,229,119,128, 5,241,227,233,242,227,236,101,128, 36,229,
228,239,244,226,229,236,239,119,128, 30,127,101, 6,202,233,202,
244,203, 52,203, 63,203, 69,203,136,227,249,242,233,236,236,233,
99,128, 4, 50,104, 4,202,254,203, 7,203, 21,203, 37,225,242,
225,226,233, 99,128, 6,164,230,233,238,225,236,225,242,225,226,
233, 99,128,251,107,233,238,233,244,233,225,236,225,242,225,226,
233, 99,128,251,108,237,229,228,233,225,236,225,242,225,226,233,
99,128,251,109,235,225,244,225,235,225,238, 97,128, 48,249,238,
245,115,128, 38, 64,242,244,233,227,225,108, 2,203, 80,203, 86,
226,225,114,128, 0,124,236,233,238,101, 4,203, 99,203,110,203,
121,203,130,225,226,239,246,229,227,237, 98,128, 3, 13,226,229,
236,239,247,227,237, 98,128, 3, 41,236,239,247,237,239,100,128,
2,204,237,239,100,128, 2,200,247,225,242,237,229,238,233,225,
110,128, 5,126,232,239,239,107,128, 2,139,105, 3,203,163,203,
174,203,213,235,225,244,225,235,225,238, 97,128, 48,248,242,225,
237, 97, 3,203,185,203,195,203,202,226,229,238,231,225,236,105,
128, 9,205,228,229,246, 97,128, 9, 77,231,245,234,225,242,225,
244,105,128, 10,205,243,225,242,231, 97, 3,203,225,203,235,203,
242,226,229,238,231,225,236,105,128, 9,131,228,229,246, 97,128,
9, 3,231,245,234,225,242,225,244,105,128, 10,131,237,239,238,
239,243,240,225,227,101,128,255, 86,111, 3,204, 17,204, 28,204,
98,225,242,237,229,238,233,225,110,128, 5,120,233,227,229,100,
2,204, 37,204, 73,233,244,229,242,225,244,233,239,110, 2,204,
51,204, 62,232,233,242,225,231,225,238, 97,128, 48,158,235,225,
244,225,235,225,238, 97,128, 48,254,237,225,242,235,235,225,238,
97,129, 48,155,204, 86,232,225,236,230,247,233,228,244,104,128,
255,158,235,225,244,225,235,225,238, 97,128, 48,250,240,225,242,
229,110,128, 36,177,116, 2,204,123,204,130,233,236,228,101,128,
30,125,245,242,238,229,100,128, 2,140,117, 2,204,144,204,155,
232,233,242,225,231,225,238, 97,128, 48,148,235,225,244,225,235,
225,238, 97,128, 48,244,119,143, 0,119,204,200,205,177,205,187,
205,210,205,250,206, 61,206, 69,208, 40,208, 81,208, 93,208,168,
208,176,208,183,208,194,208,203, 97, 8,204,218,204,225,204,235,
204,246,205, 28,205, 60,205, 72,205,108,227,245,244,101,128, 30,
131,229,235,239,242,229,225,110,128, 49, 89,232,233,242,225,231,
225,238, 97,128, 48,143,107, 2,204,252,205, 20,225,244,225,235,
225,238, 97,129, 48,239,205, 8,232,225,236,230,247,233,228,244,
104,128,255,156,239,242,229,225,110,128, 49, 88,243,237,225,236,
108, 2,205, 38,205, 49,232,233,242,225,231,225,238, 97,128, 48,
142,235,225,244,225,235,225,238, 97,128, 48,238,244,244,239,243,
241,245,225,242,101,128, 51, 87,118, 2,205, 78,205, 86,229,228,
225,243,104,128, 48, 28,249,245,238,228,229,242,243,227,239,242,
229,246,229,242,244,233,227,225,108,128,254, 52,119, 3,205,116,
205,125,205,139,225,242,225,226,233, 99,128, 6, 72,230,233,238,
225,236,225,242,225,226,233, 99,128,254,238,232,225,237,250,225,
225,226,239,246,101, 2,205,154,205,163,225,242,225,226,233, 99,
128, 6, 36,230,233,238,225,236,225,242,225,226,233, 99,128,254,
134,226,243,241,245,225,242,101,128, 51,221,227,233,242, 99, 2,
205,196,205,201,236,101,128, 36,230,245,237,230,236,229,120,128,
1,117,100, 2,205,216,205,226,233,229,242,229,243,233,115,128,
30,133,239,116, 2,205,233,205,242,225,227,227,229,238,116,128,
30,135,226,229,236,239,119,128, 30,137,101, 4,206, 4,206, 15,
206, 27,206, 51,232,233,242,225,231,225,238, 97,128, 48,145,233,
229,242,243,244,242,225,243,115,128, 33, 24,107, 2,206, 33,206,
43,225,244,225,235,225,238, 97,128, 48,241,239,242,229,225,110,
128, 49, 94,239,235,239,242,229,225,110,128, 49, 93,231,242,225,
246,101,128, 30,129,232,233,244,101, 8,206, 90,206, 99,206,183,
207, 17,207,101,207,146,207,198,207,254,226,245,236,236,229,116,
128, 37,230, 99, 2,206,105,206,125,233,242,227,236,101,129, 37,
203,206,115,233,238,246,229,242,243,101,128, 37,217,239,242,238,
229,242,226,242,225,227,235,229,116, 2,206,142,206,162,236,229,
230,116,129, 48, 14,206,151,246,229,242,244,233,227,225,108,128,
254, 67,242,233,231,232,116,129, 48, 15,206,172,246,229,242,244,
233,227,225,108,128,254, 68,100, 2,206,189,206,230,233,225,237,
239,238,100,129, 37,199,206,200,227,239,238,244,225,233,238,233,
238,231,226,236,225,227,235,243,237,225,236,236,228,233,225,237,
239,238,100,128, 37,200,239,247,238,240,239,233,238,244,233,238,
103, 2,206,246,207, 6,243,237,225,236,236,244,242,233,225,238,
231,236,101,128, 37,191,244,242,233,225,238,231,236,101,128, 37,
189,236,101, 2,207, 24,207, 66,230,244,240,239,233,238,244,233,
238,103, 2,207, 39,207, 55,243,237,225,236,236,244,242,233,225,
238,231,236,101,128, 37,195,244,242,233,225,238,231,236,101,128,
37,193,238,244,233,227,245,236,225,242,226,242,225,227,235,229,
116, 2,207, 86,207, 93,236,229,230,116,128, 48, 22,242,233,231,
232,116,128, 48, 23,242,233,231,232,244,240,239,233,238,244,233,
238,103, 2,207,119,207,135,243,237,225,236,236,244,242,233,225,
238,231,236,101,128, 37,185,244,242,233,225,238,231,236,101,128,
37,183,115, 3,207,154,207,184,207,192,109, 2,207,160,207,172,
225,236,236,243,241,245,225,242,101,128, 37,171,233,236,233,238,
231,230,225,227,101,128, 38, 58,241,245,225,242,101,128, 37,161,
244,225,114,128, 38, 6,116, 2,207,204,207,215,229,236,229,240,
232,239,238,101,128, 38, 15,239,242,244,239,233,243,229,243,232,
229,236,236,226,242,225,227,235,229,116, 2,207,239,207,246,236,
229,230,116,128, 48, 24,242,233,231,232,116,128, 48, 25,245,240,
240,239,233,238,244,233,238,103, 2,208, 13,208, 29,243,237,225,
236,236,244,242,233,225,238,231,236,101,128, 37,181,244,242,233,
225,238,231,236,101,128, 37,179,105, 2,208, 46,208, 57,232,233,
242,225,231,225,238, 97,128, 48,144,107, 2,208, 63,208, 73,225,
244,225,235,225,238, 97,128, 48,240,239,242,229,225,110,128, 49,
95,237,239,238,239,243,240,225,227,101,128,255, 87,111, 4,208,
103,208,114,208,139,208,157,232,233,242,225,231,225,238, 97,128,
48,146,235,225,244,225,235,225,238, 97,129, 48,242,208,127,232,
225,236,230,247,233,228,244,104,128,255,102,110,129, 32,169,208,
145,237,239,238,239,243,240,225,227,101,128,255,230,247,225,229,
238,244,232,225,105,128, 14, 39,240,225,242,229,110,128, 36,178,
242,233,238,103,128, 30,152,243,245,240,229,242,233,239,114,128,
2,183,244,245,242,238,229,100,128, 2,141,249,238,110,128, 1,
191,120,137, 0,120,208,231,208,242,208,253,209, 6,209, 33,209,
46,209, 50,209, 62,209, 70,225,226,239,246,229,227,237, 98,128,
3, 61,226,239,240,239,237,239,230,111,128, 49, 18,227,233,242,
227,236,101,128, 36,231,100, 2,209, 12,209, 22,233,229,242,229,
243,233,115,128, 30,141,239,244,225,227,227,229,238,116,128, 30,
139,229,232,225,242,237,229,238,233,225,110,128, 5,109,105,128,
3,190,237,239,238,239,243,240,225,227,101,128,255, 88,240,225,
242,229,110,128, 36,179,243,245,240,229,242,233,239,114,128, 2,
227,121,143, 0,121,209,115,210, 74,210, 97,210,137,212,103,212,
111,212,128,212,192,212,204,213,201,213,241,213,253,214, 8,214,
29,215, 2, 97, 11,209,139,209,151,209,161,209,168,209,175,209,
185,209,210,209,221,210, 3,210, 16,210, 62,225,228,239,243,241,
245,225,242,101,128, 51, 78,226,229,238,231,225,236,105,128, 9,
175,227,245,244,101,128, 0,253,228,229,246, 97,128, 9, 47,229,
235,239,242,229,225,110,128, 49, 82,231,117, 2,209,192,209,201,
234,225,242,225,244,105,128, 10,175,242,237,245,235,232,105,128,
10, 47,232,233,242,225,231,225,238, 97,128, 48,132,107, 2,209,
227,209,251,225,244,225,235,225,238, 97,129, 48,228,209,239,232,
225,236,230,247,233,228,244,104,128,255,148,239,242,229,225,110,
128, 49, 81,237,225,235,235,225,238,244,232,225,105,128, 14, 78,
243,237,225,236,108, 2,210, 26,210, 37,232,233,242,225,231,225,
238, 97,128, 48,131,235,225,244,225,235,225,238, 97,129, 48,227,
210, 50,232,225,236,230,247,233,228,244,104,128,255,108,244,227,
249,242,233,236,236,233, 99,128, 4, 99,227,233,242, 99, 2,210,
83,210, 88,236,101,128, 36,232,245,237,230,236,229,120,128, 1,
119,100, 2,210,103,210,113,233,229,242,229,243,233,115,128, 0,
255,239,116, 2,210,120,210,129,225,227,227,229,238,116,128, 30,
143,226,229,236,239,119,128, 30,245,101, 7,210,153,211,161,211,
170,211,188,211,220,212, 40,212, 91,104, 8,210,171,210,180,210,
214,210,228,211, 45,211, 61,211,120,211,138,225,242,225,226,233,
99,128, 6, 74,226,225,242,242,229,101, 2,210,191,210,200,225,
242,225,226,233, 99,128, 6,210,230,233,238,225,236,225,242,225,
226,233, 99,128,251,175,230,233,238,225,236,225,242,225,226,233,
99,128,254,242,232,225,237,250,225,225,226,239,246,101, 4,210,
247,211, 0,211, 14,211, 30,225,242,225,226,233, 99,128, 6, 38,
230,233,238,225,236,225,242,225,226,233, 99,128,254,138,233,238,
233,244,233,225,236,225,242,225,226,233, 99,128,254,139,237,229,
228,233,225,236,225,242,225,226,233, 99,128,254,140,233,238,233,
244,233,225,236,225,242,225,226,233, 99,128,254,243,237,101, 2,
211, 68,211, 81,228,233,225,236,225,242,225,226,233, 99,128,254,
244,229,237,105, 2,211, 89,211,104,238,233,244,233,225,236,225,
242,225,226,233, 99,128,252,221,243,239,236,225,244,229,228,225,
242,225,226,233, 99,128,252, 88,238,239,239,238,230,233,238,225,
236,225,242,225,226,233, 99,128,252,148,244,232,242,229,229,228,
239,244,243,226,229,236,239,247,225,242,225,226,233, 99,128, 6,
209,235,239,242,229,225,110,128, 49, 86,110,129, 0,165,211,176,
237,239,238,239,243,240,225,227,101,128,255,229,111, 2,211,194,
211,203,235,239,242,229,225,110,128, 49, 85,242,233,238,232,233,
229,245,232,235,239,242,229,225,110,128, 49,134,114, 3,211,228,
212, 8,212, 20,225,232,226,229,238,249,239,237,111, 2,211,242,
211,251,232,229,226,242,229,119,128, 5,170,236,229,230,244,232,
229,226,242,229,119,128, 5,170,233,227,249,242,233,236,236,233,
99,128, 4, 75,245,228,233,229,242,229,243,233,243,227,249,242,
233,236,236,233, 99,128, 4,249,243,233,229,245,238,103, 3,212,
53,212, 62,212, 78,235,239,242,229,225,110,128, 49,129,240,225,
238,243,233,239,243,235,239,242,229,225,110,128, 49,131,243,233,
239,243,235,239,242,229,225,110,128, 49,130,244,233,246,232,229,
226,242,229,119,128, 5,154,231,242,225,246,101,128, 30,243,232,
239,239,107,129, 1,180,212,120,225,226,239,246,101,128, 30,247,
105, 5,212,140,212,151,212,162,212,171,212,179,225,242,237,229,
238,233,225,110,128, 5,117,227,249,242,233,236,236,233, 99,128,
4, 87,235,239,242,229,225,110,128, 49, 98,238,249,225,238,103,
128, 38, 47,247,238,225,242,237,229,238,233,225,110,128, 5,130,
237,239,238,239,243,240,225,227,101,128,255, 89,111, 7,212,220,
213, 34,213, 45,213, 55,213, 93,213,139,213,148,100,131, 5,217,
212,230,212,250,213, 3,228,225,231,229,243,104,129,251, 57,212,
241,232,229,226,242,229,119,128,251, 57,232,229,226,242,229,119,
128, 5,217,249,239,100, 2,213, 11,213, 20,232,229,226,242,229,
119,128, 5,242,240,225,244,225,232,232,229,226,242,229,119,128,
251, 31,232,233,242,225,231,225,238, 97,128, 48,136,233,235,239,
242,229,225,110,128, 49,137,107, 2,213, 61,213, 85,225,244,225,
235,225,238, 97,129, 48,232,213, 73,232,225,236,230,247,233,228,
244,104,128,255,150,239,242,229,225,110,128, 49, 91,243,237,225,
236,108, 2,213,103,213,114,232,233,242,225,231,225,238, 97,128,
48,135,235,225,244,225,235,225,238, 97,129, 48,231,213,127,232,
225,236,230,247,233,228,244,104,128,255,110,244,231,242,229,229,
107,128, 3,243,121, 2,213,154,213,191, 97, 2,213,160,213,170,
229,235,239,242,229,225,110,128, 49,136,107, 2,213,176,213,184,
239,242,229,225,110,128, 49,135,244,232,225,105,128, 14, 34,233,
238,231,244,232,225,105,128, 14, 13,112, 2,213,207,213,214,225,
242,229,110,128, 36,180,239,231,229,231,242,225,237,237,229,238,
105,129, 3,122,213,230,231,242,229,229,235,227,237, 98,128, 3,
69,114,129, 1,166,213,247,233,238,103,128, 30,153,243,245,240,
229,242,233,239,114,128, 2,184,116, 2,214, 14,214, 21,233,236,
228,101,128, 30,249,245,242,238,229,100,128, 2,142,117, 5,214,
41,214, 52,214, 62,214,100,214,232,232,233,242,225,231,225,238,
97,128, 48,134,233,235,239,242,229,225,110,128, 49,140,107, 2,
214, 68,214, 92,225,244,225,235,225,238, 97,129, 48,230,214, 80,
232,225,236,230,247,233,228,244,104,128,255,149,239,242,229,225,
110,128, 49, 96,115, 3,214,108,214,146,214,187,226,233,103, 2,
214,116,214,127,227,249,242,233,236,236,233, 99,128, 4,107,233,
239,244,233,230,233,229,228,227,249,242,233,236,236,233, 99,128,
4,109,236,233,244,244,236,101, 2,214,157,214,168,227,249,242,
233,236,236,233, 99,128, 4,103,233,239,244,233,230,233,229,228,
227,249,242,233,236,236,233, 99,128, 4,105,237,225,236,108, 2,
214,196,214,207,232,233,242,225,231,225,238, 97,128, 48,133,235,
225,244,225,235,225,238, 97,129, 48,229,214,220,232,225,236,230,
247,233,228,244,104,128,255,109,249,101, 2,214,239,214,248,235,
239,242,229,225,110,128, 49,139,239,235,239,242,229,225,110,128,
49,138,249, 97, 2,215, 9,215, 19,226,229,238,231,225,236,105,
128, 9,223,228,229,246, 97,128, 9, 95,122,142, 0,122,215, 58,
216, 66,216, 77,216,120,216,147,217,182,218, 34,218, 76,218, 88,
218,100,218,128,218,136,218,152,218,161, 97, 10,215, 80,215, 91,
215, 98,215,105,215,116,215,194,215,224,215,235,216, 15,216, 27,
225,242,237,229,238,233,225,110,128, 5,102,227,245,244,101,128,
1,122,228,229,246, 97,128, 9, 91,231,245,242,237,245,235,232,
105,128, 10, 91,104, 4,215,126,215,135,215,149,215,179,225,242,
225,226,233, 99,128, 6, 56,230,233,238,225,236,225,242,225,226,
233, 99,128,254,198,105, 2,215,155,215,170,238,233,244,233,225,
236,225,242,225,226,233, 99,128,254,199,242,225,231,225,238, 97,
128, 48, 86,237,229,228,233,225,236,225,242,225,226,233, 99,128,
254,200,233,110, 2,215,201,215,210,225,242,225,226,233, 99,128,
6, 50,230,233,238,225,236,225,242,225,226,233, 99,128,254,176,
235,225,244,225,235,225,238, 97,128, 48,182,241,229,102, 2,215,
243,216, 1,231,225,228,239,236,232,229,226,242,229,119,128, 5,
149,241,225,244,225,238,232,229,226,242,229,119,128, 5,148,242,
241,225,232,229,226,242,229,119,128, 5,152,249,233,110,130, 5,
214,216, 37,216, 57,228,225,231,229,243,104,129,251, 54,216, 48,
232,229,226,242,229,119,128,251, 54,232,229,226,242,229,119,128,
5,214,226,239,240,239,237,239,230,111,128, 49, 23, 99, 3,216,
85,216, 92,216,114,225,242,239,110,128, 1,126,233,242, 99, 2,
216,100,216,105,236,101,128, 36,233,245,237,230,236,229,120,128,
30,145,245,242,108,128, 2,145,228,239,116,130, 1,124,216,130,
216,139,225,227,227,229,238,116,128, 1,124,226,229,236,239,119,
128, 30,147,101, 6,216,161,216,172,216,215,216,226,216,237,217,
177,227,249,242,233,236,236,233, 99,128, 4, 55,100, 2,216,178,
216,197,229,243,227,229,238,228,229,242,227,249,242,233,236,236,
233, 99,128, 4,153,233,229,242,229,243,233,243,227,249,242,233,
236,236,233, 99,128, 4,223,232,233,242,225,231,225,238, 97,128,
48, 92,235,225,244,225,235,225,238, 97,128, 48,188,242,111,140,
0, 48,217, 10,217, 19,217, 29,217, 36,217, 61,217, 74,217, 85,
217, 97,217,108,217,118,217,129,217,136,225,242,225,226,233, 99,
128, 6, 96,226,229,238,231,225,236,105,128, 9,230,228,229,246,
97,128, 9,102,231,117, 2,217, 43,217, 52,234,225,242,225,244,
105,128, 10,230,242,237,245,235,232,105,128, 10,102,232,225,227,
235,225,242,225,226,233, 99,128, 6, 96,233,238,230,229,242,233,
239,114,128, 32,128,237,239,238,239,243,240,225,227,101,128,255,
16,239,236,228,243,244,249,236,101,128,247, 48,240,229,242,243,
233,225,110,128, 6,240,243,245,240,229,242,233,239,114,128, 32,
112,244,232,225,105,128, 14, 80,247,233,228,244,104, 3,217,148,
217,157,217,169,234,239,233,238,229,114,128,254,255,238,239,238,
234,239,233,238,229,114,128, 32, 12,243,240,225,227,101,128, 32,
11,244, 97,128, 3,182,104, 2,217,188,217,199,226,239,240,239,
237,239,230,111,128, 49, 19,101, 4,217,209,217,220,217,236,217,
247,225,242,237,229,238,233,225,110,128, 5,106,226,242,229,246,
229,227,249,242,233,236,236,233, 99,128, 4,194,227,249,242,233,
236,236,233, 99,128, 4, 54,100, 2,217,253,218, 16,229,243,227,
229,238,228,229,242,227,249,242,233,236,236,233, 99,128, 4,151,
233,229,242,229,243,233,243,227,249,242,233,236,236,233, 99,128,
4,221,105, 3,218, 42,218, 53,218, 64,232,233,242,225,231,225,
238, 97,128, 48, 88,235,225,244,225,235,225,238, 97,128, 48,184,
238,239,242,232,229,226,242,229,119,128, 5,174,236,233,238,229,
226,229,236,239,119,128, 30,149,237,239,238,239,243,240,225,227,
101,128,255, 90,111, 2,218,106,218,117,232,233,242,225,231,225,
238, 97,128, 48, 94,235,225,244,225,235,225,238, 97,128, 48,190,
240,225,242,229,110,128, 36,181,242,229,244,242,239,230,236,229,
248,232,239,239,107,128, 2,144,243,244,242,239,235,101,128, 1,
182,117, 2,218,167,218,178,232,233,242,225,231,225,238, 97,128,
48, 90,235,225,244,225,235,225,238, 97,128, 48,186
};
/*
* This function searches the compressed table efficiently.
*/
static unsigned long
ft_get_adobe_glyph_index( const char* name,
const char* limit )
{
int c = 0;
int count, min, max;
const unsigned char* p = ft_adobe_glyph_list;
if ( name == 0 || name >= limit )
goto NotFound;
c = *name++;
count = p[1];
p += 2;
min = 0;
max = count;
while ( min < max )
{
int mid = ( min + max ) >> 1;
const unsigned char* q = p + mid * 2;
int c2;
q = ft_adobe_glyph_list + ( ( (int)q[0] << 8 ) | q[1] );
c2 = q[0] & 127;
if ( c2 == c )
{
p = q;
goto Found;
}
if ( c2 < c )
min = mid + 1;
else
max = mid;
}
goto NotFound;
Found:
for (;;)
{
/* assert (*p & 127) == c */
if ( name >= limit )
{
if ( (p[0] & 128) == 0 &&
(p[1] & 128) != 0 )
return (unsigned long)( ( (int)p[2] << 8 ) | p[3] );
goto NotFound;
}
c = *name++;
if ( p[0] & 128 )
{
p++;
if ( c != (p[0] & 127) )
goto NotFound;
continue;
}
p++;
count = p[0] & 127;
if ( p[0] & 128 )
p += 2;
p++;
for ( ; count > 0; count--, p += 2 )
{
int offset = ( (int)p[0] << 8 ) | p[1];
const unsigned char* q = ft_adobe_glyph_list + offset;
if ( c == ( q[0] & 127 ) )
{
p = q;
goto NextIter;
}
}
goto NotFound;
NextIter:
;
}
NotFound:
return 0;
}
/* END */
#define VARIANT_BIT 0x80000000UL
#define BASE_GLYPH( code ) ( (FT_UInt32)( (code) & ~VARIANT_BIT ) )
/* Return the Unicode value corresponding to a given glyph. Note that */
/* we do deal with glyph variants by detecting a non-initial dot in */
/* the name, as in `A.swash' or `e.final'; in this case, the */
/* VARIANT_BIT is set in the return value. */
/* */
static FT_UInt32
ps_unicode_value( const char* glyph_name )
{
/* If the name begins with `uni', then the glyph name may be a */
/* hard-coded unicode character code. */
if ( glyph_name[0] == 'u' &&
glyph_name[1] == 'n' &&
glyph_name[2] == 'i' )
{
/* determine whether the next four characters following are */
/* hexadecimal. */
/* XXX: Add code to deal with ligatures, i.e. glyph names like */
/* `uniXXXXYYYYZZZZ'... */
FT_Int count;
FT_UInt32 value = 0;
const char* p = glyph_name + 3;
for ( count = 4; count > 0; count--, p++ )
{
char c = *p;
unsigned int d;
d = (unsigned char)c - '0';
if ( d >= 10 )
{
d = (unsigned char)c - 'A';
if ( d >= 6 )
d = 16;
else
d += 10;
}
/* Exit if a non-uppercase hexadecimal character was found */
/* -- this also catches character codes below `0' since such */
/* negative numbers cast to `unsigned int' are far too big. */
if ( d >= 16 )
break;
value = ( value << 4 ) + d;
}
/* there must be exactly four hex digits */
if ( count == 0 )
{
if ( *p == '\0' )
return value;
if ( *p == '.' )
return (FT_UInt32)( value | VARIANT_BIT );
}
}
/* If the name begins with `u', followed by four to six uppercase */
/* hexadecimal digits, it is a hard-coded unicode character code. */
if ( glyph_name[0] == 'u' )
{
FT_Int count;
FT_UInt32 value = 0;
const char* p = glyph_name + 1;
for ( count = 6; count > 0; count--, p++ )
{
char c = *p;
unsigned int d;
d = (unsigned char)c - '0';
if ( d >= 10 )
{
d = (unsigned char)c - 'A';
if ( d >= 6 )
d = 16;
else
d += 10;
}
if ( d >= 16 )
break;
value = ( value << 4 ) + d;
}
if ( count <= 2 )
{
if ( *p == '\0' )
return value;
if ( *p == '.' )
return (FT_UInt32)( value | VARIANT_BIT );
}
}
/* Look for a non-initial dot in the glyph name in order to */
/* find variants like `A.swash', `e.final', etc. */
{
const char* p = glyph_name;
const char* dot = NULL;
for ( ; *p; p++ )
{
if ( *p == '.' && p > glyph_name )
{
dot = p;
break;
}
}
/* now look up the glyph in the Adobe Glyph List */
if ( !dot )
return (FT_UInt32)ft_get_adobe_glyph_index( glyph_name, p );
else
return (FT_UInt32)( ft_get_adobe_glyph_index( glyph_name, dot ) |
VARIANT_BIT );
}
}
/* ft_qsort callback to sort the unicode map */
FT_CALLBACK_DEF( int )
compare_uni_maps( const void* a,
const void* b )
{
PS_UniMap* map1 = (PS_UniMap*)a;
PS_UniMap* map2 = (PS_UniMap*)b;
FT_UInt32 unicode1 = BASE_GLYPH( map1->unicode );
FT_UInt32 unicode2 = BASE_GLYPH( map2->unicode );
/* sort base glyphs before glyph variants */
if ( unicode1 == unicode2 )
{
if ( map1->unicode > map2->unicode )
return 1;
else if ( map1->unicode < map2->unicode )
return -1;
else
return 0;
}
else
{
if ( unicode1 > unicode2 )
return 1;
else if ( unicode1 < unicode2 )
return -1;
else
return 0;
}
}
/* support for extra glyphs not handled (well) in AGL; */
/* we add extra mappings for them if necessary */
#define EXTRA_GLYPH_LIST_SIZE 10
static const FT_UInt32 ft_extra_glyph_unicodes[EXTRA_GLYPH_LIST_SIZE] =
{
/* WGL 4 */
0x0394,
0x03A9,
0x2215,
0x00AD,
0x02C9,
0x03BC,
0x2219,
0x00A0,
/* Romanian */
0x021A,
0x021B
};
static const char ft_extra_glyph_names[] =
{
'D','e','l','t','a',0,
'O','m','e','g','a',0,
'f','r','a','c','t','i','o','n',0,
'h','y','p','h','e','n',0,
'm','a','c','r','o','n',0,
'm','u',0,
'p','e','r','i','o','d','c','e','n','t','e','r','e','d',0,
's','p','a','c','e',0,
'T','c','o','m','m','a','a','c','c','e','n','t',0,
't','c','o','m','m','a','a','c','c','e','n','t',0
};
static const FT_Int
ft_extra_glyph_name_offsets[EXTRA_GLYPH_LIST_SIZE] =
{
0,
6,
12,
21,
28,
35,
38,
53,
59,
72
};
static void
ps_check_extra_glyph_name( const char* gname,
FT_UInt glyph,
FT_UInt* extra_glyphs,
FT_UInt *states )
{
FT_UInt n;
for ( n = 0; n < EXTRA_GLYPH_LIST_SIZE; n++ )
{
if ( ft_strcmp( ft_extra_glyph_names +
ft_extra_glyph_name_offsets[n], gname ) == 0 )
{
if ( states[n] == 0 )
{
/* mark this extra glyph as a candidate for the cmap */
states[n] = 1;
extra_glyphs[n] = glyph;
}
return;
}
}
}
static void
ps_check_extra_glyph_unicode( FT_UInt32 uni_char,
FT_UInt *states )
{
FT_UInt n;
for ( n = 0; n < EXTRA_GLYPH_LIST_SIZE; n++ )
{
if ( uni_char == ft_extra_glyph_unicodes[n] )
{
/* disable this extra glyph from being added to the cmap */
states[n] = 2;
return;
}
}
}
/* Build a table that maps Unicode values to glyph indices. */
static FT_Error
ps_unicodes_init( FT_Memory memory,
PS_Unicodes table,
FT_UInt num_glyphs,
PS_GetGlyphNameFunc get_glyph_name,
PS_FreeGlyphNameFunc free_glyph_name,
FT_Pointer glyph_data )
{
FT_Error error;
FT_UInt extra_glyph_list_states[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
FT_UInt extra_glyphs[EXTRA_GLYPH_LIST_SIZE];
/* we first allocate the table */
table->num_maps = 0;
table->maps = 0;
if ( !FT_NEW_ARRAY( table->maps, num_glyphs + EXTRA_GLYPH_LIST_SIZE ) )
{
FT_UInt n;
FT_UInt count;
PS_UniMap* map;
FT_UInt32 uni_char;
map = table->maps;
for ( n = 0; n < num_glyphs; n++ )
{
const char* gname = get_glyph_name( glyph_data, n );
if ( gname )
{
ps_check_extra_glyph_name( gname, n,
extra_glyphs, extra_glyph_list_states );
uni_char = ps_unicode_value( gname );
if ( BASE_GLYPH( uni_char ) != 0 )
{
ps_check_extra_glyph_unicode( uni_char,
extra_glyph_list_states );
map->unicode = uni_char;
map->glyph_index = n;
map++;
}
if ( free_glyph_name )
free_glyph_name( glyph_data, gname );
}
}
for ( n = 0; n < EXTRA_GLYPH_LIST_SIZE; n++ )
{
if ( extra_glyph_list_states[n] == 1 )
{
/* This glyph name has an additional representation. */
/* Add it to the cmap. */
map->unicode = ft_extra_glyph_unicodes[n];
map->glyph_index = extra_glyphs[n];
map++;
}
}
/* now compress the table a bit */
count = (FT_UInt)( map - table->maps );
if ( count == 0 )
{
/* No unicode chars here! */
FT_FREE( table->maps );
if ( !error )
error = PSnames_Err_No_Unicode_Glyph_Name;
}
else
{
/* Reallocate if the number of used entries is much smaller. */
if ( count < num_glyphs / 2 )
{
(void)FT_RENEW_ARRAY( table->maps, num_glyphs, count );
error = PSnames_Err_Ok;
}
/* Sort the table in increasing order of unicode values, */
/* taking care of glyph variants. */
ft_qsort( table->maps, count, sizeof ( PS_UniMap ),
compare_uni_maps );
}
table->num_maps = count;
}
return error;
}
static FT_UInt
ps_unicodes_char_index( PS_Unicodes table,
FT_UInt32 unicode )
{
PS_UniMap *min, *max, *mid, *result = NULL;
/* Perform a binary search on the table. */
min = table->maps;
max = min + table->num_maps - 1;
while ( min <= max )
{
FT_UInt32 base_glyph;
mid = min + ( ( max - min ) >> 1 );
if ( mid->unicode == unicode )
{
result = mid;
break;
}
base_glyph = BASE_GLYPH( mid->unicode );
if ( base_glyph == unicode )
/* remember match but continue search for base glyph */
result = mid;
if ( min == max )
break;
if ( base_glyph < unicode )
min = mid + 1;
else
max = mid - 1;
}
if ( result )
return result->glyph_index;
else
return 0;
}
static FT_UInt32
ps_unicodes_char_next( PS_Unicodes table,
FT_UInt32 *unicode )
{
FT_UInt result = 0;
FT_UInt32 char_code = *unicode + 1;
{
FT_UInt min = 0;
FT_UInt max = table->num_maps;
FT_UInt mid;
PS_UniMap* map;
FT_UInt32 base_glyph;
while ( min < max )
{
mid = min + ( ( max - min ) >> 1 );
map = table->maps + mid;
if ( map->unicode == char_code )
{
result = map->glyph_index;
goto Exit;
}
base_glyph = BASE_GLYPH( map->unicode );
if ( base_glyph == char_code )
result = map->glyph_index;
if ( base_glyph < char_code )
min = mid + 1;
else
max = mid;
}
if ( result )
/* we have a variant glyph */
goto Exit;
/* we didn't find it; check whether we have a map just above it */
char_code = 0;
if ( min < table->num_maps )
{
map = table->maps + min;
result = map->glyph_index;
char_code = BASE_GLYPH( map->unicode );
}
}
Exit:
*unicode = char_code;
return result;
}
static const char*
ps_get_macintosh_name( FT_UInt name_index )
{
if ( name_index >= FT_NUM_MAC_NAMES )
name_index = 0;
return ft_standard_glyph_names + ft_mac_names[name_index];
}
static const char*
ps_get_standard_strings( FT_UInt sid )
{
if ( sid >= FT_NUM_SID_NAMES )
return 0;
return ft_standard_glyph_names + ft_sid_names[sid];
}
FT_DEFINE_SERVICE_PSCMAPSREC(
pscmaps_interface,
(PS_Unicode_ValueFunc) ps_unicode_value,
(PS_Unicodes_InitFunc) ps_unicodes_init,
(PS_Unicodes_CharIndexFunc)ps_unicodes_char_index,
(PS_Unicodes_CharNextFunc) ps_unicodes_char_next,
(PS_Macintosh_NameFunc) ps_get_macintosh_name,
(PS_Adobe_Std_StringsFunc) ps_get_standard_strings,
t1_standard_encoding,
t1_expert_encoding )
FT_DEFINE_SERVICEDESCREC1(
pscmaps_services,
FT_SERVICE_ID_POSTSCRIPT_CMAPS, &PSCMAPS_INTERFACE_GET )
static FT_Pointer
psnames_get_service( FT_Module module,
const char* service_id )
{
/* PSCMAPS_SERVICES_GET derefers `library' in PIC mode */
FT_UNUSED( module );
return ft_service_list_lookup( PSCMAPS_SERVICES_GET, service_id );
}
#define PUT_PS_NAMES_SERVICE( a ) a
FT_DEFINE_MODULE(
psnames_module_class,
/* this is not a font driver, nor a renderer */
0,
sizeof ( FT_ModuleRec ),
/* driver name */
"psnames",
/* driver version */
0x10000L,
/* driver requires FreeType 2 or above */
0x20000L,
PUT_PS_NAMES_SERVICE(
/* module specific interface */
(void*)&PSCMAPS_INTERFACE_GET ),
(FT_Module_Constructor)NULL,
(FT_Module_Destructor) NULL,
(FT_Module_Requester) PUT_PS_NAMES_SERVICE( psnames_get_service ) )
/* END */
/* END */
/***************************************************************************/
/* */
/* type1cid.c */
/* */
/* FreeType OpenType driver component (body only). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* cidparse.c */
/* */
/* CID-keyed Type1 parser (body). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* cidparse.h */
/* */
/* CID-keyed Type1 parser (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CIDPARSE_H__
/***************************************************************************/
/* */
/* psaux.h */
/* */
/* Auxiliary functions and data structures related to PostScript fonts */
/* (specification). */
/* */
/* Copyright 1996-2004, 2006, 2008, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSAUX_H__
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1_TABLE *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct PS_TableRec_* PS_Table;
typedef const struct PS_Table_FuncsRec_* PS_Table_Funcs;
/*************************************************************************/
/* */
/* <Struct> */
/* PS_Table_FuncsRec */
/* */
/* <Description> */
/* A set of function pointers to manage PS_Table objects. */
/* */
/* <Fields> */
/* table_init :: Used to initialize a table. */
/* */
/* table_done :: Finalizes resp. destroy a given table. */
/* */
/* table_add :: Adds a new object to a table. */
/* */
/* table_release :: Releases table data, then finalizes it. */
/* */
typedef struct PS_Table_FuncsRec_
{
FT_Error
(*init)( PS_Table table,
FT_Int count,
FT_Memory memory );
void
(*done)( PS_Table table );
FT_Error
(*add)( PS_Table table,
FT_Int idx,
void* object,
FT_PtrDist length );
void
(*release)( PS_Table table );
} PS_Table_FuncsRec;
/*************************************************************************/
/* */
/* <Struct> */
/* PS_TableRec */
/* */
/* <Description> */
/* A PS_Table is a simple object used to store an array of objects in */
/* a single memory block. */
/* */
/* <Fields> */
/* block :: The address in memory of the growheap's block. This */
/* can change between two object adds, due to */
/* reallocation. */
/* */
/* cursor :: The current top of the grow heap within its block. */
/* */
/* capacity :: The current size of the heap block. Increments by */
/* 1kByte chunks. */
/* */
/* max_elems :: The maximum number of elements in table. */
/* */
/* num_elems :: The current number of elements in table. */
/* */
/* elements :: A table of element addresses within the block. */
/* */
/* lengths :: A table of element sizes within the block. */
/* */
/* memory :: The object used for memory operations */
/* (alloc/realloc). */
/* */
/* funcs :: A table of method pointers for this object. */
/* */
typedef struct PS_TableRec_
{
/* current memory block */
FT_Byte* block;
/* current cursor in memory block */
FT_Offset cursor;
/* current size of memory block */
FT_Offset capacity;
FT_Long init;
FT_Int max_elems;
FT_Int num_elems;
/* addresses of table elements */
FT_Byte** elements;
/* lengths of table elements */
FT_PtrDist* lengths;
FT_Memory memory;
PS_Table_FuncsRec funcs;
} PS_TableRec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1 FIELDS & TOKENS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct PS_ParserRec_* PS_Parser;
typedef struct T1_TokenRec_* T1_Token;
typedef struct T1_FieldRec_* T1_Field;
/* simple enumeration type used to identify token types */
typedef enum T1_TokenType_
{
T1_TOKEN_TYPE_NONE = 0,
T1_TOKEN_TYPE_ANY,
T1_TOKEN_TYPE_STRING,
T1_TOKEN_TYPE_ARRAY,
/* aka `name' */
T1_TOKEN_TYPE_KEY,
/* do not remove */
T1_TOKEN_TYPE_MAX
} T1_TokenType;
/* a simple structure used to identify tokens */
typedef struct T1_TokenRec_
{
/* first character of token in input stream */
FT_Byte* start;
/* first character after the token */
FT_Byte* limit;
/* type of token */
T1_TokenType type;
} T1_TokenRec;
/* enumeration type used to identify object fields */
typedef enum T1_FieldType_
{
T1_FIELD_TYPE_NONE = 0,
T1_FIELD_TYPE_BOOL,
T1_FIELD_TYPE_INTEGER,
T1_FIELD_TYPE_FIXED,
T1_FIELD_TYPE_FIXED_1000,
T1_FIELD_TYPE_STRING,
T1_FIELD_TYPE_KEY,
T1_FIELD_TYPE_BBOX,
T1_FIELD_TYPE_INTEGER_ARRAY,
T1_FIELD_TYPE_FIXED_ARRAY,
T1_FIELD_TYPE_CALLBACK,
/* do not remove */
T1_FIELD_TYPE_MAX
} T1_FieldType;
typedef enum T1_FieldLocation_
{
T1_FIELD_LOCATION_CID_INFO,
T1_FIELD_LOCATION_FONT_DICT,
T1_FIELD_LOCATION_FONT_EXTRA,
T1_FIELD_LOCATION_FONT_INFO,
T1_FIELD_LOCATION_PRIVATE,
T1_FIELD_LOCATION_BBOX,
T1_FIELD_LOCATION_LOADER,
T1_FIELD_LOCATION_FACE,
T1_FIELD_LOCATION_BLEND,
/* do not remove */
T1_FIELD_LOCATION_MAX
} T1_FieldLocation;
typedef void
(*T1_Field_ParseFunc)( FT_Face face,
FT_Pointer parser );
/* structure type used to model object fields */
typedef struct T1_FieldRec_
{
/* field identifier */
const char* ident;
T1_FieldLocation location;
/* type of field */
T1_FieldType type;
T1_Field_ParseFunc reader;
/* offset of field in object */
FT_UInt offset;
/* size of field in bytes */
FT_Byte size;
/* maximum number of elements for */
FT_UInt array_max;
/* array */
/* offset of element count for */
FT_UInt count_offset;
/* arrays; must not be zero if in */
/* use -- in other words, a */
/* `num_FOO' element must not */
/* start the used structure if we */
/* parse a `FOO' array */
/* where we expect it */
FT_UInt dict;
} T1_FieldRec;
/* also FontInfo and FDArray */
#define T1_FIELD_DICT_FONTDICT ( 1 << 0 )
#define T1_FIELD_DICT_PRIVATE ( 1 << 1 )
#define T1_NEW_SIMPLE_FIELD( _ident, _type, _fname, _dict ) \
{ \
_ident, T1CODE, _type, \
0, \
FT_FIELD_OFFSET( _fname ), \
FT_FIELD_SIZE( _fname ), \
0, 0, \
_dict \
},
#define T1_NEW_CALLBACK_FIELD( _ident, _reader, _dict ) \
{ \
_ident, T1CODE, T1_FIELD_TYPE_CALLBACK, \
(T1_Field_ParseFunc)_reader, \
0, 0, \
0, 0, \
_dict \
},
#define T1_NEW_TABLE_FIELD( _ident, _type, _fname, _max, _dict ) \
{ \
_ident, T1CODE, _type, \
0, \
FT_FIELD_OFFSET( _fname ), \
FT_FIELD_SIZE_DELTA( _fname ), \
_max, \
FT_FIELD_OFFSET( num_ ## _fname ), \
_dict \
},
#define T1_NEW_TABLE_FIELD2( _ident, _type, _fname, _max, _dict ) \
{ \
_ident, T1CODE, _type, \
0, \
FT_FIELD_OFFSET( _fname ), \
FT_FIELD_SIZE_DELTA( _fname ), \
_max, 0, \
_dict \
},
#define T1_FIELD_BOOL( _ident, _fname, _dict ) \
T1_NEW_SIMPLE_FIELD( _ident, T1_FIELD_TYPE_BOOL, _fname, _dict )
#define T1_FIELD_NUM( _ident, _fname, _dict ) \
T1_NEW_SIMPLE_FIELD( _ident, T1_FIELD_TYPE_INTEGER, _fname, _dict )
#define T1_FIELD_FIXED( _ident, _fname, _dict ) \
T1_NEW_SIMPLE_FIELD( _ident, T1_FIELD_TYPE_FIXED, _fname, _dict )
#define T1_FIELD_FIXED_1000( _ident, _fname, _dict ) \
T1_NEW_SIMPLE_FIELD( _ident, T1_FIELD_TYPE_FIXED_1000, _fname, \
_dict )
#define T1_FIELD_STRING( _ident, _fname, _dict ) \
T1_NEW_SIMPLE_FIELD( _ident, T1_FIELD_TYPE_STRING, _fname, _dict )
#define T1_FIELD_KEY( _ident, _fname, _dict ) \
T1_NEW_SIMPLE_FIELD( _ident, T1_FIELD_TYPE_KEY, _fname, _dict )
#define T1_FIELD_BBOX( _ident, _fname, _dict ) \
T1_NEW_SIMPLE_FIELD( _ident, T1_FIELD_TYPE_BBOX, _fname, _dict )
#define T1_FIELD_NUM_TABLE( _ident, _fname, _fmax, _dict ) \
T1_NEW_TABLE_FIELD( _ident, T1_FIELD_TYPE_INTEGER_ARRAY, \
_fname, _fmax, _dict )
#define T1_FIELD_FIXED_TABLE( _ident, _fname, _fmax, _dict ) \
T1_NEW_TABLE_FIELD( _ident, T1_FIELD_TYPE_FIXED_ARRAY, \
_fname, _fmax, _dict )
#define T1_FIELD_NUM_TABLE2( _ident, _fname, _fmax, _dict ) \
T1_NEW_TABLE_FIELD2( _ident, T1_FIELD_TYPE_INTEGER_ARRAY, \
_fname, _fmax, _dict )
#define T1_FIELD_FIXED_TABLE2( _ident, _fname, _fmax, _dict ) \
T1_NEW_TABLE_FIELD2( _ident, T1_FIELD_TYPE_FIXED_ARRAY, \
_fname, _fmax, _dict )
#define T1_FIELD_CALLBACK( _ident, _name, _dict ) \
T1_NEW_CALLBACK_FIELD( _ident, _name, _dict )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1 PARSER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef const struct PS_Parser_FuncsRec_* PS_Parser_Funcs;
typedef struct PS_Parser_FuncsRec_
{
void
(*init)( PS_Parser parser,
FT_Byte* base,
FT_Byte* limit,
FT_Memory memory );
void
(*done)( PS_Parser parser );
void
(*skip_spaces)( PS_Parser parser );
void
(*skip_PS_token)( PS_Parser parser );
FT_Long
(*to_int)( PS_Parser parser );
FT_Fixed
(*to_fixed)( PS_Parser parser,
FT_Int power_ten );
FT_Error
(*to_bytes)( PS_Parser parser,
FT_Byte* bytes,
FT_Offset max_bytes,
FT_Long* pnum_bytes,
FT_Bool delimiters );
FT_Int
(*to_coord_array)( PS_Parser parser,
FT_Int max_coords,
FT_Short* coords );
FT_Int
(*to_fixed_array)( PS_Parser parser,
FT_Int max_values,
FT_Fixed* values,
FT_Int power_ten );
void
(*to_token)( PS_Parser parser,
T1_Token token );
void
(*to_token_array)( PS_Parser parser,
T1_Token tokens,
FT_UInt max_tokens,
FT_Int* pnum_tokens );
FT_Error
(*load_field)( PS_Parser parser,
const T1_Field field,
void** objects,
FT_UInt max_objects,
FT_ULong* pflags );
FT_Error
(*load_field_table)( PS_Parser parser,
const T1_Field field,
void** objects,
FT_UInt max_objects,
FT_ULong* pflags );
} PS_Parser_FuncsRec;
/*************************************************************************/
/* */
/* <Struct> */
/* PS_ParserRec */
/* */
/* <Description> */
/* A PS_Parser is an object used to parse a Type 1 font very quickly. */
/* */
/* <Fields> */
/* cursor :: The current position in the text. */
/* */
/* base :: Start of the processed text. */
/* */
/* limit :: End of the processed text. */
/* */
/* error :: The last error returned. */
/* */
/* memory :: The object used for memory operations (alloc/realloc). */
/* */
/* funcs :: A table of functions for the parser. */
/* */
typedef struct PS_ParserRec_
{
FT_Byte* cursor;
FT_Byte* base;
FT_Byte* limit;
FT_Error error;
FT_Memory memory;
PS_Parser_FuncsRec funcs;
} PS_ParserRec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1 BUILDER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct T1_BuilderRec_* T1_Builder;
typedef FT_Error
(*T1_Builder_Check_Points_Func)( T1_Builder builder,
FT_Int count );
typedef void
(*T1_Builder_Add_Point_Func)( T1_Builder builder,
FT_Pos x,
FT_Pos y,
FT_Byte flag );
typedef FT_Error
(*T1_Builder_Add_Point1_Func)( T1_Builder builder,
FT_Pos x,
FT_Pos y );
typedef FT_Error
(*T1_Builder_Add_Contour_Func)( T1_Builder builder );
typedef FT_Error
(*T1_Builder_Start_Point_Func)( T1_Builder builder,
FT_Pos x,
FT_Pos y );
typedef void
(*T1_Builder_Close_Contour_Func)( T1_Builder builder );
typedef const struct T1_Builder_FuncsRec_* T1_Builder_Funcs;
typedef struct T1_Builder_FuncsRec_
{
void
(*init)( T1_Builder builder,
FT_Face face,
FT_Size size,
FT_GlyphSlot slot,
FT_Bool hinting );
void
(*done)( T1_Builder builder );
T1_Builder_Check_Points_Func check_points;
T1_Builder_Add_Point_Func add_point;
T1_Builder_Add_Point1_Func add_point1;
T1_Builder_Add_Contour_Func add_contour;
T1_Builder_Start_Point_Func start_point;
T1_Builder_Close_Contour_Func close_contour;
} T1_Builder_FuncsRec;
/* an enumeration type to handle charstring parsing states */
typedef enum T1_ParseState_
{
T1_Parse_Start,
T1_Parse_Have_Width,
T1_Parse_Have_Moveto,
T1_Parse_Have_Path
} T1_ParseState;
/*************************************************************************/
/* */
/* <Structure> */
/* T1_BuilderRec */
/* */
/* <Description> */
/* A structure used during glyph loading to store its outline. */
/* */
/* <Fields> */
/* memory :: The current memory object. */
/* */
/* face :: The current face object. */
/* */
/* glyph :: The current glyph slot. */
/* */
/* loader :: XXX */
/* */
/* base :: The base glyph outline. */
/* */
/* current :: The current glyph outline. */
/* */
/* max_points :: maximum points in builder outline */
/* */
/* max_contours :: Maximum number of contours in builder outline. */
/* */
/* pos_x :: The horizontal translation (if composite glyph). */
/* */
/* pos_y :: The vertical translation (if composite glyph). */
/* */
/* left_bearing :: The left side bearing point. */
/* */
/* advance :: The horizontal advance vector. */
/* */
/* bbox :: Unused. */
/* */
/* parse_state :: An enumeration which controls the charstring */
/* parsing state. */
/* */
/* load_points :: If this flag is not set, no points are loaded. */
/* */
/* no_recurse :: Set but not used. */
/* */
/* metrics_only :: A boolean indicating that we only want to compute */
/* the metrics of a given glyph, not load all of its */
/* points. */
/* */
/* funcs :: An array of function pointers for the builder. */
/* */
typedef struct T1_BuilderRec_
{
FT_Memory memory;
FT_Face face;
FT_GlyphSlot glyph;
FT_GlyphLoader loader;
FT_Outline* base;
FT_Outline* current;
FT_Pos pos_x;
FT_Pos pos_y;
FT_Vector left_bearing;
FT_Vector advance;
/* bounding box */
FT_BBox bbox;
T1_ParseState parse_state;
FT_Bool load_points;
FT_Bool no_recurse;
FT_Bool metrics_only;
/* hinter-specific */
void* hints_funcs;
/* hinter-specific */
void* hints_globals;
T1_Builder_FuncsRec funcs;
} T1_BuilderRec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1 DECODER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
#if 0
/*************************************************************************/
/* */
/* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */
/* calls during glyph loading. */
/* */
#define T1_MAX_SUBRS_CALLS 8
/*************************************************************************/
/* */
/* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */
/* minimum of 16 is required. */
/* */
#define T1_MAX_CHARSTRINGS_OPERANDS 32
/* 0 */
#endif
typedef struct T1_Decoder_ZoneRec_
{
FT_Byte* cursor;
FT_Byte* base;
FT_Byte* limit;
} T1_Decoder_ZoneRec, *T1_Decoder_Zone;
typedef struct T1_DecoderRec_* T1_Decoder;
typedef const struct T1_Decoder_FuncsRec_* T1_Decoder_Funcs;
typedef FT_Error
(*T1_Decoder_Callback)( T1_Decoder decoder,
FT_UInt glyph_index );
typedef struct T1_Decoder_FuncsRec_
{
FT_Error
(*init)( T1_Decoder decoder,
FT_Face face,
FT_Size size,
FT_GlyphSlot slot,
FT_Byte** glyph_names,
PS_Blend blend,
FT_Bool hinting,
FT_Render_Mode hint_mode,
T1_Decoder_Callback callback );
void
(*done)( T1_Decoder decoder );
FT_Error
(*parse_charstrings)( T1_Decoder decoder,
FT_Byte* base,
FT_UInt len );
} T1_Decoder_FuncsRec;
typedef struct T1_DecoderRec_
{
T1_BuilderRec builder;
FT_Long stack[T1_MAX_CHARSTRINGS_OPERANDS];
FT_Long* top;
T1_Decoder_ZoneRec zones[T1_MAX_SUBRS_CALLS + 1];
T1_Decoder_Zone zone;
/* for seac */
FT_Service_PsCMaps psnames;
FT_UInt num_glyphs;
FT_Byte** glyph_names;
/* internal for sub routine calls */
FT_Int lenIV;
FT_UInt num_subrs;
FT_Byte** subrs;
/* array of subrs length (optional) */
FT_PtrDist* subrs_len;
FT_Matrix font_matrix;
FT_Vector font_offset;
FT_Int flex_state;
FT_Int num_flex_vectors;
FT_Vector flex_vectors[7];
/* for multiple master support */
PS_Blend blend;
FT_Render_Mode hint_mode;
T1_Decoder_Callback parse_callback;
T1_Decoder_FuncsRec funcs;
FT_Long* buildchar;
FT_UInt len_buildchar;
FT_Bool seac;
} T1_DecoderRec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** AFM PARSER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct AFM_ParserRec_* AFM_Parser;
typedef struct AFM_Parser_FuncsRec_
{
FT_Error
(*init)( AFM_Parser parser,
FT_Memory memory,
FT_Byte* base,
FT_Byte* limit );
void
(*done)( AFM_Parser parser );
FT_Error
(*parse)( AFM_Parser parser );
} AFM_Parser_FuncsRec;
typedef struct AFM_StreamRec_* AFM_Stream;
/*************************************************************************/
/* */
/* <Struct> */
/* AFM_ParserRec */
/* */
/* <Description> */
/* An AFM_Parser is a parser for the AFM files. */
/* */
/* <Fields> */
/* memory :: The object used for memory operations (alloc and */
/* realloc). */
/* */
/* stream :: This is an opaque object. */
/* */
/* FontInfo :: The result will be stored here. */
/* */
/* get_index :: A user provided function to get a glyph index by its */
/* name. */
/* */
typedef struct AFM_ParserRec_
{
FT_Memory memory;
AFM_Stream stream;
AFM_FontInfo FontInfo;
FT_Int
(*get_index)( const char* name,
FT_Offset len,
void* user_data );
void* user_data;
} AFM_ParserRec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE1 CHARMAPS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef const struct T1_CMap_ClassesRec_* T1_CMap_Classes;
typedef struct T1_CMap_ClassesRec_
{
FT_CMap_Class standard;
FT_CMap_Class expert;
FT_CMap_Class custom;
FT_CMap_Class unicode;
} T1_CMap_ClassesRec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PSAux Module Interface *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct PSAux_ServiceRec_
{
/* don't use `PS_Table_Funcs' and friends to avoid compiler warnings */
const PS_Table_FuncsRec* ps_table_funcs;
const PS_Parser_FuncsRec* ps_parser_funcs;
const T1_Builder_FuncsRec* t1_builder_funcs;
const T1_Decoder_FuncsRec* t1_decoder_funcs;
void
(*t1_decrypt)( FT_Byte* buffer,
FT_Offset length,
FT_UShort seed );
T1_CMap_Classes t1_cmap_classes;
/* fields after this comment line were added after version 2.1.10 */
const AFM_Parser_FuncsRec* afm_parser_funcs;
} PSAux_ServiceRec, *PSAux_Service;
/* backwards-compatible type definition */
typedef PSAux_ServiceRec PSAux_Interface;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** Some convenience functions *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
#define IS_PS_NEWLINE( ch ) \
( (ch) == '\r' || \
(ch) == '\n' )
#define IS_PS_SPACE( ch ) \
( (ch) == ' ' || \
IS_PS_NEWLINE( ch ) || \
(ch) == '\t' || \
(ch) == '\f' || \
(ch) == '\0' )
#define IS_PS_SPECIAL( ch ) \
( (ch) == '/' || \
(ch) == '(' || (ch) == ')' || \
(ch) == '<' || (ch) == '>' || \
(ch) == '[' || (ch) == ']' || \
(ch) == '{' || (ch) == '}' || \
(ch) == '%' )
#define IS_PS_DELIM( ch ) \
( IS_PS_SPACE( ch ) || \
IS_PS_SPECIAL( ch ) )
#define IS_PS_DIGIT( ch ) \
( (ch) >= '0' && (ch) <= '9' )
#define IS_PS_XDIGIT( ch ) \
( IS_PS_DIGIT( ch ) || \
( (ch) >= 'A' && (ch) <= 'F' ) || \
( (ch) >= 'a' && (ch) <= 'f' ) )
#define IS_PS_BASE85( ch ) \
( (ch) >= '!' && (ch) <= 'u' )
#define IS_PS_TOKEN( cur, limit, token ) \
( (char)(cur)[0] == (token)[0] && \
( (cur) + sizeof ( (token) ) == (limit) || \
( (cur) + sizeof( (token) ) < (limit) && \
IS_PS_DELIM( (cur)[sizeof ( (token) ) - 1] ) ) ) && \
ft_strncmp( (char*)(cur), (token), sizeof ( (token) ) - 1 ) == 0 )
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Struct> */
/* CID_Parser */
/* */
/* <Description> */
/* A CID_Parser is an object used to parse a Type 1 fonts very */
/* quickly. */
/* */
/* <Fields> */
/* root :: The root PS_ParserRec fields. */
/* */
/* stream :: The current input stream. */
/* */
/* postscript :: A pointer to the data to be parsed. */
/* */
/* postscript_len :: The length of the data to be parsed. */
/* */
/* data_offset :: The start position of the binary data (i.e., the */
/* end of the data to be parsed. */
/* */
/* binary_length :: The length of the data after the `StartData' */
/* command if the data format is hexadecimal. */
/* */
/* cid :: A structure which holds the information about */
/* the current font. */
/* */
/* num_dict :: The number of font dictionaries. */
/* */
typedef struct CID_Parser_
{
PS_ParserRec root;
FT_Stream stream;
FT_Byte* postscript;
FT_Long postscript_len;
FT_ULong data_offset;
FT_Long binary_length;
CID_FaceInfo cid;
FT_Int num_dict;
} CID_Parser;
FT_LOCAL( FT_Error )
cid_parser_new( CID_Parser* parser,
FT_Stream stream,
FT_Memory memory,
PSAux_Service psaux );
FT_LOCAL( void )
cid_parser_done( CID_Parser* parser );
/*************************************************************************/
/* */
/* PARSING ROUTINES */
/* */
/*************************************************************************/
#define cid_parser_skip_spaces( p ) \
(p)->root.funcs.skip_spaces( &(p)->root )
#define cid_parser_skip_PS_token( p ) \
(p)->root.funcs.skip_PS_token( &(p)->root )
#define cid_parser_to_int( p ) (p)->root.funcs.to_int( &(p)->root )
#define cid_parser_to_fixed( p, t ) (p)->root.funcs.to_fixed( &(p)->root, t )
#define cid_parser_to_coord_array( p, m, c ) \
(p)->root.funcs.to_coord_array( &(p)->root, m, c )
#define cid_parser_to_fixed_array( p, m, f, t ) \
(p)->root.funcs.to_fixed_array( &(p)->root, m, f, t )
#define cid_parser_to_token( p, t ) \
(p)->root.funcs.to_token( &(p)->root, t )
#define cid_parser_to_token_array( p, t, m, c ) \
(p)->root.funcs.to_token_array( &(p)->root, t, m, c )
#define cid_parser_load_field( p, f, o ) \
(p)->root.funcs.load_field( &(p)->root, f, o, 0, 0 )
#define cid_parser_load_field_table( p, f, o ) \
(p)->root.funcs.load_field_table( &(p)->root, f, o, 0, 0 )
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ciderrs.h */
/* */
/* CID error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the CID error enumeration constants. */
/* */
/*************************************************************************/
#define __CIDERRS_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX CID_Err_
#define FT_ERR_BASE FT_Mod_Err_CID
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cidparse
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** INPUT STREAM PARSER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( FT_Error )
cid_parser_new( CID_Parser* parser,
FT_Stream stream,
FT_Memory memory,
PSAux_Service psaux )
{
FT_Error error;
FT_ULong base_offset, offset, ps_len;
FT_Byte *cur, *limit;
FT_Byte *arg1, *arg2;
FT_MEM_ZERO( parser, sizeof ( *parser ) );
psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );
parser->stream = stream;
base_offset = FT_STREAM_POS();
/* first of all, check the font format in the header */
if ( FT_FRAME_ENTER( 31 ) )
goto Exit;
if ( ft_strncmp( (char *)stream->cursor,
"%!PS-Adobe-3.0 Resource-CIDFont", 31 ) )
{
FT_TRACE2(( " not a CID-keyed font\n" ));
error = CID_Err_Unknown_File_Format;
}
FT_FRAME_EXIT();
if ( error )
goto Exit;
Again:
/* now, read the rest of the file until we find */
/* `StartData' or `/sfnts' */
{
FT_Byte buffer[256 + 10];
/* same as signed FT_Stream->size */
FT_Long read_len = 256 + 10;
FT_Byte* p = buffer;
for ( offset = FT_STREAM_POS(); ; offset += 256 )
{
/* same as signed FT_Stream->size */
FT_Long stream_len;
stream_len = stream->size - FT_STREAM_POS();
if ( stream_len == 0 )
{
FT_TRACE2(( "cid_parser_new: no `StartData' keyword found\n" ));
error = CID_Err_Invalid_File_Format;
goto Exit;
}
read_len = FT_MIN( read_len, stream_len );
if ( FT_STREAM_READ( p, read_len ) )
goto Exit;
if ( read_len < 256 )
p[read_len] = '\0';
limit = p + read_len - 10;
for ( p = buffer; p < limit; p++ )
{
if ( p[0] == 'S' && ft_strncmp( (char*)p, "StartData", 9 ) == 0 )
{
/* save offset of binary data after `StartData' */
offset += p - buffer + 10;
goto Found;
}
else if ( p[1] == 's' && ft_strncmp( (char*)p, "/sfnts", 6 ) == 0 )
{
offset += p - buffer + 7;
goto Found;
}
}
FT_MEM_MOVE( buffer, p, 10 );
read_len = 256;
p = buffer + 10;
}
}
Found:
/* We have found the start of the binary data or the `/sfnts' token. */
/* Now rewind and extract the frame corresponding to this PostScript */
/* section. */
ps_len = offset - base_offset;
if ( FT_STREAM_SEEK( base_offset ) ||
FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
goto Exit;
parser->data_offset = offset;
parser->postscript_len = ps_len;
parser->root.base = parser->postscript;
parser->root.cursor = parser->postscript;
parser->root.limit = parser->root.cursor + ps_len;
parser->num_dict = -1;
/* Finally, we check whether `StartData' or `/sfnts' was real -- */
/* it could be in a comment or string. We also get the arguments */
/* of `StartData' to find out whether the data is represented in */
/* binary or hex format. */
arg1 = parser->root.cursor;
cid_parser_skip_PS_token( parser );
cid_parser_skip_spaces ( parser );
arg2 = parser->root.cursor;
cid_parser_skip_PS_token( parser );
cid_parser_skip_spaces ( parser );
limit = parser->root.limit;
cur = parser->root.cursor;
while ( cur < limit )
{
if ( parser->root.error )
{
error = parser->root.error;
goto Exit;
}
if ( cur[0] == 'S' && ft_strncmp( (char*)cur, "StartData", 9 ) == 0 )
{
if ( ft_strncmp( (char*)arg1, "(Hex)", 5 ) == 0 )
parser->binary_length = ft_atol( (const char *)arg2 );
limit = parser->root.limit;
cur = parser->root.cursor;
goto Exit;
}
else if ( cur[1] == 's' && ft_strncmp( (char*)cur, "/sfnts", 6 ) == 0 )
{
FT_TRACE2(( "cid_parser_new: cannot handle Type 11 fonts\n" ));
error = CID_Err_Unknown_File_Format;
goto Exit;
}
cid_parser_skip_PS_token( parser );
cid_parser_skip_spaces ( parser );
arg1 = arg2;
arg2 = cur;
cur = parser->root.cursor;
}
/* we haven't found the correct `StartData'; go back and continue */
/* searching */
FT_FRAME_RELEASE( parser->postscript );
if ( !FT_STREAM_SEEK( offset ) )
goto Again;
Exit:
return error;
}
FT_LOCAL_DEF( void )
cid_parser_done( CID_Parser* parser )
{
/* always free the private dictionary */
if ( parser->postscript )
{
FT_Stream stream = parser->stream;
FT_FRAME_RELEASE( parser->postscript );
}
parser->root.funcs.done( &parser->root );
}
/* END */
/***************************************************************************/
/* */
/* cidload.c */
/* */
/* CID-keyed Type1 font loader (body). */
/* */
/* Copyright 1996-2006, 2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* cidload.h */
/* */
/* CID-keyed Type1 font loader (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CIDLOAD_H__
FT_BEGIN_HEADER
typedef struct CID_Loader_
{
/* parser used to read the stream */
CID_Parser parser;
/* number of characters in encoding */
FT_Int num_chars;
} CID_Loader;
FT_LOCAL( FT_Long )
cid_get_offset( FT_Byte** start,
FT_Byte offsize );
FT_LOCAL( FT_Error )
cid_face_open( CID_Face face,
FT_Int face_index );
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cidload
/* read a single offset */
FT_LOCAL_DEF( FT_Long )
cid_get_offset( FT_Byte* *start,
FT_Byte offsize )
{
FT_Long result;
FT_Byte* p = *start;
for ( result = 0; offsize > 0; offsize-- )
{
result <<= 8;
result |= *p++;
}
*start = p;
return result;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE 1 SYMBOL PARSING *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static FT_Error
cid_load_keyword( CID_Face face,
CID_Loader* loader,
const T1_Field keyword )
{
FT_Error error;
CID_Parser* parser = &loader->parser;
FT_Byte* object;
void* dummy_object;
CID_FaceInfo cid = &face->cid;
/* if the keyword has a dedicated callback, call it */
if ( keyword->type == T1_FIELD_TYPE_CALLBACK )
{
keyword->reader( (FT_Face)face, parser );
error = parser->root.error;
goto Exit;
}
/* we must now compute the address of our target object */
switch ( keyword->location )
{
case T1_FIELD_LOCATION_CID_INFO:
object = (FT_Byte*)cid;
break;
case T1_FIELD_LOCATION_FONT_INFO:
object = (FT_Byte*)&cid->font_info;
break;
case T1_FIELD_LOCATION_FONT_EXTRA:
object = (FT_Byte*)&face->font_extra;
break;
case T1_FIELD_LOCATION_BBOX:
object = (FT_Byte*)&cid->font_bbox;
break;
default:
{
CID_FaceDict dict;
if ( parser->num_dict < 0 || parser->num_dict >= cid->num_dicts )
{
FT_ERROR(( "cid_load_keyword: invalid use of `%s'\n",
keyword->ident ));
error = CID_Err_Syntax_Error;
goto Exit;
}
dict = cid->font_dicts + parser->num_dict;
switch ( keyword->location )
{
case T1_FIELD_LOCATION_PRIVATE:
object = (FT_Byte*)&dict->private_dict;
break;
default:
object = (FT_Byte*)dict;
}
}
}
dummy_object = object;
/* now, load the keyword data in the object's field(s) */
if ( keyword->type == T1_FIELD_TYPE_INTEGER_ARRAY ||
keyword->type == T1_FIELD_TYPE_FIXED_ARRAY )
error = cid_parser_load_field_table( &loader->parser, keyword,
&dummy_object );
else
error = cid_parser_load_field( &loader->parser,
keyword, &dummy_object );
Exit:
return error;
}
FT_CALLBACK_DEF( FT_Error )
cid_parse_font_matrix( CID_Face face,
CID_Parser* parser )
{
FT_Matrix* matrix;
FT_Vector* offset;
CID_FaceDict dict;
FT_Face root = (FT_Face)&face->root;
FT_Fixed temp[6];
FT_Fixed temp_scale;
if ( parser->num_dict >= 0 && parser->num_dict < face->cid.num_dicts )
{
dict = face->cid.font_dicts + parser->num_dict;
matrix = &dict->font_matrix;
offset = &dict->font_offset;
(void)cid_parser_to_fixed_array( parser, 6, temp, 3 );
temp_scale = FT_ABS( temp[3] );
/* Set Units per EM based on FontMatrix values. We set the value to */
/* 1000 / temp_scale, because temp_scale was already multiplied by */
/* 1000 (in t1_tofixed, from psobjs.c). */
root->units_per_EM = (FT_UShort)FT_DivFix( 1000, temp_scale );
/* we need to scale the values by 1.0/temp[3] */
if ( temp_scale != 0x10000L )
{
temp[0] = FT_DivFix( temp[0], temp_scale );
temp[1] = FT_DivFix( temp[1], temp_scale );
temp[2] = FT_DivFix( temp[2], temp_scale );
temp[4] = FT_DivFix( temp[4], temp_scale );
temp[5] = FT_DivFix( temp[5], temp_scale );
temp[3] = 0x10000L;
}
matrix->xx = temp[0];
matrix->yx = temp[1];
matrix->xy = temp[2];
matrix->yy = temp[3];
/* note that the font offsets are expressed in integer font units */
offset->x = temp[4] >> 16;
offset->y = temp[5] >> 16;
}
/* this is a callback function; */
return CID_Err_Ok;
/* we must return an error code */
}
FT_CALLBACK_DEF( FT_Error )
parse_fd_array( CID_Face face,
CID_Parser* parser )
{
CID_FaceInfo cid = &face->cid;
FT_Memory memory = face->root.memory;
FT_Error error = CID_Err_Ok;
FT_Long num_dicts;
num_dicts = cid_parser_to_int( parser );
if ( !cid->font_dicts )
{
FT_Int n;
if ( FT_NEW_ARRAY( cid->font_dicts, num_dicts ) )
goto Exit;
cid->num_dicts = (FT_UInt)num_dicts;
/* don't forget to set a few defaults */
for ( n = 0; n < cid->num_dicts; n++ )
{
CID_FaceDict dict = cid->font_dicts + n;
/* default value for lenIV */
dict->private_dict.lenIV = 4;
}
}
Exit:
return error;
}
/* by mistake, `expansion_factor' appears both in PS_PrivateRec */
/* and CID_FaceDictRec (both are public header files and can't */
/* changed); we simply copy the value */
FT_CALLBACK_DEF( FT_Error )
parse_expansion_factor( CID_Face face,
CID_Parser* parser )
{
CID_FaceDict dict;
if ( parser->num_dict >= 0 && parser->num_dict < face->cid.num_dicts )
{
dict = face->cid.font_dicts + parser->num_dict;
dict->expansion_factor = cid_parser_to_fixed( parser, 0 );
dict->private_dict.expansion_factor = dict->expansion_factor;
}
return CID_Err_Ok;
}
static
const T1_FieldRec cid_field_records[] =
{
/***************************************************************************/
/* */
/* cidtoken.h */
/* */
/* CID token definitions (specification only). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2006, 2008, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#undef FT_STRUCTURE
#define FT_STRUCTURE CID_FaceInfoRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_CID_INFO
T1_FIELD_KEY ( "CIDFontName", cid_font_name, 0 )
T1_FIELD_FIXED ( "CIDFontVersion", cid_version, 0 )
T1_FIELD_NUM ( "CIDFontType", cid_font_type, 0 )
T1_FIELD_STRING( "Registry", registry, 0 )
T1_FIELD_STRING( "Ordering", ordering, 0 )
T1_FIELD_NUM ( "Supplement", supplement, 0 )
T1_FIELD_NUM ( "UIDBase", uid_base, 0 )
T1_FIELD_NUM ( "CIDMapOffset", cidmap_offset, 0 )
T1_FIELD_NUM ( "FDBytes", fd_bytes, 0 )
T1_FIELD_NUM ( "GDBytes", gd_bytes, 0 )
T1_FIELD_NUM ( "CIDCount", cid_count, 0 )
#undef FT_STRUCTURE
#define FT_STRUCTURE PS_FontInfoRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FONT_INFO
T1_FIELD_STRING( "version", version, 0 )
T1_FIELD_STRING( "Notice", notice, 0 )
T1_FIELD_STRING( "FullName", full_name, 0 )
T1_FIELD_STRING( "FamilyName", family_name, 0 )
T1_FIELD_STRING( "Weight", weight, 0 )
T1_FIELD_NUM ( "ItalicAngle", italic_angle, 0 )
T1_FIELD_BOOL ( "isFixedPitch", is_fixed_pitch, 0 )
T1_FIELD_NUM ( "UnderlinePosition", underline_position, 0 )
T1_FIELD_NUM ( "UnderlineThickness", underline_thickness, 0 )
#undef FT_STRUCTURE
#define FT_STRUCTURE PS_FontExtraRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FONT_EXTRA
T1_FIELD_NUM ( "FSType", fs_type, 0 )
#undef FT_STRUCTURE
#define FT_STRUCTURE CID_FaceDictRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FONT_DICT
T1_FIELD_NUM ( "PaintType", paint_type, 0 )
T1_FIELD_NUM ( "FontType", font_type, 0 )
T1_FIELD_NUM ( "SubrMapOffset", subrmap_offset, 0 )
T1_FIELD_NUM ( "SDBytes", sd_bytes, 0 )
T1_FIELD_NUM ( "SubrCount", num_subrs, 0 )
T1_FIELD_NUM ( "lenBuildCharArray", len_buildchar, 0 )
T1_FIELD_FIXED( "ForceBoldThreshold", forcebold_threshold, 0 )
T1_FIELD_FIXED( "StrokeWidth", stroke_width, 0 )
#undef FT_STRUCTURE
#define FT_STRUCTURE PS_PrivateRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_PRIVATE
T1_FIELD_NUM ( "UniqueID", unique_id, 0 )
T1_FIELD_NUM ( "lenIV", lenIV, 0 )
T1_FIELD_NUM ( "LanguageGroup", language_group, 0 )
T1_FIELD_NUM ( "password", password, 0 )
T1_FIELD_FIXED_1000( "BlueScale", blue_scale, 0 )
T1_FIELD_NUM ( "BlueShift", blue_shift, 0 )
T1_FIELD_NUM ( "BlueFuzz", blue_fuzz, 0 )
T1_FIELD_NUM_TABLE ( "BlueValues", blue_values, 14, 0 )
T1_FIELD_NUM_TABLE ( "OtherBlues", other_blues, 10, 0 )
T1_FIELD_NUM_TABLE ( "FamilyBlues", family_blues, 14, 0 )
T1_FIELD_NUM_TABLE ( "FamilyOtherBlues", family_other_blues, 10, 0 )
T1_FIELD_NUM_TABLE2( "StdHW", standard_width, 1, 0 )
T1_FIELD_NUM_TABLE2( "StdVW", standard_height, 1, 0 )
T1_FIELD_NUM_TABLE2( "MinFeature", min_feature, 2, 0 )
T1_FIELD_NUM_TABLE ( "StemSnapH", snap_widths, 12, 0 )
T1_FIELD_NUM_TABLE ( "StemSnapV", snap_heights, 12, 0 )
T1_FIELD_BOOL ( "ForceBold", force_bold, 0 )
#undef FT_STRUCTURE
#define FT_STRUCTURE FT_BBox
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_BBOX
T1_FIELD_BBOX( "FontBBox", xMin, 0 )
/* END */
T1_FIELD_CALLBACK( "FDArray", parse_fd_array, 0 )
T1_FIELD_CALLBACK( "FontMatrix", cid_parse_font_matrix, 0 )
T1_FIELD_CALLBACK( "ExpansionFactor", parse_expansion_factor, 0 )
{ 0, T1_FIELD_LOCATION_CID_INFO, T1_FIELD_TYPE_NONE, 0, 0, 0, 0, 0, 0 }
};
static FT_Error
cid_parse_dict( CID_Face face,
CID_Loader* loader,
FT_Byte* base,
FT_Long size )
{
CID_Parser* parser = &loader->parser;
parser->root.cursor = base;
parser->root.limit = base + size;
parser->root.error = CID_Err_Ok;
{
FT_Byte* cur = base;
FT_Byte* limit = cur + size;
for (;;)
{
FT_Byte* newlimit;
parser->root.cursor = cur;
cid_parser_skip_spaces( parser );
if ( parser->root.cursor >= limit )
newlimit = limit - 1 - 17;
else
newlimit = parser->root.cursor - 17;
/* look for `%ADOBeginFontDict' */
for ( ; cur < newlimit; cur++ )
{
if ( *cur == '%' &&
ft_strncmp( (char*)cur, "%ADOBeginFontDict", 17 ) == 0 )
{
/* if /FDArray was found, then cid->num_dicts is > 0, and */
/* we can start increasing parser->num_dict */
if ( face->cid.num_dicts > 0 )
parser->num_dict++;
}
}
cur = parser->root.cursor;
/* no error can occur in cid_parser_skip_spaces */
if ( cur >= limit )
break;
cid_parser_skip_PS_token( parser );
if ( parser->root.cursor >= limit || parser->root.error )
break;
/* look for immediates */
if ( *cur == '/' && cur + 2 < limit )
{
FT_PtrDist len;
cur++;
len = parser->root.cursor - cur;
if ( len > 0 && len < 22 )
{
/* now compare the immediate name to the keyword table */
T1_Field keyword = (T1_Field)cid_field_records;
for (;;)
{
FT_Byte* name;
name = (FT_Byte*)keyword->ident;
if ( !name )
break;
if ( cur[0] == name[0] &&
len == (FT_PtrDist)ft_strlen( (const char*)name ) )
{
FT_PtrDist n;
for ( n = 1; n < len; n++ )
if ( cur[n] != name[n] )
break;
if ( n >= len )
{
/* we found it - run the parsing callback */
parser->root.error = cid_load_keyword( face,
loader,
keyword );
if ( parser->root.error )
return parser->root.error;
break;
}
}
keyword++;
}
}
}
cur = parser->root.cursor;
}
}
return parser->root.error;
}
/* read the subrmap and the subrs of each font dict */
static FT_Error
cid_read_subrs( CID_Face face )
{
CID_FaceInfo cid = &face->cid;
FT_Memory memory = face->root.memory;
FT_Stream stream = face->cid_stream;
FT_Error error;
FT_Int n;
CID_Subrs subr;
FT_UInt max_offsets = 0;
FT_ULong* offsets = 0;
PSAux_Service psaux = (PSAux_Service)face->psaux;
if ( FT_NEW_ARRAY( face->subrs, cid->num_dicts ) )
goto Exit;
subr = face->subrs;
for ( n = 0; n < cid->num_dicts; n++, subr++ )
{
CID_FaceDict dict = cid->font_dicts + n;
FT_Int lenIV = dict->private_dict.lenIV;
FT_UInt count, num_subrs = dict->num_subrs;
FT_ULong data_len;
FT_Byte* p;
/* Check for possible overflow. */
if ( num_subrs == FT_UINT_MAX )
{
error = CID_Err_Syntax_Error;
goto Fail;
}
/* reallocate offsets array if needed */
if ( num_subrs + 1 > max_offsets )
{
FT_UInt new_max = FT_PAD_CEIL( num_subrs + 1, 4 );
if ( new_max <= max_offsets )
{
error = CID_Err_Syntax_Error;
goto Fail;
}
if ( FT_RENEW_ARRAY( offsets, max_offsets, new_max ) )
goto Fail;
max_offsets = new_max;
}
/* read the subrmap's offsets */
if ( FT_STREAM_SEEK( cid->data_offset + dict->subrmap_offset ) ||
FT_FRAME_ENTER( ( num_subrs + 1 ) * dict->sd_bytes ) )
goto Fail;
p = (FT_Byte*)stream->cursor;
for ( count = 0; count <= num_subrs; count++ )
offsets[count] = cid_get_offset( &p, (FT_Byte)dict->sd_bytes );
FT_FRAME_EXIT();
/* offsets must be ordered */
for ( count = 1; count <= num_subrs; count++ )
if ( offsets[count - 1] > offsets[count] )
goto Fail;
/* now, compute the size of subrs charstrings, */
/* allocate, and read them */
data_len = offsets[num_subrs] - offsets[0];
if ( FT_NEW_ARRAY( subr->code, num_subrs + 1 ) ||
FT_ALLOC( subr->code[0], data_len ) )
goto Fail;
if ( FT_STREAM_SEEK( cid->data_offset + offsets[0] ) ||
FT_STREAM_READ( subr->code[0], data_len ) )
goto Fail;
/* set up pointers */
for ( count = 1; count <= num_subrs; count++ )
{
FT_ULong len;
len = offsets[count] - offsets[count - 1];
subr->code[count] = subr->code[count - 1] + len;
}
/* decrypt subroutines, but only if lenIV >= 0 */
if ( lenIV >= 0 )
{
for ( count = 0; count < num_subrs; count++ )
{
FT_ULong len;
len = offsets[count + 1] - offsets[count];
psaux->t1_decrypt( subr->code[count], len, 4330 );
}
}
subr->num_subrs = num_subrs;
}
Exit:
FT_FREE( offsets );
return error;
Fail:
if ( face->subrs )
{
for ( n = 0; n < cid->num_dicts; n++ )
{
if ( face->subrs[n].code )
FT_FREE( face->subrs[n].code[0] );
FT_FREE( face->subrs[n].code );
}
FT_FREE( face->subrs );
}
goto Exit;
}
static void
cid_init_loader( CID_Loader* loader,
CID_Face face )
{
FT_UNUSED( face );
FT_MEM_ZERO( loader, sizeof ( *loader ) );
}
static void
cid_done_loader( CID_Loader* loader )
{
CID_Parser* parser = &loader->parser;
/* finalize parser */
cid_parser_done( parser );
}
static FT_Error
cid_hex_to_binary( FT_Byte* data,
FT_Long data_len,
FT_ULong offset,
CID_Face face )
{
FT_Stream stream = face->root.stream;
FT_Error error;
FT_Byte buffer[256];
FT_Byte *p, *plimit;
FT_Byte *d, *dlimit;
FT_Byte val;
FT_Bool upper_nibble, done;
if ( FT_STREAM_SEEK( offset ) )
goto Exit;
d = data;
dlimit = d + data_len;
p = buffer;
plimit = p;
upper_nibble = 1;
done = 0;
while ( d < dlimit )
{
if ( p >= plimit )
{
FT_ULong oldpos = FT_STREAM_POS();
FT_ULong size = stream->size - oldpos;
if ( size == 0 )
{
error = CID_Err_Syntax_Error;
goto Exit;
}
if ( FT_STREAM_READ( buffer, 256 > size ? size : 256 ) )
goto Exit;
p = buffer;
plimit = p + FT_STREAM_POS() - oldpos;
}
if ( ft_isdigit( *p ) )
val = (FT_Byte)( *p - '0' );
else if ( *p >= 'a' && *p <= 'f' )
val = (FT_Byte)( *p - 'a' );
else if ( *p >= 'A' && *p <= 'F' )
val = (FT_Byte)( *p - 'A' + 10 );
else if ( *p == ' ' ||
*p == '\t' ||
*p == '\r' ||
*p == '\n' ||
*p == '\f' ||
*p == '\0' )
{
p++;
continue;
}
else if ( *p == '>' )
{
val = 0;
done = 1;
}
else
{
error = CID_Err_Syntax_Error;
goto Exit;
}
if ( upper_nibble )
*d = (FT_Byte)( val << 4 );
else
{
*d = (FT_Byte)( *d + val );
d++;
}
upper_nibble = (FT_Byte)( 1 - upper_nibble );
if ( done )
break;
p++;
}
error = CID_Err_Ok;
Exit:
return error;
}
FT_LOCAL_DEF( FT_Error )
cid_face_open( CID_Face face,
FT_Int face_index )
{
CID_Loader loader;
CID_Parser* parser;
FT_Memory memory = face->root.memory;
FT_Error error;
cid_init_loader( &loader, face );
parser = &loader.parser;
error = cid_parser_new( parser, face->root.stream, face->root.memory,
(PSAux_Service)face->psaux );
if ( error )
goto Exit;
error = cid_parse_dict( face, &loader,
parser->postscript,
parser->postscript_len );
if ( error )
goto Exit;
if ( face_index < 0 )
goto Exit;
if ( FT_NEW( face->cid_stream ) )
goto Exit;
if ( parser->binary_length )
{
/* we must convert the data section from hexadecimal to binary */
if ( FT_ALLOC( face->binary_data, parser->binary_length ) ||
cid_hex_to_binary( face->binary_data, parser->binary_length,
parser->data_offset, face ) )
goto Exit;
FT_Stream_OpenMemory( face->cid_stream,
face->binary_data, parser->binary_length );
face->cid.data_offset = 0;
}
else
{
*face->cid_stream = *face->root.stream;
face->cid.data_offset = loader.parser.data_offset;
}
error = cid_read_subrs( face );
Exit:
cid_done_loader( &loader );
return error;
}
/* END */
/***************************************************************************/
/* */
/* cidobjs.c */
/* */
/* CID objects manager (body). */
/* */
/* Copyright 1996-2006, 2008, 2010-2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* cidgload.h */
/* */
/* OpenType Glyph Loader (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CIDGLOAD_H__
/***************************************************************************/
/* */
/* cidobjs.h */
/* */
/* CID objects manager (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CIDOBJS_H__
FT_BEGIN_HEADER
/* The following structures must be defined by the hinter */
typedef struct CID_Size_Hints_ CID_Size_Hints;
typedef struct CID_Glyph_Hints_ CID_Glyph_Hints;
/*************************************************************************/
/* */
/* <Type> */
/* CID_Driver */
/* */
/* <Description> */
/* A handle to a Type 1 driver object. */
/* */
typedef struct CID_DriverRec_* CID_Driver;
/*************************************************************************/
/* */
/* <Type> */
/* CID_Size */
/* */
/* <Description> */
/* A handle to a Type 1 size object. */
/* */
typedef struct CID_SizeRec_* CID_Size;
/*************************************************************************/
/* */
/* <Type> */
/* CID_GlyphSlot */
/* */
/* <Description> */
/* A handle to a Type 1 glyph slot object. */
/* */
typedef struct CID_GlyphSlotRec_* CID_GlyphSlot;
/*************************************************************************/
/* */
/* <Type> */
/* CID_CharMap */
/* */
/* <Description> */
/* A handle to a Type 1 character mapping object. */
/* */
/* <Note> */
/* The Type 1 format doesn't use a charmap but an encoding table. */
/* The driver is responsible for making up charmap objects */
/* corresponding to these tables. */
/* */
typedef struct CID_CharMapRec_* CID_CharMap;
/*************************************************************************/
/* */
/* HERE BEGINS THE TYPE 1 SPECIFIC STUFF */
/* */
/*************************************************************************/
typedef struct CID_SizeRec_
{
FT_SizeRec root;
FT_Bool valid;
} CID_SizeRec;
typedef struct CID_GlyphSlotRec_
{
FT_GlyphSlotRec root;
FT_Bool hint;
FT_Bool scaled;
FT_Fixed x_scale;
FT_Fixed y_scale;
} CID_GlyphSlotRec;
FT_LOCAL( void )
cid_slot_done( FT_GlyphSlot slot );
FT_LOCAL( FT_Error )
cid_slot_init( FT_GlyphSlot slot );
FT_LOCAL( void )
/* CID_Size */
cid_size_done( FT_Size size );
FT_LOCAL( FT_Error )
/* CID_Size */
cid_size_init( FT_Size size );
FT_LOCAL( FT_Error )
/* CID_Size */
cid_size_request( FT_Size size,
FT_Size_Request req );
FT_LOCAL( FT_Error )
cid_face_init( FT_Stream stream,
/* CID_Face */
FT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
FT_LOCAL( void )
/* CID_Face */
cid_face_done( FT_Face face );
FT_LOCAL( FT_Error )
cid_driver_init( FT_Module driver );
FT_LOCAL( void )
cid_driver_done( FT_Module driver );
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
#if 0
/* Compute the maximum advance width of a font through quick parsing */
FT_LOCAL( FT_Error )
cid_face_compute_max_advance( CID_Face face,
FT_Int* max_advance );
/* 0 */
#endif
FT_LOCAL( FT_Error )
/* CID_Glyph_Slot */
cid_slot_load_glyph( FT_GlyphSlot glyph,
/* CID_Size */
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags );
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cidobjs
/*************************************************************************/
/* */
/* SLOT FUNCTIONS */
/* */
/*************************************************************************/
FT_LOCAL_DEF( void )
cid_slot_done( FT_GlyphSlot slot )
{
slot->internal->glyph_hints = 0;
}
FT_LOCAL_DEF( FT_Error )
cid_slot_init( FT_GlyphSlot slot )
{
CID_Face face;
PSHinter_Service pshinter;
face = (CID_Face)slot->face;
pshinter = (PSHinter_Service)face->pshinter;
if ( pshinter )
{
FT_Module module;
module = FT_Get_Module( slot->face->driver->root.library,
"pshinter" );
if ( module )
{
T1_Hints_Funcs funcs;
funcs = pshinter->get_t1_funcs( module );
slot->internal->glyph_hints = (void*)funcs;
}
}
return 0;
}
/*************************************************************************/
/* */
/* SIZE FUNCTIONS */
/* */
/*************************************************************************/
static PSH_Globals_Funcs
cid_size_get_globals_funcs( CID_Size size )
{
CID_Face face = (CID_Face)size->root.face;
PSHinter_Service pshinter = (PSHinter_Service)face->pshinter;
FT_Module module;
module = FT_Get_Module( size->root.face->driver->root.library,
"pshinter" );
return ( module && pshinter && pshinter->get_globals_funcs )
? pshinter->get_globals_funcs( module )
: 0;
}
FT_LOCAL_DEF( void )
/* CID_Size */
cid_size_done( FT_Size cidsize )
{
CID_Size size = (CID_Size)cidsize;
if ( cidsize->internal )
{
PSH_Globals_Funcs funcs;
funcs = cid_size_get_globals_funcs( size );
if ( funcs )
funcs->destroy( (PSH_Globals)cidsize->internal );
cidsize->internal = 0;
}
}
FT_LOCAL_DEF( FT_Error )
/* CID_Size */
cid_size_init( FT_Size cidsize )
{
CID_Size size = (CID_Size)cidsize;
FT_Error error = CID_Err_Ok;
PSH_Globals_Funcs funcs = cid_size_get_globals_funcs( size );
if ( funcs )
{
PSH_Globals globals;
CID_Face face = (CID_Face)cidsize->face;
CID_FaceDict dict = face->cid.font_dicts + face->root.face_index;
PS_Private priv = &dict->private_dict;
error = funcs->create( cidsize->face->memory, priv, &globals );
if ( !error )
cidsize->internal = (FT_Size_Internal)(void*)globals;
}
return error;
}
FT_LOCAL( FT_Error )
cid_size_request( FT_Size size,
FT_Size_Request req )
{
PSH_Globals_Funcs funcs;
FT_Request_Metrics( size->face, req );
funcs = cid_size_get_globals_funcs( (CID_Size)size );
if ( funcs )
funcs->set_scale( (PSH_Globals)size->internal,
size->metrics.x_scale,
size->metrics.y_scale,
0, 0 );
return CID_Err_Ok;
}
/*************************************************************************/
/* */
/* FACE FUNCTIONS */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* cid_face_done */
/* */
/* <Description> */
/* Finalizes a given face object. */
/* */
/* <Input> */
/* face :: A pointer to the face object to destroy. */
/* */
FT_LOCAL_DEF( void )
/* CID_Face */
cid_face_done( FT_Face cidface )
{
CID_Face face = (CID_Face)cidface;
FT_Memory memory;
CID_FaceInfo cid;
PS_FontInfo info;
if ( !face )
return;
cid = &face->cid;
info = &cid->font_info;
memory = cidface->memory;
/* release subrs */
if ( face->subrs )
{
FT_Int n;
for ( n = 0; n < cid->num_dicts; n++ )
{
CID_Subrs subr = face->subrs + n;
if ( subr->code )
{
FT_FREE( subr->code[0] );
FT_FREE( subr->code );
}
}
FT_FREE( face->subrs );
}
/* release FontInfo strings */
FT_FREE( info->version );
FT_FREE( info->notice );
FT_FREE( info->full_name );
FT_FREE( info->family_name );
FT_FREE( info->weight );
/* release font dictionaries */
FT_FREE( cid->font_dicts );
cid->num_dicts = 0;
/* release other strings */
FT_FREE( cid->cid_font_name );
FT_FREE( cid->registry );
FT_FREE( cid->ordering );
cidface->family_name = 0;
cidface->style_name = 0;
FT_FREE( face->binary_data );
FT_FREE( face->cid_stream );
}
/*************************************************************************/
/* */
/* <Function> */
/* cid_face_init */
/* */
/* <Description> */
/* Initializes a given CID face object. */
/* */
/* <Input> */
/* stream :: The source font stream. */
/* */
/* face_index :: The index of the font face in the resource. */
/* */
/* num_params :: Number of additional generic parameters. Ignored. */
/* */
/* params :: Additional generic parameters. Ignored. */
/* */
/* <InOut> */
/* face :: The newly built face object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
cid_face_init( FT_Stream stream,
/* CID_Face */
FT_Face cidface,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
CID_Face face = (CID_Face)cidface;
FT_Error error;
PSAux_Service psaux;
PSHinter_Service pshinter;
FT_UNUSED( num_params );
FT_UNUSED( params );
FT_UNUSED( stream );
cidface->num_faces = 1;
psaux = (PSAux_Service)face->psaux;
if ( !psaux )
{
psaux = (PSAux_Service)FT_Get_Module_Interface(
FT_FACE_LIBRARY( face ), "psaux" );
if ( !psaux )
{
FT_ERROR(( "cid_face_init: cannot access `psaux' module\n" ));
error = CID_Err_Missing_Module;
goto Exit;
}
face->psaux = psaux;
}
pshinter = (PSHinter_Service)face->pshinter;
if ( !pshinter )
{
pshinter = (PSHinter_Service)FT_Get_Module_Interface(
FT_FACE_LIBRARY( face ), "pshinter" );
face->pshinter = pshinter;
}
FT_TRACE2(( "CID driver\n" ));
/* open the tokenizer; this will also check the font format */
if ( FT_STREAM_SEEK( 0 ) )
goto Exit;
error = cid_face_open( face, face_index );
if ( error )
goto Exit;
/* if we just wanted to check the format, leave successfully now */
if ( face_index < 0 )
goto Exit;
/* check the face index */
/* XXX: handle CID fonts with more than a single face */
if ( face_index != 0 )
{
FT_ERROR(( "cid_face_init: invalid face index\n" ));
error = CID_Err_Invalid_Argument;
goto Exit;
}
/* now load the font program into the face object */
/* initialize the face object fields */
/* set up root face fields */
{
CID_FaceInfo cid = &face->cid;
PS_FontInfo info = &cid->font_info;
cidface->num_glyphs = cid->cid_count;
cidface->num_charmaps = 0;
cidface->face_index = face_index;
/* scalable outlines */
cidface->face_flags = FT_FACE_FLAG_SCALABLE |
/* horizontal data */
FT_FACE_FLAG_HORIZONTAL |
/* has native hinter */
FT_FACE_FLAG_HINTER;
if ( info->is_fixed_pitch )
cidface->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;
/* XXX: TODO: add kerning with .afm support */
/* get style name -- be careful, some broken fonts only */
/* have a /FontName dictionary entry! */
cidface->family_name = info->family_name;
/* assume "Regular" style if we don't know better */
cidface->style_name = (char *)"Regular";
if ( cidface->family_name )
{
char* full = info->full_name;
char* family = cidface->family_name;
if ( full )
{
while ( *full )
{
if ( *full == *family )
{
family++;
full++;
}
else
{
if ( *full == ' ' || *full == '-' )
full++;
else if ( *family == ' ' || *family == '-' )
family++;
else
{
if ( !*family )
cidface->style_name = full;
break;
}
}
}
}
}
else
{
/* do we have a `/FontName'? */
if ( cid->cid_font_name )
cidface->family_name = cid->cid_font_name;
}
/* compute style flags */
cidface->style_flags = 0;
if ( info->italic_angle )
cidface->style_flags |= FT_STYLE_FLAG_ITALIC;
if ( info->weight )
{
if ( !ft_strcmp( info->weight, "Bold" ) ||
!ft_strcmp( info->weight, "Black" ) )
cidface->style_flags |= FT_STYLE_FLAG_BOLD;
}
/* no embedded bitmap support */
cidface->num_fixed_sizes = 0;
cidface->available_sizes = 0;
cidface->bbox.xMin = cid->font_bbox.xMin >> 16;
cidface->bbox.yMin = cid->font_bbox.yMin >> 16;
/* no `U' suffix here to 0xFFFF! */
cidface->bbox.xMax = ( cid->font_bbox.xMax + 0xFFFF ) >> 16;
cidface->bbox.yMax = ( cid->font_bbox.yMax + 0xFFFF ) >> 16;
if ( !cidface->units_per_EM )
cidface->units_per_EM = 1000;
cidface->ascender = (FT_Short)( cidface->bbox.yMax );
cidface->descender = (FT_Short)( cidface->bbox.yMin );
cidface->height = (FT_Short)( ( cidface->units_per_EM * 12 ) / 10 );
if ( cidface->height < cidface->ascender - cidface->descender )
cidface->height = (FT_Short)( cidface->ascender - cidface->descender );
cidface->underline_position = (FT_Short)info->underline_position;
cidface->underline_thickness = (FT_Short)info->underline_thickness;
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* cid_driver_init */
/* */
/* <Description> */
/* Initializes a given CID driver object. */
/* */
/* <Input> */
/* driver :: A handle to the target driver object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
cid_driver_init( FT_Module driver )
{
FT_UNUSED( driver );
return CID_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* cid_driver_done */
/* */
/* <Description> */
/* Finalizes a given CID driver. */
/* */
/* <Input> */
/* driver :: A handle to the target CID driver. */
/* */
FT_LOCAL_DEF( void )
cid_driver_done( FT_Module driver )
{
FT_UNUSED( driver );
}
/* END */
/***************************************************************************/
/* */
/* cidriver.c */
/* */
/* CID driver interface (body). */
/* */
/* Copyright 1996-2004, 2006, 2008, 2009, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* cidriver.h */
/* */
/* High-level CID driver interface (specification). */
/* */
/* Copyright 1996-2001, 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __CIDRIVER_H__
FT_BEGIN_HEADER
FT_CALLBACK_TABLE
const FT_Driver_ClassRec t1cid_driver_class;
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ciddriver
/*
* POSTSCRIPT NAME SERVICE
*
*/
static const char*
cid_get_postscript_name( CID_Face face )
{
const char* result = face->cid.cid_font_name;
if ( result && result[0] == '/' )
result++;
return result;
}
static const FT_Service_PsFontNameRec cid_service_ps_name =
{
(FT_PsName_GetFunc) cid_get_postscript_name
};
/*
* POSTSCRIPT INFO SERVICE
*
*/
static FT_Error
cid_ps_get_font_info( FT_Face face,
PS_FontInfoRec* afont_info )
{
*afont_info = ((CID_Face)face)->cid.font_info;
return CID_Err_Ok;
}
static FT_Error
cid_ps_get_font_extra( FT_Face face,
PS_FontExtraRec* afont_extra )
{
*afont_extra = ((CID_Face)face)->font_extra;
return CID_Err_Ok;
}
static const FT_Service_PsInfoRec cid_service_ps_info =
{
(PS_GetFontInfoFunc) cid_ps_get_font_info,
(PS_GetFontExtraFunc) cid_ps_get_font_extra,
/* unsupported with CID fonts */
(PS_HasGlyphNamesFunc) NULL,
/* unsupported */
(PS_GetFontPrivateFunc)NULL,
/* not implemented */
(PS_GetFontValueFunc) NULL
};
/*
* CID INFO SERVICE
*
*/
static FT_Error
cid_get_ros( CID_Face face,
const char* *registry,
const char* *ordering,
FT_Int *supplement )
{
CID_FaceInfo cid = &face->cid;
if ( registry )
*registry = cid->registry;
if ( ordering )
*ordering = cid->ordering;
if ( supplement )
*supplement = cid->supplement;
return CID_Err_Ok;
}
static FT_Error
cid_get_is_cid( CID_Face face,
FT_Bool *is_cid )
{
FT_Error error = CID_Err_Ok;
FT_UNUSED( face );
if ( is_cid )
/* cid driver is only used for CID keyed fonts */
*is_cid = 1;
return error;
}
static FT_Error
cid_get_cid_from_glyph_index( CID_Face face,
FT_UInt glyph_index,
FT_UInt *cid )
{
FT_Error error = CID_Err_Ok;
FT_UNUSED( face );
if ( cid )
/* identity mapping */
*cid = glyph_index;
return error;
}
static const FT_Service_CIDRec cid_service_cid_info =
{
(FT_CID_GetRegistryOrderingSupplementFunc)cid_get_ros,
(FT_CID_GetIsInternallyCIDKeyedFunc) cid_get_is_cid,
(FT_CID_GetCIDFromGlyphIndexFunc) cid_get_cid_from_glyph_index
};
/*
* SERVICE LIST
*
*/
static const FT_ServiceDescRec cid_services[] =
{
{ FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_CID },
{ FT_SERVICE_ID_POSTSCRIPT_FONT_NAME, &cid_service_ps_name },
{ FT_SERVICE_ID_POSTSCRIPT_INFO, &cid_service_ps_info },
{ FT_SERVICE_ID_CID, &cid_service_cid_info },
{ NULL, NULL }
};
FT_CALLBACK_DEF( FT_Module_Interface )
cid_get_interface( FT_Module module,
const char* cid_interface )
{
FT_UNUSED( module );
return ft_service_list_lookup( cid_services, cid_interface );
}
FT_CALLBACK_TABLE_DEF
const FT_Driver_ClassRec t1cid_driver_class =
{
/* first of all, the FT_Module_Class fields */
{
FT_MODULE_FONT_DRIVER |
FT_MODULE_DRIVER_SCALABLE |
FT_MODULE_DRIVER_HAS_HINTER,
sizeof ( FT_DriverRec ),
/* module name */
"t1cid",
/* version 1.0 of driver */
0x10000L,
/* requires FreeType 2.0 */
0x20000L,
0,
cid_driver_init,
cid_driver_done,
cid_get_interface
},
/* then the other font drivers fields */
sizeof ( CID_FaceRec ),
sizeof ( CID_SizeRec ),
sizeof ( CID_GlyphSlotRec ),
cid_face_init,
cid_face_done,
cid_size_init,
cid_size_done,
cid_slot_init,
cid_slot_done,
cid_slot_load_glyph,
/* FT_Face_GetKerningFunc */
0,
/* FT_Face_AttachFunc */
0,
/* FT_Face_GetAdvancesFunc */
0,
cid_size_request,
/* FT_Size_SelectFunc */
0
};
/* END */
/***************************************************************************/
/* */
/* cidgload.c */
/* */
/* CID-keyed Type1 Glyph Loader (body). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cidgload
FT_CALLBACK_DEF( FT_Error )
cid_load_glyph( T1_Decoder decoder,
FT_UInt glyph_index )
{
CID_Face face = (CID_Face)decoder->builder.face;
CID_FaceInfo cid = &face->cid;
FT_Byte* p;
FT_UInt fd_select;
FT_Stream stream = face->cid_stream;
FT_Error error = CID_Err_Ok;
FT_Byte* charstring = 0;
FT_Memory memory = face->root.memory;
FT_ULong glyph_length = 0;
PSAux_Service psaux = (PSAux_Service)face->psaux;
FT_Incremental_InterfaceRec *inc =
face->root.internal->incremental_interface;
FT_TRACE4(( "cid_load_glyph: glyph index %d\n", glyph_index ));
/* For incremental fonts get the character data using */
/* the callback function. */
if ( inc )
{
FT_Data glyph_data;
error = inc->funcs->get_glyph_data( inc->object,
glyph_index, &glyph_data );
if ( error )
goto Exit;
p = (FT_Byte*)glyph_data.pointer;
fd_select = (FT_UInt)cid_get_offset( &p, (FT_Byte)cid->fd_bytes );
if ( glyph_data.length != 0 )
{
glyph_length = glyph_data.length - cid->fd_bytes;
(void)FT_ALLOC( charstring, glyph_length );
if ( !error )
ft_memcpy( charstring, glyph_data.pointer + cid->fd_bytes,
glyph_length );
}
inc->funcs->free_glyph_data( inc->object, &glyph_data );
if ( error )
goto Exit;
}
else
/* For ordinary fonts read the CID font dictionary index */
/* and charstring offset from the CIDMap. */
{
FT_UInt entry_len = cid->fd_bytes + cid->gd_bytes;
FT_ULong off1;
if ( FT_STREAM_SEEK( cid->data_offset + cid->cidmap_offset +
glyph_index * entry_len ) ||
FT_FRAME_ENTER( 2 * entry_len ) )
goto Exit;
p = (FT_Byte*)stream->cursor;
fd_select = (FT_UInt) cid_get_offset( &p, (FT_Byte)cid->fd_bytes );
off1 = (FT_ULong)cid_get_offset( &p, (FT_Byte)cid->gd_bytes );
p += cid->fd_bytes;
glyph_length = cid_get_offset( &p, (FT_Byte)cid->gd_bytes ) - off1;
FT_FRAME_EXIT();
if ( fd_select >= (FT_UInt)cid->num_dicts )
{
error = CID_Err_Invalid_Offset;
goto Exit;
}
if ( glyph_length == 0 )
goto Exit;
if ( FT_ALLOC( charstring, glyph_length ) )
goto Exit;
if ( FT_STREAM_READ_AT( cid->data_offset + off1,
charstring, glyph_length ) )
goto Exit;
}
/* Now set up the subrs array and parse the charstrings. */
{
CID_FaceDict dict;
CID_Subrs cid_subrs = face->subrs + fd_select;
FT_Int cs_offset;
/* Set up subrs */
decoder->num_subrs = cid_subrs->num_subrs;
decoder->subrs = cid_subrs->code;
decoder->subrs_len = 0;
/* Set up font matrix */
dict = cid->font_dicts + fd_select;
decoder->font_matrix = dict->font_matrix;
decoder->font_offset = dict->font_offset;
decoder->lenIV = dict->private_dict.lenIV;
/* Decode the charstring. */
/* Adjustment for seed bytes. */
cs_offset = ( decoder->lenIV >= 0 ? decoder->lenIV : 0 );
/* Decrypt only if lenIV >= 0. */
if ( decoder->lenIV >= 0 )
psaux->t1_decrypt( charstring, glyph_length, 4330 );
error = decoder->funcs.parse_charstrings(
decoder, charstring + cs_offset,
(FT_Int)glyph_length - cs_offset );
}
FT_FREE( charstring );
/* Incremental fonts can optionally override the metrics. */
if ( !error && inc && inc->funcs->get_glyph_metrics )
{
FT_Incremental_MetricsRec metrics;
metrics.bearing_x = FIXED_TO_INT( decoder->builder.left_bearing.x );
metrics.bearing_y = 0;
metrics.advance = FIXED_TO_INT( decoder->builder.advance.x );
metrics.advance_v = FIXED_TO_INT( decoder->builder.advance.y );
error = inc->funcs->get_glyph_metrics( inc->object,
glyph_index, FALSE, &metrics );
decoder->builder.left_bearing.x = INT_TO_FIXED( metrics.bearing_x );
decoder->builder.advance.x = INT_TO_FIXED( metrics.advance );
decoder->builder.advance.y = INT_TO_FIXED( metrics.advance_v );
}
Exit:
return error;
}
#if 0
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/********** *********/
/********** *********/
/********** COMPUTE THE MAXIMUM ADVANCE WIDTH *********/
/********** *********/
/********** The following code is in charge of computing *********/
/********** the maximum advance width of the font. It *********/
/********** quickly processes each glyph charstring to *********/
/********** extract the value from either a `sbw' or `seac' *********/
/********** operator. *********/
/********** *********/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( FT_Error )
cid_face_compute_max_advance( CID_Face face,
FT_Int* max_advance )
{
FT_Error error;
T1_DecoderRec decoder;
FT_Int glyph_index;
PSAux_Service psaux = (PSAux_Service)face->psaux;
*max_advance = 0;
/* Initialize load decoder */
error = psaux->t1_decoder_funcs->init( &decoder,
(FT_Face)face,
/* size */
0,
/* glyph slot */
0,
/* glyph names! XXX */
0,
/* blend == 0 */
0,
/* hinting == 0 */
0,
cid_load_glyph );
if ( error )
return error;
/* TODO: initialize decoder.len_buildchar and decoder.buildchar */
/* if we ever support CID-keyed multiple master fonts */
decoder.builder.metrics_only = 1;
decoder.builder.load_points = 0;
/* for each glyph, parse the glyph charstring and extract */
/* the advance width */
for ( glyph_index = 0; glyph_index < face->root.num_glyphs;
glyph_index++ )
{
/* now get load the unscaled outline */
error = cid_load_glyph( &decoder, glyph_index );
/* ignore the error if one occurred - skip to next glyph */
}
*max_advance = FIXED_TO_INT( decoder.builder.advance.x );
psaux->t1_decoder_funcs->done( &decoder );
return CID_Err_Ok;
}
/* 0 */
#endif
FT_LOCAL_DEF( FT_Error )
/* CID_GlyphSlot */
cid_slot_load_glyph( FT_GlyphSlot cidglyph,
/* CID_Size */
FT_Size cidsize,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
CID_GlyphSlot glyph = (CID_GlyphSlot)cidglyph;
FT_Error error;
T1_DecoderRec decoder;
CID_Face face = (CID_Face)cidglyph->face;
FT_Bool hinting;
PSAux_Service psaux = (PSAux_Service)face->psaux;
FT_Matrix font_matrix;
FT_Vector font_offset;
if ( glyph_index >= (FT_UInt)face->root.num_glyphs )
{
error = CID_Err_Invalid_Argument;
goto Exit;
}
if ( load_flags & FT_LOAD_NO_RECURSE )
load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING;
glyph->x_scale = cidsize->metrics.x_scale;
glyph->y_scale = cidsize->metrics.y_scale;
cidglyph->outline.n_points = 0;
cidglyph->outline.n_contours = 0;
hinting = FT_BOOL( ( load_flags & FT_LOAD_NO_SCALE ) == 0 &&
( load_flags & FT_LOAD_NO_HINTING ) == 0 );
cidglyph->format = FT_GLYPH_FORMAT_OUTLINE;
error = psaux->t1_decoder_funcs->init( &decoder,
cidglyph->face,
cidsize,
cidglyph,
/* glyph names -- XXX */
0,
/* blend == 0 */
0,
hinting,
FT_LOAD_TARGET_MODE( load_flags ),
cid_load_glyph );
if ( error )
goto Exit;
/* TODO: initialize decoder.len_buildchar and decoder.buildchar */
/* if we ever support CID-keyed multiple master fonts */
/* set up the decoder */
decoder.builder.no_recurse = FT_BOOL(
( ( load_flags & FT_LOAD_NO_RECURSE ) != 0 ) );
error = cid_load_glyph( &decoder, glyph_index );
if ( error )
goto Exit;
font_matrix = decoder.font_matrix;
font_offset = decoder.font_offset;
/* save new glyph tables */
psaux->t1_decoder_funcs->done( &decoder );
/* now set the metrics -- this is rather simple, as */
/* the left side bearing is the xMin, and the top side */
/* bearing the yMax */
cidglyph->outline.flags &= FT_OUTLINE_OWNER;
cidglyph->outline.flags |= FT_OUTLINE_REVERSE_FILL;
/* for composite glyphs, return only left side bearing and */
/* advance width */
if ( load_flags & FT_LOAD_NO_RECURSE )
{
FT_Slot_Internal internal = cidglyph->internal;
cidglyph->metrics.horiBearingX =
FIXED_TO_INT( decoder.builder.left_bearing.x );
cidglyph->metrics.horiAdvance =
FIXED_TO_INT( decoder.builder.advance.x );
internal->glyph_matrix = font_matrix;
internal->glyph_delta = font_offset;
internal->glyph_transformed = 1;
}
else
{
FT_BBox cbox;
FT_Glyph_Metrics* metrics = &cidglyph->metrics;
FT_Vector advance;
/* copy the _unscaled_ advance width */
metrics->horiAdvance =
FIXED_TO_INT( decoder.builder.advance.x );
cidglyph->linearHoriAdvance =
FIXED_TO_INT( decoder.builder.advance.x );
cidglyph->internal->glyph_transformed = 0;
/* make up vertical ones */
metrics->vertAdvance = ( face->cid.font_bbox.yMax -
face->cid.font_bbox.yMin ) >> 16;
cidglyph->linearVertAdvance = metrics->vertAdvance;
cidglyph->format = FT_GLYPH_FORMAT_OUTLINE;
if ( cidsize->metrics.y_ppem < 24 )
cidglyph->outline.flags |= FT_OUTLINE_HIGH_PRECISION;
/* apply the font matrix */
FT_Outline_Transform( &cidglyph->outline, &font_matrix );
FT_Outline_Translate( &cidglyph->outline,
font_offset.x,
font_offset.y );
advance.x = metrics->horiAdvance;
advance.y = 0;
FT_Vector_Transform( &advance, &font_matrix );
metrics->horiAdvance = advance.x + font_offset.x;
advance.x = 0;
advance.y = metrics->vertAdvance;
FT_Vector_Transform( &advance, &font_matrix );
metrics->vertAdvance = advance.y + font_offset.y;
if ( ( load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
/* scale the outline and the metrics */
FT_Int n;
FT_Outline* cur = decoder.builder.base;
FT_Vector* vec = cur->points;
FT_Fixed x_scale = glyph->x_scale;
FT_Fixed y_scale = glyph->y_scale;
/* First of all, scale the points */
if ( !hinting || !decoder.builder.hints_funcs )
for ( n = cur->n_points; n > 0; n--, vec++ )
{
vec->x = FT_MulFix( vec->x, x_scale );
vec->y = FT_MulFix( vec->y, y_scale );
}
/* Then scale the metrics */
metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale );
metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, y_scale );
}
/* compute the other metrics */
FT_Outline_Get_CBox( &cidglyph->outline, &cbox );
metrics->width = cbox.xMax - cbox.xMin;
metrics->height = cbox.yMax - cbox.yMin;
metrics->horiBearingX = cbox.xMin;
metrics->horiBearingY = cbox.yMax;
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
/* make up vertical ones */
ft_synthesize_vertical_metrics( metrics,
metrics->vertAdvance );
}
}
Exit:
return error;
}
/* END */
/* END */
/***************************************************************************/
/* */
/* psaux.c */
/* */
/* FreeType auxiliary PostScript driver component (body only). */
/* */
/* Copyright 1996-2001, 2002, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* psobjs.c */
/* */
/* Auxiliary functions for PostScript fonts (body). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* psobjs.h */
/* */
/* Auxiliary functions for PostScript fonts (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSOBJS_H__
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1_TABLE *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_CALLBACK_TABLE
const PS_Table_FuncsRec ps_table_funcs;
FT_CALLBACK_TABLE
const PS_Parser_FuncsRec ps_parser_funcs;
FT_CALLBACK_TABLE
const T1_Builder_FuncsRec t1_builder_funcs;
FT_LOCAL( FT_Error )
ps_table_new( PS_Table table,
FT_Int count,
FT_Memory memory );
FT_LOCAL( FT_Error )
ps_table_add( PS_Table table,
FT_Int idx,
void* object,
FT_PtrDist length );
FT_LOCAL( void )
ps_table_done( PS_Table table );
FT_LOCAL( void )
ps_table_release( PS_Table table );
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1 PARSER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL( void )
ps_parser_skip_spaces( PS_Parser parser );
FT_LOCAL( void )
ps_parser_skip_PS_token( PS_Parser parser );
FT_LOCAL( void )
ps_parser_to_token( PS_Parser parser,
T1_Token token );
FT_LOCAL( void )
ps_parser_to_token_array( PS_Parser parser,
T1_Token tokens,
FT_UInt max_tokens,
FT_Int* pnum_tokens );
FT_LOCAL( FT_Error )
ps_parser_load_field( PS_Parser parser,
const T1_Field field,
void** objects,
FT_UInt max_objects,
FT_ULong* pflags );
FT_LOCAL( FT_Error )
ps_parser_load_field_table( PS_Parser parser,
const T1_Field field,
void** objects,
FT_UInt max_objects,
FT_ULong* pflags );
FT_LOCAL( FT_Long )
ps_parser_to_int( PS_Parser parser );
FT_LOCAL( FT_Error )
ps_parser_to_bytes( PS_Parser parser,
FT_Byte* bytes,
FT_Offset max_bytes,
FT_Long* pnum_bytes,
FT_Bool delimiters );
FT_LOCAL( FT_Fixed )
ps_parser_to_fixed( PS_Parser parser,
FT_Int power_ten );
FT_LOCAL( FT_Int )
ps_parser_to_coord_array( PS_Parser parser,
FT_Int max_coords,
FT_Short* coords );
FT_LOCAL( FT_Int )
ps_parser_to_fixed_array( PS_Parser parser,
FT_Int max_values,
FT_Fixed* values,
FT_Int power_ten );
FT_LOCAL( void )
ps_parser_init( PS_Parser parser,
FT_Byte* base,
FT_Byte* limit,
FT_Memory memory );
FT_LOCAL( void )
ps_parser_done( PS_Parser parser );
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1 BUILDER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL( void )
t1_builder_init( T1_Builder builder,
FT_Face face,
FT_Size size,
FT_GlyphSlot glyph,
FT_Bool hinting );
FT_LOCAL( void )
t1_builder_done( T1_Builder builder );
FT_LOCAL( FT_Error )
t1_builder_check_points( T1_Builder builder,
FT_Int count );
FT_LOCAL( void )
t1_builder_add_point( T1_Builder builder,
FT_Pos x,
FT_Pos y,
FT_Byte flag );
FT_LOCAL( FT_Error )
t1_builder_add_point1( T1_Builder builder,
FT_Pos x,
FT_Pos y );
FT_LOCAL( FT_Error )
t1_builder_add_contour( T1_Builder builder );
FT_LOCAL( FT_Error )
t1_builder_start_point( T1_Builder builder,
FT_Pos x,
FT_Pos y );
FT_LOCAL( void )
t1_builder_close_contour( T1_Builder builder );
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** OTHER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL( void )
t1_decrypt( FT_Byte* buffer,
FT_Offset length,
FT_UShort seed );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* psconv.h */
/* */
/* Some convenience conversions (specification). */
/* */
/* Copyright 2006, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSCONV_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Long )
PS_Conv_Strtol( FT_Byte** cursor,
FT_Byte* limit,
FT_Long base );
FT_LOCAL( FT_Long )
PS_Conv_ToInt( FT_Byte** cursor,
FT_Byte* limit );
FT_LOCAL( FT_Fixed )
PS_Conv_ToFixed( FT_Byte** cursor,
FT_Byte* limit,
FT_Long power_ten );
#if 0
FT_LOCAL( FT_UInt )
PS_Conv_StringDecode( FT_Byte** cursor,
FT_Byte* limit,
FT_Byte* buffer,
FT_Offset n );
#endif
FT_LOCAL( FT_UInt )
PS_Conv_ASCIIHexDecode( FT_Byte** cursor,
FT_Byte* limit,
FT_Byte* buffer,
FT_Offset n );
FT_LOCAL( FT_UInt )
PS_Conv_EexecDecode( FT_Byte** cursor,
FT_Byte* limit,
FT_Byte* buffer,
FT_Offset n,
FT_UShort* seed );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* psauxerr.h */
/* */
/* PS auxiliary module error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the PS auxiliary module error enumeration */
/* constants. */
/* */
/*************************************************************************/
#define __PSAUXERR_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX PSaux_Err_
#define FT_ERR_BASE FT_Mod_Err_PSaux
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_psobjs
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PS_TABLE *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* ps_table_new */
/* */
/* <Description> */
/* Initializes a PS_Table. */
/* */
/* <InOut> */
/* table :: The address of the target table. */
/* */
/* <Input> */
/* count :: The table size = the maximum number of elements. */
/* */
/* memory :: The memory object to use for all subsequent */
/* reallocations. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
ps_table_new( PS_Table table,
FT_Int count,
FT_Memory memory )
{
FT_Error error;
table->memory = memory;
if ( FT_NEW_ARRAY( table->elements, count ) ||
FT_NEW_ARRAY( table->lengths, count ) )
goto Exit;
table->max_elems = count;
table->init = 0xDEADBEEFUL;
table->num_elems = 0;
table->block = 0;
table->capacity = 0;
table->cursor = 0;
*(PS_Table_FuncsRec*)&table->funcs = ps_table_funcs;
Exit:
if ( error )
FT_FREE( table->elements );
return error;
}
static void
shift_elements( PS_Table table,
FT_Byte* old_base )
{
FT_PtrDist delta = table->block - old_base;
FT_Byte** offset = table->elements;
FT_Byte** limit = offset + table->max_elems;
for ( ; offset < limit; offset++ )
{
if ( offset[0] )
offset[0] += delta;
}
}
static FT_Error
reallocate_t1_table( PS_Table table,
FT_Long new_size )
{
FT_Memory memory = table->memory;
FT_Byte* old_base = table->block;
FT_Error error;
/* allocate new base block */
if ( FT_ALLOC( table->block, new_size ) )
{
table->block = old_base;
return error;
}
/* copy elements and shift offsets */
if ( old_base )
{
FT_MEM_COPY( table->block, old_base, table->capacity );
shift_elements( table, old_base );
FT_FREE( old_base );
}
table->capacity = new_size;
return PSaux_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* ps_table_add */
/* */
/* <Description> */
/* Adds an object to a PS_Table, possibly growing its memory block. */
/* */
/* <InOut> */
/* table :: The target table. */
/* */
/* <Input> */
/* idx :: The index of the object in the table. */
/* */
/* object :: The address of the object to copy in memory. */
/* */
/* length :: The length in bytes of the source object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. An error is returned if a */
/* reallocation fails. */
/* */
FT_LOCAL_DEF( FT_Error )
ps_table_add( PS_Table table,
FT_Int idx,
void* object,
FT_PtrDist length )
{
if ( idx < 0 || idx >= table->max_elems )
{
FT_ERROR(( "ps_table_add: invalid index\n" ));
return PSaux_Err_Invalid_Argument;
}
if ( length < 0 )
{
FT_ERROR(( "ps_table_add: invalid length\n" ));
return PSaux_Err_Invalid_Argument;
}
/* grow the base block if needed */
if ( table->cursor + length > table->capacity )
{
FT_Error error;
FT_Offset new_size = table->capacity;
FT_PtrDist in_offset;
in_offset = (FT_Byte*)object - table->block;
if ( in_offset < 0 || (FT_Offset)in_offset >= table->capacity )
in_offset = -1;
while ( new_size < table->cursor + length )
{
/* increase size by 25% and round up to the nearest multiple
of 1024 */
new_size += ( new_size >> 2 ) + 1;
new_size = FT_PAD_CEIL( new_size, 1024 );
}
error = reallocate_t1_table( table, new_size );
if ( error )
return error;
if ( in_offset >= 0 )
object = table->block + in_offset;
}
/* add the object to the base block and adjust offset */
table->elements[idx] = table->block + table->cursor;
table->lengths [idx] = length;
FT_MEM_COPY( table->block + table->cursor, object, length );
table->cursor += length;
return PSaux_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* ps_table_done */
/* */
/* <Description> */
/* Finalizes a PS_TableRec (i.e., reallocate it to its current */
/* cursor). */
/* */
/* <InOut> */
/* table :: The target table. */
/* */
/* <Note> */
/* This function does NOT release the heap's memory block. It is up */
/* to the caller to clean it, or reference it in its own structures. */
/* */
FT_LOCAL_DEF( void )
ps_table_done( PS_Table table )
{
FT_Memory memory = table->memory;
FT_Error error;
FT_Byte* old_base = table->block;
/* should never fail, because rec.cursor <= rec.size */
if ( !old_base )
return;
if ( FT_ALLOC( table->block, table->cursor ) )
return;
FT_MEM_COPY( table->block, old_base, table->cursor );
shift_elements( table, old_base );
table->capacity = table->cursor;
FT_FREE( old_base );
FT_UNUSED( error );
}
FT_LOCAL_DEF( void )
ps_table_release( PS_Table table )
{
FT_Memory memory = table->memory;
if ( (FT_ULong)table->init == 0xDEADBEEFUL )
{
FT_FREE( table->block );
FT_FREE( table->elements );
FT_FREE( table->lengths );
table->init = 0;
}
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1 PARSER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* first character must be already part of the comment */
static void
skip_comment( FT_Byte* *acur,
FT_Byte* limit )
{
FT_Byte* cur = *acur;
while ( cur < limit )
{
if ( IS_PS_NEWLINE( *cur ) )
break;
cur++;
}
*acur = cur;
}
static void
skip_spaces( FT_Byte* *acur,
FT_Byte* limit )
{
FT_Byte* cur = *acur;
while ( cur < limit )
{
if ( !IS_PS_SPACE( *cur ) )
{
if ( *cur == '%' )
/* According to the PLRM, a comment is equal to a space. */
skip_comment( &cur, limit );
else
break;
}
cur++;
}
*acur = cur;
}
#define IS_OCTAL_DIGIT( c ) ( '0' <= (c) && (c) <= '7' )
/* first character must be `('; */
/* *acur is positioned at the character after the closing `)' */
static FT_Error
skip_literal_string( FT_Byte* *acur,
FT_Byte* limit )
{
FT_Byte* cur = *acur;
FT_Int embed = 0;
FT_Error error = PSaux_Err_Invalid_File_Format;
unsigned int i;
while ( cur < limit )
{
FT_Byte c = *cur;
++cur;
if ( c == '\\' )
{
/* Red Book 3rd ed., section `Literal Text Strings', p. 29: */
/* A backslash can introduce three different types */
/* of escape sequences: */
/* - a special escaped char like \r, \n, etc. */
/* - a one-, two-, or three-digit octal number */
/* - none of the above in which case the backslash is ignored */
if ( cur == limit )
/* error (or to be ignored?) */
break;
switch ( *cur )
{
/* skip `special' escape */
case 'n':
case 'r':
case 't':
case 'b':
case 'f':
case '\\':
case '(':
case ')':
++cur;
break;
default:
/* skip octal escape or ignore backslash */
for ( i = 0; i < 3 && cur < limit; ++i )
{
if ( !IS_OCTAL_DIGIT( *cur ) )
break;
++cur;
}
}
}
else if ( c == '(' )
embed++;
else if ( c == ')' )
{
embed--;
if ( embed == 0 )
{
error = PSaux_Err_Ok;
break;
}
}
}
*acur = cur;
return error;
}
/* first character must be `<' */
static FT_Error
skip_string( FT_Byte* *acur,
FT_Byte* limit )
{
FT_Byte* cur = *acur;
FT_Error err = PSaux_Err_Ok;
while ( ++cur < limit )
{
/* All whitespace characters are ignored. */
skip_spaces( &cur, limit );
if ( cur >= limit )
break;
if ( !IS_PS_XDIGIT( *cur ) )
break;
}
if ( cur < limit && *cur != '>' )
{
FT_ERROR(( "skip_string: missing closing delimiter `>'\n" ));
err = PSaux_Err_Invalid_File_Format;
}
else
cur++;
*acur = cur;
return err;
}
/* first character must be the opening brace that */
/* starts the procedure */
/* NB: [ and ] need not match: */
/* `/foo {[} def' is a valid PostScript fragment, */
/* even within a Type1 font */
static FT_Error
skip_procedure( FT_Byte* *acur,
FT_Byte* limit )
{
FT_Byte* cur;
FT_Int embed = 0;
FT_Error error = PSaux_Err_Ok;
FT_ASSERT( **acur == '{' );
for ( cur = *acur; cur < limit && error == PSaux_Err_Ok; ++cur )
{
switch ( *cur )
{
case '{':
++embed;
break;
case '}':
--embed;
if ( embed == 0 )
{
++cur;
goto end;
}
break;
case '(':
error = skip_literal_string( &cur, limit );
break;
case '<':
error = skip_string( &cur, limit );
break;
case '%':
skip_comment( &cur, limit );
break;
}
}
end:
if ( embed != 0 )
error = PSaux_Err_Invalid_File_Format;
*acur = cur;
return error;
}
/***********************************************************************/
/* */
/* All exported parsing routines handle leading whitespace and stop at */
/* the first character which isn't part of the just handled token. */
/* */
/***********************************************************************/
FT_LOCAL_DEF( void )
ps_parser_skip_PS_token( PS_Parser parser )
{
/* Note: PostScript allows any non-delimiting, non-whitespace */
/* character in a name (PS Ref Manual, 3rd ed, p31). */
/* PostScript delimiters are (, ), <, >, [, ], {, }, /, and %. */
FT_Byte* cur = parser->cursor;
FT_Byte* limit = parser->limit;
FT_Error error = PSaux_Err_Ok;
/* this also skips comments */
skip_spaces( &cur, limit );
if ( cur >= limit )
goto Exit;
/* self-delimiting, single-character tokens */
if ( *cur == '[' || *cur == ']' )
{
cur++;
goto Exit;
}
/* skip balanced expressions (procedures and strings) */
/* {...} */
if ( *cur == '{' )
{
error = skip_procedure( &cur, limit );
goto Exit;
}
/* (...) */
if ( *cur == '(' )
{
error = skip_literal_string( &cur, limit );
goto Exit;
}
/* <...> */
if ( *cur == '<' )
{
/* << */
if ( cur + 1 < limit && *(cur + 1) == '<' )
{
cur++;
cur++;
}
else
error = skip_string( &cur, limit );
goto Exit;
}
if ( *cur == '>' )
{
cur++;
/* >> */
if ( cur >= limit || *cur != '>' )
{
FT_ERROR(( "ps_parser_skip_PS_token:"
" unexpected closing delimiter `>'\n" ));
error = PSaux_Err_Invalid_File_Format;
goto Exit;
}
cur++;
goto Exit;
}
if ( *cur == '/' )
cur++;
/* anything else */
while ( cur < limit )
{
/* *cur might be invalid (e.g., ')' or '}'), but this */
/* is handled by the test `cur == parser->cursor' below */
if ( IS_PS_DELIM( *cur ) )
break;
cur++;
}
Exit:
if ( cur < limit && cur == parser->cursor )
{
FT_ERROR(( "ps_parser_skip_PS_token:"
" current token is `%c' which is self-delimiting\n"
" "
" but invalid at this point\n",
*cur ));
error = PSaux_Err_Invalid_File_Format;
}
parser->error = error;
parser->cursor = cur;
}
FT_LOCAL_DEF( void )
ps_parser_skip_spaces( PS_Parser parser )
{
skip_spaces( &parser->cursor, parser->limit );
}
/* `token' here means either something between balanced delimiters */
/* or the next token; the delimiters are not removed. */
FT_LOCAL_DEF( void )
ps_parser_to_token( PS_Parser parser,
T1_Token token )
{
FT_Byte* cur;
FT_Byte* limit;
FT_Int embed;
token->type = T1_TOKEN_TYPE_NONE;
token->start = 0;
token->limit = 0;
/* first of all, skip leading whitespace */
ps_parser_skip_spaces( parser );
cur = parser->cursor;
limit = parser->limit;
if ( cur >= limit )
return;
switch ( *cur )
{
/************* check for literal string *****************/
case '(':
token->type = T1_TOKEN_TYPE_STRING;
token->start = cur;
if ( skip_literal_string( &cur, limit ) == PSaux_Err_Ok )
token->limit = cur;
break;
/************* check for programs/array *****************/
case '{':
token->type = T1_TOKEN_TYPE_ARRAY;
token->start = cur;
if ( skip_procedure( &cur, limit ) == PSaux_Err_Ok )
token->limit = cur;
break;
/************* check for table/array ********************/
/* XXX: in theory we should also look for "<<" */
/* since this is semantically equivalent to "["; */
/* in practice it doesn't matter (?) */
case '[':
token->type = T1_TOKEN_TYPE_ARRAY;
embed = 1;
token->start = cur++;
/* we need this to catch `[ ]' */
parser->cursor = cur;
ps_parser_skip_spaces( parser );
cur = parser->cursor;
while ( cur < limit && !parser->error )
{
/* XXX: this is wrong because it does not */
/* skip comments, procedures, and strings */
if ( *cur == '[' )
embed++;
else if ( *cur == ']' )
{
embed--;
if ( embed <= 0 )
{
token->limit = ++cur;
break;
}
}
parser->cursor = cur;
ps_parser_skip_PS_token( parser );
/* we need this to catch `[XXX ]' */
ps_parser_skip_spaces ( parser );
cur = parser->cursor;
}
break;
/* ************ otherwise, it is any token **************/
default:
token->start = cur;
token->type = ( *cur == '/' ? T1_TOKEN_TYPE_KEY : T1_TOKEN_TYPE_ANY );
ps_parser_skip_PS_token( parser );
cur = parser->cursor;
if ( !parser->error )
token->limit = cur;
}
if ( !token->limit )
{
token->start = 0;
token->type = T1_TOKEN_TYPE_NONE;
}
parser->cursor = cur;
}
/* NB: `tokens' can be NULL if we only want to count */
/* the number of array elements */
FT_LOCAL_DEF( void )
ps_parser_to_token_array( PS_Parser parser,
T1_Token tokens,
FT_UInt max_tokens,
FT_Int* pnum_tokens )
{
T1_TokenRec master;
*pnum_tokens = -1;
/* this also handles leading whitespace */
ps_parser_to_token( parser, &master );
if ( master.type == T1_TOKEN_TYPE_ARRAY )
{
FT_Byte* old_cursor = parser->cursor;
FT_Byte* old_limit = parser->limit;
T1_Token cur = tokens;
T1_Token limit = cur + max_tokens;
/* don't include outermost delimiters */
parser->cursor = master.start + 1;
parser->limit = master.limit - 1;
while ( parser->cursor < parser->limit )
{
T1_TokenRec token;
ps_parser_to_token( parser, &token );
if ( !token.type )
break;
if ( tokens != NULL && cur < limit )
*cur = token;
cur++;
}
*pnum_tokens = (FT_Int)( cur - tokens );
parser->cursor = old_cursor;
parser->limit = old_limit;
}
}
/* first character must be a delimiter or a part of a number */
/* NB: `coords' can be NULL if we just want to skip the */
/* array; in this case we ignore `max_coords' */
static FT_Int
ps_tocoordarray( FT_Byte* *acur,
FT_Byte* limit,
FT_Int max_coords,
FT_Short* coords )
{
FT_Byte* cur = *acur;
FT_Int count = 0;
FT_Byte c, ender;
if ( cur >= limit )
goto Exit;
/* check for the beginning of an array; otherwise, only one number */
/* will be read */
c = *cur;
ender = 0;
if ( c == '[' )
ender = ']';
else if ( c == '{' )
ender = '}';
if ( ender )
cur++;
/* now, read the coordinates */
while ( cur < limit )
{
FT_Short dummy;
FT_Byte* old_cur;
/* skip whitespace in front of data */
skip_spaces( &cur, limit );
if ( cur >= limit )
goto Exit;
if ( *cur == ender )
{
cur++;
break;
}
old_cur = cur;
if ( coords != NULL && count >= max_coords )
break;
/* call PS_Conv_ToFixed() even if coords == NULL */
/* to properly parse number at `cur' */
*( coords != NULL ? &coords[count] : &dummy ) =
(FT_Short)( PS_Conv_ToFixed( &cur, limit, 0 ) >> 16 );
if ( old_cur == cur )
{
count = -1;
goto Exit;
}
else
count++;
if ( !ender )
break;
}
Exit:
*acur = cur;
return count;
}
/* first character must be a delimiter or a part of a number */
/* NB: `values' can be NULL if we just want to skip the */
/* array; in this case we ignore `max_values' */
static FT_Int
ps_tofixedarray( FT_Byte* *acur,
FT_Byte* limit,
FT_Int max_values,
FT_Fixed* values,
FT_Int power_ten )
{
FT_Byte* cur = *acur;
FT_Int count = 0;
FT_Byte c, ender;
if ( cur >= limit )
goto Exit;
/* Check for the beginning of an array. Otherwise, only one number */
/* will be read. */
c = *cur;
ender = 0;
if ( c == '[' )
ender = ']';
else if ( c == '{' )
ender = '}';
if ( ender )
cur++;
/* now, read the values */
while ( cur < limit )
{
FT_Fixed dummy;
FT_Byte* old_cur;
/* skip whitespace in front of data */
skip_spaces( &cur, limit );
if ( cur >= limit )
goto Exit;
if ( *cur == ender )
{
cur++;
break;
}
old_cur = cur;
if ( values != NULL && count >= max_values )
break;
/* call PS_Conv_ToFixed() even if coords == NULL */
/* to properly parse number at `cur' */
*( values != NULL ? &values[count] : &dummy ) =
PS_Conv_ToFixed( &cur, limit, power_ten );
if ( old_cur == cur )
{
count = -1;
goto Exit;
}
else
count++;
if ( !ender )
break;
}
Exit:
*acur = cur;
return count;
}
#if 0
static FT_String*
ps_tostring( FT_Byte** cursor,
FT_Byte* limit,
FT_Memory memory )
{
FT_Byte* cur = *cursor;
FT_PtrDist len = 0;
FT_Int count;
FT_String* result;
FT_Error error;
/* XXX: some stupid fonts have a `Notice' or `Copyright' string */
/* that simply doesn't begin with an opening parenthesis, even */
/* though they have a closing one! E.g. "amuncial.pfb" */
/* */
/* We must deal with these ill-fated cases there. Note that */
/* these fonts didn't work with the old Type 1 driver as the */
/* notice/copyright was not recognized as a valid string token */
/* and made the old token parser commit errors. */
while ( cur < limit && ( *cur == ' ' || *cur == '\t' ) )
cur++;
if ( cur + 1 >= limit )
return 0;
if ( *cur == '(' )
/* skip the opening parenthesis, if there is one */
cur++;
*cursor = cur;
count = 0;
/* then, count its length */
for ( ; cur < limit; cur++ )
{
if ( *cur == '(' )
count++;
else if ( *cur == ')' )
{
count--;
if ( count < 0 )
break;
}
}
len = cur - *cursor;
if ( cur >= limit || FT_ALLOC( result, len + 1 ) )
return 0;
/* now copy the string */
FT_MEM_COPY( result, *cursor, len );
result[len] = '\0';
*cursor = cur;
return result;
}
/* 0 */
#endif
static int
ps_tobool( FT_Byte* *acur,
FT_Byte* limit )
{
FT_Byte* cur = *acur;
FT_Bool result = 0;
/* return 1 if we find `true', 0 otherwise */
if ( cur + 3 < limit &&
cur[0] == 't' &&
cur[1] == 'r' &&
cur[2] == 'u' &&
cur[3] == 'e' )
{
result = 1;
cur += 5;
}
else if ( cur + 4 < limit &&
cur[0] == 'f' &&
cur[1] == 'a' &&
cur[2] == 'l' &&
cur[3] == 's' &&
cur[4] == 'e' )
{
result = 0;
cur += 6;
}
*acur = cur;
return result;
}
/* load a simple field (i.e. non-table) into the current list of objects */
FT_LOCAL_DEF( FT_Error )
ps_parser_load_field( PS_Parser parser,
const T1_Field field,
void** objects,
FT_UInt max_objects,
FT_ULong* pflags )
{
T1_TokenRec token;
FT_Byte* cur;
FT_Byte* limit;
FT_UInt count;
FT_UInt idx;
FT_Error error;
/* this also skips leading whitespace */
ps_parser_to_token( parser, &token );
if ( !token.type )
goto Fail;
count = 1;
idx = 0;
cur = token.start;
limit = token.limit;
/* we must detect arrays in /FontBBox */
if ( field->type == T1_FIELD_TYPE_BBOX )
{
T1_TokenRec token2;
FT_Byte* old_cur = parser->cursor;
FT_Byte* old_limit = parser->limit;
/* don't include delimiters */
parser->cursor = token.start + 1;
parser->limit = token.limit - 1;
ps_parser_to_token( parser, &token2 );
parser->cursor = old_cur;
parser->limit = old_limit;
if ( token2.type == T1_TOKEN_TYPE_ARRAY )
goto FieldArray;
}
else if ( token.type == T1_TOKEN_TYPE_ARRAY )
{
FieldArray:
/* if this is an array and we have no blend, an error occurs */
if ( max_objects == 0 )
goto Fail;
count = max_objects;
idx = 1;
/* don't include delimiters */
cur++;
limit--;
}
for ( ; count > 0; count--, idx++ )
{
FT_Byte* q = (FT_Byte*)objects[idx] + field->offset;
FT_Long val;
FT_String* string;
skip_spaces( &cur, limit );
switch ( field->type )
{
case T1_FIELD_TYPE_BOOL:
val = ps_tobool( &cur, limit );
goto Store_Integer;
case T1_FIELD_TYPE_FIXED:
val = PS_Conv_ToFixed( &cur, limit, 0 );
goto Store_Integer;
case T1_FIELD_TYPE_FIXED_1000:
val = PS_Conv_ToFixed( &cur, limit, 3 );
goto Store_Integer;
case T1_FIELD_TYPE_INTEGER:
val = PS_Conv_ToInt( &cur, limit );
/* fall through */
Store_Integer:
switch ( field->size )
{
case (8 / FT_CHAR_BIT):
*(FT_Byte*)q = (FT_Byte)val;
break;
case (16 / FT_CHAR_BIT):
*(FT_UShort*)q = (FT_UShort)val;
break;
case (32 / FT_CHAR_BIT):
*(FT_UInt32*)q = (FT_UInt32)val;
break;
/* for 64-bit systems */
default:
*(FT_Long*)q = val;
}
break;
case T1_FIELD_TYPE_STRING:
case T1_FIELD_TYPE_KEY:
{
FT_Memory memory = parser->memory;
FT_UInt len = (FT_UInt)( limit - cur );
if ( cur >= limit )
break;
/* we allow both a string or a name */
/* for cases like /FontName (foo) def */
if ( token.type == T1_TOKEN_TYPE_KEY )
{
/* don't include leading `/' */
len--;
cur++;
}
else if ( token.type == T1_TOKEN_TYPE_STRING )
{
/* don't include delimiting parentheses */
/* XXX we don't handle <<...>> here */
/* XXX should we convert octal escapes? */
/* if so, what encoding should we use? */
cur++;
len -= 2;
}
else
{
FT_ERROR(( "ps_parser_load_field:"
" expected a name or string\n"
" "
" but found token of type %d instead\n",
token.type ));
error = PSaux_Err_Invalid_File_Format;
goto Exit;
}
/* for this to work (FT_String**)q must have been */
/* initialized to NULL */
if ( *(FT_String**)q != NULL )
{
FT_TRACE0(( "ps_parser_load_field: overwriting field %s\n",
field->ident ));
FT_FREE( *(FT_String**)q );
*(FT_String**)q = NULL;
}
if ( FT_ALLOC( string, len + 1 ) )
goto Exit;
FT_MEM_COPY( string, cur, len );
string[len] = 0;
*(FT_String**)q = string;
}
break;
case T1_FIELD_TYPE_BBOX:
{
FT_Fixed temp[4];
FT_BBox* bbox = (FT_BBox*)q;
FT_Int result;
result = ps_tofixedarray( &cur, limit, 4, temp, 0 );
if ( result < 0 )
{
FT_ERROR(( "ps_parser_load_field:"
" expected four integers in bounding box\n" ));
error = PSaux_Err_Invalid_File_Format;
goto Exit;
}
bbox->xMin = FT_RoundFix( temp[0] );
bbox->yMin = FT_RoundFix( temp[1] );
bbox->xMax = FT_RoundFix( temp[2] );
bbox->yMax = FT_RoundFix( temp[3] );
}
break;
default:
/* an error occurred */
goto Fail;
}
}
/* obsolete -- keep for reference */
#if 0
if ( pflags )
*pflags |= 1L << field->flag_bit;
#else
FT_UNUSED( pflags );
#endif
error = PSaux_Err_Ok;
Exit:
return error;
Fail:
error = PSaux_Err_Invalid_File_Format;
goto Exit;
}
#define T1_MAX_TABLE_ELEMENTS 32
FT_LOCAL_DEF( FT_Error )
ps_parser_load_field_table( PS_Parser parser,
const T1_Field field,
void** objects,
FT_UInt max_objects,
FT_ULong* pflags )
{
T1_TokenRec elements[T1_MAX_TABLE_ELEMENTS];
T1_Token token;
FT_Int num_elements;
FT_Error error = PSaux_Err_Ok;
FT_Byte* old_cursor;
FT_Byte* old_limit;
T1_FieldRec fieldrec = *(T1_Field)field;
fieldrec.type = T1_FIELD_TYPE_INTEGER;
if ( field->type == T1_FIELD_TYPE_FIXED_ARRAY ||
field->type == T1_FIELD_TYPE_BBOX )
fieldrec.type = T1_FIELD_TYPE_FIXED;
ps_parser_to_token_array( parser, elements,
T1_MAX_TABLE_ELEMENTS, &num_elements );
if ( num_elements < 0 )
{
error = PSaux_Err_Ignore;
goto Exit;
}
if ( (FT_UInt)num_elements > field->array_max )
num_elements = field->array_max;
old_cursor = parser->cursor;
old_limit = parser->limit;
/* we store the elements count if necessary; */
/* we further assume that `count_offset' can't be zero */
if ( field->type != T1_FIELD_TYPE_BBOX && field->count_offset != 0 )
*(FT_Byte*)( (FT_Byte*)objects[0] + field->count_offset ) =
(FT_Byte)num_elements;
/* we now load each element, adjusting the field.offset on each one */
token = elements;
for ( ; num_elements > 0; num_elements--, token++ )
{
parser->cursor = token->start;
parser->limit = token->limit;
ps_parser_load_field( parser, &fieldrec, objects, max_objects, 0 );
fieldrec.offset += fieldrec.size;
}
/* obsolete -- keep for reference */
#if 0
if ( pflags )
*pflags |= 1L << field->flag_bit;
#else
FT_UNUSED( pflags );
#endif
parser->cursor = old_cursor;
parser->limit = old_limit;
Exit:
return error;
}
FT_LOCAL_DEF( FT_Long )
ps_parser_to_int( PS_Parser parser )
{
ps_parser_skip_spaces( parser );
return PS_Conv_ToInt( &parser->cursor, parser->limit );
}
/* first character must be `<' if `delimiters' is non-zero */
FT_LOCAL_DEF( FT_Error )
ps_parser_to_bytes( PS_Parser parser,
FT_Byte* bytes,
FT_Offset max_bytes,
FT_Long* pnum_bytes,
FT_Bool delimiters )
{
FT_Error error = PSaux_Err_Ok;
FT_Byte* cur;
ps_parser_skip_spaces( parser );
cur = parser->cursor;
if ( cur >= parser->limit )
goto Exit;
if ( delimiters )
{
if ( *cur != '<' )
{
FT_ERROR(( "ps_parser_to_bytes: Missing starting delimiter `<'\n" ));
error = PSaux_Err_Invalid_File_Format;
goto Exit;
}
cur++;
}
*pnum_bytes = PS_Conv_ASCIIHexDecode( &cur,
parser->limit,
bytes,
max_bytes );
if ( delimiters )
{
if ( cur < parser->limit && *cur != '>' )
{
FT_ERROR(( "ps_parser_to_bytes: Missing closing delimiter `>'\n" ));
error = PSaux_Err_Invalid_File_Format;
goto Exit;
}
cur++;
}
parser->cursor = cur;
Exit:
return error;
}
FT_LOCAL_DEF( FT_Fixed )
ps_parser_to_fixed( PS_Parser parser,
FT_Int power_ten )
{
ps_parser_skip_spaces( parser );
return PS_Conv_ToFixed( &parser->cursor, parser->limit, power_ten );
}
FT_LOCAL_DEF( FT_Int )
ps_parser_to_coord_array( PS_Parser parser,
FT_Int max_coords,
FT_Short* coords )
{
ps_parser_skip_spaces( parser );
return ps_tocoordarray( &parser->cursor, parser->limit,
max_coords, coords );
}
FT_LOCAL_DEF( FT_Int )
ps_parser_to_fixed_array( PS_Parser parser,
FT_Int max_values,
FT_Fixed* values,
FT_Int power_ten )
{
ps_parser_skip_spaces( parser );
return ps_tofixedarray( &parser->cursor, parser->limit,
max_values, values, power_ten );
}
#if 0
FT_LOCAL_DEF( FT_String* )
T1_ToString( PS_Parser parser )
{
return ps_tostring( &parser->cursor, parser->limit, parser->memory );
}
FT_LOCAL_DEF( FT_Bool )
T1_ToBool( PS_Parser parser )
{
return ps_tobool( &parser->cursor, parser->limit );
}
/* 0 */
#endif
FT_LOCAL_DEF( void )
ps_parser_init( PS_Parser parser,
FT_Byte* base,
FT_Byte* limit,
FT_Memory memory )
{
parser->error = PSaux_Err_Ok;
parser->base = base;
parser->limit = limit;
parser->cursor = base;
parser->memory = memory;
parser->funcs = ps_parser_funcs;
}
FT_LOCAL_DEF( void )
ps_parser_done( PS_Parser parser )
{
FT_UNUSED( parser );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** T1 BUILDER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* t1_builder_init */
/* */
/* <Description> */
/* Initializes a given glyph builder. */
/* */
/* <InOut> */
/* builder :: A pointer to the glyph builder to initialize. */
/* */
/* <Input> */
/* face :: The current face object. */
/* */
/* size :: The current size object. */
/* */
/* glyph :: The current glyph object. */
/* */
/* hinting :: Whether hinting should be applied. */
/* */
FT_LOCAL_DEF( void )
t1_builder_init( T1_Builder builder,
FT_Face face,
FT_Size size,
FT_GlyphSlot glyph,
FT_Bool hinting )
{
builder->parse_state = T1_Parse_Start;
builder->load_points = 1;
builder->face = face;
builder->glyph = glyph;
builder->memory = face->memory;
if ( glyph )
{
FT_GlyphLoader loader = glyph->internal->loader;
builder->loader = loader;
builder->base = &loader->base.outline;
builder->current = &loader->current.outline;
FT_GlyphLoader_Rewind( loader );
builder->hints_globals = size->internal;
builder->hints_funcs = 0;
if ( hinting )
builder->hints_funcs = glyph->internal->glyph_hints;
}
builder->pos_x = 0;
builder->pos_y = 0;
builder->left_bearing.x = 0;
builder->left_bearing.y = 0;
builder->advance.x = 0;
builder->advance.y = 0;
builder->funcs = t1_builder_funcs;
}
/*************************************************************************/
/* */
/* <Function> */
/* t1_builder_done */
/* */
/* <Description> */
/* Finalizes a given glyph builder. Its contents can still be used */
/* after the call, but the function saves important information */
/* within the corresponding glyph slot. */
/* */
/* <Input> */
/* builder :: A pointer to the glyph builder to finalize. */
/* */
FT_LOCAL_DEF( void )
t1_builder_done( T1_Builder builder )
{
FT_GlyphSlot glyph = builder->glyph;
if ( glyph )
glyph->outline = *builder->base;
}
/* check that there is enough space for `count' more points */
FT_LOCAL_DEF( FT_Error )
t1_builder_check_points( T1_Builder builder,
FT_Int count )
{
return FT_GLYPHLOADER_CHECK_POINTS( builder->loader, count, 0 );
}
/* add a new point, do not check space */
FT_LOCAL_DEF( void )
t1_builder_add_point( T1_Builder builder,
FT_Pos x,
FT_Pos y,
FT_Byte flag )
{
FT_Outline* outline = builder->current;
if ( builder->load_points )
{
FT_Vector* point = outline->points + outline->n_points;
FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points;
point->x = FIXED_TO_INT( x );
point->y = FIXED_TO_INT( y );
*control = (FT_Byte)( flag ? FT_CURVE_TAG_ON : FT_CURVE_TAG_CUBIC );
}
outline->n_points++;
}
/* check space for a new on-curve point, then add it */
FT_LOCAL_DEF( FT_Error )
t1_builder_add_point1( T1_Builder builder,
FT_Pos x,
FT_Pos y )
{
FT_Error error;
error = t1_builder_check_points( builder, 1 );
if ( !error )
t1_builder_add_point( builder, x, y, 1 );
return error;
}
/* check space for a new contour, then add it */
FT_LOCAL_DEF( FT_Error )
t1_builder_add_contour( T1_Builder builder )
{
FT_Outline* outline = builder->current;
FT_Error error;
/* this might happen in invalid fonts */
if ( !outline )
{
FT_ERROR(( "t1_builder_add_contour: no outline to add points to\n" ));
return PSaux_Err_Invalid_File_Format;
}
if ( !builder->load_points )
{
outline->n_contours++;
return PSaux_Err_Ok;
}
error = FT_GLYPHLOADER_CHECK_POINTS( builder->loader, 0, 1 );
if ( !error )
{
if ( outline->n_contours > 0 )
outline->contours[outline->n_contours - 1] =
(short)( outline->n_points - 1 );
outline->n_contours++;
}
return error;
}
/* if a path was begun, add its first on-curve point */
FT_LOCAL_DEF( FT_Error )
t1_builder_start_point( T1_Builder builder,
FT_Pos x,
FT_Pos y )
{
FT_Error error = PSaux_Err_Invalid_File_Format;
/* test whether we are building a new contour */
if ( builder->parse_state == T1_Parse_Have_Path )
error = PSaux_Err_Ok;
else
{
builder->parse_state = T1_Parse_Have_Path;
error = t1_builder_add_contour( builder );
if ( !error )
error = t1_builder_add_point1( builder, x, y );
}
return error;
}
/* close the current contour */
FT_LOCAL_DEF( void )
t1_builder_close_contour( T1_Builder builder )
{
FT_Outline* outline = builder->current;
FT_Int first;
if ( !outline )
return;
first = outline->n_contours <= 1
? 0 : outline->contours[outline->n_contours - 2] + 1;
/* We must not include the last point in the path if it */
/* is located on the first point. */
if ( outline->n_points > 1 )
{
FT_Vector* p1 = outline->points + first;
FT_Vector* p2 = outline->points + outline->n_points - 1;
FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points - 1;
/* `delete' last point only if it coincides with the first */
/* point and it is not a control point (which can happen). */
if ( p1->x == p2->x && p1->y == p2->y )
if ( *control == FT_CURVE_TAG_ON )
outline->n_points--;
}
if ( outline->n_contours > 0 )
{
/* Don't add contours only consisting of one point, i.e., */
/* check whether the first and the last point is the same. */
if ( first == outline->n_points - 1 )
{
outline->n_contours--;
outline->n_points--;
}
else
outline->contours[outline->n_contours - 1] =
(short)( outline->n_points - 1 );
}
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** OTHER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( void )
t1_decrypt( FT_Byte* buffer,
FT_Offset length,
FT_UShort seed )
{
PS_Conv_EexecDecode( &buffer,
buffer + length,
buffer,
length,
&seed );
}
/* END */
/***************************************************************************/
/* */
/* psauxmod.c */
/* */
/* FreeType auxiliary PostScript module implementation (body). */
/* */
/* Copyright 2000-2001, 2002, 2003, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* psauxmod.h */
/* */
/* FreeType auxiliary PostScript module implementation (specification). */
/* */
/* Copyright 2000-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PSAUXMOD_H__
FT_BEGIN_HEADER
FT_EXPORT_VAR( const FT_Module_Class ) psaux_driver_class;
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* t1decode.h */
/* */
/* PostScript Type 1 decoding routines (specification). */
/* */
/* Copyright 2000-2001, 2002, 2003 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1DECODE_H__
FT_BEGIN_HEADER
FT_CALLBACK_TABLE
const T1_Decoder_FuncsRec t1_decoder_funcs;
FT_LOCAL( FT_Error )
t1_decoder_parse_glyph( T1_Decoder decoder,
FT_UInt glyph_index );
FT_LOCAL( FT_Error )
t1_decoder_parse_charstrings( T1_Decoder decoder,
FT_Byte* base,
FT_UInt len );
FT_LOCAL( FT_Error )
t1_decoder_init( T1_Decoder decoder,
FT_Face face,
FT_Size size,
FT_GlyphSlot slot,
FT_Byte** glyph_names,
PS_Blend blend,
FT_Bool hinting,
FT_Render_Mode hint_mode,
T1_Decoder_Callback parse_glyph );
FT_LOCAL( void )
t1_decoder_done( T1_Decoder decoder );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* t1cmap.h */
/* */
/* Type 1 character map support (specification). */
/* */
/* Copyright 2002, 2003, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1CMAP_H__
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE1 STANDARD (AND EXPERT) ENCODING CMAPS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* standard (and expert) encoding cmaps */
typedef struct T1_CMapStdRec_* T1_CMapStd;
typedef struct T1_CMapStdRec_
{
FT_CMapRec cmap;
const FT_UShort* code_to_sid;
PS_Adobe_Std_StringsFunc sid_to_string;
FT_UInt num_glyphs;
const char* const* glyph_names;
} T1_CMapStdRec;
FT_CALLBACK_TABLE const FT_CMap_ClassRec
t1_cmap_standard_class_rec;
FT_CALLBACK_TABLE const FT_CMap_ClassRec
t1_cmap_expert_class_rec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE1 CUSTOM ENCODING CMAP *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct T1_CMapCustomRec_* T1_CMapCustom;
typedef struct T1_CMapCustomRec_
{
FT_CMapRec cmap;
FT_UInt first;
FT_UInt count;
FT_UShort* indices;
} T1_CMapCustomRec;
FT_CALLBACK_TABLE const FT_CMap_ClassRec
t1_cmap_custom_class_rec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE1 SYNTHETIC UNICODE ENCODING CMAP *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* unicode (synthetic) cmaps */
FT_CALLBACK_TABLE const FT_CMap_ClassRec
t1_cmap_unicode_class_rec;
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* afmparse.h */
/* */
/* AFM parser (specification). */
/* */
/* Copyright 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFMPARSE_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
afm_parser_init( AFM_Parser parser,
FT_Memory memory,
FT_Byte* base,
FT_Byte* limit );
FT_LOCAL( void )
afm_parser_done( AFM_Parser parser );
FT_LOCAL( FT_Error )
afm_parser_parse( AFM_Parser parser );
enum AFM_ValueType_
{
AFM_VALUE_TYPE_STRING,
AFM_VALUE_TYPE_NAME,
/* real number */
AFM_VALUE_TYPE_FIXED,
AFM_VALUE_TYPE_INTEGER,
AFM_VALUE_TYPE_BOOL,
/* glyph index */
AFM_VALUE_TYPE_INDEX
};
typedef struct AFM_ValueRec_
{
enum AFM_ValueType_ type;
union
{
char* s;
FT_Fixed f;
FT_Int i;
FT_Bool b;
} u;
} AFM_ValueRec, *AFM_Value;
#define AFM_MAX_ARGUMENTS 5
FT_LOCAL( FT_Int )
afm_parser_read_vals( AFM_Parser parser,
AFM_Value vals,
FT_UInt n );
/* read the next key from the next line or column */
FT_LOCAL( char* )
afm_parser_next_key( AFM_Parser parser,
FT_Bool line,
FT_Offset* len );
FT_END_HEADER
/* END */
FT_CALLBACK_TABLE_DEF
const PS_Table_FuncsRec ps_table_funcs =
{
ps_table_new,
ps_table_done,
ps_table_add,
ps_table_release
};
FT_CALLBACK_TABLE_DEF
const PS_Parser_FuncsRec ps_parser_funcs =
{
ps_parser_init,
ps_parser_done,
ps_parser_skip_spaces,
ps_parser_skip_PS_token,
ps_parser_to_int,
ps_parser_to_fixed,
ps_parser_to_bytes,
ps_parser_to_coord_array,
ps_parser_to_fixed_array,
ps_parser_to_token,
ps_parser_to_token_array,
ps_parser_load_field,
ps_parser_load_field_table
};
FT_CALLBACK_TABLE_DEF
const T1_Builder_FuncsRec t1_builder_funcs =
{
t1_builder_init,
t1_builder_done,
t1_builder_check_points,
t1_builder_add_point,
t1_builder_add_point1,
t1_builder_add_contour,
t1_builder_start_point,
t1_builder_close_contour
};
FT_CALLBACK_TABLE_DEF
const T1_Decoder_FuncsRec t1_decoder_funcs =
{
t1_decoder_init,
t1_decoder_done,
t1_decoder_parse_charstrings
};
FT_CALLBACK_TABLE_DEF
const AFM_Parser_FuncsRec afm_parser_funcs =
{
afm_parser_init,
afm_parser_done,
afm_parser_parse
};
FT_CALLBACK_TABLE_DEF
const T1_CMap_ClassesRec t1_cmap_classes =
{
&t1_cmap_standard_class_rec,
&t1_cmap_expert_class_rec,
&t1_cmap_custom_class_rec,
&t1_cmap_unicode_class_rec
};
static
const PSAux_Interface psaux_interface =
{
&ps_table_funcs,
&ps_parser_funcs,
&t1_builder_funcs,
&t1_decoder_funcs,
t1_decrypt,
(const T1_CMap_ClassesRec*) &t1_cmap_classes,
&afm_parser_funcs,
};
FT_CALLBACK_TABLE_DEF
const FT_Module_Class psaux_module_class =
{
0,
sizeof ( FT_ModuleRec ),
"psaux",
0x20000L,
0x20000L,
/* module-specific interface */
&psaux_interface,
(FT_Module_Constructor)0,
(FT_Module_Destructor) 0,
(FT_Module_Requester) 0
};
/* END */
/***************************************************************************/
/* */
/* t1decode.c */
/* */
/* PostScript Type 1 decoding routines (body). */
/* */
/* Copyright 2000-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* ensure proper sign extension */
#define Fix2Int( f ) ( (FT_Int)(FT_Short)( (f) >> 16 ) )
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t1decode
typedef enum T1_Operator_
{
op_none = 0,
op_endchar,
op_hsbw,
op_seac,
op_sbw,
op_closepath,
op_hlineto,
op_hmoveto,
op_hvcurveto,
op_rlineto,
op_rmoveto,
op_rrcurveto,
op_vhcurveto,
op_vlineto,
op_vmoveto,
op_dotsection,
op_hstem,
op_hstem3,
op_vstem,
op_vstem3,
op_div,
op_callothersubr,
op_callsubr,
op_pop,
op_return,
op_setcurrentpoint,
op_unknown15,
/* never remove this one */
op_max
} T1_Operator;
static
const FT_Int t1_args_count[op_max] =
{
/* none */
0,
/* endchar */
0,
/* hsbw */
2,
/* seac */
5,
/* sbw */
4,
/* closepath */
0,
/* hlineto */
1,
/* hmoveto */
1,
/* hvcurveto */
4,
/* rlineto */
2,
/* rmoveto */
2,
/* rrcurveto */
6,
/* vhcurveto */
4,
/* vlineto */
1,
/* vmoveto */
1,
/* dotsection */
0,
/* hstem */
2,
/* hstem3 */
6,
/* vstem */
2,
/* vstem3 */
6,
/* div */
2,
/* callothersubr */
-1,
/* callsubr */
1,
/* pop */
0,
/* return */
0,
/* setcurrentpoint */
2,
/* opcode 15 (undocumented and obsolete) */
2
};
/*************************************************************************/
/* */
/* <Function> */
/* t1_lookup_glyph_by_stdcharcode */
/* */
/* <Description> */
/* Looks up a given glyph by its StandardEncoding charcode. Used to */
/* implement the SEAC Type 1 operator. */
/* */
/* <Input> */
/* face :: The current face object. */
/* */
/* charcode :: The character code to look for. */
/* */
/* <Return> */
/* A glyph index in the font face. Returns -1 if the corresponding */
/* glyph wasn't found. */
/* */
static FT_Int
t1_lookup_glyph_by_stdcharcode( T1_Decoder decoder,
FT_Int charcode )
{
FT_UInt n;
const FT_String* glyph_name;
FT_Service_PsCMaps psnames = decoder->psnames;
/* check range of standard char code */
if ( charcode < 0 || charcode > 255 )
return -1;
glyph_name = psnames->adobe_std_strings(
psnames->adobe_std_encoding[charcode]);
for ( n = 0; n < decoder->num_glyphs; n++ )
{
FT_String* name = (FT_String*)decoder->glyph_names[n];
if ( name &&
name[0] == glyph_name[0] &&
ft_strcmp( name, glyph_name ) == 0 )
return n;
}
return -1;
}
/*************************************************************************/
/* */
/* <Function> */
/* t1operator_seac */
/* */
/* <Description> */
/* Implements the `seac' Type 1 operator for a Type 1 decoder. */
/* */
/* <Input> */
/* decoder :: The current CID decoder. */
/* */
/* asb :: The accent's side bearing. */
/* */
/* adx :: The horizontal offset of the accent. */
/* */
/* ady :: The vertical offset of the accent. */
/* */
/* bchar :: The base character's StandardEncoding charcode. */
/* */
/* achar :: The accent character's StandardEncoding charcode. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
static FT_Error
t1operator_seac( T1_Decoder decoder,
FT_Pos asb,
FT_Pos adx,
FT_Pos ady,
FT_Int bchar,
FT_Int achar )
{
FT_Error error;
FT_Int bchar_index, achar_index;
#if 0
FT_Int n_base_points;
FT_Outline* base = decoder->builder.base;
#endif
FT_Vector left_bearing, advance;
T1_Face face = (T1_Face)decoder->builder.face;
if ( decoder->seac )
{
FT_ERROR(( "t1operator_seac: invalid nested seac\n" ));
return PSaux_Err_Syntax_Error;
}
if ( decoder->builder.metrics_only )
{
FT_ERROR(( "t1operator_seac: unexpected seac\n" ));
return PSaux_Err_Syntax_Error;
}
/* seac weirdness */
adx += decoder->builder.left_bearing.x;
/* `glyph_names' is set to 0 for CID fonts which do not */
/* include an encoding. How can we deal with these? */
if ( decoder->glyph_names == 0 &&
!face->root.internal->incremental_interface )
{
FT_ERROR(( "t1operator_seac:"
" glyph names table not available in this font\n" ));
return PSaux_Err_Syntax_Error;
}
if ( face->root.internal->incremental_interface )
{
/* the caller must handle the font encoding also */
bchar_index = bchar;
achar_index = achar;
}
else
{
bchar_index = t1_lookup_glyph_by_stdcharcode( decoder, bchar );
achar_index = t1_lookup_glyph_by_stdcharcode( decoder, achar );
}
if ( bchar_index < 0 || achar_index < 0 )
{
FT_ERROR(( "t1operator_seac:"
" invalid seac character code arguments\n" ));
return PSaux_Err_Syntax_Error;
}
/* if we are trying to load a composite glyph, do not load the */
/* accent character and return the array of subglyphs. */
if ( decoder->builder.no_recurse )
{
FT_GlyphSlot glyph = (FT_GlyphSlot)decoder->builder.glyph;
FT_GlyphLoader loader = glyph->internal->loader;
FT_SubGlyph subg;
/* reallocate subglyph array if necessary */
error = FT_GlyphLoader_CheckSubGlyphs( loader, 2 );
if ( error )
goto Exit;
subg = loader->current.subglyphs;
/* subglyph 0 = base character */
subg->index = bchar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES |
FT_SUBGLYPH_FLAG_USE_MY_METRICS;
subg->arg1 = 0;
subg->arg2 = 0;
subg++;
/* subglyph 1 = accent character */
subg->index = achar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES;
subg->arg1 = (FT_Int)FIXED_TO_INT( adx - asb );
subg->arg2 = (FT_Int)FIXED_TO_INT( ady );
/* set up remaining glyph fields */
glyph->num_subglyphs = 2;
glyph->subglyphs = loader->base.subglyphs;
glyph->format = FT_GLYPH_FORMAT_COMPOSITE;
loader->current.num_subglyphs = 2;
goto Exit;
}
/* First load `bchar' in builder */
/* now load the unscaled outline */
/* prepare loader */
FT_GlyphLoader_Prepare( decoder->builder.loader );
/* the seac operator must not be nested */
decoder->seac = TRUE;
error = t1_decoder_parse_glyph( decoder, bchar_index );
decoder->seac = FALSE;
if ( error )
goto Exit;
/* save the left bearing and width of the base character */
/* as they will be erased by the next load. */
left_bearing = decoder->builder.left_bearing;
advance = decoder->builder.advance;
decoder->builder.left_bearing.x = 0;
decoder->builder.left_bearing.y = 0;
decoder->builder.pos_x = adx - asb;
decoder->builder.pos_y = ady;
/* Now load `achar' on top of */
/* the base outline */
/* the seac operator must not be nested */
decoder->seac = TRUE;
error = t1_decoder_parse_glyph( decoder, achar_index );
decoder->seac = FALSE;
if ( error )
goto Exit;
/* restore the left side bearing and */
/* advance width of the base character */
decoder->builder.left_bearing = left_bearing;
decoder->builder.advance = advance;
decoder->builder.pos_x = 0;
decoder->builder.pos_y = 0;
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* t1_decoder_parse_charstrings */
/* */
/* <Description> */
/* Parses a given Type 1 charstrings program. */
/* */
/* <Input> */
/* decoder :: The current Type 1 decoder. */
/* */
/* charstring_base :: The base address of the charstring stream. */
/* */
/* charstring_len :: The length in bytes of the charstring stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
t1_decoder_parse_charstrings( T1_Decoder decoder,
FT_Byte* charstring_base,
FT_UInt charstring_len )
{
FT_Error error;
T1_Decoder_Zone zone;
FT_Byte* ip;
FT_Byte* limit;
T1_Builder builder = &decoder->builder;
FT_Pos x, y, orig_x, orig_y;
FT_Int known_othersubr_result_cnt = 0;
FT_Int unknown_othersubr_result_cnt = 0;
FT_Bool large_int;
FT_Fixed seed;
T1_Hints_Funcs hinter;
/* compute random seed from stack address of parameter */
seed = (FT_Fixed)( ( (FT_PtrDist)(char*)&seed ^
(FT_PtrDist)(char*)&decoder ^
(FT_PtrDist)(char*)&charstring_base ) &
FT_ULONG_MAX ) ;
seed = ( seed ^ ( seed >> 10 ) ^ ( seed >> 20 ) ) & 0xFFFFL;
if ( seed == 0 )
seed = 0x7384;
/* First of all, initialize the decoder */
decoder->top = decoder->stack;
decoder->zone = decoder->zones;
zone = decoder->zones;
builder->parse_state = T1_Parse_Start;
hinter = (T1_Hints_Funcs)builder->hints_funcs;
/* a font that reads BuildCharArray without setting */
/* its values first is buggy, but ... */
FT_ASSERT( ( decoder->len_buildchar == 0 ) ==
( decoder->buildchar == NULL ) );
if ( decoder->buildchar && decoder->len_buildchar > 0 )
ft_memset( &decoder->buildchar[0],
0,
sizeof ( decoder->buildchar[0] ) * decoder->len_buildchar );
FT_TRACE4(( "\n"
"Start charstring\n" ));
zone->base = charstring_base;
limit = zone->limit = charstring_base + charstring_len;
ip = zone->cursor = zone->base;
error = PSaux_Err_Ok;
x = orig_x = builder->pos_x;
y = orig_y = builder->pos_y;
/* begin hints recording session, if any */
if ( hinter )
hinter->open( hinter->hints );
large_int = FALSE;
/* now, execute loop */
while ( ip < limit )
{
FT_Long* top = decoder->top;
T1_Operator op = op_none;
FT_Int32 value = 0;
FT_ASSERT( known_othersubr_result_cnt == 0 ||
unknown_othersubr_result_cnt == 0 );
/*********************************************************************/
/* */
/* Decode operator or operand */
/* */
/* */
/* first of all, decompress operator or value */
switch ( *ip++ )
{
case 1:
op = op_hstem;
break;
case 3:
op = op_vstem;
break;
case 4:
op = op_vmoveto;
break;
case 5:
op = op_rlineto;
break;
case 6:
op = op_hlineto;
break;
case 7:
op = op_vlineto;
break;
case 8:
op = op_rrcurveto;
break;
case 9:
op = op_closepath;
break;
case 10:
op = op_callsubr;
break;
case 11:
op = op_return;
break;
case 13:
op = op_hsbw;
break;
case 14:
op = op_endchar;
break;
/* undocumented, obsolete operator */
case 15:
op = op_unknown15;
break;
case 21:
op = op_rmoveto;
break;
case 22:
op = op_hmoveto;
break;
case 30:
op = op_vhcurveto;
break;
case 31:
op = op_hvcurveto;
break;
case 12:
if ( ip > limit )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" invalid escape (12+EOF)\n" ));
goto Syntax_Error;
}
switch ( *ip++ )
{
case 0:
op = op_dotsection;
break;
case 1:
op = op_vstem3;
break;
case 2:
op = op_hstem3;
break;
case 6:
op = op_seac;
break;
case 7:
op = op_sbw;
break;
case 12:
op = op_div;
break;
case 16:
op = op_callothersubr;
break;
case 17:
op = op_pop;
break;
case 33:
op = op_setcurrentpoint;
break;
default:
FT_ERROR(( "t1_decoder_parse_charstrings:"
" invalid escape (12+%d)\n",
ip[-1] ));
goto Syntax_Error;
}
break;
/* four bytes integer */
case 255:
if ( ip + 4 > limit )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" unexpected EOF in integer\n" ));
goto Syntax_Error;
}
value = (FT_Int32)( ( (FT_Long)ip[0] << 24 ) |
( (FT_Long)ip[1] << 16 ) |
( (FT_Long)ip[2] << 8 ) |
ip[3] );
ip += 4;
/* According to the specification, values > 32000 or < -32000 must */
/* be followed by a `div' operator to make the result be in the */
/* range [-32000;32000]. We expect that the second argument of */
/* `div' is not a large number. Additionally, we don't handle */
/* stuff like `<large1> <large2> <num> div <num> div' or */
/* <large1> <large2> <num> div div'. This is probably not allowed */
/* anyway. */
if ( value > 32000 || value < -32000 )
{
if ( large_int )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" no `div' after large integer\n" ));
}
else
large_int = TRUE;
}
else
{
if ( !large_int )
value <<= 16;
}
break;
default:
if ( ip[-1] >= 32 )
{
if ( ip[-1] < 247 )
value = (FT_Int32)ip[-1] - 139;
else
{
if ( ++ip > limit )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" unexpected EOF in integer\n" ));
goto Syntax_Error;
}
if ( ip[-2] < 251 )
value = ( ( (FT_Int32)ip[-2] - 247 ) << 8 ) + ip[-1] + 108;
else
value = -( ( ( (FT_Int32)ip[-2] - 251 ) << 8 ) + ip[-1] + 108 );
}
if ( !large_int )
value <<= 16;
}
else
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" invalid byte (%d)\n", ip[-1] ));
goto Syntax_Error;
}
}
if ( unknown_othersubr_result_cnt > 0 )
{
switch ( op )
{
case op_callsubr:
case op_return:
case op_none:
case op_pop:
break;
default:
/* all operands have been transferred by previous pops */
unknown_othersubr_result_cnt = 0;
break;
}
}
if ( large_int && !( op == op_none || op == op_div ) )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" no `div' after large integer\n" ));
large_int = FALSE;
}
/*********************************************************************/
/* */
/* Push value on stack, or process operator */
/* */
/* */
if ( op == op_none )
{
if ( top - decoder->stack >= T1_MAX_CHARSTRINGS_OPERANDS )
{
FT_ERROR(( "t1_decoder_parse_charstrings: stack overflow\n" ));
goto Syntax_Error;
}
*top++ = value;
decoder->top = top;
}
/* callothersubr */
else if ( op == op_callothersubr )
{
FT_Int subr_no;
FT_Int arg_cnt;
if ( top - decoder->stack < 2 )
goto Stack_Underflow;
top -= 2;
subr_no = Fix2Int( top[1] );
arg_cnt = Fix2Int( top[0] );
/***********************************************************/
/* */
/* remove all operands to callothersubr from the stack */
/* */
/* for handled othersubrs, where we know the number of */
/* arguments, we increase the stack by the value of */
/* known_othersubr_result_cnt */
/* */
/* for unhandled othersubrs the following pops adjust the */
/* stack pointer as necessary */
if ( arg_cnt > top - decoder->stack )
goto Stack_Underflow;
top -= arg_cnt;
known_othersubr_result_cnt = 0;
unknown_othersubr_result_cnt = 0;
/* XXX TODO: The checks to `arg_count == <whatever>' */
/* might not be correct; an othersubr expects a certain */
/* number of operands on the PostScript stack (as opposed */
/* to the T1 stack) but it doesn't have to put them there */
/* by itself; previous othersubrs might have left the */
/* operands there if they were not followed by an */
/* appropriate number of pops */
/* */
/* On the other hand, Adobe Reader 7.0.8 for Linux doesn't */
/* accept a font that contains charstrings like */
/* */
/* 100 200 2 20 callothersubr */
/* 300 1 20 callothersubr pop */
/* */
/* Perhaps this is the reason why BuildCharArray exists. */
switch ( subr_no )
{
/* end flex feature */
case 0:
if ( arg_cnt != 3 )
goto Unexpected_OtherSubr;
if ( decoder->flex_state == 0 ||
decoder->num_flex_vectors != 7 )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" unexpected flex end\n" ));
goto Syntax_Error;
}
/* the two `results' are popped by the following setcurrentpoint */
top[0] = x;
top[1] = y;
known_othersubr_result_cnt = 2;
break;
/* start flex feature */
case 1:
if ( arg_cnt != 0 )
goto Unexpected_OtherSubr;
decoder->flex_state = 1;
decoder->num_flex_vectors = 0;
if ( ( error = t1_builder_start_point( builder, x, y ) )
!= PSaux_Err_Ok ||
( error = t1_builder_check_points( builder, 6 ) )
!= PSaux_Err_Ok )
goto Fail;
break;
/* add flex vectors */
case 2:
{
FT_Int idx;
if ( arg_cnt != 0 )
goto Unexpected_OtherSubr;
if ( decoder->flex_state == 0 )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" missing flex start\n" ));
goto Syntax_Error;
}
/* note that we should not add a point for index 0; */
/* this will move our current position to the flex */
/* point without adding any point to the outline */
idx = decoder->num_flex_vectors++;
if ( idx > 0 && idx < 7 )
t1_builder_add_point( builder,
x,
y,
(FT_Byte)( idx == 3 || idx == 6 ) );
}
break;
/* change hints */
case 3:
if ( arg_cnt != 1 )
goto Unexpected_OtherSubr;
known_othersubr_result_cnt = 1;
if ( hinter )
hinter->reset( hinter->hints, builder->current->n_points );
break;
case 12:
case 13:
/* counter control hints, clear stack */
top = decoder->stack;
break;
case 14:
case 15:
case 16:
case 17:
/* multiple masters */
case 18:
{
PS_Blend blend = decoder->blend;
FT_UInt num_points, nn, mm;
FT_Long* delta;
FT_Long* values;
if ( !blend )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" unexpected multiple masters operator\n" ));
goto Syntax_Error;
}
num_points = (FT_UInt)subr_no - 13 + ( subr_no == 18 );
if ( arg_cnt != (FT_Int)( num_points * blend->num_designs ) )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" incorrect number of multiple masters arguments\n" ));
goto Syntax_Error;
}
/* We want to compute */
/* */
/* a0*w0 + a1*w1 + ... + ak*wk */
/* */
/* but we only have a0, a1-a0, a2-a0, ..., ak-a0. */
/* */
/* However, given that w0 + w1 + ... + wk == 1, we can */
/* rewrite it easily as */
/* */
/* a0 + (a1-a0)*w1 + (a2-a0)*w2 + ... + (ak-a0)*wk */
/* */
/* where k == num_designs-1. */
/* */
/* I guess that's why it's written in this `compact' */
/* form. */
/* */
delta = top + num_points;
values = top;
for ( nn = 0; nn < num_points; nn++ )
{
FT_Long tmp = values[0];
for ( mm = 1; mm < blend->num_designs; mm++ )
tmp += FT_MulFix( *delta++, blend->weight_vector[mm] );
*values++ = tmp;
}
known_othersubr_result_cnt = num_points;
break;
}
case 19:
/* <idx> 1 19 callothersubr */
/* => replace elements starting from index cvi( <idx> ) */
/* of BuildCharArray with WeightVector */
{
FT_Int idx;
PS_Blend blend = decoder->blend;
if ( arg_cnt != 1 || blend == NULL )
goto Unexpected_OtherSubr;
idx = Fix2Int( top[0] );
if ( idx < 0 ||
idx + blend->num_designs > decoder->len_buildchar )
goto Unexpected_OtherSubr;
ft_memcpy( &decoder->buildchar[idx],
blend->weight_vector,
blend->num_designs *
sizeof ( blend->weight_vector[0] ) );
}
break;
case 20:
/* <arg1> <arg2> 2 20 callothersubr pop */
/* ==> push <arg1> + <arg2> onto T1 stack */
if ( arg_cnt != 2 )
goto Unexpected_OtherSubr;
/* XXX (over|under)flow */
top[0] += top[1];
known_othersubr_result_cnt = 1;
break;
case 21:
/* <arg1> <arg2> 2 21 callothersubr pop */
/* ==> push <arg1> - <arg2> onto T1 stack */
if ( arg_cnt != 2 )
goto Unexpected_OtherSubr;
/* XXX (over|under)flow */
top[0] -= top[1];
known_othersubr_result_cnt = 1;
break;
case 22:
/* <arg1> <arg2> 2 22 callothersubr pop */
/* ==> push <arg1> * <arg2> onto T1 stack */
if ( arg_cnt != 2 )
goto Unexpected_OtherSubr;
top[0] = FT_MulFix( top[0], top[1] );
known_othersubr_result_cnt = 1;
break;
case 23:
/* <arg1> <arg2> 2 23 callothersubr pop */
/* ==> push <arg1> / <arg2> onto T1 stack */
if ( arg_cnt != 2 || top[1] == 0 )
goto Unexpected_OtherSubr;
top[0] = FT_DivFix( top[0], top[1] );
known_othersubr_result_cnt = 1;
break;
case 24:
/* <val> <idx> 2 24 callothersubr */
/* ==> set BuildCharArray[cvi( <idx> )] = <val> */
{
FT_Int idx;
PS_Blend blend = decoder->blend;
if ( arg_cnt != 2 || blend == NULL )
goto Unexpected_OtherSubr;
idx = Fix2Int( top[1] );
if ( idx < 0 || (FT_UInt) idx >= decoder->len_buildchar )
goto Unexpected_OtherSubr;
decoder->buildchar[idx] = top[0];
}
break;
case 25:
/* <idx> 1 25 callothersubr pop */
/* ==> push BuildCharArray[cvi( idx )] */
/* onto T1 stack */
{
FT_Int idx;
PS_Blend blend = decoder->blend;
if ( arg_cnt != 1 || blend == NULL )
goto Unexpected_OtherSubr;
idx = Fix2Int( top[0] );
if ( idx < 0 || (FT_UInt) idx >= decoder->len_buildchar )
goto Unexpected_OtherSubr;
top[0] = decoder->buildchar[idx];
}
known_othersubr_result_cnt = 1;
break;
#if 0
case 26:
/* <val> mark <idx> ==> set BuildCharArray[cvi( <idx> )] = <val>, */
/* leave mark on T1 stack */
/* <val> <idx> ==> set BuildCharArray[cvi( <idx> )] = <val> */
XXX which routine has left its mark on the (PostScript) stack?;
break;
#endif
case 27:
/* <res1> <res2> <val1> <val2> 4 27 callothersubr pop */
/* ==> push <res1> onto T1 stack if <val1> <= <val2>, */
/* otherwise push <res2> */
if ( arg_cnt != 4 )
goto Unexpected_OtherSubr;
if ( top[2] > top[3] )
top[0] = top[1];
known_othersubr_result_cnt = 1;
break;
case 28:
/* 0 28 callothersubr pop */
/* => push random value from interval [0, 1) onto stack */
if ( arg_cnt != 0 )
goto Unexpected_OtherSubr;
{
FT_Fixed Rand;
Rand = seed;
if ( Rand >= 0x8000L )
Rand++;
top[0] = Rand;
seed = FT_MulFix( seed, 0x10000L - seed );
if ( seed == 0 )
seed += 0x2873;
}
known_othersubr_result_cnt = 1;
break;
default:
if ( arg_cnt >= 0 && subr_no >= 0 )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" unknown othersubr [%d %d], wish me luck\n",
arg_cnt, subr_no ));
unknown_othersubr_result_cnt = arg_cnt;
break;
}
/* fall through */
Unexpected_OtherSubr:
FT_ERROR(( "t1_decoder_parse_charstrings:"
" invalid othersubr [%d %d]\n", arg_cnt, subr_no ));
goto Syntax_Error;
}
top += known_othersubr_result_cnt;
decoder->top = top;
}
/* general operator */
else
{
FT_Int num_args = t1_args_count[op];
FT_ASSERT( num_args >= 0 );
if ( top - decoder->stack < num_args )
goto Stack_Underflow;
/* XXX Operators usually take their operands from the */
/* bottom of the stack, i.e., the operands are */
/* decoder->stack[0], ..., decoder->stack[num_args - 1]; */
/* only div, callsubr, and callothersubr are different. */
/* In practice it doesn't matter (?). */
top -= num_args;
switch ( op )
{
case op_endchar:
FT_TRACE4(( " endchar\n" ));
t1_builder_close_contour( builder );
/* close hints recording session */
if ( hinter )
{
if ( hinter->close( hinter->hints, builder->current->n_points ) )
goto Syntax_Error;
/* apply hints to the loaded glyph outline now */
hinter->apply( hinter->hints,
builder->current,
(PSH_Globals)builder->hints_globals,
decoder->hint_mode );
}
/* add current outline to the glyph slot */
FT_GlyphLoader_Add( builder->loader );
/* the compiler should optimize away this empty loop but ... */
FT_TRACE4(( "\n" ));
/* return now! */
return PSaux_Err_Ok;
case op_hsbw:
FT_TRACE4(( " hsbw" ));
builder->parse_state = T1_Parse_Have_Width;
builder->left_bearing.x += top[0];
builder->advance.x = top[1];
builder->advance.y = 0;
orig_x = x = builder->pos_x + top[0];
orig_y = y = builder->pos_y;
FT_UNUSED( orig_y );
/* the `metrics_only' indicates that we only want to compute */
/* the glyph's metrics (lsb + advance width), not load the */
/* rest of it; so exit immediately */
if ( builder->metrics_only )
return PSaux_Err_Ok;
break;
case op_seac:
return t1operator_seac( decoder,
top[0],
top[1],
top[2],
Fix2Int( top[3] ),
Fix2Int( top[4] ) );
case op_sbw:
FT_TRACE4(( " sbw" ));
builder->parse_state = T1_Parse_Have_Width;
builder->left_bearing.x += top[0];
builder->left_bearing.y += top[1];
builder->advance.x = top[2];
builder->advance.y = top[3];
x = builder->pos_x + top[0];
y = builder->pos_y + top[1];
/* the `metrics_only' indicates that we only want to compute */
/* the glyph's metrics (lsb + advance width), not load the */
/* rest of it; so exit immediately */
if ( builder->metrics_only )
return PSaux_Err_Ok;
break;
case op_closepath:
FT_TRACE4(( " closepath" ));
/* if there is no path, `closepath' is a no-op */
if ( builder->parse_state == T1_Parse_Have_Path ||
builder->parse_state == T1_Parse_Have_Moveto )
t1_builder_close_contour( builder );
builder->parse_state = T1_Parse_Have_Width;
break;
case op_hlineto:
FT_TRACE4(( " hlineto" ));
if ( ( error = t1_builder_start_point( builder, x, y ) )
!= PSaux_Err_Ok )
goto Fail;
x += top[0];
goto Add_Line;
case op_hmoveto:
FT_TRACE4(( " hmoveto" ));
x += top[0];
if ( !decoder->flex_state )
{
if ( builder->parse_state == T1_Parse_Start )
goto Syntax_Error;
builder->parse_state = T1_Parse_Have_Moveto;
}
break;
case op_hvcurveto:
FT_TRACE4(( " hvcurveto" ));
if ( ( error = t1_builder_start_point( builder, x, y ) )
!= PSaux_Err_Ok ||
( error = t1_builder_check_points( builder, 3 ) )
!= PSaux_Err_Ok )
goto Fail;
x += top[0];
t1_builder_add_point( builder, x, y, 0 );
x += top[1];
y += top[2];
t1_builder_add_point( builder, x, y, 0 );
y += top[3];
t1_builder_add_point( builder, x, y, 1 );
break;
case op_rlineto:
FT_TRACE4(( " rlineto" ));
if ( ( error = t1_builder_start_point( builder, x, y ) )
!= PSaux_Err_Ok )
goto Fail;
x += top[0];
y += top[1];
Add_Line:
if ( ( error = t1_builder_add_point1( builder, x, y ) )
!= PSaux_Err_Ok )
goto Fail;
break;
case op_rmoveto:
FT_TRACE4(( " rmoveto" ));
x += top[0];
y += top[1];
if ( !decoder->flex_state )
{
if ( builder->parse_state == T1_Parse_Start )
goto Syntax_Error;
builder->parse_state = T1_Parse_Have_Moveto;
}
break;
case op_rrcurveto:
FT_TRACE4(( " rrcurveto" ));
if ( ( error = t1_builder_start_point( builder, x, y ) )
!= PSaux_Err_Ok ||
( error = t1_builder_check_points( builder, 3 ) )
!= PSaux_Err_Ok )
goto Fail;
x += top[0];
y += top[1];
t1_builder_add_point( builder, x, y, 0 );
x += top[2];
y += top[3];
t1_builder_add_point( builder, x, y, 0 );
x += top[4];
y += top[5];
t1_builder_add_point( builder, x, y, 1 );
break;
case op_vhcurveto:
FT_TRACE4(( " vhcurveto" ));
if ( ( error = t1_builder_start_point( builder, x, y ) )
!= PSaux_Err_Ok ||
( error = t1_builder_check_points( builder, 3 ) )
!= PSaux_Err_Ok )
goto Fail;
y += top[0];
t1_builder_add_point( builder, x, y, 0 );
x += top[1];
y += top[2];
t1_builder_add_point( builder, x, y, 0 );
x += top[3];
t1_builder_add_point( builder, x, y, 1 );
break;
case op_vlineto:
FT_TRACE4(( " vlineto" ));
if ( ( error = t1_builder_start_point( builder, x, y ) )
!= PSaux_Err_Ok )
goto Fail;
y += top[0];
goto Add_Line;
case op_vmoveto:
FT_TRACE4(( " vmoveto" ));
y += top[0];
if ( !decoder->flex_state )
{
if ( builder->parse_state == T1_Parse_Start )
goto Syntax_Error;
builder->parse_state = T1_Parse_Have_Moveto;
}
break;
case op_div:
FT_TRACE4(( " div" ));
/* if `large_int' is set, we divide unscaled numbers; */
/* otherwise, we divide numbers in 16.16 format -- */
/* in both cases, it is the same operation */
*top = FT_DivFix( top[0], top[1] );
++top;
large_int = FALSE;
break;
case op_callsubr:
{
FT_Int idx;
FT_TRACE4(( " callsubr" ));
idx = Fix2Int( top[0] );
if ( idx < 0 || idx >= (FT_Int)decoder->num_subrs )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" invalid subrs index\n" ));
goto Syntax_Error;
}
if ( zone - decoder->zones >= T1_MAX_SUBRS_CALLS )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" too many nested subrs\n" ));
goto Syntax_Error;
}
/* save current instruction pointer */
zone->cursor = ip;
zone++;
/* The Type 1 driver stores subroutines without the seed bytes. */
/* The CID driver stores subroutines with seed bytes. This */
/* case is taken care of when decoder->subrs_len == 0. */
zone->base = decoder->subrs[idx];
if ( decoder->subrs_len )
zone->limit = zone->base + decoder->subrs_len[idx];
else
{
/* We are using subroutines from a CID font. We must adjust */
/* for the seed bytes. */
zone->base += ( decoder->lenIV >= 0 ? decoder->lenIV : 0 );
zone->limit = decoder->subrs[idx + 1];
}
zone->cursor = zone->base;
if ( !zone->base )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" invoking empty subrs\n" ));
goto Syntax_Error;
}
decoder->zone = zone;
ip = zone->base;
limit = zone->limit;
break;
}
case op_pop:
FT_TRACE4(( " pop" ));
if ( known_othersubr_result_cnt > 0 )
{
known_othersubr_result_cnt--;
/* ignore, we pushed the operands ourselves */
break;
}
if ( unknown_othersubr_result_cnt == 0 )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" no more operands for othersubr\n" ));
goto Syntax_Error;
}
unknown_othersubr_result_cnt--;
/* `push' the operand to callothersubr onto the stack */
top++;
break;
case op_return:
FT_TRACE4(( " return" ));
if ( zone <= decoder->zones )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" unexpected return\n" ));
goto Syntax_Error;
}
zone--;
ip = zone->cursor;
limit = zone->limit;
decoder->zone = zone;
break;
case op_dotsection:
FT_TRACE4(( " dotsection" ));
break;
case op_hstem:
FT_TRACE4(( " hstem" ));
/* record horizontal hint */
if ( hinter )
{
/* top[0] += builder->left_bearing.y; */
hinter->stem( hinter->hints, 1, top );
}
break;
case op_hstem3:
FT_TRACE4(( " hstem3" ));
/* record horizontal counter-controlled hints */
if ( hinter )
hinter->stem3( hinter->hints, 1, top );
break;
case op_vstem:
FT_TRACE4(( " vstem" ));
/* record vertical hint */
if ( hinter )
{
top[0] += orig_x;
hinter->stem( hinter->hints, 0, top );
}
break;
case op_vstem3:
FT_TRACE4(( " vstem3" ));
/* record vertical counter-controlled hints */
if ( hinter )
{
FT_Pos dx = orig_x;
top[0] += dx;
top[2] += dx;
top[4] += dx;
hinter->stem3( hinter->hints, 0, top );
}
break;
case op_setcurrentpoint:
FT_TRACE4(( " setcurrentpoint" ));
/* From the T1 specification, section 6.4: */
/* */
/* The setcurrentpoint command is used only in */
/* conjunction with results from OtherSubrs procedures. */
/* known_othersubr_result_cnt != 0 is already handled */
/* above. */
/* Note, however, that both Ghostscript and Adobe */
/* Distiller handle this situation by silently ignoring */
/* the inappropriate `setcurrentpoint' instruction. So */
/* we do the same. */
#if 0
if ( decoder->flex_state != 1 )
{
FT_ERROR(( "t1_decoder_parse_charstrings:"
" unexpected `setcurrentpoint'\n" ));
goto Syntax_Error;
}
else
...
#endif
x = top[0];
y = top[1];
decoder->flex_state = 0;
break;
case op_unknown15:
FT_TRACE4(( " opcode_15" ));
/* nothing to do except to pop the two arguments */
break;
default:
FT_ERROR(( "t1_decoder_parse_charstrings:"
" unhandled opcode %d\n", op ));
goto Syntax_Error;
}
/* XXX Operators usually clear the operand stack; */
/* only div, callsubr, callothersubr, pop, and */
/* return are different. */
/* In practice it doesn't matter (?). */
decoder->top = top;
/* general operator processing */
}
/* while ip < limit */
}
FT_TRACE4(( "..end..\n\n" ));
Fail:
return error;
Syntax_Error:
return PSaux_Err_Syntax_Error;
Stack_Underflow:
return PSaux_Err_Stack_Underflow;
}
/* parse a single Type 1 glyph */
FT_LOCAL_DEF( FT_Error )
t1_decoder_parse_glyph( T1_Decoder decoder,
FT_UInt glyph )
{
return decoder->parse_callback( decoder, glyph );
}
/* initialize T1 decoder */
FT_LOCAL_DEF( FT_Error )
t1_decoder_init( T1_Decoder decoder,
FT_Face face,
FT_Size size,
FT_GlyphSlot slot,
FT_Byte** glyph_names,
PS_Blend blend,
FT_Bool hinting,
FT_Render_Mode hint_mode,
T1_Decoder_Callback parse_callback )
{
FT_MEM_ZERO( decoder, sizeof ( *decoder ) );
/* retrieve PSNames interface from list of current modules */
{
FT_Service_PsCMaps psnames = 0;
FT_FACE_FIND_GLOBAL_SERVICE( face, psnames, POSTSCRIPT_CMAPS );
if ( !psnames )
{
FT_ERROR(( "t1_decoder_init:"
" the `psnames' module is not available\n" ));
return PSaux_Err_Unimplemented_Feature;
}
decoder->psnames = psnames;
}
t1_builder_init( &decoder->builder, face, size, slot, hinting );
/* decoder->buildchar and decoder->len_buildchar have to be */
/* initialized by the caller since we cannot know the length */
/* of the BuildCharArray */
decoder->num_glyphs = (FT_UInt)face->num_glyphs;
decoder->glyph_names = glyph_names;
decoder->hint_mode = hint_mode;
decoder->blend = blend;
decoder->parse_callback = parse_callback;
decoder->funcs = t1_decoder_funcs;
return PSaux_Err_Ok;
}
/* finalize T1 decoder */
FT_LOCAL_DEF( void )
t1_decoder_done( T1_Decoder decoder )
{
t1_builder_done( &decoder->builder );
}
/* END */
/***************************************************************************/
/* */
/* t1cmap.c */
/* */
/* Type 1 character map support (body). */
/* */
/* Copyright 2002, 2003, 2006, 2007, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE1 STANDARD (AND EXPERT) ENCODING CMAPS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static void
t1_cmap_std_init( T1_CMapStd cmap,
FT_Int is_expert )
{
T1_Face face = (T1_Face)FT_CMAP_FACE( cmap );
FT_Service_PsCMaps psnames = (FT_Service_PsCMaps)face->psnames;
cmap->num_glyphs = face->type1.num_glyphs;
cmap->glyph_names = (const char* const*)face->type1.glyph_names;
cmap->sid_to_string = psnames->adobe_std_strings;
cmap->code_to_sid = is_expert ? psnames->adobe_expert_encoding
: psnames->adobe_std_encoding;
FT_ASSERT( cmap->code_to_sid != NULL );
}
FT_CALLBACK_DEF( void )
t1_cmap_std_done( T1_CMapStd cmap )
{
cmap->num_glyphs = 0;
cmap->glyph_names = NULL;
cmap->sid_to_string = NULL;
cmap->code_to_sid = NULL;
}
FT_CALLBACK_DEF( FT_UInt )
t1_cmap_std_char_index( T1_CMapStd cmap,
FT_UInt32 char_code )
{
FT_UInt result = 0;
if ( char_code < 256 )
{
FT_UInt code, n;
const char* glyph_name;
/* convert character code to Adobe SID string */
code = cmap->code_to_sid[char_code];
glyph_name = cmap->sid_to_string( code );
/* look for the corresponding glyph name */
for ( n = 0; n < cmap->num_glyphs; n++ )
{
const char* gname = cmap->glyph_names[n];
if ( gname && gname[0] == glyph_name[0] &&
ft_strcmp( gname, glyph_name ) == 0 )
{
result = n;
break;
}
}
}
return result;
}
FT_CALLBACK_DEF( FT_UInt32 )
t1_cmap_std_char_next( T1_CMapStd cmap,
FT_UInt32 *pchar_code )
{
FT_UInt result = 0;
FT_UInt32 char_code = *pchar_code + 1;
while ( char_code < 256 )
{
result = t1_cmap_std_char_index( cmap, char_code );
if ( result != 0 )
goto Exit;
char_code++;
}
char_code = 0;
Exit:
*pchar_code = char_code;
return result;
}
FT_CALLBACK_DEF( FT_Error )
t1_cmap_standard_init( T1_CMapStd cmap )
{
t1_cmap_std_init( cmap, 0 );
return 0;
}
FT_CALLBACK_TABLE_DEF const FT_CMap_ClassRec
t1_cmap_standard_class_rec =
{
sizeof ( T1_CMapStdRec ),
(FT_CMap_InitFunc) t1_cmap_standard_init,
(FT_CMap_DoneFunc) t1_cmap_std_done,
(FT_CMap_CharIndexFunc)t1_cmap_std_char_index,
(FT_CMap_CharNextFunc) t1_cmap_std_char_next,
NULL, NULL, NULL, NULL, NULL
};
FT_CALLBACK_DEF( FT_Error )
t1_cmap_expert_init( T1_CMapStd cmap )
{
t1_cmap_std_init( cmap, 1 );
return 0;
}
FT_CALLBACK_TABLE_DEF const FT_CMap_ClassRec
t1_cmap_expert_class_rec =
{
sizeof ( T1_CMapStdRec ),
(FT_CMap_InitFunc) t1_cmap_expert_init,
(FT_CMap_DoneFunc) t1_cmap_std_done,
(FT_CMap_CharIndexFunc)t1_cmap_std_char_index,
(FT_CMap_CharNextFunc) t1_cmap_std_char_next,
NULL, NULL, NULL, NULL, NULL
};
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE1 CUSTOM ENCODING CMAP *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_CALLBACK_DEF( FT_Error )
t1_cmap_custom_init( T1_CMapCustom cmap )
{
T1_Face face = (T1_Face)FT_CMAP_FACE( cmap );
T1_Encoding encoding = &face->type1.encoding;
cmap->first = encoding->code_first;
cmap->count = (FT_UInt)( encoding->code_last - cmap->first );
cmap->indices = encoding->char_index;
FT_ASSERT( cmap->indices != NULL );
FT_ASSERT( encoding->code_first <= encoding->code_last );
return 0;
}
FT_CALLBACK_DEF( void )
t1_cmap_custom_done( T1_CMapCustom cmap )
{
cmap->indices = NULL;
cmap->first = 0;
cmap->count = 0;
}
FT_CALLBACK_DEF( FT_UInt )
t1_cmap_custom_char_index( T1_CMapCustom cmap,
FT_UInt32 char_code )
{
FT_UInt result = 0;
if ( ( char_code >= cmap->first ) &&
( char_code < ( cmap->first + cmap->count ) ) )
result = cmap->indices[char_code];
return result;
}
FT_CALLBACK_DEF( FT_UInt32 )
t1_cmap_custom_char_next( T1_CMapCustom cmap,
FT_UInt32 *pchar_code )
{
FT_UInt result = 0;
FT_UInt32 char_code = *pchar_code;
++char_code;
if ( char_code < cmap->first )
char_code = cmap->first;
for ( ; char_code < ( cmap->first + cmap->count ); char_code++ )
{
result = cmap->indices[char_code];
if ( result != 0 )
goto Exit;
}
char_code = 0;
Exit:
*pchar_code = char_code;
return result;
}
FT_CALLBACK_TABLE_DEF const FT_CMap_ClassRec
t1_cmap_custom_class_rec =
{
sizeof ( T1_CMapCustomRec ),
(FT_CMap_InitFunc) t1_cmap_custom_init,
(FT_CMap_DoneFunc) t1_cmap_custom_done,
(FT_CMap_CharIndexFunc)t1_cmap_custom_char_index,
(FT_CMap_CharNextFunc) t1_cmap_custom_char_next,
NULL, NULL, NULL, NULL, NULL
};
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE1 SYNTHETIC UNICODE ENCODING CMAP *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_CALLBACK_DEF( const char * )
psaux_get_glyph_name( T1_Face face,
FT_UInt idx )
{
return face->type1.glyph_names[idx];
}
FT_CALLBACK_DEF( FT_Error )
t1_cmap_unicode_init( PS_Unicodes unicodes )
{
T1_Face face = (T1_Face)FT_CMAP_FACE( unicodes );
FT_Memory memory = FT_FACE_MEMORY( face );
FT_Service_PsCMaps psnames = (FT_Service_PsCMaps)face->psnames;
return psnames->unicodes_init( memory,
unicodes,
face->type1.num_glyphs,
(PS_GetGlyphNameFunc)&psaux_get_glyph_name,
(PS_FreeGlyphNameFunc)NULL,
(FT_Pointer)face );
}
FT_CALLBACK_DEF( void )
t1_cmap_unicode_done( PS_Unicodes unicodes )
{
FT_Face face = FT_CMAP_FACE( unicodes );
FT_Memory memory = FT_FACE_MEMORY( face );
FT_FREE( unicodes->maps );
unicodes->num_maps = 0;
}
FT_CALLBACK_DEF( FT_UInt )
t1_cmap_unicode_char_index( PS_Unicodes unicodes,
FT_UInt32 char_code )
{
T1_Face face = (T1_Face)FT_CMAP_FACE( unicodes );
FT_Service_PsCMaps psnames = (FT_Service_PsCMaps)face->psnames;
return psnames->unicodes_char_index( unicodes, char_code );
}
FT_CALLBACK_DEF( FT_UInt32 )
t1_cmap_unicode_char_next( PS_Unicodes unicodes,
FT_UInt32 *pchar_code )
{
T1_Face face = (T1_Face)FT_CMAP_FACE( unicodes );
FT_Service_PsCMaps psnames = (FT_Service_PsCMaps)face->psnames;
return psnames->unicodes_char_next( unicodes, pchar_code );
}
FT_CALLBACK_TABLE_DEF const FT_CMap_ClassRec
t1_cmap_unicode_class_rec =
{
sizeof ( PS_UnicodesRec ),
(FT_CMap_InitFunc) t1_cmap_unicode_init,
(FT_CMap_DoneFunc) t1_cmap_unicode_done,
(FT_CMap_CharIndexFunc)t1_cmap_unicode_char_index,
(FT_CMap_CharNextFunc) t1_cmap_unicode_char_next,
NULL, NULL, NULL, NULL, NULL
};
/* END */
/***************************************************************************/
/* */
/* afmparse.c */
/* */
/* AFM parser (body). */
/* */
/* Copyright 2006-2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* AFM_Stream */
/* */
/* The use of AFM_Stream is largely inspired by parseAFM.[ch] from t1lib. */
/* */
/* */
enum
{
AFM_STREAM_STATUS_NORMAL,
AFM_STREAM_STATUS_EOC,
AFM_STREAM_STATUS_EOL,
AFM_STREAM_STATUS_EOF
};
typedef struct AFM_StreamRec_
{
FT_Byte* cursor;
FT_Byte* base;
FT_Byte* limit;
FT_Int status;
} AFM_StreamRec;
#ifndef EOF
#define EOF -1
#endif
/* this works because empty lines are ignored */
#define AFM_IS_NEWLINE( ch ) ( (ch) == '\r' || (ch) == '\n' )
#define AFM_IS_EOF( ch ) ( (ch) == EOF || (ch) == '\x1a' )
#define AFM_IS_SPACE( ch ) ( (ch) == ' ' || (ch) == '\t' )
/* column separator; there is no `column' in the spec actually */
#define AFM_IS_SEP( ch ) ( (ch) == ';' )
#define AFM_GETC() \
( ( (stream)->cursor < (stream)->limit ) ? *(stream)->cursor++ \
: EOF )
#define AFM_STREAM_KEY_BEGIN( stream ) \
(char*)( (stream)->cursor - 1 )
#define AFM_STREAM_KEY_LEN( stream, key ) \
( (char*)(stream)->cursor - key - 1 )
#define AFM_STATUS_EOC( stream ) \
( (stream)->status >= AFM_STREAM_STATUS_EOC )
#define AFM_STATUS_EOL( stream ) \
( (stream)->status >= AFM_STREAM_STATUS_EOL )
#define AFM_STATUS_EOF( stream ) \
( (stream)->status >= AFM_STREAM_STATUS_EOF )
static int
afm_stream_skip_spaces( AFM_Stream stream )
{
/* make stupid compiler happy */
int ch = 0;
if ( AFM_STATUS_EOC( stream ) )
return ';';
while ( 1 )
{
ch = AFM_GETC();
if ( !AFM_IS_SPACE( ch ) )
break;
}
if ( AFM_IS_NEWLINE( ch ) )
stream->status = AFM_STREAM_STATUS_EOL;
else if ( AFM_IS_SEP( ch ) )
stream->status = AFM_STREAM_STATUS_EOC;
else if ( AFM_IS_EOF( ch ) )
stream->status = AFM_STREAM_STATUS_EOF;
return ch;
}
/* read a key or value in current column */
static char*
afm_stream_read_one( AFM_Stream stream )
{
char* str;
int ch;
afm_stream_skip_spaces( stream );
if ( AFM_STATUS_EOC( stream ) )
return NULL;
str = AFM_STREAM_KEY_BEGIN( stream );
while ( 1 )
{
ch = AFM_GETC();
if ( AFM_IS_SPACE( ch ) )
break;
else if ( AFM_IS_NEWLINE( ch ) )
{
stream->status = AFM_STREAM_STATUS_EOL;
break;
}
else if ( AFM_IS_SEP( ch ) )
{
stream->status = AFM_STREAM_STATUS_EOC;
break;
}
else if ( AFM_IS_EOF( ch ) )
{
stream->status = AFM_STREAM_STATUS_EOF;
break;
}
}
return str;
}
/* read a string (i.e., read to EOL) */
static char*
afm_stream_read_string( AFM_Stream stream )
{
char* str;
int ch;
afm_stream_skip_spaces( stream );
if ( AFM_STATUS_EOL( stream ) )
return NULL;
str = AFM_STREAM_KEY_BEGIN( stream );
/* scan to eol */
while ( 1 )
{
ch = AFM_GETC();
if ( AFM_IS_NEWLINE( ch ) )
{
stream->status = AFM_STREAM_STATUS_EOL;
break;
}
else if ( AFM_IS_EOF( ch ) )
{
stream->status = AFM_STREAM_STATUS_EOF;
break;
}
}
return str;
}
/*************************************************************************/
/* */
/* AFM_Parser */
/* */
/* */
/* all keys defined in Ch. 7-10 of 5004.AFM_Spec.pdf */
typedef enum AFM_Token_
{
AFM_TOKEN_ASCENDER,
AFM_TOKEN_AXISLABEL,
AFM_TOKEN_AXISTYPE,
AFM_TOKEN_B,
AFM_TOKEN_BLENDAXISTYPES,
AFM_TOKEN_BLENDDESIGNMAP,
AFM_TOKEN_BLENDDESIGNPOSITIONS,
AFM_TOKEN_C,
AFM_TOKEN_CC,
AFM_TOKEN_CH,
AFM_TOKEN_CAPHEIGHT,
AFM_TOKEN_CHARWIDTH,
AFM_TOKEN_CHARACTERSET,
AFM_TOKEN_CHARACTERS,
AFM_TOKEN_DESCENDER,
AFM_TOKEN_ENCODINGSCHEME,
AFM_TOKEN_ENDAXIS,
AFM_TOKEN_ENDCHARMETRICS,
AFM_TOKEN_ENDCOMPOSITES,
AFM_TOKEN_ENDDIRECTION,
AFM_TOKEN_ENDFONTMETRICS,
AFM_TOKEN_ENDKERNDATA,
AFM_TOKEN_ENDKERNPAIRS,
AFM_TOKEN_ENDTRACKKERN,
AFM_TOKEN_ESCCHAR,
AFM_TOKEN_FAMILYNAME,
AFM_TOKEN_FONTBBOX,
AFM_TOKEN_FONTNAME,
AFM_TOKEN_FULLNAME,
AFM_TOKEN_ISBASEFONT,
AFM_TOKEN_ISCIDFONT,
AFM_TOKEN_ISFIXEDPITCH,
AFM_TOKEN_ISFIXEDV,
AFM_TOKEN_ITALICANGLE,
AFM_TOKEN_KP,
AFM_TOKEN_KPH,
AFM_TOKEN_KPX,
AFM_TOKEN_KPY,
AFM_TOKEN_L,
AFM_TOKEN_MAPPINGSCHEME,
AFM_TOKEN_METRICSSETS,
AFM_TOKEN_N,
AFM_TOKEN_NOTICE,
AFM_TOKEN_PCC,
AFM_TOKEN_STARTAXIS,
AFM_TOKEN_STARTCHARMETRICS,
AFM_TOKEN_STARTCOMPOSITES,
AFM_TOKEN_STARTDIRECTION,
AFM_TOKEN_STARTFONTMETRICS,
AFM_TOKEN_STARTKERNDATA,
AFM_TOKEN_STARTKERNPAIRS,
AFM_TOKEN_STARTKERNPAIRS0,
AFM_TOKEN_STARTKERNPAIRS1,
AFM_TOKEN_STARTTRACKKERN,
AFM_TOKEN_STDHW,
AFM_TOKEN_STDVW,
AFM_TOKEN_TRACKKERN,
AFM_TOKEN_UNDERLINEPOSITION,
AFM_TOKEN_UNDERLINETHICKNESS,
AFM_TOKEN_VV,
AFM_TOKEN_VVECTOR,
AFM_TOKEN_VERSION,
AFM_TOKEN_W,
AFM_TOKEN_W0,
AFM_TOKEN_W0X,
AFM_TOKEN_W0Y,
AFM_TOKEN_W1,
AFM_TOKEN_W1X,
AFM_TOKEN_W1Y,
AFM_TOKEN_WX,
AFM_TOKEN_WY,
AFM_TOKEN_WEIGHT,
AFM_TOKEN_WEIGHTVECTOR,
AFM_TOKEN_XHEIGHT,
N_AFM_TOKENS,
AFM_TOKEN_UNKNOWN
} AFM_Token;
static const char* const afm_key_table[N_AFM_TOKENS] =
{
"Ascender",
"AxisLabel",
"AxisType",
"B",
"BlendAxisTypes",
"BlendDesignMap",
"BlendDesignPositions",
"C",
"CC",
"CH",
"CapHeight",
"CharWidth",
"CharacterSet",
"Characters",
"Descender",
"EncodingScheme",
"EndAxis",
"EndCharMetrics",
"EndComposites",
"EndDirection",
"EndFontMetrics",
"EndKernData",
"EndKernPairs",
"EndTrackKern",
"EscChar",
"FamilyName",
"FontBBox",
"FontName",
"FullName",
"IsBaseFont",
"IsCIDFont",
"IsFixedPitch",
"IsFixedV",
"ItalicAngle",
"KP",
"KPH",
"KPX",
"KPY",
"L",
"MappingScheme",
"MetricsSets",
"N",
"Notice",
"PCC",
"StartAxis",
"StartCharMetrics",
"StartComposites",
"StartDirection",
"StartFontMetrics",
"StartKernData",
"StartKernPairs",
"StartKernPairs0",
"StartKernPairs1",
"StartTrackKern",
"StdHW",
"StdVW",
"TrackKern",
"UnderlinePosition",
"UnderlineThickness",
"VV",
"VVector",
"Version",
"W",
"W0",
"W0X",
"W0Y",
"W1",
"W1X",
"W1Y",
"WX",
"WY",
"Weight",
"WeightVector",
"XHeight"
};
/*
* `afm_parser_read_vals' and `afm_parser_next_key' provide
* high-level operations to an AFM_Stream. The rest of the
* parser functions should use them without accessing the
* AFM_Stream directly.
*/
FT_LOCAL_DEF( FT_Int )
afm_parser_read_vals( AFM_Parser parser,
AFM_Value vals,
FT_UInt n )
{
AFM_Stream stream = parser->stream;
char* str;
FT_UInt i;
if ( n > AFM_MAX_ARGUMENTS )
return 0;
for ( i = 0; i < n; i++ )
{
FT_Offset len;
AFM_Value val = vals + i;
if ( val->type == AFM_VALUE_TYPE_STRING )
str = afm_stream_read_string( stream );
else
str = afm_stream_read_one( stream );
if ( !str )
break;
len = AFM_STREAM_KEY_LEN( stream, str );
switch ( val->type )
{
case AFM_VALUE_TYPE_STRING:
case AFM_VALUE_TYPE_NAME:
{
FT_Memory memory = parser->memory;
FT_Error error;
if ( !FT_QALLOC( val->u.s, len + 1 ) )
{
ft_memcpy( val->u.s, str, len );
val->u.s[len] = '\0';
}
}
break;
case AFM_VALUE_TYPE_FIXED:
val->u.f = PS_Conv_ToFixed( (FT_Byte**)(void*)&str,
(FT_Byte*)str + len, 0 );
break;
case AFM_VALUE_TYPE_INTEGER:
val->u.i = PS_Conv_ToInt( (FT_Byte**)(void*)&str,
(FT_Byte*)str + len );
break;
case AFM_VALUE_TYPE_BOOL:
val->u.b = FT_BOOL( len == 4 &&
!ft_strncmp( str, "true", 4 ) );
break;
case AFM_VALUE_TYPE_INDEX:
if ( parser->get_index )
val->u.i = parser->get_index( str, len, parser->user_data );
else
val->u.i = 0;
break;
}
}
return i;
}
FT_LOCAL_DEF( char* )
afm_parser_next_key( AFM_Parser parser,
FT_Bool line,
FT_Offset* len )
{
AFM_Stream stream = parser->stream;
/* make stupid compiler happy */
char* key = 0;
if ( line )
{
while ( 1 )
{
/* skip current line */
if ( !AFM_STATUS_EOL( stream ) )
afm_stream_read_string( stream );
stream->status = AFM_STREAM_STATUS_NORMAL;
key = afm_stream_read_one( stream );
/* skip empty line */
if ( !key &&
!AFM_STATUS_EOF( stream ) &&
AFM_STATUS_EOL( stream ) )
continue;
break;
}
}
else
{
while ( 1 )
{
/* skip current column */
while ( !AFM_STATUS_EOC( stream ) )
afm_stream_read_one( stream );
stream->status = AFM_STREAM_STATUS_NORMAL;
key = afm_stream_read_one( stream );
/* skip empty column */
if ( !key &&
!AFM_STATUS_EOF( stream ) &&
AFM_STATUS_EOC( stream ) )
continue;
break;
}
}
if ( len )
*len = ( key ) ? (FT_Offset)AFM_STREAM_KEY_LEN( stream, key )
: 0;
return key;
}
static AFM_Token
afm_tokenize( const char* key,
FT_Offset len )
{
int n;
for ( n = 0; n < N_AFM_TOKENS; n++ )
{
if ( *( afm_key_table[n] ) == *key )
{
for ( ; n < N_AFM_TOKENS; n++ )
{
if ( *( afm_key_table[n] ) != *key )
return AFM_TOKEN_UNKNOWN;
if ( ft_strncmp( afm_key_table[n], key, len ) == 0 )
return (AFM_Token) n;
}
}
}
return AFM_TOKEN_UNKNOWN;
}
FT_LOCAL_DEF( FT_Error )
afm_parser_init( AFM_Parser parser,
FT_Memory memory,
FT_Byte* base,
FT_Byte* limit )
{
AFM_Stream stream = NULL;
FT_Error error;
if ( FT_NEW( stream ) )
return error;
stream->cursor = stream->base = base;
stream->limit = limit;
/* don't skip the first line during the first call */
stream->status = AFM_STREAM_STATUS_EOL;
parser->memory = memory;
parser->stream = stream;
parser->FontInfo = NULL;
parser->get_index = NULL;
return PSaux_Err_Ok;
}
FT_LOCAL( void )
afm_parser_done( AFM_Parser parser )
{
FT_Memory memory = parser->memory;
FT_FREE( parser->stream );
}
FT_LOCAL_DEF( FT_Error )
afm_parser_read_int( AFM_Parser parser,
FT_Int* aint )
{
AFM_ValueRec val;
val.type = AFM_VALUE_TYPE_INTEGER;
if ( afm_parser_read_vals( parser, &val, 1 ) == 1 )
{
*aint = val.u.i;
return PSaux_Err_Ok;
}
else
return PSaux_Err_Syntax_Error;
}
static FT_Error
afm_parse_track_kern( AFM_Parser parser )
{
AFM_FontInfo fi = parser->FontInfo;
AFM_TrackKern tk;
char* key;
FT_Offset len;
int n = -1;
if ( afm_parser_read_int( parser, &fi->NumTrackKern ) )
goto Fail;
if ( fi->NumTrackKern )
{
FT_Memory memory = parser->memory;
FT_Error error;
if ( FT_QNEW_ARRAY( fi->TrackKerns, fi->NumTrackKern ) )
return error;
}
while ( ( key = afm_parser_next_key( parser, 1, &len ) ) != 0 )
{
AFM_ValueRec shared_vals[5];
switch ( afm_tokenize( key, len ) )
{
case AFM_TOKEN_TRACKKERN:
n++;
if ( n >= fi->NumTrackKern )
goto Fail;
tk = fi->TrackKerns + n;
shared_vals[0].type = AFM_VALUE_TYPE_INTEGER;
shared_vals[1].type = AFM_VALUE_TYPE_FIXED;
shared_vals[2].type = AFM_VALUE_TYPE_FIXED;
shared_vals[3].type = AFM_VALUE_TYPE_FIXED;
shared_vals[4].type = AFM_VALUE_TYPE_FIXED;
if ( afm_parser_read_vals( parser, shared_vals, 5 ) != 5 )
goto Fail;
tk->degree = shared_vals[0].u.i;
tk->min_ptsize = shared_vals[1].u.f;
tk->min_kern = shared_vals[2].u.f;
tk->max_ptsize = shared_vals[3].u.f;
tk->max_kern = shared_vals[4].u.f;
break;
case AFM_TOKEN_ENDTRACKKERN:
case AFM_TOKEN_ENDKERNDATA:
case AFM_TOKEN_ENDFONTMETRICS:
fi->NumTrackKern = n + 1;
return PSaux_Err_Ok;
case AFM_TOKEN_UNKNOWN:
break;
default:
goto Fail;
}
}
Fail:
return PSaux_Err_Syntax_Error;
}
#undef KERN_INDEX
#define KERN_INDEX( g1, g2 ) ( ( (FT_ULong)g1 << 16 ) | g2 )
/* compare two kerning pairs */
FT_CALLBACK_DEF( int )
afm_compare_kern_pairs( const void* a,
const void* b )
{
AFM_KernPair kp1 = (AFM_KernPair)a;
AFM_KernPair kp2 = (AFM_KernPair)b;
FT_ULong index1 = KERN_INDEX( kp1->index1, kp1->index2 );
FT_ULong index2 = KERN_INDEX( kp2->index1, kp2->index2 );
if ( index1 > index2 )
return 1;
else if ( index1 < index2 )
return -1;
else
return 0;
}
static FT_Error
afm_parse_kern_pairs( AFM_Parser parser )
{
AFM_FontInfo fi = parser->FontInfo;
AFM_KernPair kp;
char* key;
FT_Offset len;
int n = -1;
if ( afm_parser_read_int( parser, &fi->NumKernPair ) )
goto Fail;
if ( fi->NumKernPair )
{
FT_Memory memory = parser->memory;
FT_Error error;
if ( FT_QNEW_ARRAY( fi->KernPairs, fi->NumKernPair ) )
return error;
}
while ( ( key = afm_parser_next_key( parser, 1, &len ) ) != 0 )
{
AFM_Token token = afm_tokenize( key, len );
switch ( token )
{
case AFM_TOKEN_KP:
case AFM_TOKEN_KPX:
case AFM_TOKEN_KPY:
{
FT_Int r;
AFM_ValueRec shared_vals[4];
n++;
if ( n >= fi->NumKernPair )
goto Fail;
kp = fi->KernPairs + n;
shared_vals[0].type = AFM_VALUE_TYPE_INDEX;
shared_vals[1].type = AFM_VALUE_TYPE_INDEX;
shared_vals[2].type = AFM_VALUE_TYPE_INTEGER;
shared_vals[3].type = AFM_VALUE_TYPE_INTEGER;
r = afm_parser_read_vals( parser, shared_vals, 4 );
if ( r < 3 )
goto Fail;
kp->index1 = shared_vals[0].u.i;
kp->index2 = shared_vals[1].u.i;
if ( token == AFM_TOKEN_KPY )
{
kp->x = 0;
kp->y = shared_vals[2].u.i;
}
else
{
kp->x = shared_vals[2].u.i;
kp->y = ( token == AFM_TOKEN_KP && r == 4 )
? shared_vals[3].u.i : 0;
}
}
break;
case AFM_TOKEN_ENDKERNPAIRS:
case AFM_TOKEN_ENDKERNDATA:
case AFM_TOKEN_ENDFONTMETRICS:
fi->NumKernPair = n + 1;
ft_qsort( fi->KernPairs, fi->NumKernPair,
sizeof ( AFM_KernPairRec ),
afm_compare_kern_pairs );
return PSaux_Err_Ok;
case AFM_TOKEN_UNKNOWN:
break;
default:
goto Fail;
}
}
Fail:
return PSaux_Err_Syntax_Error;
}
static FT_Error
afm_parse_kern_data( AFM_Parser parser )
{
FT_Error error;
char* key;
FT_Offset len;
while ( ( key = afm_parser_next_key( parser, 1, &len ) ) != 0 )
{
switch ( afm_tokenize( key, len ) )
{
case AFM_TOKEN_STARTTRACKKERN:
error = afm_parse_track_kern( parser );
if ( error )
return error;
break;
case AFM_TOKEN_STARTKERNPAIRS:
case AFM_TOKEN_STARTKERNPAIRS0:
error = afm_parse_kern_pairs( parser );
if ( error )
return error;
break;
case AFM_TOKEN_ENDKERNDATA:
case AFM_TOKEN_ENDFONTMETRICS:
return PSaux_Err_Ok;
case AFM_TOKEN_UNKNOWN:
break;
default:
goto Fail;
}
}
Fail:
return PSaux_Err_Syntax_Error;
}
static FT_Error
afm_parser_skip_section( AFM_Parser parser,
FT_UInt n,
AFM_Token end_section )
{
char* key;
FT_Offset len;
while ( n-- > 0 )
{
key = afm_parser_next_key( parser, 1, NULL );
if ( !key )
goto Fail;
}
while ( ( key = afm_parser_next_key( parser, 1, &len ) ) != 0 )
{
AFM_Token token = afm_tokenize( key, len );
if ( token == end_section || token == AFM_TOKEN_ENDFONTMETRICS )
return PSaux_Err_Ok;
}
Fail:
return PSaux_Err_Syntax_Error;
}
FT_LOCAL_DEF( FT_Error )
afm_parser_parse( AFM_Parser parser )
{
FT_Memory memory = parser->memory;
AFM_FontInfo fi = parser->FontInfo;
FT_Error error = PSaux_Err_Syntax_Error;
char* key;
FT_Offset len;
FT_Int metrics_sets = 0;
if ( !fi )
return PSaux_Err_Invalid_Argument;
key = afm_parser_next_key( parser, 1, &len );
if ( !key || len != 16 ||
ft_strncmp( key, "StartFontMetrics", 16 ) != 0 )
return PSaux_Err_Unknown_File_Format;
while ( ( key = afm_parser_next_key( parser, 1, &len ) ) != 0 )
{
AFM_ValueRec shared_vals[4];
switch ( afm_tokenize( key, len ) )
{
case AFM_TOKEN_METRICSSETS:
if ( afm_parser_read_int( parser, &metrics_sets ) )
goto Fail;
if ( metrics_sets != 0 && metrics_sets != 2 )
{
error = PSaux_Err_Unimplemented_Feature;
goto Fail;
}
break;
case AFM_TOKEN_ISCIDFONT:
shared_vals[0].type = AFM_VALUE_TYPE_BOOL;
if ( afm_parser_read_vals( parser, shared_vals, 1 ) != 1 )
goto Fail;
fi->IsCIDFont = shared_vals[0].u.b;
break;
case AFM_TOKEN_FONTBBOX:
shared_vals[0].type = AFM_VALUE_TYPE_FIXED;
shared_vals[1].type = AFM_VALUE_TYPE_FIXED;
shared_vals[2].type = AFM_VALUE_TYPE_FIXED;
shared_vals[3].type = AFM_VALUE_TYPE_FIXED;
if ( afm_parser_read_vals( parser, shared_vals, 4 ) != 4 )
goto Fail;
fi->FontBBox.xMin = shared_vals[0].u.f;
fi->FontBBox.yMin = shared_vals[1].u.f;
fi->FontBBox.xMax = shared_vals[2].u.f;
fi->FontBBox.yMax = shared_vals[3].u.f;
break;
case AFM_TOKEN_ASCENDER:
shared_vals[0].type = AFM_VALUE_TYPE_FIXED;
if ( afm_parser_read_vals( parser, shared_vals, 1 ) != 1 )
goto Fail;
fi->Ascender = shared_vals[0].u.f;
break;
case AFM_TOKEN_DESCENDER:
shared_vals[0].type = AFM_VALUE_TYPE_FIXED;
if ( afm_parser_read_vals( parser, shared_vals, 1 ) != 1 )
goto Fail;
fi->Descender = shared_vals[0].u.f;
break;
case AFM_TOKEN_STARTCHARMETRICS:
{
FT_Int n = 0;
if ( afm_parser_read_int( parser, &n ) )
goto Fail;
error = afm_parser_skip_section( parser, n,
AFM_TOKEN_ENDCHARMETRICS );
if ( error )
return error;
}
break;
case AFM_TOKEN_STARTKERNDATA:
error = afm_parse_kern_data( parser );
if ( error )
goto Fail;
/* fall through since we only support kern data */
case AFM_TOKEN_ENDFONTMETRICS:
return PSaux_Err_Ok;
default:
break;
}
}
Fail:
FT_FREE( fi->TrackKerns );
fi->NumTrackKern = 0;
FT_FREE( fi->KernPairs );
fi->NumKernPair = 0;
fi->IsCIDFont = 0;
return error;
}
/* END */
/***************************************************************************/
/* */
/* psconv.c */
/* */
/* Some convenience conversions (body). */
/* */
/* Copyright 2006, 2008, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_psconv
/* The following array is used by various functions to quickly convert */
/* digits (both decimal and non-decimal) into numbers. */
#if 'A' == 65
/* ASCII */
static const FT_Char ft_char_table[128] =
{
/* 0x00 */
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, -1, -1, -1, -1, -1, -1,
-1, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, -1, -1, -1, -1, -1,
-1, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, -1, -1, -1, -1, -1,
};
/* no character >= 0x80 can represent a valid number */
#define OP >=
/* 'A' == 65 */
#endif
#if 'A' == 193
/* EBCDIC */
static const FT_Char ft_char_table[128] =
{
/* 0x80 */
-1, 10, 11, 12, 13, 14, 15, 16, 17, 18, -1, -1, -1, -1, -1, -1,
-1, 19, 20, 21, 22, 23, 24, 25, 26, 27, -1, -1, -1, -1, -1, -1,
-1, -1, 28, 29, 30, 31, 32, 33, 34, 35, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, 10, 11, 12, 13, 14, 15, 16, 17, 18, -1, -1, -1, -1, -1, -1,
-1, 19, 20, 21, 22, 23, 24, 25, 26, 27, -1, -1, -1, -1, -1, -1,
-1, -1, 28, 29, 30, 31, 32, 33, 34, 35, -1, -1, -1, -1, -1, -1,
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, -1, -1, -1, -1, -1, -1,
};
/* no character < 0x80 can represent a valid number */
#define OP <
/* 'A' == 193 */
#endif
FT_LOCAL_DEF( FT_Long )
PS_Conv_Strtol( FT_Byte** cursor,
FT_Byte* limit,
FT_Long base )
{
FT_Byte* p = *cursor;
FT_Long num = 0;
FT_Bool sign = 0;
FT_Bool have_overflow = 0;
FT_Long num_limit;
FT_Char c_limit;
if ( p >= limit )
goto Bad;
if ( base < 2 || base > 36 )
{
FT_TRACE4(( "!!!INVALID BASE:!!!" ));
return 0;
}
if ( *p == '-' || *p == '+' )
{
sign = FT_BOOL( *p == '-' );
p++;
if ( p == limit )
goto Bad;
}
num_limit = 0x7FFFFFFFL / base;
c_limit = (FT_Char)( 0x7FFFFFFFL % base );
for ( ; p < limit; p++ )
{
FT_Char c;
if ( IS_PS_SPACE( *p ) || *p OP 0x80 )
break;
c = ft_char_table[*p & 0x7f];
if ( c < 0 || c >= base )
break;
if ( num > num_limit || ( num == num_limit && c > c_limit ) )
have_overflow = 1;
else
num = num * base + c;
}
*cursor = p;
if ( have_overflow )
{
num = 0x7FFFFFFFL;
FT_TRACE4(( "!!!OVERFLOW:!!!" ));
}
if ( sign )
num = -num;
return num;
Bad:
FT_TRACE4(( "!!!END OF DATA:!!!" ));
return 0;
}
FT_LOCAL_DEF( FT_Long )
PS_Conv_ToInt( FT_Byte** cursor,
FT_Byte* limit )
{
FT_Byte* p = *cursor;
FT_Byte* curp;
FT_Long num;
curp = p;
num = PS_Conv_Strtol( &p, limit, 10 );
if ( p == curp )
return 0;
if ( p < limit && *p == '#' )
{
p++;
curp = p;
num = PS_Conv_Strtol( &p, limit, num );
if ( p == curp )
return 0;
}
*cursor = p;
return num;
}
FT_LOCAL_DEF( FT_Fixed )
PS_Conv_ToFixed( FT_Byte** cursor,
FT_Byte* limit,
FT_Long power_ten )
{
FT_Byte* p = *cursor;
FT_Byte* curp;
FT_Fixed integral = 0;
FT_Long decimal = 0;
FT_Long divider = 1;
FT_Bool sign = 0;
FT_Bool have_overflow = 0;
FT_Bool have_underflow = 0;
if ( p >= limit )
goto Bad;
if ( *p == '-' || *p == '+' )
{
sign = FT_BOOL( *p == '-' );
p++;
if ( p == limit )
goto Bad;
}
/* read the integer part */
if ( *p != '.' )
{
curp = p;
integral = PS_Conv_ToInt( &p, limit );
if ( p == curp )
return 0;
if ( integral > 0x7FFF )
have_overflow = 1;
else
integral <<= 16;
}
/* read the decimal part */
if ( p < limit && *p == '.' )
{
p++;
for ( ; p < limit; p++ )
{
FT_Char c;
if ( IS_PS_SPACE( *p ) || *p OP 0x80 )
break;
c = ft_char_table[*p & 0x7f];
if ( c < 0 || c >= 10 )
break;
if ( decimal < 0xCCCCCCCL )
{
decimal = decimal * 10 + c;
if ( !integral && power_ten > 0 )
power_ten--;
else
divider *= 10;
}
}
}
/* read exponent, if any */
if ( p + 1 < limit && ( *p == 'e' || *p == 'E' ) )
{
FT_Long exponent;
p++;
curp = p;
exponent = PS_Conv_ToInt( &p, limit );
if ( curp == p )
return 0;
/* arbitrarily limit exponent */
if ( exponent > 1000 )
have_overflow = 1;
else if ( exponent < -1000 )
have_underflow = 1;
else
power_ten += exponent;
}
*cursor = p;
if ( !integral && !decimal )
return 0;
if ( have_overflow )
goto Overflow;
if ( have_underflow )
goto Underflow;
while ( power_ten > 0 )
{
if ( integral >= 0xCCCCCCCL )
goto Overflow;
integral *= 10;
if ( decimal >= 0xCCCCCCCL )
{
if ( divider == 1 )
goto Overflow;
divider /= 10;
}
else
decimal *= 10;
power_ten--;
}
while ( power_ten < 0 )
{
integral /= 10;
if ( divider < 0xCCCCCCCL )
divider *= 10;
else
decimal /= 10;
if ( !integral && !decimal )
goto Underflow;
power_ten++;
}
if ( decimal )
{
decimal = FT_DivFix( decimal, divider );
/* it's not necessary to check this addition for overflow */
/* due to the structure of the real number representation */
integral += decimal;
}
Exit:
if ( sign )
integral = -integral;
return integral;
Bad:
FT_TRACE4(( "!!!END OF DATA:!!!" ));
return 0;
Overflow:
integral = 0x7FFFFFFFL;
FT_TRACE4(( "!!!OVERFLOW:!!!" ));
goto Exit;
Underflow:
FT_TRACE4(( "!!!UNDERFLOW:!!!" ));
return 0;
}
#if 0
FT_LOCAL_DEF( FT_UInt )
PS_Conv_StringDecode( FT_Byte** cursor,
FT_Byte* limit,
FT_Byte* buffer,
FT_Offset n )
{
FT_Byte* p;
FT_UInt r = 0;
for ( p = *cursor; r < n && p < limit; p++ )
{
FT_Byte b;
if ( *p != '\\' )
{
buffer[r++] = *p;
continue;
}
p++;
switch ( *p )
{
case 'n':
b = '\n';
break;
case 'r':
b = '\r';
break;
case 't':
b = '\t';
break;
case 'b':
b = '\b';
break;
case 'f':
b = '\f';
break;
case '\r':
p++;
if ( *p != '\n' )
{
b = *p;
break;
}
/* no break */
case '\n':
continue;
break;
default:
if ( IS_PS_DIGIT( *p ) )
{
b = *p - '0';
p++;
if ( IS_PS_DIGIT( *p ) )
{
b = b * 8 + *p - '0';
p++;
if ( IS_PS_DIGIT( *p ) )
b = b * 8 + *p - '0';
else
{
buffer[r++] = b;
b = *p;
}
}
else
{
buffer[r++] = b;
b = *p;
}
}
else
b = *p;
break;
}
buffer[r++] = b;
}
*cursor = p;
return r;
}
/* 0 */
#endif
FT_LOCAL_DEF( FT_UInt )
PS_Conv_ASCIIHexDecode( FT_Byte** cursor,
FT_Byte* limit,
FT_Byte* buffer,
FT_Offset n )
{
FT_Byte* p;
FT_UInt r = 0;
FT_UInt w = 0;
FT_UInt pad = 0x01;
n *= 2;
#if 1
p = *cursor;
if ( p >= limit )
return 0;
if ( n > (FT_UInt)( limit - p ) )
n = (FT_UInt)( limit - p );
/* we try to process two nibbles at a time to be as fast as possible */
for ( ; r < n; r++ )
{
FT_UInt c = p[r];
if ( IS_PS_SPACE( c ) )
continue;
if ( c OP 0x80 )
break;
c = ft_char_table[c & 0x7F];
if ( (unsigned)c >= 16 )
break;
pad = ( pad << 4 ) | c;
if ( pad & 0x100 )
{
buffer[w++] = (FT_Byte)pad;
pad = 0x01;
}
}
if ( pad != 0x01 )
buffer[w++] = (FT_Byte)( pad << 4 );
*cursor = p + r;
return w;
/* 0 */
#else
for ( r = 0; r < n; r++ )
{
FT_Char c;
if ( IS_PS_SPACE( *p ) )
continue;
if ( *p OP 0x80 )
break;
c = ft_char_table[*p & 0x7f];
if ( (unsigned)c >= 16 )
break;
if ( r & 1 )
{
*buffer = (FT_Byte)(*buffer + c);
buffer++;
}
else
*buffer = (FT_Byte)(c << 4);
r++;
}
*cursor = p;
return ( r + 1 ) / 2;
/* 0 */
#endif
}
FT_LOCAL_DEF( FT_UInt )
PS_Conv_EexecDecode( FT_Byte** cursor,
FT_Byte* limit,
FT_Byte* buffer,
FT_Offset n,
FT_UShort* seed )
{
FT_Byte* p;
FT_UInt r;
FT_UInt s = *seed;
#if 1
p = *cursor;
if ( p >= limit )
return 0;
if ( n > (FT_UInt)(limit - p) )
n = (FT_UInt)(limit - p);
for ( r = 0; r < n; r++ )
{
FT_UInt val = p[r];
FT_UInt b = ( val ^ ( s >> 8 ) );
s = ( (val + s)*52845U + 22719 ) & 0xFFFFU;
buffer[r] = (FT_Byte) b;
}
*cursor = p + n;
*seed = (FT_UShort)s;
/* 0 */
#else
for ( r = 0, p = *cursor; r < n && p < limit; r++, p++ )
{
FT_Byte b = (FT_Byte)( *p ^ ( s >> 8 ) );
s = (FT_UShort)( ( *p + s ) * 52845U + 22719 );
*buffer++ = b;
}
*cursor = p;
*seed = s;
/* 0 */
#endif
return r;
}
/* END */
/* END */
/* pcf.c
FreeType font driver for pcf fonts
Copyright 2000-2001, 2003 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/*
Copyright 1990, 1994, 1998 The Open Group
Permission to use, copy, modify, distribute, and sell this software and its
documentation for any purpose is hereby granted without fee, provided that
the above copyright notice appear in all copies and that both that
copyright notice and this permission notice appear in supporting
documentation.
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of The Open Group shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from The Open Group.
*/
/* $XFree86: xc/lib/font/util/utilbitmap.c,v 1.3 1999/08/22 08:58:58 dawes Exp $ */
/*
* Author: Keith Packard, MIT X Consortium
*/
/* Modified for use with FreeType */
/* pcfutil.h
FreeType font driver for pcf fonts
Copyright 2000, 2001, 2004 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
#define __PCFUTIL_H__
FT_BEGIN_HEADER
FT_LOCAL( void )
BitOrderInvert( unsigned char* buf,
size_t nbytes );
FT_LOCAL( void )
TwoByteSwap( unsigned char* buf,
size_t nbytes );
FT_LOCAL( void )
FourByteSwap( unsigned char* buf,
size_t nbytes );
FT_END_HEADER
/* END */
/*
* Invert bit order within each BYTE of an array.
*/
FT_LOCAL_DEF( void )
BitOrderInvert( unsigned char* buf,
size_t nbytes )
{
for ( ; nbytes > 0; nbytes--, buf++ )
{
unsigned int val = *buf;
val = ( ( val >> 1 ) & 0x55 ) | ( ( val << 1 ) & 0xAA );
val = ( ( val >> 2 ) & 0x33 ) | ( ( val << 2 ) & 0xCC );
val = ( ( val >> 4 ) & 0x0F ) | ( ( val << 4 ) & 0xF0 );
*buf = (unsigned char)val;
}
}
/*
* Invert byte order within each 16-bits of an array.
*/
FT_LOCAL_DEF( void )
TwoByteSwap( unsigned char* buf,
size_t nbytes )
{
unsigned char c;
for ( ; nbytes >= 2; nbytes -= 2, buf += 2 )
{
c = buf[0];
buf[0] = buf[1];
buf[1] = c;
}
}
/*
* Invert byte order within each 32-bits of an array.
*/
FT_LOCAL_DEF( void )
FourByteSwap( unsigned char* buf,
size_t nbytes )
{
unsigned char c;
for ( ; nbytes >= 4; nbytes -= 4, buf += 4 )
{
c = buf[0];
buf[0] = buf[3];
buf[3] = c;
c = buf[1];
buf[1] = buf[2];
buf[2] = c;
}
}
/* END */
/* pcfread.c
FreeType font driver for pcf fonts
Copyright 2000-2010, 2012 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
/* pcf.h
FreeType font driver for pcf fonts
Copyright (C) 2000, 2001, 2002, 2003, 2006, 2010 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
#define __PCF_H__
FT_BEGIN_HEADER
typedef struct PCF_TableRec_
{
FT_ULong type;
FT_ULong format;
FT_ULong size;
FT_ULong offset;
} PCF_TableRec, *PCF_Table;
typedef struct PCF_TocRec_
{
FT_ULong version;
FT_ULong count;
PCF_Table tables;
} PCF_TocRec, *PCF_Toc;
typedef struct PCF_ParsePropertyRec_
{
FT_Long name;
FT_Byte isString;
FT_Long value;
} PCF_ParsePropertyRec, *PCF_ParseProperty;
typedef struct PCF_PropertyRec_
{
FT_String* name;
FT_Byte isString;
union
{
FT_String* atom;
FT_Long l;
FT_ULong ul;
} value;
} PCF_PropertyRec, *PCF_Property;
typedef struct PCF_Compressed_MetricRec_
{
FT_Byte leftSideBearing;
FT_Byte rightSideBearing;
FT_Byte characterWidth;
FT_Byte ascent;
FT_Byte descent;
} PCF_Compressed_MetricRec, *PCF_Compressed_Metric;
typedef struct PCF_MetricRec_
{
FT_Short leftSideBearing;
FT_Short rightSideBearing;
FT_Short characterWidth;
FT_Short ascent;
FT_Short descent;
FT_Short attributes;
FT_ULong bits;
} PCF_MetricRec, *PCF_Metric;
typedef struct PCF_AccelRec_
{
FT_Byte noOverlap;
FT_Byte constantMetrics;
FT_Byte terminalFont;
FT_Byte constantWidth;
FT_Byte inkInside;
FT_Byte inkMetrics;
FT_Byte drawDirection;
FT_Long fontAscent;
FT_Long fontDescent;
FT_Long maxOverlap;
PCF_MetricRec minbounds;
PCF_MetricRec maxbounds;
PCF_MetricRec ink_minbounds;
PCF_MetricRec ink_maxbounds;
} PCF_AccelRec, *PCF_Accel;
typedef struct PCF_EncodingRec_
{
FT_Long enc;
FT_UShort glyph;
} PCF_EncodingRec, *PCF_Encoding;
typedef struct PCF_FaceRec_
{
FT_FaceRec root;
FT_StreamRec comp_stream;
FT_Stream comp_source;
char* charset_encoding;
char* charset_registry;
PCF_TocRec toc;
PCF_AccelRec accel;
int nprops;
PCF_Property properties;
FT_Long nmetrics;
PCF_Metric metrics;
FT_Long nencodings;
PCF_Encoding encodings;
FT_Short defaultChar;
FT_ULong bitmapsFormat;
FT_CharMap charmap_handle;
/* a single charmap per face */
FT_CharMapRec charmap;
} PCF_FaceRec, *PCF_Face;
/* macros for pcf font format */
#define LSBFirst 0
#define MSBFirst 1
#define PCF_FILE_VERSION ( ( 'p' << 24 ) | \
( 'c' << 16 ) | \
( 'f' << 8 ) | 1 )
#define PCF_FORMAT_MASK 0xFFFFFF00UL
#define PCF_DEFAULT_FORMAT 0x00000000UL
#define PCF_INKBOUNDS 0x00000200UL
#define PCF_ACCEL_W_INKBOUNDS 0x00000100UL
#define PCF_COMPRESSED_METRICS 0x00000100UL
#define PCF_FORMAT_MATCH( a, b ) \
( ( (a) & PCF_FORMAT_MASK ) == ( (b) & PCF_FORMAT_MASK ) )
#define PCF_GLYPH_PAD_MASK ( 3 << 0 )
#define PCF_BYTE_MASK ( 1 << 2 )
#define PCF_BIT_MASK ( 1 << 3 )
#define PCF_SCAN_UNIT_MASK ( 3 << 4 )
#define PCF_BYTE_ORDER( f ) \
( ( (f) & PCF_BYTE_MASK ) ? MSBFirst : LSBFirst )
#define PCF_BIT_ORDER( f ) \
( ( (f) & PCF_BIT_MASK ) ? MSBFirst : LSBFirst )
#define PCF_GLYPH_PAD_INDEX( f ) \
( (f) & PCF_GLYPH_PAD_MASK )
#define PCF_GLYPH_PAD( f ) \
( 1 << PCF_GLYPH_PAD_INDEX( f ) )
#define PCF_SCAN_UNIT_INDEX( f ) \
( ( (f) & PCF_SCAN_UNIT_MASK ) >> 4 )
#define PCF_SCAN_UNIT( f ) \
( 1 << PCF_SCAN_UNIT_INDEX( f ) )
#define PCF_FORMAT_BITS( f ) \
( (f) & ( PCF_GLYPH_PAD_MASK | \
PCF_BYTE_MASK | \
PCF_BIT_MASK | \
PCF_SCAN_UNIT_MASK ) )
#define PCF_SIZE_TO_INDEX( s ) ( (s) == 4 ? 2 : (s) == 2 ? 1 : 0 )
#define PCF_INDEX_TO_SIZE( b ) ( 1 << b )
#define PCF_FORMAT( bit, byte, glyph, scan ) \
( ( PCF_SIZE_TO_INDEX( scan ) << 4 ) | \
( ( (bit) == MSBFirst ? 1 : 0 ) << 3 ) | \
( ( (byte) == MSBFirst ? 1 : 0 ) << 2 ) | \
( PCF_SIZE_TO_INDEX( glyph ) << 0 ) )
#define PCF_PROPERTIES ( 1 << 0 )
#define PCF_ACCELERATORS ( 1 << 1 )
#define PCF_METRICS ( 1 << 2 )
#define PCF_BITMAPS ( 1 << 3 )
#define PCF_INK_METRICS ( 1 << 4 )
#define PCF_BDF_ENCODINGS ( 1 << 5 )
#define PCF_SWIDTHS ( 1 << 6 )
#define PCF_GLYPH_NAMES ( 1 << 7 )
#define PCF_BDF_ACCELERATORS ( 1 << 8 )
/* I'm not sure about this */
#define GLYPHPADOPTIONS 4
FT_LOCAL( FT_Error )
pcf_load_font( FT_Stream,
PCF_Face );
FT_END_HEADER
/* END */
/* pcfread.h
FreeType font driver for pcf fonts
Copyright 2003 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
#define __PCFREAD_H__
FT_BEGIN_HEADER
FT_LOCAL( PCF_Property )
pcf_find_property( PCF_Face face,
const FT_String* prop );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* pcferror.h */
/* */
/* PCF error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the PCF error enumeration constants. */
/* */
/*************************************************************************/
#define __PCFERROR_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX PCF_Err_
#define FT_ERR_BASE FT_Mod_Err_PCF
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_pcfread
static
const FT_Frame_Field pcf_toc_header[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PCF_TocRec
FT_FRAME_START( 8 ),
FT_FRAME_ULONG_LE( version ),
FT_FRAME_ULONG_LE( count ),
FT_FRAME_END
};
static
const FT_Frame_Field pcf_table_header[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PCF_TableRec
FT_FRAME_START( 16 ),
FT_FRAME_ULONG_LE( type ),
FT_FRAME_ULONG_LE( format ),
FT_FRAME_ULONG_LE( size ),
FT_FRAME_ULONG_LE( offset ),
FT_FRAME_END
};
static FT_Error
pcf_read_TOC( FT_Stream stream,
PCF_Face face )
{
FT_Error error;
PCF_Toc toc = &face->toc;
PCF_Table tables;
FT_Memory memory = FT_FACE(face)->memory;
FT_UInt n;
if ( FT_STREAM_SEEK ( 0 ) ||
FT_STREAM_READ_FIELDS ( pcf_toc_header, toc ) )
return PCF_Err_Cannot_Open_Resource;
if ( toc->version != PCF_FILE_VERSION ||
toc->count > FT_ARRAY_MAX( face->toc.tables ) ||
toc->count == 0 )
return PCF_Err_Invalid_File_Format;
if ( FT_NEW_ARRAY( face->toc.tables, toc->count ) )
return PCF_Err_Out_Of_Memory;
tables = face->toc.tables;
for ( n = 0; n < toc->count; n++ )
{
if ( FT_STREAM_READ_FIELDS( pcf_table_header, tables ) )
goto Exit;
tables++;
}
/* Sort tables and check for overlaps. Because they are almost */
/* always ordered already, an in-place bubble sort with simultaneous */
/* boundary checking seems appropriate. */
tables = face->toc.tables;
for ( n = 0; n < toc->count - 1; n++ )
{
FT_UInt i, have_change;
have_change = 0;
for ( i = 0; i < toc->count - 1 - n; i++ )
{
PCF_TableRec tmp;
if ( tables[i].offset > tables[i + 1].offset )
{
tmp = tables[i];
tables[i] = tables[i + 1];
tables[i + 1] = tmp;
have_change = 1;
}
if ( ( tables[i].size > tables[i + 1].offset ) ||
( tables[i].offset > tables[i + 1].offset - tables[i].size ) )
return PCF_Err_Invalid_Offset;
}
if ( !have_change )
break;
}
return PCF_Err_Ok;
Exit:
FT_FREE( face->toc.tables );
return error;
}
#define PCF_METRIC_SIZE 12
static
const FT_Frame_Field pcf_metric_header[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PCF_MetricRec
FT_FRAME_START( PCF_METRIC_SIZE ),
FT_FRAME_SHORT_LE( leftSideBearing ),
FT_FRAME_SHORT_LE( rightSideBearing ),
FT_FRAME_SHORT_LE( characterWidth ),
FT_FRAME_SHORT_LE( ascent ),
FT_FRAME_SHORT_LE( descent ),
FT_FRAME_SHORT_LE( attributes ),
FT_FRAME_END
};
static
const FT_Frame_Field pcf_metric_msb_header[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PCF_MetricRec
FT_FRAME_START( PCF_METRIC_SIZE ),
FT_FRAME_SHORT( leftSideBearing ),
FT_FRAME_SHORT( rightSideBearing ),
FT_FRAME_SHORT( characterWidth ),
FT_FRAME_SHORT( ascent ),
FT_FRAME_SHORT( descent ),
FT_FRAME_SHORT( attributes ),
FT_FRAME_END
};
#define PCF_COMPRESSED_METRIC_SIZE 5
static
const FT_Frame_Field pcf_compressed_metric_header[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PCF_Compressed_MetricRec
FT_FRAME_START( PCF_COMPRESSED_METRIC_SIZE ),
FT_FRAME_BYTE( leftSideBearing ),
FT_FRAME_BYTE( rightSideBearing ),
FT_FRAME_BYTE( characterWidth ),
FT_FRAME_BYTE( ascent ),
FT_FRAME_BYTE( descent ),
FT_FRAME_END
};
static FT_Error
pcf_get_metric( FT_Stream stream,
FT_ULong format,
PCF_Metric metric )
{
FT_Error error = PCF_Err_Ok;
if ( PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
{
const FT_Frame_Field* fields;
/* parsing normal metrics */
fields = PCF_BYTE_ORDER( format ) == MSBFirst
? pcf_metric_msb_header
: pcf_metric_header;
/* the following sets `error' but doesn't return in case of failure */
(void)FT_STREAM_READ_FIELDS( fields, metric );
}
else
{
PCF_Compressed_MetricRec compr;
/* parsing compressed metrics */
if ( FT_STREAM_READ_FIELDS( pcf_compressed_metric_header, &compr ) )
goto Exit;
metric->leftSideBearing = (FT_Short)( compr.leftSideBearing - 0x80 );
metric->rightSideBearing = (FT_Short)( compr.rightSideBearing - 0x80 );
metric->characterWidth = (FT_Short)( compr.characterWidth - 0x80 );
metric->ascent = (FT_Short)( compr.ascent - 0x80 );
metric->descent = (FT_Short)( compr.descent - 0x80 );
metric->attributes = 0;
}
Exit:
return error;
}
static FT_Error
pcf_seek_to_table_type( FT_Stream stream,
PCF_Table tables,
/* same as PCF_Toc->count */
FT_ULong ntables,
FT_ULong type,
FT_ULong *aformat,
FT_ULong *asize )
{
FT_Error error = PCF_Err_Invalid_File_Format;
FT_ULong i;
for ( i = 0; i < ntables; i++ )
if ( tables[i].type == type )
{
if ( stream->pos > tables[i].offset )
{
error = PCF_Err_Invalid_Stream_Skip;
goto Fail;
}
if ( FT_STREAM_SKIP( tables[i].offset - stream->pos ) )
{
error = PCF_Err_Invalid_Stream_Skip;
goto Fail;
}
*asize = tables[i].size;
*aformat = tables[i].format;
return PCF_Err_Ok;
}
Fail:
*asize = 0;
return error;
}
static FT_Bool
pcf_has_table_type( PCF_Table tables,
/* same as PCF_Toc->count */
FT_ULong ntables,
FT_ULong type )
{
FT_ULong i;
for ( i = 0; i < ntables; i++ )
if ( tables[i].type == type )
return TRUE;
return FALSE;
}
#define PCF_PROPERTY_SIZE 9
static
const FT_Frame_Field pcf_property_header[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PCF_ParsePropertyRec
FT_FRAME_START( PCF_PROPERTY_SIZE ),
FT_FRAME_LONG_LE( name ),
FT_FRAME_BYTE ( isString ),
FT_FRAME_LONG_LE( value ),
FT_FRAME_END
};
static
const FT_Frame_Field pcf_property_msb_header[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PCF_ParsePropertyRec
FT_FRAME_START( PCF_PROPERTY_SIZE ),
FT_FRAME_LONG( name ),
FT_FRAME_BYTE( isString ),
FT_FRAME_LONG( value ),
FT_FRAME_END
};
FT_LOCAL_DEF( PCF_Property )
pcf_find_property( PCF_Face face,
const FT_String* prop )
{
PCF_Property properties = face->properties;
FT_Bool found = 0;
int i;
for ( i = 0 ; i < face->nprops && !found; i++ )
{
if ( !ft_strcmp( properties[i].name, prop ) )
found = 1;
}
if ( found )
return properties + i - 1;
else
return NULL;
}
static FT_Error
pcf_get_properties( FT_Stream stream,
PCF_Face face )
{
PCF_ParseProperty props = 0;
PCF_Property properties = NULL;
FT_ULong nprops, i;
FT_ULong format, size;
FT_Error error;
FT_Memory memory = FT_FACE(face)->memory;
FT_ULong string_size;
FT_String* strings = 0;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_PROPERTIES,
&format,
&size );
if ( error )
goto Bail;
if ( FT_READ_ULONG_LE( format ) )
goto Bail;
FT_TRACE4(( "pcf_get_properties:\n" ));
FT_TRACE4(( " format = %ld\n", format ));
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
goto Bail;
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( nprops );
else
(void)FT_READ_ULONG_LE( nprops );
if ( error )
goto Bail;
FT_TRACE4(( " nprop = %d (truncate %d props)\n",
(int)nprops, nprops - (int)nprops ));
nprops = (int)nprops;
/* rough estimate */
if ( nprops > size / PCF_PROPERTY_SIZE )
{
error = PCF_Err_Invalid_Table;
goto Bail;
}
face->nprops = (int)nprops;
if ( FT_NEW_ARRAY( props, nprops ) )
goto Bail;
for ( i = 0; i < nprops; i++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
{
if ( FT_STREAM_READ_FIELDS( pcf_property_msb_header, props + i ) )
goto Bail;
}
else
{
if ( FT_STREAM_READ_FIELDS( pcf_property_header, props + i ) )
goto Bail;
}
}
/* pad the property array */
/* */
/* clever here - nprops is the same as the number of odd-units read, */
/* as only isStringProp are odd length (Keith Packard) */
/* */
if ( nprops & 3 )
{
i = 4 - ( nprops & 3 );
if ( FT_STREAM_SKIP( i ) )
{
error = PCF_Err_Invalid_Stream_Skip;
goto Bail;
}
}
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( string_size );
else
(void)FT_READ_ULONG_LE( string_size );
if ( error )
goto Bail;
FT_TRACE4(( " string_size = %ld\n", string_size ));
/* rough estimate */
if ( string_size > size - nprops * PCF_PROPERTY_SIZE )
{
error = PCF_Err_Invalid_Table;
goto Bail;
}
/* allocate one more byte so that we have a final null byte */
if ( FT_NEW_ARRAY( strings, string_size + 1 ) )
goto Bail;
error = FT_Stream_Read( stream, (FT_Byte*)strings, string_size );
if ( error )
goto Bail;
if ( FT_NEW_ARRAY( properties, nprops ) )
goto Bail;
face->properties = properties;
for ( i = 0; i < nprops; i++ )
{
FT_Long name_offset = props[i].name;
if ( ( name_offset < 0 ) ||
( (FT_ULong)name_offset > string_size ) )
{
error = PCF_Err_Invalid_Offset;
goto Bail;
}
if ( FT_STRDUP( properties[i].name, strings + name_offset ) )
goto Bail;
FT_TRACE4(( " %s:", properties[i].name ));
properties[i].isString = props[i].isString;
if ( props[i].isString )
{
FT_Long value_offset = props[i].value;
if ( ( value_offset < 0 ) ||
( (FT_ULong)value_offset > string_size ) )
{
error = PCF_Err_Invalid_Offset;
goto Bail;
}
if ( FT_STRDUP( properties[i].value.atom, strings + value_offset ) )
goto Bail;
FT_TRACE4(( " `%s'\n", properties[i].value.atom ));
}
else
{
properties[i].value.l = props[i].value;
FT_TRACE4(( " %d\n", properties[i].value.l ));
}
}
error = PCF_Err_Ok;
Bail:
FT_FREE( props );
FT_FREE( strings );
return error;
}
static FT_Error
pcf_get_metrics( FT_Stream stream,
PCF_Face face )
{
FT_Error error = PCF_Err_Ok;
FT_Memory memory = FT_FACE(face)->memory;
FT_ULong format, size;
PCF_Metric metrics = 0;
FT_ULong nmetrics, i;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_METRICS,
&format,
&size );
if ( error )
return error;
if ( FT_READ_ULONG_LE( format ) )
goto Bail;
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) &&
!PCF_FORMAT_MATCH( format, PCF_COMPRESSED_METRICS ) )
return PCF_Err_Invalid_File_Format;
if ( PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_ULONG( nmetrics );
else
(void)FT_READ_ULONG_LE( nmetrics );
}
else
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_USHORT( nmetrics );
else
(void)FT_READ_USHORT_LE( nmetrics );
}
if ( error )
return PCF_Err_Invalid_File_Format;
face->nmetrics = nmetrics;
if ( !nmetrics )
return PCF_Err_Invalid_Table;
FT_TRACE4(( "pcf_get_metrics:\n" ));
FT_TRACE4(( " number of metrics: %d\n", nmetrics ));
/* rough estimate */
if ( PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
{
if ( nmetrics > size / PCF_METRIC_SIZE )
return PCF_Err_Invalid_Table;
}
else
{
if ( nmetrics > size / PCF_COMPRESSED_METRIC_SIZE )
return PCF_Err_Invalid_Table;
}
if ( FT_NEW_ARRAY( face->metrics, nmetrics ) )
return PCF_Err_Out_Of_Memory;
metrics = face->metrics;
for ( i = 0; i < nmetrics; i++ )
{
error = pcf_get_metric( stream, format, metrics + i );
metrics[i].bits = 0;
FT_TRACE5(( " idx %d: width=%d, "
"lsb=%d, rsb=%d, ascent=%d, descent=%d, swidth=%d\n",
i,
( metrics + i )->characterWidth,
( metrics + i )->leftSideBearing,
( metrics + i )->rightSideBearing,
( metrics + i )->ascent,
( metrics + i )->descent,
( metrics + i )->attributes ));
if ( error )
break;
}
if ( error )
FT_FREE( face->metrics );
Bail:
return error;
}
static FT_Error
pcf_get_bitmaps( FT_Stream stream,
PCF_Face face )
{
FT_Error error = PCF_Err_Ok;
FT_Memory memory = FT_FACE(face)->memory;
FT_Long* offsets = NULL;
FT_Long bitmapSizes[GLYPHPADOPTIONS];
FT_ULong format, size;
FT_ULong nbitmaps, i, sizebitmaps = 0;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_BITMAPS,
&format,
&size );
if ( error )
return error;
error = FT_Stream_EnterFrame( stream, 8 );
if ( error )
return error;
format = FT_GET_ULONG_LE();
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
nbitmaps = FT_GET_ULONG();
else
nbitmaps = FT_GET_ULONG_LE();
FT_Stream_ExitFrame( stream );
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
return PCF_Err_Invalid_File_Format;
FT_TRACE4(( "pcf_get_bitmaps:\n" ));
FT_TRACE4(( " number of bitmaps: %d\n", nbitmaps ));
/* XXX: PCF_Face->nmetrics is singed FT_Long, see pcf.h */
if ( face->nmetrics < 0 || nbitmaps != ( FT_ULong )face->nmetrics )
return PCF_Err_Invalid_File_Format;
if ( FT_NEW_ARRAY( offsets, nbitmaps ) )
return error;
for ( i = 0; i < nbitmaps; i++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_LONG( offsets[i] );
else
(void)FT_READ_LONG_LE( offsets[i] );
FT_TRACE5(( " bitmap %d: offset %ld (0x%lX)\n",
i, offsets[i], offsets[i] ));
}
if ( error )
goto Bail;
for ( i = 0; i < GLYPHPADOPTIONS; i++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
(void)FT_READ_LONG( bitmapSizes[i] );
else
(void)FT_READ_LONG_LE( bitmapSizes[i] );
if ( error )
goto Bail;
sizebitmaps = bitmapSizes[PCF_GLYPH_PAD_INDEX( format )];
FT_TRACE4(( " padding %d implies a size of %ld\n", i, bitmapSizes[i] ));
}
FT_TRACE4(( " %d bitmaps, padding index %ld\n",
nbitmaps,
PCF_GLYPH_PAD_INDEX( format ) ));
FT_TRACE4(( " bitmap size = %d\n", sizebitmaps ));
/* only used for debugging */
FT_UNUSED( sizebitmaps );
for ( i = 0; i < nbitmaps; i++ )
{
/* rough estimate */
if ( ( offsets[i] < 0 ) ||
( (FT_ULong)offsets[i] > size ) )
{
FT_TRACE0(( "pcf_get_bitmaps:"
" invalid offset to bitmap data of glyph %d\n", i ));
}
else
face->metrics[i].bits = stream->pos + offsets[i];
}
face->bitmapsFormat = format;
Bail:
FT_FREE( offsets );
return error;
}
static FT_Error
pcf_get_encodings( FT_Stream stream,
PCF_Face face )
{
FT_Error error = PCF_Err_Ok;
FT_Memory memory = FT_FACE(face)->memory;
FT_ULong format, size;
int firstCol, lastCol;
int firstRow, lastRow;
int nencoding, encodingOffset;
int i, j;
PCF_Encoding tmpEncoding = NULL, encoding = 0;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
PCF_BDF_ENCODINGS,
&format,
&size );
if ( error )
return error;
error = FT_Stream_EnterFrame( stream, 14 );
if ( error )
return error;
format = FT_GET_ULONG_LE();
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
{
firstCol = FT_GET_SHORT();
lastCol = FT_GET_SHORT();
firstRow = FT_GET_SHORT();
lastRow = FT_GET_SHORT();
face->defaultChar = FT_GET_SHORT();
}
else
{
firstCol = FT_GET_SHORT_LE();
lastCol = FT_GET_SHORT_LE();
firstRow = FT_GET_SHORT_LE();
lastRow = FT_GET_SHORT_LE();
face->defaultChar = FT_GET_SHORT_LE();
}
FT_Stream_ExitFrame( stream );
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) )
return PCF_Err_Invalid_File_Format;
FT_TRACE4(( "pdf_get_encodings:\n" ));
FT_TRACE4(( " firstCol %d, lastCol %d, firstRow %d, lastRow %d\n",
firstCol, lastCol, firstRow, lastRow ));
nencoding = ( lastCol - firstCol + 1 ) * ( lastRow - firstRow + 1 );
if ( FT_NEW_ARRAY( tmpEncoding, nencoding ) )
return PCF_Err_Out_Of_Memory;
error = FT_Stream_EnterFrame( stream, 2 * nencoding );
if ( error )
goto Bail;
for ( i = 0, j = 0 ; i < nencoding; i++ )
{
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
encodingOffset = FT_GET_SHORT();
else
encodingOffset = FT_GET_SHORT_LE();
if ( encodingOffset != -1 )
{
tmpEncoding[j].enc = ( ( ( i / ( lastCol - firstCol + 1 ) ) +
firstRow ) * 256 ) +
( ( i % ( lastCol - firstCol + 1 ) ) +
firstCol );
tmpEncoding[j].glyph = (FT_Short)encodingOffset;
FT_TRACE5(( " code %d (0x%04X): idx %d\n",
tmpEncoding[j].enc, tmpEncoding[j].enc,
tmpEncoding[j].glyph ));
j++;
}
}
FT_Stream_ExitFrame( stream );
if ( FT_NEW_ARRAY( encoding, j ) )
goto Bail;
for ( i = 0; i < j; i++ )
{
encoding[i].enc = tmpEncoding[i].enc;
encoding[i].glyph = tmpEncoding[i].glyph;
}
face->nencodings = j;
face->encodings = encoding;
FT_FREE( tmpEncoding );
return error;
Bail:
FT_FREE( encoding );
FT_FREE( tmpEncoding );
return error;
}
static
const FT_Frame_Field pcf_accel_header[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PCF_AccelRec
FT_FRAME_START( 20 ),
FT_FRAME_BYTE ( noOverlap ),
FT_FRAME_BYTE ( constantMetrics ),
FT_FRAME_BYTE ( terminalFont ),
FT_FRAME_BYTE ( constantWidth ),
FT_FRAME_BYTE ( inkInside ),
FT_FRAME_BYTE ( inkMetrics ),
FT_FRAME_BYTE ( drawDirection ),
FT_FRAME_SKIP_BYTES( 1 ),
FT_FRAME_LONG_LE ( fontAscent ),
FT_FRAME_LONG_LE ( fontDescent ),
FT_FRAME_LONG_LE ( maxOverlap ),
FT_FRAME_END
};
static
const FT_Frame_Field pcf_accel_msb_header[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PCF_AccelRec
FT_FRAME_START( 20 ),
FT_FRAME_BYTE ( noOverlap ),
FT_FRAME_BYTE ( constantMetrics ),
FT_FRAME_BYTE ( terminalFont ),
FT_FRAME_BYTE ( constantWidth ),
FT_FRAME_BYTE ( inkInside ),
FT_FRAME_BYTE ( inkMetrics ),
FT_FRAME_BYTE ( drawDirection ),
FT_FRAME_SKIP_BYTES( 1 ),
FT_FRAME_LONG ( fontAscent ),
FT_FRAME_LONG ( fontDescent ),
FT_FRAME_LONG ( maxOverlap ),
FT_FRAME_END
};
static FT_Error
pcf_get_accel( FT_Stream stream,
PCF_Face face,
FT_ULong type )
{
FT_ULong format, size;
FT_Error error = PCF_Err_Ok;
PCF_Accel accel = &face->accel;
error = pcf_seek_to_table_type( stream,
face->toc.tables,
face->toc.count,
type,
&format,
&size );
if ( error )
goto Bail;
if ( FT_READ_ULONG_LE( format ) )
goto Bail;
if ( !PCF_FORMAT_MATCH( format, PCF_DEFAULT_FORMAT ) &&
!PCF_FORMAT_MATCH( format, PCF_ACCEL_W_INKBOUNDS ) )
goto Bail;
if ( PCF_BYTE_ORDER( format ) == MSBFirst )
{
if ( FT_STREAM_READ_FIELDS( pcf_accel_msb_header, accel ) )
goto Bail;
}
else
{
if ( FT_STREAM_READ_FIELDS( pcf_accel_header, accel ) )
goto Bail;
}
error = pcf_get_metric( stream,
format & ( ~PCF_FORMAT_MASK ),
&(accel->minbounds) );
if ( error )
goto Bail;
error = pcf_get_metric( stream,
format & ( ~PCF_FORMAT_MASK ),
&(accel->maxbounds) );
if ( error )
goto Bail;
if ( PCF_FORMAT_MATCH( format, PCF_ACCEL_W_INKBOUNDS ) )
{
error = pcf_get_metric( stream,
format & ( ~PCF_FORMAT_MASK ),
&(accel->ink_minbounds) );
if ( error )
goto Bail;
error = pcf_get_metric( stream,
format & ( ~PCF_FORMAT_MASK ),
&(accel->ink_maxbounds) );
if ( error )
goto Bail;
}
else
{
/* I'm not sure about this */
accel->ink_minbounds = accel->minbounds;
accel->ink_maxbounds = accel->maxbounds;
}
Bail:
return error;
}
static FT_Error
pcf_interpret_style( PCF_Face pcf )
{
FT_Error error = PCF_Err_Ok;
FT_Face face = FT_FACE( pcf );
FT_Memory memory = face->memory;
PCF_Property prop;
size_t nn, len;
char* strings[4] = { NULL, NULL, NULL, NULL };
size_t lengths[4];
face->style_flags = 0;
prop = pcf_find_property( pcf, "SLANT" );
if ( prop && prop->isString &&
( *(prop->value.atom) == 'O' || *(prop->value.atom) == 'o' ||
*(prop->value.atom) == 'I' || *(prop->value.atom) == 'i' ) )
{
face->style_flags |= FT_STYLE_FLAG_ITALIC;
strings[2] = ( *(prop->value.atom) == 'O' ||
*(prop->value.atom) == 'o' ) ? (char *)"Oblique"
: (char *)"Italic";
}
prop = pcf_find_property( pcf, "WEIGHT_NAME" );
if ( prop && prop->isString &&
( *(prop->value.atom) == 'B' || *(prop->value.atom) == 'b' ) )
{
face->style_flags |= FT_STYLE_FLAG_BOLD;
strings[1] = (char *)"Bold";
}
prop = pcf_find_property( pcf, "SETWIDTH_NAME" );
if ( prop && prop->isString &&
*(prop->value.atom) &&
!( *(prop->value.atom) == 'N' || *(prop->value.atom) == 'n' ) )
strings[3] = (char *)(prop->value.atom);
prop = pcf_find_property( pcf, "ADD_STYLE_NAME" );
if ( prop && prop->isString &&
*(prop->value.atom) &&
!( *(prop->value.atom) == 'N' || *(prop->value.atom) == 'n' ) )
strings[0] = (char *)(prop->value.atom);
for ( len = 0, nn = 0; nn < 4; nn++ )
{
lengths[nn] = 0;
if ( strings[nn] )
{
lengths[nn] = ft_strlen( strings[nn] );
len += lengths[nn] + 1;
}
}
if ( len == 0 )
{
strings[0] = (char *)"Regular";
lengths[0] = ft_strlen( strings[0] );
len = lengths[0] + 1;
}
{
char* s;
if ( FT_ALLOC( face->style_name, len ) )
return error;
s = face->style_name;
for ( nn = 0; nn < 4; nn++ )
{
char* src = strings[nn];
len = lengths[nn];
if ( src == NULL )
continue;
/* separate elements with a space */
if ( s != face->style_name )
*s++ = ' ';
ft_memcpy( s, src, len );
/* need to convert spaces to dashes for */
/* add_style_name and setwidth_name */
if ( nn == 0 || nn == 3 )
{
size_t mm;
for ( mm = 0; mm < len; mm++ )
if (s[mm] == ' ')
s[mm] = '-';
}
s += len;
}
*s = 0;
}
return error;
}
FT_LOCAL_DEF( FT_Error )
pcf_load_font( FT_Stream stream,
PCF_Face face )
{
FT_Error error = PCF_Err_Ok;
FT_Memory memory = FT_FACE(face)->memory;
FT_Bool hasBDFAccelerators;
error = pcf_read_TOC( stream, face );
if ( error )
goto Exit;
error = pcf_get_properties( stream, face );
if ( error )
goto Exit;
/* Use the old accelerators if no BDF accelerators are in the file. */
hasBDFAccelerators = pcf_has_table_type( face->toc.tables,
face->toc.count,
PCF_BDF_ACCELERATORS );
if ( !hasBDFAccelerators )
{
error = pcf_get_accel( stream, face, PCF_ACCELERATORS );
if ( error )
goto Exit;
}
/* metrics */
error = pcf_get_metrics( stream, face );
if ( error )
goto Exit;
/* bitmaps */
error = pcf_get_bitmaps( stream, face );
if ( error )
goto Exit;
/* encodings */
error = pcf_get_encodings( stream, face );
if ( error )
goto Exit;
/* BDF style accelerators (i.e. bounds based on encoded glyphs) */
if ( hasBDFAccelerators )
{
error = pcf_get_accel( stream, face, PCF_BDF_ACCELERATORS );
if ( error )
goto Exit;
}
/* XXX: TO DO: inkmetrics and glyph_names are missing */
/* now construct the face object */
{
FT_Face root = FT_FACE( face );
PCF_Property prop;
root->num_faces = 1;
root->face_index = 0;
root->face_flags = FT_FACE_FLAG_FIXED_SIZES |
FT_FACE_FLAG_HORIZONTAL |
FT_FACE_FLAG_FAST_GLYPHS;
if ( face->accel.constantWidth )
root->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;
if ( ( error = pcf_interpret_style( face ) ) != 0 )
goto Exit;
prop = pcf_find_property( face, "FAMILY_NAME" );
if ( prop && prop->isString )
{
if ( FT_STRDUP( root->family_name, prop->value.atom ) )
goto Exit;
}
else
root->family_name = NULL;
/*
* Note: We shift all glyph indices by +1 since we must
* respect the convention that glyph 0 always corresponds
* to the `missing glyph'.
*
* This implies bumping the number of `available' glyphs by 1.
*/
root->num_glyphs = face->nmetrics + 1;
root->num_fixed_sizes = 1;
if ( FT_NEW_ARRAY( root->available_sizes, 1 ) )
goto Exit;
{
FT_Bitmap_Size* bsize = root->available_sizes;
FT_Short resolution_x = 0, resolution_y = 0;
FT_MEM_ZERO( bsize, sizeof ( FT_Bitmap_Size ) );
#if 0
bsize->height = face->accel.maxbounds.ascent << 6;
#endif
bsize->height = (FT_Short)( face->accel.fontAscent +
face->accel.fontDescent );
prop = pcf_find_property( face, "AVERAGE_WIDTH" );
if ( prop )
bsize->width = (FT_Short)( ( prop->value.l + 5 ) / 10 );
else
bsize->width = (FT_Short)( bsize->height * 2/3 );
prop = pcf_find_property( face, "POINT_SIZE" );
if ( prop )
/* convert from 722.7 decipoints to 72 points per inch */
bsize->size =
(FT_Pos)( ( prop->value.l * 64 * 7200 + 36135L ) / 72270L );
prop = pcf_find_property( face, "PIXEL_SIZE" );
if ( prop )
bsize->y_ppem = (FT_Short)prop->value.l << 6;
prop = pcf_find_property( face, "RESOLUTION_X" );
if ( prop )
resolution_x = (FT_Short)prop->value.l;
prop = pcf_find_property( face, "RESOLUTION_Y" );
if ( prop )
resolution_y = (FT_Short)prop->value.l;
if ( bsize->y_ppem == 0 )
{
bsize->y_ppem = bsize->size;
if ( resolution_y )
bsize->y_ppem = bsize->y_ppem * resolution_y / 72;
}
if ( resolution_x && resolution_y )
bsize->x_ppem = bsize->y_ppem * resolution_x / resolution_y;
else
bsize->x_ppem = bsize->y_ppem;
}
/* set up charset */
{
PCF_Property charset_registry = 0, charset_encoding = 0;
charset_registry = pcf_find_property( face, "CHARSET_REGISTRY" );
charset_encoding = pcf_find_property( face, "CHARSET_ENCODING" );
if ( charset_registry && charset_registry->isString &&
charset_encoding && charset_encoding->isString )
{
if ( FT_STRDUP( face->charset_encoding,
charset_encoding->value.atom ) ||
FT_STRDUP( face->charset_registry,
charset_registry->value.atom ) )
goto Exit;
}
}
}
Exit:
if ( error )
{
/* This is done to respect the behaviour of the original */
/* PCF font driver. */
error = PCF_Err_Invalid_File_Format;
}
return error;
}
/* END */
/* pcfdrivr.c
FreeType font driver for pcf files
Copyright (C) 2000-2004, 2006-2011 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
/***************************************************************************/
/* */
/* ftgzip.h */
/* */
/* Gzip-compressed stream support. */
/* */
/* Copyright 2002, 2003, 2004, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTGZIP_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* gzip */
/* */
/* <Title> */
/* GZIP Streams */
/* */
/* <Abstract> */
/* Using gzip-compressed font files. */
/* */
/* <Description> */
/* This section contains the declaration of Gzip-specific functions. */
/* */
/*************************************************************************/
/************************************************************************
*
* @function:
* FT_Stream_OpenGzip
*
* @description:
* Open a new stream to parse gzip-compressed font files. This is
* mainly used to support the compressed `*.pcf.gz' fonts that come
* with XFree86.
*
* @input:
* stream ::
* The target embedding stream.
*
* source ::
* The source stream.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* The source stream must be opened _before_ calling this function.
*
* Calling the internal function `FT_Stream_Close' on the new stream will
* *not* call `FT_Stream_Close' on the source stream. None of the stream
* objects will be released to the heap.
*
* The stream implementation is very basic and resets the decompression
* process each time seeking backwards is needed within the stream.
*
* In certain builds of the library, gzip compression recognition is
* automatically handled when calling @FT_New_Face or @FT_Open_Face.
* This means that if no font driver is capable of handling the raw
* compressed file, the library will try to open a gzipped stream from
* it and re-open the face with it.
*
* This function may return `FT_Err_Unimplemented_Feature' if your build
* of FreeType was not compiled with zlib support.
*/
FT_EXPORT( FT_Error )
FT_Stream_OpenGzip( FT_Stream stream,
FT_Stream source );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftlzw.h */
/* */
/* LZW-compressed stream support. */
/* */
/* Copyright 2004, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTLZW_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* lzw */
/* */
/* <Title> */
/* LZW Streams */
/* */
/* <Abstract> */
/* Using LZW-compressed font files. */
/* */
/* <Description> */
/* This section contains the declaration of LZW-specific functions. */
/* */
/*************************************************************************/
/************************************************************************
*
* @function:
* FT_Stream_OpenLZW
*
* @description:
* Open a new stream to parse LZW-compressed font files. This is
* mainly used to support the compressed `*.pcf.Z' fonts that come
* with XFree86.
*
* @input:
* stream :: The target embedding stream.
*
* source :: The source stream.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* The source stream must be opened _before_ calling this function.
*
* Calling the internal function `FT_Stream_Close' on the new stream will
* *not* call `FT_Stream_Close' on the source stream. None of the stream
* objects will be released to the heap.
*
* The stream implementation is very basic and resets the decompression
* process each time seeking backwards is needed within the stream
*
* In certain builds of the library, LZW compression recognition is
* automatically handled when calling @FT_New_Face or @FT_Open_Face.
* This means that if no font driver is capable of handling the raw
* compressed file, the library will try to open a LZW stream from it
* and re-open the face with it.
*
* This function may return `FT_Err_Unimplemented_Feature' if your build
* of FreeType was not compiled with LZW support.
*/
FT_EXPORT( FT_Error )
FT_Stream_OpenLZW( FT_Stream stream,
FT_Stream source );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftbzip2.h */
/* */
/* Bzip2-compressed stream support. */
/* */
/* Copyright 2010 by */
/* Joel Klinghed. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTBZIP2_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Section> */
/* bzip2 */
/* */
/* <Title> */
/* BZIP2 Streams */
/* */
/* <Abstract> */
/* Using bzip2-compressed font files. */
/* */
/* <Description> */
/* This section contains the declaration of Bzip2-specific functions. */
/* */
/*************************************************************************/
/************************************************************************
*
* @function:
* FT_Stream_OpenBzip2
*
* @description:
* Open a new stream to parse bzip2-compressed font files. This is
* mainly used to support the compressed `*.pcf.bz2' fonts that come
* with XFree86.
*
* @input:
* stream ::
* The target embedding stream.
*
* source ::
* The source stream.
*
* @return:
* FreeType error code. 0~means success.
*
* @note:
* The source stream must be opened _before_ calling this function.
*
* Calling the internal function `FT_Stream_Close' on the new stream will
* *not* call `FT_Stream_Close' on the source stream. None of the stream
* objects will be released to the heap.
*
* The stream implementation is very basic and resets the decompression
* process each time seeking backwards is needed within the stream.
*
* In certain builds of the library, bzip2 compression recognition is
* automatically handled when calling @FT_New_Face or @FT_Open_Face.
* This means that if no font driver is capable of handling the raw
* compressed file, the library will try to open a bzip2 compressed stream
* from it and re-open the face with it.
*
* This function may return `FT_Err_Unimplemented_Feature' if your build
* of FreeType was not compiled with bzip2 support.
*/
FT_EXPORT( FT_Error )
FT_Stream_OpenBzip2( FT_Stream stream,
FT_Stream source );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* pcfdrivr.h
FreeType font driver for pcf fonts
Copyright 2000-2001, 2002 by
Francesco Zappa Nardelli
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*/
#define __PCFDRIVR_H__
FT_BEGIN_HEADER
FT_EXPORT_VAR( const FT_Driver_ClassRec ) pcf_driver_class;
FT_END_HEADER
/* END */
#undef FT_COMPONENT
#define FT_COMPONENT trace_pcfread
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_pcfdriver
typedef struct PCF_CMapRec_
{
FT_CMapRec root;
FT_UInt num_encodings;
PCF_Encoding encodings;
} PCF_CMapRec, *PCF_CMap;
FT_CALLBACK_DEF( FT_Error )
/* PCF_CMap */
pcf_cmap_init( FT_CMap pcfcmap,
FT_Pointer init_data )
{
PCF_CMap cmap = (PCF_CMap)pcfcmap;
PCF_Face face = (PCF_Face)FT_CMAP_FACE( pcfcmap );
FT_UNUSED( init_data );
cmap->num_encodings = (FT_UInt)face->nencodings;
cmap->encodings = face->encodings;
return PCF_Err_Ok;
}
FT_CALLBACK_DEF( void )
/* PCF_CMap */
pcf_cmap_done( FT_CMap pcfcmap )
{
PCF_CMap cmap = (PCF_CMap)pcfcmap;
cmap->encodings = NULL;
cmap->num_encodings = 0;
}
FT_CALLBACK_DEF( FT_UInt )
/* PCF_CMap */
pcf_cmap_char_index( FT_CMap pcfcmap,
FT_UInt32 charcode )
{
PCF_CMap cmap = (PCF_CMap)pcfcmap;
PCF_Encoding encodings = cmap->encodings;
FT_UInt min, max, mid;
FT_UInt result = 0;
min = 0;
max = cmap->num_encodings;
while ( min < max )
{
FT_ULong code;
mid = ( min + max ) >> 1;
code = encodings[mid].enc;
if ( charcode == code )
{
result = encodings[mid].glyph + 1;
break;
}
if ( charcode < code )
max = mid;
else
min = mid + 1;
}
return result;
}
FT_CALLBACK_DEF( FT_UInt )
/* PCF_CMap */
pcf_cmap_char_next( FT_CMap pcfcmap,
FT_UInt32 *acharcode )
{
PCF_CMap cmap = (PCF_CMap)pcfcmap;
PCF_Encoding encodings = cmap->encodings;
FT_UInt min, max, mid;
FT_ULong charcode = *acharcode + 1;
FT_UInt result = 0;
min = 0;
max = cmap->num_encodings;
while ( min < max )
{
FT_ULong code;
mid = ( min + max ) >> 1;
code = encodings[mid].enc;
if ( charcode == code )
{
result = encodings[mid].glyph + 1;
goto Exit;
}
if ( charcode < code )
max = mid;
else
min = mid + 1;
}
charcode = 0;
if ( min < cmap->num_encodings )
{
charcode = encodings[min].enc;
result = encodings[min].glyph + 1;
}
Exit:
if ( charcode > 0xFFFFFFFFUL )
{
FT_TRACE1(( "pcf_cmap_char_next: charcode 0x%x > 32bit API" ));
*acharcode = 0;
/* XXX: result should be changed to indicate an overflow error */
}
else
*acharcode = (FT_UInt32)charcode;
return result;
}
FT_CALLBACK_TABLE_DEF
const FT_CMap_ClassRec pcf_cmap_class =
{
sizeof ( PCF_CMapRec ),
pcf_cmap_init,
pcf_cmap_done,
pcf_cmap_char_index,
pcf_cmap_char_next,
NULL, NULL, NULL, NULL, NULL
};
FT_CALLBACK_DEF( void )
/* PCF_Face */
PCF_Face_Done( FT_Face pcfface )
{
PCF_Face face = (PCF_Face)pcfface;
FT_Memory memory;
if ( !face )
return;
memory = FT_FACE_MEMORY( face );
FT_FREE( face->encodings );
FT_FREE( face->metrics );
/* free properties */
{
PCF_Property prop;
FT_Int i;
if ( face->properties )
{
for ( i = 0; i < face->nprops; i++ )
{
prop = &face->properties[i];
if ( prop )
{
FT_FREE( prop->name );
if ( prop->isString )
FT_FREE( prop->value.atom );
}
}
}
FT_FREE( face->properties );
}
FT_FREE( face->toc.tables );
FT_FREE( pcfface->family_name );
FT_FREE( pcfface->style_name );
FT_FREE( pcfface->available_sizes );
FT_FREE( face->charset_encoding );
FT_FREE( face->charset_registry );
/* close compressed stream if any */
if ( pcfface->stream == &face->comp_stream )
{
FT_Stream_Close( &face->comp_stream );
pcfface->stream = face->comp_source;
}
}
FT_CALLBACK_DEF( FT_Error )
PCF_Face_Init( FT_Stream stream,
/* PCF_Face */
FT_Face pcfface,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
PCF_Face face = (PCF_Face)pcfface;
FT_Error error = PCF_Err_Ok;
FT_UNUSED( num_params );
FT_UNUSED( params );
FT_UNUSED( face_index );
FT_TRACE2(( "PCF driver\n" ));
error = pcf_load_font( stream, face );
if ( error )
{
PCF_Face_Done( pcfface );
#if defined( FT_CONFIG_OPTION_USE_ZLIB ) || \
defined( FT_CONFIG_OPTION_USE_LZW ) || \
defined( FT_CONFIG_OPTION_USE_BZIP2 )
if ( error )
goto Fail;
face->comp_source = stream;
pcfface->stream = &face->comp_stream;
stream = pcfface->stream;
error = pcf_load_font( stream, face );
if ( error )
goto Fail;
/* !(FT_CONFIG_OPTION_USE_ZLIB ||
FT_CONFIG_OPTION_USE_LZW ||
FT_CONFIG_OPTION_USE_BZIP2) */
#else
goto Fail;
#endif
}
/* set up charmap */
{
FT_String *charset_registry = face->charset_registry;
FT_String *charset_encoding = face->charset_encoding;
FT_Bool unicode_charmap = 0;
if ( charset_registry && charset_encoding )
{
char* s = charset_registry;
/* Uh, oh, compare first letters manually to avoid dependency
on locales. */
if ( ( s[0] == 'i' || s[0] == 'I' ) &&
( s[1] == 's' || s[1] == 'S' ) &&
( s[2] == 'o' || s[2] == 'O' ) )
{
s += 3;
if ( !ft_strcmp( s, "10646" ) ||
( !ft_strcmp( s, "8859" ) &&
!ft_strcmp( face->charset_encoding, "1" ) ) )
unicode_charmap = 1;
}
}
{
FT_CharMapRec charmap;
charmap.face = FT_FACE( face );
charmap.encoding = FT_ENCODING_NONE;
/* initial platform/encoding should indicate unset status? */
charmap.platform_id = TT_PLATFORM_APPLE_UNICODE;
charmap.encoding_id = TT_APPLE_ID_DEFAULT;
if ( unicode_charmap )
{
charmap.encoding = FT_ENCODING_UNICODE;
charmap.platform_id = TT_PLATFORM_MICROSOFT;
charmap.encoding_id = TT_MS_ID_UNICODE_CS;
}
error = FT_CMap_New( &pcf_cmap_class, NULL, &charmap, NULL );
#if 0
/* Select default charmap */
if ( pcfface->num_charmaps )
pcfface->charmap = pcfface->charmaps[0];
#endif
}
}
Exit:
return error;
Fail:
FT_TRACE2(( " not a PCF file\n" ));
PCF_Face_Done( pcfface );
/* error */
error = PCF_Err_Unknown_File_Format;
goto Exit;
}
FT_CALLBACK_DEF( FT_Error )
PCF_Size_Select( FT_Size size,
FT_ULong strike_index )
{
PCF_Accel accel = &( (PCF_Face)size->face )->accel;
FT_Select_Metrics( size->face, strike_index );
size->metrics.ascender = accel->fontAscent << 6;
size->metrics.descender = -accel->fontDescent << 6;
size->metrics.max_advance = accel->maxbounds.characterWidth << 6;
return PCF_Err_Ok;
}
FT_CALLBACK_DEF( FT_Error )
PCF_Size_Request( FT_Size size,
FT_Size_Request req )
{
PCF_Face face = (PCF_Face)size->face;
FT_Bitmap_Size* bsize = size->face->available_sizes;
FT_Error error = PCF_Err_Invalid_Pixel_Size;
FT_Long height;
height = FT_REQUEST_HEIGHT( req );
height = ( height + 32 ) >> 6;
switch ( req->type )
{
case FT_SIZE_REQUEST_TYPE_NOMINAL:
if ( height == ( ( bsize->y_ppem + 32 ) >> 6 ) )
error = PCF_Err_Ok;
break;
case FT_SIZE_REQUEST_TYPE_REAL_DIM:
if ( height == ( face->accel.fontAscent +
face->accel.fontDescent ) )
error = PCF_Err_Ok;
break;
default:
error = PCF_Err_Unimplemented_Feature;
break;
}
if ( error )
return error;
else
return PCF_Size_Select( size, 0 );
}
FT_CALLBACK_DEF( FT_Error )
PCF_Glyph_Load( FT_GlyphSlot slot,
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
PCF_Face face = (PCF_Face)FT_SIZE_FACE( size );
FT_Stream stream;
FT_Error error = PCF_Err_Ok;
FT_Bitmap* bitmap = &slot->bitmap;
PCF_Metric metric;
FT_Offset bytes;
FT_UNUSED( load_flags );
FT_TRACE4(( "load_glyph %d ---", glyph_index ));
if ( !face || glyph_index >= (FT_UInt)face->root.num_glyphs )
{
error = PCF_Err_Invalid_Argument;
goto Exit;
}
stream = face->root.stream;
if ( glyph_index > 0 )
glyph_index--;
metric = face->metrics + glyph_index;
bitmap->rows = metric->ascent + metric->descent;
bitmap->width = metric->rightSideBearing - metric->leftSideBearing;
bitmap->num_grays = 1;
bitmap->pixel_mode = FT_PIXEL_MODE_MONO;
FT_TRACE6(( "BIT_ORDER %d ; BYTE_ORDER %d ; GLYPH_PAD %d\n",
PCF_BIT_ORDER( face->bitmapsFormat ),
PCF_BYTE_ORDER( face->bitmapsFormat ),
PCF_GLYPH_PAD( face->bitmapsFormat ) ));
switch ( PCF_GLYPH_PAD( face->bitmapsFormat ) )
{
case 1:
bitmap->pitch = ( bitmap->width + 7 ) >> 3;
break;
case 2:
bitmap->pitch = ( ( bitmap->width + 15 ) >> 4 ) << 1;
break;
case 4:
bitmap->pitch = ( ( bitmap->width + 31 ) >> 5 ) << 2;
break;
case 8:
bitmap->pitch = ( ( bitmap->width + 63 ) >> 6 ) << 3;
break;
default:
return PCF_Err_Invalid_File_Format;
}
/* XXX: to do: are there cases that need repadding the bitmap? */
bytes = bitmap->pitch * bitmap->rows;
error = ft_glyphslot_alloc_bitmap( slot, bytes );
if ( error )
goto Exit;
if ( FT_STREAM_SEEK( metric->bits ) ||
FT_STREAM_READ( bitmap->buffer, bytes ) )
goto Exit;
if ( PCF_BIT_ORDER( face->bitmapsFormat ) != MSBFirst )
BitOrderInvert( bitmap->buffer, bytes );
if ( ( PCF_BYTE_ORDER( face->bitmapsFormat ) !=
PCF_BIT_ORDER( face->bitmapsFormat ) ) )
{
switch ( PCF_SCAN_UNIT( face->bitmapsFormat ) )
{
case 1:
break;
case 2:
TwoByteSwap( bitmap->buffer, bytes );
break;
case 4:
FourByteSwap( bitmap->buffer, bytes );
break;
}
}
slot->format = FT_GLYPH_FORMAT_BITMAP;
slot->bitmap_left = metric->leftSideBearing;
slot->bitmap_top = metric->ascent;
slot->metrics.horiAdvance = metric->characterWidth << 6;
slot->metrics.horiBearingX = metric->leftSideBearing << 6;
slot->metrics.horiBearingY = metric->ascent << 6;
slot->metrics.width = ( metric->rightSideBearing -
metric->leftSideBearing ) << 6;
slot->metrics.height = bitmap->rows << 6;
ft_synthesize_vertical_metrics( &slot->metrics,
( face->accel.fontAscent +
face->accel.fontDescent ) << 6 );
FT_TRACE4(( " --- ok\n" ));
Exit:
return error;
}
/*
*
* BDF SERVICE
*
*/
static FT_Error
pcf_get_bdf_property( PCF_Face face,
const char* prop_name,
BDF_PropertyRec *aproperty )
{
PCF_Property prop;
prop = pcf_find_property( face, prop_name );
if ( prop != NULL )
{
if ( prop->isString )
{
aproperty->type = BDF_PROPERTY_TYPE_ATOM;
aproperty->u.atom = prop->value.atom;
}
else
{
if ( prop->value.l > 0x7FFFFFFFL || prop->value.l < ( -1 - 0x7FFFFFFFL ) )
{
FT_TRACE1(( "pcf_get_bdf_property: " ));
FT_TRACE1(( "too large integer 0x%x is truncated\n" ));
}
/* Apparently, the PCF driver loads all properties as signed integers!
* This really doesn't seem to be a problem, because this is
* sufficient for any meaningful values.
*/
aproperty->type = BDF_PROPERTY_TYPE_INTEGER;
aproperty->u.integer = (FT_Int32)prop->value.l;
}
return 0;
}
return PCF_Err_Invalid_Argument;
}
static FT_Error
pcf_get_charset_id( PCF_Face face,
const char* *acharset_encoding,
const char* *acharset_registry )
{
*acharset_encoding = face->charset_encoding;
*acharset_registry = face->charset_registry;
return 0;
}
static const FT_Service_BDFRec pcf_service_bdf =
{
(FT_BDF_GetCharsetIdFunc)pcf_get_charset_id,
(FT_BDF_GetPropertyFunc) pcf_get_bdf_property
};
/*
*
* SERVICE LIST
*
*/
static const FT_ServiceDescRec pcf_services[] =
{
{ FT_SERVICE_ID_BDF, &pcf_service_bdf },
{ FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_PCF },
{ NULL, NULL }
};
FT_CALLBACK_DEF( FT_Module_Interface )
pcf_driver_requester( FT_Module module,
const char* name )
{
FT_UNUSED( module );
return ft_service_list_lookup( pcf_services, name );
}
FT_CALLBACK_TABLE_DEF
const FT_Driver_ClassRec pcf_driver_class =
{
{
FT_MODULE_FONT_DRIVER |
FT_MODULE_DRIVER_NO_OUTLINES,
sizeof ( FT_DriverRec ),
"pcf",
0x10000L,
0x20000L,
0,
/* FT_Module_Constructor */
0,
/* FT_Module_Destructor */
0,
pcf_driver_requester
},
sizeof ( PCF_FaceRec ),
sizeof ( FT_SizeRec ),
sizeof ( FT_GlyphSlotRec ),
PCF_Face_Init,
PCF_Face_Done,
/* FT_Size_InitFunc */
0,
/* FT_Size_DoneFunc */
0,
/* FT_Slot_InitFunc */
0,
/* FT_Slot_DoneFunc */
0,
PCF_Glyph_Load,
/* FT_Face_GetKerningFunc */
0,
/* FT_Face_AttachFunc */
0,
/* FT_Face_GetAdvancesFunc */
0,
PCF_Size_Request,
PCF_Size_Select
};
/* END */
/* END */
/***************************************************************************/
/* */
/* pfr.c */
/* */
/* FreeType PFR driver component. */
/* */
/* Copyright 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* pfrload.c */
/* */
/* FreeType PFR loader (body). */
/* */
/* Copyright 2002, 2003, 2004, 2005, 2007, 2009, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* pfrload.h */
/* */
/* FreeType PFR loader (specification). */
/* */
/* Copyright 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PFRLOAD_H__
/***************************************************************************/
/* */
/* pfrobjs.h */
/* */
/* FreeType PFR object methods (specification). */
/* */
/* Copyright 2002, 2003, 2004 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PFROBJS_H__
/***************************************************************************/
/* */
/* pfrtypes.h */
/* */
/* FreeType PFR data structures (specification only). */
/* */
/* Copyright 2002, 2003, 2005, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PFRTYPES_H__
FT_BEGIN_HEADER
/************************************************************************/
/* the PFR Header structure */
typedef struct PFR_HeaderRec_
{
FT_UInt32 signature;
FT_UInt version;
FT_UInt signature2;
FT_UInt header_size;
FT_UInt log_dir_size;
FT_UInt log_dir_offset;
FT_UInt log_font_max_size;
FT_UInt32 log_font_section_size;
FT_UInt32 log_font_section_offset;
FT_UInt32 phy_font_max_size;
FT_UInt32 phy_font_section_size;
FT_UInt32 phy_font_section_offset;
FT_UInt gps_max_size;
FT_UInt32 gps_section_size;
FT_UInt32 gps_section_offset;
FT_UInt max_blue_values;
FT_UInt max_x_orus;
FT_UInt max_y_orus;
FT_UInt phy_font_max_size_high;
FT_UInt color_flags;
FT_UInt32 bct_max_size;
FT_UInt32 bct_set_max_size;
FT_UInt32 phy_bct_set_max_size;
FT_UInt num_phy_fonts;
FT_UInt max_vert_stem_snap;
FT_UInt max_horz_stem_snap;
FT_UInt max_chars;
} PFR_HeaderRec, *PFR_Header;
/* used in `color_flags' field of the PFR_Header */
typedef enum PFR_HeaderFlags_
{
PFR_FLAG_BLACK_PIXEL = 1,
PFR_FLAG_INVERT_BITMAP = 2
} PFR_HeaderFlags;
/************************************************************************/
typedef struct PFR_LogFontRec_
{
FT_UInt32 size;
FT_UInt32 offset;
FT_Int32 matrix[4];
FT_UInt stroke_flags;
FT_Int stroke_thickness;
FT_Int bold_thickness;
FT_Int32 miter_limit;
FT_UInt32 phys_size;
FT_UInt32 phys_offset;
} PFR_LogFontRec, *PFR_LogFont;
typedef enum PFR_LogFlags_
{
PFR_LOG_EXTRA_ITEMS = 0x40,
PFR_LOG_2BYTE_BOLD = 0x20,
PFR_LOG_BOLD = 0x10,
PFR_LOG_2BYTE_STROKE = 8,
PFR_LOG_STROKE = 4,
PFR_LINE_JOIN_MASK = 3
} PFR_LogFlags;
typedef enum PFR_LineJoinFlags_
{
PFR_LINE_JOIN_MITER = 0,
PFR_LINE_JOIN_ROUND = 1,
PFR_LINE_JOIN_BEVEL = 2
} PFR_LineJoinFlags;
/************************************************************************/
typedef enum PFR_BitmapFlags_
{
PFR_BITMAP_3BYTE_OFFSET = 4,
PFR_BITMAP_2BYTE_SIZE = 2,
PFR_BITMAP_2BYTE_CHARCODE = 1
} PFR_BitmapFlags;
typedef struct PFR_BitmapCharRec_
{
FT_UInt char_code;
FT_UInt gps_size;
FT_UInt32 gps_offset;
} PFR_BitmapCharRec, *PFR_BitmapChar;
typedef enum PFR_StrikeFlags_
{
PFR_STRIKE_2BYTE_COUNT = 0x10,
PFR_STRIKE_3BYTE_OFFSET = 0x08,
PFR_STRIKE_3BYTE_SIZE = 0x04,
PFR_STRIKE_2BYTE_YPPM = 0x02,
PFR_STRIKE_2BYTE_XPPM = 0x01
} PFR_StrikeFlags;
typedef struct PFR_StrikeRec_
{
FT_UInt x_ppm;
FT_UInt y_ppm;
FT_UInt flags;
FT_UInt32 gps_size;
FT_UInt32 gps_offset;
FT_UInt32 bct_size;
FT_UInt32 bct_offset;
/* optional */
FT_UInt num_bitmaps;
PFR_BitmapChar bitmaps;
} PFR_StrikeRec, *PFR_Strike;
/************************************************************************/
typedef struct PFR_CharRec_
{
FT_UInt char_code;
FT_Int advance;
FT_UInt gps_size;
FT_UInt32 gps_offset;
} PFR_CharRec, *PFR_Char;
/************************************************************************/
typedef struct PFR_DimensionRec_
{
FT_UInt standard;
FT_UInt num_stem_snaps;
FT_Int* stem_snaps;
} PFR_DimensionRec, *PFR_Dimension;
/************************************************************************/
typedef struct PFR_KernItemRec_* PFR_KernItem;
typedef struct PFR_KernItemRec_
{
PFR_KernItem next;
FT_Byte pair_count;
FT_Byte flags;
FT_Short base_adj;
FT_UInt pair_size;
FT_Offset offset;
FT_UInt32 pair1;
FT_UInt32 pair2;
} PFR_KernItemRec;
#define PFR_KERN_INDEX( g1, g2 ) \
( ( (FT_UInt32)(g1) << 16 ) | (FT_UInt16)(g2) )
#define PFR_KERN_PAIR_INDEX( pair ) \
PFR_KERN_INDEX( (pair)->glyph1, (pair)->glyph2 )
#define PFR_NEXT_KPAIR( p ) ( p += 2, \
( (FT_UInt32)p[-2] << 16 ) | p[-1] )
/************************************************************************/
typedef struct PFR_PhyFontRec_
{
FT_Memory memory;
FT_UInt32 offset;
FT_UInt font_ref_number;
FT_UInt outline_resolution;
FT_UInt metrics_resolution;
FT_BBox bbox;
FT_UInt flags;
FT_UInt standard_advance;
/* optional, bbox.yMax if not present */
FT_Int ascent;
/* optional, bbox.yMin if not present */
FT_Int descent;
/* optional, 0 if not present */
FT_Int leading;
PFR_DimensionRec horizontal;
PFR_DimensionRec vertical;
FT_String* font_id;
FT_String* family_name;
FT_String* style_name;
FT_UInt num_strikes;
FT_UInt max_strikes;
PFR_StrikeRec* strikes;
FT_UInt num_blue_values;
FT_Int *blue_values;
FT_UInt blue_fuzz;
FT_UInt blue_scale;
FT_UInt num_chars;
FT_Offset chars_offset;
PFR_Char chars;
FT_UInt num_kern_pairs;
PFR_KernItem kern_items;
PFR_KernItem* kern_items_tail;
/* not part of the spec, but used during load */
FT_Long bct_offset;
FT_Byte* cursor;
} PFR_PhyFontRec, *PFR_PhyFont;
typedef enum PFR_PhyFlags_
{
PFR_PHY_EXTRA_ITEMS = 0x80,
PFR_PHY_3BYTE_GPS_OFFSET = 0x20,
PFR_PHY_2BYTE_GPS_SIZE = 0x10,
PFR_PHY_ASCII_CODE = 0x08,
PFR_PHY_PROPORTIONAL = 0x04,
PFR_PHY_2BYTE_CHARCODE = 0x02,
PFR_PHY_VERTICAL = 0x01
} PFR_PhyFlags;
typedef enum PFR_KernFlags_
{
PFR_KERN_2BYTE_CHAR = 0x01,
PFR_KERN_2BYTE_ADJ = 0x02
} PFR_KernFlags;
/************************************************************************/
typedef enum PFR_GlyphFlags_
{
PFR_GLYPH_IS_COMPOUND = 0x80,
PFR_GLYPH_EXTRA_ITEMS = 0x08,
PFR_GLYPH_1BYTE_XYCOUNT = 0x04,
PFR_GLYPH_XCOUNT = 0x02,
PFR_GLYPH_YCOUNT = 0x01
} PFR_GlyphFlags;
/* controlled coordinate */
typedef struct PFR_CoordRec_
{
FT_UInt org;
FT_UInt cur;
} PFR_CoordRec, *PFR_Coord;
typedef struct PFR_SubGlyphRec_
{
FT_Fixed x_scale;
FT_Fixed y_scale;
FT_Int x_delta;
FT_Int y_delta;
FT_UInt32 gps_offset;
FT_UInt gps_size;
} PFR_SubGlyphRec, *PFR_SubGlyph;
typedef enum PFR_SubgGlyphFlags_
{
PFR_SUBGLYPH_3BYTE_OFFSET = 0x80,
PFR_SUBGLYPH_2BYTE_SIZE = 0x40,
PFR_SUBGLYPH_YSCALE = 0x20,
PFR_SUBGLYPH_XSCALE = 0x10
} PFR_SubGlyphFlags;
typedef struct PFR_GlyphRec_
{
FT_Byte format;
#if 0
FT_UInt num_x_control;
FT_UInt num_y_control;
#endif
FT_UInt max_xy_control;
FT_Pos* x_control;
FT_Pos* y_control;
FT_UInt num_subs;
FT_UInt max_subs;
PFR_SubGlyphRec* subs;
FT_GlyphLoader loader;
FT_Bool path_begun;
} PFR_GlyphRec, *PFR_Glyph;
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
typedef struct PFR_FaceRec_* PFR_Face;
typedef struct PFR_SizeRec_* PFR_Size;
typedef struct PFR_SlotRec_* PFR_Slot;
typedef struct PFR_FaceRec_
{
FT_FaceRec root;
PFR_HeaderRec header;
PFR_LogFontRec log_font;
PFR_PhyFontRec phy_font;
} PFR_FaceRec;
typedef struct PFR_SizeRec_
{
FT_SizeRec root;
} PFR_SizeRec;
typedef struct PFR_SlotRec_
{
FT_GlyphSlotRec root;
PFR_GlyphRec glyph;
} PFR_SlotRec;
FT_LOCAL( FT_Error )
pfr_face_init( FT_Stream stream,
/* PFR_Face */
FT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
FT_LOCAL( void )
/* PFR_Face */
pfr_face_done( FT_Face face );
FT_LOCAL( FT_Error )
/* PFR_Face */
pfr_face_get_kerning( FT_Face face,
FT_UInt glyph1,
FT_UInt glyph2,
FT_Vector* kerning );
FT_LOCAL( FT_Error )
/* PFR_Slot */
pfr_slot_init( FT_GlyphSlot slot );
FT_LOCAL( void )
/* PFR_Slot */
pfr_slot_done( FT_GlyphSlot slot );
FT_LOCAL( FT_Error )
/* PFR_Slot */
pfr_slot_load( FT_GlyphSlot slot,
/* PFR_Size */
FT_Size size,
FT_UInt gindex,
FT_Int32 load_flags );
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
#ifdef PFR_CONFIG_NO_CHECKS
#define PFR_CHECK( x ) do { } while ( 0 )
#else
#define PFR_CHECK( x ) do \
{ \
if ( p + (x) > limit ) \
goto Too_Short; \
} while ( 0 )
#endif
#define PFR_NEXT_BYTE( p ) FT_NEXT_BYTE( p )
#define PFR_NEXT_INT8( p ) FT_NEXT_CHAR( p )
#define PFR_NEXT_SHORT( p ) FT_NEXT_SHORT( p )
#define PFR_NEXT_USHORT( p ) FT_NEXT_USHORT( p )
#define PFR_NEXT_LONG( p ) FT_NEXT_OFF3( p )
#define PFR_NEXT_ULONG( p ) FT_NEXT_UOFF3( p )
/* handling extra items */
typedef FT_Error
(*PFR_ExtraItem_ParseFunc)( FT_Byte* p,
FT_Byte* limit,
FT_Pointer data );
typedef struct PFR_ExtraItemRec_
{
FT_UInt type;
PFR_ExtraItem_ParseFunc parser;
} PFR_ExtraItemRec;
typedef const struct PFR_ExtraItemRec_* PFR_ExtraItem;
FT_LOCAL( FT_Error )
pfr_extra_items_skip( FT_Byte* *pp,
FT_Byte* limit );
FT_LOCAL( FT_Error )
pfr_extra_items_parse( FT_Byte* *pp,
FT_Byte* limit,
PFR_ExtraItem item_list,
FT_Pointer item_data );
/* load a PFR header */
FT_LOCAL( FT_Error )
pfr_header_load( PFR_Header header,
FT_Stream stream );
/* check a PFR header */
FT_LOCAL( FT_Bool )
pfr_header_check( PFR_Header header );
/* return number of logical fonts in this file */
FT_LOCAL( FT_Error )
pfr_log_font_count( FT_Stream stream,
FT_UInt32 log_section_offset,
FT_UInt *acount );
/* load a pfr logical font entry */
FT_LOCAL( FT_Error )
pfr_log_font_load( PFR_LogFont log_font,
FT_Stream stream,
FT_UInt face_index,
FT_UInt32 section_offset,
FT_Bool size_increment );
/* load a physical font entry */
FT_LOCAL( FT_Error )
pfr_phy_font_load( PFR_PhyFont phy_font,
FT_Stream stream,
FT_UInt32 offset,
FT_UInt32 size );
/* finalize a physical font */
FT_LOCAL( void )
pfr_phy_font_done( PFR_PhyFont phy_font,
FT_Memory memory );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* pfrerror.h */
/* */
/* PFR error codes (specification only). */
/* */
/* Copyright 2002, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the PFR error enumeration constants. */
/* */
/*************************************************************************/
#define __PFRERROR_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX PFR_Err_
#define FT_ERR_BASE FT_Mod_Err_PFR
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
#undef FT_COMPONENT
#define FT_COMPONENT trace_pfr
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** EXTRA ITEMS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( FT_Error )
pfr_extra_items_skip( FT_Byte* *pp,
FT_Byte* limit )
{
return pfr_extra_items_parse( pp, limit, NULL, NULL );
}
FT_LOCAL_DEF( FT_Error )
pfr_extra_items_parse( FT_Byte* *pp,
FT_Byte* limit,
PFR_ExtraItem item_list,
FT_Pointer item_data )
{
FT_Error error = PFR_Err_Ok;
FT_Byte* p = *pp;
FT_UInt num_items, item_type, item_size;
PFR_CHECK( 1 );
num_items = PFR_NEXT_BYTE( p );
for ( ; num_items > 0; num_items-- )
{
PFR_CHECK( 2 );
item_size = PFR_NEXT_BYTE( p );
item_type = PFR_NEXT_BYTE( p );
PFR_CHECK( item_size );
if ( item_list )
{
PFR_ExtraItem extra = item_list;
for ( extra = item_list; extra->parser != NULL; extra++ )
{
if ( extra->type == item_type )
{
error = extra->parser( p, p + item_size, item_data );
if ( error ) goto Exit;
break;
}
}
}
p += item_size;
}
Exit:
*pp = p;
return error;
Too_Short:
FT_ERROR(( "pfr_extra_items_parse: invalid extra items table\n" ));
error = PFR_Err_Invalid_Table;
goto Exit;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PFR HEADER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static const FT_Frame_Field pfr_header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE PFR_HeaderRec
FT_FRAME_START( 58 ),
FT_FRAME_ULONG ( signature ),
FT_FRAME_USHORT( version ),
FT_FRAME_USHORT( signature2 ),
FT_FRAME_USHORT( header_size ),
FT_FRAME_USHORT( log_dir_size ),
FT_FRAME_USHORT( log_dir_offset ),
FT_FRAME_USHORT( log_font_max_size ),
FT_FRAME_UOFF3 ( log_font_section_size ),
FT_FRAME_UOFF3 ( log_font_section_offset ),
FT_FRAME_USHORT( phy_font_max_size ),
FT_FRAME_UOFF3 ( phy_font_section_size ),
FT_FRAME_UOFF3 ( phy_font_section_offset ),
FT_FRAME_USHORT( gps_max_size ),
FT_FRAME_UOFF3 ( gps_section_size ),
FT_FRAME_UOFF3 ( gps_section_offset ),
FT_FRAME_BYTE ( max_blue_values ),
FT_FRAME_BYTE ( max_x_orus ),
FT_FRAME_BYTE ( max_y_orus ),
FT_FRAME_BYTE ( phy_font_max_size_high ),
FT_FRAME_BYTE ( color_flags ),
FT_FRAME_UOFF3 ( bct_max_size ),
FT_FRAME_UOFF3 ( bct_set_max_size ),
FT_FRAME_UOFF3 ( phy_bct_set_max_size ),
FT_FRAME_USHORT( num_phy_fonts ),
FT_FRAME_BYTE ( max_vert_stem_snap ),
FT_FRAME_BYTE ( max_horz_stem_snap ),
FT_FRAME_USHORT( max_chars ),
FT_FRAME_END
};
FT_LOCAL_DEF( FT_Error )
pfr_header_load( PFR_Header header,
FT_Stream stream )
{
FT_Error error;
/* read header directly */
if ( !FT_STREAM_SEEK( 0 ) &&
!FT_STREAM_READ_FIELDS( pfr_header_fields, header ) )
{
/* make a few adjustments to the header */
header->phy_font_max_size +=
(FT_UInt32)header->phy_font_max_size_high << 16;
}
return error;
}
FT_LOCAL_DEF( FT_Bool )
pfr_header_check( PFR_Header header )
{
FT_Bool result = 1;
/* check signature and header size */
/* "PFR0" */
if ( header->signature != 0x50465230L ||
header->version > 4 ||
header->header_size < 58 ||
/* CR/LF */
header->signature2 != 0x0d0a )
{
result = 0;
}
return result;
}
/***********************************************************************/
/***********************************************************************/
/***** *****/
/***** PFR LOGICAL FONTS *****/
/***** *****/
/***********************************************************************/
/***********************************************************************/
FT_LOCAL_DEF( FT_Error )
pfr_log_font_count( FT_Stream stream,
FT_UInt32 section_offset,
FT_UInt *acount )
{
FT_Error error;
FT_UInt count;
FT_UInt result = 0;
if ( FT_STREAM_SEEK( section_offset ) || FT_READ_USHORT( count ) )
goto Exit;
result = count;
Exit:
*acount = result;
return error;
}
FT_LOCAL_DEF( FT_Error )
pfr_log_font_load( PFR_LogFont log_font,
FT_Stream stream,
FT_UInt idx,
FT_UInt32 section_offset,
FT_Bool size_increment )
{
FT_UInt num_log_fonts;
FT_UInt flags;
FT_UInt32 offset;
FT_UInt32 size;
FT_Error error;
if ( FT_STREAM_SEEK( section_offset ) ||
FT_READ_USHORT( num_log_fonts ) )
goto Exit;
if ( idx >= num_log_fonts )
return PFR_Err_Invalid_Argument;
if ( FT_STREAM_SKIP( idx * 5 ) ||
FT_READ_USHORT( size ) ||
FT_READ_UOFF3 ( offset ) )
goto Exit;
/* save logical font size and offset */
log_font->size = size;
log_font->offset = offset;
/* now, check the rest of the table before loading it */
{
FT_Byte* p;
FT_Byte* limit;
FT_UInt local;
if ( FT_STREAM_SEEK( offset ) || FT_FRAME_ENTER( size ) )
goto Exit;
p = stream->cursor;
limit = p + size;
PFR_CHECK(13);
log_font->matrix[0] = PFR_NEXT_LONG( p );
log_font->matrix[1] = PFR_NEXT_LONG( p );
log_font->matrix[2] = PFR_NEXT_LONG( p );
log_font->matrix[3] = PFR_NEXT_LONG( p );
flags = PFR_NEXT_BYTE( p );
local = 0;
if ( flags & PFR_LOG_STROKE )
{
local++;
if ( flags & PFR_LOG_2BYTE_STROKE )
local++;
if ( (flags & PFR_LINE_JOIN_MASK) == PFR_LINE_JOIN_MITER )
local += 3;
}
if ( flags & PFR_LOG_BOLD )
{
local++;
if ( flags & PFR_LOG_2BYTE_BOLD )
local++;
}
PFR_CHECK( local );
if ( flags & PFR_LOG_STROKE )
{
log_font->stroke_thickness = ( flags & PFR_LOG_2BYTE_STROKE )
? PFR_NEXT_SHORT( p )
: PFR_NEXT_BYTE( p );
if ( ( flags & PFR_LINE_JOIN_MASK ) == PFR_LINE_JOIN_MITER )
log_font->miter_limit = PFR_NEXT_LONG( p );
}
if ( flags & PFR_LOG_BOLD )
{
log_font->bold_thickness = ( flags & PFR_LOG_2BYTE_BOLD )
? PFR_NEXT_SHORT( p )
: PFR_NEXT_BYTE( p );
}
if ( flags & PFR_LOG_EXTRA_ITEMS )
{
error = pfr_extra_items_skip( &p, limit );
if (error) goto Fail;
}
PFR_CHECK(5);
log_font->phys_size = PFR_NEXT_USHORT( p );
log_font->phys_offset = PFR_NEXT_ULONG( p );
if ( size_increment )
{
PFR_CHECK( 1 );
log_font->phys_size += (FT_UInt32)PFR_NEXT_BYTE( p ) << 16;
}
}
Fail:
FT_FRAME_EXIT();
Exit:
return error;
Too_Short:
FT_ERROR(( "pfr_log_font_load: invalid logical font table\n" ));
error = PFR_Err_Invalid_Table;
goto Fail;
}
/***********************************************************************/
/***********************************************************************/
/***** *****/
/***** PFR PHYSICAL FONTS *****/
/***** *****/
/***********************************************************************/
/***********************************************************************/
/* load bitmap strikes lists */
FT_CALLBACK_DEF( FT_Error )
pfr_extra_item_load_bitmap_info( FT_Byte* p,
FT_Byte* limit,
PFR_PhyFont phy_font )
{
FT_Memory memory = phy_font->memory;
PFR_Strike strike;
FT_UInt flags0;
FT_UInt n, count, size1;
FT_Error error = PFR_Err_Ok;
PFR_CHECK( 5 );
/* skip bctSize */
p += 3;
flags0 = PFR_NEXT_BYTE( p );
count = PFR_NEXT_BYTE( p );
/* re-allocate when needed */
if ( phy_font->num_strikes + count > phy_font->max_strikes )
{
FT_UInt new_max = FT_PAD_CEIL( phy_font->num_strikes + count, 4 );
if ( FT_RENEW_ARRAY( phy_font->strikes,
phy_font->num_strikes,
new_max ) )
goto Exit;
phy_font->max_strikes = new_max;
}
size1 = 1 + 1 + 1 + 2 + 2 + 1;
if ( flags0 & PFR_STRIKE_2BYTE_XPPM )
size1++;
if ( flags0 & PFR_STRIKE_2BYTE_YPPM )
size1++;
if ( flags0 & PFR_STRIKE_3BYTE_SIZE )
size1++;
if ( flags0 & PFR_STRIKE_3BYTE_OFFSET )
size1++;
if ( flags0 & PFR_STRIKE_2BYTE_COUNT )
size1++;
strike = phy_font->strikes + phy_font->num_strikes;
PFR_CHECK( count * size1 );
for ( n = 0; n < count; n++, strike++ )
{
strike->x_ppm = ( flags0 & PFR_STRIKE_2BYTE_XPPM )
? PFR_NEXT_USHORT( p )
: PFR_NEXT_BYTE( p );
strike->y_ppm = ( flags0 & PFR_STRIKE_2BYTE_YPPM )
? PFR_NEXT_USHORT( p )
: PFR_NEXT_BYTE( p );
strike->flags = PFR_NEXT_BYTE( p );
strike->bct_size = ( flags0 & PFR_STRIKE_3BYTE_SIZE )
? PFR_NEXT_ULONG( p )
: PFR_NEXT_USHORT( p );
strike->bct_offset = ( flags0 & PFR_STRIKE_3BYTE_OFFSET )
? PFR_NEXT_ULONG( p )
: PFR_NEXT_USHORT( p );
strike->num_bitmaps = ( flags0 & PFR_STRIKE_2BYTE_COUNT )
? PFR_NEXT_USHORT( p )
: PFR_NEXT_BYTE( p );
}
phy_font->num_strikes += count;
Exit:
return error;
Too_Short:
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_extra_item_load_bitmap_info:"
" invalid bitmap info table\n" ));
goto Exit;
}
/* Load font ID. This is a so-called "unique" name that is rather
* long and descriptive (like "Tiresias ScreenFont v7.51").
*
* Note that a PFR font's family name is contained in an *undocumented*
* string of the "auxiliary data" portion of a physical font record. This
* may also contain the "real" style name!
*
* If no family name is present, the font ID is used instead for the
* family.
*/
FT_CALLBACK_DEF( FT_Error )
pfr_extra_item_load_font_id( FT_Byte* p,
FT_Byte* limit,
PFR_PhyFont phy_font )
{
FT_Error error = PFR_Err_Ok;
FT_Memory memory = phy_font->memory;
FT_PtrDist len = limit - p;
if ( phy_font->font_id != NULL )
goto Exit;
if ( FT_ALLOC( phy_font->font_id, len + 1 ) )
goto Exit;
/* copy font ID name, and terminate it for safety */
FT_MEM_COPY( phy_font->font_id, p, len );
phy_font->font_id[len] = 0;
Exit:
return error;
}
/* load stem snap tables */
FT_CALLBACK_DEF( FT_Error )
pfr_extra_item_load_stem_snaps( FT_Byte* p,
FT_Byte* limit,
PFR_PhyFont phy_font )
{
FT_UInt count, num_vert, num_horz;
FT_Int* snaps = NULL;
FT_Error error = PFR_Err_Ok;
FT_Memory memory = phy_font->memory;
if ( phy_font->vertical.stem_snaps != NULL )
goto Exit;
PFR_CHECK( 1 );
count = PFR_NEXT_BYTE( p );
num_vert = count & 15;
num_horz = count >> 4;
count = num_vert + num_horz;
PFR_CHECK( count * 2 );
if ( FT_NEW_ARRAY( snaps, count ) )
goto Exit;
phy_font->vertical.stem_snaps = snaps;
phy_font->horizontal.stem_snaps = snaps + num_vert;
for ( ; count > 0; count--, snaps++ )
*snaps = FT_NEXT_SHORT( p );
Exit:
return error;
Too_Short:
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_exta_item_load_stem_snaps:"
" invalid stem snaps table\n" ));
goto Exit;
}
/* load kerning pair data */
FT_CALLBACK_DEF( FT_Error )
pfr_extra_item_load_kerning_pairs( FT_Byte* p,
FT_Byte* limit,
PFR_PhyFont phy_font )
{
PFR_KernItem item = NULL;
FT_Error error = PFR_Err_Ok;
FT_Memory memory = phy_font->memory;
FT_TRACE2(( "pfr_extra_item_load_kerning_pairs()\n" ));
if ( FT_NEW( item ) )
goto Exit;
PFR_CHECK( 4 );
item->pair_count = PFR_NEXT_BYTE( p );
item->base_adj = PFR_NEXT_SHORT( p );
item->flags = PFR_NEXT_BYTE( p );
item->offset = phy_font->offset + ( p - phy_font->cursor );
#ifndef PFR_CONFIG_NO_CHECKS
item->pair_size = 3;
if ( item->flags & PFR_KERN_2BYTE_CHAR )
item->pair_size += 2;
if ( item->flags & PFR_KERN_2BYTE_ADJ )
item->pair_size += 1;
PFR_CHECK( item->pair_count * item->pair_size );
#endif
/* load first and last pairs into the item to speed up */
/* lookup later... */
if ( item->pair_count > 0 )
{
FT_UInt char1, char2;
FT_Byte* q;
if ( item->flags & PFR_KERN_2BYTE_CHAR )
{
q = p;
char1 = PFR_NEXT_USHORT( q );
char2 = PFR_NEXT_USHORT( q );
item->pair1 = PFR_KERN_INDEX( char1, char2 );
q = p + item->pair_size * ( item->pair_count - 1 );
char1 = PFR_NEXT_USHORT( q );
char2 = PFR_NEXT_USHORT( q );
item->pair2 = PFR_KERN_INDEX( char1, char2 );
}
else
{
q = p;
char1 = PFR_NEXT_BYTE( q );
char2 = PFR_NEXT_BYTE( q );
item->pair1 = PFR_KERN_INDEX( char1, char2 );
q = p + item->pair_size * ( item->pair_count - 1 );
char1 = PFR_NEXT_BYTE( q );
char2 = PFR_NEXT_BYTE( q );
item->pair2 = PFR_KERN_INDEX( char1, char2 );
}
/* add new item to the current list */
item->next = NULL;
*phy_font->kern_items_tail = item;
phy_font->kern_items_tail = &item->next;
phy_font->num_kern_pairs += item->pair_count;
}
else
{
/* empty item! */
FT_FREE( item );
}
Exit:
return error;
Too_Short:
FT_FREE( item );
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_extra_item_load_kerning_pairs:"
" invalid kerning pairs table\n" ));
goto Exit;
}
static const PFR_ExtraItemRec pfr_phy_font_extra_items[] =
{
{ 1, (PFR_ExtraItem_ParseFunc)pfr_extra_item_load_bitmap_info },
{ 2, (PFR_ExtraItem_ParseFunc)pfr_extra_item_load_font_id },
{ 3, (PFR_ExtraItem_ParseFunc)pfr_extra_item_load_stem_snaps },
{ 4, (PFR_ExtraItem_ParseFunc)pfr_extra_item_load_kerning_pairs },
{ 0, NULL }
};
/* Loads a name from the auxiliary data. Since this extracts undocumented
* strings from the font file, we need to be careful here.
*/
static FT_Error
pfr_aux_name_load( FT_Byte* p,
FT_UInt len,
FT_Memory memory,
FT_String* *astring )
{
FT_Error error = PFR_Err_Ok;
FT_String* result = NULL;
FT_UInt n, ok;
if ( len > 0 && p[len - 1] == 0 )
len--;
/* check that each character is ASCII for making sure not to
load garbage
*/
ok = ( len > 0 );
for ( n = 0; n < len; n++ )
if ( p[n] < 32 || p[n] > 127 )
{
ok = 0;
break;
}
if ( ok )
{
if ( FT_ALLOC( result, len + 1 ) )
goto Exit;
FT_MEM_COPY( result, p, len );
result[len] = 0;
}
Exit:
*astring = result;
return error;
}
FT_LOCAL_DEF( void )
pfr_phy_font_done( PFR_PhyFont phy_font,
FT_Memory memory )
{
FT_FREE( phy_font->font_id );
FT_FREE( phy_font->family_name );
FT_FREE( phy_font->style_name );
FT_FREE( phy_font->vertical.stem_snaps );
phy_font->vertical.num_stem_snaps = 0;
phy_font->horizontal.stem_snaps = NULL;
phy_font->horizontal.num_stem_snaps = 0;
FT_FREE( phy_font->strikes );
phy_font->num_strikes = 0;
phy_font->max_strikes = 0;
FT_FREE( phy_font->chars );
phy_font->num_chars = 0;
phy_font->chars_offset = 0;
FT_FREE( phy_font->blue_values );
phy_font->num_blue_values = 0;
{
PFR_KernItem item, next;
item = phy_font->kern_items;
while ( item )
{
next = item->next;
FT_FREE( item );
item = next;
}
phy_font->kern_items = NULL;
phy_font->kern_items_tail = NULL;
}
phy_font->num_kern_pairs = 0;
}
FT_LOCAL_DEF( FT_Error )
pfr_phy_font_load( PFR_PhyFont phy_font,
FT_Stream stream,
FT_UInt32 offset,
FT_UInt32 size )
{
FT_Error error;
FT_Memory memory = stream->memory;
FT_UInt flags;
FT_ULong num_aux;
FT_Byte* p;
FT_Byte* limit;
phy_font->memory = memory;
phy_font->offset = offset;
phy_font->kern_items = NULL;
phy_font->kern_items_tail = &phy_font->kern_items;
if ( FT_STREAM_SEEK( offset ) || FT_FRAME_ENTER( size ) )
goto Exit;
phy_font->cursor = stream->cursor;
p = stream->cursor;
limit = p + size;
PFR_CHECK( 15 );
phy_font->font_ref_number = PFR_NEXT_USHORT( p );
phy_font->outline_resolution = PFR_NEXT_USHORT( p );
phy_font->metrics_resolution = PFR_NEXT_USHORT( p );
phy_font->bbox.xMin = PFR_NEXT_SHORT( p );
phy_font->bbox.yMin = PFR_NEXT_SHORT( p );
phy_font->bbox.xMax = PFR_NEXT_SHORT( p );
phy_font->bbox.yMax = PFR_NEXT_SHORT( p );
phy_font->flags = flags = PFR_NEXT_BYTE( p );
/* get the standard advance for non-proportional fonts */
if ( !(flags & PFR_PHY_PROPORTIONAL) )
{
PFR_CHECK( 2 );
phy_font->standard_advance = PFR_NEXT_SHORT( p );
}
/* load the extra items when present */
if ( flags & PFR_PHY_EXTRA_ITEMS )
{
error = pfr_extra_items_parse( &p, limit,
pfr_phy_font_extra_items, phy_font );
if ( error )
goto Fail;
}
/* In certain fonts, the auxiliary bytes contain interesting */
/* information. These are not in the specification but can be */
/* guessed by looking at the content of a few PFR0 fonts. */
PFR_CHECK( 3 );
num_aux = PFR_NEXT_ULONG( p );
if ( num_aux > 0 )
{
FT_Byte* q = p;
FT_Byte* q2;
PFR_CHECK( num_aux );
p += num_aux;
while ( num_aux > 0 )
{
FT_UInt length, type;
if ( q + 4 > p )
break;
length = PFR_NEXT_USHORT( q );
if ( length < 4 || length > num_aux )
break;
q2 = q + length - 2;
type = PFR_NEXT_USHORT( q );
switch ( type )
{
case 1:
/* this seems to correspond to the font's family name,
* padded to 16-bits with one zero when necessary
*/
error = pfr_aux_name_load( q, length - 4U, memory,
&phy_font->family_name );
if ( error )
goto Exit;
break;
case 2:
if ( q + 32 > q2 )
break;
q += 10;
phy_font->ascent = PFR_NEXT_SHORT( q );
phy_font->descent = PFR_NEXT_SHORT( q );
phy_font->leading = PFR_NEXT_SHORT( q );
q += 16;
break;
case 3:
/* this seems to correspond to the font's style name,
* padded to 16-bits with one zero when necessary
*/
error = pfr_aux_name_load( q, length - 4U, memory,
&phy_font->style_name );
if ( error )
goto Exit;
break;
default:
;
}
q = q2;
num_aux -= length;
}
}
/* read the blue values */
{
FT_UInt n, count;
PFR_CHECK( 1 );
phy_font->num_blue_values = count = PFR_NEXT_BYTE( p );
PFR_CHECK( count * 2 );
if ( FT_NEW_ARRAY( phy_font->blue_values, count ) )
goto Fail;
for ( n = 0; n < count; n++ )
phy_font->blue_values[n] = PFR_NEXT_SHORT( p );
}
PFR_CHECK( 8 );
phy_font->blue_fuzz = PFR_NEXT_BYTE( p );
phy_font->blue_scale = PFR_NEXT_BYTE( p );
phy_font->vertical.standard = PFR_NEXT_USHORT( p );
phy_font->horizontal.standard = PFR_NEXT_USHORT( p );
/* read the character descriptors */
{
FT_UInt n, count, Size;
phy_font->num_chars = count = PFR_NEXT_USHORT( p );
phy_font->chars_offset = offset + ( p - stream->cursor );
if ( FT_NEW_ARRAY( phy_font->chars, count ) )
goto Fail;
Size = 1 + 1 + 2;
if ( flags & PFR_PHY_2BYTE_CHARCODE )
Size += 1;
if ( flags & PFR_PHY_PROPORTIONAL )
Size += 2;
if ( flags & PFR_PHY_ASCII_CODE )
Size += 1;
if ( flags & PFR_PHY_2BYTE_GPS_SIZE )
Size += 1;
if ( flags & PFR_PHY_3BYTE_GPS_OFFSET )
Size += 1;
PFR_CHECK( count * Size );
for ( n = 0; n < count; n++ )
{
PFR_Char cur = &phy_font->chars[n];
cur->char_code = ( flags & PFR_PHY_2BYTE_CHARCODE )
? PFR_NEXT_USHORT( p )
: PFR_NEXT_BYTE( p );
cur->advance = ( flags & PFR_PHY_PROPORTIONAL )
? PFR_NEXT_SHORT( p )
: (FT_Int) phy_font->standard_advance;
#if 0
cur->ascii = ( flags & PFR_PHY_ASCII_CODE )
? PFR_NEXT_BYTE( p )
: 0;
#else
if ( flags & PFR_PHY_ASCII_CODE )
p += 1;
#endif
cur->gps_size = ( flags & PFR_PHY_2BYTE_GPS_SIZE )
? PFR_NEXT_USHORT( p )
: PFR_NEXT_BYTE( p );
cur->gps_offset = ( flags & PFR_PHY_3BYTE_GPS_OFFSET )
? PFR_NEXT_ULONG( p )
: PFR_NEXT_USHORT( p );
}
}
/* that's it! */
Fail:
FT_FRAME_EXIT();
/* save position of bitmap info */
phy_font->bct_offset = FT_STREAM_POS();
phy_font->cursor = NULL;
Exit:
return error;
Too_Short:
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_phy_font_load: invalid physical font table\n" ));
goto Fail;
}
/* END */
/***************************************************************************/
/* */
/* pfrgload.c */
/* */
/* FreeType PFR glyph loader (body). */
/* */
/* Copyright 2002, 2003, 2005, 2007, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* pfrgload.h */
/* */
/* FreeType PFR glyph loader (specification). */
/* */
/* Copyright 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PFRGLOAD_H__
FT_BEGIN_HEADER
FT_LOCAL( void )
pfr_glyph_init( PFR_Glyph glyph,
FT_GlyphLoader loader );
FT_LOCAL( void )
pfr_glyph_done( PFR_Glyph glyph );
FT_LOCAL( FT_Error )
pfr_glyph_load( PFR_Glyph glyph,
FT_Stream stream,
FT_ULong gps_offset,
FT_ULong offset,
FT_ULong size );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* pfrsbit.h */
/* */
/* FreeType PFR bitmap loader (specification). */
/* */
/* Copyright 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PFRSBIT_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
pfr_slot_load_bitmap( PFR_Slot glyph,
PFR_Size size,
FT_UInt glyph_index );
FT_END_HEADER
/* END */
/* for macro definitions */
#undef FT_COMPONENT
#define FT_COMPONENT trace_pfr
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PFR GLYPH BUILDER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( void )
pfr_glyph_init( PFR_Glyph glyph,
FT_GlyphLoader loader )
{
FT_ZERO( glyph );
glyph->loader = loader;
glyph->path_begun = 0;
FT_GlyphLoader_Rewind( loader );
}
FT_LOCAL_DEF( void )
pfr_glyph_done( PFR_Glyph glyph )
{
FT_Memory memory = glyph->loader->memory;
FT_FREE( glyph->x_control );
glyph->y_control = NULL;
glyph->max_xy_control = 0;
#if 0
glyph->num_x_control = 0;
glyph->num_y_control = 0;
#endif
FT_FREE( glyph->subs );
glyph->max_subs = 0;
glyph->num_subs = 0;
glyph->loader = NULL;
glyph->path_begun = 0;
}
/* close current contour, if any */
static void
pfr_glyph_close_contour( PFR_Glyph glyph )
{
FT_GlyphLoader loader = glyph->loader;
FT_Outline* outline = &loader->current.outline;
FT_Int last, first;
if ( !glyph->path_begun )
return;
/* compute first and last point indices in current glyph outline */
last = outline->n_points - 1;
first = 0;
if ( outline->n_contours > 0 )
first = outline->contours[outline->n_contours - 1];
/* if the last point falls on the same location than the first one */
/* we need to delete it */
if ( last > first )
{
FT_Vector* p1 = outline->points + first;
FT_Vector* p2 = outline->points + last;
if ( p1->x == p2->x && p1->y == p2->y )
{
outline->n_points--;
last--;
}
}
/* don't add empty contours */
if ( last >= first )
outline->contours[outline->n_contours++] = (short)last;
glyph->path_begun = 0;
}
/* reset glyph to start the loading of a new glyph */
static void
pfr_glyph_start( PFR_Glyph glyph )
{
glyph->path_begun = 0;
}
static FT_Error
pfr_glyph_line_to( PFR_Glyph glyph,
FT_Vector* to )
{
FT_GlyphLoader loader = glyph->loader;
FT_Outline* outline = &loader->current.outline;
FT_Error error;
/* check that we have begun a new path */
if ( !glyph->path_begun )
{
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_glyph_line_to: invalid glyph data\n" ));
goto Exit;
}
error = FT_GLYPHLOADER_CHECK_POINTS( loader, 1, 0 );
if ( !error )
{
FT_UInt n = outline->n_points;
outline->points[n] = *to;
outline->tags [n] = FT_CURVE_TAG_ON;
outline->n_points++;
}
Exit:
return error;
}
static FT_Error
pfr_glyph_curve_to( PFR_Glyph glyph,
FT_Vector* control1,
FT_Vector* control2,
FT_Vector* to )
{
FT_GlyphLoader loader = glyph->loader;
FT_Outline* outline = &loader->current.outline;
FT_Error error;
/* check that we have begun a new path */
if ( !glyph->path_begun )
{
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_glyph_line_to: invalid glyph data\n" ));
goto Exit;
}
error = FT_GLYPHLOADER_CHECK_POINTS( loader, 3, 0 );
if ( !error )
{
FT_Vector* vec = outline->points + outline->n_points;
FT_Byte* tag = (FT_Byte*)outline->tags + outline->n_points;
vec[0] = *control1;
vec[1] = *control2;
vec[2] = *to;
tag[0] = FT_CURVE_TAG_CUBIC;
tag[1] = FT_CURVE_TAG_CUBIC;
tag[2] = FT_CURVE_TAG_ON;
outline->n_points = (FT_Short)( outline->n_points + 3 );
}
Exit:
return error;
}
static FT_Error
pfr_glyph_move_to( PFR_Glyph glyph,
FT_Vector* to )
{
FT_GlyphLoader loader = glyph->loader;
FT_Error error;
/* close current contour if any */
pfr_glyph_close_contour( glyph );
/* indicate that a new contour has started */
glyph->path_begun = 1;
/* check that there is space for a new contour and a new point */
error = FT_GLYPHLOADER_CHECK_POINTS( loader, 1, 1 );
if ( !error )
/* add new start point */
error = pfr_glyph_line_to( glyph, to );
return error;
}
static void
pfr_glyph_end( PFR_Glyph glyph )
{
/* close current contour if any */
pfr_glyph_close_contour( glyph );
/* merge the current glyph into the stack */
FT_GlyphLoader_Add( glyph->loader );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PFR GLYPH LOADER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* load a simple glyph */
static FT_Error
pfr_glyph_load_simple( PFR_Glyph glyph,
FT_Byte* p,
FT_Byte* limit )
{
FT_Error error = PFR_Err_Ok;
FT_Memory memory = glyph->loader->memory;
FT_UInt flags, x_count, y_count, i, count, mask;
FT_Int x;
PFR_CHECK( 1 );
flags = PFR_NEXT_BYTE( p );
/* test for composite glyphs */
if ( flags & PFR_GLYPH_IS_COMPOUND )
goto Failure;
x_count = 0;
y_count = 0;
if ( flags & PFR_GLYPH_1BYTE_XYCOUNT )
{
PFR_CHECK( 1 );
count = PFR_NEXT_BYTE( p );
x_count = count & 15;
y_count = count >> 4;
}
else
{
if ( flags & PFR_GLYPH_XCOUNT )
{
PFR_CHECK( 1 );
x_count = PFR_NEXT_BYTE( p );
}
if ( flags & PFR_GLYPH_YCOUNT )
{
PFR_CHECK( 1 );
y_count = PFR_NEXT_BYTE( p );
}
}
count = x_count + y_count;
/* re-allocate array when necessary */
if ( count > glyph->max_xy_control )
{
FT_UInt new_max = FT_PAD_CEIL( count, 8 );
if ( FT_RENEW_ARRAY( glyph->x_control,
glyph->max_xy_control,
new_max ) )
goto Exit;
glyph->max_xy_control = new_max;
}
glyph->y_control = glyph->x_control + x_count;
mask = 0;
x = 0;
for ( i = 0; i < count; i++ )
{
if ( ( i & 7 ) == 0 )
{
PFR_CHECK( 1 );
mask = PFR_NEXT_BYTE( p );
}
if ( mask & 1 )
{
PFR_CHECK( 2 );
x = PFR_NEXT_SHORT( p );
}
else
{
PFR_CHECK( 1 );
x += PFR_NEXT_BYTE( p );
}
glyph->x_control[i] = x;
mask >>= 1;
}
/* XXX: for now we ignore the secondary stroke and edge definitions */
/* since we don't want to support native PFR hinting */
/* */
if ( flags & PFR_GLYPH_EXTRA_ITEMS )
{
error = pfr_extra_items_skip( &p, limit );
if ( error )
goto Exit;
}
pfr_glyph_start( glyph );
/* now load a simple glyph */
{
FT_Vector pos[4];
FT_Vector* cur;
pos[0].x = pos[0].y = 0;
pos[3] = pos[0];
for (;;)
{
FT_UInt format, format_low, args_format = 0, args_count, n;
/***************************************************************/
/* read instruction */
/* */
PFR_CHECK( 1 );
format = PFR_NEXT_BYTE( p );
format_low = format & 15;
switch ( format >> 4 )
{
/* end glyph */
case 0:
FT_TRACE6(( "- end glyph" ));
args_count = 0;
break;
/* general line operation */
case 1:
FT_TRACE6(( "- general line" ));
goto Line1;
/* move to inside contour */
case 4:
FT_TRACE6(( "- move to inside" ));
goto Line1;
/* move to outside contour */
case 5:
FT_TRACE6(( "- move to outside" ));
Line1:
args_format = format_low;
args_count = 1;
break;
/* horizontal line to */
case 2:
FT_TRACE6(( "- horizontal line to cx.%d", format_low ));
if ( format_low >= x_count )
goto Failure;
pos[0].x = glyph->x_control[format_low];
pos[0].y = pos[3].y;
pos[3] = pos[0];
args_count = 0;
break;
/* vertical line to */
case 3:
FT_TRACE6(( "- vertical line to cy.%d", format_low ));
if ( format_low >= y_count )
goto Failure;
pos[0].x = pos[3].x;
pos[0].y = glyph->y_control[format_low];
pos[3] = pos[0];
args_count = 0;
break;
/* horizontal to vertical curve */
case 6:
FT_TRACE6(( "- hv curve " ));
args_format = 0xB8E;
args_count = 3;
break;
/* vertical to horizontal curve */
case 7:
FT_TRACE6(( "- vh curve" ));
args_format = 0xE2B;
args_count = 3;
break;
/* general curve to */
default:
FT_TRACE6(( "- general curve" ));
args_count = 4;
args_format = format_low;
}
/***********************************************************/
/* now read arguments */
/* */
cur = pos;
for ( n = 0; n < args_count; n++ )
{
FT_UInt idx;
FT_Int delta;
/* read the X argument */
switch ( args_format & 3 )
{
/* 8-bit index */
case 0:
PFR_CHECK( 1 );
idx = PFR_NEXT_BYTE( p );
if ( idx >= x_count )
goto Failure;
cur->x = glyph->x_control[idx];
FT_TRACE7(( " cx#%d", idx ));
break;
/* 16-bit value */
case 1:
PFR_CHECK( 2 );
cur->x = PFR_NEXT_SHORT( p );
FT_TRACE7(( " x.%d", cur->x ));
break;
/* 8-bit delta */
case 2:
PFR_CHECK( 1 );
delta = PFR_NEXT_INT8( p );
cur->x = pos[3].x + delta;
FT_TRACE7(( " dx.%d", delta ));
break;
default:
FT_TRACE7(( " |" ));
cur->x = pos[3].x;
}
/* read the Y argument */
switch ( ( args_format >> 2 ) & 3 )
{
/* 8-bit index */
case 0:
PFR_CHECK( 1 );
idx = PFR_NEXT_BYTE( p );
if ( idx >= y_count )
goto Failure;
cur->y = glyph->y_control[idx];
FT_TRACE7(( " cy#%d", idx ));
break;
/* 16-bit absolute value */
case 1:
PFR_CHECK( 2 );
cur->y = PFR_NEXT_SHORT( p );
FT_TRACE7(( " y.%d", cur->y ));
break;
/* 8-bit delta */
case 2:
PFR_CHECK( 1 );
delta = PFR_NEXT_INT8( p );
cur->y = pos[3].y + delta;
FT_TRACE7(( " dy.%d", delta ));
break;
default:
FT_TRACE7(( " -" ));
cur->y = pos[3].y;
}
/* read the additional format flag for the general curve */
if ( n == 0 && args_count == 4 )
{
PFR_CHECK( 1 );
args_format = PFR_NEXT_BYTE( p );
args_count--;
}
else
args_format >>= 4;
/* save the previous point */
pos[3] = cur[0];
cur++;
}
FT_TRACE7(( "\n" ));
/***********************************************************/
/* finally, execute instruction */
/* */
switch ( format >> 4 )
{
/* end glyph => EXIT */
case 0:
pfr_glyph_end( glyph );
goto Exit;
/* line operations */
case 1:
case 2:
case 3:
error = pfr_glyph_line_to( glyph, pos );
goto Test_Error;
/* move to inside contour */
case 4:
/* move to outside contour */
case 5:
error = pfr_glyph_move_to( glyph, pos );
goto Test_Error;
/* curve operations */
default:
error = pfr_glyph_curve_to( glyph, pos, pos + 1, pos + 2 );
/* test error condition */
Test_Error:
if ( error )
goto Exit;
}
/* for (;;) */
}
}
Exit:
return error;
Failure:
Too_Short:
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_glyph_load_simple: invalid glyph data\n" ));
goto Exit;
}
/* load a composite/compound glyph */
static FT_Error
pfr_glyph_load_compound( PFR_Glyph glyph,
FT_Byte* p,
FT_Byte* limit )
{
FT_Error error = PFR_Err_Ok;
FT_GlyphLoader loader = glyph->loader;
FT_Memory memory = loader->memory;
PFR_SubGlyph subglyph;
FT_UInt flags, i, count, org_count;
FT_Int x_pos, y_pos;
PFR_CHECK( 1 );
flags = PFR_NEXT_BYTE( p );
/* test for composite glyphs */
if ( !( flags & PFR_GLYPH_IS_COMPOUND ) )
goto Failure;
count = flags & 0x3F;
/* ignore extra items when present */
/* */
if ( flags & PFR_GLYPH_EXTRA_ITEMS )
{
error = pfr_extra_items_skip( &p, limit );
if (error) goto Exit;
}
/* we can't rely on the FT_GlyphLoader to load sub-glyphs, because */
/* the PFR format is dumb, using direct file offsets to point to the */
/* sub-glyphs (instead of glyph indices). Sigh. */
/* */
/* For now, we load the list of sub-glyphs into a different array */
/* but this will prevent us from using the auto-hinter at its best */
/* quality. */
/* */
org_count = glyph->num_subs;
if ( org_count + count > glyph->max_subs )
{
FT_UInt new_max = ( org_count + count + 3 ) & (FT_UInt)-4;
/* we arbitrarily limit the number of subglyphs */
/* to avoid endless recursion */
if ( new_max > 64 )
{
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_glyph_load_compound:"
" too many compound glyphs components\n" ));
goto Exit;
}
if ( FT_RENEW_ARRAY( glyph->subs, glyph->max_subs, new_max ) )
goto Exit;
glyph->max_subs = new_max;
}
subglyph = glyph->subs + org_count;
for ( i = 0; i < count; i++, subglyph++ )
{
FT_UInt format;
x_pos = 0;
y_pos = 0;
PFR_CHECK( 1 );
format = PFR_NEXT_BYTE( p );
/* read scale when available */
subglyph->x_scale = 0x10000L;
if ( format & PFR_SUBGLYPH_XSCALE )
{
PFR_CHECK( 2 );
subglyph->x_scale = PFR_NEXT_SHORT( p ) << 4;
}
subglyph->y_scale = 0x10000L;
if ( format & PFR_SUBGLYPH_YSCALE )
{
PFR_CHECK( 2 );
subglyph->y_scale = PFR_NEXT_SHORT( p ) << 4;
}
/* read offset */
switch ( format & 3 )
{
case 1:
PFR_CHECK( 2 );
x_pos = PFR_NEXT_SHORT( p );
break;
case 2:
PFR_CHECK( 1 );
x_pos += PFR_NEXT_INT8( p );
break;
default:
;
}
switch ( ( format >> 2 ) & 3 )
{
case 1:
PFR_CHECK( 2 );
y_pos = PFR_NEXT_SHORT( p );
break;
case 2:
PFR_CHECK( 1 );
y_pos += PFR_NEXT_INT8( p );
break;
default:
;
}
subglyph->x_delta = x_pos;
subglyph->y_delta = y_pos;
/* read glyph position and size now */
if ( format & PFR_SUBGLYPH_2BYTE_SIZE )
{
PFR_CHECK( 2 );
subglyph->gps_size = PFR_NEXT_USHORT( p );
}
else
{
PFR_CHECK( 1 );
subglyph->gps_size = PFR_NEXT_BYTE( p );
}
if ( format & PFR_SUBGLYPH_3BYTE_OFFSET )
{
PFR_CHECK( 3 );
subglyph->gps_offset = PFR_NEXT_LONG( p );
}
else
{
PFR_CHECK( 2 );
subglyph->gps_offset = PFR_NEXT_USHORT( p );
}
glyph->num_subs++;
}
Exit:
return error;
Failure:
Too_Short:
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_glyph_load_compound: invalid glyph data\n" ));
goto Exit;
}
static FT_Error
pfr_glyph_load_rec( PFR_Glyph glyph,
FT_Stream stream,
FT_ULong gps_offset,
FT_ULong offset,
FT_ULong size )
{
FT_Error error;
FT_Byte* p;
FT_Byte* limit;
if ( FT_STREAM_SEEK( gps_offset + offset ) ||
FT_FRAME_ENTER( size ) )
goto Exit;
p = (FT_Byte*)stream->cursor;
limit = p + size;
if ( size > 0 && *p & PFR_GLYPH_IS_COMPOUND )
{
FT_Int n, old_count, count;
FT_GlyphLoader loader = glyph->loader;
FT_Outline* base = &loader->base.outline;
old_count = glyph->num_subs;
/* this is a compound glyph - load it */
error = pfr_glyph_load_compound( glyph, p, limit );
FT_FRAME_EXIT();
if ( error )
goto Exit;
count = glyph->num_subs - old_count;
FT_TRACE4(( "compound glyph with %d elements (offset %lu):\n",
count, offset ));
/* now, load each individual glyph */
for ( n = 0; n < count; n++ )
{
FT_Int i, old_points, num_points;
PFR_SubGlyph subglyph;
FT_TRACE4(( "subglyph %d:\n", n ));
subglyph = glyph->subs + old_count + n;
old_points = base->n_points;
error = pfr_glyph_load_rec( glyph, stream, gps_offset,
subglyph->gps_offset,
subglyph->gps_size );
if ( error )
break;
/* note that `glyph->subs' might have been re-allocated */
subglyph = glyph->subs + old_count + n;
num_points = base->n_points - old_points;
/* translate and eventually scale the new glyph points */
if ( subglyph->x_scale != 0x10000L || subglyph->y_scale != 0x10000L )
{
FT_Vector* vec = base->points + old_points;
for ( i = 0; i < num_points; i++, vec++ )
{
vec->x = FT_MulFix( vec->x, subglyph->x_scale ) +
subglyph->x_delta;
vec->y = FT_MulFix( vec->y, subglyph->y_scale ) +
subglyph->y_delta;
}
}
else
{
FT_Vector* vec = loader->base.outline.points + old_points;
for ( i = 0; i < num_points; i++, vec++ )
{
vec->x += subglyph->x_delta;
vec->y += subglyph->y_delta;
}
}
/* proceed to next sub-glyph */
}
FT_TRACE4(( "end compound glyph with %d elements\n", count ));
}
else
{
FT_TRACE4(( "simple glyph (offset %lu)\n", offset ));
/* load a simple glyph */
error = pfr_glyph_load_simple( glyph, p, limit );
FT_FRAME_EXIT();
}
Exit:
return error;
}
FT_LOCAL_DEF( FT_Error )
pfr_glyph_load( PFR_Glyph glyph,
FT_Stream stream,
FT_ULong gps_offset,
FT_ULong offset,
FT_ULong size )
{
/* initialize glyph loader */
FT_GlyphLoader_Rewind( glyph->loader );
glyph->num_subs = 0;
/* load the glyph, recursively when needed */
return pfr_glyph_load_rec( glyph, stream, gps_offset, offset, size );
}
/* END */
/***************************************************************************/
/* */
/* pfrcmap.c */
/* */
/* FreeType PFR cmap handling (body). */
/* */
/* Copyright 2002, 2007, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* pfrcmap.h */
/* */
/* FreeType PFR cmap handling (specification). */
/* */
/* Copyright 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PFRCMAP_H__
FT_BEGIN_HEADER
typedef struct PFR_CMapRec_
{
FT_CMapRec cmap;
FT_UInt num_chars;
PFR_Char chars;
} PFR_CMapRec, *PFR_CMap;
FT_CALLBACK_TABLE const FT_CMap_ClassRec pfr_cmap_class_rec;
FT_END_HEADER
/* END */
FT_CALLBACK_DEF( FT_Error )
pfr_cmap_init( PFR_CMap cmap )
{
FT_Error error = PFR_Err_Ok;
PFR_Face face = (PFR_Face)FT_CMAP_FACE( cmap );
cmap->num_chars = face->phy_font.num_chars;
cmap->chars = face->phy_font.chars;
/* just for safety, check that the character entries are correctly */
/* sorted in increasing character code order */
{
FT_UInt n;
for ( n = 1; n < cmap->num_chars; n++ )
{
if ( cmap->chars[n - 1].char_code >= cmap->chars[n].char_code )
{
error = PFR_Err_Invalid_Table;
goto Exit;
}
}
}
Exit:
return error;
}
FT_CALLBACK_DEF( void )
pfr_cmap_done( PFR_CMap cmap )
{
cmap->chars = NULL;
cmap->num_chars = 0;
}
FT_CALLBACK_DEF( FT_UInt )
pfr_cmap_char_index( PFR_CMap cmap,
FT_UInt32 char_code )
{
FT_UInt min = 0;
FT_UInt max = cmap->num_chars;
FT_UInt mid;
PFR_Char gchar;
while ( min < max )
{
mid = min + ( max - min ) / 2;
gchar = cmap->chars + mid;
if ( gchar->char_code == char_code )
return mid + 1;
if ( gchar->char_code < char_code )
min = mid + 1;
else
max = mid;
}
return 0;
}
FT_CALLBACK_DEF( FT_UInt32 )
pfr_cmap_char_next( PFR_CMap cmap,
FT_UInt32 *pchar_code )
{
FT_UInt result = 0;
FT_UInt32 char_code = *pchar_code + 1;
Restart:
{
FT_UInt min = 0;
FT_UInt max = cmap->num_chars;
FT_UInt mid;
PFR_Char gchar;
while ( min < max )
{
mid = min + ( ( max - min ) >> 1 );
gchar = cmap->chars + mid;
if ( gchar->char_code == char_code )
{
result = mid;
if ( result != 0 )
{
result++;
goto Exit;
}
char_code++;
goto Restart;
}
if ( gchar->char_code < char_code )
min = mid+1;
else
max = mid;
}
/* we didn't find it, but we have a pair just above it */
char_code = 0;
if ( min < cmap->num_chars )
{
gchar = cmap->chars + min;
result = min;
if ( result != 0 )
{
result++;
char_code = gchar->char_code;
}
}
}
Exit:
*pchar_code = char_code;
return result;
}
FT_CALLBACK_TABLE_DEF const FT_CMap_ClassRec
pfr_cmap_class_rec =
{
sizeof ( PFR_CMapRec ),
(FT_CMap_InitFunc) pfr_cmap_init,
(FT_CMap_DoneFunc) pfr_cmap_done,
(FT_CMap_CharIndexFunc)pfr_cmap_char_index,
(FT_CMap_CharNextFunc) pfr_cmap_char_next,
NULL, NULL, NULL, NULL, NULL
};
/* END */
/***************************************************************************/
/* */
/* pfrobjs.c */
/* */
/* FreeType PFR object methods (body). */
/* */
/* Copyright 2002-2008, 2010-2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#undef FT_COMPONENT
#define FT_COMPONENT trace_pfr
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** FACE OBJECT METHODS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( void )
/* PFR_Face */
pfr_face_done( FT_Face pfrface )
{
PFR_Face face = (PFR_Face)pfrface;
FT_Memory memory;
if ( !face )
return;
memory = pfrface->driver->root.memory;
/* we don't want dangling pointers */
pfrface->family_name = NULL;
pfrface->style_name = NULL;
/* finalize the physical font record */
pfr_phy_font_done( &face->phy_font, FT_FACE_MEMORY( face ) );
/* no need to finalize the logical font or the header */
FT_FREE( pfrface->available_sizes );
}
FT_LOCAL_DEF( FT_Error )
pfr_face_init( FT_Stream stream,
FT_Face pfrface,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
PFR_Face face = (PFR_Face)pfrface;
FT_Error error;
FT_UNUSED( num_params );
FT_UNUSED( params );
FT_TRACE2(( "PFR driver\n" ));
/* load the header and check it */
error = pfr_header_load( &face->header, stream );
if ( error )
goto Exit;
if ( !pfr_header_check( &face->header ) )
{
FT_TRACE2(( " not a PFR font\n" ));
error = PFR_Err_Unknown_File_Format;
goto Exit;
}
/* check face index */
{
FT_UInt num_faces;
error = pfr_log_font_count( stream,
face->header.log_dir_offset,
&num_faces );
if ( error )
goto Exit;
pfrface->num_faces = num_faces;
}
if ( face_index < 0 )
goto Exit;
if ( face_index >= pfrface->num_faces )
{
FT_ERROR(( "pfr_face_init: invalid face index\n" ));
error = PFR_Err_Invalid_Argument;
goto Exit;
}
/* load the face */
error = pfr_log_font_load(
&face->log_font, stream, face_index,
face->header.log_dir_offset,
FT_BOOL( face->header.phy_font_max_size_high != 0 ) );
if ( error )
goto Exit;
/* now load the physical font descriptor */
error = pfr_phy_font_load( &face->phy_font, stream,
face->log_font.phys_offset,
face->log_font.phys_size );
if ( error )
goto Exit;
/* now set up all root face fields */
{
PFR_PhyFont phy_font = &face->phy_font;
pfrface->face_index = face_index;
pfrface->num_glyphs = phy_font->num_chars + 1;
pfrface->face_flags = FT_FACE_FLAG_SCALABLE;
/* if all characters point to the same gps_offset 0, we */
/* assume that the font only contains bitmaps */
{
FT_UInt nn;
for ( nn = 0; nn < phy_font->num_chars; nn++ )
if ( phy_font->chars[nn].gps_offset != 0 )
break;
if ( nn == phy_font->num_chars )
{
if ( phy_font->num_strikes > 0 )
/* not scalable */
pfrface->face_flags = 0;
else
{
FT_ERROR(( "pfr_face_init: font doesn't contain glyphs\n" ));
error = PFR_Err_Invalid_File_Format;
goto Exit;
}
}
}
if ( (phy_font->flags & PFR_PHY_PROPORTIONAL) == 0 )
pfrface->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;
if ( phy_font->flags & PFR_PHY_VERTICAL )
pfrface->face_flags |= FT_FACE_FLAG_VERTICAL;
else
pfrface->face_flags |= FT_FACE_FLAG_HORIZONTAL;
if ( phy_font->num_strikes > 0 )
pfrface->face_flags |= FT_FACE_FLAG_FIXED_SIZES;
if ( phy_font->num_kern_pairs > 0 )
pfrface->face_flags |= FT_FACE_FLAG_KERNING;
/* If no family name was found in the "undocumented" auxiliary
* data, use the font ID instead. This sucks but is better than
* nothing.
*/
pfrface->family_name = phy_font->family_name;
if ( pfrface->family_name == NULL )
pfrface->family_name = phy_font->font_id;
/* note that the style name can be NULL in certain PFR fonts,
* probably meaning "Regular"
*/
pfrface->style_name = phy_font->style_name;
pfrface->num_fixed_sizes = 0;
pfrface->available_sizes = 0;
pfrface->bbox = phy_font->bbox;
pfrface->units_per_EM = (FT_UShort)phy_font->outline_resolution;
pfrface->ascender = (FT_Short) phy_font->bbox.yMax;
pfrface->descender = (FT_Short) phy_font->bbox.yMin;
pfrface->height = (FT_Short)( ( pfrface->units_per_EM * 12 ) / 10 );
if ( pfrface->height < pfrface->ascender - pfrface->descender )
pfrface->height = (FT_Short)(pfrface->ascender - pfrface->descender);
if ( phy_font->num_strikes > 0 )
{
FT_UInt n, count = phy_font->num_strikes;
FT_Bitmap_Size* size;
PFR_Strike strike;
FT_Memory memory = pfrface->stream->memory;
if ( FT_NEW_ARRAY( pfrface->available_sizes, count ) )
goto Exit;
size = pfrface->available_sizes;
strike = phy_font->strikes;
for ( n = 0; n < count; n++, size++, strike++ )
{
size->height = (FT_UShort)strike->y_ppm;
size->width = (FT_UShort)strike->x_ppm;
size->size = strike->y_ppm << 6;
size->x_ppem = strike->x_ppm << 6;
size->y_ppem = strike->y_ppm << 6;
}
pfrface->num_fixed_sizes = count;
}
/* now compute maximum advance width */
if ( ( phy_font->flags & PFR_PHY_PROPORTIONAL ) == 0 )
pfrface->max_advance_width = (FT_Short)phy_font->standard_advance;
else
{
FT_Int max = 0;
FT_UInt count = phy_font->num_chars;
PFR_Char gchar = phy_font->chars;
for ( ; count > 0; count--, gchar++ )
{
if ( max < gchar->advance )
max = gchar->advance;
}
pfrface->max_advance_width = (FT_Short)max;
}
pfrface->max_advance_height = pfrface->height;
pfrface->underline_position = (FT_Short)( -pfrface->units_per_EM / 10 );
pfrface->underline_thickness = (FT_Short)( pfrface->units_per_EM / 30 );
/* create charmap */
{
FT_CharMapRec charmap;
charmap.face = pfrface;
charmap.platform_id = TT_PLATFORM_MICROSOFT;
charmap.encoding_id = TT_MS_ID_UNICODE_CS;
charmap.encoding = FT_ENCODING_UNICODE;
error = FT_CMap_New( &pfr_cmap_class_rec, NULL, &charmap, NULL );
#if 0
/* Select default charmap */
if ( pfrface->num_charmaps )
pfrface->charmap = pfrface->charmaps[0];
#endif
}
/* check whether we've loaded any kerning pairs */
if ( phy_font->num_kern_pairs )
pfrface->face_flags |= FT_FACE_FLAG_KERNING;
}
Exit:
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** SLOT OBJECT METHOD *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( FT_Error )
/* PFR_Slot */
pfr_slot_init( FT_GlyphSlot pfrslot )
{
PFR_Slot slot = (PFR_Slot)pfrslot;
FT_GlyphLoader loader = pfrslot->internal->loader;
pfr_glyph_init( &slot->glyph, loader );
return 0;
}
FT_LOCAL_DEF( void )
/* PFR_Slot */
pfr_slot_done( FT_GlyphSlot pfrslot )
{
PFR_Slot slot = (PFR_Slot)pfrslot;
pfr_glyph_done( &slot->glyph );
}
FT_LOCAL_DEF( FT_Error )
/* PFR_Slot */
pfr_slot_load( FT_GlyphSlot pfrslot,
/* PFR_Size */
FT_Size pfrsize,
FT_UInt gindex,
FT_Int32 load_flags )
{
PFR_Slot slot = (PFR_Slot)pfrslot;
PFR_Size size = (PFR_Size)pfrsize;
FT_Error error;
PFR_Face face = (PFR_Face)pfrslot->face;
PFR_Char gchar;
FT_Outline* outline = &pfrslot->outline;
FT_ULong gps_offset;
if ( gindex > 0 )
gindex--;
if ( !face || gindex >= face->phy_font.num_chars )
{
error = PFR_Err_Invalid_Argument;
goto Exit;
}
/* try to load an embedded bitmap */
if ( ( load_flags & ( FT_LOAD_NO_SCALE | FT_LOAD_NO_BITMAP ) ) == 0 )
{
error = pfr_slot_load_bitmap( slot, size, gindex );
if ( error == 0 )
goto Exit;
}
if ( load_flags & FT_LOAD_SBITS_ONLY )
{
error = PFR_Err_Invalid_Argument;
goto Exit;
}
gchar = face->phy_font.chars + gindex;
pfrslot->format = FT_GLYPH_FORMAT_OUTLINE;
outline->n_points = 0;
outline->n_contours = 0;
gps_offset = face->header.gps_section_offset;
/* load the glyph outline (FT_LOAD_NO_RECURSE isn't supported) */
error = pfr_glyph_load( &slot->glyph, face->root.stream,
gps_offset, gchar->gps_offset, gchar->gps_size );
if ( !error )
{
FT_BBox cbox;
FT_Glyph_Metrics* metrics = &pfrslot->metrics;
FT_Pos advance;
FT_Int em_metrics, em_outline;
FT_Bool scaling;
scaling = FT_BOOL( ( load_flags & FT_LOAD_NO_SCALE ) == 0 );
/* copy outline data */
*outline = slot->glyph.loader->base.outline;
outline->flags &= ~FT_OUTLINE_OWNER;
outline->flags |= FT_OUTLINE_REVERSE_FILL;
if ( size && pfrsize->metrics.y_ppem < 24 )
outline->flags |= FT_OUTLINE_HIGH_PRECISION;
/* compute the advance vector */
metrics->horiAdvance = 0;
metrics->vertAdvance = 0;
advance = gchar->advance;
em_metrics = face->phy_font.metrics_resolution;
em_outline = face->phy_font.outline_resolution;
if ( em_metrics != em_outline )
advance = FT_MulDiv( advance, em_outline, em_metrics );
if ( face->phy_font.flags & PFR_PHY_VERTICAL )
metrics->vertAdvance = advance;
else
metrics->horiAdvance = advance;
pfrslot->linearHoriAdvance = metrics->horiAdvance;
pfrslot->linearVertAdvance = metrics->vertAdvance;
/* make-up vertical metrics(?) */
metrics->vertBearingX = 0;
metrics->vertBearingY = 0;
/* some fonts seem to be broken here! */
#if 0
/* Apply the font matrix, if any. */
/* TODO: Test existing fonts with unusual matrix */
/* whether we have to adjust Units per EM. */
{
FT_Matrix font_matrix;
font_matrix.xx = face->log_font.matrix[0] << 8;
font_matrix.yx = face->log_font.matrix[1] << 8;
font_matrix.xy = face->log_font.matrix[2] << 8;
font_matrix.yy = face->log_font.matrix[3] << 8;
FT_Outline_Transform( outline, &font_matrix );
}
#endif
/* scale when needed */
if ( scaling )
{
FT_Int n;
FT_Fixed x_scale = pfrsize->metrics.x_scale;
FT_Fixed y_scale = pfrsize->metrics.y_scale;
FT_Vector* vec = outline->points;
/* scale outline points */
for ( n = 0; n < outline->n_points; n++, vec++ )
{
vec->x = FT_MulFix( vec->x, x_scale );
vec->y = FT_MulFix( vec->y, y_scale );
}
/* scale the advance */
metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale );
metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, y_scale );
}
/* compute the rest of the metrics */
FT_Outline_Get_CBox( outline, &cbox );
metrics->width = cbox.xMax - cbox.xMin;
metrics->height = cbox.yMax - cbox.yMin;
metrics->horiBearingX = cbox.xMin;
metrics->horiBearingY = cbox.yMax - metrics->height;
}
Exit:
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** KERNING METHOD *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( FT_Error )
/* PFR_Face */
pfr_face_get_kerning( FT_Face pfrface,
FT_UInt glyph1,
FT_UInt glyph2,
FT_Vector* kerning )
{
PFR_Face face = (PFR_Face)pfrface;
FT_Error error = PFR_Err_Ok;
PFR_PhyFont phy_font = &face->phy_font;
FT_UInt32 code1, code2, pair;
kerning->x = 0;
kerning->y = 0;
if ( glyph1 > 0 )
glyph1--;
if ( glyph2 > 0 )
glyph2--;
/* convert glyph indices to character codes */
if ( glyph1 > phy_font->num_chars ||
glyph2 > phy_font->num_chars )
goto Exit;
code1 = phy_font->chars[glyph1].char_code;
code2 = phy_font->chars[glyph2].char_code;
pair = PFR_KERN_INDEX( code1, code2 );
/* now search the list of kerning items */
{
PFR_KernItem item = phy_font->kern_items;
FT_Stream stream = pfrface->stream;
for ( ; item; item = item->next )
{
if ( pair >= item->pair1 && pair <= item->pair2 )
goto FoundPair;
}
goto Exit;
/* we found an item, now parse it and find the value if any */
FoundPair:
if ( FT_STREAM_SEEK( item->offset ) ||
FT_FRAME_ENTER( item->pair_count * item->pair_size ) )
goto Exit;
{
FT_UInt count = item->pair_count;
FT_UInt size = item->pair_size;
FT_UInt power = (FT_UInt)ft_highpow2( (FT_UInt32)count );
FT_UInt probe = power * size;
FT_UInt extra = count - power;
FT_Byte* base = stream->cursor;
FT_Bool twobytes = FT_BOOL( item->flags & 1 );
FT_Bool twobyte_adj = FT_BOOL( item->flags & 2 );
FT_Byte* p;
FT_UInt32 cpair;
if ( extra > 0 )
{
p = base + extra * size;
if ( twobytes )
cpair = FT_NEXT_ULONG( p );
else
cpair = PFR_NEXT_KPAIR( p );
if ( cpair == pair )
goto Found;
if ( cpair < pair )
{
if ( twobyte_adj )
p += 2;
else
p++;
base = p;
}
}
while ( probe > size )
{
probe >>= 1;
p = base + probe;
if ( twobytes )
cpair = FT_NEXT_ULONG( p );
else
cpair = PFR_NEXT_KPAIR( p );
if ( cpair == pair )
goto Found;
if ( cpair < pair )
base += probe;
}
p = base;
if ( twobytes )
cpair = FT_NEXT_ULONG( p );
else
cpair = PFR_NEXT_KPAIR( p );
if ( cpair == pair )
{
FT_Int value;
Found:
if ( twobyte_adj )
value = FT_PEEK_SHORT( p );
else
value = p[0];
kerning->x = item->base_adj + value;
}
}
FT_FRAME_EXIT();
}
Exit:
return error;
}
/* END */
/***************************************************************************/
/* */
/* pfrdrivr.c */
/* */
/* FreeType PFR driver interface (body). */
/* */
/* Copyright 2002-2004, 2006, 2008, 2010, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* pfrdrivr.h */
/* */
/* High-level Type PFR driver interface (specification). */
/* */
/* Copyright 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __PFRDRIVR_H__
FT_BEGIN_HEADER
FT_EXPORT_VAR( const FT_Driver_ClassRec ) pfr_driver_class;
FT_END_HEADER
/* END */
FT_CALLBACK_DEF( FT_Error )
/* PFR_Face */
pfr_get_kerning( FT_Face pfrface,
FT_UInt left,
FT_UInt right,
FT_Vector *avector )
{
PFR_Face face = (PFR_Face)pfrface;
PFR_PhyFont phys = &face->phy_font;
pfr_face_get_kerning( pfrface, left, right, avector );
/* convert from metrics to outline units when necessary */
if ( phys->outline_resolution != phys->metrics_resolution )
{
if ( avector->x != 0 )
avector->x = FT_MulDiv( avector->x, phys->outline_resolution,
phys->metrics_resolution );
if ( avector->y != 0 )
avector->y = FT_MulDiv( avector->x, phys->outline_resolution,
phys->metrics_resolution );
}
return PFR_Err_Ok;
}
/*
* PFR METRICS SERVICE
*
*/
FT_CALLBACK_DEF( FT_Error )
/* PFR_Face */
pfr_get_advance( FT_Face pfrface,
FT_UInt gindex,
FT_Pos *anadvance )
{
PFR_Face face = (PFR_Face)pfrface;
FT_Error error = PFR_Err_Invalid_Argument;
*anadvance = 0;
if ( !gindex )
goto Exit;
gindex--;
if ( face )
{
PFR_PhyFont phys = &face->phy_font;
if ( gindex < phys->num_chars )
{
*anadvance = phys->chars[gindex].advance;
error = PFR_Err_Ok;
}
}
Exit:
return error;
}
FT_CALLBACK_DEF( FT_Error )
/* PFR_Face */
pfr_get_metrics( FT_Face pfrface,
FT_UInt *anoutline_resolution,
FT_UInt *ametrics_resolution,
FT_Fixed *ametrics_x_scale,
FT_Fixed *ametrics_y_scale )
{
PFR_Face face = (PFR_Face)pfrface;
PFR_PhyFont phys = &face->phy_font;
FT_Fixed x_scale, y_scale;
FT_Size size = face->root.size;
if ( anoutline_resolution )
*anoutline_resolution = phys->outline_resolution;
if ( ametrics_resolution )
*ametrics_resolution = phys->metrics_resolution;
x_scale = 0x10000L;
y_scale = 0x10000L;
if ( size )
{
x_scale = FT_DivFix( size->metrics.x_ppem << 6,
phys->metrics_resolution );
y_scale = FT_DivFix( size->metrics.y_ppem << 6,
phys->metrics_resolution );
}
if ( ametrics_x_scale )
*ametrics_x_scale = x_scale;
if ( ametrics_y_scale )
*ametrics_y_scale = y_scale;
return PFR_Err_Ok;
}
FT_CALLBACK_TABLE_DEF
const FT_Service_PfrMetricsRec pfr_metrics_service_rec =
{
pfr_get_metrics,
pfr_face_get_kerning,
pfr_get_advance
};
/*
* SERVICE LIST
*
*/
static const FT_ServiceDescRec pfr_services[] =
{
{ FT_SERVICE_ID_PFR_METRICS, &pfr_metrics_service_rec },
{ FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_PFR },
{ NULL, NULL }
};
FT_CALLBACK_DEF( FT_Module_Interface )
pfr_get_service( FT_Module module,
const FT_String* service_id )
{
FT_UNUSED( module );
return ft_service_list_lookup( pfr_services, service_id );
}
FT_CALLBACK_TABLE_DEF
const FT_Driver_ClassRec pfr_driver_class =
{
{
FT_MODULE_FONT_DRIVER |
FT_MODULE_DRIVER_SCALABLE,
sizeof ( FT_DriverRec ),
"pfr",
0x10000L,
0x20000L,
NULL,
/* FT_Module_Constructor */
0,
/* FT_Module_Destructor */
0,
pfr_get_service
},
sizeof ( PFR_FaceRec ),
sizeof ( PFR_SizeRec ),
sizeof ( PFR_SlotRec ),
pfr_face_init,
pfr_face_done,
/* FT_Size_InitFunc */
0,
/* FT_Size_DoneFunc */
0,
pfr_slot_init,
pfr_slot_done,
pfr_slot_load,
pfr_get_kerning,
/* FT_Face_AttachFunc */
0,
/* FT_Face_GetAdvancesFunc */
0,
/* FT_Size_RequestFunc */
0,
/* FT_Size_SelectFunc */
0,
};
/* END */
/***************************************************************************/
/* */
/* pfrsbit.c */
/* */
/* FreeType PFR bitmap loader (body). */
/* */
/* Copyright 2002, 2003, 2006, 2009, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#undef FT_COMPONENT
#define FT_COMPONENT trace_pfr
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PFR BIT WRITER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct PFR_BitWriter_
{
/* current line start */
FT_Byte* line;
/* line size in bytes */
FT_Int pitch;
/* width in pixels/bits */
FT_Int width;
/* number of remaining rows to scan */
FT_Int rows;
/* total number of bits to draw */
FT_Int total;
} PFR_BitWriterRec, *PFR_BitWriter;
static void
pfr_bitwriter_init( PFR_BitWriter writer,
FT_Bitmap* target,
FT_Bool decreasing )
{
writer->line = target->buffer;
writer->pitch = target->pitch;
writer->width = target->width;
writer->rows = target->rows;
writer->total = writer->width * writer->rows;
if ( !decreasing )
{
writer->line += writer->pitch * ( target->rows-1 );
writer->pitch = -writer->pitch;
}
}
static void
pfr_bitwriter_decode_bytes( PFR_BitWriter writer,
FT_Byte* p,
FT_Byte* limit )
{
FT_Int n, reload;
FT_Int left = writer->width;
FT_Byte* cur = writer->line;
FT_UInt mask = 0x80;
FT_UInt val = 0;
FT_UInt c = 0;
n = (FT_Int)( limit - p ) * 8;
if ( n > writer->total )
n = writer->total;
reload = n & 7;
for ( ; n > 0; n-- )
{
if ( ( n & 7 ) == reload )
val = *p++;
if ( val & 0x80 )
c |= mask;
val <<= 1;
mask >>= 1;
if ( --left <= 0 )
{
cur[0] = (FT_Byte)c;
left = writer->width;
mask = 0x80;
writer->line += writer->pitch;
cur = writer->line;
c = 0;
}
else if ( mask == 0 )
{
cur[0] = (FT_Byte)c;
mask = 0x80;
c = 0;
cur ++;
}
}
if ( mask != 0x80 )
cur[0] = (FT_Byte)c;
}
static void
pfr_bitwriter_decode_rle1( PFR_BitWriter writer,
FT_Byte* p,
FT_Byte* limit )
{
FT_Int n, phase, count, counts[2], reload;
FT_Int left = writer->width;
FT_Byte* cur = writer->line;
FT_UInt mask = 0x80;
FT_UInt c = 0;
n = writer->total;
phase = 1;
counts[0] = 0;
counts[1] = 0;
count = 0;
reload = 1;
for ( ; n > 0; n-- )
{
if ( reload )
{
do
{
if ( phase )
{
FT_Int v;
if ( p >= limit )
break;
v = *p++;
counts[0] = v >> 4;
counts[1] = v & 15;
phase = 0;
count = counts[0];
}
else
{
phase = 1;
count = counts[1];
}
} while ( count == 0 );
}
if ( phase )
c |= mask;
mask >>= 1;
if ( --left <= 0 )
{
cur[0] = (FT_Byte) c;
left = writer->width;
mask = 0x80;
writer->line += writer->pitch;
cur = writer->line;
c = 0;
}
else if ( mask == 0 )
{
cur[0] = (FT_Byte)c;
mask = 0x80;
c = 0;
cur ++;
}
reload = ( --count <= 0 );
}
if ( mask != 0x80 )
cur[0] = (FT_Byte) c;
}
static void
pfr_bitwriter_decode_rle2( PFR_BitWriter writer,
FT_Byte* p,
FT_Byte* limit )
{
FT_Int n, phase, count, reload;
FT_Int left = writer->width;
FT_Byte* cur = writer->line;
FT_UInt mask = 0x80;
FT_UInt c = 0;
n = writer->total;
phase = 1;
count = 0;
reload = 1;
for ( ; n > 0; n-- )
{
if ( reload )
{
do
{
if ( p >= limit )
break;
count = *p++;
phase = phase ^ 1;
} while ( count == 0 );
}
if ( phase )
c |= mask;
mask >>= 1;
if ( --left <= 0 )
{
cur[0] = (FT_Byte) c;
c = 0;
mask = 0x80;
left = writer->width;
writer->line += writer->pitch;
cur = writer->line;
}
else if ( mask == 0 )
{
cur[0] = (FT_Byte)c;
c = 0;
mask = 0x80;
cur ++;
}
reload = ( --count <= 0 );
}
if ( mask != 0x80 )
cur[0] = (FT_Byte) c;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** BITMAP DATA DECODING *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static void
pfr_lookup_bitmap_data( FT_Byte* base,
FT_Byte* limit,
FT_UInt count,
FT_UInt flags,
FT_UInt char_code,
FT_ULong* found_offset,
FT_ULong* found_size )
{
FT_UInt left, right, char_len;
FT_Bool two = FT_BOOL( flags & 1 );
FT_Byte* buff;
char_len = 4;
if ( two ) char_len += 1;
if ( flags & 2 ) char_len += 1;
if ( flags & 4 ) char_len += 1;
left = 0;
right = count;
while ( left < right )
{
FT_UInt middle, code;
middle = ( left + right ) >> 1;
buff = base + middle * char_len;
/* check that we are not outside of the table -- */
/* this is possible with broken fonts... */
if ( buff + char_len > limit )
goto Fail;
if ( two )
code = PFR_NEXT_USHORT( buff );
else
code = PFR_NEXT_BYTE( buff );
if ( code == char_code )
goto Found_It;
if ( code < char_code )
left = middle;
else
right = middle;
}
Fail:
/* Not found */
*found_size = 0;
*found_offset = 0;
return;
Found_It:
if ( flags & 2 )
*found_size = PFR_NEXT_USHORT( buff );
else
*found_size = PFR_NEXT_BYTE( buff );
if ( flags & 4 )
*found_offset = PFR_NEXT_ULONG( buff );
else
*found_offset = PFR_NEXT_USHORT( buff );
}
/* load bitmap metrics. "*padvance" must be set to the default value */
/* before calling this function... */
/* */
static FT_Error
pfr_load_bitmap_metrics( FT_Byte** pdata,
FT_Byte* limit,
FT_Long scaled_advance,
FT_Long *axpos,
FT_Long *aypos,
FT_UInt *axsize,
FT_UInt *aysize,
FT_Long *aadvance,
FT_UInt *aformat )
{
FT_Error error = PFR_Err_Ok;
FT_Byte flags;
FT_Char b;
FT_Byte* p = *pdata;
FT_Long xpos, ypos, advance;
FT_UInt xsize, ysize;
PFR_CHECK( 1 );
flags = PFR_NEXT_BYTE( p );
xpos = 0;
ypos = 0;
xsize = 0;
ysize = 0;
advance = 0;
switch ( flags & 3 )
{
case 0:
PFR_CHECK( 1 );
b = PFR_NEXT_INT8( p );
xpos = b >> 4;
ypos = ( (FT_Char)( b << 4 ) ) >> 4;
break;
case 1:
PFR_CHECK( 2 );
xpos = PFR_NEXT_INT8( p );
ypos = PFR_NEXT_INT8( p );
break;
case 2:
PFR_CHECK( 4 );
xpos = PFR_NEXT_SHORT( p );
ypos = PFR_NEXT_SHORT( p );
break;
case 3:
PFR_CHECK( 6 );
xpos = PFR_NEXT_LONG( p );
ypos = PFR_NEXT_LONG( p );
break;
default:
;
}
flags >>= 2;
switch ( flags & 3 )
{
case 0:
/* blank image */
xsize = 0;
ysize = 0;
break;
case 1:
PFR_CHECK( 1 );
b = PFR_NEXT_BYTE( p );
xsize = ( b >> 4 ) & 0xF;
ysize = b & 0xF;
break;
case 2:
PFR_CHECK( 2 );
xsize = PFR_NEXT_BYTE( p );
ysize = PFR_NEXT_BYTE( p );
break;
case 3:
PFR_CHECK( 4 );
xsize = PFR_NEXT_USHORT( p );
ysize = PFR_NEXT_USHORT( p );
break;
default:
;
}
flags >>= 2;
switch ( flags & 3 )
{
case 0:
advance = scaled_advance;
break;
case 1:
PFR_CHECK( 1 );
advance = PFR_NEXT_INT8( p ) << 8;
break;
case 2:
PFR_CHECK( 2 );
advance = PFR_NEXT_SHORT( p );
break;
case 3:
PFR_CHECK( 3 );
advance = PFR_NEXT_LONG( p );
break;
default:
;
}
*axpos = xpos;
*aypos = ypos;
*axsize = xsize;
*aysize = ysize;
*aadvance = advance;
*aformat = flags >> 2;
*pdata = p;
Exit:
return error;
Too_Short:
error = PFR_Err_Invalid_Table;
FT_ERROR(( "pfr_load_bitmap_metrics: invalid glyph data\n" ));
goto Exit;
}
static FT_Error
pfr_load_bitmap_bits( FT_Byte* p,
FT_Byte* limit,
FT_UInt format,
FT_Bool decreasing,
FT_Bitmap* target )
{
FT_Error error = PFR_Err_Ok;
PFR_BitWriterRec writer;
if ( target->rows > 0 && target->width > 0 )
{
pfr_bitwriter_init( &writer, target, decreasing );
switch ( format )
{
/* packed bits */
case 0:
pfr_bitwriter_decode_bytes( &writer, p, limit );
break;
/* RLE1 */
case 1:
pfr_bitwriter_decode_rle1( &writer, p, limit );
break;
/* RLE2 */
case 2:
pfr_bitwriter_decode_rle2( &writer, p, limit );
break;
default:
FT_ERROR(( "pfr_read_bitmap_data: invalid image type\n" ));
error = PFR_Err_Invalid_File_Format;
}
}
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** BITMAP LOADING *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL( FT_Error )
pfr_slot_load_bitmap( PFR_Slot glyph,
PFR_Size size,
FT_UInt glyph_index )
{
FT_Error error;
PFR_Face face = (PFR_Face) glyph->root.face;
FT_Stream stream = face->root.stream;
PFR_PhyFont phys = &face->phy_font;
FT_ULong gps_offset;
FT_ULong gps_size;
PFR_Char character;
PFR_Strike strike;
character = &phys->chars[glyph_index];
/* Look-up a bitmap strike corresponding to the current */
/* character dimensions */
{
FT_UInt n;
strike = phys->strikes;
for ( n = 0; n < phys->num_strikes; n++ )
{
if ( strike->x_ppm == (FT_UInt)size->root.metrics.x_ppem &&
strike->y_ppm == (FT_UInt)size->root.metrics.y_ppem )
{
goto Found_Strike;
}
strike++;
}
/* couldn't find it */
return PFR_Err_Invalid_Argument;
}
Found_Strike:
/* Now lookup the glyph's position within the file */
{
FT_UInt char_len;
char_len = 4;
if ( strike->flags & 1 ) char_len += 1;
if ( strike->flags & 2 ) char_len += 1;
if ( strike->flags & 4 ) char_len += 1;
/* Access data directly in the frame to speed lookups */
if ( FT_STREAM_SEEK( phys->bct_offset + strike->bct_offset ) ||
FT_FRAME_ENTER( char_len * strike->num_bitmaps ) )
goto Exit;
pfr_lookup_bitmap_data( stream->cursor,
stream->limit,
strike->num_bitmaps,
strike->flags,
character->char_code,
&gps_offset,
&gps_size );
FT_FRAME_EXIT();
if ( gps_size == 0 )
{
/* Could not find a bitmap program string for this glyph */
error = PFR_Err_Invalid_Argument;
goto Exit;
}
}
/* get the bitmap metrics */
{
FT_Long xpos = 0, ypos = 0, advance = 0;
FT_UInt xsize = 0, ysize = 0, format = 0;
FT_Byte* p;
/* compute linear advance */
advance = character->advance;
if ( phys->metrics_resolution != phys->outline_resolution )
advance = FT_MulDiv( advance,
phys->outline_resolution,
phys->metrics_resolution );
glyph->root.linearHoriAdvance = advance;
/* compute default advance, i.e., scaled advance. This can be */
/* overridden in the bitmap header of certain glyphs. */
advance = FT_MulDiv( (FT_Fixed)size->root.metrics.x_ppem << 8,
character->advance,
phys->metrics_resolution );
if ( FT_STREAM_SEEK( face->header.gps_section_offset + gps_offset ) ||
FT_FRAME_ENTER( gps_size ) )
goto Exit;
p = stream->cursor;
error = pfr_load_bitmap_metrics( &p, stream->limit,
advance,
&xpos, &ypos,
&xsize, &ysize,
&advance, &format );
/*
* XXX: on 16bit system, we return an error for huge bitmap
* which causes a size truncation, because truncated
* size properties makes bitmap glyph broken.
*/
if ( xpos > FT_INT_MAX || ( ypos + ysize ) > FT_INT_MAX )
{
FT_TRACE1(( "pfr_slot_load_bitmap:" ));
FT_TRACE1(( "huge bitmap glyph %dx%d over FT_GlyphSlot\n",
xpos, ypos ));
error = PFR_Err_Invalid_Pixel_Size;
}
if ( !error )
{
glyph->root.format = FT_GLYPH_FORMAT_BITMAP;
/* Set up glyph bitmap and metrics */
/* XXX: needs casts to fit FT_Bitmap.{width|rows|pitch} */
glyph->root.bitmap.width = (FT_Int)xsize;
glyph->root.bitmap.rows = (FT_Int)ysize;
glyph->root.bitmap.pitch = (FT_Int)( xsize + 7 ) >> 3;
glyph->root.bitmap.pixel_mode = FT_PIXEL_MODE_MONO;
/* XXX: needs casts to fit FT_Glyph_Metrics.{width|height} */
glyph->root.metrics.width = (FT_Pos)xsize << 6;
glyph->root.metrics.height = (FT_Pos)ysize << 6;
glyph->root.metrics.horiBearingX = xpos << 6;
glyph->root.metrics.horiBearingY = ypos << 6;
glyph->root.metrics.horiAdvance = FT_PIX_ROUND( ( advance >> 2 ) );
glyph->root.metrics.vertBearingX = - glyph->root.metrics.width >> 1;
glyph->root.metrics.vertBearingY = 0;
glyph->root.metrics.vertAdvance = size->root.metrics.height;
/* XXX: needs casts fit FT_GlyphSlotRec.bitmap_{left|top} */
glyph->root.bitmap_left = (FT_Int)xpos;
glyph->root.bitmap_top = (FT_Int)(ypos + ysize);
/* Allocate and read bitmap data */
{
FT_ULong len = glyph->root.bitmap.pitch * ysize;
error = ft_glyphslot_alloc_bitmap( &glyph->root, len );
if ( !error )
{
error = pfr_load_bitmap_bits(
p,
stream->limit,
format,
FT_BOOL(face->header.color_flags & 2),
&glyph->root.bitmap );
}
}
}
FT_FRAME_EXIT();
}
Exit:
return error;
}
/* END */
/* END */
/***************************************************************************/
/* */
/* truetype.c */
/* */
/* FreeType TrueType driver component (body only). */
/* */
/* Copyright 1996-2001, 2004, 2006, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* ttpic.c */
/* */
/* The FreeType position independent code services for truetype module. */
/* */
/* Copyright 2009, 2010, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ttpic.h */
/* */
/* The FreeType position independent code services for truetype module. */
/* */
/* Copyright 2009, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTPIC_H__
FT_BEGIN_HEADER
#define TT_SERVICES_GET tt_services
#define TT_SERVICE_GX_MULTI_MASTERS_GET tt_service_gx_multi_masters
#define TT_SERVICE_TRUETYPE_GLYF_GET tt_service_truetype_glyf
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* tterrors.h */
/* */
/* TrueType error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the TrueType error enumeration */
/* constants. */
/* */
/*************************************************************************/
#define __TTERRORS_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX TT_Err_
#define FT_ERR_BASE FT_Mod_Err_TrueType
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/* END */
/* driver interface */
/***************************************************************************/
/* */
/* ttdriver.c */
/* */
/* TrueType font driver implementation (body). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ttdriver.h */
/* */
/* High-level TrueType driver interface (specification). */
/* */
/* Copyright 1996-2001, 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTDRIVER_H__
FT_BEGIN_HEADER
FT_DECLARE_DRIVER( tt_driver_class )
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ttgload.h */
/* */
/* TrueType Glyph Loader (specification). */
/* */
/* Copyright 1996-2006, 2008, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTGLOAD_H__
/***************************************************************************/
/* */
/* ttobjs.h */
/* */
/* Objects manager (specification). */
/* */
/* Copyright 1996-2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTOBJS_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Type> */
/* TT_Driver */
/* */
/* <Description> */
/* A handle to a TrueType driver object. */
/* */
typedef struct TT_DriverRec_* TT_Driver;
/*************************************************************************/
/* */
/* <Type> */
/* TT_Instance */
/* */
/* <Description> */
/* A handle to a TrueType size object. */
/* */
typedef struct TT_SizeRec_* TT_Size;
/*************************************************************************/
/* */
/* <Type> */
/* TT_GlyphSlot */
/* */
/* <Description> */
/* A handle to a TrueType glyph slot object. */
/* */
/* <Note> */
/* This is a direct typedef of FT_GlyphSlot, as there is nothing */
/* specific about the TrueType glyph slot. */
/* */
typedef FT_GlyphSlot TT_GlyphSlot;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_GraphicsState */
/* */
/* <Description> */
/* The TrueType graphics state used during bytecode interpretation. */
/* */
typedef struct TT_GraphicsState_
{
FT_UShort rp0;
FT_UShort rp1;
FT_UShort rp2;
FT_UnitVector dualVector;
FT_UnitVector projVector;
FT_UnitVector freeVector;
FT_Long loop;
FT_F26Dot6 minimum_distance;
FT_Int round_state;
FT_Bool auto_flip;
FT_F26Dot6 control_value_cutin;
FT_F26Dot6 single_width_cutin;
FT_F26Dot6 single_width_value;
FT_Short delta_base;
FT_Short delta_shift;
FT_Byte instruct_control;
/* According to Greg Hitchcock from Microsoft, the `scan_control' */
/* variable as documented in the TrueType specification is a 32-bit */
/* integer; the high-word part holds the SCANTYPE value, the low-word */
/* part the SCANCTRL value. We separate it into two fields. */
FT_Bool scan_control;
FT_Int scan_type;
FT_UShort gep0;
FT_UShort gep1;
FT_UShort gep2;
} TT_GraphicsState;
FT_LOCAL( void )
tt_glyphzone_done( TT_GlyphZone zone );
FT_LOCAL( FT_Error )
tt_glyphzone_new( FT_Memory memory,
FT_UShort maxPoints,
FT_Short maxContours,
TT_GlyphZone zone );
/*************************************************************************/
/* */
/* EXECUTION SUBTABLES */
/* */
/* These sub-tables relate to instruction execution. */
/* */
/*************************************************************************/
#define TT_MAX_CODE_RANGES 3
/*************************************************************************/
/* */
/* There can only be 3 active code ranges at once: */
/* - the Font Program */
/* - the CVT Program */
/* - a glyph's instructions set */
/* */
typedef enum TT_CodeRange_Tag_
{
tt_coderange_none = 0,
tt_coderange_font,
tt_coderange_cvt,
tt_coderange_glyph
} TT_CodeRange_Tag;
typedef struct TT_CodeRange_
{
FT_Byte* base;
FT_ULong size;
} TT_CodeRange;
typedef TT_CodeRange TT_CodeRangeTable[TT_MAX_CODE_RANGES];
/*************************************************************************/
/* */
/* Defines a function/instruction definition record. */
/* */
typedef struct TT_DefRecord_
{
/* in which code range is it located? */
FT_Int range;
/* where does it start? */
FT_Long start;
/* where does it end? */
FT_Long end;
/* function #, or instruction code */
FT_UInt opc;
/* is it active? */
FT_Bool active;
/* is function that defines inline delta? */
FT_Bool inline_delta;
} TT_DefRecord, *TT_DefArray;
/*************************************************************************/
/* */
/* Subglyph transformation record. */
/* */
typedef struct TT_Transform_
{
/* transformation matrix coefficients */
FT_Fixed xx, xy;
FT_Fixed yx, yy;
/* offsets */
FT_F26Dot6 ox, oy;
} TT_Transform;
/*************************************************************************/
/* */
/* A note regarding non-squared pixels: */
/* */
/* (This text will probably go into some docs at some time; for now, it */
/* is kept here to explain some definitions in the TT_Size_Metrics */
/* record). */
/* */
/* The CVT is a one-dimensional array containing values that control */
/* certain important characteristics in a font, like the height of all */
/* capitals, all lowercase letter, default spacing or stem width/height. */
/* */
/* These values are found in FUnits in the font file, and must be scaled */
/* to pixel coordinates before being used by the CVT and glyph programs. */
/* Unfortunately, when using distinct x and y resolutions (or distinct x */
/* and y pointsizes), there are two possible scalings. */
/* */
/* A first try was to implement a `lazy' scheme where all values were */
/* scaled when first used. However, while some values are always used */
/* in the same direction, some others are used under many different */
/* circumstances and orientations. */
/* */
/* I have found a simpler way to do the same, and it even seems to work */
/* in most of the cases: */
/* */
/* - All CVT values are scaled to the maximum ppem size. */
/* */
/* - When performing a read or write in the CVT, a ratio factor is used */
/* to perform adequate scaling. Example: */
/* */
/* x_ppem = 14 */
/* y_ppem = 10 */
/* */
/* We choose ppem = x_ppem = 14 as the CVT scaling size. All cvt */
/* entries are scaled to it. */
/* */
/* x_ratio = 1.0 */
/* y_ratio = y_ppem/ppem (< 1.0) */
/* */
/* We compute the current ratio like: */
/* */
/* - If projVector is horizontal, */
/* ratio = x_ratio = 1.0 */
/* */
/* - if projVector is vertical, */
/* ratio = y_ratio */
/* */
/* - else, */
/* ratio = sqrt( (proj.x * x_ratio) ^ 2 + (proj.y * y_ratio) ^ 2 ) */
/* */
/* Reading a cvt value returns */
/* ratio * cvt[index] */
/* */
/* Writing a cvt value in pixels: */
/* cvt[index] / ratio */
/* */
/* The current ppem is simply */
/* ratio * ppem */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* Metrics used by the TrueType size and context objects. */
/* */
typedef struct TT_Size_Metrics_
{
/* for non-square pixels */
FT_Long x_ratio;
FT_Long y_ratio;
/* maximum ppem size */
FT_UShort ppem;
/* current ratio */
FT_Long ratio;
FT_Fixed scale;
/* device-specific compensations */
FT_F26Dot6 compensations[4];
FT_Bool valid;
/* `is the glyph rotated?'-flag */
FT_Bool rotated;
/* `is the glyph stretched?'-flag */
FT_Bool stretched;
} TT_Size_Metrics;
/*************************************************************************/
/* */
/* TrueType size class. */
/* */
typedef struct TT_SizeRec_
{
FT_SizeRec root;
/* we have our own copy of metrics so that we can modify */
/* it without affecting auto-hinting (when used) */
FT_Size_Metrics metrics;
TT_Size_Metrics ttmetrics;
/* 0xFFFFFFFF to indicate invalid */
FT_ULong strike_index;
/* number of function definitions */
FT_UInt num_function_defs;
FT_UInt max_function_defs;
/* table of function definitions */
TT_DefArray function_defs;
/* number of ins. definitions */
FT_UInt num_instruction_defs;
FT_UInt max_instruction_defs;
/* table of ins. definitions */
TT_DefArray instruction_defs;
FT_UInt max_func;
FT_UInt max_ins;
TT_CodeRangeTable codeRangeTable;
TT_GraphicsState GS;
/* the scaled control value table */
FT_ULong cvt_size;
FT_Long* cvt;
/* The storage area is now part of */
FT_UShort storage_size;
/* the instance */
FT_Long* storage;
/* The instance's twilight zone */
TT_GlyphZoneRec twilight;
/* debugging variables */
/* When using the debugger, we must keep the */
/* execution context tied to the instance */
/* object rather than asking it on demand. */
FT_Bool debug;
TT_ExecContext context;
FT_Bool bytecode_ready;
FT_Bool cvt_ready;
FT_Bool ttfautohinted;
} TT_SizeRec;
/*************************************************************************/
/* */
/* TrueType driver class. */
/* */
typedef struct TT_DriverRec_
{
FT_DriverRec root;
/* execution context */
TT_ExecContext context;
/* glyph loader points zone */
TT_GlyphZoneRec zone;
void* extension_component;
} TT_DriverRec;
/* Note: All of the functions below (except tt_size_reset()) are used */
/* as function pointers in a FT_Driver_ClassRec. Therefore their */
/* parameters are of types FT_Face, FT_Size, etc., rather than TT_Face, */
/* TT_Size, etc., so that the compiler can confirm that the types and */
/* number of parameters are correct. In all cases the FT_xxx types are */
/* cast to their TT_xxx counterparts inside the functions since FreeType */
/* will always use the TT driver to create them. */
/*************************************************************************/
/* */
/* Face functions */
/* */
FT_LOCAL( FT_Error )
tt_face_init( FT_Stream stream,
/* TT_Face */
FT_Face ttface,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
FT_LOCAL( void )
/* TT_Face */
tt_face_done( FT_Face ttface );
/*************************************************************************/
/* */
/* Size functions */
/* */
FT_LOCAL( FT_Error )
/* TT_Size */
tt_size_init( FT_Size ttsize );
FT_LOCAL( void )
/* TT_Size */
tt_size_done( FT_Size ttsize );
FT_LOCAL( FT_Error )
tt_size_run_fpgm( TT_Size size,
FT_Bool pedantic );
FT_LOCAL( FT_Error )
tt_size_run_prep( TT_Size size,
FT_Bool pedantic );
FT_LOCAL( FT_Error )
tt_size_ready_bytecode( TT_Size size,
FT_Bool pedantic );
FT_LOCAL( FT_Error )
tt_size_reset( TT_Size size );
/*************************************************************************/
/* */
/* Driver functions */
/* */
FT_LOCAL( FT_Error )
/* TT_Driver */
tt_driver_init( FT_Module ttdriver );
FT_LOCAL( void )
/* TT_Driver */
tt_driver_done( FT_Module ttdriver );
/*************************************************************************/
/* */
/* Slot functions */
/* */
FT_LOCAL( FT_Error )
tt_slot_init( FT_GlyphSlot slot );
/* auxiliary */
#define IS_HINTED( flags ) ( ( flags & FT_LOAD_NO_HINTING ) == 0 )
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ttinterp.h */
/* */
/* TrueType bytecode interpreter (specification). */
/* */
/* Copyright 1996-2007, 2010, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTINTERP_H__
FT_BEGIN_HEADER
/* indirect implementation */
#ifndef TT_CONFIG_OPTION_STATIC_INTERPRETER
#define EXEC_OP_ TT_ExecContext exc,
#define EXEC_OP TT_ExecContext exc
#define EXEC_ARG_ exc,
#define EXEC_ARG exc
/* static implementation */
#else
/* void */
#define EXEC_OP_
/* void */
#define EXEC_OP
/* void */
#define EXEC_ARG_
/* void */
#define EXEC_ARG
/* TT_CONFIG_OPTION_STATIC_INTERPRETER */
#endif
/*************************************************************************/
/* */
/* Rounding mode constants. */
/* */
#define TT_Round_Off 5
#define TT_Round_To_Half_Grid 0
#define TT_Round_To_Grid 1
#define TT_Round_To_Double_Grid 2
#define TT_Round_Up_To_Grid 4
#define TT_Round_Down_To_Grid 3
#define TT_Round_Super 6
#define TT_Round_Super_45 7
/*************************************************************************/
/* */
/* Function types used by the interpreter, depending on various modes */
/* (e.g. the rounding mode, whether to render a vertical or horizontal */
/* line etc). */
/* */
/*************************************************************************/
/* Rounding function */
typedef FT_F26Dot6
(*TT_Round_Func)( EXEC_OP_ FT_F26Dot6 distance,
FT_F26Dot6 compensation );
/* Point displacement along the freedom vector routine */
typedef void
(*TT_Move_Func)( EXEC_OP_ TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance );
/* Distance projection along one of the projection vectors */
typedef FT_F26Dot6
(*TT_Project_Func)( EXEC_OP_ FT_Pos dx,
FT_Pos dy );
/* reading a cvt value. Take care of non-square pixels if necessary */
typedef FT_F26Dot6
(*TT_Get_CVT_Func)( EXEC_OP_ FT_ULong idx );
/* setting or moving a cvt value. Take care of non-square pixels */
/* if necessary */
typedef void
(*TT_Set_CVT_Func)( EXEC_OP_ FT_ULong idx,
FT_F26Dot6 value );
/*************************************************************************/
/* */
/* This structure defines a call record, used to manage function calls. */
/* */
typedef struct TT_CallRec_
{
FT_Int Caller_Range;
FT_Long Caller_IP;
FT_Long Cur_Count;
FT_Long Cur_Restart;
FT_Long Cur_End;
} TT_CallRec, *TT_CallStack;
/*************************************************************************/
/* */
/* The main structure for the interpreter which collects all necessary */
/* variables and states. */
/* */
typedef struct TT_ExecContextRec_
{
TT_Face face;
TT_Size size;
FT_Memory memory;
/* instructions state */
/* last execution error */
FT_Error error;
/* top of exec. stack */
FT_Long top;
/* size of exec. stack */
FT_UInt stackSize;
/* current exec. stack */
FT_Long* stack;
FT_Long args;
/* new top after exec. */
FT_UInt new_top;
/* zone records */
TT_GlyphZoneRec zp0,
zp1,
zp2,
pts,
twilight;
FT_Size_Metrics metrics;
/* size metrics */
TT_Size_Metrics tt_metrics;
/* current graphics state */
TT_GraphicsState GS;
/* current code range number */
FT_Int curRange;
/* current code range */
FT_Byte* code;
/* current instruction pointer */
FT_Long IP;
/* size of current range */
FT_Long codeSize;
/* current opcode */
FT_Byte opcode;
/* length of current opcode */
FT_Int length;
/* true if the interpreter must */
FT_Bool step_ins;
/* increment IP after ins. exec */
FT_ULong cvtSize;
FT_Long* cvt;
/* glyph instructions buffer size */
FT_UInt glyphSize;
/* glyph instructions buffer */
FT_Byte* glyphIns;
/* number of function defs */
FT_UInt numFDefs;
/* maximum number of function defs */
FT_UInt maxFDefs;
/* table of FDefs entries */
TT_DefArray FDefs;
/* number of instruction defs */
FT_UInt numIDefs;
/* maximum number of ins defs */
FT_UInt maxIDefs;
/* table of IDefs entries */
TT_DefArray IDefs;
/* maximum function index */
FT_UInt maxFunc;
/* maximum instruction index */
FT_UInt maxIns;
/* top of call stack during execution */
FT_Int callTop,
/* size of call stack */
callSize;
/* call stack */
TT_CallStack callStack;
/* capacity of this context's `pts' */
FT_UShort maxPoints;
/* record, expressed in points and */
FT_Short maxContours;
/* contours. */
/* table of valid code ranges */
TT_CodeRangeTable codeRangeTable;
/* useful for the debugger */
/* size of current storage */
FT_UShort storeSize;
/* storage area */
FT_Long* storage;
/* values used for the */
FT_F26Dot6 period;
/* `SuperRounding' */
FT_F26Dot6 phase;
FT_F26Dot6 threshold;
#if 0
/* this seems to be unused */
/* ppem along the current proj vector */
FT_Int cur_ppem;
#endif
/* If `True', the interpreter will */
FT_Bool instruction_trap;
/* exit after each instruction */
/* graphics state resulting from */
TT_GraphicsState default_GS;
/* the prep program */
/* true if the glyph is composite */
FT_Bool is_composite;
/* true if pedantic interpretation */
FT_Bool pedantic_hinting;
/* latest interpreter additions */
/* dot product of freedom and projection */
FT_Long F_dot_P;
/* vectors */
/* current rounding function */
TT_Round_Func func_round;
/* current projection function */
TT_Project_Func func_project,
/* current dual proj. function */
func_dualproj,
/* current freedom proj. func */
func_freeProj;
/* current point move function */
TT_Move_Func func_move;
/* move original position function */
TT_Move_Func func_move_orig;
/* read a cvt entry */
TT_Get_CVT_Func func_read_cvt;
/* write a cvt entry (in pixels) */
TT_Set_CVT_Func func_write_cvt;
/* incr a cvt entry (in pixels) */
TT_Set_CVT_Func func_move_cvt;
/* are we hinting for grayscale? */
FT_Bool grayscale;
} TT_ExecContextRec;
extern const TT_GraphicsState tt_default_graphics_state;
FT_LOCAL( FT_Error )
TT_Goto_CodeRange( TT_ExecContext exec,
FT_Int range,
FT_Long IP );
FT_LOCAL( FT_Error )
TT_Set_CodeRange( TT_ExecContext exec,
FT_Int range,
void* base,
FT_Long length );
FT_LOCAL( FT_Error )
TT_Clear_CodeRange( TT_ExecContext exec,
FT_Int range );
FT_LOCAL( FT_Error )
Update_Max( FT_Memory memory,
FT_ULong* size,
FT_Long multiplier,
void* _pbuff,
FT_ULong new_max );
/*************************************************************************/
/* */
/* <Function> */
/* TT_New_Context */
/* */
/* <Description> */
/* Queries the face context for a given font. Note that there is */
/* now a _single_ execution context in the TrueType driver which is */
/* shared among faces. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* <Return> */
/* A handle to the execution context. Initialized for `face'. */
/* */
/* <Note> */
/* Only the glyph loader and debugger should call this function. */
/* */
FT_EXPORT( TT_ExecContext )
TT_New_Context( TT_Driver driver );
FT_LOCAL( FT_Error )
TT_Done_Context( TT_ExecContext exec );
FT_LOCAL( FT_Error )
TT_Load_Context( TT_ExecContext exec,
TT_Face face,
TT_Size size );
FT_LOCAL( FT_Error )
TT_Save_Context( TT_ExecContext exec,
TT_Size ins );
FT_LOCAL( FT_Error )
TT_Run_Context( TT_ExecContext exec,
FT_Bool debug );
/*************************************************************************/
/* */
/* <Function> */
/* TT_RunIns */
/* */
/* <Description> */
/* Executes one or more instruction in the execution context. This */
/* is the main function of the TrueType opcode interpreter. */
/* */
/* <Input> */
/* exec :: A handle to the target execution context. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* Only the object manager and debugger should call this function. */
/* */
/* This function is publicly exported because it is directly */
/* invoked by the TrueType debugger. */
/* */
FT_EXPORT( FT_Error )
TT_RunIns( TT_ExecContext exec );
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
FT_LOCAL( void )
TT_Init_Glyph_Loading( TT_Face face );
FT_LOCAL( void )
TT_Get_HMetrics( TT_Face face,
FT_UInt idx,
FT_Short* lsb,
FT_UShort* aw );
FT_LOCAL( void )
TT_Get_VMetrics( TT_Face face,
FT_UInt idx,
FT_Short* tsb,
FT_UShort* ah );
FT_LOCAL( FT_Error )
TT_Load_Glyph( TT_Size size,
TT_GlyphSlot glyph,
FT_UInt glyph_index,
FT_Int32 load_flags );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ttpload.h */
/* */
/* TrueType-specific tables loader (specification). */
/* */
/* Copyright 1996-2001, 2002, 2005, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTPLOAD_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
tt_face_load_loca( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_ULong )
tt_face_get_location( TT_Face face,
FT_UInt gindex,
FT_UInt *asize );
FT_LOCAL( void )
tt_face_done_loca( TT_Face face );
FT_LOCAL( FT_Error )
tt_face_load_cvt( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_fpgm( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_prep( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
tt_face_load_hdmx( TT_Face face,
FT_Stream stream );
FT_LOCAL( void )
tt_face_free_hdmx( TT_Face face );
FT_LOCAL( FT_Byte* )
tt_face_get_device_metrics( TT_Face face,
FT_UInt ppem,
FT_UInt gindex );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ttgxvar.h */
/* */
/* TrueType GX Font Variation loader (specification) */
/* */
/* Copyright 2004 by */
/* David Turner, Robert Wilhelm, Werner Lemberg and George Williams. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTGXVAR_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Struct> */
/* GX_AVarCorrespondenceRec */
/* */
/* <Description> */
/* A data structure representing `shortFracCorrespondence' in `avar' */
/* table according to the specifications from Apple. */
/* */
typedef struct GX_AVarCorrespondenceRec_
{
FT_Fixed fromCoord;
FT_Fixed toCoord;
} GX_AVarCorrespondenceRec_, *GX_AVarCorrespondence;
/*************************************************************************/
/* */
/* <Struct> */
/* GX_AVarRec */
/* */
/* <Description> */
/* Data from the segment field of `avar' table. */
/* There is one of these for each axis. */
/* */
typedef struct GX_AVarSegmentRec_
{
FT_UShort pairCount;
/* array with pairCount entries */
GX_AVarCorrespondence correspondence;
} GX_AVarSegmentRec, *GX_AVarSegment;
/*************************************************************************/
/* */
/* <Struct> */
/* GX_BlendRec */
/* */
/* <Description> */
/* Data for interpolating a font from a distortable font specified */
/* by the GX *var tables ([fgca]var). */
/* */
/* <Fields> */
/* num_axis :: The number of axes along which interpolation */
/* may happen */
/* */
/* normalizedcoords :: A normalized value (between [-1,1]) indicating */
/* the contribution along each axis to the final */
/* interpolated font. */
/* */
typedef struct GX_BlendRec_
{
FT_UInt num_axis;
FT_Fixed* normalizedcoords;
FT_MM_Var* mmvar;
FT_Offset mmvar_len;
FT_Bool avar_checked;
GX_AVarSegment avar_segment;
/* shared tuples in `gvar' */
FT_UInt tuplecount;
/* tuplecoords[tuplecount][num_axis] */
FT_Fixed* tuplecoords;
FT_UInt gv_glyphcnt;
FT_ULong* glyphoffsets;
} GX_BlendRec;
/*************************************************************************/
/* */
/* <enum> */
/* GX_TupleCountFlags */
/* */
/* <Description> */
/* Flags used within the `TupleCount' field of the `gvar' table. */
/* */
typedef enum GX_TupleCountFlags_
{
GX_TC_TUPLES_SHARE_POINT_NUMBERS = 0x8000,
GX_TC_RESERVED_TUPLE_FLAGS = 0x7000,
GX_TC_TUPLE_COUNT_MASK = 0x0FFF
} GX_TupleCountFlags;
/*************************************************************************/
/* */
/* <enum> */
/* GX_TupleIndexFlags */
/* */
/* <Description> */
/* Flags used within the `TupleIndex' field of the `gvar' and `cvar' */
/* tables. */
/* */
typedef enum GX_TupleIndexFlags_
{
GX_TI_EMBEDDED_TUPLE_COORD = 0x8000,
GX_TI_INTERMEDIATE_TUPLE = 0x4000,
GX_TI_PRIVATE_POINT_NUMBERS = 0x2000,
GX_TI_RESERVED_TUPLE_FLAG = 0x1000,
GX_TI_TUPLE_INDEX_MASK = 0x0FFF
} GX_TupleIndexFlags;
#define TTAG_wght FT_MAKE_TAG( 'w', 'g', 'h', 't' )
#define TTAG_wdth FT_MAKE_TAG( 'w', 'd', 't', 'h' )
#define TTAG_opsz FT_MAKE_TAG( 'o', 'p', 's', 'z' )
#define TTAG_slnt FT_MAKE_TAG( 's', 'l', 'n', 't' )
FT_LOCAL( FT_Error )
TT_Set_MM_Blend( TT_Face face,
FT_UInt num_coords,
FT_Fixed* coords );
FT_LOCAL( FT_Error )
TT_Set_Var_Design( TT_Face face,
FT_UInt num_coords,
FT_Fixed* coords );
FT_LOCAL( FT_Error )
TT_Get_MM_Var( TT_Face face,
FT_MM_Var* *master );
FT_LOCAL( FT_Error )
tt_face_vary_cvt( TT_Face face,
FT_Stream stream );
FT_LOCAL( FT_Error )
TT_Vary_Get_Glyph_Deltas( TT_Face face,
FT_UInt glyph_index,
FT_Vector* *deltas,
FT_UInt n_points );
FT_LOCAL( void )
tt_done_blend( FT_Memory memory,
GX_Blend blend );
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttdriver
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** F A C E S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
#undef PAIR_TAG
#define PAIR_TAG( left, right ) ( ( (FT_ULong)left << 16 ) | \
(FT_ULong)right )
/*************************************************************************/
/* */
/* <Function> */
/* tt_get_kerning */
/* */
/* <Description> */
/* A driver method used to return the kerning vector between two */
/* glyphs of the same face. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* left_glyph :: The index of the left glyph in the kern pair. */
/* */
/* right_glyph :: The index of the right glyph in the kern pair. */
/* */
/* <Output> */
/* kerning :: The kerning vector. This is in font units for */
/* scalable formats, and in pixels for fixed-sizes */
/* formats. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* Only horizontal layouts (left-to-right & right-to-left) are */
/* supported by this function. Other layouts, or more sophisticated */
/* kernings, are out of scope of this method (the basic driver */
/* interface is meant to be simple). */
/* */
/* They can be implemented by format-specific interfaces. */
/* */
static FT_Error
/* TT_Face */
tt_get_kerning( FT_Face ttface,
FT_UInt left_glyph,
FT_UInt right_glyph,
FT_Vector* kerning )
{
TT_Face face = (TT_Face)ttface;
SFNT_Service sfnt = (SFNT_Service)face->sfnt;
kerning->x = 0;
kerning->y = 0;
if ( sfnt )
kerning->x = sfnt->get_kerning( face, left_glyph, right_glyph );
return 0;
}
#undef PAIR_TAG
static FT_Error
tt_get_advances( FT_Face ttface,
FT_UInt start,
FT_UInt count,
FT_Int32 flags,
FT_Fixed *advances )
{
FT_UInt nn;
TT_Face face = (TT_Face) ttface;
/* XXX: TODO: check for sbits */
if ( flags & FT_LOAD_VERTICAL_LAYOUT )
{
for ( nn = 0; nn < count; nn++ )
{
FT_Short tsb;
FT_UShort ah;
TT_Get_VMetrics( face, start + nn, &tsb, &ah );
advances[nn] = ah;
}
}
else
{
for ( nn = 0; nn < count; nn++ )
{
FT_Short lsb;
FT_UShort aw;
TT_Get_HMetrics( face, start + nn, &lsb, &aw );
advances[nn] = aw;
}
}
return TT_Err_Ok;
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** S I Z E S ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
static FT_Error
tt_size_select( FT_Size size,
FT_ULong strike_index )
{
TT_Face ttface = (TT_Face)size->face;
TT_Size ttsize = (TT_Size)size;
FT_Error error = TT_Err_Ok;
ttsize->strike_index = strike_index;
if ( FT_IS_SCALABLE( size->face ) )
{
/* use the scaled metrics, even when tt_size_reset fails */
FT_Select_Metrics( size->face, strike_index );
tt_size_reset( ttsize );
}
else
{
SFNT_Service sfnt = (SFNT_Service) ttface->sfnt;
FT_Size_Metrics* metrics = &size->metrics;
error = sfnt->load_strike_metrics( ttface, strike_index, metrics );
if ( error )
ttsize->strike_index = 0xFFFFFFFFUL;
}
return error;
}
static FT_Error
tt_size_request( FT_Size size,
FT_Size_Request req )
{
TT_Size ttsize = (TT_Size)size;
FT_Error error = TT_Err_Ok;
if ( FT_HAS_FIXED_SIZES( size->face ) )
{
TT_Face ttface = (TT_Face)size->face;
SFNT_Service sfnt = (SFNT_Service) ttface->sfnt;
FT_ULong strike_index;
error = sfnt->set_sbit_strike( ttface, req, &strike_index );
if ( error )
ttsize->strike_index = 0xFFFFFFFFUL;
else
return tt_size_select( size, strike_index );
}
FT_Request_Metrics( size->face, req );
if ( FT_IS_SCALABLE( size->face ) )
{
error = tt_size_reset( ttsize );
ttsize->root.metrics = ttsize->metrics;
}
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_glyph_load */
/* */
/* <Description> */
/* A driver method used to load a glyph within a given glyph slot. */
/* */
/* <Input> */
/* slot :: A handle to the target slot object where the glyph */
/* will be loaded. */
/* */
/* size :: A handle to the source face size at which the glyph */
/* must be scaled, loaded, etc. */
/* */
/* glyph_index :: The index of the glyph in the font file. */
/* */
/* load_flags :: A flag indicating what to load for this glyph. The */
/* FT_LOAD_XXX constants can be used to control the */
/* glyph loading process (e.g., whether the outline */
/* should be scaled, whether to load bitmaps or not, */
/* whether to hint the outline, etc). */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
static FT_Error
/* TT_GlyphSlot */
tt_glyph_load( FT_GlyphSlot ttslot,
/* TT_Size */
FT_Size ttsize,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
TT_GlyphSlot slot = (TT_GlyphSlot)ttslot;
TT_Size size = (TT_Size)ttsize;
FT_Face face = ttslot->face;
FT_Error error;
if ( !slot )
return TT_Err_Invalid_Slot_Handle;
if ( !size )
return TT_Err_Invalid_Size_Handle;
if ( !face )
return TT_Err_Invalid_Argument;
if ( glyph_index >= (FT_UInt)face->num_glyphs &&
!face->internal->incremental_interface )
return TT_Err_Invalid_Argument;
if ( load_flags & FT_LOAD_NO_HINTING )
{
/* both FT_LOAD_NO_HINTING and FT_LOAD_NO_AUTOHINT */
/* are necessary to disable hinting for tricky fonts */
if ( FT_IS_TRICKY( face ) )
load_flags &= ~FT_LOAD_NO_HINTING;
if ( load_flags & FT_LOAD_NO_AUTOHINT )
load_flags |= FT_LOAD_NO_HINTING;
}
if ( load_flags & ( FT_LOAD_NO_RECURSE | FT_LOAD_NO_SCALE ) )
{
load_flags |= FT_LOAD_NO_BITMAP | FT_LOAD_NO_SCALE;
if ( !FT_IS_TRICKY( face ) )
load_flags |= FT_LOAD_NO_HINTING;
}
/* now load the glyph outline if necessary */
error = TT_Load_Glyph( size, slot, glyph_index, load_flags );
/* force drop-out mode to 2 - irrelevant now */
/* slot->outline.dropout_mode = 2; */
return error;
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** ****/
/**** D R I V E R I N T E R F A C E ****/
/**** ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
FT_DEFINE_SERVICE_MULTIMASTERSREC(
tt_service_gx_multi_masters,
(FT_Get_MM_Func) NULL,
(FT_Set_MM_Design_Func) NULL,
(FT_Set_MM_Blend_Func) TT_Set_MM_Blend,
(FT_Get_MM_Var_Func) TT_Get_MM_Var,
(FT_Set_Var_Design_Func)TT_Set_Var_Design )
static const FT_Service_TrueTypeEngineRec tt_service_truetype_engine =
{
FT_TRUETYPE_ENGINE_TYPE_PATENTED
};
FT_DEFINE_SERVICE_TTGLYFREC(
tt_service_truetype_glyf,
(TT_Glyf_GetLocationFunc)tt_face_get_location )
FT_DEFINE_SERVICEDESCREC4(
tt_services,
FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_TRUETYPE,
FT_SERVICE_ID_MULTI_MASTERS, &TT_SERVICE_GX_MULTI_MASTERS_GET,
FT_SERVICE_ID_TRUETYPE_ENGINE, &tt_service_truetype_engine,
FT_SERVICE_ID_TT_GLYF, &TT_SERVICE_TRUETYPE_GLYF_GET )
FT_CALLBACK_DEF( FT_Module_Interface )
/* TT_Driver */
tt_get_interface( FT_Module driver,
const char* tt_interface )
{
FT_Library library;
FT_Module_Interface result;
FT_Module sfntd;
SFNT_Service sfnt;
/* TT_SERVICES_GET derefers `library' in PIC mode */
result = ft_service_list_lookup( TT_SERVICES_GET, tt_interface );
if ( result != NULL )
return result;
if ( !driver )
return NULL;
library = driver->library;
if ( !library )
return NULL;
/* only return the default interface from the SFNT module */
sfntd = FT_Get_Module( library, "sfnt" );
if ( sfntd )
{
sfnt = (SFNT_Service)( sfntd->clazz->module_interface );
if ( sfnt )
return sfnt->get_interface( driver, tt_interface );
}
return 0;
}
/* The FT_DriverInterface structure is defined in ftdriver.h. */
#define TT_HINTER_FLAG FT_MODULE_DRIVER_HAS_HINTER
#define TT_SIZE_SELECT tt_size_select
FT_DEFINE_DRIVER( tt_driver_class,
FT_MODULE_FONT_DRIVER |
FT_MODULE_DRIVER_SCALABLE |
TT_HINTER_FLAG,
sizeof ( TT_DriverRec ),
/* driver name */
"truetype",
/* driver version == 1.0 */
0x10000L,
/* driver requires FreeType 2.0 or above */
0x20000L,
/* driver specific interface */
(void*)0,
tt_driver_init,
tt_driver_done,
tt_get_interface,
sizeof ( TT_FaceRec ),
sizeof ( TT_SizeRec ),
sizeof ( FT_GlyphSlotRec ),
tt_face_init,
tt_face_done,
tt_size_init,
tt_size_done,
tt_slot_init,
/* FT_Slot_DoneFunc */
0,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
ft_stub_set_char_sizes,
/* FT_CONFIG_OPTION_OLD_INTERNALS */
ft_stub_set_pixel_sizes,
tt_glyph_load,
tt_get_kerning,
/* FT_Face_AttachFunc */
0,
tt_get_advances,
tt_size_request,
TT_SIZE_SELECT
)
/* END */
/* tables loader */
/***************************************************************************/
/* */
/* ttpload.c */
/* */
/* TrueType-specific tables loader (body). */
/* */
/* Copyright 1996-2002, 2004-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttpload
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_loca */
/* */
/* <Description> */
/* Load the locations table. */
/* */
/* <InOut> */
/* face :: A handle to the target face object. */
/* */
/* <Input> */
/* stream :: The input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_loca( TT_Face face,
FT_Stream stream )
{
FT_Error error;
FT_ULong table_len;
FT_Int shift;
/* we need the size of the `glyf' table for malformed `loca' tables */
error = face->goto_table( face, TTAG_glyf, stream, &face->glyf_len );
/* it is possible that a font doesn't have a glyf table at all */
/* or its size is zero */
if ( error == TT_Err_Table_Missing )
face->glyf_len = 0;
else if ( error )
goto Exit;
FT_TRACE2(( "Locations " ));
error = face->goto_table( face, TTAG_loca, stream, &table_len );
if ( error )
{
error = TT_Err_Locations_Missing;
goto Exit;
}
if ( face->header.Index_To_Loc_Format != 0 )
{
shift = 2;
if ( table_len >= 0x40000L )
{
FT_TRACE2(( "table too large\n" ));
error = TT_Err_Invalid_Table;
goto Exit;
}
face->num_locations = table_len >> shift;
}
else
{
shift = 1;
if ( table_len >= 0x20000L )
{
FT_TRACE2(( "table too large\n" ));
error = TT_Err_Invalid_Table;
goto Exit;
}
face->num_locations = table_len >> shift;
}
if ( face->num_locations != (FT_ULong)face->root.num_glyphs + 1 )
{
FT_TRACE2(( "glyph count mismatch! loca: %d, maxp: %d\n",
face->num_locations - 1, face->root.num_glyphs ));
/* we only handle the case where `maxp' gives a larger value */
if ( face->num_locations <= (FT_ULong)face->root.num_glyphs )
{
FT_Long new_loca_len =
( (FT_Long)( face->root.num_glyphs ) + 1 ) << shift;
TT_Table entry = face->dir_tables;
TT_Table limit = entry + face->num_tables;
FT_Long pos = FT_Stream_Pos( stream );
FT_Long dist = 0x7FFFFFFFL;
/* compute the distance to next table in font file */
for ( ; entry < limit; entry++ )
{
FT_Long diff = entry->Offset - pos;
if ( diff > 0 && diff < dist )
dist = diff;
}
if ( entry == limit )
{
/* `loca' is the last table */
dist = stream->size - pos;
}
if ( new_loca_len <= dist )
{
face->num_locations = face->root.num_glyphs + 1;
table_len = new_loca_len;
FT_TRACE2(( "adjusting num_locations to %d\n",
face->num_locations ));
}
}
}
/*
* Extract the frame. We don't need to decompress it since
* we are able to parse it directly.
*/
if ( FT_FRAME_EXTRACT( table_len, face->glyph_locations ) )
goto Exit;
FT_TRACE2(( "loaded\n" ));
Exit:
return error;
}
FT_LOCAL_DEF( FT_ULong )
tt_face_get_location( TT_Face face,
FT_UInt gindex,
FT_UInt *asize )
{
FT_ULong pos1, pos2;
FT_Byte* p;
FT_Byte* p_limit;
pos1 = pos2 = 0;
if ( gindex < face->num_locations )
{
if ( face->header.Index_To_Loc_Format != 0 )
{
p = face->glyph_locations + gindex * 4;
p_limit = face->glyph_locations + face->num_locations * 4;
pos1 = FT_NEXT_ULONG( p );
pos2 = pos1;
if ( p + 4 <= p_limit )
pos2 = FT_NEXT_ULONG( p );
}
else
{
p = face->glyph_locations + gindex * 2;
p_limit = face->glyph_locations + face->num_locations * 2;
pos1 = FT_NEXT_USHORT( p );
pos2 = pos1;
if ( p + 2 <= p_limit )
pos2 = FT_NEXT_USHORT( p );
pos1 <<= 1;
pos2 <<= 1;
}
}
/* Check broken location data */
if ( pos1 > face->glyf_len )
{
FT_TRACE1(( "tt_face_get_location:"
" too large offset=0x%08lx found for gid=0x%04lx,"
" exceeding the end of glyf table (0x%08lx)\n",
pos1, gindex, face->glyf_len ));
*asize = 0;
return 0;
}
if ( pos2 > face->glyf_len )
{
FT_TRACE1(( "tt_face_get_location:"
" too large offset=0x%08lx found for gid=0x%04lx,"
" truncate at the end of glyf table (0x%08lx)\n",
pos2, gindex + 1, face->glyf_len ));
pos2 = face->glyf_len;
}
/* The `loca' table must be ordered; it refers to the length of */
/* an entry as the difference between the current and the next */
/* position. However, there do exist (malformed) fonts which */
/* don't obey this rule, so we are only able to provide an */
/* upper bound for the size. */
/* */
/* We get (intentionally) a wrong, non-zero result in case the */
/* `glyf' table is missing. */
if ( pos2 >= pos1 )
*asize = (FT_UInt)( pos2 - pos1 );
else
*asize = (FT_UInt)( face->glyf_len - pos1 );
return pos1;
}
FT_LOCAL_DEF( void )
tt_face_done_loca( TT_Face face )
{
FT_Stream stream = face->root.stream;
FT_FRAME_RELEASE( face->glyph_locations );
face->num_locations = 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_cvt */
/* */
/* <Description> */
/* Load the control value table into a face object. */
/* */
/* <InOut> */
/* face :: A handle to the target face object. */
/* */
/* <Input> */
/* stream :: A handle to the input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_cvt( TT_Face face,
FT_Stream stream )
{
FT_Error error;
FT_Memory memory = stream->memory;
FT_ULong table_len;
FT_TRACE2(( "CVT " ));
error = face->goto_table( face, TTAG_cvt, stream, &table_len );
if ( error )
{
FT_TRACE2(( "is missing\n" ));
face->cvt_size = 0;
face->cvt = NULL;
error = TT_Err_Ok;
goto Exit;
}
face->cvt_size = table_len / 2;
if ( FT_NEW_ARRAY( face->cvt, face->cvt_size ) )
goto Exit;
if ( FT_FRAME_ENTER( face->cvt_size * 2L ) )
goto Exit;
{
FT_Short* cur = face->cvt;
FT_Short* limit = cur + face->cvt_size;
for ( ; cur < limit; cur++ )
*cur = FT_GET_SHORT();
}
FT_FRAME_EXIT();
FT_TRACE2(( "loaded\n" ));
if ( face->doblend )
error = tt_face_vary_cvt( face, stream );
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_fpgm */
/* */
/* <Description> */
/* Load the font program. */
/* */
/* <InOut> */
/* face :: A handle to the target face object. */
/* */
/* <Input> */
/* stream :: A handle to the input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_fpgm( TT_Face face,
FT_Stream stream )
{
FT_Error error;
FT_ULong table_len;
FT_TRACE2(( "Font program " ));
/* The font program is optional */
error = face->goto_table( face, TTAG_fpgm, stream, &table_len );
if ( error )
{
face->font_program = NULL;
face->font_program_size = 0;
error = TT_Err_Ok;
FT_TRACE2(( "is missing\n" ));
}
else
{
face->font_program_size = table_len;
if ( FT_FRAME_EXTRACT( table_len, face->font_program ) )
goto Exit;
FT_TRACE2(( "loaded, %12d bytes\n", face->font_program_size ));
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_prep */
/* */
/* <Description> */
/* Load the cvt program. */
/* */
/* <InOut> */
/* face :: A handle to the target face object. */
/* */
/* <Input> */
/* stream :: A handle to the input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_prep( TT_Face face,
FT_Stream stream )
{
FT_Error error;
FT_ULong table_len;
FT_TRACE2(( "Prep program " ));
error = face->goto_table( face, TTAG_prep, stream, &table_len );
if ( error )
{
face->cvt_program = NULL;
face->cvt_program_size = 0;
error = TT_Err_Ok;
FT_TRACE2(( "is missing\n" ));
}
else
{
face->cvt_program_size = table_len;
if ( FT_FRAME_EXTRACT( table_len, face->cvt_program ) )
goto Exit;
FT_TRACE2(( "loaded, %12d bytes\n", face->cvt_program_size ));
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_load_hdmx */
/* */
/* <Description> */
/* Load the `hdmx' table into the face object. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* stream :: A handle to the input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_load_hdmx( TT_Face face,
FT_Stream stream )
{
FT_Error error;
FT_Memory memory = stream->memory;
FT_UInt version, nn, num_records;
FT_ULong table_size, record_size;
FT_Byte* p;
FT_Byte* limit;
/* this table is optional */
error = face->goto_table( face, TTAG_hdmx, stream, &table_size );
if ( error || table_size < 8 )
return TT_Err_Ok;
if ( FT_FRAME_EXTRACT( table_size, face->hdmx_table ) )
goto Exit;
p = face->hdmx_table;
limit = p + table_size;
version = FT_NEXT_USHORT( p );
num_records = FT_NEXT_USHORT( p );
record_size = FT_NEXT_ULONG( p );
/* The maximum number of bytes in an hdmx device record is the */
/* maximum number of glyphs + 2; this is 0xFFFF + 2; this is */
/* the reason why `record_size' is a long (which we read as */
/* unsigned long for convenience). In practice, two bytes */
/* sufficient to hold the size value. */
/* */
/* There are at least two fonts, HANNOM-A and HANNOM-B version */
/* 2.0 (2005), which get this wrong: The upper two bytes of */
/* the size value are set to 0xFF instead of 0x00. We catch */
/* and fix this. */
if ( record_size >= 0xFFFF0000UL )
record_size &= 0xFFFFU;
/* The limit for `num_records' is a heuristic value. */
if ( version != 0 || num_records > 255 || record_size > 0x10001L )
{
error = TT_Err_Invalid_File_Format;
goto Fail;
}
if ( FT_NEW_ARRAY( face->hdmx_record_sizes, num_records ) )
goto Fail;
for ( nn = 0; nn < num_records; nn++ )
{
if ( p + record_size > limit )
break;
face->hdmx_record_sizes[nn] = p[0];
p += record_size;
}
face->hdmx_record_count = nn;
face->hdmx_table_size = table_size;
face->hdmx_record_size = record_size;
Exit:
return error;
Fail:
FT_FRAME_RELEASE( face->hdmx_table );
face->hdmx_table_size = 0;
goto Exit;
}
FT_LOCAL_DEF( void )
tt_face_free_hdmx( TT_Face face )
{
FT_Stream stream = face->root.stream;
FT_Memory memory = stream->memory;
FT_FREE( face->hdmx_record_sizes );
FT_FRAME_RELEASE( face->hdmx_table );
}
/*************************************************************************/
/* */
/* Return the advance width table for a given pixel size if it is found */
/* in the font's `hdmx' table (if any). */
/* */
FT_LOCAL_DEF( FT_Byte* )
tt_face_get_device_metrics( TT_Face face,
FT_UInt ppem,
FT_UInt gindex )
{
FT_UInt nn;
FT_Byte* result = NULL;
FT_ULong record_size = face->hdmx_record_size;
FT_Byte* record = face->hdmx_table + 8;
for ( nn = 0; nn < face->hdmx_record_count; nn++ )
if ( face->hdmx_record_sizes[nn] == ppem )
{
gindex += 2;
if ( gindex < record_size )
result = record + nn * record_size + gindex;
break;
}
return result;
}
/* END */
/* glyph loader */
/***************************************************************************/
/* */
/* ttgload.c */
/* */
/* TrueType Glyph Loader (body). */
/* */
/* Copyright 1996-2012 */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ttsubpix.h */
/* */
/* TrueType Subpixel Hinting. */
/* */
/* Copyright 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __TTSUBPIX_H__
FT_BEGIN_HEADER
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttgload
/*************************************************************************/
/* */
/* Composite glyph flags. */
/* */
#define ARGS_ARE_WORDS 0x0001
#define ARGS_ARE_XY_VALUES 0x0002
#define ROUND_XY_TO_GRID 0x0004
#define WE_HAVE_A_SCALE 0x0008
/* reserved 0x0010 */
#define MORE_COMPONENTS 0x0020
#define WE_HAVE_AN_XY_SCALE 0x0040
#define WE_HAVE_A_2X2 0x0080
#define WE_HAVE_INSTR 0x0100
#define USE_MY_METRICS 0x0200
#define OVERLAP_COMPOUND 0x0400
#define SCALED_COMPONENT_OFFSET 0x0800
#define UNSCALED_COMPONENT_OFFSET 0x1000
/*************************************************************************/
/* */
/* Return the horizontal metrics in font units for a given glyph. */
/* */
FT_LOCAL_DEF( void )
TT_Get_HMetrics( TT_Face face,
FT_UInt idx,
FT_Short* lsb,
FT_UShort* aw )
{
( (SFNT_Service)face->sfnt )->get_metrics( face, 0, idx, lsb, aw );
FT_TRACE5(( " advance width (font units): %d\n", *aw ));
FT_TRACE5(( " left side bearing (font units): %d\n", *lsb ));
}
/*************************************************************************/
/* */
/* Return the vertical metrics in font units for a given glyph. */
/* Greg Hitchcock from Microsoft told us that if there were no `vmtx' */
/* table, typoAscender/Descender from the `OS/2' table would be used */
/* instead, and if there were no `OS/2' table, use ascender/descender */
/* from the `hhea' table. But that is not what Microsoft's rasterizer */
/* apparently does: It uses the ppem value as the advance height, and */
/* sets the top side bearing to be zero. */
/* */
FT_LOCAL_DEF( void )
TT_Get_VMetrics( TT_Face face,
FT_UInt idx,
FT_Short* tsb,
FT_UShort* ah )
{
if ( face->vertical_info )
( (SFNT_Service)face->sfnt )->get_metrics( face, 1, idx, tsb, ah );
/* Empirically determined, at variance with what MS said */
#if 1
else
{
*tsb = 0;
*ah = face->root.units_per_EM;
}
/* This is what MS said to do. It isn't what they do, however. */
#else
else if ( face->os2.version != 0xFFFFU )
{
*tsb = face->os2.sTypoAscender;
*ah = face->os2.sTypoAscender - face->os2.sTypoDescender;
}
else
{
*tsb = face->horizontal.Ascender;
*ah = face->horizontal.Ascender - face->horizontal.Descender;
}
#endif
FT_TRACE5(( " advance height (font units): %d\n", *ah ));
FT_TRACE5(( " top side bearing (font units): %d\n", *tsb ));
}
static void
tt_get_metrics( TT_Loader loader,
FT_UInt glyph_index )
{
TT_Face face = (TT_Face)loader->face;
FT_Short left_bearing = 0, top_bearing = 0;
FT_UShort advance_width = 0, advance_height = 0;
TT_Get_HMetrics( face, glyph_index,
&left_bearing,
&advance_width );
TT_Get_VMetrics( face, glyph_index,
&top_bearing,
&advance_height );
loader->left_bearing = left_bearing;
loader->advance = advance_width;
loader->top_bearing = top_bearing;
loader->vadvance = advance_height;
if ( !loader->linear_def )
{
loader->linear_def = 1;
loader->linear = advance_width;
}
}
static void
tt_get_metrics_incr_overrides( TT_Loader loader,
FT_UInt glyph_index )
{
TT_Face face = (TT_Face)loader->face;
FT_Short left_bearing = 0, top_bearing = 0;
FT_UShort advance_width = 0, advance_height = 0;
/* If this is an incrementally loaded font check whether there are */
/* overriding metrics for this glyph. */
if ( face->root.internal->incremental_interface &&
face->root.internal->incremental_interface->funcs->get_glyph_metrics )
{
FT_Incremental_MetricsRec metrics;
FT_Error error;
metrics.bearing_x = loader->left_bearing;
metrics.bearing_y = 0;
metrics.advance = loader->advance;
metrics.advance_v = 0;
error = face->root.internal->incremental_interface->funcs->get_glyph_metrics(
face->root.internal->incremental_interface->object,
glyph_index, FALSE, &metrics );
if ( error )
goto Exit;
left_bearing = (FT_Short)metrics.bearing_x;
advance_width = (FT_UShort)metrics.advance;
#if 0
/* GWW: Do I do the same for vertical metrics? */
metrics.bearing_x = 0;
metrics.bearing_y = loader->top_bearing;
metrics.advance = loader->vadvance;
error = face->root.internal->incremental_interface->funcs->get_glyph_metrics(
face->root.internal->incremental_interface->object,
glyph_index, TRUE, &metrics );
if ( error )
goto Exit;
top_bearing = (FT_Short)metrics.bearing_y;
advance_height = (FT_UShort)metrics.advance;
/* 0 */
#endif
loader->left_bearing = left_bearing;
loader->advance = advance_width;
loader->top_bearing = top_bearing;
loader->vadvance = advance_height;
if ( !loader->linear_def )
{
loader->linear_def = 1;
loader->linear = advance_width;
}
}
Exit:
return;
}
/*************************************************************************/
/* */
/* Translates an array of coordinates. */
/* */
static void
translate_array( FT_UInt n,
FT_Vector* coords,
FT_Pos delta_x,
FT_Pos delta_y )
{
FT_UInt k;
if ( delta_x )
for ( k = 0; k < n; k++ )
coords[k].x += delta_x;
if ( delta_y )
for ( k = 0; k < n; k++ )
coords[k].y += delta_y;
}
/*************************************************************************/
/* */
/* The following functions are used by default with TrueType fonts. */
/* However, they can be replaced by alternatives if we need to support */
/* TrueType-compressed formats (like MicroType) in the future. */
/* */
/*************************************************************************/
FT_CALLBACK_DEF( FT_Error )
TT_Access_Glyph_Frame( TT_Loader loader,
FT_UInt glyph_index,
FT_ULong offset,
FT_UInt byte_count )
{
FT_Error error;
FT_Stream stream = loader->stream;
/* for non-debug mode */
FT_UNUSED( glyph_index );
FT_TRACE4(( "Glyph %ld\n", glyph_index ));
/* the following line sets the `error' variable through macros! */
if ( FT_STREAM_SEEK( offset ) || FT_FRAME_ENTER( byte_count ) )
return error;
loader->cursor = stream->cursor;
loader->limit = stream->limit;
return TT_Err_Ok;
}
FT_CALLBACK_DEF( void )
TT_Forget_Glyph_Frame( TT_Loader loader )
{
FT_Stream stream = loader->stream;
FT_FRAME_EXIT();
}
FT_CALLBACK_DEF( FT_Error )
TT_Load_Glyph_Header( TT_Loader loader )
{
FT_Byte* p = loader->cursor;
FT_Byte* limit = loader->limit;
if ( p + 10 > limit )
return TT_Err_Invalid_Outline;
loader->n_contours = FT_NEXT_SHORT( p );
loader->bbox.xMin = FT_NEXT_SHORT( p );
loader->bbox.yMin = FT_NEXT_SHORT( p );
loader->bbox.xMax = FT_NEXT_SHORT( p );
loader->bbox.yMax = FT_NEXT_SHORT( p );
FT_TRACE5(( " # of contours: %d\n", loader->n_contours ));
FT_TRACE5(( " xMin: %4d xMax: %4d\n", loader->bbox.xMin,
loader->bbox.xMax ));
FT_TRACE5(( " yMin: %4d yMax: %4d\n", loader->bbox.yMin,
loader->bbox.yMax ));
loader->cursor = p;
return TT_Err_Ok;
}
FT_CALLBACK_DEF( FT_Error )
TT_Load_Simple_Glyph( TT_Loader load )
{
FT_Error error;
FT_Byte* p = load->cursor;
FT_Byte* limit = load->limit;
FT_GlyphLoader gloader = load->gloader;
FT_Int n_contours = load->n_contours;
FT_Outline* outline;
TT_Face face = (TT_Face)load->face;
FT_UShort n_ins;
FT_Int n_points;
FT_Byte *flag, *flag_limit;
FT_Byte c, count;
FT_Vector *vec, *vec_limit;
FT_Pos x;
FT_Short *cont, *cont_limit, prev_cont;
FT_Int xy_size = 0;
/* check that we can add the contours to the glyph */
error = FT_GLYPHLOADER_CHECK_POINTS( gloader, 0, n_contours );
if ( error )
goto Fail;
/* reading the contours' endpoints & number of points */
cont = gloader->current.outline.contours;
cont_limit = cont + n_contours;
/* check space for contours array + instructions count */
if ( n_contours >= 0xFFF || p + ( n_contours + 1 ) * 2 > limit )
goto Invalid_Outline;
prev_cont = FT_NEXT_SHORT( p );
if ( n_contours > 0 )
cont[0] = prev_cont;
if ( prev_cont < 0 )
goto Invalid_Outline;
for ( cont++; cont < cont_limit; cont++ )
{
cont[0] = FT_NEXT_SHORT( p );
if ( cont[0] <= prev_cont )
{
/* unordered contours: this is invalid */
goto Invalid_Outline;
}
prev_cont = cont[0];
}
n_points = 0;
if ( n_contours > 0 )
{
n_points = cont[-1] + 1;
if ( n_points < 0 )
goto Invalid_Outline;
}
/* note that we will add four phantom points later */
error = FT_GLYPHLOADER_CHECK_POINTS( gloader, n_points + 4, 0 );
if ( error )
goto Fail;
/* reading the bytecode instructions */
load->glyph->control_len = 0;
load->glyph->control_data = 0;
if ( p + 2 > limit )
goto Invalid_Outline;
n_ins = FT_NEXT_USHORT( p );
FT_TRACE5(( " Instructions size: %u\n", n_ins ));
if ( n_ins > face->max_profile.maxSizeOfInstructions )
{
FT_TRACE0(( "TT_Load_Simple_Glyph: too many instructions (%d)\n",
n_ins ));
error = TT_Err_Too_Many_Hints;
goto Fail;
}
if ( ( limit - p ) < n_ins )
{
FT_TRACE0(( "TT_Load_Simple_Glyph: instruction count mismatch\n" ));
error = TT_Err_Too_Many_Hints;
goto Fail;
}
if ( IS_HINTED( load->load_flags ) )
{
load->glyph->control_len = n_ins;
load->glyph->control_data = load->exec->glyphIns;
FT_MEM_COPY( load->exec->glyphIns, p, (FT_Long)n_ins );
}
p += n_ins;
outline = &gloader->current.outline;
/* reading the point tags */
flag = (FT_Byte*)outline->tags;
flag_limit = flag + n_points;
FT_ASSERT( flag != NULL );
while ( flag < flag_limit )
{
if ( p + 1 > limit )
goto Invalid_Outline;
*flag++ = c = FT_NEXT_BYTE( p );
if ( c & 8 )
{
if ( p + 1 > limit )
goto Invalid_Outline;
count = FT_NEXT_BYTE( p );
if ( flag + (FT_Int)count > flag_limit )
goto Invalid_Outline;
for ( ; count > 0; count-- )
*flag++ = c;
}
}
/* reading the X coordinates */
vec = outline->points;
vec_limit = vec + n_points;
flag = (FT_Byte*)outline->tags;
x = 0;
if ( p + xy_size > limit )
goto Invalid_Outline;
for ( ; vec < vec_limit; vec++, flag++ )
{
FT_Pos y = 0;
FT_Byte f = *flag;
if ( f & 2 )
{
if ( p + 1 > limit )
goto Invalid_Outline;
y = (FT_Pos)FT_NEXT_BYTE( p );
if ( ( f & 16 ) == 0 )
y = -y;
}
else if ( ( f & 16 ) == 0 )
{
if ( p + 2 > limit )
goto Invalid_Outline;
y = (FT_Pos)FT_NEXT_SHORT( p );
}
x += y;
vec->x = x;
/* the cast is for stupid compilers */
*flag = (FT_Byte)( f & ~( 2 | 16 ) );
}
/* reading the Y coordinates */
vec = gloader->current.outline.points;
vec_limit = vec + n_points;
flag = (FT_Byte*)outline->tags;
x = 0;
for ( ; vec < vec_limit; vec++, flag++ )
{
FT_Pos y = 0;
FT_Byte f = *flag;
if ( f & 4 )
{
if ( p + 1 > limit )
goto Invalid_Outline;
y = (FT_Pos)FT_NEXT_BYTE( p );
if ( ( f & 32 ) == 0 )
y = -y;
}
else if ( ( f & 32 ) == 0 )
{
if ( p + 2 > limit )
goto Invalid_Outline;
y = (FT_Pos)FT_NEXT_SHORT( p );
}
x += y;
vec->y = x;
/* the cast is for stupid compilers */
*flag = (FT_Byte)( f & FT_CURVE_TAG_ON );
}
outline->n_points = (FT_UShort)n_points;
outline->n_contours = (FT_Short) n_contours;
load->cursor = p;
Fail:
return error;
Invalid_Outline:
error = TT_Err_Invalid_Outline;
goto Fail;
}
FT_CALLBACK_DEF( FT_Error )
TT_Load_Composite_Glyph( TT_Loader loader )
{
FT_Error error;
FT_Byte* p = loader->cursor;
FT_Byte* limit = loader->limit;
FT_GlyphLoader gloader = loader->gloader;
FT_SubGlyph subglyph;
FT_UInt num_subglyphs;
num_subglyphs = 0;
do
{
FT_Fixed xx, xy, yy, yx;
FT_UInt count;
/* check that we can load a new subglyph */
error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs + 1 );
if ( error )
goto Fail;
/* check space */
if ( p + 4 > limit )
goto Invalid_Composite;
subglyph = gloader->current.subglyphs + num_subglyphs;
subglyph->arg1 = subglyph->arg2 = 0;
subglyph->flags = FT_NEXT_USHORT( p );
subglyph->index = FT_NEXT_USHORT( p );
/* check space */
count = 2;
if ( subglyph->flags & ARGS_ARE_WORDS )
count += 2;
if ( subglyph->flags & WE_HAVE_A_SCALE )
count += 2;
else if ( subglyph->flags & WE_HAVE_AN_XY_SCALE )
count += 4;
else if ( subglyph->flags & WE_HAVE_A_2X2 )
count += 8;
if ( p + count > limit )
goto Invalid_Composite;
/* read arguments */
if ( subglyph->flags & ARGS_ARE_WORDS )
{
subglyph->arg1 = FT_NEXT_SHORT( p );
subglyph->arg2 = FT_NEXT_SHORT( p );
}
else
{
subglyph->arg1 = FT_NEXT_CHAR( p );
subglyph->arg2 = FT_NEXT_CHAR( p );
}
/* read transform */
xx = yy = 0x10000L;
xy = yx = 0;
if ( subglyph->flags & WE_HAVE_A_SCALE )
{
xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
yy = xx;
}
else if ( subglyph->flags & WE_HAVE_AN_XY_SCALE )
{
xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
yy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
}
else if ( subglyph->flags & WE_HAVE_A_2X2 )
{
xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
yx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
xy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
yy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
}
subglyph->transform.xx = xx;
subglyph->transform.xy = xy;
subglyph->transform.yx = yx;
subglyph->transform.yy = yy;
num_subglyphs++;
} while ( subglyph->flags & MORE_COMPONENTS );
gloader->current.num_subglyphs = num_subglyphs;
{
FT_Stream stream = loader->stream;
/* we must undo the FT_FRAME_ENTER in order to point */
/* to the composite instructions, if we find some. */
/* We will process them later. */
/* */
loader->ins_pos = (FT_ULong)( FT_STREAM_POS() +
p - limit );
}
loader->cursor = p;
Fail:
return error;
Invalid_Composite:
error = TT_Err_Invalid_Composite;
goto Fail;
}
FT_LOCAL_DEF( void )
TT_Init_Glyph_Loading( TT_Face face )
{
face->access_glyph_frame = TT_Access_Glyph_Frame;
face->read_glyph_header = TT_Load_Glyph_Header;
face->read_simple_glyph = TT_Load_Simple_Glyph;
face->read_composite_glyph = TT_Load_Composite_Glyph;
face->forget_glyph_frame = TT_Forget_Glyph_Frame;
}
static void
tt_prepare_zone( TT_GlyphZone zone,
FT_GlyphLoad load,
FT_UInt start_point,
FT_UInt start_contour )
{
zone->n_points = (FT_UShort)( load->outline.n_points - start_point );
zone->n_contours = (FT_Short) ( load->outline.n_contours -
start_contour );
zone->org = load->extra_points + start_point;
zone->cur = load->outline.points + start_point;
zone->orus = load->extra_points2 + start_point;
zone->tags = (FT_Byte*)load->outline.tags + start_point;
zone->contours = (FT_UShort*)load->outline.contours + start_contour;
zone->first_point = (FT_UShort)start_point;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Hint_Glyph */
/* */
/* <Description> */
/* Hint the glyph using the zone prepared by the caller. Note that */
/* the zone is supposed to include four phantom points. */
/* */
static FT_Error
TT_Hint_Glyph( TT_Loader loader,
FT_Bool is_composite )
{
TT_GlyphZone zone = &loader->zone;
FT_Pos origin;
FT_UInt n_ins;
if ( loader->glyph->control_len > 0xFFFFL )
{
FT_TRACE1(( "TT_Hint_Glyph: too long instructions " ));
FT_TRACE1(( "(0x%lx byte) is truncated\n",
loader->glyph->control_len ));
}
n_ins = (FT_UInt)( loader->glyph->control_len );
origin = zone->cur[zone->n_points - 4].x;
origin = FT_PIX_ROUND( origin ) - origin;
if ( origin )
translate_array( zone->n_points, zone->cur, origin, 0 );
/* save original point position in org */
if ( n_ins > 0 )
FT_ARRAY_COPY( zone->org, zone->cur, zone->n_points );
/* Reset graphics state. */
loader->exec->GS = ((TT_Size)loader->size)->GS;
/* XXX: UNDOCUMENTED! Hinting instructions of a composite glyph */
/* completely refer to the (already) hinted subglyphs. */
if ( is_composite )
{
loader->exec->metrics.x_scale = 1 << 16;
loader->exec->metrics.y_scale = 1 << 16;
FT_ARRAY_COPY( zone->orus, zone->cur, zone->n_points );
}
else
{
loader->exec->metrics.x_scale =
((TT_Size)loader->size)->metrics.x_scale;
loader->exec->metrics.y_scale =
((TT_Size)loader->size)->metrics.y_scale;
}
/* round pp2 and pp4 */
zone->cur[zone->n_points - 3].x =
FT_PIX_ROUND( zone->cur[zone->n_points - 3].x );
zone->cur[zone->n_points - 1].y =
FT_PIX_ROUND( zone->cur[zone->n_points - 1].y );
if ( n_ins > 0 )
{
FT_Bool debug;
FT_Error error;
FT_GlyphLoader gloader = loader->gloader;
FT_Outline current_outline = gloader->current.outline;
error = TT_Set_CodeRange( loader->exec, tt_coderange_glyph,
loader->exec->glyphIns, n_ins );
if ( error )
return error;
loader->exec->is_composite = is_composite;
loader->exec->pts = *zone;
debug = FT_BOOL( !( loader->load_flags & FT_LOAD_NO_SCALE ) &&
((TT_Size)loader->size)->debug );
error = TT_Run_Context( loader->exec, debug );
if ( error && loader->exec->pedantic_hinting )
return error;
/* store drop-out mode in bits 5-7; set bit 2 also as a marker */
current_outline.tags[0] |=
( loader->exec->GS.scan_type << 5 ) | FT_CURVE_TAG_HAS_SCANMODE;
}
/* save glyph phantom points */
if ( !loader->preserve_pps )
{
loader->pp1 = zone->cur[zone->n_points - 4];
loader->pp2 = zone->cur[zone->n_points - 3];
loader->pp3 = zone->cur[zone->n_points - 2];
loader->pp4 = zone->cur[zone->n_points - 1];
}
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Process_Simple_Glyph */
/* */
/* <Description> */
/* Once a simple glyph has been loaded, it needs to be processed. */
/* Usually, this means scaling and hinting through bytecode */
/* interpretation. */
/* */
static FT_Error
TT_Process_Simple_Glyph( TT_Loader loader )
{
FT_GlyphLoader gloader = loader->gloader;
FT_Error error = TT_Err_Ok;
FT_Outline* outline;
FT_Int n_points;
outline = &gloader->current.outline;
n_points = outline->n_points;
/* set phantom points */
outline->points[n_points ] = loader->pp1;
outline->points[n_points + 1] = loader->pp2;
outline->points[n_points + 2] = loader->pp3;
outline->points[n_points + 3] = loader->pp4;
outline->tags[n_points ] = 0;
outline->tags[n_points + 1] = 0;
outline->tags[n_points + 2] = 0;
outline->tags[n_points + 3] = 0;
n_points += 4;
if ( ((TT_Face)loader->face)->doblend )
{
/* Deltas apply to the unscaled data. */
FT_Vector* deltas;
FT_Memory memory = loader->face->memory;
FT_Int i;
error = TT_Vary_Get_Glyph_Deltas( (TT_Face)(loader->face),
loader->glyph_index,
&deltas,
n_points );
if ( error )
return error;
for ( i = 0; i < n_points; ++i )
{
outline->points[i].x += deltas[i].x;
outline->points[i].y += deltas[i].y;
}
FT_FREE( deltas );
}
if ( IS_HINTED( loader->load_flags ) )
{
tt_prepare_zone( &loader->zone, &gloader->current, 0, 0 );
FT_ARRAY_COPY( loader->zone.orus, loader->zone.cur,
loader->zone.n_points + 4 );
}
/* scale the glyph */
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
FT_Vector* vec = outline->points;
FT_Vector* limit = outline->points + n_points;
FT_Fixed x_scale = ((TT_Size)loader->size)->metrics.x_scale;
FT_Fixed y_scale = ((TT_Size)loader->size)->metrics.y_scale;
for ( ; vec < limit; vec++ )
{
vec->x = FT_MulFix( vec->x, x_scale );
vec->y = FT_MulFix( vec->y, y_scale );
}
loader->pp1 = outline->points[n_points - 4];
loader->pp2 = outline->points[n_points - 3];
loader->pp3 = outline->points[n_points - 2];
loader->pp4 = outline->points[n_points - 1];
}
if ( IS_HINTED( loader->load_flags ) )
{
loader->zone.n_points += 4;
error = TT_Hint_Glyph( loader, 0 );
}
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Process_Composite_Component */
/* */
/* <Description> */
/* Once a composite component has been loaded, it needs to be */
/* processed. Usually, this means transforming and translating. */
/* */
static FT_Error
TT_Process_Composite_Component( TT_Loader loader,
FT_SubGlyph subglyph,
FT_UInt start_point,
FT_UInt num_base_points )
{
FT_GlyphLoader gloader = loader->gloader;
FT_Vector* base_vec = gloader->base.outline.points;
FT_UInt num_points = gloader->base.outline.n_points;
FT_Bool have_scale;
FT_Pos x, y;
have_scale = FT_BOOL( subglyph->flags & ( WE_HAVE_A_SCALE |
WE_HAVE_AN_XY_SCALE |
WE_HAVE_A_2X2 ) );
/* perform the transform required for this subglyph */
if ( have_scale )
{
FT_UInt i;
for ( i = num_base_points; i < num_points; i++ )
FT_Vector_Transform( base_vec + i, &subglyph->transform );
}
/* get offset */
if ( !( subglyph->flags & ARGS_ARE_XY_VALUES ) )
{
FT_UInt k = subglyph->arg1;
FT_UInt l = subglyph->arg2;
FT_Vector* p1;
FT_Vector* p2;
/* match l-th point of the newly loaded component to the k-th point */
/* of the previously loaded components. */
/* change to the point numbers used by our outline */
k += start_point;
l += num_base_points;
if ( k >= num_base_points ||
l >= num_points )
return TT_Err_Invalid_Composite;
p1 = gloader->base.outline.points + k;
p2 = gloader->base.outline.points + l;
x = p1->x - p2->x;
y = p1->y - p2->y;
}
else
{
x = subglyph->arg1;
y = subglyph->arg2;
if ( !x && !y )
return TT_Err_Ok;
/* Use a default value dependent on */
/* TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED. This is useful for old TT */
/* fonts which don't set the xxx_COMPONENT_OFFSET bit. */
if ( have_scale &&
( subglyph->flags & SCALED_COMPONENT_OFFSET ) )
{
#if 0
/*************************************************************************/
/* */
/* This algorithm is what Apple documents. But it doesn't work. */
/* */
int a = subglyph->transform.xx > 0 ? subglyph->transform.xx
: -subglyph->transform.xx;
int b = subglyph->transform.yx > 0 ? subglyph->transform.yx
: -subglyph->transform.yx;
int c = subglyph->transform.xy > 0 ? subglyph->transform.xy
: -subglyph->transform.xy;
int d = subglyph->transform.yy > 0 ? subglyph->transform.yy
: -subglyph->transform.yy;
int m = a > b ? a : b;
int n = c > d ? c : d;
if ( a - b <= 33 && a - b >= -33 )
m *= 2;
if ( c - d <= 33 && c - d >= -33 )
n *= 2;
x = FT_MulFix( x, m );
y = FT_MulFix( y, n );
/* 0 */
#else
/*************************************************************************/
/* */
/* This algorithm is a guess and works much better than the above. */
/* */
FT_Fixed mac_xscale = FT_SqrtFixed(
(FT_Int32)FT_MulFix( subglyph->transform.xx,
subglyph->transform.xx ) +
(FT_Int32)FT_MulFix( subglyph->transform.xy,
subglyph->transform.xy ) );
FT_Fixed mac_yscale = FT_SqrtFixed(
(FT_Int32)FT_MulFix( subglyph->transform.yy,
subglyph->transform.yy ) +
(FT_Int32)FT_MulFix( subglyph->transform.yx,
subglyph->transform.yx ) );
x = FT_MulFix( x, mac_xscale );
y = FT_MulFix( y, mac_yscale );
/* 0 */
#endif
}
if ( !( loader->load_flags & FT_LOAD_NO_SCALE ) )
{
FT_Fixed x_scale = ((TT_Size)loader->size)->metrics.x_scale;
FT_Fixed y_scale = ((TT_Size)loader->size)->metrics.y_scale;
x = FT_MulFix( x, x_scale );
y = FT_MulFix( y, y_scale );
if ( subglyph->flags & ROUND_XY_TO_GRID )
{
x = FT_PIX_ROUND( x );
y = FT_PIX_ROUND( y );
}
}
}
if ( x || y )
translate_array( num_points - num_base_points,
base_vec + num_base_points,
x, y );
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Process_Composite_Glyph */
/* */
/* <Description> */
/* This is slightly different from TT_Process_Simple_Glyph, in that */
/* its sole purpose is to hint the glyph. Thus this function is */
/* only available when bytecode interpreter is enabled. */
/* */
static FT_Error
TT_Process_Composite_Glyph( TT_Loader loader,
FT_UInt start_point,
FT_UInt start_contour )
{
FT_Error error;
FT_Outline* outline;
FT_UInt i;
outline = &loader->gloader->base.outline;
/* make room for phantom points */
error = FT_GLYPHLOADER_CHECK_POINTS( loader->gloader,
outline->n_points + 4,
0 );
if ( error )
return error;
outline->points[outline->n_points ] = loader->pp1;
outline->points[outline->n_points + 1] = loader->pp2;
outline->points[outline->n_points + 2] = loader->pp3;
outline->points[outline->n_points + 3] = loader->pp4;
outline->tags[outline->n_points ] = 0;
outline->tags[outline->n_points + 1] = 0;
outline->tags[outline->n_points + 2] = 0;
outline->tags[outline->n_points + 3] = 0;
{
FT_Stream stream = loader->stream;
FT_UShort n_ins, max_ins;
FT_ULong tmp;
/* TT_Load_Composite_Glyph only gives us the offset of instructions */
/* so we read them here */
if ( FT_STREAM_SEEK( loader->ins_pos ) ||
FT_READ_USHORT( n_ins ) )
return error;
FT_TRACE5(( " Instructions size = %d\n", n_ins ));
/* check it */
max_ins = ((TT_Face)loader->face)->max_profile.maxSizeOfInstructions;
if ( n_ins > max_ins )
{
/* acroread ignores this field, so we only do a rough safety check */
if ( (FT_Int)n_ins > loader->byte_len )
{
FT_TRACE1(( "TT_Process_Composite_Glyph: "
"too many instructions (%d) for glyph with length %d\n",
n_ins, loader->byte_len ));
return TT_Err_Too_Many_Hints;
}
tmp = loader->exec->glyphSize;
error = Update_Max( loader->exec->memory,
&tmp,
sizeof ( FT_Byte ),
(void*)&loader->exec->glyphIns,
n_ins );
loader->exec->glyphSize = (FT_UShort)tmp;
if ( error )
return error;
}
else if ( n_ins == 0 )
return TT_Err_Ok;
if ( FT_STREAM_READ( loader->exec->glyphIns, n_ins ) )
return error;
loader->glyph->control_data = loader->exec->glyphIns;
loader->glyph->control_len = n_ins;
}
tt_prepare_zone( &loader->zone, &loader->gloader->base,
start_point, start_contour );
/* Some points are likely touched during execution of */
/* instructions on components. So let's untouch them. */
for ( i = start_point; i < loader->zone.n_points; i++ )
loader->zone.tags[i] &= ~FT_CURVE_TAG_TOUCH_BOTH;
loader->zone.n_points += 4;
return TT_Hint_Glyph( loader, 1 );
}
/* Calculate the four phantom points. */
/* The first two stand for horizontal origin and advance. */
/* The last two stand for vertical origin and advance. */
#define TT_LOADER_SET_PP( loader ) \
do { \
(loader)->pp1.x = (loader)->bbox.xMin - (loader)->left_bearing; \
(loader)->pp1.y = 0; \
(loader)->pp2.x = (loader)->pp1.x + (loader)->advance; \
(loader)->pp2.y = 0; \
(loader)->pp3.x = 0; \
(loader)->pp3.y = (loader)->top_bearing + (loader)->bbox.yMax; \
(loader)->pp4.x = 0; \
(loader)->pp4.y = (loader)->pp3.y - (loader)->vadvance; \
} while ( 0 )
/*************************************************************************/
/* */
/* <Function> */
/* load_truetype_glyph */
/* */
/* <Description> */
/* Loads a given truetype glyph. Handles composites and uses a */
/* TT_Loader object. */
/* */
static FT_Error
load_truetype_glyph( TT_Loader loader,
FT_UInt glyph_index,
FT_UInt recurse_count,
FT_Bool header_only )
{
FT_Error error = TT_Err_Ok;
FT_Fixed x_scale, y_scale;
FT_ULong offset;
TT_Face face = (TT_Face)loader->face;
FT_GlyphLoader gloader = loader->gloader;
FT_Bool opened_frame = 0;
FT_Vector* deltas = NULL;
FT_StreamRec inc_stream;
FT_Data glyph_data;
FT_Bool glyph_data_loaded = 0;
/* some fonts have an incorrect value of `maxComponentDepth', */
/* thus we allow depth 1 to catch the majority of them */
if ( recurse_count > 1 &&
recurse_count > face->max_profile.maxComponentDepth )
{
error = TT_Err_Invalid_Composite;
goto Exit;
}
/* check glyph index */
if ( glyph_index >= (FT_UInt)face->root.num_glyphs )
{
error = TT_Err_Invalid_Glyph_Index;
goto Exit;
}
loader->glyph_index = glyph_index;
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
x_scale = ((TT_Size)loader->size)->metrics.x_scale;
y_scale = ((TT_Size)loader->size)->metrics.y_scale;
}
else
{
x_scale = 0x10000L;
y_scale = 0x10000L;
}
tt_get_metrics( loader, glyph_index );
/* Set `offset' to the start of the glyph relative to the start of */
/* the `glyf' table, and `byte_len' to the length of the glyph in */
/* bytes. */
/* If we are loading glyph data via the incremental interface, set */
/* the loader stream to a memory stream reading the data returned */
/* by the interface. */
if ( face->root.internal->incremental_interface )
{
error = face->root.internal->incremental_interface->funcs->get_glyph_data(
face->root.internal->incremental_interface->object,
glyph_index, &glyph_data );
if ( error )
goto Exit;
glyph_data_loaded = 1;
offset = 0;
loader->byte_len = glyph_data.length;
FT_MEM_ZERO( &inc_stream, sizeof ( inc_stream ) );
FT_Stream_OpenMemory( &inc_stream,
glyph_data.pointer, glyph_data.length );
loader->stream = &inc_stream;
}
else
offset = tt_face_get_location( face, glyph_index,
(FT_UInt*)&loader->byte_len );
if ( loader->byte_len > 0 )
{
/* for the incremental interface, `glyf_offset' is always zero */
if ( !loader->glyf_offset &&
!face->root.internal->incremental_interface )
{
FT_TRACE2(( "no `glyf' table but non-zero `loca' entry\n" ));
error = TT_Err_Invalid_Table;
goto Exit;
}
error = face->access_glyph_frame( loader, glyph_index,
loader->glyf_offset + offset,
loader->byte_len );
if ( error )
goto Exit;
opened_frame = 1;
/* read glyph header first */
error = face->read_glyph_header( loader );
if ( error || header_only )
goto Exit;
}
if ( loader->byte_len == 0 || loader->n_contours == 0 )
{
loader->bbox.xMin = 0;
loader->bbox.xMax = 0;
loader->bbox.yMin = 0;
loader->bbox.yMax = 0;
if ( header_only )
goto Exit;
/* must initialize points before (possibly) overriding */
/* glyph metrics from the incremental interface */
TT_LOADER_SET_PP( loader );
tt_get_metrics_incr_overrides( loader, glyph_index );
if ( ((TT_Face)(loader->face))->doblend )
{
/* this must be done before scaling */
FT_Memory memory = loader->face->memory;
error = TT_Vary_Get_Glyph_Deltas( (TT_Face)(loader->face),
glyph_index, &deltas, 4 );
if ( error )
goto Exit;
loader->pp1.x += deltas[0].x; loader->pp1.y += deltas[0].y;
loader->pp2.x += deltas[1].x; loader->pp2.y += deltas[1].y;
loader->pp3.x += deltas[2].x; loader->pp3.y += deltas[2].y;
loader->pp4.x += deltas[3].x; loader->pp4.y += deltas[3].y;
FT_FREE( deltas );
}
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
loader->pp1.x = FT_MulFix( loader->pp1.x, x_scale );
loader->pp2.x = FT_MulFix( loader->pp2.x, x_scale );
loader->pp3.y = FT_MulFix( loader->pp3.y, y_scale );
loader->pp4.y = FT_MulFix( loader->pp4.y, y_scale );
}
error = TT_Err_Ok;
goto Exit;
}
/* must initialize points before (possibly) overriding */
/* glyph metrics from the incremental interface */
TT_LOADER_SET_PP( loader );
tt_get_metrics_incr_overrides( loader, glyph_index );
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/* if it is a simple glyph, load it */
if ( loader->n_contours > 0 )
{
error = face->read_simple_glyph( loader );
if ( error )
goto Exit;
/* all data have been read */
face->forget_glyph_frame( loader );
opened_frame = 0;
error = TT_Process_Simple_Glyph( loader );
if ( error )
goto Exit;
FT_GlyphLoader_Add( gloader );
}
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/* otherwise, load a composite! */
else if ( loader->n_contours == -1 )
{
FT_UInt start_point;
FT_UInt start_contour;
/* position of composite instructions, if any */
FT_ULong ins_pos;
start_point = gloader->base.outline.n_points;
start_contour = gloader->base.outline.n_contours;
/* for each subglyph, read composite header */
error = face->read_composite_glyph( loader );
if ( error )
goto Exit;
/* store the offset of instructions */
ins_pos = loader->ins_pos;
/* all data we need are read */
face->forget_glyph_frame( loader );
opened_frame = 0;
if ( face->doblend )
{
FT_Int i, limit;
FT_SubGlyph subglyph;
FT_Memory memory = face->root.memory;
/* this provides additional offsets */
/* for each component's translation */
if ( ( error = TT_Vary_Get_Glyph_Deltas(
face,
glyph_index,
&deltas,
gloader->current.num_subglyphs + 4 )) != 0 )
goto Exit;
subglyph = gloader->current.subglyphs + gloader->base.num_subglyphs;
limit = gloader->current.num_subglyphs;
for ( i = 0; i < limit; ++i, ++subglyph )
{
if ( subglyph->flags & ARGS_ARE_XY_VALUES )
{
/* XXX: overflow check for subglyph->{arg1,arg2}. */
/* deltas[i].{x,y} must be within signed 16-bit, */
/* but the restriction of summed delta is not clear */
subglyph->arg1 += (FT_Int16)deltas[i].x;
subglyph->arg2 += (FT_Int16)deltas[i].y;
}
}
loader->pp1.x += deltas[i + 0].x; loader->pp1.y += deltas[i + 0].y;
loader->pp2.x += deltas[i + 1].x; loader->pp2.y += deltas[i + 1].y;
loader->pp3.x += deltas[i + 2].x; loader->pp3.y += deltas[i + 2].y;
loader->pp4.x += deltas[i + 3].x; loader->pp4.y += deltas[i + 3].y;
FT_FREE( deltas );
}
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
loader->pp1.x = FT_MulFix( loader->pp1.x, x_scale );
loader->pp2.x = FT_MulFix( loader->pp2.x, x_scale );
loader->pp3.y = FT_MulFix( loader->pp3.y, y_scale );
loader->pp4.y = FT_MulFix( loader->pp4.y, y_scale );
}
/* if the flag FT_LOAD_NO_RECURSE is set, we return the subglyph */
/* `as is' in the glyph slot (the client application will be */
/* responsible for interpreting these data)... */
if ( loader->load_flags & FT_LOAD_NO_RECURSE )
{
FT_GlyphLoader_Add( gloader );
loader->glyph->format = FT_GLYPH_FORMAT_COMPOSITE;
goto Exit;
}
/*********************************************************************/
/*********************************************************************/
/*********************************************************************/
{
FT_UInt n, num_base_points;
FT_SubGlyph subglyph = 0;
FT_UInt num_points = start_point;
FT_UInt num_subglyphs = gloader->current.num_subglyphs;
FT_UInt num_base_subgs = gloader->base.num_subglyphs;
FT_Stream old_stream = loader->stream;
FT_Int old_byte_len = loader->byte_len;
FT_GlyphLoader_Add( gloader );
/* read each subglyph independently */
for ( n = 0; n < num_subglyphs; n++ )
{
FT_Vector pp[4];
/* Each time we call load_truetype_glyph in this loop, the */
/* value of `gloader.base.subglyphs' can change due to table */
/* reallocations. We thus need to recompute the subglyph */
/* pointer on each iteration. */
subglyph = gloader->base.subglyphs + num_base_subgs + n;
pp[0] = loader->pp1;
pp[1] = loader->pp2;
pp[2] = loader->pp3;
pp[3] = loader->pp4;
num_base_points = gloader->base.outline.n_points;
error = load_truetype_glyph( loader, subglyph->index,
recurse_count + 1, FALSE );
if ( error )
goto Exit;
/* restore subglyph pointer */
subglyph = gloader->base.subglyphs + num_base_subgs + n;
if ( !( subglyph->flags & USE_MY_METRICS ) )
{
loader->pp1 = pp[0];
loader->pp2 = pp[1];
loader->pp3 = pp[2];
loader->pp4 = pp[3];
}
num_points = gloader->base.outline.n_points;
if ( num_points == num_base_points )
continue;
/* gloader->base.outline consists of three parts: */
/* 0 -(1)-> start_point -(2)-> num_base_points -(3)-> n_points. */
/* */
/* (1): exists from the beginning */
/* (2): components that have been loaded so far */
/* (3): the newly loaded component */
TT_Process_Composite_Component( loader, subglyph, start_point,
num_base_points );
}
loader->stream = old_stream;
loader->byte_len = old_byte_len;
/* process the glyph */
loader->ins_pos = ins_pos;
if ( IS_HINTED( loader->load_flags ) &&
subglyph->flags & WE_HAVE_INSTR &&
num_points > start_point )
TT_Process_Composite_Glyph( loader, start_point, start_contour );
}
}
else
{
/* invalid composite count (negative but not -1) */
error = TT_Err_Invalid_Outline;
goto Exit;
}
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
Exit:
if ( opened_frame )
face->forget_glyph_frame( loader );
if ( glyph_data_loaded )
face->root.internal->incremental_interface->funcs->free_glyph_data(
face->root.internal->incremental_interface->object,
&glyph_data );
return error;
}
static FT_Error
compute_glyph_metrics( TT_Loader loader,
FT_UInt glyph_index )
{
FT_BBox bbox;
TT_Face face = (TT_Face)loader->face;
FT_Fixed y_scale;
TT_GlyphSlot glyph = loader->glyph;
TT_Size size = (TT_Size)loader->size;
y_scale = 0x10000L;
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
y_scale = size->root.metrics.y_scale;
if ( glyph->format != FT_GLYPH_FORMAT_COMPOSITE )
FT_Outline_Get_CBox( &glyph->outline, &bbox );
else
bbox = loader->bbox;
/* get the device-independent horizontal advance; it is scaled later */
/* by the base layer. */
glyph->linearHoriAdvance = loader->linear;
glyph->metrics.horiBearingX = bbox.xMin;
glyph->metrics.horiBearingY = bbox.yMax;
glyph->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
/* adjust advance width to the value contained in the hdmx table */
if ( !face->postscript.isFixedPitch &&
IS_HINTED( loader->load_flags ) )
{
FT_Byte* widthp;
widthp = tt_face_get_device_metrics( face,
size->root.metrics.x_ppem,
glyph_index );
if ( widthp )
glyph->metrics.horiAdvance = *widthp << 6;
}
/* set glyph dimensions */
glyph->metrics.width = bbox.xMax - bbox.xMin;
glyph->metrics.height = bbox.yMax - bbox.yMin;
/* Now take care of vertical metrics. In the case where there is */
/* no vertical information within the font (relatively common), */
/* create some metrics manually */
{
/* scaled vertical top side bearing */
FT_Pos top;
/* scaled vertical advance height */
FT_Pos advance;
/* Get the unscaled top bearing and advance height. */
if ( face->vertical_info &&
face->vertical.number_Of_VMetrics > 0 )
{
top = (FT_Short)FT_DivFix( loader->pp3.y - bbox.yMax,
y_scale );
if ( loader->pp3.y <= loader->pp4.y )
advance = 0;
else
advance = (FT_UShort)FT_DivFix( loader->pp3.y - loader->pp4.y,
y_scale );
}
else
{
FT_Pos height;
/* XXX Compute top side bearing and advance height in */
/* Get_VMetrics instead of here. */
/* NOTE: The OS/2 values are the only `portable' ones, */
/* which is why we use them, if there is an OS/2 */
/* table in the font. Otherwise, we use the */
/* values defined in the horizontal header. */
height = (FT_Short)FT_DivFix( bbox.yMax - bbox.yMin,
y_scale );
if ( face->os2.version != 0xFFFFU )
advance = (FT_Pos)( face->os2.sTypoAscender -
face->os2.sTypoDescender );
else
advance = (FT_Pos)( face->horizontal.Ascender -
face->horizontal.Descender );
top = ( advance - height ) / 2;
}
{
FT_Incremental_InterfaceRec* incr;
FT_Incremental_MetricsRec metrics;
FT_Error error;
incr = face->root.internal->incremental_interface;
/* If this is an incrementally loaded font see if there are */
/* overriding metrics for this glyph. */
if ( incr && incr->funcs->get_glyph_metrics )
{
metrics.bearing_x = 0;
metrics.bearing_y = top;
metrics.advance = advance;
error = incr->funcs->get_glyph_metrics( incr->object,
glyph_index,
TRUE,
&metrics );
if ( error )
return error;
top = metrics.bearing_y;
advance = metrics.advance;
}
}
/* GWW: Do vertical metrics get loaded incrementally too? */
glyph->linearVertAdvance = advance;
/* scale the metrics */
if ( !( loader->load_flags & FT_LOAD_NO_SCALE ) )
{
top = FT_MulFix( top, y_scale );
advance = FT_MulFix( advance, y_scale );
}
/* XXX: for now, we have no better algorithm for the lsb, but it */
/* should work fine. */
/* */
glyph->metrics.vertBearingX = glyph->metrics.horiBearingX -
glyph->metrics.horiAdvance / 2;
glyph->metrics.vertBearingY = top;
glyph->metrics.vertAdvance = advance;
}
return 0;
}
static FT_Error
load_sbit_image( TT_Size size,
TT_GlyphSlot glyph,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
TT_Face face;
SFNT_Service sfnt;
FT_Stream stream;
FT_Error error;
TT_SBit_MetricsRec metrics;
face = (TT_Face)glyph->face;
sfnt = (SFNT_Service)face->sfnt;
stream = face->root.stream;
error = sfnt->load_sbit_image( face,
size->strike_index,
glyph_index,
(FT_Int)load_flags,
stream,
&glyph->bitmap,
&metrics );
if ( !error )
{
glyph->outline.n_points = 0;
glyph->outline.n_contours = 0;
glyph->metrics.width = (FT_Pos)metrics.width << 6;
glyph->metrics.height = (FT_Pos)metrics.height << 6;
glyph->metrics.horiBearingX = (FT_Pos)metrics.horiBearingX << 6;
glyph->metrics.horiBearingY = (FT_Pos)metrics.horiBearingY << 6;
glyph->metrics.horiAdvance = (FT_Pos)metrics.horiAdvance << 6;
glyph->metrics.vertBearingX = (FT_Pos)metrics.vertBearingX << 6;
glyph->metrics.vertBearingY = (FT_Pos)metrics.vertBearingY << 6;
glyph->metrics.vertAdvance = (FT_Pos)metrics.vertAdvance << 6;
glyph->format = FT_GLYPH_FORMAT_BITMAP;
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
glyph->bitmap_left = metrics.vertBearingX;
glyph->bitmap_top = metrics.vertBearingY;
}
else
{
glyph->bitmap_left = metrics.horiBearingX;
glyph->bitmap_top = metrics.horiBearingY;
}
}
return error;
}
static FT_Error
tt_loader_init( TT_Loader loader,
TT_Size size,
TT_GlyphSlot glyph,
FT_Int32 load_flags,
FT_Bool glyf_table_only )
{
TT_Face face;
FT_Stream stream;
FT_Bool pedantic = FT_BOOL( load_flags & FT_LOAD_PEDANTIC );
face = (TT_Face)glyph->face;
stream = face->root.stream;
FT_MEM_ZERO( loader, sizeof ( TT_LoaderRec ) );
/* load execution context */
if ( IS_HINTED( load_flags ) && !glyf_table_only )
{
TT_ExecContext exec;
FT_Bool grayscale;
if ( !size->cvt_ready )
{
FT_Error error = tt_size_ready_bytecode( size, pedantic );
if ( error )
return error;
}
/* query new execution context */
exec = size->debug ? size->context
: ( (TT_Driver)FT_FACE_DRIVER( face ) )->context;
if ( !exec )
return TT_Err_Could_Not_Find_Context;
grayscale =
FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) != FT_RENDER_MODE_MONO );
TT_Load_Context( exec, face, size );
/* a change from mono to grayscale rendering (and vice versa) */
/* requires a re-execution of the CVT program */
if ( grayscale != exec->grayscale )
{
FT_UInt i;
FT_TRACE4(( "tt_loader_init: grayscale change,"
" re-executing `prep' table\n" ));
exec->grayscale = grayscale;
for ( i = 0; i < size->cvt_size; i++ )
size->cvt[i] = FT_MulFix( face->cvt[i], size->ttmetrics.scale );
tt_size_run_prep( size, pedantic );
}
/* see whether the cvt program has disabled hinting */
if ( exec->GS.instruct_control & 1 )
load_flags |= FT_LOAD_NO_HINTING;
/* load default graphics state -- if needed */
if ( exec->GS.instruct_control & 2 )
exec->GS = tt_default_graphics_state;
exec->pedantic_hinting = FT_BOOL( load_flags & FT_LOAD_PEDANTIC );
loader->exec = exec;
loader->instructions = exec->glyphIns;
}
/* seek to the beginning of the glyph table -- for Type 42 fonts */
/* the table might be accessed from a Postscript stream or something */
/* else... */
if ( face->root.internal->incremental_interface )
loader->glyf_offset = 0;
else
{
FT_Error error = face->goto_table( face, TTAG_glyf, stream, 0 );
if ( error == TT_Err_Table_Missing )
loader->glyf_offset = 0;
else if ( error )
{
FT_ERROR(( "tt_loader_init: could not access glyph table\n" ));
return error;
}
else
loader->glyf_offset = FT_STREAM_POS();
}
/* get face's glyph loader */
if ( !glyf_table_only )
{
FT_GlyphLoader gloader = glyph->internal->loader;
FT_GlyphLoader_Rewind( gloader );
loader->gloader = gloader;
}
loader->load_flags = load_flags;
loader->face = (FT_Face)face;
loader->size = (FT_Size)size;
loader->glyph = (FT_GlyphSlot)glyph;
loader->stream = stream;
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Load_Glyph */
/* */
/* <Description> */
/* A function used to load a single glyph within a given glyph slot, */
/* for a given size. */
/* */
/* <Input> */
/* glyph :: A handle to a target slot object where the glyph */
/* will be loaded. */
/* */
/* size :: A handle to the source face size at which the glyph */
/* must be scaled/loaded. */
/* */
/* glyph_index :: The index of the glyph in the font file. */
/* */
/* load_flags :: A flag indicating what to load for this glyph. The */
/* FT_LOAD_XXX constants can be used to control the */
/* glyph loading process (e.g., whether the outline */
/* should be scaled, whether to load bitmaps or not, */
/* whether to hint the outline, etc). */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Load_Glyph( TT_Size size,
TT_GlyphSlot glyph,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
TT_LoaderRec loader;
error = TT_Err_Ok;
/* try to load embedded bitmap if any */
/* */
/* XXX: The convention should be emphasized in */
/* the documents because it can be confusing. */
if ( size->strike_index != 0xFFFFFFFFUL &&
( load_flags & FT_LOAD_NO_BITMAP ) == 0 )
{
error = load_sbit_image( size, glyph, glyph_index, load_flags );
if ( !error )
{
if ( FT_IS_SCALABLE( glyph->face ) )
{
/* for the bbox we need the header only */
(void)tt_loader_init( &loader, size, glyph, load_flags, TRUE );
(void)load_truetype_glyph( &loader, glyph_index, 0, TRUE );
glyph->linearHoriAdvance = loader.linear;
glyph->linearVertAdvance = loader.top_bearing + loader.bbox.yMax -
loader.vadvance;
}
return TT_Err_Ok;
}
}
/* if FT_LOAD_NO_SCALE is not set, `ttmetrics' must be valid */
if ( !( load_flags & FT_LOAD_NO_SCALE ) && !size->ttmetrics.valid )
return TT_Err_Invalid_Size_Handle;
if ( load_flags & FT_LOAD_SBITS_ONLY )
return TT_Err_Invalid_Argument;
error = tt_loader_init( &loader, size, glyph, load_flags, FALSE );
if ( error )
return error;
glyph->format = FT_GLYPH_FORMAT_OUTLINE;
glyph->num_subglyphs = 0;
glyph->outline.flags = 0;
/* main loading loop */
error = load_truetype_glyph( &loader, glyph_index, 0, FALSE );
if ( !error )
{
if ( glyph->format == FT_GLYPH_FORMAT_COMPOSITE )
{
glyph->num_subglyphs = loader.gloader->base.num_subglyphs;
glyph->subglyphs = loader.gloader->base.subglyphs;
}
else
{
glyph->outline = loader.gloader->base.outline;
glyph->outline.flags &= ~FT_OUTLINE_SINGLE_PASS;
/* Translate array so that (0,0) is the glyph's origin. Note */
/* that this behaviour is independent on the value of bit 1 of */
/* the `flags' field in the `head' table -- at least major */
/* applications like Acroread indicate that. */
if ( loader.pp1.x )
FT_Outline_Translate( &glyph->outline, -loader.pp1.x, 0 );
}
if ( IS_HINTED( load_flags ) )
{
if ( loader.exec->GS.scan_control )
{
/* convert scan conversion mode to FT_OUTLINE_XXX flags */
switch ( loader.exec->GS.scan_type )
{
/* simple drop-outs including stubs */
case 0:
glyph->outline.flags |= FT_OUTLINE_INCLUDE_STUBS;
break;
/* simple drop-outs excluding stubs */
case 1:
/* nothing; it's the default rendering mode */
break;
/* smart drop-outs including stubs */
case 4:
glyph->outline.flags |= FT_OUTLINE_SMART_DROPOUTS |
FT_OUTLINE_INCLUDE_STUBS;
break;
/* smart drop-outs excluding stubs */
case 5:
glyph->outline.flags |= FT_OUTLINE_SMART_DROPOUTS;
break;
/* no drop-out control */
default:
glyph->outline.flags |= FT_OUTLINE_IGNORE_DROPOUTS;
break;
}
}
else
glyph->outline.flags |= FT_OUTLINE_IGNORE_DROPOUTS;
}
compute_glyph_metrics( &loader, glyph_index );
}
/* Set the `high precision' bit flag. */
/* This is _critical_ to get correct output for monochrome */
/* TrueType glyphs at all sizes using the bytecode interpreter. */
/* */
if ( !( load_flags & FT_LOAD_NO_SCALE ) &&
size->root.metrics.y_ppem < 24 )
glyph->outline.flags |= FT_OUTLINE_HIGH_PRECISION;
return error;
}
/* END */
/* object manager */
/***************************************************************************/
/* */
/* ttobjs.c */
/* */
/* Objects manager (body). */
/* */
/* Copyright 1996-2012 */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttobjs
/*************************************************************************/
/* */
/* GLYPH ZONE FUNCTIONS */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* tt_glyphzone_done */
/* */
/* <Description> */
/* Deallocate a glyph zone. */
/* */
/* <Input> */
/* zone :: A pointer to the target glyph zone. */
/* */
FT_LOCAL_DEF( void )
tt_glyphzone_done( TT_GlyphZone zone )
{
FT_Memory memory = zone->memory;
if ( memory )
{
FT_FREE( zone->contours );
FT_FREE( zone->tags );
FT_FREE( zone->cur );
FT_FREE( zone->org );
FT_FREE( zone->orus );
zone->max_points = zone->n_points = 0;
zone->max_contours = zone->n_contours = 0;
zone->memory = NULL;
}
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_glyphzone_new */
/* */
/* <Description> */
/* Allocate a new glyph zone. */
/* */
/* <Input> */
/* memory :: A handle to the current memory object. */
/* */
/* maxPoints :: The capacity of glyph zone in points. */
/* */
/* maxContours :: The capacity of glyph zone in contours. */
/* */
/* <Output> */
/* zone :: A pointer to the target glyph zone record. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_glyphzone_new( FT_Memory memory,
FT_UShort maxPoints,
FT_Short maxContours,
TT_GlyphZone zone )
{
FT_Error error;
FT_MEM_ZERO( zone, sizeof ( *zone ) );
zone->memory = memory;
if ( FT_NEW_ARRAY( zone->org, maxPoints ) ||
FT_NEW_ARRAY( zone->cur, maxPoints ) ||
FT_NEW_ARRAY( zone->orus, maxPoints ) ||
FT_NEW_ARRAY( zone->tags, maxPoints ) ||
FT_NEW_ARRAY( zone->contours, maxContours ) )
{
tt_glyphzone_done( zone );
}
else
{
zone->max_points = maxPoints;
zone->max_contours = maxContours;
}
return error;
}
/* Compare the face with a list of well-known `tricky' fonts. */
/* This list shall be expanded as we find more of them. */
static FT_Bool
tt_check_trickyness_family( FT_String* name )
{
#define TRICK_NAMES_MAX_CHARACTERS 16
#define TRICK_NAMES_COUNT 8
static const char trick_names[TRICK_NAMES_COUNT]
[TRICK_NAMES_MAX_CHARACTERS + 1] =
{
/* dfkaisb.ttf */
"DFKaiSho-SB",
"DFKaiShu",
/* kaiu.ttf */
"DFKai-SB",
/* htkt2.ttf */
"HuaTianKaiTi?",
/* htst3.ttf */
"HuaTianSongTi?",
/* mingliu.ttf & mingliu.ttc */
"MingLiU",
/* mingliu.ttc */
"PMingLiU",
/* mingli.ttf */
"MingLi43",
};
int nn;
for ( nn = 0; nn < TRICK_NAMES_COUNT; nn++ )
if ( ft_strstr( name, trick_names[nn] ) )
return TRUE;
return FALSE;
}
/* XXX: This function should be in the `sfnt' module. */
/* Some PDF generators clear the checksums in the TrueType header table. */
/* For example, Quartz ContextPDF clears all entries, or Bullzip PDF */
/* Printer clears the entries for subsetted subtables. We thus have to */
/* recalculate the checksums where necessary. */
static FT_UInt32
tt_synth_sfnt_checksum( FT_Stream stream,
FT_ULong length )
{
FT_Error error;
FT_UInt32 checksum = 0;
int i;
if ( FT_FRAME_ENTER( length ) )
return 0;
for ( ; length > 3; length -= 4 )
checksum += (FT_UInt32)FT_GET_ULONG();
for ( i = 3; length > 0; length --, i-- )
checksum += (FT_UInt32)( FT_GET_BYTE() << ( i * 8 ) );
FT_FRAME_EXIT();
return checksum;
}
/* XXX: This function should be in the `sfnt' module. */
static FT_ULong
tt_get_sfnt_checksum( TT_Face face,
FT_UShort i )
{
/* if we believe the written value, use following part. */
#if 0
if ( face->dir_tables[i].CheckSum )
return face->dir_tables[i].CheckSum;
#endif
if ( !face->goto_table )
return 0;
if ( face->goto_table( face,
face->dir_tables[i].Tag,
face->root.stream,
NULL ) )
return 0;
return (FT_ULong)tt_synth_sfnt_checksum( face->root.stream,
face->dir_tables[i].Length );
}
typedef struct tt_sfnt_id_rec_
{
FT_ULong CheckSum;
FT_ULong Length;
} tt_sfnt_id_rec;
static FT_Bool
tt_check_trickyness_sfnt_ids( TT_Face face )
{
#define TRICK_SFNT_IDS_PER_FACE 3
#define TRICK_SFNT_IDS_NUM_FACES 17
static const tt_sfnt_id_rec sfnt_id[TRICK_SFNT_IDS_NUM_FACES]
[TRICK_SFNT_IDS_PER_FACE] = {
#define TRICK_SFNT_ID_cvt 0
#define TRICK_SFNT_ID_fpgm 1
#define TRICK_SFNT_ID_prep 2
/* MingLiU 1995 */
{
/* cvt */
{ 0x05bcf058, 0x000002e4 },
/* fpgm */
{ 0x28233bf1, 0x000087c4 },
/* prep */
{ 0xa344a1ea, 0x000001e1 }
},
/* MingLiU 1996- */
{
/* cvt */
{ 0x05bcf058, 0x000002e4 },
/* fpgm */
{ 0x28233bf1, 0x000087c4 },
/* prep */
{ 0xa344a1eb, 0x000001e1 }
},
/* DFKaiShu */
{
/* cvt */
{ 0x11e5ead4, 0x00000350 },
/* fpgm */
{ 0x5a30ca3b, 0x00009063 },
/* prep */
{ 0x13a42602, 0x0000007e }
},
/* HuaTianKaiTi */
{
/* cvt */
{ 0xfffbfffc, 0x00000008 },
/* fpgm */
{ 0x9c9e48b8, 0x0000bea2 },
/* prep */
{ 0x70020112, 0x00000008 }
},
/* HuaTianSongTi */
{
/* cvt */
{ 0xfffbfffc, 0x00000008 },
/* fpgm */
{ 0x0a5a0483, 0x00017c39 },
/* prep */
{ 0x70020112, 0x00000008 }
},
/* NEC fadpop7.ttf */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x40c92555, 0x000000e5 },
/* prep */
{ 0xa39b58e3, 0x0000117c }
},
/* NEC fadrei5.ttf */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x33c41652, 0x000000e5 },
/* prep */
{ 0x26d6c52a, 0x00000f6a }
},
/* NEC fangot7.ttf */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x6db1651d, 0x0000019d },
/* prep */
{ 0x6c6e4b03, 0x00002492 }
},
/* NEC fangyo5.ttf */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x40c92555, 0x000000e5 },
/* prep */
{ 0xde51fad0, 0x0000117c }
},
/* NEC fankyo5.ttf */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x85e47664, 0x000000e5 },
/* prep */
{ 0xa6c62831, 0x00001caa }
},
/* NEC fanrgo5.ttf */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x2d891cfd, 0x0000019d },
/* prep */
{ 0xa0604633, 0x00001de8 }
},
/* NEC fangot5.ttc */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x40aa774c, 0x000001cb },
/* prep */
{ 0x9b5caa96, 0x00001f9a }
},
/* NEC fanmin3.ttc */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x0d3de9cb, 0x00000141 },
/* prep */
{ 0xd4127766, 0x00002280 }
},
/* NEC FA-Gothic, 1996 */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x4a692698, 0x000001f0 },
/* prep */
{ 0x340d4346, 0x00001fca }
},
/* NEC FA-Minchou, 1996 */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0xcd34c604, 0x00000166 },
/* prep */
{ 0x6cf31046, 0x000022b0 }
},
/* NEC FA-RoundGothicB, 1996 */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0x5da75315, 0x0000019d },
/* prep */
{ 0x40745a5f, 0x000022e0 }
},
/* NEC FA-RoundGothicM, 1996 */
{
/* cvt */
{ 0x00000000, 0x00000000 },
/* fpgm */
{ 0xf055fc48, 0x000001c2 },
/* prep */
{ 0x3900ded3, 0x00001e18 }
}
};
FT_ULong checksum;
int num_matched_ids[TRICK_SFNT_IDS_NUM_FACES];
FT_Bool has_cvt, has_fpgm, has_prep;
FT_UShort i;
int j, k;
FT_MEM_SET( num_matched_ids, 0,
sizeof ( int ) * TRICK_SFNT_IDS_NUM_FACES );
has_cvt = FALSE;
has_fpgm = FALSE;
has_prep = FALSE;
for ( i = 0; i < face->num_tables; i++ )
{
checksum = 0;
switch( face->dir_tables[i].Tag )
{
case TTAG_cvt:
k = TRICK_SFNT_ID_cvt;
has_cvt = TRUE;
break;
case TTAG_fpgm:
k = TRICK_SFNT_ID_fpgm;
has_fpgm = TRUE;
break;
case TTAG_prep:
k = TRICK_SFNT_ID_prep;
has_prep = TRUE;
break;
default:
continue;
}
for ( j = 0; j < TRICK_SFNT_IDS_NUM_FACES; j++ )
if ( face->dir_tables[i].Length == sfnt_id[j][k].Length )
{
if ( !checksum )
checksum = tt_get_sfnt_checksum( face, i );
if ( sfnt_id[j][k].CheckSum == checksum )
num_matched_ids[j]++;
if ( num_matched_ids[j] == TRICK_SFNT_IDS_PER_FACE )
return TRUE;
}
}
for ( j = 0; j < TRICK_SFNT_IDS_NUM_FACES; j++ )
{
if ( !has_cvt && !sfnt_id[j][TRICK_SFNT_ID_cvt].Length )
num_matched_ids[j] ++;
if ( !has_fpgm && !sfnt_id[j][TRICK_SFNT_ID_fpgm].Length )
num_matched_ids[j] ++;
if ( !has_prep && !sfnt_id[j][TRICK_SFNT_ID_prep].Length )
num_matched_ids[j] ++;
if ( num_matched_ids[j] == TRICK_SFNT_IDS_PER_FACE )
return TRUE;
}
return FALSE;
}
static FT_Bool
tt_check_trickyness( FT_Face face )
{
if ( !face )
return FALSE;
/* For first, check the face name for quick check. */
if ( face->family_name &&
tt_check_trickyness_family( face->family_name ) )
return TRUE;
/* Type42 fonts may lack `name' tables, we thus try to identify */
/* tricky fonts by checking the checksums of Type42-persistent */
/* sfnt tables (`cvt', `fpgm', and `prep'). */
if ( tt_check_trickyness_sfnt_ids( (TT_Face)face ) )
return TRUE;
return FALSE;
}
/* Check whether `.notdef' is the only glyph in the `loca' table. */
static FT_Bool
tt_check_single_notdef( FT_Face ttface )
{
FT_Bool result = FALSE;
TT_Face face = (TT_Face)ttface;
FT_UInt asize;
FT_ULong i;
FT_ULong glyph_index = 0;
FT_UInt count = 0;
for( i = 0; i < face->num_locations; i++ )
{
tt_face_get_location( face, i, &asize );
if ( asize > 0 )
{
count += 1;
if ( count > 1 )
break;
glyph_index = i;
}
}
/* Only have a single outline. */
if ( count == 1 )
{
if ( glyph_index == 0 )
result = TRUE;
else
{
/* FIXME: Need to test glyphname == .notdef ? */
FT_Error error;
char buf[8];
error = FT_Get_Glyph_Name( ttface, glyph_index, buf, 8 );
if ( !error &&
buf[0] == '.' && !ft_strncmp( buf, ".notdef", 8 ) )
result = TRUE;
}
}
return result;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_init */
/* */
/* <Description> */
/* Initialize a given TrueType face object. */
/* */
/* <Input> */
/* stream :: The source font stream. */
/* */
/* face_index :: The index of the font face in the resource. */
/* */
/* num_params :: Number of additional generic parameters. Ignored. */
/* */
/* params :: Additional generic parameters. Ignored. */
/* */
/* <InOut> */
/* face :: The newly built face object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_init( FT_Stream stream,
/* TT_Face */
FT_Face ttface,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
FT_Error error;
FT_Library library;
SFNT_Service sfnt;
TT_Face face = (TT_Face)ttface;
FT_TRACE2(( "TTF driver\n" ));
library = ttface->driver->root.library;
sfnt = (SFNT_Service)FT_Get_Module_Interface( library, "sfnt" );
if ( !sfnt )
{
FT_ERROR(( "tt_face_init: cannot access `sfnt' module\n" ));
error = TT_Err_Missing_Module;
goto Exit;
}
/* create input stream from resource */
if ( FT_STREAM_SEEK( 0 ) )
goto Exit;
/* check that we have a valid TrueType file */
error = sfnt->init_face( stream, face, face_index, num_params, params );
if ( error )
goto Exit;
/* We must also be able to accept Mac/GX fonts, as well as OT ones. */
/* The 0x00020000 tag is completely undocumented; some fonts from */
/* Arphic made for Chinese Windows 3.1 have this. */
/* MS fonts */
if ( face->format_tag != 0x00010000L &&
/* CJK fonts for Win 3.1 */
face->format_tag != 0x00020000L &&
/* Mac fonts */
face->format_tag != TTAG_true )
{
FT_TRACE2(( " not a TTF font\n" ));
goto Bad_Format;
}
ttface->face_flags |= FT_FACE_FLAG_HINTER;
/* If we are performing a simple font format check, exit immediately. */
if ( face_index < 0 )
return TT_Err_Ok;
/* Load font directory */
error = sfnt->load_face( stream, face, face_index, num_params, params );
if ( error )
goto Exit;
if ( tt_check_trickyness( ttface ) )
ttface->face_flags |= FT_FACE_FLAG_TRICKY;
error = tt_face_load_hdmx( face, stream );
if ( error )
goto Exit;
if ( FT_IS_SCALABLE( ttface ) )
{
if ( !ttface->internal->incremental_interface )
error = tt_face_load_loca( face, stream );
if ( !error )
error = tt_face_load_cvt( face, stream );
if ( !error )
error = tt_face_load_fpgm( face, stream );
if ( !error )
error = tt_face_load_prep( face, stream );
/* Check the scalable flag based on `loca'. */
if ( !ttface->internal->incremental_interface &&
ttface->num_fixed_sizes &&
face->glyph_locations &&
tt_check_single_notdef( ttface ) )
{
FT_TRACE5(( "tt_face_init:"
" Only the `.notdef' glyph has an outline.\n"
" "
" Resetting scalable flag to FALSE.\n" ));
ttface->face_flags &= ~FT_FACE_FLAG_SCALABLE;
}
}
#if defined( TT_CONFIG_OPTION_UNPATENTED_HINTING ) && \
!defined( TT_CONFIG_OPTION_BYTECODE_INTERPRETER )
{
FT_Bool unpatented_hinting;
int i;
/* Determine whether unpatented hinting is to be used for this face. */
unpatented_hinting = FT_BOOL
( library->debug_hooks[FT_DEBUG_HOOK_UNPATENTED_HINTING] != NULL );
for ( i = 0; i < num_params && !face->unpatented_hinting; i++ )
if ( params[i].tag == FT_PARAM_TAG_UNPATENTED_HINTING )
unpatented_hinting = TRUE;
if ( !unpatented_hinting )
ttface->internal->ignore_unpatented_hinter = TRUE;
}
/* TT_CONFIG_OPTION_UNPATENTED_HINTING &&
!TT_CONFIG_OPTION_BYTECODE_INTERPRETER */
#endif
/* initialize standard glyph loading routines */
TT_Init_Glyph_Loading( face );
Exit:
return error;
Bad_Format:
error = TT_Err_Unknown_File_Format;
goto Exit;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_done */
/* */
/* <Description> */
/* Finalize a given face object. */
/* */
/* <Input> */
/* face :: A pointer to the face object to destroy. */
/* */
FT_LOCAL_DEF( void )
/* TT_Face */
tt_face_done( FT_Face ttface )
{
TT_Face face = (TT_Face)ttface;
FT_Memory memory;
FT_Stream stream;
SFNT_Service sfnt;
if ( !face )
return;
memory = ttface->memory;
stream = ttface->stream;
sfnt = (SFNT_Service)face->sfnt;
/* for `extended TrueType formats' (i.e. compressed versions) */
if ( face->extra.finalizer )
face->extra.finalizer( face->extra.data );
if ( sfnt )
sfnt->done_face( face );
/* freeing the locations table */
tt_face_done_loca( face );
tt_face_free_hdmx( face );
/* freeing the CVT */
FT_FREE( face->cvt );
face->cvt_size = 0;
/* freeing the programs */
FT_FRAME_RELEASE( face->font_program );
FT_FRAME_RELEASE( face->cvt_program );
face->font_program_size = 0;
face->cvt_program_size = 0;
tt_done_blend( memory, face->blend );
face->blend = NULL;
}
/*************************************************************************/
/* */
/* SIZE FUNCTIONS */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* tt_size_run_fpgm */
/* */
/* <Description> */
/* Run the font program. */
/* */
/* <Input> */
/* size :: A handle to the size object. */
/* */
/* pedantic :: Set if bytecode execution should be pedantic. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_size_run_fpgm( TT_Size size,
FT_Bool pedantic )
{
TT_Face face = (TT_Face)size->root.face;
TT_ExecContext exec;
FT_Error error;
/* debugging instances have their own context */
if ( size->debug )
exec = size->context;
else
exec = ( (TT_Driver)FT_FACE_DRIVER( face ) )->context;
if ( !exec )
return TT_Err_Could_Not_Find_Context;
TT_Load_Context( exec, face, size );
exec->callTop = 0;
exec->top = 0;
exec->period = 64;
exec->phase = 0;
exec->threshold = 0;
exec->instruction_trap = FALSE;
exec->F_dot_P = 0x4000L;
exec->pedantic_hinting = pedantic;
{
FT_Size_Metrics* metrics = &exec->metrics;
TT_Size_Metrics* tt_metrics = &exec->tt_metrics;
metrics->x_ppem = 0;
metrics->y_ppem = 0;
metrics->x_scale = 0;
metrics->y_scale = 0;
tt_metrics->ppem = 0;
tt_metrics->scale = 0;
tt_metrics->ratio = 0x10000L;
}
/* allow font program execution */
TT_Set_CodeRange( exec,
tt_coderange_font,
face->font_program,
face->font_program_size );
/* disable CVT and glyph programs coderange */
TT_Clear_CodeRange( exec, tt_coderange_cvt );
TT_Clear_CodeRange( exec, tt_coderange_glyph );
if ( face->font_program_size > 0 )
{
error = TT_Goto_CodeRange( exec, tt_coderange_font, 0 );
if ( !error )
{
FT_TRACE4(( "Executing `fpgm' table.\n" ));
error = face->interpreter( exec );
}
}
else
error = TT_Err_Ok;
if ( !error )
TT_Save_Context( exec, size );
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_size_run_prep */
/* */
/* <Description> */
/* Run the control value program. */
/* */
/* <Input> */
/* size :: A handle to the size object. */
/* */
/* pedantic :: Set if bytecode execution should be pedantic. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_size_run_prep( TT_Size size,
FT_Bool pedantic )
{
TT_Face face = (TT_Face)size->root.face;
TT_ExecContext exec;
FT_Error error;
/* debugging instances have their own context */
if ( size->debug )
exec = size->context;
else
exec = ( (TT_Driver)FT_FACE_DRIVER( face ) )->context;
if ( !exec )
return TT_Err_Could_Not_Find_Context;
TT_Load_Context( exec, face, size );
exec->callTop = 0;
exec->top = 0;
exec->instruction_trap = FALSE;
exec->pedantic_hinting = pedantic;
TT_Set_CodeRange( exec,
tt_coderange_cvt,
face->cvt_program,
face->cvt_program_size );
TT_Clear_CodeRange( exec, tt_coderange_glyph );
if ( face->cvt_program_size > 0 )
{
error = TT_Goto_CodeRange( exec, tt_coderange_cvt, 0 );
if ( !error && !size->debug )
{
FT_TRACE4(( "Executing `prep' table.\n" ));
error = face->interpreter( exec );
}
}
else
error = TT_Err_Ok;
/* save as default graphics state */
size->GS = exec->GS;
TT_Save_Context( exec, size );
return error;
}
static void
tt_size_done_bytecode( FT_Size ftsize )
{
TT_Size size = (TT_Size)ftsize;
TT_Face face = (TT_Face)ftsize->face;
FT_Memory memory = face->root.memory;
if ( size->debug )
{
/* the debug context must be deleted by the debugger itself */
size->context = NULL;
size->debug = FALSE;
}
FT_FREE( size->cvt );
size->cvt_size = 0;
/* free storage area */
FT_FREE( size->storage );
size->storage_size = 0;
/* twilight zone */
tt_glyphzone_done( &size->twilight );
FT_FREE( size->function_defs );
FT_FREE( size->instruction_defs );
size->num_function_defs = 0;
size->max_function_defs = 0;
size->num_instruction_defs = 0;
size->max_instruction_defs = 0;
size->max_func = 0;
size->max_ins = 0;
size->bytecode_ready = 0;
size->cvt_ready = 0;
}
/* Initialize bytecode-related fields in the size object. */
/* We do this only if bytecode interpretation is really needed. */
static FT_Error
tt_size_init_bytecode( FT_Size ftsize,
FT_Bool pedantic )
{
FT_Error error;
TT_Size size = (TT_Size)ftsize;
TT_Face face = (TT_Face)ftsize->face;
FT_Memory memory = face->root.memory;
FT_Int i;
FT_UShort n_twilight;
TT_MaxProfile* maxp = &face->max_profile;
size->bytecode_ready = 1;
size->cvt_ready = 0;
size->max_function_defs = maxp->maxFunctionDefs;
size->max_instruction_defs = maxp->maxInstructionDefs;
size->num_function_defs = 0;
size->num_instruction_defs = 0;
size->max_func = 0;
size->max_ins = 0;
size->cvt_size = face->cvt_size;
size->storage_size = maxp->maxStorage;
/* Set default metrics */
{
TT_Size_Metrics* metrics = &size->ttmetrics;
metrics->rotated = FALSE;
metrics->stretched = FALSE;
/* set default compensation (all 0) */
for ( i = 0; i < 4; i++ )
metrics->compensations[i] = 0;
}
/* allocate function defs, instruction defs, cvt, and storage area */
if ( FT_NEW_ARRAY( size->function_defs, size->max_function_defs ) ||
FT_NEW_ARRAY( size->instruction_defs, size->max_instruction_defs ) ||
FT_NEW_ARRAY( size->cvt, size->cvt_size ) ||
FT_NEW_ARRAY( size->storage, size->storage_size ) )
goto Exit;
/* reserve twilight zone */
n_twilight = maxp->maxTwilightPoints;
/* there are 4 phantom points (do we need this?) */
n_twilight += 4;
error = tt_glyphzone_new( memory, n_twilight, 0, &size->twilight );
if ( error )
goto Exit;
size->twilight.n_points = n_twilight;
size->GS = tt_default_graphics_state;
/* set `face->interpreter' according to the debug hook present */
{
FT_Library library = face->root.driver->root.library;
face->interpreter = (TT_Interpreter)
library->debug_hooks[FT_DEBUG_HOOK_TRUETYPE];
if ( !face->interpreter )
face->interpreter = (TT_Interpreter)TT_RunIns;
}
/* Fine, now run the font program! */
error = tt_size_run_fpgm( size, pedantic );
Exit:
if ( error )
tt_size_done_bytecode( ftsize );
return error;
}
FT_LOCAL_DEF( FT_Error )
tt_size_ready_bytecode( TT_Size size,
FT_Bool pedantic )
{
FT_Error error = TT_Err_Ok;
if ( !size->bytecode_ready )
{
error = tt_size_init_bytecode( (FT_Size)size, pedantic );
if ( error )
goto Exit;
}
/* rescale CVT when needed */
if ( !size->cvt_ready )
{
FT_UInt i;
TT_Face face = (TT_Face)size->root.face;
/* Scale the cvt values to the new ppem. */
/* We use by default the y ppem to scale the CVT. */
for ( i = 0; i < size->cvt_size; i++ )
size->cvt[i] = FT_MulFix( face->cvt[i], size->ttmetrics.scale );
/* all twilight points are originally zero */
for ( i = 0; i < (FT_UInt)size->twilight.n_points; i++ )
{
size->twilight.org[i].x = 0;
size->twilight.org[i].y = 0;
size->twilight.cur[i].x = 0;
size->twilight.cur[i].y = 0;
}
/* clear storage area */
for ( i = 0; i < (FT_UInt)size->storage_size; i++ )
size->storage[i] = 0;
size->GS = tt_default_graphics_state;
error = tt_size_run_prep( size, pedantic );
if ( !error )
size->cvt_ready = 1;
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_size_init */
/* */
/* <Description> */
/* Initialize a new TrueType size object. */
/* */
/* <InOut> */
/* size :: A handle to the size object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
/* TT_Size */
tt_size_init( FT_Size ttsize )
{
TT_Size size = (TT_Size)ttsize;
FT_Error error = TT_Err_Ok;
size->bytecode_ready = 0;
size->cvt_ready = 0;
size->ttmetrics.valid = FALSE;
size->strike_index = 0xFFFFFFFFUL;
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_size_done */
/* */
/* <Description> */
/* The TrueType size object finalizer. */
/* */
/* <Input> */
/* size :: A handle to the target size object. */
/* */
FT_LOCAL_DEF( void )
/* TT_Size */
tt_size_done( FT_Size ttsize )
{
TT_Size size = (TT_Size)ttsize;
if ( size->bytecode_ready )
tt_size_done_bytecode( ttsize );
size->ttmetrics.valid = FALSE;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_size_reset */
/* */
/* <Description> */
/* Reset a TrueType size when resolutions and character dimensions */
/* have been changed. */
/* */
/* <Input> */
/* size :: A handle to the target size object. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_size_reset( TT_Size size )
{
TT_Face face;
FT_Error error = TT_Err_Ok;
FT_Size_Metrics* metrics;
size->ttmetrics.valid = FALSE;
face = (TT_Face)size->root.face;
metrics = &size->metrics;
/* copy the result from base layer */
*metrics = size->root.metrics;
if ( metrics->x_ppem < 1 || metrics->y_ppem < 1 )
return TT_Err_Invalid_PPem;
/* This bit flag, if set, indicates that the ppems must be */
/* rounded to integers. Nearly all TrueType fonts have this bit */
/* set, as hinting won't work really well otherwise. */
/* */
if ( face->header.Flags & 8 )
{
metrics->x_scale = FT_DivFix( metrics->x_ppem << 6,
face->root.units_per_EM );
metrics->y_scale = FT_DivFix( metrics->y_ppem << 6,
face->root.units_per_EM );
metrics->ascender =
FT_PIX_ROUND( FT_MulFix( face->root.ascender, metrics->y_scale ) );
metrics->descender =
FT_PIX_ROUND( FT_MulFix( face->root.descender, metrics->y_scale ) );
metrics->height =
FT_PIX_ROUND( FT_MulFix( face->root.height, metrics->y_scale ) );
metrics->max_advance =
FT_PIX_ROUND( FT_MulFix( face->root.max_advance_width,
metrics->x_scale ) );
}
/* compute new transformation */
if ( metrics->x_ppem >= metrics->y_ppem )
{
size->ttmetrics.scale = metrics->x_scale;
size->ttmetrics.ppem = metrics->x_ppem;
size->ttmetrics.x_ratio = 0x10000L;
size->ttmetrics.y_ratio = FT_DivFix( metrics->y_ppem,
metrics->x_ppem );
}
else
{
size->ttmetrics.scale = metrics->y_scale;
size->ttmetrics.ppem = metrics->y_ppem;
size->ttmetrics.x_ratio = FT_DivFix( metrics->x_ppem,
metrics->y_ppem );
size->ttmetrics.y_ratio = 0x10000L;
}
size->cvt_ready = 0;
if ( !error )
size->ttmetrics.valid = TRUE;
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_driver_init */
/* */
/* <Description> */
/* Initialize a given TrueType driver object. */
/* */
/* <Input> */
/* driver :: A handle to the target driver object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
/* TT_Driver */
tt_driver_init( FT_Module ttdriver )
{
TT_Driver driver = (TT_Driver)ttdriver;
if ( !TT_New_Context( driver ) )
return TT_Err_Could_Not_Find_Context;
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_driver_done */
/* */
/* <Description> */
/* Finalize a given TrueType driver. */
/* */
/* <Input> */
/* driver :: A handle to the target TrueType driver. */
/* */
FT_LOCAL_DEF( void )
/* TT_Driver */
tt_driver_done( FT_Module ttdriver )
{
TT_Driver driver = (TT_Driver)ttdriver;
/* destroy the execution context */
if ( driver->context )
{
TT_Done_Context( driver->context );
driver->context = NULL;
}
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_slot_init */
/* */
/* <Description> */
/* Initialize a new slot object. */
/* */
/* <InOut> */
/* slot :: A handle to the slot object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_slot_init( FT_GlyphSlot slot )
{
return FT_GlyphLoader_CreateExtra( slot->internal->loader );
}
/* END */
/***************************************************************************/
/* */
/* ttinterp.c */
/* */
/* TrueType bytecode interpreter (body). */
/* */
/* Copyright 1996-2012 */
/* by David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* Greg Hitchcock from Microsoft has helped a lot in resolving unclear */
/* issues; many thanks! */
#define xxxSPH_DEBUG
#define xxxSPH_DEBUG_MORE_VERBOSE
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttinterp
/*************************************************************************/
/* */
/* In order to detect infinite loops in the code, we set up a counter */
/* within the run loop. A single stroke of interpretation is now */
/* limited to a maximum number of opcodes defined below. */
/* */
#define MAX_RUNNABLE_OPCODES 1000000L
/*************************************************************************/
/* */
/* There are two kinds of implementations: */
/* */
/* a. static implementation */
/* */
/* The current execution context is a static variable, which fields */
/* are accessed directly by the interpreter during execution. The */
/* context is named `cur'. */
/* */
/* This version is non-reentrant, of course. */
/* */
/* b. indirect implementation */
/* */
/* The current execution context is passed to _each_ function as its */
/* first argument, and each field is thus accessed indirectly. */
/* */
/* This version is fully re-entrant. */
/* */
/* The idea is that an indirect implementation may be slower to execute */
/* on low-end processors that are used in some systems (like 386s or */
/* even 486s). */
/* */
/* As a consequence, the indirect implementation is now the default, as */
/* its performance costs can be considered negligible in our context. */
/* Note, however, that we kept the same source with macros because: */
/* */
/* - The code is kept very close in design to the Pascal code used for */
/* development. */
/* */
/* - It's much more readable that way! */
/* */
/* - It's still open to experimentation and tuning. */
/* */
/*************************************************************************/
/* indirect implementation */
#ifndef TT_CONFIG_OPTION_STATIC_INTERPRETER
/* see ttobjs.h */
#define CUR (*exc)
/*************************************************************************/
/* */
/* This macro is used whenever `exec' is unused in a function, to avoid */
/* stupid warnings from pedantic compilers. */
/* */
#define FT_UNUSED_EXEC FT_UNUSED( exc )
/* static implementation */
#else
#define CUR cur
#define FT_UNUSED_EXEC int __dummy = __dummy
static
/* static exec. context variable */
TT_ExecContextRec cur;
/* apparently, we have a _lot_ of direct indexing when accessing */
/* the static `cur', which makes the code bigger (due to all the */
/* four bytes addresses). */
/* TT_CONFIG_OPTION_STATIC_INTERPRETER */
#endif
/*************************************************************************/
/* */
/* The instruction argument stack. */
/* */
/* see ttobjs.h for EXEC_OP_ */
#define INS_ARG EXEC_OP_ FT_Long* args
/*************************************************************************/
/* */
/* This macro is used whenever `args' is unused in a function, to avoid */
/* stupid warnings from pedantic compilers. */
/* */
#define FT_UNUSED_ARG FT_UNUSED_EXEC; FT_UNUSED( args )
/*************************************************************************/
/* */
/* The following macros hide the use of EXEC_ARG and EXEC_ARG_ to */
/* increase readability of the code. */
/* */
/*************************************************************************/
#define SKIP_Code() \
SkipCode( EXEC_ARG )
#define GET_ShortIns() \
GetShortIns( EXEC_ARG )
#define NORMalize( x, y, v ) \
Normalize( EXEC_ARG_ x, y, v )
#define SET_SuperRound( scale, flags ) \
SetSuperRound( EXEC_ARG_ scale, flags )
#define ROUND_None( d, c ) \
Round_None( EXEC_ARG_ d, c )
#define INS_Goto_CodeRange( range, ip ) \
Ins_Goto_CodeRange( EXEC_ARG_ range, ip )
#define CUR_Func_move( z, p, d ) \
CUR.func_move( EXEC_ARG_ z, p, d )
#define CUR_Func_move_orig( z, p, d ) \
CUR.func_move_orig( EXEC_ARG_ z, p, d )
#define CUR_Func_round( d, c ) \
CUR.func_round( EXEC_ARG_ d, c )
#define CUR_Func_read_cvt( index ) \
CUR.func_read_cvt( EXEC_ARG_ index )
#define CUR_Func_write_cvt( index, val ) \
CUR.func_write_cvt( EXEC_ARG_ index, val )
#define CUR_Func_move_cvt( index, val ) \
CUR.func_move_cvt( EXEC_ARG_ index, val )
#define CURRENT_Ratio() \
Current_Ratio( EXEC_ARG )
#define CURRENT_Ppem() \
Current_Ppem( EXEC_ARG )
#define CUR_Ppem() \
Cur_PPEM( EXEC_ARG )
#define INS_SxVTL( a, b, c, d ) \
Ins_SxVTL( EXEC_ARG_ a, b, c, d )
#define COMPUTE_Funcs() \
Compute_Funcs( EXEC_ARG )
#define COMPUTE_Round( a ) \
Compute_Round( EXEC_ARG_ a )
#define COMPUTE_Point_Displacement( a, b, c, d ) \
Compute_Point_Displacement( EXEC_ARG_ a, b, c, d )
#define MOVE_Zp2_Point( a, b, c, t ) \
Move_Zp2_Point( EXEC_ARG_ a, b, c, t )
#define CUR_Func_project( v1, v2 ) \
CUR.func_project( EXEC_ARG_ (v1)->x - (v2)->x, (v1)->y - (v2)->y )
#define CUR_Func_dualproj( v1, v2 ) \
CUR.func_dualproj( EXEC_ARG_ (v1)->x - (v2)->x, (v1)->y - (v2)->y )
#define CUR_fast_project( v ) \
CUR.func_project( EXEC_ARG_ (v)->x, (v)->y )
#define CUR_fast_dualproj( v ) \
CUR.func_dualproj( EXEC_ARG_ (v)->x, (v)->y )
/*************************************************************************/
/* */
/* Instruction dispatch function, as used by the interpreter. */
/* */
typedef void (*TInstruction_Function)( INS_ARG );
/*************************************************************************/
/* */
/* Two simple bounds-checking macros. */
/* */
#define BOUNDS( x, n ) ( (FT_UInt)(x) >= (FT_UInt)(n) )
#define BOUNDSL( x, n ) ( (FT_ULong)(x) >= (FT_ULong)(n) )
/*************************************************************************/
/* */
/* This macro computes (a*2^14)/b and complements TT_MulFix14. */
/* */
#define TT_DivFix14( a, b ) \
FT_DivFix( a, (b) << 2 )
#undef SUCCESS
#define SUCCESS 0
#undef FAILURE
#define FAILURE 1
#define GUESS_VECTOR( V )
/*************************************************************************/
/* */
/* CODERANGE FUNCTIONS */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* TT_Goto_CodeRange */
/* */
/* <Description> */
/* Switches to a new code range (updates the code related elements in */
/* `exec', and `IP'). */
/* */
/* <Input> */
/* range :: The new execution code range. */
/* */
/* IP :: The new IP in the new code range. */
/* */
/* <InOut> */
/* exec :: The target execution context. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Goto_CodeRange( TT_ExecContext exec,
FT_Int range,
FT_Long IP )
{
TT_CodeRange* coderange;
FT_ASSERT( range >= 1 && range <= 3 );
coderange = &exec->codeRangeTable[range - 1];
FT_ASSERT( coderange->base != NULL );
/* NOTE: Because the last instruction of a program may be a CALL */
/* which will return to the first byte *after* the code */
/* range, we test for IP <= Size instead of IP < Size. */
/* */
FT_ASSERT( (FT_ULong)IP <= coderange->size );
exec->code = coderange->base;
exec->codeSize = coderange->size;
exec->IP = IP;
exec->curRange = range;
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Set_CodeRange */
/* */
/* <Description> */
/* Sets a code range. */
/* */
/* <Input> */
/* range :: The code range index. */
/* */
/* base :: The new code base. */
/* */
/* length :: The range size in bytes. */
/* */
/* <InOut> */
/* exec :: The target execution context. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Set_CodeRange( TT_ExecContext exec,
FT_Int range,
void* base,
FT_Long length )
{
FT_ASSERT( range >= 1 && range <= 3 );
exec->codeRangeTable[range - 1].base = (FT_Byte*)base;
exec->codeRangeTable[range - 1].size = length;
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Clear_CodeRange */
/* */
/* <Description> */
/* Clears a code range. */
/* */
/* <Input> */
/* range :: The code range index. */
/* */
/* <InOut> */
/* exec :: The target execution context. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* Does not set the Error variable. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Clear_CodeRange( TT_ExecContext exec,
FT_Int range )
{
FT_ASSERT( range >= 1 && range <= 3 );
exec->codeRangeTable[range - 1].base = NULL;
exec->codeRangeTable[range - 1].size = 0;
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* EXECUTION CONTEXT ROUTINES */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* TT_Done_Context */
/* */
/* <Description> */
/* Destroys a given context. */
/* */
/* <Input> */
/* exec :: A handle to the target execution context. */
/* */
/* memory :: A handle to the parent memory object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* Only the glyph loader and debugger should call this function. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Done_Context( TT_ExecContext exec )
{
FT_Memory memory = exec->memory;
/* points zone */
exec->maxPoints = 0;
exec->maxContours = 0;
/* free stack */
FT_FREE( exec->stack );
exec->stackSize = 0;
/* free call stack */
FT_FREE( exec->callStack );
exec->callSize = 0;
exec->callTop = 0;
/* free glyph code range */
FT_FREE( exec->glyphIns );
exec->glyphSize = 0;
exec->size = NULL;
exec->face = NULL;
FT_FREE( exec );
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* Init_Context */
/* */
/* <Description> */
/* Initializes a context object. */
/* */
/* <Input> */
/* memory :: A handle to the parent memory object. */
/* */
/* <InOut> */
/* exec :: A handle to the target execution context. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
static FT_Error
Init_Context( TT_ExecContext exec,
FT_Memory memory )
{
FT_Error error;
FT_TRACE1(( "Init_Context: new object at 0x%08p\n", exec ));
exec->memory = memory;
exec->callSize = 32;
if ( FT_NEW_ARRAY( exec->callStack, exec->callSize ) )
goto Fail_Memory;
/* all values in the context are set to 0 already, but this is */
/* here as a remainder */
exec->maxPoints = 0;
exec->maxContours = 0;
exec->stackSize = 0;
exec->glyphSize = 0;
exec->stack = NULL;
exec->glyphIns = NULL;
exec->face = NULL;
exec->size = NULL;
return TT_Err_Ok;
Fail_Memory:
FT_ERROR(( "Init_Context: not enough memory for %p\n", exec ));
TT_Done_Context( exec );
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* Update_Max */
/* */
/* <Description> */
/* Checks the size of a buffer and reallocates it if necessary. */
/* */
/* <Input> */
/* memory :: A handle to the parent memory object. */
/* */
/* multiplier :: The size in bytes of each element in the buffer. */
/* */
/* new_max :: The new capacity (size) of the buffer. */
/* */
/* <InOut> */
/* size :: The address of the buffer's current size expressed */
/* in elements. */
/* */
/* buff :: The address of the buffer base pointer. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
Update_Max( FT_Memory memory,
FT_ULong* size,
FT_Long multiplier,
void* _pbuff,
FT_ULong new_max )
{
FT_Error error;
void** pbuff = (void**)_pbuff;
if ( *size < new_max )
{
if ( FT_REALLOC( *pbuff, *size * multiplier, new_max * multiplier ) )
return error;
*size = new_max;
}
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Load_Context */
/* */
/* <Description> */
/* Prepare an execution context for glyph hinting. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* size :: A handle to the source size object. */
/* */
/* <InOut> */
/* exec :: A handle to the target execution context. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* Only the glyph loader and debugger should call this function. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Load_Context( TT_ExecContext exec,
TT_Face face,
TT_Size size )
{
FT_Int i;
FT_ULong tmp;
TT_MaxProfile* maxp;
FT_Error error;
exec->face = face;
maxp = &face->max_profile;
exec->size = size;
if ( size )
{
exec->numFDefs = size->num_function_defs;
exec->maxFDefs = size->max_function_defs;
exec->numIDefs = size->num_instruction_defs;
exec->maxIDefs = size->max_instruction_defs;
exec->FDefs = size->function_defs;
exec->IDefs = size->instruction_defs;
exec->tt_metrics = size->ttmetrics;
exec->metrics = size->metrics;
exec->maxFunc = size->max_func;
exec->maxIns = size->max_ins;
for ( i = 0; i < TT_MAX_CODE_RANGES; i++ )
exec->codeRangeTable[i] = size->codeRangeTable[i];
/* set graphics state */
exec->GS = size->GS;
exec->cvtSize = size->cvt_size;
exec->cvt = size->cvt;
exec->storeSize = size->storage_size;
exec->storage = size->storage;
exec->twilight = size->twilight;
/* In case of multi-threading it can happen that the old size object */
/* no longer exists, thus we must clear all glyph zone references. */
ft_memset( &exec->zp0, 0, sizeof ( exec->zp0 ) );
exec->zp1 = exec->zp0;
exec->zp2 = exec->zp0;
}
/* XXX: We reserve a little more elements on the stack to deal safely */
/* with broken fonts like arialbs, courbs, timesbs, etc. */
tmp = exec->stackSize;
error = Update_Max( exec->memory,
&tmp,
sizeof ( FT_F26Dot6 ),
(void*)&exec->stack,
maxp->maxStackElements + 32 );
exec->stackSize = (FT_UInt)tmp;
if ( error )
return error;
tmp = exec->glyphSize;
error = Update_Max( exec->memory,
&tmp,
sizeof ( FT_Byte ),
(void*)&exec->glyphIns,
maxp->maxSizeOfInstructions );
exec->glyphSize = (FT_UShort)tmp;
if ( error )
return error;
exec->pts.n_points = 0;
exec->pts.n_contours = 0;
exec->zp1 = exec->pts;
exec->zp2 = exec->pts;
exec->zp0 = exec->pts;
exec->instruction_trap = FALSE;
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Save_Context */
/* */
/* <Description> */
/* Saves the code ranges in a `size' object. */
/* */
/* <Input> */
/* exec :: A handle to the source execution context. */
/* */
/* <InOut> */
/* size :: A handle to the target size object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* Only the glyph loader and debugger should call this function. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Save_Context( TT_ExecContext exec,
TT_Size size )
{
FT_Int i;
/* XXX: Will probably disappear soon with all the code range */
/* management, which is now rather obsolete. */
/* */
size->num_function_defs = exec->numFDefs;
size->num_instruction_defs = exec->numIDefs;
size->max_func = exec->maxFunc;
size->max_ins = exec->maxIns;
for ( i = 0; i < TT_MAX_CODE_RANGES; i++ )
size->codeRangeTable[i] = exec->codeRangeTable[i];
return TT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Run_Context */
/* */
/* <Description> */
/* Executes one or more instructions in the execution context. */
/* */
/* <Input> */
/* debug :: A Boolean flag. If set, the function sets some internal */
/* variables and returns immediately, otherwise TT_RunIns() */
/* is called. */
/* */
/* This is commented out currently. */
/* */
/* <Input> */
/* exec :: A handle to the target execution context. */
/* */
/* <Return> */
/* TrueType error code. 0 means success. */
/* */
/* <Note> */
/* Only the glyph loader and debugger should call this function. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Run_Context( TT_ExecContext exec,
FT_Bool debug )
{
FT_Error error;
if ( ( error = TT_Goto_CodeRange( exec, tt_coderange_glyph, 0 ) )
!= TT_Err_Ok )
return error;
exec->zp0 = exec->pts;
exec->zp1 = exec->pts;
exec->zp2 = exec->pts;
exec->GS.gep0 = 1;
exec->GS.gep1 = 1;
exec->GS.gep2 = 1;
exec->GS.projVector.x = 0x4000;
exec->GS.projVector.y = 0x0000;
exec->GS.freeVector = exec->GS.projVector;
exec->GS.dualVector = exec->GS.projVector;
exec->GS.round_state = 1;
exec->GS.loop = 1;
/* some glyphs leave something on the stack. so we clean it */
/* before a new execution. */
exec->top = 0;
exec->callTop = 0;
#if 1
FT_UNUSED( debug );
return exec->face->interpreter( exec );
#else
if ( !debug )
return TT_RunIns( exec );
else
return TT_Err_Ok;
#endif
}
/* The default value for `scan_control' is documented as FALSE in the */
/* TrueType specification. This is confusing since it implies a */
/* Boolean value. However, this is not the case, thus both the */
/* default values of our `scan_type' and `scan_control' fields (which */
/* the documentation's `scan_control' variable is split into) are */
/* zero. */
const TT_GraphicsState tt_default_graphics_state =
{
0, 0, 0,
{ 0x4000, 0 },
{ 0x4000, 0 },
{ 0x4000, 0 },
1, 64, 1,
TRUE, 68, 0, 0, 9, 3,
0, FALSE, 0, 1, 1, 1
};
/* documentation is in ttinterp.h */
FT_EXPORT_DEF( TT_ExecContext )
TT_New_Context( TT_Driver driver )
{
TT_ExecContext exec;
FT_Memory memory;
memory = driver->root.root.memory;
exec = driver->context;
if ( !driver->context )
{
FT_Error error;
/* allocate object */
if ( FT_NEW( exec ) )
goto Fail;
/* initialize it; in case of error this deallocates `exec' too */
error = Init_Context( exec, memory );
if ( error )
goto Fail;
/* store it into the driver */
driver->context = exec;
}
return driver->context;
Fail:
return NULL;
}
/*************************************************************************/
/* */
/* Before an opcode is executed, the interpreter verifies that there are */
/* enough arguments on the stack, with the help of the `Pop_Push_Count' */
/* table. */
/* */
/* For each opcode, the first column gives the number of arguments that */
/* are popped from the stack; the second one gives the number of those */
/* that are pushed in result. */
/* */
/* Opcodes which have a varying number of parameters in the data stream */
/* (NPUSHB, NPUSHW) are handled specially; they have a negative value in */
/* the `opcode_length' table, and the value in `Pop_Push_Count' is set */
/* to zero. */
/* */
/*************************************************************************/
#undef PACK
#define PACK( x, y ) ( ( x << 4 ) | y )
static
const FT_Byte Pop_Push_Count[256] =
{
/* opcodes are gathered in groups of 16 */
/* please keep the spaces as they are */
/* SVTCA y */ PACK( 0, 0 ),
/* SVTCA x */ PACK( 0, 0 ),
/* SPvTCA y */ PACK( 0, 0 ),
/* SPvTCA x */ PACK( 0, 0 ),
/* SFvTCA y */ PACK( 0, 0 ),
/* SFvTCA x */ PACK( 0, 0 ),
/* SPvTL // */ PACK( 2, 0 ),
/* SPvTL + */ PACK( 2, 0 ),
/* SFvTL // */ PACK( 2, 0 ),
/* SFvTL + */ PACK( 2, 0 ),
/* SPvFS */ PACK( 2, 0 ),
/* SFvFS */ PACK( 2, 0 ),
/* GPV */ PACK( 0, 2 ),
/* GFV */ PACK( 0, 2 ),
/* SFvTPv */ PACK( 0, 0 ),
/* ISECT */ PACK( 5, 0 ),
/* SRP0 */ PACK( 1, 0 ),
/* SRP1 */ PACK( 1, 0 ),
/* SRP2 */ PACK( 1, 0 ),
/* SZP0 */ PACK( 1, 0 ),
/* SZP1 */ PACK( 1, 0 ),
/* SZP2 */ PACK( 1, 0 ),
/* SZPS */ PACK( 1, 0 ),
/* SLOOP */ PACK( 1, 0 ),
/* RTG */ PACK( 0, 0 ),
/* RTHG */ PACK( 0, 0 ),
/* SMD */ PACK( 1, 0 ),
/* ELSE */ PACK( 0, 0 ),
/* JMPR */ PACK( 1, 0 ),
/* SCvTCi */ PACK( 1, 0 ),
/* SSwCi */ PACK( 1, 0 ),
/* SSW */ PACK( 1, 0 ),
/* DUP */ PACK( 1, 2 ),
/* POP */ PACK( 1, 0 ),
/* CLEAR */ PACK( 0, 0 ),
/* SWAP */ PACK( 2, 2 ),
/* DEPTH */ PACK( 0, 1 ),
/* CINDEX */ PACK( 1, 1 ),
/* MINDEX */ PACK( 1, 0 ),
/* AlignPTS */ PACK( 2, 0 ),
/* INS_$28 */ PACK( 0, 0 ),
/* UTP */ PACK( 1, 0 ),
/* LOOPCALL */ PACK( 2, 0 ),
/* CALL */ PACK( 1, 0 ),
/* FDEF */ PACK( 1, 0 ),
/* ENDF */ PACK( 0, 0 ),
/* MDAP[0] */ PACK( 1, 0 ),
/* MDAP[1] */ PACK( 1, 0 ),
/* IUP[0] */ PACK( 0, 0 ),
/* IUP[1] */ PACK( 0, 0 ),
/* SHP[0] */ PACK( 0, 0 ),
/* SHP[1] */ PACK( 0, 0 ),
/* SHC[0] */ PACK( 1, 0 ),
/* SHC[1] */ PACK( 1, 0 ),
/* SHZ[0] */ PACK( 1, 0 ),
/* SHZ[1] */ PACK( 1, 0 ),
/* SHPIX */ PACK( 1, 0 ),
/* IP */ PACK( 0, 0 ),
/* MSIRP[0] */ PACK( 2, 0 ),
/* MSIRP[1] */ PACK( 2, 0 ),
/* AlignRP */ PACK( 0, 0 ),
/* RTDG */ PACK( 0, 0 ),
/* MIAP[0] */ PACK( 2, 0 ),
/* MIAP[1] */ PACK( 2, 0 ),
/* NPushB */ PACK( 0, 0 ),
/* NPushW */ PACK( 0, 0 ),
/* WS */ PACK( 2, 0 ),
/* RS */ PACK( 1, 1 ),
/* WCvtP */ PACK( 2, 0 ),
/* RCvt */ PACK( 1, 1 ),
/* GC[0] */ PACK( 1, 1 ),
/* GC[1] */ PACK( 1, 1 ),
/* SCFS */ PACK( 2, 0 ),
/* MD[0] */ PACK( 2, 1 ),
/* MD[1] */ PACK( 2, 1 ),
/* MPPEM */ PACK( 0, 1 ),
/* MPS */ PACK( 0, 1 ),
/* FlipON */ PACK( 0, 0 ),
/* FlipOFF */ PACK( 0, 0 ),
/* DEBUG */ PACK( 1, 0 ),
/* LT */ PACK( 2, 1 ),
/* LTEQ */ PACK( 2, 1 ),
/* GT */ PACK( 2, 1 ),
/* GTEQ */ PACK( 2, 1 ),
/* EQ */ PACK( 2, 1 ),
/* NEQ */ PACK( 2, 1 ),
/* ODD */ PACK( 1, 1 ),
/* EVEN */ PACK( 1, 1 ),
/* IF */ PACK( 1, 0 ),
/* EIF */ PACK( 0, 0 ),
/* AND */ PACK( 2, 1 ),
/* OR */ PACK( 2, 1 ),
/* NOT */ PACK( 1, 1 ),
/* DeltaP1 */ PACK( 1, 0 ),
/* SDB */ PACK( 1, 0 ),
/* SDS */ PACK( 1, 0 ),
/* ADD */ PACK( 2, 1 ),
/* SUB */ PACK( 2, 1 ),
/* DIV */ PACK( 2, 1 ),
/* MUL */ PACK( 2, 1 ),
/* ABS */ PACK( 1, 1 ),
/* NEG */ PACK( 1, 1 ),
/* FLOOR */ PACK( 1, 1 ),
/* CEILING */ PACK( 1, 1 ),
/* ROUND[0] */ PACK( 1, 1 ),
/* ROUND[1] */ PACK( 1, 1 ),
/* ROUND[2] */ PACK( 1, 1 ),
/* ROUND[3] */ PACK( 1, 1 ),
/* NROUND[0] */ PACK( 1, 1 ),
/* NROUND[1] */ PACK( 1, 1 ),
/* NROUND[2] */ PACK( 1, 1 ),
/* NROUND[3] */ PACK( 1, 1 ),
/* WCvtF */ PACK( 2, 0 ),
/* DeltaP2 */ PACK( 1, 0 ),
/* DeltaP3 */ PACK( 1, 0 ),
/* DeltaCn[0] */ PACK( 1, 0 ),
/* DeltaCn[1] */ PACK( 1, 0 ),
/* DeltaCn[2] */ PACK( 1, 0 ),
/* SROUND */ PACK( 1, 0 ),
/* S45Round */ PACK( 1, 0 ),
/* JROT */ PACK( 2, 0 ),
/* JROF */ PACK( 2, 0 ),
/* ROFF */ PACK( 0, 0 ),
/* INS_$7B */ PACK( 0, 0 ),
/* RUTG */ PACK( 0, 0 ),
/* RDTG */ PACK( 0, 0 ),
/* SANGW */ PACK( 1, 0 ),
/* AA */ PACK( 1, 0 ),
/* FlipPT */ PACK( 0, 0 ),
/* FlipRgON */ PACK( 2, 0 ),
/* FlipRgOFF */ PACK( 2, 0 ),
/* INS_$83 */ PACK( 0, 0 ),
/* INS_$84 */ PACK( 0, 0 ),
/* ScanCTRL */ PACK( 1, 0 ),
/* SDPVTL[0] */ PACK( 2, 0 ),
/* SDPVTL[1] */ PACK( 2, 0 ),
/* GetINFO */ PACK( 1, 1 ),
/* IDEF */ PACK( 1, 0 ),
/* ROLL */ PACK( 3, 3 ),
/* MAX */ PACK( 2, 1 ),
/* MIN */ PACK( 2, 1 ),
/* ScanTYPE */ PACK( 1, 0 ),
/* InstCTRL */ PACK( 2, 0 ),
/* INS_$8F */ PACK( 0, 0 ),
/* INS_$90 */ PACK( 0, 0 ),
/* INS_$91 */ PACK( 0, 0 ),
/* INS_$92 */ PACK( 0, 0 ),
/* INS_$93 */ PACK( 0, 0 ),
/* INS_$94 */ PACK( 0, 0 ),
/* INS_$95 */ PACK( 0, 0 ),
/* INS_$96 */ PACK( 0, 0 ),
/* INS_$97 */ PACK( 0, 0 ),
/* INS_$98 */ PACK( 0, 0 ),
/* INS_$99 */ PACK( 0, 0 ),
/* INS_$9A */ PACK( 0, 0 ),
/* INS_$9B */ PACK( 0, 0 ),
/* INS_$9C */ PACK( 0, 0 ),
/* INS_$9D */ PACK( 0, 0 ),
/* INS_$9E */ PACK( 0, 0 ),
/* INS_$9F */ PACK( 0, 0 ),
/* INS_$A0 */ PACK( 0, 0 ),
/* INS_$A1 */ PACK( 0, 0 ),
/* INS_$A2 */ PACK( 0, 0 ),
/* INS_$A3 */ PACK( 0, 0 ),
/* INS_$A4 */ PACK( 0, 0 ),
/* INS_$A5 */ PACK( 0, 0 ),
/* INS_$A6 */ PACK( 0, 0 ),
/* INS_$A7 */ PACK( 0, 0 ),
/* INS_$A8 */ PACK( 0, 0 ),
/* INS_$A9 */ PACK( 0, 0 ),
/* INS_$AA */ PACK( 0, 0 ),
/* INS_$AB */ PACK( 0, 0 ),
/* INS_$AC */ PACK( 0, 0 ),
/* INS_$AD */ PACK( 0, 0 ),
/* INS_$AE */ PACK( 0, 0 ),
/* INS_$AF */ PACK( 0, 0 ),
/* PushB[0] */ PACK( 0, 1 ),
/* PushB[1] */ PACK( 0, 2 ),
/* PushB[2] */ PACK( 0, 3 ),
/* PushB[3] */ PACK( 0, 4 ),
/* PushB[4] */ PACK( 0, 5 ),
/* PushB[5] */ PACK( 0, 6 ),
/* PushB[6] */ PACK( 0, 7 ),
/* PushB[7] */ PACK( 0, 8 ),
/* PushW[0] */ PACK( 0, 1 ),
/* PushW[1] */ PACK( 0, 2 ),
/* PushW[2] */ PACK( 0, 3 ),
/* PushW[3] */ PACK( 0, 4 ),
/* PushW[4] */ PACK( 0, 5 ),
/* PushW[5] */ PACK( 0, 6 ),
/* PushW[6] */ PACK( 0, 7 ),
/* PushW[7] */ PACK( 0, 8 ),
/* MDRP[00] */ PACK( 1, 0 ),
/* MDRP[01] */ PACK( 1, 0 ),
/* MDRP[02] */ PACK( 1, 0 ),
/* MDRP[03] */ PACK( 1, 0 ),
/* MDRP[04] */ PACK( 1, 0 ),
/* MDRP[05] */ PACK( 1, 0 ),
/* MDRP[06] */ PACK( 1, 0 ),
/* MDRP[07] */ PACK( 1, 0 ),
/* MDRP[08] */ PACK( 1, 0 ),
/* MDRP[09] */ PACK( 1, 0 ),
/* MDRP[10] */ PACK( 1, 0 ),
/* MDRP[11] */ PACK( 1, 0 ),
/* MDRP[12] */ PACK( 1, 0 ),
/* MDRP[13] */ PACK( 1, 0 ),
/* MDRP[14] */ PACK( 1, 0 ),
/* MDRP[15] */ PACK( 1, 0 ),
/* MDRP[16] */ PACK( 1, 0 ),
/* MDRP[17] */ PACK( 1, 0 ),
/* MDRP[18] */ PACK( 1, 0 ),
/* MDRP[19] */ PACK( 1, 0 ),
/* MDRP[20] */ PACK( 1, 0 ),
/* MDRP[21] */ PACK( 1, 0 ),
/* MDRP[22] */ PACK( 1, 0 ),
/* MDRP[23] */ PACK( 1, 0 ),
/* MDRP[24] */ PACK( 1, 0 ),
/* MDRP[25] */ PACK( 1, 0 ),
/* MDRP[26] */ PACK( 1, 0 ),
/* MDRP[27] */ PACK( 1, 0 ),
/* MDRP[28] */ PACK( 1, 0 ),
/* MDRP[29] */ PACK( 1, 0 ),
/* MDRP[30] */ PACK( 1, 0 ),
/* MDRP[31] */ PACK( 1, 0 ),
/* MIRP[00] */ PACK( 2, 0 ),
/* MIRP[01] */ PACK( 2, 0 ),
/* MIRP[02] */ PACK( 2, 0 ),
/* MIRP[03] */ PACK( 2, 0 ),
/* MIRP[04] */ PACK( 2, 0 ),
/* MIRP[05] */ PACK( 2, 0 ),
/* MIRP[06] */ PACK( 2, 0 ),
/* MIRP[07] */ PACK( 2, 0 ),
/* MIRP[08] */ PACK( 2, 0 ),
/* MIRP[09] */ PACK( 2, 0 ),
/* MIRP[10] */ PACK( 2, 0 ),
/* MIRP[11] */ PACK( 2, 0 ),
/* MIRP[12] */ PACK( 2, 0 ),
/* MIRP[13] */ PACK( 2, 0 ),
/* MIRP[14] */ PACK( 2, 0 ),
/* MIRP[15] */ PACK( 2, 0 ),
/* MIRP[16] */ PACK( 2, 0 ),
/* MIRP[17] */ PACK( 2, 0 ),
/* MIRP[18] */ PACK( 2, 0 ),
/* MIRP[19] */ PACK( 2, 0 ),
/* MIRP[20] */ PACK( 2, 0 ),
/* MIRP[21] */ PACK( 2, 0 ),
/* MIRP[22] */ PACK( 2, 0 ),
/* MIRP[23] */ PACK( 2, 0 ),
/* MIRP[24] */ PACK( 2, 0 ),
/* MIRP[25] */ PACK( 2, 0 ),
/* MIRP[26] */ PACK( 2, 0 ),
/* MIRP[27] */ PACK( 2, 0 ),
/* MIRP[28] */ PACK( 2, 0 ),
/* MIRP[29] */ PACK( 2, 0 ),
/* MIRP[30] */ PACK( 2, 0 ),
/* MIRP[31] */ PACK( 2, 0 )
};
static
const FT_Char opcode_length[256] =
{
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-1,-2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2, 3, 4, 5, 6, 7, 8, 9, 3, 5, 7, 9, 11,13,15,17,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1
};
#undef PACK
#if 1
static FT_Int32
TT_MulFix14( FT_Int32 a,
FT_Int b )
{
FT_Int32 sign;
FT_UInt32 ah, al, mid, lo, hi;
sign = a ^ b;
if ( a < 0 )
a = -a;
if ( b < 0 )
b = -b;
ah = (FT_UInt32)( ( a >> 16 ) & 0xFFFFU );
al = (FT_UInt32)( a & 0xFFFFU );
lo = al * b;
mid = ah * b;
hi = mid >> 16;
/* rounding */
mid = ( mid << 16 ) + ( 1 << 13 );
lo += mid;
if ( lo < mid )
hi += 1;
mid = ( lo >> 14 ) | ( hi << 18 );
return sign >= 0 ? (FT_Int32)mid : -(FT_Int32)mid;
}
#else
/* compute (a*b)/2^14 with maximum accuracy and rounding */
static FT_Int32
TT_MulFix14( FT_Int32 a,
FT_Int b )
{
FT_Int32 m, s, hi;
FT_UInt32 l, lo;
/* compute ax*bx as 64-bit value */
l = (FT_UInt32)( ( a & 0xFFFFU ) * b );
m = ( a >> 16 ) * b;
lo = l + (FT_UInt32)( m << 16 );
hi = ( m >> 16 ) + ( (FT_Int32)l >> 31 ) + ( lo < l );
/* divide the result by 2^14 with rounding */
s = hi >> 31;
l = lo + (FT_UInt32)s;
hi += s + ( l < lo );
lo = l;
l = lo + 0x2000U;
hi += l < lo;
return ( hi << 18 ) | ( l >> 14 );
}
#endif
/* compute (ax*bx+ay*by)/2^14 with maximum accuracy and rounding */
static FT_Int32
TT_DotFix14( FT_Int32 ax,
FT_Int32 ay,
FT_Int bx,
FT_Int by )
{
FT_Int32 m, s, hi1, hi2, hi;
FT_UInt32 l, lo1, lo2, lo;
/* compute ax*bx as 64-bit value */
l = (FT_UInt32)( ( ax & 0xFFFFU ) * bx );
m = ( ax >> 16 ) * bx;
lo1 = l + (FT_UInt32)( m << 16 );
hi1 = ( m >> 16 ) + ( (FT_Int32)l >> 31 ) + ( lo1 < l );
/* compute ay*by as 64-bit value */
l = (FT_UInt32)( ( ay & 0xFFFFU ) * by );
m = ( ay >> 16 ) * by;
lo2 = l + (FT_UInt32)( m << 16 );
hi2 = ( m >> 16 ) + ( (FT_Int32)l >> 31 ) + ( lo2 < l );
/* add them */
lo = lo1 + lo2;
hi = hi1 + hi2 + ( lo < lo1 );
/* divide the result by 2^14 with rounding */
s = hi >> 31;
l = lo + (FT_UInt32)s;
hi += s + ( l < lo );
lo = l;
l = lo + 0x2000U;
hi += ( l < lo );
return ( hi << 18 ) | ( l >> 14 );
}
/* return length of given vector */
#if 0
static FT_Int32
TT_VecLen( FT_Int32 x,
FT_Int32 y )
{
FT_Int32 m, hi1, hi2, hi;
FT_UInt32 l, lo1, lo2, lo;
/* compute x*x as 64-bit value */
lo = (FT_UInt32)( x & 0xFFFFU );
hi = x >> 16;
l = lo * lo;
m = hi * lo;
hi = hi * hi;
lo1 = l + (FT_UInt32)( m << 17 );
hi1 = hi + ( m >> 15 ) + ( lo1 < l );
/* compute y*y as 64-bit value */
lo = (FT_UInt32)( y & 0xFFFFU );
hi = y >> 16;
l = lo * lo;
m = hi * lo;
hi = hi * hi;
lo2 = l + (FT_UInt32)( m << 17 );
hi2 = hi + ( m >> 15 ) + ( lo2 < l );
/* add them to get 'x*x+y*y' as 64-bit value */
lo = lo1 + lo2;
hi = hi1 + hi2 + ( lo < lo1 );
/* compute the square root of this value */
{
FT_UInt32 root, rem, test_div;
FT_Int count;
root = 0;
{
rem = 0;
count = 32;
do
{
rem = ( rem << 2 ) | ( (FT_UInt32)hi >> 30 );
hi = ( hi << 2 ) | ( lo >> 30 );
lo <<= 2;
root <<= 1;
test_div = ( root << 1 ) + 1;
if ( rem >= test_div )
{
rem -= test_div;
root += 1;
}
} while ( --count );
}
return (FT_Int32)root;
}
}
#else
/* this version uses FT_Vector_Length which computes the same value */
/* much, much faster.. */
/* */
static FT_F26Dot6
TT_VecLen( FT_F26Dot6 X,
FT_F26Dot6 Y )
{
FT_Vector v;
v.x = X;
v.y = Y;
return FT_Vector_Length( &v );
}
#endif
/*************************************************************************/
/* */
/* <Function> */
/* Current_Ratio */
/* */
/* <Description> */
/* Returns the current aspect ratio scaling factor depending on the */
/* projection vector's state and device resolutions. */
/* */
/* <Return> */
/* The aspect ratio in 16.16 format, always <= 1.0 . */
/* */
static FT_Long
Current_Ratio( EXEC_OP )
{
if ( !CUR.tt_metrics.ratio )
{
{
if ( CUR.GS.projVector.y == 0 )
CUR.tt_metrics.ratio = CUR.tt_metrics.x_ratio;
else if ( CUR.GS.projVector.x == 0 )
CUR.tt_metrics.ratio = CUR.tt_metrics.y_ratio;
else
{
FT_F26Dot6 x, y;
x = TT_MulFix14( CUR.tt_metrics.x_ratio,
CUR.GS.projVector.x );
y = TT_MulFix14( CUR.tt_metrics.y_ratio,
CUR.GS.projVector.y );
CUR.tt_metrics.ratio = TT_VecLen( x, y );
}
}
}
return CUR.tt_metrics.ratio;
}
static FT_Long
Current_Ppem( EXEC_OP )
{
return FT_MulFix( CUR.tt_metrics.ppem, CURRENT_Ratio() );
}
/*************************************************************************/
/* */
/* Functions related to the control value table (CVT). */
/* */
/*************************************************************************/
FT_CALLBACK_DEF( FT_F26Dot6 )
Read_CVT( EXEC_OP_ FT_ULong idx )
{
return CUR.cvt[idx];
}
FT_CALLBACK_DEF( FT_F26Dot6 )
Read_CVT_Stretched( EXEC_OP_ FT_ULong idx )
{
return FT_MulFix( CUR.cvt[idx], CURRENT_Ratio() );
}
FT_CALLBACK_DEF( void )
Write_CVT( EXEC_OP_ FT_ULong idx,
FT_F26Dot6 value )
{
CUR.cvt[idx] = value;
}
FT_CALLBACK_DEF( void )
Write_CVT_Stretched( EXEC_OP_ FT_ULong idx,
FT_F26Dot6 value )
{
CUR.cvt[idx] = FT_DivFix( value, CURRENT_Ratio() );
}
FT_CALLBACK_DEF( void )
Move_CVT( EXEC_OP_ FT_ULong idx,
FT_F26Dot6 value )
{
CUR.cvt[idx] += value;
}
FT_CALLBACK_DEF( void )
Move_CVT_Stretched( EXEC_OP_ FT_ULong idx,
FT_F26Dot6 value )
{
CUR.cvt[idx] += FT_DivFix( value, CURRENT_Ratio() );
}
/*************************************************************************/
/* */
/* <Function> */
/* GetShortIns */
/* */
/* <Description> */
/* Returns a short integer taken from the instruction stream at */
/* address IP. */
/* */
/* <Return> */
/* Short read at code[IP]. */
/* */
/* <Note> */
/* This one could become a macro. */
/* */
static FT_Short
GetShortIns( EXEC_OP )
{
/* Reading a byte stream so there is no endianess (DaveP) */
CUR.IP += 2;
return (FT_Short)( ( CUR.code[CUR.IP - 2] << 8 ) +
CUR.code[CUR.IP - 1] );
}
/*************************************************************************/
/* */
/* <Function> */
/* Ins_Goto_CodeRange */
/* */
/* <Description> */
/* Goes to a certain code range in the instruction stream. */
/* */
/* <Input> */
/* aRange :: The index of the code range. */
/* */
/* aIP :: The new IP address in the code range. */
/* */
/* <Return> */
/* SUCCESS or FAILURE. */
/* */
static FT_Bool
Ins_Goto_CodeRange( EXEC_OP_ FT_Int aRange,
FT_ULong aIP )
{
TT_CodeRange* range;
if ( aRange < 1 || aRange > 3 )
{
CUR.error = TT_Err_Bad_Argument;
return FAILURE;
}
range = &CUR.codeRangeTable[aRange - 1];
/* invalid coderange */
if ( range->base == NULL )
{
CUR.error = TT_Err_Invalid_CodeRange;
return FAILURE;
}
/* NOTE: Because the last instruction of a program may be a CALL */
/* which will return to the first byte *after* the code */
/* range, we test for aIP <= Size, instead of aIP < Size. */
if ( aIP > range->size )
{
CUR.error = TT_Err_Code_Overflow;
return FAILURE;
}
CUR.code = range->base;
CUR.codeSize = range->size;
CUR.IP = aIP;
CUR.curRange = aRange;
return SUCCESS;
}
/*************************************************************************/
/* */
/* <Function> */
/* Direct_Move */
/* */
/* <Description> */
/* Moves a point by a given distance along the freedom vector. The */
/* point will be `touched'. */
/* */
/* <Input> */
/* point :: The index of the point to move. */
/* */
/* distance :: The distance to apply. */
/* */
/* <InOut> */
/* zone :: The affected glyph zone. */
/* */
static void
Direct_Move( EXEC_OP_ TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_F26Dot6 v;
v = CUR.GS.freeVector.x;
if ( v != 0 )
{
zone->cur[point].x += FT_MulDiv( distance, v, CUR.F_dot_P );
zone->tags[point] |= FT_CURVE_TAG_TOUCH_X;
}
v = CUR.GS.freeVector.y;
if ( v != 0 )
{
zone->cur[point].y += FT_MulDiv( distance, v, CUR.F_dot_P );
zone->tags[point] |= FT_CURVE_TAG_TOUCH_Y;
}
}
/*************************************************************************/
/* */
/* <Function> */
/* Direct_Move_Orig */
/* */
/* <Description> */
/* Moves the *original* position of a point by a given distance along */
/* the freedom vector. Obviously, the point will not be `touched'. */
/* */
/* <Input> */
/* point :: The index of the point to move. */
/* */
/* distance :: The distance to apply. */
/* */
/* <InOut> */
/* zone :: The affected glyph zone. */
/* */
static void
Direct_Move_Orig( EXEC_OP_ TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_F26Dot6 v;
v = CUR.GS.freeVector.x;
if ( v != 0 )
zone->org[point].x += FT_MulDiv( distance, v, CUR.F_dot_P );
v = CUR.GS.freeVector.y;
if ( v != 0 )
zone->org[point].y += FT_MulDiv( distance, v, CUR.F_dot_P );
}
/*************************************************************************/
/* */
/* Special versions of Direct_Move() */
/* */
/* The following versions are used whenever both vectors are both */
/* along one of the coordinate unit vectors, i.e. in 90% of the cases. */
/* */
/*************************************************************************/
static void
Direct_Move_X( EXEC_OP_ TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_UNUSED_EXEC;
zone->cur[point].x += distance;
zone->tags[point] |= FT_CURVE_TAG_TOUCH_X;
}
static void
Direct_Move_Y( EXEC_OP_ TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_UNUSED_EXEC;
zone->cur[point].y += distance;
zone->tags[point] |= FT_CURVE_TAG_TOUCH_Y;
}
/*************************************************************************/
/* */
/* Special versions of Direct_Move_Orig() */
/* */
/* The following versions are used whenever both vectors are both */
/* along one of the coordinate unit vectors, i.e. in 90% of the cases. */
/* */
/*************************************************************************/
static void
Direct_Move_Orig_X( EXEC_OP_ TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_UNUSED_EXEC;
zone->org[point].x += distance;
}
static void
Direct_Move_Orig_Y( EXEC_OP_ TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_UNUSED_EXEC;
zone->org[point].y += distance;
}
/*************************************************************************/
/* */
/* <Function> */
/* Round_None */
/* */
/* <Description> */
/* Does not round, but adds engine compensation. */
/* */
/* <Input> */
/* distance :: The distance (not) to round. */
/* */
/* compensation :: The engine compensation. */
/* */
/* <Return> */
/* The compensated distance. */
/* */
/* <Note> */
/* The TrueType specification says very few about the relationship */
/* between rounding and engine compensation. However, it seems from */
/* the description of super round that we should add the compensation */
/* before rounding. */
/* */
static FT_F26Dot6
Round_None( EXEC_OP_ FT_F26Dot6 distance,
FT_F26Dot6 compensation )
{
FT_F26Dot6 val;
FT_UNUSED_EXEC;
if ( distance >= 0 )
{
val = distance + compensation;
if ( distance && val < 0 )
val = 0;
}
else
{
val = distance - compensation;
if ( val > 0 )
val = 0;
}
return val;
}
/*************************************************************************/
/* */
/* <Function> */
/* Round_To_Grid */
/* */
/* <Description> */
/* Rounds value to grid after adding engine compensation. */
/* */
/* <Input> */
/* distance :: The distance to round. */
/* */
/* compensation :: The engine compensation. */
/* */
/* <Return> */
/* Rounded distance. */
/* */
static FT_F26Dot6
Round_To_Grid( EXEC_OP_ FT_F26Dot6 distance,
FT_F26Dot6 compensation )
{
FT_F26Dot6 val;
FT_UNUSED_EXEC;
if ( distance >= 0 )
{
val = distance + compensation + 32;
if ( distance && val > 0 )
val &= ~63;
else
val = 0;
}
else
{
val = -FT_PIX_ROUND( compensation - distance );
if ( val > 0 )
val = 0;
}
return val;
}
/*************************************************************************/
/* */
/* <Function> */
/* Round_To_Half_Grid */
/* */
/* <Description> */
/* Rounds value to half grid after adding engine compensation. */
/* */
/* <Input> */
/* distance :: The distance to round. */
/* */
/* compensation :: The engine compensation. */
/* */
/* <Return> */
/* Rounded distance. */
/* */
static FT_F26Dot6
Round_To_Half_Grid( EXEC_OP_ FT_F26Dot6 distance,
FT_F26Dot6 compensation )
{
FT_F26Dot6 val;
FT_UNUSED_EXEC;
if ( distance >= 0 )
{
val = FT_PIX_FLOOR( distance + compensation ) + 32;
if ( distance && val < 0 )
val = 0;
}
else
{
val = -( FT_PIX_FLOOR( compensation - distance ) + 32 );
if ( val > 0 )
val = 0;
}
return val;
}
/*************************************************************************/
/* */
/* <Function> */
/* Round_Down_To_Grid */
/* */
/* <Description> */
/* Rounds value down to grid after adding engine compensation. */
/* */
/* <Input> */
/* distance :: The distance to round. */
/* */
/* compensation :: The engine compensation. */
/* */
/* <Return> */
/* Rounded distance. */
/* */
static FT_F26Dot6
Round_Down_To_Grid( EXEC_OP_ FT_F26Dot6 distance,
FT_F26Dot6 compensation )
{
FT_F26Dot6 val;
FT_UNUSED_EXEC;
if ( distance >= 0 )
{
val = distance + compensation;
if ( distance && val > 0 )
val &= ~63;
else
val = 0;
}
else
{
val = -( ( compensation - distance ) & -64 );
if ( val > 0 )
val = 0;
}
return val;
}
/*************************************************************************/
/* */
/* <Function> */
/* Round_Up_To_Grid */
/* */
/* <Description> */
/* Rounds value up to grid after adding engine compensation. */
/* */
/* <Input> */
/* distance :: The distance to round. */
/* */
/* compensation :: The engine compensation. */
/* */
/* <Return> */
/* Rounded distance. */
/* */
static FT_F26Dot6
Round_Up_To_Grid( EXEC_OP_ FT_F26Dot6 distance,
FT_F26Dot6 compensation )
{
FT_F26Dot6 val;
FT_UNUSED_EXEC;
if ( distance >= 0 )
{
val = distance + compensation + 63;
if ( distance && val > 0 )
val &= ~63;
else
val = 0;
}
else
{
val = -FT_PIX_CEIL( compensation - distance );
if ( val > 0 )
val = 0;
}
return val;
}
/*************************************************************************/
/* */
/* <Function> */
/* Round_To_Double_Grid */
/* */
/* <Description> */
/* Rounds value to double grid after adding engine compensation. */
/* */
/* <Input> */
/* distance :: The distance to round. */
/* */
/* compensation :: The engine compensation. */
/* */
/* <Return> */
/* Rounded distance. */
/* */
static FT_F26Dot6
Round_To_Double_Grid( EXEC_OP_ FT_F26Dot6 distance,
FT_F26Dot6 compensation )
{
FT_F26Dot6 val;
FT_UNUSED_EXEC;
if ( distance >= 0 )
{
val = distance + compensation + 16;
if ( distance && val > 0 )
val &= ~31;
else
val = 0;
}
else
{
val = -FT_PAD_ROUND( compensation - distance, 32 );
if ( val > 0 )
val = 0;
}
return val;
}
/*************************************************************************/
/* */
/* <Function> */
/* Round_Super */
/* */
/* <Description> */
/* Super-rounds value to grid after adding engine compensation. */
/* */
/* <Input> */
/* distance :: The distance to round. */
/* */
/* compensation :: The engine compensation. */
/* */
/* <Return> */
/* Rounded distance. */
/* */
/* <Note> */
/* The TrueType specification says very few about the relationship */
/* between rounding and engine compensation. However, it seems from */
/* the description of super round that we should add the compensation */
/* before rounding. */
/* */
static FT_F26Dot6
Round_Super( EXEC_OP_ FT_F26Dot6 distance,
FT_F26Dot6 compensation )
{
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = ( distance - CUR.phase + CUR.threshold + compensation ) &
-CUR.period;
if ( distance && val < 0 )
val = 0;
val += CUR.phase;
}
else
{
val = -( ( CUR.threshold - CUR.phase - distance + compensation ) &
-CUR.period );
if ( val > 0 )
val = 0;
val -= CUR.phase;
}
return val;
}
/*************************************************************************/
/* */
/* <Function> */
/* Round_Super_45 */
/* */
/* <Description> */
/* Super-rounds value to grid after adding engine compensation. */
/* */
/* <Input> */
/* distance :: The distance to round. */
/* */
/* compensation :: The engine compensation. */
/* */
/* <Return> */
/* Rounded distance. */
/* */
/* <Note> */
/* There is a separate function for Round_Super_45() as we may need */
/* greater precision. */
/* */
static FT_F26Dot6
Round_Super_45( EXEC_OP_ FT_F26Dot6 distance,
FT_F26Dot6 compensation )
{
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = ( ( distance - CUR.phase + CUR.threshold + compensation ) /
CUR.period ) * CUR.period;
if ( distance && val < 0 )
val = 0;
val += CUR.phase;
}
else
{
val = -( ( ( CUR.threshold - CUR.phase - distance + compensation ) /
CUR.period ) * CUR.period );
if ( val > 0 )
val = 0;
val -= CUR.phase;
}
return val;
}
/*************************************************************************/
/* */
/* <Function> */
/* Compute_Round */
/* */
/* <Description> */
/* Sets the rounding mode. */
/* */
/* <Input> */
/* round_mode :: The rounding mode to be used. */
/* */
static void
Compute_Round( EXEC_OP_ FT_Byte round_mode )
{
switch ( round_mode )
{
case TT_Round_Off:
CUR.func_round = (TT_Round_Func)Round_None;
break;
case TT_Round_To_Grid:
CUR.func_round = (TT_Round_Func)Round_To_Grid;
break;
case TT_Round_Up_To_Grid:
CUR.func_round = (TT_Round_Func)Round_Up_To_Grid;
break;
case TT_Round_Down_To_Grid:
CUR.func_round = (TT_Round_Func)Round_Down_To_Grid;
break;
case TT_Round_To_Half_Grid:
CUR.func_round = (TT_Round_Func)Round_To_Half_Grid;
break;
case TT_Round_To_Double_Grid:
CUR.func_round = (TT_Round_Func)Round_To_Double_Grid;
break;
case TT_Round_Super:
CUR.func_round = (TT_Round_Func)Round_Super;
break;
case TT_Round_Super_45:
CUR.func_round = (TT_Round_Func)Round_Super_45;
break;
}
}
/*************************************************************************/
/* */
/* <Function> */
/* SetSuperRound */
/* */
/* <Description> */
/* Sets Super Round parameters. */
/* */
/* <Input> */
/* GridPeriod :: The grid period. */
/* */
/* selector :: The SROUND opcode. */
/* */
static void
SetSuperRound( EXEC_OP_ FT_F26Dot6 GridPeriod,
FT_Long selector )
{
switch ( (FT_Int)( selector & 0xC0 ) )
{
case 0:
CUR.period = GridPeriod / 2;
break;
case 0x40:
CUR.period = GridPeriod;
break;
case 0x80:
CUR.period = GridPeriod * 2;
break;
/* This opcode is reserved, but... */
case 0xC0:
CUR.period = GridPeriod;
break;
}
switch ( (FT_Int)( selector & 0x30 ) )
{
case 0:
CUR.phase = 0;
break;
case 0x10:
CUR.phase = CUR.period / 4;
break;
case 0x20:
CUR.phase = CUR.period / 2;
break;
case 0x30:
CUR.phase = CUR.period * 3 / 4;
break;
}
if ( ( selector & 0x0F ) == 0 )
CUR.threshold = CUR.period - 1;
else
CUR.threshold = ( (FT_Int)( selector & 0x0F ) - 4 ) * CUR.period / 8;
CUR.period /= 256;
CUR.phase /= 256;
CUR.threshold /= 256;
}
/*************************************************************************/
/* */
/* <Function> */
/* Project */
/* */
/* <Description> */
/* Computes the projection of vector given by (v2-v1) along the */
/* current projection vector. */
/* */
/* <Input> */
/* v1 :: First input vector. */
/* v2 :: Second input vector. */
/* */
/* <Return> */
/* The distance in F26dot6 format. */
/* */
static FT_F26Dot6
Project( EXEC_OP_ FT_Pos dx,
FT_Pos dy )
{
return TT_DotFix14( (FT_UInt32)dx, (FT_UInt32)dy,
CUR.GS.projVector.x,
CUR.GS.projVector.y );
}
/*************************************************************************/
/* */
/* <Function> */
/* Dual_Project */
/* */
/* <Description> */
/* Computes the projection of the vector given by (v2-v1) along the */
/* current dual vector. */
/* */
/* <Input> */
/* v1 :: First input vector. */
/* v2 :: Second input vector. */
/* */
/* <Return> */
/* The distance in F26dot6 format. */
/* */
static FT_F26Dot6
Dual_Project( EXEC_OP_ FT_Pos dx,
FT_Pos dy )
{
return TT_DotFix14( (FT_UInt32)dx, (FT_UInt32)dy,
CUR.GS.dualVector.x,
CUR.GS.dualVector.y );
}
/*************************************************************************/
/* */
/* <Function> */
/* Project_x */
/* */
/* <Description> */
/* Computes the projection of the vector given by (v2-v1) along the */
/* horizontal axis. */
/* */
/* <Input> */
/* v1 :: First input vector. */
/* v2 :: Second input vector. */
/* */
/* <Return> */
/* The distance in F26dot6 format. */
/* */
static FT_F26Dot6
Project_x( EXEC_OP_ FT_Pos dx,
FT_Pos dy )
{
FT_UNUSED_EXEC;
FT_UNUSED( dy );
return dx;
}
/*************************************************************************/
/* */
/* <Function> */
/* Project_y */
/* */
/* <Description> */
/* Computes the projection of the vector given by (v2-v1) along the */
/* vertical axis. */
/* */
/* <Input> */
/* v1 :: First input vector. */
/* v2 :: Second input vector. */
/* */
/* <Return> */
/* The distance in F26dot6 format. */
/* */
static FT_F26Dot6
Project_y( EXEC_OP_ FT_Pos dx,
FT_Pos dy )
{
FT_UNUSED_EXEC;
FT_UNUSED( dx );
return dy;
}
/*************************************************************************/
/* */
/* <Function> */
/* Compute_Funcs */
/* */
/* <Description> */
/* Computes the projection and movement function pointers according */
/* to the current graphics state. */
/* */
static void
Compute_Funcs( EXEC_OP )
{
if ( CUR.GS.freeVector.x == 0x4000 )
CUR.F_dot_P = CUR.GS.projVector.x;
else if ( CUR.GS.freeVector.y == 0x4000 )
CUR.F_dot_P = CUR.GS.projVector.y;
else
CUR.F_dot_P = ( (FT_Long)CUR.GS.projVector.x * CUR.GS.freeVector.x +
(FT_Long)CUR.GS.projVector.y * CUR.GS.freeVector.y ) >>
14;
if ( CUR.GS.projVector.x == 0x4000 )
CUR.func_project = (TT_Project_Func)Project_x;
else if ( CUR.GS.projVector.y == 0x4000 )
CUR.func_project = (TT_Project_Func)Project_y;
else
CUR.func_project = (TT_Project_Func)Project;
if ( CUR.GS.dualVector.x == 0x4000 )
CUR.func_dualproj = (TT_Project_Func)Project_x;
else if ( CUR.GS.dualVector.y == 0x4000 )
CUR.func_dualproj = (TT_Project_Func)Project_y;
else
CUR.func_dualproj = (TT_Project_Func)Dual_Project;
CUR.func_move = (TT_Move_Func)Direct_Move;
CUR.func_move_orig = (TT_Move_Func)Direct_Move_Orig;
if ( CUR.F_dot_P == 0x4000L )
{
if ( CUR.GS.freeVector.x == 0x4000 )
{
CUR.func_move = (TT_Move_Func)Direct_Move_X;
CUR.func_move_orig = (TT_Move_Func)Direct_Move_Orig_X;
}
else if ( CUR.GS.freeVector.y == 0x4000 )
{
CUR.func_move = (TT_Move_Func)Direct_Move_Y;
CUR.func_move_orig = (TT_Move_Func)Direct_Move_Orig_Y;
}
}
/* at small sizes, F_dot_P can become too small, resulting */
/* in overflows and `spikes' in a number of glyphs like `w'. */
if ( FT_ABS( CUR.F_dot_P ) < 0x400L )
CUR.F_dot_P = 0x4000L;
/* Disable cached aspect ratio */
CUR.tt_metrics.ratio = 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* Normalize */
/* */
/* <Description> */
/* Norms a vector. */
/* */
/* <Input> */
/* Vx :: The horizontal input vector coordinate. */
/* Vy :: The vertical input vector coordinate. */
/* */
/* <Output> */
/* R :: The normed unit vector. */
/* */
/* <Return> */
/* Returns FAILURE if a vector parameter is zero. */
/* */
/* <Note> */
/* In case Vx and Vy are both zero, Normalize() returns SUCCESS, and */
/* R is undefined. */
/* */
static FT_Bool
Normalize( EXEC_OP_ FT_F26Dot6 Vx,
FT_F26Dot6 Vy,
FT_UnitVector* R )
{
FT_F26Dot6 W;
FT_Bool S1, S2;
FT_UNUSED_EXEC;
if ( FT_ABS( Vx ) < 0x10000L && FT_ABS( Vy ) < 0x10000L )
{
Vx *= 0x100;
Vy *= 0x100;
W = TT_VecLen( Vx, Vy );
if ( W == 0 )
{
/* XXX: UNDOCUMENTED! It seems that it is possible to try */
/* to normalize the vector (0,0). Return immediately. */
return SUCCESS;
}
R->x = (FT_F2Dot14)TT_DivFix14( Vx, W );
R->y = (FT_F2Dot14)TT_DivFix14( Vy, W );
return SUCCESS;
}
W = TT_VecLen( Vx, Vy );
Vx = TT_DivFix14( Vx, W );
Vy = TT_DivFix14( Vy, W );
W = Vx * Vx + Vy * Vy;
/* Now, we want that Sqrt( W ) = 0x4000 */
/* Or 0x10000000 <= W < 0x10004000 */
if ( Vx < 0 )
{
Vx = -Vx;
S1 = TRUE;
}
else
S1 = FALSE;
if ( Vy < 0 )
{
Vy = -Vy;
S2 = TRUE;
}
else
S2 = FALSE;
while ( W < 0x10000000L )
{
/* We need to increase W by a minimal amount */
if ( Vx < Vy )
Vx++;
else
Vy++;
W = Vx * Vx + Vy * Vy;
}
while ( W >= 0x10004000L )
{
/* We need to decrease W by a minimal amount */
if ( Vx < Vy )
Vx--;
else
Vy--;
W = Vx * Vx + Vy * Vy;
}
/* Note that in various cases, we can only */
/* compute a Sqrt(W) of 0x3FFF, eg. Vx = Vy */
if ( S1 )
Vx = -Vx;
if ( S2 )
Vy = -Vy;
/* Type conversion */
R->x = (FT_F2Dot14)Vx;
/* Type conversion */
R->y = (FT_F2Dot14)Vy;
return SUCCESS;
}
/*************************************************************************/
/* */
/* Here we start with the implementation of the various opcodes. */
/* */
/*************************************************************************/
static FT_Bool
Ins_SxVTL( EXEC_OP_ FT_UShort aIdx1,
FT_UShort aIdx2,
FT_Int aOpc,
FT_UnitVector* Vec )
{
FT_Long A, B, C;
FT_Vector* p1;
FT_Vector* p2;
if ( BOUNDS( aIdx1, CUR.zp2.n_points ) ||
BOUNDS( aIdx2, CUR.zp1.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return FAILURE;
}
p1 = CUR.zp1.cur + aIdx2;
p2 = CUR.zp2.cur + aIdx1;
A = p1->x - p2->x;
B = p1->y - p2->y;
/* If p1 == p2, SPVTL and SFVTL behave the same as */
/* SPVTCA[X] and SFVTCA[X], respectively. */
/* */
/* Confirmed by Greg Hitchcock. */
if ( A == 0 && B == 0 )
{
A = 0x4000;
aOpc = 0;
}
if ( ( aOpc & 1 ) != 0 )
{
/* counter clockwise rotation */
C = B;
B = A;
A = -C;
}
NORMalize( A, B, Vec );
return SUCCESS;
}
/* When not using the big switch statements, the interpreter uses a */
/* call table defined later below in this source. Each opcode must */
/* thus have a corresponding function, even trivial ones. */
/* */
/* They are all defined there. */
#define DO_SVTCA \
{ \
FT_Short A, B; \
\
\
A = (FT_Short)( CUR.opcode & 1 ) << 14; \
B = A ^ (FT_Short)0x4000; \
\
CUR.GS.freeVector.x = A; \
CUR.GS.projVector.x = A; \
CUR.GS.dualVector.x = A; \
\
CUR.GS.freeVector.y = B; \
CUR.GS.projVector.y = B; \
CUR.GS.dualVector.y = B; \
\
COMPUTE_Funcs(); \
}
#define DO_SPVTCA \
{ \
FT_Short A, B; \
\
\
A = (FT_Short)( CUR.opcode & 1 ) << 14; \
B = A ^ (FT_Short)0x4000; \
\
CUR.GS.projVector.x = A; \
CUR.GS.dualVector.x = A; \
\
CUR.GS.projVector.y = B; \
CUR.GS.dualVector.y = B; \
\
GUESS_VECTOR( freeVector ); \
\
COMPUTE_Funcs(); \
}
#define DO_SFVTCA \
{ \
FT_Short A, B; \
\
\
A = (FT_Short)( CUR.opcode & 1 ) << 14; \
B = A ^ (FT_Short)0x4000; \
\
CUR.GS.freeVector.x = A; \
CUR.GS.freeVector.y = B; \
\
GUESS_VECTOR( projVector ); \
\
COMPUTE_Funcs(); \
}
#define DO_SPVTL \
if ( INS_SxVTL( (FT_UShort)args[1], \
(FT_UShort)args[0], \
CUR.opcode, \
&CUR.GS.projVector ) == SUCCESS ) \
{ \
CUR.GS.dualVector = CUR.GS.projVector; \
GUESS_VECTOR( freeVector ); \
COMPUTE_Funcs(); \
}
#define DO_SFVTL \
if ( INS_SxVTL( (FT_UShort)args[1], \
(FT_UShort)args[0], \
CUR.opcode, \
&CUR.GS.freeVector ) == SUCCESS ) \
{ \
GUESS_VECTOR( projVector ); \
COMPUTE_Funcs(); \
}
#define DO_SFVTPV \
GUESS_VECTOR( projVector ); \
CUR.GS.freeVector = CUR.GS.projVector; \
COMPUTE_Funcs();
#define DO_SPVFS \
{ \
FT_Short S; \
FT_Long X, Y; \
\
\
/* Only use low 16bits, then sign extend */ \
S = (FT_Short)args[1]; \
Y = (FT_Long)S; \
S = (FT_Short)args[0]; \
X = (FT_Long)S; \
\
NORMalize( X, Y, &CUR.GS.projVector ); \
\
CUR.GS.dualVector = CUR.GS.projVector; \
GUESS_VECTOR( freeVector ); \
COMPUTE_Funcs(); \
}
#define DO_SFVFS \
{ \
FT_Short S; \
FT_Long X, Y; \
\
\
/* Only use low 16bits, then sign extend */ \
S = (FT_Short)args[1]; \
Y = (FT_Long)S; \
S = (FT_Short)args[0]; \
X = S; \
\
NORMalize( X, Y, &CUR.GS.freeVector ); \
GUESS_VECTOR( projVector ); \
COMPUTE_Funcs(); \
}
#define DO_GPV \
args[0] = CUR.GS.projVector.x; \
args[1] = CUR.GS.projVector.y;
#define DO_GFV \
args[0] = CUR.GS.freeVector.x; \
args[1] = CUR.GS.freeVector.y;
#define DO_SRP0 \
CUR.GS.rp0 = (FT_UShort)args[0];
#define DO_SRP1 \
CUR.GS.rp1 = (FT_UShort)args[0];
#define DO_SRP2 \
CUR.GS.rp2 = (FT_UShort)args[0];
#define DO_RTHG \
CUR.GS.round_state = TT_Round_To_Half_Grid; \
CUR.func_round = (TT_Round_Func)Round_To_Half_Grid;
#define DO_RTG \
CUR.GS.round_state = TT_Round_To_Grid; \
CUR.func_round = (TT_Round_Func)Round_To_Grid;
#define DO_RTDG \
CUR.GS.round_state = TT_Round_To_Double_Grid; \
CUR.func_round = (TT_Round_Func)Round_To_Double_Grid;
#define DO_RUTG \
CUR.GS.round_state = TT_Round_Up_To_Grid; \
CUR.func_round = (TT_Round_Func)Round_Up_To_Grid;
#define DO_RDTG \
CUR.GS.round_state = TT_Round_Down_To_Grid; \
CUR.func_round = (TT_Round_Func)Round_Down_To_Grid;
#define DO_ROFF \
CUR.GS.round_state = TT_Round_Off; \
CUR.func_round = (TT_Round_Func)Round_None;
#define DO_SROUND \
SET_SuperRound( 0x4000, args[0] ); \
CUR.GS.round_state = TT_Round_Super; \
CUR.func_round = (TT_Round_Func)Round_Super;
#define DO_S45ROUND \
SET_SuperRound( 0x2D41, args[0] ); \
CUR.GS.round_state = TT_Round_Super_45; \
CUR.func_round = (TT_Round_Func)Round_Super_45;
#define DO_SLOOP \
if ( args[0] < 0 ) \
CUR.error = TT_Err_Bad_Argument; \
else \
CUR.GS.loop = args[0];
#define DO_SMD \
CUR.GS.minimum_distance = args[0];
#define DO_SCVTCI \
CUR.GS.control_value_cutin = (FT_F26Dot6)args[0];
#define DO_SSWCI \
CUR.GS.single_width_cutin = (FT_F26Dot6)args[0];
#define DO_SSW \
CUR.GS.single_width_value = FT_MulFix( args[0], \
CUR.tt_metrics.scale );
#define DO_FLIPON \
CUR.GS.auto_flip = TRUE;
#define DO_FLIPOFF \
CUR.GS.auto_flip = FALSE;
#define DO_SDB \
CUR.GS.delta_base = (FT_Short)args[0];
#define DO_SDS \
CUR.GS.delta_shift = (FT_Short)args[0];
/* nothing */
#define DO_MD
#define DO_MPPEM \
args[0] = CURRENT_Ppem();
/* Note: The pointSize should be irrelevant in a given font program; */
/* we thus decide to return only the ppem. */
#if 0
#define DO_MPS \
args[0] = CUR.metrics.pointSize;
#else
#define DO_MPS \
args[0] = CURRENT_Ppem();
/* 0 */
#endif
#define DO_DUP \
args[1] = args[0];
#define DO_CLEAR \
CUR.new_top = 0;
#define DO_SWAP \
{ \
FT_Long L; \
\
\
L = args[0]; \
args[0] = args[1]; \
args[1] = L; \
}
#define DO_DEPTH \
args[0] = CUR.top;
#define DO_CINDEX \
{ \
FT_Long L; \
\
\
L = args[0]; \
\
if ( L <= 0 || L > CUR.args ) \
{ \
if ( CUR.pedantic_hinting ) \
CUR.error = TT_Err_Invalid_Reference; \
args[0] = 0; \
} \
else \
args[0] = CUR.stack[CUR.args - L]; \
}
#define DO_JROT \
if ( args[1] != 0 ) \
{ \
if ( args[0] == 0 && CUR.args == 0 ) \
CUR.error = TT_Err_Bad_Argument; \
CUR.IP += args[0]; \
if ( CUR.IP < 0 || \
( CUR.callTop > 0 && \
CUR.IP > CUR.callStack[CUR.callTop - 1].Cur_End ) ) \
CUR.error = TT_Err_Bad_Argument; \
CUR.step_ins = FALSE; \
}
#define DO_JMPR \
if ( args[0] == 0 && CUR.args == 0 ) \
CUR.error = TT_Err_Bad_Argument; \
CUR.IP += args[0]; \
if ( CUR.IP < 0 || \
( CUR.callTop > 0 && \
CUR.IP > CUR.callStack[CUR.callTop - 1].Cur_End ) ) \
CUR.error = TT_Err_Bad_Argument; \
CUR.step_ins = FALSE;
#define DO_JROF \
if ( args[1] == 0 ) \
{ \
if ( args[0] == 0 && CUR.args == 0 ) \
CUR.error = TT_Err_Bad_Argument; \
CUR.IP += args[0]; \
if ( CUR.IP < 0 || \
( CUR.callTop > 0 && \
CUR.IP > CUR.callStack[CUR.callTop - 1].Cur_End ) ) \
CUR.error = TT_Err_Bad_Argument; \
CUR.step_ins = FALSE; \
}
#define DO_LT \
args[0] = ( args[0] < args[1] );
#define DO_LTEQ \
args[0] = ( args[0] <= args[1] );
#define DO_GT \
args[0] = ( args[0] > args[1] );
#define DO_GTEQ \
args[0] = ( args[0] >= args[1] );
#define DO_EQ \
args[0] = ( args[0] == args[1] );
#define DO_NEQ \
args[0] = ( args[0] != args[1] );
#define DO_ODD \
args[0] = ( ( CUR_Func_round( args[0], 0 ) & 127 ) == 64 );
#define DO_EVEN \
args[0] = ( ( CUR_Func_round( args[0], 0 ) & 127 ) == 0 );
#define DO_AND \
args[0] = ( args[0] && args[1] );
#define DO_OR \
args[0] = ( args[0] || args[1] );
#define DO_NOT \
args[0] = !args[0];
#define DO_ADD \
args[0] += args[1];
#define DO_SUB \
args[0] -= args[1];
#define DO_DIV \
if ( args[1] == 0 ) \
CUR.error = TT_Err_Divide_By_Zero; \
else \
args[0] = FT_MulDiv_No_Round( args[0], 64L, args[1] );
#define DO_MUL \
args[0] = FT_MulDiv( args[0], args[1], 64L );
#define DO_ABS \
args[0] = FT_ABS( args[0] );
#define DO_NEG \
args[0] = -args[0];
#define DO_FLOOR \
args[0] = FT_PIX_FLOOR( args[0] );
#define DO_CEILING \
args[0] = FT_PIX_CEIL( args[0] );
#define DO_RS \
{ \
FT_ULong I = (FT_ULong)args[0]; \
\
\
if ( BOUNDSL( I, CUR.storeSize ) ) \
{ \
if ( CUR.pedantic_hinting ) \
{ \
ARRAY_BOUND_ERROR; \
} \
else \
args[0] = 0; \
} \
else \
args[0] = CUR.storage[I]; \
}
#define DO_WS \
{ \
FT_ULong I = (FT_ULong)args[0]; \
\
\
if ( BOUNDSL( I, CUR.storeSize ) ) \
{ \
if ( CUR.pedantic_hinting ) \
{ \
ARRAY_BOUND_ERROR; \
} \
} \
else \
CUR.storage[I] = args[1]; \
}
#define DO_RCVT \
{ \
FT_ULong I = (FT_ULong)args[0]; \
\
\
if ( BOUNDSL( I, CUR.cvtSize ) ) \
{ \
if ( CUR.pedantic_hinting ) \
{ \
ARRAY_BOUND_ERROR; \
} \
else \
args[0] = 0; \
} \
else \
args[0] = CUR_Func_read_cvt( I ); \
}
#define DO_WCVTP \
{ \
FT_ULong I = (FT_ULong)args[0]; \
\
\
if ( BOUNDSL( I, CUR.cvtSize ) ) \
{ \
if ( CUR.pedantic_hinting ) \
{ \
ARRAY_BOUND_ERROR; \
} \
} \
else \
CUR_Func_write_cvt( I, args[1] ); \
}
#define DO_WCVTF \
{ \
FT_ULong I = (FT_ULong)args[0]; \
\
\
if ( BOUNDSL( I, CUR.cvtSize ) ) \
{ \
if ( CUR.pedantic_hinting ) \
{ \
ARRAY_BOUND_ERROR; \
} \
} \
else \
CUR.cvt[I] = FT_MulFix( args[1], CUR.tt_metrics.scale ); \
}
#define DO_DEBUG \
CUR.error = TT_Err_Debug_OpCode;
#define DO_ROUND \
args[0] = CUR_Func_round( \
args[0], \
CUR.tt_metrics.compensations[CUR.opcode - 0x68] );
#define DO_NROUND \
args[0] = ROUND_None( args[0], \
CUR.tt_metrics.compensations[CUR.opcode - 0x6C] );
#define DO_MAX \
if ( args[1] > args[0] ) \
args[0] = args[1];
#define DO_MIN \
if ( args[1] < args[0] ) \
args[0] = args[1];
/*************************************************************************/
/* */
/* The following functions are called as is within the switch statement. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* MINDEX[]: Move INDEXed element */
/* Opcode range: 0x26 */
/* Stack: int32? --> StkElt */
/* */
static void
Ins_MINDEX( INS_ARG )
{
FT_Long L, K;
L = args[0];
if ( L <= 0 || L > CUR.args )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
}
else
{
K = CUR.stack[CUR.args - L];
FT_ARRAY_MOVE( &CUR.stack[CUR.args - L ],
&CUR.stack[CUR.args - L + 1],
( L - 1 ) );
CUR.stack[CUR.args - 1] = K;
}
}
/*************************************************************************/
/* */
/* ROLL[]: ROLL top three elements */
/* Opcode range: 0x8A */
/* Stack: 3 * StkElt --> 3 * StkElt */
/* */
static void
Ins_ROLL( INS_ARG )
{
FT_Long A, B, C;
FT_UNUSED_EXEC;
A = args[2];
B = args[1];
C = args[0];
args[2] = C;
args[1] = A;
args[0] = B;
}
/*************************************************************************/
/* */
/* MANAGING THE FLOW OF CONTROL */
/* */
/* Instructions appear in the specification's order. */
/* */
/*************************************************************************/
static FT_Bool
SkipCode( EXEC_OP )
{
CUR.IP += CUR.length;
if ( CUR.IP < CUR.codeSize )
{
CUR.opcode = CUR.code[CUR.IP];
CUR.length = opcode_length[CUR.opcode];
if ( CUR.length < 0 )
{
if ( CUR.IP + 1 >= CUR.codeSize )
goto Fail_Overflow;
CUR.length = 2 - CUR.length * CUR.code[CUR.IP + 1];
}
if ( CUR.IP + CUR.length <= CUR.codeSize )
return SUCCESS;
}
Fail_Overflow:
CUR.error = TT_Err_Code_Overflow;
return FAILURE;
}
/*************************************************************************/
/* */
/* IF[]: IF test */
/* Opcode range: 0x58 */
/* Stack: StkElt --> */
/* */
static void
Ins_IF( INS_ARG )
{
FT_Int nIfs;
FT_Bool Out;
if ( args[0] != 0 )
return;
nIfs = 1;
Out = 0;
do
{
if ( SKIP_Code() == FAILURE )
return;
switch ( CUR.opcode )
{
/* IF */
case 0x58:
nIfs++;
break;
/* ELSE */
case 0x1B:
Out = FT_BOOL( nIfs == 1 );
break;
/* EIF */
case 0x59:
nIfs--;
Out = FT_BOOL( nIfs == 0 );
break;
}
} while ( Out == 0 );
}
/*************************************************************************/
/* */
/* ELSE[]: ELSE */
/* Opcode range: 0x1B */
/* Stack: --> */
/* */
static void
Ins_ELSE( INS_ARG )
{
FT_Int nIfs;
FT_UNUSED_ARG;
nIfs = 1;
do
{
if ( SKIP_Code() == FAILURE )
return;
switch ( CUR.opcode )
{
/* IF */
case 0x58:
nIfs++;
break;
/* EIF */
case 0x59:
nIfs--;
break;
}
} while ( nIfs != 0 );
}
/*************************************************************************/
/* */
/* DEFINING AND USING FUNCTIONS AND INSTRUCTIONS */
/* */
/* Instructions appear in the specification's order. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* FDEF[]: Function DEFinition */
/* Opcode range: 0x2C */
/* Stack: uint32 --> */
/* */
static void
Ins_FDEF( INS_ARG )
{
FT_ULong n;
TT_DefRecord* rec;
TT_DefRecord* limit;
/* some font programs are broken enough to redefine functions! */
/* We will then parse the current table. */
rec = CUR.FDefs;
limit = rec + CUR.numFDefs;
n = args[0];
for ( ; rec < limit; rec++ )
{
if ( rec->opc == n )
break;
}
if ( rec == limit )
{
/* check that there is enough room for new functions */
if ( CUR.numFDefs >= CUR.maxFDefs )
{
CUR.error = TT_Err_Too_Many_Function_Defs;
return;
}
CUR.numFDefs++;
}
/* Although FDEF takes unsigned 32-bit integer, */
/* func # must be within unsigned 16-bit integer */
if ( n > 0xFFFFU )
{
CUR.error = TT_Err_Too_Many_Function_Defs;
return;
}
rec->range = CUR.curRange;
rec->opc = (FT_UInt16)n;
rec->start = CUR.IP + 1;
rec->active = TRUE;
rec->inline_delta = FALSE;
if ( n > CUR.maxFunc )
CUR.maxFunc = (FT_UInt16)n;
/* Now skip the whole function definition. */
/* We don't allow nested IDEFS & FDEFs. */
while ( SKIP_Code() == SUCCESS )
{
switch ( CUR.opcode )
{
/* IDEF */
case 0x89:
/* FDEF */
case 0x2C:
CUR.error = TT_Err_Nested_DEFS;
return;
/* ENDF */
case 0x2D:
rec->end = CUR.IP;
return;
}
}
}
/*************************************************************************/
/* */
/* ENDF[]: END Function definition */
/* Opcode range: 0x2D */
/* Stack: --> */
/* */
static void
Ins_ENDF( INS_ARG )
{
TT_CallRec* pRec;
FT_UNUSED_ARG;
/* We encountered an ENDF without a call */
if ( CUR.callTop <= 0 )
{
CUR.error = TT_Err_ENDF_In_Exec_Stream;
return;
}
CUR.callTop--;
pRec = &CUR.callStack[CUR.callTop];
pRec->Cur_Count--;
CUR.step_ins = FALSE;
if ( pRec->Cur_Count > 0 )
{
CUR.callTop++;
CUR.IP = pRec->Cur_Restart;
}
else
/* Loop through the current function */
INS_Goto_CodeRange( pRec->Caller_Range,
pRec->Caller_IP );
/* Exit the current call frame. */
/* NOTE: If the last instruction of a program is a */
/* CALL or LOOPCALL, the return address is */
/* always out of the code range. This is a */
/* valid address, and it is why we do not test */
/* the result of Ins_Goto_CodeRange() here! */
}
/*************************************************************************/
/* */
/* CALL[]: CALL function */
/* Opcode range: 0x2B */
/* Stack: uint32? --> */
/* */
static void
Ins_CALL( INS_ARG )
{
FT_ULong F;
TT_CallRec* pCrec;
TT_DefRecord* def;
/* first of all, check the index */
F = args[0];
if ( BOUNDSL( F, CUR.maxFunc + 1 ) )
goto Fail;
/* Except for some old Apple fonts, all functions in a TrueType */
/* font are defined in increasing order, starting from 0. This */
/* means that we normally have */
/* */
/* CUR.maxFunc+1 == CUR.numFDefs */
/* CUR.FDefs[n].opc == n for n in 0..CUR.maxFunc */
/* */
/* If this isn't true, we need to look up the function table. */
def = CUR.FDefs + F;
if ( CUR.maxFunc + 1 != CUR.numFDefs || def->opc != F )
{
/* look up the FDefs table */
TT_DefRecord* limit;
def = CUR.FDefs;
limit = def + CUR.numFDefs;
while ( def < limit && def->opc != F )
def++;
if ( def == limit )
goto Fail;
}
/* check that the function is active */
if ( !def->active )
goto Fail;
/* check the call stack */
if ( CUR.callTop >= CUR.callSize )
{
CUR.error = TT_Err_Stack_Overflow;
return;
}
pCrec = CUR.callStack + CUR.callTop;
pCrec->Caller_Range = CUR.curRange;
pCrec->Caller_IP = CUR.IP + 1;
pCrec->Cur_Count = 1;
pCrec->Cur_Restart = def->start;
pCrec->Cur_End = def->end;
CUR.callTop++;
INS_Goto_CodeRange( def->range,
def->start );
CUR.step_ins = FALSE;
return;
Fail:
CUR.error = TT_Err_Invalid_Reference;
}
/*************************************************************************/
/* */
/* LOOPCALL[]: LOOP and CALL function */
/* Opcode range: 0x2A */
/* Stack: uint32? Eint16? --> */
/* */
static void
Ins_LOOPCALL( INS_ARG )
{
FT_ULong F;
TT_CallRec* pCrec;
TT_DefRecord* def;
/* first of all, check the index */
F = args[1];
if ( BOUNDSL( F, CUR.maxFunc + 1 ) )
goto Fail;
/* Except for some old Apple fonts, all functions in a TrueType */
/* font are defined in increasing order, starting from 0. This */
/* means that we normally have */
/* */
/* CUR.maxFunc+1 == CUR.numFDefs */
/* CUR.FDefs[n].opc == n for n in 0..CUR.maxFunc */
/* */
/* If this isn't true, we need to look up the function table. */
def = CUR.FDefs + F;
if ( CUR.maxFunc + 1 != CUR.numFDefs || def->opc != F )
{
/* look up the FDefs table */
TT_DefRecord* limit;
def = CUR.FDefs;
limit = def + CUR.numFDefs;
while ( def < limit && def->opc != F )
def++;
if ( def == limit )
goto Fail;
}
/* check that the function is active */
if ( !def->active )
goto Fail;
/* check stack */
if ( CUR.callTop >= CUR.callSize )
{
CUR.error = TT_Err_Stack_Overflow;
return;
}
if ( args[0] > 0 )
{
pCrec = CUR.callStack + CUR.callTop;
pCrec->Caller_Range = CUR.curRange;
pCrec->Caller_IP = CUR.IP + 1;
pCrec->Cur_Count = (FT_Int)args[0];
pCrec->Cur_Restart = def->start;
pCrec->Cur_End = def->end;
CUR.callTop++;
INS_Goto_CodeRange( def->range, def->start );
CUR.step_ins = FALSE;
}
return;
Fail:
CUR.error = TT_Err_Invalid_Reference;
}
/*************************************************************************/
/* */
/* IDEF[]: Instruction DEFinition */
/* Opcode range: 0x89 */
/* Stack: Eint8 --> */
/* */
static void
Ins_IDEF( INS_ARG )
{
TT_DefRecord* def;
TT_DefRecord* limit;
/* First of all, look for the same function in our table */
def = CUR.IDefs;
limit = def + CUR.numIDefs;
for ( ; def < limit; def++ )
if ( def->opc == (FT_ULong)args[0] )
break;
if ( def == limit )
{
/* check that there is enough room for a new instruction */
if ( CUR.numIDefs >= CUR.maxIDefs )
{
CUR.error = TT_Err_Too_Many_Instruction_Defs;
return;
}
CUR.numIDefs++;
}
/* opcode must be unsigned 8-bit integer */
if ( 0 > args[0] || args[0] > 0x00FF )
{
CUR.error = TT_Err_Too_Many_Instruction_Defs;
return;
}
def->opc = (FT_Byte)args[0];
def->start = CUR.IP + 1;
def->range = CUR.curRange;
def->active = TRUE;
if ( (FT_ULong)args[0] > CUR.maxIns )
CUR.maxIns = (FT_Byte)args[0];
/* Now skip the whole function definition. */
/* We don't allow nested IDEFs & FDEFs. */
while ( SKIP_Code() == SUCCESS )
{
switch ( CUR.opcode )
{
/* IDEF */
case 0x89:
/* FDEF */
case 0x2C:
CUR.error = TT_Err_Nested_DEFS;
return;
/* ENDF */
case 0x2D:
return;
}
}
}
/*************************************************************************/
/* */
/* PUSHING DATA ONTO THE INTERPRETER STACK */
/* */
/* Instructions appear in the specification's order. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* NPUSHB[]: PUSH N Bytes */
/* Opcode range: 0x40 */
/* Stack: --> uint32... */
/* */
static void
Ins_NPUSHB( INS_ARG )
{
FT_UShort L, K;
L = (FT_UShort)CUR.code[CUR.IP + 1];
if ( BOUNDS( L, CUR.stackSize + 1 - CUR.top ) )
{
CUR.error = TT_Err_Stack_Overflow;
return;
}
for ( K = 1; K <= L; K++ )
args[K - 1] = CUR.code[CUR.IP + K + 1];
CUR.new_top += L;
}
/*************************************************************************/
/* */
/* NPUSHW[]: PUSH N Words */
/* Opcode range: 0x41 */
/* Stack: --> int32... */
/* */
static void
Ins_NPUSHW( INS_ARG )
{
FT_UShort L, K;
L = (FT_UShort)CUR.code[CUR.IP + 1];
if ( BOUNDS( L, CUR.stackSize + 1 - CUR.top ) )
{
CUR.error = TT_Err_Stack_Overflow;
return;
}
CUR.IP += 2;
for ( K = 0; K < L; K++ )
args[K] = GET_ShortIns();
CUR.step_ins = FALSE;
CUR.new_top += L;
}
/*************************************************************************/
/* */
/* PUSHB[abc]: PUSH Bytes */
/* Opcode range: 0xB0-0xB7 */
/* Stack: --> uint32... */
/* */
static void
Ins_PUSHB( INS_ARG )
{
FT_UShort L, K;
L = (FT_UShort)( CUR.opcode - 0xB0 + 1 );
if ( BOUNDS( L, CUR.stackSize + 1 - CUR.top ) )
{
CUR.error = TT_Err_Stack_Overflow;
return;
}
for ( K = 1; K <= L; K++ )
args[K - 1] = CUR.code[CUR.IP + K];
}
/*************************************************************************/
/* */
/* PUSHW[abc]: PUSH Words */
/* Opcode range: 0xB8-0xBF */
/* Stack: --> int32... */
/* */
static void
Ins_PUSHW( INS_ARG )
{
FT_UShort L, K;
L = (FT_UShort)( CUR.opcode - 0xB8 + 1 );
if ( BOUNDS( L, CUR.stackSize + 1 - CUR.top ) )
{
CUR.error = TT_Err_Stack_Overflow;
return;
}
CUR.IP++;
for ( K = 0; K < L; K++ )
args[K] = GET_ShortIns();
CUR.step_ins = FALSE;
}
/*************************************************************************/
/* */
/* MANAGING THE GRAPHICS STATE */
/* */
/* Instructions appear in the specs' order. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* GC[a]: Get Coordinate projected onto */
/* Opcode range: 0x46-0x47 */
/* Stack: uint32 --> f26.6 */
/* */
/* XXX: UNDOCUMENTED: Measures from the original glyph must be taken */
/* along the dual projection vector! */
/* */
static void
Ins_GC( INS_ARG )
{
FT_ULong L;
FT_F26Dot6 R;
L = (FT_ULong)args[0];
if ( BOUNDSL( L, CUR.zp2.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
R = 0;
}
else
{
if ( CUR.opcode & 1 )
R = CUR_fast_dualproj( &CUR.zp2.org[L] );
else
R = CUR_fast_project( &CUR.zp2.cur[L] );
}
args[0] = R;
}
/*************************************************************************/
/* */
/* SCFS[]: Set Coordinate From Stack */
/* Opcode range: 0x48 */
/* Stack: f26.6 uint32 --> */
/* */
/* Formula: */
/* */
/* OA := OA + ( value - OA.p )/( f.p ) * f */
/* */
static void
Ins_SCFS( INS_ARG )
{
FT_Long K;
FT_UShort L;
L = (FT_UShort)args[0];
if ( BOUNDS( L, CUR.zp2.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
K = CUR_fast_project( &CUR.zp2.cur[L] );
CUR_Func_move( &CUR.zp2, L, args[1] - K );
/* UNDOCUMENTED! The MS rasterizer does that with */
/* twilight points (confirmed by Greg Hitchcock) */
if ( CUR.GS.gep2 == 0 )
CUR.zp2.org[L] = CUR.zp2.cur[L];
}
/*************************************************************************/
/* */
/* MD[a]: Measure Distance */
/* Opcode range: 0x49-0x4A */
/* Stack: uint32 uint32 --> f26.6 */
/* */
/* XXX: UNDOCUMENTED: Measure taken in the original glyph must be along */
/* the dual projection vector. */
/* */
/* XXX: UNDOCUMENTED: Flag attributes are inverted! */
/* 0 => measure distance in original outline */
/* 1 => measure distance in grid-fitted outline */
/* */
/* XXX: UNDOCUMENTED: `zp0 - zp1', and not `zp2 - zp1! */
/* */
static void
Ins_MD( INS_ARG )
{
FT_UShort K, L;
FT_F26Dot6 D;
K = (FT_UShort)args[1];
L = (FT_UShort)args[0];
if ( BOUNDS( L, CUR.zp0.n_points ) ||
BOUNDS( K, CUR.zp1.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
D = 0;
}
else
{
if ( CUR.opcode & 1 )
D = CUR_Func_project( CUR.zp0.cur + L, CUR.zp1.cur + K );
else
{
/* XXX: UNDOCUMENTED: twilight zone special case */
if ( CUR.GS.gep0 == 0 || CUR.GS.gep1 == 0 )
{
FT_Vector* vec1 = CUR.zp0.org + L;
FT_Vector* vec2 = CUR.zp1.org + K;
D = CUR_Func_dualproj( vec1, vec2 );
}
else
{
FT_Vector* vec1 = CUR.zp0.orus + L;
FT_Vector* vec2 = CUR.zp1.orus + K;
if ( CUR.metrics.x_scale == CUR.metrics.y_scale )
{
/* this should be faster */
D = CUR_Func_dualproj( vec1, vec2 );
D = FT_MulFix( D, CUR.metrics.x_scale );
}
else
{
FT_Vector vec;
vec.x = FT_MulFix( vec1->x - vec2->x, CUR.metrics.x_scale );
vec.y = FT_MulFix( vec1->y - vec2->y, CUR.metrics.y_scale );
D = CUR_fast_dualproj( &vec );
}
}
}
}
args[0] = D;
}
/*************************************************************************/
/* */
/* SDPVTL[a]: Set Dual PVector to Line */
/* Opcode range: 0x86-0x87 */
/* Stack: uint32 uint32 --> */
/* */
static void
Ins_SDPVTL( INS_ARG )
{
FT_Long A, B, C;
/* was FT_Int in pas type ERROR */
FT_UShort p1, p2;
FT_Int aOpc = CUR.opcode;
p1 = (FT_UShort)args[1];
p2 = (FT_UShort)args[0];
if ( BOUNDS( p2, CUR.zp1.n_points ) ||
BOUNDS( p1, CUR.zp2.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
{
FT_Vector* v1 = CUR.zp1.org + p2;
FT_Vector* v2 = CUR.zp2.org + p1;
A = v1->x - v2->x;
B = v1->y - v2->y;
/* If v1 == v2, SDPVTL behaves the same as */
/* SVTCA[X], respectively. */
/* */
/* Confirmed by Greg Hitchcock. */
if ( A == 0 && B == 0 )
{
A = 0x4000;
aOpc = 0;
}
}
if ( ( aOpc & 1 ) != 0 )
{
/* counter clockwise rotation */
C = B;
B = A;
A = -C;
}
NORMalize( A, B, &CUR.GS.dualVector );
{
FT_Vector* v1 = CUR.zp1.cur + p2;
FT_Vector* v2 = CUR.zp2.cur + p1;
A = v1->x - v2->x;
B = v1->y - v2->y;
}
if ( ( aOpc & 1 ) != 0 )
{
/* counter clockwise rotation */
C = B;
B = A;
A = -C;
}
NORMalize( A, B, &CUR.GS.projVector );
GUESS_VECTOR( freeVector );
COMPUTE_Funcs();
}
/*************************************************************************/
/* */
/* SZP0[]: Set Zone Pointer 0 */
/* Opcode range: 0x13 */
/* Stack: uint32 --> */
/* */
static void
Ins_SZP0( INS_ARG )
{
switch ( (FT_Int)args[0] )
{
case 0:
CUR.zp0 = CUR.twilight;
break;
case 1:
CUR.zp0 = CUR.pts;
break;
default:
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
CUR.GS.gep0 = (FT_UShort)args[0];
}
/*************************************************************************/
/* */
/* SZP1[]: Set Zone Pointer 1 */
/* Opcode range: 0x14 */
/* Stack: uint32 --> */
/* */
static void
Ins_SZP1( INS_ARG )
{
switch ( (FT_Int)args[0] )
{
case 0:
CUR.zp1 = CUR.twilight;
break;
case 1:
CUR.zp1 = CUR.pts;
break;
default:
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
CUR.GS.gep1 = (FT_UShort)args[0];
}
/*************************************************************************/
/* */
/* SZP2[]: Set Zone Pointer 2 */
/* Opcode range: 0x15 */
/* Stack: uint32 --> */
/* */
static void
Ins_SZP2( INS_ARG )
{
switch ( (FT_Int)args[0] )
{
case 0:
CUR.zp2 = CUR.twilight;
break;
case 1:
CUR.zp2 = CUR.pts;
break;
default:
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
CUR.GS.gep2 = (FT_UShort)args[0];
}
/*************************************************************************/
/* */
/* SZPS[]: Set Zone PointerS */
/* Opcode range: 0x16 */
/* Stack: uint32 --> */
/* */
static void
Ins_SZPS( INS_ARG )
{
switch ( (FT_Int)args[0] )
{
case 0:
CUR.zp0 = CUR.twilight;
break;
case 1:
CUR.zp0 = CUR.pts;
break;
default:
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
CUR.zp1 = CUR.zp0;
CUR.zp2 = CUR.zp0;
CUR.GS.gep0 = (FT_UShort)args[0];
CUR.GS.gep1 = (FT_UShort)args[0];
CUR.GS.gep2 = (FT_UShort)args[0];
}
/*************************************************************************/
/* */
/* INSTCTRL[]: INSTruction ConTRoL */
/* Opcode range: 0x8e */
/* Stack: int32 int32 --> */
/* */
static void
Ins_INSTCTRL( INS_ARG )
{
FT_Long K, L;
K = args[1];
L = args[0];
if ( K < 1 || K > 2 )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
if ( L != 0 )
L = K;
CUR.GS.instruct_control = FT_BOOL(
( (FT_Byte)CUR.GS.instruct_control & ~(FT_Byte)K ) | (FT_Byte)L );
}
/*************************************************************************/
/* */
/* SCANCTRL[]: SCAN ConTRoL */
/* Opcode range: 0x85 */
/* Stack: uint32? --> */
/* */
static void
Ins_SCANCTRL( INS_ARG )
{
FT_Int A;
/* Get Threshold */
A = (FT_Int)( args[0] & 0xFF );
if ( A == 0xFF )
{
CUR.GS.scan_control = TRUE;
return;
}
else if ( A == 0 )
{
CUR.GS.scan_control = FALSE;
return;
}
if ( ( args[0] & 0x100 ) != 0 && CUR.tt_metrics.ppem <= A )
CUR.GS.scan_control = TRUE;
if ( ( args[0] & 0x200 ) != 0 && CUR.tt_metrics.rotated )
CUR.GS.scan_control = TRUE;
if ( ( args[0] & 0x400 ) != 0 && CUR.tt_metrics.stretched )
CUR.GS.scan_control = TRUE;
if ( ( args[0] & 0x800 ) != 0 && CUR.tt_metrics.ppem > A )
CUR.GS.scan_control = FALSE;
if ( ( args[0] & 0x1000 ) != 0 && CUR.tt_metrics.rotated )
CUR.GS.scan_control = FALSE;
if ( ( args[0] & 0x2000 ) != 0 && CUR.tt_metrics.stretched )
CUR.GS.scan_control = FALSE;
}
/*************************************************************************/
/* */
/* SCANTYPE[]: SCAN TYPE */
/* Opcode range: 0x8D */
/* Stack: uint32? --> */
/* */
static void
Ins_SCANTYPE( INS_ARG )
{
if ( args[0] >= 0 )
CUR.GS.scan_type = (FT_Int)args[0];
}
/*************************************************************************/
/* */
/* MANAGING OUTLINES */
/* */
/* Instructions appear in the specification's order. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* FLIPPT[]: FLIP PoinT */
/* Opcode range: 0x80 */
/* Stack: uint32... --> */
/* */
static void
Ins_FLIPPT( INS_ARG )
{
FT_UShort point;
FT_UNUSED_ARG;
if ( CUR.top < CUR.GS.loop )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Too_Few_Arguments;
goto Fail;
}
while ( CUR.GS.loop > 0 )
{
CUR.args--;
point = (FT_UShort)CUR.stack[CUR.args];
if ( BOUNDS( point, CUR.pts.n_points ) )
{
if ( CUR.pedantic_hinting )
{
CUR.error = TT_Err_Invalid_Reference;
return;
}
}
else
CUR.pts.tags[point] ^= FT_CURVE_TAG_ON;
CUR.GS.loop--;
}
Fail:
CUR.GS.loop = 1;
CUR.new_top = CUR.args;
}
/*************************************************************************/
/* */
/* FLIPRGON[]: FLIP RanGe ON */
/* Opcode range: 0x81 */
/* Stack: uint32 uint32 --> */
/* */
static void
Ins_FLIPRGON( INS_ARG )
{
FT_UShort I, K, L;
K = (FT_UShort)args[1];
L = (FT_UShort)args[0];
if ( BOUNDS( K, CUR.pts.n_points ) ||
BOUNDS( L, CUR.pts.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
for ( I = L; I <= K; I++ )
CUR.pts.tags[I] |= FT_CURVE_TAG_ON;
}
/*************************************************************************/
/* */
/* FLIPRGOFF: FLIP RanGe OFF */
/* Opcode range: 0x82 */
/* Stack: uint32 uint32 --> */
/* */
static void
Ins_FLIPRGOFF( INS_ARG )
{
FT_UShort I, K, L;
K = (FT_UShort)args[1];
L = (FT_UShort)args[0];
if ( BOUNDS( K, CUR.pts.n_points ) ||
BOUNDS( L, CUR.pts.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
for ( I = L; I <= K; I++ )
CUR.pts.tags[I] &= ~FT_CURVE_TAG_ON;
}
static FT_Bool
Compute_Point_Displacement( EXEC_OP_ FT_F26Dot6* x,
FT_F26Dot6* y,
TT_GlyphZone zone,
FT_UShort* refp )
{
TT_GlyphZoneRec zp;
FT_UShort p;
FT_F26Dot6 d;
if ( CUR.opcode & 1 )
{
zp = CUR.zp0;
p = CUR.GS.rp1;
}
else
{
zp = CUR.zp1;
p = CUR.GS.rp2;
}
if ( BOUNDS( p, zp.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
*refp = 0;
return FAILURE;
}
*zone = zp;
*refp = p;
d = CUR_Func_project( zp.cur + p, zp.org + p );
{
*x = FT_MulDiv( d, (FT_Long)CUR.GS.freeVector.x, CUR.F_dot_P );
*y = FT_MulDiv( d, (FT_Long)CUR.GS.freeVector.y, CUR.F_dot_P );
}
return SUCCESS;
}
static void
Move_Zp2_Point( EXEC_OP_ FT_UShort point,
FT_F26Dot6 dx,
FT_F26Dot6 dy,
FT_Bool touch )
{
if ( CUR.GS.freeVector.x != 0 )
{
CUR.zp2.cur[point].x += dx;
if ( touch )
CUR.zp2.tags[point] |= FT_CURVE_TAG_TOUCH_X;
}
if ( CUR.GS.freeVector.y != 0 )
{
CUR.zp2.cur[point].y += dy;
if ( touch )
CUR.zp2.tags[point] |= FT_CURVE_TAG_TOUCH_Y;
}
}
/*************************************************************************/
/* */
/* SHP[a]: SHift Point by the last point */
/* Opcode range: 0x32-0x33 */
/* Stack: uint32... --> */
/* */
static void
Ins_SHP( INS_ARG )
{
TT_GlyphZoneRec zp;
FT_UShort refp;
FT_F26Dot6 dx,
dy;
FT_UShort point;
FT_UNUSED_ARG;
if ( CUR.top < CUR.GS.loop )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
goto Fail;
}
if ( COMPUTE_Point_Displacement( &dx, &dy, &zp, &refp ) )
return;
while ( CUR.GS.loop > 0 )
{
CUR.args--;
point = (FT_UShort)CUR.stack[CUR.args];
if ( BOUNDS( point, CUR.zp2.n_points ) )
{
if ( CUR.pedantic_hinting )
{
CUR.error = TT_Err_Invalid_Reference;
return;
}
}
else
MOVE_Zp2_Point( point, dx, dy, TRUE );
CUR.GS.loop--;
}
Fail:
CUR.GS.loop = 1;
CUR.new_top = CUR.args;
}
/*************************************************************************/
/* */
/* SHC[a]: SHift Contour */
/* Opcode range: 0x34-35 */
/* Stack: uint32 --> */
/* */
/* UNDOCUMENTED: According to Greg Hitchcock, there is one (virtual) */
/* contour in the twilight zone, namely contour number */
/* zero which includes all points of it. */
/* */
static void
Ins_SHC( INS_ARG )
{
TT_GlyphZoneRec zp;
FT_UShort refp;
FT_F26Dot6 dx, dy;
FT_Short contour, bounds;
FT_UShort start, limit, i;
contour = (FT_UShort)args[0];
bounds = ( CUR.GS.gep2 == 0 ) ? 1 : CUR.zp2.n_contours;
if ( BOUNDS( contour, bounds ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
if ( COMPUTE_Point_Displacement( &dx, &dy, &zp, &refp ) )
return;
if ( contour == 0 )
start = 0;
else
start = (FT_UShort)( CUR.zp2.contours[contour - 1] + 1 -
CUR.zp2.first_point );
/* we use the number of points if in the twilight zone */
if ( CUR.GS.gep2 == 0 )
limit = CUR.zp2.n_points;
else
limit = (FT_UShort)( CUR.zp2.contours[contour] -
CUR.zp2.first_point + 1 );
for ( i = start; i < limit; i++ )
{
if ( zp.cur != CUR.zp2.cur || refp != i )
MOVE_Zp2_Point( i, dx, dy, TRUE );
}
}
/*************************************************************************/
/* */
/* SHZ[a]: SHift Zone */
/* Opcode range: 0x36-37 */
/* Stack: uint32 --> */
/* */
static void
Ins_SHZ( INS_ARG )
{
TT_GlyphZoneRec zp;
FT_UShort refp;
FT_F26Dot6 dx,
dy;
FT_UShort limit, i;
if ( BOUNDS( args[0], 2 ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
if ( COMPUTE_Point_Displacement( &dx, &dy, &zp, &refp ) )
return;
/* XXX: UNDOCUMENTED! SHZ doesn't move the phantom points. */
/* Twilight zone has no real contours, so use `n_points'. */
/* Normal zone's `n_points' includes phantoms, so must */
/* use end of last contour. */
if ( CUR.GS.gep2 == 0 )
limit = (FT_UShort)CUR.zp2.n_points;
else if ( CUR.GS.gep2 == 1 && CUR.zp2.n_contours > 0 )
limit = (FT_UShort)( CUR.zp2.contours[CUR.zp2.n_contours - 1] + 1 );
else
limit = 0;
/* XXX: UNDOCUMENTED! SHZ doesn't touch the points */
for ( i = 0; i < limit; i++ )
{
if ( zp.cur != CUR.zp2.cur || refp != i )
MOVE_Zp2_Point( i, dx, dy, FALSE );
}
}
/*************************************************************************/
/* */
/* SHPIX[]: SHift points by a PIXel amount */
/* Opcode range: 0x38 */
/* Stack: f26.6 uint32... --> */
/* */
static void
Ins_SHPIX( INS_ARG )
{
FT_F26Dot6 dx, dy;
FT_UShort point;
if ( CUR.top < CUR.GS.loop + 1 )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
goto Fail;
}
{
dx = TT_MulFix14( (FT_UInt32)args[0], CUR.GS.freeVector.x );
dy = TT_MulFix14( (FT_UInt32)args[0], CUR.GS.freeVector.y );
}
while ( CUR.GS.loop > 0 )
{
CUR.args--;
point = (FT_UShort)CUR.stack[CUR.args];
if ( BOUNDS( point, CUR.zp2.n_points ) )
{
if ( CUR.pedantic_hinting )
{
CUR.error = TT_Err_Invalid_Reference;
return;
}
}
else
MOVE_Zp2_Point( point, dx, dy, TRUE );
CUR.GS.loop--;
}
Fail:
CUR.GS.loop = 1;
CUR.new_top = CUR.args;
}
/*************************************************************************/
/* */
/* MSIRP[a]: Move Stack Indirect Relative Position */
/* Opcode range: 0x3A-0x3B */
/* Stack: f26.6 uint32 --> */
/* */
static void
Ins_MSIRP( INS_ARG )
{
FT_UShort point;
FT_F26Dot6 distance;
point = (FT_UShort)args[0];
if ( BOUNDS( point, CUR.zp1.n_points ) ||
BOUNDS( CUR.GS.rp0, CUR.zp0.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
/* UNDOCUMENTED! The MS rasterizer does that with */
/* twilight points (confirmed by Greg Hitchcock) */
if ( CUR.GS.gep1 == 0 )
{
CUR.zp1.org[point] = CUR.zp0.org[CUR.GS.rp0];
CUR_Func_move_orig( &CUR.zp1, point, args[1] );
CUR.zp1.cur[point] = CUR.zp1.org[point];
}
distance = CUR_Func_project( CUR.zp1.cur + point,
CUR.zp0.cur + CUR.GS.rp0 );
CUR_Func_move( &CUR.zp1, point, args[1] - distance );
CUR.GS.rp1 = CUR.GS.rp0;
CUR.GS.rp2 = point;
if ( ( CUR.opcode & 1 ) != 0 )
CUR.GS.rp0 = point;
}
/*************************************************************************/
/* */
/* MDAP[a]: Move Direct Absolute Point */
/* Opcode range: 0x2E-0x2F */
/* Stack: uint32 --> */
/* */
static void
Ins_MDAP( INS_ARG )
{
FT_UShort point;
FT_F26Dot6 cur_dist;
FT_F26Dot6 distance;
point = (FT_UShort)args[0];
if ( BOUNDS( point, CUR.zp0.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
if ( ( CUR.opcode & 1 ) != 0 )
{
cur_dist = CUR_fast_project( &CUR.zp0.cur[point] );
distance = CUR_Func_round(
cur_dist,
CUR.tt_metrics.compensations[0] ) - cur_dist;
}
else
distance = 0;
CUR_Func_move( &CUR.zp0, point, distance );
CUR.GS.rp0 = point;
CUR.GS.rp1 = point;
}
/*************************************************************************/
/* */
/* MIAP[a]: Move Indirect Absolute Point */
/* Opcode range: 0x3E-0x3F */
/* Stack: uint32 uint32 --> */
/* */
static void
Ins_MIAP( INS_ARG )
{
FT_ULong cvtEntry;
FT_UShort point;
FT_F26Dot6 distance;
FT_F26Dot6 org_dist;
FT_F26Dot6 control_value_cutin;
control_value_cutin = CUR.GS.control_value_cutin;
cvtEntry = (FT_ULong)args[1];
point = (FT_UShort)args[0];
if ( BOUNDS( point, CUR.zp0.n_points ) ||
BOUNDSL( cvtEntry, CUR.cvtSize ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
goto Fail;
}
/* UNDOCUMENTED! */
/* */
/* The behaviour of an MIAP instruction is quite different when used */
/* in the twilight zone. */
/* */
/* First, no control value cut-in test is performed as it would fail */
/* anyway. Second, the original point, i.e. (org_x,org_y) of */
/* zp0.point, is set to the absolute, unrounded distance found in the */
/* CVT. */
/* */
/* This is used in the CVT programs of the Microsoft fonts Arial, */
/* Times, etc., in order to re-adjust some key font heights. It */
/* allows the use of the IP instruction in the twilight zone, which */
/* otherwise would be invalid according to the specification. */
/* */
/* We implement it with a special sequence for the twilight zone. */
/* This is a bad hack, but it seems to work. */
/* */
/* Confirmed by Greg Hitchcock. */
distance = CUR_Func_read_cvt( cvtEntry );
/* If in twilight zone */
if ( CUR.GS.gep0 == 0 )
{
CUR.zp0.org[point].x = TT_MulFix14( (FT_UInt32)distance,
CUR.GS.freeVector.x );
CUR.zp0.org[point].y = TT_MulFix14( (FT_UInt32)distance,
CUR.GS.freeVector.y ),
CUR.zp0.cur[point] = CUR.zp0.org[point];
}
org_dist = CUR_fast_project( &CUR.zp0.cur[point] );
/* rounding and control cut-in flag */
if ( ( CUR.opcode & 1 ) != 0 )
{
if ( FT_ABS( distance - org_dist ) > control_value_cutin )
distance = org_dist;
distance = CUR_Func_round( distance,
CUR.tt_metrics.compensations[0] );
}
CUR_Func_move( &CUR.zp0, point, distance - org_dist );
Fail:
CUR.GS.rp0 = point;
CUR.GS.rp1 = point;
}
/*************************************************************************/
/* */
/* MDRP[abcde]: Move Direct Relative Point */
/* Opcode range: 0xC0-0xDF */
/* Stack: uint32 --> */
/* */
static void
Ins_MDRP( INS_ARG )
{
FT_UShort point;
FT_F26Dot6 org_dist, distance, minimum_distance;
minimum_distance = CUR.GS.minimum_distance;
point = (FT_UShort)args[0];
if ( BOUNDS( point, CUR.zp1.n_points ) ||
BOUNDS( CUR.GS.rp0, CUR.zp0.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
goto Fail;
}
/* XXX: Is there some undocumented feature while in the */
/* twilight zone? */
/* XXX: UNDOCUMENTED: twilight zone special case */
if ( CUR.GS.gep0 == 0 || CUR.GS.gep1 == 0 )
{
FT_Vector* vec1 = &CUR.zp1.org[point];
FT_Vector* vec2 = &CUR.zp0.org[CUR.GS.rp0];
org_dist = CUR_Func_dualproj( vec1, vec2 );
}
else
{
FT_Vector* vec1 = &CUR.zp1.orus[point];
FT_Vector* vec2 = &CUR.zp0.orus[CUR.GS.rp0];
if ( CUR.metrics.x_scale == CUR.metrics.y_scale )
{
/* this should be faster */
org_dist = CUR_Func_dualproj( vec1, vec2 );
org_dist = FT_MulFix( org_dist, CUR.metrics.x_scale );
}
else
{
FT_Vector vec;
vec.x = FT_MulFix( vec1->x - vec2->x, CUR.metrics.x_scale );
vec.y = FT_MulFix( vec1->y - vec2->y, CUR.metrics.y_scale );
org_dist = CUR_fast_dualproj( &vec );
}
}
/* single width cut-in test */
if ( FT_ABS( org_dist - CUR.GS.single_width_value ) <
CUR.GS.single_width_cutin )
{
if ( org_dist >= 0 )
org_dist = CUR.GS.single_width_value;
else
org_dist = -CUR.GS.single_width_value;
}
/* round flag */
if ( ( CUR.opcode & 4 ) != 0 )
{
distance = CUR_Func_round(
org_dist,
CUR.tt_metrics.compensations[CUR.opcode & 3] );
}
else
distance = ROUND_None(
org_dist,
CUR.tt_metrics.compensations[CUR.opcode & 3] );
/* minimum distance flag */
if ( ( CUR.opcode & 8 ) != 0 )
{
if ( org_dist >= 0 )
{
if ( distance < minimum_distance )
distance = minimum_distance;
}
else
{
if ( distance > -minimum_distance )
distance = -minimum_distance;
}
}
/* now move the point */
org_dist = CUR_Func_project( CUR.zp1.cur + point,
CUR.zp0.cur + CUR.GS.rp0 );
CUR_Func_move( &CUR.zp1, point, distance - org_dist );
Fail:
CUR.GS.rp1 = CUR.GS.rp0;
CUR.GS.rp2 = point;
if ( ( CUR.opcode & 16 ) != 0 )
CUR.GS.rp0 = point;
}
/*************************************************************************/
/* */
/* MIRP[abcde]: Move Indirect Relative Point */
/* Opcode range: 0xE0-0xFF */
/* Stack: int32? uint32 --> */
/* */
static void
Ins_MIRP( INS_ARG )
{
FT_UShort point;
FT_ULong cvtEntry;
FT_F26Dot6 cvt_dist,
distance,
cur_dist,
org_dist,
control_value_cutin,
minimum_distance;
minimum_distance = CUR.GS.minimum_distance;
control_value_cutin = CUR.GS.control_value_cutin;
point = (FT_UShort)args[0];
cvtEntry = (FT_ULong)( args[1] + 1 );
/* XXX: UNDOCUMENTED! cvt[-1] = 0 always */
if ( BOUNDS( point, CUR.zp1.n_points ) ||
BOUNDSL( cvtEntry, CUR.cvtSize + 1 ) ||
BOUNDS( CUR.GS.rp0, CUR.zp0.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
goto Fail;
}
if ( !cvtEntry )
cvt_dist = 0;
else
cvt_dist = CUR_Func_read_cvt( cvtEntry - 1 );
/* single width test */
if ( FT_ABS( cvt_dist - CUR.GS.single_width_value ) <
CUR.GS.single_width_cutin )
{
if ( cvt_dist >= 0 )
cvt_dist = CUR.GS.single_width_value;
else
cvt_dist = -CUR.GS.single_width_value;
}
/* UNDOCUMENTED! The MS rasterizer does that with */
/* twilight points (confirmed by Greg Hitchcock) */
if ( CUR.GS.gep1 == 0 )
{
CUR.zp1.org[point].x = CUR.zp0.org[CUR.GS.rp0].x +
TT_MulFix14( (FT_UInt32)cvt_dist,
CUR.GS.freeVector.x );
CUR.zp1.org[point].y = CUR.zp0.org[CUR.GS.rp0].y +
TT_MulFix14( (FT_UInt32)cvt_dist,
CUR.GS.freeVector.y );
CUR.zp1.cur[point] = CUR.zp1.org[point];
}
org_dist = CUR_Func_dualproj( &CUR.zp1.org[point],
&CUR.zp0.org[CUR.GS.rp0] );
cur_dist = CUR_Func_project ( &CUR.zp1.cur[point],
&CUR.zp0.cur[CUR.GS.rp0] );
/* auto-flip test */
if ( CUR.GS.auto_flip )
{
if ( ( org_dist ^ cvt_dist ) < 0 )
cvt_dist = -cvt_dist;
}
/* control value cut-in and round */
if ( ( CUR.opcode & 4 ) != 0 )
{
/* XXX: UNDOCUMENTED! Only perform cut-in test when both points */
/* refer to the same zone. */
if ( CUR.GS.gep0 == CUR.GS.gep1 )
{
/* XXX: According to Greg Hitchcock, the following wording is */
/* the right one: */
/* */
/* When the absolute difference between the value in */
/* the table [CVT] and the measurement directly from */
/* the outline is _greater_ than the cut_in value, the */
/* outline measurement is used. */
/* */
/* This is from `instgly.doc'. The description in */
/* `ttinst2.doc', version 1.66, is thus incorrect since */
/* it implies `>=' instead of `>'. */
if ( FT_ABS( cvt_dist - org_dist ) > control_value_cutin )
cvt_dist = org_dist;
}
distance = CUR_Func_round(
cvt_dist,
CUR.tt_metrics.compensations[CUR.opcode & 3] );
}
else
distance = ROUND_None(
cvt_dist,
CUR.tt_metrics.compensations[CUR.opcode & 3] );
/* minimum distance test */
if ( ( CUR.opcode & 8 ) != 0 )
{
if ( org_dist >= 0 )
{
if ( distance < minimum_distance )
distance = minimum_distance;
}
else
{
if ( distance > -minimum_distance )
distance = -minimum_distance;
}
}
CUR_Func_move( &CUR.zp1, point, distance - cur_dist );
Fail:
CUR.GS.rp1 = CUR.GS.rp0;
if ( ( CUR.opcode & 16 ) != 0 )
CUR.GS.rp0 = point;
CUR.GS.rp2 = point;
}
/*************************************************************************/
/* */
/* ALIGNRP[]: ALIGN Relative Point */
/* Opcode range: 0x3C */
/* Stack: uint32 uint32... --> */
/* */
static void
Ins_ALIGNRP( INS_ARG )
{
FT_UShort point;
FT_F26Dot6 distance;
FT_UNUSED_ARG;
if ( CUR.top < CUR.GS.loop ||
BOUNDS( CUR.GS.rp0, CUR.zp0.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
goto Fail;
}
while ( CUR.GS.loop > 0 )
{
CUR.args--;
point = (FT_UShort)CUR.stack[CUR.args];
if ( BOUNDS( point, CUR.zp1.n_points ) )
{
if ( CUR.pedantic_hinting )
{
CUR.error = TT_Err_Invalid_Reference;
return;
}
}
else
{
distance = CUR_Func_project( CUR.zp1.cur + point,
CUR.zp0.cur + CUR.GS.rp0 );
CUR_Func_move( &CUR.zp1, point, -distance );
}
CUR.GS.loop--;
}
Fail:
CUR.GS.loop = 1;
CUR.new_top = CUR.args;
}
/*************************************************************************/
/* */
/* ISECT[]: moves point to InterSECTion */
/* Opcode range: 0x0F */
/* Stack: 5 * uint32 --> */
/* */
static void
Ins_ISECT( INS_ARG )
{
FT_UShort point,
a0, a1,
b0, b1;
FT_F26Dot6 discriminant, dotproduct;
FT_F26Dot6 dx, dy,
dax, day,
dbx, dby;
FT_F26Dot6 val;
FT_Vector R;
point = (FT_UShort)args[0];
a0 = (FT_UShort)args[1];
a1 = (FT_UShort)args[2];
b0 = (FT_UShort)args[3];
b1 = (FT_UShort)args[4];
if ( BOUNDS( b0, CUR.zp0.n_points ) ||
BOUNDS( b1, CUR.zp0.n_points ) ||
BOUNDS( a0, CUR.zp1.n_points ) ||
BOUNDS( a1, CUR.zp1.n_points ) ||
BOUNDS( point, CUR.zp2.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
/* Cramer's rule */
dbx = CUR.zp0.cur[b1].x - CUR.zp0.cur[b0].x;
dby = CUR.zp0.cur[b1].y - CUR.zp0.cur[b0].y;
dax = CUR.zp1.cur[a1].x - CUR.zp1.cur[a0].x;
day = CUR.zp1.cur[a1].y - CUR.zp1.cur[a0].y;
dx = CUR.zp0.cur[b0].x - CUR.zp1.cur[a0].x;
dy = CUR.zp0.cur[b0].y - CUR.zp1.cur[a0].y;
CUR.zp2.tags[point] |= FT_CURVE_TAG_TOUCH_BOTH;
discriminant = FT_MulDiv( dax, -dby, 0x40 ) +
FT_MulDiv( day, dbx, 0x40 );
dotproduct = FT_MulDiv( dax, dbx, 0x40 ) +
FT_MulDiv( day, dby, 0x40 );
/* The discriminant above is actually a cross product of vectors */
/* da and db. Together with the dot product, they can be used as */
/* surrogates for sine and cosine of the angle between the vectors. */
/* Indeed, */
/* dotproduct = |da||db|cos(angle) */
/* discriminant = |da||db|sin(angle) . */
/* We use these equations to reject grazing intersections by */
/* thresholding abs(tan(angle)) at 1/19, corresponding to 3 degrees. */
if ( 19 * FT_ABS( discriminant ) > FT_ABS( dotproduct ) )
{
val = FT_MulDiv( dx, -dby, 0x40 ) + FT_MulDiv( dy, dbx, 0x40 );
R.x = FT_MulDiv( val, dax, discriminant );
R.y = FT_MulDiv( val, day, discriminant );
CUR.zp2.cur[point].x = CUR.zp1.cur[a0].x + R.x;
CUR.zp2.cur[point].y = CUR.zp1.cur[a0].y + R.y;
}
else
{
/* else, take the middle of the middles of A and B */
CUR.zp2.cur[point].x = ( CUR.zp1.cur[a0].x +
CUR.zp1.cur[a1].x +
CUR.zp0.cur[b0].x +
CUR.zp0.cur[b1].x ) / 4;
CUR.zp2.cur[point].y = ( CUR.zp1.cur[a0].y +
CUR.zp1.cur[a1].y +
CUR.zp0.cur[b0].y +
CUR.zp0.cur[b1].y ) / 4;
}
}
/*************************************************************************/
/* */
/* ALIGNPTS[]: ALIGN PoinTS */
/* Opcode range: 0x27 */
/* Stack: uint32 uint32 --> */
/* */
static void
Ins_ALIGNPTS( INS_ARG )
{
FT_UShort p1, p2;
FT_F26Dot6 distance;
p1 = (FT_UShort)args[0];
p2 = (FT_UShort)args[1];
if ( BOUNDS( p1, CUR.zp1.n_points ) ||
BOUNDS( p2, CUR.zp0.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
distance = CUR_Func_project( CUR.zp0.cur + p2,
CUR.zp1.cur + p1 ) / 2;
CUR_Func_move( &CUR.zp1, p1, distance );
CUR_Func_move( &CUR.zp0, p2, -distance );
}
/*************************************************************************/
/* */
/* IP[]: Interpolate Point */
/* Opcode range: 0x39 */
/* Stack: uint32... --> */
/* */
/* SOMETIMES, DUMBER CODE IS BETTER CODE */
static void
Ins_IP( INS_ARG )
{
FT_F26Dot6 old_range, cur_range;
FT_Vector* orus_base;
FT_Vector* cur_base;
FT_Int twilight;
FT_UNUSED_ARG;
if ( CUR.top < CUR.GS.loop )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
goto Fail;
}
/*
* We need to deal in a special way with the twilight zone.
* Otherwise, by definition, the value of CUR.twilight.orus[n] is (0,0),
* for every n.
*/
twilight = CUR.GS.gep0 == 0 || CUR.GS.gep1 == 0 || CUR.GS.gep2 == 0;
if ( BOUNDS( CUR.GS.rp1, CUR.zp0.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
goto Fail;
}
if ( twilight )
orus_base = &CUR.zp0.org[CUR.GS.rp1];
else
orus_base = &CUR.zp0.orus[CUR.GS.rp1];
cur_base = &CUR.zp0.cur[CUR.GS.rp1];
/* XXX: There are some glyphs in some braindead but popular */
/* fonts out there (e.g. [aeu]grave in monotype.ttf) */
/* calling IP[] with bad values of rp[12]. */
/* Do something sane when this odd thing happens. */
if ( BOUNDS( CUR.GS.rp1, CUR.zp0.n_points ) ||
BOUNDS( CUR.GS.rp2, CUR.zp1.n_points ) )
{
old_range = 0;
cur_range = 0;
}
else
{
if ( twilight )
old_range = CUR_Func_dualproj( &CUR.zp1.org[CUR.GS.rp2],
orus_base );
else if ( CUR.metrics.x_scale == CUR.metrics.y_scale )
old_range = CUR_Func_dualproj( &CUR.zp1.orus[CUR.GS.rp2],
orus_base );
else
{
FT_Vector vec;
vec.x = FT_MulFix( CUR.zp1.orus[CUR.GS.rp2].x - orus_base->x,
CUR.metrics.x_scale );
vec.y = FT_MulFix( CUR.zp1.orus[CUR.GS.rp2].y - orus_base->y,
CUR.metrics.y_scale );
old_range = CUR_fast_dualproj( &vec );
}
cur_range = CUR_Func_project ( &CUR.zp1.cur[CUR.GS.rp2], cur_base );
}
for ( ; CUR.GS.loop > 0; --CUR.GS.loop )
{
FT_UInt point = (FT_UInt)CUR.stack[--CUR.args];
FT_F26Dot6 org_dist, cur_dist, new_dist;
/* check point bounds */
if ( BOUNDS( point, CUR.zp2.n_points ) )
{
if ( CUR.pedantic_hinting )
{
CUR.error = TT_Err_Invalid_Reference;
return;
}
continue;
}
if ( twilight )
org_dist = CUR_Func_dualproj( &CUR.zp2.org[point], orus_base );
else if ( CUR.metrics.x_scale == CUR.metrics.y_scale )
org_dist = CUR_Func_dualproj( &CUR.zp2.orus[point], orus_base );
else
{
FT_Vector vec;
vec.x = FT_MulFix( CUR.zp2.orus[point].x - orus_base->x,
CUR.metrics.x_scale );
vec.y = FT_MulFix( CUR.zp2.orus[point].y - orus_base->y,
CUR.metrics.y_scale );
org_dist = CUR_fast_dualproj( &vec );
}
cur_dist = CUR_Func_project ( &CUR.zp2.cur[point], cur_base );
if ( org_dist )
new_dist = ( old_range != 0 )
? FT_MulDiv( org_dist, cur_range, old_range )
: cur_dist;
else
new_dist = 0;
CUR_Func_move( &CUR.zp2, (FT_UShort)point, new_dist - cur_dist );
}
Fail:
CUR.GS.loop = 1;
CUR.new_top = CUR.args;
}
/*************************************************************************/
/* */
/* UTP[a]: UnTouch Point */
/* Opcode range: 0x29 */
/* Stack: uint32 --> */
/* */
static void
Ins_UTP( INS_ARG )
{
FT_UShort point;
FT_Byte mask;
point = (FT_UShort)args[0];
if ( BOUNDS( point, CUR.zp0.n_points ) )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
return;
}
mask = 0xFF;
if ( CUR.GS.freeVector.x != 0 )
mask &= ~FT_CURVE_TAG_TOUCH_X;
if ( CUR.GS.freeVector.y != 0 )
mask &= ~FT_CURVE_TAG_TOUCH_Y;
CUR.zp0.tags[point] &= mask;
}
/* Local variables for Ins_IUP: */
typedef struct IUP_WorkerRec_
{
/* original and current coordinate */
FT_Vector* orgs;
/* arrays */
FT_Vector* curs;
FT_Vector* orus;
FT_UInt max_points;
} IUP_WorkerRec, *IUP_Worker;
static void
_iup_worker_shift( IUP_Worker worker,
FT_UInt p1,
FT_UInt p2,
FT_UInt p )
{
FT_UInt i;
FT_F26Dot6 dx;
dx = worker->curs[p].x - worker->orgs[p].x;
if ( dx != 0 )
{
for ( i = p1; i < p; i++ )
worker->curs[i].x += dx;
for ( i = p + 1; i <= p2; i++ )
worker->curs[i].x += dx;
}
}
static void
_iup_worker_interpolate( IUP_Worker worker,
FT_UInt p1,
FT_UInt p2,
FT_UInt ref1,
FT_UInt ref2 )
{
FT_UInt i;
FT_F26Dot6 orus1, orus2, org1, org2, delta1, delta2;
if ( p1 > p2 )
return;
if ( BOUNDS( ref1, worker->max_points ) ||
BOUNDS( ref2, worker->max_points ) )
return;
orus1 = worker->orus[ref1].x;
orus2 = worker->orus[ref2].x;
if ( orus1 > orus2 )
{
FT_F26Dot6 tmp_o;
FT_UInt tmp_r;
tmp_o = orus1;
orus1 = orus2;
orus2 = tmp_o;
tmp_r = ref1;
ref1 = ref2;
ref2 = tmp_r;
}
org1 = worker->orgs[ref1].x;
org2 = worker->orgs[ref2].x;
delta1 = worker->curs[ref1].x - org1;
delta2 = worker->curs[ref2].x - org2;
if ( orus1 == orus2 )
{
/* simple shift of untouched points */
for ( i = p1; i <= p2; i++ )
{
FT_F26Dot6 x = worker->orgs[i].x;
if ( x <= org1 )
x += delta1;
else
x += delta2;
worker->curs[i].x = x;
}
}
else
{
FT_Fixed scale = 0;
FT_Bool scale_valid = 0;
/* interpolation */
for ( i = p1; i <= p2; i++ )
{
FT_F26Dot6 x = worker->orgs[i].x;
if ( x <= org1 )
x += delta1;
else if ( x >= org2 )
x += delta2;
else
{
if ( !scale_valid )
{
scale_valid = 1;
scale = FT_DivFix( org2 + delta2 - ( org1 + delta1 ),
orus2 - orus1 );
}
x = ( org1 + delta1 ) +
FT_MulFix( worker->orus[i].x - orus1, scale );
}
worker->curs[i].x = x;
}
}
}
/*************************************************************************/
/* */
/* IUP[a]: Interpolate Untouched Points */
/* Opcode range: 0x30-0x31 */
/* Stack: --> */
/* */
static void
Ins_IUP( INS_ARG )
{
IUP_WorkerRec V;
FT_Byte mask;
/* first point of contour */
FT_UInt first_point;
/* end point (last+1) of contour */
FT_UInt end_point;
/* first touched point in contour */
FT_UInt first_touched;
/* current touched point in contour */
FT_UInt cur_touched;
/* current point */
FT_UInt point;
/* current contour */
FT_Short contour;
FT_UNUSED_ARG;
/* ignore empty outlines */
if ( CUR.pts.n_contours == 0 )
return;
if ( CUR.opcode & 1 )
{
mask = FT_CURVE_TAG_TOUCH_X;
V.orgs = CUR.pts.org;
V.curs = CUR.pts.cur;
V.orus = CUR.pts.orus;
}
else
{
mask = FT_CURVE_TAG_TOUCH_Y;
V.orgs = (FT_Vector*)( (FT_Pos*)CUR.pts.org + 1 );
V.curs = (FT_Vector*)( (FT_Pos*)CUR.pts.cur + 1 );
V.orus = (FT_Vector*)( (FT_Pos*)CUR.pts.orus + 1 );
}
V.max_points = CUR.pts.n_points;
contour = 0;
point = 0;
do
{
end_point = CUR.pts.contours[contour] - CUR.pts.first_point;
first_point = point;
if ( BOUNDS ( end_point, CUR.pts.n_points ) )
end_point = CUR.pts.n_points - 1;
while ( point <= end_point && ( CUR.pts.tags[point] & mask ) == 0 )
point++;
if ( point <= end_point )
{
first_touched = point;
cur_touched = point;
point++;
while ( point <= end_point )
{
if ( ( CUR.pts.tags[point] & mask ) != 0 )
{
_iup_worker_interpolate( &V,
cur_touched + 1,
point - 1,
cur_touched,
point );
cur_touched = point;
}
point++;
}
if ( cur_touched == first_touched )
_iup_worker_shift( &V, first_point, end_point, cur_touched );
else
{
_iup_worker_interpolate( &V,
(FT_UShort)( cur_touched + 1 ),
end_point,
cur_touched,
first_touched );
if ( first_touched > 0 )
_iup_worker_interpolate( &V,
first_point,
first_touched - 1,
cur_touched,
first_touched );
}
}
contour++;
} while ( contour < CUR.pts.n_contours );
}
/*************************************************************************/
/* */
/* DELTAPn[]: DELTA exceptions P1, P2, P3 */
/* Opcode range: 0x5D,0x71,0x72 */
/* Stack: uint32 (2 * uint32)... --> */
/* */
static void
Ins_DELTAP( INS_ARG )
{
FT_ULong k, nump;
FT_UShort A;
FT_ULong C;
FT_Long B;
/* some points theoretically may occur more
than once, thus UShort isn't enough */
nump = (FT_ULong)args[0];
for ( k = 1; k <= nump; k++ )
{
if ( CUR.args < 2 )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Too_Few_Arguments;
CUR.args = 0;
goto Fail;
}
CUR.args -= 2;
A = (FT_UShort)CUR.stack[CUR.args + 1];
B = CUR.stack[CUR.args];
/* XXX: Because some popular fonts contain some invalid DeltaP */
/* instructions, we simply ignore them when the stacked */
/* point reference is off limit, rather than returning an */
/* error. As a delta instruction doesn't change a glyph */
/* in great ways, this shouldn't be a problem. */
if ( !BOUNDS( A, CUR.zp0.n_points ) )
{
C = ( (FT_ULong)B & 0xF0 ) >> 4;
switch ( CUR.opcode )
{
case 0x5D:
break;
case 0x71:
C += 16;
break;
case 0x72:
C += 32;
break;
}
C += CUR.GS.delta_base;
if ( CURRENT_Ppem() == (FT_Long)C )
{
B = ( (FT_ULong)B & 0xF ) - 8;
if ( B >= 0 )
B++;
B = B * 64 / ( 1L << CUR.GS.delta_shift );
CUR_Func_move( &CUR.zp0, A, B );
}
}
else
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Invalid_Reference;
}
Fail:
CUR.new_top = CUR.args;
}
/*************************************************************************/
/* */
/* DELTACn[]: DELTA exceptions C1, C2, C3 */
/* Opcode range: 0x73,0x74,0x75 */
/* Stack: uint32 (2 * uint32)... --> */
/* */
static void
Ins_DELTAC( INS_ARG )
{
FT_ULong nump, k;
FT_ULong A, C;
FT_Long B;
nump = (FT_ULong)args[0];
for ( k = 1; k <= nump; k++ )
{
if ( CUR.args < 2 )
{
if ( CUR.pedantic_hinting )
CUR.error = TT_Err_Too_Few_Arguments;
CUR.args = 0;
goto Fail;
}
CUR.args -= 2;
A = (FT_ULong)CUR.stack[CUR.args + 1];
B = CUR.stack[CUR.args];
if ( BOUNDSL( A, CUR.cvtSize ) )
{
if ( CUR.pedantic_hinting )
{
CUR.error = TT_Err_Invalid_Reference;
return;
}
}
else
{
C = ( (FT_ULong)B & 0xF0 ) >> 4;
switch ( CUR.opcode )
{
case 0x73:
break;
case 0x74:
C += 16;
break;
case 0x75:
C += 32;
break;
}
C += CUR.GS.delta_base;
if ( CURRENT_Ppem() == (FT_Long)C )
{
B = ( (FT_ULong)B & 0xF ) - 8;
if ( B >= 0 )
B++;
B = B * 64 / ( 1L << CUR.GS.delta_shift );
CUR_Func_move_cvt( A, B );
}
}
}
Fail:
CUR.new_top = CUR.args;
}
/*************************************************************************/
/* */
/* MISC. INSTRUCTIONS */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* GETINFO[]: GET INFOrmation */
/* Opcode range: 0x88 */
/* Stack: uint32 --> uint32 */
/* */
static void
Ins_GETINFO( INS_ARG )
{
FT_Long K;
K = 0;
if ( ( args[0] & 1 ) != 0 )
K = 35;
/********************************/
/* GLYPH ROTATED */
/* Selector Bit: 1 */
/* Return Bit(s): 8 */
/* */
if ( ( args[0] & 2 ) != 0 && CUR.tt_metrics.rotated )
K |= 0x80;
/********************************/
/* GLYPH STRETCHED */
/* Selector Bit: 2 */
/* Return Bit(s): 9 */
/* */
if ( ( args[0] & 4 ) != 0 && CUR.tt_metrics.stretched )
K |= 1 << 8;
/********************************/
/* HINTING FOR GRAYSCALE */
/* Selector Bit: 5 */
/* Return Bit(s): 12 */
/* */
if ( ( args[0] & 32 ) != 0 && CUR.grayscale )
K |= 1 << 12;
args[0] = K;
}
static void
Ins_UNKNOWN( INS_ARG )
{
TT_DefRecord* def = CUR.IDefs;
TT_DefRecord* limit = def + CUR.numIDefs;
FT_UNUSED_ARG;
for ( ; def < limit; def++ )
{
if ( (FT_Byte)def->opc == CUR.opcode && def->active )
{
TT_CallRec* call;
if ( CUR.callTop >= CUR.callSize )
{
CUR.error = TT_Err_Stack_Overflow;
return;
}
call = CUR.callStack + CUR.callTop++;
call->Caller_Range = CUR.curRange;
call->Caller_IP = CUR.IP + 1;
call->Cur_Count = 1;
call->Cur_Restart = def->start;
call->Cur_End = def->end;
INS_Goto_CodeRange( def->range, def->start );
CUR.step_ins = FALSE;
return;
}
}
CUR.error = TT_Err_Invalid_Opcode;
}
/*************************************************************************/
/* */
/* RUN */
/* */
/* This function executes a run of opcodes. It will exit in the */
/* following cases: */
/* */
/* - Errors (in which case it returns FALSE). */
/* */
/* - Reaching the end of the main code range (returns TRUE). */
/* Reaching the end of a code range within a function call is an */
/* error. */
/* */
/* - After executing one single opcode, if the flag `Instruction_Trap' */
/* is set to TRUE (returns TRUE). */
/* */
/* On exit with TRUE, test IP < CodeSize to know whether it comes from */
/* an instruction trap or a normal termination. */
/* */
/* */
/* Note: The documented DEBUG opcode pops a value from the stack. This */
/* behaviour is unsupported; here a DEBUG opcode is always an */
/* error. */
/* */
/* */
/* THIS IS THE INTERPRETER'S MAIN LOOP. */
/* */
/* Instructions appear in the specification's order. */
/* */
/*************************************************************************/
/* documentation is in ttinterp.h */
FT_EXPORT_DEF( FT_Error )
TT_RunIns( TT_ExecContext exc )
{
/* executed instructions counter */
FT_Long ins_counter = 0;
#ifdef TT_CONFIG_OPTION_STATIC_RASTER
cur = *exc;
#endif
/* set CVT functions */
CUR.tt_metrics.ratio = 0;
if ( CUR.metrics.x_ppem != CUR.metrics.y_ppem )
{
/* non-square pixels, use the stretched routines */
CUR.func_read_cvt = Read_CVT_Stretched;
CUR.func_write_cvt = Write_CVT_Stretched;
CUR.func_move_cvt = Move_CVT_Stretched;
}
else
{
/* square pixels, use normal routines */
CUR.func_read_cvt = Read_CVT;
CUR.func_write_cvt = Write_CVT;
CUR.func_move_cvt = Move_CVT;
}
COMPUTE_Funcs();
COMPUTE_Round( (FT_Byte)exc->GS.round_state );
do
{
CUR.opcode = CUR.code[CUR.IP];
FT_TRACE7(( " " ));
FT_TRACE7(( opcode_name[CUR.opcode] ));
FT_TRACE7(( "\n" ));
if ( ( CUR.length = opcode_length[CUR.opcode] ) < 0 )
{
if ( CUR.IP + 1 >= CUR.codeSize )
goto LErrorCodeOverflow_;
CUR.length = 2 - CUR.length * CUR.code[CUR.IP + 1];
}
if ( CUR.IP + CUR.length > CUR.codeSize )
goto LErrorCodeOverflow_;
/* First, let's check for empty stack and overflow */
CUR.args = CUR.top - ( Pop_Push_Count[CUR.opcode] >> 4 );
/* `args' is the top of the stack once arguments have been popped. */
/* One can also interpret it as the index of the last argument. */
if ( CUR.args < 0 )
{
FT_UShort i;
if ( CUR.pedantic_hinting )
{
CUR.error = TT_Err_Too_Few_Arguments;
goto LErrorLabel_;
}
/* push zeroes onto the stack */
for ( i = 0; i < Pop_Push_Count[CUR.opcode] >> 4; i++ )
CUR.stack[i] = 0;
CUR.args = 0;
}
CUR.new_top = CUR.args + ( Pop_Push_Count[CUR.opcode] & 15 );
/* `new_top' is the new top of the stack, after the instruction's */
/* execution. `top' will be set to `new_top' after the `switch' */
/* statement. */
if ( CUR.new_top > CUR.stackSize )
{
CUR.error = TT_Err_Stack_Overflow;
goto LErrorLabel_;
}
CUR.step_ins = TRUE;
CUR.error = TT_Err_Ok;
{
FT_Long* args = CUR.stack + CUR.args;
FT_Byte opcode = CUR.opcode;
#undef ARRAY_BOUND_ERROR
#define ARRAY_BOUND_ERROR goto Set_Invalid_Ref
switch ( opcode )
{
/* SVTCA y */
case 0x00:
/* SVTCA x */
case 0x01:
/* SPvTCA y */
case 0x02:
/* SPvTCA x */
case 0x03:
/* SFvTCA y */
case 0x04:
/* SFvTCA x */
case 0x05:
{
FT_Short AA, BB;
AA = (FT_Short)( ( opcode & 1 ) << 14 );
BB = (FT_Short)( AA ^ 0x4000 );
if ( opcode < 4 )
{
CUR.GS.projVector.x = AA;
CUR.GS.projVector.y = BB;
CUR.GS.dualVector.x = AA;
CUR.GS.dualVector.y = BB;
}
else
{
GUESS_VECTOR( projVector );
}
if ( ( opcode & 2 ) == 0 )
{
CUR.GS.freeVector.x = AA;
CUR.GS.freeVector.y = BB;
}
else
{
GUESS_VECTOR( freeVector );
}
COMPUTE_Funcs();
}
break;
/* SPvTL // */
case 0x06:
/* SPvTL + */
case 0x07:
DO_SPVTL
break;
/* SFvTL // */
case 0x08:
/* SFvTL + */
case 0x09:
DO_SFVTL
break;
/* SPvFS */
case 0x0A:
DO_SPVFS
break;
/* SFvFS */
case 0x0B:
DO_SFVFS
break;
/* GPV */
case 0x0C:
DO_GPV
break;
/* GFV */
case 0x0D:
DO_GFV
break;
/* SFvTPv */
case 0x0E:
DO_SFVTPV
break;
/* ISECT */
case 0x0F:
Ins_ISECT( EXEC_ARG_ args );
break;
/* SRP0 */
case 0x10:
DO_SRP0
break;
/* SRP1 */
case 0x11:
DO_SRP1
break;
/* SRP2 */
case 0x12:
DO_SRP2
break;
/* SZP0 */
case 0x13:
Ins_SZP0( EXEC_ARG_ args );
break;
/* SZP1 */
case 0x14:
Ins_SZP1( EXEC_ARG_ args );
break;
/* SZP2 */
case 0x15:
Ins_SZP2( EXEC_ARG_ args );
break;
/* SZPS */
case 0x16:
Ins_SZPS( EXEC_ARG_ args );
break;
/* SLOOP */
case 0x17:
DO_SLOOP
break;
/* RTG */
case 0x18:
DO_RTG
break;
/* RTHG */
case 0x19:
DO_RTHG
break;
/* SMD */
case 0x1A:
DO_SMD
break;
/* ELSE */
case 0x1B:
Ins_ELSE( EXEC_ARG_ args );
break;
/* JMPR */
case 0x1C:
DO_JMPR
break;
/* SCVTCI */
case 0x1D:
DO_SCVTCI
break;
/* SSWCI */
case 0x1E:
DO_SSWCI
break;
/* SSW */
case 0x1F:
DO_SSW
break;
/* DUP */
case 0x20:
DO_DUP
break;
/* POP */
case 0x21:
/* nothing :-) */
break;
/* CLEAR */
case 0x22:
DO_CLEAR
break;
/* SWAP */
case 0x23:
DO_SWAP
break;
/* DEPTH */
case 0x24:
DO_DEPTH
break;
/* CINDEX */
case 0x25:
DO_CINDEX
break;
/* MINDEX */
case 0x26:
Ins_MINDEX( EXEC_ARG_ args );
break;
/* ALIGNPTS */
case 0x27:
Ins_ALIGNPTS( EXEC_ARG_ args );
break;
/* ???? */
case 0x28:
Ins_UNKNOWN( EXEC_ARG_ args );
break;
/* UTP */
case 0x29:
Ins_UTP( EXEC_ARG_ args );
break;
/* LOOPCALL */
case 0x2A:
Ins_LOOPCALL( EXEC_ARG_ args );
break;
/* CALL */
case 0x2B:
Ins_CALL( EXEC_ARG_ args );
break;
/* FDEF */
case 0x2C:
Ins_FDEF( EXEC_ARG_ args );
break;
/* ENDF */
case 0x2D:
Ins_ENDF( EXEC_ARG_ args );
break;
/* MDAP */
case 0x2E:
/* MDAP */
case 0x2F:
Ins_MDAP( EXEC_ARG_ args );
break;
/* IUP */
case 0x30:
/* IUP */
case 0x31:
Ins_IUP( EXEC_ARG_ args );
break;
/* SHP */
case 0x32:
/* SHP */
case 0x33:
Ins_SHP( EXEC_ARG_ args );
break;
/* SHC */
case 0x34:
/* SHC */
case 0x35:
Ins_SHC( EXEC_ARG_ args );
break;
/* SHZ */
case 0x36:
/* SHZ */
case 0x37:
Ins_SHZ( EXEC_ARG_ args );
break;
/* SHPIX */
case 0x38:
Ins_SHPIX( EXEC_ARG_ args );
break;
/* IP */
case 0x39:
Ins_IP( EXEC_ARG_ args );
break;
/* MSIRP */
case 0x3A:
/* MSIRP */
case 0x3B:
Ins_MSIRP( EXEC_ARG_ args );
break;
/* AlignRP */
case 0x3C:
Ins_ALIGNRP( EXEC_ARG_ args );
break;
/* RTDG */
case 0x3D:
DO_RTDG
break;
/* MIAP */
case 0x3E:
/* MIAP */
case 0x3F:
Ins_MIAP( EXEC_ARG_ args );
break;
/* NPUSHB */
case 0x40:
Ins_NPUSHB( EXEC_ARG_ args );
break;
/* NPUSHW */
case 0x41:
Ins_NPUSHW( EXEC_ARG_ args );
break;
/* WS */
case 0x42:
DO_WS
break;
Set_Invalid_Ref:
CUR.error = TT_Err_Invalid_Reference;
break;
/* RS */
case 0x43:
DO_RS
break;
/* WCVTP */
case 0x44:
DO_WCVTP
break;
/* RCVT */
case 0x45:
DO_RCVT
break;
/* GC */
case 0x46:
/* GC */
case 0x47:
Ins_GC( EXEC_ARG_ args );
break;
/* SCFS */
case 0x48:
Ins_SCFS( EXEC_ARG_ args );
break;
/* MD */
case 0x49:
/* MD */
case 0x4A:
Ins_MD( EXEC_ARG_ args );
break;
/* MPPEM */
case 0x4B:
DO_MPPEM
break;
/* MPS */
case 0x4C:
DO_MPS
break;
/* FLIPON */
case 0x4D:
DO_FLIPON
break;
/* FLIPOFF */
case 0x4E:
DO_FLIPOFF
break;
/* DEBUG */
case 0x4F:
DO_DEBUG
break;
/* LT */
case 0x50:
DO_LT
break;
/* LTEQ */
case 0x51:
DO_LTEQ
break;
/* GT */
case 0x52:
DO_GT
break;
/* GTEQ */
case 0x53:
DO_GTEQ
break;
/* EQ */
case 0x54:
DO_EQ
break;
/* NEQ */
case 0x55:
DO_NEQ
break;
/* ODD */
case 0x56:
DO_ODD
break;
/* EVEN */
case 0x57:
DO_EVEN
break;
/* IF */
case 0x58:
Ins_IF( EXEC_ARG_ args );
break;
/* EIF */
case 0x59:
/* do nothing */
break;
/* AND */
case 0x5A:
DO_AND
break;
/* OR */
case 0x5B:
DO_OR
break;
/* NOT */
case 0x5C:
DO_NOT
break;
/* DELTAP1 */
case 0x5D:
Ins_DELTAP( EXEC_ARG_ args );
break;
/* SDB */
case 0x5E:
DO_SDB
break;
/* SDS */
case 0x5F:
DO_SDS
break;
/* ADD */
case 0x60:
DO_ADD
break;
/* SUB */
case 0x61:
DO_SUB
break;
/* DIV */
case 0x62:
DO_DIV
break;
/* MUL */
case 0x63:
DO_MUL
break;
/* ABS */
case 0x64:
DO_ABS
break;
/* NEG */
case 0x65:
DO_NEG
break;
/* FLOOR */
case 0x66:
DO_FLOOR
break;
/* CEILING */
case 0x67:
DO_CEILING
break;
/* ROUND */
case 0x68:
/* ROUND */
case 0x69:
/* ROUND */
case 0x6A:
/* ROUND */
case 0x6B:
DO_ROUND
break;
/* NROUND */
case 0x6C:
/* NROUND */
case 0x6D:
/* NRRUND */
case 0x6E:
/* NROUND */
case 0x6F:
DO_NROUND
break;
/* WCVTF */
case 0x70:
DO_WCVTF
break;
/* DELTAP2 */
case 0x71:
/* DELTAP3 */
case 0x72:
Ins_DELTAP( EXEC_ARG_ args );
break;
/* DELTAC0 */
case 0x73:
/* DELTAC1 */
case 0x74:
/* DELTAC2 */
case 0x75:
Ins_DELTAC( EXEC_ARG_ args );
break;
/* SROUND */
case 0x76:
DO_SROUND
break;
/* S45Round */
case 0x77:
DO_S45ROUND
break;
/* JROT */
case 0x78:
DO_JROT
break;
/* JROF */
case 0x79:
DO_JROF
break;
/* ROFF */
case 0x7A:
DO_ROFF
break;
/* ???? */
case 0x7B:
Ins_UNKNOWN( EXEC_ARG_ args );
break;
/* RUTG */
case 0x7C:
DO_RUTG
break;
/* RDTG */
case 0x7D:
DO_RDTG
break;
/* SANGW */
case 0x7E:
/* AA */
case 0x7F:
/* nothing - obsolete */
break;
/* FLIPPT */
case 0x80:
Ins_FLIPPT( EXEC_ARG_ args );
break;
/* FLIPRGON */
case 0x81:
Ins_FLIPRGON( EXEC_ARG_ args );
break;
/* FLIPRGOFF */
case 0x82:
Ins_FLIPRGOFF( EXEC_ARG_ args );
break;
/* UNKNOWN */
case 0x83:
/* UNKNOWN */
case 0x84:
Ins_UNKNOWN( EXEC_ARG_ args );
break;
/* SCANCTRL */
case 0x85:
Ins_SCANCTRL( EXEC_ARG_ args );
break;
/* SDPVTL */
case 0x86:
/* SDPVTL */
case 0x87:
Ins_SDPVTL( EXEC_ARG_ args );
break;
/* GETINFO */
case 0x88:
Ins_GETINFO( EXEC_ARG_ args );
break;
/* IDEF */
case 0x89:
Ins_IDEF( EXEC_ARG_ args );
break;
/* ROLL */
case 0x8A:
Ins_ROLL( EXEC_ARG_ args );
break;
/* MAX */
case 0x8B:
DO_MAX
break;
/* MIN */
case 0x8C:
DO_MIN
break;
/* SCANTYPE */
case 0x8D:
Ins_SCANTYPE( EXEC_ARG_ args );
break;
/* INSTCTRL */
case 0x8E:
Ins_INSTCTRL( EXEC_ARG_ args );
break;
case 0x8F:
Ins_UNKNOWN( EXEC_ARG_ args );
break;
default:
if ( opcode >= 0xE0 )
Ins_MIRP( EXEC_ARG_ args );
else if ( opcode >= 0xC0 )
Ins_MDRP( EXEC_ARG_ args );
else if ( opcode >= 0xB8 )
Ins_PUSHW( EXEC_ARG_ args );
else if ( opcode >= 0xB0 )
Ins_PUSHB( EXEC_ARG_ args );
else
Ins_UNKNOWN( EXEC_ARG_ args );
}
}
if ( CUR.error != TT_Err_Ok )
{
switch ( CUR.error )
{
/* looking for redefined instructions */
case TT_Err_Invalid_Opcode:
{
TT_DefRecord* def = CUR.IDefs;
TT_DefRecord* limit = def + CUR.numIDefs;
for ( ; def < limit; def++ )
{
if ( def->active && CUR.opcode == (FT_Byte)def->opc )
{
TT_CallRec* callrec;
if ( CUR.callTop >= CUR.callSize )
{
CUR.error = TT_Err_Invalid_Reference;
goto LErrorLabel_;
}
callrec = &CUR.callStack[CUR.callTop];
callrec->Caller_Range = CUR.curRange;
callrec->Caller_IP = CUR.IP + 1;
callrec->Cur_Count = 1;
callrec->Cur_Restart = def->start;
callrec->Cur_End = def->end;
if ( INS_Goto_CodeRange( def->range, def->start ) == FAILURE )
goto LErrorLabel_;
goto LSuiteLabel_;
}
}
}
CUR.error = TT_Err_Invalid_Opcode;
goto LErrorLabel_;
#if 0
/* Unreachable code warning suppression. */
break;
/* Leave to remind in case a later change the editor */
/* to consider break; */
#endif
default:
goto LErrorLabel_;
#if 0
break;
#endif
}
}
CUR.top = CUR.new_top;
if ( CUR.step_ins )
CUR.IP += CUR.length;
/* increment instruction counter and check if we didn't */
/* run this program for too long (e.g. infinite loops). */
if ( ++ins_counter > MAX_RUNNABLE_OPCODES )
return TT_Err_Execution_Too_Long;
LSuiteLabel_:
if ( CUR.IP >= CUR.codeSize )
{
if ( CUR.callTop > 0 )
{
CUR.error = TT_Err_Code_Overflow;
goto LErrorLabel_;
}
else
goto LNo_Error_;
}
} while ( !CUR.instruction_trap );
LNo_Error_:
#ifdef TT_CONFIG_OPTION_STATIC_RASTER
*exc = cur;
#endif
return TT_Err_Ok;
LErrorCodeOverflow_:
CUR.error = TT_Err_Code_Overflow;
LErrorLabel_:
#ifdef TT_CONFIG_OPTION_STATIC_RASTER
*exc = cur;
#endif
/* If any errors have occurred, function tables may be broken. */
/* Force a re-execution of `prep' and `fpgm' tables if no */
/* bytecode debugger is run. */
if ( CUR.error && !CUR.instruction_trap )
{
FT_TRACE1(( " The interpreter returned error 0x%x\n", CUR.error ));
exc->size->cvt_ready = FALSE;
}
return CUR.error;
}
/* END */
/***************************************************************************/
/* */
/* ttsubpix.c */
/* */
/* TrueType Subpixel Hinting. */
/* */
/* Copyright 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* END */
/* gx distortable font */
/***************************************************************************/
/* */
/* ttgxvar.c */
/* */
/* TrueType GX Font Variation loader */
/* */
/* Copyright 2004-2012 by */
/* David Turner, Robert Wilhelm, Werner Lemberg, and George Williams. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* Apple documents the `fvar', `gvar', `cvar', and `avar' tables at */
/* */
/* http://developer.apple.com/fonts/TTRefMan/RM06/Chap6[fgca]var.html */
/* */
/* The documentation for `fvar' is inconsistent. At one point it says */
/* that `countSizePairs' should be 3, at another point 2. It should */
/* be 2. */
/* */
/* The documentation for `gvar' is not intelligible; `cvar' refers you */
/* to `gvar' and is thus also incomprehensible. */
/* */
/* The documentation for `avar' appears correct, but Apple has no fonts */
/* with an `avar' table, so it is hard to test. */
/* */
/* Many thanks to John Jenkins (at Apple) in figuring this out. */
/* */
/* */
/* Apple's `kern' table has some references to tuple indices, but as */
/* there is no indication where these indices are defined, nor how to */
/* interpolate the kerning values (different tuples have different */
/* classes) this issue is ignored. */
/* */
/*************************************************************************/
#define FT_Stream_FTell( stream ) \
( (stream)->cursor - (stream)->base )
#define FT_Stream_SeekSet( stream, off ) \
( (stream)->cursor = (stream)->base+(off) )
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttgxvar
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** Internal Routines *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* The macro ALL_POINTS is used in `ft_var_readpackedpoints'. It */
/* indicates that there is a delta for every point without needing to */
/* enumerate all of them. */
/* */
#define ALL_POINTS (FT_UShort*)( ~0 )
#define GX_PT_POINTS_ARE_WORDS 0x80
#define GX_PT_POINT_RUN_COUNT_MASK 0x7F
/*************************************************************************/
/* */
/* <Function> */
/* ft_var_readpackedpoints */
/* */
/* <Description> */
/* Read a set of points to which the following deltas will apply. */
/* Points are packed with a run length encoding. */
/* */
/* <Input> */
/* stream :: The data stream. */
/* */
/* <Output> */
/* point_cnt :: The number of points read. A zero value means that */
/* all points in the glyph will be affected, without */
/* enumerating them individually. */
/* */
/* <Return> */
/* An array of FT_UShort containing the affected points or the */
/* special value ALL_POINTS. */
/* */
static FT_UShort*
ft_var_readpackedpoints( FT_Stream stream,
FT_UInt *point_cnt )
{
FT_UShort *points = NULL;
FT_Int n;
FT_Int runcnt;
FT_Int i;
FT_Int j;
FT_Int first;
FT_Memory memory = stream->memory;
FT_Error error = TT_Err_Ok;
FT_UNUSED( error );
*point_cnt = n = FT_GET_BYTE();
if ( n == 0 )
return ALL_POINTS;
if ( n & GX_PT_POINTS_ARE_WORDS )
n = FT_GET_BYTE() | ( ( n & GX_PT_POINT_RUN_COUNT_MASK ) << 8 );
if ( FT_NEW_ARRAY( points, n ) )
return NULL;
i = 0;
while ( i < n )
{
runcnt = FT_GET_BYTE();
if ( runcnt & GX_PT_POINTS_ARE_WORDS )
{
runcnt = runcnt & GX_PT_POINT_RUN_COUNT_MASK;
first = points[i++] = FT_GET_USHORT();
if ( runcnt < 1 || i + runcnt >= n )
goto Exit;
/* first point not included in runcount */
for ( j = 0; j < runcnt; ++j )
points[i++] = (FT_UShort)( first += FT_GET_USHORT() );
}
else
{
first = points[i++] = FT_GET_BYTE();
if ( runcnt < 1 || i + runcnt >= n )
goto Exit;
for ( j = 0; j < runcnt; ++j )
points[i++] = (FT_UShort)( first += FT_GET_BYTE() );
}
}
Exit:
return points;
}
enum
{
GX_DT_DELTAS_ARE_ZERO = 0x80,
GX_DT_DELTAS_ARE_WORDS = 0x40,
GX_DT_DELTA_RUN_COUNT_MASK = 0x3F
};
/*************************************************************************/
/* */
/* <Function> */
/* ft_var_readpackeddeltas */
/* */
/* <Description> */
/* Read a set of deltas. These are packed slightly differently than */
/* points. In particular there is no overall count. */
/* */
/* <Input> */
/* stream :: The data stream. */
/* */
/* delta_cnt :: The number of to be read. */
/* */
/* <Return> */
/* An array of FT_Short containing the deltas for the affected */
/* points. (This only gets the deltas for one dimension. It will */
/* generally be called twice, once for x, once for y. When used in */
/* cvt table, it will only be called once.) */
/* */
static FT_Short*
ft_var_readpackeddeltas( FT_Stream stream,
FT_Offset delta_cnt )
{
FT_Short *deltas = NULL;
FT_UInt runcnt;
FT_Offset i;
FT_UInt j;
FT_Memory memory = stream->memory;
FT_Error error = TT_Err_Ok;
FT_UNUSED( error );
if ( FT_NEW_ARRAY( deltas, delta_cnt ) )
return NULL;
i = 0;
while ( i < delta_cnt )
{
runcnt = FT_GET_BYTE();
if ( runcnt & GX_DT_DELTAS_ARE_ZERO )
{
/* runcnt zeroes get added */
for ( j = 0;
j <= ( runcnt & GX_DT_DELTA_RUN_COUNT_MASK ) && i < delta_cnt;
++j )
deltas[i++] = 0;
}
else if ( runcnt & GX_DT_DELTAS_ARE_WORDS )
{
/* runcnt shorts from the stack */
for ( j = 0;
j <= ( runcnt & GX_DT_DELTA_RUN_COUNT_MASK ) && i < delta_cnt;
++j )
deltas[i++] = FT_GET_SHORT();
}
else
{
/* runcnt signed bytes from the stack */
for ( j = 0;
j <= ( runcnt & GX_DT_DELTA_RUN_COUNT_MASK ) && i < delta_cnt;
++j )
deltas[i++] = FT_GET_CHAR();
}
if ( j <= ( runcnt & GX_DT_DELTA_RUN_COUNT_MASK ) )
{
/* Bad format */
FT_FREE( deltas );
return NULL;
}
}
return deltas;
}
/*************************************************************************/
/* */
/* <Function> */
/* ft_var_load_avar */
/* */
/* <Description> */
/* Parse the `avar' table if present. It need not be, so we return */
/* nothing. */
/* */
/* <InOut> */
/* face :: The font face. */
/* */
static void
ft_var_load_avar( TT_Face face )
{
FT_Stream stream = FT_FACE_STREAM(face);
FT_Memory memory = stream->memory;
GX_Blend blend = face->blend;
GX_AVarSegment segment;
FT_Error error = TT_Err_Ok;
FT_ULong version;
FT_Long axisCount;
FT_Int i, j;
FT_ULong table_len;
FT_UNUSED( error );
blend->avar_checked = TRUE;
if ( (error = face->goto_table( face, TTAG_avar, stream, &table_len )) != 0 )
return;
if ( FT_FRAME_ENTER( table_len ) )
return;
version = FT_GET_LONG();
axisCount = FT_GET_LONG();
if ( version != 0x00010000L ||
axisCount != (FT_Long)blend->mmvar->num_axis )
goto Exit;
if ( FT_NEW_ARRAY( blend->avar_segment, axisCount ) )
goto Exit;
segment = &blend->avar_segment[0];
for ( i = 0; i < axisCount; ++i, ++segment )
{
segment->pairCount = FT_GET_USHORT();
if ( FT_NEW_ARRAY( segment->correspondence, segment->pairCount ) )
{
/* Failure. Free everything we have done so far. We must do */
/* it right now since loading the `avar' table is optional. */
for ( j = i - 1; j >= 0; --j )
FT_FREE( blend->avar_segment[j].correspondence );
FT_FREE( blend->avar_segment );
blend->avar_segment = NULL;
goto Exit;
}
for ( j = 0; j < segment->pairCount; ++j )
{
segment->correspondence[j].fromCoord =
/* convert to Fixed */
FT_GET_SHORT() << 2;
segment->correspondence[j].toCoord =
/* convert to Fixed */
FT_GET_SHORT()<<2;
}
}
Exit:
FT_FRAME_EXIT();
}
typedef struct GX_GVar_Head_
{
FT_Long version;
FT_UShort axisCount;
FT_UShort globalCoordCount;
FT_ULong offsetToCoord;
FT_UShort glyphCount;
FT_UShort flags;
FT_ULong offsetToData;
} GX_GVar_Head;
/*************************************************************************/
/* */
/* <Function> */
/* ft_var_load_gvar */
/* */
/* <Description> */
/* Parses the `gvar' table if present. If `fvar' is there, `gvar' */
/* had better be there too. */
/* */
/* <InOut> */
/* face :: The font face. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
static FT_Error
ft_var_load_gvar( TT_Face face )
{
FT_Stream stream = FT_FACE_STREAM(face);
FT_Memory memory = stream->memory;
GX_Blend blend = face->blend;
FT_Error error;
FT_UInt i, j;
FT_ULong table_len;
FT_ULong gvar_start;
FT_ULong offsetToData;
GX_GVar_Head gvar_head;
static const FT_Frame_Field gvar_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE GX_GVar_Head
FT_FRAME_START( 20 ),
FT_FRAME_LONG ( version ),
FT_FRAME_USHORT( axisCount ),
FT_FRAME_USHORT( globalCoordCount ),
FT_FRAME_ULONG ( offsetToCoord ),
FT_FRAME_USHORT( glyphCount ),
FT_FRAME_USHORT( flags ),
FT_FRAME_ULONG ( offsetToData ),
FT_FRAME_END
};
if ( (error = face->goto_table( face, TTAG_gvar, stream, &table_len )) != 0 )
goto Exit;
gvar_start = FT_STREAM_POS( );
if ( FT_STREAM_READ_FIELDS( gvar_fields, &gvar_head ) )
goto Exit;
blend->tuplecount = gvar_head.globalCoordCount;
blend->gv_glyphcnt = gvar_head.glyphCount;
offsetToData = gvar_start + gvar_head.offsetToData;
if ( gvar_head.version != (FT_Long)0x00010000L ||
gvar_head.axisCount != (FT_UShort)blend->mmvar->num_axis )
{
error = TT_Err_Invalid_Table;
goto Exit;
}
if ( FT_NEW_ARRAY( blend->glyphoffsets, blend->gv_glyphcnt + 1 ) )
goto Exit;
if ( gvar_head.flags & 1 )
{
/* long offsets (one more offset than glyphs, to mark size of last) */
if ( FT_FRAME_ENTER( ( blend->gv_glyphcnt + 1 ) * 4L ) )
goto Exit;
for ( i = 0; i <= blend->gv_glyphcnt; ++i )
blend->glyphoffsets[i] = offsetToData + FT_GET_LONG();
FT_FRAME_EXIT();
}
else
{
/* short offsets (one more offset than glyphs, to mark size of last) */
if ( FT_FRAME_ENTER( ( blend->gv_glyphcnt + 1 ) * 2L ) )
goto Exit;
for ( i = 0; i <= blend->gv_glyphcnt; ++i )
blend->glyphoffsets[i] = offsetToData + FT_GET_USHORT() * 2;
/* XXX: Undocumented: `*2'! */
FT_FRAME_EXIT();
}
if ( blend->tuplecount != 0 )
{
if ( FT_NEW_ARRAY( blend->tuplecoords,
gvar_head.axisCount * blend->tuplecount ) )
goto Exit;
if ( FT_STREAM_SEEK( gvar_start + gvar_head.offsetToCoord ) ||
FT_FRAME_ENTER( blend->tuplecount * gvar_head.axisCount * 2L ) )
goto Exit;
for ( i = 0; i < blend->tuplecount; ++i )
for ( j = 0 ; j < (FT_UInt)gvar_head.axisCount; ++j )
blend->tuplecoords[i * gvar_head.axisCount + j] =
/* convert to FT_Fixed */
FT_GET_SHORT() << 2;
FT_FRAME_EXIT();
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* ft_var_apply_tuple */
/* */
/* <Description> */
/* Figure out whether a given tuple (design) applies to the current */
/* blend, and if so, what is the scaling factor. */
/* */
/* <Input> */
/* blend :: The current blend of the font. */
/* */
/* tupleIndex :: A flag saying whether this is an intermediate */
/* tuple or not. */
/* */
/* tuple_coords :: The coordinates of the tuple in normalized axis */
/* units. */
/* */
/* im_start_coords :: The initial coordinates where this tuple starts */
/* to apply (for intermediate coordinates). */
/* */
/* im_end_coords :: The final coordinates after which this tuple no */
/* longer applies (for intermediate coordinates). */
/* */
/* <Return> */
/* An FT_Fixed value containing the scaling factor. */
/* */
static FT_Fixed
ft_var_apply_tuple( GX_Blend blend,
FT_UShort tupleIndex,
FT_Fixed* tuple_coords,
FT_Fixed* im_start_coords,
FT_Fixed* im_end_coords )
{
FT_UInt i;
FT_Fixed apply = 0x10000L;
for ( i = 0; i < blend->num_axis; ++i )
{
if ( tuple_coords[i] == 0 )
/* It's not clear why (for intermediate tuples) we don't need */
/* to check against start/end -- the documentation says we don't. */
/* Similarly, it's unclear why we don't need to scale along the */
/* axis. */
continue;
else if ( blend->normalizedcoords[i] == 0 ||
( blend->normalizedcoords[i] < 0 && tuple_coords[i] > 0 ) ||
( blend->normalizedcoords[i] > 0 && tuple_coords[i] < 0 ) )
{
apply = 0;
break;
}
else if ( !( tupleIndex & GX_TI_INTERMEDIATE_TUPLE ) )
/* not an intermediate tuple */
apply = FT_MulFix( apply,
blend->normalizedcoords[i] > 0
? blend->normalizedcoords[i]
: -blend->normalizedcoords[i] );
else if ( blend->normalizedcoords[i] <= im_start_coords[i] ||
blend->normalizedcoords[i] >= im_end_coords[i] )
{
apply = 0;
break;
}
else if ( blend->normalizedcoords[i] < tuple_coords[i] )
apply = FT_MulDiv( apply,
blend->normalizedcoords[i] - im_start_coords[i],
tuple_coords[i] - im_start_coords[i] );
else
apply = FT_MulDiv( apply,
im_end_coords[i] - blend->normalizedcoords[i],
im_end_coords[i] - tuple_coords[i] );
}
return apply;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** MULTIPLE MASTERS SERVICE FUNCTIONS *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct GX_FVar_Head_
{
FT_Long version;
FT_UShort offsetToData;
FT_UShort countSizePairs;
FT_UShort axisCount;
FT_UShort axisSize;
FT_UShort instanceCount;
FT_UShort instanceSize;
} GX_FVar_Head;
typedef struct fvar_axis_
{
FT_ULong axisTag;
FT_ULong minValue;
FT_ULong defaultValue;
FT_ULong maxValue;
FT_UShort flags;
FT_UShort nameID;
} GX_FVar_Axis;
/*************************************************************************/
/* */
/* <Function> */
/* TT_Get_MM_Var */
/* */
/* <Description> */
/* Check that the font's `fvar' table is valid, parse it, and return */
/* those data. */
/* */
/* <InOut> */
/* face :: The font face. */
/* TT_Get_MM_Var initializes the blend structure. */
/* */
/* <Output> */
/* master :: The `fvar' data (must be freed by caller). */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Get_MM_Var( TT_Face face,
FT_MM_Var* *master )
{
FT_Stream stream = face->root.stream;
FT_Memory memory = face->root.memory;
FT_ULong table_len;
FT_Error error = TT_Err_Ok;
FT_ULong fvar_start;
FT_Int i, j;
FT_MM_Var* mmvar = NULL;
FT_Fixed* next_coords;
FT_String* next_name;
FT_Var_Axis* a;
FT_Var_Named_Style* ns;
GX_FVar_Head fvar_head;
static const FT_Frame_Field fvar_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE GX_FVar_Head
FT_FRAME_START( 16 ),
FT_FRAME_LONG ( version ),
FT_FRAME_USHORT( offsetToData ),
FT_FRAME_USHORT( countSizePairs ),
FT_FRAME_USHORT( axisCount ),
FT_FRAME_USHORT( axisSize ),
FT_FRAME_USHORT( instanceCount ),
FT_FRAME_USHORT( instanceSize ),
FT_FRAME_END
};
static const FT_Frame_Field fvaraxis_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE GX_FVar_Axis
FT_FRAME_START( 20 ),
FT_FRAME_ULONG ( axisTag ),
FT_FRAME_ULONG ( minValue ),
FT_FRAME_ULONG ( defaultValue ),
FT_FRAME_ULONG ( maxValue ),
FT_FRAME_USHORT( flags ),
FT_FRAME_USHORT( nameID ),
FT_FRAME_END
};
if ( face->blend == NULL )
{
/* both `fvar' and `gvar' must be present */
if ( (error = face->goto_table( face, TTAG_gvar,
stream, &table_len )) != 0 )
goto Exit;
if ( (error = face->goto_table( face, TTAG_fvar,
stream, &table_len )) != 0 )
goto Exit;
fvar_start = FT_STREAM_POS( );
if ( FT_STREAM_READ_FIELDS( fvar_fields, &fvar_head ) )
goto Exit;
if ( fvar_head.version != (FT_Long)0x00010000L ||
fvar_head.countSizePairs != 2 ||
fvar_head.axisSize != 20 ||
/* axisCount limit implied by 16-bit instanceSize */
fvar_head.axisCount > 0x3FFE ||
fvar_head.instanceSize != 4 + 4 * fvar_head.axisCount ||
/* instanceCount limit implied by limited range of name IDs */
fvar_head.instanceCount > 0x7EFF ||
fvar_head.offsetToData + fvar_head.axisCount * 20U +
fvar_head.instanceCount * fvar_head.instanceSize > table_len )
{
error = TT_Err_Invalid_Table;
goto Exit;
}
if ( FT_NEW( face->blend ) )
goto Exit;
/* cannot overflow 32-bit arithmetic because of limits above */
face->blend->mmvar_len =
sizeof ( FT_MM_Var ) +
fvar_head.axisCount * sizeof ( FT_Var_Axis ) +
fvar_head.instanceCount * sizeof ( FT_Var_Named_Style ) +
fvar_head.instanceCount * fvar_head.axisCount * sizeof ( FT_Fixed ) +
5 * fvar_head.axisCount;
if ( FT_ALLOC( mmvar, face->blend->mmvar_len ) )
goto Exit;
face->blend->mmvar = mmvar;
mmvar->num_axis =
fvar_head.axisCount;
mmvar->num_designs =
/* meaningless in this context; each glyph */
~0;
/* may have a different number of designs */
/* (or tuples, as called by Apple) */
mmvar->num_namedstyles =
fvar_head.instanceCount;
mmvar->axis =
(FT_Var_Axis*)&(mmvar[1]);
mmvar->namedstyle =
(FT_Var_Named_Style*)&(mmvar->axis[fvar_head.axisCount]);
next_coords =
(FT_Fixed*)&(mmvar->namedstyle[fvar_head.instanceCount]);
for ( i = 0; i < fvar_head.instanceCount; ++i )
{
mmvar->namedstyle[i].coords = next_coords;
next_coords += fvar_head.axisCount;
}
next_name = (FT_String*)next_coords;
for ( i = 0; i < fvar_head.axisCount; ++i )
{
mmvar->axis[i].name = next_name;
next_name += 5;
}
if ( FT_STREAM_SEEK( fvar_start + fvar_head.offsetToData ) )
goto Exit;
a = mmvar->axis;
for ( i = 0; i < fvar_head.axisCount; ++i )
{
GX_FVar_Axis axis_rec;
if ( FT_STREAM_READ_FIELDS( fvaraxis_fields, &axis_rec ) )
goto Exit;
a->tag = axis_rec.axisTag;
/* A Fixed */
a->minimum = axis_rec.minValue;
/* A Fixed */
a->def = axis_rec.defaultValue;
/* A Fixed */
a->maximum = axis_rec.maxValue;
a->strid = axis_rec.nameID;
a->name[0] = (FT_String)( a->tag >> 24 );
a->name[1] = (FT_String)( ( a->tag >> 16 ) & 0xFF );
a->name[2] = (FT_String)( ( a->tag >> 8 ) & 0xFF );
a->name[3] = (FT_String)( ( a->tag ) & 0xFF );
a->name[4] = 0;
++a;
}
ns = mmvar->namedstyle;
for ( i = 0; i < fvar_head.instanceCount; ++i, ++ns )
{
if ( FT_FRAME_ENTER( 4L + 4L * fvar_head.axisCount ) )
goto Exit;
ns->strid = FT_GET_USHORT();
/* flags = */ (void) FT_GET_USHORT();
for ( j = 0; j < fvar_head.axisCount; ++j )
/* A Fixed */
ns->coords[j] = FT_GET_ULONG();
FT_FRAME_EXIT();
}
}
if ( master != NULL )
{
FT_UInt n;
if ( FT_ALLOC( mmvar, face->blend->mmvar_len ) )
goto Exit;
FT_MEM_COPY( mmvar, face->blend->mmvar, face->blend->mmvar_len );
mmvar->axis =
(FT_Var_Axis*)&(mmvar[1]);
mmvar->namedstyle =
(FT_Var_Named_Style*)&(mmvar->axis[mmvar->num_axis]);
next_coords =
(FT_Fixed*)&(mmvar->namedstyle[mmvar->num_namedstyles]);
for ( n = 0; n < mmvar->num_namedstyles; ++n )
{
mmvar->namedstyle[n].coords = next_coords;
next_coords += mmvar->num_axis;
}
a = mmvar->axis;
next_name = (FT_String*)next_coords;
for ( n = 0; n < mmvar->num_axis; ++n )
{
a->name = next_name;
/* standard PostScript names for some standard apple tags */
if ( a->tag == TTAG_wght )
a->name = (char *)"Weight";
else if ( a->tag == TTAG_wdth )
a->name = (char *)"Width";
else if ( a->tag == TTAG_opsz )
a->name = (char *)"OpticalSize";
else if ( a->tag == TTAG_slnt )
a->name = (char *)"Slant";
next_name += 5;
++a;
}
*master = mmvar;
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Set_MM_Blend */
/* */
/* <Description> */
/* Set the blend (normalized) coordinates for this instance of the */
/* font. Check that the `gvar' table is reasonable and does some */
/* initial preparation. */
/* */
/* <InOut> */
/* face :: The font. */
/* Initialize the blend structure with `gvar' data. */
/* */
/* <Input> */
/* num_coords :: Must be the axis count of the font. */
/* */
/* coords :: An array of num_coords, each between [-1,1]. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Set_MM_Blend( TT_Face face,
FT_UInt num_coords,
FT_Fixed* coords )
{
FT_Error error = TT_Err_Ok;
GX_Blend blend;
FT_MM_Var* mmvar;
FT_UInt i;
FT_Memory memory = face->root.memory;
enum
{
mcvt_retain,
mcvt_modify,
mcvt_load
} manageCvt;
face->doblend = FALSE;
if ( face->blend == NULL )
{
if ( (error = TT_Get_MM_Var( face, NULL)) != 0 )
goto Exit;
}
blend = face->blend;
mmvar = blend->mmvar;
if ( num_coords != mmvar->num_axis )
{
error = TT_Err_Invalid_Argument;
goto Exit;
}
for ( i = 0; i < num_coords; ++i )
if ( coords[i] < -0x00010000L || coords[i] > 0x00010000L )
{
error = TT_Err_Invalid_Argument;
goto Exit;
}
if ( blend->glyphoffsets == NULL )
if ( (error = ft_var_load_gvar( face )) != 0 )
goto Exit;
if ( blend->normalizedcoords == NULL )
{
if ( FT_NEW_ARRAY( blend->normalizedcoords, num_coords ) )
goto Exit;
manageCvt = mcvt_modify;
/* If we have not set the blend coordinates before this, then the */
/* cvt table will still be what we read from the `cvt ' table and */
/* we don't need to reload it. We may need to change it though... */
}
else
{
manageCvt = mcvt_retain;
for ( i = 0; i < num_coords; ++i )
{
if ( blend->normalizedcoords[i] != coords[i] )
{
manageCvt = mcvt_load;
break;
}
}
/* If we don't change the blend coords then we don't need to do */
/* anything to the cvt table. It will be correct. Otherwise we */
/* no longer have the original cvt (it was modified when we set */
/* the blend last time), so we must reload and then modify it. */
}
blend->num_axis = num_coords;
FT_MEM_COPY( blend->normalizedcoords,
coords,
num_coords * sizeof ( FT_Fixed ) );
face->doblend = TRUE;
if ( face->cvt != NULL )
{
switch ( manageCvt )
{
case mcvt_load:
/* The cvt table has been loaded already; every time we change the */
/* blend we may need to reload and remodify the cvt table. */
FT_FREE( face->cvt );
face->cvt = NULL;
tt_face_load_cvt( face, face->root.stream );
break;
case mcvt_modify:
/* The original cvt table is in memory. All we need to do is */
/* apply the `cvar' table (if any). */
tt_face_vary_cvt( face, face->root.stream );
break;
case mcvt_retain:
/* The cvt table is correct for this set of coordinates. */
break;
}
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Set_Var_Design */
/* */
/* <Description> */
/* Set the coordinates for the instance, measured in the user */
/* coordinate system. Parse the `avar' table (if present) to convert */
/* from user to normalized coordinates. */
/* */
/* <InOut> */
/* face :: The font face. */
/* Initialize the blend struct with `gvar' data. */
/* */
/* <Input> */
/* num_coords :: This must be the axis count of the font. */
/* */
/* coords :: A coordinate array with `num_coords' elements. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Set_Var_Design( TT_Face face,
FT_UInt num_coords,
FT_Fixed* coords )
{
FT_Error error = TT_Err_Ok;
FT_Fixed* normalized = NULL;
GX_Blend blend;
FT_MM_Var* mmvar;
FT_UInt i, j;
FT_Var_Axis* a;
GX_AVarSegment av;
FT_Memory memory = face->root.memory;
if ( face->blend == NULL )
{
if ( (error = TT_Get_MM_Var( face, NULL )) != 0 )
goto Exit;
}
blend = face->blend;
mmvar = blend->mmvar;
if ( num_coords != mmvar->num_axis )
{
error = TT_Err_Invalid_Argument;
goto Exit;
}
/* Axis normalization is a two stage process. First we normalize */
/* based on the [min,def,max] values for the axis to be [-1,0,1]. */
/* Then, if there's an `avar' table, we renormalize this range. */
if ( FT_NEW_ARRAY( normalized, mmvar->num_axis ) )
goto Exit;
a = mmvar->axis;
for ( i = 0; i < mmvar->num_axis; ++i, ++a )
{
if ( coords[i] > a->maximum || coords[i] < a->minimum )
{
error = TT_Err_Invalid_Argument;
goto Exit;
}
if ( coords[i] < a->def )
normalized[i] = -FT_DivFix( coords[i] - a->def, a->minimum - a->def );
else if ( a->maximum == a->def )
normalized[i] = 0;
else
normalized[i] = FT_DivFix( coords[i] - a->def, a->maximum - a->def );
}
if ( !blend->avar_checked )
ft_var_load_avar( face );
if ( blend->avar_segment != NULL )
{
av = blend->avar_segment;
for ( i = 0; i < mmvar->num_axis; ++i, ++av )
{
for ( j = 1; j < (FT_UInt)av->pairCount; ++j )
if ( normalized[i] < av->correspondence[j].fromCoord )
{
normalized[i] =
FT_MulDiv( normalized[i] - av->correspondence[j - 1].fromCoord,
av->correspondence[j].toCoord -
av->correspondence[j - 1].toCoord,
av->correspondence[j].fromCoord -
av->correspondence[j - 1].fromCoord ) +
av->correspondence[j - 1].toCoord;
break;
}
}
}
error = TT_Set_MM_Blend( face, num_coords, normalized );
Exit:
FT_FREE( normalized );
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** GX VAR PARSING ROUTINES *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* tt_face_vary_cvt */
/* */
/* <Description> */
/* Modify the loaded cvt table according to the `cvar' table and the */
/* font's blend. */
/* */
/* <InOut> */
/* face :: A handle to the target face object. */
/* */
/* <Input> */
/* stream :: A handle to the input stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* Most errors are ignored. It is perfectly valid not to have a */
/* `cvar' table even if there is a `gvar' and `fvar' table. */
/* */
FT_LOCAL_DEF( FT_Error )
tt_face_vary_cvt( TT_Face face,
FT_Stream stream )
{
FT_Error error;
FT_Memory memory = stream->memory;
FT_ULong table_start;
FT_ULong table_len;
FT_UInt tupleCount;
FT_ULong offsetToData;
FT_ULong here;
FT_UInt i, j;
FT_Fixed* tuple_coords = NULL;
FT_Fixed* im_start_coords = NULL;
FT_Fixed* im_end_coords = NULL;
GX_Blend blend = face->blend;
FT_UInt point_count;
FT_UShort* localpoints;
FT_Short* deltas;
FT_TRACE2(( "CVAR " ));
if ( blend == NULL )
{
FT_TRACE2(( "tt_face_vary_cvt: no blend specified\n" ));
error = TT_Err_Ok;
goto Exit;
}
if ( face->cvt == NULL )
{
FT_TRACE2(( "tt_face_vary_cvt: no `cvt ' table\n" ));
error = TT_Err_Ok;
goto Exit;
}
error = face->goto_table( face, TTAG_cvar, stream, &table_len );
if ( error )
{
FT_TRACE2(( "is missing\n" ));
error = TT_Err_Ok;
goto Exit;
}
if ( FT_FRAME_ENTER( table_len ) )
{
error = TT_Err_Ok;
goto Exit;
}
table_start = FT_Stream_FTell( stream );
if ( FT_GET_LONG() != 0x00010000L )
{
FT_TRACE2(( "bad table version\n" ));
error = TT_Err_Ok;
goto FExit;
}
if ( FT_NEW_ARRAY( tuple_coords, blend->num_axis ) ||
FT_NEW_ARRAY( im_start_coords, blend->num_axis ) ||
FT_NEW_ARRAY( im_end_coords, blend->num_axis ) )
goto FExit;
tupleCount = FT_GET_USHORT();
offsetToData = table_start + FT_GET_USHORT();
/* The documentation implies there are flags packed into the */
/* tuplecount, but John Jenkins says that shared points don't apply */
/* to `cvar', and no other flags are defined. */
for ( i = 0; i < ( tupleCount & 0xFFF ); ++i )
{
FT_UInt tupleDataSize;
FT_UInt tupleIndex;
FT_Fixed apply;
tupleDataSize = FT_GET_USHORT();
tupleIndex = FT_GET_USHORT();
/* There is no provision here for a global tuple coordinate section, */
/* so John says. There are no tuple indices, just embedded tuples. */
if ( tupleIndex & GX_TI_EMBEDDED_TUPLE_COORD )
{
for ( j = 0; j < blend->num_axis; ++j )
/* convert from */
tuple_coords[j] = FT_GET_SHORT() << 2;
/* short frac to fixed */
}
else
{
/* skip this tuple; it makes no sense */
if ( tupleIndex & GX_TI_INTERMEDIATE_TUPLE )
for ( j = 0; j < 2 * blend->num_axis; ++j )
(void)FT_GET_SHORT();
offsetToData += tupleDataSize;
continue;
}
if ( tupleIndex & GX_TI_INTERMEDIATE_TUPLE )
{
for ( j = 0; j < blend->num_axis; ++j )
im_start_coords[j] = FT_GET_SHORT() << 2;
for ( j = 0; j < blend->num_axis; ++j )
im_end_coords[j] = FT_GET_SHORT() << 2;
}
apply = ft_var_apply_tuple( blend,
(FT_UShort)tupleIndex,
tuple_coords,
im_start_coords,
im_end_coords );
/* tuple isn't active for our blend */
if (
apply == 0 ||
/* global points not allowed, */
/* if they aren't local, makes no sense */
!( tupleIndex & GX_TI_PRIVATE_POINT_NUMBERS ) )
{
offsetToData += tupleDataSize;
continue;
}
here = FT_Stream_FTell( stream );
FT_Stream_SeekSet( stream, offsetToData );
localpoints = ft_var_readpackedpoints( stream, &point_count );
deltas = ft_var_readpackeddeltas( stream,
point_count == 0 ? face->cvt_size
: point_count );
if ( localpoints == NULL || deltas == NULL )
/* failure, ignore it */ ;
else if ( localpoints == ALL_POINTS )
{
/* this means that there are deltas for every entry in cvt */
for ( j = 0; j < face->cvt_size; ++j )
face->cvt[j] = (FT_Short)( face->cvt[j] +
FT_MulFix( deltas[j], apply ) );
}
else
{
for ( j = 0; j < point_count; ++j )
{
int pindex = localpoints[j];
face->cvt[pindex] = (FT_Short)( face->cvt[pindex] +
FT_MulFix( deltas[j], apply ) );
}
}
if ( localpoints != ALL_POINTS )
FT_FREE( localpoints );
FT_FREE( deltas );
offsetToData += tupleDataSize;
FT_Stream_SeekSet( stream, here );
}
FExit:
FT_FRAME_EXIT();
Exit:
FT_FREE( tuple_coords );
FT_FREE( im_start_coords );
FT_FREE( im_end_coords );
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Vary_Get_Glyph_Deltas */
/* */
/* <Description> */
/* Load the appropriate deltas for the current glyph. */
/* */
/* <Input> */
/* face :: A handle to the target face object. */
/* */
/* glyph_index :: The index of the glyph being modified. */
/* */
/* n_points :: The number of the points in the glyph, including */
/* phantom points. */
/* */
/* <Output> */
/* deltas :: The array of points to change. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Vary_Get_Glyph_Deltas( TT_Face face,
FT_UInt glyph_index,
FT_Vector* *deltas,
FT_UInt n_points )
{
FT_Stream stream = face->root.stream;
FT_Memory memory = stream->memory;
GX_Blend blend = face->blend;
FT_Vector* delta_xy = NULL;
FT_Error error;
FT_ULong glyph_start;
FT_UInt tupleCount;
FT_ULong offsetToData;
FT_ULong here;
FT_UInt i, j;
FT_Fixed* tuple_coords = NULL;
FT_Fixed* im_start_coords = NULL;
FT_Fixed* im_end_coords = NULL;
FT_UInt point_count, spoint_count = 0;
FT_UShort* sharedpoints = NULL;
FT_UShort* localpoints = NULL;
FT_UShort* points;
FT_Short *deltas_x, *deltas_y;
if ( !face->doblend || blend == NULL )
return TT_Err_Invalid_Argument;
/* to be freed by the caller */
if ( FT_NEW_ARRAY( delta_xy, n_points ) )
goto Exit;
*deltas = delta_xy;
if ( glyph_index >= blend->gv_glyphcnt ||
blend->glyphoffsets[glyph_index] ==
blend->glyphoffsets[glyph_index + 1] )
/* no variation data for this glyph */
return TT_Err_Ok;
if ( FT_STREAM_SEEK( blend->glyphoffsets[glyph_index] ) ||
FT_FRAME_ENTER( blend->glyphoffsets[glyph_index + 1] -
blend->glyphoffsets[glyph_index] ) )
goto Fail1;
glyph_start = FT_Stream_FTell( stream );
/* each set of glyph variation data is formatted similarly to `cvar' */
/* (except we get shared points and global tuples) */
if ( FT_NEW_ARRAY( tuple_coords, blend->num_axis ) ||
FT_NEW_ARRAY( im_start_coords, blend->num_axis ) ||
FT_NEW_ARRAY( im_end_coords, blend->num_axis ) )
goto Fail2;
tupleCount = FT_GET_USHORT();
offsetToData = glyph_start + FT_GET_USHORT();
if ( tupleCount & GX_TC_TUPLES_SHARE_POINT_NUMBERS )
{
here = FT_Stream_FTell( stream );
FT_Stream_SeekSet( stream, offsetToData );
sharedpoints = ft_var_readpackedpoints( stream, &spoint_count );
offsetToData = FT_Stream_FTell( stream );
FT_Stream_SeekSet( stream, here );
}
for ( i = 0; i < ( tupleCount & GX_TC_TUPLE_COUNT_MASK ); ++i )
{
FT_UInt tupleDataSize;
FT_UInt tupleIndex;
FT_Fixed apply;
tupleDataSize = FT_GET_USHORT();
tupleIndex = FT_GET_USHORT();
if ( tupleIndex & GX_TI_EMBEDDED_TUPLE_COORD )
{
for ( j = 0; j < blend->num_axis; ++j )
/* convert from */
tuple_coords[j] = FT_GET_SHORT() << 2;
/* short frac to fixed */
}
else if ( ( tupleIndex & GX_TI_TUPLE_INDEX_MASK ) >= blend->tuplecount )
{
error = TT_Err_Invalid_Table;
goto Fail3;
}
else
{
FT_MEM_COPY(
tuple_coords,
&blend->tuplecoords[(tupleIndex & 0xFFF) * blend->num_axis],
blend->num_axis * sizeof ( FT_Fixed ) );
}
if ( tupleIndex & GX_TI_INTERMEDIATE_TUPLE )
{
for ( j = 0; j < blend->num_axis; ++j )
im_start_coords[j] = FT_GET_SHORT() << 2;
for ( j = 0; j < blend->num_axis; ++j )
im_end_coords[j] = FT_GET_SHORT() << 2;
}
apply = ft_var_apply_tuple( blend,
(FT_UShort)tupleIndex,
tuple_coords,
im_start_coords,
im_end_coords );
/* tuple isn't active for our blend */
if ( apply == 0 )
{
offsetToData += tupleDataSize;
continue;
}
here = FT_Stream_FTell( stream );
if ( tupleIndex & GX_TI_PRIVATE_POINT_NUMBERS )
{
FT_Stream_SeekSet( stream, offsetToData );
localpoints = ft_var_readpackedpoints( stream, &point_count );
points = localpoints;
}
else
{
points = sharedpoints;
point_count = spoint_count;
}
deltas_x = ft_var_readpackeddeltas( stream,
point_count == 0 ? n_points
: point_count );
deltas_y = ft_var_readpackeddeltas( stream,
point_count == 0 ? n_points
: point_count );
if ( points == NULL || deltas_y == NULL || deltas_x == NULL )
/* failure, ignore it */
;
else if ( points == ALL_POINTS )
{
/* this means that there are deltas for every point in the glyph */
for ( j = 0; j < n_points; ++j )
{
delta_xy[j].x += FT_MulFix( deltas_x[j], apply );
delta_xy[j].y += FT_MulFix( deltas_y[j], apply );
}
}
else
{
for ( j = 0; j < point_count; ++j )
{
if ( localpoints[j] >= n_points )
continue;
delta_xy[localpoints[j]].x += FT_MulFix( deltas_x[j], apply );
delta_xy[localpoints[j]].y += FT_MulFix( deltas_y[j], apply );
}
}
if ( localpoints != ALL_POINTS )
FT_FREE( localpoints );
FT_FREE( deltas_x );
FT_FREE( deltas_y );
offsetToData += tupleDataSize;
FT_Stream_SeekSet( stream, here );
}
Fail3:
FT_FREE( tuple_coords );
FT_FREE( im_start_coords );
FT_FREE( im_end_coords );
Fail2:
FT_FRAME_EXIT();
Fail1:
if ( error )
{
FT_FREE( delta_xy );
*deltas = NULL;
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* tt_done_blend */
/* */
/* <Description> */
/* Frees the blend internal data structure. */
/* */
FT_LOCAL_DEF( void )
tt_done_blend( FT_Memory memory,
GX_Blend blend )
{
if ( blend != NULL )
{
FT_UInt i;
FT_FREE( blend->normalizedcoords );
FT_FREE( blend->mmvar );
if ( blend->avar_segment != NULL )
{
for ( i = 0; i < blend->num_axis; ++i )
FT_FREE( blend->avar_segment[i].correspondence );
FT_FREE( blend->avar_segment );
}
FT_FREE( blend->tuplecoords );
FT_FREE( blend->glyphoffsets );
FT_FREE( blend );
}
}
/* END */
/* END */
/***************************************************************************/
/* */
/* type1.c */
/* */
/* FreeType Type 1 driver component (body only). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* t1parse.c */
/* */
/* Type 1 parser (body). */
/* */
/* Copyright 1996-2005, 2008, 2009, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The Type 1 parser is in charge of the following: */
/* */
/* - provide an implementation of a growing sequence of objects called */
/* a `T1_Table' (used to build various tables needed by the loader). */
/* */
/* - opening .pfb and .pfa files to extract their top-level and private */
/* dictionaries. */
/* */
/* - read numbers, arrays & strings from any dictionary. */
/* */
/* See `t1load.c' to see how data is loaded from the font file. */
/* */
/*************************************************************************/
/***************************************************************************/
/* */
/* t1parse.h */
/* */
/* Type 1 parser (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2008 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1PARSE_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Struct> */
/* T1_ParserRec */
/* */
/* <Description> */
/* A PS_ParserRec is an object used to parse a Type 1 fonts very */
/* quickly. */
/* */
/* <Fields> */
/* root :: The root parser. */
/* */
/* stream :: The current input stream. */
/* */
/* base_dict :: A pointer to the top-level dictionary. */
/* */
/* base_len :: The length in bytes of the top dictionary. */
/* */
/* private_dict :: A pointer to the private dictionary. */
/* */
/* private_len :: The length in bytes of the private dictionary. */
/* */
/* in_pfb :: A boolean. Indicates that we are handling a PFB */
/* file. */
/* */
/* in_memory :: A boolean. Indicates a memory-based stream. */
/* */
/* single_block :: A boolean. Indicates that the private dictionary */
/* is stored in lieu of the base dictionary. */
/* */
typedef struct T1_ParserRec_
{
PS_ParserRec root;
FT_Stream stream;
FT_Byte* base_dict;
FT_ULong base_len;
FT_Byte* private_dict;
FT_ULong private_len;
FT_Bool in_pfb;
FT_Bool in_memory;
FT_Bool single_block;
} T1_ParserRec, *T1_Parser;
#define T1_Add_Table( p, i, o, l ) (p)->funcs.add( (p), i, o, l )
#define T1_Done_Table( p ) \
do \
{ \
if ( (p)->funcs.done ) \
(p)->funcs.done( p ); \
} while ( 0 )
#define T1_Release_Table( p ) \
do \
{ \
if ( (p)->funcs.release ) \
(p)->funcs.release( p ); \
} while ( 0 )
#define T1_Skip_Spaces( p ) (p)->root.funcs.skip_spaces( &(p)->root )
#define T1_Skip_PS_Token( p ) (p)->root.funcs.skip_PS_token( &(p)->root )
#define T1_ToInt( p ) (p)->root.funcs.to_int( &(p)->root )
#define T1_ToFixed( p, t ) (p)->root.funcs.to_fixed( &(p)->root, t )
#define T1_ToCoordArray( p, m, c ) \
(p)->root.funcs.to_coord_array( &(p)->root, m, c )
#define T1_ToFixedArray( p, m, f, t ) \
(p)->root.funcs.to_fixed_array( &(p)->root, m, f, t )
#define T1_ToToken( p, t ) \
(p)->root.funcs.to_token( &(p)->root, t )
#define T1_ToTokenArray( p, t, m, c ) \
(p)->root.funcs.to_token_array( &(p)->root, t, m, c )
#define T1_Load_Field( p, f, o, m, pf ) \
(p)->root.funcs.load_field( &(p)->root, f, o, m, pf )
#define T1_Load_Field_Table( p, f, o, m, pf ) \
(p)->root.funcs.load_field_table( &(p)->root, f, o, m, pf )
FT_LOCAL( FT_Error )
T1_New_Parser( T1_Parser parser,
FT_Stream stream,
FT_Memory memory,
PSAux_Service psaux );
FT_LOCAL( FT_Error )
T1_Get_Private_Dict( T1_Parser parser,
PSAux_Service psaux );
FT_LOCAL( void )
T1_Finalize_Parser( T1_Parser parser );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* t1errors.h */
/* */
/* Type 1 error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the Type 1 error enumeration constants. */
/* */
/*************************************************************************/
#define __T1ERRORS_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX T1_Err_
#define FT_ERR_BASE FT_Mod_Err_Type1
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t1parse
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** INPUT STREAM PARSER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* see Adobe Technical Note 5040.Download_Fonts.pdf */
static FT_Error
read_pfb_tag( FT_Stream stream,
FT_UShort *atag,
FT_ULong *asize )
{
FT_Error error;
FT_UShort tag;
FT_ULong size;
*atag = 0;
*asize = 0;
if ( !FT_READ_USHORT( tag ) )
{
if ( tag == 0x8001U || tag == 0x8002U )
{
if ( !FT_READ_ULONG_LE( size ) )
*asize = size;
}
*atag = tag;
}
return error;
}
static FT_Error
check_type1_format( FT_Stream stream,
const char* header_string,
size_t header_length )
{
FT_Error error;
FT_UShort tag;
FT_ULong dummy;
if ( FT_STREAM_SEEK( 0 ) )
goto Exit;
error = read_pfb_tag( stream, &tag, &dummy );
if ( error )
goto Exit;
/* We assume that the first segment in a PFB is always encoded as */
/* text. This might be wrong (and the specification doesn't insist */
/* on that), but we have never seen a counterexample. */
if ( tag != 0x8001U && FT_STREAM_SEEK( 0 ) )
goto Exit;
if ( !FT_FRAME_ENTER( header_length ) )
{
error = T1_Err_Ok;
if ( ft_memcmp( stream->cursor, header_string, header_length ) != 0 )
error = T1_Err_Unknown_File_Format;
FT_FRAME_EXIT();
}
Exit:
return error;
}
FT_LOCAL_DEF( FT_Error )
T1_New_Parser( T1_Parser parser,
FT_Stream stream,
FT_Memory memory,
PSAux_Service psaux )
{
FT_Error error;
FT_UShort tag;
FT_ULong size;
psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );
parser->stream = stream;
parser->base_len = 0;
parser->base_dict = 0;
parser->private_len = 0;
parser->private_dict = 0;
parser->in_pfb = 0;
parser->in_memory = 0;
parser->single_block = 0;
/* check the header format */
error = check_type1_format( stream, "%!PS-AdobeFont", 14 );
if ( error )
{
if ( error != T1_Err_Unknown_File_Format )
goto Exit;
error = check_type1_format( stream, "%!FontType", 10 );
if ( error )
{
FT_TRACE2(( " not a Type 1 font\n" ));
goto Exit;
}
}
/******************************************************************/
/* */
/* Here a short summary of what is going on: */
/* */
/* When creating a new Type 1 parser, we try to locate and load */
/* the base dictionary if this is possible (i.e., for PFB */
/* files). Otherwise, we load the whole font into memory. */
/* */
/* When `loading' the base dictionary, we only setup pointers */
/* in the case of a memory-based stream. Otherwise, we */
/* allocate and load the base dictionary in it. */
/* */
/* parser->in_pfb is set if we are in a binary (`.pfb') font. */
/* parser->in_memory is set if we have a memory stream. */
/* */
/* try to compute the size of the base dictionary; */
/* look for a Postscript binary file tag, i.e., 0x8001 */
if ( FT_STREAM_SEEK( 0L ) )
goto Exit;
error = read_pfb_tag( stream, &tag, &size );
if ( error )
goto Exit;
if ( tag != 0x8001U )
{
/* assume that this is a PFA file for now; an error will */
/* be produced later when more things are checked */
if ( FT_STREAM_SEEK( 0L ) )
goto Exit;
size = stream->size;
}
else
parser->in_pfb = 1;
/* now, try to load `size' bytes of the `base' dictionary we */
/* found previously */
/* if it is a memory-based resource, set up pointers */
if ( !stream->read )
{
parser->base_dict = (FT_Byte*)stream->base + stream->pos;
parser->base_len = size;
parser->in_memory = 1;
/* check that the `size' field is valid */
if ( FT_STREAM_SKIP( size ) )
goto Exit;
}
else
{
/* read segment in memory -- this is clumsy, but so does the format */
if ( FT_ALLOC( parser->base_dict, size ) ||
FT_STREAM_READ( parser->base_dict, size ) )
goto Exit;
parser->base_len = size;
}
parser->root.base = parser->base_dict;
parser->root.cursor = parser->base_dict;
parser->root.limit = parser->root.cursor + parser->base_len;
Exit:
if ( error && !parser->in_memory )
FT_FREE( parser->base_dict );
return error;
}
FT_LOCAL_DEF( void )
T1_Finalize_Parser( T1_Parser parser )
{
FT_Memory memory = parser->root.memory;
/* always free the private dictionary */
FT_FREE( parser->private_dict );
/* free the base dictionary only when we have a disk stream */
if ( !parser->in_memory )
FT_FREE( parser->base_dict );
parser->root.funcs.done( &parser->root );
}
FT_LOCAL_DEF( FT_Error )
T1_Get_Private_Dict( T1_Parser parser,
PSAux_Service psaux )
{
FT_Stream stream = parser->stream;
FT_Memory memory = parser->root.memory;
FT_Error error = T1_Err_Ok;
FT_ULong size;
if ( parser->in_pfb )
{
/* in the case of the PFB format, the private dictionary can be */
/* made of several segments. We thus first read the number of */
/* segments to compute the total size of the private dictionary */
/* then re-read them into memory. */
FT_Long start_pos = FT_STREAM_POS();
FT_UShort tag;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error )
goto Fail;
if ( tag != 0x8002U )
break;
parser->private_len += size;
if ( FT_STREAM_SKIP( size ) )
goto Fail;
}
/* Check that we have a private dictionary there */
/* and allocate private dictionary buffer */
if ( parser->private_len == 0 )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" invalid private dictionary section\n" ));
error = T1_Err_Invalid_File_Format;
goto Fail;
}
if ( FT_STREAM_SEEK( start_pos ) ||
FT_ALLOC( parser->private_dict, parser->private_len ) )
goto Fail;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error || tag != 0x8002U )
{
error = T1_Err_Ok;
break;
}
if ( FT_STREAM_READ( parser->private_dict + parser->private_len,
size ) )
goto Fail;
parser->private_len += size;
}
}
else
{
/* We have already `loaded' the whole PFA font file into memory; */
/* if this is a memory resource, allocate a new block to hold */
/* the private dict. Otherwise, simply overwrite into the base */
/* dictionary block in the heap. */
/* first of all, look at the `eexec' keyword */
FT_Byte* cur = parser->base_dict;
FT_Byte* limit = cur + parser->base_len;
FT_Byte c;
Again:
for (;;)
{
c = cur[0];
/* 9 = 5 letters for `eexec' + */
if ( c == 'e' && cur + 9 < limit )
/* whitespace + 4 chars */
{
if ( cur[1] == 'e' &&
cur[2] == 'x' &&
cur[3] == 'e' &&
cur[4] == 'c' )
break;
}
cur++;
if ( cur >= limit )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" could not find `eexec' keyword\n" ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
}
/* check whether `eexec' was real -- it could be in a comment */
/* or string (as e.g. in u003043t.gsf from ghostscript) */
parser->root.cursor = parser->base_dict;
/* set limit to `eexec' + whitespace + 4 characters */
parser->root.limit = cur + 10;
cur = parser->root.cursor;
limit = parser->root.limit;
while ( cur < limit )
{
if ( *cur == 'e' && ft_strncmp( (char*)cur, "eexec", 5 ) == 0 )
goto Found;
T1_Skip_PS_Token( parser );
if ( parser->root.error )
break;
T1_Skip_Spaces ( parser );
cur = parser->root.cursor;
}
/* we haven't found the correct `eexec'; go back and continue */
/* searching */
cur = limit;
limit = parser->base_dict + parser->base_len;
goto Again;
/* now determine where to write the _encrypted_ binary private */
/* dictionary. We overwrite the base dictionary for disk-based */
/* resources and allocate a new block otherwise */
Found:
parser->root.limit = parser->base_dict + parser->base_len;
T1_Skip_PS_Token( parser );
cur = parser->root.cursor;
limit = parser->root.limit;
/* according to the Type1 spec, the first cipher byte must not be */
/* an ASCII whitespace character code (blank, tab, carriage return */
/* or line feed). We have seen Type 1 fonts with two line feed */
/* characters... So skip now all whitespace character codes. */
while ( cur < limit &&
( *cur == ' ' ||
*cur == '\t' ||
*cur == '\r' ||
*cur == '\n' ) )
++cur;
if ( cur >= limit )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" `eexec' not properly terminated\n" ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
size = parser->base_len - ( cur - parser->base_dict );
if ( parser->in_memory )
{
/* note that we allocate one more byte to put a terminating `0' */
if ( FT_ALLOC( parser->private_dict, size + 1 ) )
goto Fail;
parser->private_len = size;
}
else
{
parser->single_block = 1;
parser->private_dict = parser->base_dict;
parser->private_len = size;
parser->base_dict = 0;
parser->base_len = 0;
}
/* now determine whether the private dictionary is encoded in binary */
/* or hexadecimal ASCII format -- decode it accordingly */
/* we need to access the next 4 bytes (after the final whitespace */
/* following the `eexec' keyword); if they all are hexadecimal */
/* digits, then we have a case of ASCII storage */
if ( cur + 3 < limit &&
ft_isxdigit( cur[0] ) && ft_isxdigit( cur[1] ) &&
ft_isxdigit( cur[2] ) && ft_isxdigit( cur[3] ) )
{
/* ASCII hexadecimal encoding */
FT_Long len;
parser->root.cursor = cur;
(void)psaux->ps_parser_funcs->to_bytes( &parser->root,
parser->private_dict,
parser->private_len,
&len,
0 );
parser->private_len = len;
/* put a safeguard */
parser->private_dict[len] = '\0';
}
else
/* binary encoding -- copy the private dict */
FT_MEM_MOVE( parser->private_dict, cur, size );
}
/* we now decrypt the encoded binary private dictionary */
psaux->t1_decrypt( parser->private_dict, parser->private_len, 55665U );
if ( parser->private_len < 4 )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" invalid private dictionary section\n" ));
error = T1_Err_Invalid_File_Format;
goto Fail;
}
/* replace the four random bytes at the beginning with whitespace */
parser->private_dict[0] = ' ';
parser->private_dict[1] = ' ';
parser->private_dict[2] = ' ';
parser->private_dict[3] = ' ';
parser->root.base = parser->private_dict;
parser->root.cursor = parser->private_dict;
parser->root.limit = parser->root.cursor + parser->private_len;
Fail:
Exit:
return error;
}
/* END */
/***************************************************************************/
/* */
/* t1load.c */
/* */
/* Type 1 font loader (body). */
/* */
/* Copyright 1996-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This is the new and improved Type 1 data loader for FreeType 2. The */
/* old loader has several problems: it is slow, complex, difficult to */
/* maintain, and contains incredible hacks to make it accept some */
/* ill-formed Type 1 fonts without hiccup-ing. Moreover, about 5% of */
/* the Type 1 fonts on my machine still aren't loaded correctly by it. */
/* */
/* This version is much simpler, much faster and also easier to read and */
/* maintain by a great order of magnitude. The idea behind it is to */
/* _not_ try to read the Type 1 token stream with a state machine (i.e. */
/* a Postscript-like interpreter) but rather to perform simple pattern */
/* matching. */
/* */
/* Indeed, nearly all data definitions follow a simple pattern like */
/* */
/* ... /Field <data> ... */
/* */
/* where <data> can be a number, a boolean, a string, or an array of */
/* numbers. There are a few exceptions, namely the encoding, font name, */
/* charstrings, and subrs; they are handled with a special pattern */
/* matching routine. */
/* */
/* All other common cases are handled very simply. The matching rules */
/* are defined in the file `t1tokens.h' through the use of several */
/* macros calls PARSE_XXX. This file is included twice here; the first */
/* time to generate parsing callback functions, the second time to */
/* generate a table of keywords (with pointers to the associated */
/* callback functions). */
/* */
/* The function `parse_dict' simply scans *linearly* a given dictionary */
/* (either the top-level or private one) and calls the appropriate */
/* callback when it encounters an immediate keyword. */
/* */
/* This is by far the fastest way one can find to parse and read all */
/* data. */
/* */
/* This led to tremendous code size reduction. Note that later, the */
/* glyph loader will also be _greatly_ simplified, and the automatic */
/* hinter will replace the clumsy `t1hinter'. */
/* */
/*************************************************************************/
/***************************************************************************/
/* */
/* t1load.h */
/* */
/* Type 1 font loader (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2006, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1LOAD_H__
FT_BEGIN_HEADER
typedef struct T1_Loader_
{
/* parser used to read the stream */
T1_ParserRec parser;
/* number of characters in encoding */
FT_Int num_chars;
/* PS_Table used to store the */
PS_TableRec encoding_table;
/* encoding character names */
FT_Int num_glyphs;
PS_TableRec glyph_names;
PS_TableRec charstrings;
/* For moving .notdef glyph to index 0. */
PS_TableRec swap_table;
FT_Int num_subrs;
PS_TableRec subrs;
FT_Bool fontdata;
/* T1_LOADER_ENCOUNTERED_XXX */
FT_UInt keywords_encountered;
} T1_LoaderRec, *T1_Loader;
/* treatment of some keywords differs depending on whether */
/* they precede or follow certain other keywords */
#define T1_PRIVATE ( 1 << 0 )
#define T1_FONTDIR_AFTER_PRIVATE ( 1 << 1 )
FT_LOCAL( FT_Error )
T1_Open_Face( T1_Face face );
FT_LOCAL( FT_Error )
T1_Get_Multi_Master( T1_Face face,
FT_Multi_Master* master );
FT_LOCAL_DEF( FT_Error )
T1_Get_MM_Var( T1_Face face,
FT_MM_Var* *master );
FT_LOCAL( FT_Error )
T1_Set_MM_Blend( T1_Face face,
FT_UInt num_coords,
FT_Fixed* coords );
FT_LOCAL( FT_Error )
T1_Set_MM_Design( T1_Face face,
FT_UInt num_coords,
FT_Long* coords );
FT_LOCAL_DEF( FT_Error )
T1_Set_Var_Design( T1_Face face,
FT_UInt num_coords,
FT_Fixed* coords );
FT_LOCAL( void )
T1_Done_Blend( T1_Face face );
FT_END_HEADER
/* END */
#define IS_INCREMENTAL ( face->root.internal->incremental_interface != 0 )
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t1load
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** MULTIPLE MASTERS SUPPORT *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static FT_Error
t1_allocate_blend( T1_Face face,
FT_UInt num_designs,
FT_UInt num_axis )
{
PS_Blend blend;
FT_Memory memory = face->root.memory;
FT_Error error = T1_Err_Ok;
blend = face->blend;
if ( !blend )
{
if ( FT_NEW( blend ) )
goto Exit;
blend->num_default_design_vector = 0;
face->blend = blend;
}
/* allocate design data if needed */
if ( num_designs > 0 )
{
if ( blend->num_designs == 0 )
{
FT_UInt nn;
/* allocate the blend `private' and `font_info' dictionaries */
if ( FT_NEW_ARRAY( blend->font_infos[1], num_designs ) ||
FT_NEW_ARRAY( blend->privates[1], num_designs ) ||
FT_NEW_ARRAY( blend->bboxes[1], num_designs ) ||
FT_NEW_ARRAY( blend->weight_vector, num_designs * 2 ) )
goto Exit;
blend->default_weight_vector = blend->weight_vector + num_designs;
blend->font_infos[0] = &face->type1.font_info;
blend->privates [0] = &face->type1.private_dict;
blend->bboxes [0] = &face->type1.font_bbox;
for ( nn = 2; nn <= num_designs; nn++ )
{
blend->privates[nn] = blend->privates [nn - 1] + 1;
blend->font_infos[nn] = blend->font_infos[nn - 1] + 1;
blend->bboxes[nn] = blend->bboxes [nn - 1] + 1;
}
blend->num_designs = num_designs;
}
else if ( blend->num_designs != num_designs )
goto Fail;
}
/* allocate axis data if needed */
if ( num_axis > 0 )
{
if ( blend->num_axis != 0 && blend->num_axis != num_axis )
goto Fail;
blend->num_axis = num_axis;
}
/* allocate the blend design pos table if needed */
num_designs = blend->num_designs;
num_axis = blend->num_axis;
if ( num_designs && num_axis && blend->design_pos[0] == 0 )
{
FT_UInt n;
if ( FT_NEW_ARRAY( blend->design_pos[0], num_designs * num_axis ) )
goto Exit;
for ( n = 1; n < num_designs; n++ )
blend->design_pos[n] = blend->design_pos[0] + num_axis * n;
}
Exit:
return error;
Fail:
error = T1_Err_Invalid_File_Format;
goto Exit;
}
FT_LOCAL_DEF( FT_Error )
T1_Get_Multi_Master( T1_Face face,
FT_Multi_Master* master )
{
PS_Blend blend = face->blend;
FT_UInt n;
FT_Error error;
error = T1_Err_Invalid_Argument;
if ( blend )
{
master->num_axis = blend->num_axis;
master->num_designs = blend->num_designs;
for ( n = 0; n < blend->num_axis; n++ )
{
FT_MM_Axis* axis = master->axis + n;
PS_DesignMap map = blend->design_map + n;
axis->name = blend->axis_names[n];
axis->minimum = map->design_points[0];
axis->maximum = map->design_points[map->num_points - 1];
}
error = T1_Err_Ok;
}
return error;
}
/*************************************************************************/
/* */
/* Given a normalized (blend) coordinate, figure out the design */
/* coordinate appropriate for that value. */
/* */
FT_LOCAL_DEF( FT_Fixed )
mm_axis_unmap( PS_DesignMap axismap,
FT_Fixed ncv )
{
int j;
if ( ncv <= axismap->blend_points[0] )
return INT_TO_FIXED( axismap->design_points[0] );
for ( j = 1; j < axismap->num_points; ++j )
{
if ( ncv <= axismap->blend_points[j] )
return INT_TO_FIXED( axismap->design_points[j - 1] ) +
( axismap->design_points[j] - axismap->design_points[j - 1] ) *
FT_DivFix( ncv - axismap->blend_points[j - 1],
axismap->blend_points[j] -
axismap->blend_points[j - 1] );
}
return INT_TO_FIXED( axismap->design_points[axismap->num_points - 1] );
}
/*************************************************************************/
/* */
/* Given a vector of weights, one for each design, figure out the */
/* normalized axis coordinates which gave rise to those weights. */
/* */
FT_LOCAL_DEF( void )
mm_weights_unmap( FT_Fixed* weights,
FT_Fixed* axiscoords,
FT_UInt axis_count )
{
FT_ASSERT( axis_count <= T1_MAX_MM_AXIS );
if ( axis_count == 1 )
axiscoords[0] = weights[1];
else if ( axis_count == 2 )
{
axiscoords[0] = weights[3] + weights[1];
axiscoords[1] = weights[3] + weights[2];
}
else if ( axis_count == 3 )
{
axiscoords[0] = weights[7] + weights[5] + weights[3] + weights[1];
axiscoords[1] = weights[7] + weights[6] + weights[3] + weights[2];
axiscoords[2] = weights[7] + weights[6] + weights[5] + weights[4];
}
else
{
axiscoords[0] = weights[15] + weights[13] + weights[11] + weights[9] +
weights[7] + weights[5] + weights[3] + weights[1];
axiscoords[1] = weights[15] + weights[14] + weights[11] + weights[10] +
weights[7] + weights[6] + weights[3] + weights[2];
axiscoords[2] = weights[15] + weights[14] + weights[13] + weights[12] +
weights[7] + weights[6] + weights[5] + weights[4];
axiscoords[3] = weights[15] + weights[14] + weights[13] + weights[12] +
weights[11] + weights[10] + weights[9] + weights[8];
}
}
/*************************************************************************/
/* */
/* Just a wrapper around T1_Get_Multi_Master to support the different */
/* arguments needed by the GX var distortable fonts. */
/* */
FT_LOCAL_DEF( FT_Error )
T1_Get_MM_Var( T1_Face face,
FT_MM_Var* *master )
{
FT_Memory memory = face->root.memory;
FT_MM_Var *mmvar = NULL;
FT_Multi_Master mmaster;
FT_Error error;
FT_UInt i;
FT_Fixed axiscoords[T1_MAX_MM_AXIS];
PS_Blend blend = face->blend;
error = T1_Get_Multi_Master( face, &mmaster );
if ( error )
goto Exit;
if ( FT_ALLOC( mmvar,
sizeof ( FT_MM_Var ) +
mmaster.num_axis * sizeof ( FT_Var_Axis ) ) )
goto Exit;
mmvar->num_axis = mmaster.num_axis;
mmvar->num_designs = mmaster.num_designs;
/* Does not apply */
mmvar->num_namedstyles = ~0;
mmvar->axis = (FT_Var_Axis*)&mmvar[1];
/* Point to axes after MM_Var struct */
mmvar->namedstyle = NULL;
for ( i = 0 ; i < mmaster.num_axis; ++i )
{
mmvar->axis[i].name = mmaster.axis[i].name;
mmvar->axis[i].minimum = INT_TO_FIXED( mmaster.axis[i].minimum);
mmvar->axis[i].maximum = INT_TO_FIXED( mmaster.axis[i].maximum);
mmvar->axis[i].def = ( mmvar->axis[i].minimum +
mmvar->axis[i].maximum ) / 2;
/* Does not apply. But this value is in range */
/* Does not apply */
mmvar->axis[i].strid = ~0;
/* Does not apply */
mmvar->axis[i].tag = ~0;
if ( ft_strcmp( mmvar->axis[i].name, "Weight" ) == 0 )
mmvar->axis[i].tag = FT_MAKE_TAG( 'w', 'g', 'h', 't' );
else if ( ft_strcmp( mmvar->axis[i].name, "Width" ) == 0 )
mmvar->axis[i].tag = FT_MAKE_TAG( 'w', 'd', 't', 'h' );
else if ( ft_strcmp( mmvar->axis[i].name, "OpticalSize" ) == 0 )
mmvar->axis[i].tag = FT_MAKE_TAG( 'o', 'p', 's', 'z' );
}
if ( blend->num_designs == ( 1U << blend->num_axis ) )
{
mm_weights_unmap( blend->default_weight_vector,
axiscoords,
blend->num_axis );
for ( i = 0; i < mmaster.num_axis; ++i )
mmvar->axis[i].def = mm_axis_unmap( &blend->design_map[i],
axiscoords[i] );
}
*master = mmvar;
Exit:
return error;
}
FT_LOCAL_DEF( FT_Error )
T1_Set_MM_Blend( T1_Face face,
FT_UInt num_coords,
FT_Fixed* coords )
{
PS_Blend blend = face->blend;
FT_Error error;
FT_UInt n, m;
error = T1_Err_Invalid_Argument;
if ( blend && blend->num_axis == num_coords )
{
/* recompute the weight vector from the blend coordinates */
error = T1_Err_Ok;
for ( n = 0; n < blend->num_designs; n++ )
{
/* 1.0 fixed */
FT_Fixed result = 0x10000L;
for ( m = 0; m < blend->num_axis; m++ )
{
FT_Fixed factor;
/* get current blend axis position */
factor = coords[m];
if ( factor < 0 ) factor = 0;
if ( factor > 0x10000L ) factor = 0x10000L;
if ( ( n & ( 1 << m ) ) == 0 )
factor = 0x10000L - factor;
result = FT_MulFix( result, factor );
}
blend->weight_vector[n] = result;
}
error = T1_Err_Ok;
}
return error;
}
FT_LOCAL_DEF( FT_Error )
T1_Set_MM_Design( T1_Face face,
FT_UInt num_coords,
FT_Long* coords )
{
PS_Blend blend = face->blend;
FT_Error error;
FT_UInt n, p;
error = T1_Err_Invalid_Argument;
if ( blend && blend->num_axis == num_coords )
{
/* compute the blend coordinates through the blend design map */
FT_Fixed final_blends[T1_MAX_MM_DESIGNS];
for ( n = 0; n < blend->num_axis; n++ )
{
FT_Long design = coords[n];
FT_Fixed the_blend;
PS_DesignMap map = blend->design_map + n;
FT_Long* designs = map->design_points;
FT_Fixed* blends = map->blend_points;
FT_Int before = -1, after = -1;
for ( p = 0; p < (FT_UInt)map->num_points; p++ )
{
FT_Long p_design = designs[p];
/* exact match? */
if ( design == p_design )
{
the_blend = blends[p];
goto Found;
}
if ( design < p_design )
{
after = p;
break;
}
before = p;
}
/* now interpolate if necessary */
if ( before < 0 )
the_blend = blends[0];
else if ( after < 0 )
the_blend = blends[map->num_points - 1];
else
the_blend = FT_MulDiv( design - designs[before],
blends [after] - blends [before],
designs[after] - designs[before] );
Found:
final_blends[n] = the_blend;
}
error = T1_Set_MM_Blend( face, num_coords, final_blends );
}
return error;
}
/*************************************************************************/
/* */
/* Just a wrapper around T1_Set_MM_Design to support the different */
/* arguments needed by the GX var distortable fonts. */
/* */
FT_LOCAL_DEF( FT_Error )
T1_Set_Var_Design( T1_Face face,
FT_UInt num_coords,
FT_Fixed* coords )
{
/* maximum axis count is 4 */
FT_Long lcoords[4];
FT_UInt i;
FT_Error error;
error = T1_Err_Invalid_Argument;
if ( num_coords <= 4 && num_coords > 0 )
{
for ( i = 0; i < num_coords; ++i )
lcoords[i] = FIXED_TO_INT( coords[i] );
error = T1_Set_MM_Design( face, num_coords, lcoords );
}
return error;
}
FT_LOCAL_DEF( void )
T1_Done_Blend( T1_Face face )
{
FT_Memory memory = face->root.memory;
PS_Blend blend = face->blend;
if ( blend )
{
FT_UInt num_designs = blend->num_designs;
FT_UInt num_axis = blend->num_axis;
FT_UInt n;
/* release design pos table */
FT_FREE( blend->design_pos[0] );
for ( n = 1; n < num_designs; n++ )
blend->design_pos[n] = 0;
/* release blend `private' and `font info' dictionaries */
FT_FREE( blend->privates[1] );
FT_FREE( blend->font_infos[1] );
FT_FREE( blend->bboxes[1] );
for ( n = 0; n < num_designs; n++ )
{
blend->privates [n] = 0;
blend->font_infos[n] = 0;
blend->bboxes [n] = 0;
}
/* release weight vectors */
FT_FREE( blend->weight_vector );
blend->default_weight_vector = 0;
/* release axis names */
for ( n = 0; n < num_axis; n++ )
FT_FREE( blend->axis_names[n] );
/* release design map */
for ( n = 0; n < num_axis; n++ )
{
PS_DesignMap dmap = blend->design_map + n;
FT_FREE( dmap->design_points );
dmap->num_points = 0;
}
FT_FREE( face->blend );
}
}
static void
parse_blend_axis_types( T1_Face face,
T1_Loader loader )
{
T1_TokenRec axis_tokens[T1_MAX_MM_AXIS];
FT_Int n, num_axis;
FT_Error error = T1_Err_Ok;
PS_Blend blend;
FT_Memory memory;
/* take an array of objects */
T1_ToTokenArray( &loader->parser, axis_tokens,
T1_MAX_MM_AXIS, &num_axis );
if ( num_axis < 0 )
{
error = T1_Err_Ignore;
goto Exit;
}
if ( num_axis == 0 || num_axis > T1_MAX_MM_AXIS )
{
FT_ERROR(( "parse_blend_axis_types: incorrect number of axes: %d\n",
num_axis ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
/* allocate blend if necessary */
error = t1_allocate_blend( face, 0, (FT_UInt)num_axis );
if ( error )
goto Exit;
blend = face->blend;
memory = face->root.memory;
/* each token is an immediate containing the name of the axis */
for ( n = 0; n < num_axis; n++ )
{
T1_Token token = axis_tokens + n;
FT_Byte* name;
FT_PtrDist len;
/* skip first slash, if any */
if ( token->start[0] == '/' )
token->start++;
len = token->limit - token->start;
if ( len == 0 )
{
error = T1_Err_Invalid_File_Format;
goto Exit;
}
if ( FT_ALLOC( blend->axis_names[n], (FT_Long)( len + 1 ) ) )
goto Exit;
name = (FT_Byte*)blend->axis_names[n];
FT_MEM_COPY( name, token->start, len );
name[len] = 0;
}
Exit:
loader->parser.root.error = error;
}
static void
parse_blend_design_positions( T1_Face face,
T1_Loader loader )
{
T1_TokenRec design_tokens[T1_MAX_MM_DESIGNS];
FT_Int num_designs;
FT_Int num_axis;
T1_Parser parser = &loader->parser;
FT_Error error = T1_Err_Ok;
PS_Blend blend;
/* get the array of design tokens -- compute number of designs */
T1_ToTokenArray( parser, design_tokens,
T1_MAX_MM_DESIGNS, &num_designs );
if ( num_designs < 0 )
{
error = T1_Err_Ignore;
goto Exit;
}
if ( num_designs == 0 || num_designs > T1_MAX_MM_DESIGNS )
{
FT_ERROR(( "parse_blend_design_positions:"
" incorrect number of designs: %d\n",
num_designs ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
{
FT_Byte* old_cursor = parser->root.cursor;
FT_Byte* old_limit = parser->root.limit;
FT_Int n;
blend = face->blend;
/* make compiler happy */
num_axis = 0;
for ( n = 0; n < num_designs; n++ )
{
T1_TokenRec axis_tokens[T1_MAX_MM_AXIS];
T1_Token token;
FT_Int axis, n_axis;
/* read axis/coordinates tokens */
token = design_tokens + n;
parser->root.cursor = token->start;
parser->root.limit = token->limit;
T1_ToTokenArray( parser, axis_tokens, T1_MAX_MM_AXIS, &n_axis );
if ( n == 0 )
{
if ( n_axis <= 0 || n_axis > T1_MAX_MM_AXIS )
{
FT_ERROR(( "parse_blend_design_positions:"
" invalid number of axes: %d\n",
n_axis ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
num_axis = n_axis;
error = t1_allocate_blend( face, num_designs, num_axis );
if ( error )
goto Exit;
blend = face->blend;
}
else if ( n_axis != num_axis )
{
FT_ERROR(( "parse_blend_design_positions: incorrect table\n" ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
/* now read each axis token into the design position */
for ( axis = 0; axis < n_axis; axis++ )
{
T1_Token token2 = axis_tokens + axis;
parser->root.cursor = token2->start;
parser->root.limit = token2->limit;
blend->design_pos[n][axis] = T1_ToFixed( parser, 0 );
}
}
loader->parser.root.cursor = old_cursor;
loader->parser.root.limit = old_limit;
}
Exit:
loader->parser.root.error = error;
}
static void
parse_blend_design_map( T1_Face face,
T1_Loader loader )
{
FT_Error error = T1_Err_Ok;
T1_Parser parser = &loader->parser;
PS_Blend blend;
T1_TokenRec axis_tokens[T1_MAX_MM_AXIS];
FT_Int n, num_axis;
FT_Byte* old_cursor;
FT_Byte* old_limit;
FT_Memory memory = face->root.memory;
T1_ToTokenArray( parser, axis_tokens,
T1_MAX_MM_AXIS, &num_axis );
if ( num_axis < 0 )
{
error = T1_Err_Ignore;
goto Exit;
}
if ( num_axis == 0 || num_axis > T1_MAX_MM_AXIS )
{
FT_ERROR(( "parse_blend_design_map: incorrect number of axes: %d\n",
num_axis ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
old_cursor = parser->root.cursor;
old_limit = parser->root.limit;
error = t1_allocate_blend( face, 0, num_axis );
if ( error )
goto Exit;
blend = face->blend;
/* now read each axis design map */
for ( n = 0; n < num_axis; n++ )
{
PS_DesignMap map = blend->design_map + n;
T1_Token axis_token;
T1_TokenRec point_tokens[T1_MAX_MM_MAP_POINTS];
FT_Int p, num_points;
axis_token = axis_tokens + n;
parser->root.cursor = axis_token->start;
parser->root.limit = axis_token->limit;
T1_ToTokenArray( parser, point_tokens,
T1_MAX_MM_MAP_POINTS, &num_points );
if ( num_points <= 0 || num_points > T1_MAX_MM_MAP_POINTS )
{
FT_ERROR(( "parse_blend_design_map: incorrect table\n" ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
/* allocate design map data */
if ( FT_NEW_ARRAY( map->design_points, num_points * 2 ) )
goto Exit;
map->blend_points = map->design_points + num_points;
map->num_points = (FT_Byte)num_points;
for ( p = 0; p < num_points; p++ )
{
T1_Token point_token;
point_token = point_tokens + p;
/* don't include delimiting brackets */
parser->root.cursor = point_token->start + 1;
parser->root.limit = point_token->limit - 1;
map->design_points[p] = T1_ToInt( parser );
map->blend_points [p] = T1_ToFixed( parser, 0 );
}
}
parser->root.cursor = old_cursor;
parser->root.limit = old_limit;
Exit:
parser->root.error = error;
}
static void
parse_weight_vector( T1_Face face,
T1_Loader loader )
{
T1_TokenRec design_tokens[T1_MAX_MM_DESIGNS];
FT_Int num_designs;
FT_Error error = T1_Err_Ok;
T1_Parser parser = &loader->parser;
PS_Blend blend = face->blend;
T1_Token token;
FT_Int n;
FT_Byte* old_cursor;
FT_Byte* old_limit;
T1_ToTokenArray( parser, design_tokens,
T1_MAX_MM_DESIGNS, &num_designs );
if ( num_designs < 0 )
{
error = T1_Err_Ignore;
goto Exit;
}
if ( num_designs == 0 || num_designs > T1_MAX_MM_DESIGNS )
{
FT_ERROR(( "parse_weight_vector:"
" incorrect number of designs: %d\n",
num_designs ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
if ( !blend || !blend->num_designs )
{
error = t1_allocate_blend( face, num_designs, 0 );
if ( error )
goto Exit;
blend = face->blend;
}
else if ( blend->num_designs != (FT_UInt)num_designs )
{
FT_ERROR(( "parse_weight_vector:"
" /BlendDesignPosition and /WeightVector have\n"
" "
" different number of elements\n" ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
old_cursor = parser->root.cursor;
old_limit = parser->root.limit;
for ( n = 0; n < num_designs; n++ )
{
token = design_tokens + n;
parser->root.cursor = token->start;
parser->root.limit = token->limit;
blend->default_weight_vector[n] =
blend->weight_vector[n] = T1_ToFixed( parser, 0 );
}
parser->root.cursor = old_cursor;
parser->root.limit = old_limit;
Exit:
parser->root.error = error;
}
/* e.g., /BuildCharArray [0 0 0 0 0 0 0 0] def */
/* we're only interested in the number of array elements */
static void
parse_buildchar( T1_Face face,
T1_Loader loader )
{
face->len_buildchar = T1_ToFixedArray( &loader->parser, 0, NULL, 0 );
return;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** TYPE 1 SYMBOL PARSING *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static FT_Error
t1_load_keyword( T1_Face face,
T1_Loader loader,
const T1_Field field )
{
FT_Error error;
void* dummy_object;
void** objects;
FT_UInt max_objects;
PS_Blend blend = face->blend;
if ( blend && blend->num_designs == 0 )
blend = NULL;
/* if the keyword has a dedicated callback, call it */
if ( field->type == T1_FIELD_TYPE_CALLBACK )
{
field->reader( (FT_Face)face, loader );
error = loader->parser.root.error;
goto Exit;
}
/* now, the keyword is either a simple field, or a table of fields; */
/* we are now going to take care of it */
switch ( field->location )
{
case T1_FIELD_LOCATION_FONT_INFO:
dummy_object = &face->type1.font_info;
objects = &dummy_object;
max_objects = 0;
if ( blend )
{
objects = (void**)blend->font_infos;
max_objects = blend->num_designs;
}
break;
case T1_FIELD_LOCATION_FONT_EXTRA:
dummy_object = &face->type1.font_extra;
objects = &dummy_object;
max_objects = 0;
break;
case T1_FIELD_LOCATION_PRIVATE:
dummy_object = &face->type1.private_dict;
objects = &dummy_object;
max_objects = 0;
if ( blend )
{
objects = (void**)blend->privates;
max_objects = blend->num_designs;
}
break;
case T1_FIELD_LOCATION_BBOX:
dummy_object = &face->type1.font_bbox;
objects = &dummy_object;
max_objects = 0;
if ( blend )
{
objects = (void**)blend->bboxes;
max_objects = blend->num_designs;
}
break;
case T1_FIELD_LOCATION_LOADER:
dummy_object = loader;
objects = &dummy_object;
max_objects = 0;
break;
case T1_FIELD_LOCATION_FACE:
dummy_object = face;
objects = &dummy_object;
max_objects = 0;
break;
case T1_FIELD_LOCATION_BLEND:
dummy_object = face->blend;
objects = &dummy_object;
max_objects = 0;
break;
default:
dummy_object = &face->type1;
objects = &dummy_object;
max_objects = 0;
}
if ( *objects )
{
if ( field->type == T1_FIELD_TYPE_INTEGER_ARRAY ||
field->type == T1_FIELD_TYPE_FIXED_ARRAY )
error = T1_Load_Field_Table( &loader->parser, field,
objects, max_objects, 0 );
else
error = T1_Load_Field( &loader->parser, field,
objects, max_objects, 0 );
}
else
{
FT_TRACE1(( "t1_load_keyword: ignoring keyword `%s'"
" which is not valid at this point\n"
" (probably due to missing keywords)\n",
field->ident ));
error = T1_Err_Ok;
}
Exit:
return error;
}
static void
parse_private( T1_Face face,
T1_Loader loader )
{
FT_UNUSED( face );
loader->keywords_encountered |= T1_PRIVATE;
}
static int
read_binary_data( T1_Parser parser,
FT_Long* size,
FT_Byte** base,
FT_Bool incremental )
{
FT_Byte* cur;
FT_Byte* limit = parser->root.limit;
/* the binary data has one of the following formats */
/* */
/* `size' [white*] RD white ....... ND */
/* `size' [white*] -| white ....... |- */
/* */
T1_Skip_Spaces( parser );
cur = parser->root.cursor;
if ( cur < limit && ft_isdigit( *cur ) )
{
FT_Long s = T1_ToInt( parser );
/* `RD' or `-|' or something else */
T1_Skip_PS_Token( parser );
/* there is only one whitespace char after the */
/* `RD' or `-|' token */
*base = parser->root.cursor + 1;
if ( s >= 0 && s < limit - *base )
{
parser->root.cursor += s + 1;
*size = s;
return !parser->root.error;
}
}
if( !incremental )
{
FT_ERROR(( "read_binary_data: invalid size field\n" ));
parser->root.error = T1_Err_Invalid_File_Format;
}
return 0;
}
/* We now define the routines to handle the `/Encoding', `/Subrs', */
/* and `/CharStrings' dictionaries. */
static void
t1_parse_font_matrix( T1_Face face,
T1_Loader loader )
{
T1_Parser parser = &loader->parser;
FT_Matrix* matrix = &face->type1.font_matrix;
FT_Vector* offset = &face->type1.font_offset;
FT_Face root = (FT_Face)&face->root;
FT_Fixed temp[6];
FT_Fixed temp_scale;
FT_Int result;
result = T1_ToFixedArray( parser, 6, temp, 3 );
if ( result < 0 )
{
parser->root.error = T1_Err_Invalid_File_Format;
return;
}
temp_scale = FT_ABS( temp[3] );
if ( temp_scale == 0 )
{
FT_ERROR(( "t1_parse_font_matrix: invalid font matrix\n" ));
parser->root.error = T1_Err_Invalid_File_Format;
return;
}
/* Set Units per EM based on FontMatrix values. We set the value to */
/* 1000 / temp_scale, because temp_scale was already multiplied by */
/* 1000 (in t1_tofixed, from psobjs.c). */
root->units_per_EM = (FT_UShort)FT_DivFix( 1000, temp_scale );
/* we need to scale the values by 1.0/temp_scale */
if ( temp_scale != 0x10000L )
{
temp[0] = FT_DivFix( temp[0], temp_scale );
temp[1] = FT_DivFix( temp[1], temp_scale );
temp[2] = FT_DivFix( temp[2], temp_scale );
temp[4] = FT_DivFix( temp[4], temp_scale );
temp[5] = FT_DivFix( temp[5], temp_scale );
temp[3] = temp[3] < 0 ? -0x10000L : 0x10000L;
}
matrix->xx = temp[0];
matrix->yx = temp[1];
matrix->xy = temp[2];
matrix->yy = temp[3];
/* note that the offsets must be expressed in integer font units */
offset->x = temp[4] >> 16;
offset->y = temp[5] >> 16;
}
static void
parse_encoding( T1_Face face,
T1_Loader loader )
{
T1_Parser parser = &loader->parser;
FT_Byte* cur;
FT_Byte* limit = parser->root.limit;
PSAux_Service psaux = (PSAux_Service)face->psaux;
T1_Skip_Spaces( parser );
cur = parser->root.cursor;
if ( cur >= limit )
{
FT_ERROR(( "parse_encoding: out of bounds\n" ));
parser->root.error = T1_Err_Invalid_File_Format;
return;
}
/* if we have a number or `[', the encoding is an array, */
/* and we must load it now */
if ( ft_isdigit( *cur ) || *cur == '[' )
{
T1_Encoding encode = &face->type1.encoding;
FT_Int count, n;
PS_Table char_table = &loader->encoding_table;
FT_Memory memory = parser->root.memory;
FT_Error error;
FT_Bool only_immediates = 0;
/* read the number of entries in the encoding; should be 256 */
if ( *cur == '[' )
{
count = 256;
only_immediates = 1;
parser->root.cursor++;
}
else
count = (FT_Int)T1_ToInt( parser );
T1_Skip_Spaces( parser );
if ( parser->root.cursor >= limit )
return;
/* we use a T1_Table to store our charnames */
loader->num_chars = encode->num_chars = count;
if ( FT_NEW_ARRAY( encode->char_index, count ) ||
FT_NEW_ARRAY( encode->char_name, count ) ||
FT_SET_ERROR( psaux->ps_table_funcs->init(
char_table, count, memory ) ) )
{
parser->root.error = error;
return;
}
/* We need to `zero' out encoding_table.elements */
for ( n = 0; n < count; n++ )
{
char* notdef = (char *)".notdef";
T1_Add_Table( char_table, n, notdef, 8 );
}
/* Now we need to read records of the form */
/* */
/* ... charcode /charname ... */
/* */
/* for each entry in our table. */
/* */
/* We simply look for a number followed by an immediate */
/* name. Note that this ignores correctly the sequence */
/* that is often seen in type1 fonts: */
/* */
/* 0 1 255 { 1 index exch /.notdef put } for dup */
/* */
/* used to clean the encoding array before anything else. */
/* */
/* Alternatively, if the array is directly given as */
/* */
/* /Encoding [ ... ] */
/* */
/* we only read immediates. */
n = 0;
T1_Skip_Spaces( parser );
while ( parser->root.cursor < limit )
{
cur = parser->root.cursor;
/* we stop when we encounter a `def' or `]' */
if ( *cur == 'd' && cur + 3 < limit )
{
if ( cur[1] == 'e' &&
cur[2] == 'f' &&
IS_PS_DELIM( cur[3] ) )
{
FT_TRACE6(( "encoding end\n" ));
cur += 3;
break;
}
}
if ( *cur == ']' )
{
FT_TRACE6(( "encoding end\n" ));
cur++;
break;
}
/* check whether we've found an entry */
if ( ft_isdigit( *cur ) || only_immediates )
{
FT_Int charcode;
if ( only_immediates )
charcode = n;
else
{
charcode = (FT_Int)T1_ToInt( parser );
T1_Skip_Spaces( parser );
}
cur = parser->root.cursor;
if ( cur + 2 < limit && *cur == '/' && n < count )
{
FT_PtrDist len;
cur++;
parser->root.cursor = cur;
T1_Skip_PS_Token( parser );
if ( parser->root.cursor >= limit )
return;
if ( parser->root.error )
return;
len = parser->root.cursor - cur;
parser->root.error = T1_Add_Table( char_table, charcode,
cur, len + 1 );
if ( parser->root.error )
return;
char_table->elements[charcode][len] = '\0';
n++;
}
else if ( only_immediates )
{
/* Since the current position is not updated for */
/* immediates-only mode we would get an infinite loop if */
/* we don't do anything here. */
/* */
/* This encoding array is not valid according to the type1 */
/* specification (it might be an encoding for a CID type1 */
/* font, however), so we conclude that this font is NOT a */
/* type1 font. */
parser->root.error = FT_Err_Unknown_File_Format;
return;
}
}
else
{
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
}
T1_Skip_Spaces( parser );
}
face->type1.encoding_type = T1_ENCODING_TYPE_ARRAY;
parser->root.cursor = cur;
}
/* Otherwise, we should have either `StandardEncoding', */
/* `ExpertEncoding', or `ISOLatin1Encoding' */
else
{
if ( cur + 17 < limit &&
ft_strncmp( (const char*)cur, "StandardEncoding", 16 ) == 0 )
face->type1.encoding_type = T1_ENCODING_TYPE_STANDARD;
else if ( cur + 15 < limit &&
ft_strncmp( (const char*)cur, "ExpertEncoding", 14 ) == 0 )
face->type1.encoding_type = T1_ENCODING_TYPE_EXPERT;
else if ( cur + 18 < limit &&
ft_strncmp( (const char*)cur, "ISOLatin1Encoding", 17 ) == 0 )
face->type1.encoding_type = T1_ENCODING_TYPE_ISOLATIN1;
else
parser->root.error = T1_Err_Ignore;
}
}
static void
parse_subrs( T1_Face face,
T1_Loader loader )
{
T1_Parser parser = &loader->parser;
PS_Table table = &loader->subrs;
FT_Memory memory = parser->root.memory;
FT_Error error;
FT_Int num_subrs;
PSAux_Service psaux = (PSAux_Service)face->psaux;
T1_Skip_Spaces( parser );
/* test for empty array */
if ( parser->root.cursor < parser->root.limit &&
*parser->root.cursor == '[' )
{
T1_Skip_PS_Token( parser );
T1_Skip_Spaces ( parser );
if ( parser->root.cursor >= parser->root.limit ||
*parser->root.cursor != ']' )
parser->root.error = T1_Err_Invalid_File_Format;
return;
}
num_subrs = (FT_Int)T1_ToInt( parser );
/* position the parser right before the `dup' of the first subr */
/* `array' */
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
T1_Skip_Spaces( parser );
/* initialize subrs array -- with synthetic fonts it is possible */
/* we get here twice */
if ( !loader->num_subrs )
{
error = psaux->ps_table_funcs->init( table, num_subrs, memory );
if ( error )
goto Fail;
}
/* the format is simple: */
/* */
/* `index' + binary data */
/* */
for (;;)
{
FT_Long idx, size;
FT_Byte* base;
/* If we are out of data, or if the next token isn't `dup', */
/* we are done. */
if ( parser->root.cursor + 4 >= parser->root.limit ||
ft_strncmp( (char*)parser->root.cursor, "dup", 3 ) != 0 )
break;
/* `dup' */
T1_Skip_PS_Token( parser );
idx = T1_ToInt( parser );
if ( !read_binary_data( parser, &size, &base, IS_INCREMENTAL ) )
return;
/* The binary string is followed by one token, e.g. `NP' */
/* (bound to `noaccess put') or by two separate tokens: */
/* `noaccess' & `put'. We position the parser right */
/* before the next `dup', if any. */
/* `NP' or `|' or `noaccess' */
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
T1_Skip_Spaces ( parser );
if ( parser->root.cursor + 4 < parser->root.limit &&
ft_strncmp( (char*)parser->root.cursor, "put", 3 ) == 0 )
{
/* skip `put' */
T1_Skip_PS_Token( parser );
T1_Skip_Spaces ( parser );
}
/* with synthetic fonts it is possible we get here twice */
if ( loader->num_subrs )
continue;
/* some fonts use a value of -1 for lenIV to indicate that */
/* the charstrings are unencoded */
/* */
/* thanks to Tom Kacvinsky for pointing this out */
/* */
if ( face->type1.private_dict.lenIV >= 0 )
{
FT_Byte* temp;
/* some fonts define empty subr records -- this is not totally */
/* compliant to the specification (which says they should at */
/* least contain a `return'), but we support them anyway */
if ( size < face->type1.private_dict.lenIV )
{
error = T1_Err_Invalid_File_Format;
goto Fail;
}
/* t1_decrypt() shouldn't write to base -- make temporary copy */
if ( FT_ALLOC( temp, size ) )
goto Fail;
FT_MEM_COPY( temp, base, size );
psaux->t1_decrypt( temp, size, 4330 );
size -= face->type1.private_dict.lenIV;
error = T1_Add_Table( table, (FT_Int)idx,
temp + face->type1.private_dict.lenIV, size );
FT_FREE( temp );
}
else
error = T1_Add_Table( table, (FT_Int)idx, base, size );
if ( error )
goto Fail;
}
if ( !loader->num_subrs )
loader->num_subrs = num_subrs;
return;
Fail:
parser->root.error = error;
}
#define TABLE_EXTEND 5
static void
parse_charstrings( T1_Face face,
T1_Loader loader )
{
T1_Parser parser = &loader->parser;
PS_Table code_table = &loader->charstrings;
PS_Table name_table = &loader->glyph_names;
PS_Table swap_table = &loader->swap_table;
FT_Memory memory = parser->root.memory;
FT_Error error;
PSAux_Service psaux = (PSAux_Service)face->psaux;
FT_Byte* cur;
FT_Byte* limit = parser->root.limit;
FT_Int n, num_glyphs;
FT_UInt notdef_index = 0;
FT_Byte notdef_found = 0;
num_glyphs = (FT_Int)T1_ToInt( parser );
if ( num_glyphs < 0 )
{
error = T1_Err_Invalid_File_Format;
goto Fail;
}
/* some fonts like Optima-Oblique not only define the /CharStrings */
/* array but access it also */
if ( num_glyphs == 0 || parser->root.error )
return;
/* initialize tables, leaving space for addition of .notdef, */
/* if necessary, and a few other glyphs to handle buggy */
/* fonts which have more glyphs than specified. */
/* for some non-standard fonts like `Optima' which provides */
/* different outlines depending on the resolution it is */
/* possible to get here twice */
if ( !loader->num_glyphs )
{
error = psaux->ps_table_funcs->init(
code_table, num_glyphs + 1 + TABLE_EXTEND, memory );
if ( error )
goto Fail;
error = psaux->ps_table_funcs->init(
name_table, num_glyphs + 1 + TABLE_EXTEND, memory );
if ( error )
goto Fail;
/* Initialize table for swapping index notdef_index and */
/* index 0 names and codes (if necessary). */
error = psaux->ps_table_funcs->init( swap_table, 4, memory );
if ( error )
goto Fail;
}
n = 0;
for (;;)
{
FT_Long size;
FT_Byte* base;
/* the format is simple: */
/* `/glyphname' + binary data */
T1_Skip_Spaces( parser );
cur = parser->root.cursor;
if ( cur >= limit )
break;
/* we stop when we find a `def' or `end' keyword */
if ( cur + 3 < limit && IS_PS_DELIM( cur[3] ) )
{
if ( cur[0] == 'd' &&
cur[1] == 'e' &&
cur[2] == 'f' )
{
/* There are fonts which have this: */
/* */
/* /CharStrings 118 dict def */
/* Private begin */
/* CharStrings begin */
/* ... */
/* */
/* To catch this we ignore `def' if */
/* no charstring has actually been */
/* seen. */
if ( n )
break;
}
if ( cur[0] == 'e' &&
cur[1] == 'n' &&
cur[2] == 'd' )
break;
}
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
if ( *cur == '/' )
{
FT_PtrDist len;
if ( cur + 1 >= limit )
{
error = T1_Err_Invalid_File_Format;
goto Fail;
}
/* skip `/' */
cur++;
len = parser->root.cursor - cur;
if ( !read_binary_data( parser, &size, &base, IS_INCREMENTAL ) )
return;
/* for some non-standard fonts like `Optima' which provides */
/* different outlines depending on the resolution it is */
/* possible to get here twice */
if ( loader->num_glyphs )
continue;
error = T1_Add_Table( name_table, n, cur, len + 1 );
if ( error )
goto Fail;
/* add a trailing zero to the name table */
name_table->elements[n][len] = '\0';
/* record index of /.notdef */
if ( *cur == '.' &&
ft_strcmp( ".notdef",
(const char*)(name_table->elements[n]) ) == 0 )
{
notdef_index = n;
notdef_found = 1;
}
if ( face->type1.private_dict.lenIV >= 0 &&
n < num_glyphs + TABLE_EXTEND )
{
FT_Byte* temp = NULL;
if ( size <= face->type1.private_dict.lenIV )
{
error = T1_Err_Invalid_File_Format;
goto Fail;
}
/* t1_decrypt() shouldn't write to base -- make temporary copy */
if ( FT_ALLOC( temp, size ) )
goto Fail;
FT_MEM_COPY( temp, base, size );
psaux->t1_decrypt( temp, size, 4330 );
size -= face->type1.private_dict.lenIV;
error = T1_Add_Table( code_table, n,
temp + face->type1.private_dict.lenIV, size );
FT_FREE( temp );
}
else
error = T1_Add_Table( code_table, n, base, size );
if ( error )
goto Fail;
n++;
}
}
loader->num_glyphs = n;
/* if /.notdef is found but does not occupy index 0, do our magic. */
if ( notdef_found &&
ft_strcmp( ".notdef", (const char*)name_table->elements[0] ) )
{
/* Swap glyph in index 0 with /.notdef glyph. First, add index 0 */
/* name and code entries to swap_table. Then place notdef_index */
/* name and code entries into swap_table. Then swap name and code */
/* entries at indices notdef_index and 0 using values stored in */
/* swap_table. */
/* Index 0 name */
error = T1_Add_Table( swap_table, 0,
name_table->elements[0],
name_table->lengths [0] );
if ( error )
goto Fail;
/* Index 0 code */
error = T1_Add_Table( swap_table, 1,
code_table->elements[0],
code_table->lengths [0] );
if ( error )
goto Fail;
/* Index notdef_index name */
error = T1_Add_Table( swap_table, 2,
name_table->elements[notdef_index],
name_table->lengths [notdef_index] );
if ( error )
goto Fail;
/* Index notdef_index code */
error = T1_Add_Table( swap_table, 3,
code_table->elements[notdef_index],
code_table->lengths [notdef_index] );
if ( error )
goto Fail;
error = T1_Add_Table( name_table, notdef_index,
swap_table->elements[0],
swap_table->lengths [0] );
if ( error )
goto Fail;
error = T1_Add_Table( code_table, notdef_index,
swap_table->elements[1],
swap_table->lengths [1] );
if ( error )
goto Fail;
error = T1_Add_Table( name_table, 0,
swap_table->elements[2],
swap_table->lengths [2] );
if ( error )
goto Fail;
error = T1_Add_Table( code_table, 0,
swap_table->elements[3],
swap_table->lengths [3] );
if ( error )
goto Fail;
}
else if ( !notdef_found )
{
/* notdef_index is already 0, or /.notdef is undefined in */
/* charstrings dictionary. Worry about /.notdef undefined. */
/* We take index 0 and add it to the end of the table(s) */
/* and add our own /.notdef glyph to index 0. */
/* 0 333 hsbw endchar */
FT_Byte notdef_glyph[] = { 0x8B, 0xF7, 0xE1, 0x0D, 0x0E };
char* notdef_name = (char *)".notdef";
error = T1_Add_Table( swap_table, 0,
name_table->elements[0],
name_table->lengths [0] );
if ( error )
goto Fail;
error = T1_Add_Table( swap_table, 1,
code_table->elements[0],
code_table->lengths [0] );
if ( error )
goto Fail;
error = T1_Add_Table( name_table, 0, notdef_name, 8 );
if ( error )
goto Fail;
error = T1_Add_Table( code_table, 0, notdef_glyph, 5 );
if ( error )
goto Fail;
error = T1_Add_Table( name_table, n,
swap_table->elements[0],
swap_table->lengths [0] );
if ( error )
goto Fail;
error = T1_Add_Table( code_table, n,
swap_table->elements[1],
swap_table->lengths [1] );
if ( error )
goto Fail;
/* we added a glyph. */
loader->num_glyphs += 1;
}
return;
Fail:
parser->root.error = error;
}
/*************************************************************************/
/* */
/* Define the token field static variables. This is a set of */
/* T1_FieldRec variables. */
/* */
/*************************************************************************/
static
const T1_FieldRec t1_keywords[] =
{
/***************************************************************************/
/* */
/* t1tokens.h */
/* */
/* Type 1 tokenizer (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2006, 2008, 2009 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#undef FT_STRUCTURE
#define FT_STRUCTURE PS_FontInfoRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FONT_INFO
T1_FIELD_STRING( "version", version,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_STRING( "Notice", notice,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_STRING( "FullName", full_name,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_STRING( "FamilyName", family_name,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_STRING( "Weight", weight,
T1_FIELD_DICT_FONTDICT )
/* we use pointers to detect modifications made by synthetic fonts */
T1_FIELD_NUM ( "ItalicAngle", italic_angle,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_BOOL ( "isFixedPitch", is_fixed_pitch,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_NUM ( "UnderlinePosition", underline_position,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_NUM ( "UnderlineThickness", underline_thickness,
T1_FIELD_DICT_FONTDICT )
#undef FT_STRUCTURE
#define FT_STRUCTURE PS_FontExtraRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FONT_EXTRA
T1_FIELD_NUM ( "FSType", fs_type,
T1_FIELD_DICT_FONTDICT )
#undef FT_STRUCTURE
#define FT_STRUCTURE PS_PrivateRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_PRIVATE
T1_FIELD_NUM ( "UniqueID", unique_id,
T1_FIELD_DICT_FONTDICT | T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM ( "lenIV", lenIV,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM ( "LanguageGroup", language_group,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM ( "password", password,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_FIXED_1000( "BlueScale", blue_scale,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM ( "BlueShift", blue_shift,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM ( "BlueFuzz", blue_fuzz,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM_TABLE ( "BlueValues", blue_values, 14,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM_TABLE ( "OtherBlues", other_blues, 10,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM_TABLE ( "FamilyBlues", family_blues, 14,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM_TABLE ( "FamilyOtherBlues", family_other_blues, 10,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM_TABLE2( "StdHW", standard_width, 1,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM_TABLE2( "StdVW", standard_height, 1,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM_TABLE2( "MinFeature", min_feature, 2,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM_TABLE ( "StemSnapH", snap_widths, 12,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM_TABLE ( "StemSnapV", snap_heights, 12,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_FIXED ( "ExpansionFactor", expansion_factor,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_BOOL ( "ForceBold", force_bold,
T1_FIELD_DICT_PRIVATE )
#undef FT_STRUCTURE
#define FT_STRUCTURE T1_FontRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FONT_DICT
T1_FIELD_KEY ( "FontName", font_name, T1_FIELD_DICT_FONTDICT )
T1_FIELD_NUM ( "PaintType", paint_type, T1_FIELD_DICT_FONTDICT )
T1_FIELD_NUM ( "FontType", font_type, T1_FIELD_DICT_FONTDICT )
T1_FIELD_FIXED( "StrokeWidth", stroke_width, T1_FIELD_DICT_FONTDICT )
#undef FT_STRUCTURE
#define FT_STRUCTURE FT_BBox
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_BBOX
T1_FIELD_BBOX( "FontBBox", xMin, T1_FIELD_DICT_FONTDICT )
#undef FT_STRUCTURE
#define FT_STRUCTURE T1_FaceRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FACE
T1_FIELD_NUM( "NDV", ndv_idx, T1_FIELD_DICT_PRIVATE )
T1_FIELD_NUM( "CDV", cdv_idx, T1_FIELD_DICT_PRIVATE )
#undef FT_STRUCTURE
#define FT_STRUCTURE PS_BlendRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_BLEND
T1_FIELD_NUM_TABLE( "DesignVector", default_design_vector,
T1_MAX_MM_DESIGNS, T1_FIELD_DICT_FONTDICT )
/* END */
/* now add the special functions... */
T1_FIELD_CALLBACK( "FontMatrix", t1_parse_font_matrix,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_CALLBACK( "Encoding", parse_encoding,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_CALLBACK( "Subrs", parse_subrs,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_CALLBACK( "CharStrings", parse_charstrings,
T1_FIELD_DICT_PRIVATE )
T1_FIELD_CALLBACK( "Private", parse_private,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_CALLBACK( "BlendDesignPositions", parse_blend_design_positions,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_CALLBACK( "BlendDesignMap", parse_blend_design_map,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_CALLBACK( "BlendAxisTypes", parse_blend_axis_types,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_CALLBACK( "WeightVector", parse_weight_vector,
T1_FIELD_DICT_FONTDICT )
T1_FIELD_CALLBACK( "BuildCharArray", parse_buildchar,
T1_FIELD_DICT_PRIVATE )
{ 0, T1_FIELD_LOCATION_CID_INFO, T1_FIELD_TYPE_NONE, 0, 0, 0, 0, 0, 0 }
};
#define T1_FIELD_COUNT \
( sizeof ( t1_keywords ) / sizeof ( t1_keywords[0] ) )
static FT_Error
parse_dict( T1_Face face,
T1_Loader loader,
FT_Byte* base,
FT_Long size )
{
T1_Parser parser = &loader->parser;
FT_Byte *limit, *start_binary = NULL;
FT_Bool have_integer = 0;
parser->root.cursor = base;
parser->root.limit = base + size;
parser->root.error = T1_Err_Ok;
limit = parser->root.limit;
T1_Skip_Spaces( parser );
while ( parser->root.cursor < limit )
{
FT_Byte* cur;
cur = parser->root.cursor;
/* look for `eexec' */
if ( IS_PS_TOKEN( cur, limit, "eexec" ) )
break;
/* look for `closefile' which ends the eexec section */
else if ( IS_PS_TOKEN( cur, limit, "closefile" ) )
break;
/* in a synthetic font the base font starts after a */
/* `FontDictionary' token that is placed after a Private dict */
else if ( IS_PS_TOKEN( cur, limit, "FontDirectory" ) )
{
if ( loader->keywords_encountered & T1_PRIVATE )
loader->keywords_encountered |=
T1_FONTDIR_AFTER_PRIVATE;
parser->root.cursor += 13;
}
/* check whether we have an integer */
else if ( ft_isdigit( *cur ) )
{
start_binary = cur;
T1_Skip_PS_Token( parser );
if ( parser->root.error )
goto Exit;
have_integer = 1;
}
/* in valid Type 1 fonts we don't see `RD' or `-|' directly */
/* since those tokens are handled by parse_subrs and */
/* parse_charstrings */
else if ( *cur == 'R' && cur + 6 < limit && *(cur + 1) == 'D' &&
have_integer )
{
FT_Long s;
FT_Byte* b;
parser->root.cursor = start_binary;
if ( !read_binary_data( parser, &s, &b, IS_INCREMENTAL ) )
return T1_Err_Invalid_File_Format;
have_integer = 0;
}
else if ( *cur == '-' && cur + 6 < limit && *(cur + 1) == '|' &&
have_integer )
{
FT_Long s;
FT_Byte* b;
parser->root.cursor = start_binary;
if ( !read_binary_data( parser, &s, &b, IS_INCREMENTAL ) )
return T1_Err_Invalid_File_Format;
have_integer = 0;
}
/* look for immediates */
else if ( *cur == '/' && cur + 2 < limit )
{
FT_PtrDist len;
cur++;
parser->root.cursor = cur;
T1_Skip_PS_Token( parser );
if ( parser->root.error )
goto Exit;
len = parser->root.cursor - cur;
if ( len > 0 && len < 22 && parser->root.cursor < limit )
{
/* now compare the immediate name to the keyword table */
T1_Field keyword = (T1_Field)t1_keywords;
for (;;)
{
FT_Byte* name;
name = (FT_Byte*)keyword->ident;
if ( !name )
break;
if ( cur[0] == name[0] &&
len == (FT_PtrDist)ft_strlen( (const char *)name ) &&
ft_memcmp( cur, name, len ) == 0 )
{
/* We found it -- run the parsing callback! */
/* We record every instance of every field */
/* (until we reach the base font of a */
/* synthetic font) to deal adequately with */
/* multiple master fonts; this is also */
/* necessary because later PostScript */
/* definitions override earlier ones. */
/* Once we encounter `FontDirectory' after */
/* `/Private', we know that this is a synthetic */
/* font; except for `/CharStrings' we are not */
/* interested in anything that follows this */
/* `FontDirectory'. */
/* MM fonts have more than one /Private token at */
/* the top level; let's hope that all the junk */
/* that follows the first /Private token is not */
/* interesting to us. */
/* According to Adobe Tech Note #5175 (CID-Keyed */
/* Font Installation for ATM Software) a `begin' */
/* must be followed by exactly one `end', and */
/* `begin' -- `end' pairs must be accurately */
/* paired. We could use this to distinguish */
/* between the global Private and the Private */
/* dict that is a member of the Blend dict. */
const FT_UInt dict =
( loader->keywords_encountered & T1_PRIVATE )
? T1_FIELD_DICT_PRIVATE
: T1_FIELD_DICT_FONTDICT;
if ( !( dict & keyword->dict ) )
{
FT_TRACE1(( "parse_dict: found `%s' but ignoring it"
" since it is in the wrong dictionary\n",
keyword->ident ));
break;
}
if ( !( loader->keywords_encountered &
T1_FONTDIR_AFTER_PRIVATE ) ||
ft_strcmp( (const char*)name, "CharStrings" ) == 0 )
{
parser->root.error = t1_load_keyword( face,
loader,
keyword );
if ( parser->root.error != T1_Err_Ok )
{
if ( FT_ERROR_BASE( parser->root.error ) == FT_Err_Ignore )
parser->root.error = T1_Err_Ok;
else
return parser->root.error;
}
}
break;
}
keyword++;
}
}
have_integer = 0;
}
else
{
T1_Skip_PS_Token( parser );
if ( parser->root.error )
goto Exit;
have_integer = 0;
}
T1_Skip_Spaces( parser );
}
Exit:
return parser->root.error;
}
static void
t1_init_loader( T1_Loader loader,
T1_Face face )
{
FT_UNUSED( face );
FT_MEM_ZERO( loader, sizeof ( *loader ) );
loader->num_glyphs = 0;
loader->num_chars = 0;
/* initialize the tables -- simply set their `init' field to 0 */
loader->encoding_table.init = 0;
loader->charstrings.init = 0;
loader->glyph_names.init = 0;
loader->subrs.init = 0;
loader->swap_table.init = 0;
loader->fontdata = 0;
loader->keywords_encountered = 0;
}
static void
t1_done_loader( T1_Loader loader )
{
T1_Parser parser = &loader->parser;
/* finalize tables */
T1_Release_Table( &loader->encoding_table );
T1_Release_Table( &loader->charstrings );
T1_Release_Table( &loader->glyph_names );
T1_Release_Table( &loader->swap_table );
T1_Release_Table( &loader->subrs );
/* finalize parser */
T1_Finalize_Parser( parser );
}
FT_LOCAL_DEF( FT_Error )
T1_Open_Face( T1_Face face )
{
T1_LoaderRec loader;
T1_Parser parser;
T1_Font type1 = &face->type1;
PS_Private priv = &type1->private_dict;
FT_Error error;
PSAux_Service psaux = (PSAux_Service)face->psaux;
t1_init_loader( &loader, face );
/* default values */
face->ndv_idx = -1;
face->cdv_idx = -1;
face->len_buildchar = 0;
priv->blue_shift = 7;
priv->blue_fuzz = 1;
priv->lenIV = 4;
priv->expansion_factor = (FT_Fixed)( 0.06 * 0x10000L );
priv->blue_scale = (FT_Fixed)( 0.039625 * 0x10000L * 1000 );
parser = &loader.parser;
error = T1_New_Parser( parser,
face->root.stream,
face->root.memory,
psaux );
if ( error )
goto Exit;
error = parse_dict( face, &loader,
parser->base_dict, parser->base_len );
if ( error )
goto Exit;
error = T1_Get_Private_Dict( parser, psaux );
if ( error )
goto Exit;
error = parse_dict( face, &loader,
parser->private_dict, parser->private_len );
if ( error )
goto Exit;
/* ensure even-ness of `num_blue_values' */
priv->num_blue_values &= ~1;
if ( face->blend &&
face->blend->num_default_design_vector != 0 &&
face->blend->num_default_design_vector != face->blend->num_axis )
{
/* we don't use it currently so just warn, reset, and ignore */
FT_ERROR(( "T1_Open_Face(): /DesignVector contains %u entries "
"while there are %u axes.\n",
face->blend->num_default_design_vector,
face->blend->num_axis ));
face->blend->num_default_design_vector = 0;
}
/* the following can happen for MM instances; we then treat the */
/* font as a normal PS font */
if ( face->blend &&
( !face->blend->num_designs || !face->blend->num_axis ) )
T1_Done_Blend( face );
/* another safety check */
if ( face->blend )
{
FT_UInt i;
for ( i = 0; i < face->blend->num_axis; i++ )
if ( !face->blend->design_map[i].num_points )
{
T1_Done_Blend( face );
break;
}
}
if ( face->blend )
{
if ( face->len_buildchar > 0 )
{
FT_Memory memory = face->root.memory;
if ( FT_NEW_ARRAY( face->buildchar, face->len_buildchar ) )
{
FT_ERROR(( "T1_Open_Face: cannot allocate BuildCharArray\n" ));
face->len_buildchar = 0;
goto Exit;
}
}
}
else
face->len_buildchar = 0;
/* now, propagate the subrs, charstrings, and glyphnames tables */
/* to the Type1 data */
type1->num_glyphs = loader.num_glyphs;
if ( loader.subrs.init )
{
loader.subrs.init = 0;
type1->num_subrs = loader.num_subrs;
type1->subrs_block = loader.subrs.block;
type1->subrs = loader.subrs.elements;
type1->subrs_len = loader.subrs.lengths;
}
if ( !IS_INCREMENTAL )
if ( !loader.charstrings.init )
{
FT_ERROR(( "T1_Open_Face: no `/CharStrings' array in face\n" ));
error = T1_Err_Invalid_File_Format;
}
loader.charstrings.init = 0;
type1->charstrings_block = loader.charstrings.block;
type1->charstrings = loader.charstrings.elements;
type1->charstrings_len = loader.charstrings.lengths;
/* we copy the glyph names `block' and `elements' fields; */
/* the `lengths' field must be released later */
type1->glyph_names_block = loader.glyph_names.block;
type1->glyph_names = (FT_String**)loader.glyph_names.elements;
loader.glyph_names.block = 0;
loader.glyph_names.elements = 0;
/* we must now build type1.encoding when we have a custom array */
if ( type1->encoding_type == T1_ENCODING_TYPE_ARRAY )
{
FT_Int charcode, idx, min_char, max_char;
FT_Byte* char_name;
FT_Byte* glyph_name;
/* OK, we do the following: for each element in the encoding */
/* table, look up the index of the glyph having the same name */
/* the index is then stored in type1.encoding.char_index, and */
/* the name to type1.encoding.char_name */
min_char = 0;
max_char = 0;
charcode = 0;
for ( ; charcode < loader.encoding_table.max_elems; charcode++ )
{
type1->encoding.char_index[charcode] = 0;
type1->encoding.char_name [charcode] = (char *)".notdef";
char_name = loader.encoding_table.elements[charcode];
if ( char_name )
for ( idx = 0; idx < type1->num_glyphs; idx++ )
{
glyph_name = (FT_Byte*)type1->glyph_names[idx];
if ( ft_strcmp( (const char*)char_name,
(const char*)glyph_name ) == 0 )
{
type1->encoding.char_index[charcode] = (FT_UShort)idx;
type1->encoding.char_name [charcode] = (char*)glyph_name;
/* Change min/max encoded char only if glyph name is */
/* not /.notdef */
if ( ft_strcmp( (const char*)".notdef",
(const char*)glyph_name ) != 0 )
{
if ( charcode < min_char )
min_char = charcode;
if ( charcode >= max_char )
max_char = charcode + 1;
}
break;
}
}
}
type1->encoding.code_first = min_char;
type1->encoding.code_last = max_char;
type1->encoding.num_chars = loader.num_chars;
}
Exit:
t1_done_loader( &loader );
return error;
}
/* END */
/***************************************************************************/
/* */
/* t1objs.c */
/* */
/* Type 1 objects manager (body). */
/* */
/* Copyright 1996-2009, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* t1gload.h */
/* */
/* Type 1 Glyph Loader (specification). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2008, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1GLOAD_H__
/***************************************************************************/
/* */
/* t1objs.h */
/* */
/* Type 1 objects manager (specification). */
/* */
/* Copyright 1996-2001, 2002, 2006, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1OBJS_H__
FT_BEGIN_HEADER
/* The following structures must be defined by the hinter */
typedef struct T1_Size_Hints_ T1_Size_Hints;
typedef struct T1_Glyph_Hints_ T1_Glyph_Hints;
/*************************************************************************/
/* */
/* <Type> */
/* T1_Size */
/* */
/* <Description> */
/* A handle to a Type 1 size object. */
/* */
typedef struct T1_SizeRec_* T1_Size;
/*************************************************************************/
/* */
/* <Type> */
/* T1_GlyphSlot */
/* */
/* <Description> */
/* A handle to a Type 1 glyph slot object. */
/* */
typedef struct T1_GlyphSlotRec_* T1_GlyphSlot;
/*************************************************************************/
/* */
/* <Type> */
/* T1_CharMap */
/* */
/* <Description> */
/* A handle to a Type 1 character mapping object. */
/* */
/* <Note> */
/* The Type 1 format doesn't use a charmap but an encoding table. */
/* The driver is responsible for making up charmap objects */
/* corresponding to these tables. */
/* */
typedef struct T1_CharMapRec_* T1_CharMap;
/*************************************************************************/
/* */
/* HERE BEGINS THE TYPE1 SPECIFIC STUFF */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Type> */
/* T1_SizeRec */
/* */
/* <Description> */
/* Type 1 size record. */
/* */
typedef struct T1_SizeRec_
{
FT_SizeRec root;
} T1_SizeRec;
FT_LOCAL( void )
T1_Size_Done( FT_Size size );
FT_LOCAL( FT_Error )
T1_Size_Request( FT_Size size,
FT_Size_Request req );
FT_LOCAL( FT_Error )
T1_Size_Init( FT_Size size );
/*************************************************************************/
/* */
/* <Type> */
/* T1_GlyphSlotRec */
/* */
/* <Description> */
/* Type 1 glyph slot record. */
/* */
typedef struct T1_GlyphSlotRec_
{
FT_GlyphSlotRec root;
FT_Bool hint;
FT_Bool scaled;
FT_Int max_points;
FT_Int max_contours;
FT_Fixed x_scale;
FT_Fixed y_scale;
} T1_GlyphSlotRec;
FT_LOCAL( FT_Error )
T1_Face_Init( FT_Stream stream,
FT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
FT_LOCAL( void )
T1_Face_Done( FT_Face face );
FT_LOCAL( FT_Error )
T1_GlyphSlot_Init( FT_GlyphSlot slot );
FT_LOCAL( void )
T1_GlyphSlot_Done( FT_GlyphSlot slot );
FT_LOCAL( FT_Error )
T1_Driver_Init( FT_Module driver );
FT_LOCAL( void )
T1_Driver_Done( FT_Module driver );
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
T1_Compute_Max_Advance( T1_Face face,
FT_Pos* max_advance );
FT_LOCAL( FT_Error )
T1_Get_Advances( FT_Face face,
FT_UInt first,
FT_UInt count,
FT_Int32 load_flags,
FT_Fixed* advances );
FT_LOCAL( FT_Error )
T1_Load_Glyph( FT_GlyphSlot glyph,
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags );
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* t1afm.h */
/* */
/* AFM support for Type 1 fonts (specification). */
/* */
/* Copyright 1996-2001, 2002, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1AFM_H__
FT_BEGIN_HEADER
FT_LOCAL( FT_Error )
T1_Read_Metrics( FT_Face face,
FT_Stream stream );
FT_LOCAL( void )
T1_Done_Metrics( FT_Memory memory,
AFM_FontInfo fi );
FT_LOCAL( void )
T1_Get_Kerning( AFM_FontInfo fi,
FT_UInt glyph1,
FT_UInt glyph2,
FT_Vector* kerning );
FT_LOCAL( FT_Error )
T1_Get_Track_Kerning( FT_Face face,
FT_Fixed ptsize,
FT_Int degree,
FT_Fixed* kerning );
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t1objs
/*************************************************************************/
/* */
/* SIZE FUNCTIONS */
/* */
/* note that we store the global hints in the size's "internal" root */
/* field */
/* */
/*************************************************************************/
static PSH_Globals_Funcs
T1_Size_Get_Globals_Funcs( T1_Size size )
{
T1_Face face = (T1_Face)size->root.face;
PSHinter_Service pshinter = (PSHinter_Service)face->pshinter;
FT_Module module;
module = FT_Get_Module( size->root.face->driver->root.library,
"pshinter" );
return ( module && pshinter && pshinter->get_globals_funcs )
? pshinter->get_globals_funcs( module )
: 0 ;
}
FT_LOCAL_DEF( void )
/* T1_Size */
T1_Size_Done( FT_Size t1size )
{
T1_Size size = (T1_Size)t1size;
if ( size->root.internal )
{
PSH_Globals_Funcs funcs;
funcs = T1_Size_Get_Globals_Funcs( size );
if ( funcs )
funcs->destroy( (PSH_Globals)size->root.internal );
size->root.internal = 0;
}
}
FT_LOCAL_DEF( FT_Error )
/* T1_Size */
T1_Size_Init( FT_Size t1size )
{
T1_Size size = (T1_Size)t1size;
FT_Error error = T1_Err_Ok;
PSH_Globals_Funcs funcs = T1_Size_Get_Globals_Funcs( size );
if ( funcs )
{
PSH_Globals globals;
T1_Face face = (T1_Face)size->root.face;
error = funcs->create( size->root.face->memory,
&face->type1.private_dict, &globals );
if ( !error )
size->root.internal = (FT_Size_Internal)(void*)globals;
}
return error;
}
FT_LOCAL_DEF( FT_Error )
/* T1_Size */
T1_Size_Request( FT_Size t1size,
FT_Size_Request req )
{
T1_Size size = (T1_Size)t1size;
PSH_Globals_Funcs funcs = T1_Size_Get_Globals_Funcs( size );
FT_Request_Metrics( size->root.face, req );
if ( funcs )
funcs->set_scale( (PSH_Globals)size->root.internal,
size->root.metrics.x_scale,
size->root.metrics.y_scale,
0, 0 );
return T1_Err_Ok;
}
/*************************************************************************/
/* */
/* SLOT FUNCTIONS */
/* */
/*************************************************************************/
FT_LOCAL_DEF( void )
T1_GlyphSlot_Done( FT_GlyphSlot slot )
{
slot->internal->glyph_hints = 0;
}
FT_LOCAL_DEF( FT_Error )
T1_GlyphSlot_Init( FT_GlyphSlot slot )
{
T1_Face face;
PSHinter_Service pshinter;
face = (T1_Face)slot->face;
pshinter = (PSHinter_Service)face->pshinter;
if ( pshinter )
{
FT_Module module;
module = FT_Get_Module( slot->face->driver->root.library,
"pshinter" );
if ( module )
{
T1_Hints_Funcs funcs;
funcs = pshinter->get_t1_funcs( module );
slot->internal->glyph_hints = (void*)funcs;
}
}
return 0;
}
/*************************************************************************/
/* */
/* FACE FUNCTIONS */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* T1_Face_Done */
/* */
/* <Description> */
/* The face object destructor. */
/* */
/* <Input> */
/* face :: A typeless pointer to the face object to destroy. */
/* */
FT_LOCAL_DEF( void )
/* T1_Face */
T1_Face_Done( FT_Face t1face )
{
T1_Face face = (T1_Face)t1face;
FT_Memory memory;
T1_Font type1;
if ( !face )
return;
memory = face->root.memory;
type1 = &face->type1;
/* release multiple masters information */
FT_ASSERT( ( face->len_buildchar == 0 ) == ( face->buildchar == NULL ) );
if ( face->buildchar )
{
FT_FREE( face->buildchar );
face->buildchar = NULL;
face->len_buildchar = 0;
}
T1_Done_Blend( face );
face->blend = 0;
/* release font info strings */
{
PS_FontInfo info = &type1->font_info;
FT_FREE( info->version );
FT_FREE( info->notice );
FT_FREE( info->full_name );
FT_FREE( info->family_name );
FT_FREE( info->weight );
}
/* release top dictionary */
FT_FREE( type1->charstrings_len );
FT_FREE( type1->charstrings );
FT_FREE( type1->glyph_names );
FT_FREE( type1->subrs );
FT_FREE( type1->subrs_len );
FT_FREE( type1->subrs_block );
FT_FREE( type1->charstrings_block );
FT_FREE( type1->glyph_names_block );
FT_FREE( type1->encoding.char_index );
FT_FREE( type1->encoding.char_name );
FT_FREE( type1->font_name );
/* release afm data if present */
if ( face->afm_data )
T1_Done_Metrics( memory, (AFM_FontInfo)face->afm_data );
/* release unicode map, if any */
#if 0
FT_FREE( face->unicode_map_rec.maps );
face->unicode_map_rec.num_maps = 0;
face->unicode_map = NULL;
#endif
face->root.family_name = NULL;
face->root.style_name = NULL;
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_Face_Init */
/* */
/* <Description> */
/* The face object constructor. */
/* */
/* <Input> */
/* stream :: input stream where to load font data. */
/* */
/* face_index :: The index of the font face in the resource. */
/* */
/* num_params :: Number of additional generic parameters. Ignored. */
/* */
/* params :: Additional generic parameters. Ignored. */
/* */
/* <InOut> */
/* face :: The face record to build. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
T1_Face_Init( FT_Stream stream,
/* T1_Face */
FT_Face t1face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
T1_Face face = (T1_Face)t1face;
FT_Error error;
FT_Service_PsCMaps psnames;
PSAux_Service psaux;
T1_Font type1 = &face->type1;
PS_FontInfo info = &type1->font_info;
FT_UNUSED( num_params );
FT_UNUSED( params );
FT_UNUSED( stream );
face->root.num_faces = 1;
FT_FACE_FIND_GLOBAL_SERVICE( face, psnames, POSTSCRIPT_CMAPS );
face->psnames = psnames;
face->psaux = FT_Get_Module_Interface( FT_FACE_LIBRARY( face ),
"psaux" );
psaux = (PSAux_Service)face->psaux;
if ( !psaux )
{
FT_ERROR(( "T1_Face_Init: cannot access `psaux' module\n" ));
error = T1_Err_Missing_Module;
goto Exit;
}
face->pshinter = FT_Get_Module_Interface( FT_FACE_LIBRARY( face ),
"pshinter" );
FT_TRACE2(( "Type 1 driver\n" ));
/* open the tokenizer; this will also check the font format */
error = T1_Open_Face( face );
if ( error )
goto Exit;
/* if we just wanted to check the format, leave successfully now */
if ( face_index < 0 )
goto Exit;
/* check the face index */
if ( face_index > 0 )
{
FT_ERROR(( "T1_Face_Init: invalid face index\n" ));
error = T1_Err_Invalid_Argument;
goto Exit;
}
/* now load the font program into the face object */
/* initialize the face object fields */
/* set up root face fields */
{
FT_Face root = (FT_Face)&face->root;
root->num_glyphs = type1->num_glyphs;
root->face_index = 0;
root->face_flags = FT_FACE_FLAG_SCALABLE |
FT_FACE_FLAG_HORIZONTAL |
FT_FACE_FLAG_GLYPH_NAMES |
FT_FACE_FLAG_HINTER;
if ( info->is_fixed_pitch )
root->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;
if ( face->blend )
root->face_flags |= FT_FACE_FLAG_MULTIPLE_MASTERS;
/* XXX: TODO -- add kerning with .afm support */
/* The following code to extract the family and the style is very */
/* simplistic and might get some things wrong. For a full-featured */
/* algorithm you might have a look at the whitepaper given at */
/* */
/* http://blogs.msdn.com/text/archive/2007/04/23/wpf-font-selection-model.aspx */
/* get style name -- be careful, some broken fonts only */
/* have a `/FontName' dictionary entry! */
root->family_name = info->family_name;
root->style_name = NULL;
if ( root->family_name )
{
char* full = info->full_name;
char* family = root->family_name;
if ( full )
{
FT_Bool the_same = TRUE;
while ( *full )
{
if ( *full == *family )
{
family++;
full++;
}
else
{
if ( *full == ' ' || *full == '-' )
full++;
else if ( *family == ' ' || *family == '-' )
family++;
else
{
the_same = FALSE;
if ( !*family )
root->style_name = full;
break;
}
}
}
if ( the_same )
root->style_name = (char *)"Regular";
}
}
else
{
/* do we have a `/FontName'? */
if ( type1->font_name )
root->family_name = type1->font_name;
}
if ( !root->style_name )
{
if ( info->weight )
root->style_name = info->weight;
else
/* assume `Regular' style because we don't know better */
root->style_name = (char *)"Regular";
}
/* compute style flags */
root->style_flags = 0;
if ( info->italic_angle )
root->style_flags |= FT_STYLE_FLAG_ITALIC;
if ( info->weight )
{
if ( !ft_strcmp( info->weight, "Bold" ) ||
!ft_strcmp( info->weight, "Black" ) )
root->style_flags |= FT_STYLE_FLAG_BOLD;
}
/* no embedded bitmap support */
root->num_fixed_sizes = 0;
root->available_sizes = 0;
root->bbox.xMin = type1->font_bbox.xMin >> 16;
root->bbox.yMin = type1->font_bbox.yMin >> 16;
/* no `U' suffix here to 0xFFFF! */
root->bbox.xMax = ( type1->font_bbox.xMax + 0xFFFF ) >> 16;
root->bbox.yMax = ( type1->font_bbox.yMax + 0xFFFF ) >> 16;
/* Set units_per_EM if we didn't set it in t1_parse_font_matrix. */
if ( !root->units_per_EM )
root->units_per_EM = 1000;
root->ascender = (FT_Short)( root->bbox.yMax );
root->descender = (FT_Short)( root->bbox.yMin );
root->height = (FT_Short)( ( root->units_per_EM * 12 ) / 10 );
if ( root->height < root->ascender - root->descender )
root->height = (FT_Short)( root->ascender - root->descender );
/* now compute the maximum advance width */
root->max_advance_width =
(FT_Short)( root->bbox.xMax );
{
FT_Pos max_advance;
error = T1_Compute_Max_Advance( face, &max_advance );
/* in case of error, keep the standard width */
if ( !error )
root->max_advance_width = (FT_Short)FIXED_TO_INT( max_advance );
else
/* clear error */
error = T1_Err_Ok;
}
root->max_advance_height = root->height;
root->underline_position = (FT_Short)info->underline_position;
root->underline_thickness = (FT_Short)info->underline_thickness;
}
{
FT_Face root = &face->root;
if ( psnames )
{
FT_CharMapRec charmap;
T1_CMap_Classes cmap_classes = psaux->t1_cmap_classes;
FT_CMap_Class clazz;
charmap.face = root;
/* first of all, try to synthesize a Unicode charmap */
charmap.platform_id = TT_PLATFORM_MICROSOFT;
charmap.encoding_id = TT_MS_ID_UNICODE_CS;
charmap.encoding = FT_ENCODING_UNICODE;
error = FT_CMap_New( cmap_classes->unicode, NULL, &charmap, NULL );
if ( error && FT_Err_No_Unicode_Glyph_Name != error )
goto Exit;
error = FT_Err_Ok;
/* now, generate an Adobe Standard encoding when appropriate */
charmap.platform_id = TT_PLATFORM_ADOBE;
clazz = NULL;
switch ( type1->encoding_type )
{
case T1_ENCODING_TYPE_STANDARD:
charmap.encoding = FT_ENCODING_ADOBE_STANDARD;
charmap.encoding_id = TT_ADOBE_ID_STANDARD;
clazz = cmap_classes->standard;
break;
case T1_ENCODING_TYPE_EXPERT:
charmap.encoding = FT_ENCODING_ADOBE_EXPERT;
charmap.encoding_id = TT_ADOBE_ID_EXPERT;
clazz = cmap_classes->expert;
break;
case T1_ENCODING_TYPE_ARRAY:
charmap.encoding = FT_ENCODING_ADOBE_CUSTOM;
charmap.encoding_id = TT_ADOBE_ID_CUSTOM;
clazz = cmap_classes->custom;
break;
case T1_ENCODING_TYPE_ISOLATIN1:
charmap.encoding = FT_ENCODING_ADOBE_LATIN_1;
charmap.encoding_id = TT_ADOBE_ID_LATIN_1;
clazz = cmap_classes->unicode;
break;
default:
;
}
if ( clazz )
error = FT_CMap_New( clazz, NULL, &charmap, NULL );
#if 0
/* Select default charmap */
if (root->num_charmaps)
root->charmap = root->charmaps[0];
#endif
}
}
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_Driver_Init */
/* */
/* <Description> */
/* Initializes a given Type 1 driver object. */
/* */
/* <Input> */
/* driver :: A handle to the target driver object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
T1_Driver_Init( FT_Module driver )
{
FT_UNUSED( driver );
return T1_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_Driver_Done */
/* */
/* <Description> */
/* Finalizes a given Type 1 driver. */
/* */
/* <Input> */
/* driver :: A handle to the target Type 1 driver. */
/* */
FT_LOCAL_DEF( void )
T1_Driver_Done( FT_Module driver )
{
FT_UNUSED( driver );
}
/* END */
/***************************************************************************/
/* */
/* t1driver.c */
/* */
/* Type 1 driver interface (body). */
/* */
/* Copyright 1996-2004, 2006, 2007, 2009, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* t1driver.h */
/* */
/* High-level Type 1 driver interface (specification). */
/* */
/* Copyright 1996-2001, 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T1DRIVER_H__
FT_BEGIN_HEADER
FT_EXPORT_VAR( const FT_Driver_ClassRec ) t1_driver_class;
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t1driver
/*
* GLYPH DICT SERVICE
*
*/
static FT_Error
t1_get_glyph_name( T1_Face face,
FT_UInt glyph_index,
FT_Pointer buffer,
FT_UInt buffer_max )
{
FT_STRCPYN( buffer, face->type1.glyph_names[glyph_index], buffer_max );
return T1_Err_Ok;
}
static FT_UInt
t1_get_name_index( T1_Face face,
FT_String* glyph_name )
{
FT_Int i;
FT_String* gname;
for ( i = 0; i < face->type1.num_glyphs; i++ )
{
gname = face->type1.glyph_names[i];
if ( !ft_strcmp( glyph_name, gname ) )
return (FT_UInt)i;
}
return 0;
}
static const FT_Service_GlyphDictRec t1_service_glyph_dict =
{
(FT_GlyphDict_GetNameFunc) t1_get_glyph_name,
(FT_GlyphDict_NameIndexFunc)t1_get_name_index
};
/*
* POSTSCRIPT NAME SERVICE
*
*/
static const char*
t1_get_ps_name( T1_Face face )
{
return (const char*) face->type1.font_name;
}
static const FT_Service_PsFontNameRec t1_service_ps_name =
{
(FT_PsName_GetFunc)t1_get_ps_name
};
/*
* MULTIPLE MASTERS SERVICE
*
*/
static const FT_Service_MultiMastersRec t1_service_multi_masters =
{
(FT_Get_MM_Func) T1_Get_Multi_Master,
(FT_Set_MM_Design_Func) T1_Set_MM_Design,
(FT_Set_MM_Blend_Func) T1_Set_MM_Blend,
(FT_Get_MM_Var_Func) T1_Get_MM_Var,
(FT_Set_Var_Design_Func)T1_Set_Var_Design
};
/*
* POSTSCRIPT INFO SERVICE
*
*/
static FT_Error
t1_ps_get_font_info( FT_Face face,
PS_FontInfoRec* afont_info )
{
*afont_info = ((T1_Face)face)->type1.font_info;
return T1_Err_Ok;
}
static FT_Error
t1_ps_get_font_extra( FT_Face face,
PS_FontExtraRec* afont_extra )
{
*afont_extra = ((T1_Face)face)->type1.font_extra;
return T1_Err_Ok;
}
static FT_Int
t1_ps_has_glyph_names( FT_Face face )
{
FT_UNUSED( face );
return 1;
}
static FT_Error
t1_ps_get_font_private( FT_Face face,
PS_PrivateRec* afont_private )
{
*afont_private = ((T1_Face)face)->type1.private_dict;
return T1_Err_Ok;
}
static FT_Long
t1_ps_get_font_value( FT_Face face,
PS_Dict_Keys key,
FT_UInt idx,
void *value,
FT_Long value_len )
{
FT_Long retval = -1;
T1_Face t1face = (T1_Face)face;
T1_Font type1 = &t1face->type1;
switch ( key )
{
case PS_DICT_FONT_TYPE:
retval = sizeof ( type1->font_type );
if ( value && value_len >= retval )
*((FT_Byte *)value) = type1->font_type;
break;
case PS_DICT_FONT_MATRIX:
if ( idx < sizeof ( type1->font_matrix ) /
sizeof ( type1->font_matrix.xx ) )
{
FT_Fixed val = 0;
retval = sizeof ( val );
if ( value && value_len >= retval )
{
switch ( idx )
{
case 0:
val = type1->font_matrix.xx;
break;
case 1:
val = type1->font_matrix.xy;
break;
case 2:
val = type1->font_matrix.yx;
break;
case 3:
val = type1->font_matrix.yy;
break;
}
*((FT_Fixed *)value) = val;
}
}
break;
case PS_DICT_FONT_BBOX:
if ( idx < sizeof ( type1->font_bbox ) /
sizeof ( type1->font_bbox.xMin ) )
{
FT_Fixed val = 0;
retval = sizeof ( val );
if ( value && value_len >= retval )
{
switch ( idx )
{
case 0:
val = type1->font_bbox.xMin;
break;
case 1:
val = type1->font_bbox.yMin;
break;
case 2:
val = type1->font_bbox.xMax;
break;
case 3:
val = type1->font_bbox.yMax;
break;
}
*((FT_Fixed *)value) = val;
}
}
break;
case PS_DICT_PAINT_TYPE:
retval = sizeof ( type1->paint_type );
if ( value && value_len >= retval )
*((FT_Byte *)value) = type1->paint_type;
break;
case PS_DICT_FONT_NAME:
retval = ft_strlen( type1->font_name ) + 1;
if ( value && value_len >= retval )
ft_memcpy( value, (void *)( type1->font_name ), retval );
break;
case PS_DICT_UNIQUE_ID:
retval = sizeof ( type1->private_dict.unique_id );
if ( value && value_len >= retval )
*((FT_Int *)value) = type1->private_dict.unique_id;
break;
case PS_DICT_NUM_CHAR_STRINGS:
retval = sizeof ( type1->num_glyphs );
if ( value && value_len >= retval )
*((FT_Int *)value) = type1->num_glyphs;
break;
case PS_DICT_CHAR_STRING_KEY:
if ( idx < (FT_UInt)type1->num_glyphs )
{
retval = ft_strlen( type1->glyph_names[idx] ) + 1;
if ( value && value_len >= retval )
{
ft_memcpy( value, (void *)( type1->glyph_names[idx] ), retval );
((FT_Char *)value)[retval - 1] = (FT_Char)'\0';
}
}
break;
case PS_DICT_CHAR_STRING:
if ( idx < (FT_UInt)type1->num_glyphs )
{
retval = type1->charstrings_len[idx] + 1;
if ( value && value_len >= retval )
{
ft_memcpy( value, (void *)( type1->charstrings[idx] ),
retval - 1 );
((FT_Char *)value)[retval - 1] = (FT_Char)'\0';
}
}
break;
case PS_DICT_ENCODING_TYPE:
retval = sizeof ( type1->encoding_type );
if ( value && value_len >= retval )
*((T1_EncodingType *)value) = type1->encoding_type;
break;
case PS_DICT_ENCODING_ENTRY:
if ( type1->encoding_type == T1_ENCODING_TYPE_ARRAY &&
idx < (FT_UInt)type1->encoding.num_chars )
{
retval = ft_strlen( type1->encoding.char_name[idx] ) + 1;
if ( value && value_len >= retval )
{
ft_memcpy( value, (void *)( type1->encoding.char_name[idx] ),
retval - 1 );
((FT_Char *)value)[retval - 1] = (FT_Char)'\0';
}
}
break;
case PS_DICT_NUM_SUBRS:
retval = sizeof ( type1->num_subrs );
if ( value && value_len >= retval )
*((FT_Int *)value) = type1->num_subrs;
break;
case PS_DICT_SUBR:
if ( idx < (FT_UInt)type1->num_subrs )
{
retval = type1->subrs_len[idx] + 1;
if ( value && value_len >= retval )
{
ft_memcpy( value, (void *)( type1->subrs[idx] ), retval - 1 );
((FT_Char *)value)[retval - 1] = (FT_Char)'\0';
}
}
break;
case PS_DICT_STD_HW:
retval = sizeof ( type1->private_dict.standard_width[0] );
if ( value && value_len >= retval )
*((FT_UShort *)value) = type1->private_dict.standard_width[0];
break;
case PS_DICT_STD_VW:
retval = sizeof ( type1->private_dict.standard_height[0] );
if ( value && value_len >= retval )
*((FT_UShort *)value) = type1->private_dict.standard_height[0];
break;
case PS_DICT_NUM_BLUE_VALUES:
retval = sizeof ( type1->private_dict.num_blue_values );
if ( value && value_len >= retval )
*((FT_Byte *)value) = type1->private_dict.num_blue_values;
break;
case PS_DICT_BLUE_VALUE:
if ( idx < type1->private_dict.num_blue_values )
{
retval = sizeof ( type1->private_dict.blue_values[idx] );
if ( value && value_len >= retval )
*((FT_Short *)value) = type1->private_dict.blue_values[idx];
}
break;
case PS_DICT_BLUE_SCALE:
retval = sizeof ( type1->private_dict.blue_scale );
if ( value && value_len >= retval )
*((FT_Fixed *)value) = type1->private_dict.blue_scale;
break;
case PS_DICT_BLUE_FUZZ:
retval = sizeof ( type1->private_dict.blue_fuzz );
if ( value && value_len >= retval )
*((FT_Int *)value) = type1->private_dict.blue_fuzz;
break;
case PS_DICT_BLUE_SHIFT:
retval = sizeof ( type1->private_dict.blue_shift );
if ( value && value_len >= retval )
*((FT_Int *)value) = type1->private_dict.blue_shift;
break;
case PS_DICT_NUM_OTHER_BLUES:
retval = sizeof ( type1->private_dict.num_other_blues );
if ( value && value_len >= retval )
*((FT_Byte *)value) = type1->private_dict.num_other_blues;
break;
case PS_DICT_OTHER_BLUE:
if ( idx < type1->private_dict.num_other_blues )
{
retval = sizeof ( type1->private_dict.other_blues[idx] );
if ( value && value_len >= retval )
*((FT_Short *)value) = type1->private_dict.other_blues[idx];
}
break;
case PS_DICT_NUM_FAMILY_BLUES:
retval = sizeof ( type1->private_dict.num_family_blues );
if ( value && value_len >= retval )
*((FT_Byte *)value) = type1->private_dict.num_family_blues;
break;
case PS_DICT_FAMILY_BLUE:
if ( idx < type1->private_dict.num_family_blues )
{
retval = sizeof ( type1->private_dict.family_blues[idx] );
if ( value && value_len >= retval )
*((FT_Short *)value) = type1->private_dict.family_blues[idx];
}
break;
case PS_DICT_NUM_FAMILY_OTHER_BLUES:
retval = sizeof ( type1->private_dict.num_family_other_blues );
if ( value && value_len >= retval )
*((FT_Byte *)value) = type1->private_dict.num_family_other_blues;
break;
case PS_DICT_FAMILY_OTHER_BLUE:
if ( idx < type1->private_dict.num_family_other_blues )
{
retval = sizeof ( type1->private_dict.family_other_blues[idx] );
if ( value && value_len >= retval )
*((FT_Short *)value) = type1->private_dict.family_other_blues[idx];
}
break;
case PS_DICT_NUM_STEM_SNAP_H:
retval = sizeof ( type1->private_dict.num_snap_widths );
if ( value && value_len >= retval )
*((FT_Byte *)value) = type1->private_dict.num_snap_widths;
break;
case PS_DICT_STEM_SNAP_H:
if ( idx < type1->private_dict.num_snap_widths )
{
retval = sizeof ( type1->private_dict.snap_widths[idx] );
if ( value && value_len >= retval )
*((FT_Short *)value) = type1->private_dict.snap_widths[idx];
}
break;
case PS_DICT_NUM_STEM_SNAP_V:
retval = sizeof ( type1->private_dict.num_snap_heights );
if ( value && value_len >= retval )
*((FT_Byte *)value) = type1->private_dict.num_snap_heights;
break;
case PS_DICT_STEM_SNAP_V:
if ( idx < type1->private_dict.num_snap_heights )
{
retval = sizeof ( type1->private_dict.snap_heights[idx] );
if ( value && value_len >= retval )
*((FT_Short *)value) = type1->private_dict.snap_heights[idx];
}
break;
case PS_DICT_RND_STEM_UP:
retval = sizeof ( type1->private_dict.round_stem_up );
if ( value && value_len >= retval )
*((FT_Bool *)value) = type1->private_dict.round_stem_up;
break;
case PS_DICT_FORCE_BOLD:
retval = sizeof ( type1->private_dict.force_bold );
if ( value && value_len >= retval )
*((FT_Bool *)value) = type1->private_dict.force_bold;
break;
case PS_DICT_MIN_FEATURE:
if ( idx < sizeof ( type1->private_dict.min_feature ) /
sizeof ( type1->private_dict.min_feature[0] ) )
{
retval = sizeof ( type1->private_dict.min_feature[idx] );
if ( value && value_len >= retval )
*((FT_Short *)value) = type1->private_dict.min_feature[idx];
}
break;
case PS_DICT_LEN_IV:
retval = sizeof ( type1->private_dict.lenIV );
if ( value && value_len >= retval )
*((FT_Int *)value) = type1->private_dict.lenIV;
break;
case PS_DICT_PASSWORD:
retval = sizeof ( type1->private_dict.password );
if ( value && value_len >= retval )
*((FT_Long *)value) = type1->private_dict.password;
break;
case PS_DICT_LANGUAGE_GROUP:
retval = sizeof ( type1->private_dict.language_group );
if ( value && value_len >= retval )
*((FT_Long *)value) = type1->private_dict.language_group;
break;
case PS_DICT_IS_FIXED_PITCH:
retval = sizeof ( type1->font_info.is_fixed_pitch );
if ( value && value_len >= retval )
*((FT_Bool *)value) = type1->font_info.is_fixed_pitch;
break;
case PS_DICT_UNDERLINE_POSITION:
retval = sizeof ( type1->font_info.underline_position );
if ( value && value_len >= retval )
*((FT_Short *)value) = type1->font_info.underline_position;
break;
case PS_DICT_UNDERLINE_THICKNESS:
retval = sizeof ( type1->font_info.underline_thickness );
if ( value && value_len >= retval )
*((FT_UShort *)value) = type1->font_info.underline_thickness;
break;
case PS_DICT_FS_TYPE:
retval = sizeof ( type1->font_extra.fs_type );
if ( value && value_len >= retval )
*((FT_UShort *)value) = type1->font_extra.fs_type;
break;
case PS_DICT_VERSION:
retval = ft_strlen( type1->font_info.version ) + 1;
if ( value && value_len >= retval )
ft_memcpy( value, (void *)( type1->font_info.version ), retval );
break;
case PS_DICT_NOTICE:
retval = ft_strlen( type1->font_info.notice ) + 1;
if ( value && value_len >= retval )
ft_memcpy( value, (void *)( type1->font_info.notice ), retval );
break;
case PS_DICT_FULL_NAME:
retval = ft_strlen( type1->font_info.full_name ) + 1;
if ( value && value_len >= retval )
ft_memcpy( value, (void *)( type1->font_info.full_name ), retval );
break;
case PS_DICT_FAMILY_NAME:
retval = ft_strlen( type1->font_info.family_name ) + 1;
if ( value && value_len >= retval )
ft_memcpy( value, (void *)( type1->font_info.family_name ), retval );
break;
case PS_DICT_WEIGHT:
retval = ft_strlen( type1->font_info.weight ) + 1;
if ( value && value_len >= retval )
ft_memcpy( value, (void *)( type1->font_info.weight ), retval );
break;
case PS_DICT_ITALIC_ANGLE:
retval = sizeof ( type1->font_info.italic_angle );
if ( value && value_len >= retval )
*((FT_Long *)value) = type1->font_info.italic_angle;
break;
default:
break;
}
return retval;
}
static const FT_Service_PsInfoRec t1_service_ps_info =
{
(PS_GetFontInfoFunc) t1_ps_get_font_info,
(PS_GetFontExtraFunc) t1_ps_get_font_extra,
(PS_HasGlyphNamesFunc) t1_ps_has_glyph_names,
(PS_GetFontPrivateFunc)t1_ps_get_font_private,
(PS_GetFontValueFunc) t1_ps_get_font_value,
};
static const FT_Service_KerningRec t1_service_kerning =
{
T1_Get_Track_Kerning,
};
/*
* SERVICE LIST
*
*/
static const FT_ServiceDescRec t1_services[] =
{
{ FT_SERVICE_ID_POSTSCRIPT_FONT_NAME, &t1_service_ps_name },
{ FT_SERVICE_ID_GLYPH_DICT, &t1_service_glyph_dict },
{ FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_TYPE_1 },
{ FT_SERVICE_ID_POSTSCRIPT_INFO, &t1_service_ps_info },
{ FT_SERVICE_ID_KERNING, &t1_service_kerning },
{ FT_SERVICE_ID_MULTI_MASTERS, &t1_service_multi_masters },
{ NULL, NULL }
};
FT_CALLBACK_DEF( FT_Module_Interface )
Get_Interface( FT_Module module,
const FT_String* t1_interface )
{
FT_UNUSED( module );
return ft_service_list_lookup( t1_services, t1_interface );
}
/*************************************************************************/
/* */
/* <Function> */
/* Get_Kerning */
/* */
/* <Description> */
/* A driver method used to return the kerning vector between two */
/* glyphs of the same face. */
/* */
/* <Input> */
/* face :: A handle to the source face object. */
/* */
/* left_glyph :: The index of the left glyph in the kern pair. */
/* */
/* right_glyph :: The index of the right glyph in the kern pair. */
/* */
/* <Output> */
/* kerning :: The kerning vector. This is in font units for */
/* scalable formats, and in pixels for fixed-sizes */
/* formats. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* Only horizontal layouts (left-to-right & right-to-left) are */
/* supported by this function. Other layouts, or more sophisticated */
/* kernings are out of scope of this method (the basic driver */
/* interface is meant to be simple). */
/* */
/* They can be implemented by format-specific interfaces. */
/* */
static FT_Error
/* T1_Face */
Get_Kerning( FT_Face t1face,
FT_UInt left_glyph,
FT_UInt right_glyph,
FT_Vector* kerning )
{
T1_Face face = (T1_Face)t1face;
kerning->x = 0;
kerning->y = 0;
if ( face->afm_data )
T1_Get_Kerning( (AFM_FontInfo)face->afm_data,
left_glyph,
right_glyph,
kerning );
return T1_Err_Ok;
}
FT_CALLBACK_TABLE_DEF
const FT_Driver_ClassRec t1_driver_class =
{
{
FT_MODULE_FONT_DRIVER |
FT_MODULE_DRIVER_SCALABLE |
FT_MODULE_DRIVER_HAS_HINTER,
sizeof ( FT_DriverRec ),
"type1",
0x10000L,
0x20000L,
/* format interface */
0,
T1_Driver_Init,
T1_Driver_Done,
Get_Interface,
},
sizeof ( T1_FaceRec ),
sizeof ( T1_SizeRec ),
sizeof ( T1_GlyphSlotRec ),
T1_Face_Init,
T1_Face_Done,
T1_Size_Init,
T1_Size_Done,
T1_GlyphSlot_Init,
T1_GlyphSlot_Done,
T1_Load_Glyph,
Get_Kerning,
T1_Read_Metrics,
T1_Get_Advances,
T1_Size_Request,
/* FT_Size_SelectFunc */
0
};
/* END */
/***************************************************************************/
/* */
/* t1gload.c */
/* */
/* Type 1 Glyph Loader (body). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2008, 2009, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t1gload
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/********** *********/
/********** COMPUTE THE MAXIMUM ADVANCE WIDTH *********/
/********** *********/
/********** The following code is in charge of computing *********/
/********** the maximum advance width of the font. It *********/
/********** quickly processes each glyph charstring to *********/
/********** extract the value from either a `sbw' or `seac' *********/
/********** operator. *********/
/********** *********/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( FT_Error )
T1_Parse_Glyph_And_Get_Char_String( T1_Decoder decoder,
FT_UInt glyph_index,
FT_Data* char_string )
{
T1_Face face = (T1_Face)decoder->builder.face;
T1_Font type1 = &face->type1;
FT_Error error = T1_Err_Ok;
FT_Incremental_InterfaceRec *inc =
face->root.internal->incremental_interface;
decoder->font_matrix = type1->font_matrix;
decoder->font_offset = type1->font_offset;
/* For incremental fonts get the character data using the */
/* callback function. */
if ( inc )
error = inc->funcs->get_glyph_data( inc->object,
glyph_index, char_string );
else
/* For ordinary fonts get the character data stored in the face record. */
{
char_string->pointer = type1->charstrings[glyph_index];
char_string->length = (FT_Int)type1->charstrings_len[glyph_index];
}
if ( !error )
error = decoder->funcs.parse_charstrings(
decoder, (FT_Byte*)char_string->pointer,
char_string->length );
/* Incremental fonts can optionally override the metrics. */
if ( !error && inc && inc->funcs->get_glyph_metrics )
{
FT_Incremental_MetricsRec metrics;
metrics.bearing_x = FIXED_TO_INT( decoder->builder.left_bearing.x );
metrics.bearing_y = 0;
metrics.advance = FIXED_TO_INT( decoder->builder.advance.x );
metrics.advance_v = FIXED_TO_INT( decoder->builder.advance.y );
error = inc->funcs->get_glyph_metrics( inc->object,
glyph_index, FALSE, &metrics );
decoder->builder.left_bearing.x = INT_TO_FIXED( metrics.bearing_x );
decoder->builder.advance.x = INT_TO_FIXED( metrics.advance );
decoder->builder.advance.y = INT_TO_FIXED( metrics.advance_v );
}
return error;
}
FT_CALLBACK_DEF( FT_Error )
T1_Parse_Glyph( T1_Decoder decoder,
FT_UInt glyph_index )
{
FT_Data glyph_data;
FT_Error error = T1_Parse_Glyph_And_Get_Char_String(
decoder, glyph_index, &glyph_data );
if ( !error )
{
T1_Face face = (T1_Face)decoder->builder.face;
if ( face->root.internal->incremental_interface )
face->root.internal->incremental_interface->funcs->free_glyph_data(
face->root.internal->incremental_interface->object,
&glyph_data );
}
return error;
}
FT_LOCAL_DEF( FT_Error )
T1_Compute_Max_Advance( T1_Face face,
FT_Pos* max_advance )
{
FT_Error error;
T1_DecoderRec decoder;
FT_Int glyph_index;
T1_Font type1 = &face->type1;
PSAux_Service psaux = (PSAux_Service)face->psaux;
FT_ASSERT( ( face->len_buildchar == 0 ) == ( face->buildchar == NULL ) );
*max_advance = 0;
/* initialize load decoder */
error = psaux->t1_decoder_funcs->init( &decoder,
(FT_Face)face,
/* size */
0,
/* glyph slot */
0,
(FT_Byte**)type1->glyph_names,
face->blend,
0,
FT_RENDER_MODE_NORMAL,
T1_Parse_Glyph );
if ( error )
return error;
decoder.builder.metrics_only = 1;
decoder.builder.load_points = 0;
decoder.num_subrs = type1->num_subrs;
decoder.subrs = type1->subrs;
decoder.subrs_len = type1->subrs_len;
decoder.buildchar = face->buildchar;
decoder.len_buildchar = face->len_buildchar;
*max_advance = 0;
/* for each glyph, parse the glyph charstring and extract */
/* the advance width */
for ( glyph_index = 0; glyph_index < type1->num_glyphs; glyph_index++ )
{
/* now get load the unscaled outline */
error = T1_Parse_Glyph( &decoder, glyph_index );
if ( glyph_index == 0 || decoder.builder.advance.x > *max_advance )
*max_advance = decoder.builder.advance.x;
/* ignore the error if one occurred - skip to next glyph */
}
psaux->t1_decoder_funcs->done( &decoder );
return T1_Err_Ok;
}
FT_LOCAL_DEF( FT_Error )
/* T1_Face */
T1_Get_Advances( FT_Face t1face,
FT_UInt first,
FT_UInt count,
FT_Int32 load_flags,
FT_Fixed* advances )
{
T1_Face face = (T1_Face)t1face;
T1_DecoderRec decoder;
T1_Font type1 = &face->type1;
PSAux_Service psaux = (PSAux_Service)face->psaux;
FT_UInt nn;
FT_Error error;
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
for ( nn = 0; nn < count; nn++ )
advances[nn] = 0;
return T1_Err_Ok;
}
error = psaux->t1_decoder_funcs->init( &decoder,
(FT_Face)face,
/* size */
0,
/* glyph slot */
0,
(FT_Byte**)type1->glyph_names,
face->blend,
0,
FT_RENDER_MODE_NORMAL,
T1_Parse_Glyph );
if ( error )
return error;
decoder.builder.metrics_only = 1;
decoder.builder.load_points = 0;
decoder.num_subrs = type1->num_subrs;
decoder.subrs = type1->subrs;
decoder.subrs_len = type1->subrs_len;
decoder.buildchar = face->buildchar;
decoder.len_buildchar = face->len_buildchar;
for ( nn = 0; nn < count; nn++ )
{
error = T1_Parse_Glyph( &decoder, first + nn );
if ( !error )
advances[nn] = FIXED_TO_INT( decoder.builder.advance.x );
else
advances[nn] = 0;
}
return T1_Err_Ok;
}
FT_LOCAL_DEF( FT_Error )
/* T1_GlyphSlot */
T1_Load_Glyph( FT_GlyphSlot t1glyph,
/* T1_Size */
FT_Size t1size,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
T1_GlyphSlot glyph = (T1_GlyphSlot)t1glyph;
FT_Error error;
T1_DecoderRec decoder;
T1_Face face = (T1_Face)t1glyph->face;
FT_Bool hinting;
T1_Font type1 = &face->type1;
PSAux_Service psaux = (PSAux_Service)face->psaux;
const T1_Decoder_Funcs decoder_funcs = psaux->t1_decoder_funcs;
FT_Matrix font_matrix;
FT_Vector font_offset;
FT_Data glyph_data;
FT_Bool must_finish_decoder = FALSE;
FT_Bool glyph_data_loaded = 0;
if ( glyph_index >= (FT_UInt)face->root.num_glyphs &&
!face->root.internal->incremental_interface )
{
error = T1_Err_Invalid_Argument;
goto Exit;
}
FT_ASSERT( ( face->len_buildchar == 0 ) == ( face->buildchar == NULL ) );
if ( load_flags & FT_LOAD_NO_RECURSE )
load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING;
if ( t1size )
{
glyph->x_scale = t1size->metrics.x_scale;
glyph->y_scale = t1size->metrics.y_scale;
}
else
{
glyph->x_scale = 0x10000L;
glyph->y_scale = 0x10000L;
}
t1glyph->outline.n_points = 0;
t1glyph->outline.n_contours = 0;
hinting = FT_BOOL( ( load_flags & FT_LOAD_NO_SCALE ) == 0 &&
( load_flags & FT_LOAD_NO_HINTING ) == 0 );
t1glyph->format = FT_GLYPH_FORMAT_OUTLINE;
error = decoder_funcs->init( &decoder,
t1glyph->face,
t1size,
t1glyph,
(FT_Byte**)type1->glyph_names,
face->blend,
FT_BOOL( hinting ),
FT_LOAD_TARGET_MODE( load_flags ),
T1_Parse_Glyph );
if ( error )
goto Exit;
must_finish_decoder = TRUE;
decoder.builder.no_recurse = FT_BOOL(
( load_flags & FT_LOAD_NO_RECURSE ) != 0 );
decoder.num_subrs = type1->num_subrs;
decoder.subrs = type1->subrs;
decoder.subrs_len = type1->subrs_len;
decoder.buildchar = face->buildchar;
decoder.len_buildchar = face->len_buildchar;
/* now load the unscaled outline */
error = T1_Parse_Glyph_And_Get_Char_String( &decoder, glyph_index,
&glyph_data );
if ( error )
goto Exit;
glyph_data_loaded = 1;
font_matrix = decoder.font_matrix;
font_offset = decoder.font_offset;
/* save new glyph tables */
decoder_funcs->done( &decoder );
must_finish_decoder = FALSE;
/* now, set the metrics -- this is rather simple, as */
/* the left side bearing is the xMin, and the top side */
/* bearing the yMax */
if ( !error )
{
t1glyph->outline.flags &= FT_OUTLINE_OWNER;
t1glyph->outline.flags |= FT_OUTLINE_REVERSE_FILL;
/* for composite glyphs, return only left side bearing and */
/* advance width */
if ( load_flags & FT_LOAD_NO_RECURSE )
{
FT_Slot_Internal internal = t1glyph->internal;
t1glyph->metrics.horiBearingX =
FIXED_TO_INT( decoder.builder.left_bearing.x );
t1glyph->metrics.horiAdvance =
FIXED_TO_INT( decoder.builder.advance.x );
internal->glyph_matrix = font_matrix;
internal->glyph_delta = font_offset;
internal->glyph_transformed = 1;
}
else
{
FT_BBox cbox;
FT_Glyph_Metrics* metrics = &t1glyph->metrics;
FT_Vector advance;
/* copy the _unscaled_ advance width */
metrics->horiAdvance =
FIXED_TO_INT( decoder.builder.advance.x );
t1glyph->linearHoriAdvance =
FIXED_TO_INT( decoder.builder.advance.x );
t1glyph->internal->glyph_transformed = 0;
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
/* make up vertical ones */
metrics->vertAdvance = ( face->type1.font_bbox.yMax -
face->type1.font_bbox.yMin ) >> 16;
t1glyph->linearVertAdvance = metrics->vertAdvance;
}
else
{
metrics->vertAdvance =
FIXED_TO_INT( decoder.builder.advance.y );
t1glyph->linearVertAdvance =
FIXED_TO_INT( decoder.builder.advance.y );
}
t1glyph->format = FT_GLYPH_FORMAT_OUTLINE;
if ( t1size && t1size->metrics.y_ppem < 24 )
t1glyph->outline.flags |= FT_OUTLINE_HIGH_PRECISION;
#if 1
/* apply the font matrix, if any */
if ( font_matrix.xx != 0x10000L || font_matrix.yy != font_matrix.xx ||
font_matrix.xy != 0 || font_matrix.yx != 0 )
FT_Outline_Transform( &t1glyph->outline, &font_matrix );
if ( font_offset.x || font_offset.y )
FT_Outline_Translate( &t1glyph->outline,
font_offset.x,
font_offset.y );
advance.x = metrics->horiAdvance;
advance.y = 0;
FT_Vector_Transform( &advance, &font_matrix );
metrics->horiAdvance = advance.x + font_offset.x;
advance.x = 0;
advance.y = metrics->vertAdvance;
FT_Vector_Transform( &advance, &font_matrix );
metrics->vertAdvance = advance.y + font_offset.y;
#endif
if ( ( load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
/* scale the outline and the metrics */
FT_Int n;
FT_Outline* cur = decoder.builder.base;
FT_Vector* vec = cur->points;
FT_Fixed x_scale = glyph->x_scale;
FT_Fixed y_scale = glyph->y_scale;
/* First of all, scale the points, if we are not hinting */
if ( !hinting || ! decoder.builder.hints_funcs )
for ( n = cur->n_points; n > 0; n--, vec++ )
{
vec->x = FT_MulFix( vec->x, x_scale );
vec->y = FT_MulFix( vec->y, y_scale );
}
/* Then scale the metrics */
metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale );
metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, y_scale );
}
/* compute the other metrics */
FT_Outline_Get_CBox( &t1glyph->outline, &cbox );
metrics->width = cbox.xMax - cbox.xMin;
metrics->height = cbox.yMax - cbox.yMin;
metrics->horiBearingX = cbox.xMin;
metrics->horiBearingY = cbox.yMax;
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
/* make up vertical ones */
ft_synthesize_vertical_metrics( metrics,
metrics->vertAdvance );
}
}
/* Set control data to the glyph charstrings. Note that this is */
/* _not_ zero-terminated. */
t1glyph->control_data = (FT_Byte*)glyph_data.pointer;
t1glyph->control_len = glyph_data.length;
}
Exit:
if ( glyph_data_loaded && face->root.internal->incremental_interface )
{
face->root.internal->incremental_interface->funcs->free_glyph_data(
face->root.internal->incremental_interface->object,
&glyph_data );
/* Set the control data to null - it is no longer available if */
/* loaded incrementally. */
t1glyph->control_data = 0;
t1glyph->control_len = 0;
}
if ( must_finish_decoder )
decoder_funcs->done( &decoder );
return error;
}
/* END */
/***************************************************************************/
/* */
/* t1afm.c */
/* */
/* AFM support for Type 1 fonts (body). */
/* */
/* Copyright 1996-2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t1afm
FT_LOCAL_DEF( void )
T1_Done_Metrics( FT_Memory memory,
AFM_FontInfo fi )
{
FT_FREE( fi->KernPairs );
fi->NumKernPair = 0;
FT_FREE( fi->TrackKerns );
fi->NumTrackKern = 0;
FT_FREE( fi );
}
/* read a glyph name and return the equivalent glyph index */
static FT_Int
t1_get_index( const char* name,
FT_Offset len,
void* user_data )
{
T1_Font type1 = (T1_Font)user_data;
FT_Int n;
/* PS string/name length must be < 16-bit */
if ( len > 0xFFFFU )
return 0;
for ( n = 0; n < type1->num_glyphs; n++ )
{
char* gname = (char*)type1->glyph_names[n];
if ( gname && gname[0] == name[0] &&
ft_strlen( gname ) == len &&
ft_strncmp( gname, name, len ) == 0 )
return n;
}
return 0;
}
#undef KERN_INDEX
#define KERN_INDEX( g1, g2 ) ( ( (FT_ULong)(g1) << 16 ) | (g2) )
/* compare two kerning pairs */
FT_CALLBACK_DEF( int )
compare_kern_pairs( const void* a,
const void* b )
{
AFM_KernPair pair1 = (AFM_KernPair)a;
AFM_KernPair pair2 = (AFM_KernPair)b;
FT_ULong index1 = KERN_INDEX( pair1->index1, pair1->index2 );
FT_ULong index2 = KERN_INDEX( pair2->index1, pair2->index2 );
if ( index1 > index2 )
return 1;
else if ( index1 < index2 )
return -1;
else
return 0;
}
/* parse a PFM file -- for now, only read the kerning pairs */
static FT_Error
T1_Read_PFM( FT_Face t1_face,
FT_Stream stream,
AFM_FontInfo fi )
{
FT_Error error = T1_Err_Ok;
FT_Memory memory = stream->memory;
FT_Byte* start;
FT_Byte* limit;
FT_Byte* p;
AFM_KernPair kp;
FT_Int width_table_length;
FT_CharMap oldcharmap;
FT_CharMap charmap;
FT_Int n;
start = (FT_Byte*)stream->cursor;
limit = (FT_Byte*)stream->limit;
p = start;
/* Figure out how long the width table is. */
/* This info is a little-endian short at offset 99. */
p = start + 99;
if ( p + 2 > limit )
{
error = T1_Err_Unknown_File_Format;
goto Exit;
}
width_table_length = FT_PEEK_USHORT_LE( p );
p += 18 + width_table_length;
if ( p + 0x12 > limit || FT_PEEK_USHORT_LE( p ) < 0x12 )
/* extension table is probably optional */
goto Exit;
/* Kerning offset is 14 bytes from start of extensions table. */
p += 14;
p = start + FT_PEEK_ULONG_LE( p );
if ( p == start )
/* zero offset means no table */
goto Exit;
if ( p + 2 > limit )
{
error = T1_Err_Unknown_File_Format;
goto Exit;
}
fi->NumKernPair = FT_PEEK_USHORT_LE( p );
p += 2;
if ( p + 4 * fi->NumKernPair > limit )
{
error = T1_Err_Unknown_File_Format;
goto Exit;
}
/* Actually, kerning pairs are simply optional! */
if ( fi->NumKernPair == 0 )
goto Exit;
/* allocate the pairs */
if ( FT_QNEW_ARRAY( fi->KernPairs, fi->NumKernPair ) )
goto Exit;
/* now, read each kern pair */
kp = fi->KernPairs;
limit = p + 4 * fi->NumKernPair;
/* PFM kerning data are stored by encoding rather than glyph index, */
/* so find the PostScript charmap of this font and install it */
/* temporarily. If we find no PostScript charmap, then just use */
/* the default and hope it is the right one. */
oldcharmap = t1_face->charmap;
charmap = NULL;
for ( n = 0; n < t1_face->num_charmaps; n++ )
{
charmap = t1_face->charmaps[n];
/* check against PostScript pseudo platform */
if ( charmap->platform_id == 7 )
{
error = FT_Set_Charmap( t1_face, charmap );
if ( error )
goto Exit;
break;
}
}
/* Kerning info is stored as: */
/* */
/* encoding of first glyph (1 byte) */
/* encoding of second glyph (1 byte) */
/* offset (little-endian short) */
for ( ; p < limit ; p += 4 )
{
kp->index1 = FT_Get_Char_Index( t1_face, p[0] );
kp->index2 = FT_Get_Char_Index( t1_face, p[1] );
kp->x = (FT_Int)FT_PEEK_SHORT_LE(p + 2);
kp->y = 0;
kp++;
}
if ( oldcharmap != NULL )
error = FT_Set_Charmap( t1_face, oldcharmap );
if ( error )
goto Exit;
/* now, sort the kern pairs according to their glyph indices */
ft_qsort( fi->KernPairs, fi->NumKernPair, sizeof ( AFM_KernPairRec ),
compare_kern_pairs );
Exit:
if ( error )
{
FT_FREE( fi->KernPairs );
fi->NumKernPair = 0;
}
return error;
}
/* parse a metrics file -- either AFM or PFM depending on what */
/* it turns out to be */
FT_LOCAL_DEF( FT_Error )
T1_Read_Metrics( FT_Face t1_face,
FT_Stream stream )
{
PSAux_Service psaux;
FT_Memory memory = stream->memory;
AFM_ParserRec parser;
AFM_FontInfo fi = NULL;
FT_Error error = T1_Err_Unknown_File_Format;
T1_Font t1_font = &( (T1_Face)t1_face )->type1;
if ( FT_NEW( fi ) ||
FT_FRAME_ENTER( stream->size ) )
goto Exit;
fi->FontBBox = t1_font->font_bbox;
fi->Ascender = t1_font->font_bbox.yMax;
fi->Descender = t1_font->font_bbox.yMin;
psaux = (PSAux_Service)( (T1_Face)t1_face )->psaux;
if ( psaux->afm_parser_funcs )
{
error = psaux->afm_parser_funcs->init( &parser,
stream->memory,
stream->cursor,
stream->limit );
if ( !error )
{
parser.FontInfo = fi;
parser.get_index = t1_get_index;
parser.user_data = t1_font;
error = psaux->afm_parser_funcs->parse( &parser );
psaux->afm_parser_funcs->done( &parser );
}
}
if ( error == T1_Err_Unknown_File_Format )
{
FT_Byte* start = stream->cursor;
/* MS Windows allows versions up to 0x3FF without complaining */
if ( stream->size > 6 &&
start[1] < 4 &&
FT_PEEK_ULONG_LE( start + 2 ) == stream->size )
error = T1_Read_PFM( t1_face, stream, fi );
}
if ( !error )
{
t1_font->font_bbox = fi->FontBBox;
t1_face->bbox.xMin = fi->FontBBox.xMin >> 16;
t1_face->bbox.yMin = fi->FontBBox.yMin >> 16;
/* no `U' suffix here to 0xFFFF! */
t1_face->bbox.xMax = ( fi->FontBBox.xMax + 0xFFFF ) >> 16;
t1_face->bbox.yMax = ( fi->FontBBox.yMax + 0xFFFF ) >> 16;
/* no `U' suffix here to 0x8000! */
t1_face->ascender = (FT_Short)( ( fi->Ascender + 0x8000 ) >> 16 );
t1_face->descender = (FT_Short)( ( fi->Descender + 0x8000 ) >> 16 );
if ( fi->NumKernPair )
{
t1_face->face_flags |= FT_FACE_FLAG_KERNING;
( (T1_Face)t1_face )->afm_data = fi;
fi = NULL;
}
}
FT_FRAME_EXIT();
Exit:
if ( fi != NULL )
T1_Done_Metrics( memory, fi );
return error;
}
/* find the kerning for a given glyph pair */
FT_LOCAL_DEF( void )
T1_Get_Kerning( AFM_FontInfo fi,
FT_UInt glyph1,
FT_UInt glyph2,
FT_Vector* kerning )
{
AFM_KernPair min, mid, max;
FT_ULong idx = KERN_INDEX( glyph1, glyph2 );
/* simple binary search */
min = fi->KernPairs;
max = min + fi->NumKernPair - 1;
while ( min <= max )
{
FT_ULong midi;
mid = min + ( max - min ) / 2;
midi = KERN_INDEX( mid->index1, mid->index2 );
if ( midi == idx )
{
kerning->x = mid->x;
kerning->y = mid->y;
return;
}
if ( midi < idx )
min = mid + 1;
else
max = mid - 1;
}
kerning->x = 0;
kerning->y = 0;
}
FT_LOCAL_DEF( FT_Error )
T1_Get_Track_Kerning( FT_Face face,
FT_Fixed ptsize,
FT_Int degree,
FT_Fixed* kerning )
{
AFM_FontInfo fi = (AFM_FontInfo)( (T1_Face)face )->afm_data;
FT_Int i;
if ( !fi )
return T1_Err_Invalid_Argument;
for ( i = 0; i < fi->NumTrackKern; i++ )
{
AFM_TrackKern tk = fi->TrackKerns + i;
if ( tk->degree != degree )
continue;
if ( ptsize < tk->min_ptsize )
*kerning = tk->min_kern;
else if ( ptsize > tk->max_ptsize )
*kerning = tk->max_kern;
else
{
*kerning = FT_MulDiv( ptsize - tk->min_ptsize,
tk->max_kern - tk->min_kern,
tk->max_ptsize - tk->min_ptsize ) +
tk->min_kern;
}
}
return T1_Err_Ok;
}
/* END */
/* END */
/***************************************************************************/
/* */
/* type42.c */
/* */
/* FreeType Type 42 driver component. */
/* */
/* Copyright 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* t42objs.c */
/* */
/* Type 42 objects manager (body). */
/* */
/* Copyright 2002-2009, 2011 */
/* by Roberto Alameda. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* t42objs.h */
/* */
/* Type 42 objects manager (specification). */
/* */
/* Copyright 2002, 2003, 2006, 2007, 2011 by Roberto Alameda. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T42OBJS_H__
/***************************************************************************/
/* */
/* t42types.h */
/* */
/* Type 42 font data types (specification only). */
/* */
/* Copyright 2002, 2003, 2006, 2008 by Roberto Alameda. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T42TYPES_H__
FT_BEGIN_HEADER
typedef struct T42_FaceRec_
{
FT_FaceRec root;
T1_FontRec type1;
const void* psnames;
const void* psaux;
#if 0
const void* afm_data;
#endif
FT_Byte* ttf_data;
FT_ULong ttf_size;
FT_Face ttf_face;
FT_CharMapRec charmaprecs[2];
FT_CharMap charmaps[2];
PS_UnicodesRec unicode_map;
} T42_FaceRec, *T42_Face;
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/* Type42 size */
typedef struct T42_SizeRec_
{
FT_SizeRec root;
FT_Size ttsize;
} T42_SizeRec, *T42_Size;
/* Type42 slot */
typedef struct T42_GlyphSlotRec_
{
FT_GlyphSlotRec root;
FT_GlyphSlot ttslot;
} T42_GlyphSlotRec, *T42_GlyphSlot;
/* Type 42 driver */
typedef struct T42_DriverRec_
{
FT_DriverRec root;
FT_Driver_Class ttclazz;
void* extension_component;
} T42_DriverRec, *T42_Driver;
/* */
FT_LOCAL( FT_Error )
T42_Face_Init( FT_Stream stream,
FT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
FT_LOCAL( void )
T42_Face_Done( FT_Face face );
FT_LOCAL( FT_Error )
T42_Size_Init( FT_Size size );
FT_LOCAL( FT_Error )
T42_Size_Request( FT_Size size,
FT_Size_Request req );
FT_LOCAL( FT_Error )
T42_Size_Select( FT_Size size,
FT_ULong strike_index );
FT_LOCAL( void )
T42_Size_Done( FT_Size size );
FT_LOCAL( FT_Error )
T42_GlyphSlot_Init( FT_GlyphSlot slot );
FT_LOCAL( FT_Error )
T42_GlyphSlot_Load( FT_GlyphSlot glyph,
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags );
FT_LOCAL( void )
T42_GlyphSlot_Done( FT_GlyphSlot slot );
FT_LOCAL( FT_Error )
T42_Driver_Init( FT_Module module );
FT_LOCAL( void )
T42_Driver_Done( FT_Module module );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* t42parse.h */
/* */
/* Type 42 font parser (specification). */
/* */
/* Copyright 2002, 2003 by Roberto Alameda. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T42PARSE_H__
FT_BEGIN_HEADER
typedef struct T42_ParserRec_
{
PS_ParserRec root;
FT_Stream stream;
FT_Byte* base_dict;
FT_Long base_len;
FT_Bool in_memory;
} T42_ParserRec, *T42_Parser;
typedef struct T42_Loader_
{
/* parser used to read the stream */
T42_ParserRec parser;
/* number of characters in encoding */
FT_UInt num_chars;
/* PS_Table used to store the */
PS_TableRec encoding_table;
/* encoding character names */
FT_UInt num_glyphs;
PS_TableRec glyph_names;
PS_TableRec charstrings;
/* For moving .notdef glyph to index 0. */
PS_TableRec swap_table;
} T42_LoaderRec, *T42_Loader;
FT_LOCAL( FT_Error )
t42_parser_init( T42_Parser parser,
FT_Stream stream,
FT_Memory memory,
PSAux_Service psaux );
FT_LOCAL( void )
t42_parser_done( T42_Parser parser );
FT_LOCAL( FT_Error )
t42_parse_dict( T42_Face face,
T42_Loader loader,
FT_Byte* base,
FT_Long size );
FT_LOCAL( void )
t42_loader_init( T42_Loader loader,
T42_Face face );
FT_LOCAL( void )
t42_loader_done( T42_Loader loader );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* t42error.h */
/* */
/* Type 42 error codes (specification only). */
/* */
/* Copyright 2002, 2003, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the Type 42 error enumeration constants. */
/* */
/*************************************************************************/
#define __T42ERROR_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX T42_Err_
#define FT_ERR_BASE FT_Mod_Err_Type42
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t42
static FT_Error
T42_Open_Face( T42_Face face )
{
T42_LoaderRec loader;
T42_Parser parser;
T1_Font type1 = &face->type1;
FT_Memory memory = face->root.memory;
FT_Error error;
PSAux_Service psaux = (PSAux_Service)face->psaux;
t42_loader_init( &loader, face );
parser = &loader.parser;
if ( FT_ALLOC( face->ttf_data, 12 ) )
goto Exit;
error = t42_parser_init( parser,
face->root.stream,
memory,
psaux);
if ( error )
goto Exit;
error = t42_parse_dict( face, &loader,
parser->base_dict, parser->base_len );
if ( error )
goto Exit;
if ( type1->font_type != 42 )
{
FT_ERROR(( "T42_Open_Face: cannot handle FontType %d\n",
type1->font_type ));
error = T42_Err_Unknown_File_Format;
goto Exit;
}
/* now, propagate the charstrings and glyphnames tables */
/* to the Type1 data */
type1->num_glyphs = loader.num_glyphs;
if ( !loader.charstrings.init )
{
FT_ERROR(( "T42_Open_Face: no charstrings array in face\n" ));
error = T42_Err_Invalid_File_Format;
}
loader.charstrings.init = 0;
type1->charstrings_block = loader.charstrings.block;
type1->charstrings = loader.charstrings.elements;
type1->charstrings_len = loader.charstrings.lengths;
/* we copy the glyph names `block' and `elements' fields; */
/* the `lengths' field must be released later */
type1->glyph_names_block = loader.glyph_names.block;
type1->glyph_names = (FT_String**)loader.glyph_names.elements;
loader.glyph_names.block = 0;
loader.glyph_names.elements = 0;
/* we must now build type1.encoding when we have a custom array */
if ( type1->encoding_type == T1_ENCODING_TYPE_ARRAY )
{
FT_Int charcode, idx, min_char, max_char;
FT_Byte* char_name;
FT_Byte* glyph_name;
/* OK, we do the following: for each element in the encoding */
/* table, look up the index of the glyph having the same name */
/* as defined in the CharStrings array. */
/* The index is then stored in type1.encoding.char_index, and */
/* the name in type1.encoding.char_name */
min_char = 0;
max_char = 0;
charcode = 0;
for ( ; charcode < loader.encoding_table.max_elems; charcode++ )
{
type1->encoding.char_index[charcode] = 0;
type1->encoding.char_name [charcode] = (char *)".notdef";
char_name = loader.encoding_table.elements[charcode];
if ( char_name )
for ( idx = 0; idx < type1->num_glyphs; idx++ )
{
glyph_name = (FT_Byte*)type1->glyph_names[idx];
if ( ft_strcmp( (const char*)char_name,
(const char*)glyph_name ) == 0 )
{
type1->encoding.char_index[charcode] = (FT_UShort)idx;
type1->encoding.char_name [charcode] = (char*)glyph_name;
/* Change min/max encoded char only if glyph name is */
/* not /.notdef */
if ( ft_strcmp( (const char*)".notdef",
(const char*)glyph_name ) != 0 )
{
if ( charcode < min_char )
min_char = charcode;
if ( charcode >= max_char )
max_char = charcode + 1;
}
break;
}
}
}
type1->encoding.code_first = min_char;
type1->encoding.code_last = max_char;
type1->encoding.num_chars = loader.num_chars;
}
Exit:
t42_loader_done( &loader );
return error;
}
/***************** Driver Functions *************/
FT_LOCAL_DEF( FT_Error )
T42_Face_Init( FT_Stream stream,
/* T42_Face */
FT_Face t42face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
T42_Face face = (T42_Face)t42face;
FT_Error error;
FT_Service_PsCMaps psnames;
PSAux_Service psaux;
FT_Face root = (FT_Face)&face->root;
T1_Font type1 = &face->type1;
PS_FontInfo info = &type1->font_info;
FT_UNUSED( num_params );
FT_UNUSED( params );
FT_UNUSED( face_index );
FT_UNUSED( stream );
face->ttf_face = NULL;
face->root.num_faces = 1;
FT_FACE_FIND_GLOBAL_SERVICE( face, psnames, POSTSCRIPT_CMAPS );
face->psnames = psnames;
face->psaux = FT_Get_Module_Interface( FT_FACE_LIBRARY( face ),
"psaux" );
psaux = (PSAux_Service)face->psaux;
if ( !psaux )
{
FT_ERROR(( "T42_Face_Init: cannot access `psaux' module\n" ));
error = T42_Err_Missing_Module;
goto Exit;
}
FT_TRACE2(( "Type 42 driver\n" ));
/* open the tokenizer, this will also check the font format */
error = T42_Open_Face( face );
if ( error )
goto Exit;
/* if we just wanted to check the format, leave successfully now */
if ( face_index < 0 )
goto Exit;
/* check the face index */
if ( face_index > 0 )
{
FT_ERROR(( "T42_Face_Init: invalid face index\n" ));
error = T42_Err_Invalid_Argument;
goto Exit;
}
/* Now load the font program into the face object */
/* Init the face object fields */
/* Now set up root face fields */
root->num_glyphs = type1->num_glyphs;
root->num_charmaps = 0;
root->face_index = 0;
root->face_flags = FT_FACE_FLAG_SCALABLE |
FT_FACE_FLAG_HORIZONTAL |
FT_FACE_FLAG_GLYPH_NAMES;
if ( info->is_fixed_pitch )
root->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;
/* We only set this flag if we have the patented bytecode interpreter. */
/* There are no known `tricky' Type42 fonts that could be loaded with */
/* the unpatented interpreter. */
root->face_flags |= FT_FACE_FLAG_HINTER;
/* XXX: TODO -- add kerning with .afm support */
/* get style name -- be careful, some broken fonts only */
/* have a `/FontName' dictionary entry! */
root->family_name = info->family_name;
/* assume "Regular" style if we don't know better */
root->style_name = (char *)"Regular";
if ( root->family_name )
{
char* full = info->full_name;
char* family = root->family_name;
if ( full )
{
while ( *full )
{
if ( *full == *family )
{
family++;
full++;
}
else
{
if ( *full == ' ' || *full == '-' )
full++;
else if ( *family == ' ' || *family == '-' )
family++;
else
{
if ( !*family )
root->style_name = full;
break;
}
}
}
}
}
else
{
/* do we have a `/FontName'? */
if ( type1->font_name )
root->family_name = type1->font_name;
}
/* no embedded bitmap support */
root->num_fixed_sizes = 0;
root->available_sizes = 0;
/* Load the TTF font embedded in the T42 font */
{
FT_Open_Args args;
args.flags = FT_OPEN_MEMORY;
args.memory_base = face->ttf_data;
args.memory_size = face->ttf_size;
if ( num_params )
{
args.flags |= FT_OPEN_PARAMS;
args.num_params = num_params;
args.params = params;
}
error = FT_Open_Face( FT_FACE_LIBRARY( face ),
&args, 0, &face->ttf_face );
}
if ( error )
goto Exit;
FT_Done_Size( face->ttf_face->size );
/* Ignore info in FontInfo dictionary and use the info from the */
/* loaded TTF font. The PostScript interpreter also ignores it. */
root->bbox = face->ttf_face->bbox;
root->units_per_EM = face->ttf_face->units_per_EM;
root->ascender = face->ttf_face->ascender;
root->descender = face->ttf_face->descender;
root->height = face->ttf_face->height;
root->max_advance_width = face->ttf_face->max_advance_width;
root->max_advance_height = face->ttf_face->max_advance_height;
root->underline_position = (FT_Short)info->underline_position;
root->underline_thickness = (FT_Short)info->underline_thickness;
/* compute style flags */
root->style_flags = 0;
if ( info->italic_angle )
root->style_flags |= FT_STYLE_FLAG_ITALIC;
if ( face->ttf_face->style_flags & FT_STYLE_FLAG_BOLD )
root->style_flags |= FT_STYLE_FLAG_BOLD;
if ( face->ttf_face->face_flags & FT_FACE_FLAG_VERTICAL )
root->face_flags |= FT_FACE_FLAG_VERTICAL;
{
if ( psnames )
{
FT_CharMapRec charmap;
T1_CMap_Classes cmap_classes = psaux->t1_cmap_classes;
FT_CMap_Class clazz;
charmap.face = root;
/* first of all, try to synthesize a Unicode charmap */
charmap.platform_id = TT_PLATFORM_MICROSOFT;
charmap.encoding_id = TT_MS_ID_UNICODE_CS;
charmap.encoding = FT_ENCODING_UNICODE;
error = FT_CMap_New( cmap_classes->unicode, NULL, &charmap, NULL );
if ( error && FT_Err_No_Unicode_Glyph_Name != error )
goto Exit;
error = FT_Err_Ok;
/* now, generate an Adobe Standard encoding when appropriate */
charmap.platform_id = TT_PLATFORM_ADOBE;
clazz = NULL;
switch ( type1->encoding_type )
{
case T1_ENCODING_TYPE_STANDARD:
charmap.encoding = FT_ENCODING_ADOBE_STANDARD;
charmap.encoding_id = TT_ADOBE_ID_STANDARD;
clazz = cmap_classes->standard;
break;
case T1_ENCODING_TYPE_EXPERT:
charmap.encoding = FT_ENCODING_ADOBE_EXPERT;
charmap.encoding_id = TT_ADOBE_ID_EXPERT;
clazz = cmap_classes->expert;
break;
case T1_ENCODING_TYPE_ARRAY:
charmap.encoding = FT_ENCODING_ADOBE_CUSTOM;
charmap.encoding_id = TT_ADOBE_ID_CUSTOM;
clazz = cmap_classes->custom;
break;
case T1_ENCODING_TYPE_ISOLATIN1:
charmap.encoding = FT_ENCODING_ADOBE_LATIN_1;
charmap.encoding_id = TT_ADOBE_ID_LATIN_1;
clazz = cmap_classes->unicode;
break;
default:
;
}
if ( clazz )
error = FT_CMap_New( clazz, NULL, &charmap, NULL );
#if 0
/* Select default charmap */
if ( root->num_charmaps )
root->charmap = root->charmaps[0];
#endif
}
}
Exit:
return error;
}
FT_LOCAL_DEF( void )
T42_Face_Done( FT_Face t42face )
{
T42_Face face = (T42_Face)t42face;
T1_Font type1;
PS_FontInfo info;
FT_Memory memory;
if ( !face )
return;
type1 = &face->type1;
info = &type1->font_info;
memory = face->root.memory;
/* delete internal ttf face prior to freeing face->ttf_data */
if ( face->ttf_face )
FT_Done_Face( face->ttf_face );
/* release font info strings */
FT_FREE( info->version );
FT_FREE( info->notice );
FT_FREE( info->full_name );
FT_FREE( info->family_name );
FT_FREE( info->weight );
/* release top dictionary */
FT_FREE( type1->charstrings_len );
FT_FREE( type1->charstrings );
FT_FREE( type1->glyph_names );
FT_FREE( type1->charstrings_block );
FT_FREE( type1->glyph_names_block );
FT_FREE( type1->encoding.char_index );
FT_FREE( type1->encoding.char_name );
FT_FREE( type1->font_name );
FT_FREE( face->ttf_data );
#if 0
/* release afm data if present */
if ( face->afm_data )
T1_Done_AFM( memory, (T1_AFM*)face->afm_data );
#endif
/* release unicode map, if any */
FT_FREE( face->unicode_map.maps );
face->unicode_map.num_maps = 0;
face->root.family_name = 0;
face->root.style_name = 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* T42_Driver_Init */
/* */
/* <Description> */
/* Initializes a given Type 42 driver object. */
/* */
/* <Input> */
/* driver :: A handle to the target driver object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
/* T42_Driver */
T42_Driver_Init( FT_Module module )
{
T42_Driver driver = (T42_Driver)module;
FT_Module ttmodule;
ttmodule = FT_Get_Module( module->library, "truetype" );
if ( !ttmodule )
{
FT_ERROR(( "T42_Driver_Init: cannot access `truetype' module\n" ));
return T42_Err_Missing_Module;
}
driver->ttclazz = (FT_Driver_Class)ttmodule->clazz;
return T42_Err_Ok;
}
FT_LOCAL_DEF( void )
T42_Driver_Done( FT_Module module )
{
FT_UNUSED( module );
}
FT_LOCAL_DEF( FT_Error )
/* T42_Size */
T42_Size_Init( FT_Size size )
{
T42_Size t42size = (T42_Size)size;
FT_Face face = size->face;
T42_Face t42face = (T42_Face)face;
FT_Size ttsize;
FT_Error error = T42_Err_Ok;
error = FT_New_Size( t42face->ttf_face, &ttsize );
t42size->ttsize = ttsize;
FT_Activate_Size( ttsize );
return error;
}
FT_LOCAL_DEF( FT_Error )
/* T42_Size */
T42_Size_Request( FT_Size t42size,
FT_Size_Request req )
{
T42_Size size = (T42_Size)t42size;
T42_Face face = (T42_Face)t42size->face;
FT_Error error;
FT_Activate_Size( size->ttsize );
error = FT_Request_Size( face->ttf_face, req );
if ( !error )
t42size->metrics = face->ttf_face->size->metrics;
return error;
}
FT_LOCAL_DEF( FT_Error )
/* T42_Size */
T42_Size_Select( FT_Size t42size,
FT_ULong strike_index )
{
T42_Size size = (T42_Size)t42size;
T42_Face face = (T42_Face)t42size->face;
FT_Error error;
FT_Activate_Size( size->ttsize );
error = FT_Select_Size( face->ttf_face, (FT_Int)strike_index );
if ( !error )
t42size->metrics = face->ttf_face->size->metrics;
return error;
}
FT_LOCAL_DEF( void )
/* T42_Size */
T42_Size_Done( FT_Size t42size )
{
T42_Size size = (T42_Size)t42size;
FT_Face face = t42size->face;
T42_Face t42face = (T42_Face)face;
FT_ListNode node;
node = FT_List_Find( &t42face->ttf_face->sizes_list, size->ttsize );
if ( node )
{
FT_Done_Size( size->ttsize );
size->ttsize = NULL;
}
}
FT_LOCAL_DEF( FT_Error )
/* T42_GlyphSlot */
T42_GlyphSlot_Init( FT_GlyphSlot t42slot )
{
T42_GlyphSlot slot = (T42_GlyphSlot)t42slot;
FT_Face face = t42slot->face;
T42_Face t42face = (T42_Face)face;
FT_GlyphSlot ttslot;
FT_Error error = T42_Err_Ok;
if ( face->glyph == NULL )
{
/* First glyph slot for this face */
slot->ttslot = t42face->ttf_face->glyph;
}
else
{
error = FT_New_GlyphSlot( t42face->ttf_face, &ttslot );
slot->ttslot = ttslot;
}
return error;
}
FT_LOCAL_DEF( void )
/* T42_GlyphSlot */
T42_GlyphSlot_Done( FT_GlyphSlot t42slot )
{
T42_GlyphSlot slot = (T42_GlyphSlot)t42slot;
FT_Done_GlyphSlot( slot->ttslot );
}
static void
t42_glyphslot_clear( FT_GlyphSlot slot )
{
/* free bitmap if needed */
ft_glyphslot_free_bitmap( slot );
/* clear all public fields in the glyph slot */
FT_ZERO( &slot->metrics );
FT_ZERO( &slot->outline );
FT_ZERO( &slot->bitmap );
slot->bitmap_left = 0;
slot->bitmap_top = 0;
slot->num_subglyphs = 0;
slot->subglyphs = 0;
slot->control_data = 0;
slot->control_len = 0;
slot->other = 0;
slot->format = FT_GLYPH_FORMAT_NONE;
slot->linearHoriAdvance = 0;
slot->linearVertAdvance = 0;
}
FT_LOCAL_DEF( FT_Error )
T42_GlyphSlot_Load( FT_GlyphSlot glyph,
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
T42_GlyphSlot t42slot = (T42_GlyphSlot)glyph;
T42_Size t42size = (T42_Size)size;
FT_Driver_Class ttclazz = ((T42_Driver)glyph->face->driver)->ttclazz;
t42_glyphslot_clear( t42slot->ttslot );
error = ttclazz->load_glyph( t42slot->ttslot,
t42size->ttsize,
glyph_index,
load_flags | FT_LOAD_NO_BITMAP );
if ( !error )
{
glyph->metrics = t42slot->ttslot->metrics;
glyph->linearHoriAdvance = t42slot->ttslot->linearHoriAdvance;
glyph->linearVertAdvance = t42slot->ttslot->linearVertAdvance;
glyph->format = t42slot->ttslot->format;
glyph->outline = t42slot->ttslot->outline;
glyph->bitmap = t42slot->ttslot->bitmap;
glyph->bitmap_left = t42slot->ttslot->bitmap_left;
glyph->bitmap_top = t42slot->ttslot->bitmap_top;
glyph->num_subglyphs = t42slot->ttslot->num_subglyphs;
glyph->subglyphs = t42slot->ttslot->subglyphs;
glyph->control_data = t42slot->ttslot->control_data;
glyph->control_len = t42slot->ttslot->control_len;
}
return error;
}
/* END */
/***************************************************************************/
/* */
/* t42parse.c */
/* */
/* Type 42 font parser (body). */
/* */
/* Copyright 2002-2012 by */
/* Roberto Alameda. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t42
static void
t42_parse_font_matrix( T42_Face face,
T42_Loader loader );
static void
t42_parse_encoding( T42_Face face,
T42_Loader loader );
static void
t42_parse_charstrings( T42_Face face,
T42_Loader loader );
static void
t42_parse_sfnts( T42_Face face,
T42_Loader loader );
/* as Type42 fonts have no Private dict, */
/* we set the last argument of T1_FIELD_XXX to 0 */
static const
T1_FieldRec t42_keywords[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE T1_FontInfo
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FONT_INFO
T1_FIELD_STRING( "version", version, 0 )
T1_FIELD_STRING( "Notice", notice, 0 )
T1_FIELD_STRING( "FullName", full_name, 0 )
T1_FIELD_STRING( "FamilyName", family_name, 0 )
T1_FIELD_STRING( "Weight", weight, 0 )
T1_FIELD_NUM ( "ItalicAngle", italic_angle, 0 )
T1_FIELD_BOOL ( "isFixedPitch", is_fixed_pitch, 0 )
T1_FIELD_NUM ( "UnderlinePosition", underline_position, 0 )
T1_FIELD_NUM ( "UnderlineThickness", underline_thickness, 0 )
#undef FT_STRUCTURE
#define FT_STRUCTURE PS_FontExtraRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FONT_EXTRA
T1_FIELD_NUM ( "FSType", fs_type, 0 )
#undef FT_STRUCTURE
#define FT_STRUCTURE T1_FontRec
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_FONT_DICT
T1_FIELD_KEY ( "FontName", font_name, 0 )
T1_FIELD_NUM ( "PaintType", paint_type, 0 )
T1_FIELD_NUM ( "FontType", font_type, 0 )
T1_FIELD_FIXED( "StrokeWidth", stroke_width, 0 )
#undef FT_STRUCTURE
#define FT_STRUCTURE FT_BBox
#undef T1CODE
#define T1CODE T1_FIELD_LOCATION_BBOX
T1_FIELD_BBOX("FontBBox", xMin, 0 )
T1_FIELD_CALLBACK( "FontMatrix", t42_parse_font_matrix, 0 )
T1_FIELD_CALLBACK( "Encoding", t42_parse_encoding, 0 )
T1_FIELD_CALLBACK( "CharStrings", t42_parse_charstrings, 0 )
T1_FIELD_CALLBACK( "sfnts", t42_parse_sfnts, 0 )
{ 0, T1_FIELD_LOCATION_CID_INFO, T1_FIELD_TYPE_NONE, 0, 0, 0, 0, 0, 0 }
};
#define T1_Add_Table( p, i, o, l ) (p)->funcs.add( (p), i, o, l )
#define T1_Done_Table( p ) \
do \
{ \
if ( (p)->funcs.done ) \
(p)->funcs.done( p ); \
} while ( 0 )
#define T1_Release_Table( p ) \
do \
{ \
if ( (p)->funcs.release ) \
(p)->funcs.release( p ); \
} while ( 0 )
#define T1_Skip_Spaces( p ) (p)->root.funcs.skip_spaces( &(p)->root )
#define T1_Skip_PS_Token( p ) (p)->root.funcs.skip_PS_token( &(p)->root )
#define T1_ToInt( p ) \
(p)->root.funcs.to_int( &(p)->root )
#define T1_ToBytes( p, b, m, n, d ) \
(p)->root.funcs.to_bytes( &(p)->root, b, m, n, d )
#define T1_ToFixedArray( p, m, f, t ) \
(p)->root.funcs.to_fixed_array( &(p)->root, m, f, t )
#define T1_ToToken( p, t ) \
(p)->root.funcs.to_token( &(p)->root, t )
#define T1_Load_Field( p, f, o, m, pf ) \
(p)->root.funcs.load_field( &(p)->root, f, o, m, pf )
#define T1_Load_Field_Table( p, f, o, m, pf ) \
(p)->root.funcs.load_field_table( &(p)->root, f, o, m, pf )
/********************* Parsing Functions ******************/
FT_LOCAL_DEF( FT_Error )
t42_parser_init( T42_Parser parser,
FT_Stream stream,
FT_Memory memory,
PSAux_Service psaux )
{
FT_Error error = T42_Err_Ok;
FT_Long size;
psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );
parser->stream = stream;
parser->base_len = 0;
parser->base_dict = 0;
parser->in_memory = 0;
/*******************************************************************/
/* */
/* Here a short summary of what is going on: */
/* */
/* When creating a new Type 42 parser, we try to locate and load */
/* the base dictionary, loading the whole font into memory. */
/* */
/* When `loading' the base dictionary, we only set up pointers */
/* in the case of a memory-based stream. Otherwise, we allocate */
/* and load the base dictionary in it. */
/* */
/* parser->in_memory is set if we have a memory stream. */
/* */
if ( FT_STREAM_SEEK( 0L ) ||
FT_FRAME_ENTER( 17 ) )
goto Exit;
if ( ft_memcmp( stream->cursor, "%!PS-TrueTypeFont", 17 ) != 0 )
{
FT_TRACE2(( " not a Type42 font\n" ));
error = T42_Err_Unknown_File_Format;
}
FT_FRAME_EXIT();
if ( error || FT_STREAM_SEEK( 0 ) )
goto Exit;
size = stream->size;
/* now, try to load `size' bytes of the `base' dictionary we */
/* found previously */
/* if it is a memory-based resource, set up pointers */
if ( !stream->read )
{
parser->base_dict = (FT_Byte*)stream->base + stream->pos;
parser->base_len = size;
parser->in_memory = 1;
/* check that the `size' field is valid */
if ( FT_STREAM_SKIP( size ) )
goto Exit;
}
else
{
/* read segment in memory */
if ( FT_ALLOC( parser->base_dict, size ) ||
FT_STREAM_READ( parser->base_dict, size ) )
goto Exit;
parser->base_len = size;
}
parser->root.base = parser->base_dict;
parser->root.cursor = parser->base_dict;
parser->root.limit = parser->root.cursor + parser->base_len;
Exit:
if ( error && !parser->in_memory )
FT_FREE( parser->base_dict );
return error;
}
FT_LOCAL_DEF( void )
t42_parser_done( T42_Parser parser )
{
FT_Memory memory = parser->root.memory;
/* free the base dictionary only when we have a disk stream */
if ( !parser->in_memory )
FT_FREE( parser->base_dict );
parser->root.funcs.done( &parser->root );
}
static int
t42_is_space( FT_Byte c )
{
return ( c == ' ' || c == '\t' ||
c == '\r' || c == '\n' || c == '\f' ||
c == '\0' );
}
static void
t42_parse_font_matrix( T42_Face face,
T42_Loader loader )
{
T42_Parser parser = &loader->parser;
FT_Matrix* matrix = &face->type1.font_matrix;
FT_Vector* offset = &face->type1.font_offset;
FT_Face root = (FT_Face)&face->root;
FT_Fixed temp[6];
FT_Fixed temp_scale;
(void)T1_ToFixedArray( parser, 6, temp, 3 );
temp_scale = FT_ABS( temp[3] );
/* Set Units per EM based on FontMatrix values. We set the value to */
/* 1000 / temp_scale, because temp_scale was already multiplied by */
/* 1000 (in t1_tofixed, from psobjs.c). */
root->units_per_EM = (FT_UShort)FT_DivFix( 1000, temp_scale );
/* we need to scale the values by 1.0/temp_scale */
if ( temp_scale != 0x10000L )
{
temp[0] = FT_DivFix( temp[0], temp_scale );
temp[1] = FT_DivFix( temp[1], temp_scale );
temp[2] = FT_DivFix( temp[2], temp_scale );
temp[4] = FT_DivFix( temp[4], temp_scale );
temp[5] = FT_DivFix( temp[5], temp_scale );
temp[3] = 0x10000L;
}
matrix->xx = temp[0];
matrix->yx = temp[1];
matrix->xy = temp[2];
matrix->yy = temp[3];
/* note that the offsets must be expressed in integer font units */
offset->x = temp[4] >> 16;
offset->y = temp[5] >> 16;
}
static void
t42_parse_encoding( T42_Face face,
T42_Loader loader )
{
T42_Parser parser = &loader->parser;
FT_Byte* cur;
FT_Byte* limit = parser->root.limit;
PSAux_Service psaux = (PSAux_Service)face->psaux;
T1_Skip_Spaces( parser );
cur = parser->root.cursor;
if ( cur >= limit )
{
FT_ERROR(( "t42_parse_encoding: out of bounds\n" ));
parser->root.error = T42_Err_Invalid_File_Format;
return;
}
/* if we have a number or `[', the encoding is an array, */
/* and we must load it now */
if ( ft_isdigit( *cur ) || *cur == '[' )
{
T1_Encoding encode = &face->type1.encoding;
FT_UInt count, n;
PS_Table char_table = &loader->encoding_table;
FT_Memory memory = parser->root.memory;
FT_Error error;
FT_Bool only_immediates = 0;
/* read the number of entries in the encoding; should be 256 */
if ( *cur == '[' )
{
count = 256;
only_immediates = 1;
parser->root.cursor++;
}
else
count = (FT_UInt)T1_ToInt( parser );
T1_Skip_Spaces( parser );
if ( parser->root.cursor >= limit )
return;
/* we use a T1_Table to store our charnames */
loader->num_chars = encode->num_chars = count;
if ( FT_NEW_ARRAY( encode->char_index, count ) ||
FT_NEW_ARRAY( encode->char_name, count ) ||
FT_SET_ERROR( psaux->ps_table_funcs->init(
char_table, count, memory ) ) )
{
parser->root.error = error;
return;
}
/* We need to `zero' out encoding_table.elements */
for ( n = 0; n < count; n++ )
{
char* notdef = (char *)".notdef";
T1_Add_Table( char_table, n, notdef, 8 );
}
/* Now we need to read records of the form */
/* */
/* ... charcode /charname ... */
/* */
/* for each entry in our table. */
/* */
/* We simply look for a number followed by an immediate */
/* name. Note that this ignores correctly the sequence */
/* that is often seen in type42 fonts: */
/* */
/* 0 1 255 { 1 index exch /.notdef put } for dup */
/* */
/* used to clean the encoding array before anything else. */
/* */
/* Alternatively, if the array is directly given as */
/* */
/* /Encoding [ ... ] */
/* */
/* we only read immediates. */
n = 0;
T1_Skip_Spaces( parser );
while ( parser->root.cursor < limit )
{
cur = parser->root.cursor;
/* we stop when we encounter `def' or `]' */
if ( *cur == 'd' && cur + 3 < limit )
{
if ( cur[1] == 'e' &&
cur[2] == 'f' &&
t42_is_space( cur[3] ) )
{
FT_TRACE6(( "encoding end\n" ));
cur += 3;
break;
}
}
if ( *cur == ']' )
{
FT_TRACE6(( "encoding end\n" ));
cur++;
break;
}
/* check whether we have found an entry */
if ( ft_isdigit( *cur ) || only_immediates )
{
FT_Int charcode;
if ( only_immediates )
charcode = n;
else
{
charcode = (FT_Int)T1_ToInt( parser );
T1_Skip_Spaces( parser );
}
cur = parser->root.cursor;
if ( *cur == '/' && cur + 2 < limit && n < count )
{
FT_PtrDist len;
cur++;
parser->root.cursor = cur;
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
len = parser->root.cursor - cur;
parser->root.error = T1_Add_Table( char_table, charcode,
cur, len + 1 );
if ( parser->root.error )
return;
char_table->elements[charcode][len] = '\0';
n++;
}
}
else
{
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
}
T1_Skip_Spaces( parser );
}
face->type1.encoding_type = T1_ENCODING_TYPE_ARRAY;
parser->root.cursor = cur;
}
/* Otherwise, we should have either `StandardEncoding', */
/* `ExpertEncoding', or `ISOLatin1Encoding' */
else
{
if ( cur + 17 < limit &&
ft_strncmp( (const char*)cur, "StandardEncoding", 16 ) == 0 )
face->type1.encoding_type = T1_ENCODING_TYPE_STANDARD;
else if ( cur + 15 < limit &&
ft_strncmp( (const char*)cur, "ExpertEncoding", 14 ) == 0 )
face->type1.encoding_type = T1_ENCODING_TYPE_EXPERT;
else if ( cur + 18 < limit &&
ft_strncmp( (const char*)cur, "ISOLatin1Encoding", 17 ) == 0 )
face->type1.encoding_type = T1_ENCODING_TYPE_ISOLATIN1;
else
{
FT_ERROR(( "t42_parse_encoding: invalid token\n" ));
parser->root.error = T42_Err_Invalid_File_Format;
}
}
}
typedef enum T42_Load_Status_
{
BEFORE_START,
BEFORE_TABLE_DIR,
OTHER_TABLES
} T42_Load_Status;
static void
t42_parse_sfnts( T42_Face face,
T42_Loader loader )
{
T42_Parser parser = &loader->parser;
FT_Memory memory = parser->root.memory;
FT_Byte* cur;
FT_Byte* limit = parser->root.limit;
FT_Error error;
FT_Int num_tables = 0;
FT_ULong count, ttf_size = 0;
FT_Long n, string_size, old_string_size, real_size;
FT_Byte* string_buf = NULL;
FT_Bool allocated = 0;
T42_Load_Status status;
/* The format is */
/* */
/* /sfnts [ <hexstring> <hexstring> ... ] def */
/* */
/* or */
/* */
/* /sfnts [ */
/* <num_bin_bytes> RD <binary data> */
/* <num_bin_bytes> RD <binary data> */
/* ... */
/* ] def */
/* */
/* with exactly one space after the `RD' token. */
T1_Skip_Spaces( parser );
if ( parser->root.cursor >= limit || *parser->root.cursor++ != '[' )
{
FT_ERROR(( "t42_parse_sfnts: can't find begin of sfnts vector\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
T1_Skip_Spaces( parser );
status = BEFORE_START;
string_size = 0;
old_string_size = 0;
count = 0;
while ( parser->root.cursor < limit )
{
cur = parser->root.cursor;
if ( *cur == ']' )
{
parser->root.cursor++;
goto Exit;
}
else if ( *cur == '<' )
{
T1_Skip_PS_Token( parser );
if ( parser->root.error )
goto Exit;
/* don't include delimiters */
string_size = (FT_Long)( ( parser->root.cursor - cur - 2 + 1 ) / 2 );
if ( FT_REALLOC( string_buf, old_string_size, string_size ) )
goto Fail;
allocated = 1;
parser->root.cursor = cur;
(void)T1_ToBytes( parser, string_buf, string_size, &real_size, 1 );
old_string_size = string_size;
string_size = real_size;
}
else if ( ft_isdigit( *cur ) )
{
if ( allocated )
{
FT_ERROR(( "t42_parse_sfnts: "
"can't handle mixed binary and hex strings\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
string_size = T1_ToInt( parser );
if ( string_size < 0 )
{
FT_ERROR(( "t42_parse_sfnts: invalid string size\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
/* `RD' */
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
/* one space after `RD' */
string_buf = parser->root.cursor + 1;
if ( limit - parser->root.cursor < string_size )
{
FT_ERROR(( "t42_parse_sfnts: too many binary data\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
else
parser->root.cursor += string_size + 1;
}
if ( !string_buf )
{
FT_ERROR(( "t42_parse_sfnts: invalid data in sfnts array\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
/* A string can have a trailing zero (odd) byte for padding. */
/* Ignore it. */
if ( ( string_size & 1 ) && string_buf[string_size - 1] == 0 )
string_size--;
if ( !string_size )
{
FT_ERROR(( "t42_parse_sfnts: invalid string\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
for ( n = 0; n < string_size; n++ )
{
switch ( status )
{
case BEFORE_START:
/* load offset table, 12 bytes */
if ( count < 12 )
{
face->ttf_data[count++] = string_buf[n];
continue;
}
else
{
num_tables = 16 * face->ttf_data[4] + face->ttf_data[5];
status = BEFORE_TABLE_DIR;
ttf_size = 12 + 16 * num_tables;
if ( FT_REALLOC( face->ttf_data, 12, ttf_size ) )
goto Fail;
}
/* fall through */
case BEFORE_TABLE_DIR:
/* the offset table is read; read the table directory */
if ( count < ttf_size )
{
face->ttf_data[count++] = string_buf[n];
continue;
}
else
{
int i;
FT_ULong len;
for ( i = 0; i < num_tables; i++ )
{
FT_Byte* p = face->ttf_data + 12 + 16 * i + 12;
len = FT_PEEK_ULONG( p );
/* Pad to a 4-byte boundary length */
ttf_size += ( len + 3 ) & ~3;
}
status = OTHER_TABLES;
face->ttf_size = ttf_size;
/* there are no more than 256 tables, so no size check here */
if ( FT_REALLOC( face->ttf_data, 12 + 16 * num_tables,
ttf_size + 1 ) )
goto Fail;
}
/* fall through */
case OTHER_TABLES:
/* all other tables are just copied */
if ( count >= ttf_size )
{
FT_ERROR(( "t42_parse_sfnts: too many binary data\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
face->ttf_data[count++] = string_buf[n];
}
}
T1_Skip_Spaces( parser );
}
/* if control reaches this point, the format was not valid */
error = T42_Err_Invalid_File_Format;
Fail:
parser->root.error = error;
Exit:
if ( allocated )
FT_FREE( string_buf );
}
static void
t42_parse_charstrings( T42_Face face,
T42_Loader loader )
{
T42_Parser parser = &loader->parser;
PS_Table code_table = &loader->charstrings;
PS_Table name_table = &loader->glyph_names;
PS_Table swap_table = &loader->swap_table;
FT_Memory memory = parser->root.memory;
FT_Error error;
PSAux_Service psaux = (PSAux_Service)face->psaux;
FT_Byte* cur;
FT_Byte* limit = parser->root.limit;
FT_UInt n;
FT_UInt notdef_index = 0;
FT_Byte notdef_found = 0;
T1_Skip_Spaces( parser );
if ( parser->root.cursor >= limit )
{
FT_ERROR(( "t42_parse_charstrings: out of bounds\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
if ( ft_isdigit( *parser->root.cursor ) )
{
loader->num_glyphs = (FT_UInt)T1_ToInt( parser );
if ( parser->root.error )
return;
}
else if ( *parser->root.cursor == '<' )
{
/* We have `<< ... >>'. Count the number of `/' in the dictionary */
/* to get its size. */
FT_UInt count = 0;
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
T1_Skip_Spaces( parser );
cur = parser->root.cursor;
while ( parser->root.cursor < limit )
{
if ( *parser->root.cursor == '/' )
count++;
else if ( *parser->root.cursor == '>' )
{
loader->num_glyphs = count;
/* rewind */
parser->root.cursor = cur;
break;
}
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
T1_Skip_Spaces( parser );
}
}
else
{
FT_ERROR(( "t42_parse_charstrings: invalid token\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
if ( parser->root.cursor >= limit )
{
FT_ERROR(( "t42_parse_charstrings: out of bounds\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
/* initialize tables */
error = psaux->ps_table_funcs->init( code_table,
loader->num_glyphs,
memory );
if ( error )
goto Fail;
error = psaux->ps_table_funcs->init( name_table,
loader->num_glyphs,
memory );
if ( error )
goto Fail;
/* Initialize table for swapping index notdef_index and */
/* index 0 names and codes (if necessary). */
error = psaux->ps_table_funcs->init( swap_table, 4, memory );
if ( error )
goto Fail;
n = 0;
for (;;)
{
/* The format is simple: */
/* `/glyphname' + index [+ def] */
T1_Skip_Spaces( parser );
cur = parser->root.cursor;
if ( cur >= limit )
break;
/* We stop when we find an `end' keyword or '>' */
if ( *cur == 'e' &&
cur + 3 < limit &&
cur[1] == 'n' &&
cur[2] == 'd' &&
t42_is_space( cur[3] ) )
break;
if ( *cur == '>' )
break;
T1_Skip_PS_Token( parser );
if ( parser->root.error )
return;
if ( *cur == '/' )
{
FT_PtrDist len;
if ( cur + 1 >= limit )
{
FT_ERROR(( "t42_parse_charstrings: out of bounds\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
/* skip `/' */
cur++;
len = parser->root.cursor - cur;
error = T1_Add_Table( name_table, n, cur, len + 1 );
if ( error )
goto Fail;
/* add a trailing zero to the name table */
name_table->elements[n][len] = '\0';
/* record index of /.notdef */
if ( *cur == '.' &&
ft_strcmp( ".notdef",
(const char*)(name_table->elements[n]) ) == 0 )
{
notdef_index = n;
notdef_found = 1;
}
T1_Skip_Spaces( parser );
cur = parser->root.cursor;
(void)T1_ToInt( parser );
if ( parser->root.cursor >= limit )
{
FT_ERROR(( "t42_parse_charstrings: out of bounds\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
len = parser->root.cursor - cur;
error = T1_Add_Table( code_table, n, cur, len + 1 );
if ( error )
goto Fail;
code_table->elements[n][len] = '\0';
n++;
if ( n >= loader->num_glyphs )
break;
}
}
loader->num_glyphs = n;
if ( !notdef_found )
{
FT_ERROR(( "t42_parse_charstrings: no /.notdef glyph\n" ));
error = T42_Err_Invalid_File_Format;
goto Fail;
}
/* if /.notdef does not occupy index 0, do our magic. */
if ( ft_strcmp( (const char*)".notdef",
(const char*)name_table->elements[0] ) )
{
/* Swap glyph in index 0 with /.notdef glyph. First, add index 0 */
/* name and code entries to swap_table. Then place notdef_index */
/* name and code entries into swap_table. Then swap name and code */
/* entries at indices notdef_index and 0 using values stored in */
/* swap_table. */
/* Index 0 name */
error = T1_Add_Table( swap_table, 0,
name_table->elements[0],
name_table->lengths [0] );
if ( error )
goto Fail;
/* Index 0 code */
error = T1_Add_Table( swap_table, 1,
code_table->elements[0],
code_table->lengths [0] );
if ( error )
goto Fail;
/* Index notdef_index name */
error = T1_Add_Table( swap_table, 2,
name_table->elements[notdef_index],
name_table->lengths [notdef_index] );
if ( error )
goto Fail;
/* Index notdef_index code */
error = T1_Add_Table( swap_table, 3,
code_table->elements[notdef_index],
code_table->lengths [notdef_index] );
if ( error )
goto Fail;
error = T1_Add_Table( name_table, notdef_index,
swap_table->elements[0],
swap_table->lengths [0] );
if ( error )
goto Fail;
error = T1_Add_Table( code_table, notdef_index,
swap_table->elements[1],
swap_table->lengths [1] );
if ( error )
goto Fail;
error = T1_Add_Table( name_table, 0,
swap_table->elements[2],
swap_table->lengths [2] );
if ( error )
goto Fail;
error = T1_Add_Table( code_table, 0,
swap_table->elements[3],
swap_table->lengths [3] );
if ( error )
goto Fail;
}
return;
Fail:
parser->root.error = error;
}
static FT_Error
t42_load_keyword( T42_Face face,
T42_Loader loader,
T1_Field field )
{
FT_Error error;
void* dummy_object;
void** objects;
FT_UInt max_objects = 0;
/* if the keyword has a dedicated callback, call it */
if ( field->type == T1_FIELD_TYPE_CALLBACK )
{
field->reader( (FT_Face)face, loader );
error = loader->parser.root.error;
goto Exit;
}
/* now the keyword is either a simple field or a table of fields; */
/* we are now going to take care of it */
switch ( field->location )
{
case T1_FIELD_LOCATION_FONT_INFO:
dummy_object = &face->type1.font_info;
break;
case T1_FIELD_LOCATION_FONT_EXTRA:
dummy_object = &face->type1.font_extra;
break;
case T1_FIELD_LOCATION_BBOX:
dummy_object = &face->type1.font_bbox;
break;
default:
dummy_object = &face->type1;
}
objects = &dummy_object;
if ( field->type == T1_FIELD_TYPE_INTEGER_ARRAY ||
field->type == T1_FIELD_TYPE_FIXED_ARRAY )
error = T1_Load_Field_Table( &loader->parser, field,
objects, max_objects, 0 );
else
error = T1_Load_Field( &loader->parser, field,
objects, max_objects, 0 );
Exit:
return error;
}
FT_LOCAL_DEF( FT_Error )
t42_parse_dict( T42_Face face,
T42_Loader loader,
FT_Byte* base,
FT_Long size )
{
T42_Parser parser = &loader->parser;
FT_Byte* limit;
FT_Int n_keywords = (FT_Int)( sizeof ( t42_keywords ) /
sizeof ( t42_keywords[0] ) );
parser->root.cursor = base;
parser->root.limit = base + size;
parser->root.error = T42_Err_Ok;
limit = parser->root.limit;
T1_Skip_Spaces( parser );
while ( parser->root.cursor < limit )
{
FT_Byte* cur;
cur = parser->root.cursor;
/* look for `FontDirectory' which causes problems for some fonts */
if ( *cur == 'F' && cur + 25 < limit &&
ft_strncmp( (char*)cur, "FontDirectory", 13 ) == 0 )
{
FT_Byte* cur2;
/* skip the `FontDirectory' keyword */
T1_Skip_PS_Token( parser );
T1_Skip_Spaces ( parser );
cur = cur2 = parser->root.cursor;
/* look up the `known' keyword */
while ( cur < limit )
{
if ( *cur == 'k' && cur + 5 < limit &&
ft_strncmp( (char*)cur, "known", 5 ) == 0 )
break;
T1_Skip_PS_Token( parser );
if ( parser->root.error )
goto Exit;
T1_Skip_Spaces ( parser );
cur = parser->root.cursor;
}
if ( cur < limit )
{
T1_TokenRec token;
/* skip the `known' keyword and the token following it */
T1_Skip_PS_Token( parser );
T1_ToToken( parser, &token );
/* if the last token was an array, skip it! */
if ( token.type == T1_TOKEN_TYPE_ARRAY )
cur2 = parser->root.cursor;
}
parser->root.cursor = cur2;
}
/* look for immediates */
else if ( *cur == '/' && cur + 2 < limit )
{
FT_PtrDist len;
cur++;
parser->root.cursor = cur;
T1_Skip_PS_Token( parser );
if ( parser->root.error )
goto Exit;
len = parser->root.cursor - cur;
if ( len > 0 && len < 22 && parser->root.cursor < limit )
{
int i;
/* now compare the immediate name to the keyword table */
/* loop through all known keywords */
for ( i = 0; i < n_keywords; i++ )
{
T1_Field keyword = (T1_Field)&t42_keywords[i];
FT_Byte *name = (FT_Byte*)keyword->ident;
if ( !name )
continue;
if ( cur[0] == name[0] &&
len == (FT_PtrDist)ft_strlen( (const char *)name ) &&
ft_memcmp( cur, name, len ) == 0 )
{
/* we found it -- run the parsing callback! */
parser->root.error = t42_load_keyword( face,
loader,
keyword );
if ( parser->root.error )
return parser->root.error;
break;
}
}
}
}
else
{
T1_Skip_PS_Token( parser );
if ( parser->root.error )
goto Exit;
}
T1_Skip_Spaces( parser );
}
Exit:
return parser->root.error;
}
FT_LOCAL_DEF( void )
t42_loader_init( T42_Loader loader,
T42_Face face )
{
FT_UNUSED( face );
FT_MEM_ZERO( loader, sizeof ( *loader ) );
loader->num_glyphs = 0;
loader->num_chars = 0;
/* initialize the tables -- simply set their `init' field to 0 */
loader->encoding_table.init = 0;
loader->charstrings.init = 0;
loader->glyph_names.init = 0;
}
FT_LOCAL_DEF( void )
t42_loader_done( T42_Loader loader )
{
T42_Parser parser = &loader->parser;
/* finalize tables */
T1_Release_Table( &loader->encoding_table );
T1_Release_Table( &loader->charstrings );
T1_Release_Table( &loader->glyph_names );
T1_Release_Table( &loader->swap_table );
/* finalize parser */
t42_parser_done( parser );
}
/* END */
/***************************************************************************/
/* */
/* t42drivr.c */
/* */
/* High-level Type 42 driver interface (body). */
/* */
/* Copyright 2002-2004, 2006, 2007, 2009, 2011 by Roberto Alameda. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This driver implements Type42 fonts as described in the */
/* Technical Note #5012 from Adobe, with these limitations: */
/* */
/* 1) CID Fonts are not currently supported. */
/* 2) Incremental fonts making use of the GlyphDirectory keyword */
/* will be loaded, but the rendering will be using the TrueType */
/* tables. */
/* 3) As for Type1 fonts, CDevProc is not supported. */
/* 4) The Metrics dictionary is not supported. */
/* 5) AFM metrics are not supported. */
/* */
/* In other words, this driver supports Type42 fonts derived from */
/* TrueType fonts in a non-CID manner, as done by usual conversion */
/* programs. */
/* */
/*************************************************************************/
/***************************************************************************/
/* */
/* t42drivr.h */
/* */
/* High-level Type 42 driver interface (specification). */
/* */
/* Copyright 2002 by Roberto Alameda. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __T42DRIVR_H__
FT_BEGIN_HEADER
FT_EXPORT_VAR( const FT_Driver_ClassRec ) t42_driver_class;
FT_END_HEADER
/* END */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t42
/*
*
* GLYPH DICT SERVICE
*
*/
static FT_Error
t42_get_glyph_name( T42_Face face,
FT_UInt glyph_index,
FT_Pointer buffer,
FT_UInt buffer_max )
{
FT_STRCPYN( buffer, face->type1.glyph_names[glyph_index], buffer_max );
return T42_Err_Ok;
}
static FT_UInt
t42_get_name_index( T42_Face face,
FT_String* glyph_name )
{
FT_Int i;
FT_String* gname;
for ( i = 0; i < face->type1.num_glyphs; i++ )
{
gname = face->type1.glyph_names[i];
if ( glyph_name[0] == gname[0] && !ft_strcmp( glyph_name, gname ) )
return (FT_UInt)ft_atol( (const char *)face->type1.charstrings[i] );
}
return 0;
}
static const FT_Service_GlyphDictRec t42_service_glyph_dict =
{
(FT_GlyphDict_GetNameFunc) t42_get_glyph_name,
(FT_GlyphDict_NameIndexFunc)t42_get_name_index
};
/*
*
* POSTSCRIPT NAME SERVICE
*
*/
static const char*
t42_get_ps_font_name( T42_Face face )
{
return (const char*)face->type1.font_name;
}
static const FT_Service_PsFontNameRec t42_service_ps_font_name =
{
(FT_PsName_GetFunc)t42_get_ps_font_name
};
/*
*
* POSTSCRIPT INFO SERVICE
*
*/
static FT_Error
t42_ps_get_font_info( FT_Face face,
PS_FontInfoRec* afont_info )
{
*afont_info = ((T42_Face)face)->type1.font_info;
return T42_Err_Ok;
}
static FT_Error
t42_ps_get_font_extra( FT_Face face,
PS_FontExtraRec* afont_extra )
{
*afont_extra = ((T42_Face)face)->type1.font_extra;
return T42_Err_Ok;
}
static FT_Int
t42_ps_has_glyph_names( FT_Face face )
{
FT_UNUSED( face );
return 1;
}
static FT_Error
t42_ps_get_font_private( FT_Face face,
PS_PrivateRec* afont_private )
{
*afont_private = ((T42_Face)face)->type1.private_dict;
return T42_Err_Ok;
}
static const FT_Service_PsInfoRec t42_service_ps_info =
{
(PS_GetFontInfoFunc) t42_ps_get_font_info,
(PS_GetFontExtraFunc) t42_ps_get_font_extra,
(PS_HasGlyphNamesFunc) t42_ps_has_glyph_names,
(PS_GetFontPrivateFunc)t42_ps_get_font_private,
/* not implemented */
(PS_GetFontValueFunc) NULL
};
/*
*
* SERVICE LIST
*
*/
static const FT_ServiceDescRec t42_services[] =
{
{ FT_SERVICE_ID_GLYPH_DICT, &t42_service_glyph_dict },
{ FT_SERVICE_ID_POSTSCRIPT_FONT_NAME, &t42_service_ps_font_name },
{ FT_SERVICE_ID_POSTSCRIPT_INFO, &t42_service_ps_info },
{ FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_TYPE_42 },
{ NULL, NULL }
};
FT_CALLBACK_DEF( FT_Module_Interface )
T42_Get_Interface( FT_Module module,
const FT_String* t42_interface )
{
FT_UNUSED( module );
return ft_service_list_lookup( t42_services, t42_interface );
}
const FT_Driver_ClassRec t42_driver_class =
{
{
FT_MODULE_FONT_DRIVER |
FT_MODULE_DRIVER_SCALABLE |
FT_MODULE_DRIVER_HAS_HINTER,
sizeof ( T42_DriverRec ),
"type42",
0x10000L,
0x20000L,
/* format interface */
0,
T42_Driver_Init,
T42_Driver_Done,
T42_Get_Interface,
},
sizeof ( T42_FaceRec ),
sizeof ( T42_SizeRec ),
sizeof ( T42_GlyphSlotRec ),
T42_Face_Init,
T42_Face_Done,
T42_Size_Init,
T42_Size_Done,
T42_GlyphSlot_Init,
T42_GlyphSlot_Done,
T42_GlyphSlot_Load,
/* FT_Face_GetKerningFunc */
0,
/* FT_Face_AttachFunc */
0,
/* FT_Face_GetAdvancesFunc */
0,
T42_Size_Request,
T42_Size_Select
};
/* END */
/* END */
/***************************************************************************/
/* */
/* winfnt.c */
/* */
/* FreeType font driver for Windows FNT/FON files */
/* */
/* Copyright 1996-2004, 2006-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* Copyright 2003 Huw D M Davies for Codeweavers */
/* Copyright 2007 Dmitry Timoshkov for Codeweavers */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* winfnt.h */
/* */
/* FreeType font driver for Windows FNT/FON files */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* Copyright 2007 Dmitry Timoshkov for Codeweavers */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __WINFNT_H__
FT_BEGIN_HEADER
typedef struct WinMZ_HeaderRec_
{
FT_UShort magic;
/* skipped content */
FT_UShort lfanew;
} WinMZ_HeaderRec;
typedef struct WinNE_HeaderRec_
{
FT_UShort magic;
/* skipped content */
FT_UShort resource_tab_offset;
FT_UShort rname_tab_offset;
} WinNE_HeaderRec;
typedef struct WinPE32_HeaderRec_
{
FT_ULong magic;
FT_UShort machine;
FT_UShort number_of_sections;
/* skipped content */
FT_UShort size_of_optional_header;
/* skipped content */
FT_UShort magic32;
/* skipped content */
FT_ULong rsrc_virtual_address;
FT_ULong rsrc_size;
/* skipped content */
} WinPE32_HeaderRec;
typedef struct WinPE32_SectionRec_
{
FT_Byte name[8];
/* skipped content */
FT_ULong virtual_address;
FT_ULong size_of_raw_data;
FT_ULong pointer_to_raw_data;
/* skipped content */
} WinPE32_SectionRec;
typedef struct WinPE_RsrcDirRec_
{
FT_ULong characteristics;
FT_ULong time_date_stamp;
FT_UShort major_version;
FT_UShort minor_version;
FT_UShort number_of_named_entries;
FT_UShort number_of_id_entries;
} WinPE_RsrcDirRec;
typedef struct WinPE_RsrcDirEntryRec_
{
FT_ULong name;
FT_ULong offset;
} WinPE_RsrcDirEntryRec;
typedef struct WinPE_RsrcDataEntryRec_
{
FT_ULong offset_to_data;
FT_ULong size;
FT_ULong code_page;
FT_ULong reserved;
} WinPE_RsrcDataEntryRec;
typedef struct WinNameInfoRec_
{
FT_UShort offset;
FT_UShort length;
FT_UShort flags;
FT_UShort id;
FT_UShort handle;
FT_UShort usage;
} WinNameInfoRec;
typedef struct WinResourceInfoRec_
{
FT_UShort type_id;
FT_UShort count;
} WinResourceInfoRec;
#define WINFNT_MZ_MAGIC 0x5A4D
#define WINFNT_NE_MAGIC 0x454E
#define WINFNT_PE_MAGIC 0x4550
typedef struct FNT_FontRec_
{
FT_ULong offset;
FT_WinFNT_HeaderRec header;
FT_Byte* fnt_frame;
FT_ULong fnt_size;
FT_String* family_name;
} FNT_FontRec, *FNT_Font;
typedef struct FNT_FaceRec_
{
FT_FaceRec root;
FNT_Font font;
FT_CharMap charmap_handle;
/* a single charmap per face */
FT_CharMapRec charmap;
} FNT_FaceRec, *FNT_Face;
FT_EXPORT_VAR( const FT_Driver_ClassRec ) winfnt_driver_class;
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* fnterrs.h */
/* */
/* Win FNT/FON error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the Windows FNT/FON error enumeration */
/* constants. */
/* */
/*************************************************************************/
#define __FNTERRS_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX FNT_Err_
#define FT_ERR_BASE FT_Mod_Err_Winfonts
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_winfnt
static const FT_Frame_Field winmz_header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE WinMZ_HeaderRec
FT_FRAME_START( 64 ),
FT_FRAME_USHORT_LE ( magic ),
FT_FRAME_SKIP_BYTES( 29 * 2 ),
FT_FRAME_ULONG_LE ( lfanew ),
FT_FRAME_END
};
static const FT_Frame_Field winne_header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE WinNE_HeaderRec
FT_FRAME_START( 40 ),
FT_FRAME_USHORT_LE ( magic ),
FT_FRAME_SKIP_BYTES( 34 ),
FT_FRAME_USHORT_LE ( resource_tab_offset ),
FT_FRAME_USHORT_LE ( rname_tab_offset ),
FT_FRAME_END
};
static const FT_Frame_Field winpe32_header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE WinPE32_HeaderRec
FT_FRAME_START( 248 ),
/* PE00 */
FT_FRAME_ULONG_LE ( magic ),
/* 0x014c - i386 */
FT_FRAME_USHORT_LE ( machine ),
FT_FRAME_USHORT_LE ( number_of_sections ),
FT_FRAME_SKIP_BYTES( 12 ),
FT_FRAME_USHORT_LE ( size_of_optional_header ),
FT_FRAME_SKIP_BYTES( 2 ),
/* 0x10b */
FT_FRAME_USHORT_LE ( magic32 ),
FT_FRAME_SKIP_BYTES( 110 ),
FT_FRAME_ULONG_LE ( rsrc_virtual_address ),
FT_FRAME_ULONG_LE ( rsrc_size ),
FT_FRAME_SKIP_BYTES( 104 ),
FT_FRAME_END
};
static const FT_Frame_Field winpe32_section_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE WinPE32_SectionRec
FT_FRAME_START( 40 ),
FT_FRAME_BYTES ( name, 8 ),
FT_FRAME_SKIP_BYTES( 4 ),
FT_FRAME_ULONG_LE ( virtual_address ),
FT_FRAME_ULONG_LE ( size_of_raw_data ),
FT_FRAME_ULONG_LE ( pointer_to_raw_data ),
FT_FRAME_SKIP_BYTES( 16 ),
FT_FRAME_END
};
static const FT_Frame_Field winpe_rsrc_dir_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE WinPE_RsrcDirRec
FT_FRAME_START( 16 ),
FT_FRAME_ULONG_LE ( characteristics ),
FT_FRAME_ULONG_LE ( time_date_stamp ),
FT_FRAME_USHORT_LE( major_version ),
FT_FRAME_USHORT_LE( minor_version ),
FT_FRAME_USHORT_LE( number_of_named_entries ),
FT_FRAME_USHORT_LE( number_of_id_entries ),
FT_FRAME_END
};
static const FT_Frame_Field winpe_rsrc_dir_entry_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE WinPE_RsrcDirEntryRec
FT_FRAME_START( 8 ),
FT_FRAME_ULONG_LE( name ),
FT_FRAME_ULONG_LE( offset ),
FT_FRAME_END
};
static const FT_Frame_Field winpe_rsrc_data_entry_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE WinPE_RsrcDataEntryRec
FT_FRAME_START( 16 ),
FT_FRAME_ULONG_LE( offset_to_data ),
FT_FRAME_ULONG_LE( size ),
FT_FRAME_ULONG_LE( code_page ),
FT_FRAME_ULONG_LE( reserved ),
FT_FRAME_END
};
static const FT_Frame_Field winfnt_header_fields[] =
{
#undef FT_STRUCTURE
#define FT_STRUCTURE FT_WinFNT_HeaderRec
FT_FRAME_START( 148 ),
FT_FRAME_USHORT_LE( version ),
FT_FRAME_ULONG_LE ( file_size ),
FT_FRAME_BYTES ( copyright, 60 ),
FT_FRAME_USHORT_LE( file_type ),
FT_FRAME_USHORT_LE( nominal_point_size ),
FT_FRAME_USHORT_LE( vertical_resolution ),
FT_FRAME_USHORT_LE( horizontal_resolution ),
FT_FRAME_USHORT_LE( ascent ),
FT_FRAME_USHORT_LE( internal_leading ),
FT_FRAME_USHORT_LE( external_leading ),
FT_FRAME_BYTE ( italic ),
FT_FRAME_BYTE ( underline ),
FT_FRAME_BYTE ( strike_out ),
FT_FRAME_USHORT_LE( weight ),
FT_FRAME_BYTE ( charset ),
FT_FRAME_USHORT_LE( pixel_width ),
FT_FRAME_USHORT_LE( pixel_height ),
FT_FRAME_BYTE ( pitch_and_family ),
FT_FRAME_USHORT_LE( avg_width ),
FT_FRAME_USHORT_LE( max_width ),
FT_FRAME_BYTE ( first_char ),
FT_FRAME_BYTE ( last_char ),
FT_FRAME_BYTE ( default_char ),
FT_FRAME_BYTE ( break_char ),
FT_FRAME_USHORT_LE( bytes_per_row ),
FT_FRAME_ULONG_LE ( device_offset ),
FT_FRAME_ULONG_LE ( face_name_offset ),
FT_FRAME_ULONG_LE ( bits_pointer ),
FT_FRAME_ULONG_LE ( bits_offset ),
FT_FRAME_BYTE ( reserved ),
FT_FRAME_ULONG_LE ( flags ),
FT_FRAME_USHORT_LE( A_space ),
FT_FRAME_USHORT_LE( B_space ),
FT_FRAME_USHORT_LE( C_space ),
FT_FRAME_ULONG_LE ( color_table_offset ),
FT_FRAME_BYTES ( reserved1, 16 ),
FT_FRAME_END
};
static void
fnt_font_done( FNT_Face face )
{
FT_Memory memory = FT_FACE( face )->memory;
FT_Stream stream = FT_FACE( face )->stream;
FNT_Font font = face->font;
if ( !font )
return;
if ( font->fnt_frame )
FT_FRAME_RELEASE( font->fnt_frame );
FT_FREE( font->family_name );
FT_FREE( font );
face->font = 0;
}
static FT_Error
fnt_font_load( FNT_Font font,
FT_Stream stream )
{
FT_Error error;
FT_WinFNT_Header header = &font->header;
FT_Bool new_format;
FT_UInt size;
/* first of all, read the FNT header */
if ( FT_STREAM_SEEK( font->offset ) ||
FT_STREAM_READ_FIELDS( winfnt_header_fields, header ) )
goto Exit;
/* check header */
if ( header->version != 0x200 &&
header->version != 0x300 )
{
FT_TRACE2(( " not a Windows FNT file\n" ));
error = FNT_Err_Unknown_File_Format;
goto Exit;
}
new_format = FT_BOOL( font->header.version == 0x300 );
size = new_format ? 148 : 118;
if ( header->file_size < size )
{
FT_TRACE2(( " not a Windows FNT file\n" ));
error = FNT_Err_Unknown_File_Format;
goto Exit;
}
/* Version 2 doesn't have these fields */
if ( header->version == 0x200 )
{
header->flags = 0;
header->A_space = 0;
header->B_space = 0;
header->C_space = 0;
header->color_table_offset = 0;
}
if ( header->file_type & 1 )
{
FT_TRACE2(( "[can't handle vector FNT fonts]\n" ));
error = FNT_Err_Unknown_File_Format;
goto Exit;
}
/* this is a FNT file/table; extract its frame */
if ( FT_STREAM_SEEK( font->offset ) ||
FT_FRAME_EXTRACT( header->file_size, font->fnt_frame ) )
goto Exit;
Exit:
return error;
}
static FT_Error
fnt_face_get_dll_font( FNT_Face face,
FT_Int face_index )
{
FT_Error error;
FT_Stream stream = FT_FACE( face )->stream;
FT_Memory memory = FT_FACE( face )->memory;
WinMZ_HeaderRec mz_header;
face->font = 0;
/* does it begin with an MZ header? */
if ( FT_STREAM_SEEK( 0 ) ||
FT_STREAM_READ_FIELDS( winmz_header_fields, &mz_header ) )
goto Exit;
error = FNT_Err_Unknown_File_Format;
if ( mz_header.magic == WINFNT_MZ_MAGIC )
{
/* yes, now look for an NE header in the file */
WinNE_HeaderRec ne_header;
FT_TRACE2(( "MZ signature found\n" ));
if ( FT_STREAM_SEEK( mz_header.lfanew ) ||
FT_STREAM_READ_FIELDS( winne_header_fields, &ne_header ) )
goto Exit;
error = FNT_Err_Unknown_File_Format;
if ( ne_header.magic == WINFNT_NE_MAGIC )
{
/* good, now look into the resource table for each FNT resource */
FT_ULong res_offset = mz_header.lfanew +
ne_header.resource_tab_offset;
FT_UShort size_shift;
FT_UShort font_count = 0;
FT_ULong font_offset = 0;
FT_TRACE2(( "NE signature found\n" ));
if ( FT_STREAM_SEEK( res_offset ) ||
FT_FRAME_ENTER( ne_header.rname_tab_offset -
ne_header.resource_tab_offset ) )
goto Exit;
size_shift = FT_GET_USHORT_LE();
for (;;)
{
FT_UShort type_id, count;
type_id = FT_GET_USHORT_LE();
if ( !type_id )
break;
count = FT_GET_USHORT_LE();
if ( type_id == 0x8008U )
{
font_count = count;
font_offset = (FT_ULong)( FT_STREAM_POS() + 4 +
( stream->cursor - stream->limit ) );
break;
}
stream->cursor += 4 + count * 12;
}
FT_FRAME_EXIT();
if ( !font_count || !font_offset )
{
FT_TRACE2(( "this file doesn't contain any FNT resources\n" ));
error = FNT_Err_Invalid_File_Format;
goto Exit;
}
/* loading `winfnt_header_fields' needs at least 118 bytes; */
/* use this as a rough measure to check the expected font size */
if ( font_count * 118UL > stream->size )
{
FT_TRACE2(( "invalid number of faces\n" ));
error = FNT_Err_Invalid_File_Format;
goto Exit;
}
face->root.num_faces = font_count;
if ( face_index >= font_count )
{
error = FNT_Err_Invalid_Argument;
goto Exit;
}
else if ( face_index < 0 )
goto Exit;
if ( FT_NEW( face->font ) )
goto Exit;
if ( FT_STREAM_SEEK( font_offset + face_index * 12 ) ||
FT_FRAME_ENTER( 12 ) )
goto Fail;
face->font->offset = (FT_ULong)FT_GET_USHORT_LE() << size_shift;
face->font->fnt_size = (FT_ULong)FT_GET_USHORT_LE() << size_shift;
stream->cursor += 8;
FT_FRAME_EXIT();
error = fnt_font_load( face->font, stream );
}
else if ( ne_header.magic == WINFNT_PE_MAGIC )
{
WinPE32_HeaderRec pe32_header;
WinPE32_SectionRec pe32_section;
WinPE_RsrcDirRec root_dir, name_dir, lang_dir;
WinPE_RsrcDirEntryRec dir_entry1, dir_entry2, dir_entry3;
WinPE_RsrcDataEntryRec data_entry;
FT_Long root_dir_offset, name_dir_offset, lang_dir_offset;
FT_UShort i, j, k;
FT_TRACE2(( "PE signature found\n" ));
if ( FT_STREAM_SEEK( mz_header.lfanew ) ||
FT_STREAM_READ_FIELDS( winpe32_header_fields, &pe32_header ) )
goto Exit;
FT_TRACE2(( "magic %04lx, machine %02x, number_of_sections %u, "
"size_of_optional_header %02x\n"
"magic32 %02x, rsrc_virtual_address %04lx, "
"rsrc_size %04lx\n",
pe32_header.magic, pe32_header.machine,
pe32_header.number_of_sections,
pe32_header.size_of_optional_header,
pe32_header.magic32, pe32_header.rsrc_virtual_address,
pe32_header.rsrc_size ));
/* check full signature */ if ( pe32_header.magic != WINFNT_PE_MAGIC ||
/* i386 */ pe32_header.machine != 0x014c ||
/* FIXME */ pe32_header.size_of_optional_header != 0xe0 ||
pe32_header.magic32 != 0x10b )
{
FT_TRACE2(( "this file has an invalid PE header\n" ));
error = FNT_Err_Invalid_File_Format;
goto Exit;
}
face->root.num_faces = 0;
for ( i = 0; i < pe32_header.number_of_sections; i++ )
{
if ( FT_STREAM_READ_FIELDS( winpe32_section_fields,
&pe32_section ) )
goto Exit;
FT_TRACE2(( "name %.8s, va %04lx, size %04lx, offset %04lx\n",
pe32_section.name, pe32_section.virtual_address,
pe32_section.size_of_raw_data,
pe32_section.pointer_to_raw_data ));
if ( pe32_header.rsrc_virtual_address ==
pe32_section.virtual_address )
goto Found_rsrc_section;
}
FT_TRACE2(( "this file doesn't contain any resources\n" ));
error = FNT_Err_Invalid_File_Format;
goto Exit;
Found_rsrc_section:
FT_TRACE2(( "found resources section %.8s\n", pe32_section.name ));
if ( FT_STREAM_SEEK( pe32_section.pointer_to_raw_data ) ||
FT_STREAM_READ_FIELDS( winpe_rsrc_dir_fields, &root_dir ) )
goto Exit;
root_dir_offset = pe32_section.pointer_to_raw_data;
for ( i = 0; i < root_dir.number_of_named_entries +
root_dir.number_of_id_entries; i++ )
{
if ( FT_STREAM_SEEK( root_dir_offset + 16 + i * 8 ) ||
FT_STREAM_READ_FIELDS( winpe_rsrc_dir_entry_fields,
&dir_entry1 ) )
goto Exit;
/* DataIsDirectory */ if ( !(dir_entry1.offset & 0x80000000UL ) )
{
error = FNT_Err_Invalid_File_Format;
goto Exit;
}
dir_entry1.offset &= ~0x80000000UL;
name_dir_offset = pe32_section.pointer_to_raw_data +
dir_entry1.offset;
if ( FT_STREAM_SEEK( pe32_section.pointer_to_raw_data +
dir_entry1.offset ) ||
FT_STREAM_READ_FIELDS( winpe_rsrc_dir_fields, &name_dir ) )
goto Exit;
for ( j = 0; j < name_dir.number_of_named_entries +
name_dir.number_of_id_entries; j++ )
{
if ( FT_STREAM_SEEK( name_dir_offset + 16 + j * 8 ) ||
FT_STREAM_READ_FIELDS( winpe_rsrc_dir_entry_fields,
&dir_entry2 ) )
goto Exit;
/* DataIsDirectory */ if ( !(dir_entry2.offset & 0x80000000UL ) )
{
error = FNT_Err_Invalid_File_Format;
goto Exit;
}
dir_entry2.offset &= ~0x80000000UL;
lang_dir_offset = pe32_section.pointer_to_raw_data +
dir_entry2.offset;
if ( FT_STREAM_SEEK( pe32_section.pointer_to_raw_data +
dir_entry2.offset ) ||
FT_STREAM_READ_FIELDS( winpe_rsrc_dir_fields, &lang_dir ) )
goto Exit;
for ( k = 0; k < lang_dir.number_of_named_entries +
lang_dir.number_of_id_entries; k++ )
{
if ( FT_STREAM_SEEK( lang_dir_offset + 16 + k * 8 ) ||
FT_STREAM_READ_FIELDS( winpe_rsrc_dir_entry_fields,
&dir_entry3 ) )
goto Exit;
/* DataIsDirectory */ if ( dir_entry2.offset & 0x80000000UL )
{
error = FNT_Err_Invalid_File_Format;
goto Exit;
}
/* RT_FONT */ if ( dir_entry1.name == 8 )
{
if ( FT_STREAM_SEEK( root_dir_offset + dir_entry3.offset ) ||
FT_STREAM_READ_FIELDS( winpe_rsrc_data_entry_fields,
&data_entry ) )
goto Exit;
FT_TRACE2(( "found font #%lu, offset %04lx, "
"size %04lx, cp %lu\n",
dir_entry2.name,
pe32_section.pointer_to_raw_data +
data_entry.offset_to_data -
pe32_section.virtual_address,
data_entry.size, data_entry.code_page ));
if ( face_index == face->root.num_faces )
{
if ( FT_NEW( face->font ) )
goto Exit;
face->font->offset = pe32_section.pointer_to_raw_data +
data_entry.offset_to_data -
pe32_section.virtual_address;
face->font->fnt_size = data_entry.size;
error = fnt_font_load( face->font, stream );
if ( error )
{
FT_TRACE2(( "font #%lu load error %d\n",
dir_entry2.name, error ));
goto Fail;
}
else
FT_TRACE2(( "font #%lu successfully loaded\n",
dir_entry2.name ));
}
face->root.num_faces++;
}
}
}
}
}
if ( !face->root.num_faces )
{
FT_TRACE2(( "this file doesn't contain any RT_FONT resources\n" ));
error = FNT_Err_Invalid_File_Format;
goto Exit;
}
if ( face_index >= face->root.num_faces )
{
error = FNT_Err_Invalid_Argument;
goto Exit;
}
}
Fail:
if ( error )
fnt_font_done( face );
Exit:
return error;
}
typedef struct FNT_CMapRec_
{
FT_CMapRec cmap;
FT_UInt32 first;
FT_UInt32 count;
} FNT_CMapRec, *FNT_CMap;
static FT_Error
fnt_cmap_init( FNT_CMap cmap )
{
FNT_Face face = (FNT_Face)FT_CMAP_FACE( cmap );
FNT_Font font = face->font;
cmap->first = (FT_UInt32) font->header.first_char;
cmap->count = (FT_UInt32)( font->header.last_char - cmap->first + 1 );
return 0;
}
static FT_UInt
fnt_cmap_char_index( FNT_CMap cmap,
FT_UInt32 char_code )
{
FT_UInt gindex = 0;
char_code -= cmap->first;
if ( char_code < cmap->count )
/* we artificially increase the glyph index; */
/* FNT_Load_Glyph reverts to the right one */
gindex = (FT_UInt)( char_code + 1 );
return gindex;
}
static FT_UInt32
fnt_cmap_char_next( FNT_CMap cmap,
FT_UInt32 *pchar_code )
{
FT_UInt gindex = 0;
FT_UInt32 result = 0;
FT_UInt32 char_code = *pchar_code + 1;
if ( char_code <= cmap->first )
{
result = cmap->first;
gindex = 1;
}
else
{
char_code -= cmap->first;
if ( char_code < cmap->count )
{
result = cmap->first + char_code;
gindex = (FT_UInt)( char_code + 1 );
}
}
*pchar_code = result;
return gindex;
}
static const FT_CMap_ClassRec fnt_cmap_class_rec =
{
sizeof ( FNT_CMapRec ),
(FT_CMap_InitFunc) fnt_cmap_init,
(FT_CMap_DoneFunc) NULL,
(FT_CMap_CharIndexFunc)fnt_cmap_char_index,
(FT_CMap_CharNextFunc) fnt_cmap_char_next,
NULL, NULL, NULL, NULL, NULL
};
static FT_CMap_Class const fnt_cmap_class = &fnt_cmap_class_rec;
static void
/* FNT_Face */
FNT_Face_Done( FT_Face fntface )
{
FNT_Face face = (FNT_Face)fntface;
FT_Memory memory;
if ( !face )
return;
memory = FT_FACE_MEMORY( face );
fnt_font_done( face );
FT_FREE( fntface->available_sizes );
fntface->num_fixed_sizes = 0;
}
static FT_Error
FNT_Face_Init( FT_Stream stream,
/* FNT_Face */
FT_Face fntface,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params )
{
FNT_Face face = (FNT_Face)fntface;
FT_Error error;
FT_Memory memory = FT_FACE_MEMORY( face );
FT_UNUSED( num_params );
FT_UNUSED( params );
FT_TRACE2(( "Windows FNT driver\n" ));
/* try to load font from a DLL */
error = fnt_face_get_dll_font( face, face_index );
if ( !error && face_index < 0 )
goto Exit;
if ( error == FNT_Err_Unknown_File_Format )
{
/* this didn't work; try to load a single FNT font */
FNT_Font font;
if ( FT_NEW( face->font ) )
goto Exit;
fntface->num_faces = 1;
font = face->font;
font->offset = 0;
font->fnt_size = stream->size;
error = fnt_font_load( font, stream );
if ( !error )
{
if ( face_index > 0 )
error = FNT_Err_Invalid_Argument;
else if ( face_index < 0 )
goto Exit;
}
}
if ( error )
goto Fail;
/* we now need to fill the root FT_Face fields */
/* with relevant information */
{
FT_Face root = FT_FACE( face );
FNT_Font font = face->font;
FT_PtrDist family_size;
root->face_index = face_index;
root->face_flags = FT_FACE_FLAG_FIXED_SIZES |
FT_FACE_FLAG_HORIZONTAL;
if ( font->header.avg_width == font->header.max_width )
root->face_flags |= FT_FACE_FLAG_FIXED_WIDTH;
if ( font->header.italic )
root->style_flags |= FT_STYLE_FLAG_ITALIC;
if ( font->header.weight >= 800 )
root->style_flags |= FT_STYLE_FLAG_BOLD;
/* set up the `fixed_sizes' array */
if ( FT_NEW_ARRAY( root->available_sizes, 1 ) )
goto Fail;
root->num_fixed_sizes = 1;
{
FT_Bitmap_Size* bsize = root->available_sizes;
FT_UShort x_res, y_res;
bsize->width = font->header.avg_width;
bsize->height = (FT_Short)(
font->header.pixel_height + font->header.external_leading );
bsize->size = font->header.nominal_point_size << 6;
x_res = font->header.horizontal_resolution;
if ( !x_res )
x_res = 72;
y_res = font->header.vertical_resolution;
if ( !y_res )
y_res = 72;
bsize->y_ppem = FT_MulDiv( bsize->size, y_res, 72 );
bsize->y_ppem = FT_PIX_ROUND( bsize->y_ppem );
/*
* this reads:
*
* the nominal height is larger than the bbox's height
*
* => nominal_point_size contains incorrect value;
* use pixel_height as the nominal height
*/
if ( bsize->y_ppem > ( font->header.pixel_height << 6 ) )
{
FT_TRACE2(( "use pixel_height as the nominal height\n" ));
bsize->y_ppem = font->header.pixel_height << 6;
bsize->size = FT_MulDiv( bsize->y_ppem, 72, y_res );
}
bsize->x_ppem = FT_MulDiv( bsize->size, x_res, 72 );
bsize->x_ppem = FT_PIX_ROUND( bsize->x_ppem );
}
{
FT_CharMapRec charmap;
charmap.encoding = FT_ENCODING_NONE;
/* initial platform/encoding should indicate unset status? */
charmap.platform_id = TT_PLATFORM_APPLE_UNICODE;
charmap.encoding_id = TT_APPLE_ID_DEFAULT;
charmap.face = root;
if ( font->header.charset == FT_WinFNT_ID_MAC )
{
charmap.encoding = FT_ENCODING_APPLE_ROMAN;
charmap.platform_id = TT_PLATFORM_MACINTOSH;
/* charmap.encoding_id = TT_MAC_ID_ROMAN; */
}
error = FT_CMap_New( fnt_cmap_class,
NULL,
&charmap,
NULL );
if ( error )
goto Fail;
/* Select default charmap */
if ( root->num_charmaps )
root->charmap = root->charmaps[0];
}
/* set up remaining flags */
if ( font->header.last_char < font->header.first_char )
{
FT_TRACE2(( "invalid number of glyphs\n" ));
error = FNT_Err_Invalid_File_Format;
goto Fail;
}
/* reserve one slot for the .notdef glyph at index 0 */
root->num_glyphs = font->header.last_char -
font->header.first_char + 1 + 1;
if ( font->header.face_name_offset >= font->header.file_size )
{
FT_TRACE2(( "invalid family name offset\n" ));
error = FNT_Err_Invalid_File_Format;
goto Fail;
}
family_size = font->header.file_size - font->header.face_name_offset;
/* Some broken fonts don't delimit the face name with a final */
/* NULL byte -- the frame is erroneously one byte too small. */
/* We thus allocate one more byte, setting it explicitly to */
/* zero. */
if ( FT_ALLOC( font->family_name, family_size + 1 ) )
goto Fail;
FT_MEM_COPY( font->family_name,
font->fnt_frame + font->header.face_name_offset,
family_size );
font->family_name[family_size] = '\0';
if ( FT_REALLOC( font->family_name,
family_size,
ft_strlen( font->family_name ) + 1 ) )
goto Fail;
root->family_name = font->family_name;
root->style_name = (char *)"Regular";
if ( root->style_flags & FT_STYLE_FLAG_BOLD )
{
if ( root->style_flags & FT_STYLE_FLAG_ITALIC )
root->style_name = (char *)"Bold Italic";
else
root->style_name = (char *)"Bold";
}
else if ( root->style_flags & FT_STYLE_FLAG_ITALIC )
root->style_name = (char *)"Italic";
}
goto Exit;
Fail:
FNT_Face_Done( fntface );
Exit:
return error;
}
static FT_Error
FNT_Size_Select( FT_Size size,
FT_ULong strike_index )
{
FNT_Face face = (FNT_Face)size->face;
FT_WinFNT_Header header = &face->font->header;
FT_UNUSED( strike_index );
FT_Select_Metrics( size->face, 0 );
size->metrics.ascender = header->ascent * 64;
size->metrics.descender = -( header->pixel_height -
header->ascent ) * 64;
size->metrics.max_advance = header->max_width * 64;
return FNT_Err_Ok;
}
static FT_Error
FNT_Size_Request( FT_Size size,
FT_Size_Request req )
{
FNT_Face face = (FNT_Face)size->face;
FT_WinFNT_Header header = &face->font->header;
FT_Bitmap_Size* bsize = size->face->available_sizes;
FT_Error error = FNT_Err_Invalid_Pixel_Size;
FT_Long height;
height = FT_REQUEST_HEIGHT( req );
height = ( height + 32 ) >> 6;
switch ( req->type )
{
case FT_SIZE_REQUEST_TYPE_NOMINAL:
if ( height == ( ( bsize->y_ppem + 32 ) >> 6 ) )
error = FNT_Err_Ok;
break;
case FT_SIZE_REQUEST_TYPE_REAL_DIM:
if ( height == header->pixel_height )
error = FNT_Err_Ok;
break;
default:
error = FNT_Err_Unimplemented_Feature;
break;
}
if ( error )
return error;
else
return FNT_Size_Select( size, 0 );
}
static FT_Error
FNT_Load_Glyph( FT_GlyphSlot slot,
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FNT_Face face = (FNT_Face)FT_SIZE_FACE( size );
FNT_Font font;
FT_Error error = FNT_Err_Ok;
FT_Byte* p;
FT_Int len;
FT_Bitmap* bitmap = &slot->bitmap;
FT_ULong offset;
FT_Bool new_format;
FT_UNUSED( load_flags );
if ( !face )
{
error = FNT_Err_Invalid_Argument;
goto Exit;
}
font = face->font;
if ( !font ||
glyph_index >= (FT_UInt)( FT_FACE( face )->num_glyphs ) )
{
error = FNT_Err_Invalid_Argument;
goto Exit;
}
if ( glyph_index > 0 )
/* revert to real index */
glyph_index--;
else
/* the .notdef glyph */
glyph_index = font->header.default_char;
new_format = FT_BOOL( font->header.version == 0x300 );
len = new_format ? 6 : 4;
/* jump to glyph entry */
p = font->fnt_frame + ( new_format ? 148 : 118 ) + len * glyph_index;
bitmap->width = FT_NEXT_SHORT_LE( p );
if ( new_format )
offset = FT_NEXT_ULONG_LE( p );
else
offset = FT_NEXT_USHORT_LE( p );
if ( offset >= font->header.file_size )
{
FT_TRACE2(( "invalid FNT offset\n" ));
error = FNT_Err_Invalid_File_Format;
goto Exit;
}
/* jump to glyph data */
/* font->header.bits_offset */ p = font->fnt_frame + + offset;
/* allocate and build bitmap */
{
FT_Memory memory = FT_FACE_MEMORY( slot->face );
FT_Int pitch = ( bitmap->width + 7 ) >> 3;
FT_Byte* column;
FT_Byte* write;
bitmap->pitch = pitch;
bitmap->rows = font->header.pixel_height;
bitmap->pixel_mode = FT_PIXEL_MODE_MONO;
if ( offset + pitch * bitmap->rows >= font->header.file_size )
{
FT_TRACE2(( "invalid bitmap width\n" ));
error = FNT_Err_Invalid_File_Format;
goto Exit;
}
/* note: since glyphs are stored in columns and not in rows we */
/* can't use ft_glyphslot_set_bitmap */
if ( FT_ALLOC_MULT( bitmap->buffer, pitch, bitmap->rows ) )
goto Exit;
column = (FT_Byte*)bitmap->buffer;
for ( ; pitch > 0; pitch--, column++ )
{
FT_Byte* limit = p + bitmap->rows;
for ( write = column; p < limit; p++, write += bitmap->pitch )
*write = *p;
}
}
slot->internal->flags = FT_GLYPH_OWN_BITMAP;
slot->bitmap_left = 0;
slot->bitmap_top = font->header.ascent;
slot->format = FT_GLYPH_FORMAT_BITMAP;
/* now set up metrics */
slot->metrics.width = bitmap->width << 6;
slot->metrics.height = bitmap->rows << 6;
slot->metrics.horiAdvance = bitmap->width << 6;
slot->metrics.horiBearingX = 0;
slot->metrics.horiBearingY = slot->bitmap_top << 6;
ft_synthesize_vertical_metrics( &slot->metrics,
bitmap->rows << 6 );
Exit:
return error;
}
static FT_Error
winfnt_get_header( FT_Face face,
FT_WinFNT_HeaderRec *aheader )
{
FNT_Font font = ((FNT_Face)face)->font;
*aheader = font->header;
return 0;
}
static const FT_Service_WinFntRec winfnt_service_rec =
{
winfnt_get_header
};
/*
* SERVICE LIST
*
*/
static const FT_ServiceDescRec winfnt_services[] =
{
{ FT_SERVICE_ID_XF86_NAME, FT_XF86_FORMAT_WINFNT },
{ FT_SERVICE_ID_WINFNT, &winfnt_service_rec },
{ NULL, NULL }
};
static FT_Module_Interface
winfnt_get_service( FT_Module module,
const FT_String* service_id )
{
FT_UNUSED( module );
return ft_service_list_lookup( winfnt_services, service_id );
}
FT_CALLBACK_TABLE_DEF
const FT_Driver_ClassRec winfnt_driver_class =
{
{
FT_MODULE_FONT_DRIVER |
FT_MODULE_DRIVER_NO_OUTLINES,
sizeof ( FT_DriverRec ),
"winfonts",
0x10000L,
0x20000L,
0,
/* FT_Module_Constructor */
0,
/* FT_Module_Destructor */
0,
winfnt_get_service
},
sizeof ( FNT_FaceRec ),
sizeof ( FT_SizeRec ),
sizeof ( FT_GlyphSlotRec ),
FNT_Face_Init,
FNT_Face_Done,
/* FT_Size_InitFunc */
0,
/* FT_Size_DoneFunc */
0,
/* FT_Slot_InitFunc */
0,
/* FT_Slot_DoneFunc */
0,
FNT_Load_Glyph,
/* FT_Face_GetKerningFunc */
0,
/* FT_Face_AttachFunc */
0,
/* FT_Face_GetAdvancesFunc */
0,
FNT_Size_Request,
FNT_Size_Select
};
/* END */
/***************************************************************************/
/* */
/* raster.c */
/* */
/* FreeType monochrome rasterer module component (body only). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* rastpic.c */
/* */
/* The FreeType position independent code services for raster module. */
/* */
/* Copyright 2009, 2010, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* rastpic.h */
/* */
/* The FreeType position independent code services for raster module. */
/* */
/* Copyright 2009 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __RASTPIC_H__
FT_BEGIN_HEADER
#define FT_STANDARD_RASTER_GET ft_standard_raster
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* rasterrs.h */
/* */
/* monochrome renderer error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the monochrome renderer error enumeration */
/* constants. */
/* */
/*************************************************************************/
#define __RASTERRS_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX Raster_Err_
#define FT_ERR_BASE FT_Mod_Err_Raster
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/* END */
/***************************************************************************/
/* */
/* ftraster.c */
/* */
/* The FreeType glyph rasterizer (body). */
/* */
/* Copyright 1996-2003, 2005, 2007-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file can be compiled without the rest of the FreeType engine, by */
/* defining the _STANDALONE_ macro when compiling it. You also need to */
/* put the files `ftimage.h' and `ftmisc.h' into the $(incdir) */
/* directory. Typically, you should do something like */
/* */
/* - copy `src/raster/ftraster.c' (this file) to your current directory */
/* */
/* - copy `include/freetype/ftimage.h' and `src/raster/ftmisc.h' */
/* to your current directory */
/* */
/* - compile `ftraster' with the _STANDALONE_ macro defined, as in */
/* */
/* cc -c -D_STANDALONE_ ftraster.c */
/* */
/* The renderer can be initialized with a call to */
/* `ft_standard_raster.raster_new'; a bitmap can be generated */
/* with a call to `ft_standard_raster.raster_render'. */
/* */
/* See the comments and documentation in the file `ftimage.h' for more */
/* details on how the raster works. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* This is a rewrite of the FreeType 1.x scan-line converter */
/* */
/*************************************************************************/
#ifdef _STANDALONE_
#define FT_CONFIG_STANDARD_LIBRARY_H <stdlib.h>
/* for memset */
#include <string.h>
/***************************************************************************/
/* */
/* ftmisc.h */
/* */
/* Miscellaneous macros for stand-alone rasterizer (specification */
/* only). */
/* */
/* Copyright 2005, 2009, 2010 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used */
/* modified and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************/
/* */
/* This file is *not* portable! You have to adapt */
/* its definitions to your platform. */
/* */
/***************************************************/
#define __FTMISC_H__
/* memset */
#define FT_BEGIN_HEADER
#define FT_END_HEADER
#define FT_LOCAL_DEF( x ) static x
/* from include/freetype2/fttypes.h */
typedef unsigned char FT_Byte;
typedef signed int FT_Int;
typedef unsigned int FT_UInt;
typedef signed long FT_Long;
typedef unsigned long FT_ULong;
typedef signed long FT_F26Dot6;
typedef int FT_Error;
#define FT_MAKE_TAG( _x1, _x2, _x3, _x4 ) \
( ( (FT_ULong)_x1 << 24 ) | \
( (FT_ULong)_x2 << 16 ) | \
( (FT_ULong)_x3 << 8 ) | \
(FT_ULong)_x4 )
/* from include/freetype2/ftsystem.h */
typedef struct FT_MemoryRec_* FT_Memory;
typedef void* (*FT_Alloc_Func)( FT_Memory memory,
long size );
typedef void (*FT_Free_Func)( FT_Memory memory,
void* block );
typedef void* (*FT_Realloc_Func)( FT_Memory memory,
long cur_size,
long new_size,
void* block );
typedef struct FT_MemoryRec_
{
void* user;
FT_Alloc_Func alloc;
FT_Free_Func free;
FT_Realloc_Func realloc;
} FT_MemoryRec;
/* from src/ftcalc.c */
#if ( defined _WIN32 || defined _WIN64 )
typedef __int64 FT_Int64;
#else
#include "inttypes.h"
typedef int64_t FT_Int64;
#endif
static FT_Long
FT_MulDiv( FT_Long a,
FT_Long b,
FT_Long c )
{
FT_Int s;
FT_Long d;
s = 1;
if ( a < 0 ) { a = -a; s = -1; }
if ( b < 0 ) { b = -b; s = -s; }
if ( c < 0 ) { c = -c; s = -s; }
d = (FT_Long)( c > 0 ? ( (FT_Int64)a * b + ( c >> 1 ) ) / c
: 0x7FFFFFFFL );
return ( s > 0 ) ? d : -d;
}
static FT_Long
FT_MulDiv_No_Round( FT_Long a,
FT_Long b,
FT_Long c )
{
FT_Int s;
FT_Long d;
s = 1;
if ( a < 0 ) { a = -a; s = -1; }
if ( b < 0 ) { b = -b; s = -s; }
if ( c < 0 ) { c = -c; s = -s; }
d = (FT_Long)( c > 0 ? (FT_Int64)a * b / c
: 0x7FFFFFFFL );
return ( s > 0 ) ? d : -d;
}
/* END */
#include "ftimage.h"
/* !_STANDALONE_ */
#else
/***************************************************************************/
/* */
/* ftraster.h */
/* */
/* The FreeType glyph rasterizer (specification). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used */
/* modified and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTRASTER_H__
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* Uncomment the following line if you are using ftraster.c as a */
/* standalone module, fully independent of FreeType. */
/* */
/* #define _STANDALONE_ */
FT_EXPORT_VAR( const FT_Raster_Funcs ) ft_standard_raster;
FT_END_HEADER
/* END */
/* for FT_MulDiv and FT_MulDiv_No_Round */
/* !_STANDALONE_ */
#endif
/*************************************************************************/
/* */
/* A simple technical note on how the raster works */
/* ----------------------------------------------- */
/* */
/* Converting an outline into a bitmap is achieved in several steps: */
/* */
/* 1 - Decomposing the outline into successive `profiles'. Each */
/* profile is simply an array of scanline intersections on a given */
/* dimension. A profile's main attributes are */
/* */
/* o its scanline position boundaries, i.e. `Ymin' and `Ymax' */
/* */
/* o an array of intersection coordinates for each scanline */
/* between `Ymin' and `Ymax' */
/* */
/* o a direction, indicating whether it was built going `up' or */
/* `down', as this is very important for filling rules */
/* */
/* o its drop-out mode */
/* */
/* 2 - Sweeping the target map's scanlines in order to compute segment */
/* `spans' which are then filled. Additionally, this pass */
/* performs drop-out control. */
/* */
/* The outline data is parsed during step 1 only. The profiles are */
/* built from the bottom of the render pool, used as a stack. The */
/* following graphics shows the profile list under construction: */
/* */
/* __________________________________________________________ _ _ */
/* | | | | | */
/* | profile | coordinates for | profile | coordinates for |--> */
/* | 1 | profile 1 | 2 | profile 2 |--> */
/* |_________|_________________|_________|_________________|__ _ _ */
/* */
/* ^ ^ */
/* | | */
/* start of render pool top */
/* */
/* The top of the profile stack is kept in the `top' variable. */
/* */
/* As you can see, a profile record is pushed on top of the render */
/* pool, which is then followed by its coordinates/intersections. If */
/* a change of direction is detected in the outline, a new profile is */
/* generated until the end of the outline. */
/* */
/* Note that when all profiles have been generated, the function */
/* Finalize_Profile_Table() is used to record, for each profile, its */
/* bottom-most scanline as well as the scanline above its upmost */
/* boundary. These positions are called `y-turns' because they (sort */
/* of) correspond to local extrema. They are stored in a sorted list */
/* built from the top of the render pool as a downwards stack: */
/* */
/* _ _ _______________________________________ */
/* | | */
/* <--| sorted list of | */
/* <--| extrema scanlines | */
/* _ _ __________________|____________________| */
/* */
/* ^ ^ */
/* | | */
/* maxBuff sizeBuff = end of pool */
/* */
/* This list is later used during the sweep phase in order to */
/* optimize performance (see technical note on the sweep below). */
/* */
/* Of course, the raster detects whether the two stacks collide and */
/* handles the situation properly. */
/* */
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/** **/
/** CONFIGURATION MACROS **/
/** **/
/*************************************************************************/
/*************************************************************************/
/* define DEBUG_RASTER if you want to compile a debugging version */
/* #define DEBUG_RASTER */
/* define FT_RASTER_OPTION_ANTI_ALIASING if you want to support */
/* 5-levels anti-aliasing */
/* #define FT_RASTER_OPTION_ANTI_ALIASING */
/* The size of the two-lines intermediate bitmap used */
/* for anti-aliasing, in bytes. */
#define RASTER_GRAY_LINES 2048
/*************************************************************************/
/*************************************************************************/
/** **/
/** OTHER MACROS (do not change) **/
/** **/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_raster
#ifdef _STANDALONE_
/* This macro is used to indicate that a function parameter is unused. */
/* Its purpose is simply to reduce compiler warnings. Note also that */
/* simply defining it as `(void)x' doesn't avoid warnings with certain */
/* ANSI compilers (e.g. LCC). */
#define FT_UNUSED( x ) (x) = (x)
/* Disable the tracing mechanism for simplicity -- developers can */
/* activate it easily by redefining these two macros. */
#ifndef FT_ERROR
/* nothing */
#define FT_ERROR( x ) do { } while ( 0 )
#endif
#ifndef FT_TRACE
/* nothing */
#define FT_TRACE( x ) do { } while ( 0 )
/* nothing */
#define FT_TRACE1( x ) do { } while ( 0 )
/* nothing */
#define FT_TRACE6( x ) do { } while ( 0 )
#endif
#define Raster_Err_None 0
#define Raster_Err_Not_Ini -1
#define Raster_Err_Overflow -2
#define Raster_Err_Neg_Height -3
#define Raster_Err_Invalid -4
#define Raster_Err_Unsupported -5
#define ft_memset memset
#define FT_DEFINE_RASTER_FUNCS( class_, glyph_format_, raster_new_, \
raster_reset_, raster_set_mode_, \
raster_render_, raster_done_ ) \
const FT_Raster_Funcs class_ = \
{ \
glyph_format_, \
raster_new_, \
raster_reset_, \
raster_set_mode_, \
raster_render_, \
raster_done_ \
};
/* !_STANDALONE_ */
#else
/* for FT_TRACE() and FT_ERROR() */
#define Raster_Err_None Raster_Err_Ok
#define Raster_Err_Not_Ini Raster_Err_Raster_Uninitialized
#define Raster_Err_Overflow Raster_Err_Raster_Overflow
#define Raster_Err_Neg_Height Raster_Err_Raster_Negative_Height
#define Raster_Err_Invalid Raster_Err_Invalid_Outline
#define Raster_Err_Unsupported Raster_Err_Cannot_Render_Glyph
/* !_STANDALONE_ */
#endif
#ifndef FT_MEM_SET
#define FT_MEM_SET( d, s, c ) ft_memset( d, s, c )
#endif
#ifndef FT_MEM_ZERO
#define FT_MEM_ZERO( dest, count ) FT_MEM_SET( dest, 0, count )
#endif
/* FMulDiv means `Fast MulDiv'; it is used in case where `b' is */
/* typically a small value and the result of a*b is known to fit into */
/* 32 bits. */
#define FMulDiv( a, b, c ) ( (a) * (b) / (c) )
/* On the other hand, SMulDiv means `Slow MulDiv', and is used typically */
/* for clipping computations. It simply uses the FT_MulDiv() function */
/* defined in `ftcalc.h'. */
#define SMulDiv FT_MulDiv
#define SMulDiv_No_Round FT_MulDiv_No_Round
/* The rasterizer is a very general purpose component; please leave */
/* the following redefinitions there (you never know your target */
/* environment). */
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#ifndef NULL
#define NULL (void*)0
#endif
#ifndef SUCCESS
#define SUCCESS 0
#endif
#ifndef FAILURE
#define FAILURE 1
#endif
/* The maximum number of stacked Bezier curves. */
#define MaxBezier 32
/* Setting this constant to more than 32 is a */
/* pure waste of space. */
/* fractional bits of *input* coordinates */
#define Pixel_Bits 6
/*************************************************************************/
/*************************************************************************/
/** **/
/** SIMPLE TYPE DECLARATIONS **/
/** **/
/*************************************************************************/
/*************************************************************************/
typedef int Int;
typedef unsigned int UInt;
typedef short Short;
typedef unsigned short UShort, *PUShort;
typedef long Long, *PLong;
typedef unsigned char Byte, *PByte;
typedef char Bool;
typedef union Alignment_
{
long l;
void* p;
void (*f)(void);
} Alignment, *PAlignment;
typedef struct TPoint_
{
Long x;
Long y;
} TPoint;
/* values for the `flags' bit field */
#define Flow_Up 0x8
#define Overshoot_Top 0x10
#define Overshoot_Bottom 0x20
/* States of each line, arc, and profile */
typedef enum TStates_
{
Unknown_State,
Ascending_State,
Descending_State,
Flat_State
} TStates;
typedef struct TProfile_ TProfile;
typedef TProfile* PProfile;
struct TProfile_
{
/* current coordinate during sweep */
FT_F26Dot6 X;
/* link to next profile (various purposes) */
PProfile link;
/* start of profile's data in render pool */
PLong offset;
/* Bit 0-2: drop-out mode */
unsigned flags;
/* Bit 3: profile orientation (up/down) */
/* Bit 4: is top profile? */
/* Bit 5: is bottom profile? */
/* profile's height in scanlines */
long height;
/* profile's starting scanline */
long start;
/* number of lines to step before this */
unsigned countL;
/* profile becomes drawable */
/* next profile in same contour, used */
PProfile next;
/* during drop-out control */
};
typedef PProfile TProfileList;
typedef PProfile* PProfileList;
/* Simple record used to implement a stack of bands, required */
/* by the sub-banding mechanism */
typedef struct black_TBand_
{
/* band's minimum */
Short y_min;
/* band's maximum */
Short y_max;
} black_TBand;
#define AlignProfileSize \
( ( sizeof ( TProfile ) + sizeof ( Alignment ) - 1 ) / sizeof ( long ) )
#undef RAS_ARG
#undef RAS_ARGS
#undef RAS_VAR
#undef RAS_VARS
#ifdef FT_STATIC_RASTER
/* void */
#define RAS_ARGS
/* void */
#define RAS_ARG
/* void */
#define RAS_VARS
/* void */
#define RAS_VAR
#define FT_UNUSED_RASTER do { } while ( 0 )
/* !FT_STATIC_RASTER */
#else
#define RAS_ARGS black_PWorker worker,
#define RAS_ARG black_PWorker worker
#define RAS_VARS worker,
#define RAS_VAR worker
#define FT_UNUSED_RASTER FT_UNUSED( worker )
/* !FT_STATIC_RASTER */
#endif
typedef struct black_TWorker_ black_TWorker, *black_PWorker;
/* prototypes used for sweep function dispatch */
typedef void
Function_Sweep_Init( RAS_ARGS Short* min,
Short* max );
typedef void
Function_Sweep_Span( RAS_ARGS Short y,
FT_F26Dot6 x1,
FT_F26Dot6 x2,
PProfile left,
PProfile right );
typedef void
Function_Sweep_Step( RAS_ARG );
/* NOTE: These operations are only valid on 2's complement processors */
#undef FLOOR
#undef CEILING
#undef TRUNC
#undef SCALED
#define FLOOR( x ) ( (x) & -ras.precision )
#define CEILING( x ) ( ( (x) + ras.precision - 1 ) & -ras.precision )
#define TRUNC( x ) ( (signed long)(x) >> ras.precision_bits )
#define FRAC( x ) ( (x) & ( ras.precision - 1 ) )
#define SCALED( x ) ( ( (x) << ras.scale_shift ) - ras.precision_half )
#define IS_BOTTOM_OVERSHOOT( x ) ( CEILING( x ) - x >= ras.precision_half )
#define IS_TOP_OVERSHOOT( x ) ( x - FLOOR( x ) >= ras.precision_half )
/* The most used variables are positioned at the top of the structure. */
/* Thus, their offset can be coded with less opcodes, resulting in a */
/* smaller executable. */
struct black_TWorker_
{
/* precision related variables */
Int precision_bits;
Int precision;
Int precision_half;
Int precision_shift;
Int precision_step;
Int precision_jitter;
/* == precision_shift for bitmaps */
Int scale_shift;
/* == precision_shift+1 for pixmaps */
/* The profiles buffer */
PLong buff;
/* Render pool size */
PLong sizeBuff;
/* Profiles buffer size */
PLong maxBuff;
/* Current cursor in buffer */
PLong top;
FT_Error error;
/* number of Y-turns in outline */
Int numTurns;
/* current Bezier arc pointer */
TPoint* arc;
/* target bitmap width */
UShort bWidth;
/* target bitmap buffer */
PByte bTarget;
/* target pixmap buffer */
PByte gTarget;
Long lastX, lastY;
Long minY, maxY;
/* current number of profiles */
UShort num_Profs;
/* signals a fresh new profile which */
Bool fresh;
/* `start' field must be completed */
/* signals that the last arc ended */
Bool joint;
/* exactly on a scanline. Allows */
/* removal of doublets */
/* current profile */
PProfile cProfile;
/* head of linked list of profiles */
PProfile fProfile;
/* contour's first profile in case */
PProfile gProfile;
/* of impact */
/* rendering state */
TStates state;
/* description of target bit/pixmap */
FT_Bitmap target;
FT_Outline outline;
/* current offset in target bitmap */
Long traceOfs;
/* current offset in target pixmap */
Long traceG;
/* sweep's increment in target bitmap */
Short traceIncr;
/* current min x during gray rendering */
Short gray_min_x;
/* current max x during gray rendering */
Short gray_max_x;
/* dispatch variables */
Function_Sweep_Init* Proc_Sweep_Init;
Function_Sweep_Span* Proc_Sweep_Span;
Function_Sweep_Span* Proc_Sweep_Drop;
Function_Sweep_Step* Proc_Sweep_Step;
/* current drop_out control method */
Byte dropOutControl;
/* indicates whether a horizontal pass */
Bool second_pass;
/* should be performed to control */
/* drop-out accurately when calling */
/* Render_Glyph. Note that there is */
/* no horizontal pass during gray */
/* rendering. */
/* The Bezier stack */
TPoint arcs[3 * MaxBezier + 1];
/* band stack used for sub-banding */
black_TBand band_stack[16];
/* band stack top */
Int band_top;
#ifdef FT_RASTER_OPTION_ANTI_ALIASING
Byte* grays;
Byte gray_lines[RASTER_GRAY_LINES];
/* Intermediate table used to render the */
/* graylevels pixmaps. */
/* gray_lines is a buffer holding two */
/* monochrome scanlines */
/* width in bytes of one monochrome */
Short gray_width;
/* intermediate scanline of gray_lines. */
/* Each gray pixel takes 2 bits long there */
/* The gray_lines must hold 2 lines, thus with size */
/* in bytes of at least `gray_width*2'. */
/* FT_RASTER_ANTI_ALIASING */
#endif
};
typedef struct black_TRaster_
{
char* buffer;
long buffer_size;
void* memory;
black_PWorker worker;
Byte grays[5];
Short gray_width;
} black_TRaster, *black_PRaster;
#ifdef FT_STATIC_RASTER
static black_TWorker cur_ras;
#define ras cur_ras
/* !FT_STATIC_RASTER */
#else
#define ras (*worker)
/* !FT_STATIC_RASTER */
#endif
#ifdef FT_RASTER_OPTION_ANTI_ALIASING
/* A lookup table used to quickly count set bits in four gray 2x2 */
/* cells. The values of the table have been produced with the */
/* following code: */
/* */
/* for ( i = 0; i < 256; i++ ) */
/* { */
/* l = 0; */
/* j = i; */
/* */
/* for ( c = 0; c < 4; c++ ) */
/* { */
/* l <<= 4; */
/* */
/* if ( j & 0x80 ) l++; */
/* if ( j & 0x40 ) l++; */
/* */
/* j = ( j << 2 ) & 0xFF; */
/* } */
/* printf( "0x%04X", l ); */
/* } */
/* */
static const short count_table[256] =
{
0x0000, 0x0001, 0x0001, 0x0002, 0x0010, 0x0011, 0x0011, 0x0012,
0x0010, 0x0011, 0x0011, 0x0012, 0x0020, 0x0021, 0x0021, 0x0022,
0x0100, 0x0101, 0x0101, 0x0102, 0x0110, 0x0111, 0x0111, 0x0112,
0x0110, 0x0111, 0x0111, 0x0112, 0x0120, 0x0121, 0x0121, 0x0122,
0x0100, 0x0101, 0x0101, 0x0102, 0x0110, 0x0111, 0x0111, 0x0112,
0x0110, 0x0111, 0x0111, 0x0112, 0x0120, 0x0121, 0x0121, 0x0122,
0x0200, 0x0201, 0x0201, 0x0202, 0x0210, 0x0211, 0x0211, 0x0212,
0x0210, 0x0211, 0x0211, 0x0212, 0x0220, 0x0221, 0x0221, 0x0222,
0x1000, 0x1001, 0x1001, 0x1002, 0x1010, 0x1011, 0x1011, 0x1012,
0x1010, 0x1011, 0x1011, 0x1012, 0x1020, 0x1021, 0x1021, 0x1022,
0x1100, 0x1101, 0x1101, 0x1102, 0x1110, 0x1111, 0x1111, 0x1112,
0x1110, 0x1111, 0x1111, 0x1112, 0x1120, 0x1121, 0x1121, 0x1122,
0x1100, 0x1101, 0x1101, 0x1102, 0x1110, 0x1111, 0x1111, 0x1112,
0x1110, 0x1111, 0x1111, 0x1112, 0x1120, 0x1121, 0x1121, 0x1122,
0x1200, 0x1201, 0x1201, 0x1202, 0x1210, 0x1211, 0x1211, 0x1212,
0x1210, 0x1211, 0x1211, 0x1212, 0x1220, 0x1221, 0x1221, 0x1222,
0x1000, 0x1001, 0x1001, 0x1002, 0x1010, 0x1011, 0x1011, 0x1012,
0x1010, 0x1011, 0x1011, 0x1012, 0x1020, 0x1021, 0x1021, 0x1022,
0x1100, 0x1101, 0x1101, 0x1102, 0x1110, 0x1111, 0x1111, 0x1112,
0x1110, 0x1111, 0x1111, 0x1112, 0x1120, 0x1121, 0x1121, 0x1122,
0x1100, 0x1101, 0x1101, 0x1102, 0x1110, 0x1111, 0x1111, 0x1112,
0x1110, 0x1111, 0x1111, 0x1112, 0x1120, 0x1121, 0x1121, 0x1122,
0x1200, 0x1201, 0x1201, 0x1202, 0x1210, 0x1211, 0x1211, 0x1212,
0x1210, 0x1211, 0x1211, 0x1212, 0x1220, 0x1221, 0x1221, 0x1222,
0x2000, 0x2001, 0x2001, 0x2002, 0x2010, 0x2011, 0x2011, 0x2012,
0x2010, 0x2011, 0x2011, 0x2012, 0x2020, 0x2021, 0x2021, 0x2022,
0x2100, 0x2101, 0x2101, 0x2102, 0x2110, 0x2111, 0x2111, 0x2112,
0x2110, 0x2111, 0x2111, 0x2112, 0x2120, 0x2121, 0x2121, 0x2122,
0x2100, 0x2101, 0x2101, 0x2102, 0x2110, 0x2111, 0x2111, 0x2112,
0x2110, 0x2111, 0x2111, 0x2112, 0x2120, 0x2121, 0x2121, 0x2122,
0x2200, 0x2201, 0x2201, 0x2202, 0x2210, 0x2211, 0x2211, 0x2212,
0x2210, 0x2211, 0x2211, 0x2212, 0x2220, 0x2221, 0x2221, 0x2222
};
/* FT_RASTER_OPTION_ANTI_ALIASING */
#endif
/*************************************************************************/
/*************************************************************************/
/** **/
/** PROFILES COMPUTATION **/
/** **/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* Set_High_Precision */
/* */
/* <Description> */
/* Set precision variables according to param flag. */
/* */
/* <Input> */
/* High :: Set to True for high precision (typically for ppem < 18), */
/* false otherwise. */
/* */
static void
Set_High_Precision( RAS_ARGS Int High )
{
/*
* `precision_step' is used in `Bezier_Up' to decide when to split a
* given y-monotonous Bezier arc that crosses a scanline before
* approximating it as a straight segment. The default value of 32 (for
* low accuracy) corresponds to
*
* 32 / 64 == 0.5 pixels ,
*
* while for the high accuracy case we have
*
* 256/ (1 << 12) = 0.0625 pixels .
*
* `precision_jitter' is an epsilon threshold used in
* `Vertical_Sweep_Span' to deal with small imperfections in the Bezier
* decomposition (after all, we are working with approximations only);
* it avoids switching on additional pixels which would cause artifacts
* otherwise.
*
* The value of `precision_jitter' has been determined heuristically.
*
*/
if ( High )
{
ras.precision_bits = 12;
ras.precision_step = 256;
ras.precision_jitter = 30;
}
else
{
ras.precision_bits = 6;
ras.precision_step = 32;
ras.precision_jitter = 2;
}
FT_TRACE6(( "Set_High_Precision(%s)\n", High ? "true" : "false" ));
ras.precision = 1 << ras.precision_bits;
ras.precision_half = ras.precision / 2;
ras.precision_shift = ras.precision_bits - Pixel_Bits;
}
/*************************************************************************/
/* */
/* <Function> */
/* New_Profile */
/* */
/* <Description> */
/* Create a new profile in the render pool. */
/* */
/* <Input> */
/* aState :: The state/orientation of the new profile. */
/* */
/* overshoot :: Whether the profile's unrounded start position */
/* differs by at least a half pixel. */
/* */
/* <Return> */
/* SUCCESS on success. FAILURE in case of overflow or of incoherent */
/* profile. */
/* */
static Bool
New_Profile( RAS_ARGS TStates aState,
Bool overshoot )
{
if ( !ras.fProfile )
{
ras.cProfile = (PProfile)ras.top;
ras.fProfile = ras.cProfile;
ras.top += AlignProfileSize;
}
if ( ras.top >= ras.maxBuff )
{
ras.error = Raster_Err_Overflow;
return FAILURE;
}
ras.cProfile->flags = 0;
ras.cProfile->start = 0;
ras.cProfile->height = 0;
ras.cProfile->offset = ras.top;
ras.cProfile->link = (PProfile)0;
ras.cProfile->next = (PProfile)0;
ras.cProfile->flags = ras.dropOutControl;
switch ( aState )
{
case Ascending_State:
ras.cProfile->flags |= Flow_Up;
if ( overshoot )
ras.cProfile->flags |= Overshoot_Bottom;
FT_TRACE6(( "New ascending profile = %p\n", ras.cProfile ));
break;
case Descending_State:
if ( overshoot )
ras.cProfile->flags |= Overshoot_Top;
FT_TRACE6(( "New descending profile = %p\n", ras.cProfile ));
break;
default:
FT_ERROR(( "New_Profile: invalid profile direction\n" ));
ras.error = Raster_Err_Invalid;
return FAILURE;
}
if ( !ras.gProfile )
ras.gProfile = ras.cProfile;
ras.state = aState;
ras.fresh = TRUE;
ras.joint = FALSE;
return SUCCESS;
}
/*************************************************************************/
/* */
/* <Function> */
/* End_Profile */
/* */
/* <Description> */
/* Finalize the current profile. */
/* */
/* <Input> */
/* overshoot :: Whether the profile's unrounded end position differs */
/* by at least a half pixel. */
/* */
/* <Return> */
/* SUCCESS on success. FAILURE in case of overflow or incoherency. */
/* */
static Bool
End_Profile( RAS_ARGS Bool overshoot )
{
Long h;
PProfile oldProfile;
h = (Long)( ras.top - ras.cProfile->offset );
if ( h < 0 )
{
FT_ERROR(( "End_Profile: negative height encountered\n" ));
ras.error = Raster_Err_Neg_Height;
return FAILURE;
}
if ( h > 0 )
{
FT_TRACE6(( "Ending profile %p, start = %ld, height = %ld\n",
ras.cProfile, ras.cProfile->start, h ));
ras.cProfile->height = h;
if ( overshoot )
{
if ( ras.cProfile->flags & Flow_Up )
ras.cProfile->flags |= Overshoot_Top;
else
ras.cProfile->flags |= Overshoot_Bottom;
}
oldProfile = ras.cProfile;
ras.cProfile = (PProfile)ras.top;
ras.top += AlignProfileSize;
ras.cProfile->height = 0;
ras.cProfile->offset = ras.top;
oldProfile->next = ras.cProfile;
ras.num_Profs++;
}
if ( ras.top >= ras.maxBuff )
{
FT_TRACE1(( "overflow in End_Profile\n" ));
ras.error = Raster_Err_Overflow;
return FAILURE;
}
ras.joint = FALSE;
return SUCCESS;
}
/*************************************************************************/
/* */
/* <Function> */
/* Insert_Y_Turn */
/* */
/* <Description> */
/* Insert a salient into the sorted list placed on top of the render */
/* pool. */
/* */
/* <Input> */
/* New y scanline position. */
/* */
/* <Return> */
/* SUCCESS on success. FAILURE in case of overflow. */
/* */
static Bool
Insert_Y_Turn( RAS_ARGS Int y )
{
PLong y_turns;
Int y2, n;
n = ras.numTurns - 1;
y_turns = ras.sizeBuff - ras.numTurns;
/* look for first y value that is <= */
while ( n >= 0 && y < y_turns[n] )
n--;
/* if it is <, simply insert it, ignore if == */
if ( n >= 0 && y > y_turns[n] )
while ( n >= 0 )
{
y2 = (Int)y_turns[n];
y_turns[n] = y;
y = y2;
n--;
}
if ( n < 0 )
{
ras.maxBuff--;
if ( ras.maxBuff <= ras.top )
{
ras.error = Raster_Err_Overflow;
return FAILURE;
}
ras.numTurns++;
ras.sizeBuff[-ras.numTurns] = y;
}
return SUCCESS;
}
/*************************************************************************/
/* */
/* <Function> */
/* Finalize_Profile_Table */
/* */
/* <Description> */
/* Adjust all links in the profiles list. */
/* */
/* <Return> */
/* SUCCESS on success. FAILURE in case of overflow. */
/* */
static Bool
Finalize_Profile_Table( RAS_ARG )
{
Int bottom, top;
UShort n;
PProfile p;
n = ras.num_Profs;
p = ras.fProfile;
if ( n > 1 && p )
{
while ( n > 0 )
{
if ( n > 1 )
p->link = (PProfile)( p->offset + p->height );
else
p->link = NULL;
if ( p->flags & Flow_Up )
{
bottom = (Int)p->start;
top = (Int)( p->start + p->height - 1 );
}
else
{
bottom = (Int)( p->start - p->height + 1 );
top = (Int)p->start;
p->start = bottom;
p->offset += p->height - 1;
}
if ( Insert_Y_Turn( RAS_VARS bottom ) ||
Insert_Y_Turn( RAS_VARS top + 1 ) )
return FAILURE;
p = p->link;
n--;
}
}
else
ras.fProfile = NULL;
return SUCCESS;
}
/*************************************************************************/
/* */
/* <Function> */
/* Split_Conic */
/* */
/* <Description> */
/* Subdivide one conic Bezier into two joint sub-arcs in the Bezier */
/* stack. */
/* */
/* <Input> */
/* None (subdivided Bezier is taken from the top of the stack). */
/* */
/* <Note> */
/* This routine is the `beef' of this component. It is _the_ inner */
/* loop that should be optimized to hell to get the best performance. */
/* */
static void
Split_Conic( TPoint* base )
{
Long a, b;
base[4].x = base[2].x;
b = base[1].x;
a = base[3].x = ( base[2].x + b ) / 2;
b = base[1].x = ( base[0].x + b ) / 2;
base[2].x = ( a + b ) / 2;
base[4].y = base[2].y;
b = base[1].y;
a = base[3].y = ( base[2].y + b ) / 2;
b = base[1].y = ( base[0].y + b ) / 2;
base[2].y = ( a + b ) / 2;
/* hand optimized. gcc doesn't seem to be too good at common */
/* expression substitution and instruction scheduling ;-) */
}
/*************************************************************************/
/* */
/* <Function> */
/* Split_Cubic */
/* */
/* <Description> */
/* Subdivide a third-order Bezier arc into two joint sub-arcs in the */
/* Bezier stack. */
/* */
/* <Note> */
/* This routine is the `beef' of the component. It is one of _the_ */
/* inner loops that should be optimized like hell to get the best */
/* performance. */
/* */
static void
Split_Cubic( TPoint* base )
{
Long a, b, c, d;
base[6].x = base[3].x;
c = base[1].x;
d = base[2].x;
base[1].x = a = ( base[0].x + c + 1 ) >> 1;
base[5].x = b = ( base[3].x + d + 1 ) >> 1;
c = ( c + d + 1 ) >> 1;
base[2].x = a = ( a + c + 1 ) >> 1;
base[4].x = b = ( b + c + 1 ) >> 1;
base[3].x = ( a + b + 1 ) >> 1;
base[6].y = base[3].y;
c = base[1].y;
d = base[2].y;
base[1].y = a = ( base[0].y + c + 1 ) >> 1;
base[5].y = b = ( base[3].y + d + 1 ) >> 1;
c = ( c + d + 1 ) >> 1;
base[2].y = a = ( a + c + 1 ) >> 1;
base[4].y = b = ( b + c + 1 ) >> 1;
base[3].y = ( a + b + 1 ) >> 1;
}
/*************************************************************************/
/* */
/* <Function> */
/* Line_Up */
/* */
/* <Description> */
/* Compute the x-coordinates of an ascending line segment and store */
/* them in the render pool. */
/* */
/* <Input> */
/* x1 :: The x-coordinate of the segment's start point. */
/* */
/* y1 :: The y-coordinate of the segment's start point. */
/* */
/* x2 :: The x-coordinate of the segment's end point. */
/* */
/* y2 :: The y-coordinate of the segment's end point. */
/* */
/* miny :: A lower vertical clipping bound value. */
/* */
/* maxy :: An upper vertical clipping bound value. */
/* */
/* <Return> */
/* SUCCESS on success, FAILURE on render pool overflow. */
/* */
static Bool
Line_Up( RAS_ARGS Long x1,
Long y1,
Long x2,
Long y2,
Long miny,
Long maxy )
{
Long Dx, Dy;
/* XXX: is `Short' sufficient? */
Int e1, e2, f1, f2, size;
Long Ix, Rx, Ax;
PLong top;
Dx = x2 - x1;
Dy = y2 - y1;
if ( Dy <= 0 || y2 < miny || y1 > maxy )
return SUCCESS;
if ( y1 < miny )
{
/* Take care: miny-y1 can be a very large value; we use */
/* a slow MulDiv function to avoid clipping bugs */
x1 += SMulDiv( Dx, miny - y1, Dy );
e1 = (Int)TRUNC( miny );
f1 = 0;
}
else
{
e1 = (Int)TRUNC( y1 );
f1 = (Int)FRAC( y1 );
}
if ( y2 > maxy )
{
/* x2 += FMulDiv( Dx, maxy - y2, Dy ); UNNECESSARY */
e2 = (Int)TRUNC( maxy );
f2 = 0;
}
else
{
e2 = (Int)TRUNC( y2 );
f2 = (Int)FRAC( y2 );
}
if ( f1 > 0 )
{
if ( e1 == e2 )
return SUCCESS;
else
{
x1 += SMulDiv( Dx, ras.precision - f1, Dy );
e1 += 1;
}
}
else
if ( ras.joint )
{
ras.top--;
ras.joint = FALSE;
}
ras.joint = (char)( f2 == 0 );
if ( ras.fresh )
{
ras.cProfile->start = e1;
ras.fresh = FALSE;
}
size = e2 - e1 + 1;
if ( ras.top + size >= ras.maxBuff )
{
ras.error = Raster_Err_Overflow;
return FAILURE;
}
if ( Dx > 0 )
{
Ix = SMulDiv_No_Round( ras.precision, Dx, Dy );
Rx = ( ras.precision * Dx ) % Dy;
Dx = 1;
}
else
{
Ix = -SMulDiv_No_Round( ras.precision, -Dx, Dy );
Rx = ( ras.precision * -Dx ) % Dy;
Dx = -1;
}
Ax = -Dy;
top = ras.top;
while ( size > 0 )
{
*top++ = x1;
x1 += Ix;
Ax += Rx;
if ( Ax >= 0 )
{
Ax -= Dy;
x1 += Dx;
}
size--;
}
ras.top = top;
return SUCCESS;
}
/*************************************************************************/
/* */
/* <Function> */
/* Line_Down */
/* */
/* <Description> */
/* Compute the x-coordinates of an descending line segment and store */
/* them in the render pool. */
/* */
/* <Input> */
/* x1 :: The x-coordinate of the segment's start point. */
/* */
/* y1 :: The y-coordinate of the segment's start point. */
/* */
/* x2 :: The x-coordinate of the segment's end point. */
/* */
/* y2 :: The y-coordinate of the segment's end point. */
/* */
/* miny :: A lower vertical clipping bound value. */
/* */
/* maxy :: An upper vertical clipping bound value. */
/* */
/* <Return> */
/* SUCCESS on success, FAILURE on render pool overflow. */
/* */
static Bool
Line_Down( RAS_ARGS Long x1,
Long y1,
Long x2,
Long y2,
Long miny,
Long maxy )
{
Bool result, fresh;
fresh = ras.fresh;
result = Line_Up( RAS_VARS x1, -y1, x2, -y2, -maxy, -miny );
if ( fresh && !ras.fresh )
ras.cProfile->start = -ras.cProfile->start;
return result;
}
/* A function type describing the functions used to split Bezier arcs */
typedef void (*TSplitter)( TPoint* base );
/*************************************************************************/
/* */
/* <Function> */
/* Bezier_Up */
/* */
/* <Description> */
/* Compute the x-coordinates of an ascending Bezier arc and store */
/* them in the render pool. */
/* */
/* <Input> */
/* degree :: The degree of the Bezier arc (either 2 or 3). */
/* */
/* splitter :: The function to split Bezier arcs. */
/* */
/* miny :: A lower vertical clipping bound value. */
/* */
/* maxy :: An upper vertical clipping bound value. */
/* */
/* <Return> */
/* SUCCESS on success, FAILURE on render pool overflow. */
/* */
static Bool
Bezier_Up( RAS_ARGS Int degree,
TSplitter splitter,
Long miny,
Long maxy )
{
Long y1, y2, e, e2, e0;
Short f1;
TPoint* arc;
TPoint* start_arc;
PLong top;
arc = ras.arc;
y1 = arc[degree].y;
y2 = arc[0].y;
top = ras.top;
if ( y2 < miny || y1 > maxy )
goto Fin;
e2 = FLOOR( y2 );
if ( e2 > maxy )
e2 = maxy;
e0 = miny;
if ( y1 < miny )
e = miny;
else
{
e = CEILING( y1 );
f1 = (Short)( FRAC( y1 ) );
e0 = e;
if ( f1 == 0 )
{
if ( ras.joint )
{
top--;
ras.joint = FALSE;
}
*top++ = arc[degree].x;
e += ras.precision;
}
}
if ( ras.fresh )
{
ras.cProfile->start = TRUNC( e0 );
ras.fresh = FALSE;
}
if ( e2 < e )
goto Fin;
if ( ( top + TRUNC( e2 - e ) + 1 ) >= ras.maxBuff )
{
ras.top = top;
ras.error = Raster_Err_Overflow;
return FAILURE;
}
start_arc = arc;
while ( arc >= start_arc && e <= e2 )
{
ras.joint = FALSE;
y2 = arc[0].y;
if ( y2 > e )
{
y1 = arc[degree].y;
if ( y2 - y1 >= ras.precision_step )
{
splitter( arc );
arc += degree;
}
else
{
*top++ = arc[degree].x + FMulDiv( arc[0].x - arc[degree].x,
e - y1, y2 - y1 );
arc -= degree;
e += ras.precision;
}
}
else
{
if ( y2 == e )
{
ras.joint = TRUE;
*top++ = arc[0].x;
e += ras.precision;
}
arc -= degree;
}
}
Fin:
ras.top = top;
ras.arc -= degree;
return SUCCESS;
}
/*************************************************************************/
/* */
/* <Function> */
/* Bezier_Down */
/* */
/* <Description> */
/* Compute the x-coordinates of an descending Bezier arc and store */
/* them in the render pool. */
/* */
/* <Input> */
/* degree :: The degree of the Bezier arc (either 2 or 3). */
/* */
/* splitter :: The function to split Bezier arcs. */
/* */
/* miny :: A lower vertical clipping bound value. */
/* */
/* maxy :: An upper vertical clipping bound value. */
/* */
/* <Return> */
/* SUCCESS on success, FAILURE on render pool overflow. */
/* */
static Bool
Bezier_Down( RAS_ARGS Int degree,
TSplitter splitter,
Long miny,
Long maxy )
{
TPoint* arc = ras.arc;
Bool result, fresh;
arc[0].y = -arc[0].y;
arc[1].y = -arc[1].y;
arc[2].y = -arc[2].y;
if ( degree > 2 )
arc[3].y = -arc[3].y;
fresh = ras.fresh;
result = Bezier_Up( RAS_VARS degree, splitter, -maxy, -miny );
if ( fresh && !ras.fresh )
ras.cProfile->start = -ras.cProfile->start;
arc[0].y = -arc[0].y;
return result;
}
/*************************************************************************/
/* */
/* <Function> */
/* Line_To */
/* */
/* <Description> */
/* Inject a new line segment and adjust the Profiles list. */
/* */
/* <Input> */
/* x :: The x-coordinate of the segment's end point (its start point */
/* is stored in `lastX'). */
/* */
/* y :: The y-coordinate of the segment's end point (its start point */
/* is stored in `lastY'). */
/* */
/* <Return> */
/* SUCCESS on success, FAILURE on render pool overflow or incorrect */
/* profile. */
/* */
static Bool
Line_To( RAS_ARGS Long x,
Long y )
{
/* First, detect a change of direction */
switch ( ras.state )
{
case Unknown_State:
if ( y > ras.lastY )
{
if ( New_Profile( RAS_VARS Ascending_State,
IS_BOTTOM_OVERSHOOT( ras.lastY ) ) )
return FAILURE;
}
else
{
if ( y < ras.lastY )
if ( New_Profile( RAS_VARS Descending_State,
IS_TOP_OVERSHOOT( ras.lastY ) ) )
return FAILURE;
}
break;
case Ascending_State:
if ( y < ras.lastY )
{
if ( End_Profile( RAS_VARS IS_TOP_OVERSHOOT( ras.lastY ) ) ||
New_Profile( RAS_VARS Descending_State,
IS_TOP_OVERSHOOT( ras.lastY ) ) )
return FAILURE;
}
break;
case Descending_State:
if ( y > ras.lastY )
{
if ( End_Profile( RAS_VARS IS_BOTTOM_OVERSHOOT( ras.lastY ) ) ||
New_Profile( RAS_VARS Ascending_State,
IS_BOTTOM_OVERSHOOT( ras.lastY ) ) )
return FAILURE;
}
break;
default:
;
}
/* Then compute the lines */
switch ( ras.state )
{
case Ascending_State:
if ( Line_Up( RAS_VARS ras.lastX, ras.lastY,
x, y, ras.minY, ras.maxY ) )
return FAILURE;
break;
case Descending_State:
if ( Line_Down( RAS_VARS ras.lastX, ras.lastY,
x, y, ras.minY, ras.maxY ) )
return FAILURE;
break;
default:
;
}
ras.lastX = x;
ras.lastY = y;
return SUCCESS;
}
/*************************************************************************/
/* */
/* <Function> */
/* Conic_To */
/* */
/* <Description> */
/* Inject a new conic arc and adjust the profile list. */
/* */
/* <Input> */
/* cx :: The x-coordinate of the arc's new control point. */
/* */
/* cy :: The y-coordinate of the arc's new control point. */
/* */
/* x :: The x-coordinate of the arc's end point (its start point is */
/* stored in `lastX'). */
/* */
/* y :: The y-coordinate of the arc's end point (its start point is */
/* stored in `lastY'). */
/* */
/* <Return> */
/* SUCCESS on success, FAILURE on render pool overflow or incorrect */
/* profile. */
/* */
static Bool
Conic_To( RAS_ARGS Long cx,
Long cy,
Long x,
Long y )
{
Long y1, y2, y3, x3, ymin, ymax;
TStates state_bez;
ras.arc = ras.arcs;
ras.arc[2].x = ras.lastX;
ras.arc[2].y = ras.lastY;
ras.arc[1].x = cx;
ras.arc[1].y = cy;
ras.arc[0].x = x;
ras.arc[0].y = y;
do
{
y1 = ras.arc[2].y;
y2 = ras.arc[1].y;
y3 = ras.arc[0].y;
x3 = ras.arc[0].x;
/* first, categorize the Bezier arc */
if ( y1 <= y3 )
{
ymin = y1;
ymax = y3;
}
else
{
ymin = y3;
ymax = y1;
}
if ( y2 < ymin || y2 > ymax )
{
/* this arc has no given direction, split it! */
Split_Conic( ras.arc );
ras.arc += 2;
}
else if ( y1 == y3 )
{
/* this arc is flat, ignore it and pop it from the Bezier stack */
ras.arc -= 2;
}
else
{
/* the arc is y-monotonous, either ascending or descending */
/* detect a change of direction */
state_bez = y1 < y3 ? Ascending_State : Descending_State;
if ( ras.state != state_bez )
{
Bool o = state_bez == Ascending_State ? IS_BOTTOM_OVERSHOOT( y1 )
: IS_TOP_OVERSHOOT( y1 );
/* finalize current profile if any */
if ( ras.state != Unknown_State &&
End_Profile( RAS_VARS o ) )
goto Fail;
/* create a new profile */
if ( New_Profile( RAS_VARS state_bez, o ) )
goto Fail;
}
/* now call the appropriate routine */
if ( state_bez == Ascending_State )
{
if ( Bezier_Up( RAS_VARS 2, Split_Conic, ras.minY, ras.maxY ) )
goto Fail;
}
else
if ( Bezier_Down( RAS_VARS 2, Split_Conic, ras.minY, ras.maxY ) )
goto Fail;
}
} while ( ras.arc >= ras.arcs );
ras.lastX = x3;
ras.lastY = y3;
return SUCCESS;
Fail:
return FAILURE;
}
/*************************************************************************/
/* */
/* <Function> */
/* Cubic_To */
/* */
/* <Description> */
/* Inject a new cubic arc and adjust the profile list. */
/* */
/* <Input> */
/* cx1 :: The x-coordinate of the arc's first new control point. */
/* */
/* cy1 :: The y-coordinate of the arc's first new control point. */
/* */
/* cx2 :: The x-coordinate of the arc's second new control point. */
/* */
/* cy2 :: The y-coordinate of the arc's second new control point. */
/* */
/* x :: The x-coordinate of the arc's end point (its start point is */
/* stored in `lastX'). */
/* */
/* y :: The y-coordinate of the arc's end point (its start point is */
/* stored in `lastY'). */
/* */
/* <Return> */
/* SUCCESS on success, FAILURE on render pool overflow or incorrect */
/* profile. */
/* */
static Bool
Cubic_To( RAS_ARGS Long cx1,
Long cy1,
Long cx2,
Long cy2,
Long x,
Long y )
{
Long y1, y2, y3, y4, x4, ymin1, ymax1, ymin2, ymax2;
TStates state_bez;
ras.arc = ras.arcs;
ras.arc[3].x = ras.lastX;
ras.arc[3].y = ras.lastY;
ras.arc[2].x = cx1;
ras.arc[2].y = cy1;
ras.arc[1].x = cx2;
ras.arc[1].y = cy2;
ras.arc[0].x = x;
ras.arc[0].y = y;
do
{
y1 = ras.arc[3].y;
y2 = ras.arc[2].y;
y3 = ras.arc[1].y;
y4 = ras.arc[0].y;
x4 = ras.arc[0].x;
/* first, categorize the Bezier arc */
if ( y1 <= y4 )
{
ymin1 = y1;
ymax1 = y4;
}
else
{
ymin1 = y4;
ymax1 = y1;
}
if ( y2 <= y3 )
{
ymin2 = y2;
ymax2 = y3;
}
else
{
ymin2 = y3;
ymax2 = y2;
}
if ( ymin2 < ymin1 || ymax2 > ymax1 )
{
/* this arc has no given direction, split it! */
Split_Cubic( ras.arc );
ras.arc += 3;
}
else if ( y1 == y4 )
{
/* this arc is flat, ignore it and pop it from the Bezier stack */
ras.arc -= 3;
}
else
{
state_bez = ( y1 <= y4 ) ? Ascending_State : Descending_State;
/* detect a change of direction */
if ( ras.state != state_bez )
{
Bool o = state_bez == Ascending_State ? IS_BOTTOM_OVERSHOOT( y1 )
: IS_TOP_OVERSHOOT( y1 );
/* finalize current profile if any */
if ( ras.state != Unknown_State &&
End_Profile( RAS_VARS o ) )
goto Fail;
if ( New_Profile( RAS_VARS state_bez, o ) )
goto Fail;
}
/* compute intersections */
if ( state_bez == Ascending_State )
{
if ( Bezier_Up( RAS_VARS 3, Split_Cubic, ras.minY, ras.maxY ) )
goto Fail;
}
else
if ( Bezier_Down( RAS_VARS 3, Split_Cubic, ras.minY, ras.maxY ) )
goto Fail;
}
} while ( ras.arc >= ras.arcs );
ras.lastX = x4;
ras.lastY = y4;
return SUCCESS;
Fail:
return FAILURE;
}
#undef SWAP_
#define SWAP_( x, y ) do \
{ \
Long swap = x; \
\
\
x = y; \
y = swap; \
} while ( 0 )
/*************************************************************************/
/* */
/* <Function> */
/* Decompose_Curve */
/* */
/* <Description> */
/* Scan the outline arrays in order to emit individual segments and */
/* Beziers by calling Line_To() and Bezier_To(). It handles all */
/* weird cases, like when the first point is off the curve, or when */
/* there are simply no `on' points in the contour! */
/* */
/* <Input> */
/* first :: The index of the first point in the contour. */
/* */
/* last :: The index of the last point in the contour. */
/* */
/* flipped :: If set, flip the direction of the curve. */
/* */
/* <Return> */
/* SUCCESS on success, FAILURE on error. */
/* */
static Bool
Decompose_Curve( RAS_ARGS UShort first,
UShort last,
int flipped )
{
FT_Vector v_last;
FT_Vector v_control;
FT_Vector v_start;
FT_Vector* points;
FT_Vector* point;
FT_Vector* limit;
char* tags;
/* current point's state */
unsigned tag;
points = ras.outline.points;
limit = points + last;
v_start.x = SCALED( points[first].x );
v_start.y = SCALED( points[first].y );
v_last.x = SCALED( points[last].x );
v_last.y = SCALED( points[last].y );
if ( flipped )
{
SWAP_( v_start.x, v_start.y );
SWAP_( v_last.x, v_last.y );
}
v_control = v_start;
point = points + first;
tags = ras.outline.tags + first;
/* set scan mode if necessary */
if ( tags[0] & FT_CURVE_TAG_HAS_SCANMODE )
ras.dropOutControl = (Byte)tags[0] >> 5;
tag = FT_CURVE_TAG( tags[0] );
/* A contour cannot start with a cubic control point! */
if ( tag == FT_CURVE_TAG_CUBIC )
goto Invalid_Outline;
/* check first point to determine origin */
if ( tag == FT_CURVE_TAG_CONIC )
{
/* first point is conic control. Yes, this happens. */
if ( FT_CURVE_TAG( ras.outline.tags[last] ) == FT_CURVE_TAG_ON )
{
/* start at last point if it is on the curve */
v_start = v_last;
limit--;
}
else
{
/* if both first and last points are conic, */
/* start at their middle and record its position */
/* for closure */
v_start.x = ( v_start.x + v_last.x ) / 2;
v_start.y = ( v_start.y + v_last.y ) / 2;
v_last = v_start;
}
point--;
tags--;
}
ras.lastX = v_start.x;
ras.lastY = v_start.y;
while ( point < limit )
{
point++;
tags++;
tag = FT_CURVE_TAG( tags[0] );
switch ( tag )
{
/* emit a single line_to */
case FT_CURVE_TAG_ON:
{
Long x, y;
x = SCALED( point->x );
y = SCALED( point->y );
if ( flipped )
SWAP_( x, y );
if ( Line_To( RAS_VARS x, y ) )
goto Fail;
continue;
}
/* consume conic arcs */
case FT_CURVE_TAG_CONIC:
v_control.x = SCALED( point[0].x );
v_control.y = SCALED( point[0].y );
if ( flipped )
SWAP_( v_control.x, v_control.y );
Do_Conic:
if ( point < limit )
{
FT_Vector v_middle;
Long x, y;
point++;
tags++;
tag = FT_CURVE_TAG( tags[0] );
x = SCALED( point[0].x );
y = SCALED( point[0].y );
if ( flipped )
SWAP_( x, y );
if ( tag == FT_CURVE_TAG_ON )
{
if ( Conic_To( RAS_VARS v_control.x, v_control.y, x, y ) )
goto Fail;
continue;
}
if ( tag != FT_CURVE_TAG_CONIC )
goto Invalid_Outline;
v_middle.x = ( v_control.x + x ) / 2;
v_middle.y = ( v_control.y + y ) / 2;
if ( Conic_To( RAS_VARS v_control.x, v_control.y,
v_middle.x, v_middle.y ) )
goto Fail;
v_control.x = x;
v_control.y = y;
goto Do_Conic;
}
if ( Conic_To( RAS_VARS v_control.x, v_control.y,
v_start.x, v_start.y ) )
goto Fail;
goto Close;
/* FT_CURVE_TAG_CUBIC */
default:
{
Long x1, y1, x2, y2, x3, y3;
if ( point + 1 > limit ||
FT_CURVE_TAG( tags[1] ) != FT_CURVE_TAG_CUBIC )
goto Invalid_Outline;
point += 2;
tags += 2;
x1 = SCALED( point[-2].x );
y1 = SCALED( point[-2].y );
x2 = SCALED( point[-1].x );
y2 = SCALED( point[-1].y );
if ( flipped )
{
SWAP_( x1, y1 );
SWAP_( x2, y2 );
}
if ( point <= limit )
{
x3 = SCALED( point[0].x );
y3 = SCALED( point[0].y );
if ( flipped )
SWAP_( x3, y3 );
if ( Cubic_To( RAS_VARS x1, y1, x2, y2, x3, y3 ) )
goto Fail;
continue;
}
if ( Cubic_To( RAS_VARS x1, y1, x2, y2, v_start.x, v_start.y ) )
goto Fail;
goto Close;
}
}
}
/* close the contour with a line segment */
if ( Line_To( RAS_VARS v_start.x, v_start.y ) )
goto Fail;
Close:
return SUCCESS;
Invalid_Outline:
ras.error = Raster_Err_Invalid;
Fail:
return FAILURE;
}
/*************************************************************************/
/* */
/* <Function> */
/* Convert_Glyph */
/* */
/* <Description> */
/* Convert a glyph into a series of segments and arcs and make a */
/* profiles list with them. */
/* */
/* <Input> */
/* flipped :: If set, flip the direction of curve. */
/* */
/* <Return> */
/* SUCCESS on success, FAILURE if any error was encountered during */
/* rendering. */
/* */
static Bool
Convert_Glyph( RAS_ARGS int flipped )
{
int i;
unsigned start;
PProfile lastProfile;
ras.fProfile = NULL;
ras.joint = FALSE;
ras.fresh = FALSE;
ras.maxBuff = ras.sizeBuff - AlignProfileSize;
ras.numTurns = 0;
ras.cProfile = (PProfile)ras.top;
ras.cProfile->offset = ras.top;
ras.num_Profs = 0;
start = 0;
for ( i = 0; i < ras.outline.n_contours; i++ )
{
Bool o;
ras.state = Unknown_State;
ras.gProfile = NULL;
if ( Decompose_Curve( RAS_VARS (unsigned short)start,
ras.outline.contours[i],
flipped ) )
return FAILURE;
start = ras.outline.contours[i] + 1;
/* we must now check whether the extreme arcs join or not */
if ( FRAC( ras.lastY ) == 0 &&
ras.lastY >= ras.minY &&
ras.lastY <= ras.maxY )
if ( ras.gProfile &&
( ras.gProfile->flags & Flow_Up ) ==
( ras.cProfile->flags & Flow_Up ) )
ras.top--;
/* Note that ras.gProfile can be nil if the contour was too small */
/* to be drawn. */
lastProfile = ras.cProfile;
if ( ras.cProfile->flags & Flow_Up )
o = IS_TOP_OVERSHOOT( ras.lastY );
else
o = IS_BOTTOM_OVERSHOOT( ras.lastY );
if ( End_Profile( RAS_VARS o ) )
return FAILURE;
/* close the `next profile in contour' linked list */
if ( ras.gProfile )
lastProfile->next = ras.gProfile;
}
if ( Finalize_Profile_Table( RAS_VAR ) )
return FAILURE;
return (Bool)( ras.top < ras.maxBuff ? SUCCESS : FAILURE );
}
/*************************************************************************/
/*************************************************************************/
/** **/
/** SCAN-LINE SWEEPS AND DRAWING **/
/** **/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* Init_Linked */
/* */
/* Initializes an empty linked list. */
/* */
static void
Init_Linked( TProfileList* l )
{
*l = NULL;
}
/*************************************************************************/
/* */
/* InsNew */
/* */
/* Inserts a new profile in a linked list. */
/* */
static void
InsNew( PProfileList list,
PProfile profile )
{
PProfile *old, current;
Long x;
old = list;
current = *old;
x = profile->X;
while ( current )
{
if ( x < current->X )
break;
old = &current->link;
current = *old;
}
profile->link = current;
*old = profile;
}
/*************************************************************************/
/* */
/* DelOld */
/* */
/* Removes an old profile from a linked list. */
/* */
static void
DelOld( PProfileList list,
PProfile profile )
{
PProfile *old, current;
old = list;
current = *old;
while ( current )
{
if ( current == profile )
{
*old = current->link;
return;
}
old = &current->link;
current = *old;
}
/* we should never get there, unless the profile was not part of */
/* the list. */
}
/*************************************************************************/
/* */
/* Sort */
/* */
/* Sorts a trace list. In 95%, the list is already sorted. We need */
/* an algorithm which is fast in this case. Bubble sort is enough */
/* and simple. */
/* */
static void
Sort( PProfileList list )
{
PProfile *old, current, next;
/* First, set the new X coordinate of each profile */
current = *list;
while ( current )
{
current->X = *current->offset;
current->offset += current->flags & Flow_Up ? 1 : -1;
current->height--;
current = current->link;
}
/* Then sort them */
old = list;
current = *old;
if ( !current )
return;
next = current->link;
while ( next )
{
if ( current->X <= next->X )
{
old = &current->link;
current = *old;
if ( !current )
return;
}
else
{
*old = next;
current->link = next->link;
next->link = current;
old = list;
current = *old;
}
next = current->link;
}
}
/*************************************************************************/
/* */
/* Vertical Sweep Procedure Set */
/* */
/* These four routines are used during the vertical black/white sweep */
/* phase by the generic Draw_Sweep() function. */
/* */
/*************************************************************************/
static void
Vertical_Sweep_Init( RAS_ARGS Short* min,
Short* max )
{
Long pitch = ras.target.pitch;
FT_UNUSED( max );
ras.traceIncr = (Short)-pitch;
ras.traceOfs = -*min * pitch;
if ( pitch > 0 )
ras.traceOfs += ( ras.target.rows - 1 ) * pitch;
ras.gray_min_x = 0;
ras.gray_max_x = 0;
}
static void
Vertical_Sweep_Span( RAS_ARGS Short y,
FT_F26Dot6 x1,
FT_F26Dot6 x2,
PProfile left,
PProfile right )
{
Long e1, e2;
int c1, c2;
Byte f1, f2;
Byte* target;
FT_UNUSED( y );
FT_UNUSED( left );
FT_UNUSED( right );
/* Drop-out control */
e1 = TRUNC( CEILING( x1 ) );
if ( x2 - x1 - ras.precision <= ras.precision_jitter )
e2 = e1;
else
e2 = TRUNC( FLOOR( x2 ) );
if ( e2 >= 0 && e1 < ras.bWidth )
{
if ( e1 < 0 )
e1 = 0;
if ( e2 >= ras.bWidth )
e2 = ras.bWidth - 1;
c1 = (Short)( e1 >> 3 );
c2 = (Short)( e2 >> 3 );
f1 = (Byte) ( 0xFF >> ( e1 & 7 ) );
f2 = (Byte) ~( 0x7F >> ( e2 & 7 ) );
if ( ras.gray_min_x > c1 )
ras.gray_min_x = (short)c1;
if ( ras.gray_max_x < c2 )
ras.gray_max_x = (short)c2;
target = ras.bTarget + ras.traceOfs + c1;
c2 -= c1;
if ( c2 > 0 )
{
target[0] |= f1;
/* memset() is slower than the following code on many platforms. */
/* This is due to the fact that, in the vast majority of cases, */
/* the span length in bytes is relatively small. */
c2--;
while ( c2 > 0 )
{
*(++target) = 0xFF;
c2--;
}
target[1] |= f2;
}
else
*target |= ( f1 & f2 );
}
}
static void
Vertical_Sweep_Drop( RAS_ARGS Short y,
FT_F26Dot6 x1,
FT_F26Dot6 x2,
PProfile left,
PProfile right )
{
Long e1, e2, pxl;
Short c1, f1;
/* Drop-out control */
/* e2 x2 x1 e1 */
/* */
/* ^ | */
/* | | */
/* +-------------+---------------------+------------+ */
/* | | */
/* | v */
/* */
/* pixel contour contour pixel */
/* center center */
/* drop-out mode scan conversion rules (as defined in OpenType) */
/* --------------------------------------------------------------- */
/* 0 1, 2, 3 */
/* 1 1, 2, 4 */
/* 2 1, 2 */
/* 3 same as mode 2 */
/* 4 1, 2, 5 */
/* 5 1, 2, 6 */
/* 6, 7 same as mode 2 */
e1 = CEILING( x1 );
e2 = FLOOR ( x2 );
pxl = e1;
if ( e1 > e2 )
{
Int dropOutControl = left->flags & 7;
if ( e1 == e2 + ras.precision )
{
switch ( dropOutControl )
{
/* simple drop-outs including stubs */
case 0:
pxl = e2;
break;
/* smart drop-outs including stubs */
case 4:
pxl = FLOOR( ( x1 + x2 - 1 ) / 2 + ras.precision_half );
break;
/* simple drop-outs excluding stubs */
case 1:
/* smart drop-outs excluding stubs */
case 5:
/* Drop-out Control Rules #4 and #6 */
/* The specification neither provides an exact definition */
/* of a `stub' nor gives exact rules to exclude them. */
/* */
/* Here the constraints we use to recognize a stub. */
/* */
/* upper stub: */
/* */
/* - P_Left and P_Right are in the same contour */
/* - P_Right is the successor of P_Left in that contour */
/* - y is the top of P_Left and P_Right */
/* */
/* lower stub: */
/* */
/* - P_Left and P_Right are in the same contour */
/* - P_Left is the successor of P_Right in that contour */
/* - y is the bottom of P_Left */
/* */
/* We draw a stub if the following constraints are met. */
/* */
/* - for an upper or lower stub, there is top or bottom */
/* overshoot, respectively */
/* - the covered interval is greater or equal to a half */
/* pixel */
/* upper stub test */
if ( left->next == right &&
left->height <= 0 &&
!( left->flags & Overshoot_Top &&
x2 - x1 >= ras.precision_half ) )
return;
/* lower stub test */
if ( right->next == left &&
left->start == y &&
!( left->flags & Overshoot_Bottom &&
x2 - x1 >= ras.precision_half ) )
return;
if ( dropOutControl == 1 )
pxl = e2;
else
pxl = FLOOR( ( x1 + x2 - 1 ) / 2 + ras.precision_half );
break;
/* modes 2, 3, 6, 7 */
default:
/* no drop-out control */
return;
}
/* undocumented but confirmed: If the drop-out would result in a */
/* pixel outside of the bounding box, use the pixel inside of the */
/* bounding box instead */
if ( pxl < 0 )
pxl = e1;
else if ( TRUNC( pxl ) >= ras.bWidth )
pxl = e2;
/* check that the other pixel isn't set */
e1 = pxl == e1 ? e2 : e1;
e1 = TRUNC( e1 );
c1 = (Short)( e1 >> 3 );
f1 = (Short)( e1 & 7 );
if ( e1 >= 0 && e1 < ras.bWidth &&
ras.bTarget[ras.traceOfs + c1] & ( 0x80 >> f1 ) )
return;
}
else
return;
}
e1 = TRUNC( pxl );
if ( e1 >= 0 && e1 < ras.bWidth )
{
c1 = (Short)( e1 >> 3 );
f1 = (Short)( e1 & 7 );
if ( ras.gray_min_x > c1 )
ras.gray_min_x = c1;
if ( ras.gray_max_x < c1 )
ras.gray_max_x = c1;
ras.bTarget[ras.traceOfs + c1] |= (char)( 0x80 >> f1 );
}
}
static void
Vertical_Sweep_Step( RAS_ARG )
{
ras.traceOfs += ras.traceIncr;
}
/***********************************************************************/
/* */
/* Horizontal Sweep Procedure Set */
/* */
/* These four routines are used during the horizontal black/white */
/* sweep phase by the generic Draw_Sweep() function. */
/* */
/***********************************************************************/
static void
Horizontal_Sweep_Init( RAS_ARGS Short* min,
Short* max )
{
/* nothing, really */
FT_UNUSED_RASTER;
FT_UNUSED( min );
FT_UNUSED( max );
}
static void
Horizontal_Sweep_Span( RAS_ARGS Short y,
FT_F26Dot6 x1,
FT_F26Dot6 x2,
PProfile left,
PProfile right )
{
Long e1, e2;
PByte bits;
Byte f1;
FT_UNUSED( left );
FT_UNUSED( right );
if ( x2 - x1 < ras.precision )
{
e1 = CEILING( x1 );
e2 = FLOOR ( x2 );
if ( e1 == e2 )
{
bits = ras.bTarget + ( y >> 3 );
f1 = (Byte)( 0x80 >> ( y & 7 ) );
e1 = TRUNC( e1 );
if ( e1 >= 0 && e1 < ras.target.rows )
{
PByte p;
p = bits - e1 * ras.target.pitch;
if ( ras.target.pitch > 0 )
p += ( ras.target.rows - 1 ) * ras.target.pitch;
p[0] |= f1;
}
}
}
}
static void
Horizontal_Sweep_Drop( RAS_ARGS Short y,
FT_F26Dot6 x1,
FT_F26Dot6 x2,
PProfile left,
PProfile right )
{
Long e1, e2, pxl;
PByte bits;
Byte f1;
/* During the horizontal sweep, we only take care of drop-outs */
/* e1 + <-- pixel center */
/* | */
/* x1 ---+--> <-- contour */
/* | */
/* | */
/* x2 <--+--- <-- contour */
/* | */
/* | */
/* e2 + <-- pixel center */
e1 = CEILING( x1 );
e2 = FLOOR ( x2 );
pxl = e1;
if ( e1 > e2 )
{
Int dropOutControl = left->flags & 7;
if ( e1 == e2 + ras.precision )
{
switch ( dropOutControl )
{
/* simple drop-outs including stubs */
case 0:
pxl = e2;
break;
/* smart drop-outs including stubs */
case 4:
pxl = FLOOR( ( x1 + x2 - 1 ) / 2 + ras.precision_half );
break;
/* simple drop-outs excluding stubs */
case 1:
/* smart drop-outs excluding stubs */
case 5:
/* see Vertical_Sweep_Drop for details */
/* rightmost stub test */
if ( left->next == right &&
left->height <= 0 &&
!( left->flags & Overshoot_Top &&
x2 - x1 >= ras.precision_half ) )
return;
/* leftmost stub test */
if ( right->next == left &&
left->start == y &&
!( left->flags & Overshoot_Bottom &&
x2 - x1 >= ras.precision_half ) )
return;
if ( dropOutControl == 1 )
pxl = e2;
else
pxl = FLOOR( ( x1 + x2 - 1 ) / 2 + ras.precision_half );
break;
/* modes 2, 3, 6, 7 */
default:
/* no drop-out control */
return;
}
/* undocumented but confirmed: If the drop-out would result in a */
/* pixel outside of the bounding box, use the pixel inside of the */
/* bounding box instead */
if ( pxl < 0 )
pxl = e1;
else if ( TRUNC( pxl ) >= ras.target.rows )
pxl = e2;
/* check that the other pixel isn't set */
e1 = pxl == e1 ? e2 : e1;
e1 = TRUNC( e1 );
bits = ras.bTarget + ( y >> 3 );
f1 = (Byte)( 0x80 >> ( y & 7 ) );
bits -= e1 * ras.target.pitch;
if ( ras.target.pitch > 0 )
bits += ( ras.target.rows - 1 ) * ras.target.pitch;
if ( e1 >= 0 &&
e1 < ras.target.rows &&
*bits & f1 )
return;
}
else
return;
}
bits = ras.bTarget + ( y >> 3 );
f1 = (Byte)( 0x80 >> ( y & 7 ) );
e1 = TRUNC( pxl );
if ( e1 >= 0 && e1 < ras.target.rows )
{
bits -= e1 * ras.target.pitch;
if ( ras.target.pitch > 0 )
bits += ( ras.target.rows - 1 ) * ras.target.pitch;
bits[0] |= f1;
}
}
static void
Horizontal_Sweep_Step( RAS_ARG )
{
/* Nothing, really */
FT_UNUSED_RASTER;
}
#ifdef FT_RASTER_OPTION_ANTI_ALIASING
/*************************************************************************/
/* */
/* Vertical Gray Sweep Procedure Set */
/* */
/* These two routines are used during the vertical gray-levels sweep */
/* phase by the generic Draw_Sweep() function. */
/* */
/* NOTES */
/* */
/* - The target pixmap's width *must* be a multiple of 4. */
/* */
/* - You have to use the function Vertical_Sweep_Span() for the gray */
/* span call. */
/* */
/*************************************************************************/
static void
Vertical_Gray_Sweep_Init( RAS_ARGS Short* min,
Short* max )
{
Long pitch, byte_len;
*min = *min & -2;
*max = ( *max + 3 ) & -2;
ras.traceOfs = 0;
pitch = ras.target.pitch;
byte_len = -pitch;
ras.traceIncr = (Short)byte_len;
ras.traceG = ( *min / 2 ) * byte_len;
if ( pitch > 0 )
{
ras.traceG += ( ras.target.rows - 1 ) * pitch;
byte_len = -byte_len;
}
ras.gray_min_x = (Short)byte_len;
ras.gray_max_x = -(Short)byte_len;
}
static void
Vertical_Gray_Sweep_Step( RAS_ARG )
{
Int c1, c2;
PByte pix, bit, bit2;
short* count = (short*)count_table;
Byte* grays;
ras.traceOfs += ras.gray_width;
if ( ras.traceOfs > ras.gray_width )
{
pix = ras.gTarget + ras.traceG + ras.gray_min_x * 4;
grays = ras.grays;
if ( ras.gray_max_x >= 0 )
{
Long last_pixel = ras.target.width - 1;
Int last_cell = last_pixel >> 2;
Int last_bit = last_pixel & 3;
Bool over = 0;
if ( ras.gray_max_x >= last_cell && last_bit != 3 )
{
ras.gray_max_x = last_cell - 1;
over = 1;
}
if ( ras.gray_min_x < 0 )
ras.gray_min_x = 0;
bit = ras.bTarget + ras.gray_min_x;
bit2 = bit + ras.gray_width;
c1 = ras.gray_max_x - ras.gray_min_x;
while ( c1 >= 0 )
{
c2 = count[*bit] + count[*bit2];
if ( c2 )
{
pix[0] = grays[(c2 >> 12) & 0x000F];
pix[1] = grays[(c2 >> 8 ) & 0x000F];
pix[2] = grays[(c2 >> 4 ) & 0x000F];
pix[3] = grays[ c2 & 0x000F];
*bit = 0;
*bit2 = 0;
}
bit++;
bit2++;
pix += 4;
c1--;
}
if ( over )
{
c2 = count[*bit] + count[*bit2];
if ( c2 )
{
switch ( last_bit )
{
case 2:
pix[2] = grays[(c2 >> 4 ) & 0x000F];
case 1:
pix[1] = grays[(c2 >> 8 ) & 0x000F];
default:
pix[0] = grays[(c2 >> 12) & 0x000F];
}
*bit = 0;
*bit2 = 0;
}
}
}
ras.traceOfs = 0;
ras.traceG += ras.traceIncr;
ras.gray_min_x = 32000;
ras.gray_max_x = -32000;
}
}
static void
Horizontal_Gray_Sweep_Span( RAS_ARGS Short y,
FT_F26Dot6 x1,
FT_F26Dot6 x2,
PProfile left,
PProfile right )
{
/* nothing, really */
FT_UNUSED_RASTER;
FT_UNUSED( y );
FT_UNUSED( x1 );
FT_UNUSED( x2 );
FT_UNUSED( left );
FT_UNUSED( right );
}
static void
Horizontal_Gray_Sweep_Drop( RAS_ARGS Short y,
FT_F26Dot6 x1,
FT_F26Dot6 x2,
PProfile left,
PProfile right )
{
Long e1, e2;
PByte pixel;
Byte color;
/* During the horizontal sweep, we only take care of drop-outs */
e1 = CEILING( x1 );
e2 = FLOOR ( x2 );
if ( e1 > e2 )
{
Int dropOutControl = left->flags & 7;
if ( e1 == e2 + ras.precision )
{
switch ( dropOutControl )
{
/* simple drop-outs including stubs */
case 0:
e1 = e2;
break;
/* smart drop-outs including stubs */
case 4:
e1 = FLOOR( ( x1 + x2 - 1 ) / 2 + ras.precision_half );
break;
/* simple drop-outs excluding stubs */
case 1:
/* smart drop-outs excluding stubs */
case 5:
/* see Vertical_Sweep_Drop for details */
/* rightmost stub test */
if ( left->next == right && left->height <= 0 )
return;
/* leftmost stub test */
if ( right->next == left && left->start == y )
return;
if ( dropOutControl == 1 )
e1 = e2;
else
e1 = FLOOR( ( x1 + x2 - 1 ) / 2 + ras.precision_half );
break;
/* modes 2, 3, 6, 7 */
default:
/* no drop-out control */
return;
}
}
else
return;
}
if ( e1 >= 0 )
{
if ( x2 - x1 >= ras.precision_half )
color = ras.grays[2];
else
color = ras.grays[1];
e1 = TRUNC( e1 ) / 2;
if ( e1 < ras.target.rows )
{
pixel = ras.gTarget - e1 * ras.target.pitch + y / 2;
if ( ras.target.pitch > 0 )
pixel += ( ras.target.rows - 1 ) * ras.target.pitch;
if ( pixel[0] == ras.grays[0] )
pixel[0] = color;
}
}
}
/* FT_RASTER_OPTION_ANTI_ALIASING */
#endif
/*************************************************************************/
/* */
/* Generic Sweep Drawing routine */
/* */
/*************************************************************************/
static Bool
Draw_Sweep( RAS_ARG )
{
Short y, y_change, y_height;
PProfile P, Q, P_Left, P_Right;
Short min_Y, max_Y, top, bottom, dropouts;
Long x1, x2, xs, e1, e2;
TProfileList waiting;
TProfileList draw_left, draw_right;
/* initialize empty linked lists */
Init_Linked( &waiting );
Init_Linked( &draw_left );
Init_Linked( &draw_right );
/* first, compute min and max Y */
P = ras.fProfile;
max_Y = (Short)TRUNC( ras.minY );
min_Y = (Short)TRUNC( ras.maxY );
while ( P )
{
Q = P->link;
bottom = (Short)P->start;
top = (Short)( P->start + P->height - 1 );
if ( min_Y > bottom )
min_Y = bottom;
if ( max_Y < top )
max_Y = top;
P->X = 0;
InsNew( &waiting, P );
P = Q;
}
/* check the Y-turns */
if ( ras.numTurns == 0 )
{
ras.error = Raster_Err_Invalid;
return FAILURE;
}
/* now initialize the sweep */
ras.Proc_Sweep_Init( RAS_VARS &min_Y, &max_Y );
/* then compute the distance of each profile from min_Y */
P = waiting;
while ( P )
{
P->countL = (UShort)( P->start - min_Y );
P = P->link;
}
/* let's go */
y = min_Y;
y_height = 0;
if ( ras.numTurns > 0 &&
ras.sizeBuff[-ras.numTurns] == min_Y )
ras.numTurns--;
while ( ras.numTurns > 0 )
{
/* check waiting list for new activations */
P = waiting;
while ( P )
{
Q = P->link;
P->countL -= y_height;
if ( P->countL == 0 )
{
DelOld( &waiting, P );
if ( P->flags & Flow_Up )
InsNew( &draw_left, P );
else
InsNew( &draw_right, P );
}
P = Q;
}
/* sort the drawing lists */
Sort( &draw_left );
Sort( &draw_right );
y_change = (Short)ras.sizeBuff[-ras.numTurns--];
y_height = (Short)( y_change - y );
while ( y < y_change )
{
/* let's trace */
dropouts = 0;
P_Left = draw_left;
P_Right = draw_right;
while ( P_Left )
{
x1 = P_Left ->X;
x2 = P_Right->X;
if ( x1 > x2 )
{
xs = x1;
x1 = x2;
x2 = xs;
}
e1 = FLOOR( x1 );
e2 = CEILING( x2 );
if ( x2 - x1 <= ras.precision &&
e1 != x1 && e2 != x2 )
{
if ( e1 > e2 || e2 == e1 + ras.precision )
{
Int dropOutControl = P_Left->flags & 7;
if ( dropOutControl != 2 )
{
/* a drop-out was detected */
P_Left ->X = x1;
P_Right->X = x2;
/* mark profile for drop-out processing */
P_Left->countL = 1;
dropouts++;
}
goto Skip_To_Next;
}
}
ras.Proc_Sweep_Span( RAS_VARS y, x1, x2, P_Left, P_Right );
Skip_To_Next:
P_Left = P_Left->link;
P_Right = P_Right->link;
}
/* handle drop-outs _after_ the span drawing -- */
/* drop-out processing has been moved out of the loop */
/* for performance tuning */
if ( dropouts > 0 )
goto Scan_DropOuts;
Next_Line:
ras.Proc_Sweep_Step( RAS_VAR );
y++;
if ( y < y_change )
{
Sort( &draw_left );
Sort( &draw_right );
}
}
/* now finalize the profiles that need it */
P = draw_left;
while ( P )
{
Q = P->link;
if ( P->height == 0 )
DelOld( &draw_left, P );
P = Q;
}
P = draw_right;
while ( P )
{
Q = P->link;
if ( P->height == 0 )
DelOld( &draw_right, P );
P = Q;
}
}
/* for gray-scaling, flush the bitmap scanline cache */
while ( y <= max_Y )
{
ras.Proc_Sweep_Step( RAS_VAR );
y++;
}
return SUCCESS;
Scan_DropOuts:
P_Left = draw_left;
P_Right = draw_right;
while ( P_Left )
{
if ( P_Left->countL )
{
P_Left->countL = 0;
#if 0
/* -- this is useful when debugging only */
dropouts--;
#endif
ras.Proc_Sweep_Drop( RAS_VARS y,
P_Left->X,
P_Right->X,
P_Left,
P_Right );
}
P_Left = P_Left->link;
P_Right = P_Right->link;
}
goto Next_Line;
}
/*************************************************************************/
/* */
/* <Function> */
/* Render_Single_Pass */
/* */
/* <Description> */
/* Perform one sweep with sub-banding. */
/* */
/* <Input> */
/* flipped :: If set, flip the direction of the outline. */
/* */
/* <Return> */
/* Renderer error code. */
/* */
static int
Render_Single_Pass( RAS_ARGS Bool flipped )
{
Short i, j, k;
while ( ras.band_top >= 0 )
{
ras.maxY = (Long)ras.band_stack[ras.band_top].y_max * ras.precision;
ras.minY = (Long)ras.band_stack[ras.band_top].y_min * ras.precision;
ras.top = ras.buff;
ras.error = Raster_Err_None;
if ( Convert_Glyph( RAS_VARS flipped ) )
{
if ( ras.error != Raster_Err_Overflow )
return FAILURE;
ras.error = Raster_Err_None;
/* sub-banding */
#ifdef DEBUG_RASTER
ClearBand( RAS_VARS TRUNC( ras.minY ), TRUNC( ras.maxY ) );
#endif
i = ras.band_stack[ras.band_top].y_min;
j = ras.band_stack[ras.band_top].y_max;
k = (Short)( ( i + j ) / 2 );
if ( ras.band_top >= 7 || k < i )
{
ras.band_top = 0;
ras.error = Raster_Err_Invalid;
return ras.error;
}
ras.band_stack[ras.band_top + 1].y_min = k;
ras.band_stack[ras.band_top + 1].y_max = j;
ras.band_stack[ras.band_top].y_max = (Short)( k - 1 );
ras.band_top++;
}
else
{
if ( ras.fProfile )
if ( Draw_Sweep( RAS_VAR ) )
return ras.error;
ras.band_top--;
}
}
return SUCCESS;
}
/*************************************************************************/
/* */
/* <Function> */
/* Render_Glyph */
/* */
/* <Description> */
/* Render a glyph in a bitmap. Sub-banding if needed. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
Render_Glyph( RAS_ARG )
{
FT_Error error;
Set_High_Precision( RAS_VARS ras.outline.flags &
FT_OUTLINE_HIGH_PRECISION );
ras.scale_shift = ras.precision_shift;
if ( ras.outline.flags & FT_OUTLINE_IGNORE_DROPOUTS )
ras.dropOutControl = 2;
else
{
if ( ras.outline.flags & FT_OUTLINE_SMART_DROPOUTS )
ras.dropOutControl = 4;
else
ras.dropOutControl = 0;
if ( !( ras.outline.flags & FT_OUTLINE_INCLUDE_STUBS ) )
ras.dropOutControl += 1;
}
ras.second_pass = (FT_Byte)( !( ras.outline.flags &
FT_OUTLINE_SINGLE_PASS ) );
/* Vertical Sweep */
ras.Proc_Sweep_Init = Vertical_Sweep_Init;
ras.Proc_Sweep_Span = Vertical_Sweep_Span;
ras.Proc_Sweep_Drop = Vertical_Sweep_Drop;
ras.Proc_Sweep_Step = Vertical_Sweep_Step;
ras.band_top = 0;
ras.band_stack[0].y_min = 0;
ras.band_stack[0].y_max = (short)( ras.target.rows - 1 );
ras.bWidth = (unsigned short)ras.target.width;
ras.bTarget = (Byte*)ras.target.buffer;
if ( ( error = Render_Single_Pass( RAS_VARS 0 ) ) != 0 )
return error;
/* Horizontal Sweep */
if ( ras.second_pass && ras.dropOutControl != 2 )
{
ras.Proc_Sweep_Init = Horizontal_Sweep_Init;
ras.Proc_Sweep_Span = Horizontal_Sweep_Span;
ras.Proc_Sweep_Drop = Horizontal_Sweep_Drop;
ras.Proc_Sweep_Step = Horizontal_Sweep_Step;
ras.band_top = 0;
ras.band_stack[0].y_min = 0;
ras.band_stack[0].y_max = (short)( ras.target.width - 1 );
if ( ( error = Render_Single_Pass( RAS_VARS 1 ) ) != 0 )
return error;
}
return Raster_Err_None;
}
#ifdef FT_RASTER_OPTION_ANTI_ALIASING
/*************************************************************************/
/* */
/* <Function> */
/* Render_Gray_Glyph */
/* */
/* <Description> */
/* Render a glyph with grayscaling. Sub-banding if needed. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
Render_Gray_Glyph( RAS_ARG )
{
Long pixel_width;
FT_Error error;
Set_High_Precision( RAS_VARS ras.outline.flags &
FT_OUTLINE_HIGH_PRECISION );
ras.scale_shift = ras.precision_shift + 1;
if ( ras.outline.flags & FT_OUTLINE_IGNORE_DROPOUTS )
ras.dropOutControl = 2;
else
{
if ( ras.outline.flags & FT_OUTLINE_SMART_DROPOUTS )
ras.dropOutControl = 4;
else
ras.dropOutControl = 0;
if ( !( ras.outline.flags & FT_OUTLINE_INCLUDE_STUBS ) )
ras.dropOutControl += 1;
}
ras.second_pass = !( ras.outline.flags & FT_OUTLINE_SINGLE_PASS );
/* Vertical Sweep */
ras.band_top = 0;
ras.band_stack[0].y_min = 0;
ras.band_stack[0].y_max = 2 * ras.target.rows - 1;
ras.bWidth = ras.gray_width;
pixel_width = 2 * ( ( ras.target.width + 3 ) >> 2 );
if ( ras.bWidth > pixel_width )
ras.bWidth = pixel_width;
ras.bWidth = ras.bWidth * 8;
ras.bTarget = (Byte*)ras.gray_lines;
ras.gTarget = (Byte*)ras.target.buffer;
ras.Proc_Sweep_Init = Vertical_Gray_Sweep_Init;
ras.Proc_Sweep_Span = Vertical_Sweep_Span;
ras.Proc_Sweep_Drop = Vertical_Sweep_Drop;
ras.Proc_Sweep_Step = Vertical_Gray_Sweep_Step;
error = Render_Single_Pass( RAS_VARS 0 );
if ( error )
return error;
/* Horizontal Sweep */
if ( ras.second_pass && ras.dropOutControl != 2 )
{
ras.Proc_Sweep_Init = Horizontal_Sweep_Init;
ras.Proc_Sweep_Span = Horizontal_Gray_Sweep_Span;
ras.Proc_Sweep_Drop = Horizontal_Gray_Sweep_Drop;
ras.Proc_Sweep_Step = Horizontal_Sweep_Step;
ras.band_top = 0;
ras.band_stack[0].y_min = 0;
ras.band_stack[0].y_max = ras.target.width * 2 - 1;
error = Render_Single_Pass( RAS_VARS 1 );
if ( error )
return error;
}
return Raster_Err_None;
}
/* !FT_RASTER_OPTION_ANTI_ALIASING */
#else
FT_LOCAL_DEF( FT_Error )
Render_Gray_Glyph( RAS_ARG )
{
FT_UNUSED_RASTER;
return Raster_Err_Unsupported;
}
/* !FT_RASTER_OPTION_ANTI_ALIASING */
#endif
static void
ft_black_init( black_PRaster raster )
{
#ifdef FT_RASTER_OPTION_ANTI_ALIASING
FT_UInt n;
/* set default 5-levels gray palette */
for ( n = 0; n < 5; n++ )
raster->grays[n] = n * 255 / 4;
raster->gray_width = RASTER_GRAY_LINES / 2;
#else
FT_UNUSED( raster );
#endif
}
/**** RASTER OBJECT CREATION: In standalone mode, we simply use *****/
/**** a static object. *****/
#ifdef _STANDALONE_
static int
ft_black_new( void* memory,
FT_Raster *araster )
{
static black_TRaster the_raster;
FT_UNUSED( memory );
*araster = (FT_Raster)&the_raster;
FT_MEM_ZERO( &the_raster, sizeof ( the_raster ) );
ft_black_init( &the_raster );
return 0;
}
static void
ft_black_done( FT_Raster raster )
{
/* nothing */
FT_UNUSED( raster );
}
/* !_STANDALONE_ */
#else
static int
ft_black_new( FT_Memory memory,
black_PRaster *araster )
{
FT_Error error;
black_PRaster raster = NULL;
*araster = 0;
if ( !FT_NEW( raster ) )
{
raster->memory = memory;
ft_black_init( raster );
*araster = raster;
}
return error;
}
static void
ft_black_done( black_PRaster raster )
{
FT_Memory memory = (FT_Memory)raster->memory;
FT_FREE( raster );
}
/* !_STANDALONE_ */
#endif
static void
ft_black_reset( black_PRaster raster,
char* pool_base,
long pool_size )
{
if ( raster )
{
if ( pool_base && pool_size >= (long)sizeof ( black_TWorker ) + 2048 )
{
black_PWorker worker = (black_PWorker)pool_base;
raster->buffer = pool_base + ( ( sizeof ( *worker ) + 7 ) & ~7 );
raster->buffer_size = pool_base + pool_size - (char*)raster->buffer;
raster->worker = worker;
}
else
{
raster->buffer = NULL;
raster->buffer_size = 0;
raster->worker = NULL;
}
}
}
static void
ft_black_set_mode( black_PRaster raster,
unsigned long mode,
const char* palette )
{
#ifdef FT_RASTER_OPTION_ANTI_ALIASING
if ( mode == FT_MAKE_TAG( 'p', 'a', 'l', '5' ) )
{
/* set 5-levels gray palette */
raster->grays[0] = palette[0];
raster->grays[1] = palette[1];
raster->grays[2] = palette[2];
raster->grays[3] = palette[3];
raster->grays[4] = palette[4];
}
#else
FT_UNUSED( raster );
FT_UNUSED( mode );
FT_UNUSED( palette );
#endif
}
static int
ft_black_render( black_PRaster raster,
const FT_Raster_Params* params )
{
const FT_Outline* outline = (const FT_Outline*)params->source;
const FT_Bitmap* target_map = params->target;
black_PWorker worker;
if ( !raster || !raster->buffer || !raster->buffer_size )
return Raster_Err_Not_Ini;
if ( !outline )
return Raster_Err_Invalid;
/* return immediately if the outline is empty */
if ( outline->n_points == 0 || outline->n_contours <= 0 )
return Raster_Err_None;
if ( !outline->contours || !outline->points )
return Raster_Err_Invalid;
if ( outline->n_points !=
outline->contours[outline->n_contours - 1] + 1 )
return Raster_Err_Invalid;
worker = raster->worker;
/* this version of the raster does not support direct rendering, sorry */
if ( params->flags & FT_RASTER_FLAG_DIRECT )
return Raster_Err_Unsupported;
if ( !target_map )
return Raster_Err_Invalid;
/* nothing to do */
if ( !target_map->width || !target_map->rows )
return Raster_Err_None;
if ( !target_map->buffer )
return Raster_Err_Invalid;
ras.outline = *outline;
ras.target = *target_map;
worker->buff = (PLong) raster->buffer;
worker->sizeBuff = worker->buff +
raster->buffer_size / sizeof ( Long );
#ifdef FT_RASTER_OPTION_ANTI_ALIASING
worker->grays = raster->grays;
worker->gray_width = raster->gray_width;
FT_MEM_ZERO( worker->gray_lines, worker->gray_width * 2 );
#endif
return ( params->flags & FT_RASTER_FLAG_AA )
? Render_Gray_Glyph( RAS_VAR )
: Render_Glyph( RAS_VAR );
}
FT_DEFINE_RASTER_FUNCS( ft_standard_raster,
FT_GLYPH_FORMAT_OUTLINE,
(FT_Raster_New_Func) ft_black_new,
(FT_Raster_Reset_Func) ft_black_reset,
(FT_Raster_Set_Mode_Func)ft_black_set_mode,
(FT_Raster_Render_Func) ft_black_render,
(FT_Raster_Done_Func) ft_black_done
)
/* END */
/***************************************************************************/
/* */
/* ftrend1.c */
/* */
/* The FreeType glyph rasterizer interface (body). */
/* */
/* Copyright 1996-2003, 2005, 2006, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftrend1.h */
/* */
/* The FreeType glyph rasterizer interface (specification). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTREND1_H__
FT_BEGIN_HEADER
FT_DECLARE_RENDERER( ft_raster1_renderer_class )
/* this renderer is _NOT_ part of the default modules, you'll need */
/* to register it by hand in your application. It should only be */
/* used for backwards-compatibility with FT 1.x anyway. */
/* */
FT_DECLARE_RENDERER( ft_raster5_renderer_class )
FT_END_HEADER
/* END */
/* initialize renderer -- init its raster */
static FT_Error
ft_raster1_init( FT_Renderer render )
{
FT_Library library = FT_MODULE_LIBRARY( render );
render->clazz->raster_class->raster_reset( render->raster,
library->raster_pool,
library->raster_pool_size );
return Raster_Err_Ok;
}
/* set render-specific mode */
static FT_Error
ft_raster1_set_mode( FT_Renderer render,
FT_ULong mode_tag,
FT_Pointer data )
{
/* we simply pass it to the raster */
return render->clazz->raster_class->raster_set_mode( render->raster,
mode_tag,
data );
}
/* transform a given glyph image */
static FT_Error
ft_raster1_transform( FT_Renderer render,
FT_GlyphSlot slot,
const FT_Matrix* matrix,
const FT_Vector* delta )
{
FT_Error error = Raster_Err_Ok;
if ( slot->format != render->glyph_format )
{
error = Raster_Err_Invalid_Argument;
goto Exit;
}
if ( matrix )
FT_Outline_Transform( &slot->outline, matrix );
if ( delta )
FT_Outline_Translate( &slot->outline, delta->x, delta->y );
Exit:
return error;
}
/* return the glyph's control box */
static void
ft_raster1_get_cbox( FT_Renderer render,
FT_GlyphSlot slot,
FT_BBox* cbox )
{
FT_MEM_ZERO( cbox, sizeof ( *cbox ) );
if ( slot->format == render->glyph_format )
FT_Outline_Get_CBox( &slot->outline, cbox );
}
/* convert a slot's glyph image into a bitmap */
static FT_Error
ft_raster1_render( FT_Renderer render,
FT_GlyphSlot slot,
FT_Render_Mode mode,
const FT_Vector* origin )
{
FT_Error error;
FT_Outline* outline;
FT_BBox cbox;
FT_UInt width, height, pitch;
FT_Bitmap* bitmap;
FT_Memory memory;
FT_Raster_Params params;
/* check glyph image format */
if ( slot->format != render->glyph_format )
{
error = Raster_Err_Invalid_Argument;
goto Exit;
}
/* check rendering mode */
if ( mode != FT_RENDER_MODE_MONO )
{
/* raster1 is only capable of producing monochrome bitmaps */
if ( render->clazz == &ft_raster1_renderer_class )
return Raster_Err_Cannot_Render_Glyph;
}
else
{
/* raster5 is only capable of producing 5-gray-levels bitmaps */
if ( render->clazz == &ft_raster5_renderer_class )
return Raster_Err_Cannot_Render_Glyph;
}
outline = &slot->outline;
/* translate the outline to the new origin if needed */
if ( origin )
FT_Outline_Translate( outline, origin->x, origin->y );
/* compute the control box, and grid fit it */
FT_Outline_Get_CBox( outline, &cbox );
/* undocumented but confirmed: bbox values get rounded */
#if 1
cbox.xMin = FT_PIX_ROUND( cbox.xMin );
cbox.yMin = FT_PIX_ROUND( cbox.yMin );
cbox.xMax = FT_PIX_ROUND( cbox.xMax );
cbox.yMax = FT_PIX_ROUND( cbox.yMax );
#else
cbox.xMin = FT_PIX_FLOOR( cbox.xMin );
cbox.yMin = FT_PIX_FLOOR( cbox.yMin );
cbox.xMax = FT_PIX_CEIL( cbox.xMax );
cbox.yMax = FT_PIX_CEIL( cbox.yMax );
#endif
width = (FT_UInt)( ( cbox.xMax - cbox.xMin ) >> 6 );
height = (FT_UInt)( ( cbox.yMax - cbox.yMin ) >> 6 );
if ( width > FT_USHORT_MAX || height > FT_USHORT_MAX )
{
error = Raster_Err_Invalid_Argument;
goto Exit;
}
bitmap = &slot->bitmap;
memory = render->root.memory;
/* release old bitmap buffer */
if ( slot->internal->flags & FT_GLYPH_OWN_BITMAP )
{
FT_FREE( bitmap->buffer );
slot->internal->flags &= ~FT_GLYPH_OWN_BITMAP;
}
/* allocate new one, depends on pixel format */
if ( !( mode & FT_RENDER_MODE_MONO ) )
{
/* we pad to 32 bits, only for backwards compatibility with FT 1.x */
pitch = FT_PAD_CEIL( width, 4 );
bitmap->pixel_mode = FT_PIXEL_MODE_GRAY;
bitmap->num_grays = 256;
}
else
{
pitch = ( ( width + 15 ) >> 4 ) << 1;
bitmap->pixel_mode = FT_PIXEL_MODE_MONO;
}
bitmap->width = width;
bitmap->rows = height;
bitmap->pitch = pitch;
if ( FT_ALLOC_MULT( bitmap->buffer, pitch, height ) )
goto Exit;
slot->internal->flags |= FT_GLYPH_OWN_BITMAP;
/* translate outline to render it into the bitmap */
FT_Outline_Translate( outline, -cbox.xMin, -cbox.yMin );
/* set up parameters */
params.target = bitmap;
params.source = outline;
params.flags = 0;
if ( bitmap->pixel_mode == FT_PIXEL_MODE_GRAY )
params.flags |= FT_RASTER_FLAG_AA;
/* render outline into the bitmap */
error = render->raster_render( render->raster, &params );
FT_Outline_Translate( outline, cbox.xMin, cbox.yMin );
if ( error )
goto Exit;
slot->format = FT_GLYPH_FORMAT_BITMAP;
slot->bitmap_left = (FT_Int)( cbox.xMin >> 6 );
slot->bitmap_top = (FT_Int)( cbox.yMax >> 6 );
Exit:
return error;
}
FT_DEFINE_RENDERER( ft_raster1_renderer_class,
FT_MODULE_RENDERER,
sizeof ( FT_RendererRec ),
"raster1",
0x10000L,
0x20000L,
/* module specific interface */
0,
(FT_Module_Constructor)ft_raster1_init,
(FT_Module_Destructor) 0,
(FT_Module_Requester) 0
,
FT_GLYPH_FORMAT_OUTLINE,
(FT_Renderer_RenderFunc) ft_raster1_render,
(FT_Renderer_TransformFunc)ft_raster1_transform,
(FT_Renderer_GetCBoxFunc) ft_raster1_get_cbox,
(FT_Renderer_SetModeFunc) ft_raster1_set_mode,
(FT_Raster_Funcs*) &FT_STANDARD_RASTER_GET
)
/* This renderer is _NOT_ part of the default modules; you will need */
/* to register it by hand in your application. It should only be */
/* used for backwards-compatibility with FT 1.x anyway. */
/* */
FT_DEFINE_RENDERER( ft_raster5_renderer_class,
FT_MODULE_RENDERER,
sizeof ( FT_RendererRec ),
"raster5",
0x10000L,
0x20000L,
/* module specific interface */
0,
(FT_Module_Constructor)ft_raster1_init,
(FT_Module_Destructor) 0,
(FT_Module_Requester) 0
,
FT_GLYPH_FORMAT_OUTLINE,
(FT_Renderer_RenderFunc) ft_raster1_render,
(FT_Renderer_TransformFunc)ft_raster1_transform,
(FT_Renderer_GetCBoxFunc) ft_raster1_get_cbox,
(FT_Renderer_SetModeFunc) ft_raster1_set_mode,
(FT_Raster_Funcs*) &FT_STANDARD_RASTER_GET
)
/* END */
/* END */
/***************************************************************************/
/* */
/* smooth.c */
/* */
/* FreeType anti-aliasing rasterer module component (body only). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* ftspic.c */
/* */
/* The FreeType position independent code services for smooth module. */
/* */
/* Copyright 2009, 2010, 2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftspic.h */
/* */
/* The FreeType position independent code services for smooth module. */
/* */
/* Copyright 2009 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTSPIC_H__
FT_BEGIN_HEADER
#define FT_GRAYS_RASTER_GET ft_grays_raster
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* ftsmerrs.h */
/* */
/* smooth renderer error codes (specification only). */
/* */
/* Copyright 2001, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the smooth renderer error enumeration */
/* constants. */
/* */
/*************************************************************************/
#define __FTSMERRS_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX Smooth_Err_
#define FT_ERR_BASE FT_Mod_Err_Smooth
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/* END */
/***************************************************************************/
/* */
/* ftgrays.c */
/* */
/* A new `perfect' anti-aliasing renderer (body). */
/* */
/* Copyright 2000-2003, 2005-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file can be compiled without the rest of the FreeType engine, by */
/* defining the _STANDALONE_ macro when compiling it. You also need to */
/* put the files `ftgrays.h' and `ftimage.h' into the current */
/* compilation directory. Typically, you could do something like */
/* */
/* - copy `src/smooth/ftgrays.c' (this file) to your current directory */
/* */
/* - copy `include/freetype/ftimage.h' and `src/smooth/ftgrays.h' to the */
/* same directory */
/* */
/* - compile `ftgrays' with the _STANDALONE_ macro defined, as in */
/* */
/* cc -c -D_STANDALONE_ ftgrays.c */
/* */
/* The renderer can be initialized with a call to */
/* `ft_gray_raster.raster_new'; an anti-aliased bitmap can be generated */
/* with a call to `ft_gray_raster.raster_render'. */
/* */
/* See the comments and documentation in the file `ftimage.h' for more */
/* details on how the raster works. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* This is a new anti-aliasing scan-converter for FreeType 2. The */
/* algorithm used here is _very_ different from the one in the standard */
/* `ftraster' module. Actually, `ftgrays' computes the _exact_ */
/* coverage of the outline on each pixel cell. */
/* */
/* It is based on ideas that I initially found in Raph Levien's */
/* excellent LibArt graphics library (see http://www.levien.com/libart */
/* for more information, though the web pages do not tell anything */
/* about the renderer; you'll have to dive into the source code to */
/* understand how it works). */
/* */
/* Note, however, that this is a _very_ different implementation */
/* compared to Raph's. Coverage information is stored in a very */
/* different way, and I don't use sorted vector paths. Also, it doesn't */
/* use floating point values. */
/* */
/* This renderer has the following advantages: */
/* */
/* - It doesn't need an intermediate bitmap. Instead, one can supply a */
/* callback function that will be called by the renderer to draw gray */
/* spans on any target surface. You can thus do direct composition on */
/* any kind of bitmap, provided that you give the renderer the right */
/* callback. */
/* */
/* - A perfect anti-aliaser, i.e., it computes the _exact_ coverage on */
/* each pixel cell. */
/* */
/* - It performs a single pass on the outline (the `standard' FT2 */
/* renderer makes two passes). */
/* */
/* - It can easily be modified to render to _any_ number of gray levels */
/* cheaply. */
/* */
/* - For small (< 20) pixel sizes, it is faster than the standard */
/* renderer. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_smooth
#ifdef _STANDALONE_
/* define this to dump debugging information */
/* #define FT_DEBUG_LEVEL_TRACE */
#include <stddef.h>
#include <string.h>
#include <setjmp.h>
#include <limits.h>
#define FT_UINT_MAX UINT_MAX
#define FT_INT_MAX INT_MAX
#define ft_memset memset
#define ft_setjmp setjmp
#define ft_longjmp longjmp
#define ft_jmp_buf jmp_buf
typedef ptrdiff_t FT_PtrDist;
#define ErrRaster_Invalid_Mode -2
#define ErrRaster_Invalid_Outline -1
#define ErrRaster_Invalid_Argument -3
#define ErrRaster_Memory_Overflow -4
#define FT_BEGIN_HEADER
#define FT_END_HEADER
#include "ftimage.h"
/***************************************************************************/
/* */
/* ftgrays.h */
/* */
/* FreeType smooth renderer declaration */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTGRAYS_H__
#ifdef __cplusplus
extern "C" {
#endif
#ifdef _STANDALONE_
#include "ftimage.h"
#else
/* for FT_CONFIG_OPTION_PIC */
#endif
/*************************************************************************/
/* */
/* To make ftgrays.h independent from configuration files we check */
/* whether FT_EXPORT_VAR has been defined already. */
/* */
/* On some systems and compilers (Win32 mostly), an extra keyword is */
/* necessary to compile the library as a DLL. */
/* */
#ifndef FT_EXPORT_VAR
#define FT_EXPORT_VAR( x ) extern x
#endif
FT_EXPORT_VAR( const FT_Raster_Funcs ) ft_grays_raster;
#ifdef __cplusplus
}
#endif
/* END */
/* This macro is used to indicate that a function parameter is unused. */
/* Its purpose is simply to reduce compiler warnings. Note also that */
/* simply defining it as `(void)x' doesn't avoid warnings with certain */
/* ANSI compilers (e.g. LCC). */
#define FT_UNUSED( x ) (x) = (x)
/* we only use level 5 & 7 tracing messages; cf. ftdebug.h */
/* nothing */
#define FT_TRACE5( x ) do { } while ( 0 )
/* nothing */
#define FT_TRACE7( x ) do { } while ( 0 )
/* nothing */
#define FT_ERROR( x ) do { } while ( 0 )
#define FT_DEFINE_OUTLINE_FUNCS( class_, \
move_to_, line_to_, \
conic_to_, cubic_to_, \
shift_, delta_ ) \
static const FT_Outline_Funcs class_ = \
{ \
move_to_, \
line_to_, \
conic_to_, \
cubic_to_, \
shift_, \
delta_ \
};
#define FT_DEFINE_RASTER_FUNCS( class_, glyph_format_, \
raster_new_, raster_reset_, \
raster_set_mode_, raster_render_, \
raster_done_ ) \
const FT_Raster_Funcs class_ = \
{ \
glyph_format_, \
raster_new_, \
raster_reset_, \
raster_set_mode_, \
raster_render_, \
raster_done_ \
};
/* !_STANDALONE_ */
#else
#define ErrRaster_Invalid_Mode Smooth_Err_Cannot_Render_Glyph
#define ErrRaster_Invalid_Outline Smooth_Err_Invalid_Outline
#define ErrRaster_Memory_Overflow Smooth_Err_Out_Of_Memory
#define ErrRaster_Invalid_Argument Smooth_Err_Invalid_Argument
/* !_STANDALONE_ */
#endif
#ifndef FT_MEM_SET
#define FT_MEM_SET( d, s, c ) ft_memset( d, s, c )
#endif
#ifndef FT_MEM_ZERO
#define FT_MEM_ZERO( dest, count ) FT_MEM_SET( dest, 0, count )
#endif
/* as usual, for the speed hungry :-) */
#undef RAS_ARG
#undef RAS_ARG_
#undef RAS_VAR
#undef RAS_VAR_
#ifndef FT_STATIC_RASTER
#define RAS_ARG gray_PWorker worker
#define RAS_ARG_ gray_PWorker worker,
#define RAS_VAR worker
#define RAS_VAR_ worker,
/* FT_STATIC_RASTER */
#else
/* empty */
#define RAS_ARG
/* empty */
#define RAS_ARG_
/* empty */
#define RAS_VAR
/* empty */
#define RAS_VAR_
/* FT_STATIC_RASTER */
#endif
/* must be at least 6 bits! */
#define PIXEL_BITS 8
#undef FLOOR
#undef CEILING
#undef TRUNC
#undef SCALED
#define ONE_PIXEL ( 1L << PIXEL_BITS )
#define PIXEL_MASK ( -1L << PIXEL_BITS )
#define TRUNC( x ) ( (TCoord)( (x) >> PIXEL_BITS ) )
#define SUBPIXELS( x ) ( (TPos)(x) << PIXEL_BITS )
#define FLOOR( x ) ( (x) & -ONE_PIXEL )
#define CEILING( x ) ( ( (x) + ONE_PIXEL - 1 ) & -ONE_PIXEL )
#define ROUND( x ) ( ( (x) + ONE_PIXEL / 2 ) & -ONE_PIXEL )
#if PIXEL_BITS >= 6
#define UPSCALE( x ) ( (x) << ( PIXEL_BITS - 6 ) )
#define DOWNSCALE( x ) ( (x) >> ( PIXEL_BITS - 6 ) )
#else
#define UPSCALE( x ) ( (x) >> ( 6 - PIXEL_BITS ) )
#define DOWNSCALE( x ) ( (x) << ( 6 - PIXEL_BITS ) )
#endif
/*************************************************************************/
/* */
/* TYPE DEFINITIONS */
/* */
/* don't change the following types to FT_Int or FT_Pos, since we might */
/* need to define them to "float" or "double" when experimenting with */
/* new algorithms */
/* integer scanline/pixel coordinate */
typedef long TCoord;
/* sub-pixel coordinate */
typedef long TPos;
/* determine the type used to store cell areas. This normally takes at */
/* least PIXEL_BITS*2 + 1 bits. On 16-bit systems, we need to use */
/* `long' instead of `int', otherwise bad things happen */
#if PIXEL_BITS <= 7
typedef int TArea;
/* PIXEL_BITS >= 8 */
#else
/* approximately determine the size of integers using an ANSI-C header */
#if FT_UINT_MAX == 0xFFFFU
typedef long TArea;
#else
typedef int TArea;
#endif
/* PIXEL_BITS >= 8 */
#endif
/* maximum number of gray spans in a call to the span callback */
#define FT_MAX_GRAY_SPANS 32
typedef struct TCell_* PCell;
typedef struct TCell_
{
/* same with gray_TWorker.ex */
TPos x;
/* same with gray_TWorker.cover */
TCoord cover;
TArea area;
PCell next;
} TCell;
typedef struct gray_TWorker_
{
TCoord ex, ey;
TPos min_ex, max_ex;
TPos min_ey, max_ey;
TPos count_ex, count_ey;
TArea area;
TCoord cover;
int invalid;
PCell cells;
FT_PtrDist max_cells;
FT_PtrDist num_cells;
TCoord cx, cy;
TPos x, y;
TPos last_ey;
FT_Vector bez_stack[32 * 3 + 1];
int lev_stack[32];
FT_Outline outline;
FT_Bitmap target;
FT_BBox clip_box;
FT_Span gray_spans[FT_MAX_GRAY_SPANS];
int num_gray_spans;
FT_Raster_Span_Func render_span;
void* render_span_data;
int span_y;
int band_size;
int band_shoot;
ft_jmp_buf jump_buffer;
void* buffer;
long buffer_size;
PCell* ycells;
TPos ycount;
} gray_TWorker, *gray_PWorker;
#ifndef FT_STATIC_RASTER
#define ras (*worker)
#else
static gray_TWorker ras;
#endif
typedef struct gray_TRaster_
{
void* buffer;
long buffer_size;
int band_size;
void* memory;
gray_PWorker worker;
} gray_TRaster, *gray_PRaster;
/*************************************************************************/
/* */
/* Initialize the cells table. */
/* */
static void
gray_init_cells( RAS_ARG_ void* buffer,
long byte_size )
{
ras.buffer = buffer;
ras.buffer_size = byte_size;
ras.ycells = (PCell*) buffer;
ras.cells = NULL;
ras.max_cells = 0;
ras.num_cells = 0;
ras.area = 0;
ras.cover = 0;
ras.invalid = 1;
}
/*************************************************************************/
/* */
/* Compute the outline bounding box. */
/* */
static void
gray_compute_cbox( RAS_ARG )
{
FT_Outline* outline = &ras.outline;
FT_Vector* vec = outline->points;
FT_Vector* limit = vec + outline->n_points;
if ( outline->n_points <= 0 )
{
ras.min_ex = ras.max_ex = 0;
ras.min_ey = ras.max_ey = 0;
return;
}
ras.min_ex = ras.max_ex = vec->x;
ras.min_ey = ras.max_ey = vec->y;
vec++;
for ( ; vec < limit; vec++ )
{
TPos x = vec->x;
TPos y = vec->y;
if ( x < ras.min_ex ) ras.min_ex = x;
if ( x > ras.max_ex ) ras.max_ex = x;
if ( y < ras.min_ey ) ras.min_ey = y;
if ( y > ras.max_ey ) ras.max_ey = y;
}
/* truncate the bounding box to integer pixels */
ras.min_ex = ras.min_ex >> 6;
ras.min_ey = ras.min_ey >> 6;
ras.max_ex = ( ras.max_ex + 63 ) >> 6;
ras.max_ey = ( ras.max_ey + 63 ) >> 6;
}
/*************************************************************************/
/* */
/* Record the current cell in the table. */
/* */
static PCell
gray_find_cell( RAS_ARG )
{
PCell *pcell, cell;
TPos x = ras.ex;
if ( x > ras.count_ex )
x = ras.count_ex;
pcell = &ras.ycells[ras.ey];
for (;;)
{
cell = *pcell;
if ( cell == NULL || cell->x > x )
break;
if ( cell->x == x )
goto Exit;
pcell = &cell->next;
}
if ( ras.num_cells >= ras.max_cells )
ft_longjmp( ras.jump_buffer, 1 );
cell = ras.cells + ras.num_cells++;
cell->x = x;
cell->area = 0;
cell->cover = 0;
cell->next = *pcell;
*pcell = cell;
Exit:
return cell;
}
static void
gray_record_cell( RAS_ARG )
{
if ( !ras.invalid && ( ras.area | ras.cover ) )
{
PCell cell = gray_find_cell( RAS_VAR );
cell->area += ras.area;
cell->cover += ras.cover;
}
}
/*************************************************************************/
/* */
/* Set the current cell to a new position. */
/* */
static void
gray_set_cell( RAS_ARG_ TCoord ex,
TCoord ey )
{
/* Move the cell pointer to a new position. We set the `invalid' */
/* flag to indicate that the cell isn't part of those we're interested */
/* in during the render phase. This means that: */
/* */
/* . the new vertical position must be within min_ey..max_ey-1. */
/* . the new horizontal position must be strictly less than max_ex */
/* */
/* Note that if a cell is to the left of the clipping region, it is */
/* actually set to the (min_ex-1) horizontal position. */
/* All cells that are on the left of the clipping region go to the */
/* min_ex - 1 horizontal position. */
ey -= ras.min_ey;
if ( ex > ras.max_ex )
ex = ras.max_ex;
ex -= ras.min_ex;
if ( ex < 0 )
ex = -1;
/* are we moving to a different cell ? */
if ( ex != ras.ex || ey != ras.ey )
{
/* record the current one if it is valid */
if ( !ras.invalid )
gray_record_cell( RAS_VAR );
ras.area = 0;
ras.cover = 0;
}
ras.ex = ex;
ras.ey = ey;
ras.invalid = ( (unsigned)ey >= (unsigned)ras.count_ey ||
ex >= ras.count_ex );
}
/*************************************************************************/
/* */
/* Start a new contour at a given cell. */
/* */
static void
gray_start_cell( RAS_ARG_ TCoord ex,
TCoord ey )
{
if ( ex > ras.max_ex )
ex = (TCoord)( ras.max_ex );
if ( ex < ras.min_ex )
ex = (TCoord)( ras.min_ex - 1 );
ras.area = 0;
ras.cover = 0;
ras.ex = ex - ras.min_ex;
ras.ey = ey - ras.min_ey;
ras.last_ey = SUBPIXELS( ey );
ras.invalid = 0;
gray_set_cell( RAS_VAR_ ex, ey );
}
/*************************************************************************/
/* */
/* Render a scanline as one or more cells. */
/* */
static void
gray_render_scanline( RAS_ARG_ TCoord ey,
TPos x1,
TCoord y1,
TPos x2,
TCoord y2 )
{
TCoord ex1, ex2, fx1, fx2, delta, mod, lift, rem;
long p, first, dx;
int incr;
dx = x2 - x1;
ex1 = TRUNC( x1 );
ex2 = TRUNC( x2 );
fx1 = (TCoord)( x1 - SUBPIXELS( ex1 ) );
fx2 = (TCoord)( x2 - SUBPIXELS( ex2 ) );
/* trivial case. Happens often */
if ( y1 == y2 )
{
gray_set_cell( RAS_VAR_ ex2, ey );
return;
}
/* everything is located in a single cell. That is easy! */
/* */
if ( ex1 == ex2 )
{
delta = y2 - y1;
ras.area += (TArea)(( fx1 + fx2 ) * delta);
ras.cover += delta;
return;
}
/* ok, we'll have to render a run of adjacent cells on the same */
/* scanline... */
/* */
p = ( ONE_PIXEL - fx1 ) * ( y2 - y1 );
first = ONE_PIXEL;
incr = 1;
if ( dx < 0 )
{
p = fx1 * ( y2 - y1 );
first = 0;
incr = -1;
dx = -dx;
}
delta = (TCoord)( p / dx );
mod = (TCoord)( p % dx );
if ( mod < 0 )
{
delta--;
mod += (TCoord)dx;
}
ras.area += (TArea)(( fx1 + first ) * delta);
ras.cover += delta;
ex1 += incr;
gray_set_cell( RAS_VAR_ ex1, ey );
y1 += delta;
if ( ex1 != ex2 )
{
p = ONE_PIXEL * ( y2 - y1 + delta );
lift = (TCoord)( p / dx );
rem = (TCoord)( p % dx );
if ( rem < 0 )
{
lift--;
rem += (TCoord)dx;
}
mod -= (int)dx;
while ( ex1 != ex2 )
{
delta = lift;
mod += rem;
if ( mod >= 0 )
{
mod -= (TCoord)dx;
delta++;
}
ras.area += (TArea)(ONE_PIXEL * delta);
ras.cover += delta;
y1 += delta;
ex1 += incr;
gray_set_cell( RAS_VAR_ ex1, ey );
}
}
delta = y2 - y1;
ras.area += (TArea)(( fx2 + ONE_PIXEL - first ) * delta);
ras.cover += delta;
}
/*************************************************************************/
/* */
/* Render a given line as a series of scanlines. */
/* */
static void
gray_render_line( RAS_ARG_ TPos to_x,
TPos to_y )
{
TCoord ey1, ey2, fy1, fy2, mod;
TPos dx, dy, x, x2;
long p, first;
int delta, rem, lift, incr;
ey1 = TRUNC( ras.last_ey );
/* if (ey2 >= ras.max_ey) ey2 = ras.max_ey-1; */
ey2 = TRUNC( to_y );
fy1 = (TCoord)( ras.y - ras.last_ey );
fy2 = (TCoord)( to_y - SUBPIXELS( ey2 ) );
dx = to_x - ras.x;
dy = to_y - ras.y;
/* XXX: we should do something about the trivial case where dx == 0, */
/* as it happens very often! */
/* perform vertical clipping */
{
TCoord min, max;
min = ey1;
max = ey2;
if ( ey1 > ey2 )
{
min = ey2;
max = ey1;
}
if ( min >= ras.max_ey || max < ras.min_ey )
goto End;
}
/* everything is on a single scanline */
if ( ey1 == ey2 )
{
gray_render_scanline( RAS_VAR_ ey1, ras.x, fy1, to_x, fy2 );
goto End;
}
/* vertical line - avoid calling gray_render_scanline */
incr = 1;
if ( dx == 0 )
{
TCoord ex = TRUNC( ras.x );
TCoord two_fx = (TCoord)( ( ras.x - SUBPIXELS( ex ) ) << 1 );
TArea area;
first = ONE_PIXEL;
if ( dy < 0 )
{
first = 0;
incr = -1;
}
delta = (int)( first - fy1 );
ras.area += (TArea)two_fx * delta;
ras.cover += delta;
ey1 += incr;
gray_set_cell( RAS_VAR_ ex, ey1 );
delta = (int)( first + first - ONE_PIXEL );
area = (TArea)two_fx * delta;
while ( ey1 != ey2 )
{
ras.area += area;
ras.cover += delta;
ey1 += incr;
gray_set_cell( RAS_VAR_ ex, ey1 );
}
delta = (int)( fy2 - ONE_PIXEL + first );
ras.area += (TArea)two_fx * delta;
ras.cover += delta;
goto End;
}
/* ok, we have to render several scanlines */
p = ( ONE_PIXEL - fy1 ) * dx;
first = ONE_PIXEL;
incr = 1;
if ( dy < 0 )
{
p = fy1 * dx;
first = 0;
incr = -1;
dy = -dy;
}
delta = (int)( p / dy );
mod = (int)( p % dy );
if ( mod < 0 )
{
delta--;
mod += (TCoord)dy;
}
x = ras.x + delta;
gray_render_scanline( RAS_VAR_ ey1, ras.x, fy1, x, (TCoord)first );
ey1 += incr;
gray_set_cell( RAS_VAR_ TRUNC( x ), ey1 );
if ( ey1 != ey2 )
{
p = ONE_PIXEL * dx;
lift = (int)( p / dy );
rem = (int)( p % dy );
if ( rem < 0 )
{
lift--;
rem += (int)dy;
}
mod -= (int)dy;
while ( ey1 != ey2 )
{
delta = lift;
mod += rem;
if ( mod >= 0 )
{
mod -= (int)dy;
delta++;
}
x2 = x + delta;
gray_render_scanline( RAS_VAR_ ey1, x,
(TCoord)( ONE_PIXEL - first ), x2,
(TCoord)first );
x = x2;
ey1 += incr;
gray_set_cell( RAS_VAR_ TRUNC( x ), ey1 );
}
}
gray_render_scanline( RAS_VAR_ ey1, x,
(TCoord)( ONE_PIXEL - first ), to_x,
fy2 );
End:
ras.x = to_x;
ras.y = to_y;
ras.last_ey = SUBPIXELS( ey2 );
}
static void
gray_split_conic( FT_Vector* base )
{
TPos a, b;
base[4].x = base[2].x;
b = base[1].x;
a = base[3].x = ( base[2].x + b ) / 2;
b = base[1].x = ( base[0].x + b ) / 2;
base[2].x = ( a + b ) / 2;
base[4].y = base[2].y;
b = base[1].y;
a = base[3].y = ( base[2].y + b ) / 2;
b = base[1].y = ( base[0].y + b ) / 2;
base[2].y = ( a + b ) / 2;
}
static void
gray_render_conic( RAS_ARG_ const FT_Vector* control,
const FT_Vector* to )
{
TPos dx, dy;
TPos min, max, y;
int top, level;
int* levels;
FT_Vector* arc;
levels = ras.lev_stack;
arc = ras.bez_stack;
arc[0].x = UPSCALE( to->x );
arc[0].y = UPSCALE( to->y );
arc[1].x = UPSCALE( control->x );
arc[1].y = UPSCALE( control->y );
arc[2].x = ras.x;
arc[2].y = ras.y;
top = 0;
dx = FT_ABS( arc[2].x + arc[0].x - 2 * arc[1].x );
dy = FT_ABS( arc[2].y + arc[0].y - 2 * arc[1].y );
if ( dx < dy )
dx = dy;
if ( dx < ONE_PIXEL / 4 )
goto Draw;
/* short-cut the arc that crosses the current band */
min = max = arc[0].y;
y = arc[1].y;
if ( y < min ) min = y;
if ( y > max ) max = y;
y = arc[2].y;
if ( y < min ) min = y;
if ( y > max ) max = y;
if ( TRUNC( min ) >= ras.max_ey || TRUNC( max ) < ras.min_ey )
goto Draw;
level = 0;
do
{
dx >>= 2;
level++;
} while ( dx > ONE_PIXEL / 4 );
levels[0] = level;
do
{
level = levels[top];
if ( level > 0 )
{
gray_split_conic( arc );
arc += 2;
top++;
levels[top] = levels[top - 1] = level - 1;
continue;
}
Draw:
gray_render_line( RAS_VAR_ arc[0].x, arc[0].y );
top--;
arc -= 2;
} while ( top >= 0 );
}
static void
gray_split_cubic( FT_Vector* base )
{
TPos a, b, c, d;
base[6].x = base[3].x;
c = base[1].x;
d = base[2].x;
base[1].x = a = ( base[0].x + c ) / 2;
base[5].x = b = ( base[3].x + d ) / 2;
c = ( c + d ) / 2;
base[2].x = a = ( a + c ) / 2;
base[4].x = b = ( b + c ) / 2;
base[3].x = ( a + b ) / 2;
base[6].y = base[3].y;
c = base[1].y;
d = base[2].y;
base[1].y = a = ( base[0].y + c ) / 2;
base[5].y = b = ( base[3].y + d ) / 2;
c = ( c + d ) / 2;
base[2].y = a = ( a + c ) / 2;
base[4].y = b = ( b + c ) / 2;
base[3].y = ( a + b ) / 2;
}
static void
gray_render_cubic( RAS_ARG_ const FT_Vector* control1,
const FT_Vector* control2,
const FT_Vector* to )
{
FT_Vector* arc;
TPos min, max, y;
arc = ras.bez_stack;
arc[0].x = UPSCALE( to->x );
arc[0].y = UPSCALE( to->y );
arc[1].x = UPSCALE( control2->x );
arc[1].y = UPSCALE( control2->y );
arc[2].x = UPSCALE( control1->x );
arc[2].y = UPSCALE( control1->y );
arc[3].x = ras.x;
arc[3].y = ras.y;
/* Short-cut the arc that crosses the current band. */
min = max = arc[0].y;
y = arc[1].y;
if ( y < min )
min = y;
if ( y > max )
max = y;
y = arc[2].y;
if ( y < min )
min = y;
if ( y > max )
max = y;
y = arc[3].y;
if ( y < min )
min = y;
if ( y > max )
max = y;
if ( TRUNC( min ) >= ras.max_ey || TRUNC( max ) < ras.min_ey )
goto Draw;
for (;;)
{
/* Decide whether to split or draw. See `Rapid Termination */
/* Evaluation for Recursive Subdivision of Bezier Curves' by Thomas */
/* F. Hain, at */
/* http://www.cis.southalabama.edu/~hain/general/Publications/Bezier/Camera-ready%20CISST02%202.pdf */
{
TPos dx, dy, dx_, dy_;
TPos dx1, dy1, dx2, dy2;
TPos L, s, s_limit;
/* dx and dy are x and y components of the P0-P3 chord vector. */
dx = arc[3].x - arc[0].x;
dy = arc[3].y - arc[0].y;
/* L is an (under)estimate of the Euclidean distance P0-P3. */
/* */
/* If dx >= dy, then r = sqrt(dx^2 + dy^2) can be overestimated */
/* with least maximum error by */
/* */
/* r_upperbound = dx + (sqrt(2) - 1) * dy , */
/* */
/* where sqrt(2) - 1 can be (over)estimated by 107/256, giving an */
/* error of no more than 8.4%. */
/* */
/* Similarly, some elementary calculus shows that r can be */
/* underestimated with least maximum error by */
/* */
/* r_lowerbound = sqrt(2 + sqrt(2)) / 2 * dx */
/* + sqrt(2 - sqrt(2)) / 2 * dy . */
/* */
/* 236/256 and 97/256 are (under)estimates of the two algebraic */
/* numbers, giving an error of no more than 8.1%. */
dx_ = FT_ABS( dx );
dy_ = FT_ABS( dy );
/* This is the same as */
/* */
/* L = ( 236 * FT_MAX( dx_, dy_ ) */
/* + 97 * FT_MIN( dx_, dy_ ) ) >> 8; */
L = ( dx_ > dy_ ? 236 * dx_ + 97 * dy_
: 97 * dx_ + 236 * dy_ ) >> 8;
/* Avoid possible arithmetic overflow below by splitting. */
if ( L > 32767 )
goto Split;
/* Max deviation may be as much as (s/L) * 3/4 (if Hain's v = 1). */
s_limit = L * (TPos)( ONE_PIXEL / 6 );
/* s is L * the perpendicular distance from P1 to the line P0-P3. */
dx1 = arc[1].x - arc[0].x;
dy1 = arc[1].y - arc[0].y;
s = FT_ABS( dy * dx1 - dx * dy1 );
if ( s > s_limit )
goto Split;
/* s is L * the perpendicular distance from P2 to the line P0-P3. */
dx2 = arc[2].x - arc[0].x;
dy2 = arc[2].y - arc[0].y;
s = FT_ABS( dy * dx2 - dx * dy2 );
if ( s > s_limit )
goto Split;
/* Split super curvy segments where the off points are so far
from the chord that the angles P0-P1-P3 or P0-P2-P3 become
acute as detected by appropriate dot products. */
if ( dx1 * ( dx1 - dx ) + dy1 * ( dy1 - dy ) > 0 ||
dx2 * ( dx2 - dx ) + dy2 * ( dy2 - dy ) > 0 )
goto Split;
/* No reason to split. */
goto Draw;
}
Split:
gray_split_cubic( arc );
arc += 3;
continue;
Draw:
gray_render_line( RAS_VAR_ arc[0].x, arc[0].y );
if ( arc == ras.bez_stack )
return;
arc -= 3;
}
}
static int
gray_move_to( const FT_Vector* to,
gray_PWorker worker )
{
TPos x, y;
/* record current cell, if any */
gray_record_cell( RAS_VAR );
/* start to a new position */
x = UPSCALE( to->x );
y = UPSCALE( to->y );
gray_start_cell( RAS_VAR_ TRUNC( x ), TRUNC( y ) );
worker->x = x;
worker->y = y;
return 0;
}
static int
gray_line_to( const FT_Vector* to,
gray_PWorker worker )
{
gray_render_line( RAS_VAR_ UPSCALE( to->x ), UPSCALE( to->y ) );
return 0;
}
static int
gray_conic_to( const FT_Vector* control,
const FT_Vector* to,
gray_PWorker worker )
{
gray_render_conic( RAS_VAR_ control, to );
return 0;
}
static int
gray_cubic_to( const FT_Vector* control1,
const FT_Vector* control2,
const FT_Vector* to,
gray_PWorker worker )
{
gray_render_cubic( RAS_VAR_ control1, control2, to );
return 0;
}
static void
gray_render_span( int y,
int count,
const FT_Span* spans,
gray_PWorker worker )
{
unsigned char* p;
FT_Bitmap* map = &worker->target;
/* first of all, compute the scanline offset */
p = (unsigned char*)map->buffer - y * map->pitch;
if ( map->pitch >= 0 )
p += (unsigned)( ( map->rows - 1 ) * map->pitch );
for ( ; count > 0; count--, spans++ )
{
unsigned char coverage = spans->coverage;
if ( coverage )
{
/* For small-spans it is faster to do it by ourselves than
* calling `memset'. This is mainly due to the cost of the
* function call.
*/
if ( spans->len >= 8 )
FT_MEM_SET( p + spans->x, (unsigned char)coverage, spans->len );
else
{
unsigned char* q = p + spans->x;
switch ( spans->len )
{
case 7: *q++ = (unsigned char)coverage;
case 6: *q++ = (unsigned char)coverage;
case 5: *q++ = (unsigned char)coverage;
case 4: *q++ = (unsigned char)coverage;
case 3: *q++ = (unsigned char)coverage;
case 2: *q++ = (unsigned char)coverage;
case 1: *q = (unsigned char)coverage;
default:
;
}
}
}
}
}
static void
gray_hline( RAS_ARG_ TCoord x,
TCoord y,
TPos area,
TCoord acount )
{
FT_Span* span;
int count;
int coverage;
/* compute the coverage line's coverage, depending on the */
/* outline fill rule */
/* */
/* the coverage percentage is area/(PIXEL_BITS*PIXEL_BITS*2) */
/* */
coverage = (int)( area >> ( PIXEL_BITS * 2 + 1 - 8 ) );
/* use range 0..256 */
if ( coverage < 0 )
coverage = -coverage;
if ( ras.outline.flags & FT_OUTLINE_EVEN_ODD_FILL )
{
coverage &= 511;
if ( coverage > 256 )
coverage = 512 - coverage;
else if ( coverage == 256 )
coverage = 255;
}
else
{
/* normal non-zero winding rule */
if ( coverage >= 256 )
coverage = 255;
}
y += (TCoord)ras.min_ey;
x += (TCoord)ras.min_ex;
/* FT_Span.x is a 16-bit short, so limit our coordinates appropriately */
if ( x >= 32767 )
x = 32767;
/* FT_Span.y is an integer, so limit our coordinates appropriately */
if ( y >= FT_INT_MAX )
y = FT_INT_MAX;
if ( coverage )
{
/* see whether we can add this span to the current list */
count = ras.num_gray_spans;
span = ras.gray_spans + count - 1;
if ( count > 0 &&
ras.span_y == y &&
(int)span->x + span->len == (int)x &&
span->coverage == coverage )
{
span->len = (unsigned short)( span->len + acount );
return;
}
if ( ras.span_y != y || count >= FT_MAX_GRAY_SPANS )
{
if ( ras.render_span && count > 0 )
ras.render_span( ras.span_y, count, ras.gray_spans,
ras.render_span_data );
ras.num_gray_spans = 0;
ras.span_y = (int)y;
count = 0;
span = ras.gray_spans;
}
else
span++;
/* add a gray span to the current list */
span->x = (short)x;
span->len = (unsigned short)acount;
span->coverage = (unsigned char)coverage;
ras.num_gray_spans++;
}
}
static void
gray_sweep( RAS_ARG_ const FT_Bitmap* target )
{
int yindex;
FT_UNUSED( target );
if ( ras.num_cells == 0 )
return;
ras.num_gray_spans = 0;
FT_TRACE7(( "gray_sweep: start\n" ));
for ( yindex = 0; yindex < ras.ycount; yindex++ )
{
PCell cell = ras.ycells[yindex];
TCoord cover = 0;
TCoord x = 0;
for ( ; cell != NULL; cell = cell->next )
{
TPos area;
if ( cell->x > x && cover != 0 )
gray_hline( RAS_VAR_ x, yindex, cover * ( ONE_PIXEL * 2 ),
cell->x - x );
cover += cell->cover;
area = cover * ( ONE_PIXEL * 2 ) - cell->area;
if ( area != 0 && cell->x >= 0 )
gray_hline( RAS_VAR_ cell->x, yindex, area, 1 );
x = cell->x + 1;
}
if ( cover != 0 )
gray_hline( RAS_VAR_ x, yindex, cover * ( ONE_PIXEL * 2 ),
ras.count_ex - x );
}
if ( ras.render_span && ras.num_gray_spans > 0 )
ras.render_span( ras.span_y, ras.num_gray_spans,
ras.gray_spans, ras.render_span_data );
}
#ifdef _STANDALONE_
/*************************************************************************/
/* */
/* The following function should only compile in stand-alone mode, */
/* i.e., when building this component without the rest of FreeType. */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* FT_Outline_Decompose */
/* */
/* <Description> */
/* Walk over an outline's structure to decompose it into individual */
/* segments and Bézier arcs. This function is also able to emit */
/* `move to' and `close to' operations to indicate the start and end */
/* of new contours in the outline. */
/* */
/* <Input> */
/* outline :: A pointer to the source target. */
/* */
/* func_interface :: A table of `emitters', i.e., function pointers */
/* called during decomposition to indicate path */
/* operations. */
/* */
/* <InOut> */
/* user :: A typeless pointer which is passed to each */
/* emitter during the decomposition. It can be */
/* used to store the state during the */
/* decomposition. */
/* */
/* <Return> */
/* Error code. 0 means success. */
/* */
static int
FT_Outline_Decompose( const FT_Outline* outline,
const FT_Outline_Funcs* func_interface,
void* user )
{
#undef SCALED
#define SCALED( x ) ( ( (x) << shift ) - delta )
FT_Vector v_last;
FT_Vector v_control;
FT_Vector v_start;
FT_Vector* point;
FT_Vector* limit;
char* tags;
int error;
/* index of contour in outline */
int n;
/* index of first point in contour */
int first;
/* current point's state */
char tag;
int shift;
TPos delta;
if ( !outline || !func_interface )
return ErrRaster_Invalid_Argument;
shift = func_interface->shift;
delta = func_interface->delta;
first = 0;
for ( n = 0; n < outline->n_contours; n++ )
{
/* index of last point in contour */
int last;
FT_TRACE5(( "FT_Outline_Decompose: Outline %d\n", n ));
last = outline->contours[n];
if ( last < 0 )
goto Invalid_Outline;
limit = outline->points + last;
v_start = outline->points[first];
v_start.x = SCALED( v_start.x );
v_start.y = SCALED( v_start.y );
v_last = outline->points[last];
v_last.x = SCALED( v_last.x );
v_last.y = SCALED( v_last.y );
v_control = v_start;
point = outline->points + first;
tags = outline->tags + first;
tag = FT_CURVE_TAG( tags[0] );
/* A contour cannot start with a cubic control point! */
if ( tag == FT_CURVE_TAG_CUBIC )
goto Invalid_Outline;
/* check first point to determine origin */
if ( tag == FT_CURVE_TAG_CONIC )
{
/* first point is conic control. Yes, this happens. */
if ( FT_CURVE_TAG( outline->tags[last] ) == FT_CURVE_TAG_ON )
{
/* start at last point if it is on the curve */
v_start = v_last;
limit--;
}
else
{
/* if both first and last points are conic, */
/* start at their middle and record its position */
/* for closure */
v_start.x = ( v_start.x + v_last.x ) / 2;
v_start.y = ( v_start.y + v_last.y ) / 2;
v_last = v_start;
}
point--;
tags--;
}
FT_TRACE5(( " move to (%.2f, %.2f)\n",
v_start.x / 64.0, v_start.y / 64.0 ));
error = func_interface->move_to( &v_start, user );
if ( error )
goto Exit;
while ( point < limit )
{
point++;
tags++;
tag = FT_CURVE_TAG( tags[0] );
switch ( tag )
{
/* emit a single line_to */
case FT_CURVE_TAG_ON:
{
FT_Vector vec;
vec.x = SCALED( point->x );
vec.y = SCALED( point->y );
FT_TRACE5(( " line to (%.2f, %.2f)\n",
vec.x / 64.0, vec.y / 64.0 ));
error = func_interface->line_to( &vec, user );
if ( error )
goto Exit;
continue;
}
/* consume conic arcs */
case FT_CURVE_TAG_CONIC:
v_control.x = SCALED( point->x );
v_control.y = SCALED( point->y );
Do_Conic:
if ( point < limit )
{
FT_Vector vec;
FT_Vector v_middle;
point++;
tags++;
tag = FT_CURVE_TAG( tags[0] );
vec.x = SCALED( point->x );
vec.y = SCALED( point->y );
if ( tag == FT_CURVE_TAG_ON )
{
FT_TRACE5(( " conic to (%.2f, %.2f)"
" with control (%.2f, %.2f)\n",
vec.x / 64.0, vec.y / 64.0,
v_control.x / 64.0, v_control.y / 64.0 ));
error = func_interface->conic_to( &v_control, &vec, user );
if ( error )
goto Exit;
continue;
}
if ( tag != FT_CURVE_TAG_CONIC )
goto Invalid_Outline;
v_middle.x = ( v_control.x + vec.x ) / 2;
v_middle.y = ( v_control.y + vec.y ) / 2;
FT_TRACE5(( " conic to (%.2f, %.2f)"
" with control (%.2f, %.2f)\n",
v_middle.x / 64.0, v_middle.y / 64.0,
v_control.x / 64.0, v_control.y / 64.0 ));
error = func_interface->conic_to( &v_control, &v_middle, user );
if ( error )
goto Exit;
v_control = vec;
goto Do_Conic;
}
FT_TRACE5(( " conic to (%.2f, %.2f)"
" with control (%.2f, %.2f)\n",
v_start.x / 64.0, v_start.y / 64.0,
v_control.x / 64.0, v_control.y / 64.0 ));
error = func_interface->conic_to( &v_control, &v_start, user );
goto Close;
/* FT_CURVE_TAG_CUBIC */
default:
{
FT_Vector vec1, vec2;
if ( point + 1 > limit ||
FT_CURVE_TAG( tags[1] ) != FT_CURVE_TAG_CUBIC )
goto Invalid_Outline;
point += 2;
tags += 2;
vec1.x = SCALED( point[-2].x );
vec1.y = SCALED( point[-2].y );
vec2.x = SCALED( point[-1].x );
vec2.y = SCALED( point[-1].y );
if ( point <= limit )
{
FT_Vector vec;
vec.x = SCALED( point->x );
vec.y = SCALED( point->y );
FT_TRACE5(( " cubic to (%.2f, %.2f)"
" with controls (%.2f, %.2f) and (%.2f, %.2f)\n",
vec.x / 64.0, vec.y / 64.0,
vec1.x / 64.0, vec1.y / 64.0,
vec2.x / 64.0, vec2.y / 64.0 ));
error = func_interface->cubic_to( &vec1, &vec2, &vec, user );
if ( error )
goto Exit;
continue;
}
FT_TRACE5(( " cubic to (%.2f, %.2f)"
" with controls (%.2f, %.2f) and (%.2f, %.2f)\n",
v_start.x / 64.0, v_start.y / 64.0,
vec1.x / 64.0, vec1.y / 64.0,
vec2.x / 64.0, vec2.y / 64.0 ));
error = func_interface->cubic_to( &vec1, &vec2, &v_start, user );
goto Close;
}
}
}
/* close the contour with a line segment */
FT_TRACE5(( " line to (%.2f, %.2f)\n",
v_start.x / 64.0, v_start.y / 64.0 ));
error = func_interface->line_to( &v_start, user );
Close:
if ( error )
goto Exit;
first = last + 1;
}
FT_TRACE5(( "FT_Outline_Decompose: Done\n", n ));
return 0;
Exit:
FT_TRACE5(( "FT_Outline_Decompose: Error %d\n", error ));
return error;
Invalid_Outline:
return ErrRaster_Invalid_Outline;
}
/* _STANDALONE_ */
#endif
typedef struct gray_TBand_
{
TPos min, max;
} gray_TBand;
FT_DEFINE_OUTLINE_FUNCS(func_interface,
(FT_Outline_MoveTo_Func) gray_move_to,
(FT_Outline_LineTo_Func) gray_line_to,
(FT_Outline_ConicTo_Func)gray_conic_to,
(FT_Outline_CubicTo_Func)gray_cubic_to,
0,
0
)
static int
gray_convert_glyph_inner( RAS_ARG )
{
volatile int error = 0;
if ( ft_setjmp( ras.jump_buffer ) == 0 )
{
error = FT_Outline_Decompose( &ras.outline, &func_interface, &ras );
gray_record_cell( RAS_VAR );
}
else
error = ErrRaster_Memory_Overflow;
return error;
}
static int
gray_convert_glyph( RAS_ARG )
{
gray_TBand bands[40];
gray_TBand* volatile band;
int volatile n, num_bands;
TPos volatile min, max, max_y;
FT_BBox* clip;
/* Set up state in the raster object */
gray_compute_cbox( RAS_VAR );
/* clip to target bitmap, exit if nothing to do */
clip = &ras.clip_box;
if ( ras.max_ex <= clip->xMin || ras.min_ex >= clip->xMax ||
ras.max_ey <= clip->yMin || ras.min_ey >= clip->yMax )
return 0;
if ( ras.min_ex < clip->xMin ) ras.min_ex = clip->xMin;
if ( ras.min_ey < clip->yMin ) ras.min_ey = clip->yMin;
if ( ras.max_ex > clip->xMax ) ras.max_ex = clip->xMax;
if ( ras.max_ey > clip->yMax ) ras.max_ey = clip->yMax;
ras.count_ex = ras.max_ex - ras.min_ex;
ras.count_ey = ras.max_ey - ras.min_ey;
/* set up vertical bands */
num_bands = (int)( ( ras.max_ey - ras.min_ey ) / ras.band_size );
if ( num_bands == 0 )
num_bands = 1;
if ( num_bands >= 39 )
num_bands = 39;
ras.band_shoot = 0;
min = ras.min_ey;
max_y = ras.max_ey;
for ( n = 0; n < num_bands; n++, min = max )
{
max = min + ras.band_size;
if ( n == num_bands - 1 || max > max_y )
max = max_y;
bands[0].min = min;
bands[0].max = max;
band = bands;
while ( band >= bands )
{
TPos bottom, top, middle;
int error;
{
PCell cells_max;
int yindex;
long cell_start, cell_end, cell_mod;
ras.ycells = (PCell*)ras.buffer;
ras.ycount = band->max - band->min;
cell_start = sizeof ( PCell ) * ras.ycount;
cell_mod = cell_start % sizeof ( TCell );
if ( cell_mod > 0 )
cell_start += sizeof ( TCell ) - cell_mod;
cell_end = ras.buffer_size;
cell_end -= cell_end % sizeof ( TCell );
cells_max = (PCell)( (char*)ras.buffer + cell_end );
ras.cells = (PCell)( (char*)ras.buffer + cell_start );
if ( ras.cells >= cells_max )
goto ReduceBands;
ras.max_cells = cells_max - ras.cells;
if ( ras.max_cells < 2 )
goto ReduceBands;
for ( yindex = 0; yindex < ras.ycount; yindex++ )
ras.ycells[yindex] = NULL;
}
ras.num_cells = 0;
ras.invalid = 1;
ras.min_ey = band->min;
ras.max_ey = band->max;
ras.count_ey = band->max - band->min;
error = gray_convert_glyph_inner( RAS_VAR );
if ( !error )
{
gray_sweep( RAS_VAR_ &ras.target );
band--;
continue;
}
else if ( error != ErrRaster_Memory_Overflow )
return 1;
ReduceBands:
/* render pool overflow; we will reduce the render band by half */
bottom = band->min;
top = band->max;
middle = bottom + ( ( top - bottom ) >> 1 );
/* This is too complex for a single scanline; there must */
/* be some problems. */
if ( middle == bottom )
{
return 1;
}
if ( bottom-top >= ras.band_size )
ras.band_shoot++;
band[1].min = bottom;
band[1].max = middle;
band[0].min = middle;
band[0].max = top;
band++;
}
}
if ( ras.band_shoot > 8 && ras.band_size > 16 )
ras.band_size = ras.band_size / 2;
return 0;
}
static int
gray_raster_render( gray_PRaster raster,
const FT_Raster_Params* params )
{
const FT_Outline* outline = (const FT_Outline*)params->source;
const FT_Bitmap* target_map = params->target;
gray_PWorker worker;
if ( !raster || !raster->buffer || !raster->buffer_size )
return ErrRaster_Invalid_Argument;
if ( !outline )
return ErrRaster_Invalid_Outline;
/* return immediately if the outline is empty */
if ( outline->n_points == 0 || outline->n_contours <= 0 )
return 0;
if ( !outline->contours || !outline->points )
return ErrRaster_Invalid_Outline;
if ( outline->n_points !=
outline->contours[outline->n_contours - 1] + 1 )
return ErrRaster_Invalid_Outline;
worker = raster->worker;
/* if direct mode is not set, we must have a target bitmap */
if ( !( params->flags & FT_RASTER_FLAG_DIRECT ) )
{
if ( !target_map )
return ErrRaster_Invalid_Argument;
/* nothing to do */
if ( !target_map->width || !target_map->rows )
return 0;
if ( !target_map->buffer )
return ErrRaster_Invalid_Argument;
}
/* this version does not support monochrome rendering */
if ( !( params->flags & FT_RASTER_FLAG_AA ) )
return ErrRaster_Invalid_Mode;
/* compute clipping box */
if ( !( params->flags & FT_RASTER_FLAG_DIRECT ) )
{
/* compute clip box from target pixmap */
ras.clip_box.xMin = 0;
ras.clip_box.yMin = 0;
ras.clip_box.xMax = target_map->width;
ras.clip_box.yMax = target_map->rows;
}
else if ( params->flags & FT_RASTER_FLAG_CLIP )
ras.clip_box = params->clip_box;
else
{
ras.clip_box.xMin = -32768L;
ras.clip_box.yMin = -32768L;
ras.clip_box.xMax = 32767L;
ras.clip_box.yMax = 32767L;
}
gray_init_cells( RAS_VAR_ raster->buffer, raster->buffer_size );
ras.outline = *outline;
ras.num_cells = 0;
ras.invalid = 1;
ras.band_size = raster->band_size;
ras.num_gray_spans = 0;
if ( params->flags & FT_RASTER_FLAG_DIRECT )
{
ras.render_span = (FT_Raster_Span_Func)params->gray_spans;
ras.render_span_data = params->user;
}
else
{
ras.target = *target_map;
ras.render_span = (FT_Raster_Span_Func)gray_render_span;
ras.render_span_data = &ras;
}
return gray_convert_glyph( RAS_VAR );
}
/**** RASTER OBJECT CREATION: In stand-alone mode, we simply use *****/
/**** a static object. *****/
#ifdef _STANDALONE_
static int
gray_raster_new( void* memory,
FT_Raster* araster )
{
static gray_TRaster the_raster;
FT_UNUSED( memory );
*araster = (FT_Raster)&the_raster;
FT_MEM_ZERO( &the_raster, sizeof ( the_raster ) );
return 0;
}
static void
gray_raster_done( FT_Raster raster )
{
/* nothing */
FT_UNUSED( raster );
}
/* !_STANDALONE_ */
#else
static int
gray_raster_new( FT_Memory memory,
FT_Raster* araster )
{
FT_Error error;
gray_PRaster raster = NULL;
*araster = 0;
if ( !FT_ALLOC( raster, sizeof ( gray_TRaster ) ) )
{
raster->memory = memory;
*araster = (FT_Raster)raster;
}
return error;
}
static void
gray_raster_done( FT_Raster raster )
{
FT_Memory memory = (FT_Memory)((gray_PRaster)raster)->memory;
FT_FREE( raster );
}
/* !_STANDALONE_ */
#endif
static void
gray_raster_reset( FT_Raster raster,
char* pool_base,
long pool_size )
{
gray_PRaster rast = (gray_PRaster)raster;
if ( raster )
{
if ( pool_base && pool_size >= (long)sizeof ( gray_TWorker ) + 2048 )
{
gray_PWorker worker = (gray_PWorker)pool_base;
rast->worker = worker;
rast->buffer = pool_base +
( ( sizeof ( gray_TWorker ) +
sizeof ( TCell ) - 1 ) &
~( sizeof ( TCell ) - 1 ) );
rast->buffer_size = (long)( ( pool_base + pool_size ) -
(char*)rast->buffer ) &
~( sizeof ( TCell ) - 1 );
rast->band_size = (int)( rast->buffer_size /
( sizeof ( TCell ) * 8 ) );
}
else
{
rast->buffer = NULL;
rast->buffer_size = 0;
rast->worker = NULL;
}
}
}
FT_DEFINE_RASTER_FUNCS(ft_grays_raster,
FT_GLYPH_FORMAT_OUTLINE,
(FT_Raster_New_Func) gray_raster_new,
(FT_Raster_Reset_Func) gray_raster_reset,
(FT_Raster_Set_Mode_Func)0,
(FT_Raster_Render_Func) gray_raster_render,
(FT_Raster_Done_Func) gray_raster_done
)
/* END */
/* Local Variables: */
/* coding: utf-8 */
/* End: */
/***************************************************************************/
/* */
/* ftsmooth.c */
/* */
/* Anti-aliasing renderer interface (body). */
/* */
/* Copyright 2000-2006, 2009-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftsmooth.h */
/* */
/* Anti-aliasing renderer interface (specification). */
/* */
/* Copyright 1996-2001 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTSMOOTH_H__
FT_BEGIN_HEADER
#ifndef FT_CONFIG_OPTION_NO_STD_RASTER
FT_DECLARE_RENDERER( ft_std_renderer_class )
#endif
#ifndef FT_CONFIG_OPTION_NO_SMOOTH_RASTER
FT_DECLARE_RENDERER( ft_smooth_renderer_class )
FT_DECLARE_RENDERER( ft_smooth_lcd_renderer_class )
FT_DECLARE_RENDERER( ft_smooth_lcd_v_renderer_class )
#endif
FT_END_HEADER
/* END */
/* initialize renderer -- init its raster */
static FT_Error
ft_smooth_init( FT_Renderer render )
{
FT_Library library = FT_MODULE_LIBRARY( render );
render->clazz->raster_class->raster_reset( render->raster,
library->raster_pool,
library->raster_pool_size );
return 0;
}
/* sets render-specific mode */
static FT_Error
ft_smooth_set_mode( FT_Renderer render,
FT_ULong mode_tag,
FT_Pointer data )
{
/* we simply pass it to the raster */
return render->clazz->raster_class->raster_set_mode( render->raster,
mode_tag,
data );
}
/* transform a given glyph image */
static FT_Error
ft_smooth_transform( FT_Renderer render,
FT_GlyphSlot slot,
const FT_Matrix* matrix,
const FT_Vector* delta )
{
FT_Error error = Smooth_Err_Ok;
if ( slot->format != render->glyph_format )
{
error = Smooth_Err_Invalid_Argument;
goto Exit;
}
if ( matrix )
FT_Outline_Transform( &slot->outline, matrix );
if ( delta )
FT_Outline_Translate( &slot->outline, delta->x, delta->y );
Exit:
return error;
}
/* return the glyph's control box */
static void
ft_smooth_get_cbox( FT_Renderer render,
FT_GlyphSlot slot,
FT_BBox* cbox )
{
FT_MEM_ZERO( cbox, sizeof ( *cbox ) );
if ( slot->format == render->glyph_format )
FT_Outline_Get_CBox( &slot->outline, cbox );
}
/* convert a slot's glyph image into a bitmap */
static FT_Error
ft_smooth_render_generic( FT_Renderer render,
FT_GlyphSlot slot,
FT_Render_Mode mode,
const FT_Vector* origin,
FT_Render_Mode required_mode )
{
FT_Error error;
FT_Outline* outline = NULL;
FT_BBox cbox;
FT_Pos width, height, pitch;
FT_Bitmap* bitmap = NULL;
FT_Memory memory = NULL;
FT_Int hmul = mode == FT_RENDER_MODE_LCD;
FT_Int vmul = mode == FT_RENDER_MODE_LCD_V;
FT_Pos x_shift, y_shift, x_left, y_top;
FT_Raster_Params params;
FT_Bool have_translated_origin = FALSE;
FT_Bool have_outline_shifted = FALSE;
FT_Bool have_buffer = FALSE;
/* check glyph image format */
if ( slot->format != render->glyph_format )
{
error = Smooth_Err_Invalid_Argument;
goto Exit;
}
/* check mode */
if ( mode != required_mode )
{
error = Smooth_Err_Cannot_Render_Glyph;
goto Exit;
}
outline = &slot->outline;
/* translate the outline to the new origin if needed */
if ( origin )
{
FT_Outline_Translate( outline, origin->x, origin->y );
have_translated_origin = TRUE;
}
/* compute the control box, and grid fit it */
FT_Outline_Get_CBox( outline, &cbox );
cbox.xMin = FT_PIX_FLOOR( cbox.xMin );
cbox.yMin = FT_PIX_FLOOR( cbox.yMin );
cbox.xMax = FT_PIX_CEIL( cbox.xMax );
cbox.yMax = FT_PIX_CEIL( cbox.yMax );
if ( cbox.xMin < 0 && cbox.xMax > FT_INT_MAX + cbox.xMin )
{
FT_ERROR(( "ft_smooth_render_generic: glyph too large:"
" xMin = %d, xMax = %d\n",
cbox.xMin >> 6, cbox.xMax >> 6 ));
error = Smooth_Err_Raster_Overflow;
goto Exit;
}
else
width = ( cbox.xMax - cbox.xMin ) >> 6;
if ( cbox.yMin < 0 && cbox.yMax > FT_INT_MAX + cbox.yMin )
{
FT_ERROR(( "ft_smooth_render_generic: glyph too large:"
" yMin = %d, yMax = %d\n",
cbox.yMin >> 6, cbox.yMax >> 6 ));
error = Smooth_Err_Raster_Overflow;
goto Exit;
}
else
height = ( cbox.yMax - cbox.yMin ) >> 6;
bitmap = &slot->bitmap;
memory = render->root.memory;
/* release old bitmap buffer */
if ( slot->internal->flags & FT_GLYPH_OWN_BITMAP )
{
FT_FREE( bitmap->buffer );
slot->internal->flags &= ~FT_GLYPH_OWN_BITMAP;
}
/* allocate new one */
pitch = width;
if ( hmul )
{
width = width * 3;
pitch = FT_PAD_CEIL( width, 4 );
}
if ( vmul )
height *= 3;
x_shift = (FT_Int) cbox.xMin;
y_shift = (FT_Int) cbox.yMin;
x_left = (FT_Int)( cbox.xMin >> 6 );
y_top = (FT_Int)( cbox.yMax >> 6 );
if ( slot->library->lcd_filter_func )
{
FT_Int extra = slot->library->lcd_extra;
if ( hmul )
{
x_shift -= 64 * ( extra >> 1 );
width += 3 * extra;
pitch = FT_PAD_CEIL( width, 4 );
x_left -= extra >> 1;
}
if ( vmul )
{
y_shift -= 64 * ( extra >> 1 );
height += 3 * extra;
y_top += extra >> 1;
}
}
#if FT_UINT_MAX > 0xFFFFU
/* Required check is (pitch * height < FT_ULONG_MAX), */
/* but we care realistic cases only. Always pitch <= width. */
if ( width > 0x7FFF || height > 0x7FFF )
{
FT_ERROR(( "ft_smooth_render_generic: glyph too large: %u x %u\n",
width, height ));
error = Smooth_Err_Raster_Overflow;
goto Exit;
}
#endif
bitmap->pixel_mode = FT_PIXEL_MODE_GRAY;
bitmap->num_grays = 256;
bitmap->width = width;
bitmap->rows = height;
bitmap->pitch = pitch;
/* translate outline to render it into the bitmap */
FT_Outline_Translate( outline, -x_shift, -y_shift );
have_outline_shifted = TRUE;
if ( FT_ALLOC( bitmap->buffer, (FT_ULong)pitch * height ) )
goto Exit;
else
have_buffer = TRUE;
slot->internal->flags |= FT_GLYPH_OWN_BITMAP;
/* set up parameters */
params.target = bitmap;
params.source = outline;
params.flags = FT_RASTER_FLAG_AA;
/* implode outline if needed */
{
FT_Vector* points = outline->points;
FT_Vector* points_end = points + outline->n_points;
FT_Vector* vec;
if ( hmul )
for ( vec = points; vec < points_end; vec++ )
vec->x *= 3;
if ( vmul )
for ( vec = points; vec < points_end; vec++ )
vec->y *= 3;
}
/* render outline into the bitmap */
error = render->raster_render( render->raster, &params );
/* deflate outline if needed */
{
FT_Vector* points = outline->points;
FT_Vector* points_end = points + outline->n_points;
FT_Vector* vec;
if ( hmul )
for ( vec = points; vec < points_end; vec++ )
vec->x /= 3;
if ( vmul )
for ( vec = points; vec < points_end; vec++ )
vec->y /= 3;
}
if ( error )
goto Exit;
if ( slot->library->lcd_filter_func )
slot->library->lcd_filter_func( bitmap, mode, slot->library );
/*
* XXX: on 16bit system, we return an error for huge bitmap
* to prevent an overflow.
*/
if ( x_left > FT_INT_MAX || y_top > FT_INT_MAX )
{
error = Smooth_Err_Invalid_Pixel_Size;
goto Exit;
}
slot->format = FT_GLYPH_FORMAT_BITMAP;
slot->bitmap_left = (FT_Int)x_left;
slot->bitmap_top = (FT_Int)y_top;
/* everything is fine; don't deallocate buffer */
have_buffer = FALSE;
error = Smooth_Err_Ok;
Exit:
if ( have_outline_shifted )
FT_Outline_Translate( outline, x_shift, y_shift );
if ( have_translated_origin )
FT_Outline_Translate( outline, -origin->x, -origin->y );
if ( have_buffer )
{
FT_FREE( bitmap->buffer );
slot->internal->flags &= ~FT_GLYPH_OWN_BITMAP;
}
return error;
}
/* convert a slot's glyph image into a bitmap */
static FT_Error
ft_smooth_render( FT_Renderer render,
FT_GlyphSlot slot,
FT_Render_Mode mode,
const FT_Vector* origin )
{
if ( mode == FT_RENDER_MODE_LIGHT )
mode = FT_RENDER_MODE_NORMAL;
return ft_smooth_render_generic( render, slot, mode, origin,
FT_RENDER_MODE_NORMAL );
}
/* convert a slot's glyph image into a horizontal LCD bitmap */
static FT_Error
ft_smooth_render_lcd( FT_Renderer render,
FT_GlyphSlot slot,
FT_Render_Mode mode,
const FT_Vector* origin )
{
FT_Error error;
error = ft_smooth_render_generic( render, slot, mode, origin,
FT_RENDER_MODE_LCD );
if ( !error )
slot->bitmap.pixel_mode = FT_PIXEL_MODE_LCD;
return error;
}
/* convert a slot's glyph image into a vertical LCD bitmap */
static FT_Error
ft_smooth_render_lcd_v( FT_Renderer render,
FT_GlyphSlot slot,
FT_Render_Mode mode,
const FT_Vector* origin )
{
FT_Error error;
error = ft_smooth_render_generic( render, slot, mode, origin,
FT_RENDER_MODE_LCD_V );
if ( !error )
slot->bitmap.pixel_mode = FT_PIXEL_MODE_LCD_V;
return error;
}
FT_DEFINE_RENDERER( ft_smooth_renderer_class,
FT_MODULE_RENDERER,
sizeof ( FT_RendererRec ),
"smooth",
0x10000L,
0x20000L,
/* module specific interface */
0,
(FT_Module_Constructor)ft_smooth_init,
(FT_Module_Destructor) 0,
(FT_Module_Requester) 0
,
FT_GLYPH_FORMAT_OUTLINE,
(FT_Renderer_RenderFunc) ft_smooth_render,
(FT_Renderer_TransformFunc)ft_smooth_transform,
(FT_Renderer_GetCBoxFunc) ft_smooth_get_cbox,
(FT_Renderer_SetModeFunc) ft_smooth_set_mode,
(FT_Raster_Funcs*) &FT_GRAYS_RASTER_GET
)
FT_DEFINE_RENDERER( ft_smooth_lcd_renderer_class,
FT_MODULE_RENDERER,
sizeof ( FT_RendererRec ),
"smooth-lcd",
0x10000L,
0x20000L,
/* module specific interface */
0,
(FT_Module_Constructor)ft_smooth_init,
(FT_Module_Destructor) 0,
(FT_Module_Requester) 0
,
FT_GLYPH_FORMAT_OUTLINE,
(FT_Renderer_RenderFunc) ft_smooth_render_lcd,
(FT_Renderer_TransformFunc)ft_smooth_transform,
(FT_Renderer_GetCBoxFunc) ft_smooth_get_cbox,
(FT_Renderer_SetModeFunc) ft_smooth_set_mode,
(FT_Raster_Funcs*) &FT_GRAYS_RASTER_GET
)
FT_DEFINE_RENDERER( ft_smooth_lcdv_renderer_class,
FT_MODULE_RENDERER,
sizeof ( FT_RendererRec ),
"smooth-lcdv",
0x10000L,
0x20000L,
/* module specific interface */
0,
(FT_Module_Constructor)ft_smooth_init,
(FT_Module_Destructor) 0,
(FT_Module_Requester) 0
,
FT_GLYPH_FORMAT_OUTLINE,
(FT_Renderer_RenderFunc) ft_smooth_render_lcd_v,
(FT_Renderer_TransformFunc)ft_smooth_transform,
(FT_Renderer_GetCBoxFunc) ft_smooth_get_cbox,
(FT_Renderer_SetModeFunc) ft_smooth_set_mode,
(FT_Raster_Funcs*) &FT_GRAYS_RASTER_GET
)
/* END */
/* END */
/***************************************************************************/
/* */
/* autofit.c */
/* */
/* Auto-fitter module (body). */
/* */
/* Copyright 2003-2007, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define FT_MAKE_OPTION_SINGLE_OBJECT
/***************************************************************************/
/* */
/* afpic.c */
/* */
/* The FreeType position independent code services for autofit module. */
/* */
/* Copyright 2009-2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* afpic.h */
/* */
/* The FreeType position independent code services for autofit module. */
/* */
/* Copyright 2009, 2011-2012 by */
/* Oran Agra and Mickey Gabel. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFPIC_H__
FT_BEGIN_HEADER
#define AF_SERVICES_GET af_services
#define AF_SERVICE_PROPERTIES_GET af_service_properties
#define AF_SCRIPT_CLASSES_GET af_script_classes
#define AF_INTERFACE_GET af_autofitter_interface
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* aferrors.h */
/* */
/* Autofitter error codes (specification only). */
/* */
/* Copyright 2005, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This file is used to define the Autofitter error enumeration */
/* constants. */
/* */
/*************************************************************************/
#define __AFERRORS_H__
#undef __FTERRORS_H__
#undef FT_ERR_PREFIX
#define FT_ERR_PREFIX AF_Err_
#define FT_ERR_BASE FT_Mod_Err_Autofit
/***************************************************************************/
/* */
/* fterrors.h */
/* */
/* FreeType error code handling (specification). */
/* */
/* Copyright 1996-2001, 2002, 2004, 2007 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* This special header file is used to define the handling of FT2 */
/* enumeration constants. It can also be used to generate error message */
/* strings with a small macro trick explained below. */
/* */
/* I - Error Formats */
/* ----------------- */
/* */
/* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
/* defined in ftoption.h in order to make the higher byte indicate */
/* the module where the error has happened (this is not compatible */
/* with standard builds of FreeType 2). You can then use the macro */
/* FT_ERROR_BASE macro to extract the generic error code from an */
/* FT_Error value. */
/* */
/* */
/* II - Error Message strings */
/* -------------------------- */
/* */
/* The error definitions below are made through special macros that */
/* allow client applications to build a table of error message strings */
/* if they need it. The strings are not included in a normal build of */
/* FreeType 2 to save space (most client applications do not use */
/* them). */
/* */
/* To do so, you have to define the following macros before including */
/* this file: */
/* */
/* FT_ERROR_START_LIST :: */
/* This macro is called before anything else to define the start of */
/* the error list. It is followed by several FT_ERROR_DEF calls */
/* (see below). */
/* */
/* FT_ERROR_DEF( e, v, s ) :: */
/* This macro is called to define one single error. */
/* `e' is the error code identifier (e.g. FT_Err_Invalid_Argument). */
/* `v' is the error numerical value. */
/* `s' is the corresponding error string. */
/* */
/* FT_ERROR_END_LIST :: */
/* This macro ends the list. */
/* */
/* Additionally, you have to undefine __FTERRORS_H__ before #including */
/* this file. */
/* */
/* Here is a simple example: */
/* */
/* { */
/* #undef __FTERRORS_H__ */
/* #define FT_ERRORDEF( e, v, s ) { e, s }, */
/* #define FT_ERROR_START_LIST { */
/* #define FT_ERROR_END_LIST { 0, 0 } }; */
/* */
/* const struct */
/* { */
/* int err_code; */
/* const char* err_msg; */
/* } ft_errors[] = */
/* */
/* #include FT_ERRORS_H */
/* } */
/* */
/*************************************************************************/
#ifndef __FTERRORS_H__
#define __FTERRORS_H__
/* include module base error codes */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#undef FT_ERR_XCAT
#undef FT_ERR_CAT
#define FT_ERR_XCAT( x, y ) x ## y
#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y )
/* FT_ERR_PREFIX is used as a prefix for error identifiers. */
/* By default, we use `FT_Err_'. */
/* */
#ifndef FT_ERR_PREFIX
#define FT_ERR_PREFIX FT_Err_
#endif
/* FT_ERR_BASE is used as the base for module-specific errors. */
/* */
#undef FT_ERR_BASE
#define FT_ERR_BASE 0
/* If FT_ERRORDEF is not defined, we need to define a simple */
/* enumeration type. */
/* */
#ifndef FT_ERRORDEF
#define FT_ERRORDEF( e, v, s ) e = v,
#define FT_ERROR_START_LIST enum {
#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
/* !FT_ERRORDEF */
#endif
/* this macro is used to define an error */
#define FT_ERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
/* this is only used for <module>_Err_Ok, which must be 0! */
#define FT_NOERRORDEF_( e, v, s ) \
FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
#ifdef FT_ERROR_START_LIST
FT_ERROR_START_LIST
#endif
/* now include the error codes */
/***************************************************************************/
/* */
/* fterrdef.h */
/* */
/* FreeType error codes (specification). */
/* */
/* Copyright 2002, 2004, 2006, 2007, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST OF ERROR CODES/MESSAGES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
/* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
/* including this file. */
/* generic errors */
FT_NOERRORDEF_( Ok, 0x00, \
"no error" )
FT_ERRORDEF_( Cannot_Open_Resource, 0x01, \
"cannot open resource" )
FT_ERRORDEF_( Unknown_File_Format, 0x02, \
"unknown file format" )
FT_ERRORDEF_( Invalid_File_Format, 0x03, \
"broken file" )
FT_ERRORDEF_( Invalid_Version, 0x04, \
"invalid FreeType version" )
FT_ERRORDEF_( Lower_Module_Version, 0x05, \
"module version is too low" )
FT_ERRORDEF_( Invalid_Argument, 0x06, \
"invalid argument" )
FT_ERRORDEF_( Unimplemented_Feature, 0x07, \
"unimplemented feature" )
FT_ERRORDEF_( Invalid_Table, 0x08, \
"broken table" )
FT_ERRORDEF_( Invalid_Offset, 0x09, \
"broken offset within table" )
FT_ERRORDEF_( Array_Too_Large, 0x0A, \
"array allocation size too large" )
FT_ERRORDEF_( Missing_Module, 0x0B, \
"missing module" )
FT_ERRORDEF_( Missing_Property, 0x0C, \
"missing property" )
/* glyph/character errors */
FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, \
"invalid glyph index" )
FT_ERRORDEF_( Invalid_Character_Code, 0x11, \
"invalid character code" )
FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, \
"unsupported glyph image format" )
FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, \
"cannot render this glyph format" )
FT_ERRORDEF_( Invalid_Outline, 0x14, \
"invalid outline" )
FT_ERRORDEF_( Invalid_Composite, 0x15, \
"invalid composite glyph" )
FT_ERRORDEF_( Too_Many_Hints, 0x16, \
"too many hints" )
FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, \
"invalid pixel size" )
/* handle errors */
FT_ERRORDEF_( Invalid_Handle, 0x20, \
"invalid object handle" )
FT_ERRORDEF_( Invalid_Library_Handle, 0x21, \
"invalid library handle" )
FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, \
"invalid module handle" )
FT_ERRORDEF_( Invalid_Face_Handle, 0x23, \
"invalid face handle" )
FT_ERRORDEF_( Invalid_Size_Handle, 0x24, \
"invalid size handle" )
FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, \
"invalid glyph slot handle" )
FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, \
"invalid charmap handle" )
FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, \
"invalid cache manager handle" )
FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, \
"invalid stream handle" )
/* driver errors */
FT_ERRORDEF_( Too_Many_Drivers, 0x30, \
"too many modules" )
FT_ERRORDEF_( Too_Many_Extensions, 0x31, \
"too many extensions" )
/* memory errors */
FT_ERRORDEF_( Out_Of_Memory, 0x40, \
"out of memory" )
FT_ERRORDEF_( Unlisted_Object, 0x41, \
"unlisted object" )
/* stream errors */
FT_ERRORDEF_( Cannot_Open_Stream, 0x51, \
"cannot open stream" )
FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, \
"invalid stream seek" )
FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, \
"invalid stream skip" )
FT_ERRORDEF_( Invalid_Stream_Read, 0x54, \
"invalid stream read" )
FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, \
"invalid stream operation" )
FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, \
"invalid frame operation" )
FT_ERRORDEF_( Nested_Frame_Access, 0x57, \
"nested frame access" )
FT_ERRORDEF_( Invalid_Frame_Read, 0x58, \
"invalid frame read" )
/* raster errors */
FT_ERRORDEF_( Raster_Uninitialized, 0x60, \
"raster uninitialized" )
FT_ERRORDEF_( Raster_Corrupted, 0x61, \
"raster corrupted" )
FT_ERRORDEF_( Raster_Overflow, 0x62, \
"raster overflow" )
FT_ERRORDEF_( Raster_Negative_Height, 0x63, \
"negative height while rastering" )
/* cache errors */
FT_ERRORDEF_( Too_Many_Caches, 0x70, \
"too many registered caches" )
/* TrueType and SFNT errors */
FT_ERRORDEF_( Invalid_Opcode, 0x80, \
"invalid opcode" )
FT_ERRORDEF_( Too_Few_Arguments, 0x81, \
"too few arguments" )
FT_ERRORDEF_( Stack_Overflow, 0x82, \
"stack overflow" )
FT_ERRORDEF_( Code_Overflow, 0x83, \
"code overflow" )
FT_ERRORDEF_( Bad_Argument, 0x84, \
"bad argument" )
FT_ERRORDEF_( Divide_By_Zero, 0x85, \
"division by zero" )
FT_ERRORDEF_( Invalid_Reference, 0x86, \
"invalid reference" )
FT_ERRORDEF_( Debug_OpCode, 0x87, \
"found debug opcode" )
FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, \
"found ENDF opcode in execution stream" )
FT_ERRORDEF_( Nested_DEFS, 0x89, \
"nested DEFS" )
FT_ERRORDEF_( Invalid_CodeRange, 0x8A, \
"invalid code range" )
FT_ERRORDEF_( Execution_Too_Long, 0x8B, \
"execution context too long" )
FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, \
"too many function definitions" )
FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, \
"too many instruction definitions" )
FT_ERRORDEF_( Table_Missing, 0x8E, \
"SFNT font table missing" )
FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, \
"horizontal header (hhea) table missing" )
FT_ERRORDEF_( Locations_Missing, 0x90, \
"locations (loca) table missing" )
FT_ERRORDEF_( Name_Table_Missing, 0x91, \
"name table missing" )
FT_ERRORDEF_( CMap_Table_Missing, 0x92, \
"character map (cmap) table missing" )
FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, \
"horizontal metrics (hmtx) table missing" )
FT_ERRORDEF_( Post_Table_Missing, 0x94, \
"PostScript (post) table missing" )
FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, \
"invalid horizontal metrics" )
FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, \
"invalid character map (cmap) format" )
FT_ERRORDEF_( Invalid_PPem, 0x97, \
"invalid ppem value" )
FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, \
"invalid vertical metrics" )
FT_ERRORDEF_( Could_Not_Find_Context, 0x99, \
"could not find context" )
FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, \
"invalid PostScript (post) table format" )
FT_ERRORDEF_( Invalid_Post_Table, 0x9B, \
"invalid PostScript (post) table" )
/* CFF, CID, and Type 1 errors */
FT_ERRORDEF_( Syntax_Error, 0xA0, \
"opcode syntax error" )
FT_ERRORDEF_( Stack_Underflow, 0xA1, \
"argument stack underflow" )
FT_ERRORDEF_( Ignore, 0xA2, \
"ignore" )
FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, \
"no Unicode glyph name found" )
/* BDF errors */
FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, \
"`STARTFONT' field missing" )
FT_ERRORDEF_( Missing_Font_Field, 0xB1, \
"`FONT' field missing" )
FT_ERRORDEF_( Missing_Size_Field, 0xB2, \
"`SIZE' field missing" )
FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, \
"`FONTBOUNDINGBOX' field missing" )
FT_ERRORDEF_( Missing_Chars_Field, 0xB4, \
"`CHARS' field missing" )
FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, \
"`STARTCHAR' field missing" )
FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, \
"`ENCODING' field missing" )
FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, \
"`BBX' field missing" )
FT_ERRORDEF_( Bbx_Too_Big, 0xB8, \
"`BBX' too big" )
FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, \
"Font header corrupted or missing fields" )
FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, \
"Font glyphs corrupted or missing fields" )
/* END */
#ifdef FT_ERROR_END_LIST
FT_ERROR_END_LIST
#endif
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SIMPLE CLEANUP *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_NEED_EXTERN_C
}
#endif
#undef FT_ERROR_START_LIST
#undef FT_ERROR_END_LIST
#undef FT_ERRORDEF
#undef FT_ERRORDEF_
#undef FT_NOERRORDEF_
#undef FT_NEED_EXTERN_C
#undef FT_ERR_BASE
/* FT_KEEP_ERR_PREFIX is needed for ftvalid.h */
#ifndef FT_KEEP_ERR_PREFIX
#undef FT_ERR_PREFIX
#else
#undef FT_KEEP_ERR_PREFIX
#endif
/* __FTERRORS_H__ */
#endif
/* END */
/* END */
/* END */
/***************************************************************************/
/* */
/* afangles.c */
/* */
/* Routines used to compute vector angles with limited accuracy */
/* and very high speed. It also contains sorting routines (body). */
/* */
/* Copyright 2003-2006, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* aftypes.h */
/* */
/* Auto-fitter types (specification only). */
/* */
/* Copyright 2003-2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************
*
* The auto-fitter is a complete rewrite of the old auto-hinter.
* Its main feature is the ability to differentiate between different
* scripts in order to apply language-specific rules.
*
* The code has also been compartmentized into several entities that
* should make algorithmic experimentation easier than with the old
* code.
*
* Finally, we get rid of the Catharon license, since this code is
* released under the FreeType one.
*
*************************************************************************/
#define __AFTYPES_H__
FT_BEGIN_HEADER
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** D E B U G G I N G *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** U T I L I T Y S T U F F *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
typedef struct AF_WidthRec_
{
/* original position/width in font units */
FT_Pos org;
/* current/scaled position/width in device sub-pixels */
FT_Pos cur;
/* current/fitted position/width in device sub-pixels */
FT_Pos fit;
} AF_WidthRec, *AF_Width;
FT_LOCAL( void )
af_sort_pos( FT_UInt count,
FT_Pos* table );
FT_LOCAL( void )
af_sort_and_quantize_widths( FT_UInt* count,
AF_Width widths,
FT_Pos threshold );
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** A N G L E T Y P E S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*
* The auto-fitter doesn't need a very high angular accuracy;
* this allows us to speed up some computations considerably with a
* light Cordic algorithm (see afangles.c).
*/
typedef FT_Int AF_Angle;
#define AF_ANGLE_PI 256
#define AF_ANGLE_2PI ( AF_ANGLE_PI * 2 )
#define AF_ANGLE_PI2 ( AF_ANGLE_PI / 2 )
#define AF_ANGLE_PI4 ( AF_ANGLE_PI / 4 )
#if 0
/*
* compute the angle of a given 2-D vector
*/
FT_LOCAL( AF_Angle )
af_angle_atan( FT_Pos dx,
FT_Pos dy );
/*
* compute `angle2 - angle1'; the result is always within
* the range [-AF_ANGLE_PI .. AF_ANGLE_PI - 1]
*/
FT_LOCAL( AF_Angle )
af_angle_diff( AF_Angle angle1,
AF_Angle angle2 );
/* 0 */
#endif
#define AF_ANGLE_DIFF( result, angle1, angle2 ) \
FT_BEGIN_STMNT \
AF_Angle _delta = (angle2) - (angle1); \
\
\
_delta %= AF_ANGLE_2PI; \
if ( _delta < 0 ) \
_delta += AF_ANGLE_2PI; \
\
if ( _delta > AF_ANGLE_PI ) \
_delta -= AF_ANGLE_2PI; \
\
result = _delta; \
FT_END_STMNT
/* opaque handle to glyph-specific hints -- see `afhints.h' for more
* details
*/
typedef struct AF_GlyphHintsRec_* AF_GlyphHints;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** S C A L E R S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*
* A scaler models the target pixel device that will receive the
* auto-hinted glyph image.
*/
typedef enum AF_ScalerFlags_
{
/* disable horizontal hinting */
AF_SCALER_FLAG_NO_HORIZONTAL = 1,
/* disable vertical hinting */
AF_SCALER_FLAG_NO_VERTICAL = 2,
/* disable advance hinting */
AF_SCALER_FLAG_NO_ADVANCE = 4
} AF_ScalerFlags;
typedef struct AF_ScalerRec_
{
/* source font face */
FT_Face face;
/* from font units to 1/64th device pixels */
FT_Fixed x_scale;
/* from font units to 1/64th device pixels */
FT_Fixed y_scale;
/* in 1/64th device pixels */
FT_Pos x_delta;
/* in 1/64th device pixels */
FT_Pos y_delta;
/* monochrome, anti-aliased, LCD, etc. */
FT_Render_Mode render_mode;
/* additional control flags, see above */
FT_UInt32 flags;
} AF_ScalerRec, *AF_Scaler;
#define AF_SCALER_EQUAL_SCALES( a, b ) \
( (a)->x_scale == (b)->x_scale && \
(a)->y_scale == (b)->y_scale && \
(a)->x_delta == (b)->x_delta && \
(a)->y_delta == (b)->y_delta )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** S C R I P T S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*
* The list of known scripts. Each different script corresponds to the
* following information:
*
* - A set of Unicode ranges to test whether the face supports the
* script.
*
* - A specific global analyzer that will compute global metrics
* specific to the script.
*
* - A specific glyph analyzer that will compute segments and
* edges for each glyph covered by the script.
*
* - A specific grid-fitting algorithm that will distort the
* scaled glyph outline according to the results of the glyph
* analyzer.
*
* Note that a given analyzer and/or grid-fitting algorithm can be
* used by more than one script.
*/
typedef enum AF_Script_
{
AF_SCRIPT_DUMMY = 0,
AF_SCRIPT_LATIN = 1,
AF_SCRIPT_CJK = 2,
AF_SCRIPT_INDIC = 3,
#ifdef FT_OPTION_AUTOFIT2
AF_SCRIPT_LATIN2 = 4,
#endif
/* add new scripts here. Don't forget to update the list in */
/* `afglobal.c'. */
/* do not remove */
AF_SCRIPT_MAX
} AF_Script;
typedef struct AF_ScriptClassRec_ const* AF_ScriptClass;
typedef struct AF_FaceGlobalsRec_* AF_FaceGlobals;
typedef struct AF_ScriptMetricsRec_
{
AF_ScriptClass clazz;
AF_ScalerRec scaler;
FT_Bool digits_have_same_width;
/* to access properties */
AF_FaceGlobals globals;
} AF_ScriptMetricsRec, *AF_ScriptMetrics;
/* This function parses an FT_Face to compute global metrics for
* a specific script.
*/
typedef FT_Error
(*AF_Script_InitMetricsFunc)( AF_ScriptMetrics metrics,
FT_Face face );
typedef void
(*AF_Script_ScaleMetricsFunc)( AF_ScriptMetrics metrics,
AF_Scaler scaler );
typedef void
(*AF_Script_DoneMetricsFunc)( AF_ScriptMetrics metrics );
typedef FT_Error
(*AF_Script_InitHintsFunc)( AF_GlyphHints hints,
AF_ScriptMetrics metrics );
typedef void
(*AF_Script_ApplyHintsFunc)( AF_GlyphHints hints,
FT_Outline* outline,
AF_ScriptMetrics metrics );
typedef struct AF_Script_UniRangeRec_
{
FT_UInt32 first;
FT_UInt32 last;
} AF_Script_UniRangeRec;
#define AF_UNIRANGE_REC( a, b ) { (FT_UInt32)(a), (FT_UInt32)(b) }
typedef const AF_Script_UniRangeRec *AF_Script_UniRange;
typedef struct AF_ScriptClassRec_
{
AF_Script script;
/* last must be { 0, 0 } */
AF_Script_UniRange script_uni_ranges;
/* for default width and height */
FT_UInt32 standard_char;
FT_Offset script_metrics_size;
AF_Script_InitMetricsFunc script_metrics_init;
AF_Script_ScaleMetricsFunc script_metrics_scale;
AF_Script_DoneMetricsFunc script_metrics_done;
AF_Script_InitHintsFunc script_hints_init;
AF_Script_ApplyHintsFunc script_hints_apply;
} AF_ScriptClassRec;
/* Declare and define vtables for classes */
#define AF_DECLARE_SCRIPT_CLASS( script_class ) \
FT_CALLBACK_TABLE const AF_ScriptClassRec \
script_class;
#define AF_DEFINE_SCRIPT_CLASS( script_class, script_, ranges, def_char, \
m_size, \
m_init, m_scale, m_done, h_init, h_apply ) \
FT_CALLBACK_TABLE_DEF const AF_ScriptClassRec script_class = \
{ \
script_, \
ranges, \
def_char, \
\
m_size, \
\
m_init, \
m_scale, \
m_done, \
\
h_init, \
h_apply \
};
/* */
FT_END_HEADER
/* END */
#if 0
FT_LOCAL_DEF( FT_Int )
af_corner_is_flat( FT_Pos x_in,
FT_Pos y_in,
FT_Pos x_out,
FT_Pos y_out )
{
FT_Pos ax = x_in;
FT_Pos ay = y_in;
FT_Pos d_in, d_out, d_corner;
if ( ax < 0 )
ax = -ax;
if ( ay < 0 )
ay = -ay;
d_in = ax + ay;
ax = x_out;
if ( ax < 0 )
ax = -ax;
ay = y_out;
if ( ay < 0 )
ay = -ay;
d_out = ax + ay;
ax = x_out + x_in;
if ( ax < 0 )
ax = -ax;
ay = y_out + y_in;
if ( ay < 0 )
ay = -ay;
d_corner = ax + ay;
return ( d_in + d_out - d_corner ) < ( d_corner >> 4 );
}
FT_LOCAL_DEF( FT_Int )
af_corner_orientation( FT_Pos x_in,
FT_Pos y_in,
FT_Pos x_out,
FT_Pos y_out )
{
FT_Pos delta;
delta = x_in * y_out - y_in * x_out;
if ( delta == 0 )
return 0;
else
return 1 - 2 * ( delta < 0 );
}
/* 0 */
#endif
/*
* We are not using `af_angle_atan' anymore, but we keep the source
* code below just in case...
*/
#if 0
/*
* The trick here is to realize that we don't need a very accurate angle
* approximation. We are going to use the result of `af_angle_atan' to
* only compare the sign of angle differences, or check whether its
* magnitude is very small.
*
* The approximation
*
* dy * PI / (|dx|+|dy|)
*
* should be enough, and much faster to compute.
*/
FT_LOCAL_DEF( AF_Angle )
af_angle_atan( FT_Fixed dx,
FT_Fixed dy )
{
AF_Angle angle;
FT_Fixed ax = dx;
FT_Fixed ay = dy;
if ( ax < 0 )
ax = -ax;
if ( ay < 0 )
ay = -ay;
ax += ay;
if ( ax == 0 )
angle = 0;
else
{
angle = ( AF_ANGLE_PI2 * dy ) / ( ax + ay );
if ( dx < 0 )
{
if ( angle >= 0 )
angle = AF_ANGLE_PI - angle;
else
angle = -AF_ANGLE_PI - angle;
}
}
return angle;
}
#elif 0
/* the following table has been automatically generated with */
/* the `mather.py' Python script */
#define AF_ATAN_BITS 8
static const FT_Byte af_arctan[1L << AF_ATAN_BITS] =
{
0, 0, 1, 1, 1, 2, 2, 2,
3, 3, 3, 3, 4, 4, 4, 5,
5, 5, 6, 6, 6, 7, 7, 7,
8, 8, 8, 9, 9, 9, 10, 10,
10, 10, 11, 11, 11, 12, 12, 12,
13, 13, 13, 14, 14, 14, 14, 15,
15, 15, 16, 16, 16, 17, 17, 17,
18, 18, 18, 18, 19, 19, 19, 20,
20, 20, 21, 21, 21, 21, 22, 22,
22, 23, 23, 23, 24, 24, 24, 24,
25, 25, 25, 26, 26, 26, 26, 27,
27, 27, 28, 28, 28, 28, 29, 29,
29, 30, 30, 30, 30, 31, 31, 31,
31, 32, 32, 32, 33, 33, 33, 33,
34, 34, 34, 34, 35, 35, 35, 35,
36, 36, 36, 36, 37, 37, 37, 38,
38, 38, 38, 39, 39, 39, 39, 40,
40, 40, 40, 41, 41, 41, 41, 42,
42, 42, 42, 42, 43, 43, 43, 43,
44, 44, 44, 44, 45, 45, 45, 45,
46, 46, 46, 46, 46, 47, 47, 47,
47, 48, 48, 48, 48, 48, 49, 49,
49, 49, 50, 50, 50, 50, 50, 51,
51, 51, 51, 51, 52, 52, 52, 52,
52, 53, 53, 53, 53, 53, 54, 54,
54, 54, 54, 55, 55, 55, 55, 55,
56, 56, 56, 56, 56, 57, 57, 57,
57, 57, 57, 58, 58, 58, 58, 58,
59, 59, 59, 59, 59, 59, 60, 60,
60, 60, 60, 61, 61, 61, 61, 61,
61, 62, 62, 62, 62, 62, 62, 63,
63, 63, 63, 63, 63, 64, 64, 64
};
FT_LOCAL_DEF( AF_Angle )
af_angle_atan( FT_Fixed dx,
FT_Fixed dy )
{
AF_Angle angle;
/* check trivial cases */
if ( dy == 0 )
{
angle = 0;
if ( dx < 0 )
angle = AF_ANGLE_PI;
return angle;
}
else if ( dx == 0 )
{
angle = AF_ANGLE_PI2;
if ( dy < 0 )
angle = -AF_ANGLE_PI2;
return angle;
}
angle = 0;
if ( dx < 0 )
{
dx = -dx;
dy = -dy;
angle = AF_ANGLE_PI;
}
if ( dy < 0 )
{
FT_Pos tmp;
tmp = dx;
dx = -dy;
dy = tmp;
angle -= AF_ANGLE_PI2;
}
if ( dx == 0 && dy == 0 )
return 0;
if ( dx == dy )
angle += AF_ANGLE_PI4;
else if ( dx > dy )
angle += af_arctan[FT_DivFix( dy, dx ) >> ( 16 - AF_ATAN_BITS )];
else
angle += AF_ANGLE_PI2 -
af_arctan[FT_DivFix( dx, dy ) >> ( 16 - AF_ATAN_BITS )];
if ( angle > AF_ANGLE_PI )
angle -= AF_ANGLE_2PI;
return angle;
}
/* 0 */
#endif
FT_LOCAL_DEF( void )
af_sort_pos( FT_UInt count,
FT_Pos* table )
{
FT_UInt i, j;
FT_Pos swap;
for ( i = 1; i < count; i++ )
{
for ( j = i; j > 0; j-- )
{
if ( table[j] >= table[j - 1] )
break;
swap = table[j];
table[j] = table[j - 1];
table[j - 1] = swap;
}
}
}
FT_LOCAL_DEF( void )
af_sort_and_quantize_widths( FT_UInt* count,
AF_Width table,
FT_Pos threshold )
{
FT_UInt i, j;
FT_UInt cur_idx;
FT_Pos cur_val;
FT_Pos sum;
AF_WidthRec swap;
if ( *count == 1 )
return;
/* sort */
for ( i = 1; i < *count; i++ )
{
for ( j = i; j > 0; j-- )
{
if ( table[j].org >= table[j - 1].org )
break;
swap = table[j];
table[j] = table[j - 1];
table[j - 1] = swap;
}
}
cur_idx = 0;
cur_val = table[cur_idx].org;
/* compute and use mean values for clusters not larger than */
/* `threshold'; this is very primitive and might not yield */
/* the best result, but normally, using reference character */
/* `o', `*count' is 2, so the code below is fully sufficient */
for ( i = 1; i < *count; i++ )
{
if ( table[i].org - cur_val > threshold ||
i == *count - 1 )
{
sum = 0;
/* fix loop for end of array */
if ( table[i].org - cur_val <= threshold &&
i == *count - 1 )
i++;
for ( j = cur_idx; j < i; j++ )
{
sum += table[j].org;
table[j].org = 0;
}
table[cur_idx].org = sum / j;
if ( i < *count - 1 )
{
cur_idx = i + 1;
cur_val = table[cur_idx].org;
}
}
}
cur_idx = 1;
/* compress array to remove zero values */
for ( i = 1; i < *count; i++ )
{
if ( table[i].org )
table[cur_idx++] = table[i];
}
*count = cur_idx;
}
/* END */
/***************************************************************************/
/* */
/* afglobal.c */
/* */
/* Auto-fitter routines to compute global hinting values (body). */
/* */
/* Copyright 2003-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* afglobal.h */
/* */
/* Auto-fitter routines to compute global hinting values */
/* (specification). */
/* */
/* Copyright 2003-2005, 2007, 2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFGLOBAL_H__
/***************************************************************************/
/* */
/* afmodule.h */
/* */
/* Auto-fitter module implementation (specification). */
/* */
/* Copyright 2003, 2004, 2005 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFMODULE_H__
/***************************************************************************/
/* */
/* afloader.h */
/* */
/* Auto-fitter glyph loading routines (specification). */
/* */
/* Copyright 2003-2005, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFLOADER_H__
/***************************************************************************/
/* */
/* afhints.h */
/* */
/* Auto-fitter hinting routines (specification). */
/* */
/* Copyright 2003-2008, 2010-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFHINTS_H__
#define xxAF_SORT_SEGMENTS
FT_BEGIN_HEADER
/*
* The definition of outline glyph hints. These are shared by all
* script analysis routines (until now).
*/
typedef enum AF_Dimension_
{
/* x coordinates, */
AF_DIMENSION_HORZ = 0,
/* i.e., vertical segments & edges */
/* y coordinates, */
AF_DIMENSION_VERT = 1,
/* i.e., horizontal segments & edges */
/* do not remove */
AF_DIMENSION_MAX
} AF_Dimension;
/* hint directions -- the values are computed so that two vectors are */
/* in opposite directions iff `dir1 + dir2 == 0' */
typedef enum AF_Direction_
{
AF_DIR_NONE = 4,
AF_DIR_RIGHT = 1,
AF_DIR_LEFT = -1,
AF_DIR_UP = 2,
AF_DIR_DOWN = -2
} AF_Direction;
/*
* The following explanations are mostly taken from the article
*
* Real-Time Grid Fitting of Typographic Outlines
*
* by David Turner and Werner Lemberg
*
* http://www.tug.org/TUGboat/Articles/tb24-3/lemberg.pdf
*
*
* Segments
*
* `af_{cjk,latin,...}_hints_compute_segments' are the functions to
* find segments in an outline. A segment is a series of consecutive
* points that are approximately aligned along a coordinate axis. The
* analysis to do so is specific to a script.
*
* A segment must have at least two points, except in the case of
* `fake' segments that are generated to hint metrics appropriately,
* and which consist of a single point.
*
*
* Edges
*
* As soon as segments are defined, the auto-hinter groups them into
* edges. An edge corresponds to a single position on the main
* dimension that collects one or more segments (allowing for a small
* threshold).
*
* The auto-hinter first tries to grid fit edges, then to align
* segments on the edges unless it detects that they form a serif.
*
* `af_{cjk,latin,...}_hints_compute_edges' are the functions to find
* edges; they are specific to a script.
*
*
* A H
* | |
* | |
* | |
* | |
* C | | F
* +------<-----+ +-----<------+
* | B G |
* | |
* | |
* +--------------->------------------+
* D E
*
*
* Stems
*
* Segments need to be `linked' to other ones in order to detect stems.
* A stem is made of two segments that face each other in opposite
* directions and that are sufficiently close to each other. Using
* vocabulary from the TrueType specification, stem segments form a
* `black distance'.
*
* In the above ASCII drawing, the horizontal segments are BC, DE, and
* FG; the vertical segments are AB, CD, EF, and GH.
*
* Each segment has at most one `best' candidate to form a black
* distance, or no candidate at all. Notice that two distinct segments
* can have the same candidate, which frequently means a serif.
*
* A stem is recognized by the following condition:
*
* best segment_1 = segment_2 && best segment_2 = segment_1
*
* The best candidate is stored in field `link' in structure
* `AF_Segment'.
*
* Stems are detected by `af_{cjk,latin,...}_hint_edges'.
*
* In the above ASCII drawing, the best candidate for both AB and CD is
* GH, while the best candidate for GH is AB. Similarly, the best
* candidate for EF and GH is AB, while the best candidate for AB is
* GH.
*
*
* Serifs
*
* On the opposite, a serif has
*
* best segment_1 = segment_2 && best segment_2 != segment_1
*
* where segment_1 corresponds to the serif segment (CD and EF in the
* above ASCII drawing).
*
* The best candidate is stored in field `serif' in structure
* `AF_Segment' (and `link' is set to NULL).
*
* Serifs are detected by `af_{cjk,latin,...}_hint_edges'.
*
*
* Touched points
*
* A point is called `touched' if it has been processed somehow by the
* auto-hinter. It basically means that it shouldn't be moved again
* (or moved only under certain constraints to preserve the already
* applied processing).
*
*
* Flat and round segments
*
* Segments are `round' or `flat', depending on the series of points
* that define them. A segment is round if the next and previous point
* of an extremum (which can be either a single point or sequence of
* points) are both conic or cubic control points. Otherwise, a
* segment with an extremum is flat.
*
*
* Strong Points
*
* Experience has shown that points which are not part of an edge need
* to be interpolated linearly between their two closest edges, even if
* these are not part of the contour of those particular points.
* Typical candidates for this are
*
* - angle points (i.e., points where the `in' and `out' direction
* differ greatly)
*
* - inflection points (i.e., where the `in' and `out' angles are the
* same, but the curvature changes sign)
*
* `af_glyph_hints_align_strong_points' is the function which takes
* care of such situations; it is equivalent to the TrueType `IP'
* hinting instruction.
*
*
* Weak Points
*
* Other points in the outline must be interpolated using the
* coordinates of their previous and next unfitted contour neighbours.
* These are called `weak points' and are touched by the function
* `af_glyph_hints_align_weak_points', equivalent to the TrueType `IUP'
* hinting instruction. Typical candidates are control points and
* points on the contour without a major direction.
*
* The major effect is to reduce possible distortion caused by
* alignment of edges and strong points, thus weak points are processed
* after strong points.
*/
/* point hint flags */
typedef enum AF_Flags_
{
AF_FLAG_NONE = 0,
/* point type flags */
AF_FLAG_CONIC = 1 << 0,
AF_FLAG_CUBIC = 1 << 1,
AF_FLAG_CONTROL = AF_FLAG_CONIC | AF_FLAG_CUBIC,
/* point extremum flags */
AF_FLAG_EXTREMA_X = 1 << 2,
AF_FLAG_EXTREMA_Y = 1 << 3,
/* point roundness flags */
AF_FLAG_ROUND_X = 1 << 4,
AF_FLAG_ROUND_Y = 1 << 5,
/* point touch flags */
AF_FLAG_TOUCH_X = 1 << 6,
AF_FLAG_TOUCH_Y = 1 << 7,
/* candidates for weak interpolation have this flag set */
AF_FLAG_WEAK_INTERPOLATION = 1 << 8,
/* all inflection points in the outline have this flag set */
AF_FLAG_INFLECTION = 1 << 9
} AF_Flags;
/* edge hint flags */
typedef enum AF_Edge_Flags_
{
AF_EDGE_NORMAL = 0,
AF_EDGE_ROUND = 1 << 0,
AF_EDGE_SERIF = 1 << 1,
AF_EDGE_DONE = 1 << 2
} AF_Edge_Flags;
typedef struct AF_PointRec_* AF_Point;
typedef struct AF_SegmentRec_* AF_Segment;
typedef struct AF_EdgeRec_* AF_Edge;
typedef struct AF_PointRec_
{
/* point flags used by hinter */
FT_UShort flags;
/* direction of inwards vector */
FT_Char in_dir;
/* direction of outwards vector */
FT_Char out_dir;
/* original, scaled position */
FT_Pos ox, oy;
/* original, unscaled position (in font units) */
FT_Short fx, fy;
/* current position */
FT_Pos x, y;
/* current (x,y) or (y,x) depending on context */
FT_Pos u, v;
/* next point in contour */
AF_Point next;
/* previous point in contour */
AF_Point prev;
} AF_PointRec;
typedef struct AF_SegmentRec_
{
/* edge/segment flags for this segment */
FT_Byte flags;
/* segment direction */
FT_Char dir;
/* position of segment */
FT_Short pos;
/* minimum coordinate of segment */
FT_Short min_coord;
/* maximum coordinate of segment */
FT_Short max_coord;
/* the hinted segment height */
FT_Short height;
/* the segment's parent edge */
AF_Edge edge;
/* link to next segment in parent edge */
AF_Segment edge_next;
/* (stem) link segment */
AF_Segment link;
/* primary segment for serifs */
AF_Segment serif;
/* number of linked segments */
FT_Pos num_linked;
/* used during stem matching */
FT_Pos score;
/* used during stem matching */
FT_Pos len;
/* first point in edge segment */
AF_Point first;
/* last point in edge segment */
AF_Point last;
} AF_SegmentRec;
typedef struct AF_EdgeRec_
{
/* original, unscaled position (in font units) */
FT_Short fpos;
/* original, scaled position */
FT_Pos opos;
/* current position */
FT_Pos pos;
/* edge flags */
FT_Byte flags;
/* edge direction */
FT_Char dir;
/* used to speed up interpolation between edges */
FT_Fixed scale;
/* non-NULL if this is a blue edge */
AF_Width blue_edge;
/* link edge */
AF_Edge link;
/* primary edge for serifs */
AF_Edge serif;
/* number of linked edges */
FT_Short num_linked;
/* used during stem matching */
FT_Int score;
/* first segment in edge */
AF_Segment first;
/* last segment in edge */
AF_Segment last;
} AF_EdgeRec;
typedef struct AF_AxisHintsRec_
{
/* number of used segments */
FT_Int num_segments;
/* number of allocated segments */
FT_Int max_segments;
/* segments array */
AF_Segment segments;
#ifdef AF_SORT_SEGMENTS
FT_Int mid_segments;
#endif
/* number of used edges */
FT_Int num_edges;
/* number of allocated edges */
FT_Int max_edges;
/* edges array */
AF_Edge edges;
/* either vertical or horizontal */
AF_Direction major_dir;
} AF_AxisHintsRec, *AF_AxisHints;
typedef struct AF_GlyphHintsRec_
{
FT_Memory memory;
FT_Fixed x_scale;
FT_Pos x_delta;
FT_Fixed y_scale;
FT_Pos y_delta;
/* number of allocated points */
FT_Int max_points;
/* number of used points */
FT_Int num_points;
/* points array */
AF_Point points;
/* number of allocated contours */
FT_Int max_contours;
/* number of used contours */
FT_Int num_contours;
/* contours array */
AF_Point* contours;
AF_AxisHintsRec axis[AF_DIMENSION_MAX];
/* copy of scaler flags */
FT_UInt32 scaler_flags;
/* free for script-specific */
FT_UInt32 other_flags;
/* implementations */
AF_ScriptMetrics metrics;
/* used for warping */
FT_Pos xmin_delta;
FT_Pos xmax_delta;
} AF_GlyphHintsRec;
#define AF_HINTS_TEST_SCALER( h, f ) ( (h)->scaler_flags & (f) )
#define AF_HINTS_TEST_OTHER( h, f ) ( (h)->other_flags & (f) )
#define AF_HINTS_DO_HORIZONTAL( h ) \
!AF_HINTS_TEST_SCALER( h, AF_SCALER_FLAG_NO_HORIZONTAL )
#define AF_HINTS_DO_VERTICAL( h ) \
!AF_HINTS_TEST_SCALER( h, AF_SCALER_FLAG_NO_VERTICAL )
#define AF_HINTS_DO_ADVANCE( h ) \
!AF_HINTS_TEST_SCALER( h, AF_SCALER_FLAG_NO_ADVANCE )
#define AF_HINTS_DO_BLUES( h ) 1
FT_LOCAL( AF_Direction )
af_direction_compute( FT_Pos dx,
FT_Pos dy );
FT_LOCAL( FT_Error )
af_axis_hints_new_segment( AF_AxisHints axis,
FT_Memory memory,
AF_Segment *asegment );
FT_LOCAL( FT_Error)
af_axis_hints_new_edge( AF_AxisHints axis,
FT_Int fpos,
AF_Direction dir,
FT_Memory memory,
AF_Edge *edge );
FT_LOCAL( void )
af_glyph_hints_init( AF_GlyphHints hints,
FT_Memory memory );
FT_LOCAL( void )
af_glyph_hints_rescale( AF_GlyphHints hints,
AF_ScriptMetrics metrics );
FT_LOCAL( FT_Error )
af_glyph_hints_reload( AF_GlyphHints hints,
FT_Outline* outline );
FT_LOCAL( void )
af_glyph_hints_save( AF_GlyphHints hints,
FT_Outline* outline );
FT_LOCAL( void )
af_glyph_hints_align_edge_points( AF_GlyphHints hints,
AF_Dimension dim );
FT_LOCAL( void )
af_glyph_hints_align_strong_points( AF_GlyphHints hints,
AF_Dimension dim );
FT_LOCAL( void )
af_glyph_hints_align_weak_points( AF_GlyphHints hints,
AF_Dimension dim );
FT_LOCAL( void )
af_glyph_hints_done( AF_GlyphHints hints );
/* */
#define AF_SEGMENT_LEN( seg ) ( (seg)->max_coord - (seg)->min_coord )
#define AF_SEGMENT_DIST( seg1, seg2 ) ( ( (seg1)->pos > (seg2)->pos ) \
? (seg1)->pos - (seg2)->pos \
: (seg2)->pos - (seg1)->pos )
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
typedef struct AF_ModuleRec_* AF_Module;
/*
* The autofitter module's (global) data structure to communicate with
* actual fonts. If necessary, `local' data like the current face, the
* current face's auto-hint data, or the current glyph's parameters
* relevant to auto-hinting are `swapped in'. Cf. functions like
* `af_loader_reset' and `af_loader_load_g'.
*/
typedef struct AF_LoaderRec_
{
/* current face data */
FT_Face face;
AF_FaceGlobals globals;
/* current glyph data */
FT_GlyphLoader gloader;
AF_GlyphHintsRec hints;
AF_ScriptMetrics metrics;
FT_Bool transformed;
FT_Matrix trans_matrix;
FT_Vector trans_delta;
FT_Vector pp1;
FT_Vector pp2;
/* we don't handle vertical phantom points */
} AF_LoaderRec, *AF_Loader;
FT_LOCAL( FT_Error )
af_loader_init( AF_Module module );
FT_LOCAL( FT_Error )
af_loader_reset( AF_Module module,
FT_Face face );
FT_LOCAL( void )
af_loader_done( AF_Module module );
FT_LOCAL( FT_Error )
af_loader_load_glyph( AF_Module module,
FT_Face face,
FT_UInt gindex,
FT_Int32 load_flags );
/* */
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*
* This is the `extended' FT_Module structure which holds the
* autofitter's global data. Right before hinting a glyph, the data
* specific to the glyph's face (blue zones, stem widths, etc.) are
* loaded into `loader' (see function `af_loader_reset').
*/
typedef struct AF_ModuleRec_
{
FT_ModuleRec root;
FT_UInt fallback_script;
AF_LoaderRec loader[1];
} AF_ModuleRec;
FT_DECLARE_MODULE(autofit_module_class)
FT_END_HEADER
/* END */
FT_BEGIN_HEADER
/*
* Default values and flags for both autofitter globals (found in
* AF_ModuleRec) and face globals (in AF_FaceGlobalsRec).
*/
/* index of fallback script in `af_script_classes' */
#define AF_SCRIPT_FALLBACK 2
/* a bit mask indicating an uncovered glyph */
#define AF_SCRIPT_NONE 0x7F
/* if this flag is set, we have an ASCII digit */
#define AF_DIGIT 0x80
/* `increase-x-height' property */
#define AF_PROP_INCREASE_X_HEIGHT_MIN 6
#define AF_PROP_INCREASE_X_HEIGHT_MAX 0
/************************************************************************/
/************************************************************************/
/***** *****/
/***** F A C E G L O B A L S *****/
/***** *****/
/************************************************************************/
/************************************************************************/
/*
* Note that glyph_scripts[] is used to map each glyph into
* an index into the `af_script_classes' array.
*
*/
typedef struct AF_FaceGlobalsRec_
{
FT_Face face;
/* same as face->num_glyphs */
FT_Long glyph_count;
FT_Byte* glyph_scripts;
/* per-face auto-hinter properties */
FT_UInt increase_x_height;
AF_ScriptMetrics metrics[AF_SCRIPT_MAX];
/* to access global properties */
AF_Module module;
} AF_FaceGlobalsRec;
/*
* model the global hints data for a given face, decomposed into
* script-specific items
*/
FT_LOCAL( FT_Error )
af_face_globals_new( FT_Face face,
AF_FaceGlobals *aglobals,
AF_Module module );
FT_LOCAL( FT_Error )
af_face_globals_get_metrics( AF_FaceGlobals globals,
FT_UInt gindex,
FT_UInt options,
AF_ScriptMetrics *ametrics );
FT_LOCAL( void )
af_face_globals_free( AF_FaceGlobals globals );
FT_LOCAL_DEF( FT_Bool )
af_face_globals_is_digit( AF_FaceGlobals globals,
FT_UInt gindex );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* afdummy.h */
/* */
/* Auto-fitter dummy routines to be used if no hinting should be */
/* performed (specification). */
/* */
/* Copyright 2003-2005, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFDUMMY_H__
FT_BEGIN_HEADER
/* A dummy script metrics class used when no hinting should
* be performed. This is the default for non-latin glyphs!
*/
AF_DECLARE_SCRIPT_CLASS( af_dummy_script_class )
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* aflatin.h */
/* */
/* Auto-fitter hinting routines for latin script (specification). */
/* */
/* Copyright 2003-2007, 2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFLATIN_H__
FT_BEGIN_HEADER
/* the latin-specific script class */
AF_DECLARE_SCRIPT_CLASS( af_latin_script_class )
/* constants are given with units_per_em == 2048 in mind */
#define AF_LATIN_CONSTANT( metrics, c ) \
( ( (c) * (FT_Long)( (AF_LatinMetrics)(metrics) )->units_per_em ) / 2048 )
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N G L O B A L M E T R I C S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*
* The following declarations could be embedded in the file `aflatin.c';
* they have been made semi-public to allow alternate script hinters to
* re-use some of them.
*/
/* Latin (global) metrics management */
enum
{
AF_LATIN_BLUE_CAPITAL_TOP,
AF_LATIN_BLUE_CAPITAL_BOTTOM,
AF_LATIN_BLUE_SMALL_F_TOP,
AF_LATIN_BLUE_SMALL_TOP,
AF_LATIN_BLUE_SMALL_BOTTOM,
AF_LATIN_BLUE_SMALL_MINOR,
AF_LATIN_BLUE_MAX
};
#define AF_LATIN_IS_TOP_BLUE( b ) ( (b) == AF_LATIN_BLUE_CAPITAL_TOP || \
(b) == AF_LATIN_BLUE_SMALL_F_TOP || \
(b) == AF_LATIN_BLUE_SMALL_TOP )
#define AF_LATIN_MAX_WIDTHS 16
#define AF_LATIN_MAX_BLUES AF_LATIN_BLUE_MAX
enum
{
/* set if zone height is <= 3/4px */
AF_LATIN_BLUE_ACTIVE = 1 << 0,
/* result of AF_LATIN_IS_TOP_BLUE */
AF_LATIN_BLUE_TOP = 1 << 1,
/* used for scale adjustment */
AF_LATIN_BLUE_ADJUSTMENT = 1 << 2,
/* optimization */
AF_LATIN_BLUE_FLAG_MAX
};
typedef struct AF_LatinBlueRec_
{
AF_WidthRec ref;
AF_WidthRec shoot;
FT_UInt flags;
} AF_LatinBlueRec, *AF_LatinBlue;
typedef struct AF_LatinAxisRec_
{
FT_Fixed scale;
FT_Pos delta;
/* number of used widths */
FT_UInt width_count;
/* widths array */
AF_WidthRec widths[AF_LATIN_MAX_WIDTHS];
/* used for creating edges */
FT_Pos edge_distance_threshold;
/* the default stem thickness */
FT_Pos standard_width;
/* is standard width very light? */
FT_Bool extra_light;
/* ignored for horizontal metrics */
FT_UInt blue_count;
AF_LatinBlueRec blues[AF_LATIN_BLUE_MAX];
FT_Fixed org_scale;
FT_Pos org_delta;
} AF_LatinAxisRec, *AF_LatinAxis;
typedef struct AF_LatinMetricsRec_
{
AF_ScriptMetricsRec root;
FT_UInt units_per_em;
AF_LatinAxisRec axis[AF_DIMENSION_MAX];
} AF_LatinMetricsRec, *AF_LatinMetrics;
FT_LOCAL( FT_Error )
af_latin_metrics_init( AF_LatinMetrics metrics,
FT_Face face );
FT_LOCAL( void )
af_latin_metrics_scale( AF_LatinMetrics metrics,
AF_Scaler scaler );
FT_LOCAL( void )
af_latin_metrics_init_widths( AF_LatinMetrics metrics,
FT_Face face );
FT_LOCAL( void )
af_latin_metrics_check_digits( AF_LatinMetrics metrics,
FT_Face face );
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N G L Y P H A N A L Y S I S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
enum
{
/* enable stem width snapping */
AF_LATIN_HINTS_HORZ_SNAP = 1 << 0,
/* enable stem height snapping */
AF_LATIN_HINTS_VERT_SNAP = 1 << 1,
/* enable stem width/height */
AF_LATIN_HINTS_STEM_ADJUST = 1 << 2,
/* adjustment */
/* indicate monochrome */
AF_LATIN_HINTS_MONO = 1 << 3
/* rendering */
};
#define AF_LATIN_HINTS_DO_HORZ_SNAP( h ) \
AF_HINTS_TEST_OTHER( h, AF_LATIN_HINTS_HORZ_SNAP )
#define AF_LATIN_HINTS_DO_VERT_SNAP( h ) \
AF_HINTS_TEST_OTHER( h, AF_LATIN_HINTS_VERT_SNAP )
#define AF_LATIN_HINTS_DO_STEM_ADJUST( h ) \
AF_HINTS_TEST_OTHER( h, AF_LATIN_HINTS_STEM_ADJUST )
#define AF_LATIN_HINTS_DO_MONO( h ) \
AF_HINTS_TEST_OTHER( h, AF_LATIN_HINTS_MONO )
/*
* The next functions shouldn't normally be exported. However, other
* scripts might like to use these functions as-is.
*/
FT_LOCAL( FT_Error )
af_latin_hints_compute_segments( AF_GlyphHints hints,
AF_Dimension dim );
FT_LOCAL( void )
af_latin_hints_link_segments( AF_GlyphHints hints,
AF_Dimension dim );
FT_LOCAL( FT_Error )
af_latin_hints_compute_edges( AF_GlyphHints hints,
AF_Dimension dim );
FT_LOCAL( FT_Error )
af_latin_hints_detect_features( AF_GlyphHints hints,
AF_Dimension dim );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* afcjk.h */
/* */
/* Auto-fitter hinting routines for CJK script (specification). */
/* */
/* Copyright 2006, 2007, 2011, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFCJK_H__
FT_BEGIN_HEADER
/* the CJK-specific script class */
AF_DECLARE_SCRIPT_CLASS( af_cjk_script_class )
/* CJK (global) metrics management */
/*
* CJK glyphs tend to fill the square. So we have both vertical and
* horizontal blue zones. But some glyphs have flat bounding strokes that
* leave some space between neighbour glyphs.
*/
enum
{
AF_CJK_BLUE_TOP,
AF_CJK_BLUE_BOTTOM,
AF_CJK_BLUE_LEFT,
AF_CJK_BLUE_RIGHT,
AF_CJK_BLUE_MAX
};
#define AF_CJK_MAX_WIDTHS 16
#define AF_CJK_MAX_BLUES AF_CJK_BLUE_MAX
enum
{
AF_CJK_BLUE_ACTIVE = 1 << 0,
AF_CJK_BLUE_IS_TOP = 1 << 1,
AF_CJK_BLUE_IS_RIGHT = 1 << 2,
/* used for scale adjustment */
AF_CJK_BLUE_ADJUSTMENT = 1 << 3,
/* optimization */
AF_CJK_BLUE_FLAG_MAX
};
typedef struct AF_CJKBlueRec_
{
AF_WidthRec ref;
/* undershoot */
AF_WidthRec shoot;
FT_UInt flags;
} AF_CJKBlueRec, *AF_CJKBlue;
typedef struct AF_CJKAxisRec_
{
FT_Fixed scale;
FT_Pos delta;
FT_UInt width_count;
AF_WidthRec widths[AF_CJK_MAX_WIDTHS];
FT_Pos edge_distance_threshold;
FT_Pos standard_width;
FT_Bool extra_light;
/* used for horizontal metrics too for CJK */
FT_Bool control_overshoot;
FT_UInt blue_count;
AF_CJKBlueRec blues[AF_CJK_BLUE_MAX];
FT_Fixed org_scale;
FT_Pos org_delta;
} AF_CJKAxisRec, *AF_CJKAxis;
typedef struct AF_CJKMetricsRec_
{
AF_ScriptMetricsRec root;
FT_UInt units_per_em;
AF_CJKAxisRec axis[AF_DIMENSION_MAX];
} AF_CJKMetricsRec, *AF_CJKMetrics;
FT_LOCAL( FT_Error )
af_cjk_metrics_init( AF_CJKMetrics metrics,
FT_Face face );
FT_LOCAL( void )
af_cjk_metrics_scale( AF_CJKMetrics metrics,
AF_Scaler scaler );
FT_LOCAL( FT_Error )
af_cjk_hints_init( AF_GlyphHints hints,
AF_CJKMetrics metrics );
FT_LOCAL( FT_Error )
af_cjk_hints_apply( AF_GlyphHints hints,
FT_Outline* outline,
AF_CJKMetrics metrics );
/* shared; called from afindic.c */
FT_LOCAL( void )
af_cjk_metrics_check_digits( AF_CJKMetrics metrics,
FT_Face face );
FT_LOCAL( void )
af_cjk_metrics_init_widths( AF_CJKMetrics metrics,
FT_Face face );
/* */
FT_END_HEADER
/* END */
/***************************************************************************/
/* */
/* afindic.h */
/* */
/* Auto-fitter hinting routines for Indic scripts (specification). */
/* */
/* Copyright 2007, 2012 by */
/* Rahul Bhalerao <rahul.bhalerao@redhat.com>, <b.rahul.pm@gmail.com>. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFINDIC_H__
FT_BEGIN_HEADER
/* the Indic-specific script class */
AF_DECLARE_SCRIPT_CLASS( af_indic_script_class )
/* */
FT_END_HEADER
/* END */
#ifdef FT_OPTION_AUTOFIT2
/***************************************************************************/
/* */
/* aflatin2.h */
/* */
/* Auto-fitter hinting routines for latin script (specification). */
/* */
/* Copyright 2003-2007, 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __AFLATIN2_H__
FT_BEGIN_HEADER
/* the latin-specific script class */
AF_DECLARE_SCRIPT_CLASS( af_latin2_script_class )
/* */
FT_END_HEADER
/* END */
#endif
/* when updating this table, don't forget to update */
/* AF_SCRIPT_CLASSES_COUNT and autofit_module_class_pic_init */
/* populate this list when you add new scripts */
static AF_ScriptClass const af_script_classes[] =
{
&af_dummy_script_class,
#ifdef FT_OPTION_AUTOFIT2
&af_latin2_script_class,
#endif
&af_latin_script_class,
&af_cjk_script_class,
&af_indic_script_class,
/* do not remove */
NULL
};
/* Compute the script index of each glyph within a given face. */
static FT_Error
af_face_globals_compute_script_coverage( AF_FaceGlobals globals )
{
FT_Error error = AF_Err_Ok;
FT_Face face = globals->face;
FT_CharMap old_charmap = face->charmap;
FT_Byte* gscripts = globals->glyph_scripts;
FT_UInt ss;
FT_UInt i;
/* the value AF_SCRIPT_NONE means `uncovered glyph' */
FT_MEM_SET( globals->glyph_scripts,
AF_SCRIPT_NONE,
globals->glyph_count );
error = FT_Select_Charmap( face, FT_ENCODING_UNICODE );
if ( error )
{
/*
* Ignore this error; we simply use the fallback script.
* XXX: Shouldn't we rather disable hinting?
*/
error = AF_Err_Ok;
goto Exit;
}
/* scan each script in a Unicode charmap */
for ( ss = 0; AF_SCRIPT_CLASSES_GET[ss]; ss++ )
{
AF_ScriptClass clazz = AF_SCRIPT_CLASSES_GET[ss];
AF_Script_UniRange range;
if ( clazz->script_uni_ranges == NULL )
continue;
/*
* Scan all Unicode points in the range and set the corresponding
* glyph script index.
*/
for ( range = clazz->script_uni_ranges; range->first != 0; range++ )
{
FT_ULong charcode = range->first;
FT_UInt gindex;
gindex = FT_Get_Char_Index( face, charcode );
if ( gindex != 0 &&
gindex < (FT_ULong)globals->glyph_count &&
gscripts[gindex] == AF_SCRIPT_NONE )
gscripts[gindex] = (FT_Byte)ss;
for (;;)
{
charcode = FT_Get_Next_Char( face, charcode, &gindex );
if ( gindex == 0 || charcode > range->last )
break;
if ( gindex < (FT_ULong)globals->glyph_count &&
gscripts[gindex] == AF_SCRIPT_NONE )
gscripts[gindex] = (FT_Byte)ss;
}
}
}
/* mark ASCII digits */
for ( i = 0x30; i <= 0x39; i++ )
{
FT_UInt gindex = FT_Get_Char_Index( face, i );
if ( gindex != 0 && gindex < (FT_ULong)globals->glyph_count )
gscripts[gindex] |= AF_DIGIT;
}
Exit:
/*
* By default, all uncovered glyphs are set to the fallback script.
* XXX: Shouldn't we disable hinting or do something similar?
*/
if ( globals->module->fallback_script != AF_SCRIPT_NONE )
{
FT_Long nn;
for ( nn = 0; nn < globals->glyph_count; nn++ )
{
if ( ( gscripts[nn] & ~AF_DIGIT ) == AF_SCRIPT_NONE )
{
gscripts[nn] &= ~AF_SCRIPT_NONE;
gscripts[nn] |= globals->module->fallback_script;
}
}
}
FT_Set_Charmap( face, old_charmap );
return error;
}
FT_LOCAL_DEF( FT_Error )
af_face_globals_new( FT_Face face,
AF_FaceGlobals *aglobals,
AF_Module module )
{
FT_Error error;
FT_Memory memory;
AF_FaceGlobals globals = NULL;
memory = face->memory;
if ( FT_ALLOC( globals, sizeof ( *globals ) +
face->num_glyphs * sizeof ( FT_Byte ) ) )
goto Exit;
globals->face = face;
globals->glyph_count = face->num_glyphs;
globals->glyph_scripts = (FT_Byte*)( globals + 1 );
globals->module = module;
error = af_face_globals_compute_script_coverage( globals );
if ( error )
{
af_face_globals_free( globals );
globals = NULL;
}
globals->increase_x_height = AF_PROP_INCREASE_X_HEIGHT_MAX;
Exit:
*aglobals = globals;
return error;
}
FT_LOCAL_DEF( void )
af_face_globals_free( AF_FaceGlobals globals )
{
if ( globals )
{
FT_Memory memory = globals->face->memory;
FT_UInt nn;
for ( nn = 0; nn < AF_SCRIPT_MAX; nn++ )
{
if ( globals->metrics[nn] )
{
AF_ScriptClass clazz = AF_SCRIPT_CLASSES_GET[nn];
FT_ASSERT( globals->metrics[nn]->clazz == clazz );
if ( clazz->script_metrics_done )
clazz->script_metrics_done( globals->metrics[nn] );
FT_FREE( globals->metrics[nn] );
}
}
globals->glyph_count = 0;
/* no need to free this one! */
globals->glyph_scripts = NULL;
globals->face = NULL;
FT_FREE( globals );
}
}
FT_LOCAL_DEF( FT_Error )
af_face_globals_get_metrics( AF_FaceGlobals globals,
FT_UInt gindex,
FT_UInt options,
AF_ScriptMetrics *ametrics )
{
AF_ScriptMetrics metrics = NULL;
FT_UInt gidx;
AF_ScriptClass clazz;
FT_UInt script = options & 15;
const FT_Offset script_max = sizeof ( AF_SCRIPT_CLASSES_GET ) /
sizeof ( AF_SCRIPT_CLASSES_GET[0] );
FT_Error error = AF_Err_Ok;
if ( gindex >= (FT_ULong)globals->glyph_count )
{
error = AF_Err_Invalid_Argument;
goto Exit;
}
gidx = script;
if ( gidx == 0 || gidx + 1 >= script_max )
gidx = globals->glyph_scripts[gindex] & AF_SCRIPT_NONE;
clazz = AF_SCRIPT_CLASSES_GET[gidx];
if ( script == 0 )
script = clazz->script;
metrics = globals->metrics[clazz->script];
if ( metrics == NULL )
{
/* create the global metrics object if necessary */
FT_Memory memory = globals->face->memory;
if ( FT_ALLOC( metrics, clazz->script_metrics_size ) )
goto Exit;
metrics->clazz = clazz;
metrics->globals = globals;
if ( clazz->script_metrics_init )
{
error = clazz->script_metrics_init( metrics, globals->face );
if ( error )
{
if ( clazz->script_metrics_done )
clazz->script_metrics_done( metrics );
FT_FREE( metrics );
goto Exit;
}
}
globals->metrics[clazz->script] = metrics;
}
Exit:
*ametrics = metrics;
return error;
}
FT_LOCAL_DEF( FT_Bool )
af_face_globals_is_digit( AF_FaceGlobals globals,
FT_UInt gindex )
{
if ( gindex < (FT_ULong)globals->glyph_count )
return (FT_Bool)( globals->glyph_scripts[gindex] & AF_DIGIT );
return (FT_Bool)0;
}
/* END */
/***************************************************************************/
/* */
/* afhints.c */
/* */
/* Auto-fitter hinting routines (body). */
/* */
/* Copyright 2003-2007, 2009-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_afhints
/* Get new segment for given axis. */
FT_LOCAL_DEF( FT_Error )
af_axis_hints_new_segment( AF_AxisHints axis,
FT_Memory memory,
AF_Segment *asegment )
{
FT_Error error = AF_Err_Ok;
AF_Segment segment = NULL;
if ( axis->num_segments >= axis->max_segments )
{
FT_Int old_max = axis->max_segments;
FT_Int new_max = old_max;
FT_Int big_max = (FT_Int)( FT_INT_MAX / sizeof ( *segment ) );
if ( old_max >= big_max )
{
error = AF_Err_Out_Of_Memory;
goto Exit;
}
new_max += ( new_max >> 2 ) + 4;
if ( new_max < old_max || new_max > big_max )
new_max = big_max;
if ( FT_RENEW_ARRAY( axis->segments, old_max, new_max ) )
goto Exit;
axis->max_segments = new_max;
}
segment = axis->segments + axis->num_segments++;
Exit:
*asegment = segment;
return error;
}
/* Get new edge for given axis, direction, and position. */
FT_LOCAL( FT_Error )
af_axis_hints_new_edge( AF_AxisHints axis,
FT_Int fpos,
AF_Direction dir,
FT_Memory memory,
AF_Edge *anedge )
{
FT_Error error = AF_Err_Ok;
AF_Edge edge = NULL;
AF_Edge edges;
if ( axis->num_edges >= axis->max_edges )
{
FT_Int old_max = axis->max_edges;
FT_Int new_max = old_max;
FT_Int big_max = (FT_Int)( FT_INT_MAX / sizeof ( *edge ) );
if ( old_max >= big_max )
{
error = AF_Err_Out_Of_Memory;
goto Exit;
}
new_max += ( new_max >> 2 ) + 4;
if ( new_max < old_max || new_max > big_max )
new_max = big_max;
if ( FT_RENEW_ARRAY( axis->edges, old_max, new_max ) )
goto Exit;
axis->max_edges = new_max;
}
edges = axis->edges;
edge = edges + axis->num_edges;
while ( edge > edges )
{
if ( edge[-1].fpos < fpos )
break;
/* we want the edge with same position and minor direction */
/* to appear before those in the major one in the list */
if ( edge[-1].fpos == fpos && dir == axis->major_dir )
break;
edge[0] = edge[-1];
edge--;
}
axis->num_edges++;
FT_ZERO( edge );
edge->fpos = (FT_Short)fpos;
edge->dir = (FT_Char)dir;
Exit:
*anedge = edge;
return error;
}
/* these empty stubs are only used to link the `ftgrid' test program */
/* if debugging is disabled */
#ifdef __cplusplus
extern "C" {
#endif
void
af_glyph_hints_dump_points( AF_GlyphHints hints )
{
FT_UNUSED( hints );
}
void
af_glyph_hints_dump_segments( AF_GlyphHints hints )
{
FT_UNUSED( hints );
}
FT_Error
af_glyph_hints_get_num_segments( AF_GlyphHints hints,
FT_Int dimension,
FT_Int* num_segments )
{
FT_UNUSED( hints );
FT_UNUSED( dimension );
FT_UNUSED( num_segments );
return 0;
}
FT_Error
af_glyph_hints_get_segment_offset( AF_GlyphHints hints,
FT_Int dimension,
FT_Int idx,
FT_Pos* offset )
{
FT_UNUSED( hints );
FT_UNUSED( dimension );
FT_UNUSED( idx );
FT_UNUSED( offset );
return 0;
}
void
af_glyph_hints_dump_edges( AF_GlyphHints hints )
{
FT_UNUSED( hints );
}
#ifdef __cplusplus
}
#endif
/* Compute the direction value of a given vector. */
FT_LOCAL_DEF( AF_Direction )
af_direction_compute( FT_Pos dx,
FT_Pos dy )
{
/* long and short arm lengths */
FT_Pos ll, ss;
/* candidate direction */
AF_Direction dir;
if ( dy >= dx )
{
if ( dy >= -dx )
{
dir = AF_DIR_UP;
ll = dy;
ss = dx;
}
else
{
dir = AF_DIR_LEFT;
ll = -dx;
ss = dy;
}
}
/* dy < dx */
else
{
if ( dy >= -dx )
{
dir = AF_DIR_RIGHT;
ll = dx;
ss = dy;
}
else
{
dir = AF_DIR_DOWN;
ll = dy;
ss = dx;
}
}
/* return no direction if arm lengths differ too much */
/* (value 14 is heuristic, corresponding to approx. 4.1 degrees) */
ss *= 14;
if ( FT_ABS( ll ) <= FT_ABS( ss ) )
dir = AF_DIR_NONE;
return dir;
}
FT_LOCAL_DEF( void )
af_glyph_hints_init( AF_GlyphHints hints,
FT_Memory memory )
{
FT_ZERO( hints );
hints->memory = memory;
}
FT_LOCAL_DEF( void )
af_glyph_hints_done( AF_GlyphHints hints )
{
FT_Memory memory = hints->memory;
int dim;
if ( !( hints && hints->memory ) )
return;
/*
* note that we don't need to free the segment and edge
* buffers since they are really within the hints->points array
*/
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
AF_AxisHints axis = &hints->axis[dim];
axis->num_segments = 0;
axis->max_segments = 0;
FT_FREE( axis->segments );
axis->num_edges = 0;
axis->max_edges = 0;
FT_FREE( axis->edges );
}
FT_FREE( hints->contours );
hints->max_contours = 0;
hints->num_contours = 0;
FT_FREE( hints->points );
hints->num_points = 0;
hints->max_points = 0;
hints->memory = NULL;
}
/* Reset metrics. */
FT_LOCAL_DEF( void )
af_glyph_hints_rescale( AF_GlyphHints hints,
AF_ScriptMetrics metrics )
{
hints->metrics = metrics;
hints->scaler_flags = metrics->scaler.flags;
}
/* Recompute all AF_Point in AF_GlyphHints from the definitions */
/* in a source outline. */
FT_LOCAL_DEF( FT_Error )
af_glyph_hints_reload( AF_GlyphHints hints,
FT_Outline* outline )
{
FT_Error error = AF_Err_Ok;
AF_Point points;
FT_UInt old_max, new_max;
FT_Fixed x_scale = hints->x_scale;
FT_Fixed y_scale = hints->y_scale;
FT_Pos x_delta = hints->x_delta;
FT_Pos y_delta = hints->y_delta;
FT_Memory memory = hints->memory;
hints->num_points = 0;
hints->num_contours = 0;
hints->axis[0].num_segments = 0;
hints->axis[0].num_edges = 0;
hints->axis[1].num_segments = 0;
hints->axis[1].num_edges = 0;
/* first of all, reallocate the contours array if necessary */
new_max = (FT_UInt)outline->n_contours;
old_max = hints->max_contours;
if ( new_max > old_max )
{
/* round up to a multiple of 4 */
new_max = ( new_max + 3 ) & ~3;
if ( FT_RENEW_ARRAY( hints->contours, old_max, new_max ) )
goto Exit;
hints->max_contours = new_max;
}
/*
* then reallocate the points arrays if necessary --
* note that we reserve two additional point positions, used to
* hint metrics appropriately
*/
new_max = (FT_UInt)( outline->n_points + 2 );
old_max = hints->max_points;
if ( new_max > old_max )
{
/* round up to a multiple of 8 */
new_max = ( new_max + 2 + 7 ) & ~7;
if ( FT_RENEW_ARRAY( hints->points, old_max, new_max ) )
goto Exit;
hints->max_points = new_max;
}
hints->num_points = outline->n_points;
hints->num_contours = outline->n_contours;
/* We can't rely on the value of `FT_Outline.flags' to know the fill */
/* direction used for a glyph, given that some fonts are broken (e.g., */
/* the Arphic ones). We thus recompute it each time we need to. */
/* */
hints->axis[AF_DIMENSION_HORZ].major_dir = AF_DIR_UP;
hints->axis[AF_DIMENSION_VERT].major_dir = AF_DIR_LEFT;
if ( FT_Outline_Get_Orientation( outline ) == FT_ORIENTATION_POSTSCRIPT )
{
hints->axis[AF_DIMENSION_HORZ].major_dir = AF_DIR_DOWN;
hints->axis[AF_DIMENSION_VERT].major_dir = AF_DIR_RIGHT;
}
hints->x_scale = x_scale;
hints->y_scale = y_scale;
hints->x_delta = x_delta;
hints->y_delta = y_delta;
hints->xmin_delta = 0;
hints->xmax_delta = 0;
points = hints->points;
if ( hints->num_points == 0 )
goto Exit;
{
AF_Point point;
AF_Point point_limit = points + hints->num_points;
/* compute coordinates & Bezier flags, next and prev */
{
FT_Vector* vec = outline->points;
char* tag = outline->tags;
AF_Point end = points + outline->contours[0];
AF_Point prev = end;
FT_Int contour_index = 0;
for ( point = points; point < point_limit; point++, vec++, tag++ )
{
point->fx = (FT_Short)vec->x;
point->fy = (FT_Short)vec->y;
point->ox = point->x = FT_MulFix( vec->x, x_scale ) + x_delta;
point->oy = point->y = FT_MulFix( vec->y, y_scale ) + y_delta;
switch ( FT_CURVE_TAG( *tag ) )
{
case FT_CURVE_TAG_CONIC:
point->flags = AF_FLAG_CONIC;
break;
case FT_CURVE_TAG_CUBIC:
point->flags = AF_FLAG_CUBIC;
break;
default:
point->flags = AF_FLAG_NONE;
}
point->prev = prev;
prev->next = point;
prev = point;
if ( point == end )
{
if ( ++contour_index < outline->n_contours )
{
end = points + outline->contours[contour_index];
prev = end;
}
}
}
}
/* set up the contours array */
{
AF_Point* contour = hints->contours;
AF_Point* contour_limit = contour + hints->num_contours;
short* end = outline->contours;
short idx = 0;
for ( ; contour < contour_limit; contour++, end++ )
{
contour[0] = points + idx;
idx = (short)( end[0] + 1 );
}
}
/* compute directions of in & out vectors */
{
AF_Point first = points;
AF_Point prev = NULL;
FT_Pos in_x = 0;
FT_Pos in_y = 0;
AF_Direction in_dir = AF_DIR_NONE;
for ( point = points; point < point_limit; point++ )
{
AF_Point next;
FT_Pos out_x, out_y;
if ( point == first )
{
prev = first->prev;
in_x = first->fx - prev->fx;
in_y = first->fy - prev->fy;
in_dir = af_direction_compute( in_x, in_y );
first = prev + 1;
}
point->in_dir = (FT_Char)in_dir;
next = point->next;
out_x = next->fx - point->fx;
out_y = next->fy - point->fy;
in_dir = af_direction_compute( out_x, out_y );
point->out_dir = (FT_Char)in_dir;
/* check for weak points */
if ( point->flags & AF_FLAG_CONTROL )
{
Is_Weak_Point:
point->flags |= AF_FLAG_WEAK_INTERPOLATION;
}
else if ( point->out_dir == point->in_dir )
{
if ( point->out_dir != AF_DIR_NONE )
goto Is_Weak_Point;
if ( ft_corner_is_flat( in_x, in_y, out_x, out_y ) )
goto Is_Weak_Point;
}
else if ( point->in_dir == -point->out_dir )
goto Is_Weak_Point;
in_x = out_x;
in_y = out_y;
prev = point;
}
}
}
Exit:
return error;
}
/* Store the hinted outline in an FT_Outline structure. */
FT_LOCAL_DEF( void )
af_glyph_hints_save( AF_GlyphHints hints,
FT_Outline* outline )
{
AF_Point point = hints->points;
AF_Point limit = point + hints->num_points;
FT_Vector* vec = outline->points;
char* tag = outline->tags;
for ( ; point < limit; point++, vec++, tag++ )
{
vec->x = point->x;
vec->y = point->y;
if ( point->flags & AF_FLAG_CONIC )
tag[0] = FT_CURVE_TAG_CONIC;
else if ( point->flags & AF_FLAG_CUBIC )
tag[0] = FT_CURVE_TAG_CUBIC;
else
tag[0] = FT_CURVE_TAG_ON;
}
}
/****************************************************************
*
* EDGE POINT GRID-FITTING
*
****************************************************************/
/* Align all points of an edge to the same coordinate value, */
/* either horizontally or vertically. */
FT_LOCAL_DEF( void )
af_glyph_hints_align_edge_points( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = & hints->axis[dim];
AF_Segment segments = axis->segments;
AF_Segment segment_limit = segments + axis->num_segments;
AF_Segment seg;
if ( dim == AF_DIMENSION_HORZ )
{
for ( seg = segments; seg < segment_limit; seg++ )
{
AF_Edge edge = seg->edge;
AF_Point point, first, last;
if ( edge == NULL )
continue;
first = seg->first;
last = seg->last;
point = first;
for (;;)
{
point->x = edge->pos;
point->flags |= AF_FLAG_TOUCH_X;
if ( point == last )
break;
point = point->next;
}
}
}
else
{
for ( seg = segments; seg < segment_limit; seg++ )
{
AF_Edge edge = seg->edge;
AF_Point point, first, last;
if ( edge == NULL )
continue;
first = seg->first;
last = seg->last;
point = first;
for (;;)
{
point->y = edge->pos;
point->flags |= AF_FLAG_TOUCH_Y;
if ( point == last )
break;
point = point->next;
}
}
}
}
/****************************************************************
*
* STRONG POINT INTERPOLATION
*
****************************************************************/
/* Hint the strong points -- this is equivalent to the TrueType `IP' */
/* hinting instruction. */
FT_LOCAL_DEF( void )
af_glyph_hints_align_strong_points( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_Point points = hints->points;
AF_Point point_limit = points + hints->num_points;
AF_AxisHints axis = &hints->axis[dim];
AF_Edge edges = axis->edges;
AF_Edge edge_limit = edges + axis->num_edges;
AF_Flags touch_flag;
if ( dim == AF_DIMENSION_HORZ )
touch_flag = AF_FLAG_TOUCH_X;
else
touch_flag = AF_FLAG_TOUCH_Y;
if ( edges < edge_limit )
{
AF_Point point;
AF_Edge edge;
for ( point = points; point < point_limit; point++ )
{
/* point position */
FT_Pos u, ou, fu;
FT_Pos delta;
if ( point->flags & touch_flag )
continue;
/* if this point is candidate to weak interpolation, we */
/* interpolate it after all strong points have been processed */
if ( ( point->flags & AF_FLAG_WEAK_INTERPOLATION ) &&
!( point->flags & AF_FLAG_INFLECTION ) )
continue;
if ( dim == AF_DIMENSION_VERT )
{
u = point->fy;
ou = point->oy;
}
else
{
u = point->fx;
ou = point->ox;
}
fu = u;
/* is the point before the first edge? */
edge = edges;
delta = edge->fpos - u;
if ( delta >= 0 )
{
u = edge->pos - ( edge->opos - ou );
goto Store_Point;
}
/* is the point after the last edge? */
edge = edge_limit - 1;
delta = u - edge->fpos;
if ( delta >= 0 )
{
u = edge->pos + ( ou - edge->opos );
goto Store_Point;
}
{
FT_PtrDist min, max, mid;
FT_Pos fpos;
/* find enclosing edges */
min = 0;
max = edge_limit - edges;
#if 1
/* for a small number of edges, a linear search is better */
if ( max <= 8 )
{
FT_PtrDist nn;
for ( nn = 0; nn < max; nn++ )
if ( edges[nn].fpos >= u )
break;
if ( edges[nn].fpos == u )
{
u = edges[nn].pos;
goto Store_Point;
}
min = nn;
}
else
#endif
while ( min < max )
{
mid = ( max + min ) >> 1;
edge = edges + mid;
fpos = edge->fpos;
if ( u < fpos )
max = mid;
else if ( u > fpos )
min = mid + 1;
else
{
/* we are on the edge */
u = edge->pos;
goto Store_Point;
}
}
/* point is not on an edge */
{
AF_Edge before = edges + min - 1;
AF_Edge after = edges + min + 0;
/* assert( before && after && before != after ) */
if ( before->scale == 0 )
before->scale = FT_DivFix( after->pos - before->pos,
after->fpos - before->fpos );
u = before->pos + FT_MulFix( fu - before->fpos,
before->scale );
}
}
Store_Point:
/* save the point position */
if ( dim == AF_DIMENSION_HORZ )
point->x = u;
else
point->y = u;
point->flags |= touch_flag;
}
}
}
/****************************************************************
*
* WEAK POINT INTERPOLATION
*
****************************************************************/
/* Shift the original coordinates of all points between `p1' and */
/* `p2' to get hinted coordinates, using the same difference as */
/* given by `ref'. */
static void
af_iup_shift( AF_Point p1,
AF_Point p2,
AF_Point ref )
{
AF_Point p;
FT_Pos delta = ref->u - ref->v;
if ( delta == 0 )
return;
for ( p = p1; p < ref; p++ )
p->u = p->v + delta;
for ( p = ref + 1; p <= p2; p++ )
p->u = p->v + delta;
}
/* Interpolate the original coordinates of all points between `p1' and */
/* `p2' to get hinted coordinates, using `ref1' and `ref2' as the */
/* reference points. The `u' and `v' members are the current and */
/* original coordinate values, respectively. */
/* */
/* Details can be found in the TrueType bytecode specification. */
static void
af_iup_interp( AF_Point p1,
AF_Point p2,
AF_Point ref1,
AF_Point ref2 )
{
AF_Point p;
FT_Pos u;
FT_Pos v1 = ref1->v;
FT_Pos v2 = ref2->v;
FT_Pos d1 = ref1->u - v1;
FT_Pos d2 = ref2->u - v2;
if ( p1 > p2 )
return;
if ( v1 == v2 )
{
for ( p = p1; p <= p2; p++ )
{
u = p->v;
if ( u <= v1 )
u += d1;
else
u += d2;
p->u = u;
}
return;
}
if ( v1 < v2 )
{
for ( p = p1; p <= p2; p++ )
{
u = p->v;
if ( u <= v1 )
u += d1;
else if ( u >= v2 )
u += d2;
else
u = ref1->u + FT_MulDiv( u - v1, ref2->u - ref1->u, v2 - v1 );
p->u = u;
}
}
else
{
for ( p = p1; p <= p2; p++ )
{
u = p->v;
if ( u <= v2 )
u += d2;
else if ( u >= v1 )
u += d1;
else
u = ref1->u + FT_MulDiv( u - v1, ref2->u - ref1->u, v2 - v1 );
p->u = u;
}
}
}
/* Hint the weak points -- this is equivalent to the TrueType `IUP' */
/* hinting instruction. */
FT_LOCAL_DEF( void )
af_glyph_hints_align_weak_points( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_Point points = hints->points;
AF_Point point_limit = points + hints->num_points;
AF_Point* contour = hints->contours;
AF_Point* contour_limit = contour + hints->num_contours;
AF_Flags touch_flag;
AF_Point point;
AF_Point end_point;
AF_Point first_point;
/* PASS 1: Move segment points to edge positions */
if ( dim == AF_DIMENSION_HORZ )
{
touch_flag = AF_FLAG_TOUCH_X;
for ( point = points; point < point_limit; point++ )
{
point->u = point->x;
point->v = point->ox;
}
}
else
{
touch_flag = AF_FLAG_TOUCH_Y;
for ( point = points; point < point_limit; point++ )
{
point->u = point->y;
point->v = point->oy;
}
}
point = points;
for ( ; contour < contour_limit; contour++ )
{
AF_Point first_touched, last_touched;
point = *contour;
end_point = point->prev;
first_point = point;
/* find first touched point */
for (;;)
{
/* no touched point in contour */
if ( point > end_point )
goto NextContour;
if ( point->flags & touch_flag )
break;
point++;
}
first_touched = point;
last_touched = point;
for (;;)
{
FT_ASSERT( point <= end_point &&
( point->flags & touch_flag ) != 0 );
/* skip any touched neighbours */
while ( point < end_point &&
( point[1].flags & touch_flag ) != 0 )
point++;
last_touched = point;
/* find the next touched point, if any */
point++;
for (;;)
{
if ( point > end_point )
goto EndContour;
if ( ( point->flags & touch_flag ) != 0 )
break;
point++;
}
/* interpolate between last_touched and point */
af_iup_interp( last_touched + 1, point - 1,
last_touched, point );
}
EndContour:
/* special case: only one point was touched */
if ( last_touched == first_touched )
af_iup_shift( first_point, end_point, first_touched );
/* interpolate the last part */
else
{
if ( last_touched < end_point )
af_iup_interp( last_touched + 1, end_point,
last_touched, first_touched );
if ( first_touched > points )
af_iup_interp( first_point, first_touched - 1,
last_touched, first_touched );
}
NextContour:
;
}
/* now save the interpolated values back to x/y */
if ( dim == AF_DIMENSION_HORZ )
{
for ( point = points; point < point_limit; point++ )
point->x = point->u;
}
else
{
for ( point = points; point < point_limit; point++ )
point->y = point->u;
}
}
/* END */
/***************************************************************************/
/* */
/* afdummy.c */
/* */
/* Auto-fitter dummy routines to be used if no hinting should be */
/* performed (body). */
/* */
/* Copyright 2003-2005, 2011 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
static FT_Error
af_dummy_hints_init( AF_GlyphHints hints,
AF_ScriptMetrics metrics )
{
af_glyph_hints_rescale( hints,
metrics );
return AF_Err_Ok;
}
static FT_Error
af_dummy_hints_apply( AF_GlyphHints hints,
FT_Outline* outline )
{
FT_UNUSED( hints );
FT_UNUSED( outline );
return AF_Err_Ok;
}
AF_DEFINE_SCRIPT_CLASS( af_dummy_script_class,
AF_SCRIPT_DUMMY,
NULL,
0,
sizeof ( AF_ScriptMetricsRec ),
(AF_Script_InitMetricsFunc) NULL,
(AF_Script_ScaleMetricsFunc)NULL,
(AF_Script_DoneMetricsFunc) NULL,
(AF_Script_InitHintsFunc) af_dummy_hints_init,
(AF_Script_ApplyHintsFunc) af_dummy_hints_apply
)
/* END */
/***************************************************************************/
/* */
/* aflatin.c */
/* */
/* Auto-fitter hinting routines for latin script (body). */
/* */
/* Copyright 2003-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_aflatin
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N G L O B A L M E T R I C S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* Find segments and links, compute all stem widths, and initialize */
/* standard width and height for the glyph with given charcode. */
FT_LOCAL_DEF( void )
af_latin_metrics_init_widths( AF_LatinMetrics metrics,
FT_Face face )
{
/* scan the array of segments in each direction */
AF_GlyphHintsRec hints[1];
FT_TRACE5(( "standard widths computation\n"
"===========================\n\n" ));
af_glyph_hints_init( hints, face->memory );
metrics->axis[AF_DIMENSION_HORZ].width_count = 0;
metrics->axis[AF_DIMENSION_VERT].width_count = 0;
{
FT_Error error;
FT_UInt glyph_index;
int dim;
AF_LatinMetricsRec dummy[1];
AF_Scaler scaler = &dummy->root.scaler;
glyph_index = FT_Get_Char_Index( face,
metrics->root.clazz->standard_char );
if ( glyph_index == 0 )
goto Exit;
FT_TRACE5(( "standard character: 0x%X (glyph index %d)\n",
metrics->root.clazz->standard_char, glyph_index ));
error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE );
if ( error || face->glyph->outline.n_points <= 0 )
goto Exit;
FT_ZERO( dummy );
dummy->units_per_em = metrics->units_per_em;
scaler->x_scale = 0x10000L;
scaler->y_scale = 0x10000L;
scaler->x_delta = 0;
scaler->y_delta = 0;
scaler->face = face;
scaler->render_mode = FT_RENDER_MODE_NORMAL;
scaler->flags = 0;
af_glyph_hints_rescale( hints, (AF_ScriptMetrics)dummy );
error = af_glyph_hints_reload( hints, &face->glyph->outline );
if ( error )
goto Exit;
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
AF_LatinAxis axis = &metrics->axis[dim];
AF_AxisHints axhints = &hints->axis[dim];
AF_Segment seg, limit, link;
FT_UInt num_widths = 0;
error = af_latin_hints_compute_segments( hints,
(AF_Dimension)dim );
if ( error )
goto Exit;
af_latin_hints_link_segments( hints,
(AF_Dimension)dim );
seg = axhints->segments;
limit = seg + axhints->num_segments;
for ( ; seg < limit; seg++ )
{
link = seg->link;
/* we only consider stem segments there! */
if ( link && link->link == seg && link > seg )
{
FT_Pos dist;
dist = seg->pos - link->pos;
if ( dist < 0 )
dist = -dist;
if ( num_widths < AF_LATIN_MAX_WIDTHS )
axis->widths[num_widths++].org = dist;
}
}
/* this also replaces multiple almost identical stem widths */
/* with a single one (the value 100 is heuristic) */
af_sort_and_quantize_widths( &num_widths, axis->widths,
dummy->units_per_em / 100 );
axis->width_count = num_widths;
}
Exit:
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
AF_LatinAxis axis = &metrics->axis[dim];
FT_Pos stdw;
stdw = ( axis->width_count > 0 )
? axis->widths[0].org
: AF_LATIN_CONSTANT( metrics, 50 );
/* let's try 20% of the smallest width */
axis->edge_distance_threshold = stdw / 5;
axis->standard_width = stdw;
axis->extra_light = 0;
}
}
FT_TRACE5(( "\n" ));
af_glyph_hints_done( hints );
}
#define AF_LATIN_MAX_TEST_CHARACTERS 12
static const char af_latin_blue_chars[AF_LATIN_MAX_BLUES]
[AF_LATIN_MAX_TEST_CHARACTERS + 1] =
{
"THEZOCQS",
"HEZLOCUS",
"fijkdbh",
"xzroesc",
"xzroesc",
"pqgjy"
};
/* Find all blue zones. Flat segments give the reference points, */
/* round segments the overshoot positions. */
static void
af_latin_metrics_init_blues( AF_LatinMetrics metrics,
FT_Face face )
{
FT_Pos flats [AF_LATIN_MAX_TEST_CHARACTERS];
FT_Pos rounds[AF_LATIN_MAX_TEST_CHARACTERS];
FT_Int num_flats;
FT_Int num_rounds;
FT_Int bb;
AF_LatinBlue blue;
FT_Error error;
AF_LatinAxis axis = &metrics->axis[AF_DIMENSION_VERT];
FT_Outline outline;
/* we compute the blues simply by loading each character from the */
/* `af_latin_blue_chars[blues]' string, then finding its top-most or */
/* bottom-most points (depending on `AF_IS_TOP_BLUE') */
FT_TRACE5(( "blue zones computation\n"
"======================\n\n" ));
for ( bb = 0; bb < AF_LATIN_BLUE_MAX; bb++ )
{
const char* p = af_latin_blue_chars[bb];
const char* limit = p + AF_LATIN_MAX_TEST_CHARACTERS;
FT_Pos* blue_ref;
FT_Pos* blue_shoot;
FT_TRACE5(( "blue zone %d:\n", bb ));
num_flats = 0;
num_rounds = 0;
for ( ; p < limit && *p; p++ )
{
FT_UInt glyph_index;
/* same as points.y */
FT_Pos best_y;
FT_Int best_point, best_contour_first, best_contour_last;
FT_Vector* points;
FT_Bool round = 0;
/* load the character in the face -- skip unknown or empty ones */
glyph_index = FT_Get_Char_Index( face, (FT_UInt)*p );
if ( glyph_index == 0 )
continue;
error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE );
outline = face->glyph->outline;
if ( error || outline.n_points <= 0 )
continue;
/* now compute min or max point indices and coordinates */
points = outline.points;
best_point = -1;
/* make compiler happy */
best_y = 0;
/* ditto */
best_contour_first = 0;
/* ditto */
best_contour_last = 0;
{
FT_Int nn;
FT_Int first = 0;
FT_Int last = -1;
for ( nn = 0; nn < outline.n_contours; first = last + 1, nn++ )
{
FT_Int old_best_point = best_point;
FT_Int pp;
last = outline.contours[nn];
/* Avoid single-point contours since they are never rasterized. */
/* In some fonts, they correspond to mark attachment points */
/* which are way outside of the glyph's real outline. */
if ( last <= first )
continue;
if ( AF_LATIN_IS_TOP_BLUE( bb ) )
{
for ( pp = first; pp <= last; pp++ )
if ( best_point < 0 || points[pp].y > best_y )
{
best_point = pp;
best_y = points[pp].y;
}
}
else
{
for ( pp = first; pp <= last; pp++ )
if ( best_point < 0 || points[pp].y < best_y )
{
best_point = pp;
best_y = points[pp].y;
}
}
if ( best_point != old_best_point )
{
best_contour_first = first;
best_contour_last = last;
}
}
FT_TRACE5(( " %c %ld", *p, best_y ));
}
/* now check whether the point belongs to a straight or round */
/* segment; we first need to find in which contour the extremum */
/* lies, then inspect its previous and next points */
if ( best_point >= 0 )
{
FT_Pos best_x = points[best_point].x;
FT_Int prev, next;
FT_Int best_on_point_first, best_on_point_last;
FT_Pos dist;
if ( FT_CURVE_TAG( outline.tags[best_point] ) == FT_CURVE_TAG_ON )
{
best_on_point_first = best_point;
best_on_point_last = best_point;
}
else
{
best_on_point_first = -1;
best_on_point_last = -1;
}
/* look for the previous and next points that are not on the */
/* same Y coordinate, then threshold the `closeness'... */
prev = best_point;
next = prev;
do
{
if ( prev > best_contour_first )
prev--;
else
prev = best_contour_last;
dist = FT_ABS( points[prev].y - best_y );
/* accept a small distance or a small angle (both values are */
/* heuristic; value 20 corresponds to approx. 2.9 degrees) */
if ( dist > 5 )
if ( FT_ABS( points[prev].x - best_x ) <= 20 * dist )
break;
if ( FT_CURVE_TAG( outline.tags[prev] ) == FT_CURVE_TAG_ON )
{
best_on_point_first = prev;
if ( best_on_point_last < 0 )
best_on_point_last = prev;
}
} while ( prev != best_point );
do
{
if ( next < best_contour_last )
next++;
else
next = best_contour_first;
dist = FT_ABS( points[next].y - best_y );
if ( dist > 5 )
if ( FT_ABS( points[next].x - best_x ) <= 20 * dist )
break;
if ( FT_CURVE_TAG( outline.tags[next] ) == FT_CURVE_TAG_ON )
{
best_on_point_last = next;
if ( best_on_point_first < 0 )
best_on_point_first = next;
}
} while ( next != best_point );
/* now set the `round' flag depending on the segment's kind */
/* (value 8 is heuristic) */
if ( best_on_point_first >= 0 &&
best_on_point_last >= 0 &&
(FT_UInt)( FT_ABS( points[best_on_point_last].x -
points[best_on_point_first].x ) ) >
metrics->units_per_em / 8 )
round = 0;
else
round = FT_BOOL(
FT_CURVE_TAG( outline.tags[prev] ) != FT_CURVE_TAG_ON ||
FT_CURVE_TAG( outline.tags[next] ) != FT_CURVE_TAG_ON );
FT_TRACE5(( " (%s)\n", round ? "round" : "flat" ));
}
if ( round )
rounds[num_rounds++] = best_y;
else
flats[num_flats++] = best_y;
}
if ( num_flats == 0 && num_rounds == 0 )
{
/*
* we couldn't find a single glyph to compute this blue zone,
* we will simply ignore it then
*/
FT_TRACE5(( " empty\n" ));
continue;
}
/* we have computed the contents of the `rounds' and `flats' tables, */
/* now determine the reference and overshoot position of the blue -- */
/* we simply take the median value after a simple sort */
af_sort_pos( num_rounds, rounds );
af_sort_pos( num_flats, flats );
blue = &axis->blues[axis->blue_count];
blue_ref = &blue->ref.org;
blue_shoot = &blue->shoot.org;
axis->blue_count++;
if ( num_flats == 0 )
{
*blue_ref =
*blue_shoot = rounds[num_rounds / 2];
}
else if ( num_rounds == 0 )
{
*blue_ref =
*blue_shoot = flats[num_flats / 2];
}
else
{
*blue_ref = flats[num_flats / 2];
*blue_shoot = rounds[num_rounds / 2];
}
/* there are sometimes problems: if the overshoot position of top */
/* zones is under its reference position, or the opposite for bottom */
/* zones. We must thus check everything there and correct the errors */
if ( *blue_shoot != *blue_ref )
{
FT_Pos ref = *blue_ref;
FT_Pos shoot = *blue_shoot;
FT_Bool over_ref = FT_BOOL( shoot > ref );
if ( AF_LATIN_IS_TOP_BLUE( bb ) ^ over_ref )
{
*blue_ref =
*blue_shoot = ( shoot + ref ) / 2;
FT_TRACE5(( " [overshoot smaller than reference,"
" taking mean value]\n" ));
}
}
blue->flags = 0;
if ( AF_LATIN_IS_TOP_BLUE( bb ) )
blue->flags |= AF_LATIN_BLUE_TOP;
/*
* The following flag is used later to adjust the y and x scales
* in order to optimize the pixel grid alignment of the top of small
* letters.
*/
if ( bb == AF_LATIN_BLUE_SMALL_TOP )
blue->flags |= AF_LATIN_BLUE_ADJUSTMENT;
FT_TRACE5(( " -> reference = %ld\n"
" overshoot = %ld\n",
*blue_ref, *blue_shoot ));
}
FT_TRACE5(( "\n" ));
return;
}
/* Check whether all ASCII digits have the same advance width. */
FT_LOCAL_DEF( void )
af_latin_metrics_check_digits( AF_LatinMetrics metrics,
FT_Face face )
{
FT_UInt i;
FT_Bool started = 0, same_width = 1;
FT_Fixed advance, old_advance = 0;
/* digit `0' is 0x30 in all supported charmaps */
for ( i = 0x30; i <= 0x39; i++ )
{
FT_UInt glyph_index;
glyph_index = FT_Get_Char_Index( face, i );
if ( glyph_index == 0 )
continue;
if ( FT_Get_Advance( face, glyph_index,
FT_LOAD_NO_SCALE |
FT_LOAD_NO_HINTING |
FT_LOAD_IGNORE_TRANSFORM,
&advance ) )
continue;
if ( started )
{
if ( advance != old_advance )
{
same_width = 0;
break;
}
}
else
{
old_advance = advance;
started = 1;
}
}
metrics->root.digits_have_same_width = same_width;
}
/* Initialize global metrics. */
FT_LOCAL_DEF( FT_Error )
af_latin_metrics_init( AF_LatinMetrics metrics,
FT_Face face )
{
FT_CharMap oldmap = face->charmap;
metrics->units_per_em = face->units_per_EM;
if ( !FT_Select_Charmap( face, FT_ENCODING_UNICODE ) )
{
af_latin_metrics_init_widths( metrics, face );
af_latin_metrics_init_blues( metrics, face );
af_latin_metrics_check_digits( metrics, face );
}
FT_Set_Charmap( face, oldmap );
return AF_Err_Ok;
}
/* Adjust scaling value, then scale and shift widths */
/* and blue zones (if applicable) for given dimension. */
static void
af_latin_metrics_scale_dim( AF_LatinMetrics metrics,
AF_Scaler scaler,
AF_Dimension dim )
{
FT_Fixed scale;
FT_Pos delta;
AF_LatinAxis axis;
FT_UInt nn;
if ( dim == AF_DIMENSION_HORZ )
{
scale = scaler->x_scale;
delta = scaler->x_delta;
}
else
{
scale = scaler->y_scale;
delta = scaler->y_delta;
}
axis = &metrics->axis[dim];
if ( axis->org_scale == scale && axis->org_delta == delta )
return;
axis->org_scale = scale;
axis->org_delta = delta;
/*
* correct X and Y scale to optimize the alignment of the top of small
* letters to the pixel grid
*/
{
AF_LatinAxis Axis = &metrics->axis[AF_DIMENSION_VERT];
AF_LatinBlue blue = NULL;
for ( nn = 0; nn < Axis->blue_count; nn++ )
{
if ( Axis->blues[nn].flags & AF_LATIN_BLUE_ADJUSTMENT )
{
blue = &Axis->blues[nn];
break;
}
}
if ( blue )
{
FT_Pos scaled;
FT_Pos threshold;
FT_Pos fitted;
FT_UInt limit;
FT_UInt ppem;
scaled = FT_MulFix( blue->shoot.org, scaler->y_scale );
ppem = metrics->root.scaler.face->size->metrics.x_ppem;
limit = metrics->root.globals->increase_x_height;
threshold = 40;
/* if the `increase-x-height' property is active, */
/* we round up much more often */
if ( limit &&
ppem <= limit &&
ppem >= AF_PROP_INCREASE_X_HEIGHT_MIN )
threshold = 52;
fitted = ( scaled + threshold ) & ~63;
if ( scaled != fitted )
{
#if 0
if ( dim == AF_DIMENSION_HORZ )
{
if ( fitted < scaled )
/* scale *= 0.98 */
scale -= scale / 50;
}
else
#endif
if ( dim == AF_DIMENSION_VERT )
scale = FT_MulDiv( scale, fitted, scaled );
}
}
}
axis->scale = scale;
axis->delta = delta;
if ( dim == AF_DIMENSION_HORZ )
{
metrics->root.scaler.x_scale = scale;
metrics->root.scaler.x_delta = delta;
}
else
{
metrics->root.scaler.y_scale = scale;
metrics->root.scaler.y_delta = delta;
}
/* scale the widths */
for ( nn = 0; nn < axis->width_count; nn++ )
{
AF_Width width = axis->widths + nn;
width->cur = FT_MulFix( width->org, scale );
width->fit = width->cur;
}
/* an extra-light axis corresponds to a standard width that is */
/* smaller than 5/8 pixels */
axis->extra_light =
(FT_Bool)( FT_MulFix( axis->standard_width, scale ) < 32 + 8 );
if ( dim == AF_DIMENSION_VERT )
{
/* scale the blue zones */
for ( nn = 0; nn < axis->blue_count; nn++ )
{
AF_LatinBlue blue = &axis->blues[nn];
FT_Pos dist;
blue->ref.cur = FT_MulFix( blue->ref.org, scale ) + delta;
blue->ref.fit = blue->ref.cur;
blue->shoot.cur = FT_MulFix( blue->shoot.org, scale ) + delta;
blue->shoot.fit = blue->shoot.cur;
blue->flags &= ~AF_LATIN_BLUE_ACTIVE;
/* a blue zone is only active if it is less than 3/4 pixels tall */
dist = FT_MulFix( blue->ref.org - blue->shoot.org, scale );
if ( dist <= 48 && dist >= -48 )
{
#if 0
FT_Pos delta1;
#endif
FT_Pos delta2;
/* use discrete values for blue zone widths */
#if 0
/* generic, original code */
delta1 = blue->shoot.org - blue->ref.org;
delta2 = delta1;
if ( delta1 < 0 )
delta2 = -delta2;
delta2 = FT_MulFix( delta2, scale );
if ( delta2 < 32 )
delta2 = 0;
else if ( delta2 < 64 )
delta2 = 32 + ( ( ( delta2 - 32 ) + 16 ) & ~31 );
else
delta2 = FT_PIX_ROUND( delta2 );
if ( delta1 < 0 )
delta2 = -delta2;
blue->ref.fit = FT_PIX_ROUND( blue->ref.cur );
blue->shoot.fit = blue->ref.fit + delta2;
#else
/* simplified version due to abs(dist) <= 48 */
delta2 = dist;
if ( dist < 0 )
delta2 = -delta2;
if ( delta2 < 32 )
delta2 = 0;
else if ( delta < 48 )
delta2 = 32;
else
delta2 = 64;
if ( dist < 0 )
delta2 = -delta2;
blue->ref.fit = FT_PIX_ROUND( blue->ref.cur );
blue->shoot.fit = blue->ref.fit - delta2;
#endif
blue->flags |= AF_LATIN_BLUE_ACTIVE;
}
}
}
}
/* Scale global values in both directions. */
FT_LOCAL_DEF( void )
af_latin_metrics_scale( AF_LatinMetrics metrics,
AF_Scaler scaler )
{
metrics->root.scaler.render_mode = scaler->render_mode;
metrics->root.scaler.face = scaler->face;
metrics->root.scaler.flags = scaler->flags;
af_latin_metrics_scale_dim( metrics, scaler, AF_DIMENSION_HORZ );
af_latin_metrics_scale_dim( metrics, scaler, AF_DIMENSION_VERT );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N G L Y P H A N A L Y S I S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* Walk over all contours and compute its segments. */
FT_LOCAL_DEF( FT_Error )
af_latin_hints_compute_segments( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
FT_Memory memory = hints->memory;
FT_Error error = AF_Err_Ok;
AF_Segment segment = NULL;
AF_SegmentRec seg0;
AF_Point* contour = hints->contours;
AF_Point* contour_limit = contour + hints->num_contours;
AF_Direction major_dir, segment_dir;
FT_ZERO( &seg0 );
seg0.score = 32000;
seg0.flags = AF_EDGE_NORMAL;
major_dir = (AF_Direction)FT_ABS( axis->major_dir );
segment_dir = major_dir;
axis->num_segments = 0;
/* set up (u,v) in each point */
if ( dim == AF_DIMENSION_HORZ )
{
AF_Point point = hints->points;
AF_Point limit = point + hints->num_points;
for ( ; point < limit; point++ )
{
point->u = point->fx;
point->v = point->fy;
}
}
else
{
AF_Point point = hints->points;
AF_Point limit = point + hints->num_points;
for ( ; point < limit; point++ )
{
point->u = point->fy;
point->v = point->fx;
}
}
/* do each contour separately */
for ( ; contour < contour_limit; contour++ )
{
AF_Point point = contour[0];
AF_Point last = point->prev;
int on_edge = 0;
/* minimum segment pos != min_coord */
FT_Pos min_pos = 32000;
/* maximum segment pos != max_coord */
FT_Pos max_pos = -32000;
FT_Bool passed;
/* skip singletons -- just in case */
if ( point == last )
continue;
if ( FT_ABS( last->out_dir ) == major_dir &&
FT_ABS( point->out_dir ) == major_dir )
{
/* we are already on an edge, try to locate its start */
last = point;
for (;;)
{
point = point->prev;
if ( FT_ABS( point->out_dir ) != major_dir )
{
point = point->next;
break;
}
if ( point == last )
break;
}
}
last = point;
passed = 0;
for (;;)
{
FT_Pos u, v;
if ( on_edge )
{
u = point->u;
if ( u < min_pos )
min_pos = u;
if ( u > max_pos )
max_pos = u;
if ( point->out_dir != segment_dir || point == last )
{
/* we are just leaving an edge; record a new segment! */
segment->last = point;
segment->pos = (FT_Short)( ( min_pos + max_pos ) >> 1 );
/* a segment is round if either its first or last point */
/* is a control point */
if ( ( segment->first->flags | point->flags ) &
AF_FLAG_CONTROL )
segment->flags |= AF_EDGE_ROUND;
/* compute segment size */
min_pos = max_pos = point->v;
v = segment->first->v;
if ( v < min_pos )
min_pos = v;
if ( v > max_pos )
max_pos = v;
segment->min_coord = (FT_Short)min_pos;
segment->max_coord = (FT_Short)max_pos;
segment->height = (FT_Short)( segment->max_coord -
segment->min_coord );
on_edge = 0;
segment = NULL;
/* fall through */
}
}
/* now exit if we are at the start/end point */
if ( point == last )
{
if ( passed )
break;
passed = 1;
}
if ( !on_edge && FT_ABS( point->out_dir ) == major_dir )
{
/* this is the start of a new segment! */
segment_dir = (AF_Direction)point->out_dir;
/* clear all segment fields */
error = af_axis_hints_new_segment( axis, memory, &segment );
if ( error )
goto Exit;
segment[0] = seg0;
segment->dir = (FT_Char)segment_dir;
min_pos = max_pos = point->u;
segment->first = point;
segment->last = point;
on_edge = 1;
}
point = point->next;
}
/* contours */
}
/* now slightly increase the height of segments if this makes */
/* sense -- this is used to better detect and ignore serifs */
{
AF_Segment segments = axis->segments;
AF_Segment segments_end = segments + axis->num_segments;
for ( segment = segments; segment < segments_end; segment++ )
{
AF_Point first = segment->first;
AF_Point last = segment->last;
FT_Pos first_v = first->v;
FT_Pos last_v = last->v;
if ( first == last )
continue;
if ( first_v < last_v )
{
AF_Point p;
p = first->prev;
if ( p->v < first_v )
segment->height = (FT_Short)( segment->height +
( ( first_v - p->v ) >> 1 ) );
p = last->next;
if ( p->v > last_v )
segment->height = (FT_Short)( segment->height +
( ( p->v - last_v ) >> 1 ) );
}
else
{
AF_Point p;
p = first->prev;
if ( p->v > first_v )
segment->height = (FT_Short)( segment->height +
( ( p->v - first_v ) >> 1 ) );
p = last->next;
if ( p->v < last_v )
segment->height = (FT_Short)( segment->height +
( ( last_v - p->v ) >> 1 ) );
}
}
}
Exit:
return error;
}
/* Link segments to form stems and serifs. */
FT_LOCAL_DEF( void )
af_latin_hints_link_segments( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
AF_Segment segments = axis->segments;
AF_Segment segment_limit = segments + axis->num_segments;
FT_Pos len_threshold, len_score;
AF_Segment seg1, seg2;
len_threshold = AF_LATIN_CONSTANT( hints->metrics, 8 );
if ( len_threshold == 0 )
len_threshold = 1;
len_score = AF_LATIN_CONSTANT( hints->metrics, 6000 );
/* now compare each segment to the others */
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
/* the fake segments are introduced to hint the metrics -- */
/* we must never link them to anything */
if ( seg1->dir != axis->major_dir || seg1->first == seg1->last )
continue;
/* search for stems having opposite directions, */
/* with seg1 to the `left' of seg2 */
for ( seg2 = segments; seg2 < segment_limit; seg2++ )
{
FT_Pos pos1 = seg1->pos;
FT_Pos pos2 = seg2->pos;
if ( seg1->dir + seg2->dir == 0 && pos2 > pos1 )
{
/* compute distance between the two segments */
FT_Pos dist = pos2 - pos1;
FT_Pos min = seg1->min_coord;
FT_Pos max = seg1->max_coord;
FT_Pos len, score;
if ( min < seg2->min_coord )
min = seg2->min_coord;
if ( max > seg2->max_coord )
max = seg2->max_coord;
/* compute maximum coordinate difference of the two segments */
len = max - min;
if ( len >= len_threshold )
{
/* small coordinate differences cause a higher score, and */
/* segments with a greater distance cause a higher score also */
score = dist + len_score / len;
/* and we search for the smallest score */
/* of the sum of the two values */
if ( score < seg1->score )
{
seg1->score = score;
seg1->link = seg2;
}
if ( score < seg2->score )
{
seg2->score = score;
seg2->link = seg1;
}
}
}
}
}
/* now compute the `serif' segments, cf. explanations in `afhints.h' */
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
seg2 = seg1->link;
if ( seg2 )
{
if ( seg2->link != seg1 )
{
seg1->link = 0;
seg1->serif = seg2->link;
}
}
}
}
/* Link segments to edges, using feature analysis for selection. */
FT_LOCAL_DEF( FT_Error )
af_latin_hints_compute_edges( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
FT_Error error = AF_Err_Ok;
FT_Memory memory = hints->memory;
AF_LatinAxis laxis = &((AF_LatinMetrics)hints->metrics)->axis[dim];
AF_Segment segments = axis->segments;
AF_Segment segment_limit = segments + axis->num_segments;
AF_Segment seg;
#if 0
AF_Direction up_dir;
#endif
FT_Fixed scale;
FT_Pos edge_distance_threshold;
FT_Pos segment_length_threshold;
axis->num_edges = 0;
scale = ( dim == AF_DIMENSION_HORZ ) ? hints->x_scale
: hints->y_scale;
#if 0
up_dir = ( dim == AF_DIMENSION_HORZ ) ? AF_DIR_UP
: AF_DIR_RIGHT;
#endif
/*
* We ignore all segments that are less than 1 pixel in length
* to avoid many problems with serif fonts. We compute the
* corresponding threshold in font units.
*/
if ( dim == AF_DIMENSION_HORZ )
segment_length_threshold = FT_DivFix( 64, hints->y_scale );
else
segment_length_threshold = 0;
/*********************************************************************/
/* */
/* We begin by generating a sorted table of edges for the current */
/* direction. To do so, we simply scan each segment and try to find */
/* an edge in our table that corresponds to its position. */
/* */
/* If no edge is found, we create and insert a new edge in the */
/* sorted table. Otherwise, we simply add the segment to the edge's */
/* list which gets processed in the second step to compute the */
/* edge's properties. */
/* */
/* Note that the table of edges is sorted along the segment/edge */
/* position. */
/* */
/*********************************************************************/
/* assure that edge distance threshold is at most 0.25px */
edge_distance_threshold = FT_MulFix( laxis->edge_distance_threshold,
scale );
if ( edge_distance_threshold > 64 / 4 )
edge_distance_threshold = 64 / 4;
edge_distance_threshold = FT_DivFix( edge_distance_threshold,
scale );
for ( seg = segments; seg < segment_limit; seg++ )
{
AF_Edge found = NULL;
FT_Int ee;
if ( seg->height < segment_length_threshold )
continue;
/* A special case for serif edges: If they are smaller than */
/* 1.5 pixels we ignore them. */
if ( seg->serif &&
2 * seg->height < 3 * segment_length_threshold )
continue;
/* look for an edge corresponding to the segment */
for ( ee = 0; ee < axis->num_edges; ee++ )
{
AF_Edge edge = axis->edges + ee;
FT_Pos dist;
dist = seg->pos - edge->fpos;
if ( dist < 0 )
dist = -dist;
if ( dist < edge_distance_threshold && edge->dir == seg->dir )
{
found = edge;
break;
}
}
if ( !found )
{
AF_Edge edge;
/* insert a new edge in the list and */
/* sort according to the position */
error = af_axis_hints_new_edge( axis, seg->pos,
(AF_Direction)seg->dir,
memory, &edge );
if ( error )
goto Exit;
/* add the segment to the new edge's list */
FT_ZERO( edge );
edge->first = seg;
edge->last = seg;
edge->dir = seg->dir;
edge->fpos = seg->pos;
edge->opos = FT_MulFix( seg->pos, scale );
edge->pos = edge->opos;
seg->edge_next = seg;
}
else
{
/* if an edge was found, simply add the segment to the edge's */
/* list */
seg->edge_next = found->first;
found->last->edge_next = seg;
found->last = seg;
}
}
/******************************************************************/
/* */
/* Good, we now compute each edge's properties according to the */
/* segments found on its position. Basically, these are */
/* */
/* - the edge's main direction */
/* - stem edge, serif edge or both (which defaults to stem then) */
/* - rounded edge, straight or both (which defaults to straight) */
/* - link for edge */
/* */
/******************************************************************/
/* first of all, set the `edge' field in each segment -- this is */
/* required in order to compute edge links */
/*
* Note that removing this loop and setting the `edge' field of each
* segment directly in the code above slows down execution speed for
* some reasons on platforms like the Sun.
*/
{
AF_Edge edges = axis->edges;
AF_Edge edge_limit = edges + axis->num_edges;
AF_Edge edge;
for ( edge = edges; edge < edge_limit; edge++ )
{
seg = edge->first;
if ( seg )
do
{
seg->edge = edge;
seg = seg->edge_next;
} while ( seg != edge->first );
}
/* now compute each edge properties */
for ( edge = edges; edge < edge_limit; edge++ )
{
/* does it contain round segments? */
FT_Int is_round = 0;
/* does it contain straight segments? */
FT_Int is_straight = 0;
#if 0
/* number of upwards segments */
FT_Pos ups = 0;
/* number of downwards segments */
FT_Pos downs = 0;
#endif
seg = edge->first;
do
{
FT_Bool is_serif;
/* check for roundness of segment */
if ( seg->flags & AF_EDGE_ROUND )
is_round++;
else
is_straight++;
#if 0
/* check for segment direction */
if ( seg->dir == up_dir )
ups += seg->max_coord - seg->min_coord;
else
downs += seg->max_coord - seg->min_coord;
#endif
/* check for links -- if seg->serif is set, then seg->link must */
/* be ignored */
is_serif = (FT_Bool)( seg->serif &&
seg->serif->edge &&
seg->serif->edge != edge );
if ( ( seg->link && seg->link->edge != NULL ) || is_serif )
{
AF_Edge edge2;
AF_Segment seg2;
edge2 = edge->link;
seg2 = seg->link;
if ( is_serif )
{
seg2 = seg->serif;
edge2 = edge->serif;
}
if ( edge2 )
{
FT_Pos edge_delta;
FT_Pos seg_delta;
edge_delta = edge->fpos - edge2->fpos;
if ( edge_delta < 0 )
edge_delta = -edge_delta;
seg_delta = seg->pos - seg2->pos;
if ( seg_delta < 0 )
seg_delta = -seg_delta;
if ( seg_delta < edge_delta )
edge2 = seg2->edge;
}
else
edge2 = seg2->edge;
if ( is_serif )
{
edge->serif = edge2;
edge2->flags |= AF_EDGE_SERIF;
}
else
edge->link = edge2;
}
seg = seg->edge_next;
} while ( seg != edge->first );
/* set the round/straight flags */
edge->flags = AF_EDGE_NORMAL;
if ( is_round > 0 && is_round >= is_straight )
edge->flags |= AF_EDGE_ROUND;
#if 0
/* set the edge's main direction */
edge->dir = AF_DIR_NONE;
if ( ups > downs )
edge->dir = (FT_Char)up_dir;
else if ( ups < downs )
edge->dir = (FT_Char)-up_dir;
else if ( ups == downs )
/* both up and down! */
edge->dir = 0;
#endif
/* get rid of serifs if link is set */
/* XXX: This gets rid of many unpleasant artefacts! */
/* Example: the `c' in cour.pfa at size 13 */
if ( edge->serif && edge->link )
edge->serif = 0;
}
}
Exit:
return error;
}
/* Detect segments and edges for given dimension. */
FT_LOCAL_DEF( FT_Error )
af_latin_hints_detect_features( AF_GlyphHints hints,
AF_Dimension dim )
{
FT_Error error;
error = af_latin_hints_compute_segments( hints, dim );
if ( !error )
{
af_latin_hints_link_segments( hints, dim );
error = af_latin_hints_compute_edges( hints, dim );
}
return error;
}
/* Compute all edges which lie within blue zones. */
FT_LOCAL_DEF( void )
af_latin_hints_compute_blue_edges( AF_GlyphHints hints,
AF_LatinMetrics metrics )
{
AF_AxisHints axis = &hints->axis[AF_DIMENSION_VERT];
AF_Edge edge = axis->edges;
AF_Edge edge_limit = edge + axis->num_edges;
AF_LatinAxis latin = &metrics->axis[AF_DIMENSION_VERT];
FT_Fixed scale = latin->scale;
/* compute which blue zones are active, i.e. have their scaled */
/* size < 3/4 pixels */
/* for each horizontal edge search the blue zone which is closest */
for ( ; edge < edge_limit; edge++ )
{
FT_UInt bb;
AF_Width best_blue = NULL;
/* initial threshold */
FT_Pos best_dist;
/* compute the initial threshold as a fraction of the EM size */
/* (the value 40 is heuristic) */
best_dist = FT_MulFix( metrics->units_per_em / 40, scale );
/* assure a minimum distance of 0.5px */
if ( best_dist > 64 / 2 )
best_dist = 64 / 2;
for ( bb = 0; bb < latin->blue_count; bb++ )
{
AF_LatinBlue blue = latin->blues + bb;
FT_Bool is_top_blue, is_major_dir;
/* skip inactive blue zones (i.e., those that are too large) */
if ( !( blue->flags & AF_LATIN_BLUE_ACTIVE ) )
continue;
/* if it is a top zone, check for right edges -- if it is a bottom */
/* zone, check for left edges */
/* */
/* of course, that's for TrueType */
is_top_blue = (FT_Byte)( ( blue->flags & AF_LATIN_BLUE_TOP ) != 0 );
is_major_dir = FT_BOOL( edge->dir == axis->major_dir );
/* if it is a top zone, the edge must be against the major */
/* direction; if it is a bottom zone, it must be in the major */
/* direction */
if ( is_top_blue ^ is_major_dir )
{
FT_Pos dist;
/* first of all, compare it to the reference position */
dist = edge->fpos - blue->ref.org;
if ( dist < 0 )
dist = -dist;
dist = FT_MulFix( dist, scale );
if ( dist < best_dist )
{
best_dist = dist;
best_blue = &blue->ref;
}
/* now compare it to the overshoot position and check whether */
/* the edge is rounded, and whether the edge is over the */
/* reference position of a top zone, or under the reference */
/* position of a bottom zone */
if ( edge->flags & AF_EDGE_ROUND && dist != 0 )
{
FT_Bool is_under_ref = FT_BOOL( edge->fpos < blue->ref.org );
if ( is_top_blue ^ is_under_ref )
{
dist = edge->fpos - blue->shoot.org;
if ( dist < 0 )
dist = -dist;
dist = FT_MulFix( dist, scale );
if ( dist < best_dist )
{
best_dist = dist;
best_blue = &blue->shoot;
}
}
}
}
}
if ( best_blue )
edge->blue_edge = best_blue;
}
}
/* Initalize hinting engine. */
static FT_Error
af_latin_hints_init( AF_GlyphHints hints,
AF_LatinMetrics metrics )
{
FT_Render_Mode mode;
FT_UInt32 scaler_flags, other_flags;
FT_Face face = metrics->root.scaler.face;
af_glyph_hints_rescale( hints, (AF_ScriptMetrics)metrics );
/*
* correct x_scale and y_scale if needed, since they may have
* been modified by `af_latin_metrics_scale_dim' above
*/
hints->x_scale = metrics->axis[AF_DIMENSION_HORZ].scale;
hints->x_delta = metrics->axis[AF_DIMENSION_HORZ].delta;
hints->y_scale = metrics->axis[AF_DIMENSION_VERT].scale;
hints->y_delta = metrics->axis[AF_DIMENSION_VERT].delta;
/* compute flags depending on render mode, etc. */
mode = metrics->root.scaler.render_mode;
/* #ifdef AF_CONFIG_OPTION_USE_WARPER */
#if 0
if ( mode == FT_RENDER_MODE_LCD || mode == FT_RENDER_MODE_LCD_V )
metrics->root.scaler.render_mode = mode = FT_RENDER_MODE_NORMAL;
#endif
scaler_flags = hints->scaler_flags;
other_flags = 0;
/*
* We snap the width of vertical stems for the monochrome and
* horizontal LCD rendering targets only.
*/
if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD )
other_flags |= AF_LATIN_HINTS_HORZ_SNAP;
/*
* We snap the width of horizontal stems for the monochrome and
* vertical LCD rendering targets only.
*/
if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD_V )
other_flags |= AF_LATIN_HINTS_VERT_SNAP;
/*
* We adjust stems to full pixels only if we don't use the `light' mode.
*/
if ( mode != FT_RENDER_MODE_LIGHT )
other_flags |= AF_LATIN_HINTS_STEM_ADJUST;
if ( mode == FT_RENDER_MODE_MONO )
other_flags |= AF_LATIN_HINTS_MONO;
/*
* In `light' hinting mode we disable horizontal hinting completely.
* We also do it if the face is italic.
*/
if ( mode == FT_RENDER_MODE_LIGHT ||
( face->style_flags & FT_STYLE_FLAG_ITALIC ) != 0 )
scaler_flags |= AF_SCALER_FLAG_NO_HORIZONTAL;
hints->scaler_flags = scaler_flags;
hints->other_flags = other_flags;
return AF_Err_Ok;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N G L Y P H G R I D - F I T T I N G *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* Snap a given width in scaled coordinates to one of the */
/* current standard widths. */
static FT_Pos
af_latin_snap_width( AF_Width widths,
FT_Int count,
FT_Pos width )
{
int n;
FT_Pos best = 64 + 32 + 2;
FT_Pos reference = width;
FT_Pos scaled;
for ( n = 0; n < count; n++ )
{
FT_Pos w;
FT_Pos dist;
w = widths[n].cur;
dist = width - w;
if ( dist < 0 )
dist = -dist;
if ( dist < best )
{
best = dist;
reference = w;
}
}
scaled = FT_PIX_ROUND( reference );
if ( width >= reference )
{
if ( width < scaled + 48 )
width = reference;
}
else
{
if ( width > scaled - 48 )
width = reference;
}
return width;
}
/* Compute the snapped width of a given stem, ignoring very thin ones. */
/* There is a lot of voodoo in this function; changing the hard-coded */
/* parameters influence the whole hinting process. */
static FT_Pos
af_latin_compute_stem_width( AF_GlyphHints hints,
AF_Dimension dim,
FT_Pos width,
AF_Edge_Flags base_flags,
AF_Edge_Flags stem_flags )
{
AF_LatinMetrics metrics = (AF_LatinMetrics) hints->metrics;
AF_LatinAxis axis = & metrics->axis[dim];
FT_Pos dist = width;
FT_Int sign = 0;
FT_Int vertical = ( dim == AF_DIMENSION_VERT );
if ( !AF_LATIN_HINTS_DO_STEM_ADJUST( hints ) ||
axis->extra_light )
return width;
if ( dist < 0 )
{
dist = -width;
sign = 1;
}
if ( ( vertical && !AF_LATIN_HINTS_DO_VERT_SNAP( hints ) ) ||
( !vertical && !AF_LATIN_HINTS_DO_HORZ_SNAP( hints ) ) )
{
/* smooth hinting process: very lightly quantize the stem width */
/* leave the widths of serifs alone */
if ( ( stem_flags & AF_EDGE_SERIF ) &&
vertical &&
( dist < 3 * 64 ) )
goto Done_Width;
else if ( base_flags & AF_EDGE_ROUND )
{
if ( dist < 80 )
dist = 64;
}
else if ( dist < 56 )
dist = 56;
if ( axis->width_count > 0 )
{
FT_Pos delta;
/* compare to standard width */
delta = dist - axis->widths[0].cur;
if ( delta < 0 )
delta = -delta;
if ( delta < 40 )
{
dist = axis->widths[0].cur;
if ( dist < 48 )
dist = 48;
goto Done_Width;
}
if ( dist < 3 * 64 )
{
delta = dist & 63;
dist &= -64;
if ( delta < 10 )
dist += delta;
else if ( delta < 32 )
dist += 10;
else if ( delta < 54 )
dist += 54;
else
dist += delta;
}
else
dist = ( dist + 32 ) & ~63;
}
}
else
{
/* strong hinting process: snap the stem width to integer pixels */
FT_Pos org_dist = dist;
dist = af_latin_snap_width( axis->widths, axis->width_count, dist );
if ( vertical )
{
/* in the case of vertical hinting, always round */
/* the stem heights to integer pixels */
if ( dist >= 64 )
dist = ( dist + 16 ) & ~63;
else
dist = 64;
}
else
{
if ( AF_LATIN_HINTS_DO_MONO( hints ) )
{
/* monochrome horizontal hinting: snap widths to integer pixels */
/* with a different threshold */
if ( dist < 64 )
dist = 64;
else
dist = ( dist + 32 ) & ~63;
}
else
{
/* for horizontal anti-aliased hinting, we adopt a more subtle */
/* approach: we strengthen small stems, round stems whose size */
/* is between 1 and 2 pixels to an integer, otherwise nothing */
if ( dist < 48 )
dist = ( dist + 64 ) >> 1;
else if ( dist < 128 )
{
/* We only round to an integer width if the corresponding */
/* distortion is less than 1/4 pixel. Otherwise this */
/* makes everything worse since the diagonals, which are */
/* not hinted, appear a lot bolder or thinner than the */
/* vertical stems. */
FT_Pos delta;
dist = ( dist + 22 ) & ~63;
delta = dist - org_dist;
if ( delta < 0 )
delta = -delta;
if (delta >= 16)
{
dist = org_dist;
if ( dist < 48 )
dist = ( dist + 64 ) >> 1;
}
}
else
/* round otherwise to prevent color fringes in LCD mode */
dist = ( dist + 32 ) & ~63;
}
}
}
Done_Width:
if ( sign )
dist = -dist;
return dist;
}
/* Align one stem edge relative to the previous stem edge. */
static void
af_latin_align_linked_edge( AF_GlyphHints hints,
AF_Dimension dim,
AF_Edge base_edge,
AF_Edge stem_edge )
{
FT_Pos dist = stem_edge->opos - base_edge->opos;
FT_Pos fitted_width = af_latin_compute_stem_width(
hints, dim, dist,
(AF_Edge_Flags)base_edge->flags,
(AF_Edge_Flags)stem_edge->flags );
stem_edge->pos = base_edge->pos + fitted_width;
FT_TRACE5(( " LINK: edge %d (opos=%.2f) linked to %.2f,"
" dist was %.2f, now %.2f\n",
stem_edge-hints->axis[dim].edges, stem_edge->opos / 64.0,
stem_edge->pos / 64.0, dist / 64.0, fitted_width / 64.0 ));
}
/* Shift the coordinates of the `serif' edge by the same amount */
/* as the corresponding `base' edge has been moved already. */
static void
af_latin_align_serif_edge( AF_GlyphHints hints,
AF_Edge base,
AF_Edge serif )
{
FT_UNUSED( hints );
serif->pos = base->pos + ( serif->opos - base->opos );
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** E D G E H I N T I N G ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* The main grid-fitting routine. */
FT_LOCAL_DEF( void )
af_latin_hint_edges( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
AF_Edge edges = axis->edges;
AF_Edge edge_limit = edges + axis->num_edges;
FT_PtrDist n_edges;
AF_Edge edge;
AF_Edge anchor = NULL;
FT_Int has_serifs = 0;
FT_TRACE5(( "%s edge hinting\n",
dim == AF_DIMENSION_VERT ? "horizontal" : "vertical" ));
/* we begin by aligning all stems relative to the blue zone */
/* if needed -- that's only for horizontal edges */
if ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_BLUES( hints ) )
{
for ( edge = edges; edge < edge_limit; edge++ )
{
AF_Width blue;
/* these edges form the stem to check */
AF_Edge edge1, edge2;
if ( edge->flags & AF_EDGE_DONE )
continue;
blue = edge->blue_edge;
edge1 = NULL;
edge2 = edge->link;
if ( blue )
edge1 = edge;
/* flip edges if the other stem is aligned to a blue zone */
else if ( edge2 && edge2->blue_edge )
{
blue = edge2->blue_edge;
edge1 = edge2;
edge2 = edge;
}
if ( !edge1 )
continue;
edge1->pos = blue->fit;
edge1->flags |= AF_EDGE_DONE;
if ( edge2 && !edge2->blue_edge )
{
af_latin_align_linked_edge( hints, dim, edge1, edge2 );
edge2->flags |= AF_EDGE_DONE;
}
if ( !anchor )
anchor = edge;
}
}
/* now we align all other stem edges, trying to maintain the */
/* relative order of stems in the glyph */
for ( edge = edges; edge < edge_limit; edge++ )
{
AF_Edge edge2;
if ( edge->flags & AF_EDGE_DONE )
continue;
/* skip all non-stem edges */
edge2 = edge->link;
if ( !edge2 )
{
has_serifs++;
continue;
}
/* now align the stem */
/* this should not happen, but it's better to be safe */
if ( edge2->blue_edge )
{
FT_TRACE5(( " ASSERTION FAILED for edge %d\n", edge2-edges ));
af_latin_align_linked_edge( hints, dim, edge2, edge );
edge->flags |= AF_EDGE_DONE;
continue;
}
if ( !anchor )
{
/* if we reach this if clause, no stem has been aligned yet */
FT_Pos org_len, org_center, cur_len;
FT_Pos cur_pos1, error1, error2, u_off, d_off;
org_len = edge2->opos - edge->opos;
cur_len = af_latin_compute_stem_width(
hints, dim, org_len,
(AF_Edge_Flags)edge->flags,
(AF_Edge_Flags)edge2->flags );
/* some voodoo to specially round edges for small stem widths; */
/* the idea is to align the center of a stem, then shifting */
/* the stem edges to suitable positions */
if ( cur_len <= 64 )
{
/* width <= 1px */
u_off = 32;
d_off = 32;
}
else
{
/* 1px < width < 1.5px */
u_off = 38;
d_off = 26;
}
if ( cur_len < 96 )
{
org_center = edge->opos + ( org_len >> 1 );
cur_pos1 = FT_PIX_ROUND( org_center );
error1 = org_center - ( cur_pos1 - u_off );
if ( error1 < 0 )
error1 = -error1;
error2 = org_center - ( cur_pos1 + d_off );
if ( error2 < 0 )
error2 = -error2;
if ( error1 < error2 )
cur_pos1 -= u_off;
else
cur_pos1 += d_off;
edge->pos = cur_pos1 - cur_len / 2;
edge2->pos = edge->pos + cur_len;
}
else
edge->pos = FT_PIX_ROUND( edge->opos );
anchor = edge;
edge->flags |= AF_EDGE_DONE;
FT_TRACE5(( " ANCHOR: edge %d (opos=%.2f) and %d (opos=%.2f)"
" snapped to %.2f and %.2f\n",
edge - edges, edge->opos / 64.0,
edge2 - edges, edge2->opos / 64.0,
edge->pos / 64.0, edge2->pos / 64.0 ));
af_latin_align_linked_edge( hints, dim, edge, edge2 );
}
else
{
FT_Pos org_pos, org_len, org_center, cur_len;
FT_Pos cur_pos1, cur_pos2, delta1, delta2;
org_pos = anchor->pos + ( edge->opos - anchor->opos );
org_len = edge2->opos - edge->opos;
org_center = org_pos + ( org_len >> 1 );
cur_len = af_latin_compute_stem_width(
hints, dim, org_len,
(AF_Edge_Flags)edge->flags,
(AF_Edge_Flags)edge2->flags );
if ( edge2->flags & AF_EDGE_DONE )
{
FT_TRACE5(( " ADJUST: edge %d (pos=%.2f) moved to %.2f\n",
edge - edges, edge->pos / 64.0,
( edge2->pos - cur_len ) / 64.0 ));
edge->pos = edge2->pos - cur_len;
}
else if ( cur_len < 96 )
{
FT_Pos u_off, d_off;
cur_pos1 = FT_PIX_ROUND( org_center );
if (cur_len <= 64 )
{
u_off = 32;
d_off = 32;
}
else
{
u_off = 38;
d_off = 26;
}
delta1 = org_center - ( cur_pos1 - u_off );
if ( delta1 < 0 )
delta1 = -delta1;
delta2 = org_center - ( cur_pos1 + d_off );
if ( delta2 < 0 )
delta2 = -delta2;
if ( delta1 < delta2 )
cur_pos1 -= u_off;
else
cur_pos1 += d_off;
edge->pos = cur_pos1 - cur_len / 2;
edge2->pos = cur_pos1 + cur_len / 2;
FT_TRACE5(( " STEM: edge %d (opos=%.2f) linked to %d (opos=%.2f)"
" snapped to %.2f and %.2f\n",
edge - edges, edge->opos / 64.0,
edge2 - edges, edge2->opos / 64.0,
edge->pos / 64.0, edge2->pos / 64.0 ));
}
else
{
org_pos = anchor->pos + ( edge->opos - anchor->opos );
org_len = edge2->opos - edge->opos;
org_center = org_pos + ( org_len >> 1 );
cur_len = af_latin_compute_stem_width(
hints, dim, org_len,
(AF_Edge_Flags)edge->flags,
(AF_Edge_Flags)edge2->flags );
cur_pos1 = FT_PIX_ROUND( org_pos );
delta1 = cur_pos1 + ( cur_len >> 1 ) - org_center;
if ( delta1 < 0 )
delta1 = -delta1;
cur_pos2 = FT_PIX_ROUND( org_pos + org_len ) - cur_len;
delta2 = cur_pos2 + ( cur_len >> 1 ) - org_center;
if ( delta2 < 0 )
delta2 = -delta2;
edge->pos = ( delta1 < delta2 ) ? cur_pos1 : cur_pos2;
edge2->pos = edge->pos + cur_len;
FT_TRACE5(( " STEM: edge %d (opos=%.2f) linked to %d (opos=%.2f)"
" snapped to %.2f and %.2f\n",
edge - edges, edge->opos / 64.0,
edge2 - edges, edge2->opos / 64.0,
edge->pos / 64.0, edge2->pos / 64.0 ));
}
edge->flags |= AF_EDGE_DONE;
edge2->flags |= AF_EDGE_DONE;
if ( edge > edges && edge->pos < edge[-1].pos )
{
edge->pos = edge[-1].pos;
}
}
}
/* make sure that lowercase m's maintain their symmetry */
/* In general, lowercase m's have six vertical edges if they are sans */
/* serif, or twelve if they are with serifs. This implementation is */
/* based on that assumption, and seems to work very well with most */
/* faces. However, if for a certain face this assumption is not */
/* true, the m is just rendered like before. In addition, any stem */
/* correction will only be applied to symmetrical glyphs (even if the */
/* glyph is not an m), so the potential for unwanted distortion is */
/* relatively low. */
/* We don't handle horizontal edges since we can't easily assure that */
/* the third (lowest) stem aligns with the base line; it might end up */
/* one pixel higher or lower. */
n_edges = edge_limit - edges;
if ( dim == AF_DIMENSION_HORZ && ( n_edges == 6 || n_edges == 12 ) )
{
AF_Edge edge1, edge2, edge3;
FT_Pos dist1, dist2, span, delta;
if ( n_edges == 6 )
{
edge1 = edges;
edge2 = edges + 2;
edge3 = edges + 4;
}
else
{
edge1 = edges + 1;
edge2 = edges + 5;
edge3 = edges + 9;
}
dist1 = edge2->opos - edge1->opos;
dist2 = edge3->opos - edge2->opos;
span = dist1 - dist2;
if ( span < 0 )
span = -span;
if ( span < 8 )
{
delta = edge3->pos - ( 2 * edge2->pos - edge1->pos );
edge3->pos -= delta;
if ( edge3->link )
edge3->link->pos -= delta;
/* move the serifs along with the stem */
if ( n_edges == 12 )
{
( edges + 8 )->pos -= delta;
( edges + 11 )->pos -= delta;
}
edge3->flags |= AF_EDGE_DONE;
if ( edge3->link )
edge3->link->flags |= AF_EDGE_DONE;
}
}
if ( has_serifs || !anchor )
{
/*
* now hint the remaining edges (serifs and single) in order
* to complete our processing
*/
for ( edge = edges; edge < edge_limit; edge++ )
{
FT_Pos delta;
if ( edge->flags & AF_EDGE_DONE )
continue;
delta = 1000;
if ( edge->serif )
{
delta = edge->serif->opos - edge->opos;
if ( delta < 0 )
delta = -delta;
}
if ( delta < 64 + 16 )
{
af_latin_align_serif_edge( hints, edge->serif, edge );
FT_TRACE5(( " SERIF: edge %d (opos=%.2f) serif to %d (opos=%.2f)"
" aligned to %.2f\n",
edge - edges, edge->opos / 64.0,
edge->serif - edges, edge->serif->opos / 64.0,
edge->pos / 64.0 ));
}
else if ( !anchor )
{
edge->pos = FT_PIX_ROUND( edge->opos );
anchor = edge;
FT_TRACE5(( " SERIF_ANCHOR: edge %d (opos=%.2f)"
" snapped to %.2f\n",
edge-edges, edge->opos / 64.0, edge->pos / 64.0 ));
}
else
{
AF_Edge before, after;
for ( before = edge - 1; before >= edges; before-- )
if ( before->flags & AF_EDGE_DONE )
break;
for ( after = edge + 1; after < edge_limit; after++ )
if ( after->flags & AF_EDGE_DONE )
break;
if ( before >= edges && before < edge &&
after < edge_limit && after > edge )
{
if ( after->opos == before->opos )
edge->pos = before->pos;
else
edge->pos = before->pos +
FT_MulDiv( edge->opos - before->opos,
after->pos - before->pos,
after->opos - before->opos );
FT_TRACE5(( " SERIF_LINK1: edge %d (opos=%.2f) snapped to %.2f"
" from %d (opos=%.2f)\n",
edge - edges, edge->opos / 64.0,
edge->pos / 64.0,
before - edges, before->opos / 64.0 ));
}
else
{
edge->pos = anchor->pos +
( ( edge->opos - anchor->opos + 16 ) & ~31 );
FT_TRACE5(( " SERIF_LINK2: edge %d (opos=%.2f)"
" snapped to %.2f\n",
edge - edges, edge->opos / 64.0, edge->pos / 64.0 ));
}
}
edge->flags |= AF_EDGE_DONE;
if ( edge > edges && edge->pos < edge[-1].pos )
{
edge->pos = edge[-1].pos;
}
if ( edge + 1 < edge_limit &&
edge[1].flags & AF_EDGE_DONE &&
edge->pos > edge[1].pos )
{
edge->pos = edge[1].pos;
}
}
}
}
/* Apply the complete hinting algorithm to a latin glyph. */
static FT_Error
af_latin_hints_apply( AF_GlyphHints hints,
FT_Outline* outline,
AF_LatinMetrics metrics )
{
FT_Error error;
int dim;
error = af_glyph_hints_reload( hints, outline );
if ( error )
goto Exit;
/* analyze glyph outline */
if ( AF_HINTS_DO_HORIZONTAL( hints ) )
{
error = af_latin_hints_detect_features( hints, AF_DIMENSION_HORZ );
if ( error )
goto Exit;
}
if ( AF_HINTS_DO_VERTICAL( hints ) )
{
error = af_latin_hints_detect_features( hints, AF_DIMENSION_VERT );
if ( error )
goto Exit;
af_latin_hints_compute_blue_edges( hints, metrics );
}
/* grid-fit the outline */
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
if ( ( dim == AF_DIMENSION_HORZ && AF_HINTS_DO_HORIZONTAL( hints ) ) ||
( dim == AF_DIMENSION_VERT && AF_HINTS_DO_VERTICAL( hints ) ) )
{
af_latin_hint_edges( hints, (AF_Dimension)dim );
af_glyph_hints_align_edge_points( hints, (AF_Dimension)dim );
af_glyph_hints_align_strong_points( hints, (AF_Dimension)dim );
af_glyph_hints_align_weak_points( hints, (AF_Dimension)dim );
}
}
af_glyph_hints_save( hints, outline );
Exit:
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N S C R I P T C L A S S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* XXX: this should probably fine tuned to differentiate better between */
/* scripts... */
static const AF_Script_UniRangeRec af_latin_uniranges[] =
{
/* Basic Latin (no control chars) */
AF_UNIRANGE_REC( 0x0020UL, 0x007FUL ),
/* Latin-1 Supplement (no control chars) */
AF_UNIRANGE_REC( 0x00A0UL, 0x00FFUL ),
/* Latin Extended-A */
AF_UNIRANGE_REC( 0x0100UL, 0x017FUL ),
/* Latin Extended-B */
AF_UNIRANGE_REC( 0x0180UL, 0x024FUL ),
/* IPA Extensions */
AF_UNIRANGE_REC( 0x0250UL, 0x02AFUL ),
/* Spacing Modifier Letters */
AF_UNIRANGE_REC( 0x02B0UL, 0x02FFUL ),
/* Combining Diacritical Marks */
AF_UNIRANGE_REC( 0x0300UL, 0x036FUL ),
/* Greek and Coptic */
AF_UNIRANGE_REC( 0x0370UL, 0x03FFUL ),
/* Cyrillic */
AF_UNIRANGE_REC( 0x0400UL, 0x04FFUL ),
/* Cyrillic Supplement */
AF_UNIRANGE_REC( 0x0500UL, 0x052FUL ),
/* Phonetic Extensions */
AF_UNIRANGE_REC( 0x1D00UL, 0x1D7FUL ),
/* Phonetic Extensions Supplement */
AF_UNIRANGE_REC( 0x1D80UL, 0x1DBFUL ),
/* Combining Diacritical Marks Supplement */
AF_UNIRANGE_REC( 0x1DC0UL, 0x1DFFUL ),
/* Latin Extended Additional */
AF_UNIRANGE_REC( 0x1E00UL, 0x1EFFUL ),
/* Greek Extended */
AF_UNIRANGE_REC( 0x1F00UL, 0x1FFFUL ),
/* General Punctuation */
AF_UNIRANGE_REC( 0x2000UL, 0x206FUL ),
/* Superscripts and Subscripts */
AF_UNIRANGE_REC( 0x2070UL, 0x209FUL ),
/* Currency Symbols */
AF_UNIRANGE_REC( 0x20A0UL, 0x20CFUL ),
/* Number Forms */
AF_UNIRANGE_REC( 0x2150UL, 0x218FUL ),
/* Enclosed Alphanumerics */
AF_UNIRANGE_REC( 0x2460UL, 0x24FFUL ),
/* Latin Extended-C */
AF_UNIRANGE_REC( 0x2C60UL, 0x2C7FUL ),
/* Cyrillic Extended-A */
AF_UNIRANGE_REC( 0x2DE0UL, 0x2DFFUL ),
/* Supplemental Punctuation */
AF_UNIRANGE_REC( 0x2E00UL, 0x2E7FUL ),
/* Cyrillic Extended-B */
AF_UNIRANGE_REC( 0xA640UL, 0xA69FUL ),
/* Latin Extended-D */
AF_UNIRANGE_REC( 0xA720UL, 0xA7FFUL ),
/* Alphab. Present. Forms (Latin Ligs) */
AF_UNIRANGE_REC( 0xFB00UL, 0xFB06UL ),
/* Mathematical Alphanumeric Symbols */
AF_UNIRANGE_REC( 0x1D400UL, 0x1D7FFUL ),
/* Enclosed Alphanumeric Supplement */
AF_UNIRANGE_REC( 0x1F100UL, 0x1F1FFUL ),
AF_UNIRANGE_REC( 0UL, 0UL )
};
AF_DEFINE_SCRIPT_CLASS( af_latin_script_class,
AF_SCRIPT_LATIN,
af_latin_uniranges,
'o',
sizeof ( AF_LatinMetricsRec ),
(AF_Script_InitMetricsFunc) af_latin_metrics_init,
(AF_Script_ScaleMetricsFunc)af_latin_metrics_scale,
(AF_Script_DoneMetricsFunc) NULL,
(AF_Script_InitHintsFunc) af_latin_hints_init,
(AF_Script_ApplyHintsFunc) af_latin_hints_apply
)
/* END */
#ifdef FT_OPTION_AUTOFIT2
/***************************************************************************/
/* */
/* aflatin2.c */
/* */
/* Auto-fitter hinting routines for latin script (body). */
/* */
/* Copyright 2003-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_aflatin2
FT_LOCAL_DEF( FT_Error )
af_latin2_hints_compute_segments( AF_GlyphHints hints,
AF_Dimension dim );
FT_LOCAL_DEF( void )
af_latin2_hints_link_segments( AF_GlyphHints hints,
AF_Dimension dim );
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N G L O B A L M E T R I C S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( void )
af_latin2_metrics_init_widths( AF_LatinMetrics metrics,
FT_Face face )
{
/* scan the array of segments in each direction */
AF_GlyphHintsRec hints[1];
af_glyph_hints_init( hints, face->memory );
metrics->axis[AF_DIMENSION_HORZ].width_count = 0;
metrics->axis[AF_DIMENSION_VERT].width_count = 0;
{
FT_Error error;
FT_UInt glyph_index;
int dim;
AF_LatinMetricsRec dummy[1];
AF_Scaler scaler = &dummy->root.scaler;
glyph_index = FT_Get_Char_Index( face,
metrics->root.clazz->standard_char );
if ( glyph_index == 0 )
goto Exit;
error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE );
if ( error || face->glyph->outline.n_points <= 0 )
goto Exit;
FT_ZERO( dummy );
dummy->units_per_em = metrics->units_per_em;
scaler->x_scale = scaler->y_scale = 0x10000L;
scaler->x_delta = scaler->y_delta = 0;
scaler->face = face;
scaler->render_mode = FT_RENDER_MODE_NORMAL;
scaler->flags = 0;
af_glyph_hints_rescale( hints, (AF_ScriptMetrics)dummy );
error = af_glyph_hints_reload( hints, &face->glyph->outline );
if ( error )
goto Exit;
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
AF_LatinAxis axis = &metrics->axis[dim];
AF_AxisHints axhints = &hints->axis[dim];
AF_Segment seg, limit, link;
FT_UInt num_widths = 0;
error = af_latin2_hints_compute_segments( hints,
(AF_Dimension)dim );
if ( error )
goto Exit;
af_latin2_hints_link_segments( hints,
(AF_Dimension)dim );
seg = axhints->segments;
limit = seg + axhints->num_segments;
for ( ; seg < limit; seg++ )
{
link = seg->link;
/* we only consider stem segments there! */
if ( link && link->link == seg && link > seg )
{
FT_Pos dist;
dist = seg->pos - link->pos;
if ( dist < 0 )
dist = -dist;
if ( num_widths < AF_LATIN_MAX_WIDTHS )
axis->widths[num_widths++].org = dist;
}
}
af_sort_widths( num_widths, axis->widths );
axis->width_count = num_widths;
}
Exit:
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
AF_LatinAxis axis = &metrics->axis[dim];
FT_Pos stdw;
stdw = ( axis->width_count > 0 )
? axis->widths[0].org
: AF_LATIN_CONSTANT( metrics, 50 );
/* let's try 20% of the smallest width */
axis->edge_distance_threshold = stdw / 5;
axis->standard_width = stdw;
axis->extra_light = 0;
}
}
af_glyph_hints_done( hints );
}
#define AF_LATIN_MAX_TEST_CHARACTERS 12
static const char af_latin2_blue_chars[AF_LATIN_MAX_BLUES]
[AF_LATIN_MAX_TEST_CHARACTERS+1] =
{
"THEZOCQS",
"HEZLOCUS",
"fijkdbh",
"xzroesc",
"xzroesc",
"pqgjy"
};
static void
af_latin2_metrics_init_blues( AF_LatinMetrics metrics,
FT_Face face )
{
FT_Pos flats [AF_LATIN_MAX_TEST_CHARACTERS];
FT_Pos rounds[AF_LATIN_MAX_TEST_CHARACTERS];
FT_Int num_flats;
FT_Int num_rounds;
FT_Int bb;
AF_LatinBlue blue;
FT_Error error;
AF_LatinAxis axis = &metrics->axis[AF_DIMENSION_VERT];
FT_GlyphSlot glyph = face->glyph;
/* we compute the blues simply by loading each character from the */
/* 'af_latin2_blue_chars[blues]' string, then compute its top-most or */
/* bottom-most points (depending on `AF_IS_TOP_BLUE') */
FT_TRACE5(( "blue zones computation\n"
"======================\n\n" ));
for ( bb = 0; bb < AF_LATIN_BLUE_MAX; bb++ )
{
const char* p = af_latin2_blue_chars[bb];
const char* limit = p + AF_LATIN_MAX_TEST_CHARACTERS;
FT_Pos* blue_ref;
FT_Pos* blue_shoot;
FT_TRACE5(( "blue zone %d:\n", bb ));
num_flats = 0;
num_rounds = 0;
for ( ; p < limit && *p; p++ )
{
FT_UInt glyph_index;
FT_Int best_point, best_y, best_first, best_last;
FT_Vector* points;
FT_Bool round;
/* load the character in the face -- skip unknown or empty ones */
glyph_index = FT_Get_Char_Index( face, (FT_UInt)*p );
if ( glyph_index == 0 )
continue;
error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE );
if ( error || glyph->outline.n_points <= 0 )
continue;
/* now compute min or max point indices and coordinates */
points = glyph->outline.points;
best_point = -1;
/* make compiler happy */
best_y = 0;
/* ditto */
best_first = 0;
/* ditto */
best_last = 0;
{
FT_Int nn;
FT_Int first = 0;
FT_Int last = -1;
for ( nn = 0; nn < glyph->outline.n_contours; first = last+1, nn++ )
{
FT_Int old_best_point = best_point;
FT_Int pp;
last = glyph->outline.contours[nn];
/* Avoid single-point contours since they are never rasterized. */
/* In some fonts, they correspond to mark attachment points */
/* which are way outside of the glyph's real outline. */
if ( last == first )
continue;
if ( AF_LATIN_IS_TOP_BLUE( bb ) )
{
for ( pp = first; pp <= last; pp++ )
if ( best_point < 0 || points[pp].y > best_y )
{
best_point = pp;
best_y = points[pp].y;
}
}
else
{
for ( pp = first; pp <= last; pp++ )
if ( best_point < 0 || points[pp].y < best_y )
{
best_point = pp;
best_y = points[pp].y;
}
}
if ( best_point != old_best_point )
{
best_first = first;
best_last = last;
}
}
FT_TRACE5(( " %c %d", *p, best_y ));
}
/* now check whether the point belongs to a straight or round */
/* segment; we first need to find in which contour the extremum */
/* lies, then inspect its previous and next points */
{
FT_Pos best_x = points[best_point].x;
FT_Int start, end, prev, next;
FT_Pos dist;
/* now look for the previous and next points that are not on the */
/* same Y coordinate. Threshold the `closeness'... */
start = end = best_point;
do
{
prev = start - 1;
if ( prev < best_first )
prev = best_last;
dist = FT_ABS( points[prev].y - best_y );
/* accept a small distance or a small angle (both values are */
/* heuristic; value 20 corresponds to approx. 2.9 degrees) */
if ( dist > 5 )
if ( FT_ABS( points[prev].x - best_x ) <= 20 * dist )
break;
start = prev;
} while ( start != best_point );
do
{
next = end + 1;
if ( next > best_last )
next = best_first;
dist = FT_ABS( points[next].y - best_y );
if ( dist > 5 )
if ( FT_ABS( points[next].x - best_x ) <= 20 * dist )
break;
end = next;
} while ( end != best_point );
/* now, set the `round' flag depending on the segment's kind */
round = FT_BOOL(
FT_CURVE_TAG( glyph->outline.tags[start] ) != FT_CURVE_TAG_ON ||
FT_CURVE_TAG( glyph->outline.tags[ end ] ) != FT_CURVE_TAG_ON );
FT_TRACE5(( " (%s)\n", round ? "round" : "flat" ));
}
if ( round )
rounds[num_rounds++] = best_y;
else
flats[num_flats++] = best_y;
}
if ( num_flats == 0 && num_rounds == 0 )
{
/*
* we couldn't find a single glyph to compute this blue zone,
* we will simply ignore it then
*/
FT_TRACE5(( " empty\n" ));
continue;
}
/* we have computed the contents of the `rounds' and `flats' tables, */
/* now determine the reference and overshoot position of the blue -- */
/* we simply take the median value after a simple sort */
af_sort_pos( num_rounds, rounds );
af_sort_pos( num_flats, flats );
blue = & axis->blues[axis->blue_count];
blue_ref = & blue->ref.org;
blue_shoot = & blue->shoot.org;
axis->blue_count++;
if ( num_flats == 0 )
{
*blue_ref =
*blue_shoot = rounds[num_rounds / 2];
}
else if ( num_rounds == 0 )
{
*blue_ref =
*blue_shoot = flats[num_flats / 2];
}
else
{
*blue_ref = flats[num_flats / 2];
*blue_shoot = rounds[num_rounds / 2];
}
/* there are sometimes problems: if the overshoot position of top */
/* zones is under its reference position, or the opposite for bottom */
/* zones. We must thus check everything there and correct the errors */
if ( *blue_shoot != *blue_ref )
{
FT_Pos ref = *blue_ref;
FT_Pos shoot = *blue_shoot;
FT_Bool over_ref = FT_BOOL( shoot > ref );
if ( AF_LATIN_IS_TOP_BLUE( bb ) ^ over_ref )
{
*blue_ref =
*blue_shoot = ( shoot + ref ) / 2;
FT_TRACE5(( " [overshoot smaller than reference,"
" taking mean value]\n" ));
}
}
blue->flags = 0;
if ( AF_LATIN_IS_TOP_BLUE( bb ) )
blue->flags |= AF_LATIN_BLUE_TOP;
/*
* The following flags is used later to adjust the y and x scales
* in order to optimize the pixel grid alignment of the top of small
* letters.
*/
if ( bb == AF_LATIN_BLUE_SMALL_TOP )
blue->flags |= AF_LATIN_BLUE_ADJUSTMENT;
FT_TRACE5(( " -> reference = %ld\n"
" overshoot = %ld\n",
*blue_ref, *blue_shoot ));
}
return;
}
FT_LOCAL_DEF( void )
af_latin2_metrics_check_digits( AF_LatinMetrics metrics,
FT_Face face )
{
FT_UInt i;
FT_Bool started = 0, same_width = 1;
FT_Fixed advance, old_advance = 0;
/* check whether all ASCII digits have the same advance width; */
/* digit `0' is 0x30 in all supported charmaps */
for ( i = 0x30; i <= 0x39; i++ )
{
FT_UInt glyph_index;
glyph_index = FT_Get_Char_Index( face, i );
if ( glyph_index == 0 )
continue;
if ( FT_Get_Advance( face, glyph_index,
FT_LOAD_NO_SCALE |
FT_LOAD_NO_HINTING |
FT_LOAD_IGNORE_TRANSFORM,
&advance ) )
continue;
if ( started )
{
if ( advance != old_advance )
{
same_width = 0;
break;
}
}
else
{
old_advance = advance;
started = 1;
}
}
metrics->root.digits_have_same_width = same_width;
}
FT_LOCAL_DEF( FT_Error )
af_latin2_metrics_init( AF_LatinMetrics metrics,
FT_Face face )
{
FT_Error error = AF_Err_Ok;
FT_CharMap oldmap = face->charmap;
FT_UInt ee;
static const FT_Encoding latin_encodings[] =
{
FT_ENCODING_UNICODE,
FT_ENCODING_APPLE_ROMAN,
FT_ENCODING_ADOBE_STANDARD,
FT_ENCODING_ADOBE_LATIN_1,
/* end of list */
FT_ENCODING_NONE
};
metrics->units_per_em = face->units_per_EM;
/* do we have a latin charmap in there? */
for ( ee = 0; latin_encodings[ee] != FT_ENCODING_NONE; ee++ )
{
error = FT_Select_Charmap( face, latin_encodings[ee] );
if ( !error )
break;
}
if ( !error )
{
af_latin2_metrics_init_widths( metrics, face );
af_latin2_metrics_init_blues( metrics, face );
af_latin2_metrics_check_digits( metrics, face );
}
FT_Set_Charmap( face, oldmap );
return AF_Err_Ok;
}
static void
af_latin2_metrics_scale_dim( AF_LatinMetrics metrics,
AF_Scaler scaler,
AF_Dimension dim )
{
FT_Fixed scale;
FT_Pos delta;
AF_LatinAxis axis;
FT_UInt nn;
if ( dim == AF_DIMENSION_HORZ )
{
scale = scaler->x_scale;
delta = scaler->x_delta;
}
else
{
scale = scaler->y_scale;
delta = scaler->y_delta;
}
axis = &metrics->axis[dim];
if ( axis->org_scale == scale && axis->org_delta == delta )
return;
axis->org_scale = scale;
axis->org_delta = delta;
/*
* correct Y scale to optimize the alignment of the top of small
* letters to the pixel grid
*/
if ( dim == AF_DIMENSION_VERT )
{
AF_LatinAxis vaxis = &metrics->axis[AF_DIMENSION_VERT];
AF_LatinBlue blue = NULL;
for ( nn = 0; nn < vaxis->blue_count; nn++ )
{
if ( vaxis->blues[nn].flags & AF_LATIN_BLUE_ADJUSTMENT )
{
blue = &vaxis->blues[nn];
break;
}
}
if ( blue )
{
FT_Pos scaled;
FT_Pos threshold;
FT_Pos fitted;
FT_UInt limit;
FT_UInt ppem;
scaled = FT_MulFix( blue->shoot.org, scaler->y_scale );
ppem = metrics->root.scaler.face->size->metrics.x_ppem;
limit = metrics->root.globals->increase_x_height;
threshold = 40;
/* if the `increase-x-height' property is active, */
/* we round up much more often */
if ( limit &&
ppem <= limit &&
ppem >= AF_PROP_INCREASE_X_HEIGHT_MIN )
threshold = 52;
fitted = ( scaled + threshold ) & ~63;
#if 1
if ( scaled != fitted )
{
scale = FT_MulDiv( scale, fitted, scaled );
FT_TRACE5(( "== scaled x-top = %.2g"
" fitted = %.2g, scaling = %.4g\n",
scaled / 64.0, fitted / 64.0,
( fitted * 1.0 ) / scaled ));
}
#endif
}
}
axis->scale = scale;
axis->delta = delta;
if ( dim == AF_DIMENSION_HORZ )
{
metrics->root.scaler.x_scale = scale;
metrics->root.scaler.x_delta = delta;
}
else
{
metrics->root.scaler.y_scale = scale;
metrics->root.scaler.y_delta = delta;
}
/* scale the standard widths */
for ( nn = 0; nn < axis->width_count; nn++ )
{
AF_Width width = axis->widths + nn;
width->cur = FT_MulFix( width->org, scale );
width->fit = width->cur;
}
/* an extra-light axis corresponds to a standard width that is */
/* smaller than 5/8 pixels */
axis->extra_light =
(FT_Bool)( FT_MulFix( axis->standard_width, scale ) < 32 + 8 );
if ( dim == AF_DIMENSION_VERT )
{
/* scale the blue zones */
for ( nn = 0; nn < axis->blue_count; nn++ )
{
AF_LatinBlue blue = &axis->blues[nn];
FT_Pos dist;
blue->ref.cur = FT_MulFix( blue->ref.org, scale ) + delta;
blue->ref.fit = blue->ref.cur;
blue->shoot.cur = FT_MulFix( blue->shoot.org, scale ) + delta;
blue->shoot.fit = blue->shoot.cur;
blue->flags &= ~AF_LATIN_BLUE_ACTIVE;
/* a blue zone is only active if it is less than 3/4 pixels tall */
dist = FT_MulFix( blue->ref.org - blue->shoot.org, scale );
if ( dist <= 48 && dist >= -48 )
{
FT_Pos delta1, delta2;
delta1 = blue->shoot.org - blue->ref.org;
delta2 = delta1;
if ( delta1 < 0 )
delta2 = -delta2;
delta2 = FT_MulFix( delta2, scale );
if ( delta2 < 32 )
delta2 = 0;
else if ( delta2 < 64 )
delta2 = 32 + ( ( ( delta2 - 32 ) + 16 ) & ~31 );
else
delta2 = FT_PIX_ROUND( delta2 );
if ( delta1 < 0 )
delta2 = -delta2;
blue->ref.fit = FT_PIX_ROUND( blue->ref.cur );
blue->shoot.fit = blue->ref.fit + delta2;
FT_TRACE5(( ">> activating blue zone %d:"
" ref.cur=%.2g ref.fit=%.2g"
" shoot.cur=%.2g shoot.fit=%.2g\n",
nn, blue->ref.cur / 64.0, blue->ref.fit / 64.0,
blue->shoot.cur / 64.0, blue->shoot.fit / 64.0 ));
blue->flags |= AF_LATIN_BLUE_ACTIVE;
}
}
}
}
FT_LOCAL_DEF( void )
af_latin2_metrics_scale( AF_LatinMetrics metrics,
AF_Scaler scaler )
{
metrics->root.scaler.render_mode = scaler->render_mode;
metrics->root.scaler.face = scaler->face;
metrics->root.scaler.flags = scaler->flags;
af_latin2_metrics_scale_dim( metrics, scaler, AF_DIMENSION_HORZ );
af_latin2_metrics_scale_dim( metrics, scaler, AF_DIMENSION_VERT );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N G L Y P H A N A L Y S I S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
#define SORT_SEGMENTS
FT_LOCAL_DEF( FT_Error )
af_latin2_hints_compute_segments( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
FT_Memory memory = hints->memory;
FT_Error error = AF_Err_Ok;
AF_Segment segment = NULL;
AF_SegmentRec seg0;
AF_Point* contour = hints->contours;
AF_Point* contour_limit = contour + hints->num_contours;
AF_Direction major_dir, segment_dir;
FT_ZERO( &seg0 );
seg0.score = 32000;
seg0.flags = AF_EDGE_NORMAL;
major_dir = (AF_Direction)FT_ABS( axis->major_dir );
segment_dir = major_dir;
axis->num_segments = 0;
/* set up (u,v) in each point */
if ( dim == AF_DIMENSION_HORZ )
{
AF_Point point = hints->points;
AF_Point limit = point + hints->num_points;
for ( ; point < limit; point++ )
{
point->u = point->fx;
point->v = point->fy;
}
}
else
{
AF_Point point = hints->points;
AF_Point limit = point + hints->num_points;
for ( ; point < limit; point++ )
{
point->u = point->fy;
point->v = point->fx;
}
}
/* do each contour separately */
for ( ; contour < contour_limit; contour++ )
{
AF_Point point = contour[0];
AF_Point start = point;
AF_Point last = point->prev;
/* skip singletons -- just in case */
if ( point == last )
continue;
/* already on an edge ?, backtrack to find its start */
if ( FT_ABS( point->in_dir ) == major_dir )
{
point = point->prev;
while ( point->in_dir == start->in_dir )
point = point->prev;
}
/* otherwise, find first segment start, if any */
else
{
while ( FT_ABS( point->out_dir ) != major_dir )
{
point = point->next;
if ( point == start )
goto NextContour;
}
}
start = point;
for (;;)
{
AF_Point first;
FT_Pos min_u, min_v, max_u, max_v;
/* we're at the start of a new segment */
FT_ASSERT( FT_ABS( point->out_dir ) == major_dir &&
point->in_dir != point->out_dir );
first = point;
min_u = max_u = point->u;
min_v = max_v = point->v;
point = point->next;
while ( point->out_dir == first->out_dir )
{
point = point->next;
if ( point->u < min_u )
min_u = point->u;
if ( point->u > max_u )
max_u = point->u;
}
if ( point->v < min_v )
min_v = point->v;
if ( point->v > max_v )
max_v = point->v;
/* record new segment */
error = af_axis_hints_new_segment( axis, memory, &segment );
if ( error )
goto Exit;
segment[0] = seg0;
segment->dir = first->out_dir;
segment->first = first;
segment->last = point;
segment->pos = (FT_Short)(( min_u + max_u ) >> 1);
segment->min_coord = (FT_Short) min_v;
segment->max_coord = (FT_Short) max_v;
segment->height = (FT_Short)(max_v - min_v);
/* a segment is round if it doesn't have successive */
/* on-curve points. */
{
AF_Point pt = first;
AF_Point last = point;
AF_Flags f0 = (AF_Flags)(pt->flags & AF_FLAG_CONTROL);
AF_Flags f1;
segment->flags &= ~AF_EDGE_ROUND;
for ( ; pt != last; f0 = f1 )
{
pt = pt->next;
f1 = (AF_Flags)(pt->flags & AF_FLAG_CONTROL);
if ( !f0 && !f1 )
break;
if ( pt == last )
segment->flags |= AF_EDGE_ROUND;
}
}
/* this can happen in the case of a degenerate contour
* e.g. a 2-point vertical contour
*/
if ( point == start )
break;
/* jump to the start of the next segment, if any */
while ( FT_ABS(point->out_dir) != major_dir )
{
point = point->next;
if ( point == start )
goto NextContour;
}
}
NextContour:
;
/* contours */
}
/* now slightly increase the height of segments when this makes */
/* sense -- this is used to better detect and ignore serifs */
{
AF_Segment segments = axis->segments;
AF_Segment segments_end = segments + axis->num_segments;
for ( segment = segments; segment < segments_end; segment++ )
{
AF_Point first = segment->first;
AF_Point last = segment->last;
AF_Point p;
FT_Pos first_v = first->v;
FT_Pos last_v = last->v;
if ( first == last )
continue;
if ( first_v < last_v )
{
p = first->prev;
if ( p->v < first_v )
segment->height = (FT_Short)( segment->height +
( ( first_v - p->v ) >> 1 ) );
p = last->next;
if ( p->v > last_v )
segment->height = (FT_Short)( segment->height +
( ( p->v - last_v ) >> 1 ) );
}
else
{
p = first->prev;
if ( p->v > first_v )
segment->height = (FT_Short)( segment->height +
( ( p->v - first_v ) >> 1 ) );
p = last->next;
if ( p->v < last_v )
segment->height = (FT_Short)( segment->height +
( ( last_v - p->v ) >> 1 ) );
}
}
}
#ifdef AF_SORT_SEGMENTS
/* place all segments with a negative direction to the start
* of the array, used to speed up segment linking later...
*/
{
AF_Segment segments = axis->segments;
FT_UInt count = axis->num_segments;
FT_UInt ii, jj;
for (ii = 0; ii < count; ii++)
{
if ( segments[ii].dir > 0 )
{
for (jj = ii+1; jj < count; jj++)
{
if ( segments[jj].dir < 0 )
{
AF_SegmentRec tmp;
tmp = segments[ii];
segments[ii] = segments[jj];
segments[jj] = tmp;
break;
}
}
if ( jj == count )
break;
}
}
axis->mid_segments = ii;
}
#endif
Exit:
return error;
}
FT_LOCAL_DEF( void )
af_latin2_hints_link_segments( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
AF_Segment segments = axis->segments;
AF_Segment segment_limit = segments + axis->num_segments;
#ifdef AF_SORT_SEGMENTS
AF_Segment segment_mid = segments + axis->mid_segments;
#endif
FT_Pos len_threshold, len_score;
AF_Segment seg1, seg2;
len_threshold = AF_LATIN_CONSTANT( hints->metrics, 8 );
if ( len_threshold == 0 )
len_threshold = 1;
len_score = AF_LATIN_CONSTANT( hints->metrics, 6000 );
#ifdef AF_SORT_SEGMENTS
for ( seg1 = segments; seg1 < segment_mid; seg1++ )
{
if ( seg1->dir != axis->major_dir || seg1->first == seg1->last )
continue;
for ( seg2 = segment_mid; seg2 < segment_limit; seg2++ )
#else
/* now compare each segment to the others */
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
/* the fake segments are introduced to hint the metrics -- */
/* we must never link them to anything */
if ( seg1->dir != axis->major_dir || seg1->first == seg1->last )
continue;
for ( seg2 = segments; seg2 < segment_limit; seg2++ )
if ( seg1->dir + seg2->dir == 0 && seg2->pos > seg1->pos )
#endif
{
FT_Pos pos1 = seg1->pos;
FT_Pos pos2 = seg2->pos;
FT_Pos dist = pos2 - pos1;
if ( dist < 0 )
continue;
{
FT_Pos min = seg1->min_coord;
FT_Pos max = seg1->max_coord;
FT_Pos len, score;
if ( min < seg2->min_coord )
min = seg2->min_coord;
if ( max > seg2->max_coord )
max = seg2->max_coord;
len = max - min;
if ( len >= len_threshold )
{
score = dist + len_score / len;
if ( score < seg1->score )
{
seg1->score = score;
seg1->link = seg2;
}
if ( score < seg2->score )
{
seg2->score = score;
seg2->link = seg1;
}
}
}
}
}
#if 0
}
#endif
/* now, compute the `serif' segments */
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
seg2 = seg1->link;
if ( seg2 )
{
if ( seg2->link != seg1 )
{
seg1->link = 0;
seg1->serif = seg2->link;
}
}
}
}
FT_LOCAL_DEF( FT_Error )
af_latin2_hints_compute_edges( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
FT_Error error = AF_Err_Ok;
FT_Memory memory = hints->memory;
AF_LatinAxis laxis = &((AF_LatinMetrics)hints->metrics)->axis[dim];
AF_Segment segments = axis->segments;
AF_Segment segment_limit = segments + axis->num_segments;
AF_Segment seg;
AF_Direction up_dir;
FT_Fixed scale;
FT_Pos edge_distance_threshold;
FT_Pos segment_length_threshold;
axis->num_edges = 0;
scale = ( dim == AF_DIMENSION_HORZ ) ? hints->x_scale
: hints->y_scale;
up_dir = ( dim == AF_DIMENSION_HORZ ) ? AF_DIR_UP
: AF_DIR_RIGHT;
/*
* We want to ignore very small (mostly serif) segments, we do that
* by ignoring those that whose length is less than a given fraction
* of the standard width. If there is no standard width, we ignore
* those that are less than a given size in pixels
*
* also, unlink serif segments that are linked to segments farther
* than 50% of the standard width
*/
if ( dim == AF_DIMENSION_HORZ )
{
if ( laxis->width_count > 0 )
segment_length_threshold = (laxis->standard_width * 10 ) >> 4;
else
segment_length_threshold = FT_DivFix( 64, hints->y_scale );
}
else
segment_length_threshold = 0;
/*********************************************************************/
/* */
/* We will begin by generating a sorted table of edges for the */
/* current direction. To do so, we simply scan each segment and try */
/* to find an edge in our table that corresponds to its position. */
/* */
/* If no edge is found, we create and insert a new edge in the */
/* sorted table. Otherwise, we simply add the segment to the edge's */
/* list which will be processed in the second step to compute the */
/* edge's properties. */
/* */
/* Note that the edges table is sorted along the segment/edge */
/* position. */
/* */
/*********************************************************************/
edge_distance_threshold = FT_MulFix( laxis->edge_distance_threshold,
scale );
if ( edge_distance_threshold > 64 / 4 )
edge_distance_threshold = 64 / 4;
edge_distance_threshold = FT_DivFix( edge_distance_threshold,
scale );
for ( seg = segments; seg < segment_limit; seg++ )
{
AF_Edge found = 0;
FT_Int ee;
if ( seg->height < segment_length_threshold )
continue;
/* A special case for serif edges: If they are smaller than */
/* 1.5 pixels we ignore them. */
if ( seg->serif )
{
FT_Pos dist = seg->serif->pos - seg->pos;
if (dist < 0)
dist = -dist;
if (dist >= laxis->standard_width >> 1)
{
/* unlink this serif, it is too distant from its reference stem */
seg->serif = NULL;
}
else if ( 2*seg->height < 3 * segment_length_threshold )
continue;
}
/* look for an edge corresponding to the segment */
for ( ee = 0; ee < axis->num_edges; ee++ )
{
AF_Edge edge = axis->edges + ee;
FT_Pos dist;
dist = seg->pos - edge->fpos;
if ( dist < 0 )
dist = -dist;
if ( dist < edge_distance_threshold && edge->dir == seg->dir )
{
found = edge;
break;
}
}
if ( !found )
{
AF_Edge edge;
/* insert a new edge in the list and */
/* sort according to the position */
error = af_axis_hints_new_edge( axis, seg->pos, seg->dir,
memory, &edge );
if ( error )
goto Exit;
/* add the segment to the new edge's list */
FT_ZERO( edge );
edge->first = seg;
edge->last = seg;
edge->fpos = seg->pos;
edge->dir = seg->dir;
edge->opos = edge->pos = FT_MulFix( seg->pos, scale );
seg->edge_next = seg;
}
else
{
/* if an edge was found, simply add the segment to the edge's */
/* list */
seg->edge_next = found->first;
found->last->edge_next = seg;
found->last = seg;
}
}
/*********************************************************************/
/* */
/* Good, we will now compute each edge's properties according to */
/* segments found on its position. Basically, these are: */
/* */
/* - edge's main direction */
/* - stem edge, serif edge or both (which defaults to stem then) */
/* - rounded edge, straight or both (which defaults to straight) */
/* - link for edge */
/* */
/*********************************************************************/
/* first of all, set the `edge' field in each segment -- this is */
/* required in order to compute edge links */
/*
* Note that removing this loop and setting the `edge' field of each
* segment directly in the code above slows down execution speed for
* some reasons on platforms like the Sun.
*/
{
AF_Edge edges = axis->edges;
AF_Edge edge_limit = edges + axis->num_edges;
AF_Edge edge;
for ( edge = edges; edge < edge_limit; edge++ )
{
seg = edge->first;
if ( seg )
do
{
seg->edge = edge;
seg = seg->edge_next;
} while ( seg != edge->first );
}
/* now, compute each edge properties */
for ( edge = edges; edge < edge_limit; edge++ )
{
/* does it contain round segments? */
FT_Int is_round = 0;
/* does it contain straight segments? */
FT_Int is_straight = 0;
#if 0
/* number of upwards segments */
FT_Pos ups = 0;
/* number of downwards segments */
FT_Pos downs = 0;
#endif
seg = edge->first;
do
{
FT_Bool is_serif;
/* check for roundness of segment */
if ( seg->flags & AF_EDGE_ROUND )
is_round++;
else
is_straight++;
#if 0
/* check for segment direction */
if ( seg->dir == up_dir )
ups += seg->max_coord-seg->min_coord;
else
downs += seg->max_coord-seg->min_coord;
#endif
/* check for links -- if seg->serif is set, then seg->link must */
/* be ignored */
is_serif = (FT_Bool)( seg->serif &&
seg->serif->edge &&
seg->serif->edge != edge );
if ( ( seg->link && seg->link->edge != NULL ) || is_serif )
{
AF_Edge edge2;
AF_Segment seg2;
edge2 = edge->link;
seg2 = seg->link;
if ( is_serif )
{
seg2 = seg->serif;
edge2 = edge->serif;
}
if ( edge2 )
{
FT_Pos edge_delta;
FT_Pos seg_delta;
edge_delta = edge->fpos - edge2->fpos;
if ( edge_delta < 0 )
edge_delta = -edge_delta;
seg_delta = seg->pos - seg2->pos;
if ( seg_delta < 0 )
seg_delta = -seg_delta;
if ( seg_delta < edge_delta )
edge2 = seg2->edge;
}
else
edge2 = seg2->edge;
if ( is_serif )
{
edge->serif = edge2;
edge2->flags |= AF_EDGE_SERIF;
}
else
edge->link = edge2;
}
seg = seg->edge_next;
} while ( seg != edge->first );
/* set the round/straight flags */
edge->flags = AF_EDGE_NORMAL;
if ( is_round > 0 && is_round >= is_straight )
edge->flags |= AF_EDGE_ROUND;
#if 0
/* set the edge's main direction */
edge->dir = AF_DIR_NONE;
if ( ups > downs )
edge->dir = (FT_Char)up_dir;
else if ( ups < downs )
edge->dir = (FT_Char)-up_dir;
else if ( ups == downs )
/* both up and down! */
edge->dir = 0;
#endif
/* gets rid of serifs if link is set */
/* XXX: This gets rid of many unpleasant artefacts! */
/* Example: the `c' in cour.pfa at size 13 */
if ( edge->serif && edge->link )
edge->serif = 0;
}
}
Exit:
return error;
}
FT_LOCAL_DEF( FT_Error )
af_latin2_hints_detect_features( AF_GlyphHints hints,
AF_Dimension dim )
{
FT_Error error;
error = af_latin2_hints_compute_segments( hints, dim );
if ( !error )
{
af_latin2_hints_link_segments( hints, dim );
error = af_latin2_hints_compute_edges( hints, dim );
}
return error;
}
FT_LOCAL_DEF( void )
af_latin2_hints_compute_blue_edges( AF_GlyphHints hints,
AF_LatinMetrics metrics )
{
AF_AxisHints axis = &hints->axis[AF_DIMENSION_VERT];
AF_Edge edge = axis->edges;
AF_Edge edge_limit = edge + axis->num_edges;
AF_LatinAxis latin = &metrics->axis[AF_DIMENSION_VERT];
FT_Fixed scale = latin->scale;
/* initial threshold */
FT_Pos best_dist0;
/* compute the initial threshold as a fraction of the EM size */
best_dist0 = FT_MulFix( metrics->units_per_em / 40, scale );
if ( best_dist0 > 64 / 2 )
best_dist0 = 64 / 2;
/* compute which blue zones are active, i.e. have their scaled */
/* size < 3/4 pixels */
/* for each horizontal edge search the blue zone which is closest */
for ( ; edge < edge_limit; edge++ )
{
FT_Int bb;
AF_Width best_blue = NULL;
FT_Pos best_dist = best_dist0;
for ( bb = 0; bb < AF_LATIN_BLUE_MAX; bb++ )
{
AF_LatinBlue blue = latin->blues + bb;
FT_Bool is_top_blue, is_major_dir;
/* skip inactive blue zones (i.e., those that are too small) */
if ( !( blue->flags & AF_LATIN_BLUE_ACTIVE ) )
continue;
/* if it is a top zone, check for right edges -- if it is a bottom */
/* zone, check for left edges */
/* */
/* of course, that's for TrueType */
is_top_blue = (FT_Byte)( ( blue->flags & AF_LATIN_BLUE_TOP ) != 0 );
is_major_dir = FT_BOOL( edge->dir == axis->major_dir );
/* if it is a top zone, the edge must be against the major */
/* direction; if it is a bottom zone, it must be in the major */
/* direction */
if ( is_top_blue ^ is_major_dir )
{
FT_Pos dist;
AF_Width compare;
/* if it's a rounded edge, compare it to the overshoot position */
/* if it's a flat edge, compare it to the reference position */
if ( edge->flags & AF_EDGE_ROUND )
compare = &blue->shoot;
else
compare = &blue->ref;
dist = edge->fpos - compare->org;
if (dist < 0)
dist = -dist;
dist = FT_MulFix( dist, scale );
if ( dist < best_dist )
{
best_dist = dist;
best_blue = compare;
}
#if 0
/* now, compare it to the overshoot position if the edge is */
/* rounded, and if the edge is over the reference position of a */
/* top zone, or under the reference position of a bottom zone */
if ( edge->flags & AF_EDGE_ROUND && dist != 0 )
{
FT_Bool is_under_ref = FT_BOOL( edge->fpos < blue->ref.org );
if ( is_top_blue ^ is_under_ref )
{
blue = latin->blues + bb;
dist = edge->fpos - blue->shoot.org;
if ( dist < 0 )
dist = -dist;
dist = FT_MulFix( dist, scale );
if ( dist < best_dist )
{
best_dist = dist;
best_blue = & blue->shoot;
}
}
}
#endif
}
}
if ( best_blue )
edge->blue_edge = best_blue;
}
}
static FT_Error
af_latin2_hints_init( AF_GlyphHints hints,
AF_LatinMetrics metrics )
{
FT_Render_Mode mode;
FT_UInt32 scaler_flags, other_flags;
FT_Face face = metrics->root.scaler.face;
af_glyph_hints_rescale( hints, (AF_ScriptMetrics)metrics );
/*
* correct x_scale and y_scale if needed, since they may have
* been modified `af_latin2_metrics_scale_dim' above
*/
hints->x_scale = metrics->axis[AF_DIMENSION_HORZ].scale;
hints->x_delta = metrics->axis[AF_DIMENSION_HORZ].delta;
hints->y_scale = metrics->axis[AF_DIMENSION_VERT].scale;
hints->y_delta = metrics->axis[AF_DIMENSION_VERT].delta;
/* compute flags depending on render mode, etc. */
mode = metrics->root.scaler.render_mode;
/* #ifdef AF_CONFIG_OPTION_USE_WARPER */
#if 0
if ( mode == FT_RENDER_MODE_LCD || mode == FT_RENDER_MODE_LCD_V )
{
metrics->root.scaler.render_mode = mode = FT_RENDER_MODE_NORMAL;
}
#endif
scaler_flags = hints->scaler_flags;
other_flags = 0;
/*
* We snap the width of vertical stems for the monochrome and
* horizontal LCD rendering targets only.
*/
if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD )
other_flags |= AF_LATIN_HINTS_HORZ_SNAP;
/*
* We snap the width of horizontal stems for the monochrome and
* vertical LCD rendering targets only.
*/
if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD_V )
other_flags |= AF_LATIN_HINTS_VERT_SNAP;
/*
* We adjust stems to full pixels only if we don't use the `light' mode.
*/
if ( mode != FT_RENDER_MODE_LIGHT )
other_flags |= AF_LATIN_HINTS_STEM_ADJUST;
if ( mode == FT_RENDER_MODE_MONO )
other_flags |= AF_LATIN_HINTS_MONO;
/*
* In `light' hinting mode we disable horizontal hinting completely.
* We also do it if the face is italic.
*/
if ( mode == FT_RENDER_MODE_LIGHT ||
(face->style_flags & FT_STYLE_FLAG_ITALIC) != 0 )
scaler_flags |= AF_SCALER_FLAG_NO_HORIZONTAL;
hints->scaler_flags = scaler_flags;
hints->other_flags = other_flags;
return 0;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N G L Y P H G R I D - F I T T I N G *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* snap a given width in scaled coordinates to one of the */
/* current standard widths */
static FT_Pos
af_latin2_snap_width( AF_Width widths,
FT_Int count,
FT_Pos width )
{
int n;
FT_Pos best = 64 + 32 + 2;
FT_Pos reference = width;
FT_Pos scaled;
for ( n = 0; n < count; n++ )
{
FT_Pos w;
FT_Pos dist;
w = widths[n].cur;
dist = width - w;
if ( dist < 0 )
dist = -dist;
if ( dist < best )
{
best = dist;
reference = w;
}
}
scaled = FT_PIX_ROUND( reference );
if ( width >= reference )
{
if ( width < scaled + 48 )
width = reference;
}
else
{
if ( width > scaled - 48 )
width = reference;
}
return width;
}
/* compute the snapped width of a given stem */
static FT_Pos
af_latin2_compute_stem_width( AF_GlyphHints hints,
AF_Dimension dim,
FT_Pos width,
AF_Edge_Flags base_flags,
AF_Edge_Flags stem_flags )
{
AF_LatinMetrics metrics = (AF_LatinMetrics) hints->metrics;
AF_LatinAxis axis = & metrics->axis[dim];
FT_Pos dist = width;
FT_Int sign = 0;
FT_Int vertical = ( dim == AF_DIMENSION_VERT );
FT_UNUSED(base_flags);
if ( !AF_LATIN_HINTS_DO_STEM_ADJUST( hints ) ||
axis->extra_light )
return width;
if ( dist < 0 )
{
dist = -width;
sign = 1;
}
if ( ( vertical && !AF_LATIN_HINTS_DO_VERT_SNAP( hints ) ) ||
( !vertical && !AF_LATIN_HINTS_DO_HORZ_SNAP( hints ) ) )
{
/* smooth hinting process: very lightly quantize the stem width */
/* leave the widths of serifs alone */
if ( ( stem_flags & AF_EDGE_SERIF ) && vertical && ( dist < 3 * 64 ) )
goto Done_Width;
#if 0
else if ( ( base_flags & AF_EDGE_ROUND ) )
{
if ( dist < 80 )
dist = 64;
}
else if ( dist < 56 )
dist = 56;
#endif
if ( axis->width_count > 0 )
{
FT_Pos delta;
/* compare to standard width */
if ( axis->width_count > 0 )
{
delta = dist - axis->widths[0].cur;
if ( delta < 0 )
delta = -delta;
if ( delta < 40 )
{
dist = axis->widths[0].cur;
if ( dist < 48 )
dist = 48;
goto Done_Width;
}
}
if ( dist < 3 * 64 )
{
delta = dist & 63;
dist &= -64;
if ( delta < 10 )
dist += delta;
else if ( delta < 32 )
dist += 10;
else if ( delta < 54 )
dist += 54;
else
dist += delta;
}
else
dist = ( dist + 32 ) & ~63;
}
}
else
{
/* strong hinting process: snap the stem width to integer pixels */
FT_Pos org_dist = dist;
dist = af_latin2_snap_width( axis->widths, axis->width_count, dist );
if ( vertical )
{
/* in the case of vertical hinting, always round */
/* the stem heights to integer pixels */
if ( dist >= 64 )
dist = ( dist + 16 ) & ~63;
else
dist = 64;
}
else
{
if ( AF_LATIN_HINTS_DO_MONO( hints ) )
{
/* monochrome horizontal hinting: snap widths to integer pixels */
/* with a different threshold */
if ( dist < 64 )
dist = 64;
else
dist = ( dist + 32 ) & ~63;
}
else
{
/* for horizontal anti-aliased hinting, we adopt a more subtle */
/* approach: we strengthen small stems, round stems whose size */
/* is between 1 and 2 pixels to an integer, otherwise nothing */
if ( dist < 48 )
dist = ( dist + 64 ) >> 1;
else if ( dist < 128 )
{
/* We only round to an integer width if the corresponding */
/* distortion is less than 1/4 pixel. Otherwise this */
/* makes everything worse since the diagonals, which are */
/* not hinted, appear a lot bolder or thinner than the */
/* vertical stems. */
FT_Int delta;
dist = ( dist + 22 ) & ~63;
delta = dist - org_dist;
if ( delta < 0 )
delta = -delta;
if (delta >= 16)
{
dist = org_dist;
if ( dist < 48 )
dist = ( dist + 64 ) >> 1;
}
}
else
/* round otherwise to prevent color fringes in LCD mode */
dist = ( dist + 32 ) & ~63;
}
}
}
Done_Width:
if ( sign )
dist = -dist;
return dist;
}
/* align one stem edge relative to the previous stem edge */
static void
af_latin2_align_linked_edge( AF_GlyphHints hints,
AF_Dimension dim,
AF_Edge base_edge,
AF_Edge stem_edge )
{
FT_Pos dist = stem_edge->opos - base_edge->opos;
FT_Pos fitted_width = af_latin2_compute_stem_width(
hints, dim, dist,
(AF_Edge_Flags)base_edge->flags,
(AF_Edge_Flags)stem_edge->flags );
stem_edge->pos = base_edge->pos + fitted_width;
FT_TRACE5(( "LINK: edge %d (opos=%.2f) linked to (%.2f), "
"dist was %.2f, now %.2f\n",
stem_edge-hints->axis[dim].edges, stem_edge->opos / 64.0,
stem_edge->pos / 64.0, dist / 64.0, fitted_width / 64.0 ));
}
static void
af_latin2_align_serif_edge( AF_GlyphHints hints,
AF_Edge base,
AF_Edge serif )
{
FT_UNUSED( hints );
serif->pos = base->pos + (serif->opos - base->opos);
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** E D G E H I N T I N G ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
FT_LOCAL_DEF( void )
af_latin2_hint_edges( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
AF_Edge edges = axis->edges;
AF_Edge edge_limit = edges + axis->num_edges;
AF_Edge edge;
AF_Edge anchor = 0;
FT_Int has_serifs = 0;
FT_Pos anchor_drift = 0;
FT_TRACE5(( "==== hinting %s edges =====\n",
dim == AF_DIMENSION_HORZ ? "vertical" : "horizontal" ));
/* we begin by aligning all stems relative to the blue zone */
/* if needed -- that's only for horizontal edges */
if ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_BLUES( hints ) )
{
for ( edge = edges; edge < edge_limit; edge++ )
{
AF_Width blue;
AF_Edge edge1, edge2;
if ( edge->flags & AF_EDGE_DONE )
continue;
blue = edge->blue_edge;
edge1 = NULL;
edge2 = edge->link;
if ( blue )
{
edge1 = edge;
}
else if ( edge2 && edge2->blue_edge )
{
blue = edge2->blue_edge;
edge1 = edge2;
edge2 = edge;
}
if ( !edge1 )
continue;
FT_TRACE5(( "BLUE: edge %d (opos=%.2f) snapped to (%.2f), "
"was (%.2f)\n",
edge1-edges, edge1->opos / 64.0, blue->fit / 64.0,
edge1->pos / 64.0 ));
edge1->pos = blue->fit;
edge1->flags |= AF_EDGE_DONE;
if ( edge2 && !edge2->blue_edge )
{
af_latin2_align_linked_edge( hints, dim, edge1, edge2 );
edge2->flags |= AF_EDGE_DONE;
}
if ( !anchor )
{
anchor = edge;
anchor_drift = (anchor->pos - anchor->opos);
if (edge2)
anchor_drift = (anchor_drift + (edge2->pos - edge2->opos)) >> 1;
}
}
}
/* now we will align all stem edges, trying to maintain the */
/* relative order of stems in the glyph */
for ( edge = edges; edge < edge_limit; edge++ )
{
AF_Edge edge2;
if ( edge->flags & AF_EDGE_DONE )
continue;
/* skip all non-stem edges */
edge2 = edge->link;
if ( !edge2 )
{
has_serifs++;
continue;
}
/* now align the stem */
/* this should not happen, but it's better to be safe */
if ( edge2->blue_edge )
{
FT_TRACE5(( "ASSERTION FAILED for edge %d\n", edge2-edges ));
af_latin2_align_linked_edge( hints, dim, edge2, edge );
edge->flags |= AF_EDGE_DONE;
continue;
}
if ( !anchor )
{
FT_Pos org_len, org_center, cur_len;
FT_Pos cur_pos1, error1, error2, u_off, d_off;
org_len = edge2->opos - edge->opos;
cur_len = af_latin2_compute_stem_width(
hints, dim, org_len,
(AF_Edge_Flags)edge->flags,
(AF_Edge_Flags)edge2->flags );
if ( cur_len <= 64 )
u_off = d_off = 32;
else
{
u_off = 38;
d_off = 26;
}
if ( cur_len < 96 )
{
org_center = edge->opos + ( org_len >> 1 );
cur_pos1 = FT_PIX_ROUND( org_center );
error1 = org_center - ( cur_pos1 - u_off );
if ( error1 < 0 )
error1 = -error1;
error2 = org_center - ( cur_pos1 + d_off );
if ( error2 < 0 )
error2 = -error2;
if ( error1 < error2 )
cur_pos1 -= u_off;
else
cur_pos1 += d_off;
edge->pos = cur_pos1 - cur_len / 2;
edge2->pos = edge->pos + cur_len;
}
else
edge->pos = FT_PIX_ROUND( edge->opos );
FT_TRACE5(( "ANCHOR: edge %d (opos=%.2f) and %d (opos=%.2f)"
" snapped to (%.2f) (%.2f)\n",
edge-edges, edge->opos / 64.0,
edge2-edges, edge2->opos / 64.0,
edge->pos / 64.0, edge2->pos / 64.0 ));
anchor = edge;
edge->flags |= AF_EDGE_DONE;
af_latin2_align_linked_edge( hints, dim, edge, edge2 );
edge2->flags |= AF_EDGE_DONE;
anchor_drift = ( (anchor->pos - anchor->opos) +
(edge2->pos - edge2->opos)) >> 1;
FT_TRACE5(( "DRIFT: %.2f\n", anchor_drift/64.0 ));
}
else
{
FT_Pos org_pos, org_len, org_center, cur_center, cur_len;
FT_Pos org_left, org_right;
org_pos = edge->opos + anchor_drift;
org_len = edge2->opos - edge->opos;
org_center = org_pos + ( org_len >> 1 );
cur_len = af_latin2_compute_stem_width(
hints, dim, org_len,
(AF_Edge_Flags)edge->flags,
(AF_Edge_Flags)edge2->flags );
org_left = org_pos + ((org_len - cur_len) >> 1);
org_right = org_pos + ((org_len + cur_len) >> 1);
FT_TRACE5(( "ALIGN: left=%.2f right=%.2f ",
org_left / 64.0, org_right / 64.0 ));
cur_center = org_center;
if ( edge2->flags & AF_EDGE_DONE )
{
FT_TRACE5(( "\n" ));
edge->pos = edge2->pos - cur_len;
}
else
{
/* we want to compare several displacement, and choose
* the one that increases fitness while minimizing
* distortion as well
*/
FT_Pos displacements[6], scores[6], org, fit, delta;
FT_UInt count = 0;
/* note: don't even try to fit tiny stems */
if ( cur_len < 32 )
{
FT_TRACE5(( "tiny stem\n" ));
goto AlignStem;
}
/* if the span is within a single pixel, don't touch it */
if ( FT_PIX_FLOOR(org_left) == FT_PIX_CEIL(org_right) )
{
FT_TRACE5(( "single pixel stem\n" ));
goto AlignStem;
}
if (cur_len <= 96)
{
/* we want to avoid the absolute worst case which is
* when the left and right edges of the span each represent
* about 50% of the gray. we'd better want to change this
* to 25/75%, since this is much more pleasant to the eye with
* very acceptable distortion
*/
FT_Pos frac_left = (org_left) & 63;
FT_Pos frac_right = (org_right) & 63;
if ( frac_left >= 22 && frac_left <= 42 &&
frac_right >= 22 && frac_right <= 42 )
{
org = frac_left;
fit = (org <= 32) ? 16 : 48;
delta = FT_ABS(fit - org);
displacements[count] = fit - org;
scores[count++] = delta;
FT_TRACE5(( "dispA=%.2f (%d) ", (fit - org) / 64.0, delta ));
org = frac_right;
fit = (org <= 32) ? 16 : 48;
delta = FT_ABS(fit - org);
displacements[count] = fit - org;
scores[count++] = delta;
FT_TRACE5(( "dispB=%.2f (%d) ", (fit - org) / 64.0, delta ));
}
}
/* snapping the left edge to the grid */
org = org_left;
fit = FT_PIX_ROUND(org);
delta = FT_ABS(fit - org);
displacements[count] = fit - org;
scores[count++] = delta;
FT_TRACE5(( "dispC=%.2f (%d) ", (fit - org) / 64.0, delta ));
/* snapping the right edge to the grid */
org = org_right;
fit = FT_PIX_ROUND(org);
delta = FT_ABS(fit - org);
displacements[count] = fit - org;
scores[count++] = delta;
FT_TRACE5(( "dispD=%.2f (%d) ", (fit - org) / 64.0, delta ));
/* now find the best displacement */
{
FT_Pos best_score = scores[0];
FT_Pos best_disp = displacements[0];
FT_UInt nn;
for (nn = 1; nn < count; nn++)
{
if (scores[nn] < best_score)
{
best_score = scores[nn];
best_disp = displacements[nn];
}
}
cur_center = org_center + best_disp;
}
FT_TRACE5(( "\n" ));
}
AlignStem:
edge->pos = cur_center - (cur_len >> 1);
edge2->pos = edge->pos + cur_len;
FT_TRACE5(( "STEM1: %d (opos=%.2f) to %d (opos=%.2f)"
" snapped to (%.2f) and (%.2f),"
" org_len=%.2f cur_len=%.2f\n",
edge-edges, edge->opos / 64.0,
edge2-edges, edge2->opos / 64.0,
edge->pos / 64.0, edge2->pos / 64.0,
org_len / 64.0, cur_len / 64.0 ));
edge->flags |= AF_EDGE_DONE;
edge2->flags |= AF_EDGE_DONE;
if ( edge > edges && edge->pos < edge[-1].pos )
{
FT_TRACE5(( "BOUND: %d (pos=%.2f) to (%.2f)\n",
edge-edges, edge->pos / 64.0, edge[-1].pos / 64.0 ));
edge->pos = edge[-1].pos;
}
}
}
/* make sure that lowercase m's maintain their symmetry */
/* In general, lowercase m's have six vertical edges if they are sans */
/* serif, or twelve if they are with serifs. This implementation is */
/* based on that assumption, and seems to work very well with most */
/* faces. However, if for a certain face this assumption is not */
/* true, the m is just rendered like before. In addition, any stem */
/* correction will only be applied to symmetrical glyphs (even if the */
/* glyph is not an m), so the potential for unwanted distortion is */
/* relatively low. */
/* We don't handle horizontal edges since we can't easily assure that */
/* the third (lowest) stem aligns with the base line; it might end up */
/* one pixel higher or lower. */
#if 0
{
FT_Int n_edges = edge_limit - edges;
if ( dim == AF_DIMENSION_HORZ && ( n_edges == 6 || n_edges == 12 ) )
{
AF_Edge edge1, edge2, edge3;
FT_Pos dist1, dist2, span, delta;
if ( n_edges == 6 )
{
edge1 = edges;
edge2 = edges + 2;
edge3 = edges + 4;
}
else
{
edge1 = edges + 1;
edge2 = edges + 5;
edge3 = edges + 9;
}
dist1 = edge2->opos - edge1->opos;
dist2 = edge3->opos - edge2->opos;
span = dist1 - dist2;
if ( span < 0 )
span = -span;
if ( span < 8 )
{
delta = edge3->pos - ( 2 * edge2->pos - edge1->pos );
edge3->pos -= delta;
if ( edge3->link )
edge3->link->pos -= delta;
/* move the serifs along with the stem */
if ( n_edges == 12 )
{
( edges + 8 )->pos -= delta;
( edges + 11 )->pos -= delta;
}
edge3->flags |= AF_EDGE_DONE;
if ( edge3->link )
edge3->link->flags |= AF_EDGE_DONE;
}
}
}
#endif
if ( has_serifs || !anchor )
{
/*
* now hint the remaining edges (serifs and single) in order
* to complete our processing
*/
for ( edge = edges; edge < edge_limit; edge++ )
{
FT_Pos delta;
if ( edge->flags & AF_EDGE_DONE )
continue;
delta = 1000;
if ( edge->serif )
{
delta = edge->serif->opos - edge->opos;
if ( delta < 0 )
delta = -delta;
}
if ( delta < 64 + 16 )
{
af_latin2_align_serif_edge( hints, edge->serif, edge );
FT_TRACE5(( "SERIF: edge %d (opos=%.2f) serif to %d (opos=%.2f)"
" aligned to (%.2f)\n",
edge-edges, edge->opos / 64.0,
edge->serif - edges, edge->serif->opos / 64.0,
edge->pos / 64.0 ));
}
else if ( !anchor )
{
FT_TRACE5(( "SERIF_ANCHOR: edge %d (opos=%.2f)"
" snapped to (%.2f)\n",
edge-edges, edge->opos / 64.0, edge->pos / 64.0 ));
edge->pos = FT_PIX_ROUND( edge->opos );
anchor = edge;
}
else
{
AF_Edge before, after;
for ( before = edge - 1; before >= edges; before-- )
if ( before->flags & AF_EDGE_DONE )
break;
for ( after = edge + 1; after < edge_limit; after++ )
if ( after->flags & AF_EDGE_DONE )
break;
if ( before >= edges && before < edge &&
after < edge_limit && after > edge )
{
if ( after->opos == before->opos )
edge->pos = before->pos;
else
edge->pos = before->pos +
FT_MulDiv( edge->opos - before->opos,
after->pos - before->pos,
after->opos - before->opos );
FT_TRACE5(( "SERIF_LINK1: edge %d (opos=%.2f) snapped to (%.2f)"
" from %d (opos=%.2f)\n",
edge-edges, edge->opos / 64.0, edge->pos / 64.0,
before - edges, before->opos / 64.0 ));
}
else
{
edge->pos = anchor->pos +
( ( edge->opos - anchor->opos + 16 ) & ~31 );
FT_TRACE5(( "SERIF_LINK2: edge %d (opos=%.2f)"
" snapped to (%.2f)\n",
edge-edges, edge->opos / 64.0, edge->pos / 64.0 ));
}
}
edge->flags |= AF_EDGE_DONE;
if ( edge > edges && edge->pos < edge[-1].pos )
edge->pos = edge[-1].pos;
if ( edge + 1 < edge_limit &&
edge[1].flags & AF_EDGE_DONE &&
edge->pos > edge[1].pos )
edge->pos = edge[1].pos;
}
}
}
static FT_Error
af_latin2_hints_apply( AF_GlyphHints hints,
FT_Outline* outline,
AF_LatinMetrics metrics )
{
FT_Error error;
int dim;
error = af_glyph_hints_reload( hints, outline );
if ( error )
goto Exit;
/* analyze glyph outline */
if ( AF_HINTS_DO_HORIZONTAL( hints ) )
{
error = af_latin2_hints_detect_features( hints, AF_DIMENSION_HORZ );
if ( error )
goto Exit;
}
if ( AF_HINTS_DO_VERTICAL( hints ) )
{
error = af_latin2_hints_detect_features( hints, AF_DIMENSION_VERT );
if ( error )
goto Exit;
af_latin2_hints_compute_blue_edges( hints, metrics );
}
/* grid-fit the outline */
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
if ( ( dim == AF_DIMENSION_HORZ && AF_HINTS_DO_HORIZONTAL( hints ) ) ||
( dim == AF_DIMENSION_VERT && AF_HINTS_DO_VERTICAL( hints ) ) )
{
af_latin2_hint_edges( hints, (AF_Dimension)dim );
af_glyph_hints_align_edge_points( hints, (AF_Dimension)dim );
af_glyph_hints_align_strong_points( hints, (AF_Dimension)dim );
af_glyph_hints_align_weak_points( hints, (AF_Dimension)dim );
}
}
af_glyph_hints_save( hints, outline );
Exit:
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** L A T I N S C R I P T C L A S S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static const AF_Script_UniRangeRec af_latin2_uniranges[] =
{
/* TODO: Add new Unicode ranges here! */
AF_UNIRANGE_REC( 32UL, 127UL ),
AF_UNIRANGE_REC( 160UL, 255UL ),
AF_UNIRANGE_REC( 0UL, 0UL )
};
AF_DEFINE_SCRIPT_CLASS( af_latin2_script_class,
AF_SCRIPT_LATIN2,
af_latin2_uniranges,
'o',
sizeof ( AF_LatinMetricsRec ),
(AF_Script_InitMetricsFunc) af_latin2_metrics_init,
(AF_Script_ScaleMetricsFunc)af_latin2_metrics_scale,
(AF_Script_DoneMetricsFunc) NULL,
(AF_Script_InitHintsFunc) af_latin2_hints_init,
(AF_Script_ApplyHintsFunc) af_latin2_hints_apply
)
/* END */
#endif
/***************************************************************************/
/* */
/* afcjk.c */
/* */
/* Auto-fitter hinting routines for CJK script (body). */
/* */
/* Copyright 2006-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*
* The algorithm is based on akito's autohint patch, available here:
*
* http://www.kde.gr.jp/~akito/patch/freetype2/
*
*/
#undef AF_CONFIG_OPTION_CJK_BLUE_HANI_VERT
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_afcjk
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** C J K G L O B A L M E T R I C S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* Basically the Latin version with AF_CJKMetrics */
/* to replace AF_LatinMetrics. */
FT_LOCAL_DEF( void )
af_cjk_metrics_init_widths( AF_CJKMetrics metrics,
FT_Face face )
{
/* scan the array of segments in each direction */
AF_GlyphHintsRec hints[1];
af_glyph_hints_init( hints, face->memory );
metrics->axis[AF_DIMENSION_HORZ].width_count = 0;
metrics->axis[AF_DIMENSION_VERT].width_count = 0;
{
FT_Error error;
FT_UInt glyph_index;
int dim;
AF_CJKMetricsRec dummy[1];
AF_Scaler scaler = &dummy->root.scaler;
glyph_index = FT_Get_Char_Index( face,
metrics->root.clazz->standard_char );
if ( glyph_index == 0 )
goto Exit;
error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE );
if ( error || face->glyph->outline.n_points <= 0 )
goto Exit;
FT_ZERO( dummy );
dummy->units_per_em = metrics->units_per_em;
scaler->x_scale = 0x10000L;
scaler->y_scale = 0x10000L;
scaler->x_delta = 0;
scaler->y_delta = 0;
scaler->face = face;
scaler->render_mode = FT_RENDER_MODE_NORMAL;
scaler->flags = 0;
af_glyph_hints_rescale( hints, (AF_ScriptMetrics)dummy );
error = af_glyph_hints_reload( hints, &face->glyph->outline );
if ( error )
goto Exit;
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
AF_CJKAxis axis = &metrics->axis[dim];
AF_AxisHints axhints = &hints->axis[dim];
AF_Segment seg, limit, link;
FT_UInt num_widths = 0;
error = af_latin_hints_compute_segments( hints, (AF_Dimension)dim );
if ( error )
goto Exit;
af_latin_hints_link_segments( hints, (AF_Dimension)dim );
seg = axhints->segments;
limit = seg + axhints->num_segments;
for ( ; seg < limit; seg++ )
{
link = seg->link;
/* we only consider stem segments there! */
if ( link && link->link == seg && link > seg )
{
FT_Pos dist;
dist = seg->pos - link->pos;
if ( dist < 0 )
dist = -dist;
if ( num_widths < AF_CJK_MAX_WIDTHS )
axis->widths[num_widths++].org = dist;
}
}
/* this also replaces multiple almost identical stem widths */
/* with a single one (the value 100 is heuristic) */
af_sort_and_quantize_widths( &num_widths, axis->widths,
dummy->units_per_em / 100 );
axis->width_count = num_widths;
}
Exit:
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
AF_CJKAxis axis = &metrics->axis[dim];
FT_Pos stdw;
stdw = ( axis->width_count > 0 ) ? axis->widths[0].org
: AF_LATIN_CONSTANT( metrics, 50 );
/* let's try 20% of the smallest width */
axis->edge_distance_threshold = stdw / 5;
axis->standard_width = stdw;
axis->extra_light = 0;
}
}
af_glyph_hints_done( hints );
}
#define AF_CJK_MAX_TEST_CHARACTERS 32
/* Each blue zone has two types of fill and unfill, this is, */
/* filling the entire glyph square or not. */
enum
{
AF_CJK_BLUE_TYPE_FILL,
AF_CJK_BLUE_TYPE_UNFILL,
AF_CJK_BLUE_TYPE_MAX
};
/* Put some common and representative Han Ideographs characters here. */
static const FT_ULong af_cjk_hani_blue_chars[AF_CJK_BLUE_MAX]
[AF_CJK_BLUE_TYPE_MAX]
[AF_CJK_MAX_TEST_CHARACTERS] =
{
{
{
0x4ED6, 0x4EEC, 0x4F60, 0x4F86, 0x5011, 0x5230, 0x548C, 0x5730,
0x5BF9, 0x5C0D, 0x5C31, 0x5E2D, 0x6211, 0x65F6, 0x6642, 0x6703,
0x6765, 0x70BA, 0x80FD, 0x8230, 0x8AAA, 0x8BF4, 0x8FD9, 0x9019,
/* top fill */
0x9F4A
},
{
0x519B, 0x540C, 0x5DF2, 0x613F, 0x65E2, 0x661F, 0x662F, 0x666F,
0x6C11, 0x7167, 0x73B0, 0x73FE, 0x7406, 0x7528, 0x7F6E, 0x8981,
0x8ECD, 0x90A3, 0x914D, 0x91CC, 0x958B, 0x96F7, 0x9732, 0x9762,
/* top unfill */
0x987E
}
},
{
{
0x4E2A, 0x4E3A, 0x4EBA, 0x4ED6, 0x4EE5, 0x4EEC, 0x4F60, 0x4F86,
0x500B, 0x5011, 0x5230, 0x548C, 0x5927, 0x5BF9, 0x5C0D, 0x5C31,
0x6211, 0x65F6, 0x6642, 0x6709, 0x6765, 0x70BA, 0x8981, 0x8AAA,
/* bottom fill */
0x8BF4
},
{
0x4E3B, 0x4E9B, 0x56E0, 0x5B83, 0x60F3, 0x610F, 0x7406, 0x751F,
0x7576, 0x770B, 0x7740, 0x7F6E, 0x8005, 0x81EA, 0x8457, 0x88E1,
0x8FC7, 0x8FD8, 0x8FDB, 0x9032, 0x904E, 0x9053, 0x9084, 0x91CC,
/* bottom unfill */
0x9762
}
},
#ifndef AF_CONFIG_OPTION_CJK_BLUE_HANI_VERT
{ {0x0000}, {0x0000} },
{ {0x0000}, {0x0000} }
#else
{
{
0x4E9B, 0x4EEC, 0x4F60, 0x4F86, 0x5011, 0x5230, 0x548C, 0x5730,
0x5979, 0x5C06, 0x5C07, 0x5C31, 0x5E74, 0x5F97, 0x60C5, 0x6700,
0x6837, 0x6A23, 0x7406, 0x80FD, 0x8AAA, 0x8BF4, 0x8FD9, 0x9019,
/* left fill */
0x901A
},
{
0x5373, 0x5417, 0x5427, 0x542C, 0x5462, 0x54C1, 0x54CD, 0x55CE,
0x5E08, 0x5E2B, 0x6536, 0x65AD, 0x65B7, 0x660E, 0x773C, 0x9593,
0x95F4, 0x9645, 0x9648, 0x9650, 0x9664, 0x9673, 0x968F, 0x969B,
/* left unfill */
0x96A8
}
},
{
{
0x4E8B, 0x524D, 0x5B78, 0x5C06, 0x5C07, 0x60C5, 0x60F3, 0x6216,
0x653F, 0x65AF, 0x65B0, 0x6837, 0x6A23, 0x6C11, 0x6C92, 0x6CA1,
0x7136, 0x7279, 0x73B0, 0x73FE, 0x7403, 0x7B2C, 0x7D93, 0x8C01,
/* right fill */
0x8D77
},
{
0x4F8B, 0x5225, 0x522B, 0x5236, 0x52A8, 0x52D5, 0x5417, 0x55CE,
0x589E, 0x6307, 0x660E, 0x671D, 0x671F, 0x6784, 0x7269, 0x786E,
0x79CD, 0x8ABF, 0x8C03, 0x8CBB, 0x8D39, 0x90A3, 0x90FD, 0x9593,
/* right unfill */
0x95F4
}
}
/* AF_CONFIG_OPTION_CJK_BLUE_HANI_VERT */
#endif
};
/* Calculate blue zones for all the CJK_BLUE_XXX's. */
static void
af_cjk_metrics_init_blues( AF_CJKMetrics metrics,
FT_Face face,
const FT_ULong blue_chars
[AF_CJK_BLUE_MAX]
[AF_CJK_BLUE_TYPE_MAX]
[AF_CJK_MAX_TEST_CHARACTERS] )
{
FT_Pos fills[AF_CJK_MAX_TEST_CHARACTERS];
FT_Pos flats[AF_CJK_MAX_TEST_CHARACTERS];
FT_Int num_fills;
FT_Int num_flats;
FT_Int bb;
AF_CJKBlue blue;
FT_Error error;
AF_CJKAxis axis;
FT_GlyphSlot glyph = face->glyph;
/* We compute the blues simply by loading each character from the */
/* `blue_chars[blues]' string, then computing its extreme points */
/* (depending blue zone type etc.). */
FT_TRACE5(( "cjk blue zones computation\n" ));
FT_TRACE5(( "------------------------------------------------\n" ));
for ( bb = 0; bb < AF_CJK_BLUE_MAX; bb++ )
{
FT_Int fill_type;
FT_Pos* blue_ref;
FT_Pos* blue_shoot;
num_fills = 0;
num_flats = 0;
for ( fill_type = 0; fill_type < AF_CJK_BLUE_TYPE_MAX; fill_type++ )
{
const FT_ULong* p = blue_chars[bb][fill_type];
const FT_ULong* limit = p + AF_CJK_MAX_TEST_CHARACTERS;
FT_Bool fill = FT_BOOL(
fill_type == AF_CJK_BLUE_TYPE_FILL );
FT_TRACE5(( "cjk blue %s/%s\n", cjk_blue_name[bb],
cjk_blue_type_name[fill_type] ));
for ( ; p < limit && *p; p++ )
{
FT_UInt glyph_index;
/* same as points.y */
FT_Pos best_pos;
FT_Int best_point;
FT_Vector* points;
FT_TRACE5(( " U+%lX...", *p ));
/* load the character in the face -- skip unknown or empty ones */
glyph_index = FT_Get_Char_Index( face, *p );
if ( glyph_index == 0 )
{
FT_TRACE5(( "unavailable\n" ));
continue;
}
error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE );
if ( error || glyph->outline.n_points <= 0 )
{
FT_TRACE5(( "no outline\n" ));
continue;
}
/* now compute min or max point indices and coordinates */
points = glyph->outline.points;
best_point = -1;
/* make compiler happy */
best_pos = 0;
{
FT_Int nn;
FT_Int first = 0;
FT_Int last = -1;
for ( nn = 0;
nn < glyph->outline.n_contours;
first = last + 1, nn++ )
{
FT_Int pp;
last = glyph->outline.contours[nn];
/* Avoid single-point contours since they are never */
/* rasterized. In some fonts, they correspond to mark */
/* attachment points which are way outside of the glyph's */
/* real outline. */
if ( last <= first )
continue;
switch ( bb )
{
case AF_CJK_BLUE_TOP:
for ( pp = first; pp <= last; pp++ )
if ( best_point < 0 || points[pp].y > best_pos )
{
best_point = pp;
best_pos = points[pp].y;
}
break;
case AF_CJK_BLUE_BOTTOM:
for ( pp = first; pp <= last; pp++ )
if ( best_point < 0 || points[pp].y < best_pos )
{
best_point = pp;
best_pos = points[pp].y;
}
break;
case AF_CJK_BLUE_LEFT:
for ( pp = first; pp <= last; pp++ )
if ( best_point < 0 || points[pp].x < best_pos )
{
best_point = pp;
best_pos = points[pp].x;
}
break;
case AF_CJK_BLUE_RIGHT:
for ( pp = first; pp <= last; pp++ )
if ( best_point < 0 || points[pp].x > best_pos )
{
best_point = pp;
best_pos = points[pp].x;
}
break;
default:
;
}
}
FT_TRACE5(( "best_pos=%5ld\n", best_pos ));
}
if ( fill )
fills[num_fills++] = best_pos;
else
flats[num_flats++] = best_pos;
}
}
if ( num_flats == 0 && num_fills == 0 )
{
/*
* we couldn't find a single glyph to compute this blue zone,
* we will simply ignore it then
*/
FT_TRACE5(( "empty\n" ));
continue;
}
/* we have computed the contents of the `fill' and `flats' tables, */
/* now determine the reference position of the blue -- */
/* we simply take the median value after a simple sort */
af_sort_pos( num_flats, flats );
af_sort_pos( num_fills, fills );
if ( AF_CJK_BLUE_TOP == bb || AF_CJK_BLUE_BOTTOM == bb )
axis = &metrics->axis[AF_DIMENSION_VERT];
else
axis = &metrics->axis[AF_DIMENSION_HORZ];
blue = & axis->blues[axis->blue_count];
blue_ref = & blue->ref.org;
blue_shoot = & blue->shoot.org;
axis->blue_count++;
if ( num_flats == 0 )
{
*blue_ref = fills[num_fills / 2];
*blue_shoot = fills[num_fills / 2];
}
else if ( num_fills == 0 )
{
*blue_ref = flats[num_flats / 2];
*blue_shoot = flats[num_flats / 2];
}
else
{
*blue_ref = fills[num_fills / 2];
*blue_shoot = flats[num_flats / 2];
}
/* make sure blue_ref >= blue_shoot for top/right or */
/* vice versa for bottom/left */
if ( *blue_shoot != *blue_ref )
{
FT_Pos ref = *blue_ref;
FT_Pos shoot = *blue_shoot;
FT_Bool under_ref = FT_BOOL( shoot < ref );
if ( (AF_CJK_BLUE_TOP == bb || AF_CJK_BLUE_RIGHT == bb) ^ under_ref )
*blue_shoot = *blue_ref = ( shoot + ref ) / 2;
}
blue->flags = 0;
if ( AF_CJK_BLUE_TOP == bb )
blue->flags |= AF_CJK_BLUE_IS_TOP;
else if ( AF_CJK_BLUE_RIGHT == bb )
blue->flags |= AF_CJK_BLUE_IS_RIGHT;
FT_TRACE5(( "-- cjk %s bluezone ref = %ld shoot = %ld\n",
cjk_blue_name[bb], *blue_ref, *blue_shoot ));
}
return;
}
/* Basically the Latin version with type AF_CJKMetrics for metrics. */
FT_LOCAL_DEF( void )
af_cjk_metrics_check_digits( AF_CJKMetrics metrics,
FT_Face face )
{
FT_UInt i;
FT_Bool started = 0, same_width = 1;
FT_Fixed advance, old_advance = 0;
/* check whether all ASCII digits have the same advance width; */
/* digit `0' is 0x30 in all supported charmaps */
for ( i = 0x30; i <= 0x39; i++ )
{
FT_UInt glyph_index;
glyph_index = FT_Get_Char_Index( face, i );
if ( glyph_index == 0 )
continue;
if ( FT_Get_Advance( face, glyph_index,
FT_LOAD_NO_SCALE |
FT_LOAD_NO_HINTING |
FT_LOAD_IGNORE_TRANSFORM,
&advance ) )
continue;
if ( started )
{
if ( advance != old_advance )
{
same_width = 0;
break;
}
}
else
{
old_advance = advance;
started = 1;
}
}
metrics->root.digits_have_same_width = same_width;
}
FT_LOCAL_DEF( FT_Error )
af_cjk_metrics_init( AF_CJKMetrics metrics,
FT_Face face )
{
FT_CharMap oldmap = face->charmap;
metrics->units_per_em = face->units_per_EM;
if ( FT_Select_Charmap( face, FT_ENCODING_UNICODE ) )
face->charmap = NULL;
else
{
af_cjk_metrics_init_widths( metrics, face );
af_cjk_metrics_init_blues( metrics, face, af_cjk_hani_blue_chars );
af_cjk_metrics_check_digits( metrics, face );
}
FT_Set_Charmap( face, oldmap );
return AF_Err_Ok;
}
static void
af_cjk_metrics_scale_dim( AF_CJKMetrics metrics,
AF_Scaler scaler,
AF_Dimension dim )
{
FT_Fixed scale;
FT_Pos delta;
AF_CJKAxis axis;
FT_UInt nn;
axis = &metrics->axis[dim];
if ( dim == AF_DIMENSION_HORZ )
{
scale = scaler->x_scale;
delta = scaler->x_delta;
}
else
{
scale = scaler->y_scale;
delta = scaler->y_delta;
}
if ( axis->org_scale == scale && axis->org_delta == delta )
return;
axis->org_scale = scale;
axis->org_delta = delta;
axis->scale = scale;
axis->delta = delta;
/* scale the blue zones */
for ( nn = 0; nn < axis->blue_count; nn++ )
{
AF_CJKBlue blue = &axis->blues[nn];
FT_Pos dist;
blue->ref.cur = FT_MulFix( blue->ref.org, scale ) + delta;
blue->ref.fit = blue->ref.cur;
blue->shoot.cur = FT_MulFix( blue->shoot.org, scale ) + delta;
blue->shoot.fit = blue->shoot.cur;
blue->flags &= ~AF_CJK_BLUE_ACTIVE;
/* a blue zone is only active if it is less than 3/4 pixels tall */
dist = FT_MulFix( blue->ref.org - blue->shoot.org, scale );
if ( dist <= 48 && dist >= -48 )
{
FT_Pos delta1, delta2;
blue->ref.fit = FT_PIX_ROUND( blue->ref.cur );
/* shoot is under shoot for cjk */
delta1 = FT_DivFix( blue->ref.fit, scale ) - blue->shoot.org;
delta2 = delta1;
if ( delta1 < 0 )
delta2 = -delta2;
delta2 = FT_MulFix( delta2, scale );
FT_TRACE5(( "delta: %d", delta1 ));
if ( delta2 < 32 )
delta2 = 0;
#if 0
else if ( delta2 < 64 )
delta2 = 32 + ( ( ( delta2 - 32 ) + 16 ) & ~31 );
#endif
else
delta2 = FT_PIX_ROUND( delta2 );
FT_TRACE5(( "/%d\n", delta2 ));
if ( delta1 < 0 )
delta2 = -delta2;
blue->shoot.fit = blue->ref.fit - delta2;
FT_TRACE5(( ">> active cjk blue zone %c%d[%ld/%ld]: "
"ref: cur=%.2f fit=%.2f shoot: cur=%.2f fit=%.2f\n",
( dim == AF_DIMENSION_HORZ ) ? 'H' : 'V',
nn, blue->ref.org, blue->shoot.org,
blue->ref.cur / 64.0, blue->ref.fit / 64.0,
blue->shoot.cur / 64.0, blue->shoot.fit / 64.0 ));
blue->flags |= AF_CJK_BLUE_ACTIVE;
}
}
}
FT_LOCAL_DEF( void )
af_cjk_metrics_scale( AF_CJKMetrics metrics,
AF_Scaler scaler )
{
metrics->root.scaler = *scaler;
af_cjk_metrics_scale_dim( metrics, scaler, AF_DIMENSION_HORZ );
af_cjk_metrics_scale_dim( metrics, scaler, AF_DIMENSION_VERT );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** C J K G L Y P H A N A L Y S I S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static FT_Error
af_cjk_hints_compute_segments( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
AF_Segment segments = axis->segments;
AF_Segment segment_limit = segments + axis->num_segments;
FT_Error error;
AF_Segment seg;
error = af_latin_hints_compute_segments( hints, dim );
if ( error )
return error;
/* a segment is round if it doesn't have successive */
/* on-curve points. */
for ( seg = segments; seg < segment_limit; seg++ )
{
AF_Point pt = seg->first;
AF_Point last = seg->last;
AF_Flags f0 = (AF_Flags)(pt->flags & AF_FLAG_CONTROL);
AF_Flags f1;
seg->flags &= ~AF_EDGE_ROUND;
for ( ; pt != last; f0 = f1 )
{
pt = pt->next;
f1 = (AF_Flags)(pt->flags & AF_FLAG_CONTROL);
if ( !f0 && !f1 )
break;
if ( pt == last )
seg->flags |= AF_EDGE_ROUND;
}
}
return AF_Err_Ok;
}
static void
af_cjk_hints_link_segments( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
AF_Segment segments = axis->segments;
AF_Segment segment_limit = segments + axis->num_segments;
AF_Direction major_dir = axis->major_dir;
AF_Segment seg1, seg2;
FT_Pos len_threshold;
FT_Pos dist_threshold;
len_threshold = AF_LATIN_CONSTANT( hints->metrics, 8 );
dist_threshold = ( dim == AF_DIMENSION_HORZ ) ? hints->x_scale
: hints->y_scale;
dist_threshold = FT_DivFix( 64 * 3, dist_threshold );
/* now compare each segment to the others */
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
/* the fake segments are for metrics hinting only */
if ( seg1->first == seg1->last )
continue;
if ( seg1->dir != major_dir )
continue;
for ( seg2 = segments; seg2 < segment_limit; seg2++ )
if ( seg2 != seg1 && seg1->dir + seg2->dir == 0 )
{
FT_Pos dist = seg2->pos - seg1->pos;
if ( dist < 0 )
continue;
{
FT_Pos min = seg1->min_coord;
FT_Pos max = seg1->max_coord;
FT_Pos len;
if ( min < seg2->min_coord )
min = seg2->min_coord;
if ( max > seg2->max_coord )
max = seg2->max_coord;
len = max - min;
if ( len >= len_threshold )
{
if ( dist * 8 < seg1->score * 9 &&
( dist * 8 < seg1->score * 7 || seg1->len < len ) )
{
seg1->score = dist;
seg1->len = len;
seg1->link = seg2;
}
if ( dist * 8 < seg2->score * 9 &&
( dist * 8 < seg2->score * 7 || seg2->len < len ) )
{
seg2->score = dist;
seg2->len = len;
seg2->link = seg1;
}
}
}
}
}
/*
* now compute the `serif' segments
*
* In Hanzi, some strokes are wider on one or both of the ends.
* We either identify the stems on the ends as serifs or remove
* the linkage, depending on the length of the stems.
*
*/
{
AF_Segment link1, link2;
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
link1 = seg1->link;
if ( !link1 || link1->link != seg1 || link1->pos <= seg1->pos )
continue;
if ( seg1->score >= dist_threshold )
continue;
for ( seg2 = segments; seg2 < segment_limit; seg2++ )
{
if ( seg2->pos > seg1->pos || seg1 == seg2 )
continue;
link2 = seg2->link;
if ( !link2 || link2->link != seg2 || link2->pos < link1->pos )
continue;
if ( seg1->pos == seg2->pos && link1->pos == link2->pos )
continue;
if ( seg2->score <= seg1->score || seg1->score * 4 <= seg2->score )
continue;
/* seg2 < seg1 < link1 < link2 */
if ( seg1->len >= seg2->len * 3 )
{
AF_Segment seg;
for ( seg = segments; seg < segment_limit; seg++ )
{
AF_Segment link = seg->link;
if ( link == seg2 )
{
seg->link = 0;
seg->serif = link1;
}
else if ( link == link2 )
{
seg->link = 0;
seg->serif = seg1;
}
}
}
else
{
seg1->link = link1->link = 0;
break;
}
}
}
}
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
seg2 = seg1->link;
if ( seg2 )
{
seg2->num_linked++;
if ( seg2->link != seg1 )
{
seg1->link = 0;
if ( seg2->score < dist_threshold || seg1->score < seg2->score * 4 )
seg1->serif = seg2->link;
else
seg2->num_linked--;
}
}
}
}
static FT_Error
af_cjk_hints_compute_edges( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
FT_Error error = AF_Err_Ok;
FT_Memory memory = hints->memory;
AF_CJKAxis laxis = &((AF_CJKMetrics)hints->metrics)->axis[dim];
AF_Segment segments = axis->segments;
AF_Segment segment_limit = segments + axis->num_segments;
AF_Segment seg;
FT_Fixed scale;
FT_Pos edge_distance_threshold;
axis->num_edges = 0;
scale = ( dim == AF_DIMENSION_HORZ ) ? hints->x_scale
: hints->y_scale;
/*********************************************************************/
/* */
/* We begin by generating a sorted table of edges for the current */
/* direction. To do so, we simply scan each segment and try to find */
/* an edge in our table that corresponds to its position. */
/* */
/* If no edge is found, we create and insert a new edge in the */
/* sorted table. Otherwise, we simply add the segment to the edge's */
/* list which is then processed in the second step to compute the */
/* edge's properties. */
/* */
/* Note that the edges table is sorted along the segment/edge */
/* position. */
/* */
/*********************************************************************/
edge_distance_threshold = FT_MulFix( laxis->edge_distance_threshold,
scale );
if ( edge_distance_threshold > 64 / 4 )
edge_distance_threshold = FT_DivFix( 64 / 4, scale );
else
edge_distance_threshold = laxis->edge_distance_threshold;
for ( seg = segments; seg < segment_limit; seg++ )
{
AF_Edge found = 0;
FT_Pos best = 0xFFFFU;
FT_Int ee;
/* look for an edge corresponding to the segment */
for ( ee = 0; ee < axis->num_edges; ee++ )
{
AF_Edge edge = axis->edges + ee;
FT_Pos dist;
if ( edge->dir != seg->dir )
continue;
dist = seg->pos - edge->fpos;
if ( dist < 0 )
dist = -dist;
if ( dist < edge_distance_threshold && dist < best )
{
AF_Segment link = seg->link;
/* check whether all linked segments of the candidate edge */
/* can make a single edge. */
if ( link )
{
AF_Segment seg1 = edge->first;
AF_Segment link1;
FT_Pos dist2 = 0;
do
{
link1 = seg1->link;
if ( link1 )
{
dist2 = AF_SEGMENT_DIST( link, link1 );
if ( dist2 >= edge_distance_threshold )
break;
}
} while ( ( seg1 = seg1->edge_next ) != edge->first );
if ( dist2 >= edge_distance_threshold )
continue;
}
best = dist;
found = edge;
}
}
if ( !found )
{
AF_Edge edge;
/* insert a new edge in the list and */
/* sort according to the position */
error = af_axis_hints_new_edge( axis, seg->pos,
(AF_Direction)seg->dir,
memory, &edge );
if ( error )
goto Exit;
/* add the segment to the new edge's list */
FT_ZERO( edge );
edge->first = seg;
edge->last = seg;
edge->fpos = seg->pos;
edge->opos = edge->pos = FT_MulFix( seg->pos, scale );
seg->edge_next = seg;
edge->dir = seg->dir;
}
else
{
/* if an edge was found, simply add the segment to the edge's */
/* list */
seg->edge_next = found->first;
found->last->edge_next = seg;
found->last = seg;
}
}
/*********************************************************************/
/* */
/* Good, we now compute each edge's properties according to segments */
/* found on its position. Basically, these are as follows. */
/* */
/* - edge's main direction */
/* - stem edge, serif edge or both (which defaults to stem then) */
/* - rounded edge, straight or both (which defaults to straight) */
/* - link for edge */
/* */
/*********************************************************************/
/* first of all, set the `edge' field in each segment -- this is */
/* required in order to compute edge links */
/* */
/* Note that removing this loop and setting the `edge' field of each */
/* segment directly in the code above slows down execution speed for */
/* some reasons on platforms like the Sun. */
{
AF_Edge edges = axis->edges;
AF_Edge edge_limit = edges + axis->num_edges;
AF_Edge edge;
for ( edge = edges; edge < edge_limit; edge++ )
{
seg = edge->first;
if ( seg )
do
{
seg->edge = edge;
seg = seg->edge_next;
} while ( seg != edge->first );
}
/* now compute each edge properties */
for ( edge = edges; edge < edge_limit; edge++ )
{
/* does it contain round segments? */
FT_Int is_round = 0;
/* does it contain straight segments? */
FT_Int is_straight = 0;
seg = edge->first;
do
{
FT_Bool is_serif;
/* check for roundness of segment */
if ( seg->flags & AF_EDGE_ROUND )
is_round++;
else
is_straight++;
/* check for links -- if seg->serif is set, then seg->link must */
/* be ignored */
is_serif = (FT_Bool)( seg->serif && seg->serif->edge != edge );
if ( seg->link || is_serif )
{
AF_Edge edge2;
AF_Segment seg2;
edge2 = edge->link;
seg2 = seg->link;
if ( is_serif )
{
seg2 = seg->serif;
edge2 = edge->serif;
}
if ( edge2 )
{
FT_Pos edge_delta;
FT_Pos seg_delta;
edge_delta = edge->fpos - edge2->fpos;
if ( edge_delta < 0 )
edge_delta = -edge_delta;
seg_delta = AF_SEGMENT_DIST( seg, seg2 );
if ( seg_delta < edge_delta )
edge2 = seg2->edge;
}
else
edge2 = seg2->edge;
if ( is_serif )
{
edge->serif = edge2;
edge2->flags |= AF_EDGE_SERIF;
}
else
edge->link = edge2;
}
seg = seg->edge_next;
} while ( seg != edge->first );
/* set the round/straight flags */
edge->flags = AF_EDGE_NORMAL;
if ( is_round > 0 && is_round >= is_straight )
edge->flags |= AF_EDGE_ROUND;
/* get rid of serifs if link is set */
/* XXX: This gets rid of many unpleasant artefacts! */
/* Example: the `c' in cour.pfa at size 13 */
if ( edge->serif && edge->link )
edge->serif = 0;
}
}
Exit:
return error;
}
static FT_Error
af_cjk_hints_detect_features( AF_GlyphHints hints,
AF_Dimension dim )
{
FT_Error error;
error = af_cjk_hints_compute_segments( hints, dim );
if ( !error )
{
af_cjk_hints_link_segments( hints, dim );
error = af_cjk_hints_compute_edges( hints, dim );
}
return error;
}
FT_LOCAL_DEF( void )
af_cjk_hints_compute_blue_edges( AF_GlyphHints hints,
AF_CJKMetrics metrics,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
AF_Edge edge = axis->edges;
AF_Edge edge_limit = edge + axis->num_edges;
AF_CJKAxis cjk = &metrics->axis[dim];
FT_Fixed scale = cjk->scale;
/* initial threshold */
FT_Pos best_dist0;
/* compute the initial threshold as a fraction of the EM size */
best_dist0 = FT_MulFix( metrics->units_per_em / 40, scale );
/* maximum 1/2 pixel */
if ( best_dist0 > 64 / 2 )
best_dist0 = 64 / 2;
/* compute which blue zones are active, i.e. have their scaled */
/* size < 3/4 pixels */
/* If the distant between an edge and a blue zone is shorter than */
/* best_dist0, set the blue zone for the edge. Then search for */
/* the blue zone with the smallest best_dist to the edge. */
for ( ; edge < edge_limit; edge++ )
{
FT_UInt bb;
AF_Width best_blue = NULL;
FT_Pos best_dist = best_dist0;
for ( bb = 0; bb < cjk->blue_count; bb++ )
{
AF_CJKBlue blue = cjk->blues + bb;
FT_Bool is_top_right_blue, is_major_dir;
/* skip inactive blue zones (i.e., those that are too small) */
if ( !( blue->flags & AF_CJK_BLUE_ACTIVE ) )
continue;
/* if it is a top zone, check for right edges -- if it is a bottom */
/* zone, check for left edges */
/* */
/* of course, that's for TrueType */
is_top_right_blue =
FT_BOOL( ( ( blue->flags & AF_CJK_BLUE_IS_TOP ) != 0 ) ||
( ( blue->flags & AF_CJK_BLUE_IS_RIGHT ) != 0 ) );
is_major_dir = FT_BOOL( edge->dir == axis->major_dir );
/* if it is a top zone, the edge must be against the major */
/* direction; if it is a bottom zone, it must be in the major */
/* direction */
if ( is_top_right_blue ^ is_major_dir )
{
FT_Pos dist;
AF_Width compare;
/* Compare the edge to the closest blue zone type */
if ( FT_ABS( edge->fpos - blue->ref.org ) >
FT_ABS( edge->fpos - blue->shoot.org ) )
compare = &blue->shoot;
else
compare = &blue->ref;
dist = edge->fpos - compare->org;
if ( dist < 0 )
dist = -dist;
dist = FT_MulFix( dist, scale );
if ( dist < best_dist )
{
best_dist = dist;
best_blue = compare;
}
}
}
if ( best_blue )
edge->blue_edge = best_blue;
}
}
FT_LOCAL_DEF( FT_Error )
af_cjk_hints_init( AF_GlyphHints hints,
AF_CJKMetrics metrics )
{
FT_Render_Mode mode;
FT_UInt32 scaler_flags, other_flags;
af_glyph_hints_rescale( hints, (AF_ScriptMetrics)metrics );
/*
* correct x_scale and y_scale when needed, since they may have
* been modified af_cjk_scale_dim above
*/
hints->x_scale = metrics->axis[AF_DIMENSION_HORZ].scale;
hints->x_delta = metrics->axis[AF_DIMENSION_HORZ].delta;
hints->y_scale = metrics->axis[AF_DIMENSION_VERT].scale;
hints->y_delta = metrics->axis[AF_DIMENSION_VERT].delta;
/* compute flags depending on render mode, etc. */
mode = metrics->root.scaler.render_mode;
scaler_flags = hints->scaler_flags;
other_flags = 0;
/*
* We snap the width of vertical stems for the monochrome and
* horizontal LCD rendering targets only.
*/
if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD )
other_flags |= AF_LATIN_HINTS_HORZ_SNAP;
/*
* We snap the width of horizontal stems for the monochrome and
* vertical LCD rendering targets only.
*/
if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD_V )
other_flags |= AF_LATIN_HINTS_VERT_SNAP;
/*
* We adjust stems to full pixels only if we don't use the `light' mode.
*/
if ( mode != FT_RENDER_MODE_LIGHT )
other_flags |= AF_LATIN_HINTS_STEM_ADJUST;
if ( mode == FT_RENDER_MODE_MONO )
other_flags |= AF_LATIN_HINTS_MONO;
scaler_flags |= AF_SCALER_FLAG_NO_ADVANCE;
hints->scaler_flags = scaler_flags;
hints->other_flags = other_flags;
return 0;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** C J K G L Y P H G R I D - F I T T I N G *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* snap a given width in scaled coordinates to one of the */
/* current standard widths */
static FT_Pos
af_cjk_snap_width( AF_Width widths,
FT_Int count,
FT_Pos width )
{
int n;
FT_Pos best = 64 + 32 + 2;
FT_Pos reference = width;
FT_Pos scaled;
for ( n = 0; n < count; n++ )
{
FT_Pos w;
FT_Pos dist;
w = widths[n].cur;
dist = width - w;
if ( dist < 0 )
dist = -dist;
if ( dist < best )
{
best = dist;
reference = w;
}
}
scaled = FT_PIX_ROUND( reference );
if ( width >= reference )
{
if ( width < scaled + 48 )
width = reference;
}
else
{
if ( width > scaled - 48 )
width = reference;
}
return width;
}
/* compute the snapped width of a given stem */
static FT_Pos
af_cjk_compute_stem_width( AF_GlyphHints hints,
AF_Dimension dim,
FT_Pos width,
AF_Edge_Flags base_flags,
AF_Edge_Flags stem_flags )
{
AF_CJKMetrics metrics = (AF_CJKMetrics) hints->metrics;
AF_CJKAxis axis = & metrics->axis[dim];
FT_Pos dist = width;
FT_Int sign = 0;
FT_Bool vertical = FT_BOOL( dim == AF_DIMENSION_VERT );
FT_UNUSED( base_flags );
FT_UNUSED( stem_flags );
if ( !AF_LATIN_HINTS_DO_STEM_ADJUST( hints ) )
return width;
if ( dist < 0 )
{
dist = -width;
sign = 1;
}
if ( ( vertical && !AF_LATIN_HINTS_DO_VERT_SNAP( hints ) ) ||
( !vertical && !AF_LATIN_HINTS_DO_HORZ_SNAP( hints ) ) )
{
/* smooth hinting process: very lightly quantize the stem width */
if ( axis->width_count > 0 )
{
if ( FT_ABS( dist - axis->widths[0].cur ) < 40 )
{
dist = axis->widths[0].cur;
if ( dist < 48 )
dist = 48;
goto Done_Width;
}
}
if ( dist < 54 )
dist += ( 54 - dist ) / 2 ;
else if ( dist < 3 * 64 )
{
FT_Pos delta;
delta = dist & 63;
dist &= -64;
if ( delta < 10 )
dist += delta;
else if ( delta < 22 )
dist += 10;
else if ( delta < 42 )
dist += delta;
else if ( delta < 54 )
dist += 54;
else
dist += delta;
}
}
else
{
/* strong hinting process: snap the stem width to integer pixels */
dist = af_cjk_snap_width( axis->widths, axis->width_count, dist );
if ( vertical )
{
/* in the case of vertical hinting, always round */
/* the stem heights to integer pixels */
if ( dist >= 64 )
dist = ( dist + 16 ) & ~63;
else
dist = 64;
}
else
{
if ( AF_LATIN_HINTS_DO_MONO( hints ) )
{
/* monochrome horizontal hinting: snap widths to integer pixels */
/* with a different threshold */
if ( dist < 64 )
dist = 64;
else
dist = ( dist + 32 ) & ~63;
}
else
{
/* for horizontal anti-aliased hinting, we adopt a more subtle */
/* approach: we strengthen small stems, round stems whose size */
/* is between 1 and 2 pixels to an integer, otherwise nothing */
if ( dist < 48 )
dist = ( dist + 64 ) >> 1;
else if ( dist < 128 )
dist = ( dist + 22 ) & ~63;
else
/* round otherwise to prevent color fringes in LCD mode */
dist = ( dist + 32 ) & ~63;
}
}
}
Done_Width:
if ( sign )
dist = -dist;
return dist;
}
/* align one stem edge relative to the previous stem edge */
static void
af_cjk_align_linked_edge( AF_GlyphHints hints,
AF_Dimension dim,
AF_Edge base_edge,
AF_Edge stem_edge )
{
FT_Pos dist = stem_edge->opos - base_edge->opos;
FT_Pos fitted_width = af_cjk_compute_stem_width(
hints, dim, dist,
(AF_Edge_Flags)base_edge->flags,
(AF_Edge_Flags)stem_edge->flags );
stem_edge->pos = base_edge->pos + fitted_width;
}
static void
af_cjk_align_serif_edge( AF_GlyphHints hints,
AF_Edge base,
AF_Edge serif )
{
FT_UNUSED( hints );
serif->pos = base->pos + ( serif->opos - base->opos );
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/**** ****/
/**** E D G E H I N T I N G ****/
/**** ****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
#define AF_LIGHT_MODE_MAX_HORZ_GAP 9
#define AF_LIGHT_MODE_MAX_VERT_GAP 15
#define AF_LIGHT_MODE_MAX_DELTA_ABS 14
static FT_Pos
af_hint_normal_stem( AF_GlyphHints hints,
AF_Edge edge,
AF_Edge edge2,
FT_Pos anchor,
AF_Dimension dim )
{
FT_Pos org_len, cur_len, org_center;
FT_Pos cur_pos1, cur_pos2;
FT_Pos d_off1, u_off1, d_off2, u_off2, delta;
FT_Pos offset;
FT_Pos threshold = 64;
if ( !AF_LATIN_HINTS_DO_STEM_ADJUST( hints ) )
{
if ( ( edge->flags & AF_EDGE_ROUND ) &&
( edge2->flags & AF_EDGE_ROUND ) )
{
if ( dim == AF_DIMENSION_VERT )
threshold = 64 - AF_LIGHT_MODE_MAX_HORZ_GAP;
else
threshold = 64 - AF_LIGHT_MODE_MAX_VERT_GAP;
}
else
{
if ( dim == AF_DIMENSION_VERT )
threshold = 64 - AF_LIGHT_MODE_MAX_HORZ_GAP / 3;
else
threshold = 64 - AF_LIGHT_MODE_MAX_VERT_GAP / 3;
}
}
org_len = edge2->opos - edge->opos;
cur_len = af_cjk_compute_stem_width( hints, dim, org_len,
(AF_Edge_Flags)edge->flags,
(AF_Edge_Flags)edge2->flags );
org_center = ( edge->opos + edge2->opos ) / 2 + anchor;
cur_pos1 = org_center - cur_len / 2;
cur_pos2 = cur_pos1 + cur_len;
d_off1 = cur_pos1 - FT_PIX_FLOOR( cur_pos1 );
d_off2 = cur_pos2 - FT_PIX_FLOOR( cur_pos2 );
u_off1 = 64 - d_off1;
u_off2 = 64 - d_off2;
delta = 0;
if ( d_off1 == 0 || d_off2 == 0 )
goto Exit;
if ( cur_len <= threshold )
{
if ( d_off2 < cur_len )
{
if ( u_off1 <= d_off2 )
delta = u_off1;
else
delta = -d_off2;
}
goto Exit;
}
if ( threshold < 64 )
{
if ( d_off1 >= threshold || u_off1 >= threshold ||
d_off2 >= threshold || u_off2 >= threshold )
goto Exit;
}
offset = cur_len & 63;
if ( offset < 32 )
{
if ( u_off1 <= offset || d_off2 <= offset )
goto Exit;
}
else
offset = 64 - threshold;
d_off1 = threshold - u_off1;
u_off1 = u_off1 - offset;
u_off2 = threshold - d_off2;
d_off2 = d_off2 - offset;
if ( d_off1 <= u_off1 )
u_off1 = -d_off1;
if ( d_off2 <= u_off2 )
u_off2 = -d_off2;
if ( FT_ABS( u_off1 ) <= FT_ABS( u_off2 ) )
delta = u_off1;
else
delta = u_off2;
Exit:
#if 1
if ( !AF_LATIN_HINTS_DO_STEM_ADJUST( hints ) )
{
if ( delta > AF_LIGHT_MODE_MAX_DELTA_ABS )
delta = AF_LIGHT_MODE_MAX_DELTA_ABS;
else if ( delta < -AF_LIGHT_MODE_MAX_DELTA_ABS )
delta = -AF_LIGHT_MODE_MAX_DELTA_ABS;
}
#endif
cur_pos1 += delta;
if ( edge->opos < edge2->opos )
{
edge->pos = cur_pos1;
edge2->pos = cur_pos1 + cur_len;
}
else
{
edge->pos = cur_pos1 + cur_len;
edge2->pos = cur_pos1;
}
return delta;
}
static void
af_cjk_hint_edges( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = &hints->axis[dim];
AF_Edge edges = axis->edges;
AF_Edge edge_limit = edges + axis->num_edges;
FT_PtrDist n_edges;
AF_Edge edge;
AF_Edge anchor = 0;
FT_Pos delta = 0;
FT_Int skipped = 0;
FT_Bool has_last_stem = FALSE;
FT_Pos last_stem_pos = 0;
/* we begin by aligning all stems relative to the blue zone */
FT_TRACE5(( "==== cjk hinting %s edges =====\n",
dim == AF_DIMENSION_HORZ ? "vertical" : "horizontal" ));
if ( AF_HINTS_DO_BLUES( hints ) )
{
for ( edge = edges; edge < edge_limit; edge++ )
{
AF_Width blue;
AF_Edge edge1, edge2;
if ( edge->flags & AF_EDGE_DONE )
continue;
blue = edge->blue_edge;
edge1 = NULL;
edge2 = edge->link;
if ( blue )
{
edge1 = edge;
}
else if ( edge2 && edge2->blue_edge )
{
blue = edge2->blue_edge;
edge1 = edge2;
edge2 = edge;
}
if ( !edge1 )
continue;
FT_TRACE5(( "CJKBLUE: edge %d @%d (opos=%.2f) snapped to (%.2f), "
"was (%.2f)\n",
edge1-edges, edge1->fpos, edge1->opos / 64.0, blue->fit / 64.0,
edge1->pos / 64.0 ));
edge1->pos = blue->fit;
edge1->flags |= AF_EDGE_DONE;
if ( edge2 && !edge2->blue_edge )
{
af_cjk_align_linked_edge( hints, dim, edge1, edge2 );
edge2->flags |= AF_EDGE_DONE;
}
if ( !anchor )
anchor = edge;
}
}
/* now we align all stem edges. */
for ( edge = edges; edge < edge_limit; edge++ )
{
AF_Edge edge2;
if ( edge->flags & AF_EDGE_DONE )
continue;
/* skip all non-stem edges */
edge2 = edge->link;
if ( !edge2 )
{
skipped++;
continue;
}
/* Some CJK characters have so many stems that
* the hinter is likely to merge two adjacent ones.
* To solve this problem, if either edge of a stem
* is too close to the previous one, we avoid
* aligning the two edges, but rather interpolate
* their locations at the end of this function in
* order to preserve the space between the stems.
*/
if ( has_last_stem &&
( edge->pos < last_stem_pos + 64 ||
edge2->pos < last_stem_pos + 64 ) )
{
skipped++;
continue;
}
/* now align the stem */
/* this should not happen, but it's better to be safe */
if ( edge2->blue_edge )
{
FT_TRACE5(( "ASSERTION FAILED for edge %d\n", edge2-edges ));
af_cjk_align_linked_edge( hints, dim, edge2, edge );
edge->flags |= AF_EDGE_DONE;
continue;
}
if ( edge2 < edge )
{
af_cjk_align_linked_edge( hints, dim, edge2, edge );
edge->flags |= AF_EDGE_DONE;
/* We rarely reaches here it seems;
* usually the two edges belonging
* to one stem are marked as DONE together
*/
has_last_stem = TRUE;
last_stem_pos = edge->pos;
continue;
}
if ( dim != AF_DIMENSION_VERT && !anchor )
{
#if 0
if ( fixedpitch )
{
AF_Edge left = edge;
AF_Edge right = edge_limit - 1;
AF_EdgeRec left1, left2, right1, right2;
FT_Pos target, center1, center2;
FT_Pos delta1, delta2, d1, d2;
while ( right > left && !right->link )
right--;
left1 = *left;
left2 = *left->link;
right1 = *right->link;
right2 = *right;
delta = ( ( ( hinter->pp2.x + 32 ) & -64 ) - hinter->pp2.x ) / 2;
target = left->opos + ( right->opos - left->opos ) / 2 + delta - 16;
delta1 = delta;
delta1 += af_hint_normal_stem( hints, left, left->link,
delta1, 0 );
if ( left->link != right )
af_hint_normal_stem( hints, right->link, right, delta1, 0 );
center1 = left->pos + ( right->pos - left->pos ) / 2;
if ( center1 >= target )
delta2 = delta - 32;
else
delta2 = delta + 32;
delta2 += af_hint_normal_stem( hints, &left1, &left2, delta2, 0 );
if ( delta1 != delta2 )
{
if ( left->link != right )
af_hint_normal_stem( hints, &right1, &right2, delta2, 0 );
center2 = left1.pos + ( right2.pos - left1.pos ) / 2;
d1 = center1 - target;
d2 = center2 - target;
if ( FT_ABS( d2 ) < FT_ABS( d1 ) )
{
left->pos = left1.pos;
left->link->pos = left2.pos;
if ( left->link != right )
{
right->link->pos = right1.pos;
right->pos = right2.pos;
}
delta1 = delta2;
}
}
delta = delta1;
right->link->flags |= AF_EDGE_DONE;
right->flags |= AF_EDGE_DONE;
}
else
/* 0 */
#endif
delta = af_hint_normal_stem( hints, edge, edge2, 0,
AF_DIMENSION_HORZ );
}
else
af_hint_normal_stem( hints, edge, edge2, delta, dim );
#if 0
printf( "stem (%d,%d) adjusted (%.1f,%.1f)\n",
edge - edges, edge2 - edges,
( edge->pos - edge->opos ) / 64.0,
( edge2->pos - edge2->opos ) / 64.0 );
#endif
anchor = edge;
edge->flags |= AF_EDGE_DONE;
edge2->flags |= AF_EDGE_DONE;
has_last_stem = TRUE;
last_stem_pos = edge2->pos;
}
/* make sure that lowercase m's maintain their symmetry */
/* In general, lowercase m's have six vertical edges if they are sans */
/* serif, or twelve if they are with serifs. This implementation is */
/* based on that assumption, and seems to work very well with most */
/* faces. However, if for a certain face this assumption is not */
/* true, the m is just rendered like before. In addition, any stem */
/* correction will only be applied to symmetrical glyphs (even if the */
/* glyph is not an m), so the potential for unwanted distortion is */
/* relatively low. */
/* We don't handle horizontal edges since we can't easily assure that */
/* the third (lowest) stem aligns with the base line; it might end up */
/* one pixel higher or lower. */
n_edges = edge_limit - edges;
if ( dim == AF_DIMENSION_HORZ && ( n_edges == 6 || n_edges == 12 ) )
{
AF_Edge edge1, edge2, edge3;
FT_Pos dist1, dist2, span;
if ( n_edges == 6 )
{
edge1 = edges;
edge2 = edges + 2;
edge3 = edges + 4;
}
else
{
edge1 = edges + 1;
edge2 = edges + 5;
edge3 = edges + 9;
}
dist1 = edge2->opos - edge1->opos;
dist2 = edge3->opos - edge2->opos;
span = dist1 - dist2;
if ( span < 0 )
span = -span;
if ( edge1->link == edge1 + 1 &&
edge2->link == edge2 + 1 &&
edge3->link == edge3 + 1 && span < 8 )
{
delta = edge3->pos - ( 2 * edge2->pos - edge1->pos );
edge3->pos -= delta;
if ( edge3->link )
edge3->link->pos -= delta;
/* move the serifs along with the stem */
if ( n_edges == 12 )
{
( edges + 8 )->pos -= delta;
( edges + 11 )->pos -= delta;
}
edge3->flags |= AF_EDGE_DONE;
if ( edge3->link )
edge3->link->flags |= AF_EDGE_DONE;
}
}
if ( !skipped )
return;
/*
* now hint the remaining edges (serifs and single) in order
* to complete our processing
*/
for ( edge = edges; edge < edge_limit; edge++ )
{
if ( edge->flags & AF_EDGE_DONE )
continue;
if ( edge->serif )
{
af_cjk_align_serif_edge( hints, edge->serif, edge );
edge->flags |= AF_EDGE_DONE;
skipped--;
}
}
if ( !skipped )
return;
for ( edge = edges; edge < edge_limit; edge++ )
{
AF_Edge before, after;
if ( edge->flags & AF_EDGE_DONE )
continue;
before = after = edge;
while ( --before >= edges )
if ( before->flags & AF_EDGE_DONE )
break;
while ( ++after < edge_limit )
if ( after->flags & AF_EDGE_DONE )
break;
if ( before >= edges || after < edge_limit )
{
if ( before < edges )
af_cjk_align_serif_edge( hints, after, edge );
else if ( after >= edge_limit )
af_cjk_align_serif_edge( hints, before, edge );
else
{
if ( after->fpos == before->fpos )
edge->pos = before->pos;
else
edge->pos = before->pos +
FT_MulDiv( edge->fpos - before->fpos,
after->pos - before->pos,
after->fpos - before->fpos );
}
}
}
}
static void
af_cjk_align_edge_points( AF_GlyphHints hints,
AF_Dimension dim )
{
AF_AxisHints axis = & hints->axis[dim];
AF_Edge edges = axis->edges;
AF_Edge edge_limit = edges + axis->num_edges;
AF_Edge edge;
FT_Bool snapping;
snapping = FT_BOOL( ( dim == AF_DIMENSION_HORZ &&
AF_LATIN_HINTS_DO_HORZ_SNAP( hints ) ) ||
( dim == AF_DIMENSION_VERT &&
AF_LATIN_HINTS_DO_VERT_SNAP( hints ) ) );
for ( edge = edges; edge < edge_limit; edge++ )
{
/* move the points of each segment */
/* in each edge to the edge's position */
AF_Segment seg = edge->first;
if ( snapping )
{
do
{
AF_Point point = seg->first;
for (;;)
{
if ( dim == AF_DIMENSION_HORZ )
{
point->x = edge->pos;
point->flags |= AF_FLAG_TOUCH_X;
}
else
{
point->y = edge->pos;
point->flags |= AF_FLAG_TOUCH_Y;
}
if ( point == seg->last )
break;
point = point->next;
}
seg = seg->edge_next;
} while ( seg != edge->first );
}
else
{
FT_Pos delta = edge->pos - edge->opos;
do
{
AF_Point point = seg->first;
for (;;)
{
if ( dim == AF_DIMENSION_HORZ )
{
point->x += delta;
point->flags |= AF_FLAG_TOUCH_X;
}
else
{
point->y += delta;
point->flags |= AF_FLAG_TOUCH_Y;
}
if ( point == seg->last )
break;
point = point->next;
}
seg = seg->edge_next;
} while ( seg != edge->first );
}
}
}
FT_LOCAL_DEF( FT_Error )
af_cjk_hints_apply( AF_GlyphHints hints,
FT_Outline* outline,
AF_CJKMetrics metrics )
{
FT_Error error;
int dim;
FT_UNUSED( metrics );
error = af_glyph_hints_reload( hints, outline );
if ( error )
goto Exit;
/* analyze glyph outline */
if ( AF_HINTS_DO_HORIZONTAL( hints ) )
{
error = af_cjk_hints_detect_features( hints, AF_DIMENSION_HORZ );
if ( error )
goto Exit;
af_cjk_hints_compute_blue_edges( hints, metrics, AF_DIMENSION_HORZ );
}
if ( AF_HINTS_DO_VERTICAL( hints ) )
{
error = af_cjk_hints_detect_features( hints, AF_DIMENSION_VERT );
if ( error )
goto Exit;
af_cjk_hints_compute_blue_edges( hints, metrics, AF_DIMENSION_VERT );
}
/* grid-fit the outline */
for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
{
if ( ( dim == AF_DIMENSION_HORZ && AF_HINTS_DO_HORIZONTAL( hints ) ) ||
( dim == AF_DIMENSION_VERT && AF_HINTS_DO_VERTICAL( hints ) ) )
{
af_cjk_hint_edges( hints, (AF_Dimension)dim );
af_cjk_align_edge_points( hints, (AF_Dimension)dim );
af_glyph_hints_align_strong_points( hints, (AF_Dimension)dim );
af_glyph_hints_align_weak_points( hints, (AF_Dimension)dim );
}
}
#if 0
af_glyph_hints_dump_points( hints );
af_glyph_hints_dump_segments( hints );
af_glyph_hints_dump_edges( hints );
#endif
af_glyph_hints_save( hints, outline );
Exit:
return error;
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** C J K S C R I P T C L A S S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/* this corresponds to Unicode 6.0 */
static const AF_Script_UniRangeRec af_cjk_uniranges[] =
{
/* Hangul Jamo */
AF_UNIRANGE_REC( 0x1100UL, 0x11FFUL ),
/* CJK Radicals Supplement */
AF_UNIRANGE_REC( 0x2E80UL, 0x2EFFUL ),
/* Kangxi Radicals */
AF_UNIRANGE_REC( 0x2F00UL, 0x2FDFUL ),
/* Ideographic Description Characters */
AF_UNIRANGE_REC( 0x2FF0UL, 0x2FFFUL ),
/* CJK Symbols and Punctuation */
AF_UNIRANGE_REC( 0x3000UL, 0x303FUL ),
/* Hiragana */
AF_UNIRANGE_REC( 0x3040UL, 0x309FUL ),
/* Katakana */
AF_UNIRANGE_REC( 0x30A0UL, 0x30FFUL ),
/* Bopomofo */
AF_UNIRANGE_REC( 0x3100UL, 0x312FUL ),
/* Hangul Compatibility Jamo */
AF_UNIRANGE_REC( 0x3130UL, 0x318FUL ),
/* Kanbun */
AF_UNIRANGE_REC( 0x3190UL, 0x319FUL ),
/* Bopomofo Extended */
AF_UNIRANGE_REC( 0x31A0UL, 0x31BFUL ),
/* CJK Strokes */
AF_UNIRANGE_REC( 0x31C0UL, 0x31EFUL ),
/* Katakana Phonetic Extensions */
AF_UNIRANGE_REC( 0x31F0UL, 0x31FFUL ),
/* Enclosed CJK Letters and Months */
AF_UNIRANGE_REC( 0x3200UL, 0x32FFUL ),
/* CJK Compatibility */
AF_UNIRANGE_REC( 0x3300UL, 0x33FFUL ),
/* CJK Unified Ideographs Extension A */
AF_UNIRANGE_REC( 0x3400UL, 0x4DBFUL ),
/* Yijing Hexagram Symbols */
AF_UNIRANGE_REC( 0x4DC0UL, 0x4DFFUL ),
/* CJK Unified Ideographs */
AF_UNIRANGE_REC( 0x4E00UL, 0x9FFFUL ),
/* Hangul Jamo Extended-A */
AF_UNIRANGE_REC( 0xA960UL, 0xA97FUL ),
/* Hangul Syllables */
AF_UNIRANGE_REC( 0xAC00UL, 0xD7AFUL ),
/* Hangul Jamo Extended-B */
AF_UNIRANGE_REC( 0xD7B0UL, 0xD7FFUL ),
/* CJK Compatibility Ideographs */
AF_UNIRANGE_REC( 0xF900UL, 0xFAFFUL ),
/* Vertical forms */
AF_UNIRANGE_REC( 0xFE10UL, 0xFE1FUL ),
/* CJK Compatibility Forms */
AF_UNIRANGE_REC( 0xFE30UL, 0xFE4FUL ),
/* Halfwidth and Fullwidth Forms */
AF_UNIRANGE_REC( 0xFF00UL, 0xFFEFUL ),
/* Kana Supplement */
AF_UNIRANGE_REC( 0x1B000UL, 0x1B0FFUL ),
/* Tai Xuan Hing Symbols */
AF_UNIRANGE_REC( 0x1D300UL, 0x1D35FUL ),
/* Enclosed Ideographic Supplement */
AF_UNIRANGE_REC( 0x1F200UL, 0x1F2FFUL ),
/* CJK Unified Ideographs Extension B */
AF_UNIRANGE_REC( 0x20000UL, 0x2A6DFUL ),
/* CJK Unified Ideographs Extension C */
AF_UNIRANGE_REC( 0x2A700UL, 0x2B73FUL ),
/* CJK Unified Ideographs Extension D */
AF_UNIRANGE_REC( 0x2B740UL, 0x2B81FUL ),
/* CJK Compatibility Ideographs Supplement */
AF_UNIRANGE_REC( 0x2F800UL, 0x2FA1FUL ),
AF_UNIRANGE_REC( 0UL, 0UL )
};
AF_DEFINE_SCRIPT_CLASS( af_cjk_script_class,
AF_SCRIPT_CJK,
af_cjk_uniranges,
/* 田 */
0x7530,
sizeof ( AF_CJKMetricsRec ),
(AF_Script_InitMetricsFunc) af_cjk_metrics_init,
(AF_Script_ScaleMetricsFunc)af_cjk_metrics_scale,
(AF_Script_DoneMetricsFunc) NULL,
(AF_Script_InitHintsFunc) af_cjk_hints_init,
(AF_Script_ApplyHintsFunc) af_cjk_hints_apply
)
/* END */
/***************************************************************************/
/* */
/* afindic.c */
/* */
/* Auto-fitter hinting routines for Indic scripts (body). */
/* */
/* Copyright 2007, 2011, 2012 by */
/* Rahul Bhalerao <rahul.bhalerao@redhat.com>, <b.rahul.pm@gmail.com>. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
static FT_Error
af_indic_metrics_init( AF_CJKMetrics metrics,
FT_Face face )
{
/* skip blue zone init in CJK routines */
FT_CharMap oldmap = face->charmap;
metrics->units_per_em = face->units_per_EM;
if ( FT_Select_Charmap( face, FT_ENCODING_UNICODE ) )
face->charmap = NULL;
else
{
af_cjk_metrics_init_widths( metrics, face );
#if 0
/* either need indic specific blue_chars[] or just skip blue zones */
af_cjk_metrics_init_blues( metrics, face, af_cjk_blue_chars );
#endif
af_cjk_metrics_check_digits( metrics, face );
}
FT_Set_Charmap( face, oldmap );
return AF_Err_Ok;
}
static void
af_indic_metrics_scale( AF_CJKMetrics metrics,
AF_Scaler scaler )
{
/* use CJK routines */
af_cjk_metrics_scale( metrics, scaler );
}
static FT_Error
af_indic_hints_init( AF_GlyphHints hints,
AF_CJKMetrics metrics )
{
/* use CJK routines */
return af_cjk_hints_init( hints, metrics );
}
static FT_Error
af_indic_hints_apply( AF_GlyphHints hints,
FT_Outline* outline,
AF_CJKMetrics metrics )
{
/* use CJK routines */
return af_cjk_hints_apply( hints, outline, metrics );
}
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** I N D I C S C R I P T C L A S S *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
static const AF_Script_UniRangeRec af_indic_uniranges[] =
{
#if 0
/* why this? */
AF_UNIRANGE_REC( 0x0100UL, 0xFFFFUL ),
#endif
/* Indic Range */
AF_UNIRANGE_REC( 0x0900UL, 0x0DFFUL),
/* Tibetan */
AF_UNIRANGE_REC( 0x0F00UL, 0x0FFFUL),
/* Limbu */
AF_UNIRANGE_REC( 0x1900UL, 0x194FUL),
/* Sundanese */
AF_UNIRANGE_REC( 0x1B80UL, 0x1BBFUL),
/* Meetei Mayak */
AF_UNIRANGE_REC( 0x1C80UL, 0x1CDFUL),
/* Syloti Nagri */
AF_UNIRANGE_REC( 0xA800UL, 0xA82FUL),
/* Sharada */
AF_UNIRANGE_REC( 0x11800UL, 0x118DFUL),
AF_UNIRANGE_REC( 0UL, 0UL)
};
AF_DEFINE_SCRIPT_CLASS( af_indic_script_class,
AF_SCRIPT_INDIC,
af_indic_uniranges,
/* XXX */
'o',
sizeof ( AF_CJKMetricsRec ),
(AF_Script_InitMetricsFunc) af_indic_metrics_init,
(AF_Script_ScaleMetricsFunc)af_indic_metrics_scale,
(AF_Script_DoneMetricsFunc) NULL,
(AF_Script_InitHintsFunc) af_indic_hints_init,
(AF_Script_ApplyHintsFunc) af_indic_hints_apply
)
/* END */
/***************************************************************************/
/* */
/* afloader.c */
/* */
/* Auto-fitter glyph loading routines (body). */
/* */
/* Copyright 2003-2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/* Initialize glyph loader. */
FT_LOCAL_DEF( FT_Error )
af_loader_init( AF_Module module )
{
AF_Loader loader = module->loader;
FT_Memory memory = module->root.library->memory;
FT_ZERO( loader );
af_glyph_hints_init( &loader->hints, memory );
return FT_GlyphLoader_New( memory, &loader->gloader );
}
/* Reset glyph loader and compute globals if necessary. */
FT_LOCAL_DEF( FT_Error )
af_loader_reset( AF_Module module,
FT_Face face )
{
FT_Error error = AF_Err_Ok;
AF_Loader loader = module->loader;
loader->face = face;
loader->globals = (AF_FaceGlobals)face->autohint.data;
FT_GlyphLoader_Rewind( loader->gloader );
if ( loader->globals == NULL )
{
error = af_face_globals_new( face, &loader->globals, module );
if ( !error )
{
face->autohint.data =
(FT_Pointer)loader->globals;
face->autohint.finalizer =
(FT_Generic_Finalizer)af_face_globals_free;
}
}
return error;
}
/* Finalize glyph loader. */
FT_LOCAL_DEF( void )
af_loader_done( AF_Module module )
{
AF_Loader loader = module->loader;
af_glyph_hints_done( &loader->hints );
loader->face = NULL;
loader->globals = NULL;
FT_GlyphLoader_Done( loader->gloader );
loader->gloader = NULL;
}
/* Load a single glyph component. This routine calls itself */
/* recursively, if necessary, and does the main work of */
/* `af_loader_load_glyph.' */
static FT_Error
af_loader_load_g( AF_Loader loader,
AF_Scaler scaler,
FT_UInt glyph_index,
FT_Int32 load_flags,
FT_UInt depth )
{
FT_Error error;
FT_Face face = loader->face;
FT_GlyphLoader gloader = loader->gloader;
AF_ScriptMetrics metrics = loader->metrics;
AF_GlyphHints hints = &loader->hints;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal internal = slot->internal;
FT_Int32 flags;
flags = load_flags | FT_LOAD_LINEAR_DESIGN;
error = FT_Load_Glyph( face, glyph_index, flags );
if ( error )
goto Exit;
loader->transformed = internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = internal->glyph_matrix;
loader->trans_delta = internal->glyph_delta;
inverse = loader->trans_matrix;
FT_Matrix_Invert( &inverse );
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform is needed */
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* copy the outline points in the loader's current */
/* extra points which are used to keep original glyph coordinates */
error = FT_GLYPHLOADER_CHECK_POINTS( gloader,
slot->outline.n_points + 4,
slot->outline.n_contours );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.outline.points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.outline.contours,
slot->outline.contours,
slot->outline.n_contours );
FT_ARRAY_COPY( gloader->current.outline.tags,
slot->outline.tags,
slot->outline.n_points );
gloader->current.outline.n_points = slot->outline.n_points;
gloader->current.outline.n_contours = slot->outline.n_contours;
/* compute original horizontal phantom points (and ignore */
/* vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline and run the */
/* automatic hinting process */
if ( metrics->clazz->script_hints_apply )
metrics->clazz->script_hints_apply( hints,
&gloader->current.outline,
metrics );
/* we now need to adjust the metrics according to the change in */
/* width/positioning that occurred during the hinting process */
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT )
{
FT_Pos old_rsb, old_lsb, new_lsb;
FT_Pos pp1x_uh, pp2x_uh;
AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ];
/* leftmost edge */
AF_Edge edge1 = axis->edges;
AF_Edge edge2 = edge1 +
/* rightmost edge */
axis->num_edges - 1;
if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) )
{
old_rsb = loader->pp2.x - edge2->opos;
old_lsb = edge1->opos;
new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
pp1x_uh = new_lsb - old_lsb;
pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 8;
if ( old_rsb < 24 )
pp2x_uh += 8;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
if ( loader->pp1.x >= new_lsb && old_lsb > 0 )
loader->pp1.x -= 64;
if ( loader->pp2.x <= edge2->pos && old_rsb > 0 )
loader->pp2.x += 64;
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x );
loader->pp2.x = FT_PIX_ROUND( pp2x );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta );
loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
/* good, we simply add the glyph to our loader's base */
FT_GlyphLoader_Add( gloader );
break;
case FT_GLYPH_FORMAT_COMPOSITE:
{
FT_UInt nn, num_subglyphs = slot->num_subglyphs;
FT_UInt num_base_subgs, start_point;
FT_SubGlyph subglyph;
start_point = gloader->base.outline.n_points;
/* first of all, copy the subglyph descriptors in the glyph loader */
error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.subglyphs,
slot->subglyphs,
num_subglyphs );
gloader->current.num_subglyphs = num_subglyphs;
num_base_subgs = gloader->base.num_subglyphs;
/* now read each subglyph independently */
for ( nn = 0; nn < num_subglyphs; nn++ )
{
FT_Vector pp1, pp2;
FT_Pos x, y;
FT_UInt num_points, num_new_points, num_base_points;
/* gloader.current.subglyphs can change during glyph loading due */
/* to re-allocation -- we must recompute the current subglyph on */
/* each iteration */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
pp1 = loader->pp1;
pp2 = loader->pp2;
num_base_points = gloader->base.outline.n_points;
error = af_loader_load_g( loader, scaler, subglyph->index,
load_flags, depth + 1 );
if ( error )
goto Exit;
/* recompute subglyph pointer */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
if ( subglyph->flags & FT_SUBGLYPH_FLAG_USE_MY_METRICS )
{
pp1 = loader->pp1;
pp2 = loader->pp2;
}
else
{
loader->pp1 = pp1;
loader->pp2 = pp2;
}
num_points = gloader->base.outline.n_points;
num_new_points = num_points - num_base_points;
/* now perform the transformation required for this subglyph */
if ( subglyph->flags & ( FT_SUBGLYPH_FLAG_SCALE |
FT_SUBGLYPH_FLAG_XY_SCALE |
FT_SUBGLYPH_FLAG_2X2 ) )
{
FT_Vector* cur = gloader->base.outline.points +
num_base_points;
FT_Vector* limit = cur + num_new_points;
for ( ; cur < limit; cur++ )
FT_Vector_Transform( cur, &subglyph->transform );
}
/* apply offset */
if ( !( subglyph->flags & FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ) )
{
FT_Int k = subglyph->arg1;
FT_UInt l = subglyph->arg2;
FT_Vector* p1;
FT_Vector* p2;
if ( start_point + k >= num_base_points ||
l >= (FT_UInt)num_new_points )
{
error = AF_Err_Invalid_Composite;
goto Exit;
}
l += num_base_points;
/* for now, only use the current point coordinates; */
/* we eventually may consider another approach */
p1 = gloader->base.outline.points + start_point + k;
p2 = gloader->base.outline.points + start_point + l;
x = p1->x - p2->x;
y = p1->y - p2->y;
}
else
{
x = FT_MulFix( subglyph->arg1, hints->x_scale ) + hints->x_delta;
y = FT_MulFix( subglyph->arg2, hints->y_scale ) + hints->y_delta;
x = FT_PIX_ROUND( x );
y = FT_PIX_ROUND( y );
}
{
FT_Outline dummy = gloader->base.outline;
dummy.points += num_base_points;
dummy.n_points = (short)num_new_points;
FT_Outline_Translate( &dummy, x, y );
}
}
}
break;
default:
/* we don't support other formats (yet?) */
error = AF_Err_Unimplemented_Feature;
}
Hint_Metrics:
if ( depth == 0 )
{
FT_BBox bbox;
FT_Vector vvector;
vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX;
vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY;
vvector.x = FT_MulFix( vvector.x, metrics->scaler.x_scale );
vvector.y = FT_MulFix( vvector.y, metrics->scaler.y_scale );
/* transform the hinted outline if needed */
if ( loader->transformed )
{
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
FT_Vector_Transform( &vvector, &loader->trans_matrix );
}
#if 1
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
#endif
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x );
slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y );
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width; ditto for */
/* digits if all have the same advance width */
#if 0
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
x_scale );
#else
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT &&
( FT_IS_FIXED_WIDTH( slot->face ) ||
( af_face_globals_is_digit( loader->globals, glyph_index ) &&
metrics->digits_have_same_width ) ) )
{
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
metrics->scaler.x_scale );
/* Set delta values to 0. Otherwise code that uses them is */
/* going to ruin the fixed advance width. */
slot->lsb_delta = 0;
slot->rsb_delta = 0;
}
else
{
/* non-spacing glyphs must stay as-is */
if ( slot->metrics.horiAdvance )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
}
#endif
slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance,
metrics->scaler.y_scale );
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance );
/* now copy outline into glyph slot */
FT_GlyphLoader_Rewind( internal->loader );
error = FT_GlyphLoader_CopyPoints( internal->loader, gloader );
if ( error )
goto Exit;
/* reassign all outline fields except flags to protect them */
slot->outline.n_contours = internal->loader->base.outline.n_contours;
slot->outline.n_points = internal->loader->base.outline.n_points;
slot->outline.points = internal->loader->base.outline.points;
slot->outline.tags = internal->loader->base.outline.tags;
slot->outline.contours = internal->loader->base.outline.contours;
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
Exit:
return error;
}
/* Load a glyph. */
FT_LOCAL_DEF( FT_Error )
af_loader_load_glyph( AF_Module module,
FT_Face face,
FT_UInt gindex,
FT_Int32 load_flags )
{
FT_Error error;
FT_Size size = face->size;
AF_Loader loader = module->loader;
AF_ScalerRec scaler;
if ( !size )
return AF_Err_Invalid_Argument;
FT_ZERO( &scaler );
scaler.face = face;
scaler.x_scale = size->metrics.x_scale;
/* XXX: TODO: add support for sub-pixel hinting */
scaler.x_delta = 0;
scaler.y_scale = size->metrics.y_scale;
/* XXX: TODO: add support for sub-pixel hinting */
scaler.y_delta = 0;
scaler.render_mode = FT_LOAD_TARGET_MODE( load_flags );
/* XXX: fix this */
scaler.flags = 0;
error = af_loader_reset( module, face );
if ( !error )
{
AF_ScriptMetrics metrics;
FT_UInt options = 0;
#ifdef FT_OPTION_AUTOFIT2
/* XXX: undocumented hook to activate the latin2 hinter */
if ( load_flags & ( 1UL << 20 ) )
options = 2;
#endif
error = af_face_globals_get_metrics( loader->globals, gindex,
options, &metrics );
if ( !error )
{
loader->metrics = metrics;
if ( metrics->clazz->script_metrics_scale )
metrics->clazz->script_metrics_scale( metrics, &scaler );
else
metrics->scaler = scaler;
load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_IGNORE_TRANSFORM;
load_flags &= ~FT_LOAD_RENDER;
if ( metrics->clazz->script_hints_init )
{
error = metrics->clazz->script_hints_init( &loader->hints,
metrics );
if ( error )
goto Exit;
}
error = af_loader_load_g( loader, &scaler, gindex, load_flags, 0 );
}
}
Exit:
return error;
}
/* END */
/***************************************************************************/
/* */
/* afmodule.c */
/* */
/* Auto-fitter module implementation (body). */
/* */
/* Copyright 2003-2006, 2009, 2011-2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/***************************************************************************/
/* */
/* ftautoh.h */
/* */
/* FreeType API for controlling the auto-hinter (specification only). */
/* */
/* Copyright 2012 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#define __FTAUTOH_H__
#ifdef FREETYPE_H
#error "freetype.h of FreeType 1 has been loaded!"
#error "Please fix the directory search order for header files"
#error "so that freetype.h of FreeType 2 is found first."
#endif
FT_BEGIN_HEADER
/**************************************************************************
*
* @section:
* auto_hinter
*
* @title:
* The auto-hinter
*
* @abstract:
* Controlling the auto-hinting module.
*
* @description:
* While FreeType's auto-hinter doesn't expose API functions by itself,
* it is possible to control its behaviour with @FT_Property_Set and
* @FT_Property_Get. The following lists the available properties
* together with the necessary macros and structures.
*
* Note that the auto-hinter's module name is `autofitter' for
* historical reasons.
*
*/
/**************************************************************************
*
* @property:
* glyph-to-script-map
*
* @description:
* The auto-hinter provides various script modules to hint glyphs.
* Examples of supported scripts are Latin or CJK. Before a glyph is
* auto-hinted, the Unicode character map of the font gets examined, and
* the script is then determined based on Unicode character ranges, see
* below.
*
* OpenType fonts, however, often provide much more glyphs than
* character codes (small caps, superscripts, ligatures, swashes, etc.),
* to be controlled by so-called `features'. Handling OpenType features
* can be quite complicated and thus needs a separate library on top of
* FreeType.
*
* The mapping between glyph indices and scripts (in the auto-hinter
* sense, see the @FT_AUTOHINTER_SCRIPT_XXX values) is stored as an
* array with `num_glyphs' elements, as found in the font's @FT_Face
* structure. The `glyph-to-script-map' property returns a pointer to
* this array which can be modified as needed. Note that the
* modification should happen before the first glyph gets processed by
* the auto-hinter so that the global analysis of the font shapes
* actually uses the modified mapping.
*
* The following example code demonstrates how to access it (omitting
* the error handling).
*
* {
* FT_Library library;
* FT_Face face;
* FT_Prop_GlyphToScriptMap prop;
*
*
* FT_Init_FreeType( &library );
* FT_New_Face( library, "foo.ttf", 0, &face );
*
* prop.face = face;
*
* FT_Property_Get( library, "autofitter",
* "glyph-to-script-map", &prop );
*
* // adjust `prop.map' as needed right here
*
* FT_Load_Glyph( face, ..., FT_LOAD_FORCE_AUTOHINT );
* }
*
*/
/**************************************************************************
*
* @enum:
* FT_AUTOHINTER_SCRIPT_XXX
*
* @description:
* A list of constants used for the @glyph-to-script-map property to
* specify the script submodule the auto-hinter should use for hinting a
* particular glyph.
*
* @values:
* FT_AUTOHINTER_SCRIPT_NONE ::
* Don't auto-hint this glyph.
*
* FT_AUTOHINTER_SCRIPT_LATIN ::
* Apply the latin auto-hinter. For the auto-hinter, `latin' is a
* very broad term, including Cyrillic and Greek also since characters
* from those scripts share the same design constraints.
*
* By default, characters from the following Unicode ranges are
* assigned to this submodule.
*
* {
* U+0020 - U+007F // Basic Latin (no control characters)
* U+00A0 - U+00FF // Latin-1 Supplement (no control characters)
* U+0100 - U+017F // Latin Extended-A
* U+0180 - U+024F // Latin Extended-B
* U+0250 - U+02AF // IPA Extensions
* U+02B0 - U+02FF // Spacing Modifier Letters
* U+0300 - U+036F // Combining Diacritical Marks
* U+0370 - U+03FF // Greek and Coptic
* U+0400 - U+04FF // Cyrillic
* U+0500 - U+052F // Cyrillic Supplement
* U+1D00 - U+1D7F // Phonetic Extensions
* U+1D80 - U+1DBF // Phonetic Extensions Supplement
* U+1DC0 - U+1DFF // Combining Diacritical Marks Supplement
* U+1E00 - U+1EFF // Latin Extended Additional
* U+1F00 - U+1FFF // Greek Extended
* U+2000 - U+206F // General Punctuation
* U+2070 - U+209F // Superscripts and Subscripts
* U+20A0 - U+20CF // Currency Symbols
* U+2150 - U+218F // Number Forms
* U+2460 - U+24FF // Enclosed Alphanumerics
* U+2C60 - U+2C7F // Latin Extended-C
* U+2DE0 - U+2DFF // Cyrillic Extended-A
* U+2E00 - U+2E7F // Supplemental Punctuation
* U+A640 - U+A69F // Cyrillic Extended-B
* U+A720 - U+A7FF // Latin Extended-D
* U+FB00 - U+FB06 // Alphab. Present. Forms (Latin Ligatures)
* U+1D400 - U+1D7FF // Mathematical Alphanumeric Symbols
* U+1F100 - U+1F1FF // Enclosed Alphanumeric Supplement
* }
*
* FT_AUTOHINTER_SCRIPT_CJK ::
* Apply the CJK auto-hinter, covering Chinese, Japanese, Korean, old
* Vietnamese, and some other scripts.
*
* By default, characters from the following Unicode ranges are
* assigned to this submodule.
*
* {
* U+1100 - U+11FF // Hangul Jamo
* U+2E80 - U+2EFF // CJK Radicals Supplement
* U+2F00 - U+2FDF // Kangxi Radicals
* U+2FF0 - U+2FFF // Ideographic Description Characters
* U+3000 - U+303F // CJK Symbols and Punctuation
* U+3040 - U+309F // Hiragana
* U+30A0 - U+30FF // Katakana
* U+3100 - U+312F // Bopomofo
* U+3130 - U+318F // Hangul Compatibility Jamo
* U+3190 - U+319F // Kanbun
* U+31A0 - U+31BF // Bopomofo Extended
* U+31C0 - U+31EF // CJK Strokes
* U+31F0 - U+31FF // Katakana Phonetic Extensions
* U+3200 - U+32FF // Enclosed CJK Letters and Months
* U+3300 - U+33FF // CJK Compatibility
* U+3400 - U+4DBF // CJK Unified Ideographs Extension A
* U+4DC0 - U+4DFF // Yijing Hexagram Symbols
* U+4E00 - U+9FFF // CJK Unified Ideographs
* U+A960 - U+A97F // Hangul Jamo Extended-A
* U+AC00 - U+D7AF // Hangul Syllables
* U+D7B0 - U+D7FF // Hangul Jamo Extended-B
* U+F900 - U+FAFF // CJK Compatibility Ideographs
* U+FE10 - U+FE1F // Vertical forms
* U+FE30 - U+FE4F // CJK Compatibility Forms
* U+FF00 - U+FFEF // Halfwidth and Fullwidth Forms
* U+1B000 - U+1B0FF // Kana Supplement
* U+1D300 - U+1D35F // Tai Xuan Hing Symbols
* U+1F200 - U+1F2FF // Enclosed Ideographic Supplement
* U+20000 - U+2A6DF // CJK Unified Ideographs Extension B
* U+2A700 - U+2B73F // CJK Unified Ideographs Extension C
* U+2B740 - U+2B81F // CJK Unified Ideographs Extension D
* U+2F800 - U+2FA1F // CJK Compatibility Ideographs Supplement
* }
*
* FT_AUTOHINTER_SCRIPT_INDIC ::
* Apply the indic auto-hinter, covering all major scripts from the
* Indian sub-continent and some other related scripts like Thai, Lao,
* or Tibetan.
*
* By default, characters from the following Unicode ranges are
* assigned to this submodule.
*
* {
* U+0900 - U+0DFF // Indic Range
* U+0F00 - U+0FFF // Tibetan
* U+1900 - U+194F // Limbu
* U+1B80 - U+1BBF // Sundanese
* U+1C80 - U+1CDF // Meetei Mayak
* U+A800 - U+A82F // Syloti Nagri
* U+11800 - U+118DF // Sharada
* }
*
* Note that currently Indic support is rudimentary only, missing blue
* zone support.
*
*/
#define FT_AUTOHINTER_SCRIPT_NONE 0
#define FT_AUTOHINTER_SCRIPT_LATIN 1
#define FT_AUTOHINTER_SCRIPT_CJK 2
#define FT_AUTOHINTER_SCRIPT_INDIC 3
/**************************************************************************
*
* @struct:
* FT_Prop_GlyphToScriptMap
*
* @description:
* The data exchange structure for the @glyph-to-script-map property.
*
*/
typedef struct FT_Prop_GlyphToScriptMap_
{
FT_Face face;
FT_Byte* map;
} FT_Prop_GlyphToScriptMap;
/**************************************************************************
*
* @property:
* fallback-script
*
* @description:
* If no auto-hinter script module can be assigned to a glyph, a
* fallback script gets assigned to it (see also the
* @glyph-to-script-map property). By default, this is
* @FT_AUTOHINTER_SCRIPT_CJK. Using the `fallback-script' property,
* this fallback value can be changed.
*
* {
* FT_Library library;
* FT_UInt fallback_script = FT_AUTOHINTER_SCRIPT_NONE;
*
*
* FT_Init_FreeType( &library );
*
* FT_Property_Set( library, "autofitter",
* "fallback-script", &fallback_script );
* }
*
* @note:
* This property can be used with @FT_Property_Get also.
*
* It's important to use the right timing for changing this value: The
* creation of the glyph-to-script map which eventually uses the
* fallback script value gets triggered either by setting or reading a
* face-specific property like @glyph-to-script-map, or by auto-hinting
* any glyph from that face. In particular, if you have already created
* an @FT_Face structure but not loaded any glyph (using the
* auto-hinter), a change of the fallback glyph will affect this face.
*
*/
/**************************************************************************
*
* @property:
* increase-x-height
*
* @description:
* For ppem values in the range 6~<= ppem <= `increase-x-height', round
* up the font's x~height much more often than normally. If the value
* is set to~0, which is the default, this feature is switched off. Use
* this property to improve the legibility of small font sizes if
* necessary.
*
* {
* FT_Library library;
* FT_Face face;
* FT_Prop_IncreaseXHeight prop;
*
*
* FT_Init_FreeType( &library );
* FT_New_Face( library, "foo.ttf", 0, &face );
* FT_Set_Char_Size( face, 10 * 64, 0, 72, 0 );
*
* prop.face = face;
* prop.limit = 14;
*
* FT_Property_Set( library, "autofitter",
* "increase-x-height", &prop );
* }
*
* @note:
* This property can be used with @FT_Property_Get also.
*
* Set this value right after calling @FT_Set_Char_Size, but before
* loading any glyph (using the auto-hinter).
*
*/
/**************************************************************************
*
* @struct:
* FT_Prop_IncreaseXHeight
*
* @description:
* The data exchange structure for the @increase-x-height property.
*
*/
typedef struct FT_Prop_IncreaseXHeight_
{
FT_Face face;
FT_UInt limit;
} FT_Prop_IncreaseXHeight;
/* */
FT_END_HEADER
/* END */
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_afmodule
FT_Error
af_property_get_face_globals( FT_Face face,
AF_FaceGlobals* aglobals,
AF_Module module )
{
FT_Error error = AF_Err_Ok;
AF_FaceGlobals globals;
if ( !face )
return AF_Err_Invalid_Argument;
globals = (AF_FaceGlobals)face->autohint.data;
if ( !globals )
{
/* trigger computation of the global script data */
/* in case it hasn't been done yet */
error = af_face_globals_new( face, &globals, module );
if ( !error )
{
face->autohint.data =
(FT_Pointer)globals;
face->autohint.finalizer =
(FT_Generic_Finalizer)af_face_globals_free;
}
}
if ( !error )
*aglobals = globals;
return error;
}
FT_Error
af_property_set( FT_Module ft_module,
const char* property_name,
const void* value )
{
FT_Error error = AF_Err_Ok;
AF_Module module = (AF_Module)ft_module;
if ( !ft_strcmp( property_name, "fallback-script" ) )
{
FT_UInt* fallback_script = (FT_UInt*)value;
module->fallback_script = *fallback_script;
return error;
}
else if ( !ft_strcmp( property_name, "increase-x-height" ) )
{
FT_Prop_IncreaseXHeight* prop = (FT_Prop_IncreaseXHeight*)value;
AF_FaceGlobals globals;
error = af_property_get_face_globals( prop->face, &globals, module );
if ( !error )
globals->increase_x_height = prop->limit;
return error;
}
FT_TRACE0(( "af_property_get: missing property `%s'\n",
property_name ));
return AF_Err_Missing_Property;
}
FT_Error
af_property_get( FT_Module ft_module,
const char* property_name,
void* value )
{
FT_Error error = AF_Err_Ok;
AF_Module module = (AF_Module)ft_module;
FT_UInt fallback_script = module->fallback_script;
if ( !ft_strcmp( property_name, "glyph-to-script-map" ) )
{
FT_Prop_GlyphToScriptMap* prop = (FT_Prop_GlyphToScriptMap*)value;
AF_FaceGlobals globals;
error = af_property_get_face_globals( prop->face, &globals, module );
if ( !error )
prop->map = globals->glyph_scripts;
return error;
}
else if ( !ft_strcmp( property_name, "fallback-script" ) )
{
FT_UInt* val = (FT_UInt*)value;
*val = fallback_script;
return error;
}
else if ( !ft_strcmp( property_name, "increase-x-height" ) )
{
FT_Prop_IncreaseXHeight* prop = (FT_Prop_IncreaseXHeight*)value;
AF_FaceGlobals globals;
error = af_property_get_face_globals( prop->face, &globals, module );
if ( !error )
prop->limit = globals->increase_x_height;
return error;
}
FT_TRACE0(( "af_property_get: missing property `%s'\n",
property_name ));
return AF_Err_Missing_Property;
}
FT_DEFINE_SERVICE_PROPERTIESREC(
af_service_properties,
(FT_Properties_SetFunc)af_property_set,
(FT_Properties_GetFunc)af_property_get )
FT_DEFINE_SERVICEDESCREC1(
af_services,
FT_SERVICE_ID_PROPERTIES, &AF_SERVICE_PROPERTIES_GET )
FT_CALLBACK_DEF( FT_Module_Interface )
af_get_interface( FT_Module module,
const char* module_interface )
{
/* AF_SERVICES_GET derefers `library' in PIC mode */
FT_UNUSED( module );
return ft_service_list_lookup( AF_SERVICES_GET, module_interface );
}
FT_CALLBACK_DEF( FT_Error )
af_autofitter_init( AF_Module module )
{
module->fallback_script = AF_SCRIPT_FALLBACK;
return af_loader_init( module );
}
FT_CALLBACK_DEF( void )
af_autofitter_done( AF_Module module )
{
af_loader_done( module );
}
FT_CALLBACK_DEF( FT_Error )
af_autofitter_load_glyph( AF_Module module,
FT_GlyphSlot slot,
FT_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_UNUSED( size );
return af_loader_load_glyph( module, slot->face,
glyph_index, load_flags );
}
FT_DEFINE_AUTOHINTER_INTERFACE(
af_autofitter_interface,
/* reset_face */
NULL,
/* get_global_hints */
NULL,
/* done_global_hints */
NULL,
/* load_glyph */
(FT_AutoHinter_GlyphLoadFunc)af_autofitter_load_glyph )
FT_DEFINE_MODULE(
autofit_module_class,
FT_MODULE_HINTER,
sizeof ( AF_ModuleRec ),
"autofitter",
/* version 1.0 of the autofitter */
0x10000L,
/* requires FreeType 2.0 or above */
0x20000L,
(const void*)&AF_INTERFACE_GET,
(FT_Module_Constructor)af_autofitter_init,
(FT_Module_Destructor) af_autofitter_done,
(FT_Module_Requester) af_get_interface )
/* END */
/* END */
#if defined(_MSC_VER)
# pragma warning(pop)
#endif // defined(_MSC_VER)
Reference in New Issue View Git Blame Copy Permalink